Samsung | LE32R83B | Samsung LE32R82B User manual

LCD TV
LE32R8
LE37R8
LE40R8
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
REPUBLIC OF IRELAND
U.K
Customer Care Centre
0818 717 100
0870 SAMSUNG (7267864)
Web Site
www.samsung.com/uk
www.samsung.com/uk
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-01166E-01
BN68-01166E-01Cover.indd 1
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
2007-03-07 �� 11:40:37
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and fit the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01166E-Eng-0307.indd 1
2007-03-07 �� 11:41:53
Contents
Connecting and Preparing Your TV










List of Parts...........................................................2
Installing the Stand...............................................2
Installing the Wall Mount Kit..................................2
Viewing the Control Panel.....................................3
Viewing the Connection Panel..............................4
Viewing the Remote Control.................................6
Installing Batteries in the Remote Control............7
Switching On and Off............................................7
Placing Your Television in Standby Mode.............7
Plug & Play...........................................................8
Setting the Channels







Storing Channels Automatically............................9
Storing Channels Manually.................................10
Setting the Channel Lists....................................11
Activating the Child Lock....................................11
Sorting the Stored Channels...............................12
Assigning Channels Names................................12
Fine Tuning Channel Reception.........................13
Setting the Picture












Changing the Picture Standard...........................13
Adjusting the Custom Picture.............................14
Changing the Colour Tone..................................14
Activating Backlight.............................................15
Configuring Detailed Settings on the Picture... 16
Changing the Picture Size..................................17
Freezing the Current Picture...............................18
Selecting the Screen Mode.................................18
Resetting the Picture Settings to the Factory
Defaults...............................................................18
Digital NR / Active Colour / DNIe / Movie Plus . .19
Viewing the Picture In Picture (PIP)....................20
HDMI Black Level...............................................21
Setting the Sound









Changing the Sound Standard...........................21
Adjusting the Sound Settings..............................22
Setting the TruSurround XT (SRS TS XT)..........22
Connecting Headphones....................................23
Selecting the Sound Mode..................................23
Adjusting the Volume Automatically....................23
Selecting the Internal Mute.................................24
Listening to the Sound of the Sub Picture..........24
Resetting the Sound Settings to the Factory
Defaults...............................................................25
Symbol
Press
Setting the Time



Setting and Displaying the Current Time............25
Setting the Sleep Timer......................................26
Switching the Television On and Off
Automatically.......................................................26
Function Description








Choosing Your Language...................................27
Using Game Mode..............................................27
Setting the Blue Screen Mode /
Selecting the Melody .........................................28
Setting the Home Theater PC.............................28
Setting the Light Effect........................................29
Using the Energy Saving Feature.......................29
Selecting the Source...........................................30
Editing the Input Source Names.........................30
Using the Teletext Feature






Teletext Decoder.................................................31
Displaying the Teletext Information.....................32
Selecting a Specific Teletext Page......................32
Using Fastext to Select a Teletext Page.............33
Setting Up Your Remote Control.........................33
Remote Control Codes.......................................34
Setting the PC




Setting up Your PC Software (Based on
Windows XP)......................................................37
Display Modes....................................................37
Setting the PC.....................................................38
Wall-Mount Adjustment (LE40R8)
(Sold separately).................................................39
About Anynet+







What is Anynet+? . .............................................40
Connecting Anynet+ Devices..............................40
Setting Up Anynet+.............................................41
Scanning and Switching between Anynet+
Devices...............................................................41
Recording...........................................................42
Listening through a Receiver..............................43
Check Points before Requesting Service...........43
Recommendations For Use






Using the Anti-Theft Kensington Lock.................44
Troubleshooting: Before Contacting
Service Personnel...............................................44
Technical and Environmental Specifications . ....45
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
Important
Note
One-Touch
Button
English - 1
BN68-01166E-Eng-0307.indd 1
2007-03-07 �� 11:41:54
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Power Cord
Stand Screw
X4
Cover-Bottom
 Owner’s Instructions
Stand
Cleaning Cloth
 Registration Cards
Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
<3>
<2>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English - BN68-01166E-Eng-0307.indd 2
2007-03-07 �� 11:41:56
Viewing the Control Panel
1
2
3
4
5
[LE32R81, LE37R81, LE40R81,
LE32R83, LE37R83, LE40R83]
6
7
1
2
3
4
5,6
7
[LE32R82, LE37R82, LE40R82,
LE32R84, LE37R84, LE40R84]
Front Panel buttons
Touch the right side of
each button to operate.
The product colour and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the 5 and 6 buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
2 MENU
5 (Power)
Press to see an on-screen menu of your TV’s Press to turn the TV on and off.
features.
Power Indicator
Blinks and turns off when the power is on and
3
lights up in stand-by mode.
Press to decrease or increase the volume.
In the on-screen menu, use the
6 Remote Control Sensor
buttons as you use the  and  buttons on Aim the remote control towards this spot on the remote control.
the TV.
7 Speakers
English - BN68-01166E-Eng-0307.indd 3
2007-03-07 �� 11:41:58
Viewing the Connection Panel
1
2
3
4
3
5
0
9
8
Power Input
7
6
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
Connector
EXT 1
EXT 2
Input
Audio (L/R)
O
O
Video
O
O
Output
Video + Audio (L/R)
Only TV output is available.
Output you can choose.
RGB
O
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2 Connecting AUDIO
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theater.
3
HDMI IN 1,HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and
multiple channels of digital audio (5. 1 channels).
-T
he HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi
- channel digital audio.
DVI IN (HDMI 2) (AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal.
Y
ou should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R AUDIO - L” terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
English - BN68-01166E-Eng-0307.indd 4
2007-03-07 �� 11:41:59
4Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
6 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (5) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
7 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.
8 SERVICE
- Service connection for qualified service engineer.
- Auto Wall-Mount (Refer to page 39)
9Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.
-T
he PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0 Kensington Lock
-T
he Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - BN68-01166E-Eng-0307.indd 5
2007-03-07 �� 11:41:59
Viewing the Remote Control
1Selects a target device to be
controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)
(Refer to page 34~36)
2Television Standby button
3Number buttons for direct
channel access
4One/Two-digit channel selection
cP : Next channel
P : Previous channel
dExit the OSD
eControl the cursor in the menu
fUse to see information on the current broadcast
gPicture freeze
5It display "Channel List"
on the screen.
hRuns the Anynet view functions and sets up Anynet devices.
6Selects the TV mode directly
iPicture size selection
7VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
jPIP:Picture-In-Picture On/Off
SOURCE: Input source selection
POSITION: PIP position selection
P : Next channel
P : Previous channel
8 Volume increase
Volume decrease
9Temporary sound switch-off
0Menu display and
change confirmation
!Sound mode selection
@Returns to the previous
menu
#Picture effect selection
%Sound effect selection
^SRS TS XT selection
&Adjusts 5 separate devices
- TV, DVD, STB, CABLE, or VCR.
*When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume,
channel buttons) light up
for a few seconds and then
turn off to save power. This
function is to conveniently
use the remote control at
night or when dark.
(Available source selection
)Previous channel
aAutomatic Power-off
bRecords for Live
(Anynet+ function only)
(Refer to page 40)
kWhen your remote does not work, change the batteries and press the "RESET"
button for 2-3 seconds before use.
Teletext Functions
6Exit from the teletext display
0Teletext index
$Alternately select Teletext, Double, or Mix.
(Teletext mode selection (LIST/FLOF)
)Teletext sub page
cP : Teletext next page
P : Teletext previous page
dTeletext cancel
fTeletext reveal
!#gi
Fastext topic selection
jPIP:Teletext Hold
jSOURCE: Teletext Store
jPOSITION: Teletext size selection
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
English - BN68-01166E-Eng-0307.indd 6
2007-03-07 �� 11:42:00
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial. English - BN68-01166E-Eng-0307.indd 7
2007-03-07 �� 11:42:01
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1.Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK"
selected.
2.Select the appropriate language by pressing the ▲ or ▼
buttons.
Press the ENTER/OK button to confirm your choice.
Plug & Play
Start Plug & Play.
OK
EnterExit
3. Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the side panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER/OK button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
7. Press the ENTER/OK button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► buttons.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ buttons.
You can also set the hour and minute by pressing the number buttons on the remote control.
8. Press the ENTER/OK button to confirm your setting.
 Language: Select your language.
 Country: Select your country.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
English - BN68-01166E-Eng-0307.indd 8
2007-03-07 �� 11:42:01
If you want to reset this feature...
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
Setup
Plug & Play 
Language
:English 
Time 
Game Mode
:Off 
Blue Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watchung Mode On 
More
Move Enter
Return
Plug & Play
Start Plug & Play.
OK
Enter
- Storing Channels Automatically
- Storing Channels Manually
TV
Return
Channel
Country
:Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
English - BN68-01166E-Eng-0307.indd 9
2007-03-07 �� 11:42:03
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.
6. Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.
7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
8. Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel". Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the  or 
button. Press the  button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
English - 10
BN68-01166E-Eng-0307.indd 10
2007-03-07 �� 11:42:03
Setting the Channel Lists
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
Channel List
P 1 C3
1 / 10
Prog.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
C--
1
C3
2
BBC 1
3 C74
3. Press the ENTER/OK button again, to select "Channel List".
4. Press the ► button to select "
0
4 C75
5 C76
" line.
6 S3
7 S4
5. Press the ▲ or ▼ button to select the undesired channel,
then press the ENTER/OK button to cancel.
8 S6
9 S7
6. Repeat steps 5 for each channel to be selected or canceled
Add
7. Press the EXIT button to exit.
"
" is active when "Child Lock" is selected to "On".
Lock
Move
Enter
Page
Return
You can select these options by simply pressing the CH LIST button on the remote control
Activating the Child Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so
keep the remote control away from children.
Channel Manager
Channel List
Child Lock
:
Off
On
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
Move 4. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
0
C--
1
C3
2
BBC 1
5. Press the ▲ or ▼ button to select "Channel List",
then press the ENTER/OK button.
3 C74
6. Press the ► button to select " " line.
5 C76
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive.
BBC1
1 / 10
Prog.
8. Repeat steps 7 for each channel to be locked or unlocked.
Return
Channel Liat
P 2 C4
3. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER/OK button.
7. Press the ▲ or ▼ button to select the channels you want to lock, then press the ENTER/OK button.
Enter
4 C75
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
English - 11
BN68-01166E-Eng-0307.indd 11
2007-03-07 �� 11:42:05
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
TV
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER/OK button.
Channel
Country
:Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter
TV
4. Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER/OK button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
Return
Sort
Prog.
0
1
2
3
4
3. Select the channel number that you wish to change by press
ing the ▲ or ▼ button repeatedly. Press the ENTER/OK button.
The selected channel number and name are moved to right side.







Ch. Name

C-
C23
C16
C3
S1

Move Enter
Return
6. Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER/OK button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER/OK
button.
T
he selection bar is displayed around the name box.
4.
To...
Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER/OK button
Channel
Country
:Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Name
Prog.
0
1
2
3
4
Ch.

C--
C23
C16
C3
S1

Move Name
---------
------------Enter
Return
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 12
BN68-01166E-Eng-0307.indd 12
2007-03-07 �� 11:42:07
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
TV
Channel
Country
:Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER/OK button.
Move Enter







Return
Fine Tune
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER/OK button.
P1
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the ENTER/OK button.
0
Reset
Adjust Save
Return
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ENTER/OK button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
TV
 Dynamic: Selects the picture for high-definition in a bright
room.
 Standard: Selects the picture for optimum display in a
normal environment.
 Movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input source.
Picture
Mode
:Dynamic 
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1 
Detailed Settings 
Backlight
:10 
sMore
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 18)
Move Enter
Return
Picture
Dynamic
Mode
:Dynamic
Standard 100
Contrast
Movie 50
Brightness
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1
Detailed Settings
Backlight
:10
sMore
Move Enter
Return
You can also press the P.MODE button on the remote control to select one of the
picture settings.
English - 13
BN68-01166E-Eng-0307.indd 13
2007-03-07 �� 11:42:09
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
TV
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2.Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.
3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.
Picture
Mode
:Dynamic 
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1 
Detailed Settings 
Backlight
:10 
sMore
Move Enter
Return
4. Press the EXIT button to exit.
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more
natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
“Tint” function is available only in “HDMI” and “Component” mode.
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
TV
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 13)
2. Press the  or  button to select "Colour Tone", then press
the ENTER/OK button.
3. Press the  or  button to select the desired colour tone
setting. Press the ENTER/OKbutton.
4. Press the EXIT button to exit
TV
 Cool2: Makes the colour temperature bluer than "Cool1" menu.
 Cool1: Makes whites bluish.
 Normal: Keeps whites white.
 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature redder than
"Warm1" menu.
Picture
Mode
:Dynamic 
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1 
Detailed Settings 
Backlight
:10 
sMore
Move Enter
Return
Picture
Mode
:Dynamic
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50 Cool 2 R50
Colour Tone
:Cool1
Cool 1
Detailed Settings
Normal
Backlight
:10
Warm 1
sMore
Warm 2
Move Enter
Return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
English - 14
BN68-01166E-Eng-0307.indd 14
2007-03-07 �� 11:42:10
Activating Backlight
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 13)
2.Press the ▲ or ▼ button to select “Backlight”, then press the ENTER/OK button.
3.Press the ◄ or ► button to decrease or increase the value of a particular item.
4. Press the ENTER/OK button.
TV
Picture
Mode
:Dynamic 
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1 
Detailed Settings 
Backlight
:10 
sMore
Move Enter
Backlight
Press the EXIT button to exit.
Return
10
Adjust Return
English - 15
BN68-01166E-Eng-0307.indd 15
2007-03-07 �� 11:42:11
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
1. Press the MENU button to display the menu.
2. Press the ENTER/OK button, to select "Picture".
3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER/OK button.
4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space
5. When you are satisfied with your setting, press the
ENTER/OK button.
6. Press the EXIT button to exit.
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
Picture
Mode
:Movie 
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint
G50
R50
Colour Tone
:Cool1 
Detailed Settings 
Backlight
:10 
sMore
Move Enter
Detailed Settings
Black Adjust
:Off
Dynamic Contrast:Off
Gamma
:-3
White Balance
My Colour Control
Edge Enhancement:Off
Colour Space
:Auto
Move Enter
Return







Return
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
 Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
 Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
 Gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.

White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.

My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
 Edge Enhancement: Off/On
You can emphasize object boundaries.
 Colour Space: Auto/Wide
You can set the color reproduction space for the input signal to Auto or Wide.
English - 16
BN68-01166E-Eng-0307.indd 16
2007-03-07 �� 11:42:12
Changing the Picture Size
You can select the picture size which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ▲ or ▼ button to select "Size", then press the ENTER/OK button.
3. Select the required option by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Picture
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move :Auto Wide
:16 : 9
:Off
:Off
:Off
:Off
:OK
Enter







Return
Size
4. Press the EXIT button to exit.
 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 Wide Zoom: Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.
 Just Scan: Displays the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom : Select
by pressing the ◄ or ► buttons.
Use the ▲ or ▼ button to move the picture up and
down. After selecting , use the ▲ or ▼ button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the by pressing the
► or ENTER/OK button.
Auto Wide
16 : 9
Wide Zoom
Zoom
4:3
Just Scan
Move Enter
Return
You can select these options by simply pressing the P.SIZE button on the remote control.
English - 17
BN68-01166E-Eng-0307.indd 17
2007-03-07 �� 11:42:13
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this function is intended for users to select it.
1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.
2. Press the ▲ or ▼ button to select "Screen Mode", then press the ENTER/OK button.
3.
Select the required option by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Available options: 16:9, Wide Zoom, Zoom, 4:3
 16:9: Sets the picture to 16:9 wide mode.
 Wide Zoom: Magnify the size of the picture more than 4:3.
 Zoom: Magnify the size of the picture vertically on screen.
 4:3: Sets the picture to 4:3 normal mode.
4. Press the EXIT button to exit.
Picture
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move
Move :Auto Wide
:16 : 9
:Off
:Off
:Off
:Off
:OK
Enter
Enter







Return
Return
Picture
rMore
Size
:Auto Wide
16:9
Screen Mode
:16 : 9
Wide Zoom
Digital NR
:Off
Zoom
Active Colur
:Off
4:3
DNle
:Off
Movie Plus
:Off
Reset
:OK Move Enter
Return
Picture Size is available in Auto Wide mode This function is not available in PC or Component, HDMI
mode.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 13.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel". Press the ENTER/OK button.
Picture
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move 4. Press the EXIT button to exit.
:Auto Wide
:16 : 9
:Off
:Off
:Off
:Off
:OK
Enter







Return
Picture
The "Reset" will be set for each picture mode.
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move :Auto Wide
:16 : 9
:Off
:Off
:Off
:Off
:OK
Cancel
OK
Enter
Return
English - 18
BN68-01166E-Eng-0308.indd 18
2007-03-08 �� 3:11:30
Digital NR / Active Colour / DNIe / Movie Plus
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Digital NR, Active Colour, DNIe, Movie
Plus.
Picture
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move :Auto Wide
:16 : 9
:Off
:Off
:Off
:Off
:OK
Enter







Return
3. When you are satisfied with your setting, press the ENTER/OK button.
4. Press the EXIT button to exit.
 Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
 Active Colour: Off/On
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.

This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
D
NIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your
eyes.
This function is not available in PC mode.
This function is not available in Movie mode
 Movie Plus: Off/On
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
The Wide Zoom, Zoom and Just Scan mode is not supported.
This function is not available in PC mode.
English - 19
BN68-01166E-Eng-0307.indd 19
2007-03-07 �� 11:42:16
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "PIP", then press the ENTER/OK button.
3. Press the ENTER/OK button again.
Press the ▲ or ▼ button to select "On", then press
ENTER/OK button.
If the PIP is activated, the size of the main picture turns to "16:9".
Mode
:Custom
Setup
Equalizer
More
SRS TS XT
:Off
Auto Volume
:Off
Energy
:Off
Internal Saving
Mute
:Off
HDMI
Black
Level
:Low
Reset
PIP
MoveEnter
TV
Move 







Return
Enter
Return
Mode
:Custom
PIP
Equalizer
PIP
::Off
On
SRS TS XT
Source
:TV
Auto
:Off
Size Volume
:
Internal Mute
:Off
Position
:
Reset
Programme
:P 1










4.
Press the ▲ or ▼ button to select "Source",then press ENTER/OK button. Select a source of the sub picture by pressing the ▲ or ▼ button and press the ENTER/OK button.
The sub picture can serve different source selections based on what the main picture is set to.
5.
Press the ▲ or ▼ button to select "Size" of the sub picture
Press the PIP button on the and then press the ENTER/OK button. Select a size of the
remote control repeatedly to actisub picture by pressing the ▲ or ▼ button and then press the vate or deactivate the "PIP".
ENTER/OK button.
If main picture is in "PC" and "Component" mode, "Size" is
not available.
MoveEnter
Move Return
Enter
Return
6. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.
Select the position of the sub picture by pressing the ▲ or ▼ button and then press the
ENTER/OK button.
7. Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the ▲ or ▼
button. Press the ENTER/OK button.
The "Programme" can be active when the sub picture is set to TV.
8. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
 Source: Used to select a source of the sub picture.
 Size: Used to select a size of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.
PIP Settings
O: PIP operates, X: PIP doesn’t operate
Main
Sub
Component
HDMI
PC
TV analog
O
O
O
Ext.1
O
O
O
Ext.2
O
O
O
AV
O
O
O
S-Video Component
X
X
X
X
X
X
HDMI
X
X
X
PC
X
X
X
TV digital
X
X
X
English - 20
BN68-01166E-Eng-0307.indd 20
2007-03-07 �� 11:42:17
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
TV
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
More
SRS TS XT
:Off
Auto Volume
:Off
Energy
:Off
Internal Saving
Mute
:Off
HDMI
ResetBlack Level:Low
PIP
2. Press the ▲ or ▼ button to select "HDMI Black Level", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Normal" or "Low", then press the ENTER/OK button.
Move
TV
4. Press the EXIT button to exit.
This Function is active only when the externel input connects HDMI(RGB siginal).
Move Enter
Enter
Return
Return
Mode
:Custom
Setup
Equalizer
More
SRS TS XT
:Off
Auto Volume
:Off
Energy
:Off
Internal Saving
Mute
:Off
Normal
HDMI
Black
Level
:Low
Reset
Low
PIP
:Off
 Normal: The screen gets brighter.
 Low: The screen gets darker.
Move
Move Enter
Enter













Return
Return
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
TV
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Mode".
3. Select the required sound effect by pressing the ▲ or ▼ button repeatedly and then press the ENTER/OK button.
4. Press the EXIT button to exit.
 Standard: Selects the normal sound mode.
 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.
 Custom: Selects your custom sound settings. (Refer to "Adjusting the Sound Settings")
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move TV
Enter






Return
Sound
Standard
Mode
:Custom
Music
Equalizer
Movie
SRS TS XT
:Off
Speech
Auto Volume
:Off
Custom
Internal Mute
:Off
Sound Select
:Main
Reset
Move Enter
Return
English - 21
BN68-01166E-Eng-0308.indd 21
2007-03-08 �� 9:12:19
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
TV
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER/OK button.
3. Press the ◄ or ► button to select a particular item.
Press the ENTER/OK button.
Move TV
Enter






Return
Equalizer
4. Press the ▲ or ▼ button to reach the required setting.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust
Return
Setting the TruSurround XT (SRS TS XT)
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
TV
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
Move TV
2. Press the ▲ or ▼ button to select "SRS TS XT", then press the ENTER/OK button.
Enter






Return
Sound
Mode
:Custom
Equalizer
Off
SRS TS XT
:Off
On
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
TruSurround XT, SRS and
symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
Move Enter
Return
You can also set these options simply by pressing the SRS
button on remote control.
English - 22
BN68-01166E-Eng-0307.indd 22
2007-03-07 �� 11:42:21
Connecting Headphones
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the
screen.
FM
Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
DUAL 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
You can also set these options simply by pressing the DUAL
button on remote control.
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
TV
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move TV
Enter






Return
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Off
On
Internal Mute
:Off
Sound Select
:Main
Reset
Move Enter
Return
English - 23
BN68-01166E-Eng-0307.indd 23
2007-03-07 �� 11:42:22
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
TV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2.Press the ▲ or ▼ button to select "Internal Mute", then press
the ENTER/OK button.
3.Press the ▲ or ▼ button to select "On" or "Off". Press the
ENTER/OK button.
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move TV
Enter






Return
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Off
Internal Mute
:Off
On
Sound Select
:
Reset
4. Press the EXIT button to exit.
When "Internal Mute" is set to "On", the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
Move Enter
Return
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound
of the sub picture.
TV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2.Press the ▲ or ▼ button to select "Sound Select", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sub".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
 Main : Used to listen to the sound of the main picture.
 Sub : Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move TV
Enter






Return
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Main
Sub
Reset
Move Enter
Return
English - 24
BN68-01166E-Eng-0307.indd 24
2007-03-07 �� 11:42:24
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
TV
Sound
Mode
:Custom 
Equalizer 
SRS TS XT
:Off 
Auto Volume
:Off 
Internal Mute
:Off 

Sound Select
:Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
Move Enter
Return
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Clock Set".
4.
To...
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time
Internal
Mute
:Off
Game Mode
:Off 

Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
Month
p
01
q
Hour
00
Move to Month, Day, Year, Hour or Minute  or  button.
Set the Month, Day, Year, Hour or Minute  or  button.
Press the ENTER/OK button.
Enter
Return
Clock Set
Press the...
5. Press the EXIT button to exit.
Move TV
Move Day
Year
01
2007
Minute
00
Adjust
Return
If you disconnect the power cord, you have to set the clock again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the remote control.
English - 25
BN68-01166E-Eng-0307.indd 25
2007-03-07 �� 11:42:25
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER/OK button.
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time

InternalMode
Mute
:Off 
Game
:Off
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
Move Enter
TV
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER/OK button.
Return
Time
Off
30
60
90
120
150
180
:
:
:
:
:
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Move Enter
Return
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
TV
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER/OK button.
4. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ► button to move to the next step.
Set other items using the same method as above.
Yes/ No
Press the ▲or▼ button
Repeat
Select a Once, Everyday,
Mon-Fri, Mon-Sat, SatSun
Press the ▲or▼ button
Volume
Adjust a 0~100
Press the ▲or▼ button
Programme
Adjust a Programme
Press the ▲or▼ button
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time
Internal
Mute
:Off

Game Mode
:Off 
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
TV
Move Enter
Return
Timer 1
On Time
5
00 :
6
Off Time
00 :
Repeat
Once
Programme
01
► Move 00
00
No
No
Volume
10
Adjust
Return
When finished, press the RETURN button to return.
• The current time will appear every time you press the INFO button.
•Y
ou can set the hour, minute, directly by pressing the number buttons on the remote control.
5. Press the EXIT button to exit.
English - 26
BN68-01166E-Eng-0307.indd 26
2007-03-07 �� 11:42:27
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
TV
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER/OK button.
You can choose one of 21 languages.
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time
Internal
Mute
:Off

Game Mode
:Off 
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
TV
4. Press the EXIT button to exit.
Move Enter
Return
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
SRS TS
XT
:Off 
Language
:English
English
Auto Volume
:Off
Time
Deutsch 
Internal
Mute
:Off
Game Mode
:Off
Français 
Reset
Blue
Screen
:Off
Italiano
Melody
:Off
Español
PC
Nederlands
Home Theater PC :Off
q
Light Effect
:Watching Mode On
MoveEnter
Return
More
Move Enter
Return
Using Game Mode
When connecting to a game console such as PlayStationTM or
XboxTM, you can enjoy a more realistic gaming experience by
selecting game menu.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 
Auto
Volume
:Off 

Time

InternalMode
Mute
:Off 
Game
:Off
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
TV
Move Enter
Return
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
SRS TS
XT
:Off 
Language
:English
Auto Volume
:Off 
Time
InternalMode
Mute
:Off
Game
:Off
Off 
Reset
Blue Screen
:Off
On
Melody
:Off
PC
Home Theater PC :Off
Light Effect
:Watching Mode On
MoveEnter
Return
More
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Move Enter
Return
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
English - 27
BN68-01166E-Eng-0307.indd 27
2007-03-07 �� 11:42:29
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you
must set the "Blue Screen" mode to "Off".
TV
Melody:
You can hear melody sound when the television is powered
on or off.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
TV
2. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".
Press the ENTER/OK button.
3.


Mode
:Custom 
Setup
Equalizer 
Plug
&
Play
SRS TS XT
:Off 
Language
:English
Auto Volume
:Off 
Time
InternalMode
Mute
:Off 
Game
:Off
Reset
Blue Screen
:Off
Off
Melody
:Off
On
PC
Home Theater PC :Off
Light Effect
:Watching Mode On
MoveEnter
Return
More
When you are satisfied with your setting,
press the ENTER/OK button.
Blue Screen: Off/On
Melody: Off/Low/Medium/High
Move Enter
Return
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
SRS TS
XT
:Off 
Language
:English
Auto Volume
:Off 
Time
InternalMode
Mute
:Off 
Game
:Off
Reset
Blue Screen
:Off
Melody
:Off
Off
PC
Low
Home Theater PC :Off
Medium
Mode On
Light Effect
:Watching
High
MoveEnter
Return
More
Move Enter
Return
4. Press the EXIT button to exit.
Setting the Home Theater PC
You can view higher quality pictures by configuring the
screen settings in PC Mode.
If you set the Home Theater PC function to On, you can
configure the Detail Settings (when Picture Mode is
set to Standard or Movie) as in PC Mode.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Home Theater PC".
Press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Off" or "On".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
This function is available only in PC mode.
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time

InternalMode
Mute
:Off 
Game
:Off
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
TV
Move Enter
Return
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
SRS TS
XT
:Off 
Language
:English
Auto Volume
:Off 
Time
InternalMode
Mute
:Off 
Game
:Off
Reset
Blue Screen
:Off
Melody
:Off
PC
Home Theater PC :Off
Off
Light Effect
:WatchingOn
Mode On
MoveEnter
Return
More
Move Enter
Return
English - 28
BN68-01166E-Eng-0307.indd 28
2007-03-07 �� 11:42:30
Setting the Light Effect
You can turn on/off the blue LED on the front of TV according
to the situation. Use it for saving power or when the LED
dazzles your eyes.
TV
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2.Press the ▲ or ▼ button to select "Light Effect", then press
the ENTER/OK button.
3. Select the required option (Off, Standby Mode On,
Watching Mode On, On) by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 
Auto
Volume
:Off 
Time


InternalMode
Mute
:Off 
Game
:Off
Reset
Blue
Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watching Mode On
MoveEnter
Return
More
TV
 Off: LED will not come on.
 Standby Mode On: Turns the LED on in standby mode.
 Watching Mode On: Turns the LED on while watching TV.
 On: LED will come on after you turn the TV off.
Move Enter
Return
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play
SRS TS XT
:Off 
Language
:English
Auto Volume
:Off 
Time
InternalMode
Mute
:Off 
Game
:Off
Reset
Blue Screen
:Off
Melody
:Off
PC
Off
Home Theater PC :Off
Standby Mode On
Light Effect
:Watching
WatchingMode
ModeOn
On
MoveEnter
More
On Return
Move Enter
Return
4. Press the EXIT button to exit.
[LE32R81, LE37R81, LE40R81,
LE32R83, LE37R83, LE40R83]
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
TV
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
MoveEnter
2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER/OK button.
3. Select the required option (Off, Low, Medium, High, Auto) by pressing the ▲ or ▼ button. Press the ENTER/OK button.
4. Press the EXIT button to exit.
Mode
:Custom
Setup
Equalizer
More
SRS TS XT
:Off
Auto Volume
:Off
Energy
Saving :Off
Internal
Mute
:Off
HDMI Black Level :Low
Reset
PIP
TV
Move Enter








Return
Return
Setup
More
Energy Saving :Off
Off
HDMI Black Level :Low
Low
PIP
Medium
High
Auto
Move Enter
Return
English - 29
BN68-01166E-Eng-0307.indd 29
2007-03-07 �� 11:42:32
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Source List".
When no external device is connected to your set, only "TV", "Ext.1", "Ext.2" are activated in the
"Source List". "AV", "S-Video", "Component", "PC",
"HDMI1", "HDMI2","HDMI3" are activated only
when they are connected to your set.
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TS XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
Reset
MoveEnter
TV
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Move Enter








Return
Return

Mode
:Custom
Source
List
Equalizer 
TV

SRS
TS
XT
:Off
Ext.1
:---Auto Volume
:Off 
Ext.2
:---Internal Mute
:Off 
AV
:---S-Video
:---Reset
Component
:---PC
:---HDMI1
:---HDMI2
:---HDMI3
:---MoveEnter
Return
Move Enter
Return
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number
buttons(0~9), and the P / button on the remote control.
But it cannot be selected using the SOURCE button.
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button.
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TS XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
Reset
2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER/OK button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
MoveEnter
TV
Move Enter








Return
Return

Mode
Edit:Custom
Name
Equalizer 
Ext.1
:------
SRS
TS
XT
:Off
Ext.2
:---- VCR
Auto Volume
:Off 
AV
:---DVD
Internal Mute
:Off
S-Video
:---D-VHS 
Component
:---Reset
Cable STB
PC
:---HDMI1
:----HD STB
Satellite STB
HDMI2
:---HDMI3
:---- q
MoveEnter
Move Enter
Return
Return
English - 30
BN68-01166E-Eng-0307.indd 30
2007-03-07 �� 11:42:35
Teletext Decoder
Most set channels carry " teletext ", pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
English - 31
BN68-01166E-Eng-0307.indd 31
2007-03-07 �� 11:42:35
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. Using the P ( ) or P
the teletext service.
(
) button, select the channel providing 2. Press the TEXT/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time
by pressing the MENU ( ) button.
3. Press the TEXT/MIX (
) button again.
The actual broadcast will be displayed with "Teletext", "Double",
and "Mix" in order on the screen.
4. Press the TV button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the Text language is identical with the language in the
"Setup" menu mode. If both languages are different, select the same language with the Text language on the "Setup" menu.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the
page number directly:
1.Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
2.If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the PIP ( ) . Press the PIP ( ) button
again to resume.
3. Using the various display options:
To display...
Press the...
Both teletext information and the normal broadcast
TEXT/MIX (
Hidden text (answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
)
A secondary page, by entering its 4-digit number
PRE-CH (
The next page
The previous page
P
P
Double-size letters in the:
 Upper half of the screen
 Lower half of the screen
SOURCE (
 Once
 Twice
Normal screen
 Three times
(
(
)
)
)
)
)
English - 32
BN68-01166E-Eng-0307.indd 32
2007-03-07 �� 11:42:37
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1. Display the teletext contents page by pressing the TEXT/MIX (
button.
)
2. Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV button to exit from the Text display.
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between
these modes, and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR, CABLE, DVD and STB
1. Turn off your VCR, CABLE, DVD and STB.
2.Press the VCR, CABLE, DVD and STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of
the VCR code listed on pages 34~36 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first digit is
a "0". (If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but
try one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
English - 33
BN68-01166E-Eng-0307.indd 33
2007-03-07 �� 11:42:37
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX
RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
020
002 025
002 005
007 008
020
073 074
021 056
019 041
008
021
021
019
015
017
018
021
006
025 038
018 026 037 062 064
075 076
071 072
075
056 059
080
026 039 053
049 055
056
018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
English - 34
BN68-01166E-Eng-0307.indd 34
2007-03-07 �� 11:42:38
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001
041
003 024
025 030
038 039
025 030
019 023
026
003 022
019 021
004 018
014 022
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
002 003 004 005 006 007
031
028
027 037 044
023 028
020 044
040
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE
AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA
ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
Code
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
English - 35
BN68-01166E-Eng-0307.indd 35
2007-03-07 �� 11:42:38
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
SAMSUNG SET-TOP BOX
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard
Code
001 002
003
004
008
009
Product
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
Code
010
011
012
013
014
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL
MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK
SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016 017 019 022 045 060 061 062
065 066 067 068
074
069 070
069
018
027
025
069
069
065
046
069
056
022
015
020
020
059
063
069
044
024 032
069 070 071
047 048 063 064
017
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
016 021
016
064
018
015
047 048
015 016
041 042
046 049
058 059
016
065 066
051 052
064
057
026
020 027
031
005 006
064
064
054 060
015 017
060 066
016 021
024 031
036 038 039 040 041 042
064
017 021 033 036 038 039 040
067
050 063
061 062
053 065 066
007
028 029 030 072
037 055 056 057
068
070
073
English - 36
BN68-01166E-Eng-0307.indd 36
2007-03-07 �� 11:42:39
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are
supported)
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640×350
720×400
640×480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+/-/+
-/-
VESA
640×480
640×480
640×480
800×600
800×600
800×600
800×600
1024×768
1024×768
1024×768
1024×768
1360×768
1152×864
37.861
37.500
43.269
37.879
48.077
46.875
53.674
48.363
56.476
68.677
60.023
47.712
53.783
72.809
75.000
85.008
60.317
72.188
75.000
85.061
60.004
70.069
84.997
75.029
60.015
59.959
31.500
31.500
36.000
40.000
50.000
49.500
56.250
65.000
75.000
94.500
78.750
85.800
81.750
-/-/-/+/+
+/+
+/+
+/+
-/-/+/+
+ /+
+/+
-/+
640×480
800×600
1024×768
35.000
43.750
57.672
70.000
70.000
72.000
28.560
45.500
78.434
-/+
-/+
-/-
Horizontal
Frequency (kHz)
31.469
31.469
31.469
37.879
48.364
47.712
Vertical
Frequency (Hz)
70.086
70.087
59.940
60.317
60.000
60.015
Pixel Clock
Frequency (MHz)
25.175
28.322
25.175
40.000
65.000
85.800
Sync Polarity
(H/V)
+/-/+
-/+/+
-/+/+
VESA GTF
HDMI/DVI Input
Mode
IBM
VESA
Resolution
640×350
720×400
640×480
800×600
1024×768
1360×768
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 37
BN68-01166E-Eng-0307.indd 37
2007-03-07 �� 11:42:39
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
TV
Mode
:Custom 
Image Lock

Equalizer
SRS TS XT
:Off 
Coarse50
Auto Volume
:Off 
Fine50
Internal Mute
:Off 
Reset
MoveEnter
1. Preset: Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Move Enter
Return
Return
3. Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button.
4. Press the ENTER/OK button to select "Image Lock".
5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button.
6. Press the ◄ or ► button to adjust the screen quality.
Press the ENTER/OK button.
7. Press the EXIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the TV
screen.
TV
Position
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER/OK button.
Move Enter
Return
4. Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
TV
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
PC
Image Lock
Position
Auto Adjustment
Image Reset




2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER/OK button.
3. Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
TV
Move Enter
Return
PC
Image Lock
Position
Auto Adjustment
Image Reset




2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER/OK button.
3. Press the EXIT button to exit.
Move Enter
Return
English - 38
BN68-01166E-Eng-0307.indd 38
2007-03-07 �� 11:42:41
Wall-Mount Adjustment (LE40R8) (Sold separately)
Once the wall mount is installed, the position of your TV can
be easily adjustable.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER/OK button.
2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,
then press the ENTER/OK button.
3. Adjust to the desired position using the ▲,▼,◄,► buttons.
4. Press the EXIT button to exit.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
(When watching analog broadcasting) If you press an arrow
button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
(When watching digital broadcasting) If you press the ENTER/
OK button for three seconds when no OSD is displayed on the TV screen, the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
Setup
Plug & Play 
Language
:English 
Time 
Game Mode
:Off 
Blue Screen
:Off 
Melody
:Off 
PC 
Home Theater PC :Off 
Light Effect
:Watchung Mode On 
More
TV
Move Enter
Return
Mode
:Custom
Setup
Equalizer
More
SRS TS XT
:Off
Wall-Mount Adjustment
Auto
Volume
:Off
Energy
Saving :Off
Internal
Mute
:Off
HDMI
Black
Level :Low
Reset
PIP
MoveEnter
Move 








Return
Enter
Return
Wall Mount Adjusment
Position1
Position Adjust 1 2 3
CenterExit
INFO
Using the Remote Control Buttons
Button
Operations
Wall-mount angle
adjustment
Tilt Up, Tilt Down, Move right, Move left
Reset
Moves to the initial installation position
Remembering the
position and moving
to the remembered
position
Remembers 3 positions with the Red, Green and
Yellow buttons.
Moves to the remembered position using these 3
color buttons.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
English - 39
BN68-01166E-Eng-0307.indd 39
2007-03-07 �� 11:42:43
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
TV
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
HDMI Cable
HDMI Cable
Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT jack
of the corresponding Anynet+
device using the HDMI cable.
HDMI Cable
To connect to Home Theater
TV
Anynet+ Device 1
HDMI Cable
Home Theater
HDMI Cable
Anynet+ Device 2
HDMI Cable
Anynet+ Device 3
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
HDMI Cable
➣
➣
➣
➣
Connect only one receiver.
You can connect an Anynet+ device using the HDMI Cable. Some HDMI cables may not support Anynet+
functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 40
BN68-01166E-Eng-0308.indd 40
2007-03-08 �� 3:11:31
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
View TV
1. Press the Anynet+ button.
Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC),
then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select On, then press the ENTER/
OK button.
➣
➣
➣
Air 28
The Anynet+ (HDMI-CEC) function is enabled.
If you select Off, Anynet+ (HDMI-CEC) is disabled.
When the Anynet+ (HDMI-CEC) function is disabled, all the
Anynet+ related operations are deactivated.
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move
Exit

Enter
Setup
Anynet+ (HDMI-CEC)
: OffOff
Auto Turn Off : OffOn
Searching Connections
Move
Enter
Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select Auto Turn Off, then press
Setup
the ENTER/OK button.
Anynet+ (HDMI-CEC)
: On
2. Press the ▲ or ▼ button to select On, then press the ENTER/
Auto Turn Off : Off
OK button.
Off
➣
➣
➣
➣
The Auto turn off function is enabled.
If you select Off, the Auto turn off function is canceled.
Press the EXIT button to exit.
Searching Connections
Move
On
Enter
Return
The Select Device setting of the TV remote control is to be set to
TV to use the Anynet+ function.
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1. Press the Anynet+ button.
2. Press the ▲ or ▼ button to select Select Device, then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select to a particular device and
press the ENTER/OK button.
It is switched to the selected device.
4. If you cannot find a device you want, press the ▲ or ▼ button
to select Searching Connections, then press the ENTER/OK
button.
The meassage Configuring Anynet+ connection... is
displayed. When searching devices completes, the connected
devices are listed in the Anynet+ menu.
➣
➣
➣
➣
➣
Air 28
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move
Return
DVDR1
DVDR2
DVD1
DVD2

Enter
Setup
Switching to the selected devices may take up to 2 minutes. You
Anynet+ (HDMI-CEC)
: On

cannot cancel the operation during the switching operation.
: On

The time required to scan for devices is determined by the number Auto Turn Off of connected devices.
Searching Connections 
When the device scan is complete, the number of found devices
is not displayed.
Move
Enter
Return
Although the TV automatically scans devices when it is turned on
using the POWER button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select Searching Connections menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
function. Make sure to switch to an Anynet+ device by using the Anynet+ button.
English - 41
BN68-01166E-Eng-0307.indd 41
2007-03-07 �� 11:42:44
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
Device with built-in Tuner
After switching to the device,
when you are watching a TV
program
Audio Device
When Receiver is activated
Anyview2
When watching TV
➣
➣
➣
➣
➣
➣
➣
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER/OK buttons
Color buttons
EXIT button
◄◄(Backward search)
►►(Forward search)
(Stop)
► (Play/Pause)
CH ▲/▼ button
VOL +/- button
MUTE button
► (Play/Pause)
The Anynet+ function only works when the remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the color buttons may not work properly.
The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
➣
➣
The current TV program is recorded in the Watching TV status. If you are watching video from another
device, the video from the device is recorded.
You can also record the source streams by selecting Record after pressing the Anynet+ button.
Before recording, check whether the antenna jack is properly connected to the recording device. For the
antenna connection to the recording device, refer to its user manual.
English - 42
BN68-01166E-Eng-0307.indd 42
2007-03-07 �� 11:42:44
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the Anynet+ button.
Air 28
Press the ▲ or ▼ button to select Receiver, then press the
View TV
ENTER/OK button.
Select Device
2. Press the ◄ or ► button to select to On, then press the
Record
ENTER/OK button.
Menu on Device
Now you can listen to sound through the receiver.
Device Operation
3. Press the EXIT button to exit.
Receiver :On
➣
➣
➣
➣





When the receiver is set to On, you can listen to the TV sound
Setup

through the 2-channel receiver.
Move
Enter
Exit
If the receiver is exclusively for a home theater only (supporting
audio only), it may not appear in the device list.
In case of a content with copyright problem, listening through the receiver may not properly operate.
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
I want to start
Anynet+.
Solution
■
■
■
■
■
■
■
■
■
■
■
■
I want to exit Anynet+. ■
■
■
The Connecting to
Anynet+ device…
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV program
cannot be recorded.
■
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI Cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels)
When connecting or removing the HDMI Cable, please make sure to search
devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the
Anynet+ button to show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
Press any of CH, CH LIST, PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI Cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI Cable only. Some HDMI
cables may not support Anynet+ functions.
Check whether the antenna jack on the recording device is properly connected.
English - 43
BN68-01166E-Eng-0308.indd 43
2007-03-08 �� 3:11:31
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with
the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a
desk or a heavy stationary object.
Cable
Figure 2
Figure 1
<Optional>
The place of the Kensington Lock may be
different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the POWER buttons on the front of the set.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no
sound
 Check the volume.
 Check whether the MUTE button has been pressed on the remote control.
 Check if "Internal Mute" is off
No picture or black and
white picture
 Adjust the colour settings.
 Check that the broadcast system selected is correct.
Sound and picture
interference
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
 Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the battery terminals.
"Check signal cable."
message is displayed.
 Check that the signal cable is firmly connected to the PC or video sources.
 Check that the PC or video sources are turned on.
On PC mode, "Not Supported  Check the maximum resolution and the frequency of the video adaptor.
Mode." message is displayed.  Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
English - 44
BN68-01166E-Eng-0307.indd 44
2007-03-07 �� 11:42:45
Technical and Environmental Specifications
Model Name
LE32R8
LE37R8
LE40R8
Screen Size (Diagonal)
32 inch
37 inch
40 inch
Power Consumption
150 W
170 W
190 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
10 W x 2
10 W x 2
10 W x 2
874 x 81 x 531 mm
874 x 291 x 577 mm
1013 x 93 x 602 mm
1013 x 300 x 652 mm
1084 x 95 x 639 mm
1084 x 300 x 690 mm
15 kg
21 kg
22 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
English - 45
BN68-01166E-Eng-0307.indd 45
2007-03-07 �� 11:42:46
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside.
It is dangerous to make any kind of contact
with any internal part of this product.
This symbol alerts you that important
literature concerning operation and maintenance has been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper venti
lation is provided.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.).
If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.
• To cut off the power source, unplug this apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor correspondsto the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
• Locate this apparatus near an easily accessible AC outlet.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Unplug this apparatus from the AC outlet before any service.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for
an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to
generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.
BN68-01166E-Eng-0307.indd 46
2007-03-07 �� 11:42:46
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available
from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a
power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do
NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against
defective materials and workmanship. In the event that warranty service is required, you should return the
product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the
country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd.
Customer Care Centre
PO Box 17243
Edinburgh, EH11 4YB
United Kingdom
Tel: 0870 SAMSUNG (7267864)(UK & Northern Ireland)
Tel: 0818 717 100 (Republic of Ireland Only)
Fax: +44 (0)870 7221127
Web : www.samsung.com/uk
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly
completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires
adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
BN68-01166E-Eng-0307.indd 47
2007-03-07 �� 11:42:47
This page is intentionally
left blank.
BN68-01166E-Eng-0307.indd 48
2007-03-07 �� 11:42:47
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
BN68-01166E-Eng-0308.indd 49
2007-03-08 �� 10:58:23
Download PDF

advertising