Samsung | OH55D | Samsung OH55D Quick start guide

Reverse Side
Quick Setup Guide
ILLUMINANCE SENSOR & REMOTE SENSOR
OH46D OH55D
Outdoor Mode (MENU m → System → Fan and Temperature → Outdoor Mode)
To use the product at a low temperature below 0 ˚C, make sure to set Outdoor Mode to "On".
This feature keeps the internal temperature of the product steady so that the product can start
properly when it is powered on.
- Do not disconnect the power cable when this feature is set to "On".
- The product consumes more power when it is turned off if this feature is set to "On" rather
than to "Off".
- If you turn on the product when the ambient temperature is low, there may be an initial delay
when displaying a picture on the screen.
Mount Hole
7
6
1
The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
2
3
4
5
1 Connects to the power box using the MAIN POWER cable.
2 Connects to the power box using the BLU POWER cable.
3 Connect to a USB memory device.
4 - Sends the HDMI signal to a connected LAN cable using an HDBaseT transmitter.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
- Connects to MDC using a LAN cable.
5 Connects to a source device using an HDMI cable.
6 Connects to MDC using an RS232C cable.
BN68-07250F-00
Power Box
Checking the Components
Troubleshooting Guide
N Contact the vendor where you purchased the product if any
components are missing.
Mount Hole
Quick Setup Guide
7 Connects to the audio of a source device.
Warranty card
(Not available in some locations)
Issues
Solutions
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
-
-
+
This message is displayed when a signal from the graphics card exceeds the product’s maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
+
Regulatory guide
Batteries
(Not available in some locations)
2
The images on the screen look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
Adjust Coarse and Fine.
3
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
Remote Control
MAIN POWER cable
1
1 Connect to the power cord.
2 Connect to the MAIN POWER cable to supply power to the
mainboard of the product.
BLU POWER cable
OHD-INDIA-QSG_BN68-07250F-00.indd 1
Power Box
3 Connects to the BLU POWER cable to supply power to the LED
backlight of the product.
The screen appears unstable and shaky.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
There are shadows or ghost images left on with the product. Then, change the screen settings if required by referring to the Additional Information
on the product menu and the Standard Signal Mode Table.
the screen.
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
- Connect the cables to their matching colour ports. Make sure to match
the arrow directions on the power box and cables.
2015-08-24
4:28:07
Connecting and Using a Source Device
Specifications
Model Name
N After all the cables are connected, make sure to close the cover and fasten the screws to
ensure it is water tight.
N To enable audio, connect an external sound output device to the AUDIO OUT port.
Connecting to a PC
OH46D
OH55D
Size
116 cm
138 cm
Display area
1019.2 mm (H) x 573.8 mm (V)
1210.6 mm (H) x 681.4 mm (V)
Dimensions (W x H x D)
1069.0 x 623.6 x 90.3 mm
1260.6 x 731.4 x 90.3 mm
Weight
39.5 kg
50.7 kg
Panel
Connecting the HDBase-T
,
Power Box
HDMI OUT
Synchronization
,
HDBase-T Tx
LAN
HDMI IN
HDMI OUT
Resolution
Power Box area
580.3 mm (H) x 521.7 mm (V)
Dimensions
(W x H x D)
623.5 x 564.9 x 90.0 mm
Weight
8.6 kg
Horizontal
Frequency
30 – 81 kHz
Vertical
Frequency
48 – 75 Hz
Optimum
Resolution
1920 x 1080 @ 60 Hz
Maximum
Resolution
1920 x 1080 @ 60 Hz
LAN Cable
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard
voltage can vary in different countries.
Power Supply
Connecting to a Video Device
HDMI OUT
,
Environmental
considerations
Operating
Temperature: -30 ˚C – 50 ˚C (-22 ˚F – 122 ˚F)
Humidity: 10 % – 80 %, non-condensing
Storage
Temperature: -20 ˚C – 50 ˚C (-4 ˚F – 122 ˚F)
Humidity: 5 % – 95 %, non-condensing
- This device is a Class A digital apparatus.
Connecting to MDC
,
N For details on how to use the MDC programme, refer to Help after installing the programme.
The MDC programme is available on the website.
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
Ⓡ
Ⓡ
Connecting to an Audio System
Contact SAMSUNG WORLD WIDE
HUB
Web site: http://www.samsung.com
INDIA
OHD-INDIA-QSG_BN68-07250F-00.indd 2
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
2015-08-24
4:28:08
Download PDF

advertising