Samsung | DM82E-BR | Samsung DM82E-BR Quick start guide

Reverse Side
RS232C IN
1
RS232C
OUT
Quick Setup Guide
2
IR /
AMBIENT
SENSOR IN
3
DM82E-BR
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
4
AUDIO
OUT
5
SD CARD
6
USB
(5V 1A)
7
USB
(5V 1A) /
TOUCH IN
8
DVI /
MAGICINFO IN
9
DP IN
- The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
HDMI IN 1
0
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
TRAY IN
RGB IN
TOUCH OUT
COMPONENT IN
!
@
#
$
IR
OUT
RJ45
HDMI IN 2
1 Connects to MDC using an RS232C adapter.
- For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
2 Supplies power to the external sensor board or receives the light
sensor signal.
3 Receives sound from a PC via an audio cable.
4 Connects to the audio of a source device.
5 Connect to an SD memory card.
6 Connect to a USB memory device.
- The USB ports on the product accept a maximum constant current
of 1A. If the maximum value is exceeded, USB ports may not work.
7 USB (5V 1A): Connects to a USB device. Make sure the Touch is
not in use.
TOUCH IN: This must be connected to the cable if the Touch is in use.
8 DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting
a network box (sold separately).
9 Connects to a PC using a DP cable.
0 Connects to a source device using an HDMI cable.
! Connects to the Tray, found on the front of the product, using the
OCM cable.
@ Connects to a source device using a D-SUB cable.
# Connects the Touch to a PC.
$ Connects to a source device using the AV/Component adapter.
% Receives the remote control signal via the external sensor board and
outputs the signal via LOOP OUT.
^ Connects to MDC using a LAN cable.
% ^
BN68-07270J-00
Control Panel
Checking the Components
External sensor KIT
Contact the vendor where you purchased the product if any components are missing.
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
Power cord
IR /
AMBIENT
SENSOR IN
MagicInfo Software
DVD
-
+
-
Speaker
+
Batteries
(Not available in some locations)
OCM cable
Remote Control
External sensor KIT
RS232C(IN) adapter
USB cable
Tray
AV/Component adapter
Screw (M4L10, 11 EA)
AUDIO adapter
1 Power on the product.
If you press the button when the product is turned on, the control
menu will be displayed.
1 Light sensor
Automatically detects the intensity of ambient light around a selected
display and adjusts the screen brightness.
2 Move to the upper or lower menu. You can also adjust the value of an option.
2 Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
- Using other display devices in the same space as the remote control
of this product can cause the other display devices to be inadvertently
controlled.
3 Move to the left or right menu.
Cable grip
Wire holders
Contact SAMSUNG WORLD WIDE
Web site: http://www.samsung.com
INDIA
[DM82E-BR-QSG-INDIA]BN68-07270J-00.indd 1
Touch Pen (1 EA)
Double-sided tape (6 EA)
3 Power indicator
The power indicator will turn off when the product is turned on. It will
blink in power-saving mode.
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
2015-06-17 �� 1:02:22
Tray
Installing the Tray
1 Turns the Touch on or off.
2 View menus of the display device.
3 Turns the product on or off.
4 Connect to a USB memory device.
When attaching the Tray, use the screws that came with the package.
5 Connects to a source device using an HDMI cable.
Do not fasten the screws with excessive force. The product may get damaged.
Make sure to connect the USB touch cable to the USB
6 Connects the Touch to a PC.
(5V 1A) / TOUCH IN port on the product.
To use the touch function with a computer or a Network box (sold separately) connected to the product, use a USB cable to connect the TOUCH OUT port on the
product to the
7 Connect the OCM cable to the tray and the TRAY IN port on the product.
port on the computer or Network box.
8 Connect the IR Touch Control cable to the tray.
Troubleshooting Guide
Specifications
Issues
Solutions
Issues
The screen keeps
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
The screen is too bright.
Adjust Brightness and Contrast.
The screen is too dark.
Panel
No Signal is displayed
on the screen.
Check that the product is connected correctly
with a cable.
Screen colour is
inconsistent.
Go to Picture and adjust the Colour Space
settings.
Dimensions (W x H x D)
1911.8 x 1121.7 x 178.0 mm (140 mm Without Handle)
Check that the device connected to the
product is powered on.
White does not really
look white.
Go to Picture and adjust the White Balance
settings.
Weight (without stand)
78.2 kg
Audio Output
10 W + 10 W
There is no sound.
Check the connection of the audio cable or
adjust the volume.
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Not Optimum Mode
is displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
The screen is not clear.
The screen is blurry.
Check the cable connection to the product.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or
ghost images left on the screen settings if required by referring to the
Additional Information on the product menu
screen.
and the Standard Signal Mode Table.
[DM82E-BR-QSG-INDIA]BN68-07270J-00.indd 2
Solutions
Model Name
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does Make sure that the batteries are correctly in
not work.
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
DM82E-BR
Size
207.2 cm
Display area
1805.76 mm (H) x 1015.74 mm (V)
Operating
Temperature : 0 ˚C – 40 ˚C (32 ˚F – 104 ˚F), With PIM : 10 ˚C – 40 ˚C (50 ˚F – 104 ˚F)
Humidity :10% – 80%, non-condensing
Storage
Temperature : -20 ˚C – 45 ˚C (-4 ˚F – 113 ˚F)
Humidity : 5% – 95%, non-condensing
Environmental
considerations
- This device is a Class A digital apparatus.
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
Ⓡ
Ⓡ
Check for any special lighting or neon signs
switched on in the vicinity.
2015-06-17 �� 1:02:23
Download PDF