Samsung | CS21A750JL | Samsung CS29B850F6 User manual

COLOUR TELEVISION
CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57
CS29Z58 / CS29A730 / CS29A760 /
CS29A750
Connection Panel (depending on the model)
actual configuration of your TV may be different,
➢ The
depending on your model.
Rear Panel
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
or
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video
game device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a
DVD with component output.
Front (or Side) Panel
cable television
network
Control Panel (depending on the model)
1 S-Video input
actual configuration of your TV may be different,
➢ The
depending on your model.
2 Video input
COMPONENT IN
AV IN / OUT
VIDEO L - AUDIO - R
Front (or Side) Panel
(480i/480p/576i/576p/�
720p/080i/080p)
OUT
Y
IN 2
PB
IN PR
3 Audio input
or
cable television
network
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Standby indicator
Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
and cable jacks.
☛ Whenever you connect an audio or video system to your
Connecting to the RCA Input
The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the S-Video Input
The 1 (S-VIDEO input) and 2 (VIDEO input) connectors
are used for equipment with an S-Video output, such as a
camcorder or VCR.
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
English - AA68-03967L-00Eng_0702.indd 1
☛ Please be sure to match the colour coded input terminals
both the front (or side) AV and rear connectors are
➢ When
connected to external equipment, the front (or side) AV
receives priority.
AA68-03967L-00
2008-07-02 오후 5:58:21
2
1
Remote Control (depending on the model)
/ 4
Used to increase or
decrease the volume.
5MENU
Used to display the onscreen menu or return
to the previous menu.
6▲/▼/◄/►
Used to control the
cursor in the menu.
7S.MENU
Used to display the
sound menu.
8TURBO
Used to select the turbo
sound option.
9DUAL I-II
Used to select the
sound mode.
0SOURCE
Used to display all of
the available video
sources.
!INFO
Used to view the
channel information
and setting status you
selected.
@PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
#P / Used to display the
of remote control may be affected by bright
➢ Operation
artificial light near to the TV.
-/--
MUTE
LNA
next or previous stored
channel.
$EXIT
Used to exit from any
display or return to
normal viewing.
%MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
, or
button.
^ENTER
While using the onscreen menus, press
the ENTER button to
activate (or change) a
particular item.
&S.MODE
Used to select the
sound effect.
*P.MODE
Used to select the
picture effect.
(TV
Used to return to the
TV mode when it is in
external input mode.
)EZ.VIEW
Used to display
Channel Grouping,
Channel Minimizer,
Channel Schedule,
Music Mode, Half Mute
menu.
3-/--
Used to select a
channel numbered ten
or over.
Press this button, then “--” symbol is displayed.
Enter the two-digit
channel number.
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
➢
2
Press the “I” button (On/Off) on the front (or side) of the
television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 3.
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
➢
4
To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2
To switch the television back on, simply press it again.
☛ Do not leave the television in standby mode for long
Installing Batteries
1 POWER
Used to switch the TV
on and off.
2 Numeric buttons
Used to select channels
directly.
Switching the Television On and Off
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the
“+” and “-” ends of the batteries are
inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.
➢
English - AA68-03967L-00Eng_0702.indd 2
2008-07-02 오후 5:58:22
Viewing the Menus
1
2
3
4
5
Channel - Auto Store
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
Press the ▲/▼/◄/► button to change the selected
items. Press the MENU button to return to the previous
menu.
Press the EXIT button to exit from the menu.
If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play is
displayed. To start Plug
& Play, press the ENTER
button. The Language
menu is displayed.
The Language menu
will automatically appear
after several seconds,
even if the ENTER
button is not pressed.
➢
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
continued...
Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
Plug & Play
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P 1 C--102MHz
7%
Stop
Enter
When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Skip
Plug & Play
Clock Set
11 : 0 0 am
Move
Adjust
Enter
Skip
Enjoy your watching.
OK
Plug & Play
Start Plug & Play.
OK
Enter
Return
Plug & Play
Language
English
Indonesia
Melayu
Move
Enter
Skip
Select the appropriated
Plug & Play
language by pressing the
Check antenna input.
▲ or ▼ button. Press the
OK
ENTER button. The Check
Enter
Skip
antenna input. is displayed.
If any language is not selected, the language menu
will disappear about 30 seconds later.
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
6
7
➢
3
5
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
2
Press the ▲ or ▼ button to select your area. Press the
ENTER button.
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
Setup - Plug & Play
1
4
Plug & Play
Area
Asia/W.Europe
South Africa
CIS/E.Europe
America
China
Hong Kong/UK
Australia
NZL/Indonesia
Move
Enter
Skip
Re-setting the Plug & Play
Method:
MENU ➜ ▲/▼ (Setup) ➜
ENTER ➜ ▲/▼ (Plug & Play)
➜ ENTER
Setup
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen
: On
Melody
: On
Music Mode
: Off
Move
Enter







Return
Input (depending on the model) -
Source List
Source List
TV
◆ Source List
TV
You can switch between
AV1
AV2
viewing signal from
S-Video
Component
connected equipment,
such as a VCR, DVD, settop box, and the TV source
Move
Enter
Return
(broadcast or cable).
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
➢
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
To stop the search before
it has finished, press the
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
“Channel - Sort”. To exit without
sorting, press the EXIT button.
Auto Store
TV
Area
Search
➢
Move
: Belgie
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Enter
Return
Search
P 1 C-- 102MHz
7%
Stop
Enter
Return
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
Sort
TV
From
To
Store
:P1
: P-: ?
Adjust
Move
Return
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Manual Store
Manual Store
TV You can store channels,
Programme
: P 3
including those received via
Colour System : AUTO

cable networks. When storing
Sound System : BG

Search
: 46MHz
channels manually, you can
Channel
:C4
choose:
Store
: ?
-
Whether or not to store each
Adjust
Move
Return
of the channels found.
-
The programme number of
each stored channel which you wish to identify.
continued...
English - AA68-03967L-00Eng_0702.indd 3
2008-07-02 오후 5:58:26
Channel - Fine Tune
◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored):
You can also select the channel number directly by
pressing the numeric buttons (0-9).
◆ Store (When you store the channel and associated
programme number)
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel mode
(Programme mode): When completing tuning,
◆ P
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
(Real channel mode): You can select a channel
◆ C
by entering the assigned number for each air
broadcasting station in this mode.
(Cable channel mode): You can select a channel
◆ S
by entering the assigned number for each cable
channel in this mode.
➢
➢
☛
Channel - Channel Grouping
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Method:
▲/▼ : Used to select a
Programme.
◄/► : Used to select the desired
channel group.
▲/▼ : Used to confirm the new
choice.
Channel Grouping
TV
Group Select
: Sport
Set Channel Group
Move
P1
P2
P3
P4
P5
P6
P7
P8
Adjust


Return
Set Channel Group
Movie Music News Sport User
Move
Adjust
Return
You can press  to select Channel Group(All, Movie,
➢ Music,
News, Sport, User) directly.
➢ You can also use the EZ.view key to use this function.
Channel - Add/Delete
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to
skip are not displayed. All of
the channels that you did not
specifically choose to skip are
displayed during scanning.
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
Fine Tune
◄/►: You can obtain a sharp
P 1
0
and clear picture and good
sound quality.
Reset
▲/▼ ➜ ENTER : You can reset
Move
Save
Adjust
Return
the setting.
MENU : You can memorise
adjusted picture or sound.
Add/Delete
TV
Method:
ENTER : Select Added or Deleted.
 More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
 More
Move
Enter
Return
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
◆ Scheduler
Scheduler
You can set the scheduler TV
P On Time Off Time Set
to make the TV return to 1. -- -- : -- am -- : -- am No
2. -- -- : -- am -- : -- am No
a particular channel at a 3. -- -- : -- am -- : -- am No
4. -- -- : -- am -- : -- am No
pre-set time.
5. -- -- : -- am -- : -- am No
On Timer Volume10
Upto
5
Programmes
can
Move
Enter
Return
be scheduled at a time.
If
the
Clock
is
not
set
in
the
Time
menu,
a
pop-up
warning will flash if user tries to enter Scheduler.
◆ On Timer Volume
Ther preferred volume can be set for when the timer
automatically turns on the TV.
➢
➢
Method:
◄/► : Move to the hour, minute or am/pm.
▲/▼ : Used to set hour, minute or am/pm.
▲/▼, ENTER : Set option of YES/NO to activate/deactivate
the operation.
☛ The function can be used to the preset channel only.
☛ Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating, which may
occur if a TV is on for too long.
Setup - Time
Setup - Child Lock
Time
TV
◆ Clock
11 : 0 0 a m
Clock
You can set the television
Sleep Timer
: Off
Scheduler

clock so that the current
time is displayed when
pressing the INFO button on
the remote control.
Move
Enter
Return
You must also set the time if
you wish to use the automatic on or off timers.
When pressing the “I” button (On/Off) on the front (or
side) of the television, the clock setting will be reset.
continued...
Child Lock
TV
This feature allows you to
Child Lock
: On

prevent unauthorized users,
Programme
:P1
such as children, from watching
Lock
: ?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
Move
Enter
Return
using front (or side) panel
buttons. Only remote control can
release the Child Lock setting, so keep the remote control
away from children.
➢
continued...
English - AA68-03967L-00Eng_0702.indd 4
2008-07-02 오후 5:58:27
◆
◆
◆
Child Lock: On/Off
If you want to unlock a channel, set to Off.
Programme: Channel number to be locked.
Lock: When press the ENTER button, the Locked is
displayed.
any channel is locked, you can not access to the
➢ IfChannel
and Child Lock menu by using the control
buttons on the TV panel (the Not available is
displayed in the Child Lock menu). You can access by
using the remote control only.
Setup - Language / Blue Screen / Melody / Music Mode
◆ Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select
the language which will be
used for displaying menus
and indications.
Plug & Play
Language
: English
Time
Child Lock
Blue Screen : On
Melody
: On
Music Mode : Off
Move
Enter
Picture - PIP (depending on the model)
Mode
◆ Mode: Dynamic/ Standard/ TV
Mode
: Dynamic

Movie/Custom
Contrast
:100
Brightness
:
50
You can select the type
Sharpness
:
75
Colour
:
50
of picture which best
Tint
: G 50
R 50
corresponds to your viewing
Colour Tone : Cool1

Reset

requirements.
Move
Adjust
Return
➢ You can select these
options simply by pressing the P.MODE button on
the remote control.
You can display a sub picture within the main picture of
TVprogramme or external A/V devices such as VCR or
DVD. Inthis way you can watch TV program or monitor the
videoinput from any connected devices while watching TV or
othervideo input.
◆ Contrast/Brightness/Sharpness/Colour/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.







Exit
◆ Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
◆ Melody
You can hear melody sound when the television is
powered on or off.
◆ Music Mode
You can listen to the music/audio with no video or visual
distraction.
Music Mode is selected, only music is audible
When
and no picture is visible.
Picture
TV
Mode
: Dynamic
Size
: Normal
Digital NR
: Off
DNIe Jr
: Off
PIP
Move
Enter
PIP
TV





Return
PIP
: On
Source
: TV
Swap
Size
: Large
Position
:
Programme : P 1
Move
Enter





Return
◆ PIP: On/Off
You can activate or deactivate the PIPfuntion. 1
◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
◆ Source You can select a source of the sub-picture. 2
on the models, the sub-picture can
➢ Depending
beviewed only when a source different from the
mainpicture's is selected. If a TV programme is
viewedon the main picture, the sub-picture is not
availablefor TV programmes. If a TV source is
selected, themessage Not availableis displayed.
Picture - Digital NR
◆ Swap
You can interchange the main picture and sub-picture.3
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/ Warm2
Setup
TV
Picture - Mode
◆ Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear
on the screen.
Picture
TV
Mode
: Dynamic
Size
: Normal
Digital NR
: Off
DNIe Jr
: Off
PIP
Move
Enter





Exit
◆ DNIe Jr
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
◆ Size: Small/Large
You can select a size of the sub-picture.
◆ Position: / / /
You can select a position of the sub-picture.
◆ Programme
You can select a channel of the sub-picture only
whenthe Sourceis set to TV.
Easy functions of the remote control
You can freeze the sub-picture.
➢
Method:
ENTER : On/Off
English - AA68-03967L-00Eng_0702.indd 5
2008-07-02 오후 5:58:28
Sound - Mode / Equalizer / Auto Volume/ Pseudo Stereo / Turbo Plus / Half Mute
Sound
TV
◆ Mode: Standard / Music /
Mode
: Standard

Movie / Speech / Custom
Equalizer

You can select the type of
Auto Volume
: Off

Pseudo Stereo
: Off

special sound effect to be
Turbo Plus
: Off

Half Mute
: On
used when watching a given

broadcast.
Move
Enter
Exit
You can select these
options simply by
pressing the S.MODE button on the remote control.
➢
Selecting the Sound Mode
Easy View - Channel Minimizer
(depending on the model)
The DUAL I-II button displays/
controls the processing and
output of the audio signal. When
power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending
on the current transmission.
◆ NICAM Stereo
Type of broadcast
On-screen indication
Mono
(Normal use)
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
Mono
NICAM
↔
Mono
(Normal)
◆ Auto Volume
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
NICAM Stereo
Stereo
NICAM
↔
Mono
(Normal)
➢
NICAM Dual-I/II
◆ A2 Stereo
◆ Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo Stereo
is set to On or Off, these settings apply to the sound
effects such as Standard, Music, Movie, and Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
You can change the options simply by pressing the
TURBO button on the remote control.
➢
◆ Half Mute
You can reduce volume to half and control volume even
in the mute mode.
Method:
ENTER : On/Off
Dual-I
Dual-II
Mono
NICAM ↔ NICAM ↔ (Normal)
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal)
Bilingual or Dual-I/II
Stereo
➢
Dual-I
Stereo
↔
↔
Easy view is a combination of
Video&Audio features that make
TV viewing much easier.
Channel minimizer is a feature
that offers freedom in the
number of channels that you can
watch at any time!
To add a Channel
You can go to your favorite
channel you wish to add to
Channel Minimizer.
Easy View
Channel Grouping
Channel Minimizer
Channel Scheduler
Music Mode
Half Mute
Move
Enter
►
►
►
►
►
Exit
Scroll
Select
▼ Delete
P14
P20
Scroll
P35
Select
▼ Delete
Method:
▲ : Add the present channel to Channel Minimizer.
Repeat the process to add upto six channels.
➢
To delete a Channel
You can delete the channel in Channel Minimizer by
pressing▼ button.
can display Channel Minimizer menu by pressing
➢ You
◄/►/▲ button.
cannot display Channel Minimizer menu by
➢ You
pressing ▲ button when six channels are added.
Minimizer is always activated hence you don’t
➢ Channel
to press
need
Easy view button.
Dual-II
Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will
be easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
continued...
English - AA68-03967L-00Eng_0702.indd 6
2008-07-02 오후 5:58:29
2
Teletext Feature (depending on the model)
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
☛ For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
1
1
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow
on automatically. To resume, press it again.
2
(index)
Used to1display the index (contents) page at any time
while you are viewing teletext.
2
3 Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are colour-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding
to the required. The page is displayed with other
coloured information that can be selected in the same
way. To display the previous or next page, press the
corresponding coloured button.
2
(size)
Press to display the double-size letters in the upper half
2 lower half
1 of the screen, press it again.
of the screen. For
-/-To display normal screen, press it once again.
4
5
6
7
LNA
8
1
(teletext on/mix)
Press to activate teletext mode after selecting the
2 Press it again to
channel
providing the teletext service.
MUTE
overlap the teletext with the current broadcasting screen.
1
(sub-page)
Used to display the2 available sub-page.
(mode)
1
2 select the teletext mode (LIST/FLOF). If you
Press to
press it in the LIST mode, it switches into the List save
2 mode, you can save teletext page
mode. 1In the List save
2
into list using the
(store) button.
1
(reveal)
1
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
9
(page up)
2
Used to display the next teletext page.
0
(page down)
1
Used to display the previous teletext page.
!
(cancel)
Used to display the broadcast when searching for a page.
@
(store)
Used to store the teletext pages.
Troubleshooting
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the “I” button (On/Off)
and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is
affecting the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of
your aerial. This interference often occurs due to the
use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
2
1
AA68-03967L-00Eng_0702.indd 7
English - 2008-07-02 오후 5:58:31
OSD Map
Input
✽ : It is variable depending on the model.
-Source List ✽
Picture
-Mode
- Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Colour
Tint (NTSC only)
Colour Tone - Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset
-Size
- Normal / Zoom
-Digital NR
- Off / On
-DNIe Jr
- Off / On
-PIP✽
- PIP
- Off / On
- Source ✽
- Swap
- Size
- Position
- Programme
Sound
-Mode
-Equalizer
-Auto Volume
-Pseudo Stereo
-Turbo Plus
-Half Mute - Standard / Music / Movie / Speech / Custom
- Off / On
- Off / On
- Off / On
- Off / On
Channel
- Asia/W.Europe / CIS/E.Europe / China / Hong Kong/UK /
-Auto Store
- Area ✽ Australia / NZL/Indonesia / South Africa / America
- Search
-Manual Store
- Programme
- Colour System ✽ - AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58
- Sound System ✽ - BG / DK / I / M
- Search
- Channel
- Store
-Add/Delete
-Fine Tune
-Sort
-Channel Grouping - Group Select
- Set Channel Group
Setup
-Plug & Play
-Language ✽
-Time
-Child Lock
-Blue Screen
-Melody
-Music Mode
- Clock
- Sleep Timer
- Scheduler
- Child Lock
- Programme
- Lock
- Off / On
- Off / On
- Off / On
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect
ratio of the screen width to height) are primarily
designed to view standard format full-motion video. The images displayed on them should primarily be in
the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than
15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio
of the screen width to height) are primarily designed
to view wide screen format full-motion video. The
images displayed on them should primarily be in the
wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly
moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded
standard format television video and programming,
should be limited to no more than 15% of the total
television viewing per week.
Additionally, viewing other stationary images and text
such as stock market reports, video game displays,
station logos, web sites or computer graphics and
patterns, should be limited as described above for
all televisions. Displaying any stationary images
that exceed the above guidelines can cause uneven
aging of picture tubes (CRTs) that leave subtle, but
permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and
images, and primarily display full screen moving
images, not stationary patterns or dark bars. On television models that offer picture sizing features,
use these controls to view the different formats as a
full screen picture.
Be careful in the selection and duration of television
formats used for viewing. Uneven CRT aging as a
result of format selection and use, as well as other
burned-in images, is not covered by your Samsung
limited warranty.
English - AA68-03967L-00Eng_0702.indd 8
2008-07-02 오후 5:58:32
Download PDF

advertising