Samsung WD8704EJA 8/5kg Air Refresh Washer Dryer User Manual

WD8704EJ(A/F/G/H/S/V/W/Z)
WD8702EJ(A/F/G/H/S/V/W/Z)
WD8700EJ(A/F/G/H/S/V/W/Z)
WD8704RJ(A/F/G/H/S/V/W/Z)
WD8702RJ(A/F/G/H/S/V/W/Z)
WD8700RJ(A/F/G/H/S/V/W/Z)
WD8704CJ(A/F/G/H/S/V/W/Z)
WD8702CJ(A/F/G/H/S/V/W/Z)
WD8700CJ(A/F/G/H/S/V/W/Z)
WD8704DJ(A/F/G/H/S/V/W/Z)
WD8702DJ(A/F/G/H/S/V/W/Z)
WD8700DJ(A/F/G/H/S/V/W/Z)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
WD8704EJ-02748A-01_EN.indd 1
2010-04-16 ¿ÀÈÄ 3:10:46
features of your new samsung
washing machine
Your new washing machine will change the way you feel about doing laundry. From
its super-size capacity to its energy efficiency, the Samsung washing machine has
all the features to turn a mundane chore into a pleasure.
• Washing to drying with one button
Enjoy convenient non stop washing and drying managing. 4 different special drying programs
can be selected to perform the whole wash cycle including the drying cycle using one button.
•
Cupboard(standard program), Low temp drying, Iron,Time Drying (30min ~ 270mins)
Those drying programs also can be operated independently of washing programs.
• Child Lock
The Child Lock function ensures that curious little hands are kept out of your washing
machine.
This safety feature stops your children from playing with the operation of the washing
machine, and alerts you when it is activated.
• Wool Certified
The machine has been tested and passed the required Woolmark Company specification for
machine washable wool products.
Fabrics should be washed according to the instructions on the garment label as specified by
Woolmark and Samsung.
• Delay End
Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of
using your washing machine especially when you have to go out.
• Quick Wash
No time to lose! Less than 30 minutes wash will give you time to run out before it’s too late.
Our 29 minute Quick Wash program can be the solution to your busy life. Now you can wash
your favourite clothes in only 29 minutes!
• Delicates & Hand Wash Program
Special care can be determined by the appropriate temperature, the gentle wash action and
the appropriate amount of water.
• Ceramic Heater for Durability & Energy Saving (selected models)
Our truly innovative Ceramic Heater is twice as durable as regular heaters.
That saves you money on repairs. Plus, it eliminates the scale of hard water and save energy.
2_ features
WD8704EJ-02748A-01_EN.indd 2
2010-04-16 ¿ÀÈÄ 3:10:46
• Air Wash
The Air Wash system deodorizes unpleasant smells and sterilizes the laundry that cannot
be eliminated through a conventional washing system, a benefit of its unique air-washing
mechanism.
• Air-washable : Woolen coats, cotton/down jumpers, sweaters, suits, pillows, cushions,
needlework dolls
• Not applicable : leather, silk, velvet, electric blankets, other stained laundry
• Digital Graphic Display
The Digital Graphic Display control panel is clear and easy to use for minimum fuss and
hassle. And while it is easy to operate, the Digital Graphic Display enables you to make quick
and accurate adjustments to your wash for excellent washing results.
• Wide door
Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for
large sized laundry items such as bedding, towels etc.
• Direct Drive Motor
As the drum does not utilize belts or gears, vibrations are reduced significantly. This feature
ensures that your washer machine is quieter and more durable.
This manual contains important information on the installation, use, and care of your new
Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how
to use the washing machine, and tips for making the most of its state-of-the-art features and
functions. The “Troubleshooting and information codes” section on page 29 tells you what to
do if something goes wrong with your new washing machine.
features _3
WD8704EJ-02748A-01_EN.indd 3
2010-04-16 ¿ÀÈÄ 3:10:46
safety information
Throughout this manual, you’ll see Warning
and Caution
notes. These
warnings, cautions, and the important safety instructions that follow do not cover
all possible conditions and situations that may occur. It’s your responsibility to use
common sense, caution, and care when installing, maintaining, and operating your
washing machine. Samsung is not liable for damages resulting from improper use.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury
or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal
injury when using your washing machine, follow these basic safety
precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Notice
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.
Install and store your washing machine inside, away from exposure to weather.
Install and level your washing machine on a floor that can support its weight.
Your washing machine must be properly grounded. Never plug it into an ungrounded outlet.
4_ safety information
WD8704EJ-02748A-01_EN.indd 4
2010-04-16 ¿ÀÈÄ 3:10:48
To reduce the risk of fire or explosion:
CAUTION
• Do not wash items that have been washed, soaked, or treated with gasoline, dry
cleaning solvents, or other flammable or explosive substances. They give off vapors that
could ignite or explode. Rinse by hand any material that has been exposed to cleaning
solvent or other flammable liquids or solids before putting in your washing machine. Be
sure that all traces of such liquids, solids, and fumes have been removed. Dangerous
substances include acetone, denatured alcohol, gasoline, kerosene, certain liquid
household cleaners and spot removers, turpentine, waxes, and wax removers.
• Do not put gasoline, dry cleaning solvents, or other flammable or explosive substances
into the washing machine.
• Under certain conditions, hydrogen gas may be produced in a hot water system–such
as your hot water heater -- that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or
more, turn on all hot water taps in your home, and let the water flow for several minutes
before using your washing machine. This will release any hydrogen gas build–up. Since
hydrogen gas is flammable, do not smoke or light an open flame during this time.
Ventilate immediately without touching the power plug if there is a gas leak.
Unplug the power cord before servicing your washing machine.
Before each wash, empty the pockets of your laundry. Small, irregularly shaped hard
objects, such as coins, knives, pins, and paperclips could damage your washing machine.
Do not wash clothing with large buckles, buttons, or other heavy metal metal.
Do not open the door of the washing machine if you can still see water. Check that the
water has drained before opening the door.
Do not repair, replace, or service any part of your washing machine yourself unless you fully
understand the recommended user–repair instructions and have the skills to carry them
out. Work done by an unauthorized person may void your warranty.
Connect the washing machine to the water mains using the new set of hoses. Do not reuse
the old set of hoses.
Water inlet hoses deteriorate over time. Check the hoses periodically for bulges, kinks, cuts,
wear, and leaks, and replace them as needed and at least every five years.
All packaging and shipping bolts must be removed before the appliance is used. Serious
damage may occur if they are not removed. See page 12 “Removing the shipping bolts”.
Before washing clothes for the first time, you must run a complete cycle without clothes.
See “Washing for the first time”.
safety information _5
WD8704EJ-02748A-01_EN.indd 5
2010-04-16 ¿ÀÈÄ 3:10:48
safety information
The appliance is designed for home use only.
WARNING
Make sure that water and electrical connections are made by qualified technicians,
observing the user manual (see “Installing your washing machine”) and local safety
regulations.
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet.
Always unplug the appliance and turn off the water after use.
Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Never allow pets and children to play on or in the appliance. It may cause injury or suffocate
them.
The glass door becomes very hot during the washing cycle. Never touch on the glass door
while it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or
unqualified persons may cause injury and/or make more serious repairs to the appliance
necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
This appliance should only be serviced by our authorized service center, and only rated
spare parts should be used.
WARNING
WARNING
Do not let children (or pets) play on or in your washing machine. The washing machine door
does not open easily from the inside, and children may be seriously injured if trapped inside.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance
To use this appliance safely, the user should become familiar with the instructions for
operation of the appliance and always take extra care when using it.
This appliance should be positioned to be accessible to the power plug, the water supply
tabs and the drain pipes.
WARNING
Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.
Do not use processed water containing oil, cream or lotion, which is usually found in
skincare shops or massage clinics.
• Otherwise this will cause the packing to be deformed, which causes a malfunction or
water leak.
6_ safety information
WD8704EJ-02748A-01_EN.indd 6
2010-04-16 ¿ÀÈÄ 3:10:48
A stainless washing tub does not usually rust. However if some metal such as a hair pin is
left in the tub for an extended time, the tub could rust.
• Do not leave water or bleach containing chlorine in the tub for an extended period of
time.
• Do not regularly use or leave water containing iron in the tub for an extended period of
time. If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral)
to the surface and use a sponge or soft cloth to clean it. (Under no circumstances use a
metal brush)
The dryer is not to be used if chemicals have been used for cleaning.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Use the new hose-sets and old hose-sets should not be reused.
safety information _7
WD8704EJ-02748A-01_EN.indd 7
2010-04-16 ¿ÀÈÄ 3:10:48
contents
SETTING UP YOUR WASHING
MACHINE
9
10
10
10
11
11
11
11
11
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
WASHING A LOAD OF LAUNDRY
17
17
18
20
20
20
20
21
22
23
23
24
25
25
25
Washing for the first time
Basic instructions
Using the control panel
Child lock
Sound off
Delay end
Drain Only Function
Air Wash
Using dry course
Washing clothes using the cycle selector
Washing clothes manually
Laundry guidelines
Detergent and additives information
Which detergent to use
Detergent drawer
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
26
27
28
28
28
Draining the washing machine in an
emergency
Cleaning the exterior
Cleaning the detergent drawer and drawer
recess
Cleaning the debris filter
Cleaning the water hose mesh filter
Repairing a frozen washing machine
Storing your washing machine
TROUBLESHOOTING AND
INFORMATION CODES
29
30
Check these points if your washing machine...
Information codes
CYCLE CHART
31
Cycle chart
APPENDIX
32
32
32
33
Fabric care chart
Protecting the environment
Declaration of conformity
Specifications
9
17
26
29
31
32
26
27
8_ contents
WD8704EJ-02748A-01_EN.indd 8
2010-04-16 ¿ÀÈÄ 3:10:48
setting up your washing
machine
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Release lever
01 SETTING UP
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
Work top
Detergent drawer
Control panel
Plug
Door
Drain hose
Debris filter
Adjustable feet
Tub
Emergency drain tube
Filter Cover
Spanner
* Bolt hole covers
Water supply hose
Hose guide
* Bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).
setting up your new washing machine _9
WD8704EJ-02748A-01_EN.indd 9
2010-04-16 ¿ÀÈÄ 3:10:49
setting up your washing
machine
MEETING INSTALLATION REQUIREMENTS
Electrical supply and grounding
To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.
WARNING
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• 220V~240V 50Hz 15 AMP fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 4 feet (122cm) of the back of your washing machine for the
provided inlet hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
10_ setting up your new washing machine
WD8704EJ-02748A-01_EN.indd 10
2010-04-16 ¿ÀÈÄ 3:10:49
Drain
Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached at the factory.
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
01 SETTING UP
Flooring
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 51 mm
Top – 25 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 32 ˚F or 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
setting up your new washing machine _11
WD8704EJ-02748A-01_EN.indd 11
2010-04-16 ¿ÀÈÄ 3:10:49
setting up your washing
machine
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
12_ setting up your new washing machine
WD8704EJ-02748A-01_EN.indd 12
2010-04-16 ¿ÀÈÄ 3:10:50
STEP 3
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
01 SETTING UP
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
leveling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected
to the washing machine at one end and to
the water tap at the other. Do not stretch the
water supply hose. If the hose is too short,
replace the hose with a longer, high pressure
hose.
2. Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
setting up your new washing machine _13
WD8704EJ-02748A-01_EN.indd 13
2010-04-16 ¿ÀÈÄ 3:10:51
setting up your washing
machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
14_ setting up your new washing machine
WD8704EJ-02748A-01_EN.indd 14
2010-04-16 ¿ÀÈÄ 3:10:52
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
•
✗
✗
01 SETTING UP
WARNING
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
setting up your new washing machine _15
WD8704EJ-02748A-01_EN.indd 15
2010-04-16 ¿ÀÈÄ 3:10:52
setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.
60 ~ 90 cm
Drain hose
Hose guide
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
60 ~ 90 cm
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, a 230 volt 50 Hz approved electrical outlet protected by
a 15-amp fuse or comparable circuit breaker. (For more information on electrical and grounding
requirements, see page 10.)
16_ setting up your new washing machine
WD8704EJ-02748A-01_EN.indd 16
2010-04-16 ¿ÀÈÄ 3:10:54
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”)
02 WASHING A LOAD OF LAUNDRY
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 24.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not wash water-proofed items.
2.
3.
4.
5.
Close the door until it latches.
Turn the power on.
Add detergent and additives to the dispenser drawer.
Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
washing a load of laundry _17
WD8704EJ-02748A-01_EN.indd 17
2010-04-16 ¿ÀÈÄ 3:10:56
washing a load of laundry
USING THE CONTROL PANEL
1
1
2
2
3
4
1
5
6
7
8
9
10
11
12
DIGITAL GRAPHIC
DISPLAY
Displays the remaining wash cycle time, all cycle information, and error
messages.
CYCLE SELECTOR
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector”. (see page 22)
Cotton - For averagely or lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
Synthetics - For averagely or lightly soiled blouses, shirts, etc., made of
polyester (diolen, trevira), polyamide (perlon, nylon) or other similar blends.
Denim - A higher water level in the main wash and extra rinse ensure
that no washing powder remains that may mark your clothing.
Sports Wear - Use for water-proofed or proofed garments to keep their
good looks and fresh feel.
Delicates - For sheer fabrics, brassieres, lingerie, dresses, shirts and
blouses. For best results, use liquid detergent.
Wool - Only for machine-washable wool. A load should be less than 2.0 kg.
• The wool course washes the laundry using gentle cradling
actions. During the wash, the gentle cradling and soaking
actions are continued to protect the wool fibers from shrinkage /
distortion and for a super gentle clean. This stop operation is not
a problem.
• Neutral detergent is recommended for wool course, for improved
washing results and for improved care of the wool fibers.
The wool wash cycle of this machine has been approved by Woolmark
for the washing of machine-washable Woolmark products provided that
the products are washed according to the instructions on the garment
label and those issued by the manufacturer of this washing machine,
M0509 (Certificate Number issued by IWS NOM INEE Co., Ltd.)
Handwash - A very light wash cycle as gentle as a hand wash.
Air Wash - This course is useful for removing bad odors. Turning the Cycle
Selector cycles through the following operating modes.
(Deodorization  Sanitization)
• Deodorization - Reduces bad smells from the laundry
• Sanitization - Deodorize and sterilize the laundry by stronger air
wash action with higher temp.
Drying - Select to dry laundry automatically by detecting the amount and
weight of the laundry.
18_ washing a load of laundry
WD8704EJ-02748A-01_EN.indd 18
2010-04-16 ¿ÀÈÄ 3:10:56
Daily Wash - Use for everyday items such as underwear and shirts.
Quick 29’ - For lightly soiled garments that you require quickly.
Spin - Performs an additional spin cycle to remove more water.
Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
Drain Only - Turn the Cycle Selector to the Spin position, press the
Spin button, and then press the Start/Pause button to drain the water.
PREWASH
SELECTION BUTTON
Press this button to select pre-wash. Pre-wash is only available with:
Cotton, Synthetics, Denim, Sports Wear, Daily Wash.
4
DELAY END
SELECTION BUTTON
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be finished.
5
TEMPERATURE
SELECTION BUTTON
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
6
RINSE SELECTION
BUTTON
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
7
SPIN SELECTION
BUTTON
WD8704
,
, 400, 800, 1200, 1400 rpm
WD8702
,
, 400, 800, 1000, 1200 rpm
WD8700
,
, 400, 600, 800, 1000 rpm
02 WASHING A LOAD OF LAUNDRY
3
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
“Rinse Hold
” -The laundry remains soaking in the final rinse water. Before
the laundry can be unloaded, either a Drain or Spin cycle must be performed.
8
Drying BUTTON
Pressing the button cycles through the following options.
Cup Board
→ Low Temp
→ Iron
→ Time Dry
(30min. →
1:00min. → 1:30min. → 2:00min. → 2:30min. → 3:00min. → 3:30min. →
4:00min. → 4:30min.) → Cup Board
“Cup Board ” - Use this cycle to dry loads such as cotton, underwear,
and linen.
“Low Temp ” - This cycle protect heat-sensitive items at a low drying
temperature.
“Iron
” - Finishes the dry cycle in a moist state appropriate for Ironing.
“Time Dry
” -Dry the laundry for the specified period of time.
• You must avoid washing laundry that may not be dried as it may
be deformed even at low temperatures.
• The Cup Board, Low Temp, Iron and Time Dry options detect
the weight of the laundry in order to display an accurate drying
time and dry them more completely.
• The drying conditions may differ depending on the type and the
amount of laundry.
INTENSIVE WASH
SELECTION BUTTON
Press this button when the laundry is heavily soiled and needs to be
washed intensively. The cycle time is increased for each cycle.
10
SOUND OFF BUTTON
The sound can be turned off for all courses. When this function is
selected, the sound is turned off for all cycles.
• When the Sound off function is activated, the lamp on the Sound Off
button and the control panel are illuminated.
• When the Sound off function is deactivated, a buzzer will go off, and
the lamp on the button and the control panel is turned off.
11
START/PAUSE
SELECTION BUTTON
Press to pause and restart a cycle.
9
washing a load of laundry _19
WD8704EJ-02748A-01_EN.indd 19
2010-04-16 ¿ÀÈÄ 3:10:58
washing a load of laundry
12
POWER BUTTON
Press it once to turn your washing machine on, press it again to turn your
washing machine off. If the washing machine is left on for more than 10
minutes without any buttons being touched, the power automatically turns off.
Child lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen
can’t be changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function,
press the Temp. and Rinse buttons at the same time for
3 seconds. “Child Lock ” will be lit when this feature is
activated.
When the Child Lock function is activated, only the
Power button works. The Child Lock function remains
on even after the power is turned on and off or after the
disconnecting and reconnecting the power cord.
3 SEC.
Sound off
The Sound Off function can be selected during all courses. When this function is selected, sound
is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is
retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, press the Sound OFF button. The
lamp on the Sound Off button and the control panel will be lit when this feature is activated.
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
Drain Only Function
When you want just drain water from washing machine, follow directions below.
1. Press the Power button
2. Turn the Cycle Selector to the Spin positio.
3. Press the Spin button 1 times until rpm sign is off.
4. Then “1” shows up on time display in center.
5. Press the Start/Pause button.
20_ washing a load of laundry
WD8704EJ-02748A-01_EN.indd 20
2010-04-16 ¿ÀÈÄ 3:10:59
Air Wash
MODE
CYCLE TIME
Deodorization
29 min
Sanitization
59 min
When one of these options has been selected, no other button can be selected and you
can only select the delay end time from between 3:00 – 19:00.
4. Close the door and press the Start/Pause button.
•
• When there is water in the tub, Air Wash cannot be selected. Drain the water and select
Air Wash.
• Press the Start/Pause or Power button to remove the laundry.
• Fragrance or dryer sheets can be used with Air Wash programs to add fragrance to your
refreshed laundry (one sheet per one or two items).
02 WASHING A LOAD OF LAUNDRY
Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing
that can be refreshed includes woolen coats, cotton or jumpers, sweaters and suits. (Two items
or less (less than 1 kg)
1. Open the door, place the laundry into the washing machine and close the door.
2. Press the Power button.
3. Select Air Wash by turning the Cycle Selector.
• Each time the button is pressed, the operating mode cycles through the following
sequence: Deodorization, Sanitization ...
Avoid Air Wash the following clothes:
• Sensitive clothes made of leather, mink, fur, silk, etc.
• Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits may have their
decorations loosened.
• Clothes trimmed with buttons can cause them to break.
• Starchy clothes can become deformed.
• Hard bedding such as a wooden pillows (neck-rest)
- Pillows or blankets filled with plastic or starch rather than cotton
- Electric blankets
• Furry blankets
• Bulky blankets
• Latex pillow
washing a load of laundry _21
WD8704EJ-02748A-01_EN.indd 21
2010-04-16 ¿ÀÈÄ 3:10:59
washing a load of laundry
USING DRY COURSE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line
for the dried clothe of 5.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button and then press the Drying button.
: The standard course will be selected automatically.
Drying is availably selected only at the courses such as cotton, synthetics, denim and sports
wear.
3. Select Drying button as follows.
Drying Programs
• Every press of this button will select drying type repeatedly in the following order:
Cup Board
→ Low Temp
→ Iron
→ Time Dry
(30min. →1:00min. →
1:30min. → 2:00min. → 2:30min. → 3:00min. → 3:30min. → 4:00min. → 4:30min.) → Cup
Board
Drying Type
Auto
Drying
Cupboard(
Low Temp.(
Iron(
Time Drying(
)
)
)
Information
Time
(Max Load)
Standard: Dries the laundry.
160min.
) Dries the laundry at a low temperature to
protect the texture of the laundry.
160min.
For leaving items partially damp so that it can
be easily ironed
30min.
You can select the appropriate drying time
depending on the texture, quantity, and
moisture.
270min.
• It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
• For laundry weighing less than 3.5kg, use the Auto Dry. For laundry that weighs more,
please use the Time Dry.
• If both the spin and drying cycles are selected, the spin speed is automatically selected
to enhance the drying efficiency.
• When using the drying cycle, check if the water supply valve is opened.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it again.
5. Press Start/Pause button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If you select Drying function, the intensity of SPIN will be set up as High in default for
increasing the drying effect.
• If cold water is not supplied, drying will not be performed.
• If you do not take out clothes from the tub after the end of drying, a function of wrinkle
protection will be performed for about 30 minutes with the display of [End]. In order to
take out the clothes: press firstly Start/Pause or Power button and take them out.
• In case you wish to dry after hand washing, select both Spin and Dry at the same time.
22_ washing a load of laundry
WD8704EJ-02748A-01_EN.indd 22
2010-04-16 ¿ÀÈÄ 3:10:59
Washing clothes using the cycle selector
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Sports Wear, and
Daily Wash cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Sports Wear, Delicates, Wool, Hand Wash, Daily Wash, Quick
29’. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
02 WASHING A LOAD OF LAUNDRY
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing
machine. (
: No Spin,
: Rinse Hold)
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
washing a load of laundry _23
WD8704EJ-02748A-01_EN.indd 23
2010-04-16 ¿ÀÈÄ 3:10:59
washing a load of laundry
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new
woollen items, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects,
such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash
clothing with large buckles, buttons, or other heavy metal objects.
Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and
embroidered clothes inside out before washing them. If zips of pants and jackets are open while
washing, the spin basket may be damaged. Zips should be closed and fixed with a string before
washing.
Clothing with long strings may become entangled with other clothes damaging them. Be sure to
fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material
and damage the laundry. Therefore make sure to place them inside
a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
CAUTION
Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and cause an accident resulting in
injury.
24_ washing a load of laundry
WD8704EJ-02748A-01_EN.indd 24
2010-04-16 ¿ÀÈÄ 3:11:00
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
Please note the following when using the Wool course.
• Use a neutral liquid detergent for wool only.
• When using a powder detergent, it may remain on the laundry and cause damage to the
material (wool).
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do NOT open the detergent drawer when your washing machine is running.
02 WASHING A LOAD OF LAUNDRY
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate
items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
1. Pull out the detergent drawer on the left side of the control
panel.
2. Add the recommended amount of laundry detergent
directly into the detergent compartment
before starting
your washing machine.
3. Add the recommended amount of fabric softener into the
softener compartment
if required.
CAUTION
Do NOT add any powder/liquid detergent to the softener
compartment ( ).
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash
compartment .
When washing large items do NOT use the following
detergetnt types.
• Tablet and capsule type detergents
• Detergents using a ball and net
MAX
Concentrated or thick fabric softener and conditioner
must be diluted with a little water before being poured
into the dispenser (prevents the overflow from becoming
blocked.)
Be careful that the fabric softener does not overflow, when you close the detergent drawer
after adding fabric softener into the rinse detergent compartment.
washing a load of laundry _25
WD8704EJ-02748A-01_EN.indd 25
2010-04-16 ¿ÀÈÄ 3:11:00
cleaning and maintaining your
washing machine
Keeping your washing machine clean improves its performance, wards off
unnecessary repairs, and lengthens its life.
DRAINING THE WASHING MACHINE IN AN EMERGENCY
1. Unplug the washing machine from the power supply.
2. Open the filter cover using a coin or a key.
Filter cover
3. Unscrew the emergency drain cap by turning it to the left.
Emergency
drain cap
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
6. Reinsert the drain tube and screw the cap back on.
7. Replace the filter-cover.
Emergency
drain tube
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a
nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
26_ cleaning and maintaining your washing machine
WD8704EJ-02748A-01_EN.indd 26
2010-04-16 ¿ÀÈÄ 3:11:01
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS
1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Remove the liquid detergent divider from the
detergent drawer
Release lever
Liquid detergent divider
03 CLEANING AND MAINTAINING
3. Wash all parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Replace the liquid detergent divider by pushing it firmly into
the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is
displayed. (Refer to “Draining the washing machine in an emergency” in the previous page.)
1. Open the filter cover by using a key or coin.
2. Unscrew the emergency drain cap by turning it to the left
and drain off all the water.
3. Unscrew the debris filter cap.
Debris filter cap
4. Wash any dirt or other material from the debris filter. Make
sure the drain pump propeller behind the debris filter is not
blocked.
5. Replace the debris filter cap.
6. Replace the filter cover.
cleaning and maintaining your washing machine _27
WD8704EJ-02748A-01_EN.indd 27
2010-04-16 ¿ÀÈÄ 3:11:02
cleaning and maintaining your
washing machine
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1.
2.
3.
4.
5.
Unplug the washing machine.
Pour warm water over the tap to loosen the water supply hose.
Remove the water supply hose and soak it in warm water.
Pour warm water into the washing machine drum and let it sit for 10 minutes.
Reconnect the water supply hose to the water tap and check if the water supply and drain
are operating normal.
STORING YOUR WASHING MACHINE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Quick 29’ cycle and add bleach to the bleach compartment. Run your washing
machine through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine
door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any
leftover water in your washing machine to thaw out before using it.
28_ cleaning and maintaining your washing machine
WD8704EJ-02748A-01_EN.indd 28
2010-04-16 ¿ÀÈÄ 3:11:03
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
04 TROUBLESHOOTING
PROBLEM
SOLUTION
Will not start
•
•
•
•
Make sure your washing machine is plugged in.
Make sure the door is firmly closed.
Make sure the water source tap(s) are turned on.
Make sure to press the Start/Pause button.
Has no water or not enough
water
•
•
•
•
Turn the water tap on fully.
Make sure the water source hose is not frozen.
Straighten the water intake hoses.
Clean the filter on the water intake hose.
Has detergent remains in
the detergent drawer after
the wash cycle is complete
•
Make sure your washing machine is running with sufficient water
pressure.
Make sure the detergent is added to the center of the detergent
drawer.
Vibrates or is too noisy
•
•
•
•
•
Make sure your washing machine is on a level surface. If the surface
is not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does
not drain and/or spin
•
•
Straighten the drain hose. Eliminate kinked hoses.
Make sure the debris filter is not clogged.
Door is locked shut or will
not open.
•
The door will not open until 3 minutes after the machine stops or the
power turns off.
If the problem persists, contact your local Samsung Customer Service.
troubleshooting and information codes _29
WD8704EJ-02748A-01_EN.indd 29
2010-04-16 ¿ÀÈÄ 3:11:03
troubleshooting and
information codes
INFORMATION CODES
When your washing machine malfunctions, you may see an information code on the display. If that
happens, check this table and try the suggested solution before calling Customer Service.
CODE SYMBOL
SOLUTION
dE
•
Close the door.
4E
•
•
Make sure the source water tap is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of jeans, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
•
It appears when the internal temperature of the drum is high.
The fan will automatically function, so just wait until “Hot” indication
disappeared.
UE
cE/3E
Hot
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
30_ troubleshooting and information codes
WD8704EJ-02748A-01_EN.indd 30
2010-04-16 ¿ÀÈÄ 3:11:03
cycle chart
CYCLE CHART
( user option)
DETERGENT
Pre-wash
wash
Softener
Cotton

yes

95
Synthetics

yes

60
Denim

yes

60
Sports Wear

yes

60
Delicates
-
yes
-
40
Wool
-
yes
-
40
Handwash
-
yes

40
Deodorization
-
-
-
-
Sanitization
-
-
-
-
Drying
-
-
-
-
Daily Wash

yes

60
Quick 29’
-
yes

60
Spin Speed(MAX) rpm
PROGRAM
Delay end
Cycle time
(min)
1000

120
1200
1000

90
800
800

78
1200
1200
1000

72
800
800
800

50
WD8704
WD8702
WD8700
Cotton
1400
1200
Synthetics
1200
Denim
800
Sports Wear
Delicates
Wool
800
800
800

38
Handwash
400
400
400

31
Deodorization
-
-
-

29
Sanitization
-
-
-

59
Drying
-
-
-

160
Daily Wash
1200
1200
1000

70
Quick 29’
1400
1200
1000

29
05 CYCLE CHART
Max Temp
(˚C)
PROGRAM
1. A cycle with a prewash takes approx. 15 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN
60456.
3. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
4. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
cycle chart _31
WD8704EJ-02748A-01_EN.indd 31
2010-04-16 ¿ÀÈÄ 3:11:03
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing, and dry cleaning when necessary.
The use of symbols ensures consistency among garment manufacturers of domestic and imported items.
Follow the care label directions to maximize garment life and reduce laundering problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
DECLARATION OF CONFORMITY
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
32_ appendix
WD8704EJ-02748A-01_EN.indd 32
2010-04-16 ¿ÀÈÄ 3:11:07
SPECIFICATIONS
TYPE
FRONT LOADING WASHING MACHINE
DIMENSIONS
W598mm X D600mm X H844mm
50 kPa ~ 800 kPa
WATER PRESSURE
WATER VOLUME
56 ℓ
GROSS WEIGHT
MODEL
SPIN REVOLUTIONS
WD8700CJ/
WD8700DJ/
WD8700EJ/
WD8700RJ
75 kg
74 kg
73 kg
WD8704CJ/WD8704DJ/WD8704EJ/WD8704RJ
WD8702CJ/WD8702DJ/WD8702EJ/WD8702RJ
WD8700CJ/WD8700DJ/WD8700EJ/WD8700RJ
150 W
240 V
150 W
WASH AND
HEATING
220 V
2000 W
240 V
2400 W
DRYING
230V
1600W
SPIN
PACKAGE WEIGHT
WD8702CJ/
WD8702DJ/
WD8702EJ/
WD8702RJ
220 V
WASHING
POWER CONSUMPTION
WD8704CJ/
WD8704DJ/
WD8704EJ/
WD8704RJ
06 APPENDIX
WD8704CJ/WD8704DJ/WD8704EJ/WD8704RJ
WD8702CJ/WD8702DJ/WD8702EJ/WD8702RJ
WD8700CJ/WD8700DJ/WD8700EJ/WD8700RJ
MODEL
WD8704CJ/
WD8704DJ/
WD8704EJ/
WD8704RJ
WD8702CJ/
WD8702DJ/
WD8702EJ/
WD8702RJ
WD8700CJ/
WD8700DJ/
WD8700EJ/
WD8700RJ
230V
350 W
250 W
200 W
PUMPING
34 W
MODEL
WD8704CJ/WD8704DJ/WD8704EJ/WD8704RJ
WD8702CJ/WD8702DJ/WD8702EJ/WD8702RJ
WD8700CJ/WD8700DJ/WD8700EJ/WD8700RJ
PAPER
2.5 kg
PLASTIC
2.5 kg
MODEL
WD8704CJ/
WD8704DJ/
WD8704EJ/
WD8704RJ
WD8702CJ/
WD8702DJ/
WD8702EJ/
WD8702RJ
WD8700CJ/
WD8700DJ/
WD8700EJ/
WD8700RJ
rpm
1400
1200
1000
The appearance and specifications of the product are subject to change without prior notice for purposes
of product enhancement.
appendix _33
WD8704EJ-02748A-01_EN.indd 33
2010-04-16 ¿ÀÈÄ 3:11:07
memo
WD8704EJ-02748A-01_EN.indd 34
2010-04-16 ¿ÀÈÄ 3:11:07
memo
WD8704EJ-02748A-01_EN.indd 35
2010-04-16 ¿ÀÈÄ 3:11:07
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
Code No. DC68-02748A-01_EN
WD8704EJ-02748A-01_EN.indd 36
2010-04-16 ¿ÀÈÄ 3:11:07