Samsung | DVD-HD850 | Samsung DVD-HD850 User Manual

DVDHD850 XSS-00_EngCover
13/01/2005
8:20
Page 2
DVD Player
DVD-HD850
ELECTRONICS
AK68-00
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 2
Precautions
5. Environmental info
1. Setting up
- Refer to the identification label located on the rear of your
player for its proper operating voltage.
- Install your player in a cabinet with adequate ventilation
holes. (7~10cm) Do not block ventilation holes on any of the
components for air circulation.
- Do not push the disc tray in by hand.
- Do not stack components.
- Be sure to turn all components off before moving the player.
- Before connecting other components to this player, be sure
to turn them off.
- Be sure to remove the disc and turn off the player after use,
especially if you don’t use it for a long time.
EZ VIEW
STANDBY/ON
PLAY
EZ VIEW
STANDBY/ON
LOADING
PLAY
EZ VIEW
STANDBY/ON
- The battery used in this product contains chemicals that
are harmful to the environment.
- So, dispose of batteries in the proper manner, according to
federal, state, and local regulations.
The product unit accompanying this user manual is licensed under certain intellectual property
rights of certain third parties. This license is limited to private non-commercial use by end-user
consumers for licensed contents. No rights are granted for commercial use. The license does not
cover any product unit other than this product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/OUR 11172-3 or ISO/OUR 13818-3 used or
sold in combination with this product unit. The license only covers the use of this product unit to
encode and/or decode audio files conforming to the ISO/OUR 11172-3 or ISO/OUR 13818-3. No
rights are granted under this license for product features or functions that do not conform to the
ISO/OUR 11172-3 or ISO/OUR 13818-3.
LOADING
PLAY
LOADING
2. For your safety
- This product utilizes a laser. Use of controls or adjustments
or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
- Do not open covers and do not repair yourself.
Refer servicing to qualified personal.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3. Caution
- Your player is not intended for industrial use but for domestic
purposes. Use of this product is for personal use only.
- Do not put any container filled with liquid or any small metal
objects on the player.
- Exterior influences such as lightning and static electricity can
affect normal operation of this player. If this occurs, turn the
player off and on again with the POWER button, or
disconnect and then reconnect the AC power cord to the AC
power outlet. The player will operate normally.
- When condensation forms inside the player due to sharp
changes in temperature, the player may not operate
correctly. If this occurs, leave the player at room temperature
until the inside of the player becomes dry and operational.
STANDBY/ON
EZ VIEW
PLAY
LOADING
4. Disc
- Do not clean record-cleaning sprays, benzene, thinner, or
other volatile solvents that may cause damage to the disc
surface.
- Do not touch the disc’s signal surface. Hold by the edges or
by one edge and the hole in the center.
- Wipe the dirt away gently; never wipe a cloth back and forth
over the disc.
ENG-2
ENG-3
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 4
TA B L E
OF
CONTENTS
Before you start
Accessories
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 1: Setup
Remote
Control
Batteries for
Remote Control
(AAA Size)
User’s Manual
Video/Audio
Cable
HDMI Cable
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2: Connections
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3: Basic Functions
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Clips Menu for MP3/WMA/JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MP3/WMA Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
Chapter 5: Changing Setup Menu
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
ENG-4
Chapter 6: Reference
Controlling a TV with the Remote control . . . . . . . . . . . . . . . . . . . . . . . . 58
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
ENG-5
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 6
SETUP
Chapter 1
Setup
SETUP
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
General Features
Note
- Discs which cannot be played with this
player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• CVD
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
Program Play (CD)
You can program tracks to play in desired order.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
MPEG4
This unit can play MPEG4 formats within an avi file.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
Recording Types
Disc Size
Max. Playing Time
12 Cm
Single-sided 240 min.
Double-sided 480 min.
8 Cm
Single-sided 80 min.
Double-sided 160 min.
12 Cm
74 min.
DVD
Audio
+
Video
VIDEO-CD
Audio
+
Video
AUDIO-CD
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PROGRESSIVE SCAN OUTPUTS
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
Disc Markings
~
NTSC
DIGITAL
SOUND
Play Region Number
ENG-6
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
The Region Number for this player
is described on the rear panel of the
player.
PAL broadcast system in UK, France,
Germany, etc.
Stereo disc
Digital Audio disc
DTS disc
3
MP3 disc
(525p)
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER.”
- DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the
on-screen menu.
Region Number
Dolby Digital disc
STEREO
Characteristics
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
Audio
COPY PROTECTION
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Disc Types (Logos)
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
ENG-7
DivX Certification
DivX, DivX Certified,
and associated logos are
trademarks of DivXNetworks,
Inc and are used under license
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 8
SETUP
SETUP
Setup
Rear Panel
Description
Front Panel Controls
1
9
2
10
OPEN/CLOSE
EZ VIEW
DVD-HD850
1
2
3
4
5
6 7
8
1
1.
STANDBY/ON (
)
When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
6.
STOP (
)
Stops disc play.
7.
REMOTE CONTROL RECEIVER
8.
SKIP (
) / SEARCH
Use to forward skip a scene or music.
SKIP (
) / SEARCH
Use to reverse skip a scene or music.
2.
DISC TRAY
Place the disc here.
3.
OPEN/CLOSE (
)
Press to open and close the disc tray.
9.
4.
DISPLAY
Operation indicators are displayed here.
10. PLAY/PAUSE (
)
Begin or pause disc play.
5.
EZ VIEW
The aspect ratio of a picture can easily be adjusted to
your TV's screen size (16:9 or 4:3).
3
4
1.
DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2.
COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y video.
- If Component(P-SCAN) Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
3.
5
6
4.
VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
S-Video.
5.
S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
S-Video.
6.
HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
- If you want to use a Video, S-Video or Component
Output, unplug DVI cable.
AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
Front Panel Display
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
1
1.
Disc type indicators
2.
Play / Pause
2
3
3.
Displays various messages
concerning operations such as PLAY,
STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
- If Component (P-SCAN) & HDMI Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
ENG-8
ENG-9
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 10
SETUP
Chapter 2
CONNECTIONS
Tour of the Remote Control
6.
17
1
7.
10.
3
18
4
5
19
20
21
6
22
11.
12.
13.
14.
15.
7
8
23
9
10
24
11
25
26
12
27
13
28
14
29
15
30
31
16
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
32
27.
33
28.
29.
30.
1.
2.
3.
4.
5.
DVD POWER Button
Turns the power on or off.
NUMBER Buttons
PROG Button
Allows you to program a specific order.
STEP Button
Advances play one frame at a time.
VOL (+, -) Buttons
Control volume.
31.
32.
33.
ENG-10
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (S-Video ➝ I-SCAN ➝ P-SCAN & HDMI)
- When the Video Output in Setup menu is set to Component(P-SCAN) & HDMI, the Video and S-Video
Outputs do not work.
ENG-11
Connections
8.
9.
2
TV/VIDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
SEARCH Buttons (
/
)
Allow you to search forward/backward through a disc.
STOP Button (
)
SKIP Buttons (
/
)
Use to skip the title, chapter or track.
MENU Button
Brings up the DVD player’s menu.
RETURN Button
Returns to a previous menu.
AUDIO Button
Use this button to access various audio functions on a disc.
ZOOM Button
Enlarges DVD picture.
VIDEO SEL. Button
Selects Video output format.
REPEAT A-B Button
Allows you to repeat play A-B disc.
BOOKMARK Button
TV POWER Button
Turns the TV’s power on or off.
CLEAR Button
Use to remove menus or status displays from the screen.
INSTANT SKIP Button
This function skips playback ahead 10 seconds.
INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
CH (
,
) Buttons
Channel selection.
OPEN/CLOSE (
) Button
To open and close the disc tray.
PLAY/PAUSE Button (
)
Begin/Pause disc play.
INFO Button
Displays the current disc mode.
DISC MENU Button
Brings up the Disc menu.
"❷➛❿ Buttons
ENTER/"
This button functions as a toggle switch.
ANGLE Button
Use to access various camera angles on a DVD.
EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
HDMI SEL. Button
HDMI or DVI Output resolution setup.
REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
SUBTITLE Button
SHUTTLE DIAL (Search mode)
Performs fast motion play.
JOG DIAL (Step mode)
Operates frame by frame play. In CD mode,
performs track search.
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 12
CONNECTIONS
CONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using an S-Video cable.
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the SVideo signal from the DVD player appears on your TV screen.
4
Set the Video Output to S-Video in the Display Setup menu.
(See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video Output to Component (I-SCAN) in the Display
Setup menu. (See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
Note
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-12
ENG-13
Connections
Connection to a TV (S-Video)
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 14
CONNECTIONS
CONNECTIONS
Connection to a TV (Progressive)
Connecting to a TV with DVI Jack
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
Using the HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
Connecting to a TV with HDMI Jack
4
Set the Video Output to Component (P-SCAN & HDMI) in the
Display Setup menu. (See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
1
Using the HDMI-HDMI cable connect the HDMI OUT terminal
on the rear of the DVD player to the HDMI IN terminal of your
TV.
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 480p, 720p, 768p, 1080i are selected in order.
The first press of the HDMI SEL. button, brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI automatically about
10 seconds later.
- If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
ENG-14
ENG-15
Connections
1
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 16
CONNECTIONS
CONNECTIONS
Connection to an Audio System (2 Channel Amplifier)
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. DVI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminal of your TV as described on pages 11 to 15.
3
Turn on the DVD player, TV, and Amplifier.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier.(See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-16
ENG-17
Connections
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 18
CONNECTIONS
Chapter 3
BASIC FUNCTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
3
Turn on the DVD player, TV, and Amplifier.
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
Once you select a menu language, you can change it by pressing the
button on the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
Place a disc gently into the
tray with the disc’s label
facing up.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
3
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Press the PLAY/PAUSE ( )
button or OPEN/CLOSE ( )
button to close the disc tray.
ENG-18
▼
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( ) button again, it will pick up
where you left off. (unless the disc is removed
or the player is unplugged, or if you press the
STOP ( ) button twice.)
ENG-19
Basic Functions
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminals of your TV as described on pages 11 to 15.
Playing a Disc
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 20
BASIC FUNCTIONS
4
Stopping Play
Press the STOP ( ) button
during play.
BASIC FUNCTIONS
Using the Search and Skip Functions
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
Searching through a Chapter or Track
During play, turn the
SHUTTLE DIAL or press
the SEARCH ( or )
button on the remote
control for more than 1
second.
5
Removing Disc
Press the OPEN/CLOSE
( ) button.
Screen stops, no sound.
To resume, press the PLAY/PAUSE (
once again.
2X, 4X, 64X, 128X
VCD
4X, 8X
CD
2X, 4X, 8X
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
Note
▼
7
Step Motion Play (Except
CD)
Turn the JOG DIAL clockwise
or press the STEP button on
the remote control during play.
▼
Slow Motion Play (Except
CD)
Press the SEARCH ( )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
DVD
Note
) button
If the player is left for about 5 minutes in pause
mode, it will stop.
8
During play, press the SEARCH ( or ) button
and press again to search at a faster speed.
Each time the button is pressed or Jog Dial is
turned, a new frame will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
You can only perform step motion play in the
forward direction.
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
Reverse slow motion play will not work.
Note
This (
ENG-20
) icon indicates an invalid button press.
Skipping Tracks
During play, press the SKIP
(
or
) button.
- When playing a DVD, if you press the SKIP ( )
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP ( )
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
VCD and you press the
button, it moves
forward 5 minutes. If you press the
button,
it moves backward 5 minutes.
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-21
Basic Functions
▼
6
Pausing Play
Press the PLAY/PAUSE
( ) or STEP button on the
remote control during play.
▼
Note
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 22
BASIC FUNCTIONS
BASIC FUNCTIONS
Using the Display Function
4
When Playing a DVD/VCD/CD
▼
1
You can select Info in the function menu by
pressing the MENU button.
To make the screen
disappear, press the INFO
button again.
During play, press the
INFO button on the remote
control.
Note
2
Title
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
DVD
DVD
Title
Chapter
01
Chapter 02
Time
Audio
Subtitle
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
0:00:13
ENG 5.1CH
Off
Time
VCD
▼
VCD
Track 01
Time 0:00:48
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
Audio
Subtitle
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language. In the example, the soundtrack is played in English
5.1CH.
A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
CD
CD
Track 01
Time 0:00:48
▼
3
Press the ➛/❿ buttons to
make the desired setup and
then press the ENTER
button.
ENG-22
You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
ENG-23
Basic Functions
Press the "/❷ buttons to
select the desired item.
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 24
BASIC FUNCTIONS
BASIC FUNCTIONS
Using the Disc and Title Menu
Using the Function Menu
Using the Disc Menu (DVD)
Using the Function Menu (DVD/VCD)
1
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
Press the MENU button
during playback.
2
Press ENTER key
for Disc Menu
Using the Title Menu (DVD)
2
Press the "/❷ buttons to
select Function, then press
the ❿ or ENTER button.
- Info (See pages 22 to 23)
- Zoom (See page 36)
- Bookmark
(See pages 34 to 35)
- Repeat (See pages 26 to 27)
- EZ View
(See pages 30 to 30)
3
During the playback of a
DVD disc, press the MENU
button on the remote
control.
Press the "/❷ buttons to
select one of the five
functions. Then press the
❿ or ENTER button to
access the function.
Info
Zoom
Bookmark
Repeat
EZ View
▼
1
Basic Functions
Press the "/❷ buttons to
select Disc Menu, then
press the ❿ or ENTER
button.
Note
- Depending on a disc, the Disc Menu may not
work.
- You can also use the Disc Menu, using the DISC
MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
Note
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
2
Press the "/❷ buttons to
select Title Menu, then
press the ❿ or ENTER
button.
Press ENTER key
for Title Menu
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-24
You can also directly select these functions
using their respective buttons on the remote
control.
ENG-25
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 26
BASIC FUNCTIONS
BASIC FUNCTIONS
Repeat Play
Slow Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD/CD
When playing a DVD/VCD
1
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
During play, press the
PLAY/PAUSE ( ) button.
DVD
Press the ➛/❿ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Off
01
T
01 A - B
REPEAT
ENTER
DVD repeats play by chapter or title, CD and
VCD repeat play by disc or track.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
T
VCD/CD
Off
T
01
D
01 A - B
REPEAT
ENTER
2
Press the SEARCH ( )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
3
To return to normal play,
press REPEAT button
again, then press the ➛/❿
buttons to select Off and
press ENTER button.
DVD
Off
01
T
01 A - B
REPEAT
Off
T
01
D
01 A - B
REPEAT
ENTER
To set A-B REPEAT, set (A) first, then set (B)
after the following slow play time has elapsed:
1/8x: wait 40 seconds, then press B
Press the REPEAT button
on the remote control.
Press the ➛/❿ buttons to
select A-B.
4
Press the ENTER button at
the point where you want
repeat play to start (A).
B is automatically
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
1/4x: wait 20 seconds, then press B
1/2x: wait 10 seconds, then press B
5
ENTER
VCD/CD
The disc will play from A to B repeatedly at the
speed you chose.
▼
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
▼
3
Using the A-B Repeat function
1. Press the REPEAT A-B button at the point where you want repeat play to start (A).
B is automatically highlighted.
2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Basic Functions
▼
2
Note
- Depending on a disc, the Repeat function may
not work.
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-26
To return to normal play,
press the CLEAR button and
then press the PLAY/PAUSE
( ) button.
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
Using the A-B Repeat function
1. During slow playback, press the REPEAT A-B button at the point where you want repeat play to
start (A). B is automatically highlighted.
2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button and then press the PLAY/PAUSE( ) button.
ENG-27
DVDHD850 XSS-00_Eng1
13/01/2005
8:21
Page 28
BASIC FUNCTIONS
Chapter 4
A D VA N C E D F U N C T I O N S
Program Play & Random Play
Program Play (CD)
Program Play allows you to select the order in which you want tracks to play.
To play back using aspect ratio (DVD)
1
During play, press the
PROG button.
Press the ➛/❿ buttons to
select PROGRAM.
Press the ENTER button.
PROGRAM
➛!❿
❿
RANDOM
▼
3
Track
01
05
09
13
02
06
10
14
03
07
11
15
Program Order
04
08
12
16
------
------
------
------
- To return to the previous menu screen, press
the RETURN button.
- To cancel the selected program order, press
the CLEAR button.
- This unit can support a maximum of 20
programmed tracks.
WIDE SCREEN
EZ VIEW
If you are using a 16:9 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- WIDE SCREEN
Displays the content of the DVD title in 16:9 aspect ratio.
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will
look vertically stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
4
Press the PLAY/PAUSE
( ) button.
The disc will be played in
programmed order.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Random Play plays a disc's tracks in random order.
Press the PROG button.
2
Press the ➛/❿ buttons to
select RANDOM.
Press the ENTER button.
PROGRAM
➛!❿
❿
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
Random Play (CD)
1
To make the aspect ratio bar disappear,
press the CLEAR button.
RANDOM
Note
- Depending on a disc, the Program and Random
Play functions may not work.
- While in playback mode, press the CLEAR button
on the remote control to cancel Program Play or
Random Play.
ENG-28
ENG-29
Advanced
Functions
Press the "/❷/➛/❿
buttons to select the first
track to add to the program.
Press the ENTER button.
The selection numbers
appear in the Program
Order box.
PROGRAM 01
Press the EZ VIEW
button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display
Setup menu.
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup menu.
(See pages 52 to 54).
▼
2
Adjusting the Aspect Ratio (EZ View)
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 30
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
If you are using a 4:3 TV
Selecting the Audio Language
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
- Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
- 4:3 Pan Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears.
The picture will look vertically stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/CD)
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
AUDIO
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
When playing a VCD or CD,
you can select among
Stereo, Right or Left.
VCD/CD
Press the ➛/❿ buttons to
select the desired Audio on
MPEG4 then press the
ENTER .
MPEG4
Stereo
AUDIO
This function may behave differently depending on the type of disc.
Advanced
Functions
2
To remove the AUDIO
icon, press the CLEAR or
RETURN button.
Note
- This function depends on audio languages are
encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 48.
ENG-30
ENG-31
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 32
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Selecting the Subtitle Language
Changing the Camera Angle
You can select a desired subtitle quickly and easily with the SUBTITLE button.
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the SUBTITLE button (DVD)
Using the ANGLE button (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
abbreviations.
1
Press the ANGLE button,
then the ANGLE icon will
appear with the current
angle number and the
number of angles
available.
DVD
Off
SUBTITLE
2
Press the ➛/❿ buttons to
select the desired subtitle
language on a MPEG4 then
press the ENTER .
4/6
ANGLE
Press the ANGLE button
repeatedly to select the
desired angle. To remove
the ANGLE icon, press the
CLEAR or RETURN
button.
MPEG4
None
Note
If the disc has only one angle, this feature won’t
work. Currently, very few discs have this
feature.
Using the Instant Replay function (DVD)
2
To remove the SUBTITLE
icon, press the CLEAR or
RETURN button.
If you miss a scene, you can see it again using this function.
Note
- Depending on DVDs, you have to change the
desired subtitle in the Disc Menu. Press the
DISC MENU button.
- This function depends on what subtitles are
encoded on the disc and may not work on all
DVDs.
Press the INSTANT
REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
49.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP
button.
- Playback will skip ahead
10 seconds.
Note
Depending on the disc, these functions may not
work.
ENG-32
ENG-33
Advanced
Functions
Using the Instant Replay/Skip Function
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 34
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
Using the Bookmark Function (DVD/VCD)
Recalling a Marked Scene
1
During play, press the
BOOKMARK button on
the remote control.
1
During play, press the
BOOKMARK button on the
remote control.
2
Press the ➛/❿ buttons to
select a marked scene.
Using the MENU button.
During play, press the MENU
button on the remote control.
Press the $/❷ buttons to
select Function, then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
3
EZ View
Press the PLAY/PAUSE
(
) button to skip to
the marked scene.
Info
Zoom
Bookmark
Advanced
Functions
Press the $/❷ buttons to
select Bookmark, then
press the ❿ or ENTER
button.
Clearing a Bookmark
Repeat
EZ View
1
During play, press the
BOOKMARK button on
the remote control.
2
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
2
Note
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
Press the ➛/❿ buttons to
select the bookmark
number you want to delete.
- Depending on a disc, the Bookmark function may
not work.
3
Press the CLEAR button
to delete a bookmark
number.
ENG-34
ENG-35
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 36
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Using the Zoom Function
Clips Menu for MP3/WMA/JPEG/MPEG4
Using the Zoom Function (DVD/VCD)
Discs with MP3/WMA/JPEG/MPEG4 contain individual songs, pictures or movies
that can be organized into folders as shown below. They are similar to how you use
your computer to put files into different folders.
1
During play, press the ZOOM
button on the remote control.
Open the disc tray.
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
Using the MENU button.
During play or pause mode,
press the MENU button on
the remote control.
Press the $/❷ buttons to
select Function, then
press the ❿ or ENTER
button.
Off
ROOT
ROOT
WMA
JPEG
MP3
MPEG4
Info
Parent Folder, Current Folder Folders and Files in
Current Folder
and Peer Folders
Zoom
Bookmark
Repeat
EZ View
Press the $/❷ buttons to
select Zoom, then press
the ❿ or ENTER button.
Info
Zoom
Bookmark
Repeat
EZ View
Press the $/❷ or ➛/❿
buttons to select the part
of the screen you want to
zoom in on.
Press the ENTER button.
: Name of currently playing file.
-
: MP3 file icon.
-
: Current Playback Time.
-
: WMA file icon.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
-
: JPEG file icon.
-
: AVI file icon.
-
: Folder icon.
-
: Current Folder icon.
Advanced
Functions
▼
2
-
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
During VCD play, press ENTER to zoom in
2X/Normal in order.
Folder Selection
The folder can only be selected in the Stop mode.
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the $/❷ buttons to select “..” and
press ENTER to go to the parent folder.
- To select the Peer Folder
Press the ➛/❿ buttons to highlight the left window.
Press the $/❷ buttons to select the desired folder,
then press ENTER.
Root
WMA
JPEG
Parent Folder
MP3
MUSIC
- To select the Sub-Folder
Press the ➛/❿ buttons to highlight the right window.
Press the $/❷ buttons to select the desired folder,
then press ENTER.
Current Folder
1st
Sub-Folders
2nd
SONG FILE 1
Peer Folders
SONG FILE 2
SONG FILE 3
MPEG4 FILES
ENG-36
ENG-37
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 38
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
CD-R MP3/WMA file
MP3/WMA Playback
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
O f ff
00:00:23
ROOT
When you record MP3 or WMA files on CD-R, please refer
to the following.
1_mp3
ROOT
MP3
WBM
e cAa u s e Yo u
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Cactus
Sad Day
Wonderful
▼
2
Press the $/❷ or ➛/❿
buttons to select a song
file.
Press ENTER to begin
playback of the song file.
When a disc that contains both MP3
and WMA files, only one type will
play, not both.
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft
Inc) and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 3000 files and 300 folders
per disc.
O f ff
0 0 : 0 0 :: 22 33
ROOT
MP3
WMA
B
1 _em
ca
p3
u s e Yo u
..
B e c a u s e Yo u
Cactus
B e c a u s e Yo u
Sad Dayu
Cactus
Wonderful
Sad Day
Wonderful
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CLEAR button.
ENG-38
ENG-39
Advanced
Functions
Repeat/Random playback
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 40
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Using the Display Funktion
MPEG4 Playback
MPEG4 Play Function
1
AVI files are used to contain the audio and video data. Only AVI format files with the
“.avi” extensions can be played.
During play, press the
MENU button on the
remote control.
1
O
Offf f
00:00:23
ROOT
ROOT
WMA
▼
Open the disc tray.
Place the disc on the tray.
Close the tray.
1_mp3
JBPeEc G
a u s e Yo u
2
CP
a c3 t u s
M
SP
a dE G
D 4a y
M
Wonderful
2
Press the $/❷ buttons to
select to the desired item.
Press the ➛/❿ buttons to
select to the desired setup
and then press ENTER.
Press the $/❷ or ➛/❿
buttons to select an avi file
(DivX/XiviD) and then
press ENTER button.
3
DivX
To make the screen
disappear, press the INFO
button.
O
Offff
Title
Time
Audio
Subtitle
0 0 : 00 00 :: 2233
You may use the number buttons of the remote
control to directly access a title or to start the
playback from the desired.
1_mp3
Size
01
0:00:13
MP3 1/8
None
640x272
BWeocnaduesref uYo
l u
Cactus
Wonderful
Note
To access the desired title when there is more than one in the disc.
Repeat Playback
Title
Allows playback of the film from a desired time. You must enter the starting time as a reference.
Press the REPEAT button to
change playback mode.
There are 4 modes, such as
Off, Folder, Title an A-B (a
distance between two points
appointed by user)
Time
Audio
Subtitle
Off
F
FD
T
01 A - B
REPEAT
ENTER
Size
• Folder (
F
• Title (
) : repeats the title that is playing.
T
To select the desired language of the title soundtrack. The MP3 and WMA are supported. You can
use this function using the AUDIO button.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. You
can use this function using the SUBSTITLE button.
File Size has a relationship with resolution of a title. The larger file size is, the higher resolution is
displayed. If the file resolution is small it scale up automatically. So you can see the larger screen
) : repeats the AVI files which have the same extension in the current folder.
• A-B : repeats a segment of the file that you select.
ENG-40
ENG-41
Advanced
Functions
Sad Day
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 42
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
MPEG4 Function Description
Function
Skip
or
)
(
Search
(
or
)
Slow Motion
Play
Step Motion
Play
ZOOM
Description
Reference page
During play, press the
or
button, it moves forward
or backward 5 minutes.
During play, press the SEARCH
( or ) button and press
again to search at a faster
speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
Allows you to search at a
slower speed in an AVI file.
(1/8X, 1/4X, 1/2X)
Each time the STEP button
is pressed, a new frame will
appear.
2X/4X/2X/Normal in order
Picture CD Playback
Off
1
-
Select the desired folder.
ROOT
ROOT
WMA
JPEG
MP3
MPEG4
-
2
Off
Press the $/❷ buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
P 20
ROOT
..
WMA
1
JPEG
2
MP3
3
P 20
P 36
3
- These functions may not work depending on MPEG4 file.
CD-R AVI file
- Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Album Screen
•
Slide Show
: Returns to the Album Screen.
• To see the next six pictures, press the
• To see the previous six pictures, press the
TIMER:
ENTER RETURN
button.
button.
This unit supports all resolutions up to maximum below.
Rotation
DivX3.11 & DivX4 & XviD
Bitrate may fluctuate:
Device may skip decoding the high
bitrate portions and begin decoding
again when Bitrate returns to
normal.
DivX5
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
720 x 480 @30fps
720 x 576 @25fps
: Maximum bitrate : 4Mbps
Zoom
: Press the $/❷ or ➛/❿ buttons to select the
part of the screen you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 4X. (2X ➝ 4X ➝ 2X ➝ Normal)
Note
• Some MPEG-4 files created on a personal
computer may not be play back. That is why Codec Type, Version and Higher resolution over
specification is not supported.
• This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
ENG-42
•
: The unit enters slide show mode.
• Before beginning the Slide Show, the picture interval must be
set. Press the ➛/❿ buttons to select a desired icon, then
press the ENTER button.
•
: The pictures change automatically with about a 6
second interval.
•
: The pictures change automatically with
about a 12 second interval.
•
: The pictures change automatically with
about a 18 second interval.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-43
Advanced
Functions
This unit can play the following video compression formats within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG-4 Simple Profile)
- DivX 5 contents (MPEG-4 simple profile plus additional features such as bi-directional frames. Qpel
and GMC are also supported.)
- XviD MPEG-4 compliant Contents.
Note
- If no buttons on the remote control are pressed
for 10 seconds, the menu will disappear.
ENTER RETURN
Press the INFO button to
display the menu.
Press the ➛/❿ buttons to
select the menu you want
to view, then press the
ENTER button.
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 44
A D VA N C E D F U N C T I O N S
Chapter 5
CHANGING SETUP
MENU
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
With the unit in Stop
mode, press the MENU
button on the remote
control.
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
❶ Language Setup : Setup of the Language.
❷ Audio Setup : Setup of the Audio Options.
❸ Display Setup :Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
❹ Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
❺ Divx(R) Registration : Please use the Registration code to register this player with the DivX(R)
Video On Demand format. To learn more go to www.divx.com/vod.
2
Press the $/❷ buttons to
access the different
features. Press the ❿ or
ENTER button to access
the sub features.
Changing
Setup Menu
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
ENG-44
Note
Depending on the disc, some Setup menu
selections may not work.
ENG-45
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 46
CHANGING SETUP
MENU
MENU
Setting Up the Language Features
Using the Disc Menu Language
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the MENU
button.
Using the Player Menu Language
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
2
Setup
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
3
Setup
Setup
4
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
4
Press the $/❷ buttons
to select Disc Menu, then
press the ❿ or ENTER
button.
LANGUAGE SETUP
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
❿
DivX(R) Registration
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
5
▼
5
❿
Parental Setup :
PLAYER MENU LANGUAGE
Player Menu
English
- The language is selected and the screen
returns to Language Setup menu.
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
DISC MENU LANGUAGE
English
Disc Menu
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
Français
Deutsch
Español
Thai
Others
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
Français
Deutsch
- To make the setup menu disappear, press the
MENU button.
Español
Thai
ENG-46
- Select “Others” if the language you want is
not listed.
ENG-47
Changing
Setup Menu
Player Menu
❿
Display Setup
▼
Press the $/❷ buttons to
select Player Menu, then
press the ❿ or ENTER
button.
Language Setup
❿
Audio Setup
3
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Language Setup
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 48
CHANGING SETUP
MENU
Using the Audio Language
Using the Subtitle Language
1
1
With the unit in Stop
mode, press the MENU
button.
With the unit in Stop
mode, press the MENU
button.
2
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Press the $/❷ buttons to
select Audio, then press
the ❿ or ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
3
3
4
MENU
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
4
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
Press the $/❷ buttons to
select Subtitle, then press
the ❿ or ENTER button.
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
▼
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
AUDIO LANGUAGE
Audio
English
Français
Deutsch
Español
Thai
Original
Others
- Select “Others” if the language you want is
not listed.
5
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
SUBTITLE LANGUAGE
Subtitle
Automatic
English
Français
Deutsch
Español
Thai
Others
- Select “Others” if the language you want is
not listed. Some discs may not contain the
language you select as your initial language;
in that case the disc will use its original
language setting.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to setup menu.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
- To make the setup menu disappear, press the
MENU button.
ENG-48
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
ENG-49
Changing
Setup Menu
▼
5
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 50
CHANGING SETUP
MENU
MENU
❶ Dolby/DTS Digital Out
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
Note
• There is no analog audio output when you play a DTS disc.
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs MPEG-2 Bitstrean via digital output. Select Bitstream when connecting to
an MPEG-2 Decoder.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
❸ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
3
Press the $/❷ buttons to
select Audio Setup, then
press the ❿ or ENTER
button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
▼
4
Press the $/❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
AUDIO SETUP
Dolby/DTS Digital Out
To make the setup menu disappear, press the
MENU button.
: PCM
MPEG-2 Digital Out
: PCM
Dynamic Compression
: On
PCM Down Sampling
: On
Note
• To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
ENG-50
ENG-51
Changing
Setup Menu
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 52
CHANGING SETUP
MENU
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
MENU
❶ TV Aspect
• If your TV system only has NTSC, input you
must choose “NTSC ”.
- PAL : In case of using PAL disc
• If your TV system only has NTSC-Video
input, you must choose “NTSC”.
• If your TV system only has PAL input, you
must choose “PAL ”.
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
DISPLAY SETUP
: Auto
Screen Messages
: On
Black Level
: On
TV System
: PAL
Video Output
: S-Video
❿
❿
❿
➏ Video Output
TV ASPECT
Select Video Output.
- S-Video : Select when you want to use
Video and S-Video Out.
4:3 Pan Scan
16:9 Wide
3
Press the $/❷ buttons to
select Display Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
❷ Still Mode
▼
Press the $/❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
: Wide
Still Mode
HDMI/DVI/Pscan
4:3 Lettre Box
4
TV Aspect
DISPLAY SETUP
TV Aspect
: Wide
Still Mode
: Auto
Screen Messages
: On
Black Level
: On
TV System
: PAL
Video Output
: S-Video
HDMI/DVI
❿
❿
❿
To make the setup menu disappear, press the
MENU button.
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
- Component (Iscan) : Select when you want
to use Video and Component 525i(Interlace)
Out.
- Component (Pscan) & HDMI : Select when
you want to use Component
525p(Progressive) Out or HDMI.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence in no disc mode.
(S-Video ➝ I-SCAN ➝ P-SCAN & HDMI)
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
❸ Screen Messages
Use to turn on-screen messages On or Off.
: Wide
Still Mode
: Auto
Screen Messages
: On
Black Level
: On
Video Output
: S-Video
❿
❿
❿
HDMI/DVI/Pscan
❹ Black Level
Adjusts the brightness of the screen.(On or
Off) It does not function in Progressive mode.
DISPLAY SETUP
S-Video
Component (Iscan)
Component (Pscan) & HDMI
❺ TV System
- NTSC : In case of using NTSC disc
• If your TV system only has PAL-Video input,
you must choose “PAL”. When you choose
“PAL”, Interlace output format is PAL 60 Hz
output.
ENG-52
ENG-53
Changing
Setup Menu
DISPLAY SETUP
TV Aspect
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 54
CHANGING SETUP
MENU
➏ HDMI/DVI/Pscan
This setting is used when the unit is
connected by HDMI or DVI with Display
devices (TV, projector, etc).
- Resolution
- 480p/576p : 720 x 480, 720 x 576
- 720p : 1280 x 720
- 768p : 1024 x 768
- 1080i : 1920 x 1080
- Format
You can use this function to set HDMI or
DVI output digital data RGB range.
- RGB-Normal : HDMI/DVI Limited range
RGB data output.
- RGB-Expand :HDMI/DVI Full range RGB
data output.
- YCbCr-(4:4:4) : HDMI Limited range
YCbCr-(4:4:4) output.
- YCbCr-(4:2:2) : HDMI Limited range
YCbCr-(4:2:2) output.
In case of HDMI output resolution 768p,
you cannot use YCbCr format.
Limited range Black/White and color level
are expressed within Limited data range.
ex) In case that bit depth is 8 bits
- Y : 16~235
- CbCr : 16~240
: 480p
Format
: RGB-Normal
Brightness
: Level 3
DVI Output
: Mode B
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
1
With the unit in Stop
mode, press the MENU
button.
2
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be blocked.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you set the HDMI output resolution 720p
or 1080i, HDMI output provides better
picture quality.
Bright
Level 1 Level 2 Level 3 Level 4 Level 5
Press the $/❷buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
3
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
Setup
4
Press the ❿ or ENTER
button to select Yes if you
want to use a password.
The Enter Password
screen appears.
PARENTAL SETUP
Use Password
: No
5
Enter your password. The
Re-enter Password
screen appears to confirm
the password. Enter your
password again.
The player is locked ( ).
CREATE PASSWORD
Enter Password
----
CREATE PASSWORD
Re-enter Password
----
ENG-54
ENG-55
To make the setup menu disappear, press the
MENU button.
Changing
Setup Menu
Dark
HDMI/DVI SETUP
Resolution
Setting Up the Parental Control
▼
Full range Black/White and color level are
expressed within full data range.
ex) In case that bit depth is 8 bits
- Y : 0~255
- CbCr : 0~255
- Brightness
You can use this function to set
Component (P-SCAN) & HDMI output
brightness.
- DVI Output
You can use this function to set HDMI to
DVI output format.
- This function corrects a TV screen when it
is not centered to secure a normal view.
- If HDMI to DVI Output is set incorrectly,
the screen can be biased.
MENU
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
CHANGING SETUP
Page 56
CHANGING SETUP
MENU
Setting Up the Rating Level
Changing the Password
1
1
With the unit in Stop
mode, press the MENU
button.
With the unit in Stop
mode, press the MENU
button.
2
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
3
Setup
4
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
The Enter Password
screen appears.
Enter your password.
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
Setup
❿
DivX(R) Registration
❿
▼
4
Enter Password
PARENTAL SETUP
Use Password
: Yes
Rating Level
:8
Change Password
PARENTAL SETUP
Use Password
: Yes
Rating Level
:8
To make the setup menu disappear, press the
MENU button.
❿
❿
Change Password
Changing
Setup Menu
Press the $/❷ button to
select Change
Password, then press the
❿ or ENTER button.
Enter your new password.
Re-enter the new
password again.
----
CHANGE PASSWORD
❿
❿
Enter New Password
----
▼
6
Press the $/❷ buttons to
select the Rating Level
you want, then press the
❿ or ENTER button.
e.g) Setting up in Level 6.
❿
Audio Setup
PASSWORD CHECK
Enter your password.
Press the $/❷ buttons to
select Rating Level, then
press the ❿ or ENTER
button.
Language Setup
3
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
5
MENU
RATING LEVEL
Level
Level
Level
Level
Level
Level
Level
Level
8 Adult
7
6
5
4
3
2
1 Kids Safe
To make the setup menu disappear, press the
MENU button.
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
CHANGE PASSWORD
Re-enter Password
----
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
ENG-56
ENG-57
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 58
REFERENCE
Chapter 6
REFERENCE
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
Troubleshooting
Before requesting service (troubleshooting), please check the following.
TV Codes
BRAND
ANAM
AIWA
BANG&OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
CODE
10, 11, 12, 13, 14, 15, 16, 17, 18
82
57
71
73
57
52
75
19, 20, 23, 24, 25, 26, 27, 28, 29,
30 , 31, 32, 33, 34
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
06, 19, 20, 21, 22, 78
06, 69
06, 57
40
57
06, 48, 62, 65
52, 77
83
68
66
BRAND
NORDMENDE
NOKIA
PANASONIC
PHILPS
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
REX
SABA
SALORA
SAMSUNG
SANYO
SCHNEIDER
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
YOKO
ZENITH
CODE
72, 73
74
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
45, 46
74
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
41, 42, 43, 44, 48
06
74
36, 37, 38, 39, 48
71
57
57
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
57
06
63
1.Turn on the TV.
2.Point the DVD’s remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
No operations can be
performed with the
remote control.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is
not being reproduced.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P4
P7
P18
P50~51
The
icon appears
on screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
P45~57
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
P52~53
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
P50~51
The screen is blocked
• Press the
button for more than 5 seconds under no disc inside. All settings
will revert to the factory settings.
P19
Forgot password
• Press the
button for more than 5 seconds under no disc inside.
All settings including the password will revert to the factory settings. Don't use
this unless absolutely necessary.
P55~57
If you experience other
problems.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest authorized
service center.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
e.g) For Samsung 2 TVs
While holding down the TV POWER button, enter 0 and then 1.
ENG-58
Page
ENG-59
P2
Reference
You can control the TV POWER, CH ( ,
), VOL (+, -) and TV/VIDEO
functions of another manufacturer's TV.
- The remote control may not be able to control every model TV of the brands listed.
- If you replace the remote control's batteries, set the brand code again.
Action
Problem
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 60
REFERENCE
REFERENCE
Specifications
Problem
No HDMI output.
Action
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/720p/768p/1080i DVD player.
Abnormal HDMI output
screen.
• If snow noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
HDMI output Jitter
• Check your TV system setup correctly.
• The screen Jitter phenomenon may occur when frame rate is converted from
50Hz to 60Hz for 720P/1080i HDMI (High Definition Multimedia Interface)
Output.
• Please refer to the user’s manual of your TV.
Page
P15~16
General
Power Requirements
AC 110-240V ~ 60/50 Hz
Power Consumption
12 W
Weight
2.3 Kg
Dimensions
Operating Temperature Range
Operating Humidity Range
P15~16
DVD
(DIGITAL VERSATILE DISC)
P52~54
Disc
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-Video
HDMI
2 Channel
Audio
Output
+41°F to +95°F
10 % to 75 %
CD : 12Cm
(COMPACT DISC)
VCD : 12Cm
Video
Output
430mm (W) X 250mm (D) X 49mm (H)
*Frequency Response
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
480p, 720p, 768p, 1080i
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
Reference
ENG-60
ENG-61
DVDHD850 XSS-00_Eng2
13/01/2005
8:24
Page 62
MEMO
MEMO
Reference
ENG-62
ENG-63
Download PDF