Samsung | HW-K430 | Samsung HW-K430 Wireless Soundbar with Bass Reflex Subwoofer User Manual

HW-K430
User manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
©2016 Samsung Electronics Co.,Ltd. All rights reserved
GETTING STARTED
GETTING STARTED
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for
further safety related information.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power
plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must
be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required,
it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the
fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is
no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a
mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly
into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN
or RED.
WARNING : D
O NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
2
GETTING STARTED
PRECAUTIONS
99.1mm
99.1mm
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker
located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space
around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or
other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect
the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage
the unit.
Do not expose the unit to direct sunlight or other heat
sources. This could lead to overheating and cause the
unit to malfunction.
Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the power
cable from the AC supply if the unit malfunctions. Your
product is not intended for industrial use. It is for
personal use only. Condensation may occur if your
product has been stored in cold temperatures. If
transporting the unit during the winter, wait approximately
2 hours until the unit has reached room temperature
before using.
The batteries used with this product contain chemicals
that are harmful to the environment. Do not dispose of
batteries in the general household trash. Do not dispose
of batteries in a fire. Do not short circuit, disassemble, or
overheat the batteries. There is a danger of explosion if
the battery is incorrectly replaced. Replace only with the
same or equivalent type.
WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. The remote control supplied
withthis product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away
from children. If the battery compartment does not close securely, stop using the product and keep it
away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
3
ENG
68.6 mm
99.1mm
GETTING STARTED
CONTENTS
2 GETTING STARTED
25FUNCTIONS
5
26Bluetooth
2
Safety Information
What’s Included
6DESCRIPTIONS
6
Front / Right Side Panel
8
Remote Control
7
Bottom Panel
11INSTALLATION
11
Installing the Soundbar
15
Detaching the Soundbar from the Wall
11
25
Input Mode
30
Software Update
32TROUBLESHOOTING
32Troubleshooting
33APPENDIX
33Specifications
Installing the Wall Mount
●● Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
16CONNECTIONS
16
Connecting the Subwoofer
20
Connecting to a TV
18
20
21
22
22
●● An administration fee may be charged if either
(a) an engineer is called out at your request and
there is no defect with the product (i.e. where
the user manual has not been read).
(b) you bring the unit to a repair centre and there is
no defect with the product (i.e. where the user
manual has not been read).
Connecting the SWA-8000S
(Sold Separately)
Connecting to a TV Using a Digital Optical
Cable
●● You will be informed of the administration fee
amount before a technician visits.
TV SoundConnect
Connecting to External Devices
Optical or Analogue Audio Cable
23USB
4
GETTING STARTED
WHAT’S INCLUDED
ENG
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
++Icons used in this manual
Icon
Term
Caution
Note
Definition
Indicates a situation where a function does not operate or settings may be cancelled.
Indicates tips or instructions on the page that help you operate a function.
Check for the supplied accessories shown below.
Remote Control /
Lithium Battery
(3V : CR2032)
A
Optical Cable
Screw : 2 EA
AC/DC Adapter
(Main Unit)
Power Cord : 2 EA
B
CENTER LINE
A-TYPE : 616mm
B-TYPE : 360mm
B
A
Wall Mount Guide
Bracket-Wall Mount L
AC/DC Adapter
(Subwoofer)
Holder-Screw : 2 EA
Bracket-Wall Mount R
●● The appearance of the accessories may differ slightly from the illustrations above.
●● Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre or
Samsung Customer Care.
5
DESCRIPTIONS
DESCRIPTIONS
FRONT / RIGHT SIDE PANEL
1
/
(Volume) Button
Controls the volume level.
The numeric value of the volume level appears in the front
panel display.
2
(Source) Button
Selects the D.IN, AUX, BT, TV, or USB input.
button
●● While the unit is powered on, pressing the
for more than 3 seconds sets the button to act as the
(Mute) button. To cancel the
(Mute) button
button for more than 3 seconds
setup, press the
again.
3
(Power) Button
Right Side
2
1
3
Turns the power on and off.
Display
Remote Control Sensor
Displays the current mode.
●● When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
●● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
●● If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup
menu of your TV. Refer to the owner's manual supplied with your TV.
6
DESCRIPTIONS
BOTTOM PANEL
ENG
DIGITAL AUDIO IN (OPTICAL)
Connect to the digital (optical) output of an external
device.
(Micro USB Port)
You can play the music from USB memory device if
connecting Micro USB memory device or Micro USB
to USB adapter cable (not supplied).
Refer to Micro USB to USB adapter cable
specification on page 23.
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
AUX IN
Connect to the Analogue output of an external device.
DIGITAL AUDIO IN
(OPTICAL)
DC 24V
USB (5V 0.5A)
AUX IN
LABEL
DC 24V
(Power Supply In)
DC 24V
Connect the DC power adaptor to the power supply jack, and
then connect the AC power adaptor plug to a wall outlet.
●● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
●● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
●● Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it
is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
7
DESCRIPTIONS
REMOTE CONTROL
SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the Repeat function during music playback from a USB device.
OFF - REPEAT : Cancells Repeat Playback.
TRACK - REPEAT : Plays a track repeatedly.
ALL - REPEAT : Plays all tracks repeatedly.
RANDOM - REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the ] button, the next file is selected.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the Bluetooth
POWER On function on and off. See pages 22 and 27 for details.
SOUND
Surround Sound adds depth and spaciousness to the sound. Pressing the
SOUND button repeatedly cycles through the Surround Sound settings :
ON - SURROUND SOUND, OFF - SURROUND SOUND
Press and hold the  button for about 5 seconds to turn the Auto Power Link
function on or off.
OFF - POWER LINK, ON - POWER LINK
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the Optical jack
so it turns on automatically when you turn on your TV. (See page 20)
Auto Power Link function is only available in the D.IN mode.
SOUND EFFECT
You can select from 6 sound modes - STANDARD (Original Sound), MUSIC,
CLEAR VOICE, SPORTS, MOVIE, and NIGHT - depending on the content
you want to listen to.
Select the STANDARD mode if you want to enjoy the original sound.
* DRC (Dynamic Range Control)
Lets you apply dynamic range control to Dolby Digital.
Press and hold the SOUND EFFECT button for about 5 seconds in
STANDBY mode to turn the DRC (Dynamic Range Control) function on or off.
8
DESCRIPTIONS
Power
Turns the Soundbar on and off.
Play / Pause
Press the p button to pause a file temporarily.
Press the p button again to play the selected file.
Skip Back
If there is more than one file on the device you are playing, and you press
the [ button, the previous file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, SUBWOOFER LEVEL, AUDIO SYNC,
REAR SPEAKER, or REAR LEVEL.
Then, use the ,  buttons to adjust the TREBLE or BASS volume from
-6 ~ +6, SUBWOOFER LEVEL volume from -12, -6 ~ +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
-6 ~ +6.
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to sync the audio with the
video. Use the ,  buttons to set the audio delay between
0 ms ~ 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function
may not available.
To turn on or off of the rear speaker sound, select REAR SPEAKER in Sound
Control, and then adjust the volume between OFF-RS and ON-RS by using the
,  buttons.
To control the volume of the rear level sound, select REAR LEVEL in Sound
Control, and then adjust the volume between RS -6~+6 by using the , 
buttons.
●● The REAR SPEAKER and the REAR LEVEL mode are only available when you connect the SWA-8000S
(sold separately).
-- If the SWA-8000S is disconnected, REAR SPEAKER and REAR LEVEL remain displayed but the
functions are not available.
●● Operate the TV using the TV's remote control.
9
ENG
Volume
Adjusts the volume level of the unit.
DESCRIPTIONS
++Controlling the Soundbar using Your TV Remote Control
1. Press and hold the
SOUND button for more than 5 seconds while the Soundbar is turned on.
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
●●
●●
●●
●●
All buttons are not available except the VOL +/- and the
(Mute) buttons in this function.
TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
This function is not available when the Soundbar is in the TV SoundConnect mode.
Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
●● To turn off this function, press the
SOUND button for 5 seconds.
"OFF - TV REMOTE" appears on the Soundbar's display.
INSTALLING THE BATTERY IN THE REMOTE CONTROL
1. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '●' marks side by side as
shown in the figure above.
10
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.
INSTALLATION
INSTALLING THE SOUNDBAR
INSTALLATION
ENG
INSTALLING THE WALL MOUNT
++Installation Precautions
●● Install on a vertical wall only.
●● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of
the set.
●● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the
unit on a different wall that can support the unit's weight.
●● Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board,
wood, etc.). If possible, fix the support screws into wall studs.
●● Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
-- Diameter: M5
-- Length: 35 mm or longer recommended.
●● Connect cables from the unit to external devices before you install it on the wall.
●● Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
5 cm or more
1. Place the Wall Mount Guide against the wall surface.
• The Wall Mount Guide must be level.
• If the TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.
11
INSTALLATION
A
B
CENTER LINE
B
A-TYPE : 616mm
B-TYPE : 360mm
A
Centre Line
2. Align the Paper Template's Centre Line with the centre of your TV (if you are mounting the Soundbar below your
TV), and then fix the Wall Mount Guide to the wall using tape.
●● If you are not mounting below a TV, place the Centre Line in the centre of the installation area.
A
B
CENTER LINE
A-TYPE : 616mm
B-TYPE : 360mm
B
B
A
CENTER LINE
3. Push a pen tip or sharpened pencil tip through the centre of the B-TYPE images on each end of the Guide to
mark the holes for the supporting screws, and then remove the Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in the wall at each marking.
●● If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or
mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the
holes you drill are large enough for the anchors or mollies you use.
12
INSTALLATION
ENG
5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support
screw hole.
6. Use the two Screws (M4 x L12) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a
proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.
Rear side of Soundbar
Right end of Soundbar
●● When assembling, make sure the hanger part of Bracket-Wall Mounts faces backwards.
Wall Mount R
Wall Mount L
●● The left and right mounts are different shapes. Make sure to position them correctly.
13
INSTALLATION
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the
Holder-Screws on the wall.
●● Slightly tilt the Soundbar to insert both Holder-Screw heads into Bracket-Wall Mount holes. Push the
Soundbar in the direction of the arrow to make sure both sides are firmly fixed.
14
DETACHING THE SOUNDBAR FROM THE WALL
INSTALLATION
●● Do not hang onto the installed unit and avoid striking or dropping the unit.
●● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or
damage the product.
●● When the unit is installed on a wall, please make sure that children do not pull any of the connecting
cables, as this may cause it to fall.
●● For the optimal performance of a wall mount installation, install the speaker system at least
5 cm below the TV, if the TV is mounted on the wall.
●● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely
to fall.
15
ENG
1. To separate the Soundbar from the wall mount, push it in the direction of the arrow, and then pull it away from the
wall as shown.
CONNECTIONS
CONNECTIONS
●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER
CONNECTING TO THE SUBWOOFER AUTOMATICALLY
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)
automatically when the main unit and subwoofer are turned on.
• When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and
glows continuously. The subwoofer’s LED indicator modes are listed below:
1
2
3
blue
Auto-connection is complete.
blue
blinking
Auto-connection is not complete.
blue is
not lit
a.Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
b.If the power cord is plugged in correctly, check the Soundbar main unit.
If your Soundbar main unit is off (in standby mode), the subwoofer will also be in standby
mode and the blue LED won't be lit.
CONNECTING TO THE SUBWOOFER MANUALLY
If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by
following the steps below.
●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
16
CONNECTIONS
Link indicator
ENG
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
• The LINK indicator (Blue LEDs) blinks quickly.
3. While the main unit is powered off, press and hold the
4. The ID SET message appears on the Soundbar's display.
(Mute) on the remote control for 5 seconds.
5. To finalise the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.
• The main unit and the subwoofer should now be linked (connected).
• The LINK indicator (Blue LED) on the subwoofer should be glowing continuously and not blinking.
• If the LINK indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from
Step 2.
• You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 8)
●● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
●● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
●● The maximum transmission distance of the wireless signal between the main unit and subwoofer is about
10 meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless
signal cannot penetrate metal.
●● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set the
connection between the main unit and wireless subwoofer.
●● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and
moisture.
●● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear
of any obstructions.
17
CONNECTIONS
CONNECTING THE SWA-8000S
(SOLD SEPARATELY)
●● Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-8000S) to your Soundbar. (Sold separately)
●● Before connecting to the Wireless Receiver Module, connect your subwoofer first.
●● Use the speaker cable to connect the wireless receiver module to the speakers.
●● Plug the Power cord into a power outlet. The LED turns on.
1. While the main unit is powered off (in STANDBY mode), press and hold the
5 seconds.
(Mute) on the remote control for
2. The ID SET message appears on the Soundbar's display.
3. Plug the power cord of the Wireless Receiver Module (SWA-8000S) into an AC wall outlet.
4. Turn on your Soundbar when the link indicator (Blue LED) on the SWA-8000S flickers fast.
5. When the link indicators (Blue LEDs) on your subwoofer and the SWA-8000S flash and then glow continuously, the
SWA-8000S is completely connected.
●● This may take a few minutes.
●● Once connected, your Soundbar and the Wireless Receiver Module are automatically reconnected even
after you turned them off and then on.
If the Wireless Receiver Module is not linked to your Soundbar (displaying the LED indicator in Red),
connect them as follows.
1. Turn off your Soundbar.
2. Press the
(Mute) button on your remote control for 5~6 seconds until the ID SET message appears on your
Soundbar display.
3. Check the Wireless Receiver Module is in Standby status (displaying the LED indicator in Red).
4. Press the ID SET button on the back with a sharp pin for 5~6 seconds until the LINK LED indicator on the
Wireless Receiver Module blinks (in Blue).
5. Turn on your Soundbar with the
button on your remote control and wait for a while. They are completely
connected to each other if you can see the LINK LED indicator is continuously lit (in Blue).
18
L
R
ENG
CONNECTING THE SURROUND SPEAKERS
(SOLD SEPARATELY)
CONNECTIONS
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
ID SET
Surround Speaker (L)
Surround Speaker (R)
Wireless Receiver Module
●● Place these speakers to the side of your listening position. If there isn't enough room, place these
speakers so they face each other. Position them about 60 to 90 cm above your ear, facing slightly
downward.
●● Use the speaker cable to connect the Wireless Receiver Module to the Surround Speakers.
●● Each speaker has a coloured label on its back or underside. Each cable has a single coloured band near its
end. Match the band on each cable to the speaker label by colour, and then connect the cable to the
speaker.
19
CONNECTIONS
CONNECTING TO A TV
●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
DIGITAL AUDIO IN
(OPTICAL)
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
Wi-Fi SETUP
SPK ADD
DC 24V
HDMI OUT
(TV-ARC)
AUX IN
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a
digital optical cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.
++Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the
D.IN mode.
button on the main unit’s right side or the SOURCE button on the remote control to select the
3. Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.
●● Auto Power Link is set to ON by default.
●● Depending on the connected device, Auto Power Link may not function.
20
CONNECTIONS
TV SOUNDCONNECT
Connect
1. Turn on the TV and Soundbar.
2. Press the
button on the main unit’s right side or the SOURCE button on the remote control to select the TV
mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.
●● If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device, and set Add New Device to ON. Then, try again.
●● Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect.
●● To connect the Soundbar to another TV, the existing connection must be terminated.
●● To terminate the existing connection, press and hold the p button on the remote for 5 seconds or switch
to another mode. To connect to the other TV, follow Steps 1 through 4 above.
●● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on.
Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin.
(For further information, refer to the TV’s user manual.).
●● If your Samsung TV was released before 2014, check the SoundShare setting menu.
●● If the distance between the TV and Soundbar exceeds 10 meters the connection may not be stable or the
audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and
then re-establish the TV SoundConnect connection.
●● TV SoundConnect Operational Ranges:
-- Recommended pairing range: within 2 meters.
-- Recommended operational range: within 10 meters.
●● The Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar's remote do not control the TV.
21
ENG
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
CONNECTIONS
++Using the Bluetooth POWER On function
The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth
compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on
or off will turn the Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV SoundConnect function.
2. Press the Bluetooth POWER button on the Soundbar remote. ON - BLUETOOTH POWER appears on the
Soundbar's display.
• ON - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.
• OFF - BLUETOOTH POWER : The Soundbar only turns off when you turn the TV off.
●● This function is supported by some Samsung TVs released from 2013 on.
CONNECTING TO EXTERNAL DEVICES
OPTICAL OR ANALOGUE AUDIO CABLE
This unit comes equipped with one digital optical in jack and one analogue audio (AUX) in jack, giving you two
ways to connect it to external devices.
Audio Cable
(not supplied)
AUX OUT
BD / DVD player /
Set-top box /
Game console
AUX IN
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
Wi-Fi SETUP
SPK ADD
HDMI OUT
(TV-ARC)
DC 24V
USB (5V 0.5A)
AUX IN
AUX IN
++AUX Cable
1. Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to select
the AUX mode.
++Optical Cable
1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a
digital optical cable.
2. Press the
button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.
22
CONNECTIONS
USB
You can play music files located on USB storage devices through the Soundbar.
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
DC 24V
DIGITAL AUDIO IN
(OPTICAL)
Display
USB (5V 0.5A)
Micro USB to
USB adapter Cable
(not supplied)
AUX IN
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a
standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
●● The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre
or Samsung Customer Care.
2. Connect your USB device to the female end of the adapter cable.
3. Press the
USB mode.
button on the main unit’s right side or the SOURCE button on the remote control to select the
4. USB appears on the display screen.
• The Soundbar connection to the USB device is complete.
• The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more than
5 minutes.
23
ENG
USB port
CONNECTIONS
++Before you connect a USB device
Be aware of the following:
●● If the file name of a file on a USB device exceeds 10 characters, it is not displayed on the Soundbar's display.
●● This product may not be compatible with certain types of USB storage media.
●● The Soundbar supports the FAT16 and FAT32 file systems.
-- The NTFS file system is not supported.
●● Connect USB devices to the USB port of the product using a USB 2.0 Micro USB plug to standard female 2.0
USB jack adapter cable. Otherwise, you may encounter a USB compatibility problem.
●● Do not connect multiple storage devices to the product via a multi-card reader. It may not operate properly.
●● Digital camera PTP protocols are not supported.
●● Do not remove the USB device while it is transferring files.
●● DRM-protected music files (MP3, WMA) from commercial web sites cannot be played.
●● External HDDs are not supported.
●● Mobile phone devices are not supported.
●● File Format Type Compatibility list:
Extension
Codec
Sampling Rate
Bit Rate
MPEG 1 Layer3
16KHz ~ 48KHz
80kbps~320kbps
MPEG 2 Layer3
16KHz ~ 48KHz
80kbps~320kbps
MPEG 2.5 Layer3
16KHz ~ 48KHz
80kbps~320kbps
Wave_Format_MSAudio1
16KHz ~ 48KHz
56kbps~128kbps
Wave_Format_MSAudio2
16KHz ~ 48KHz
56kbps~128kbps
AAC
16KHz ~ 96KHz
48kbps~320kbps
AAC-LC
16KHz ~ 96KHz
HE-AAC
24KHz ~ 96KHz
*.wav
-
16KHz ~ 48KHz
up to 3000kbps
*.flac
OGG 1.1.0
16KHz ~ 48KHz
50kbps~500kbps
FLAC 1.1.0, FLAC 1.2.1
16KHz ~ 96KHz
up to 3000kbps
*.mp3
*.wma
*.aac
*.ogg
MPEG 1 Layer2
16KHz ~ 48KHz
80kbps~320kbps
128kbps~192kbps
5.1ch 320kbps
48kbps~64kbps
5.1ch 160kbps
●● If there are too many folders and files stored on the USB device, it may take the Soundbar some time to
access and play files.
24
FUNCTIONS
FUNCTIONS
INPUT MODE
Right Side of the Soundbar
Input mode
Display
Optical Digital input
D.IN
AUX input
BLUETOOTH mode
TV SoundConnect
USB mode
AUX
BT
TV
USB
AUTO POWER DOWN FUNCTION
The unit turns off automatically in the following situations.
●● D.IN / BT / TV / USB Mode
-- If there is no audio signal for 5 minutes.
●● AUX Mode
-- If the AUX cable is disconnected for 5 minutes.
-- If there is no KEY input for 8 hours when the AUX cable is connected. (Auto Power Down function can be
turned off only in that case.)
To turn off Auto Power Down function, while in AUX mode, press and hold the p button for 5 seconds.
ON - AUTO POWER DOWN / OFF - AUTO POWER DOWN appears on the display.
25
ENG
button on the main unit’s right side or the SOURCE button on the remote control to select the mode
Press the
you want.
FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
TO CONNECT THE SOUNDBAR TO A BLUETOOTH DEVICE
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
1. Press the
mode.
Bluetooth device
button on the main unit’s right side or the SOURCE button on the remote control to select the BT
• You will see BT READY on the front display of the Soundbar.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user
manual.)
3. Select "[AV] Samsung Soundbar Kxxx K-Series" from the list.
• When the Soundbar is connected to the Bluetooth device, it will display [Bluetooth device name]  BT on
the front display.
• The device name can only be displayed in English. An underline " _ " will be displayed if the name is not in
English.
• If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[AV] Samsung Soundbar
Kxxx K-Series" found by the Bluetooth device and have it search for the Soundbar again.
4. Play music on the connected device.
• You can listen to the music playing on the connected Bluetooth device over the Soundbar.
• In BT mode, the Play / Pause / Next / Prev functions are not available. However, these functions are available
on Bluetooth devices supporting AVRCP.
26
FUNCTIONS
●●
●●
●●
●●
●●
●●
●●
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
Only one Bluetooth device can be paired at a time.
The Bluetooth connection will be terminated when you turn the Soundbar off.
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
-- If there is a strong electrical field around the Soundbar.
-- If several Bluetooth devices are simultaneously paired with the Soundbar.
-- If the Bluetooth device is turned off, not in place, or malfunctions.
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device, which can cause electric interference.
The Soundbar supports SBC data (44.1kHz, 48kHz).
Connect only to a Bluetooth device that supports the A2DP (AV) function.
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
Once you have paired the Soundbar to a Bluetooth device, selecting "[AV] Samsung Soundbar Kxxx
K-Series" from the device's scanned devices list will automatically change the Soundbar to BT mode.
-- Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying
BT READY.
In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
BLUETOOTH POWER ON (BLUETOOTH POWER)
If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth POWER On function is on
and the Soundbar is turned off, the Soundbar turns on automatically.
1. Press the Bluetooth POWER button on the remote while the Soundbar is turned on.
2. ON - BLUETOOTH POWER appears on the Soundbar's display.
TO DISCONNECT THE BLUETOOTH DEVICE FROM A
SOUNDBAR
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
●● The Soundbar will be disconnected.
●● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCONNECTED on the front display.
TO DISCONNECT THE SOUNDBAR FROM A BLUETOOTH
DEVICE
Press the SOURCE button on the remote control or the
another mode or turn off the Soundbar.
button on the product's right side to switch from BT to
●● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
27
ENG
●●
●●
●●
●●
FUNCTIONS
●● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
●● The Soundbar automatically turns off after 5 minutes in the Ready state.
++More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a
short wireless connection.
●● A Bluetooth device may cause noise or malfunction, depending on usage, if:
-- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-- It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
●● Pair the Soundbar with the Bluetooth device while they are close together.
●● The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●● In poor reception areas, the Bluetooth connection may not work properly.
●● The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as
walls or doors.
●● This wireless device may cause electric interference during its operation.
28
USING THE SAMSUNG AUDIO REMOTE APP
FUNCTIONS
To control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio
Remote app from the Google Play store.
Market search : Samsung Audio Remote
++Launching the Samsung Audio Remote App
To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device, and then
follow the directions on the screen.
●● The Samsung Audio Remote app is only compatible with Android mobile phones and mobile devices
running Android OS 3.0 or later.
29
ENG
++Installing the Samsung Audio Remote App
FUNCTIONS
SOFTWARE UPDATE
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
DC 24V
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it
to the USB port on your Soundbar.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the
firmware one file at a time.
Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update
files.
UPDATING PROCEDURE
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a
standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
●● The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre
or Samsung Customer Care.
2. Follow the steps below to download the product software:
Go to the Samsung website at (samsung.com/sec)  search for the model name - select the customer support
option (the option name is subject to change)
3. Save the downloaded software to a USB stick and select "Extract Here" to unzip the folder.
4. Turn off the Soundbar and connect the USB stick containing the software update to the female port on a Micro
USB adapter cable.
5. Turn on the Soundbar. Within 3 minutes, UPDATE is displayed and updating begins.
6. After completion, the power of Soundbar turns off. In this state, press the p button on the remote control for
5 seconds.
●● This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware
again.
30
IF UPDATE IS NOT DISPLAYED
FUNCTIONS
2. Disconnect the power cord, reconnect it, and then turn on the Soundbar.
●● Insert a USB device containing the firmware update into the USB port on the main unit.
●● Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB
storage device.
●● Do not disconnect the power or remove the USB device while updates are being applied. The main unit will
turn off automatically after completing the firmware update.
●● After update is completed, the user setup in Soundbar is initialised. We recommend you write down your
settings so that you can easily reset them after the update. Note that updating firmware resets the
subwoofer connection too.
If the connection to the subwoofer is not re-established automatically after the update, refer to page 16.
If the software update fails, check that the USB stick is not defective.
●● Mac OS users should use MS-DOS (FAT) as the USB format.
●● Depending on the manufacturer, some USB devices may not be supported.
31
ENG
1. Turn off the Soundbar, connect the USB storage device that contains update files to the Soundbar’s USB port.
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼¼Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼¼Disconnect the power plug and connect it again.
Sound is not produced.
• Is the Mute function on?
• Is the volume set to minimum?
¼¼Press the
function.
(Mute) button to cancel the Mute
¼¼Adjust the volume.
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main
unit too far?
¼¼Replace with new batteries.
¼¼Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
¼¼TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
¼¼Update your TV with the latest firmware.
¼¼Contact the Samsung Call Centre.
¼¼Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection, press
and hold the p button for 5 seconds.
The blue indicator on the rear of the subwoofer is not lit and the subwoofer is not producing
sound.
• Is the main unit power on?
• Your subwoofer may not be connected to the
main unit of the product.
¼¼Check the power cord. If the power cord is plugged
in correctly, check the main unit. If your main unit is
off (in standby mode), the subwoofer will also be in
standby mode and the blue LED won't be lit.
¼¼Try to connect your subwoofer again.
(See Page 16)
32
APPENDIX
APPENDIX
SPECIFICATIONS
Weight
GENERAL
Dimensions
(W x H x D)
5V / 0.5A
Main Unit
Subwoofer (PS-WK430)
Main Unit
Subwoofer (PS-WK430)
Operating Temperature Range
Operating Humidity Range
AMPLIFIER
Rated Output Main Unit
Power
Subwoofer (PS-WK430)
2.0 kg
2.9 kg
908.5 x 53.5 x 70.5 mm
155.0 x 300.0 x 293.0 mm
+5°C to +35°C
10 % to 75 %
40W x 4, 6 ohm, THD≦10%
60W, 3 ohm, THD≦10%
* Design and specifications are subject to change without prior notice.
* Nominal specification
-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-- Weight and dimensions are approximate.
-- For more information about the power supply and power consumption, refer to the label attached to the product.
aa Open Source Licence Notice
-- To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
33
ENG
USB
APPENDIX
LICENCES
Manufactured under licence from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under licence from DTS Licencing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
Wireless Models (including the frequency of 5.15GHz-5.35GHz)
• Hereby, Samsung Electronics, declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
Wireless Models (excluding the frequency of 5.15GHz-5.35GHz)
• Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
34
UNITED
UNITED
KINGDOM
KINGDOM
UNITED
KINGDOM
EIRE
EIRE EIRE
beyond
beyondthe
thecontrol
control
ofofSamsung.
Samsung.
ssSamsung
SamsungThis
product
product
isiswarranted
warranted
for
theperiod
periodof
oftwelve
twelve
(12)
(12)months
from
the
origiorigi-from the origibeyond
the
control of
Samsung
productfor
is the
warranted
for
the period
ofmonths
twelvefrom
(12)the
months
This
Samsung
product
is warranted
for
the
period ofand workmanship.
4.event
This product
not6.6.
considered
to6.
beThis
defective
in any
date
dateofofpurchase,
purchase,
against
against
defective
defective
materials
materials
and
and
workmanship.
workmanship.
InInthe
the
event
that
that
This
Thiswarranty
warranty
is
isvalid
valid
for
for
any
person
ww
nal date
of purchase,
against
defective
materials
In theisevent
that
warranty
isperson
valid
for
twelve
(12)service
months
thereturn
original
date
ofreturn
purchase,
materials
workmanship
thatproduct
it requires
ranty
rrantyservice
service
isisrequired,
required,
you
you
should
should
return
the
product
product
totothe
theproduct
retailer
retailerfrom
from
whom
itnor
it from
possession
possession
ofofpossession
the
the
product
during
the
thew
warranty
isfrom
required,
youthe
should
to
thewhom
retailer
whom
it by reason
ofduring
the produc
against
defective
materials
and
workmanship.
In Authorised
the
spurchased.
purchased.
However,
However,
Samsung
Samsung
Authorised
Authorised
Dealers
Dealers
and
and
Authorised
Service
Service
Centres
Centres
7.7.to
The
The
consumers
consumers
statutory
statutory
rights
rights
ininany
anyap
a
adaptation
in
order
conform
to7.
national
or local
was
purchased.
However,
Samsung
Authorised
Dealers and
Authorised
Service
Centres
The
consumers
statutory
other
ther EC
ECCountries
Countries
will
will
comply
complyservice
with
with
the
the
warranty
warranty
on
on
the
the
terms
terms
issued
issued
purchasers
purchasers
inpurchasers
the
theretailer
retailer
arising
arising
from
from
the
the
purchase
purchase
c
event
that
warranty
is
required,
should
return
in other
EC
Countries
will
comply
withyou
the
warranty
on thetoto
terms
issued
to
in in force
the
retailer
arising
from co
th
technical
orin
safety
standards
in any
Country
country
countryconcerned.
concerned.
InInto
case
case
ofdifficulty,
difficulty,
details
details
our
ourpurchased.
Authorised
Authorised
Service
Service
Centres
Centres
are
are
warranty.
warranty.
Unless
there
there
isnational
national
legisla
legis
the product
country
concerned.
Infrom
case
of difficulty,
details of our
Authorised
Service
Centres
aretheUnless
warranty.
there
is
the
the of
retailer
whom
itofof
was
other
than
the one
for
which
product
was isUnless
ailable
lable from:
from:
warranty
warrantyare
arethe
the
consumers
consumers
sole
sole
rights
rights
available Samsung
from:
warranty
are the
consume
However,
Authorised Dealers and Authorised
originally designed and anufactured. This warranty will
tors
torsshall
shallnot
notbe
be
liable
liable
for
indirect
indirect
ororcon
con
tors
shallfor
not
be liable
for
Service Centres in other EC Countries will comply with
not
cover, and
no479
re-imbursement
willcompact
be
madeordiscs,
foraudio
Samsung
Samsung
Electronics
Electronics
U.K.
Ltd.
Ltd.
Customer
Customer
Care
Care
CentrePO
CentrePO
Box
Box
479
479
compact
compactdiscs,
discs,
videos
videos
or
audio
taper
taperorora
Samsung
Electronics
U.K.
Ltd.
Customer
Care
CentrePO
Box
videos
the warranty
on theU.K.
terms
issued
to
purchasers
in
the
such adaptation nor any damage which may result.
GATESHEAD
GATESHEADGATESHEAD
NE9
NE99BJ
9BJUnited
United
Kingdom
NE9Kingdom
9BJ United Kingdom
country concerned. In case of difficulty, details of our
SAMSUNG
SAMSUNG
ELECT
ELECT
SAMSUN
5.
This warranty covers none of the following:
AuthorisedUnited
ServiceKingdom
Centres
are available
from:
United
Kingdom
United
Kingdom
Tel
Tel: :0330
0330SAMSUNG
SAMSUNG
(7267864)
Tel : 0330(7267864)
SAMSUNG (7267864) a) Periodic check ups, maintenance and repair or
Fax:
Fax:03307260001
03307260001
Samsung
Electronics
U.K. Ltd
Fax: 03307260001
replacement of parts due to normal wear and
www.samsung.com
www.samsung.com
www.samsung.com
Samsung
Customer
Support Centre
tear.
b) C
ost relating to transport, removal or installation
of the product.
Fax:
Fax:+44
+44117
117Fax:
915
9156736
6736117 915 6736
+44
c)Misuse, including the faiure to use this product
United
Kingdom
www.samsung.com
www.samsung.com
www.samsung.com
for its normal purposes or incorrect installation.
Tel : 0330 SAMSUNG (7267864)
d)Damage caused by Lightning, Water, Fire,
WARRANTY
ARRANTY■WARRANTY
CONDITIONS
CONDITIONS
CONDITIONS
www.samsung.com/uk/support
Acts
of
God, War,
The
he warranty
warranty
only
only
valid
validif,if,when
warranty
service
service
isisrequired,
required,
the
theiswarranty
warranty
card
isfully
fully
1.isis
The
warranty
iswhen
onlywarranty
valid if, when
warranty
service
required,card
the iswarranty
card Public
is fully Disturbances,
and
nd properly
properlycompleted
completed
and
andcompleted
isispresented
presented
with
with
the
theoriginal
original
invoice
invoice
ororsales
sales
slip
slip
ororor
confirconfirand properly
and
is presented
with
the original
invoice
sales
slip or
confir- improper ventilation or
incorrect
mains
voltage,
EIRE
mation,
mation,and
andthe
the
serial
serialnumber
number
onthe
thenumber
product
producton
has
has
not
not
been
beendefaced.
defaced.
mation,
and
the on
serial
the
product
has not been defaced.
any other cause beyond the control of
Telare
:are
0818
717100
Samsung’s
Samsung’s2.
obligations
obligations
limited
limited
totothe
therepair
repairor,
or,
atits
itsrepair
discretion,
discretion,
replacement
Samsung’s
obligations
are
limited
toatthe
or, at replacement
its
discretion,ofof
replacement of
Samsung.
he
theproduct
productororthe
the
theproduct
defective
defective
part.defective part.
orpart.
the
www.samsung.com/ie/support
Selectapost 38, Sheffield, S97 3FJ
Eire
Eire
Eire
United
Kingdom
Tel
Tel: :0818
0818
717100
717100
Tel : 0818 717100
Warranty
Warrantyrepairs
repairs
must
mustbe
becarried
carried
out
outbe
by
bycarried
Authorised
Authorised
Samsung
Samsung
Dealers
Dealers
oror warranty
3. Warranty
repairs
must
out by
Authorised
Samsung
Dealers
or for any person who legally
6. This
is valid
Authorised
AuthorisedService
Service
Centres.
Centres.
No
Nore-imbursement
re-imbursement
will
willbe
bemade
madefor
forrepairs
repairs
carried
carried
Authorised
Service
Centres. No re-imbursement
will
be made
for repairs carried
acquired possession of the product during the
out
ut by
bynon
nonSamsung
Samsung
Dealers
Dealers
and,
and,any
anysuch
such
repair
repair
work
work
and
and
damage
damage
tothe
the
prodprod- to the prodout by non
Samsung
Dealers
and,
any
such
repair
work to
and
damage
@ WARRANTY CONDITIONS
warranty
period.
ucts
cts caused
causedby
by
such
such
repair
repair
work
work
will
will
not
notbe
becovered
covered
by
by
this
this
warranty.
warranty.
ucts
caused
by
such
repair
work
will not
be
covered
by this
warranty.
This
his product
product
not
notwarranty
considered
considered
totobe
bedefective
defective
in
materials
materials
nor
nor
workmanship
by
by
4.isis
This
product
is
not
considered
be
defective
inisworkmanship
materials
nor
workmanship
by rights in any applicable
1.
The
is only
valid
if, whentoin
warranty
service
7. The consumers statutory
eason
reasonthat
thatititrequires
requires
adaptation
adaptation
inincard
order
order
toconform
conform
totonational
national
ororlocal
local
technical
technical
reason
that
requires
adaptation
in order
to
conform
to
national
or local technical
required,
theitwarranty
is to
fully
and
properly
national
legislation
whether
against the retailer arising
or
r safety
safetystandards
standards
ininforce
force
ininany
anyin
Country
Country
other
than
thanthe
theother
one
onefor
for
which
which
theproduct
product
or safety
standards
force inother
any Country
than
the the
one
for
which the product
completed
andmanufactured.
is presented with
thewarranty
original invoice
from
therepurchase
was
wasoriginally
originallydesigned
designed
and
and
manufactured.
This
This
warranty
will
willnot
not
cover,
cover,and
andnot
no
no
rewas
originally
designed
and manufactured.
This
warranty
will
cover,
andcontract
no re- or otherwise are not
or sales
slip or
confirmation,
andsuch
the
serial
onwhich
affected
by this
warranty.
mbursement
mbursementwill
will
be
bemade
made
for
for
such
such
adaptation
adaptation
nor
nor
any
anynumber
damage
damage
which
may
may
result.
result.
imbursement
will
be made
for
adaptation
nor
any damage
which
may
result. Unless there is national
the
product
has
been
defaced.
This
his warranty
warranty
covers
covers
none
none
ofcovers
ofnot
the
the
following:
following:
5. This
warranty
none
of the following:
legislation to the contrary, the rights under this
a)
) Periodic
Periodiccheck
check
ups,
ups,maintenance
maintenance
andrepair
repairororreplacement
replacement
ofparts
parts
due
duetoto
a) Periodic
check ups, and
maintenance
and
repair orof
replacement
ofareparts
due to sole rights and
warranty
the consumers
2.
Samsung’s
obligations are limited to the repair or, at
normal
normalwear
wear
and
andtear.
tear.
normal
wear and tear.
Samsung,
its
subsidiaries
and distributors shall not be
itstoto
discretion,
replacement
the
product
the
b)
) Cost
Costrelating
relating
transport,
transport,
removal
removal
ororof
installation
installation
of
ofor
the
the
product.
product.of the product.
b)
Cost
relating
to transport,
removal
or
installation
liable for indirect or consequential loss or any damage
defective
c)
) Misuse,
Misuse,including
including
the
thepart.
faiure
faiure
totouse
use
this
product
product
for
for
its
itsnormal
normal for its normal
c)
Misuse,
including
thethis
faiure
to use
this
product
to records, compact discs, videos or audio taper or
purposes
purposesororincorrect
incorrect
installation.
installation.
purposes
or incorrect installation.
3.
Warranty
repairs
mustWater,
beLightning,
carried
out
by Authorised
anyWar,
otherPublic
related equipment or material.
d)
) Damage
Damage
caused
caused
by
byLightning,
Lightning,
Water,
Fire,
Fire,
Acts
Acts
ofofGod,
God,
War,Public
Public
d)
Damage
caused
by
Water,
Fire,War,
Acts
of
God,
Samsung
Dealers
or
Authorised
Service
Centres.
No ororany
Disturbances,
Disturbances,
incorrect
incorrect
mains
mains
voltage,
voltage,
improper
improper
ventilation
ventilation
anyother
othercause
cause
Disturbances,
incorrect
mains
voltage,
improper
ventilation
or any other cause
re-imbursement will be made for repairs carried out
SAMSUNG ELECTRONICS (U.K.) LTD.
-2-2-2by non Samsung Dealers and, any such repair work
and damage to the products caused by such repair
work will not be covered by this warranty.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact
the SAMSUNG customer care Centre.
Country
` Europe
Contact Centre 
U.K
EIRE
0330 SAMSUNG (7267864)
0818 717100
0180 6 SAMSUNG bzw.
0180 6 7267864*
GERMANY
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
FRANCE
01 48 63 00 00
ITALIA
800-SAMSUNG (800.7267864)
SPAIN
34902172678
PORTUGAL
808 20 7267
LUXEMBURG 261 03 710
0900-SAMSUNG (0900-7267864)
NETHERLANDS
(€ 0,10/Min)
Web Site
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/de/support
www.samsung.com/fr/support
www.samsung.com/it/support
www.samsung.com/es/support
www.samsung.com/pt/support
www.samsung.com/be_fr/support
www.samsung.com/nl/support
www.samsung.com/be/support
(Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/no/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/se/support
BELGIUM
02-201-24-18
NORWAY
DENMARK
FINLAND
SWEDEN
815 56480
70 70 19 70
030-6227 515
0771 726 7864 (0771-SAMSUNG)
801-172-678* lub +48 22 607-93-33 *
www.samsung.com/pl/support
* (koszt połączenia według taryfy operatora)
0680SAMSUNG (0680-726-786)
www.samsung.com/hu/support
0680PREMIUM (0680-773-648)
POLAND
HUNGARY
[Correct disposal of batteries in this product]
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
Country
AUSTRIA
Contact Centre 
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG)
CZECH
SLOVAKIA
CROATIA
BOSNIA
MONTENEGRO
SLOVENIA
SERBIA
BULGARIA
ROMANIA
CYPRUS
GREECE
LITHUANIA
LATVIA
ESTONIA
800 - SAMSUNG (800-726786)
0800 - SAMSUNG (0800-726 786)
072 726 786
055 233 999
020 405 888
080 697 267 (brezplačna številka)
011 321 6899
*3000 Цена в мрежата
0800 111 31 , Безплатна телефонна линия
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG)
Apel GRATUIT
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only
from land line (+30) 210 6897691 from
mobile and land line
8-800-77777
8000-7267
800-7267
Web Site
www.samsung.com/at/support
www.samsung.com/ch/support
(German)
www.samsung.com/ch_fr/
support (French)
www.samsung.com/cz/support
www.samsung.com/sk/support
www.samsung.com/hr/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/si
www.samsung.com/rs/support
www.samsung.com/bg/support
www.samsung.com/ro/support
www.samsung.com/gr/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g.
REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Download PDF

advertising