Samsung LE20S51BP User Manual

BN68-00963E-00Eng.qxd
7/20/05 9:13 PM
Page 1
LCD TV
LE15S51B
LE20S51B
LE20S51BU
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
BN68-00963E-00
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
This device is a Class B digital apparatus.
Register your product at
www.samsung.com/global/register
00-BN68-00963B-00Eng.qxd
7/19/05 10:04 PM
Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 480p).
• Digital Ready TV: When you
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 1080i).
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the set-top box output is 1080i).
When you watch a digital HD-grade broadcast
on a regular (4:3) TV with the screen size
"16:9" or "Panorama" selected, you will be
able to watch the program but the top and
bottom edges of the screen will be cropped.
Note : If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
00-BN68-00963B-00Eng.qxd
7/19/05 10:04 PM
• Integrated Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a set-top box).
• When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Page 2
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• When you watch a DVD, CD or a
video in wide screen (21:9) format on
a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
01-BN68-00963B-00Eng.qxd
7/19/05 10:07 PM
Page 2
Contents
◆ CONNECTING AND PREPARING YOUR TV
■
■
■
■
■
■
■
■
■
■
■
■
■
Viewing the Control Panel .............................................................................
Viewing the Connection Panel ......................................................................
- Connecting an Aerial or Cable Television Network....................................
- Connecting a Set-Top Box, VCR or DVD ..................................................
- Connecting a Computer .............................................................................
- Connecting External A/V Devices ..............................................................
- Kensington Slot..........................................................................................
Viewing Pictures From External Sources......................................................
Inserting the Batteries in the Remote Control ...............................................
Viewing the Remote Control (All Functions Except Teletext)........................
Viewing the Remote Control (Teletext Functions) .........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ..............................................................................
Becoming Familiar with the Remote Control.................................................
Plug & Play....................................................................................................
Selecting TV Mode or an Input Source .........................................................
Editing an Input Source Name ......................................................................
Choosing Your Language ..............................................................................
◆ SETTING
■
■
■
■
■
■
■
■
English-2
THE
THE
19
20
22
23
24
PICTURE
Changing the Picture Standard .....................................................................
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
◆ SETTING
■
CHANNELS
Storing Channels Automatically.....................................................................
Storing Channels Manually ...........................................................................
Editing the Channels .....................................................................................
Sorting the Stored Channels .........................................................................
Giving Channels Names................................................................................
◆ SETTING
■
THE
4
5
6
6
6
7
7
8
9
10
11
12
12
13
14
16
17
18
25
26
27
SOUND
Changing the Sound Standard......................................................................
Selecting Auto Volume Control......................................................................
28
29
01-BN68-00963B-00Eng.qxd
7/19/05 10:07 PM
Page 3
Contents
◆ SETTING
■
■
■
◆ USING
■
■
◆ USING
■
■
■
■
■
◆ USING
■
■
■
■
■
■
■
■
■
THE
TIME
Setting the Clock ...........................................................................................
Switching Off Automatically ...........................................................................
Switching the Television On and Off Automatically .......................................
THE
VARIOUS FUNCTIONS
Setting the Blue Screen Mode ......................................................................
Displaying Information...................................................................................
THE
33
33
TELETEXT FEATURE
Teletext Feature.............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number ........................................................................
Using FLOF to Select a Page .......................................................................
Storing Teletext Pages ..................................................................................
THE
30
31
32
34
35
36
37
37
PC FUNCTIONS
Setting Up Your PC Software ........................................................................
Coarse and Fine Tuning of the Image...........................................................
Changing the Image Position ........................................................................
Initializing the Image Settings .......................................................................
Adjusting the PC Screen Automatically.........................................................
Picture Mode .................................................................................................
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
Customizing the colour..................................................................................
38
39
40
41
42
43
43
44
45
RECOMMENDATIONS FOR USE
■
■
■
■
■
■
■
■
■
Troubleshooting: Before Contacting Service Personnel ...............................
Power Saver..................................................................................................
Technical and Environmental Specifications .................................................
Display Modes...............................................................................................
Retractable Stand..........................................................................................
Using Your TV in Another Country ................................................................
Using the Anti-Theft Kensington Lock ...........................................................
Installing VESA compliant mounting devices ...............................................
Installing the Wall Mount Kit..........................................................................
46
47
48
49
50
50
51
52
53
Symbols
Press
Important
Note
English-3
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input sources
(TV - AV1 - AV2 - S-Video - PC).
) button
You can also use the SOURCE(
on the TV’s control panel to make selections.
MENU
Press to see an on-screen menu of your TV’s
features.
-
+
Moves the selector left or right on the OSD.
Decreases or increases the level of audio
volume and the values of the selected function.
Moves the selector down or up on the OSD.
Decreases or increases the channel number.
English-4
POWER
Turns ON/OFF your set.
SPEAKERS
HEADPHONE
REMOTE CONTROL SENSOR
Aims the remote control towards this spot on the TV.
POWER INDICATOR
Lights up when you turn the power off.
(Red light shows in stand-by mode, Red shows
when you turn the power on, and light is off after
the power is on. Green shows when you set Timer
on or off.)
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 5
Viewing the Connection Panel
<LE15S51B>
<LE20S51B / LE20S51BU>
Option
Power Input
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
English-5
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 6
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting a Set-Top Box, VCR or DVD
- Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the
VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting a Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to the “PC AUDIO IN” jack on the rear of your set and the other end
to the “Audio Out” jack of the sound card on your computer.
➣ 15 Pin D-SUB connector
English-6
Pin
Separate H/V
Composite H/V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 7
Viewing the Connection Panel
Connecting External A/V Devices
- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder.
- Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
Kensington Slot
- This television has been designed to apply a burglarproof lock. (See page 51)
English-7
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 8
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
2
Check that all the necessary connections have been made
(refer to pages 6 and 7 for further details).
Press the TV button to choose TV mode.
Press the SOURCE button to choose Video mode.
The input sources are displayed in the following order:
AV1 - AV2 - S-Video - PC.
English-8
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set
Find that the remote control is no longer operating correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Install two AAA size batteries.
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English-9
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 10
Viewing the Remote Control (All Functions Except Teletext)
Television On/Off
Numeric buttons for
direct channel access
One/Two-digit channel
selection
Previous channel
-Next channel
-Previous channel
Temporary sound switch-off
Available source selection
Volume up or down
Select to the TV mode directly
Menu display and
change confirmation
Use to see information on the
current broadcast.
Exit the OSD
Control the cursor in the menu
Sound mode selection
Automatic switch-off
Sound effect selection
Picture effect selection
The performance of the remote control may be affected by bright light.
English-10
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 11
Viewing the Remote Control (Teletext Functions)
Teletext hold
P
P
: Teletext next page
: Teletext previous page
Teletext mode selection
(LIST/FLOF)
Exit from the teletext display
Teletext reveal
Teletext index
Teletext sub page
Teletext display/mix
both teletext information
and the normal broadcast
Teletext store
Teletext size selection
Fastext topic selection
English-11
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 12
Switching On and Off
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
When the power cord is plugged in, the LED turns red.
2
Press the
POWER button to switch on.
3
To switch off, press the
POWER button again.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the power
consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER button.
2
To switch back on, simply press the
numeric button, or channel
or
POWER button again, a
button.
Do not leave your set in Standby mode for long periods of time
(when you are away on holiday, for example).
Turn off by pressing the POWER button.
It is best to unplug the set from the mains and aerial.
English-12
01-BN68-00963B-00Eng.qxd
7/19/05 10:08 PM
Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and their
functions.
Button
PRE-CH
-
9
-/--
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again,
or press the + or - button.
MENU
Used to display the
on-screen menu system.
EXIT
Used to return to the previous
menu or normal viewing.
Used to exit the menu system and return directly to normal
viewing.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or decrease
the value of the selected item.
English-13
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 14
Plug & Play
When the set is initially powered ON, you are automatically presented
with a series of basic customer settings.
The following settings are available.
1
If the set is in standby mode, press the
on the remote control.
Result:
2
POWER button
The message Plug & Play is displayed.
It appears for a little while, and then the Language menu
is automatically displayed.
Select the appropriate Language by pressing the
or
button.
The available languages are listed.
You can choose one of 12 languages.
3
Press the ENTER
Result:
4
5
The country menu is displayed:
Belgium - Germany - Spain - France - Italy Netherlands - Switzerland - Sweden - United
Kingdom - Eastern Europe - Others
or
button.
The Auto Store menu is displayed.
Press the ENTER
Result:
button.
The channel search will start and end automatically.
7
Press the ENTER
button.
Select the Hour or Minute by pressing the or
button.
Set the Hour or Minute by pressing the or
button.
(Refer to “Setting the Clock” on page 30)
8
Press the MENU button to confirm your setting.
Result:
9
English-14
button.
Select your Country by pressing the
Press the ENTER
button.
Result:
6
The message “Check antenna input.” is displayed with
OK selected.
Press the ENTER
Result:
button to confirm your choice.
The message “Enjoy your viewing” is displayed,
and then the channel which has been stored will be
activated.
Press the EXIT button to exit.
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 15
Plug & Play
If you want to reset this feature...
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select the Plug & Play.
Press the ENTER
button.
Result:
5
button.
The message Plug & Play is displayed.
For further details on how to set up this feature, refer to the
previous page.
English-15
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 16
Selecting TV Mode or an Input Source
You can choose TV mode or change to an input source connected to
the TV set. Use this button to choose an input source that you would
like to watch.
1
Press the MENU button.
Result:
2
Press the ENTER
Result:
3
button.
The Source List is selected.
Press the or
button to move to the input source that
you wish to choose.
Press the ENTER
button.
Result:
English-16
button to select the Input.
The options available in the Input group are displayed.
Press the ENTER
Result:
4
The main menu is displayed.
The input source changes to the one you have chosen.
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 17
Editing an Input Source Name
Entering the names of the input source devices connected to the input
ports on the TV set allows you to find and choose an input source that
you would like to watch in a quick and convenient manner.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the ENTER
Result:
button to select the Input.
The options available in the Input group are displayed.
3
Press the or
button to select the Edit Name.
Press the ENTER
button.
4
Press the or
button to move to the input source that you wish
to edit.
Press the ENTER
button.
Result:
5
Select the required device by pressing the
Result:
6
The following options are available
or
repeatedly.
The following options are available:
---- - VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo - DHR - PC.
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
English-17
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 18
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indicators.
1
Press the MENU button.
Result:
2
Press the
Result:
English-18
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Language.
Press the ENTER
button.
5
Select a particular Language by pressing the
repeatedly.
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
or
button
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 19
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you
do not wish to watch.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Auto Store.
Press the ENTER
button.
Result:
button.
The Start is selected.
40
5
Press the ENTER
button to search the channels.
The sub menu is changed from Start to Stop with channel search
started.
Result:
The search will end automatically.
Channels are sorted and stored in an order which reflects
their position in the frequency range, (with lowest first and
highest last). The programme originally selected is then
displayed.
3
To stop the search before it has finished, press the ENTER
button to search the channels.
6
When the channels have been stored, you can:
Add or delete the channels (refer to page 22)
Sort them in the order required (refer to page 23)
Assign a name to the stored channels (refer to page 24)
7
Press the EXIT button to exit.
English-19
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 20
Storing Channels Manually
You can store up to 100 channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you wish to
identify
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Manual Store.
Press the ENTER
button.
Result:
5
6
The options available in the Manual Store group are
displayed with the Prog. selected.
or
button
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC4.43
Press the or
button to select Sound System.
Press the ENTER
button.
Select the Sound System required by pressing the
repeatedly and then press the ENTER
button.
Result:
7
button.
Press the or
button to select Colour System.
Press the ENTER
button.
Select the Colour System required by pressing the
repeatedly and then press the ENTER
button.
Result:
English-20
The main menu is displayed.
or
button
The sound standards are displayed in the following order:
BG - DK - I - L
For all the channels to move to the required channel numbers,
repeat steps 5 to 6 after selecting Prog. by pressing the
or
button.
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 21
Storing Channels Manually
8
If you know the channel number to be stored,
Press the or
button to select the Channel.
Press the ENTER
button.
Select C (Air channel) or S (Cable channel) by pressing the
or
button and then press the ENTER
button.
Select the required number by pressing the or
button
and then press the ENTER
button.
If there is abnormal sound or no sound, re-select the
sound system required.
9
If you do not know the channel numbers, press the
to select Search.
Press the ENTER
button.
Start the Search by pressing the or
button.
Press the ENTER
button.
Result:
10
or
button
The tuner scans the frequency range until the first channel
or the channel that you selected is received on your screen.
Press the or
button to select Store.
Press the ENTER
button.
The OK is selected.
Result:
The channel and associated programme number are
stored.
11
Repeat Steps 8 to 10 for each channel to be stored.
12
Press the EXIT button to exit.
English-21
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 22
Editing the Channels
You can exclude any channels of your choice from the channels you
have scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Add/Delete.
Press the ENTER
button.
Result:
5
P
The state of the current channel is displayed.
Press the
or
Add or Delete.
Result:
button.
button to select the channel that you wish to
If the channel that you wish to edit is not in memory,
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in memory,
Delete is selected and displayed.
6
Press the ENTER
button to Add or Delete the channel.
7
Repeat Step 5 for each channel to be added or erased.
8
Press the EXIT button to exit.
P
English-22
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 23
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Assign easily remembered numbers to the channels that you watch
most often.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Sort.
Press the ENTER
button.
Result:
5
Channel
The current Prog., Channel and Name are
displayed.
Select the channel number that you wish to change by pressing
the or
button repeatedly.
Press the ENTER
button.
Result:
6
button.
The selected Channel and Name are moved
to the right side.
Channel
Press the or
button to move to the position which you would
like to change and then press the ENTER
button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
7
Repeat step 5 to 6 for another channel to sort again.
8
Press the EXIT button to exit.
English-23
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 24
Giving Channels Names
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned to the
channels directly. You can however change these names or assign
new names as required.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Name.
Press the ENTER
button.
Result:
5
The current Prog., Channel and Name are displayed.
If necessary, select the channel to be assigned to a new Name
by pressing the or
button.
Press the ENTER
button.
Result:
6
button.
The selection bar is displayed around the name box.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on to the next letter
Press the
button
Move back to the previous letter
Press the
button
Confirm the name
Press the ENTER
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters (space, _ )
English-24
7
Repeat Steps 5 to 6 for each channel to be assigned to a
new name.
8
When you have finished entering the name,
press the ENTER
button to confirm the name.
button
button
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 25
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
3
The main menu is displayed.
or
The options available in the Picture group are displayed.
Press the ENTER
Result:
button to select the Picture.
button.
The Mode is selected.
4
Press the ENTER
5
Select the required picture effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
6
button.
or
button
The following picture effects are available:
Dynamic - Standard - Movie - Custom
Press the EXIT button to exit.
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
English-25
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 26
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Custom.
Press the ENTER
button.
5
Select the option (Contrast, Brightness, Sharpness, Colour
or Tint-NTSC only) to be adjusted by pressing the or button.
Press the ENTER
button.
Result:
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
If you make any changes to these settings,
the picture standard is automatically switched to Custom.
English-26
02-BN68-00963B-00Eng.qxd
7/19/05 10:10 PM
Page 27
Adjusting the Screen Background Colour
You can change the screen background colour according to your
preference.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Colour Tone.
Press the ENTER
button.
Result:
5
button.
The following options are available:
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
When you are satisfied with your choice, press the EXIT button
to return to normal viewing.
English-27
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 28
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU button.
Result:
2
Press the
Result:
3
The main menu is displayed.
or
The options available in the Sound group are displayed.
Press the ENTER
Result:
button to select the Sound.
button.
The Mode is selected.
4
Press the ENTER
5
Select the required sound effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
6
button.
or
The following sound effects are available:
Standard - Speech
Press the EXIT button to exit.
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
English-28
button
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 29
Selecting Auto Volume Control
Reduces the differences in volume level between broadcasters.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select Auto Volume.
Press the ENTER
button.
5
Press the or
button to select Off/On.
Press the ENTER
button.
6
Press the EXIT button to exit.
English-29
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 30
Setting the Clock
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
The Clock is selected.
5
Press the ENTER
button.
Press the or
button to set the Hour.
6
Press the
Press the
7
Press the ENTER
Result:
8
or
or
button to move to Minute.
button to set the minutes.
button.
The clock is set.
Press the EXIT button to exit.
You can also set the time using the numeric buttons on the remote.
English-30
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 31
Switching Off Automatically
You can select a time period of between Off and 180 minutes after which
your set automatically switches off.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
The preset Clock is selected.
5
Press the or
button to select the Sleep Timer.
Press the ENTER
button.
6
Select the number of minutes after which your set switches On
by pressing the or
button repeatedly.
Result:
7
The preset time intervals:
Off, 30, 60, 90, 120, 150, 180 minutes.
Press the EXIT button to exit.
You can also select this feature by simply pressing the "SLEEP"
button.
If the sleep timer is already set, the screen displays the remaining
time and then your set will be switched Off.
If the sleep timer is not yet set, Off is displayed.
Off • 30 • 60 • 90 • 120 • 150 • 180
English-31
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 32
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice
at the time you select.
Switch off automatically at the time you select.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Time menu are displayed with Clock selected.
Press the or
button to select the On Timer.
Press the ENTER
button.
Result:
The On Timer menu is displayed.
To...
6
Press the...
Move to Hour, Minute, Channel and Volume
or
button
Set Hour, Minute, Channel and
Volume level
or
button
Move to Setup
or
button
Select On to enable above setting
or
button
Press the MENU button to return to the previous menu and
to set Off Timer continuously.
Press the or
button to select Off Timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
7
English-32
Press the EXIT button to exit.
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 33
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select Blue Screen.
Press the ENTER
button.
5
Select the required option (On or Off) by pressing the
or
button.
6
Press the EXIT button to return to normal viewing.
Displaying Information
You can view the setting status of the selected source by pressing the
"INFO" button on the remote control.
The information displayed varies according to the selected source.
English-33
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 34
Teletext Feature
Most television channels provide written information services
via teletext.
Information provided includes:
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indicators.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed
in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
English-34
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 35
Displaying the Teletext Information
You can display Teletext information at any time on your set.
☛
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the
or
button.
2
Press the TTX/MIX button to activate the teletext mode.
Result:
The contents page is displayed. It can be redisplayed
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as the
teletext page, press the TTX/MIX button again.
4
Press the TV(
) button again to exit the teletext display.
English-35
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 36
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the page
is then displayed.
If the selected page is linked with several secondary pages,
the secondary pages are displayed in sequence.
To freeze the display on a given page, press the
(hold) button.
Press the
(hold) button again to resume.
Using the various display options:
To display...
English-36
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(subpage)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 37
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1
Display the teletext contents page by pressing the TTX/MIX button.
2
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
Result:
(subpage) button.
The available subpages appear.
◆ Select the required subpage.
Subpages can be scrolled by using the
or
button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the
Result:
(LIST/FLOF) button.
Four 3-digit numbers are displayed in different colours.
The
(LIST/FLOF) button is used to switch between
the LIST and FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
English-37
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 38
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. However, even if your actual screens look different, the same basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Control Panel” on the Windows start
menu.
2
When the control panel window
appears, click on “Appearance and
Themes” and a display dialog-box will
appear.
3
When the control panel window
appears, click on “Display” and a
display dialog-box will appear.
4
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- refer to page 47, 49
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
English-38
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 39
Coarse and Fine Tuning of the Image
Preset to PC mode by pressing the SOURCE button on the remote
control .
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select PC.
Press the ENTER
button.
Result:
5
6
The options available in the PC menu
are displayed.
Press the ENTER
Result:
button.
button.
The Image Lock menu is selected.
Press the or
button to select Coarse or Fine.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
7
Press the or
button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
8
When you are satisfied with the settings, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
English-39
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 40
Changing the Image Position
Preset to PC mode by pressing the SOURCE button on the remote
control .
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select PC.
Press the ENTER
button.
Result:
5
button.
The options available in the PC menu
are displayed.
Press the or
button to select Position.
Press the ENTER
button.
Result:
English-40
The main menu is displayed.
You can adjust the image Position.
6
Press the
Press the
or
or
button to adjust the vertical position.
button to adjust the horizontal position.
7
Press the MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.
03-BN68-00963B-00Eng.qxd
7/19/05 10:12 PM
Page 41
Initializing the Image Settings
Preset to PC mode by pressing the SOURCE button on the remote
control .
You can replace all image settings with the factory default values.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select PC.
Press the ENTER
button.
Result:
5
The options available in the PC menu are
displayed.
Press the or
button to select Image Reset.
Press the ENTER
button.
Result:
6
button.
The message “Image Reset has completed.” is
displayed.
Press the MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.
English-41
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 42
Adjusting the PC Screen Automatically
Preset to PC mode by pressing the SOURCE button on the remote
control .
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select PC.
Press the ENTER
button.
Result:
5
6
button.
The options available in the PC menu
are displayed.
Press the or
button to select Auto adjustment.
Press the ENTER
button.
Result:
English-42
The main menu is displayed.
The screen quality and position are automatically adjusted,
and the screen returns to the original view a few seconds
later.
Press the MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 43
Picture Mode
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
3
The main menu is displayed.
or
The options available in the Picture group are displayed.
Press the ENTER
Result:
button to select the Picture.
button.
The Mode is selected.
4
Press the ENTER
5
Select the required picture effect by pressing the
repeatedly. Press the ENTER
button.
Result:
6
button.
or
button
The following picture effects are available:
Entertain - Internet - Text - Custom
Press the EXIT button to exit.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Custom.
Press the ENTER
button.
5
Select the option (Contrast, Brightness) to be adjusted by
pressing the or
button.
Press the ENTER
button.
Result:
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
If you make any changes to these settings,
the picture standard is automatically switched to Custom.
English-43
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 44
Adjusting the Screen Background Colour
You can change the screen background colour according to your
preference.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Colour Tone.
Press the ENTER
button.
Result:
5
English-44
The main menu is displayed.
button.
The following options are available:
Cool - Normal - Warm - Custom
When you are satisfied with your choice, press the EXIT button
to return to normal viewing.
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 45
Customizing the Colour
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Colour Control.
Press the ENTER
button.
5
Select the option (Red, Green, Blue) to be adjusted by pressing
the or button.
Press the ENTER
button.
Result:
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
English-45
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 46
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
your set and contact your local dealer.
No sound or picture.
◆
◆
◆
◆
Normal picture but no sound.
◆ Check the volume.
◆ Check whether the MUTE
remote control.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER button.
Check the picture contrast and brightness settings.
Check the volume.
button has been pressed on the
No picture or black and white picture.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference.
◆ Try to identify the electrical appliance that is affecting the set
and move it further away.
◆ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
“Check signal cable” message is
displayed.
◆ Check that the signal cable is firmly connected to the PC.
◆ Check that the PC is turned on.
In PC mode, “Mode Not Supported”
message is displayed.
◆ Check the maximum resolution and the frequency of the
video adapter.
◆ Compare these values with the data in the Display Modes.
(refer to page 49)
In PC mode, horizontal or vertical bars
appear to flicker, jitter or shimmer
on the image.
◆ Adjust the Coarse or Fine function. (refer to page 39)
In PC mode, the screen is black and the
power indicator light is steady amber or
blinks every 0.5 or 1 seconds.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press any key on the keyboard.
English-46
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 47
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and
may appear to vibrate.
◆ Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme to
change the display settings.
Your set supports multiscan display functions within the
following frequency domain:
In PC mode, the image is not centred on
the screen.
15”(LE15S51B)
20”(LE20S51B)
20”(LE20S51BU)
Horizontal frequency(kHz)
30~69
28~33
28~47
Vertical frequency(Hz)
50~75
50~70
50~75
Maximum refresh rate
(at 75Hz)
1024x768
640x480
800x600
◆ Adjust the horizontal and vertical position.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth)
above is used for this product. This is not from bad quality and you can use it without uneasiness.
For example, the number of TFT LCD sub pixels: LE15S51B - 2,359,296, LE20S51B - 921,600, LE20S51BU - 1,440,000
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your
computer to set up this feature.
Normal Operation
Power-Saving Function mode
Horizontal Sync
Active
Inactive
Vertical Sync
Active
Inactive
Off
Red, Blinking (1 sec interval)
15” 40W, 20” 50W
Less than 3W
State
Power Indicator
Power Consumption
➣
(EPA/NUTEK)
This set automatically returns to normal operation when horizontal and vertical sync
are restored.
This occurs when you move the computer’s mouse or press any key on the keyboard.
English-47
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 48
Technical and Environmental Specifications
Model Name
LE15S51B
LE20S51B
LE20S51BU
Type
Pixel Pitch
Viewing Angle
331.6(H) x 254.9(V)mm
13.05(H) x 10.03(V)inch
304.1(H) x 228.1(V)mm
11.97(H) x 8.98(V)inch
a-si TFT active matrix
0.297(H) x 0.297(V)mm
140/115
413.0(H) x 311.0(V)mm
16.25(H) x 12.24(V)inch
408.0(H) x 306.0(V)mm
16.06(H) x 12.05(V)inch
a-si TFT active matrix
0.6375(H) x 0.6375(V)mm
160/150
413.0(H) x 311.0(V)mm
16.25(H) x 12.24(V)inch
408.0(H) x 306.0(V)mm
16.06(H) x 12.05(V)inch
a-si TFT active matrix
0.51(H) x 0.51(V)mm
160/120
Frequency
Horizontal
Vertical
Display Color
30 ~ 69kHz
50 ~ 75Hz
16.2 Million
28 ~ 33kHz
50 ~ 70Hz
16.7 Million
28 ~ 47kHz
50 ~ 75Hz
16.7 Million
1024 x 768@60Hz
1024 x 768@75Hz
640 x 480@60Hz
640 x 480@70Hz
800 x 600@60Hz
800 x 600@75Hz
Panel
Size
Display Size
Resolution
Optimum
Maximum
Input Signal
Sync.
Video Signal
H/V Separate, TTL, P or N
0.7 Vp-p @75 Ω
Video
Color System
Video System
PAL / NTSC / SECAM
CVBS, S-VHS, RGB
Power Supply
Input
AC 220V ~ 240V (50 / 60Hz)
Power Consumption
Normal
Power Saving
Dimension (W x D x H)
TV Body
With stand
Weight
With stand
Environmental Considerations
Operationg Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
PC Audio Input
Audio Output
Headphone Output
Frequency
Response
English-48
40W
<3W
50W
<3W
50W
<3W
496.0 x 82.0 x 333.0 mm
(19.52 x 3.22 x 13.11 inch)
496.0 x 170.0 x 359.0 mm
(19.52 x 6.69 x 14.13 inch)
607.0 x 94.0 x 436.0 mm
(23.89 x 3.70 x 17.16 inch)
607.0 x 215.0 x 464.0 mm
(23.89 x 8.46 x 18.26 inch)
607.0 x 94.0 x 436.0 mm
(23.89 x 3.70 x 17.16 inch)
607.0 x 215.0 x 464.0 mm
(23.89 x 8.46 x 18.26 inch)
4.0 kg (8.81 lbs)
7.8 kg (17.19 lbs)
7.8 kg (17.19 lbs)
10°C ~ 40°C (50°F ~ 104°F)
10% to 80%, non-condensing
-20°C ~ 45°C (-4°F ~ 113°F)
5% ~ 95%, non-condensing
RCA Jack (L, R), 0.5Vrms(-9dB)
3.5ø Stereo Jack, 0.5Vrms(-9dB)
2.5W x 2
Max.10mW Output(3,5ø Stereo Jack 32)
RF : 80Hz ~15kHz at -3dB
A/V : 80Hz ~20kHz at -3dB
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 49
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal the standard signal mode, adjust
the mode by referring to your Videocard user guide; otherwise there may be no video. For
the display modes listed below, the screen image has been optimized during manufacture.
Mode(PC)
VGA
LE15S51B
LE20S51B
LE20S51BU
LE15S51B
LE20S51BU
SVGA
XGA
LE15S51B
LE20S51BU
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Clock
Frequency
(MHz)
Sync Polarity
(H/V)
720X400
31.469
70.087
28.322
-/+
640X480
31.469
59.940
25.175
-/-
640X480
37.500
75.000
31.500
-/-
800X600
46.875
75.000
49.500
+/+
800X600
37.879
60.317
40.000
+/+
1024X768
48.363
60.004
65.000
-/-
1024X768
60.023
75.029
78.750
+/+
LE15S51B
English-49
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 50
Retractable Stand
Note: The maximum tilt angle is 13 degrees in the backward direction.
Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause
permanent damage to the mechanical part of the stand.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world.
A TV designed for one system may not work properly with another system due to differences
in the TV channel frequencies.
English-50
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 51
Using the Anti-Theft Kensington Lock
Cable
Figure 2
Figure 1
<Optional>
The Kensington lock is a device used
to physically fix the system when using
it in a public place. The locking device
has to be purchased separately.
The appearance and locking method
may differ from the illustration
depending on the manufacturer.
Please refer to the manual provided
with the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1),
and turn it in the locking direction (Figure 2).
2.
Connect the Kensington lock cable.
3.
Fix the Kensington lock to a desk or a heavy stationary object.
English-51
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 52
Installing VESA compliant mounting devices
<1>
<2>
Mounting pad
<1> Fold the stand pressing the button on the back of the stand.
<2> Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that
come with the arm-type base, wall mount hanger or other bases.
English-52
04-BN68-00963B-00Eng.qxd
7/19/05 10:13 PM
Page 53
Installing the Wall Mount Kit
Note : This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components
Please use provided components or parts to install the Wall Mount Kit.
Bracket
Anchors : 3EA
Screws : 3EA
Installation Guide
How to assemble the Wall Mount Kit
1
Mark the location of hole on the wall using installation guide.
Make over 35mm- depth- hole on the marked location using
5.0-diameter drill.
Fix anchors on each hole on the wall.
Connect bracket to the wall with screws after fitting anchors
into the bracket holes.
Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2
You may use LCD TV right after fixing it to the wall since stand is
wrapped already turned over as shown in the picture below.
3
When using LCD TV in stand-based form, place the product on a
cushion or other soft materials. Then turn over stand following the
arrow direction below only after pressing button on the connected part
where LCD TV is attached to stand.
(Turn over stand in the opposite direction after pressing button when
using LCD TV in wall-mounted form as well.)
English-53
04-BN68-00963B-00Eng.qxd
7/19/05 10:14 PM
Page 54
Installing the Wall Mount Kit
4
Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be
completely fixed to the bracket.
When bracket is assembled on the wall
How to hang LCD TV up on a hook
When installation is completed
5
Remove Installation Guide after completing setup of monitor on the wall.
6
Push the LCD TV up and shift to the right to detach it from bracket.
When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.
How to adjust an angle
(1) Angle adjustment section of
general stand-based LCD TV
(2) Angle abjustment section
while converting the form
(1->3, 3->1)
(3) Angle adjustment section of
wall-mounted LCD TV
Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).
Excessive tilting can turn LCD TV over which might cause damage to LCD TV.
Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.
Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.
Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to
wall-mounted one or vice versa.
- Click" sound indicates section change from 1 to 2 or 3 to 2(1->2, 3->2).
English-54
04-BN68-00963B-00Eng.qxd
7/19/05 10:14 PM
Page 55
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
">