Sony | CMT-BT80WB | Sony CMT-BT80W Startup Guide

A
Enjoy Music with Xperia/iPhone
via a Wireless Network
Quick Setup Guide
Making a wireless connection between this system and a
wireless LAN router with WPS
1 from
Check that the network (LAN) cable is disconnected
the system then connect the power cord.
6 Hold
the WPS button on the wireless LAN router
pressed for more than 3 seconds.
2 Press the / button to turn the system on.
3 Check
that the STANDBY indicator lit in red turns off
and that
starts flashing in the display window.
7 “CONNECT”
flashes after “WPS” flashes for several
tens of seconds in the display window of the
It may take several minutes until
STANDBY indicator
starts flashing.
/ button
Display window
This leaflet is a setup guide for enjoying music from your Xperia (or Xperia Tablet)/iPhone (or iPad/iPod) with DLNA or
AirPlay function via a wireless network.
system, after which
completed.
will light once connection is
If
does not appear within 5 minutes or so, the setup may not have
been completed properly. In that case, proceed from step 4 again.
If the setup does not become successful after that, try connection
on the reverse side of this leaflet.
8 Check
that the connection between your smartphone
and the wireless LAN router has been made properly.
A wireless LAN router (including an access point) is necessary in order to use the wireless network.
When the connection is complete
4-456-709-12(1)
© 2013 Sony Corporation Printed in China
Personal Audio System
4 “BTNW:STBY.”
Press the OPTIONS button on the remote to display
Press the / button on the remote
repeatedly to select “WPS” then press the
button.
If “WPS” does not appear,
wait about 2 minutes.
//
CMT-BT80W/BT80WB
Playing music stored in Xperia/iPhone
When the connection is not complete
Follow the steps below.
Make sure that your wireless LAN router is turned on then have your
SSID and Security key on the space below.
For details, refer to the operating instructions of the wireless LAN
router.
SSID
Refer to the operating instructions of this system in the cases below.
ˎˎ To play music with another smartphone or a personal computer
ˎˎ When the “WALKMAN” application is not installed on your Xperia
*
5 When
“OK” appears on the display, press the
button.
Connecting Xperia/iPhone and the wireless LAN
Connecting Xperia/iPhone and the wireless LAN
Is there a WPS button on your wireless
LAN router?
Connecting Xperia with the wireless LAN
Making a wireless connection between this system
and a wireless LAN router with WPS
Playing music stored in Xperia
Making a wireless connection between this system
and a wireless LAN router with Xperia/iPhone
application “NS Setup”
Select the SSID you
had in step 8 from the
network list and enter
the Security key to
connect.
For details, refer to the
operating instructions
of your iPhone.
After setup has been
completed, go to
“Playing music stored
in Xperia/iPhone.“
Tap [Settings].
([WALKMAN]
application).
 Tap the
icon and select
[SONY:CMT-BT80W(B)XXXXXX].
“NETWORK” appears
on the display window
of the system during
music play.
Tap [Wi-Fi].
Connecting iPhone with the wireless LAN
*Your Xperia may not have the “WALKMAN” application. In that case, this function cannot be used. You can listen to music with some models of “WALKMAN” with
this function, but they may require different operation. Refer to the operating instructions of your “WALKMAN” for details.
Playing music stored in Xperia/iPhone
Launch
Select the SSID you
had in step 8 from the
network list and enter
the Security key to
connect.
For details, refer to the
operating instructions
of Xperia.
After setup has been
completed, go to
“Playing music stored
in Xperia/iPhone.“
Tap [Settings].
No
SSID:
Security key:
“WPS” flashes.
ˎˎ To play music with BLUETOOTH
Yes
Security key
Tap [Wi-Fi].
Playing music stored in iPhone
Launch
([Music]
application).
 Tap the
icon and select
[SONY:CMT-BT80W(B)XXXXXX].
“AirPlay” appears
on the display
window of the
system during
music play.
B
Making a wireless connection between this system and a wireless LAN router with Xperia/iPhone application “NS Setup”
Download the application “NS Setup” to your smartphone and perform setup by following the steps below in order to make a connection between this system and your wireless LAN router.
1 Check
that the network (LAN) cable is disconnected
from the system then connect the power cord.
2 then
Make sure that your wireless LAN router is turned on
have your SSID and Security key on the space
3 Press the / button to turn the system on.
below.
STANDBY indicator
/ button
Display window
For details, refer to the operating instructions of the wireless LAN router.
SSID
4 Check
that the STANDBY indicator lit in red turns off
and that
starts flashing in the display window.
It may take several minutes until
starts flashing.
Once you see the indicator start flashing, perform setup by using the
smartphone application “NS Setup.“
For a user of Xperia
Setup in Xperia
For a user of iPhone
Setup in iPhone
Security key
SSID:
Security key:
Setup in Xperia
Playing music stored in Xperia
 Download the free application  Perform setup by using the application “NS Setup.”
Launch
([WALKMAN]
application).
“NS Setup” from “Google Play.”
 Tap the
icon and select
[SONY:CMT-BT80W(B)XXXXXX] to
play music.
“NETWORK” appears
on the display window
of the system during
music play.
The system is checking
whether or not the setup has
been performed properly.
Wait several minutes until the
next display appears.
If  in “Troubleshooting”
below appears, follow its
instructions.
The system is preparing for
the wireless setting. Wait
several minutes until the next
display appears.
For downloading
by 2D Code
Tap [NS Setup].
Tap [Let’s get
started].
Select the SSID you
had in step 2.
Enter the Security
key you had in
step 2.
Tap [Play test sound]
to confirm operation
of the system by
playing the test sound.
Setup in iPhone
Playing music stored in iPhone
 Download the free application  Perform setup by using the application [NS Setup].
Launch
“NS Setup” from “Apple Store.”
The system is checking
whether or not the setup
has been performed
properly. Wait several
minutes until the next
display appears.
If  or  in
“Troubleshooting” below
appears, follow its
instructions.
The system is preparing
for the wireless setting.
Wait several minutes
until the next display
appears.
If  in “Troubleshooting”
below appears, follow its
instructions.
For downloading
by 2D Code
Tap [Settings].
Tap [Wi-Fi].
Tap [Sony_
Wireless_...]*1 to add
a checkmark then
return to the home
display.
Tap [NS Setup].
Tap [Let’s Get
Started].
Select the SSID you
had in step 2.*2
*1 It may take several minutes until [Sony_Wireless Audio_Setup] appears. If it does not appear, reset the system by following “To reset the system” in “Troubleshooting.” *2 If the SSID does not appear, tap the
Troubleshooting
Enter the Security
key you had in
step 2.
 Tap the
icon and select
[SONY:CMT-BT80W(B)XXXXXX] to
play music.
“AirPlay” appears
on the display
window of the
system during
music play.
Tap [Play Test
Sound] to confirm
operation of the
system by playing
the test sound.
icon at the upper right to update the display.
To reset the system
Reset the system as follows.
Also, If “Sony_Wireless_Audio_Setup” is not displayed during setup of iPhone, reset the system.
The displays below may appear during setup. In these cases, follow their instructions.

([Music]
application).


If  or  appears,
reset the system by
following the steps in
“To reset the system.”
Then perform the
setup operations
again from the first
step of  in “Setup
in Xperia” or “Setup
in iPhone.”

If  appears, perform
the setup operations
again from the first
step of  in “Setup in
iPhone.”
If  appears, operate
by following the
instructions on the
display.
If the setup does not become
successful after that or if “NO
CONNECT” appears in the
display window of the system,
reset the system by following
the steps in “To reset the
system.”
1
Disconnect the power cord from the wall outlet and make sure that the STANDBY indicator does not light. Then reconnect the
power cord and turn the system on.
2
Hold the  (stop) and / buttons of the system pressed until “ALLRESET” appears.
STANDBY indicator
/ button
 (stop) button
Download PDF