Samsung | MM-J430D | Samsung 120 W 2.0Ch Mini Micro Component J430D User Manual

MM-J430D
DVD MICRO COMPONENT
SYSTEM
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
MM-J430D-SG-ENG-0708.indd 1
2016/2/4 15:19:49
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock
or personal injury.
CAUTION: TO PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device
and shall stay readily operable at any time.
• This apparatus shall always be connected
to an AC outlet with a protective grounding
connection.
• To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily
operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
This symbol indicates important
instructions accompanying the
product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
WARNING
• TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
| 2 English
MM-J430D-SG-ENG-0708.indd 2
2016/2/4 15:19:50
Precautions
• Ensure that the AC power in your house
matches the requirements listed on the
identification sticker located on the back of your
product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc tray
is empty.
• To turn off the product completely, disconnect
the AC plug from the wall outlet. Disconnect the
AC plug from the wall outlet if you will be leaving
the device unused for a long period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
• Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
• Protect the product from moisture, and excess
heat or equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC supply
if the product malfunctions.
• Your product is not intended for industrial use. It
is for personal use only.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
• An improper ground may cause electric shock
or equipment damage. (Class l Equipment only.)
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on a disc may
reduce sound and picture quality or cause
skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a disc, clean
it with a mild detergent diluted in
water and wipe with a soft cloth.
-- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
-- Do not keep in direct sunlight.
-- Keep in a cool, ventilated area.
-- Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm
air comes into contact with cold
parts inside the product. When
condensation forms inside the
product, it may not operate correctly. If this
occurs, remove any discs in the product, and
then let the product stand for 1 or 2 hours with
the power on.
English
MM-J430D-SG-ENG-0708.indd 3
3|
2016/2/4 15:19:50
Safety Information
License
Copyright
© 2015 Samsung Electronics Co., Ltd. All rights
reserved.
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
Copy Protection
To play purchased DivX movies, first register your
• Many DVD discs are encoded with copy
device at vod.divx.com. Find your registration
protection. Because of this, you should only
code in the DivX VOD section of your device setup
connect your product directly to your TV, not
menu.
to a VCR. Connecting to a VCR results in a
DivX Certified® to play DivX® video,including
distorted picture from copy-protected DVD
premium content.
discs.
DivX®, DivX Certified® and associated logos
• This product incorporates copyright protection
are trademarks of DivX, LLC and are used under
technology that is protected by U.S. patents
License.
and other intellectual property rights. Use of
Covered by one or more of the following U.S.
this copyright protection technology must be
patents: 7,295,673; 7,460,668; 7,515,710;
authorized by Macrovision, and is intended
8,649,669;8,656,183; 8,731,369; RE45,052.
for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
Manufactured under license from Dolby
prohibited.
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
• HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries.
• This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
| 4 English
MM-J430D-SG-ENG-0708.indd 4
2016/2/4 15:19:51
Contents
SAFETY INFORMATION
2
3
3
4
4
4
Safety Warnings
Precautions
Disc Storage & Management
License
Copyright
Copy Protection
GETTING STARTED
6
7
8
9
9
10
Disc and Format Compatibility
Notes on the USB connection
Front/Top Panel
Rear Panel
Accessories
Remote control
CONNECTIONS
11
12
Connecting the Speakers
Connecting the Video Out to your TV
SETTINGS
14
14
14
14
14
15
15
15
15
15
15
15
16
16
16
16
16
16
16
The Initial Settings Procedure
Accessing the Settings Screen
Display
TV Aspect
BD Wise
Resolution
Video Out Signal
HDMI Format
Audio
DRC (Dynamic Range Compression)
AUDIO SYNC
Speaker Selection
Audio Return Ch.
System
Initial Settings
Language
Security
Parental Rating
Change Password
16
16
Support
Product Information
BASIC FUNCTIONS
17
17
17
17
19
20
21
21
22
22
23
23
24
25
27
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Special Sound Effects
TV SoundConnect
Listening to the Radio
Display Function
Setting the Clock
Timer Function
Selecting MY KARAOKE Mode
USB Function
Recording Function
Bluetooth
Software update
OTHER INFORMATION
28
29
Troubleshooting
Specifications
`` Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
`` An administration fee may be charged if either
a. an engineer is called out at your request and
there is no defect in the product (i.e. where you
have failed to read this user manual)
b. you bring the unit to a repair centre and there
is no defect in the product (i.e. where you
have failed to read this user manual).
`` The amount of such administration charge will
be advised to you before any work or home
visit is carried out.
English
MM-J430D-SG-ENG-0708.indd 5
5|
2016/2/4 15:19:51
Getting Started
Disc and Format Compatibility
Disc types and contents your product
can play
Media
Term
DVD
VIDEO
MUSIC
PHOTO
CD
DivX
MP3
JPEG
Disc Type
DVD-Video or
DVD±R/±RW discs
Data CD (CD DA, CD-R/RW)
DVD±R/±RW, CD-R/-RW
Supported Formats
Video File Support
Format
Supported Versions
WMV
V1/V2/V3/V7
AVI
Music File Support
File
Extension
CD-R/-RW
CD-R/-RW
*.mp3
Disc types your product cannot play
• LD, CD-G/-I/-ROM, DVD-ROM/-RAM
| NOTES |
\\ DVD discs purchased abroad may not play on
this product.
\\ This product may not respond to all operating
commands because some DVD, and CD discs
allow specific or limited operation and provide
only certain features during playback. Please
note that this is not a defect in the product.
\\ Samsung cannot guarantee that this product
will play every disc bearing the DVD or CD logo
because disc formats evolve, and problems
and errors may occur during the creation of
DVD, and CD software and/or the manufacture
of discs.
\\ Please contact the SAMSUNG Customer Care
Centre, if you have questions or encounter
difficulty when playing DVD, or CD discs in
this product. Also, refer to rest of this user
manual for additional information on playback
restrictions.
\\ Some commercial discs and DVD discs
purchased outside your region may not play on
this product.
DivX3.11,4,5,6
*.wma
Audio
Codec
Sampling
Rate
Bit Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
AC3
/
44.1/48khz 128~384kbps
• Aspect Ratio : This product supports up to
720x576 pixels. TV screen resolutions higher
than 800 will not be supported.
• When you play a disc whose sampling
frequency is higher than 48khz or 320kbps, you
may experience shaking on the screen during
playback.
• Sections with a high frame rate might not be
played while playing a DivX file.
• Since this product only provides encoding
formats authorized by DivX Networks, Inc., a
DivX file created by the user might not play.
Logos of Discs the product can play
DVD-VIDEO
AUDIO-CD
DivX
| 6 English
MM-J430D-SG-ENG-0708.indd 6
2016/2/4 15:19:52
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc will
not play. The Region Number for this product is
displayed on the rear panel of the product.
Disc Type
Region
Code
1
2
DVDVIDEO
3
4
5
6
Area
The U.S., U.S. territories
and Canada
Europe, Japan, the
Middle East, Egypt, Africa,
Greenland
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific
Islands, Caribbean
Russia, Eastern Europe,
India, North Korea,
Mongolia
China
| NOTE |
\\ If the Region number of a DVDs does not
correspond to the Region number of this
product, the product cannot play the disc.
Notes on the USB connection
• Supported devices: USB storage media, MP3
player, digital camera
• If a folder or file name is longer than 10
characters, it may not properly display or
operate.
• A subtitle file bigger than 300KB may not be
properly displayed.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones
may not be supported.
• FAT16 and FAT32 file systems are supported.
• Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
• Inserting more than one memory device to a
multi-card reader may not operate properly.
• PTP protocol for digital camera is not supported.
• Do not disconnect USB device during a "READ"
process.
• Bigger the image resolution, the longer the delay
to displaying.DRM applied MP3/WMA or video
files downloaded from a commercial site are not
played back.
• USB HDD's should be connected to a separate
power source. Otherwise, the HDD's will not
work.
• The maximum current supported by the USB
port for an external device is 500 mA (at 5V DC).
• Supported file formats
Format
File name
Still
Picture
Music
Movie
JPG
MP3
WMA
WMV
DivX
File
extension
JPG .JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11,4,5,6
Pixel
640x480
–
–
720x576
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
| NOTES |
\\ Playing back a JPEG file whose image
resolution is higher than that of DVD may result
in degraded image quality when displayed.
\\ A maximum of 999 tracks can be played per
CD.
\\ A maximum of 250 folders can be played per
CD.
English
MM-J430D-SG-ENG-0708.indd 7
7|
2016/2/4 15:19:53
Getting Started
Front/Top Panel
1
2
3
4 5
6
7
!
5V 500mA AUX IN
9 8
0
1
2
3
4
5
6
7
POWER button
Press this button to switch your product
on or off.
SOURCE button
AUX IN JACK
8
STOP button
PLAY/PAUSE button
OPEN/CLOSE button
VOLUME CONTROL - button
VOLUME CONTROL + button
9
0
!
1. Use the Audio Cable (not supplied) to connect
AUX IN on the player to Audio Out on the
external analog component.
2. Press
to switch the input mode to AUX.
~~ If no button actions for more than 8 hours in
AUX mode, the power will automatically turn
off.
USB jack
DISC tray
Display Panel
USING THE TOUCH BUTTON
¡¡ Tap on touch screen with your fingertip.
¡¡ To avoid damage to the touch screen, do not use any object other than your fingers to operate it.
¡¡ Do not tap on the touch screen if your fingers are not clean.
¡¡ Do not tap on the touch screen with gloves on.
¡¡ The touch screen may not function if you use your fingernail or other instrument such as a ballpoint pen.
| 8 English
MM-J430D-SG-ENG-0708.indd 8
2016/2/4 15:19:54
Rear Panel
7
6
5
4
3
2
1
1. DC 24V (Power Supply In)
• Connect the DC power adaptor to the power
supply jack, and then connect the AC power
adaptor plug to a wall outlet.
2. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.To achieve the correct
sound quality, insert the speaker connector
cables identified below into the correct speaker
terminals on the back of the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. ONLY FOR SERVICE
• This jackis for service only. Please do not
use.
4. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the
FM Antenna jack.
2. Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
3. If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
5. HDMI OUT Jack
Outputs digital video and audio signals simultaneously using an HDMI cable.
6. VIDEO OUT Jack
Connect your TV's Video Input jack (VIDEO IN) to
the VIDEO OUT jack.
7. COMPONENT VIDEO OUTPUT Jacks
Connect a TV with Component video inputs to these jacks.
Accessories
Check for the supplied accessories below.
Video Cable
FM Antenna
User's Manual
Remote Control/
Batteries
DC Adapter
Power Cord
English
MM-J430D-SG-ENG-0708.indd 9
9|
2016/2/4 15:19:55
Getting Started
Remote control
Tour of the Remote Control
POWER
SOURCE
SOUND
EQ
SOUND
DISC MENU
DVD
DISC MENU
TITLE MENU
SLEEP
1
2
3
4
5
6
7
8
9
VOL
VOL
0
VOLUME TUNING
VOLUME +
TUNING ,Skip­
STOP
PLAY
REPEAT
HOME
TOOLS
SOURCE
MUTE (Turn off the sound temporarily. Press
again to turn the sound back on.)
DVD
EQ
SLEEP (Press and hold sleep button,set a sleep
time to shut off the product.)
TITLE MENU
Number(0~9)
Search
PAUSE
REPEAT
HOME
USB REC
USB REC
TOOLS
INFO
INFO
CURSOR, ENTER
RETURN
DISPLAY, A
MO/ST, B
CD REC SPEED
MY KARAOKE
EXIT
RETURN
DISPLAY
A
B
CD REC
MY KARAOKE
SPEED
EXIT
MO/ST
C
D
TIMER
ON/OFF CLOCK
D
C
TIMER CLOCK
TIMER ON/OFF
Installing batteries in the Remote Control
| NOTES |
\\ Place batteries in the remote control so that the polarities (+,- )
match the diagram in the battery compartment.
\\ Do not dispose of batteries in a fire.
\\ Do not short circuit, disassemble, or overheat the batteries.
\\ You could cause an explosion if you replace the battery with the
wrong type of battery. Replace the battery only with the same or
equivalent type.
\\ The remote control can be used up to approximately 23 feet
(7 meters) in a straight line from the unit.
* Battery size: AAA
| 10 English
MM-J430D-SG-ENG-0708.indd 10
2016/2/4 15:19:56
Connections
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Speaker (L)
Speaker (R)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away
from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Speakers ei
Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the speakers so that their tweeters will be at the same
height as your ear.
| CAUTION |
\\ Do not let children play with or near the speakers. They could get hurt if the speaker falls.
\\ When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
| NOTE |
\\ If you place a speaker near your TV set, screen colour may be distorted because of the magnetic
field generated by the speaker. If this occurs, place the speaker away from your TV set.
English
MM-J430D-SG-ENG-0708.indd 11
11 |
2016/2/4 15:19:56
Connections
Connecting the Video Out to your TV
Choose one method for connecting to a TV.
METHOD 1
( not supplied)
METHOD 2
(supplied)
METHOD 3
(not supplied)
TV
VIDEO INPUT
COMPONENT IN
METHOD 1 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component
Video Input Jacks on your TV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
METHOD 3 : HDMI
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
| NOTES |
\\ Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 15 for the resolution setting.
\\ This product operates in Interlace scan mode 480i(576i) for component/composite output.
\\ After making the video connection, set the Video input source on your TV to match the corresponding Video output
mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for more
information on how to select the TV's Video Input source.
| 12 English
MM-J430D-SG-ENG-0708.indd 12
2016/2/4 15:19:57
!! CAUTION
`` Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
•HDMI (High Definition Multimedia Interface)
•HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
•HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
•What is the HDCP?
•HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+(HDMI-CEC).
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 12)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
| NOTES |
\\ The Anynet+ function supports some buttons of the remote control.
\\ This function is not available if an HDMI cable does not support CEC.
\\ Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
\\ Please check the Anynet+(HDMI-CEC) logo (If your TV has an Anynet+(HDMI-CEC) logo, then it supports Anynet+
function.)
Using ARC(Audio Return Channel)
ARC is feature that transfer audio from the TV back to the product and listen to your TV's audio through the
product instead of the TV's speakers without having to connect a second cable between the TV and other
audio system.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 12)
2. Press the SOURCE button to select ARC input.
• You can select ARC by pressing the SOURCE button on the remote control and the product.
• When you select the TV speaker on TV and then the main set will display"S MUTE".
• On S MUTE MODE,EQ/SOUND/VOL/MUTE button doesn't work.
English
MM-J430D-SG-ENG-0708.indd 13
13 |
2016/2/4 15:19:57
SOURCE
SOUND
EQ
Settings
The Initial Settings Procedure
Press the POWER button when it is plugged in
TV for the first time. Initial Settings screen will be
displayed.
DVD
SLEEP
DISC MENU
TITLE MENU
1
2
3
4
5
6
7
8
9
VOL
VOL
Buttons on the Remote Control Used
for the Settings Menu
0
TUNING
1
▲▼ (select the desired language)  v
 ▲▼ (select the desired TV Aspect)  v.
REPEAT
HOME
TOOLS
USB REC
INFO
3
Initial settings > On-Screen Language
Select a language for the on-screen displays
2
EXIT
RETURN
DISPLAY
4
MO/ST
1
A
B
C
D
HOME Button
: Press
to move
to the Home
TIMER
REC MY KARAOKE
screen. CDSPEED
ON/OFF CLOCK
2
RETURN Button : Return to the previous menu.
3
v (Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the v button to activate the currently
selected item or confirm a setting.
the content of the disc.
4
EXIT Button : Press to exit the current menu.
RED(A) button.
Display
English
한국어
Nederlands
Français
Deutsch
Italiano
>Move
" Select
| NOTES |
\\ The initial screen may appear different, depending on
\\ If you move to the previous screen, press and hold the
\\ Once you select a menu language, you can change it
by pressing the 5 button on the top panel for more
than 5 seconds with no disc.
\\ If you want to display the Initial Setting screen again
and make changes, select the Reset option.
Accessing the Settings Screen
1. Press the POWER button.
Settings
TV Aspect
• 4:3 Pan-Scan: Select when you want to see the 16:9
video supplied by the DVD without the black bars on
top and bottom, even though you have a TV with a 4:3
ratio screen.
• 4:3 Letterbox: Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
• 16:9 Wide: You can view the full 16:9 picture on your
widescreen TV.
| NOTES |
\\ If a DVD is in the 4:3 ratio, you cannot view it in the
wide screen.
\\ Since DVD discs are recorded in various image formats,
Source
DVD/CD
2. Press the ◄► buttons to select Settings,
then press the v button. The Settings screen
appears.
3. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration below.
| 14 English
MM-J430D-SG-ENG-0708.indd 14
they will look different depending on the software, the
type of TV, and the TV aspect ratio setting.
\\ When using HDMI, the screen is automatically
converted to the 16:9 Wide mode and TV Aspect is
deactivated.
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products
with BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
2016/2/4 15:19:58
• On : The original resolution of the DVD disc will be output to the TV direct.
• Off : The output resolution will be fixed according to the Resolution previously set, regardless of the resolution of the disc.
| NOTES |
\\ This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play and
the product or your BD Wise-compliant Samsung TV.
\\ If you want to change the resolution in BD Wise mode,
you must set BD mode to Off in advance.
\\ BD Wise will be disabled if the product is connected to
a device that does not support BD Wise.
Resolution
Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
• 480p(576p) : Outputs 480 lines of progressive
video.
• 720p : Outputs 720 lines of progressive video.
• 1080i : Outputs 1080 lines of interlaced video.
• 1080p: Outputs 1080 lines of progressive video.
• BD Wise : Automatically sets the optimal resolution
when connected via HDMI to a TV with the BD
Wise feature. (The BD Wise menu item appears
only if BD Wise is set to On.)
| NOTES |
\\ If Component or Composite is connected, the resolution
supports only 480i(576i).
\\ 1080P may not appear depending on TV.
Video Out Signal
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
• Monitor : Select if connected to a Monitor via
HDMI.
• TV : Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the
loudest and quietest sounds. You can use this
function to enjoy Dolby Digital sound when
watching movies at low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital
TV. If this occurs, adjust the audio delay time to
match the video.
• You can set the audio delay time between 0 mS and
300 mS. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
• Audio System : V
ideo is transmitted over the HDMI
connection cable only, and audio is
output through the product speakers
only.
• TV Speaker : B
oth video and audio signals are
transmitted over the HDMI connection
cable, and audio is output through your TV
speakers only.
| NOTES |
Different countries apply different TV standard.You
can select from NTSC or PAL.
\\ The default setting of this function is Audio System .
\\ HDMI Audio is automatically down-mixed to 2ch for TV
• NTSC : You can set to the NTSC video format
\\ When TV Selection is set to TV Speaker, EQ/POWER
• PAL : You can set to the PAL video format
| NOTE |
\\ Depending on the type(NTSC or PAL) of main unit you
speakers.
BASS/Recording/MY KARAOKE/VOL/MUTE doesn't
work.
\\ With Speaker Selection set to 'TV Speaker', the volume
can be adjusted only using the TV remote control.
have, the TV screen displayed may be different.
English
MM-J430D-SG-ENG-0708.indd 15
15 |
2016/2/4 15:19:59
Settings
Audio Return Ch.
You can enjoy TV sound from the speakers by
using just one HDMI cable.
•Off : T urn the Audio Return Channel function off.
•Auto: Listen to TV sound from the speakers if
your TV is compatible with the Audio Return
Channel function.
| NOTES |
\\ When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
\\ Using an ARC (Audio Return Channel)-uncertified
HDMI cable may cause a problem in compatibility.
\\ ARC function is only available if an ARC-compliant TV
is connected.
\\ If no ARC signal for more than 25 minutes, the power
will automatically turn off.
System
Initial Settings
By using the Initial Settings, you can set the
language and TV aspect .
| NOTE |
\\ If an HDMI cable is connected to the product, the TV
aspect does not appear and it is set to 16:9 Wide
automatically.
DivX(R) VOD
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
| NOTE|
\\ Even after you reset the system, the settings of DivX
Registration will not be reset.
Language
To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your country.
For more information, refer to www.samsung.com or
call to Samsung customer service center.
| NOTES |
\\ You cannot select OTHERS in the OSD Language
menu.
\\ The selected language will only appear if it is
supported on the disc.
Security
The Parental Lock function works in conjunction
with DVDs that have been assigned a rating,
which helps you control the types of DVDs that
your family watches. There are up to 8 rating levels
on a disc.
Parental Rating
Select the rating level you want to set. Enter the
password and then press the v button.
• The password is set to "0000" by default.
Change Password
Select Change and enter the 4-digit password to
set the parental lock using the number buttons on
the remote control.
If you forgot your password
In No Disc mode, Press and hold the 5 button on the
remote control for 5 seconds or more. All settings will
revert to the factory settings.
Support
Product Information
Provide the product information such as Model
code, Software Version, etc.
You can select the language you prefer for onscreen menu, disc menu, etc.
| 16 English
MM-J430D-SG-ENG-0708.indd 16
2016/2/4 15:19:59
Basic Functions
Disc Playback
JPEG File Playback
OPEN/CLOSE  Place a disc gently into the tray
with the disc's label facing up  OPEN/CLOSE.
Insert a JPEG disc  _+ (select Photos)  v 
$% (select the desired folder)  v  $% (select the
desired photo)  v
| NOTES |
\\ When you stop disc play, the product remembers
where you stopped, so when you press 6 button
again, it will pick up where you left off. (Resume
function works only with DVDs.)
Press the 5 button twice during playback to disable
the Resume function.
\\ If no buttons are pressed on the product or remote control
for more than 3 minutes when the product is in Pause mode,
it will be changed to stop mode.
\\ Pirated discs will not play in this product because they violate
the CSS (a copy protection system) recommendations.
\\ will appear when an invalid button is pressed.
\\ If no button input is made for more than 5 minutes in Stop or
Play (music) mode, the screen saver will get activated.
\\ If the product is left in the screen saver mode for more
than 20 minutes, the power will automatically turn off.
(Except during play a music)
\\ DTS Audio is not supported.
Audio CD(CD-DA)/MP3/WMA
Playback
1. Insert an Audio CD(CD-DA) or an MP3 Disc.
• For an Audio CD, the first track will be played
automatically.
-- Press the [] buttons to move to the
previous/next track. You can also use the
Number(0~9) button to select the desired track.
• For the MP3/WMA disc, press the _+ buttons to
select Music, then press the v button.
-- Press the $%_+ buttons to select a desired
file and press the v button.
-- Press the () buttons to move to the
previous/next pages.
2. Press the 5 button to stop playback.
| NOTES |
\\ Some MP3/WMA-CDs may not play, depending on
the recording mode.
\\ Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
\\ WMA-DRM files cannot be played.
\\ If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode or
no Disc mode, the power will automatically turn off.
• The selected file will play and slide show will start.
To stop slide show, press the 7 button.
• You can view the previous/next file by pressing the
_,+,[,] buttons during the slideshow mode.
Rotate Function
Press the GREEN(B) or YELLOW(C) button
during the PAUSE mode.
• GREEN(B) Button: Rotate 90° Counterclock wise.
• YELLOW(C) Button: Rotate 90° Clockwise.
| NOTE |
\\ The maximum resolutions supported by this product
are 5120 x 3480 (or 19.0 MPixel) for standard JPEG
files and 2048 x 1536 (or 3.0 MPixel) for progressive
image files.
Using the Playback Function
Forward/Reverse Search
Press the () buttons for Search Function.
| NOTE |
\\ No sound is heard during the fast playback (except
CD-DA x 1 and CD-DA x 2).
Skipping Scenes/Songs
Press the [] buttons.
• Each time the button is pressed during playback, the
previous or next chapter, track or directory (file) will be
played.
• You cannot skip chapters consecutively.
Skipping Folder
When the Music/Video/Photo files on play and
stop mode, press and hold the [] buttons on
the remote control.
• It will skip to the previous/next folder, and "File
Searching..." is displayed.
| NOTES |
\\ In Forward/Reverse/Pause/Step/Slow mode, this
function does not work.
\\ Depending on the content of the file or the folder, the
skipping time may be different.
English
MM-J430D-SG-ENG-0708.indd 17
17 |
2016/2/4 15:20:00
Basic Functions
Slow Motion Play
Press the 7 button and then press the )
button for Slow Motion play.
| NOTES |
\\ No sound is heard during slow playback.
\\ Reverse slow playback does not work.
\\ This function is available for the DivX/DVD.
Step Motion Play
Press the 7 button repeatedly.
• The picture moves forward one frame each time the
button is pressed during playback.
| NOTES |
\\ No sound is heard during step motion playback.
\\ This function is available for the DivX/DVD.
5 Minute Skip Function
During playback, press the _,+ button.
• Playback skips 5 minutes forward whenever you press
the + button.
• Playback skips 5 minutes backward whenever you
press the _ button.
| NOTE |
\\ This function is available only for the DivX that contains
time information.
Using the Disc/Title Menu
During playback, press and hold
DISC MENU or TITLE MENU ; $%_+ ; v
• Disc Menu : You can view the menus for the audio
language, subtitle language, profile, etc.
• Title Menu : For DVDs containing multiple titles, you
can view the title of each movie.
| NOTE |
\\ Depending on the disc, menu setup items may vary
and this menu may not be available.
Repeat Playback
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
1. During DVD/DivX playback, press the REPEAT
button on the remote control.
2. Press the $% buttons to select a desired
3. Press the ▲▼ buttons to select OFF to return
to normal play, then press the v button.
• DVD : Off ➞ Title ➞ Chapter ➞ A-B
• DivX: Off ➞ Title ➞ Folder ➞ All
CD/MP3 Repeat
During the CD/ MP3 playback, press the REPEAT button
repeatedly to select the repeat mode you want.
• CD :
(Off) ;
(Track) ;
(Random) ;
(Section A-B)
• MP3 :
(Off) ;
(Track) ;
(All);
(Random)
(All) ;
(Directory);
A-B Repeat Playback
You can repeatedly play back a designated
section of a DVD or CD.
1. During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2. For DVD, press the $% buttons to select A-. For CD,
press the REPEAT button repeatedly until
appears.
3. Press the v button at the point where you want
repeat play to start (A).
4. Press the v button at the point where you want
repeat play to stop (B).
5. To return to normal playback,
For DVD, press the REPEAT button to select to OFF.
For CD, press the REPEAT button to select to .
| NOTES |
\\ The A-B Repeat function does not operate with DivX,
MP3 or JPEG discs.
\\ For DVD, point B cannot be set until 5 seconds of
playback has elapsed from point A.
Displaying Disc Information
1. During playback, press the TOOLS button on the
remote control.
2. Press the $% buttons to select the desired item.
3. Press the _+ buttons to make the desired setup
change and then press the v button.
• You may use the number buttons of the remote
control to control some items.
4. To make Disc information disappear, press the
TOOLS button again.
| NOTE |
\\ Some tools menus may differ depending on discs and
files.
repeat mode, then press the v button.
| 18 English
MM-J430D-SG-ENG-0708.indd 18
2016/2/4 15:20:01
Special Sound Effects
TOOLS menu
• Title(
) : To access the desired title when there is
more than one in the disc.
• Chapter(
) : Most DVD discs are recorded in
chapters so that you can quickly find a specific chapter.
• Playing time(
) : Allows playback of the film from
a desired time. You must enter the starting time as a
reference. The time search function does not operate
on some discs.
• Audio(
): Refers to the film's soundtrack language.
A DVD Disc can contain up to 8 audio languages.
• Subtitle(
): Refers to the subtitle languages
available in the disc. You will be able to choose the
subtitle languages or, if you prefer, turn them off from
the screen. A DVD Disc can contain up to 32 subtitle
languages.
• Angle(
): When a DVD contains multiple angles of a
particular scene, you can use the Angle function.
TOOLS  $% (select AUDIO, SUBTITLE or ANGLE)
 _+ (select the desired option)
| NOTES |
\\ Depending on the disc, the Subtitle and Audio
Your Micro Component System provides
predefined equalizer settings that are optimized for
particular music genre.
• Operational only in LPMC 2ch stream.
• These functions are not available during playback of a
AC-3 signal.
EQ
1. Press the EQ button.
• Each time you press this button, the sound mode
will switch as following:
FLAT ; ARABIC MUSIC ;PERSIAN MUSIC ;
GENGE ; BONGO ; RHUMBA ; ESKISTA ;
AFROPOP1 ; AFROPOP2 ; INDIAN POP; PARTY
; POP ; HIP HOP; ROCK ; JAZZ ; CLASSICAL
; ELECTRONIC ; OFF
| NOTES |
\\ The equalizer is set to "OFF" automatically and is not
available during a Recording.
Language functions may not be available.
\\ The Angle function works only with discs on which
multiple angles have been recorded.
\\ If no buttons are pressed within 4 seconds, your
• You must have some experience with video extraction
and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi)
in the same file name as that of the DivX media file (*.avi)
within the same folder.
• Up to 60 alphanumeric characters or 30 East Asian
characters (2 byte characters such as Korean and
Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over 148
kbyte is not supported.
POWER BASS
Caption Function
settings will automatically be cancelled and the
previous settings will be saved.
\\ The equalizer mode may be different depending
on your region.
Your Micro-component system has a bass
amplification function called Power Bass.This
function makes the sound more powerful and real.
1. Press the SOUND button on the remote
control.
Result: “ON -POWER BASS” is displayed.
2. To cancel this function, press this button
again, “OFF-POWER BASS” is displayed
for a few seconds.
| NOTES |
\\ The Power Bass is set to "OFF" automatically and
becomes not available during a CD recording.
English
MM-J430D-SG-ENG-0708.indd 19
19 |
2016/2/4 15:20:01
Basic Functions
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Micro Component by using the TV
SoundConnect function.
To disconnect the TV from the Micro
Component
You can disconnect the TV from the Micro
Component.
For instructions, see the TV's user manual.
Connecting the Micro Component to a
SoundConnect Compatible Samsung TV • When the Micro Component is disconnected
Before activating this function, be sure to activate
the Samsung TV's SoundConnect or SoundShare
mode.
1. Press the SOURCE button to display the TV
SOUND CONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Micro Component is connected to
the TV, it will display [TV] Name ;
CONNECTED; TV on the front display.
4. The audio from the connected TV plays over the
Micro Component audio system.
• In TV SoundConnect mode, the Play/
Repeat/Stop/Next/Back functions are not
available.
• The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
• If you unplug the Micro Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Micro
Component into an outlet, and then set the
TV SoundConnect connection again.
• Only one Micro Component at a time can be
connected to a TV via TV SoundConnect.
• To connect to another TV in TV
Soundconnect mode, press the p button
on the main set for more than 5 seconds,
and then connect to the other TV by
following the directions above.
from the TV, the Micro Component will display TV
DISCONNECTED ; REQUEST on its display.
To disconnect the Micro Component from the
TV
Press another mode button on the top panel of the
Micro Component to switch from TV SoundConnect
mode to another mode or turn off the Micro
Component. The currently connected device is
disconnected.
• The connected TV will wait a certain amount of
time for a response from the Micro Component
before terminating the connection.(Disconnection
time may differ, depending on the TV)
• The connection may be lost or sound may stutter
if the distance between the TV and the Micro
Component exceeds 6.5 feet (2 m).
• Instability in the network environment may cause
the connection to be lost or sound to stutter.
• In TV SoundConnect mode, the Micro
Component automatically turns off after 25
minutes if it is not connected to a TV.
| 20 English
MM-J430D-SG-ENG-0708.indd 20
2016/2/4 15:20:02
Listening to the Radio
To Store the Stations You Want
You can store up to15 FM stations.
1 . Select FM by pressing the SOURCE button.
2 . To search for a station, press the STOP
button on the product one or more times until
MANUAL is displayed.
3. Select a station by:
• Pressing and holding the TUNING1,
2 button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5 . If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the ENTER button.
• FM followed by a flashing number appears
in the display. That number is the current
preset number.
Selecting a Stored Station
To listen to a stored station, follow these
steps:
1 . Select FM by pressing the SOURCE button.
2 . Press the STOP button until “PRESET” is
displayed.
3 . Press TUNING 1, 2 on the remote control
to select a preset number.
Display Function
You can view all functions available on the display,
adjust the brightness of the display.
1. Each time you press the DISPLAY button on
the remote control, the display mode will
change as following:
``
The Dimmer function
The Dimmer function is selected and the display
darkens.
``
Display ON
The Display turns on.
``
Clock ON
The Clock you set is displayed.
b. Press the $, % buttons to scroll through
and select a preset number.
• You can select a number from 1 to 15.
c. Press the ¬ button to save the preset.
6 . To store additional radio stations, repeat
Steps 3 to 5.
||NOTES |
✎✎ In Tuner mode
• In the Manual mode, you can use the 1 or
2 button to change stations.
• In the Preset mode, you can use the 1
or 2 button to search for a stored radio
station.
English
MM-J430D-SG-ENG-0708.indd 21
21 |
2016/2/4 15:20:02
Basic Functions
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
POWER ( ) button.
2. Press the TIMER CLOCK button and then
press the v button.
Result: "CLOCK" is displayed.
3. Press the v button.
Result: The hour flashes.
``
``
Decrease the hours: %
Increase the hours: $
4. When the correct hour is displayed, press the
v button.
Result: The minutes flashes.
``
``
Decrease the minutes:%
Increase the minutes: $
5. When the correct minute is displayed, press
the v button.
Result: "
``
TIME" appears in the display.
The current time is now set.
| NOTE |
\\ You can display the time, even when you are using
another function, by pressing the TIMER CLOCK
button once.
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
\\ Before setting the timer, check that the current time is
correct.
\\ For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
\\ If you no longer want the system to switch on or off
automatically, you must cancel the timer by pressing
the TIMER ON/OFF button.
Example: You wish to wake up to music every
morning.
1. Switch the system on by pressing the
POWER (
) button.
2. Press the TIMER CLOCK button and then
press the ▲ or ▼ buttons until TIME is
displayed.
3. Press the v button.
Result: ON is displayed for a few seconds, you
can set the timer switch-on time.
4. Set the timer switch-on time.
a Press the $ or % button.
b Press the v button.
Result: The minutes flash.
c Press the $ or % button.
d Press the v button.
Result: O
FF is displayed for a few
seconds, you can now set the
timer switch-off time.
5. Set the timer switch-off time.
a Press the $ or % button.
b Press the v button.
Result: The minutes flash.
c Press the $ or % button.
d Press the v button.
Result: V
OL XX is displayed, where XX
corresponds to the volume already
set.
6. P
ress $ or % button to adjust the volume level
and press the v button.
Result: The source to be selected is displayed.
7. P
ress the $ or % button to select the desired
source to be played when the system switches on.
`` FM (radio) : a Press the v button.
b Select a preset station by
press the $ or % button.
`` DVD/CD (compact disc): Load one audio CD.
``
USB : Connect the USB device.
8. Press the v button.
Result: C
HKREC (Do you want to record?) is
displayed.
9. Press the v button.
Result: REC N is displayed, you can press the $
or % button to select the REC Y or REC N, and
then press v button.
1).If you select the REC N, it will cancel tuner
timing recording even if you have already set
the tuner timing recording.
| 22 English
MM-J430D-SG-ENG-0708.indd 22
2016/2/4 15:20:03
2).If you select the REC Y, you can set the tuner
timing recording.
a. Press the v button.
Result: ON is displayed for a few seconds,
you can set the tuner timing recording
switch-on time.
b. Press the v button.
Result: OFF is displayed for a few
seconds, you can set the tuner timing
recording switch-off time.
| NOTES |
\\ The maximal tuner timing recording time is 5
hours.
\\ If the auto timer is turned on, the DVD/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
Hence, it is better for you to select the tuner
function instead.
\\ If the timer switch on and off times are identical,
the word ERROR is displayed.
\\ Selecting DVD/CD or USB will automatically
change to TUNER if there is no disc or USB is
inserted.
\\ If the switch-on or -off time is the same as the
timing recording time, only the switch-on or -off
time is effective, and the timing recording time
is not applied.
Cancelling the Timer
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you no
longer wish to use the timer, you can cancel it.
1. To cancel the timer, press the TIMER ON/OFF button
once.
2. To resume the timer, press the TIMER ON/OFF
button again.
| NOTE |
\\ When you select the OFF-TIMER mode, the TIMER
RECORDING and TIME function are not available.
Selecting MY KARAOKE Mode
Press the MY KARAOKE button on the remote
control to diminish the vocal. Each time you
press the MY KARAOKE button on the remote
control, the sound mode will switch between
On and Off.
• OFF: Plays original sound.
• ON: Plays music with the vocal band
diminished.
• My Karaoke mode works only for CDDA/DVD/
MP3/WMA playback and this mode is not
available in Tuner, Bluetooth, AUX, ARC and
TV Sound Connect modes.
• This product does not provide MIC IN jack.
USB Function
Playing Media Files using the USB Host
Feature
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 2.0
channel sound by connecting the storage device to
the USB port of the product.
1. Connect the external USB storage device to
the USB jack of the main unit.
2. Select the USB mode by pressing the
button on the main unit or pressing the
SOURCE button on the remote control.
3. Press the _+ buttons to select Videos, Music
or Photos.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
1. Press the YELLOW(C) button.
-R
EMOVE will appear on the display.
• Remove the USB cable.
| NOTES |
\\ Remove the USB cable from the USB port slowly.
Otherwise, it may cause damage to the USB port.
\\ The product will automatically turn off from no USB
and Stop mode for more than 25 minutes.
\\ A maximum of 999 files can be played per USB device.
English
MM-J430D-SG-ENG-0708.indd 23
23 |
2016/2/4 15:20:04
Basic Functions
Recording Function
You can record from a CD, radio broadcast, or
an external source to a USB storage device.
1. C
onnect an external USB storage device to the
USB ( ) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the SOURCE button on the main unit to select
the DVD/CD function.
• Press the OPEN/CLOSE button to open the disc
tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection ( [ or ] ) buttons to select
the desired song.
Tuner
• Select FM by pressing the SOURCE button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the SOURCE button to select <AUX> input.
• Play a song from the external device.
3. P
ress the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3/WMA/PHOTO/DivX-RECORD DISC
• Press the USB REC button, the current playing file
is copied onto the USB device.
• To copy a music folder, highlight desired folder first
and press USB REC button, the folder is copied.
COPY: “CHECK”“START”“COPY XX”
“COPY END” is displayed. When the copy is done,
“STOP” will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• TUNER:TUNER RCORDING" -->"RECORD"
• AUX:AUX RECORDING" -->"RECORD"
4. T
o stop recording, press the 5 button. The unit
automatically creates and saves recorded files in
.MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the 5 button once again. After recording, a directory
named “RECORDING(DISCxxxx)”(FULL CD
RECORDING), “RECORDING”(TRACK
RECORDING), “CD COPY”(MP3/WMA/
PHOTO/DivX-RECORD DISC), “TUNER
RECORDING” or “AUX RECORDING” is
created in your USB device.
| NOTES |
\\ Do not disconnect the USB or the AC Cord during the
recording as this may cause damage to the file.
\\ If you disconnected the USB device during a
recording, the main unit powers off and you will not be
able to delete the recorded file from your USB device.
If this occurs, please connect the USB device to a PC
and backup the USB data to the PC first, and then
format the USB device.
\\ When the USB memory has insufficient free space, the
system will display “NOT ENOUGH MEMORY”.
\\ The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system
is not supported.
\\ When you use the CD high speed search function, CD
recording is not available.
\\ Sometimes, the recording time may be longer with
some USB devices.
\\ The equalizer and power bass is set to "OFF"
automatically and is not available during a CD
recording.
\\ The REPEAT function is set to "OFF" automatically and
is not available during a CD recording.
\\ You can not record the radio when searching or no
available station is found in the Tuner mode.
\\ Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device’s
volume level.
\\ The maximum TUNER/AUX recording time is 5 hours.
\\ Up to 300MB of a video file can be copied.
Recording Speed
You can select the recording speed before recording.
1. Each time you press the CD REC SPEED
button on the remote control, the recording
speed will change as following:
NORMAL SPEED RECORD ; HIGH SPEED
RECORD
| NOTES |
\\ When you record from the tuner or an external source,
you cannot change the recording speed.
\\ If you select HIGH SPEED RECORD, sound is not
produced during the recording.
| 24 English
MM-J430D-SG-ENG-0708.indd 24
2016/2/4 15:20:04
Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth
compliant devices to interconnect easily with each
other using a short, wireless connection.
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
-- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Micro Component.
-- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
-- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Micro Component with the Bluetooth
device while they are close together.
• The greater the distance between the Micro
Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection is
lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works when the
Bluetooth device and the Micro Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric
interference during its operation.
To connect the Micro Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant stereo
headset function.
• You will see WAIT for a short period of time
and then BT READY on the front display of
the Micro Component.
2 . Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3 . Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4 . Select "[Samsung] MICRO xxxxxx " from
the list.
• When the product is connected to the
Bluetooth device, it will display Device
name ; BT on the front display.
• If the Bluetooth device has failed to pair
with the product , delete the previous
“[Samsung] MICRO xxxxxx ” found by
the Bluetooth device and have it search for
the product again.
5 . You can listen to the music playing on the
connected Bluetooth device over the Micro
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
||NOTES |
\\ The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
\\ The AVRCP feature is not supported.
\\ Connect only to a Bluetooth device that
supports the A2DP (AV) function.
\\ You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
\\ Only one Bluetooth device can be paired at a
time.
\\ You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the Micro Component. If the PIN code
input window appears, enter <0000>.
1 . Press the SOURCE button to display the BT
message.
English
MM-J430D-SG-ENG-0708.indd 25
25 |
2016/2/4 15:20:05
Basic Functions
\\ Once you have turned off the Micro Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
\\ The Micro Component system may not search or
connect properly in the following cases:
-- If there is a strong electrical field around the
Micro Component.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
\\ Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
\\ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Micro Component to restore the
pairing with the Bluetooth device.
\\ The Micro Component automatically turns off
after 25 minutes in the Ready mode.
\\ When a Bluetooth device is connected to the
Micro Component system, the Component
system automatically switches to the
Bluetooth mode if it is in a different mode
(except when it is displaying "REQUEST" in
the TV SoundConnect mode if the Bluetooth
device haven't been paired with the Micro
Component before.).
To disconnect the Bluetooth device
from the Micro Component
You can disconnect the Bluetooth device from
the Micro Component. For instructions, see the
Bluetooth device's user manual.
• The Micro Component will be disconnected.
• When the Micro Component is disconnected
from the Bluetooth device, the Micro
Component will display BT DISCONNECTED
; BT READY on the its display.
To disconnect the Micro Component
from the Bluetooth device
Press the another mode button on the top panel of
the Micro Component to switch from Bluetooth mode
to another mode or turn off the Micro Component. The
currently connected device is disconnected.
||NOTES |
\\ The connected Bluetooth device will wait a
certain amount of time for a response from
the Micro Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
\\ In Bluetooth connection mode, the Bluetooth
connection may be lost if the distance
between the Micro Component and the
Bluetooth device exceeds 16.25 feet (5
meters).
| 26 English
MM-J430D-SG-ENG-0708.indd 26
2016/2/4 15:20:05
Software update
Using Bluetooth Power On
When the product is turned off, you can connect
your smart device to the product via a Bluetooth
connection to turn it on.
1 . Press and hold the SOURCE button to set
the Bluetooth Power On function on. ONBLUETOOTH POWER appears on the
display.
2 . When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer
to your smart device’s manual.)
• The Bluetooth device must have been
paired with the Micro Component before.
3 . When the connection is complete, the product
turns itself on automatically in Bluetooth
mode.
• Select the desired music to play from your
smart device.
||NOTE |
\\ Press and hold the SOURCE button to turn
the Bluetooth Power On function on or off.
Each time you press and hold this button, the
Micro Component displays ON -BLUETOOTH
POWER ; OFF-BLUETOOTH POWER on its
display.
Samsung may offer updates for the product's system firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your product.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
Call Center to receive more information about downloading updates files.
• Select USB function, insert a USB device
containing the firmware update into the USB port
on the main unit.
• Updating firmware may not work properly if audio
files supported by the product are stored in the
USB storage device.
• Do not disconnect the power or remove the USB
device while updates are being applied. The main
unit will turn off automatically after completing the
firmware update.
• After the update, all settings are reset to their
factory default settings. We recommend you write
down your settings so that you can easily reset
them after the update.
If the firmware fails to update, we recommend
formatting the USB device in FAT16/FAT32 and
trying again.
• Once the software update is completed, turn on
the product with no disc inserted. The “NO DISC”
message appears on the display. Press and hold
the STOP button on the main unit for longer than
5 seconds. “INIT ” appears on the display and the
unit powers off. The upgrade is complete.
• Do not format the USB device in the NTFS format.
The product does not support the NTFS file
system.
• Depending on the manufacturer, some USB
devices may not be supported.
• The product has a DUAL BOOT function. If the
firmware fails to update, most functions will
become inoperable and "UPGRADE FIRMWARE"
will appear on the display. Update the firmware
again.
English
MM-J430D-SG-ENG-0708.indd 27
27 |
2016/2/4 15:20:05
Other Information
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is
not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and
contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
• Disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Picture quality is poor and
picture is shaking.
Audio language and subtitles do not
work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN
mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then
select the appropriate function.
• The product is not working.
(Example: The power goes out or the
top panel key doesn't work or a
strange noise is heard.)
• While “NO DISC” message appears on the display of the product, press and hold the 5
button on the main unit for longer than
5 seconds with no disc is inserted (reset function).
• The product is not working normally.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The rating level password has been
forgotten.
• While “NO DISC” message appears on the display of the product, press and hold the main unit's
5 button for longer than 5 seconds. “INIT” appears on the display and all settings will return
to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
| 28 English
MM-J430D-SG-ENG-0708.indd 28
2016/2/4 15:20:06
Specifications
Weight
GENERAL
Dimensions
Main unit
1.20 Kg
Main unit
230 (W) x 115 (H) x 238.5 (D) mm
Speaker
Speaker
Operating Temperature Range
Operating Humidity Range
FM Tuner
Signal/Noise ratio
Usable sensitivity
Total harmonic distortion
DVD (Digital Versatile Disc)
Disc
Video Output
Video/
Audio
Amplifier
CD : 12 cm (COMPACT DISC)
Component Video
HDMI
2.07 Kg
142.5 (W) x 260.5 (H) x 180.5 (D) mm
+5°C~+35°C
10 % to 75 %
55 dB
10 dB
0.6 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
1080p, 1080i, 720p, 480p(576p)
Speaker output
60W/CH (3Ω/100Hz)(MAX)
S/N Ratio
75 dB
Input sensitivity
(AUX) 1.2 V
Frequency range
Channel separation
20Hz~20KHz
60 dB
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Open Source License Notice
-- To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
-- This product uses some software programs which are distributed under the Independent JPEG Group.
For India Only
"This product is RoHS compliant"
English
MM-J430D-SG-ENG-0708.indd 29
29 |
2016/2/4 15:20:07
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact
the SAMSUNG customer care centre.
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
Area
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
TUNISIA
JORDAN
SYRIA
IRAN
MOROCCO
SAUDI ARABIA
TURKEY
` Africa
NIGERIA
GHANA
COTE D’ IVOIRE
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 -Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and Mobile]
02-4222111 [Other landline]
1800-SAMSUNG (726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) 80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
920021230
444 77 11
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860-SAMSUNG (726-7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk /support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp /support
www.samsung.com/my /support
www.samsung.com/ph /support
www.samsung.com/sg /support
www.samsung.com/th /support
www.samsung.com/tw /support
www.samsung.com/vn /support
www.samsung.com/ae /support (English)
www.samsung.com/ae_ar /support (Arabic)
www.samsung.com/eg /support
www.samsung.com/n_africa /support
www.samsung.com/pk /support
www.samsung.com/n_africa /support
www.samsung.com/Levant /support (English)
www.samsung.com/Levant /support (English)
www.samsung.com/iran /support
www.samsung.com/n_africa /support
www.samsung.com/sa /support
www.samsung.com/sa_en /support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr /support
www.samsung.com/support
www.samsung.com/support
AH68-02876G-00
MM-J430D-SG-ENG-0708.indd 30
2016/2/4 15:20:07
Download PDF

advertising