Samsung | WD-B1255 | Samsung WD-B1255 User manual

WD-J1255(V/S/C/R)
WD-B1255(V/S/C/R)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/global/register
FMW-Conmbi_02414D_EN.indd 1
2007-03-06 ¿ÀÈÄ 4:59:19
features
• Child Lock
The Child Lock function keeps curious little hands out of the washer. This safety feature
ensures, that children do not toy with the operation of the washer. It also alerts you when it is
activated.
• Large Loads Program
This program can wash bigger laundry items with 4 innovations.
(Skin Care System / Tangle Reducing System / Crease Release System / Deep Cleaning
System)
• Delay Start
This function enables uses to delay the washing machine’s starting time for up to 24 hours.
• Quick Wash
No time to loose! Less than 30minutes wash will give you time to run out before it’s too late.
Our 28minute Quick Wash program can be the solution to your busy life. Now you can wash
your favorite clothes in only 28minutes, guaranteed!
• Delicates & Wool Program
Special care can be determined by the appropriate temperature, the gentle wash action and
the appropriate amount of water.
2_
FMW-Conmbi_02414D_EN.indd 2
2007-03-06 ¿ÀÈÄ 4:59:19
safety information
Congratulations on your purchase of this Samsung washing machine. These
Owner’s Instructions contain valuable information on the installation, use, and
care of this appliance. Please take the time to read these instructions so that
you can take full advantage of the washing machine’s features and enjoy this
appliance for many years to come.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual means:
WARNING
CAUTION
CAUTION
Hazards or unsafe practices that may result in severe personal injury or
death.
Hazards or unsafe practices that may result in minor personal injury or
property damage.
To reduce the risk of fire, explosion, electric shock, or personal injury when
using your washer, follow these basic safety precautions:
BEFORE USING THE APPLIANCE
CAUTION
Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.
The appliance is designed for home use only.
Make sure that water and electrical connections are made by qualified technicians,
observing the manufacturer’s instructions (see “Installing the Washing Machine”) and local
safety regulations.
All packaging and shipping bolts must be removed before the appliance is used. Serious
damage may occur if they are not removed. See “Removing the shipping bolts”.
Before washing clothes for the first time, you must run a complete cycle without clothes.
See “Washing for the first time”.
SAFETY INSTRUCTIONS
WARNING
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet
or set the (On/Off) button to Off.
Make sure that the pockets of all clothing to be washed are empty. Hard, sharp objects,
such as coins, safety pins, nails, screws, or stones can cause extensive damage to the
appliance.
Always unplug the appliance and turn off the water after use.
Before you open the door of the appliance, check that the water has drained. Do not open
the door if you can still see water.
Pets and small children may climb into the appliance. Check the appliance before each use.
Safety information _3
FMW-Conmbi_02414D_EN.indd 3
2007-03-06 ¿ÀÈÄ 4:59:20
safety information
The glass door becomes very hot during the washing cycle. Keep children away from the
appliance while it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or
unqualified persons may cause injury and/or make more serious repairs to the appliance
necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
This appliance should only be serviced by an authorized service center, and only genuine
spare parts should be used.
This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to ensure that they do not play with
the appliance.
If this appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set or electrical portable outlet device must be positioned so that it
is not subject to splashing or ingress of moisture. Additionally, the cord extension set or
electrical portable out let device must be of a current rating suitable for the appliance.
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
Do not use processed water containing oil, cream or lotion, which is usually found in skincare shops or massage clinics.
•
Otherwise this will cause the packing to be deformed, which causes a malfunction or
water leak.
A stainless washing tube does not usually rust. However if some metal such as a hair pin is
left in the tube for an extended time, the tube could rust.
•
•
•
Do not leave water or bleach containing chlorine in the tube for an extended period of
time.
Do not regularly use or leave water containing iron in the tube for an extended period of
time.
If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to
the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a
metal brush)
For washing machines with ventilation openings in the base, that a carpet must not
obstruct the openings.
Use the new hose-sets and old hose-sets should not be reused.
4_ Safety information
FMW-Conmbi_02414D_EN.indd 4
2007-03-06 ¿ÀÈÄ 4:59:20
contents
INSTALLING THE WASHING
MACHINE
6
6
7
7
7
8
9
9
Unpacking the washing machine
Overview of the washing machine
Selecting a location
Adjusting the leveling feet
Removing the shipping bolts
Connecting the water supply hose
Connecting the water supply hose (Option)
Positioning the drain hose
WASHING A LOAD OF LAUNDRY
10
10
11
12
13
13
14
Washing for the first time
Putting detergent in the washing machine
Overview of the control panel
Washing clothes using Fuzzy Logic
Washing clothes manually
Using delay start
Washing tips and hints
MAINTAINING THE WASHING
MACHINE
15
15
15
16
16
17
Draining the washing machine in an
emergency
Repairing a frozen washing machine
Cleaning the exterior
Cleaning the detergent drawer and recess
Cleaning the debris filter
Cleaning the water hose mesh filter
TROUBLESHOOTING
18
18
Problems and solutions
Understanding error messages
APPENDIX
19
19
19
20
20
Fabric care chart
Electrical warnings
Protecting the environment
Declaration of conformity
Specification
6
10
15
18
19
Contents _5
FMW-Conmbi_02414D_EN.indd 5
2007-03-06 ¿ÀÈÄ 4:59:20
installing the washing machine
UNPACKING THE WASHING MACHINE
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received
all of the items shown below. If the washing machine was damaged during shipping or you do not have all
of the items, contact your Samsung dealer immediately.
OVERVIEW OF THE WASHING MACHINE
Worktop
Control panel
Drain Hose
Plug
Base cover
Adjustable feet
Debris filter
Door release
Emergency drain tube
Filter Cover
Wrench
Water supply hose
Hose guide
Bolt hole covers
6_ Installing the washing machine
FMW-Conmbi_02414D_EN.indd 6
2007-03-06 ¿ÀÈÄ 4:59:22
SELECTING A LOCATION
Ventilation openings must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
ADJUSTING THE LEVELING FEET
If the floor is uneven, adjust the feet (do not insert pieces of
wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until it is at
the desired height.
2. Tighten the locking nut by turning it with the wrench.
If the washer is placed on an uneven or weak surface, noise or
vibration occurs. (Only l degree angle is allowed.)
loose
01 Installing the washing machine
Before you install the washing machine, select a location with the following characteristics:
• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)
• Away from direct sunlight.
• Adequate ventilation
• Room temperature that will not fall below 0 ˚C
• Away from sources of heat such as coal or gas
Make sure that the washing machine does not stand on its power cord.
REMOVING THE SHIPPING BOLTS
Before using the washing machine, you must remove all of the
shipping bolts from the back of the unit. To remove the bolts:
1. Loosen all bolts with the wrench before removing them.
2. Take each bolt head and pull it through the wide part of the
hole.
Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
Installing the washing machine _7
FMW-Conmbi_02414D_EN.indd 7
2007-03-06 ¿ÀÈÄ 4:59:23
installing the washing machine
CONNECTING THE WATER SUPPLY HOSE
The water supply hose must be connected to the washing machine at one end and to the water faucet at
the other. Do not stretch the water supply hose. If the hose is too short replace the hose with a longer, high
pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water
supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink’s cold water faucet and
tighten it by hand. If necessary, you can reposition the water supply hose at the washing
machine end by loosening the fitting, rotating the hose, and retightening the fitting.
Option
Hot water supply valve
Option:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water faucet and
tighten it by hand.
3. Use a Y-piece if you only want to use cold water.
8_ Installing the washing machine
FMW-Conmbi_02414D_EN.indd 8
2007-03-06 ¿ÀÈÄ 4:59:23
CONNECTING THE WATER SUPPLY HOSE (OPTION)
1. Remove the adaptor from the water supply hose.
3. Connect adaptor to the water tap by tightening the screws
firmly.
Then, turn part (b) following the arrow and put(a) and (b)
together.
4. Connect the water supply hose to the adaptor. Pull down
part (c) of the water supply hose.
When you release part (c) the hose automatically connects
to the adaptor making a ‘click’ sound.
01 Installing the washing machine
2. First, using a ‘+’ type screw driver, loosen the four screws on
the adaptor. Next, take the adaptor and turn part(b) following
the arrow until there is a 5mm gap.
a
b
c
5. Connect the other end of the water supply hose to the
inlet water valve at the rear of the washer. Screw the hose
clockwise all the way in.
After completing connection, if water leaks from the hose, then repeat the same steps. Use
the most conventional type of faucet for water supply. In case the faucet is square or too
big, remove the spacing ring before inserting the faucet into the adaptor.
POSITIONING THE DRAIN HOSE
The end of the drain hose may be positioned in three ways:
Over the edge of a wash basin.
The drain hose must be placed at a height of between
60 and 90 cm. To keep the drain hose spout bent, use
the supplied plastic hose guide. Secure the guide to the
wall with a hook or to the faucet with a piece of string to
prevent the drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60
cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60
cm and no longer than 90 cm.
Installing the washing machine _9
FMW-Conmbi_02414D_EN.indd 9
2007-03-06 ¿ÀÈÄ 4:59:25
washing a load of laundry
WASHING FOR THE FIRST TIME
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the
(On/Off) button.
2. Pour a little detergent into compartment ( ) in the
detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40 ˚C is
displayed.
5. Press the Start/Pause button.
• This will remove any water from the manufacturer’s test run
remaining in the machine.
Dispenser
Dispenser
Dispenser
: Detergent for prewash or starch.
: Detergent for main wash, water softener, pre-soaking agent, bleach and stain
removal product.
: Additives,e.g.fabric softener or former (fill no higher than lower edge of insert “ A”)
PUTTING DETERGENT IN THE WASHING MACHINE
1.
2.
3.
4.
Pull out the detergent drawer.
Add laundry detergent into compartment ( ).
Add softener into compartment ( ) (if you desire).
Add prewash detergent into compartment ( ) (if you desire).
CAUTION
Concentrated or thick fabric softener and conditioner must
be diluted with a little water before being poured into the
dispenser (prevents the overflow from becoming blocked.
10_ Washing a load of laundry
FMW-Conmbi_02414D_EN.indd 10
2007-03-06 ¿ÀÈÄ 4:59:27
OVERVIEW OF THE CONTROL PANEL
A
2
3
4
5
6
7
8
9
10
11
12
 This is a general manual. The INLAY system may be different from that of the product you purchased.
For A , see item 6 below to select the right specifications that match your product.
1
2
3
4
5
Digital graphic
display
Prewash
selection button
Temperature
selection button
Rinse selection
button
Child Lock
selection button
02 Washing a load of laundry
1
Displays the remaining wash cycle time,all of washing information and error
messages.
Press the button to select prewash.
Press the button repeatedly to cycle through the available water temperature
options (cold water ( ), 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
Press the rinse button to add rinse cycles. Maximum number of rinse cycles
is five.
This is a button for preventing children from manipulating the washing
machine.
On/Off - To set the program on: Press the Start/Pause button to turn on the
washing machine.
Press and hold down the [Rinse] + [Spin] button for 2-3 seconds. It can only
be activated when the machine is turned on. Once you set the Child Lock on
while in washing, no button is activated until you set if off. Even the POWER
button will not be activated. The Child Lock lamp lights on. To set the
program off: Press and hold down the [Rinse] + [Spin] button again for 2-3
seconds, then the lamp lights off and is set off.
Check out the Child Lock button first when no button is activated while
the washing machine is working.
Press the button repeatedly to cycle through the available spin speed options
6
Spin selection
button
7
Delay Start
selection button
8
9
Dry selection
button
Crease Release
selection button
WD-J1255/WD-B1255
,
, 400, 800, 1000, 1200 rpm
No spin ( ) - The laundry remains in the drum without being spun after the final drain
Rinse Hold (
) - The laundry remains soaking in the final rinse water. Before the
laundry can be unloaded, either “Drain” or the “Spin” program must be run.
Press the button repeatedly to cycle through the available delayed start
options (from 3 hour to 24 hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
Press the button repeatedly to cycle through the available dry selections.
(120min. -> 90min. -> 60min. -> 30min.)
Select this function to reduce the crease of clothes. The whole washing
process will be prolonged by 10 minutes.
Washing a load of laundry _11
FMW-Conmbi_02414D_EN.indd 11
2007-03-06 ¿ÀÈÄ 4:59:29
washing a load of laundry
10
Fuzzy Control
dial
Turn the dial to select one of the 14 available wash programs
Standard, Stains, Quick, Wool, Half Load, Big Wash, Clean Tub, Air Wash
(Deodorization, Sterilization), Dry, Rinse, Rinse+Spin, Spin, Drain
11
Start/Pause
selection button
Press to pause and restart programs.
12
(On/Off)
selection button
Press once to turn the washing machine on, press again to turn the washing
machine off. If the washing machine power is left on for longer than 10
minutes without any buttons being touched, the power automatically turns
off.
WASHING CLOTHES USING FUZZY LOGIC
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Logic” automatic control
system. When you select a wash programme, the machine will set the correct temperature, washing time,
and washing speed.
To wash clothes using the Fuzzy Logic programs:
1.
2.
3.
4.
5.
6.
Turn on your sink’s water faucet.
Press the (On/Off) button.
Open the door.
Load the articles one at a time loosely into the drum, without overfilling.
Close the door.
Add the detergent, softener, and prewash detergent (if necessary) into the appropriate
compartment.
7. Turn the Fuzzy Control dial to select
the appropriate program for the type of
clothes Standard, Stains, Quick, Wool,
Half Load, Big Wash, Clean Tub, Air
Wash(Deodorization, Sterilization), Dry,
Rinse, Rinse+Spin, Spin, Drain.
You will see the indicators light up on the
control panel.
8. At this time, you can control the wash temperature, rinsing times, spin speed, delay time by
pressing the appropriate option button.
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The
process indicator will light up and the remaining time for the cycle will appear in the display.
12_ Washing a load of laundry
FMW-Conmbi_02414D_EN.indd 12
2007-03-06 ¿ÀÈÄ 4:59:30
Pause Option (Stop & Adding laundry Function)
Within 5 minutes from start, it is possible to put in the laundry or take out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
After the total cycle has finished,the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the (On/Off) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature. (cold water, 30˚C, 40˚C, 60˚C,
95˚C)
8. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed. [ , , 400, 800, 1000, 1200 , …
revolutions per minute(rpm)]
02 Washing a load of laundry
When the cycle is finished:
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine.
: No spin ,
: Rinse hold
10. Press the button repeatedly to cycle through the available delayed start options (from 3 hour
to 24 hours in one hour increments). Displayed hours means the time of finished washingcycle.
11. Press the Start/Pause button and the machine will begin the cycle.
USING DELAY START
You can set the washing machine to finish your wash automatically at a later time, choosing from 3 to 24
hour delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin
counting down until it reaches your finish time.
4. To cancel Delay Start, press the (On/Off) button, then turn the washing machine on again.
Washing a load of laundry _13
FMW-Conmbi_02414D_EN.indd 13
2007-03-06 ¿ÀÈÄ 4:59:31
washing a load of laundry
WASHING TIPS AND HINTS
Sorting your laundry: Sort your laundry according to the following characteristics:
• Type of fabric care label symbol: Sort laundry into cottons, mixed fibres, synthetics, silks,
wools and rayon.
• Colour: Divide whites and colours. Wash new, coloured items separately.
• Size: Placing items of different sizes in the same load will improve the washing action.
• Sensitivity: Wash delicate items separately, using the Delicate wash programme for pure
new wool, curtains and silk articles. Check the labels on the items you are washing or refer to
the fabric care chart in the appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing
machine drum, and the water tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should
be tied together.
Prewashing cotton: Your new washing machine, combined with modern detergents, will give
perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is
particularly dirty, use a prewash with a protein-based detergent.
Determining load capacity: Do not overload the washing machine or your laundry may not
wash properly. Use the chart below to determine the load capacity for the type of laundry you are
washing.
Fabric Type
Load Capacity
WD-J1255
WD-B1255
Standard
8.0 kg
6.5 kg
Stains
3.0 kg
3.0 kg
Quick
2.0 kg
2.5 kg
Wool
5.0 kg
4.0 kg
Detergent tips: The type of detergent you should use is based on the type of fabric (standard,
stains, quick, wool), colour, wash temperature, degree and type of soiling.
Always use “low suds” laundry soap, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based upon the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, ask your water authority.
Keep detergents and additives in a safe, dry place out of the reach of children.
14_ Washing a load of laundry
FMW-Conmbi_02414D_EN.indd 14
2007-03-06 ¿ÀÈÄ 4:59:31
maintaining the washing
machine
DRAINING THE WASHING MACHINE IN AN EMERGENCY
03 Maintaining the washing machine
1. Unplug the washing machine from the power supply.
2. Open the filter-cover by using a coin or a key.
3. Unscrew the emergency drain cap by turning left. Grip the
cap on the end of the emergency drain tube and slowly pull
it out about 15 cm.
4. Allow all the water to flow into a bowl.
5. Reinsert the drain tube and screw the cap back on.
6. Replace the filter-cover.
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain
operations are normal.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and nonabrasive
household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
Maintaining the washing machine _15
FMW-Conmbi_02414D_EN.indd 15
2007-03-06 ¿ÀÈÄ 4:59:32
maintaining the washing
machine
CLEANING THE DETERGENT DRAWER AND RECESS
1.
2.
3.
4.
5.
Press the release lever on the inside of the detergent drawer and pull it out.
Remove the cap from compartment ( ).
Wash all of the parts under running water.
Clean the drawer recess with an old toothbrush.
Reinsert the cap (Pushing it firmly into place) and replace the liquid detergent divider into the
drawer.
6. Push the drawer back into place.
7. Run a rinse programme without any laundry in the drum.
CLEANING THE DEBRIS FILTER
Clean the debris filter 5 or 6 times a year, or when you see the following
error message on the display:
1. Open the filter-cover, See “Draining the washing machine in
an emergency” on page 15.
2. Unscrew emergency drain cap by turning left and drain
off all the water. See “Draining the washing machine in an
emergency” on page 15.
3. Unscrew the filter cap and take it out.
4. Wash any dirt or other material from the filter. Make sure
the drain pump propeller behind the filter is not blocked.
Replace the filter cap.
5. Replace the filter-cover.
16_ Maintaining the washing machine
FMW-Conmbi_02414D_EN.indd 16
2007-03-06 ¿ÀÈÄ 4:59:34
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least one time per year, or
when you see the following error message on the display:
Option
03 Maintaining the washing machine
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the
end of the hose and rinse it under water until clean. Also
clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are
watertight.
Option
Maintaining the washing machine _17
FMW-Conmbi_02414D_EN.indd 17
2007-03-06 ¿ÀÈÄ 4:59:35
troubleshooting
PROBLEMS AND SOLUTIONS
PROBLEM
SOLUTION
The washing machine
will not start
•
•
•
•
Make sure the door is firmly closed.
Make sure the washing machine is plugged in.
Make sure the water source faucet is turned on.
Make sure to press the Start/Pause button.
No water or insufficient
water supply
•
•
•
•
Make sure the water source faucet is turned on.
Make sure the water source hose is not frozen.
Make sure the water intake hose is not bent.
Make sure the filter on the water intake hose is not clogged.
Detergent remains in the
detergent drawer after
the wash programme is
complete
•
Make sure the washing machine is running with sufficient water
pressure.
Put the detergents in the inner parts of the detergent drawer
(away from the outside edges).
Washing machine
vibrates or is too noisy
•
•
•
•
•
Make sure the washing machine is set on a level surface. If the surface is
not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure the washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine
does not drain and/or
spin
•
•
Make sure the drain hose is not squashed or bent.
Make sure the water hose mesh filter is not clogged.
The Door does not open
1.
2.
3.
4.
Disconnect the power plug from the power supply.
Remove the water from the washing machine.
Open the filter cover using a coin.
Locate the orange plastic tab and pull forward to open the door.
UNDERSTANDING ERROR MESSAGES
ERROR CODE
SOLUTION
door
•
Close the door.
4E
•
•
Make sure the source water faucet is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
•
Laundry load is unbalanced; loosen any tangled laundry. If only one item
of clothing needs washing, such as a bathrobe or jeans, the final spin
result might be unsatisfactory and an “UE” error message will be shown
in the display window.
cE/3E
•
Call after-sales service.
HOT
•
Displayed when the door does not open for high temperature.
UE
Before contacting After-Sales service:
1. Try to remedy the problem (See “Troubleshooting” on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
18_ Troubleshooting
FMW-Conmbi_02414D_EN.indd 18
2007-03-06 ¿ÀÈÄ 4:59:35
appendix
FABRIC CARE CHART
Can be ironed at 100˚C max
Delicate fabric
Do not iron
Item may be washed at 95˚C
Can be dry cleaned using any
solvent
Item may be washed at 60˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40°C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30°C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200˚C max
Tumble dry, reduced heat
Can be ironed at 150˚C max
Do not tumble dry
05 Appendix
Resistant material
ELECTRICAL WARNINGS
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind:
• Operate the appliance only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this appliance is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the power outlet
only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still
doesn’t fit, contact your electrician to replace your outlet.
• Protect the power cord. Power supply cords should be routed so that they are unlikely to be walked on
or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the programme
used).
Appendix _19
FMW-Conmbi_02414D_EN.indd 19
2007-03-06 ¿ÀÈÄ 4:59:41
appendix
DECLARATION OF CONFORMITY
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
SPECIFICATION
TYPE
FRONT LOADING WASHER
DIMENSION
WD-B1255
WD-J1255
W598mm X D550mm X H844mm
W598mm X D600mm X H844mm
WATER PRESSURE
50 kPa ~ 800 kPa
WATER VOLUME
54 L (STANDARD COURSE)
56 L (STANDARD COURSE)
75 kg
78 kg
WASH
6.5 kg
8.0 kg
DRY
3.0 kg
3.5 kg
NET WEIGHT
LOAD
MODEL
POWER
CONSUMPTION
WASHING
230 V
150 W
WASHING AND
HEATING
220 V
2000 W
240 V
2400 W
220 V
2000 W
240 V
2400 W
230 V
34 W
DRY
PUMPING
PACKAGE Wt
SPIN
REVOLUTION
WD-B1255/WD-J1255
PAPER
2.5 kg
PLASTIC
1.0 kg
rpm
1200
20_ Appendix
FMW-Conmbi_02414D_EN.indd 20
2007-03-06 ¿ÀÈÄ 4:59:42
memo
FMW-Conmbi_02414D_EN.indd 21
2007-03-06 ¿ÀÈÄ 4:59:42
memo
FMW-Conmbi_02414D_EN.indd 22
2007-03-06 ¿ÀÈÄ 4:59:42
memo
FMW-Conmbi_02414D_EN.indd 23
2007-03-06 ¿ÀÈÄ 4:59:42
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
THAILAND
1800-29-3232
02-689-3232
www.samsung.com/th
Code No. DC68-02414D_EN
FMW-Conmbi_02414D_EN.indd 24
2007-03-06 ¿ÀÈÄ 4:59:42
Download PDF