Samsung | HW-K950 | Samsung Samsung HW-K950 Wireless Cinematic Smart Soundbar with Dolby User Manual

HW-K950
User manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
GETTING STARTED
GETTING STARTED
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for
further safety related information.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power
plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must
be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required,
it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the
fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is
no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a
mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly
into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN
or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
, OR COLOURED GREEN OR GREEN AND YELLOW.
LETTER E OR BY THE EARTH SYMBOL
2
GETTING STARTED
Precautions
99.1mm
99.1mm
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker
located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space
around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or
other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect
the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage
the unit.
Do not expose the unit to direct sunlight or other heat
sources. This could lead to overheating and cause the
unit to malfunction.
Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the power
cable from the AC supply if the unit malfunctions. Your
product is not intended for industrial use. It is for
personal use only. Condensation may occur if your
product has been stored in cold temperatures. If
transporting the unit during the winter, wait approximately
2 hours until the unit has reached room temperature
before using.
The batteries used with this product contain chemicals
that are harmful to the environment. Do not dispose of
batteries in the general household trash. Do not dispose
of batteries in a fire. Do not short circuit, disassemble, or
overheat the batteries. There is a danger of explosion if
the battery is incorrectly replaced. Replace only with the
same or equivalent type.
3
ENG
68.6 mm
99.1mm
GETTING STARTED
Dolby Atmos®
This product supports Dolby Atmos®.
* What is Dolby Atmos®?
Atmos technology enhances existing 5.1 channel surround sound systems by adding an overhead speaker.
This envelops the listener in 360 degrees of sound, delivering an immersive, high-definition, rich, detailed, and deeper
experience. See page 24 to learn how to connect the system.
4
GETTING STARTED
CONTENTS
27FUNCTIONS
4
28Bluetooth
2
Safety Information
6
What’s Included
27Input Mode
Dolby Atmos®
7Front / Right Side Panel
Bottom Panel
36APPENDIX
14Installing the Soundbar
36Specifications
Installing the Wall Mount
Detaching the Soundbar from the Wall
18Installing the Surround Speakers on a
Wall
●● Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
19CONNECTIONS
19
22
22
23
Connecting to a TV
Connecting to a TV Using an HDMI (Digital)
Cable
●● You will be informed of the administration fee
amount before a technician visits.
Connecting to a TV Using a Digital Optical
Cable
Connecting to External Devices
25
HDMI Cable
24
●● An administration fee may be charged if either
(a) an engineer is called out at your request and
there is no defect with the product (i.e. where
the user manual has not been read).
(b) you bring the unit to a repair centre and there
is no defect with the product (i.e. where the
user manual has not been read).
Connecting the Subwoofer and
Surround Speakers
24
Software Update
35Troubleshooting
14INSTALLATION
17
33
Using the Network Standby On
Function
35TROUBLESHOOTING
9Remote Control
14
Using the Multiroom App
32
7DESCRIPTIONS
8
30
Connecting Devices in Order to Use Dolby
Atmos®
26Optical or Analogue Audio Cable
5
ENG
2GETTING STARTED
GETTING STARTED
What’s Included
Before reading the User’s Manual
Note the following terms before reading the user manual.
++Icons used in this manual
Icon
Term
Definition
Caution
Indicates a situation where a function does not operate or settings may be cancelled.
Note
Indicates tips or instructions on the page that help you operate a function.
Check for the supplied accessories shown below.
SOURCE
SOUND
LEVEL
EFFECT
VOL
WOOFER
SOUNDBAR
Remote Control /
Batteries (AA Size)
C
Power Cord : 3 EA
CENTER LINE
C TYPE : 700mm
AC/DC Adapter
(for main unit)
Bracket-Wall Mount :
2 EA
Holder-Screw : 2 EA
Screw : 2 EA
C
Wall Mount Guide
Connect the AC plug to the adapter until you
hear a "snapping" sound to ensure they are
securely fastened.
AC Plug
Do not detach the AC plug from the adapter
(it will not be removed once it has been
attached).
(Depending on the country
and model)
●● The appearance of the accessories may differ slightly from the illustrations above.
●● To distinguish the left surround speaker from the right, check the label on the rear of each speaker.
●● Depending on the region, the AC plug may vary in appearance, or it may be supplied integrated with the
adapter.
6
DESCRIPTIONS
DESCRIPTIONS
Front / Right Side Panel
/
(Volume) Button
ENG
1
Controls the volume level.
The numeric value of the volume level appears in the front panel
display.
2
(Source) Button
Right Side
Selects the D.IN, AUX, HDMI1, HDMI2, or BT input.
●● To turn on BT PAIRING mode, press and hold this button in BT
mode.
3
(Power) Button
1
2 3
Turns the power on and off.
Display
Displays the current mode.
●● When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. When you press the
power button, there will be a 20 second delay before the unit produces sound.
●● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
●● If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup
menu of your TV. Refer to the owner's manual supplied with your TV.
7
DESCRIPTIONS
Bottom Panel
AUX IN
Connect to the Analogue output of an external device.
DIGITAL AUDIO IN (OPTICAL)
AUX IN
Connect to the digital (optical) output of an external device.
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT (TV-ARC)
HDMI OUT
(TV-ARC)
Outputs digital video and audio signals simultaneously using an HDMI
cable.
HDMI IN 1, HDMI IN 2
HDMI IN 1
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
Inputs digital video and audio signals simultaneously using an HDMI
cable. Use when connecting a supported external device.
HDMI IN 2
HDMI OUT
(TV-ARC)
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
DC 19V
Wi-Fi SETUP
SPK ADD
SERVICE
HDMI IN 2
HDMI IN 1
LABEL
Wi-Fi SETUP
Wi-Fi SETUP
SPK ADD
HDMI IN 2
Press this button to connect your
Soundbar to your network using
Wi-Fi setup. (Requires a smart
device and the Samsung
Multiroom app. See page 30.)
SPK ADD
Press this button to connect the
Soundbar to a Samsung HUB
(purchased separately) or a network.
(Requires a smart device and the
Samsung Multiroom app.
See page 30.)
DC 19V
SERVICE
DC 19V
(Power Supply In)
Connect the AC/DC power
adaptor to the power supply
jack, and then connect the
AC/DC power adaptor plug to
a wall outlet.
SERVICE
USB micro jack. To upgrade the
product's software. Requires a
USB adapter. (Sold separately.)
See page 33.
●● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
●● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
8
DESCRIPTIONS
Remote Control
ENG
Power
Turns the Soundbar on and off.
SOUND
Surround Sound adds depth and spaciousness to the sound. Pressing the
SOUND button repeatedly cycles through the Surround Sound settings :
ON - SURROUND SOUND, OFF - SURROUND SOUND
• ON: Play sound over all the speakers.
• OFF: Play sound through the original source channel.
Up/Down/Left/Right
Press the indicated areas to select Up/Down/Left/Right. Press Up/Down/
Left/Right on the button to select or set functions.
SOUND
SOURCE
EFFECT
LEVEL
You can also activate the Wi-Fi SETUP function by pressing and holding
the Up button on the remote for more than 5 seconds.
You can also activate the SPK ADD function of the Soundbar by pressing
and holding the Down button of the remote for more than 5 seconds.
Music Skip
Press the Right button to select the next music; press the Left button to
select the previous music.
Anynet+
Press and hold the Right button for about 5 seconds to turn the Anynet+
function on or off.
(Default : ON - ANYNET+ or OFF - ANYNET+)
The Anynet+ function lets you control the Soundbar with the remote from an
Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable.
Auto Power Link
Press and hold the Left button for about 5 seconds to turn the Auto Power
Link function on or off.
(Default : OFF - POWER LINK or ON - POWER LINK)
Synchronizes the Soundbar to a connected Optical source via the Optical
jack so it turns on automatically when you turn on your TV. (See page 23)
The Auto Power Link function is only available in the D.IN mode.
EFFECT
You can select from 6 sound modes - STANDARD (Original Sound),
MUSIC, CLEAR VOICE, SPORTS, MOVIE, and NIGHT - depending on
the content you want to listen to.
Select the STANDARD mode if you want to enjoy the original sound.
* DRC (Dynamic Range Control)
Lets you apply dynamic range control to Dolby Digital tracks.
Press and hold the EFFECT button for about 5 seconds in standby mode
to toggle the DRC (Dynamic Range Control) function ON - DRC and
OFF - DRC.
●● Operate the TV using the TV's remote control.
9
VOL
WOOFER
SOUNDBAR
DESCRIPTIONS
SOURCE
Press to select a source connected to the Soundbar.
* BT PAIRING mode
To turn on BT PAIRING mode in Bluetooth function, press and hold the
SOURCE button for more than 5 seconds.
Play / Pause (BT / WIFI)
Press the p button to pause a music temporarily.
Press the p button again to play the selected music.
SOURCE
SOUND
LEVEL
The ATMOS Soundbar has 5.1.4 channel sound. Use this button to adjust
the volume of each of the speakers. Press this button, use the Left/Right
buttons to select a speaker, and then use the Up/Down buttons to increase
or decrease the level (volume).
FTL
FL
LEVEL
EFFECT
VOL
WOOFER
SOUNDBAR
C
Main Unit
STL
FTR
FR
STR
SL
SR
Surround
Speaker L
Surround
Speaker R
Speaker
Front Left
Front Top Left
Main Unit
Surround Speaker L
Surround Speaker R
Displayed on OLED
when adjusting the level
FL
FTL
Centre
C
Front Right
FR
Front Top Right
FTR
Surround Left
SL
Surround Top Left
STL
Surround Right
SR
Surround Top Right
STR
* Network Standby On/Off
Press and hold the LEVEL button for about 5 seconds to turn the Network
Standby on or off. (See page 32)
10
DESCRIPTIONS
L
W
SO VO
O
O
U L
FE
N
D
R
BA
R WO
SO
O
U
FE
N
D
R
BA
R
L
LE
VE
FE
CT
EF
FE
CT
EF
W
SO VO
O
O
U L
FE
N
D
R
BA
W
R O
SO
O
U
FE
N
D
R
BA
R
LE
VE
L
L
LE
VE
LE
VE
FE
CT
EF
FE
CT
EF
SOURCE
SOUND
ENG
(Sound Control)
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the
Up/Down buttons to adjust the TREBLE or BASS volume from -3 ~ +3.
(Sound Control) button for about 5 seconds to
Press and hold the
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, and 10KHz are selectable (Left/Right) and each can be
adjusted to a setting between -6 ~ +6 (Up/Down).
If the Soundbar is connected to a digital TV and the video appears out of
(Sound Control) button to sync the audio
sync with the audio, press the
with the video. Use the Up/Down buttons to set the audio delay between
0 ms ~ 300 ms. In BT mode, the Audio Sync function may not available.
L
W
SO VO
O
O
U L
FE
N
D
R
BA
W
R
SO
O
O
U
FE
N
D
R
BA
R
L
VO
LE
VE
L
LE
VE
FE
CT
EF
FE
CT
EF
W
SO VO
O
O
U L
FE
N
D
R
BA
W
SO R
O
O
U
FE
N
D
R
BA
R
VO
L
EF
FE
CT
SOUNDBAR
FE
CT
LE
VE
L
LE
VE
L
L
Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
WOOFER
EF
VOL
W
SO VO
O
O
U L
FE
N
D
R
BA
R WO
SO
O
U
FE
N
D
R
BA
R
LE
VE
L
VO
L
VOL
Push the button up or down to adjust the volume.
VO
L
VO
L
LE
VE
EC
T
EF
F
EC
T
EF
F
EC
T
W
SO VO
O
O
U L
FE
N
D
R
BA
W
R O
SO
O
U
FE
N
D
R
BA
R
LEVEL
EFFECT
EF
F
EF
F
EC
T
LE
VE
LE
VE
L
L
VO
L
WOOFER
Push the button up or down to adjust the volume of the subwoofer to -12 or
-6 to +6.
Pressing the button reverts the subwoofer volume to level 0.
++Controlling the Volume of Soundbar by using Your TV Remote Control
W
SO VO
O
O
U L
FE
N
D
R
BA
W
R
SO
O
O
U
FE
N
D
R
BA
R
EC
T
EF
F
EC
T
EF
F
W
SO VO
O
O
U L
FE
N
D
R
BA
W
SO R
O
O
U
FE
N
D
R
BA
R
EC
T
EF
F
EF
F
EC
T
3. In the TV's menu, set the TV speaker to external speaker.
LE
VE
L
LE
VE
L
L
LE
VE
L
SOUND button for more than 5 seconds while the Soundbar is turned on.
LE
VE
1. Press and hold the
2. "ON - TV REMOTE" appears on the Soundbar's display.
11
L
VO
VO
L
●● Not available in TV ARC, BT, HDMI1 and HDMI2 modes. (Available only in D.IN (optical) and AUX
modes)
●● On the TV remote control, only the volume and mute buttons are available. Other buttons are disabled.
●● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
●● Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
●● To turn off this function, press the
SOUND button for 5 seconds.
"OFF - TV REMOTE" appears on the Soundbar's display.
DESCRIPTIONS
Inserting Batteries (AA Battery x2)
Slide the battery cover in the direction of the arrow until it is completely removed.
Insert 2 AA batteries (1.5V) in the correct +/- polarity. Slide the battery cover back into position.
Using the Hidden Buttons
Remote Control Button
SOUND
SOURCE
Hidden Button
Function
TV remote control On/Off
Reference page
Page 11
p (Play / Pause)
BT Paring
Page 28
Auto Power Down On/Off (AUX mode)
Page 27
Up
ID SET
Page 20
WIFI SETUP
Page 9
ADD SPEAKER
Page 9
Auto Power Link On/Off
Page 23
Anynet+ On/Off
Page 9
7 Band EQ
Page 11
VOL
Down
Left
Right
(Sound Control)
EFFECT
LEVEL
DRC On/Off
Page 9
Network Standby On/Off
Page 32
12
DESCRIPTIONS
Input
2 ch
5.1 ch
2 ch
5.1 ch
2 ch
5.1 ch
2 ch
5.1 ch
2 ch
5.1 ch
SOUND
Effect
SOURCE
ON
SOUND
SOURCE
SOUND
SOURCE
EFFECT
LEVEL
SOUND
SOURCE
5.1.4 ch
2.1 ch
5.1 ch
2.1 ch
MUSIC
EFFECT
VOL
SOUND
SOURCE
SOUND
VOL
EFFECT
VOL
5.1 ch
LEVEL
WOOFER
SOURCE
SPORTS
WOOFER
LEVEL
WOOFER
MOVIE
EFFECT
VOL
3.1 ch
CLEAR
LEVEL VOICE
EFFECT
EFFECT
VOL
5.1 ch
LEVEL
WOOFER
LEVEL
WOOFER
2 ch
5.1 ch
5.1.4 ch
STANDARD
2 ch
5.1 ch
Output
5.1.4 ch
5.1.4 ch
5.1.4 ch
5.1.4 ch
NIGHT
EFFECT
VOL
LEVEL
WOOFER
* If the input source is Dolby Atmos®, 5.1.4 channel is outputted. The sound effect is not available.
VOL
WOOFER
13
3.1 ch
5.1 ch
ENG
Output specifications
forSOURCE
the different modes of
SOUND
sound effect
INSTALLATION
INSTALLATION
Installing the Soundbar
Installing the Wall Mount
++Installation Precautions
●● Install on a vertical wall only.
●● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of
the set.
●● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the
unit on a different wall that can support the unit's weight.
●● Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board,
iron board, wood, etc.). If possible, fix the support screws into wall studs.
●● Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
-- Diameter: M5
-- Length: 35 mm or longer recommended.
●● Connect cables from the unit to external devices before you install it on the wall.
●● Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
5 cm or more
1. Place the Wall Mount Guide against the wall surface.
• The Wall Mount Guide must be level.
• If the TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.
14
INSTALLATION
ENG
C
CENTER LINE
C
C TYPE : 700mm
Centre Line
2. Align the Paper Template’s Centre Line with the centre of your TV (if you are mounting the Soundbar below your
TV), and then fix the Wall Mount Guide to the wall using tape.
●● If you are not mounting below a TV, place the Centre Line in the centre of the installation area.
C
CENTER LINE
C
C TYPE : 700mm
C
B
3. Push a pen tip or sharpened pencil tip through the centre of the C-TYPE images on each end of the Guide to
mark the holes for the supporting screws, and then remove the Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in the wall at each marking.
●● If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or
mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the
holes you drill are large enough for the anchors or mollies you use.
5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support
screw hole.
15
INSTALLATION
6. Install 2 Bracket-Wall Mounts in the right orientation on the bottom of the Soundbar, using 2 Screws (M4 x L12).
Rear of the
Soundbar
Right end of the Soundbar
●● When assembling, make sure the hanger parts of the Bracket-Wall Mounts are located behind the rear
of the Soundbar. See the illustration above.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the
Holder-Screws on the wall.
16
INSTALLATION
ENG
8. Slide the Soundbar down as shown above so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
●● Slide the Bracket-Wall Mounts down from the bottom to install it onto the Holder-Screws.
Detaching the Soundbar from the Wall
1. To separate the Soundbar from the wall mount, push it in the direction of arrow.
●● Do not hang onto the installed unit and avoid striking or dropping the unit.
●● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or
damage the product.
●● When the unit is installed on a wall, please make sure that children do not pull any of the connecting
cables, as this may cause it to fall.
●● For the optimal performance of a wall mount installation, install the speaker system at least 5 cm below the
TV, if the TV is mounted on the wall.
●● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely
to fall.
17
INSTALLATION
Installing the Surround
Speakers on a Wall
You can purchase wall mounts separately to install the surround speakers on a wall.
++Considerations for purchasing
●● Endurable load : Above 8.0 Kg
●● Hole size : 1/4 - 20 threaded insert
●●
●●
●●
●●
Since wall mount installation is optional, you must purchase the corresponding accessories separately.
Please have a qualified installer install the surround speaker Wall Mount Brackets.
Ask a professional installation company to mount your product on the wall.
Check the strength of the wall before you install the Wall Mount Brackets. If the strength is insufficient, make
sure to reinforce the wall before installing the Wall Mount Brackets and the speakers on the wall.
●● For more information, please refer to the Wall Mount's manual.
●● Samsung Electronics is not liable for any damage to the product due to the product being installed
inappropriately.
●● Take care not to install the speakers sideways or upside down.
18
CONNECTIONS
CONNECTIONS
●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
●● If the main unit is powered off, the wireless subwoofer and surround speaker will go into stand-by mode
and the STANDBY LED on the rear will be Red after blinking Blue several times.
●● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
●● The maximum transmission distance of the wireless signal of the main unit is about 10 meters, but may
vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit
and the wireless subwoofer or surround speaker, the system may not operate at all, because the wireless
signal cannot penetrate metal.
●● Wireless receiving antennas are built into the wireless subwoofer and surround speakers. Keep the units
away from water and moisture.
●● For optimal listening performance, make sure that the area around the wireless subwoofer and surround
speakers location is clear of any obstructions.
Recommended Speaker Layout
TV
Soundbar Main Unit
Subwoofer
90°
90°
110°
110°
Surround Speaker L
Surround Speaker R
19
ENG
Connecting the Subwoofer and
Surround Speakers
CONNECTIONS
Automatic Connection
1. Connect a power supply to the subwoofer and surround sound speakers.
2. Connect a power supply to the Soundbar, and then press the
of the Soundbar.
button on the remote control or on the right side
3. The subwoofer and surround sound speakers are automatically connected to the Soundbar.
4. When auto pairing is complete, the blue indicators at the rear of the subwoofer and surround speakers turn on.
●● If the red indicator at the rear of the subwoofer or surround speakers is on or the blue indicator flashes
continuously, auto pairing cannot occur. If this happens, connect each of the speakers manually.
●● You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9.)
●● Important: Before you begin, put the batteries into the remote. See page 12 for instructions.
LINK
STANDBY
ID SET
LINK
POWER
LINK
STANDBY
LINK
ID SET
Rear of Subwoofer
Rear of Surround Speaker
Connecting the Subwoofer and Surround Speakers
Manually if the Automatic Connection Fails
++Before You Begin
●● Make sure that the Soundbar, the subwoofer, and the surround speakers are plugged in.
●● Make sure that the Soundbar is turned on.
1. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds. The red
indicator at the rear of each speaker turns off and the blue indicator blinks.
POWER
POWER
POWER
POWER
LINK
LINK
POWER
LINK
POWER
LINK
LINK
STANDBY
STANDBY
LINK
STANDBY
STANDBY
ID SET
ID SET
STANDBY
STANDBY
ID SET
ID SET
LINK
LINK
STANDBY
STANDBY
ID SET
ID SET
ID SET
ID SET
Rear of Subwoofer
Rear of the Left and Right Surround Speakers
20
CONNECTIONS
LE
VE
L
LE
VE
L
2. Turn off the Soundbar.
W
O
O
FE
R
FE
CT
R
EF
N
D
BA
SO
U
VO
L
N
D
BA
SO
U
VO
L
R
T
ENG
W
O
O
FE
R
3. Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).
L
LE
VE
LE
VE
L
4. The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.
R
W
O
O
FE
FE
CT
Right Side of the Soundbar
BA
R
EF
BA
R
T
W
O
O
FE
R
ID SET
D
N
SO
U
VO
L
D
N
SO
U
VO
L
5. When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by pressing
button on the right side of the main unit or on the remote control.
6. When the connection is successfully established, the blue indicators on the rear of the subwoofer and surround
speakers turn on without blinking.
●● If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
LED indicator lamp status on subwoofer and
surround sound speakers
LED
Red
Status
On
On
Blue
Red and blue
Blinking
Blinking
Description
Resolution
Standby (with the Soundbar main
unit turned off)
Check the power supply to the
Soundbar main unit
Connection failed
Connect again
(refer to the instructions on manual
connection in the user manual)
Successfully connected
(normal operation)
-
Standby (with the Soundbar main
unit turned off)
Check the power supply to the
Soundbar main unit
Connection failed
Connect again
(refer to the instructions on manual
connection in the user manual)
Malfunction
Contact the service centre.
21
CONNECTIONS
Connecting to a TV
●● Important: Before you begin, put the batteries into the remote. See page 12 for instructions.
Connecting to a TV Using an HDMI (Digital) Cable
HDMI Cable
(not supplied)
HDMI IN
AUX IN
HDMI OUT
(TV-ARC)
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
HDMI OUT
(TV-ARC)
DC 19V
Wi-Fi SETUP
SPK ADD
SERVICE
HDMI IN 2
SOUND
SOUND
SOURCE
SOURCE
1. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the bottom of the product to the
HDMI IN jack on your TV.
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the D.IN mode.
●● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
●● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
●● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
●● Anynet+ must be turned on.
●● This function is not available if the HDMI cable does not support ARC.
22
CONNECTIONS
Connecting to a TV Using a Digital Optical Cable
ENG
Optical Cable
(not supplied)
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
AUX IN
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
DIGITAL AUDIO IN
(OPTICAL)
SOUND
SOUND
SOURCE
SOURCE
DC 19V
Wi-Fi SETUP
SPK ADD
SERVICE
HDMI IN 2
1. Connect the DIGITAL AUDIO IN (OPTICAL) (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the D.IN mode.
++Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the
D.IN mode.
button on the main unit’s right side or the SOURCE button on the remote control to select the
3. Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off.
●● Auto Power Link is set to ON by default.
●● Depending on the connected device, Auto Power Link may not function.
●● This function is only available in the D.IN mode.
23
CONNECTIONS
Connecting to External Devices
HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top boxes,
and more.
HDMI prevents any degradation to the signal due to conversion to analogue and maintains the video and audio
quality of the original digital source.
Connecting Devices in Order to Use Dolby Atmos®
This product supports Dolby Atmos®.
●● Important: Dolby Atmos® is available only in HDMI mode.
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
HDMI Cable
(not supplied)
HDMI OUT
(TV-ARC)AUDIO IN
DIGITAL
(OPTICAL)
HDMI IN
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
HDMI IN 1
HDMI OUT
(TV-ARC)
DC 19V
Wi-Fi SETUP
HDMI IN 2
SPK ADD
SERVICE
HDMI IN 2
HDMI IN 1
Or
Digital Devices
HDMI OUT
SOUND
SOUND
SOURCE
SOURCE
HDMI IN 2
HDMI Cable
(not supplied)
1. Connect an HDMI cable (not supplied) from the HDMI IN 1 or HDMI IN 2 jack on the back of the product to the
HDMI OUT jack on your digital device.
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the HDMI1 or HDMI2 mode.
3. The selected HDMI mode is displayed on the Soundbar display panel and sound plays.
●● When Dolby Atmos® operated, the Blue LED on the right edge of the Soundbar will turn on and glow.
24
CONNECTIONS
4. Configuring Dolby Atmos® on your BD player, or other device.
• Check the audio output options using the settings menu on your BD player, or other device.
• If the Audio Output options include Secondary Audio, make sure it is set to Off.
●● Dolby Atmos® works only in HDMI mode. It is not compatible with other input sources.
●● Dolby Atmos® works only on 5.1.4 channels.
●● Make sure that the content supports Dolby Atmos®.
HDMI Cable
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
HDMI Cable
(not supplied)
HDMI IN
HDMI OUT
(TV-ARC)AUDIO IN
DIGITAL
(OPTICAL)
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
HDMI IN 1
HDMI OUT
(TV-ARC)
DC 19V
Wi-Fi SETUP
HDMI IN 2
SPK ADD
SERVICE
HDMI IN 2
Or
Digital Devices
HDMI OUT
HDMI Cable
(not supplied)
HDMI IN 1
SOUND
SOUND
SOURCE
SOURCE
HDMI IN 2
1. Connect an HDMI cable (not supplied) from the HDMI IN 1 or HDMI IN 2 jack on the back of the product to the
HDMI OUT jack on your digital device.
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the HDMI1 or HDMI2 mode.
3. The selected HDMI mode is displayed on the Soundbar display panel and sound plays.
25
ENG
• Make sure that "No Encoding" is selected for bitstream in the audio output options.
e.g., On a Samsung Player: Home menu  Settings  Sound  Digital Output: Select Bitstream (unprocessed).
CONNECTIONS
Optical or Analogue Audio Cable
This unit comes equipped with one digital optical in jack and one analogue audio (AUX) in jack, giving you two
ways to connect it to external devices.
Optical Cable
(not supplied)
OPTICAL OUT
BD / DVD player /
Set-top box /
Game console
Audio Cable
(not supplied)
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
AUX OUT
SOUND
SOUND
SOURCE
SOURCE
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
DC 19V
Wi-Fi SETUP
SPK ADD
SERVICE
HDMI IN 2
++AUX Cable
1. Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable.
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the AUX mode.
++Optical Cable
1. Connect DIGITAL AUDIO IN (OPTICAL) (Audio) on the main unit to the OPTICAL OUT jack of the Source Device
using a digital optical cable.
button on the right side of the Soundbar or the SOURCE button on the remote control to select
2. Press the
the D.IN mode.
26
FUNCTIONS
FUNCTIONS
Input Mode
SOUND
Right Side of the Soundbar
Input mode
SOURCE
SOURCE
Display
Optical Digital input
D.IN
ARC (HDMI OUT) input
AUX input
HDMI input
SOUND
AUX
HDMI1, HDMI2
BLUETOOTH mode
BT
Auto Power Down Function
The unit turns off automatically in the following situations.
●● D.IN / BT Mode
-- If there is no audio signal for 5 minutes.
●● HDMI1 / HDMI2 Mode
-- If there is no audio signal for 15 minutes.
●● AUX Mode
-- If the AUX cable is disconnected for 5 minutes.
-- If there is no KEY input for 8 hours when the AUX cable is connected. (Auto Power Down function can be
turned off only in that case.)
To turn off Auto Power Down function, while in AUX mode, press and hold the p button for 5 seconds.
ON - AUTO POWER DOWN / OFF - AUTO POWER DOWN appears on the display.
27
ENG
button on the main unit’s right side or the SOURCE button on the remote control to select the mode
Press the
you want.
FUNCTIONS
Bluetooth
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
Bluetooth device
1. Press the
mode.
button on the main unit’s right side or the SOURCE button on the remote control to select the BT
• You will see BT READY or BT PAIRING on the front display of the Soundbar.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user
manual.)
3. Select "[AV] Samsung Soundbar Kxxx" from the list.
• When the Soundbar is connected to the Bluetooth device, it will display [Bluetooth device name]  BT on
the front display.
• The device name can only be displayed in English. An underline " _ " will be displayed if the name is not in
English.
• If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[AV] Samsung Soundbar
button
Kxxx" found by the Bluetooth device, switch to BT PAIRING mode by pressing and holding the
on the main unit’s right side or the SOURCE button on the remote control, and then have the Bluetooth device
search for the Soundbar again.
4. Play music on the connected device.
• You can listen to the music playing on the connected Bluetooth device over the Soundbar.
• In BT mode, the Play / Pause / Next / Prev functions are not available. However, these functions are available
on Bluetooth devices supporting AVRCP.
●●
●●
●●
●●
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired at a time.
The Bluetooth connection will be terminated when you turn the Soundbar off.
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
-- If there is a strong electrical field around the Soundbar.
-- If several Bluetooth devices are simultaneously paired with the Soundbar.
-- If the Bluetooth device is turned off, not in place, or malfunctions.
●● Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device, which can cause electric interference.
28
FUNCTIONS
The Soundbar supports SBC data (44.1kHz, 48kHz).
Connect only to a Bluetooth device that supports the A2DP (AV) function.
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
Once you have paired the Soundbar to a Bluetooth device, selecting "[AV] Samsung Soundbar Kxxx"
from the device's scanned devices list will automatically change the Soundbar to BT mode.
-- Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
●● Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying
BT PAIRING.
To disconnect a Bluetooth device from the
Soundbar
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
●● The Soundbar will be disconnected.
●● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCONNECTED on the front display.
To disconnect the Soundbar from A Bluetooth
device
Press the SOURCE button on the remote control or the
another mode or turn off the Soundbar.
button on the product's right side to switch from BT to
●● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
●● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
●● The Soundbar automatically turns off after 5 minutes in the Ready state.
++More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a
short wireless connection.
●● A Bluetooth device may cause noise or malfunction, depending on usage, if:
-- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-- It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
●● Pair the Soundbar with the Bluetooth device while they are close together.
●● The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●● In poor reception areas, the Bluetooth connection may not work properly.
●● The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as
walls or doors.
●● This wireless device may cause electric interference during its operation.
29
ENG
●●
●●
●●
●●
FUNCTIONS
Using the Multiroom App
The Samsung Multiroom app lets you connect the Soundbar to a smart device, your network, and the Internet. Once
the Soundbar is connected to a smart device that has the Multiroom App installed, you can also connect the
Soundbar and multiple Samsung Multiroom devices together wirelessly and play audio through them.
Before you begin
++Communication Basics
Internet
Wireless Router
Smart Device:
Android or iOS
(App Control)
Requirements:
1. A Wireless Router and a Smart Device.
2. The wireless router must be connected to the Internet.
3. The smart device must be connected to the router via a Wi-Fi connection.
Installing the Samsung Multiroom App
To use the Soundbar with the Samsung Multiroom App, you must download and then install the Samsung Multiroom
App on your smart device. You can download the app from Google Play or the App Store. With the Samsung
Multiroom App installed, you can play music on your Soundbar that is stored on your smart device, located on other
connected devices, provided by other content providers, or streamed from Internet radio stations.
++Android or iOS
Download the Samsung Multiroom app from Google Play or the App Store of your smart device.
* Market search : Samsung Multiroom
or
30
FUNCTIONS
++Launching the Samsung Multiroom App
To launch the Samsung Multiroom app, tap the Multiroom app icon on your smart device.
ENG
Connecting the Soundbar to Your Network
On your smart device, select the Samsung Multiroom app. Follow the directions on your smart device’s screen.
You can use the following music sources with the Samsung Multiroom app.
-- Music files stored in your mobile phone, various music sources, and Internet radio.
[AV] Samsung Soundbar Kxxx
Music in mobile phone
Internet radio
Music service
31
FUNCTIONS
Using the Network Standby On
Function
The Network Standby On function becomes available if a wireless connection has been properly established between
a smart device and the Soundbar. This function turns on the Soundbar automatically when a smart device attempts to
connect to the Soundbar via Bluetooth or Wi-Fi. If you turn the Soundbar on via a Bluetooth connection, its input
mode is set to BT automatically. To turn the Soundbar on via Wi-Fi, you must have the Samsung Multiroom App
installed on your smart device.
1. Connect the smart device to your Soundbar.
2. Turn on the Network Standby On function by pressing the LEVEL button on the Soundbar's remote for more than
5 seconds. You can turn the function off by pressing the LEVEL button again for more than 5 seconds.
●● Network Standby On is available only if the Soundbar is listed among the smart device’s paired devices.
(The Smart device and the Soundbar must have been previously paired at least once.)
●● Soundbar will appear in the smart device’s searched devices list only when the Soundbar is displaying [BT
READY] or [WiFi READY].
●● If the Network Standby On function did not work:
-- The Network Standby On is set to Off. Set it to ON.
●● The Wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is disconnected or
the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
32
FUNCTIONS
Software Update
HDMI OUT
(TV-ARC)
HDMI IN 1
DC 19V
Wi-Fi SETUP
SPK ADD
SERVICE
HDMI IN 2
SERVICE
Micro USB to
USB adapter Cable
(not supplied)
Updating with USB
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it
to the USB port on your Soundbar.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the
firmware one file at a time.
Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update
files.
++Updating Procedure
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a
standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
●● The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre
or Samsung Customer Care.
2. Follow the steps below to download the product software:
Go to the Samsung website at (samsung.com/sec)  search for the model name - select the customer support
option (the option name is subject to change)
3. Save the downloaded software to a USB stick and select "Extract to the folder name" to unzip the folder.
4. Turn off the Soundbar and connect the USB stick containing the software update to the female port on a Micro
USB adapter cable.
5. Turn on the Soundbar. Within 3 minutes, UPDATE is displayed and updating begins.
6. After the update is complete, the Soundbar turns off and on again.
●● If the input source has been changed after an update or a reconnection of the power cable, change the
input source to TV, or the desired source.
33
ENG
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
DC 19V
FUNCTIONS
++If UPDATE was not displayed
1. Turn off the Soundbar, connect the USB storage device that contains update files to the Soundbar’s USB port.
2. Disconnect the power cord, reconnect it, and then turn on the Soundbar.
●● Insert a USB device containing the firmware update into the USB port on the main unit.
●● Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB
storage device.
●● Do not disconnect the power or remove the USB device while updates are being applied. The main unit will
turn off automatically after completing the firmware update.
●● After update is completed, the user setup in Soundbar is initialised. We recommend you write down your
settings so that you can easily reset them after the update. Note that updating firmware resets the
subwoofer connection too.
If the connection to the subwoofer is not re-established automatically after the update, refer to page 19.
If the software update fails, check that the USB stick is not defective.
●● Mac OS users should use MS-DOS (FAT) as the USB format.
●● Depending on the manufacturer, some USB devices may not be supported.
Auto update
If the Soundbar is connected to the Internet, it will automatically check for the latest firmware and update when new
firmware becomes available, even if it is turned off.
●● The Soundbar is configured to run Auto Update by default.
●● To use the Auto Update function, the Soundbar must be connected to the Internet.
●● The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is
cut off. If the power is cut off, turn on the Soundbar and reconnect it.
34
TROUBLESHOOTING
Troubleshooting
TROUBLESHOOTING
ENG
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼¼Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼¼Disconnect the power plug and connect it again.
Sound is not produced.
¼¼Press the VOL button to cancel the Mute function.
• Is the Mute function on?
• Is the volume set to minimum?
¼¼Adjust the volume.
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main
unit too far?
¼¼Replace with new batteries.
¼¼Move closer to the unit.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
¼¼Try to connect your subwoofer again.
(See Page 19)
• Your subwoofer may not be connected to the
main unit of the product.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
35
¼¼Push the WOOFER button on your remote control
up or down to adjust its value (between -12, -6 ~ +6).
APPENDIX
APPENDIX
Specifications
Weight
GENERAL
Dimensions
(W x H x D)
Main Unit
6.7 kg
Surround Speaker
(PS-KS2-1 (L), PS-KS2-2 (R))
2.0 kg
Subwoofer (PS-KW1-2)
Main Unit
1210.2 x 81.7 x 131.4 mm
Surround Speaker
(PS-KS2-1 (L), PS-KS2-2 (R))
120.2 × 210.9 × 141.0 mm
Subwoofer (PS-KW1-2)
AMPLIFIER
203.9 x 399.0 x 414.3 mm
Operating Temperature Range
+5°C to +35°C
Video
1080p,1080i, 720p, 576p, 480p
2160p@24/25/30Hz 4:4:4
2160p@60/50Hz 4:2:0
Operating Humidity Range
HDMI
9.6 kg
Rated Output
Power
10 % to 75 %
Main Unit
Subwoofer (PS-KW1-2)
Surround Speaker
(PS-KS2-1 (L), PS-KS2-2 (R))
18W x 11, 4 ohm, THD≦10%
162W, 3 ohm, THD≦10%
35W x 4, 4 ohm, THD≦10%
* Design, specifications and App screen are subject to change without prior notice.
* Nominal specification
-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-- Weight and dimensions are approximate.
-- For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of main unit)
aa Precaution : The product will restart automatically if you turn on/off Wi-Fi/Ethernet.
Overall Standby Power Consumption (W)
(All the network ports are “ON” condition)
5.8W
Wi-Fi/Ethernet
Port deactivation method
Press Wi-Fi SETUP button on the product for
30 seconds to turn Wi-Fi/Ethernet On / Off.
Bluetooth
Port deactivation method
Press SPK ADD button on the product for
30 seconds to turn Bluetooth On / Off.
aa Open Source Licence Notice
-- For further information on Open Sources used in this product, please visit the website:
http://opensource.samsung.com
aa
Licence
-- The Spotify Software is subject to third party licences found here :
www.spotify.com/connect/third-party-licenses.
-- For more information about Spotify Connect, please visit www.spotify.com/connect
36
APPENDIX
Licences
For DTS patents, see http://patents.dts.com. Manufactured under licence from DTS Licencing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licencing LLC in the United States and other countries.
Wireless Models (including the frequency of 5.15GHz-5.35GHz)
Hereby, Samsung Electronics, declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
Wireless Models (excluding the frequency of 5.15GHz-5.35GHz)
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
37
ENG
Manufactured under licence from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, Dolby Digital Plus, Pro Logic,
and the double-D symbol are trademarks of Dolby Laboratories.
UNITED
UNITED
KINGDOM
KINGDOM
UNITED
KINGDOM
EIRE
EIRE EIRE
beyond
beyondthe
thecontrol
control
Samsung.
Samsung.
his
s Samsung
Samsung
product
product
isiswarranted
warranted
forwarranted
the
theperiod
periodfor
ofoftwelve
twelve
(12)
(12)ofmonths
months
fromthe
theorigiorigibeyondofofthe
control of
This
Samsung
product for
is
the
period
twelvefrom
(12)
months
from the origi4.
product
not 6.
considered
to be
defective
in
This
product
is warranted
for
the
period and
of workmanship.
aldate
dateofofpurchase,
purchase,
against
defective
defective
materials
materials
and
and
workmanship.
workmanship.
InInthe
theThis
event
event
that
that
6.that
This
Thiswarranty
warranty
isisvalid
valid
for
forany
any
person
person
nal Samsung
date against
of
purchase,
against
defective
materials
In theisevent
6. This
warranty
is valid
forw
materials
nor
workmanship
by
reason
that
it
requires
twelve
months
the return
original
date
of
purchase,
arranty
rranty service
service
isis(12)
required,
required,
you
you
should
should
return
the
the
product
product
toto
the
the
retailer
retailerto
from
from
whomititfrom whom
possession
possession
ofof
the
theproduct
product
during
the
the
warranty
service
isfrom
required,
you should
return
the
product
thewhom
retailer
it
possession
ofduring
the produc
as
s purchased.
purchased.
However,
Samsung
Samsung
Authorised
Authorised
Dealers
Dealers
and
and
Authorised
Service
Service
Centres
Centres
7.
The
Theconsumers
consumers
statutory
statutory
rights
ininany
anyar
adaptation
inService
order 7.
to
conform
to 7.
national
or localrights
wasHowever,
purchased.
However,
Samsung
Authorised
Dealers
and
Authorised
Centres
The
consumers
statutory
against
defective
materials
and
workmanship.
InAuthorised
the
other
otherEC
ECCountries
Countries
will
willCountries
comply
comply
with
with
the
warranty
warranty
onthe
the
terms
termsissued
issued
totechnical
purchasers
purchasers
ininpurchasers
the
theretailer
retailer
arising
arising
from
from
the
thepurchase
purchase
c
in other
willthe
comply
with on
the
warranty
on
the to
terms
issued
inin force
the
retailer
arising
from th
or to
safety
standards
in any
Country
event
thatEC
warranty
service
is required,
you
should
ecountry
countryconcerned.
concerned.
InInconcerned.
case
caseto
ofofthe
difficulty,
difficulty,
details
ofofour
ourAuthorised
Service
Service
Centres
Centres
are
areone
warranty.
Unless
Unless
there
there
isisnational
national
legis
legi
the country
In
casedetails
of difficulty,
details
Authorised
Service
Centres
arethe product
warranty.
Unless
there
is
other
than
the
for warranty.
which
was
originally
return
the product
retailer
from
whom
itAuthorised
was of our
ailable
ailablefrom:
from:
warranty
warrantyare
arethe
theconsumers
consumers
sole
sole
rights
right
available from:
warranty
are the
consume
designed and anufactured. This warranty will not cover,
purchased. However, Samsung Authorised Dealers
tors
torsshall
shallnot
notbe
beliable
liable
forindirect
indirect
ororfor
con
co
tors
shallfor
not
be liable
and
no
re-imbursement
will
be
made
for
such
and Authorised
Service
Centres
inU.K.
other
EC
Countries
Samsung
Samsung
Electronics
Electronics
U.K.
U.K.
Ltd.
Ltd.Customer
Customer
Care
Care
CentrePO
CentrePO
Box
Box
479
479 Box 479 compact
compactdiscs,
discs,
videos
videosdiscs,
ororaudio
audio
taper
taper
Samsung
Electronics
Ltd.
Customer
Care
CentrePO
compact
videos
ororoa
adaptation nor any damage which may result.
GATESHEAD
NE9
NE9on
9BJ
9BJ
United
Kingdom
Kingdom
will complyGATESHEAD
with the warranty
theUnited
terms
GATESHEAD
NE9issued
9BJ
United Kingdom
SAMSUNG
SAMSUNG
ELECT
ELEC
SAMSUN
to purchasers in the country concerned. In case of
5. This warranty covers none of the following:
United
United
Kingdom
Kingdom
United Kingdom
difficulty, details
of our
Authorised
Service Centres
Tel
Tel: :0330
0330SAMSUNG
SAMSUNG
(7267864) (7267864) a) Periodic check ups, maintenance and repair or
Tel : 0330(7267864)
SAMSUNG
are availableFax:
from:03307260001
Fax:
03307260001
Fax: 03307260001
replacement of parts due to normal wear and
www.samsung.com
www.samsung.com
www.samsung.com
tear.
Samsung Electronics U.K. Ltd
b) Cost relating to transport, removal or installation
Eire
Eire Customer
Eire Support Centre
Samsung
Tel
Tel: :0818
081838,
717100
717100
Tel
: 0818 717100
of the product.
Selectapost
Sheffield,
S97 3FJ
Fax:
Fax:+44
+44117
117
915
915+44
6736
6736
Fax:
117 915 6736
c)Misuse, including the faiure to use this product
United Kingdom
www.samsung.com
www.samsung.com
www.samsung.com
for its normal purposes or incorrect installation.
United
Kingdom
d)Damage caused by Lightning, Water, Fire,
WARRANTY
WARRANTY
CONDITIONS
CONDITIONS
■WARRANTY
CONDITIONS
Telvalid
: 0330
SAMSUNG
(7267864)
The
Thewarranty
warranty
isonly
only
valid
if,if,iswhen
when
warranty
warranty
service
service
isisrequired,
required,
the
the
warrantyActs
card
cardof
isisGod,
fully
fully War,
1. is
The
warranty
only
valid
if, when
warranty
service
iswarranty
required,
the
warranty
cardPublic
is fullyDisturbances, incorrect
and
andproperly
properlycompleted
completed
and
and
isispresented
presented
with
the
theoriginal
original
invoice
invoice
ororsales
sales
slip
slip
oror
confirand
properly
completed
andwith
is presented
with
the original
invoice
orconfirsales
slipimproper
or confir- ventilation or any other
mains
voltage,
www.samsung.com/uk/support
mation,
mation,and
andthe
the
serial
serialand
number
number
on
onthe
the
product
product
has
has
not
been
beendefaced.
defaced.
mation,
the serial
number
on
thenot
product
has
not been defaced.
cause beyond the control of Samsung.
Samsung’s
Samsung’s
obligations
are
limited
limitedtotoare
the
thelimited
repair
repairor,
or,the
atatits
its
discretion,
discretion,
replacement
replacement
of
2.obligations
Samsung’s
obligations
to
repair
or, at its
discretion, of
replacement
of
EIREare
the
theproduct
productoror
the
the
defective
defective
part.
part.
the product or the defective part.
6. This warranty is valid for any person who legally
Tel
:
0818
717100
Warranty
Warrantyrepairs
repairs
must
mustrepairs
be
becarried
carried
out
out
by
Authorised
Authorised
Samsung
Dealers
Dealers
oror Dealers
3.
Warranty
must
beby
carried
out bySamsung
Authorised
Samsung
or of the product during the
acquired
possession
Authorised
AuthorisedService
Service
Centres.
Centres.
No
Nore-imbursement
re-imbursement
will
willbe
bemade
madewill
for
forrepairs
repairs
carried
carried
www.samsung.com/ie/support
Authorised
Service
Centres.
No re-imbursement
be
made
for
repairs carried
warranty
period.
out
outby
bynon
nonSamsung
Samsung
Dealers
Dealers
and,
and,Dealers
any
anysuch
such
repair
repair
work
and
damage
damage
totothe
the
prodprod- to the prodout by non
Samsung
and,
anywork
suchand
repair
work and
damage
ucts
uctscaused
causedby
bysuch
such
repair
repair
work
will
not
notwork
be
becovered
covered
by
this
warranty.
warranty.
ucts
caused
bywork
suchwill
repair
will notby
bethis
covered
by The
thisconsumers
warranty. statutory rights in any applicable
7.
This
Thisproduct
product
is
isnot
notproduct
considered
considered
be
bedefective
defective
inmaterials
materials
nor
workmanship
workmanship
by
bylegislation whether
This
is nottotoconsidered
to in
be
defectivenor
in materials
nor workmanship
by
national
against the retailer arising
@4.WARRANTY
CONDITIONS
reason
reasonthat
thatititreason
requires
requires
adaptation
adaptation
ininadaptation
order
ordertotoconform
conform
tototo
national
national
ororto
local
local
technical
technical
that
it requires
in order
conform
national
local technical
from theorpurchase
contract or otherwise are not
ororsafety
safety1.
standards
standards
ininforce
force
ininany
any
Country
other
than
than
the
the
one
one
forwhich
which
the
thefor
product
product
or safety
standards
inCountry
force
in other
any
Country
other
than
the one
which the product
The
warranty
is only
valid
if, when
warranty
service
is for
by
this and
warranty.
was
wasoriginally
originally
designed
designed
and
manufactured.
manufactured.
This
This
warrantyThis
will
willnot
notcover,
cover,affected
and
and
no
nocover,
rerewas
originally
designed
manufactured.
warranty
will
not
no re-Unless there is national
required,
theand
warranty
cardand
is fully
and warranty
properly
legislation
to the
contrary,
the rights under this
mbursement
imbursementimbursement
will
willbe
bemade
madefor
forsuch
such
adaptation
adaptation
nor
nor
any
anydamage
damage
which
which
may
mayresult.
result.
will
be
made
for
such
adaptation
nor
any
damage
which
may
result.
completed and is presented with the original invoice or
This
Thiswarranty
warranty
covers
covers
none
nonecovers
ofofthe
thefollowing:
following:
warranty are the consumers sole rights and Samsung,
5. This
warranty
none
of the following:
sales
slip
or maintenance
confirmation,
therepair
serial or
number
on or replacement
a)a)Periodic
Periodiccheck
check
ups,
ups,
maintenance
and
and
repair
orand
replacement
replacement
ofofparts
parts
due
dueto
toparts
a) Periodic
check ups,and
maintenance
repair
of
to
its subsidiaries
anddue
distributors
shall not be liable for
the product
has
notand
been
defaced.
normal
normalwear
wear
and
andtear.
tear.
normal
wear
tear.
indirect or consequential loss or any damage to
b)b)Cost
Costrelating
relating
totransport,
transport,
removal
removal
ororinstallation
installation
ofofinstallation
the
theproduct.
product.
b) to
Cost
relating
to
transport,
removal
or
2. Samsung’s
obligations
are limited
to the repair
or, at its of the product.
records, compact discs, videos or audio taper or any
c)c)Misuse,
Misuse,including
including
the
thefaiure
faiuretotouse
usethis
thisproduct
product
for
its
itsproduct
normal
normalfor its normal
c) Misuse,
including
the
faiure
to usefor
this
discretion,
replacement
of
the
product
or
the
defective
other related equipment or material.
purposes
purposesororincorrect
incorrect
installation.
purposesinstallation.
or incorrect installation.
part.
d)d)Damage
Damagecaused
caused
by
byLightning,
Lightning,
Water,
Water,
Fire,
Fire,Acts
ActsofofGod,
God,Acts
War,
War,of
Public
Public
d) Damage
caused by
Lightning,
Water,
Fire,
God, War, Public
SAMSUNG
(U.K.) LTD.
Disturbances,
Disturbances,
incorrect
incorrectmains
mains
voltage,
voltage,
improper
improper
ventilation
ventilation
ororventilation
any
anyother
othercause
cause
Disturbances,
incorrect
mains
voltage,
improper
or
anyELECTRONICS
other cause
3. Warranty repairs must be carried out by Authorised
Samsung Dealers or Authorised Service Centres. No
-2-2-2re-imbursement will be made for repairs carried out by
non Samsung Dealers and, any such repair work and
damage to the products caused by such repair work
will not be covered by this warranty.
©2016 Samsung Electronics Co.,Ltd. All rights reserved
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
Centre.
Country
` Europe
Contact Centre 
U.k
EIRE
0330 SAMSUNG (7267864)
0818 717100
0180 6 SAMSUNG bzw.
0180 6 7267864*
GERMANY
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
FRANCE
01 48 63 00 00
ITALIA
800-SAMSUNG (800.7267864)
SPAIN
34902172678
PORTUGAL
808 20 7267
LUXEMBURG 261 03 710
0900-SAMSUNG (0900-7267864)
NETHERLANDS
(€ 0,10/Min)
Web Site
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/de/support
www.samsung.com/fr/support
www.samsung.com/it/support
www.samsung.com/es/support
www.samsung.com/pt/support
www.samsung.com/be_fr/support
www.samsung.com/nl/support
www.samsung.com/be/support
(Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/no/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/se/support
BELGIUM
02-201-24-18
NORWAY
DENMARK
Finland
SWEDEN
815 56480
70 70 19 70
030-6227 515
0771 726 7864 (0771-SAMSUNG)
801-172-678* lub +48 22 607-93-33 *
www.samsung.com/pl/support
* (koszt połączenia według taryfy operatora)
0680SAMSUNG (0680-726-786)
www.samsung.com/hu/support
0680PREMIUM (0680-773-648)
POLAND
HUNGARY
[Correct disposal of batteries in this product]
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
Country
AUSTRIA
Contact Centre 
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
Switzerland 0800 726 78 64 (0800-SAMSUNG)
CZECH
SLOVAKIA
CROATIA
BOSNIA
MONTENEGRO
SLOVENIA
SERBIA
BULGARIA
ROMANIA
CYPRUS
GREECE
LITHUANIA
Latvia
ESTONIA
800 - SAMSUNG (800-726786)
0800 - SAMSUNG (0800-726 786)
072 726 786
055 233 999
020 405 888
080 697 267 (brezplačna številka)
011 321 6899
*3000 Цена в мрежата
0800 111 31 , Безплатна телефонна линия
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG)
Apel GRATUIT
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only
from land line (+30) 210 6897691 from
mobile and land line
8-800-77777
8000-7267
800-7267
Web Site
www.samsung.com/at/support
www.samsung.com/ch/support
(German)
www.samsung.com/ch_fr/
support (French)
www.samsung.com/cz/support
www.samsung.com/sk/support
www.samsung.com/hr/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/si
www.samsung.com/rs/support
www.samsung.com/bg/support
www.samsung.com/ro/support
www.samsung.com/gr/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g.
REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Download PDF

advertising