Samsung | UD46E-P | Samsung UD46E-P Quick start guide

Reverse Side
Quick Setup Guide
RS232C OUT
AUDIO
UD46E-P UD55E-P UD55E-S
IR
OUT
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
BN68-07703J-00
External sensor KIT
Contact the vendor where you purchased the product if any
components are missing.
Quick Setup Guide
Check the cable connection between the
product and PC, and ensure the connection is
secure.
The screen is too bright.
Adjust Brightness and Contrast.
The screen is too dark.
No Signal is displayed
on the screen.
Check that the product is connected correctly
with a cable.
Screen colour is
inconsistent.
Go to Picture and adjust the Colour Space
settings.
Check that the device connected to the
product is powered on.
White does not really
look white.
Go to Picture and adjust the White Balance
settings.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
POWER
5
Not Optimum Mode is
displayed.
-
Holder-Ring (4EA) /
Screw (4EA)
UD46E-P_UD55E-P_S-India-QSG_BN68-07703J-00.indd 1
7 D
VI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGIC INFO: Use the (dedicated) DP-DVI cable when connecting a
network box (sold separately).
8 Connects to a source device using a D-SUB cable.
9 Connects to a source device using the AV/Component adapter.
0 Connects to the audio of a source device.
! Receives sound from a PC via an audio cable.
@ Connects to MDC using a LAN cable.
# Connect to a USB memory device.
The screen keeps
switching on and off.
1 Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
2 Light sensor
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
The screen is not clear.
The screen is blurry.
4 POWER button
Use this button for turning the LCD Display on and off.
5 SOURCE button
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
AUDIO adapter
1 Connects to MDC using an RS232C cable.
- For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
2 R
eceives the remote control signal via the external sensor board and
outputs the signal via LOOP OUT.
3 Supplies power to the external sensor board or receives the light sensor signal.
4 C
onnects to a PC using a DP cable.
5 Connects to a source device using an HDMI cable.
6 C
onnects to another product using a DP cable.
- To use old and new models together, first contact the dealer the
product was purchased from to check if they are compatible.
Regulatory guide
AV/Component
adapter
USB
2
3 Power indicator
The power indicator will turn off when the product is turned on. It
will blink in power-saving mode.
DP cable
RGB IN
Issues
+
Remote Control
DP OUT
(LOOPOUT)
Solutions
+
Power cord
HDMI IN 2
Issues
-
MagicInfo Software
DVD
HDMI IN 1
RJ45
OUT
1
4
Batteries
(Not available in some
locations)
DP IN
AV /
COMPONENT
Troubleshooting Guide
3
Warranty card
(Not available in some
locations)
CONTROL IN
DVI IN
(MAGIC INFO)
IN
-- The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
-- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
Checking the Components
RS232C
RS232COUT
IN
Check the cable connection to the product.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or
ghost images left on the screen settings if required by referring to the
Additional Information on the product menu
screen.
and the Standard Signal Mode Table.
Solutions
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does Make sure that the batteries are correctly in
not work.
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
2015-08-20
3:54:40
Connecting to a PC
Connecting to a Video Device
Specifications
Model Name
UD46E-P
UD55E-P / UD55E-S
Size
116.8 cm
138.7 cm
Display area
1018.08 mm (H) x 572.67 mm (V)
1209.6 mm (H) x 680.4 mm (V)
Dimensions (W x H x D)
1022.1 x 576.6 x 97.4 mm
1213.5 x 684.3 x 96.6 mm
Weight (without stand)
16.2 kg
21.5 kg
AV / COMPONENT
RGB IN
Panel
AUDIO IN
AUDIO IN
AV / COMPONENT
DVI IN(MAGIC INFO)
Horizontal Frequency
30 – 81 kHz
Vertical Frequency
48 – 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
Synchronization
AUDIO IN
AUDIO IN
Resolution
HDMI IN 1, HDMI IN 2
HDMI IN 1, HDMI IN 2
Operating
Temperature : 0 ˚C – 40 ˚C (32 ˚F – 104 ˚F)
Humidity : 10% – 80%, non-condensing
Storage
Temperature : -20 ˚C – 45 ˚C (-4 ˚F – 113 ˚F)
Humidity : 5% – 95%, non-condensing
Environmental
considerations
AUDIO IN
AUDIO IN
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Power Supply
-- This device is a Class A digital apparatus.
HDMI IN 1, HDMI IN 2
HDMI IN 1, HDMI IN 2
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
Connecting an External Monitor
DP IN
Ⓡ
Ⓡ
DP OUT (LOOPOUT)
Contact SAMSUNG WORLD WIDE
Connecting to an Audio System
Web site: http://www.samsung.com
Connecting the LAN Cable
INDIA
RJ45
AUDIO OUT
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair
Connecting to MDC
RS232C IN
RJ45
RS232C OUT
RS232C OUT
RS232C IN
RS232C IN
RS232C OUT
RS232C OUT
RS232C IN
UD46E-P_UD55E-P_S-India-QSG_BN68-07703J-00.indd 2
RS232C IN
2015-08-20
3:54:44
Download PDF

advertising