Samsung | AS18P0GEA/XST | Samsung AS18P0GEA/XST User manual

US14P4GB
US18P0GBA
US18P0GEA
SC18AP0X
SC18ZP0BX
US24P6GBA
US24P6GEA
SC24AP6X
SC24ZP6BX
ENGLISH
ESPAÑOL
E§§HNIKA
Split-type Room Air Conditioner (Cool)
Aire acondicionado doméstico sistema Split (Refrigeración)
Climatiseur de type Séparé (Refroidissement)
Condizionatore d’aria per ambienti ad unità Separate (Raffreddamento)
Aparelho de ar condicionado tipo Split (Refrigeração)
Geteilte raumklimaanlage (Kühlen)
¢IAIPOYMENO K§IMATI™TIKO ¢øMATIOY (æ‡Í˘)
FRANÇAIS
US07P2GE
SC07APGX
SC07APGAX
SC07ZP2X
SC07ZP2AX
US09P2GB
US09P2GE
SC09APGX
SC09ZP2X
SC09ZP2AX
US12P4GB
US12P4GE
SC12APGX
SC12ZP4X
SC12ZP4AX
AS14P4GB
AS18P0GBA
AS18P0GEA
SC18AP0
SC18ZP0B
AS24P6GBA
AS24P6GEA
SC24AP6
SC24ZP6B
ITALIANO
Outdoor unit
AS07P2GE
SC07APG
SC07APGA
SC07ZP2
SC07ZP2A
AS09P2GB
AS09P2GE
SC09APG
SC09ZP2
SC09ZP2A
AS12P4GB
AS12P4GE
SC12APG
SC12ZP4
SC12ZP4A
PORTUGUÊS
Indoor unit
DEUTSCH
OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
ISTRUZIONI PER L’USO
MANUAL DE INSTRUÇÕES
GEBRAUCHSANWEISUNG
√¢∏°π∂™ Ã∏™∆∏
E S F I P D G DB98-16152A(2)
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
DURING
OPERATION
Risk of electric shock. Can cause injury or death. • Disconnect all
remote electric power supplies before servicing, installing or cleaning.
• This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
◆ Users of this product are cautioned not to attempt repair of this product
at their own discretion. Instead, they are requested to directly contact a
designated service center or the outlet at which the product was
purchased.
◆ Never spill any kind of liquid into the unit. Should this happen, unplug
or main switch off the unit and contact an authorized service center.
◆ Do not insert anything between the air outlet blades because the inner
fan may be damaged and could cause injury. Keep children away from
the unit.
◆ Do not place any obstacles in front of the unit.
◆ Do not spray liquid of any kind into the indoor unit. Should this happen,
switch off the breaker used for your air conditioner and contact your
installation specialist.
◆ Make sure that the unit is correctly ventilated at all times:
Do not place clothing or other materials over it.
◆ If the wireless remote control will not be used for a long time, remove
the batteries. (If applicable)
◆ When using a wireless remote control, the distance should not be more
than 7 meters from the air conditioner. (If applicable)
DISPOSING OF THE UNIT
◆ Before throwing out the device, it is necessary to pull back the battery
cells and get rid of them safely for recycling reasons.
◆ When you need to dispose of the unit, consult your dealer. If pipes are
removed incorrectly, refrigerant may blow out and come into contact
with your skin, causing injury. Releasing refrigerant into the atmosphere
also damages the environments.
◆ Please recycle or dispose of the packaging material for this product in
an environmentally responsible manner.
OTHERS
◆ Never store or ship the air conditioner upside down or sideways to
avoid damage to the compressor.
◆ The appliance is not intended for use by young children or infirm
persons without supervision: Young children should be supervised to
ensure that they do not play with the appliance.
◆ Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
E-2
ENGLISH
Contents
◆ PREPARING YOUR AIR CONDITIONER
■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .
■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
◆ OPERATING YOUR AIR CONDITIONER
■ Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . .
■ Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . .
■ Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Generating Anion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . .
■ Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . .
9
10
11
12
13
14
15
16
17
◆ PROGRAMMING YOUR AIR CONDITIONER
■ Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
■ Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
◆ RECOMMENDATIONS FOR USE
■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . .
■ Operating Your Air Conditioner Without the Remote Control . . . . .
■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Cleaning Deodorizing and Bio-Green Filters (option) . . . . . . . . . .
21
22
22
23
24
25
E-3
View of the Unit
The design and shape are subject to change according to the model.
Indoor Unit
Air Inlet
Auto grille
Room temperature sensor
On/Off switch
Air filter
(under the grille)
Remote Control Sensor
Air flow blades
(outlet)
Operation indicator
Timer indicator
Set temperature &
Room temperature
Sleep Timer indicator
Anion indicator
Fan speed setting
Note
E-4
◆ If you want to turn on/off the display during operation,
press the
button on the remote control.
◆ The room temperature sensor senses air temperature
around the sensor, and shows the temperature on the
display.
ENGLISH
Outdoor Unit
US07P2GE
US09P2GB
US12P4GB
SC07ZP2X
US09P2GE
US12P4GE
SC07ZP2AX
SC09ZP2X
SC12ZP4X
SC09ZP2AX
SC12ZP4AX
US14P4GB
Air Inlet(Rear)
Air Outlet
Connection Valve
Outdoor Unit
SC07APGX
SC07APGAX SC09APGX
SC12APGX
Air Inlet(Rear)
Air Outlet
Connection Valve
(inside)
Outdoor Unit
US18P0GBA
US24P6GBA
US18P0GEA
US24P6GEA
SC18AP0X
SC24AP6X
SC18ZP0BX
SC24ZP6BX
Air Inlet(Rear)
Air Outlet
Connection Valve
E-5
Remote Control - Buttons and Display
Operating mode
Remote control
transmission indicator
Battery discharge indicator
Fan speed
Anion indicator
Sleep mode
(
AUTO,
DRY,
COOL,
FAN)
Turbo mode
Temperature setting
Air flow direction
Off Timer setting
On Timer setting
Energy saving
On/Off button
Temperature adjustment
buttons
Mode selection button
(AUTO, COOL, DRY, FAN)
Fan speed adjustment
button
Turbo button
Digital iOn/Off button
Swing button
Energy saving button
On Timer button
Timer Set/Cancel button
Off Timer button
Sleep button
Anion button
E-6
ENGLISH
Getting Started
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your
air conditioner. Please take the time to read it as it will help you take full
advantage of the unit’s features.
The booklet is organized as follows.
◆ The following figures are shown on pages from 4 to 6 :
- Indoor and outdoor units
- Remote control(buttons and display)
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-7
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆ You purchase the air conditioner
◆ The remote control does not work correctly
Note
E-8
◆
◆
◆
◆
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
ENGLISH
Selecting the Automatic Operating Mode
You can start the air conditioner in Automatic mode from your remote
control. In the Automatic mode, the optimum temperature and the fan
speed is selected automatically.
1
If necessary, press the
Result:
IMPORTANT
(On/Off) button.
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2 If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in AUTO mode.
Note
You can change modes at any time.
button.
E-9
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the
Result:
IMPORTANT
(On/Off) button.
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2 If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
3
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in COOL mode.
Note
You can change modes at any time.
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
4
button.
◆ Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Automatic (rotated :
)
Low
Medium
High
Result:
5
E-10
Each time you press the
beeps.
button, the indoor unit
To control the direction of the air flow, refer to pages 16 and 17.
ENGLISH
Changing the Room Temperature Quickly
The Turbo cooling function is used to cool your room as quickly as possible.
Example :
You have just come home and find that the room is very
hot. You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the
Result:
2
Press the
Result:
(On/Off) button.
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit
was last used.
◆ The indoor unit beeps.
button.
◆ The temperature and fan settings are adjusted automatically.
◆ The air conditioner cools the room as quickly as possible.
◆ After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
But, if you press the
button in DRY or FAN mode,
it will change to AUTO mode automatically.
3
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
Result:
4
button again.
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
To control the direction of the air flow, refer to pages 16 and 17.
E-11
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
Result:
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
2
Note
E-12
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in DRY mode.
You can change modes at any time.
button.
To adjust the temperature, press the
button one or more times
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
4
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
3
(On/Off) button.
◆ Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
To control the direction of the air flow, refer to pages 16 and 17.
ENGLISH
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
Result:
2
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
Note
3
(On/Off) button.
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in FAN mode.
◆ The temperature is set automatically.
You can change modes at any time.
Select the fan speed by pressing the
until the required setting is displayed:
Low
button.
button one or more times
Medium
High
Result:
4
Each time you press the
button, the indoor unit beeps.
To control the direction of the air flow, refer to pages 16 and 17.
E-13
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the
Energy saving mode with the Energy saving button.
1
If necessary, press the
Result:
IMPORTANT
2
button.
◆
◆
◆
◆
The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
The outer air flow blade moves up and down.
To stop the Energy saving mode, press the
button again.
To adjust the temperature, press the
button one or more times
until the required temperature is displayed. Possible temperatures are
between 26°C and 30°C inclusive.
Note
5
button.
You can select the Energy saving mode only in the COOL mode.
Press the
Result:
4
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
Select COOL mode by pressing the
Note
3
(On/Off) button.
◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
If you want to adjust temperature under 26°C, cancel the
Energy saving mode before adjusting the temperature.
To select the fan speed, press the
button one or more times
until the required setting is displayed.
6
E-14
To control the direction of the air flow, refer to pages 16 and 17.
ENGLISH
Generating Anion
The air conditioner can generate anion with an ionizer in the indoor
unit. Since it is an additional function, you can select it any mode,
even when the air conditioner is turned off.
1
Press the
Result:
button.
◆ The air conditioner generates anion.
◆ The indoor unit beeps.
Note
If you press the
button during off, the air conditioner
will turn on automatically and generate anion in the Fan
mode with Low fan speed.
2
If you wish to stop the Anion function, press the
button again.
Result: The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
3
To control the direction of the air flow, refer to pages 16 and 17.
E-15
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air flow blade on the bottom
of the unit, thus increasing the efficiency of the air conditioner.
1
Press the
Result:
button one or more times as required.
The outer blade is adjusted vertically.
RECOMMENDATION
2
When...
Adjust the blade to face...
Cooling
Upwards.
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
Result:
3
The blade move up and down, around the base position set.
To stop the blade moving up and down, press the
Note
E-16
button.
button again.
If you switch the air conditioner... Then the blade is...
Off
Closed completely.
On again
Set to the initial position powered.
ENGLISH
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E-17
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hours inclusive.
2
Press the
Result:
3
(Set/Cancel) button to complete the setting.
◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The selected mode and the temperature on the display
disappear after 10 seconds.
◆ The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result:
◆ The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
Press the
Note
E-18
(Set/Cancel) button.
◆ If you press the
button when the Off Timer is set,
the Off Timer is also cancelled.
ENGLISH
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from
30 minutes to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hours inclusive.
2
Press the
Result:
(Set/Cancel) button to complete the setting.
◆ The remaining time is displayed.
◆ Blinking of the timer indicator stops.
◆ The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off timer setting.
Example If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
Note
1. Press the
button until ‘2.0 Hr’ is displayed.
2. Press the
(Set/Cancel) button.
3. Press the
button until ‘4.0 Hr’ is displayed.
4. Press the
(Set/Cancel) button.
You can see or change the setting mode and/or the temperature
by pressing the
button or the
button after setting the
Off timer.
To Cancel the Off Timer
Press the
Note
(Set/Cancel) button.
◆ If you press the
button when the On Timer is set,
the On Timer is also cancelled.
E-19
Setting the Sleep Timer
The Sleep Timer can be used when you are cooling your room to
switch the air conditioner off automatically after a period of 6 hours.
Note
If you wish to switch the unit off at a specific time, refer to
page 19.
1
Make sure that you have selected the COOL mode.
2
Press the
◆ The indoor unit beeps.
◆ The air conditioner will be controlled as indicated in the
illustrations below.
Result:
Cooling
button.
The desired temperature is
increased by 1°C every hour.
When it has been increased
by 2°C (after 2 hours), the
temperature is maintained for
four hours.
To Cancel the Sleep Timer
If you no longer wish to use the Sleep Timer that you have set, you
can cancel it at any time.
Press the
Result:
E-20
button.
◆
The indoor unit beeps.
◆
The
◆
The air conditioner operates normally.
is no longer displayed.
ENGLISH
Operating Recommendation
Here is a recommendation that you should follow when using
your air conditioner.
Topic
Recommendation
Power failure
If a power failure occurs when the air conditioner
is operating, the unit is switched off.
When the power returns, the air conditioner starts
up again automatically.
E-21
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperatures
The automatic protection feature may be triggered and the air conditioner stopped.
Low temperatures
A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
Mode
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Cooling
Drying
21°C to 43°C approx.
18°C to 43°C approx.
18°C to 32°C approx.
18°C to 32°C approx.
80% or less
-
❇
If the cooling operation is used at over 33°C(indoor temperature), it does not cool at its full capacity.
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the remote control is lost or broken.
1
Slide the lower front grille down.
2
To switch the air conditioner on, press the On/Off switch on the right
side of the indoor unit.
Result: ◆ The Operation indicator on the indoor unit comes on.
◆ The indoor unit beeps.
◆ The air conditioner starts up in the most suitable mode for
the room temperature:
3
Operating Mode
21°C or above
Cool
To switch the air conditioner off, press the On/Off switch again.
Note
E-22
Room Temperature
Even if the air conditioner has been switched on via the
On/Off switch, operations can still be controlled using the
remote control as usual.
ENGLISH
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Explanation/Solution
Problem
The air conditioner does not
operate at all
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the operation indicator on the indoor unit is on;
if necessary press the
(On/Off) button on the remote control.
◆ Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 18 and 19 for further details)
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit
(seven meters/yards or less).
No beep is heard when you press
the
(On/Off) on the remote
control
◆ Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
◆ Replace the remote control batteries if necessary.
The air conditioner does not cool
◆ Check that the correct operating mode has been selected (AUTO,
COOL).
◆ The room temperature may be too low.
◆ Dust may be blocking the air filter guard;
refer to page 24 for cleaning instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change
when you press the
button
◆ Check that the operating mode is set to COOL or FAN ;
in the AUTO mode, the fan speed changes automatically and in the
DRY mode, it is set to AUTO.
The air flow direction does
not change when you press the
button
◆ Check that the air conditioner has been switched on;
if necessary, press the
(On/Off) button on the remote control.
The timer is not correctly triggered
◆ Check that the timer has been programmed correctly;
see pages 18 and 19.
Odour is permeated in the room
during air conditioning
◆ Air the room.
E-23
Cleaning Your Air Conditioner
For the best use of your air conditioner, you must clean it every two
weeks regularly to remove the dust that accumulates on the air filter.
IMPORTANT
Grille support
Lower
front
grille
Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.
1
Slide the lower front grille down.
2
Open the upper front grille by pulling right and left sides of the grille.
3
Disassemble the upper front grille by opening the grille completely.
4
Lift out the bottom edge of the air filters and pull down to release them.
5
Remove all dust on the air filters with a vacuum cleaner or brush.
6
When you have finished, insert the top part of the filters into their slot
and push down on the bottom edge until they click into place.
7
Clean the front grille with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).
8
Fix the left side of grille support, then insert the right side of grille support.
Body groove
Hook
Note
◆ If you have not used the air conditioner for a long period of time, set the
fan going for three to four hours to dry the inside of the air conditioner
thoroughly.
◆ To close the upper front grille completely after cleaning filters, turn on
and turn off the air conditioner.
E-24
ENGLISH
Cleaning Deodorizing and Bio-Green Filters (Option)
To remove minute dust particles and odors, deodorizing and Bio-Green
filters are installed in the air conditioner. You should clean the filters
every 3 months.
1
Open the upper front grille by pulling right and left sides of the grille.
2
Pull out the deodorizing and Bio-green filters.
3
Wash the filters with clean water, then dry them in the shade.
✴✴07/09/12/14✴✴
Bio-Green Filter Deodorizing Filter
✴✴18/24✴✴
4
Insert the filters into the original position.
Note
5
Bio-Green Filter
You can change the position of filters with each other.
Close the front grille.
Deodorizing Filter
E-25
THIS AIR CONDITIONER IS MANUFACTURED BY:
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:
CE CLIMATISEUR EST FABRIQUE PAR:
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:
DIESE KLIMAANLAGE IST FABRIZIERT VON:
AYTH H ™Y™KEYH KATA™KEYA™THKE A¶O:
ELECTRONICS
Download PDF