Samsung | DM-B28AFW | Samsung DMB28AFS User manual

Dishwasher
user manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/global/register
Cover.indd 1
2008-06-17 ¿ÀÈÄ 5:20:06
2
EN
CONTENTS
1/ FOR THE USER’S ATTENTION
• Safety instructions ______________________________________
• Protection of the environment______________________________
• Economical, environmentally friendly washing ________________
2/ DESCRIPTION OF YOUR APPLIANCE
• General presentation of the dishwasher ____________________
• Presentation of the control panel __________________________
3/ INFORMATION ______________________________________________
4/ WHAT TO DO BEFORE FIRST USING THE MACHINE
• Measure the water hardness and select the type of detergent __
• Hardness table__________________________________________
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
• For traditional products __________________________________
• For multi-purpose products ________________________________
6/ LOADING OF REGENERATING SALT __________________________
7/ LOADING OF RINSING PRODUCT ____________________________
8/ YOUR DISHWASHER’S EQUIPMENT
• The lower basket ________________________________________
• The upper basket ________________________________________
• The cutlery basket ______________________________________
9/ YOUR DISHWASHER’S SAFETY SYSTEMS ______________________
10/ WASHING PROGRAMMES TABLE ____________________________
11/ PROGRAMMING __________________________________________
12/ CLEANING YOUR APPLIANCE
• Cleaning the waste filters ________________________________
13/ IF OPERATING ABNORMALITIES OCCUR ______________________
14/ AFTER-SALES SERVICE ____________________________________
15/ INDICATIONS FOR THE TESTING LABORATORIES ______________
3
4
5
5
6
7
8
9
9
10
11
12
13
14
15
16
17
18
20
22
23
28
29
EN
1/ FOR THE USER’S ATTENTION
• Children’s safety
Important :
— This appliance is not intended for use by
young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use the
appliance safely.
— This appliance must only be used by adults.
Ensure that children do not touch it and do not
use it as a toy. Ensure that they do not operate
the appliance’s controls.
— Keep young children away from the appliance when it is operating.
— Detergents contain irritant and abrasive substances. These products can have caustic
effects on the eyes, the mouth or the throat.
They can be extremely dangerous if ingested.
Avoid any contact with the skin and the eyes.
Ensure that the appliance’s detergent container is empty at the end of the washing cycle.
— Place detergents out of children’s reach and
do not put any detergent in the machine until
just before you start the washing programme.
— The water in your dishwasher is not drinking
water; this is why children must not go near
the appliance when its door is open.
— Do not let your children play or sit on the
door when it is open.
— Once you have unpacked your appliance,
place the packaging out of children’s reach.
— Keep all the packaging materials (e.g. plastic
bags, polystyrene, etc.) out of children’s reach
because they can be dangerous for children
(ie. risk of suffocation).
Keep this user’s manual with your appliance. If the appliance is sold or transferred to
someone else, ensure that the manual is with
it. Please take note of these instructions
before installing and using your appliance.
They have been drawn up for your own and
other people’s safety.
• SAFETY INSTRUCTIONS
• Installation
— When you receive your appliance, unpack it
or have it unpacked immediately. Check that it
has not suffered any damage during transport.
Express any reservations in writing on the
delivery note, of which you keep a copy. Never
connect up a damaged machine. If your appliance is damaged, please contact your dealer.
— Before proceeding to connect up your
machine, please refer to the instructions in
your Installation Guide.
— Your dishwasher must be kept disconnected
from the mains supply throughout the whole
of the installation process.
— The electrical connection details on your
appliance’s description plate must comply
with those for the mains supply.
— The socket must still be accessible once
your appliance has been installed.
— Do not alter or attempt to alter the appliance’s characteristics. This could put you at
risk.
— If your installation has to be altered, only
entrust the electrical and plumbing work to a
qualified electrician or plumber respectively.
— Your appliance is designed for normal
domestic use. Do not use it for industrial or
commercial purposes or for any other purpose
than that for which it has been designed.
— The dishwasher’s walls must not be pierced
under any circumstances.
• Use
— This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
— When machine is running, do not open door.
This may provoke steam leakage or splattering
of water.
4
EN
1/ FOR THE USER’S ATTENTION
— Only use products specially designed for your dishwasher (water softening salt, detergent and
rinsing products).
— As far as possible, avoid opening the dishwasher’s door when it is operating, and in particular
during the heating phases, because scalding steam may escape or you may be splashed with hot
water. The machine is fitted
with a safety system that immediately blocks the dishwasher’s operation if the door is opened.
— Never use chemical solvents in your appliance because these could cause an explosion.
— Always close your appliance’s door after loading or removing your items.
— Do not lean or sit on your appliance’s door when it is open.
— You are strongly advised to disconnect the machine after use and turn off the water supply.
— Unplug your machine before carrying out any technical work on it.
— Avoid placing your machine immediately next to a cooking or heating appliance to prevent any
risk of heat damage;
— Do not place any items in your machine, which are not certified as dishwasher safe.
— If you have removed an item before the end of the washing programme, it is important to rinse it
carefully to remove any residual washing products.
— If your appliance breaks down, never attempt to repair it yourself. Any repairs made by non-qualified personnel can cause significant damage or lack of control.
— The machine complies with applicable safety regulations. Any repairs should be carried out by
qualified technicians. Repairs or changes that do not conform may be dangerous for the users. In
case of replacement, only use original parts.
— If the machine malfunctions due to other causes than those mentioned in this booklet, disconnect
the machine (remove the plug) or break the circuit concerned and contact after-sales service.
• ENVIRONMENTAL PROTECTION
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by
dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with this
label to indicate that in countries that are a members of the European Union the used
appliances should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your
town hall or your retailer for the used appliance collection points closest to your home.
We thank you doing your part to protect the environment.
• ECONOMICAL, ENVIRONMENTALLY FRIENDLY WASHING
— Remove any food residue from your crockery (bones, pips, etc.)
— Do not pre-wash your items by hand (useless waste of water).
— Utilise your dishwasher’s capabilities to the full for an economical, environmentally friendly wash.
— Always select a washing programme suitable for the crockery type and how dirty they are.
— Avoid overdosing with detergent, regenerating salt and rinsing liquid. Follow the recommendations in this guide (pages 9-10-11) and the instructions on the product packs.
— Ensure that the water softener is correctly set (see pages 10).
5
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• GENERAL PRESENTATION OF THE DISHWASHER
A
B
C
D
E
F
G
H
I
J
Fig. 01
A
Removable top
F
Regenerating salt tank
B
Upper basket
G
Waste filter
C
Washing products dispenser
H
Main filter
D
oversize plate barrier
I
Rinsing product dispenser
E
Lower sprinkler arm
J
Description plate (Model number)
Advice:
This user’s guide is applicable to several models. There may be some slight differences
in the details and the equipment between your appliance and the descriptions provided here.
6
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• PRESENTATION OF THE CONTROL PANEL
E
A
Fig. 02
A Selector switch (3 functions):
• Choosing a programme: Turn the
E
TA B S
selector switch to choose a programme.
• selector switch: Turn the switch to the
Select position to access Select options.
(See Section 5, / Detergent products and
adjusting the water softener).
• Off: Turn the switch to the “STOP” position
when the programme has finished.
B C D
The indicator lights:
Multipurpose products:
lit; shows you that the “4/1” feature is turned
on and that the programmes are now automatically adjusted if a multi-function tablet is
used.
Salt:
B
Selection of washing with a
Delayed Start
- Softener setting button.
When lit, it indicates lack of regenerating salt
Rinsing liquid:
When lit, it indicates lack of rinsing product
C The Screen gives the duration, the time
remaining for the programme, the delayed start
and the softener setting.
D Start/Cancel: Briefly press this button
to start your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
7
EN
3/ INFORMATION
Important:
For impeccable results, preferably
use a combination of traditional products:
① Washing detergent to clean the
For your dishwasher to provide impeccable washing and drying results with no
marks, you must set it correctly using the
water softening system, which uses regenerating salt.
crockery perfectly (powder, liquid or standard tablets).
② Regenerating salt to enable your dishwasher’s water softener to operate correctly.
• THE WATER HARDNESS
• Lime:
rainwater filtering through the
ground picks up mineral salts; some minerals
are found in solid form commonly termed
lime. This reduces the washing detergent’s
performance, furs up the dishwasher and leaves white marks on the crockery.
The more lime there is in the water, the more the
water is called “hard”.
③ Rinsing liquid to assist drying and to
eliminate marks from water droplets.
Important:
Never use washing-up liquid.
Use the most suitable products for the level of
water hardness in your town.
There are several types of products; how to
choose:
For ease of use and in certain water
hardness conditions only (< 25°F),
multi-purpose products can make the
use of regenerating salt and rinsing liquid
unnecessary.
• “Two-in-one” tablets contain detergents and rinsing liquid or an agent serving
the function of the salt.
• “Three-in-one” tablets contain
detergents and rinsing liquid as well as an
agent serving the function of the salt.
• “Four-in-one” “Five-in-one”
tablets... also contain additives that prevent wear on poor quality glasses or the risk
of stainless items corroding.
Important:
Follow the instructions for using the
multi-purpose product and the recommendations on the pack.
NB:
If in any doubt, please contact the
detergent manufacturer if the crockery is
very wet at the end of the programme or if
chalky deposits appear.
8
EN
4/ WHAT TO DO BEFORE FIRST USING THE MACHINE
• MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETERGENT: TRADITIONAL OR MULTI-PURPOSE
In one simple action, you can test the your water’s lime content using the testing strip supplied with
your dishwasher. Alternatively, contact your local water utility to ascertain your water’s hardness.
— Let the water run from the tap for a few moments.
— Fill a glass with water.
— Take the test strip from its holder and immerse it for 3 seconds.
— Wait 1 minute, shake it and look at the colours to ascertain your water’s hardness.
• HARDNESS TABLE
Test strip
> 70°F
10-18°F
18-25°F
25-40°F
40-55°F
55-70°F
Very hard
Slightly hard Slightly hard
Hard
Hard
Hard
Essential if Essential if
Optional using traditional using traditional Mandatory Mandatory Mandatory Mandatory
products
products
Hardness
Water
Water softening and use
of salt
0-10°F
Soft
Possible use of
traditional products ➊
➊
or ➋
or
+
or
Use only of
traditional products ➊
+
R
or
Multi-purpose
or
+
➋
➊ Traditional products:
P : Powder detergent or L : Liquid detergent or
+ S : Regenerating Salt + R : Rinsing product
➋ Multi-purpose products:
Multi-purpose tablets
9
single tablet
+
R
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
• FOR TRADITIONAL PRODUCTS
• Your machine must be specially adjusted to use traditional products.
• Proceed as follows to set the softener on the control panel:
— Turn the selector to the “Set” position; the screen displays
SEL to inform you that you are in setting mode.
— Press the "Delayed start” button; the screen gives you the
H4 factory setting).
setting (H
— To change this setting (depending on hardness of water),
press successively on the "Delayed start" button. Each press
changes the setting. Refer to the table below.
— The setting is automatically confirmed when exiting Set; selector at programme or Stop position.
Testing strip
Hardness
0-10°F
Traditional
product
H0
10-18°F
25-40°F
18-25°F
HI
H2
H3
40-55°F
55-70°F
H4
H5
> 70°F
H6
Important:
It is very important to set the water softener correctly.
- If the setting is too low, there is the risk of chalky marks appearing.
- if the setting is too high, there is the risk of causing clouding of the glasses.
If you relocate, adjust the water softener setting as required.
• Traditional tablets
Non-multipurpose tablets should be placed in the external compartment (Fig 04) or, for optimum
performance, pull out the dispenser drawer and lay the tablet inside (Fig 05).
• Powders or liquids (Fig 03)
Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirty
crockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that you
add 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the programmes table.
Important:
Keep these products out of children’s reach and away from dampness.
Only use products specially designed for dishwashers.
Fig. 03
Fig. 04
Fig. 05
10
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
• FOR MULTI-PURPOSE PRODUCTS :
TA B S
OPTION
• Your machine can be specially adjusted to use multi-purpose products if
the water hardness is less than 25°F.
Tip:
Your dishwasher’s “TABS” option adjusts to the wide range of multipurpose products. It
has two possible settings, which you access via the Select.
“Extra Dry” (the factory setting) improves the results after drying where the “2 in 1”, “3 in 1” or “4 in 1”
multipurpose product offers a lower level of performance.
“Sparking Clean” improves the shine of your crockery, whatever sort of multipurpose product
you use.
• Proceed as follows to set the softener on the control panel:
Set”, position; the screen display SEL to inform you that you are in
— Turn the selector to the “S
setting mode.
— Press the “Delayed start” button; the screen shows the setting (H4 factory setting).
— To use the multi-function tablets, select the H0, HI or H2 setting, depending on the hardness of
the water.
— To change this setting (depending on hardness of water), press successively on the "Delayed
start" button. Each press changes the setting.
TA B S
(Light unlit) : deactivates the “TABS” option.
TA B S
(Light permanently lit) : corresponds to activation of the “TABS” option with the “Extra Dry” setting.
TA B S
(Light flashing): corresponds to activation of the “TABS” option with the “Sparkling Clean” setting.
— The setting is automatically confirmed when exiting Set; selector at programme or Stop position.
— The setting selected will be automatically applied; the “TABS” light will come on.
Testing strip
Hardness
0-10°F
Multi-purpose
products Function Deactivated
H0
Multi-purpose
products Extra Dry
H0
Multi-purpose
products Sparkling Clean
H0
10-18°F
TA B S
HI
TA B S
TA B S
H2
TA B S
HI
TA B S
18-25°F
TA B S
HI
TA B S
H2
TA B S
TA B S
H2
Important :
The multi-purpose products setting enables you to deactivate the rinsing and salt warning
lights only on H0 and “TABS”.
• Loading the multi-purpose tablet dispenser
To assist in loading the detergent, the distributor is situated on the front of the upper basket. It is
compatible with all the products recommended for dishwashers.
• Place the tablet in the external compartment (Fig 04 on previous page) or, for optimum
results, pull out the distributor’s drawer and lay the tablet inside (Fig 05 on previous page).
- Close the dispenser.
11
EN
6/ LOADING OF REGENERATING SALT
• Loading of regenerating salt (Fig 06)
Filling with salt is essential for providing a
good wash without marks. It regenerates the
resins that soften the water, by removing its
lime content (unless the mains water supply is
soft enough). Refer to “Setting the water softener”.
A
Important :
SSEalt
L
Only use special dishwasher regenerating salt. Do not use table salt or any type of
cooking salt, this could damage your appliance’s water softener.
A Unscrew and remove the stopper on the
salt tank.
B
B Fill the tank with regenerating salt specially designed for dishwashers.
er
wEaAtU
C Use the funnel supplied with your dishwasher. The first time, top up with water up to
the rim of the tank.
• Regenerating salt indicator:
C
This illuminates when salt must be added.
After the tank has been filled with regenerating salt, the indicator light may remain lit until
the salt has dissolved sufficiently, usually
after one cycle (of if the tank has not been
filled completely; for example, when first putting the machine into service using the sample).
This can be deactivated as indicated in the
paragraph “For multi-purpose products” setting table.
Fig. 06
Important
If the salt overflows when filling the tank,
to avoid oxidization of the tub it is advisable to
remove the salt crystals or to run a Prewash
programme (or Rapid programme depending on the model).
12
EN
7/ LOADING OF RINSING PRODUCT
• Loading of rinsing product (Fig. 07)
Important :
Only use a rinsing product designed for
dishwashers. The rinsing product ensures
your items shine and are well dried.
A
A
B When first putting the machine into
service, fill the tank until the level is flush with
the top of the adjustment lever. Pour in at least
all the rinsing product provided.
The tank contains 120 ml (approximately one
glass)
The original setting is in the centre (middle
position: reference mark 2). If you encounter
marks or poor drying after a few cycles, you
can adjust the setting using the adjustment
lever (fig 07 C ; Reference mark 3 will
increase the setting).
- Close the tank lightly
3
12
B
• Rinsing liquid indicator light:
This illuminates when rinsing product is
required.
It can be deactivated as shown in the paragraph “For multi-purpose products” setting
table.
3
12
C
Important :
If any of the product overflows during
filling, sponge up the excess to avoid producing foam.
Fig. 07
13
Adjustment lever
EN
8/ YOUR DISHWASHER’S EQUIPMENT
Very important
Items not suitable for washing in a dishwasher:
- Wooden cutting boards
- Stainless steel utensils or plastic utensils that are not heat-resistant
- Copper or pewter items
- Glued crockery and cutlery
- Cutlery with wooden, horn or mother-of-pearl handles
- Antique or hand-painted porcelain
When purchasing crockery, glasses or cutlery, ensure that it is dishwasher-safe
• THE LOWER BASKET
Arrange your items so that the water can circulate freely and spray over all the utensils.
Place large diameter dishes and pans at the
sides.
Do not intersperse, jam together or superimpose flat plates and concave dishes (Fig. 08).
The flexible racking spikes makes it easier to
arrange your large dishes (Fig. 09).
Advice:
When you re-insert the lower basket,
ensure that nothing catches on the oversize
plate barrier to avoid blocking the rotating
spray arm.
Fig. 08
Unloading your items
Empty the lower basket to avoid drips from
the upper basket falling onto the lower basket.
Fig. 09
14
EN
8/ YOUR DISHWASHER’S EQUIPMENT
• THE UPPER BASKET
This basket is particularly designed to take
glasses, cups, ramekins, small salad bowls,
bowls and saucers.
Arrange your items methodically to save on
space (arranging glasses, cups or bowls
together).
You can also arrange cups, ladles, etc. on the
folding cup racks (Fig. 10)
Advice:
Position the cavities of glasses, cups
or bowls facing downwards.
Cutlery basket
Fig. 10
• Adjusting the height of the upper
basket
For large dishes to be loaded in the lower
basket, the upper basket must be set the to
high position. This can be done with the basket fully loaded (Fig. 11)
① Setting in HIGH POSITION:
Gently raise your basket on each side until it
engages.
Fig. 11
② Setting in LOW POSITION:
Raise your basket completely on both sides to
unlock it and then lower it to the low position.
Important :
Check that the two slides are set to the
same height and the basket is horizontal.
15
EN
8/ YOUR DISHWASHER’S EQUIPMENT
• THE CUTLERY BASKET
The cutlery basket slides to allow flexible
loading.
It can be placed anywhere in the lower basket.
You can therefore make a variety of loads
depending on the items (Fig. 12).
If your cutlery items or your dishes are too
large, alter the height setting for the upper
basket.
Fig. 12
Movable grills are available for if you wish to
load your cutlery in an orderly manner (Fig.
13).
For optimum washing and drying, use these
separation grills partially or totally.
Point the handles on the cutlery downwards.
Important :
Fig. 13
For safety reasons, we recommend
that you place knives with pointed ends with
the point facing downwards in the cutlery
basket (to avoid the risk of an accident).
Long-bladed knives and other sharp kitchen
utensils must be placed flat in the upper basket.
Avoid washing cutlery with horn handles in
your dishwasher.
Separate silverware from other metals using
the separation grill.
16
EN
9/ THE DISHWASHER’S SAFETY SYSTEMS
• Door not closed properly
The screen flashes when the door is not closed or not properly closed.
• Locked programme access
While the programme is running, the programme selection switch is automatically locked and cannot be changed. It will unlock automatically when the programme ends or is cancelled.
• Anti-overflow system
This system automatically activates the drain pump if the water level in the tub reaches an abnormal height.
• Anti-leak system
This system interrupts the water supply if a leak is detected under the appliance.
Note:
To unlock, press the Start/Cancel button and hold it down for three seconds.
17
EN
10/ WASHING PROGRAMMES
• PROGRAMMES TABLE
Type of items:
- porcelain, pans, cut lery, glasses, etc.
Mixed
Delicate
Mixed
Very short cycle
(with no
detergent) for
Intensif
rinsing and
AUTO
re-dampening
the
Opti
60
items
while
Eco
waiting for a wash
Flash 30
expected the
Fragile
following
day or
even the day after
For glasses and
delicate crockery
Meaning a smaller
quantity of not very
sticky residues.
Very short 30-minute
wash
specially designed
for a small amount
of daily items with a
limited amount of
non-greasy residue,
not dried on
PROGRAMMES
Prewash
DELICATE
QUICK
Programme sequence
Cold pre-wash
Washing at 40°C
Washing at 45°C
Rinse
Rinse
Hot rinse
Hot rinse
Drying
by condenser
Short drying cycle,
not fan assisted
60’ - 75’
16
0,95
30’
11
0,8
Quantity, type and
amount of food
residue.
As an indication only:
Duration in min
Water (L)
Energy (Kwh)
15’
4,5
0,02
These values refer:
- to normal usage conditions with separated products (detergents, salt, rinsing product).
- only to multifunction product usage conditions
They may vary depending on the load, the water temperature, the softener setting, the presence of
rinsing product and the supply voltage.
18
EN
10/ WASHING PROGRAMMES
Mixed
Mixed
Mixed
Resistant
Normally dirty, i.e. a
normal amount of
sticky and greasy
residue.
A longer
programme because
it saves on energy.
Normally dirty, i.e. a
normal amount of
sticky and greasy
residue.
Automatic
detection of the
amount of residue.
Optimises the
results and
prioritises
energy savings.
Very dirty
large dishes and
pans, with baked on
residue, grease,
cooked cheese,
sauce, etc.
Eco
Normal
Auto
Intensive
Pre-wash
Hot pre-wash
Washing at 50°C
Washing at 60°C
lavage 55/65°C
Washing at 70°C
Rinse
Rinse
Rinse
Rinse
Hot rinse
Hot rinse
Hot rinse
Hot rinse
Drying
by condenser
Drying
by condenser
Drying
by condenser
Drying
by condenser
160’ - 165’
16 - 18
1,05 - 1,3
60’
16
1,3 - 1,4
100’ - 130’
17 - 21
1,4 - 1,6
120’ - 140’
17 - 19
1,7 - 1,8
19
EN
11/ PROGRAMMING
E
A
Fig. 02
B C D
Advice :
Consult the Programmes table on the preceding pages to determine the programme you
need for the type of items, the quantity and the amount of food residue.
• Immediate start of a programme
Choose the programme by turning Selector A . The
screen displays the duration of the programme
selected.
Press “Start” D , and the programme begins.
The “Time remaining” light comes on.
The screen tells you the time remaining for the programme as the programme progresses.
Programme length
Remaining time
End of programme
• Delayed start of a
B programme.
Programme delayed start, one hour at a time (1 hr to
Delayed start” button.
12 hrs), by pressing the “D
D
Confirm by pressing
. “Start”.
The screen counts down the time until the programme starts.
Waiting for delayed start
Remaining time
• Cancelling a programme.
Cancel Start” button for a few
Press the D “C
seconds. The “Time remaining” light is off; you may
re-programme.
• Stopping the machine.
When the programme has finished, turn the selector
Stop” position.
to A “S
20
End of programme
EN
12/ CLEANING YOUR APPLIANCE
• CLEANING THE WASTE FILTERS
➀
The filtration system consists of several
elements:
A - The waste filter
B - The large main filter
B
A
C - The micro filter
➁
The filters are located in the centre of the tub
and must be washed regularly to obtain optimum washing results.
Actions :
➀ Before removing the filters, remove any
waste on the large main filter B with a
sponge so that the waste does not block the
sprinkler arms. Rotate the spray arm as
shown in the drawing. (Fig. 14)
A
③
➁ Loosen the waste filter a quarter of a turn
and then remove it A
③ Remove the main filter B
④ Remove the micro filter
C
B
C
④
C
⑤ Carefully clean filters
A , B and C
under running water (Fig. 15)
Fig. 14
⑤
Re-installation:
Proceed in reverse order, inserting filters C
and B and then A
A
Important :
Fig. 15
Remember to lock the waste filter A
in place by pushing it in fully and turning it a
quarter turn.
21
B
C
EN
12/ CLEANING YOUR APPLIANCE
• Periodically
Every 3 or 4 months, in order to remove any deposits, run a special maintenance programme, without any items in the machine, using a special dishwasher cleaning product.
Important :
Keep this product out of children’s reach.
• If not using your dishwasher for a prolonged period:
Clean your dishwasher completely and then unplug it from the electricity supply and close the water
tap. Protect your machine from potential frost.
Advice :
Do not use abrasive powders, metal sponges and alcohol-based or thinner-based products.
Use a cloth or a sponge.
If you are moving house, run a soaking programme first of all, in order to avoid any water escaping.
22
EN
13/ IF OPERATING ABNORMALITIES OCCUR
• SUMMARY OF THE FAULTS
d01: water supply fault (tap)
d07: overflow / anti-leak fault
d02: draining fault
d08: sprinkling distribution fault
d03: heating fault
d11: pressure sensor fault
d04: temperature fault
d12: filling fault (water inlet detection system)
d05: fault – motor under load
d13: overheating fault
d06: fault - motor overload
d14 : installation fault : (incorrect drainage
connection or inadequate flow rate and tap).
Tip:
If one of the above faults occurs and you need to call a repair man, remember to tell him
the message displayed (d01, d02..) as this information will help him.
• BEFORE CALLING FOR SERVICE
Problem
Possible Causes
What to do?
The door falls heavily when - Door springs not tensioned
- Tighten the two tensioning
opened (integratable model)
enough to compensate for the screws accessible in the botweight of the panel.
tom section above the front
feet.
The door does not stay horizontal - Door springs tensioned too
- Loosen the two tensioning
when open or returns too quickly much.
screws accessible in the bot(integratable model)
tom section above the front
feet.
- Fit a temporary wooden panel
- No wooden panel.
on the appliance and adjust
the springs.
The door catches when closing - Appliance not stable
- Door not centred on the tub
- Adjust the feet.
- Re-centre by adjusting the
rear feet.
The upper basket does not stay - Poor manipulation (the basket - Act more progressively (see
in the high position
is being pulled upwards too
instructions), one side and
quickly)
then the other.
Small leak around or under the - Leak from the tap.
appliance (move the appliance
- Leak from the appliance.
to locate the leak)
(Cf. table fault d07).
Small leak at the door
- Check that a seal is fitted and
retighten the nut.
- Close the water tap and call a
technician.
- Appliance not stable or not level - Adjust the feet.
- Door not centred on the tub. - Re-centre by adjusting the rear
feet.
23
EN
13/ IF OPERATING ABNORMALITIES OCCUR
• THE INDICATOR LIGHTS
Problem
The salt light does not go out
Possible Causes
What to do?
- No salt or an insufficient quan- - Refill the tank and wait for the
tity of salt in the tank to trigger cycle to end. If you have soft
the float.
water that requires no salt, the
light is constantly lit.
The lights all light up one after - Wrong programme.
the other
A light flashes and the pro- - Programme selector wrongly
gramme does not start
positioned (between two notches)
- Cancel the current programming by holding down the Start
button for 3 seconds and then
re-programme.
- Reposition the selector on a
programme.
• RELATING TO PROGRAMMING, DISPLAY
Problem
The cycle lasts too long
Possible Causes
What to do?
- The energy-saving programmes last longer because the
agitation and drying times are
longer to compensate for the
lower washing and drying temperatures
- Use these programmes preferably at night when it is not so
important how long the programme lasts or when it ends.
The appliance trips the circuit - Insufficient amperage to supbreaker
ply all the appliances being
operated simultaneously.
- Internal fault in the appliance.
The appliance does not start
- Check the socket’s amperage
(10A minimum) and the meter’s
capacity.
- Call a technician.
- No mains power to the socket. - Check the socket and the fuse
- Tap closed (Cf. table fault d01). - Check the tap is open.
- Check the hose line is OK.
- Water supply hose kinked.
- Selection error or programme - Cancel by holding down Start
for 3 secs and re-programme.
blocked.
- Start button pressed too long - Just press Start briefly to start
the programme.
(greater than 2 secs).
- Appliance in Safety mode (anti- - Call a technician.
leak) (Cf. table fault d07).
24
EN
13/ IF OPERATING ABNORMALITIES OCCUR
Problem
The appliance will not restart
The appliance does not drain
(Cf. table fault d02).
The appliance will no longer
function (see table, fault 14).
Possible Causes
What to do?
- Door opened during a
washing cycle.
- Wait for the time delay to end
(controlled internally by the
appliance).
- The cover has not been remo- - Remove the cover.
ved from the sink’s U-bend.
- Drain hose kinked.
- Check the drain hose line
behind the machine is OK.
- Filters totally blocked.
- Remove and clean the filters
and the drain.
- Pump blocked.
- Initiate a Soaking programme
If the fault persists, call a technician.
- installation of non-compliant drai- - adhere to the drainage tube
nage system: drainage too low
installation dimensions.
down or pipe pushed too far in.
- siphoning: the appliance is
emptying as the same time as
it is filling up.
• POOR WASHING RESULTS
Problem
Possible Causes
What to do?
Food traces and deposits in the - Items poorly arranged (mas- - Arrange the items properly.
glasses
ked by another larger item or
Use the most appropriate
situated underneath it, items
areas and accessories for each
nested or jammed together).
type of item (see instructions).
- Upper spray arm blocked by - Check that the spray arm
cutlery or a dish etc.
rotates freely. Set the basket in
the high position if necessary.
- Check the filter’s facing and that
- Filter poorly locked and lifting the filter is locked in place (push
it in fully, turning it to the right).
during washing.
- Remove all the filters and clean
them (in warm water), including
- Micro filter screen clogged.
the micro filter’s screen (once
a month).
- Remove the spray arm by turn- One or more holes in the spray ing the lever a quarter of a turn
and clean it under the tap (do
arm blocked.
not use any tool that could
damage the holes). Re-install
the spray arm.
Traces of grease
- Detergent dose too low; ineffi- - Increase the dose; try another
cient detergent; stale product. detergent.
- Inappropriate programme
- Select a programme with a
(temperature too low; duration higher temperature.
too short).
25
EN
13/ IF OPERATING ABNORMALITIES OCCUR
• POOR WASHING RESULTS...
Problem
White marks
(identify what type)
Possible Causes
- Chalky film (removable with
vinegar).
- Traces of salt (items have a
salty taste).
White marks
(identify what type)
- Glass cloudy because water
too soft (cannot be removed).
Coloured marks (tea, wine, cof- - Items poorly arranged
fee)
- Detergent dose too low; inefficient detergent
- Programme temperature too
low.
- If you use a multifunction
product.
What to do?
- Check that there is salt in the
tank (light unlit = OK).
- Check the water hardness at
the tap and that the water softener is set correctly. Adjust it
to a higher level if necessary.
- Water too hard for using a “4in-1” detergent without the
addition of salt.
- Check that the stopper on the
salt container is closed correctly.
- Check the water hardness at
the tap and that the water softener is set correctly. Some
detergents in pellet form are
more aggressive to glasses
and decorations (change the
product and use a protective
product if necessary).
- Turn the cavities in the items
towards the jets.
- Increase the dose; try another
detergent.
- Select a more suitable programme
with a higher temperature.
- Use the “4-in-1” option
(depending on the model).
Streaks or dried droplets on - Lack or insufficient amount of - Check the indicator light and
glasses
fill the tank completely. Adjust
rinsing product.
the dispensing unit to a higher
position if necessary.
- Rinsing product out-of-date or - Use a recent product (a good
inefficient.
product dilutes easily and
foams in cold water).
- If you use a multifunction
- Use the “4-in-1” option with a
product.
setting prioritizing drying
(parametering from the menu –
depending on the model).
Dried-on marks on glasses, dull- - If you use a multifunction
- Use the “4-in-1” option with a
ness.
product.
setting prioritizing brilliance
(parametering from the menu –
depending on the model).
26
EN
13/ IF OPERATING ABNORMALITIES OCCUR
• POOR OPERATION
Problem
Possible Causes
What to do?
Constant filling
- Drain hole situated too low for - Drain wand has fallen on the
the appliance (Cf. table fault
floor.
d012).
A lot of waste on the large filter - The filters and drain outlets are - Remove and clean the filters
blocked with too much and the bottom of the drain
at the end of the cycle.
residue.
outlets. Remove large residue
from the plates before putting
them in the machine.
Traces of rust on stainless steel - Quality of the stainless steel ; - Use “special dishwasher-safe”
not dishwasher-safe (knives in cutlery.
- Check that the lid on the salt conparticular)
tainer is closed correctly.
• POOR DRYING RESULTS
Problem
Possible Causes
What to do?
A lot of droplets on the glasses - Lack or insufficient amount of - Check the indicator light and
rinsing product.
fill the tank completely.
- The dose has not been distrib- - If the tank is not empty after
uted.
approximately 60 washings,
call a technician.
- Positioning of the items.
- Arrange the items to restrict
water retention as much as
possible. Leave the door ajar
for a few minutes, if possible
Droplets on plastic items, Tefal - These items have a low calori- - Arrange the items in the upper
coatings, etc.
fic mass.
basket.
Poorer drying on rapid
programmes
- On rapid programmes, the drying - Leave the door ajar for a few
temperature and drying period are minutes.
reduced to cut down the duration
of the cycle as much as possible.
Condensation on the wall of the - Condensation may form on the
inside door or the tub.
walls, particularly after the
appliance has cooled down
(sound insulation increases
this occurance)
27
EN
14/ AFTER-SALES SERVICE
• INTERVENTION WORK
Any intervention work on your appliance must
be performed by a qualified professional
approved by the manufacturer. When you call,
please mention the full reference for your
appliance (model, type and serial number).
This information is shown on the description
plate (see Fig. 16)
ORIGINAL PARTS
When maintenance is being carried out, ask
for only certified original spare parts to be
used.
Fig. 16
28
EN
15/ INDICATIONS FOR THE TESTING LABORATORIES
• Details common to all models
— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 standard place settings
— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - Figs. A-B-C; see next page
— Loading as per the indications on next page, without side shelves
or stemmed glass support, and 5 cup/saucer supports
(4 for12 saucers & 1 for 2 cups)
— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position
— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - 3
— Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - H2
For detailed information on the comparison tests regarding the level of soiling, the types of
crockery and cutlery, etc., contact the equipment manufacturer before commencing the tests.
• Tests to Standard EN 50242:
— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - — Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
“Eco”
30 g of detergent B
NB: When conducting tests using a multi-function tablet: H0 or H1 or H2
- Check that the water softener is correctly set for the water hardness
— Pull out the detergent distribution drawer and place the tablet in the interior compartment.
29
EN
15/ INDICATIONS FOR THE TESTING LABORATORIES
A
B
1
NOK
NOK
2
3
4
OK
5
6
7
8
3 32
30
8 8
8 8
8 8
1
1
1
1
1
1
33 3333 2 33 3
222
1 8 8 8
6
6
8 8 8 5
444
3 4 4 4 44 4
11
C
7
2
2
2
2
2
111
22
444
EN
NOTES
31
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Cover.indd 2
2008-06-17 ¿ÀÈÄ 5:20:06
Download PDF

advertising