Samsung | AS18FBAN | Samsung AS24FAX User Manual

ENGLISH
FRANÇAIS
ITALIANO
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Split-type Room Air Conditioner
EΛΛHNIKA
(Cool)
DEUTSCH
PORTUGUÊS
AS09F
AS12F
AS18F
AS24F
AS09J
AS12J
AS18J
AS24J
AS09W
AS12W
AS18W
AS24W
ESPAÑOL
USER’S MANUAL
E S F I P D G DB98-26505A(2)
DB98-26505A(1)-E.indd 21
2006-11-11 12:54:20
Register your product at www.samsung.com/global/register
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
DURING
OPERATION
Risk of electric shock. • Can cause injury or death. • Disconnect all
remote electric power supplies before servicing, installing or cleaning.
• This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
 Users of this product are cautioned not to attempt repair of this product
at their own discretion. Instead, they are requested to directly contact a
designated service center or the outlet at which the product was
purchased.
 Never spill any kind of liquid into the unit. Should this happen, unplug
or main switch off the unit and contact an authorized service center.
 Do not insert anything between the air outlet blades because the inner
fan may be damaged and could cause injury. Keep children away from
the unit.
 Do not place any obstacles in front of the unit.
 Do not spray liquid of any kind into the indoor unit. Should this happen,
switch off the breaker used for your air conditioner and contact your
installation specialist.
 Make sure that the unit is correctly ventilated at all times:
Do not place clothing or other materials over it.
 If the wireless remote control will not be used for a long time, remove
the batteries. (If applicable)
 When using a wireless remote control, the distance should not be
more than 7 meters from the air conditioner. (If applicable)
DISPOSING OF THE UNIT
 Before throwing out the device, it is necessary to pull back the battery
cells and get rid of them safely for recycling reasons.
 When you need to dispose of the unit, consult your dealer. If pipes are
removed incorrectly, refrigerant may blow out and come into contact
with your skin, causing injury. Releasing refrigerant into the atmosphere
also damages the environments.
 Please recycle or dispose of the packaging material for this product in
an environmentally responsible manner.
OTHERS
 Never store or ship the air conditioner upside down or sideways to
avoid damage to the compressor.
 The appliance is not intended for use by young children or infirm
persons without supervision: Young children should be supervised to
ensure that they do not play with the appliance.
 Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
E-2
DB98-26505A(1)-E.indd 2
2007-2-25 9:52:02
ENGLISH
Contents
PREPARING YOUR AIR CONDITIONER
Safety Precautions................................................................. 2
View of the Unit ..................................................................... 4
Remote Control - Buttons and Display .................................. 6
Inserting the Remote Control Batteries ................................. 6
Getting Started....................................................................... 7
OPERATING YOUR AIR CONDITIONER
Selecting the Automatic Operating Mode .............................. 8
Cooling Your Room ............................................................... 9
Removing Excess Humidity ................................................. 10
Airing Your Room ................................................................ 11
Changing the Room Temperature Quickly .......................... 12
Adjusting the Air Flow Direction Vertically ........................... 13
Adjusting the Air Flow Direction Horizontally....................... 13
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ........................................................... 14
Setting the Off Timer ........................................................... 15
Selecting Good Sleep Mode ................................................ 16
RECOMMENDATIONS FOR USE
Operating Recommendations .............................................. 16
Temperature and Humidity Ranges..................................... 17
Operating Your Air Conditioner Without the Remote Control ........... 17
Solving Common Problems ................................................. 18
Cleaning Your Air Conditioner ............................................. 19
Cleaning Deodorizing and Bio filter (Option) ....................... 19
E-3
DB98-26505A(1)-E.indd 3
2007-2-25 9:52:02
View of the Unit
The design and shape are subject to change according to the model.
Indoor Unit
Air Inlet
Temperature sensor
Power(On/Off) button
Air filter
(under the grille)
Air flow blades
(outlet)
Operation indicator
(GREEN)
Timer indicator
(GREEN)
Turbo indicator
(RED)
Power(On/Off) button
ASFSeries
ASJSeries
ASWSeries
E-4
DB98-26505A(1)-E.indd 4
2007-2-25 9:52:03
ENGLISH
Outdoor Unit AS09Series
Air Inlet (Rear)
Air Outlet
Connection Valve
Outdoor Unit AS12Series
Air Inlet (Rear)
Air Outlet
Connection Valve
Outdoor Unit AS18Series
Air Inlet (Rear)
Air Outlet
Connection Valve
Outdoor Unit AS24Series
Air Inlet (Rear)
Air Outlet
Connection Valve
E-5
DB98-26505A(1)-E.indd 5
2007-2-25 9:52:07
Remote Control - Buttons and Display
Remote control
transmission indicator
Operating mode
( AUTO, COOL,
DRY, FAN)
Temperature setting
Mode selection button
(AUTO, COOL,
DRY, FAN)
Temperature adjustment
buttons
Turbo mode
Turbo button
Good Sleep mode
Fan speed adjustment
button
Swing button
Fan speed
Air flow direction
On Timer setting
On Timer button
Off Timer setting
Off Timer button
Battery discharge indicator
On/Off &
Timer Set/Cancel button
Good Sleep button
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
 You purchase the air conditioner
 The remote control does not work correctly
Note
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
Push the battery cover on the rear of the remote control with your
thumb in the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E-6
DB98-26505A(1)-E.indd 6
2007-2-25 9:52:15
ENGLISH
Getting Started
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your
air conditioner. Please take the time to read it as it will help you take full
advantage of the unit’s features.
The booklet is organized as follows.
 The following figures are shown on pages from 4 to 6 :
- Indoor and outdoor units
- Remote control(buttons and display)
They will help you find the buttons and understand the symbols displayed.
 In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-7
DB98-26505A(1)-E.indd 7
2007-2-25 9:52:17
Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote
control.
1
If necessary, press the
Result:
IMPORTANT
2
3
button.
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Auto mode.
The Auto mode cools the room in optimum
condition by adjusting the indoor temperature
depending on the set temperature.
Note
You can change modes at any time.
button.
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
E-8
DB98-26505A(1)-E.indd 8
2007-2-25 9:52:20
ENGLISH
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
Cooling temperature
Fan speed when cooling
1
If necessary, press the
Result:
IMPORTANT
2
3
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
 If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
Select the fan speed by pressing the
until the required setting is displayed:
Automatic (rotated :
Low
Medium
High
Maximum
Result:
5
button.
button one or more times until
To adjust the temperature, press the
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
4
button.
Each time you press the
button one or more times


)
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 13.
E-9
DB98-26505A(1)-E.indd 9
2007-2-25 9:52:24
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
Result:
IMPORTANT
2
3
If the
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Dry mode.
Note
You can change modes at any time.
button.
button one or more times until
To adjust the temperature, press the
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
4
button.
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
The fan is running in auto mode.
To control the direction of the air flow, refer to page 13.
E-10
DB98-26505A(1)-E.indd 10
2007-2-25 9:52:28
ENGLISH
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
Result:
2
3
If the
button.
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
Select the fan speed by pressing the
until the required setting is displayed:
button.
button one or more times
Low
Medium
High
Result:
4
Each time you press the
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 13.
E-11
DB98-26505A(1)-E.indd 11
2007-2-25 9:52:31
Changing the Room Temperature Quickly
The Turbo cooling function is used to cool your room as quickly as
possible.
Example :
You have just come home and find that the room is very
hot. You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the
Result:
2
Press the
Result:
3
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
button.
The temperature and fan settings are adjusted automatically.
The air conditioner cools the room as quickly as possible.
After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
You can select the Turbo function in the Auto and Cool mode.
If you select this function in the Dry or Fan mode, it will return to
the Auto mode.
If you wish to stop the Turbo function before the end of the 30-minute period,
button one or more times until
disappears.
press the
Result:
4
button.
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to page 13.
E-12
DB98-26505A(1)-E.indd 12
2007-2-25 9:52:34
ENGLISH
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air flow blade on the bottom
of the unit, thus increasing the efficiency of the air conditioner.
1
Press the
Result:
2
The outer blade is adjusted vertically.
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
button.
Result:
3
button one or more times as required.
The blade move up and down, around the base position set.
To stop the blade moving up and down, press the
Note
button again.
If you switch the air conditioner...
Then the blade is...
Off
Closed completely.
On again
Set to the initial position powered.
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E-13
DB98-26505A(1)-E.indd 13
2007-2-25 9:52:37
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
Result:
3
button to complete the setting.
The remaining time is displayed.
Blinking of the timer indicator stops.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On Timer setting.
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result:
The air conditioner will run in the selected mode when it is
turned on.
Note
If you don’t operate the remote control after setting the On Timer,
it will be turned off automatically after 25 hours.
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1
To cancel the On Timer, press the
the timer setting disappears.
2
Press the
Note
button one or more times until
button.
If you want to turn on the air conditioner before the timer reaches
the setting time, press the
button.
E-14
DB98-26505A(1)-E.indd 14
2007-2-25 9:52:40
ENGLISH
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
button to complete the setting.
Result:
The remaining time is displayed.
Blinking of the timer indicator stops.
The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off Timer setting.
Example
If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
1. Press the
2. Press the
3. Press the
4. Press the
Note
button until ‘2 Hr’ is displayed.
button.
button until ‘4 Hr’ is displayed.
button.
You can see or change the setting mode and/or the temperature
button or the
button after setting the
by pressing the
Off Timer.
To Cancel the Off Timer
If you no longer wish to use the Off Timer that you have set, you can
cancel it at any time.
1
To cancel the Off Timer, press the
the timer setting disappears.
2
Press the
Note
button one or more times until
button.
If you want to turn off the air conditioner before the timer reaches
the setting time, press the
button.
E-15
DB98-26505A(1)-E.indd 15
2007-2-25 9:52:46
Selecting Good Sleep Mode
For cool only model: The Good Sleep function can be set whether the air
conditioner is switched on or off, and this function can be selected for any mode.
Selecting the Good Sleep mode, as a default, the Off Timer will switch off the
button to
air conditioner after 8 hours automatically, or you can press the
set Off Timer in the range from 0.5 hour to 12 hours.then press the
button
to confirm this selection, during the period of Good Sleep mode, the possible
temperatures are between 16°C and 30°C inclusive, but the fan speed and the
direction of the air flow is nonadjustable.
1
Press the
button one or more times until
remote control.
Result:
is displayed on your
The indoor unit beeps
If Good Sleep is selected after switching on the unit, the air
conditioner will run in Cool mode. During this period, the temperature
displayed is one you set for the Cool mode. If the Good Sleep is
selected before switch on the unit, the air conditioner starts
running in Cool mode and the temperature is set to 26°C.
The fan is running in auto mode.
To Cancel the Good Sleep
If you no longer wish to use the Good Sleep that you have set, you can
cancel it at any time.
button to switch off the air conditioner.
1
press the
2
To cancel a selected Good Sleep mode, you can also press the
,
or
button .
,
Operating Recommendations
Here are a few recommendations that you should follow when using
your air conditioner.
Topic
Recommendation
Power failure
If a power failure occurs when the air
conditioner is operating, the unit is switched off.
When the power returns, the air conditioner
starts up again automatically.
E-16
DB98-26505A(1)-E.indd 16
2007-2-25 9:52:50
ENGLISH
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperatures
The automatic protection feature may be triggered and the air conditioner stopped.
Low temperatures
A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
Mode
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Cooling
19°C to 43°C approx.
16°C to 32°C approx.
80% or less
Drying
19°C to 43°C approx.
16°C to 32°C approx.
-
If the cooling operation is used at over 32°C(indoor temperature), it does not cool at its full capacity.
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the remote control is lost or broken.
1
To switch the air conditioner on, press the ON/OFF switch on the right
side of the indoor unit.
Result:
2
The OPERATION indicator on the indoor unit comes on.
The indoor unit beeps.
The air conditioner starts up in the appropriate mode for
the room temperature.
To switch the air conditioner off, press the ON/OFF switch again.
Note
Even if the air conditioner has been switched on via the
ON/OFF switch, operations can still be controlled using the
remote control as usual.
E-17
DB98-26505A(1)-E.indd 17
2007-2-25 9:52:51
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all
Check that the breaker used for the air conditioner is switched on.
Check that the operation indicator on the indoor unit is on;
if necessary press the button on the remote control.
Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 14 and 15 for further details)
The air conditioner does not
operate with the remote control
Check that there are no obstacles between you and the indoor unit.
Check the remote control batteries.
Check that you are close enough to the indoor unit
(seven meters/yards or less).
No beep is heard when you press
Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
Replace the remote control batteries if necessary.
on the remote
the
control
The air conditioner does not cool
Check that the correct operating mode has been selected
(Auto, Cool).
The room temperature may be too low.
Dust may be blocking the air filter guard; refer to page 19 for
cleaning instructions.
Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change
button
when you press the
Check that the operating mode is set to the Auto, Cool or Fan
mode ; in the Dry mode, the fan speed changes automatically.
The air flow direction does not
change when you press the
button
Check that the air conditioner has been switched on; if necessary,
The timer is not correctly triggered
Check that the timer has been programmed correctly; see pages 14
and 15.
Odour is permeated in the room
during air conditioning
Air the room.
press the
button on the remote control.
E-18
DB98-26505A(1)-E.indd 18
2007-2-25 9:52:52
ENGLISH
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must
clean it regularly to remove the dust that accumulates on the air filter.
IMPORTANT
Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.
1
Open the upper front grille by pulling the lower right and left tabs
of the grille.
2
Pull air filters out of each tab of the grille.
3
Remove all dust on the air filters with a vacuum cleaner or brush.
4
When you finished, insert air filters by fixing it to each tab of the grille.
5
To close the front grille, fix it to hooks and push down the lower
right and left tabs of the grille.
6
Clean the front grille with a damp cloth and mild detergent
(do NOT use benzene, solvents or other chemicals).
Front grille
Note
Air filter
Body groove
Body
Front grille
Hook
If you have not used the air conditioner for a long period of time,
set the fan going for three to four hours to dry the inside of
the air conditioner thoroughly.
Body
Cleaning Deodorizing and Bio filter (Option)
To remove minute dust particles and odors, deodorizing and Bio filter
are installed in the air conditioner. You should clean the filters every
3 months.
1
Open the upper front grille by pulling the lower right and left tabs of
the grille.
2
Pull out the deodorizing and Bio filter.
3
Wash the filters with clean water, then dry them in the shade.
4
Insert the filters into the original position.
Note
5
Deodorizing Filter
Bio Filter
You can change the position of filters with each other.
Close the front grille.
E-19
DB98-26505A(1)-E.indd 19
2007-2-25 9:52:54
Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung product, contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
02 201 2418
844 000 844
70 70 19 70
030-6227 515
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
FRANCE
3260 SAMSUNG or
08 25 08 65 65 ( 0,15/min)
www.samsung.com/fr
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
REPUBLIC OF IRELAND
SWITZERLAND
01805 - 121213 ( 0,14/min)
06-80-SAMSUNG (7267864)
800 SAMSUNG (7267864)
0032 (0)2 201 24 18
0900 20 200 88 ( 0,10/min)
815-56 480
0 801 801 881
80 8 200 128
0800-SAMSUNG (726786)
902 10 11 30
0771-400 200
0870 SAMSUNG (7267864)
0818 717 100
0800-SAMSUNG (7267864)
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/uk
www.samsung.com/ch
C Samsung Electronics Co., Ltd. All Rights Reserved.
FORTE_IB_E.indd 28
2007-2-16 14:59:13
Download PDF