Samsung | CS29C510CL | Samsung CS29C510CL User Manual

COLOR TELEVISION
CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57
CS29Z58 / CS29A730 / CS29A760 /
CS29A750 / CS29B850 / CS29U50 /
CS29U57
Connection Panel (depending on the model)
actual configuration of your TV may be different,
➢ The
depending on your model.
Rear Panel
Owner’s Instructions
The RCA3 and RCA4 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video
game device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a
DVD with component output.
Front (or Side) Panel
Before operating, please read this manual thoroughly,
and retain it for future reference.
or
Register your product at
www.samsung.com/global/register
1 Video input
cable television
network
Control Panel (depending on the model)
actual configuration of your TV may be different,
➢ The
depending on your model.
Front (or Side) Panel
Connecting to the RCA Input
2 Audio input
VIDEO
OUT
Y
IN 2
PB
IN 1
PR
☛ Please be sure to match the color coded input terminals
and cable jacks.
or
cable television
network
☛ Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 2 (AUDIO-L/R) and 1 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
When both the front (or side) AV and rear connectors (AV
IN2) are connected to external equipment, the front (or
side) AV receives priority.
➢
Connecting to an Aerial or Cable Television Network
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Standby indicator
Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode.
 The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
AA68-04048J-Eng.indd 1
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
English - 1
AA68-04048J
AA68-04048J-00
2009-12-07 �� 6:29:47
Remote Control (depending on the model)
of remote control may be affected by bright
➢ Operation
artificial light near to the TV.
5 Numeric buttons
Used to select channels
directly.
6 INFO
Used to view the
channel information
and setting status you
selected.
7 SOURCE
Used to display all of
the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing Tools button.
1. Sleep Timer(Used to
select a preset time
interval for automatic
turn off.)
2. Picture Mode(Used
to select the picture
effect.)
3. Sound Mode(Used
to select sound
effect.)
4. Dual I-II(Used to
select sound mode.)
1 POWER
Used to switch the TV
on and off.
2 MENU
Used to display the
on-screen menu or
return to the previous
menu.
3 ▲/▼/◄/►
Used to control the
cursor in the menu.
P</>
Used to display the
next or previous stored
channel
=+/Used to increase or
decrease the volume.
5. Turbo Plus(Used to
select the Turbo Plus
option.)
6. Sound Adjust (Used
to display the sound
menu)
4 MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
= + or = - button.
9 ENTER
While using the
on-screen menus,
press the ENTER
button to activate (or
change) a particular
item.
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1
➢
2
Press the “P” button (On/Off) CH</> button on the
front (or side) of the television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 3.
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
0EXIT
Used to exit from any
display or return to
normal viewing.
! PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+” and
“-” ends of the batteries are inserted correctly or the batteries
are drained.
Do not mix battery types, i.e. alkaline and manganese.
➢
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
➢
4
Press the P</> button, or Numeric button on the
remote control.
Caution: One pole switch is totally not off (one line still
live) if power cord is not unplugged.
➢
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER button on the remote control while
viewing.
2
To switch the television back on, simply press it again.
☛ Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
English - 2
AA68-04048J-Eng.indd 2
2009-12-07 �� 6:29:47
Viewing the Menus
1
2
3
4
5
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
Press the ▲/▼/◄/► button to change the selected
items. Press the MENU button to return to the previous
menu.
Press the EXIT button to exit from the menu.
3
4
5
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Channel - Auto Store
Plug & Play
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P1
102MHz
7%
Stop
Enter
Skip
Plug & Play
Clock Set
1 2 : 0 0 am
Move
Adjust
Enter
Skip
stop the search before it has finished, press the
➢ To
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
“Channel - Sort”. To exit without
sorting, press the EXIT button.
Search
P1 102MHz
7%
Stop
Enter
Return
Enjoy your watching.
OK
Setup - Plug & Play (depending on the model)
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1
If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play is
displayed. To start Plug
& Play, press the ENTER
button. The Language
menu is displayed.
The Language menu
will automatically appear
after several seconds,
even if the ENTER
button is not pressed.
➢
2
Re-setting the Plug & Play
Method:
MENU ➜ ▲/▼ (Setup) ➜
ENTER ➜ ▲/▼ (Plug & Play)
➜ ENTER
Plug & Play
Setup
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen
: On
Move
Enter





Return
Start Plug & Play.
OK
Enter
Exit
Plug & Play
Input - Source List (depending on the model)
Language
English
Indonesia
Melayu
Move
Enter
Skip
Select the appropriated
Plug & Play
language by pressing the
Check antenna input.
▲ or ▼ button. Press the
OK
ENTER button. The Check
Enter
Skip
antenna input. is displayed.
If any language is not selected, the language menu
will disappear about 30 seconds later.
➢
continued...
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
Sort
TV
From
To
Store
:P1
: P-: ?
Adjust
◆ From: Channel number to
Move
Return
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Source List
TV
◆ Source List
TV
You can switch between
AV1
AV2
viewing signal from
Component
connected equipment,
such as a VCR, DVD, settop box, and the TV source
Move
Enter
Return
(broadcast or cable).
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the SOURCE button on the remote control.
➢
English - 3
AA68-04048J-Eng.indd 3
2009-12-07 �� 6:29:48
Channel - Manual Store
Channel - Add/Delete
Manual Store
TV You can store channels,
Programme
: P 3
including those received via
Color System
: AUTO

cable networks. When storing
Sound System : BG

Search
: 46MHz
channels manually, you can
Store
: ?
choose:
-
Whether or not to store each
Adjust
Move
Return
of the channels found.
-
The programme number of
each stored channel which you wish to identify.
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to
skip are not displayed. All of
the channels that you did not
specifically choose to skip are
displayed during scanning.
◆ Programme (Programme number to be assigned to a
channel)
◆ Color System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
You can also select the channel number directly by
pressing the numeric buttons (0-9).
◆ Store (When you store the channel and associated
programme number)
If there is no sound or abnormal sound, re-select the
sound standard required.
➢
➢
Setup - Time
Add/Delete
TV
 More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
 More
Move
Enter
Return
Method:
ENTER : Select Added or Deleted.
Time
TV
 Clock
Clock
12:00 am
You can set the television
On Timer - - : - - a m Off
clock so that the current time
Off Timer- - : - - a m Off
is displayed when pressing
the INFO button on the
remote control. You must
Move
Enter
Return
also set the time if you wish
to use the automatic on or
off timers.
W
hen pressing the " P " button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
➢
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
Fine Tune
◄/►: You can obtain a sharp
P 1
0
and clear picture and good
sound quality.
Reset
▲/▼ ➜ ENTER : You can reset
Move
Save
Adjust
Return
the setting.
ENTER : You can memorise
adjusted picture or sound.
☛ You must set the clock first.
Power Off
☛ Auto
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating, which may
occur if a TV is on for too long.
English - 4
AA68-04048J-Eng.indd 4
2009-12-07 �� 6:29:48
Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
You can select these options simply by pressing the TOOLS
button on the remote control to enter Sleep Timer.
If the sleep timer is not yet set, Off is displayed. If it is already
set, the remaining time before which the television switches to
standby mode is displayed.
Setup - Language / Blue Screen (depending on the model)
◆ Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select
the language which will be
used for displaying menus
and indications.
Setup
TV
Plug & Play
Language
: English
Time
Child Lock
Blue Screen : On
Move
Enter





Exit
◆ Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
Setup - Child Lock
Picture - Mode
Child Lock
TV
This feature allows you to
Child Lock
: On

prevent unauthorized users,
Programme
:P1
such as children, from watching
Lock
: ?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
Move
Enter
Return
using front (or side) panel
buttons. Only remote control can
release the Child Lock setting, so keep the remote control
away from children.
Mode
◆ Mode: Dynamic/ Standard/ TV
Mode
: Dynamic

Movie/Custom
Contrast
:
100
Brightness
:
50
You can select the type
Sharpness
:
75
Color
:
50
of picture which best
Tint
: G 50
R 50
corresponds to your viewing
Color Tone
: Cool1

Reset

requirements.
Move
Adjust
Return
Y
ou
can
select
these
➢ options simply by pressing the TOOLS button on the
remote control and enter the Picture Mode.
◆
◆
◆
Child Lock: On/Off
If you want to unlock a channel, set to Off.
Programme: Channel number to be locked.
Lock: When press the ENTER button, the Locked is
displayed.
any channel is locked, you can not access to the
➢ IfChannel
and Child Lock menu by using the control
buttons on the TV panel (the Not available is displayed
in the Child Lock menu). You can access by using the
remote control only.
Picture - Digital NR / DNIe
◆ Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear
on the screen.
(depending on the model)
Picture
TV
Mode
: Dynamic
Size
: Normal
Digital NR
: Off
DNIe : Off
Move
Enter




Exit
◆ DNIe
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm
gives brighter, clearer, much detailed image to you. DNIe
technology will fit every signals into your eyes.
Picture - Size (depending on the model)
◆ Contrast/Brightness/Sharpness/Color/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.
◆ Color Tone: Cool2/Cool1/Normal/Warm1/ Warm2
Picture
TV
Mode
: Dynamic
Size
: Normal
Digital NR
: Off
DNIe : Off
Move
Adjust




Return
◆ Size: Normal/Zoom
You can select the picture size which best corresponds
to your viewing requirements. It is variable depending on
the model.
Method:
◄/►: Select Normal or Zoom.
◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
English - 5
AA68-04048J-Eng.indd 5
2009-12-07 �� 6:29:48
Sound - (depending on the model)
Mode / Adjust / Auto Volume / Turbo Plus
 Mode : Standard / Music /
Sound
TV
Mode
: Standard ►
Movie / Speech / Custom
Adjust
►
You can select the type of
Auto Volume
: Off ►
Turbo Plus
: Off ►
special sound effect to be
used when watching a given
broadcast.
You can select these
Move
Enter
Exit
options by pressing
TOOLS button to enter Sound Mode.
Selecting the Sound Mode
Pressing TOOLS button to enter Dual l-ll/controls the
processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either
“Dual-I ” or “Stereo”, depending on the current transmission.
◆ NICAM Stereo
➢
 Adjust : Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal use)
➢
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
You can select the options by pressing TOOLS button
to enter Turbo Plus.
TOOLS (depending on the model)
(depending on the model)
Regular +
NICAM Mono
Mono
NICAM
↔
Mono
(Normal)
NICAM Stereo
Stereo
NICAM
↔
Mono
(Normal)
NICAM Dual-I/II
Use to quickly select frequently
used functions.
➢
Tools
Sleep Timer
Picture Mode
Sound Mode
Dual I-II
Turbo Plus
Sound Adjust
◄
◄
◄
◄
◄
Off
Dynamic
Standard
Mono
Off
You can press TOOLS
button and check the
Sleep Timer/Picture
Move
Adjust
Mode/Sound Mode /Dual
I-II/Turbo Plus/Sound Adjust by </ > button.
The detail information please refer to page2
►
►
►
►
►
Exit
Dual-I
Dual-II
Mono
NICAM ↔ NICAM ↔ (Normal)
◆ A2 Stereo
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal)
Bilingual or Dual-I/II
Stereo
➢
➢
Dual-I
Stereo
↔
↔
Dual-II
Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
English - 6
AA68-04048J-Eng.indd 6
2009-12-07 �� 6:29:49
Teletext Feature (depending on the model)
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
☛ For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
(index)
1
Used to display the index (contents) page at any time while
you are viewing teletext.
2 Colored buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company,
the different topics covered on a teletext page are colorcoded and can be selected by pressing the colored buttons.
Press one of them corresponding to the required. The page is
displayed with other colored information that can be selected
in the same way. To display the previous or next page, press
the corresponding colored button.
(reveal)
3
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
(teletext on/mix)
4
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it again to overlap the
teletext with the current broadcasting screen.
(hold)
5
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
(store)
6
Used to store the teletext pages.
(page up)
7
Used to display the next teletext page.
(page down)
8
Used to display the previous teletext page.
(cancel)
9
Used to display the broadcast when searching for a page.
(sub-page)
0
Used to display the available sub-page.
(mode)
!
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page into
list using the
(store) button.
(size)
@
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
Troubleshooting
Before contacting the Samsung after-sales service, perform
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the “P” button (On/
Off) and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is
affecting the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of
your aerial. This interference often occurs due to the
use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
A still image may cause color distortion, but with
normal sound(white or highlight image).
◆ Switch to other channels with moving image, and
check if the color turns normal after 5 minutes.
◆ Turn off the TV, and turn it on after 30 minutes to
check the color.
English - 7
AA68-04048J-Eng.indd 7
2009-12-07 �� 6:29:50
OSD Map
Input
✽ : It is variable depending on the model.
-Source List ✽
- TV / AV1 / AV2 / Component
Picture
-Mode
- Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
Color Tone - Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset
-Size
- Normal / Zoom
-Digital NR
- Off / On
-DNIe ✽
- Off / On
Sound
-Mode
- Standard / Music / Movie / Speech / Custom
-Adjust ✽
- Bass / Treble / Balance
-Auto Volume ✽
- Off / On
-Turbo Plus ✽
- Off / On
Channel
-Auto Store
-Manual Store
-Add/Delete
-Fine Tune
-Sort
Setup
-Plug & Play ✽
-Language ✽
-Time
-Child Lock
-Blue Screen
- Search
- Programme
- Color System ✽ - AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58
- Sound System ✽ - BG / DK / I / M
- Search
- Store
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect
ratio of the screen width to height) are primarily
designed to view standard format full-motion video.
The images displayed on them should primarily be in
the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than
15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio
of the screen width to height) are primarily designed
to view wide screen format full-motion video. The
images displayed on them should primarily be in the
wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly
moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded
standard format television video and programming,
should be limited to no more than 15% of the total
television viewing per week.
Additionally, viewing other stationary images and text
such as stock market reports, video game displays,
station logos, web sites or computer graphics and
patterns, should be limited as described above for
all televisions. Displaying any stationary images
that exceed the above guidelines can cause uneven
aging of picture tubes (CRTs) that leave subtle, but
permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and
images, and primarily display full screen moving
images, not stationary patterns or dark bars.
On television models that offer picture sizing features,
use these controls to view the different formats as a
full screen picture.
- Clock
- On Timer
- Off Timer
- Child Lock
- Programme
- Lock
- Off / On
Be careful in the selection and duration of television
formats used for viewing. Uneven CRT aging as a
result of format selection and use, as well as other
burned-in images, is not covered by your Samsung
limited warranty.
English - 8
AA68-04048J-Eng.indd 8
2009-12-07 �� 6:29:50
Download PDF