Samsung | T24E310AR | Samsung T24E310AR User Manual

Important Safety Instructions
Getting Started
Warning! Important Safety Instructions
Quick Setup Guide
yy Remote Control & Batteries (AAA x 2)
yy Quick Setup Guide / Safety Guide / Warranty Card (Not available in some locations)
(Please read the safety instructions below before installing and using the product.)
yy For better picture and audio quality, connect to a digital device using an HDMI
yy The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV.
If such a problem occurs, ask the manufacturer of the external device about the
HDMI version and, if out of date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
yy Power Cord
yy Screws (6)
yy Stand Connector
yy PC/DVI AUDIO IN input is not supported.
yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
yy Connecting through the HDMI cable may not be supported depending on the PC.
yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does
not work.
yy For Set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1 (STB) port.
yy Stand Base
Installing the Stand
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifications
may be changed without notice.
If you have any questions or comments relating to Samsung
products, please contact the SAMSUNG customer care centre.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture format menu for
best possible match.
yy Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
For India Only
This product is RoHS compliant.
Customer Care Centre
1800 588 889
603-77137477 (Overseas contact)
PHILIPPINES 1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe
landline and Mobile]
02-4222111 [Other landline]
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
BANGLADESH 9612300300
021 36 11 00
Web Site
For more information on safe disposal and recycling visit our website www. or contact our helpline number - 18002668282, 180030008282
For personal and non-commercial use only.
Usage is subject to following the guidelines in the Quick Setup Guide
and may not be available in all regions.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
and to protect it from overheating, these slots and openings must never be blocked or covered.
− Do not cover the slots and openings with a cloth or other materials.
− Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
− Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorised dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the
environment. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not
touch the power cord with wet hands.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact
an authorised dealer or service centre.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
when children, elderly or disabled people will be left alone in the house).
− Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause
the insulation to deteriorate.
• Be sure to contact an authorised service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage
to your set.
• Use only a properly grounded plug and receptacle.
− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible
at all times.
• Do not allow children to hang onto the product.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.
• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
021-8255 [CE]
SAUDI ARABIA 8002474357
support (English)
0800-Samsung (72678)
800-SAMSUNG (800 - 726 7864)
800-SAMSUNG (800 - 726 7864) (English)
183-CALL (183-2255)
8000-GSAM (8000-4726)
support (Arabic)
800-CALL (800-2255)
support (English)
06 5777444
support (English)
080 100 22 55
SOUTH AFRICA 0860 SAMSUNG (726 7864)
BOTSWANA 8007260000
08 197 267 864
0211 350370
MAURITIUS 23052574020
MOZAMBIQUE 847267864 / 827267864
Cote D’Ivoire 8000 0077
CAMEROON 7095-0077
0800 545 545
0800 300 300
0800 755 755 / 0685 889 900
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking on the product & accessories literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources House hold users
should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business user should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed other commercial
wastes for disposal.
This symbol indicates that high voltage is present inside. It
is dangerous to make any kind of contact with any internal
part of this product.
© 2015 Samsung Electronics Co., Ltd. All rights reserved.
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
How to use Edit Name
Display Modes (HDMI/DVI Input)
Edit Name lets you associate a device name to an input source. To
access Edit Name, enter Support menu and select Edit Name. Name
the device connected to the input jacks to make your input source
selection easier.
Optimal resolution:1366 x 768 pixels
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
720 x 400
640 x 480
832 x 624
640 x 480
✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI to DVI
640 x 480
640 x 480
800 x 600
800 x 600
should set the TV to DVI PC mode under Edit Name.
✎✎ You can only choose external devices that are connected to the TV. In the
cable, you should set the TV to DVI mode under Edit Name.
Source List, connected inputs will be highlighted.
Press INFO(I), you can see detailed information about the selected
external device.
✎✎ Information only available for the current connected source.
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1366 x 768
TV Controller (Panel Key)
Selecting the Media Play (USB)
Selecting the Menu
Selecting a Source
Power off
Function menu
Remote control sensor
the up/down/left/right directions.
✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
Picture Mode t
❑❑ Seeing Channels
Select your preferred picture type.
Channel List
■■ Dynamic: Suitable for a bright room.
Select a channel in the All Channels, Added Channels screen by pressing
the ▲/▼ buttons, and pressing the ENTERE button. Then you can
■■ Standard: Suitable for a normal environment.
watch the selected channel.
■■ Movie: Suitable for watching movies in a dark room.
✎✎ Using the remote control buttons with the Channel List.
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Channel Status Display icons
Your television has several setting options for picture quality control.
✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not
A channel deleted.
❑❑ Retuning Channels
You can change the desired area.
Auto Store
xxUse the remote control within 7 m from TV.
xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
Returns to the previous channel.
■■ Colour Tone: Select the colour temperature.
✎✎ Warm will be deactivated when the picture mode is Dynamic.
■■ Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most
of the time.
16:9: Sets the picture to 16:9 wide mode.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the
left, right and centre of the screen may cause image retention (screen burn)
which are not covered by the warranty.
✎✎ Fine tuned channels that have been saved are marked with an asterisk “*” on the
right-hand side of the channel number in the channel banner.
✎✎ This is available for analogue broadcasts only.
E-MANUAL: Not available.
: Provides a way to capture the images and audio.
:Turns the Cricket Mode on or off.
input on the TV.
■■ Digital Clean View: (Off / Low / Medium / High / Auto) If the broadcast
signal received by your TV is weak, you can activate the Digital Clean
View feature to reduce any static and ghosting that may appear on the
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode : (Auto / Off) Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for optimum
Exit the menu.
xxDepending on the input source, the picture size options may vary.
xxThe available items may differ depending on the selected mode.
xxSettings can be adjusted and stored for each external device connected to an
■■ HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
Displays information on the TV screen.
Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally.
A magnified or shrunk picture can be moved left, right, up, and down.
Screen Fit: Displays the full image without any cut-off when
HDMI(720p/1080i/1080p) signals are inputted.
✎✎ When the signal is weak, try other options until the best picture is displayed.
Selects the on-screen menu items and changes the
values seen on the menu.
Returns to the previous menu.
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A “ ” beside the channel indicates the channel has been deleted.
✎✎ The Add menu only appears for deleted channels.
Fine Tune
Changes channels.
Provides an optimal picture and sound for the
popular content in your geographical area.
Quickly select frequently used functions.
■■ Add / Delete: Delete or add a channel to display the channels you want.
Cuts off the sound temporarily.
Displays the main on-screen menu.
Views the Media Play (USB).
Set each channel using the Channel List menu options (Add / Delete).
Option menu items may differ depending on the channel status.
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is
weak or distorted, fine tune the channel manually.
Adjusts the volume.
When connecting a PC, you can only make changes to Backlight, Contrast,
Brightness and Sharpness.
Settings can be adjusted and stored for each external device connected to
the TV.
Lowering picture brightness reduces power consumption.
Picture Options
abnormal sound or no sound, reselect the sound standard required.
Displays the channel list on the screen.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Use these buttons according to the direction on
■■ Motion Lighting: Reduce power consumption by brightness control
adapted motion.
Use these buttons in a specific feature.
✎✎ Only available in Standard mode.
■■ Analogue Clean View: Reduces diagonal noise in picture caused by the
crosstalk of signals.
Picture Reset
Resets your current picture mode to its default settings.
■■ Picture Reset : Returns all picture values in the currently.
Audio connection
Component connection
AV connection
Blu-ray player / DVD
DVD / Home Theater
Picture Menu
Channel List
Alternately select Teletext ON, Double, Mix or OFF.
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
✎✎ According to channel source, Manual Store may be supported.
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there is
Press to directly access to channels.
VHF/UHF Antenna
Plug & Play (Initial Setup)
Scans for a channel manually and stores in the TV.
Turns the TV on and off.
TV Controller
✎✎ To close the Menu, Media Play (USB) List, or Source List, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move
Manual Store
✎✎ This remote control has Braille points on the Power, Channel, Volume and Enter buttons and can be used by visually impaired persons.
Displays and selects the available video
Power Input
(Depending on the country)
Scan mode for Southwest Asia: Full / Turbo
Scans for a channel automatically and stores in the TV.
Installing batteries (Battery size: AAA)
Remote Control
TV Rear Panel
TV Side Panel
Channel Menu
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI cable, you
■■ TV / AV / Component / HDMI1 / HDMI2/DVI
depending on the model.
set the TV to PC mode under Edit Name.
yy The rear panel may differ
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you should
PC connection
- English -
Changing the Input Source
HDMI connection
Blu-ray player / DVD / Settop box
Sound Menu
Setup Menu
Sound Mode t
■■ Standard: Selects the normal sound mode.
Set the menu language.
✎✎ Press ◄ or ► button to select menu language. (According to the different areas,
■■ Music: Emphasises music over voices.
some countries have only one language.)
■■ Movie: Provides the best sound for movies.
✎✎ The current time will appear every time you press the INFO button.
■■ Clear Voice: Emphasises voices over other sounds.
■■ Clock Set: Set the Day, Month, Year, Hour, Minute.
(standard sound mode only)
■■ On Time/Off Time
✎✎ Current time should be set first by Clock Set.
■■ Balance: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■ Reset: Resets the Equalizer to its default settings.
DTS TruSurround HD (DTS TruSurround) t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
✎✎ "DTS TruSurround HD" and "DTS TruSurround" are functionally equivalent.
Auto Volume
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
Contents: Select TV.
Channel: Select the channel to be played when the TV turns on
Volume: Select the volume level when TV turns on automatically.
■■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (Off, 30
min, 60 min, 90 min, 120 min, 150 min and 180 min)
✎✎ To cancel Sleep Timer, select Off.
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
Set so that a melody plays when the TV is turned Off, Low, Medium
sound output when the modulation signal is high or by raising the sound and High.
output when the modulation signal is low.
✎✎ The Melody does not play.
Speaker Select
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to
External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are
−− When no sound is output from the TV because the volume has
been reduced to minimum with the VOL – button.
−− When the TV is turned off by Sleep Timer function.
Auto Power Off
The TV will be automatically turned off when no user operation is
received for 4 hours.
turned off. You will hear sound through the external speakers only. When you
set Speaker Select to TV Speaker, both the TV’s speakers and the external
speakers are on. You will hear sound through both.
✎✎ If the Auto Power Off option is set to Off, the TV will stay on even if no
operations are performed on the TV.
✎✎ When Speaker Select is set to External Speaker, the volume and MUTE
Game Mode
buttons will not operate and the sound settings will be limited.
✎✎ If there is no video signal, both speakers will be mute.
TV Installation Type
This is the feature that set sound filter to fit into the installation condition
of TV. Adjust TV Sound to suit either stand or Wall Mount Installation.
Game Mode (Off / On):When you have connected a game console such
as PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic
gaming experience if you set Game Mode on.
yy Precautions and limitations for Game Mode
--Before disconnecting a game console and connecting another external device,
✎✎ For India Only.
Sound Reset
set Game Mode to Off.
--If you display the TV menu in Game Mode, the screen shakes slightly.
--Game Mode is not available when you’ve set the input source to TV.
--Set Game Mode to On only after connecting a game console. If you turn Game
■■ Sound Reset: Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
Mode on before you have attached the game console, you may notice reduced
picture quality.
When you set to Dual I - Dual II, the current sound mode is displayed
on the screen.
A2 Stereo
Audio Type
Dual I-II
Stereo ↔ Mono
Dual I ↔ Dual II
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
--If Game Mode is On: Picture Mode is set to Standard and Sound Mode is
set to Movie.
Dual I
Self Diagnosis
✎✎ For India Only.
■■ Picture Test: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■■ Sound Test: Use the built-in melody sound to check for sound problems.
Dual I
■■ Reset: Reset all settings to the factory defaults.
✎✎ If the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
• Hidden files or folders on the USB storage device are not
Support Menu
• PTP device is not supported.
• If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognised or may malfunction.
• The power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
• If a USB device connected to the TV is not recognised, the
list of files on the device is corrupted, or a file in the list is not
played, connect the USB device to a PC, format the device,
and check the connection.
• If a file you deleted from the PC is still found when you run
Media Play (USB), use the “Empty the Recycle Bin” function
on the PC to permanently delete the file.
• Photos only supports sequential jpeg format.
• The scene search and thumbnail functions are not supported in
the Videos.
• If the number of files and folders saved on a USB storage
device is approximately over 4000, the files and folders may not
appear and some folders may not be opened.
• The maximum displayed number of files, including sub folders,
in one folder of USB storage device is 2000.
• The media may not be playing smoothly when using the device
higher than USB 2.0.
• The file name only works in supported menu language. The
other language is not displayed properly.
❑❑ Indian Cinema Mode
Using the Indian Cinema Mode
When you set Indian Cinema Mode to On, the TV provides
optimal picture and sound for popular content.
✎✎ This function is only available on certain models in specific geographical
✎✎ After turning on the Indian Cinema Mode, press A to make a Magnifies or
shrinks 16:9 pictures vertically and/or horizontally. A magnified or shrunk
picture can be moved left, right, up, and down.
❑❑ Using the Media Play (USB)
Enjoy photos, music and movie files saved on a
USB Mass Storage Class (MSC) device.
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to
the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play
■■ Videos
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play (USB) menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file
(Play) button.
3. Press the ENTERE button or
✎✎ The maximum displayed number of partition is 4.
Using the Media Play (USB) Menu
1. Press the MENU button. Press the ▲ or ▼ button to select
Support, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press
the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Story Replay), then press the ENTERE button.
--The selected file is displayed on the top with its playing time.
--If video time information is unknown, playing time and the progress bar are
not displayed.
--During video playback, you can search using the ◄ and ► button.
--You can use ( ) (REW) and ( ) (FF) buttons during playback.
✎✎ In this mode, you can play movie clips contained in a game, but you cannot
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file or connected device, press
play the game itself.
TOOLS button in the file list, and then select Information.
yy Supported Subtitle Formats
✎✎ Need-to-Know List before using Media Play (USB)
• Supported file systems are FAT and NTFS.
• Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
• Media Play (USB) only supports USB Mass Storage Class
(MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives and
Flash Card Readers. Devices should be connected directly to
the TV’s USB port. Does not support smart devices connected
in MTP or PTP protocol.
• Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG
is not responsible for any data file damage or data loss.
• Do not disconnect the USB device while it is loading.
• The higher the resolution of the image, the longer it takes to
display on the screen.
• The maximum supported JPEG resolution is 15360 x 8640
• If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
• If a USB extension cable is used, the USB device may not be
recognised or the files on the device may not be read.
• The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
flash formats
Video Codec
DivX 3.11/4.12/5.x/6.0
Bit rate(Mbps)
DivX 3.11/4.12/5.x/6.0
MPEG 1/2/4
DivX 3.11/4.12/5.x/6.0
MPEG 1/2/4
H. 264
H. 264
MPEG 1/2/4
Sorenson H.263
MP3 / AC3 /
MP3 / AC3 /
AC3 / AAC /
MP3 / DD+
AC3 / MPEG /
File extension
.sub or .txt
Picture Format
Text Format
Text Format
Text Format
Text Format
xxWhile a photo list is displayed, press the
control to start the slide show.
■■ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select Deselect All.
■■ Copying the files to the other USB device
button in the file list to select the desired file.
1. Press the
button, the selected files copy to the other
2. When you press the
USB device.
✎✎ Available only when both USB devices are connected to the TV.
✎✎ The FAT32 file system cannot copy the file which size is more than 4GB.
✎✎ The maximum number of marked files for one folder is 999, if to be continued, 1
✎✎ During music playback, you can search using the ◄ and ► button.
✎✎ (REW) and (FF) buttons do not function during play.
✎✎ Only displays the files with MP3, WAV file extension. Other file extensions are not
more files can be marked in another folder.
Support File System
Play (Read)
Copy & Capture
Possible Solution
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
yy Make sure the Antenna cable is connected securely.
yy Please try Setup (Plug & Play) to add available channels to the channel list. Go to MENU - System - Setup (Plug & Play) and
wait for all available channels to be stored.
yy Verify the Antenna is positioned correctly.
The video is OK but there is no audio.
yy If you are using a HDMI connection, check the audio output setting on your PC.
yy If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
yy If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
yy Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
There is no sound or the sound is too low at
maximum volume.
yy Please check the volume of external device connected to your TV.
The picture is good but there is no sound.
yy Set the Speaker Select option to TV Speaker in the sound menu.
yy If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
yy If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
yy If you are using a HDMI cable, a separate audio cable is required.
yy If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
yy Check the cable connections. Make sure a video cable is not connected to an audio input.
yy For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
yy Make sure the wall outlet is working.
yy Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
yy Ensure the Sleep Timer is set to Off in the Time menu.
yy If your PC is connected to the TV, check your PC power settings.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
yy When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
yy Check cable connections (remove and reconnect all cables connected to the TV and external devices).
yy Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Subtitle Setting
You can select the slide show speed during
the slide show.
You can zoom into images in full screen
You can rotate images in full screen mode.
You can see detailed information about the
played file.
❑❑ DivX® Video On Demand
✎✎ Select the thumbnail screen to play the saved files on Media Play.
✎✎ You cannot change the channel or source to an external device. To change the
channel or the source to an external device, first stop story recording.
Story Replay feature is just an application provided by Samsung and
Samsung does not take any responsibility of its use by the user. The use/
intended use of the application is for the personal or private use of the
user only. User shall be responsible for complying with all other laws of the
land while using the application and shall further be liable for any damage,
penalty, legal action arising out of misuse of application, including without
limitation, infringement of Intellectual Property Rights.
Screen Capture
✎✎ At least after 15 seconds the next capture can be operated again.
Sound Recording
Shows the registration code authorised for the TV. If you connect to
After turning on the Joy Plus Feature, press
to make a recording of
the DivX web site and register with 10-digit registration code, you can
again to stop the recording.
the current sound, press
download the VOD activation file. Once you play it using Media Play (USB),
Items are stored in Music folder in Media Play (USB).
the registration is completed.
✎✎ If you press any key, Audio Recording will be stopped.
View Content
✎✎ For more information on DivX® VOD, visit
❑❑ Using the Cricket Mode/Sports Mode
Cricket Mode/Sports Mode t
This mode provides optimised condition for watching sports games.
Zoom: Pause playback and dived the picture into 9 parts. Select a part
to zoom it in. Press this button again to resume.
The picture will not display in full screen.
yy Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
yy Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
yy Replace the remote control batteries with the poles (+/–) in the right direction.
yy Clean the transmission window located on the top of the remote control.
yy Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.
The cable/set top box remote control does
not turn the TV on or off, or adjust the
yy Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
A “Mode Not Supported” message
yy Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
yy This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
yy Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
yy Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
yy The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or
every time the TV is turned off.
yy If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
from Store Demo mode to Home Use.
You have intermittent loss of audio or video.
yy Check the cable connections and reconnect them.
yy Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
yy This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
yy Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
yy To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
The wall mount kit allows you to mount the TV on the wall. For detailed
information on installing the wall mount, see the instructions provided
with the wall mount. Contact a technician for assistance when installing
the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you select to install the TV on your own.
Wall Mount Kit Specifications (VESA)
to other building materials, please contact your nearest dealer. If you install the
TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ Before enabling the Joy Plus Feature, the USB device should be connected first.
✎✎ Media Play (USB) mode not available.
✎✎ Since the necessary clamps, screws, and string are not supplied, please
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending on the type of
✎✎ Since the necessary clamps, screws, and string are not supplied, please
• Do not use screws that do not comply with the VESA standard
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
purchase these additionally.
• Do not use screws longer than the standard dimension, as they
✎✎ Screws may not be supplied with the product. In this case, please purchase the
• For wall mounts that do not comply with the VESA standard screw
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
may cause damage to the inside of the TV set.
specifications, the length of the screws may differ depending on
the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV on a wall.
to get into Media Play (USB).
Press ◄ or ► button to select Music for items of recording or Photos for
items of capturing.
VESA scew hole specs
(A * B) in millimeters
✎✎ Joy Plus Feature are for personal use only, not for commercial purpose and
75 x 75
communication to the public.
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
✎✎ This function is only available when the USB device is connected the TV, and Joy
This mode provides a way to capture the images and audio.
Press and the Joy Plus Feature will be turned on, or press MENU
button, enter Support Menu select Joy Plus Feature. Press again the
Joy Plus Feature will be turned off.
To prevent the TV from falling
• Standard dimensions for wall mount kits are shown in the table
You can set the default device for saving captured image files and recorded
audio files.
Joy Plus Feature
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
purchase these additionally.
✎✎ Install your wall mount on a solid wall perpendicular to the floor. When attaching
❑❑ Default Recording Device
❑❑ Using the Joy Plus Feature
Caution: Pulling, pushing, or climbing onto the TV may cause
Installing the Wall Mount
user may not use these features for commercial purposes without prior
✎✎ When Cricket Mode/Sports Mode is On, the picture and sound modes are set to ✎✎ The
approval from the copyright owners and/or to use it unlawfully.
Stadium automatically.
Samsung does not accept responsibility for any misuse of the service.
✎✎ If you turn the TV off while watching Cricket Mode/Sports Mode, the Cricket
Mode/Sports Mode will be disable.
Securing the TV to the Wall
Other Information
screw specifications.
After turning on the Joy Plus Feature, press
to make a current screen
Items are stored in Photos folder in Media Play (USB).
Plus Feature is on.
❑❑ Software Upgrade
Software Upgrade can be performed by downloading the latest firmware
from “” to a USB memory device.
screws of the following specifications.
✎✎ Note
xxInstall the TV near to the wall so that it does not fall backwards.
xxIt is safe to connect the string so that the clamps fixed on the wall are equal to
or lower than the clamps fixed on the TV.
xxUntie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is beside the
“K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the TV model.
❑❑ HD Connection Guide
You can read a guide to connect external devices for HD sources.
❑❑ Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
- 11 -
- 12 -
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
yy Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
yy A low signal can cause picture distortion. This is not a TV issue.
PC Connection
No Picture, No Video
The TV will not turn on.
- 10 -
yy Set your PC’s output resolution so it matches the resolutions supported by the TV.
When changing channels, the picture
freezes or is distorted or delayed.
2. To stop Story Replay, pess b. The recording is stored as a .plt file on
the USB device connected to the TV. Thumbnails of the story recordings
are then shown on the screen.
adjust the Equalizer in the Sound menu. (An over-modulated music file may cause
a sound problem.)
A “Mode Not Supported” message
yy If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input on the TV.
You can adjust the sound setting.
✎✎ A pop-up window will appear on the screen while recording is in progress. The
pop-up window displays the duration of the recording.
displayed, even if they are saved on the same USB device.
yy Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
yy Low signal level or bad quality can cause picture distortion. This is not a TV issue.
yy Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue TV.
The picture is black and white.
Sound Mode
✎✎ If the need to change Equalizer - when playing music, then exit Media Play (USB),
The picture is distorted: macroblock error,
small block, dots, pixelization
yy If the picture size is set to Screen Fit, change it to 16:9.
yy Change cable/satellite box resolution.
15360 x 8640
1024 x 768
CMYK, YCCK Colour space JPEG are not supported.
yy If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
yy Adjust the Cable/Set top box video output resolution to 1080i or 720p.
yy Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
There is a dotted line on the edge of the
You can adjust the picture setting.
You can play movie and music files
You can adjust the picture size to your
Picture Mode
Other Restrictions
■■ Music
1. Press the ◄ or ► button to select Music, then press the ENTERE
button in the Media Play (USB) menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
(Play) button.
3. Press the ENTERE button or
Possible Solution
yy Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
yy Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
Repeat Mode
Slide Show
■■ Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
WMA Lossless is not supported.
You can move the other file directly.
✎✎ The Mode in Background Music cannot be changed until the BGM has finished
Video Decoder
1. To Story Replay while watching TV, press b. This records audio in realtime, and captures the screen every 5 seconds in the meanwhile.
Stop Slide Show
/ Start Slide
You can start or stop a Slide Show.
automatically played during the Slide Show if the Background Music is set to On.
yy Supported Photo Formats
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
xxYou can move to other file using ◄ or ► button.
✎✎ Press TOOLS button and select Background Music. Music files can be
You can play the video with Subtitles. This
function only works if the subtitles are the
same file name as the video.
You can change the audio language if the
Audio Language
video has more than one language.
The TV image does not look as good as it
did in the store.
There is poor colour or brightness.
) (REW) or (
Story Replay
■■ Media Play (USB) - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Picture Size
) (FF) button.
yy Video content will not play, or not play correctly, if there is an error in the
content or the container.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy The menu may take longer to appear if the video’s bit rate exceeds
yy Video content can not be played, if there are many contents in one file.
Picture Quality
Colour is wrong or missing.
(Play) / ENTERE button on the remote
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using (
Other Restrictions
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
■■ Photos
1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play (USB) menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
(Play) button.
3. Press the ENTERE button or
Audio Codec
Audio Decoder
MPEG-4 timed text
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
SubStation Alpha
Advanced SubStation Alpha
MPEG-4 Timed text
yy Supported Video Formats
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
5W x 2
56.1 x 34.0 x 5.2 cm
56.1 x 37.6 x 12.3 cm
3.82 kg
4.14 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
Installation with a wall-mount.
10 cm
10 cm
59.8 cm
Without Stand
With Stand
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xxIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
1366 x 768
Screen Size
Dimensions (W x H x D)
Without Stand
With Stand
Securing the Installation Space
Display Resolution
10 cm
10 cm
10 cm
10 cm
10 cm
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with advanced features (multi-language subtitles, multiple audio tracks, chapters, smooth FF/
RW, etc.) streamed to your device.
These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition upgrading the latest firmware on web site ( → Support) by USB.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol,
DTS Premium Sound, DTS Digital Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the United States and/or other
countries. DTS, Inc. All Rights Reserved.
For DTS patents, see Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the
Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. ⓒ DTS, Inc. All Rights
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Open Source Licence Notice
Open Source used in this product can be found on the following webpage. (
Open Source License Notice is written only English.
- 13 -
- 14-
- 15 -
- 16 -
Download PDF