Sony SRS-X55 Portable Wireless BLUETOOTH® Speaker Startup Guide
Add to my manuals2 Pages
Sony SRS-X55 is a portable audio system that allows you to wirelessly connect and stream audio from your Bluetooth-enabled devices. It features NFC (Near Field Communication) technology for quick and easy pairing with compatible smartphones. With a built-in rechargeable lithium-ion battery, you can enjoy hours of music without being tethered to an outlet. The SRS-X55 is perfect for personal use or small gatherings, delivering clear and powerful audio with its full-range speaker.
advertisement
Personal Audio System
SRS-X55
4-565-69321 (2)
Startup Guide
Guide de démarrage
Guía de inicio
Einführungsanleitung
Beknopte gids
Guida di avvio
©2015 Sony Corporation Printed in China
English
Manuals supplied
Startup Guide (this document)
Provides you with instructions on how to connect the unit with
BLUETOOTH devices and basic operations.
Reference Guide
Provides you with precautions and product specifications.
Help Guide
Read the Help Guide on your computer or smartphone, when you want to know how to use the unit in greater detail. The Help Guide also contains a troubleshooting guide which provides you with remedies for the problems you might encounter.
URL: http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Two-dimensional code:
Charging the Unit
This unit has a built-in lithium-ion rechargeable battery. Charge the battery before using the unit for the first time.
Note
• Attach a plug appropriate to your country/region to the AC adaptor beforehand.
Be sure to completely insert the plug into the AC adaptor until it clicks.
Lit (orange)
AC adaptor
(supplied)
DC IN
Charging starts when the unit is connected to an AC outlet via the AC adaptor, and the CHARGE indicator lights up orange. Charging is completed in about four hours and the indicator goes off.
How to Make Wireless Connection with
BLUETOOTH Devices
Select your case from the 3 pairing types, below. BLUETOOTH devices need to be
“paired” with each other beforehand.
Pairing and connecting with a BLUETOOTH device
The unit can be paired with up to eight BLUETOOTH devices. When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.
1
Press the / (power) button to turn on this unit.
The / (power) indicator lights up green.
Lit
(green)
Connecting with a paired BLUETOOTH device
1
Turn on this unit.
2
Tap the (BLUETOOTH) PAIRING button.
The (BLUETOOTH) indicator begins to flash white.
3
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the (BLUETOOTH) indicator on the unit stays lit.
Connecting with a smartphone by Onetouch (NFC)
By touching the unit with a smartphone, the unit is turned on automatically and then proceeds to pairing and BLUETOOTH connection.
Compatible smartphones
NFC-compatible smartphones with Android ™ 2.3.3 or later installed
NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags.
Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be achieved easily by simply touching NFC compatible devices together (i.e., at the N-Mark symbol or location designated on each device).
1
Set the NFC function of the smartphone to on.
For details, refer to the operating instructions supplied with the smartphone.
• If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1: proceed to step 2.
• If your smartphone OS is Android 4.1 or later: proceed to step 4.
2
Download and install the app “NFC Easy Connect.”
“NFC Easy Connect” is a free Android app you can download from Google
Play ™ .
Download the app by searching for “NFC Easy Connect” or access it by using the following two-dimensional code. Fees may be charged for downloading the app.
To download by the two-dimensional code, use a two-dimensional code reader app.
Note
• The app may not be available in some countries and/or regions.
3
Start “NFC Easy Connect” on the smartphone.
Make sure that the app screen is displayed.
4
Touch this unit with the smartphone.
Unlock the screen of the smartphone beforehand.
Keep touching the smartphone on the N marked part of the unit until the smartphone responds. If the unit is off, it will turn on when the smartphone touches it.
Smartphone responds
(unit recognized)
Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, the (BLUETOOTH) indicator on the unit stays lit.
To disconnect, touch the unit with the smartphone again.
Hint
If you cannot connect the unit, try the following.
• Start the app on the smartphone, and move the smartphone slowly over the N marked part of the unit.
• If the smartphone is in a case, remove it from the case.
• Make sure that the app screen is displayed on the smartphone.
Listening and Calling
Operate the unit after making BLUETOOTH connection with your BLUETOOTH device.
Listening to music
Profile: A2DP, AVRCP
Start playback on the BLUETOOTH device, and adjust the volume.
Set the volume on the connected device or with the VOL –/+ buttons on the unit.
Français
Manuels fournis
Guide de démarrage (le présent document)
Ce guide fournit des instructions sur la procédure de connexion de l’appareil aux périphériques BLUETOOTH et décrit les fonctions de base.
Guide de référence
Ce guide fournit les spécifications du produit et vous informe des précautions à prendre pour l’utiliser.
Guide d’aide
Consultez le Guide d’aide sur votre ordinateur ou votre smartphone lorsque vous voulez utiliser les fonctions plus avancées de l’appareil. Le
Guide d’aide contient également un guide de dépannage qui propose des solutions aux problèmes que vous pouvez rencontrer.
URL : http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Code en deux dimensions :
Chargement de l’appareil
L’appareil est équipé d’une batterie rechargeable lithium-ion intégrée.
Rechargez la batterie avant d’utiliser l’appareil pour la première fois.
Remarque
• Fixez préalablement à l’adaptateur secteur une fiche adaptée à votre pays/région.
Veillez à insérer la fiche à fond dans l’adaptateur secteur jusqu’à ce qu’elle émette un déclic.
Allumé (orange)
2
Appuyez sur la touche (BLUETOOTH) PAIRING.
Le témoin (BLUETOOTH) se met à clignoter en blanc.
Clignote
(blanc)
Adaptateur secteur (fourni)
DC IN
Le chargement démarre lorsque l’appareil est connecté à une prise secteur via l’adaptateur secteur et que le témoin CHARGE (orange) s’allume. Le chargement dure environ quatre heures et le témoin s’éteint.
Comment établir une connexion sans fil avec des périphériques BLUETOOTH
Parmi les 3 types de pairage ci-dessous, sélectionnez celui qui correspond à votre cas.
Les périphériques BLUETOOTH doivent être préalablement « pairés » l’un à l’autre.
Pairage et connexion à un périphérique
BLUETOOTH
L’appareil peut être pairé à huit périphériques BLUETOOTH maximum. En cas de pairage à deux périphériques BLUETOOTH ou davantage, appliquez la procédure de pairage suivante pour chaque périphérique.
1
Appuyez sur la touche / (alimentation) pour mettre cet appareil sous tension.
Le témoin / (alimentation) s’allume en vert.
Allumé
(vert)
Connexion à un smartphone par simple contact (NFC)
Si vous mettez l’appareil en contact avec un smartphone, il se met automatiquement sous tension, puis effectue le pairage et établit la connexion
BLUETOOTH.
Smartphones compatibles
Smartphones compatibles NFC avec Android ™ 2.3.3 ou ultérieur installé
NFC
La NFC (Near Field Communication, communication en champ proche) est une technologie permettant d’établir une communication sans fil à courte portée entre différents périphériques, comme les smartphones et les étiquettes IC.
Grâce à la fonction NFC, la communication des données (par exemple, le pairage BLUETOOTH) peut être facilement réalisée en mettant simplement en contact des périphériques compatibles NFC (autrement dit, au niveau du symbole du repère N ou de l’emplacement désigné sur chaque appareil).
1
Activez la fonction NFC du smartphone.
Pour plus de détails, reportez-vous au mode d’emploi fourni avec le smartphone.
• Si le système d’exploitation de votre smartphone est Android 2.3.3 ou une version ultérieure, mais antérieure à Android 4.1 : passez à l’étape 2.
• Si le système d’exploitation de votre smartphone est Android 4.1 ou une version ultérieure, passez à l’étape 4.
2
Téléchargez et installez l’application « Connexion NFC facile ».
« Connexion NFC facile » est une application Android gratuite que vous pouvez télécharger sur Google Play ™ .
Téléchargez l’application en recherchant « Connexion NFC facile » ou accédez-y à l’aide du code en deux dimensions suivant. Le téléchargement de l’application peut être payant.
Pour télécharger à l’aide du code en deux dimensions, utilisez une application de lecture de code en deux dimensions.
Remarque
• Il est possible que l’application ne soit pas disponible dans certains pays et/ou dans certaines régions.
3
Démarrez l’application « Connexion NFC facile » sur le smartphone.
Vérifiez que l’écran de l’application est affiché.
4
Mettez l’appareil en contact avec le smartphone.
Déverrouillez préalablement l’écran du smartphone.
Maintenez le contact avec le smartphone sur la zone de l’appareil marquée N jusqu’à ce que le smartphone réagisse. Si l’appareil est hors tension, il se met sous tension lorsque le smartphone entre en contact avec lui.
Le smartphone réagit
(appareil reconnu)
Pour établir la connexion, conformez-vous aux instructions affichées.
Lorsque l’appareil est connecté au périphérique BLUETOOTH, le témoin
(BLUETOOTH) de l’appareil reste allumé.
Pour le déconnecter, mettez-le à nouveau en contact avec le smartphone.
Conseil
Si vous ne parvenez pas à connecter l’appareil, essayez ce qui suit.
• Démarrez l’application sur le smartphone et déplacez lentement le smartphone sur le repère N de l’appareil.
• Si le smartphone se trouve dans un étui, sortez-le de celui-ci.
• Vérifiez que l’écran de l’application est affiché sur le smartphone.
Écoute et appel
Utilisez l’appareil après avoir établi la connexion BLUETOOTH avec votre périphérique BLUETOOTH.
Écoute de musique
Profil : A2DP, AVRCP
Démarrez la lecture sur l’appareil BLUETOOTH et réglez le volume.
Réglez le volume sur le périphérique raccordé ou avec les touches VOL –/+ de l’appareil.
Conseil
• Pour plus d’informations sur la lecture par l’intermédiaire d’une connexion au moyen de la prise AUDIO IN, reportez-vous au Guide d’aide.
Passer un appel/Recevoir un appel
Profil : HSP, HFP
Microphone 2
Tap the (BLUETOOTH) PAIRING button.
The (BLUETOOTH) indicator begins to flash white.
Flashing
(white)
When you use the BLUETOOTH function for the first time, and when you only tap the (BLUETOOTH) PAIRING button, the (BLUETOOTH) indicator will begin to flash white quickly and the unit enters pairing mode automatically.
3
Tap and hold the (BLUETOOTH) PAIRING button until beeps are heard and the (BLUETOOTH) indicator begins to flash white quickly.
The unit enters pairing mode.
Fast flashing
(white)
4
Perform the pairing procedure on the BLUETOOTH device to detect this unit.
When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-X55.”
If passkey input is required on the display of a BLUETOOTH device, input
“ 0000 .”
5
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the (BLUETOOTH) indicator on the unit stays lit.
Hint
• For details about playback through connection via the AUDIO IN jack, refer to the
Help Guide.
Making a call/Receiving a call
Profile: HSP, HFP
Microphone
Lorsque vous utilisez la fonction BLUETOOTH pour la première fois ou si vous appuyez uniquement sur la touche (BLUETOOTH) PAIRING, le témoin (BLUETOOTH) se met à clignoter rapidement en blanc et l’appareil passe automatiquement en mode de pairage.
3
Maintenez la touche (BLUETOOTH) PAIRING enfoncée jusqu’à l’émission d’un signal sonore et jusqu’à ce que le témoin (BLUETOOTH) se mette à clignoter rapidement en blanc.
L’appareil passe en mode de pairage.
Clignote rapidement
(blanc)
Operate your smartphone to make a call.
To terminate a call, press the button on the unit.
Press the button on the unit when an incoming call arrives.
Operate in the same way when an incoming call arrives while you are listening to music.
• The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.
• Android and Google Play are trademarks of Google Inc.
• Other trademarks and trade names are those of their respective owners.
4
Effectuez la procédure de pairage sur le périphérique
BLUETOOTH pour détecter cet appareil.
Lorsque la liste de périphériques détectés apparaît sur l’écran du périphérique BLUETOOTH, sélectionnez « SRS-X55 ».
Si la saisie d’une clé d’authentification est requise sur l’écran du périphérique BLUETOOTH, saisissez « 0000 ».
5
Établissez la connexion BLUETOOTH à partir du périphérique
BLUETOOTH.
Lorsque l’appareil est connecté au périphérique BLUETOOTH, le témoin
(BLUETOOTH) de l’appareil reste allumé.
Connexion à un périphérique BLUETOOTH pairé
1
Mettez cet appareil sous tension.
2
Appuyez sur la touche (BLUETOOTH) PAIRING.
Le témoin (BLUETOOTH) se met à clignoter en blanc.
3
Établissez la connexion BLUETOOTH à partir du périphérique
BLUETOOTH.
Lorsque l’appareil est connecté au périphérique BLUETOOTH, le témoin
(BLUETOOTH) de l’appareil reste allumé.
Utilisez votre smartphone pour passer un appel.
Pour mettre fin à un appel, appuyez sur la touche de l’appareil.
Appuyez sur la touche de l’appareil lorsqu’un appel entrant se produit.
Procédez de la même façon lorsqu’un appel entrant se produit quand vous
écoutez de la musique.
• La marque BLUETOOTH® et les logos appartiennent à Bluetooth SIG, Inc. et doivent
être utilisés par Sony Corporation uniquement sous licence.
• La marque N est une marque commerciale ou une marque commerciale déposée de
NFC Forum, Inc., aux États-Unis et dans d’autres pays.
• Android et Google Play sont des marques commerciales de Google Inc.
• Les autres marques commerciales et noms commerciaux appartiennent à leurs propriétaires respectifs.
Español
Manuales suministrados
Guía de inicio (este documento)
Proporciona instrucciones para conectar la unidad con dispositivos
BLUETOOTH y para realizar las operaciones básicas.
Guía de referencia
Muestra las precauciones y las características técnicas del producto.
Guía de ayuda
Lea la Guía de ayuda en el ordenador o el teléfono inteligente si necesita saber más detalles acerca de cómo usar la unidad. La Guía de ayuda también contiene una guía de solución de problemas, que le ofrece soluciones para los problemas más habituales.
URL: http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Código bidimensional:
Carga de la unidad
La unidad incluye una batería de iones de litio recargable incorporada. Cargue la batería antes de utilizar la unidad por primera vez.
Nota
• Conecte primero una clavija apropiada para su país/región al adaptador de CA.
Asegúrese de introducir completamente la clavija en el adaptador de CA hasta que encaje perfectamente.
Encendido
(naranja)
Adaptador de CA
(suministrado)
Conexión con un teléfono inteligente con un solo toque (NFC)
Con tan solo tocar la unidad con un teléfono inteligente, la unidad se enciende automáticamente y se empareja y conecta mediante BLUETOOTH con el teléfono inteligente.
Teléfonos inteligentes compatibles
Teléfonos inteligentes compatibles con la función NFC con Android ™ 2.3.3 o posterior
NFC
NFC (Near Field Communication, Transmisión de datos en proximidad) es una tecnología que permite la comunicación inalámbrica de corto alcance entre diversos dispositivos, como teléfonos inteligentes y etiquetas IC. Gracias a la función NFC, es posible transmitir fácilmente datos (como el emparejamiento a través de BLUETOOTH) con solo tocar dispositivos compatibles con NFC (por ejemplo, en la marca N o el área designada en cada dispositivo).
1
Active la función NFC en el teléfono inteligente.
Para obtener más información, consulte las instrucciones suministradas con el teléfono inteligente.
• Si el sistema operativo de su teléfono inteligente es Android 2.3.3 o posterior y anterior a Android 4.1, vaya al paso 2.
• Si el sistema operativo de su teléfono inteligente es Android 4.1 o posterior, vaya al paso 4.
2
Descargue e instale la aplicación “Conexión fácil NFC”.
“Conexión fácil NFC” es una aplicación gratuita para Android disponible en
Google Play ™ .
Busque “Conexión fácil NFC” o escanee el siguiente código bidimensional para descargar e instalar la aplicación. Es necesario abonar los costes de comunicación para descargar la aplicación.
Para realizar la descarga mediante el código bidimensional, utilice una aplicación de lectura de códigos bidimensionales.
Nota
• Puede que la aplicación no esté disponible en algunos países y/o regiones.
3
Inicie la aplicación “Conexión fácil NFC” en el teléfono inteligente.
Asegúrese de que se muestre la pantalla de la aplicación.
4
Toque esta unidad con el teléfono inteligente.
Desbloquee primero la pantalla del teléfono inteligente.
Siga tocando la parte de la unidad que tiene la marca N con el teléfono inteligente hasta que este responda. Si la unidad está apagada, se encenderá al contacto con el teléfono inteligente.
El teléfono inteligente responde
(reconocimiento de la unidad)
DC IN
La carga empieza al conectar la unidad a una toma de CA a través del adaptador de CA y cuando el indicador CHARGE se ilumina de color naranja. La carga finaliza transcurridas aproximadamente cuatro horas, cuando se apaga el indicador.
Cómo establecer una conexión inalámbrica con dispositivos BLUETOOTH
De los siguientes tres métodos de conexión, elija el más adecuado para su situación.
Los dispositivos BLUETOOTH deben “emparejarse” los unos con los otros de antemano.
Emparejamiento y conexión con un dispositivo BLUETOOTH
La unidad puede emparejarse con un máximo de ocho dispositivos BLUETOOTH.
Si empareja dos dispositivos BLUETOOTH o más, siga las siguientes instrucciones de emparejamiento con cada dispositivo.
1
Pulse el botón / (encendido) para encender esta unidad.
El indicador / (encendido) se ilumina de color verde.
Encendido
(verde)
2
Pulse el botón (BLUETOOTH) PAIRING.
El indicador (BLUETOOTH) empieza a parpadear de color blanco.
Parpadeo
(blanco)
Siga las instrucciones que aparecen en pantalla para establecer la conexión.
Una vez establecida la conexión BLUETOOTH, el indicador (BLUETOOTH) de la unidad permanece encendido.
Toque de nuevo la unidad con el teléfono inteligente para desconectarlo.
Sugerencias
Si hay problemas para establecer la conexión, intente lo siguiente.
• Active la aplicación en el teléfono inteligente y mueva el teléfono inteligente despacio sobre la parte de la unidad que tiene la marca N.
• Si el teléfono se encuentra en el interior de una funda, quítela.
• Asegúrese de que se muestre la pantalla de la aplicación en el teléfono inteligente.
Escuchar música y realizar llamadas
Utilice la unidad después de establecer la conexión BLUETOOTH con su dispositivo
BLUETOOTH.
Escuchar música
Perfil: A2DP, AVRCP
Inicie la reproducción en el dispositivo BLUETOOTH y, a continuación, ajuste el volumen.
Ajuste el volumen en el dispositivo conectado o con los botones VOL –/+ de la unidad.
Cuando utilice la función BLUETOOTH por primera vez y si solo pulsa el botón (BLUETOOTH) PAIRING, el indicador (BLUETOOTH) empieza a parpadear rápidamente de color blanco y la unidad pasa automáticamente al modo de emparejamiento.
3
Mantenga pulsado el botón (BLUETOOTH) PAIRING hasta que escuche pitidos y el indicador (BLUETOOTH) empiece a parpadear rápidamente de color blanco.
La unidad pasa al modo de emparejamiento.
Parpadeo rápido
(blanco)
Sugerencia
• Para obtener más información sobre la reproducción mediante la conexión a través de la toma AUDIO IN, consulte la Guía de ayuda.
Cómo realizar/recibir una llamada
Perfil: HSP, HFP
Micrófono
4
Lleve a cabo el procedimiento de emparejamiento en el dispositivo BLUETOOTH para detectar esta unidad.
Si aparece una lista de dispositivos detectados en la pantalla del dispositivo BLUETOOTH, seleccione “SRS-X55”.
Si se requiere la introducción de un código de acceso para el dispositivo
BLUETOOTH, introduzca “ 0000 ”.
5
Establezca la conexión BLUETOOTH desde el dispositivo
BLUETOOTH.
Una vez establecida la conexión BLUETOOTH, el indicador (BLUETOOTH) de la unidad permanece encendido.
Conexión con un dispositivo BLUETOOTH emparejado
1
Encienda esta unidad.
2
Pulse el botón (BLUETOOTH) PAIRING.
El indicador (BLUETOOTH) empieza a parpadear de color blanco.
3
Establezca la conexión BLUETOOTH desde el dispositivo
BLUETOOTH.
Una vez establecida la conexión BLUETOOTH, el indicador (BLUETOOTH) de la unidad permanece encendido.
Utilice el teléfono inteligente para realizar una llamada.
Para finalizar una llamada, pulse el botón en la unidad.
Pulse el botón en la unidad cuando reciba una llamada entrante.
Realice la misma acción cuando reciba una llamada entrante mientras escucha música.
• La marca de la palabra BLUETOOTH® y sus logotipos son propiedad de Bluetooth
SIG, Inc., y cualquier uso de tales marcas por parte de Sony Corporation se realiza bajo licencia.
• La marca N es una marca comercial o una marca comercial registrada de NFC Forum,
Inc. en Estados Unidos y en otros países.
• Android y Google Play son marcas comerciales de Google Inc.
• Las demás marcas y nombres comerciales pertenecen a sus respectivos propietarios.
SRS-X55 [EU8] (GB, FR, ES, DE, NL, IT) 4-565-693-21(2)
Deutsch
Mitgelieferte Anleitungen
Einführungsanleitung (dieses Dokument)
Enthält Anweisungen, wie das Gerät mit BLUETOOTH-Geräten zu verbinden ist, und erläutert die Grundfunktionen.
Referenzhandbuch
Enthält Sicherheitshinweise und die technischen Daten des Produkts.
Hilfe
Lesen Sie die Hilfe auf Ihrem Computer oder Smartphone, wenn Sie mehr zur Verwendung des Geräts erfahren möchten. Die Hilfe enthält auch eine Fehlersuchanleitung, in der die Behebung eventuell auftretender Probleme beschrieben wird.
URL: http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Zweidimensionaler Code:
Laden des Geräts
Dieses Gerät ist mit einem eingebauten Lithium-Ionen-Akku ausgestattet.
Laden Sie den Akku auf, bevor Sie das Gerät zum ersten Mal verwenden.
Hinweis
• Bringen Sie zuvor einen für das Land bzw. die Region geeigneten Stecker an das
Netzteil an. Stecken Sie den Stecker unbedingt bis zum Anschlag in das Netzteil, so dass er mit einem Klicken einrastet.
Netzteil
(mitgeliefert)
Leuchtet
(orange)
DC IN
Der Ladevorgang beginnt, wenn das Gerät über das Netzteil an eine
Netzsteckdose angeschlossen wird, und die Anzeige CHARGE leuchtet orange. Das Laden des Akkus dauert ungefähr 4 Stunden und danach erlischt die Anzeige.
Herstellen einer Funkverbindung mit
BLUETOOTH-Geräten
Wählen Sie je nach Situation eine der folgenden drei Verbindungsmethoden aus. Bei
BLUETOOTH-Geräten muss zunächst ein Pairing (eine „Paarbildung“) erfolgen.
Pairing und Herstellen einer Verbindung mit einem BLUETOOTH-Gerät
Bei diesem Gerät ist ein Pairing mit bis zu acht BLUETOOTH-Geräten möglich.
Beim Pairing mit zwei oder mehr BLUETOOTH-Geräten führen Sie das folgende
Pairing-Verfahren für jedes Gerät aus.
1
Schalten Sie dieses Gerät mit der Taste / (Ein/Aus) ein.
Die Anzeige / (Ein/Aus) leuchtet grün.
Leuchtet
(grün)
2
Berühren Sie die Taste (BLUETOOTH) PAIRING.
Die Anzeige (BLUETOOTH) beginnt, weiß zu blinken.
Blinkt
(weiß)
Wenn Sie die BLUETOOTH-Funktion zum ersten Mal verwenden und nur die Taste (BLUETOOTH) PAIRING berühren, beginnt die Anzeige
(BLUETOOTH) schnell weiß zu blinken und das Gerät wechselt automatisch in den Pairing-Modus.
3
Berühren Sie die Taste (BLUETOOTH) PAIRING länger, bis
Signaltöne zu hören sind und die Anzeige (BLUETOOTH) beginnt, schnell weiß zu blinken.
Dieses Gerät wechselt in den Pairing-Modus.
Blinkt schnell
(weiß)
4
Führen Sie den Pairing-Prozess bei dem BLUETOOTH-Gerät durch, so dass es dieses Gerät erkennt.
Wenn eine Liste der erkannten Geräte im Display des BLUETOOTH-Geräts erscheint, wählen Sie „SRS-X55“.
Wenn im Display eines BLUETOOTH-Geräts die Aufforderung zur Eingabe eines Passworts erscheint, geben Sie „ 0000 “ ein.
5
Stellen Sie die BLUETOOTH-Verbindung vom BLUETOOTH-
Gerät aus her.
Sobald die BLUETOOTH-Verbindung hergestellt wurde, leuchtet die
Anzeige (BLUETOOTH) an diesem Gerät stetig.
Herstellung einer Verbindung zu einem
BLUETOOTH-Gerät, mit dem ein Pairing ausgeführt wurde
1
Schalten Sie dieses Gerät ein.
2
Berühren Sie die Taste (BLUETOOTH) PAIRING.
Die Anzeige (BLUETOOTH) beginnt, weiß zu blinken.
3
Stellen Sie die BLUETOOTH-Verbindung vom BLUETOOTH-
Gerät aus her.
Sobald die BLUETOOTH-Verbindung hergestellt wurde, leuchtet die
Anzeige (BLUETOOTH) an diesem Gerät stetig.
Sofortverbindung mit einem Smartphone
(NFC)
Wenn Sie dieses Gerät an ein Smartphone halten, schaltet sich das Gerät automatisch ein, führt das Pairing durch und stellt die BLUETOOTH-Verbindung her.
Kompatible Smartphones
NFC-kompatible Smartphones mit Android ™ 2.3.3 oder höher
NFC
NFC (Near Field Communication) ist eine Technologie zur drahtlosen
Kommunikation über kurze Strecken zwischen verschiedenen Geräten, z. B.
Smartphones und IC-Tags. Dank der NFC-Funktion lässt sich die
Datenkommunikation – beispielsweise das BLUETOOTH-Pairing – einfach durchführen, indem die NFC-kompatiblen Geräte nahe aneinander gehalten werden (und zwar an der N-Markierung bzw. einer festgelegten Stelle an den
Geräten).
1
Schalten Sie die NFC-Funktion am Smartphone ein.
Näheres dazu finden Sie in der mit dem Smartphone gelieferten
Bedienungsanleitung.
• Bei einem Smartphone, auf dem das Betriebssystem Android 2.3.3 oder höher, aber eine frühere Version als Android 4.1 installiert ist: Fahren Sie mit Schritt 2 fort.
• Bei einem Smartphone, auf dem das Betriebssystem Android 4.1 oder höher installiert ist: Fahren Sie mit Schritt 4 fort.
2
Laden Sie die App „NFC-Schnellverbindung“ herunter und installieren Sie sie.
„NFC-Schnellverbindung“ ist eine kostenlose Android-App, die Sie von
Google Play ™ herunterladen können.
Zum Herunterladen der App suchen Sie nach „NFC-Schnellverbindung“ oder greifen Sie über den folgenden zweidimensionalen Code darauf zu.
Beim Herunterladen der App fallen eventuell Gebühren an.
Wenn Sie die App über den zweidimensionalen
Code herunterladen möchten, verwenden Sie eine
App zum Lesen eines zweidimensionalen Codes.
Hinweis
• In manchen Ländern oder Regionen steht diese Anwendung möglicherweise nicht für den Download zur Verfügung.
3
Starten Sie „NFC-Schnellverbindung“ auf dem Smartphone.
Vergewissern Sie sich, dass der Bildschirm der App angezeigt wird.
4
Halten Sie das Smartphone an dieses Gerät.
Heben Sie zuvor die Bildschirmsperre am Smartphone auf.
Halten Sie das Smartphone so lange an die Stelle mit dem N-Logo an diesem Gerät, bis das Smartphone reagiert. Wenn dieses Gerät ausgeschaltet ist, schaltet es sich ein, wenn Sie das Smartphone daran halten.
Smartphone reagiert
(Gerät erkannt)
Nederlands
Geleverde handleidingen
Beknopte gids (dit document)
Biedt instructies over het aansluiten van het toestel op
BLUETOOTH-apparaten en de basisbediening.
Naslaggids
Hierin vindt u voorzorgsmaatregelen en technische gegevens.
Helpgids
Lees de Helpgids op uw computer of smartphone als u meer bijzonderheden wilt over het gebruik van het toestel. De Helpgids bevat ook informatie voor het oplossen van mogelijke problemen.
URL: http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Tweedimensionale code:
Het toestel opladen
Dit toestel heeft een interne lithium-ionbatterij (oplaadbaar). Laad de batterij op voordat u het toestel voor de eerste keer gebruikt.
Opmerking
• Bevestig vooraf een stekker die geschikt is voor uw land/regio aan de netvoedingsadapter. Steek de stekker volledig in de netvoedingsadapter (tot u een klik hoort).
Licht op
(amberkleurig)
Netadapter
(bijgeleverd)
Befolgen Sie zum Herstellen der Verbindung die Anweisungen auf dem
Bildschirm.
Sobald die BLUETOOTH-Verbindung hergestellt wurde, leuchtet die
Anzeige (BLUETOOTH) an diesem Gerät stetig.
Zum Trennen der Verbindung halten Sie das Smartphone erneut an dieses
Gerät.
Tipp
Wenn sich die Verbindung nicht herstellen lässt, versuchen Sie Folgendes.
• Starten Sie die App auf dem Smartphone und bewegen Sie das Smartphone langsam über die Stelle mit dem N-Logo an diesem Gerät.
• Wenn sich das Smartphone in einem Etui befindet, nehmen Sie es heraus.
• Vergewissern Sie sich, dass am Smartphone der Bildschirm der App angezeigt wird.
Musikwiedergabe und Tätigen von Anrufen
Stellen Sie eine BLUETOOTH-Verbindung mit einem BLUETOOTH-Gerät her und bedienen Sie dann dieses Gerät.
Wiedergeben von Musik
Profil: A2DP, AVRCP
Starten Sie die Wiedergabe am BLUETOOTH-Gerät und stellen Sie die
Lautstärke ein.
Stellen Sie die Lautstärke am angeschlossenen Gerät oder mit den Tasten VOL
–/+ an diesem Gerät ein.
DC IN
Het opladen start wanneer het toestel wordt aangesloten op een stopcontact via de netadapter en de CHARGE-indicator amberkleurig oplicht. Het duurt ongeveer vier uur om de batterij op te laden, waarna de indicator dooft.
Draadloos verbinding maken met BLUETOOTHapparaten
Selecteer uw situatie uit de 3 volgende koppelingstypes. BLUETOOTH-apparaten moeten eerst met elkaar gekoppeld worden.
Een BLUETOOTH-apparaat koppelen en verbinden
Het toestel kan worden gekoppeld aan maximaal acht BLUETOOTH-apparaten.
Wanneer twee of meer BLUETOOTH-apparaten worden gekoppeld, dient u de volgende koppelprocedure voor elk apparaat uit te voeren.
1
Druk op de knop / (aan/uit) om dit toestel in te schakelen.
De indicator / (aan/uit) licht groen op.
Licht op
(groen)
2
Raak de knop (BLUETOOTH) PAIRING aan.
De indicator (BLUETOOTH) begint wit te knipperen.
Knippert
(wit)
Tipp
• Informationen zur Wiedergabe bei Anschluss an die Buchse AUDIO IN finden Sie in der Hilfe.
Tätigen/Entgegennehmen eines Anrufs
Profil: HSP, HFP
Mikrofon
Als u de BLUETOOTH-functie voor het eerst gebruikt en wanneer u alleen de knop (BLUETOOTH) PAIRING aanraakt, begint de indicator
(BLUETOOTH) snel wit te knipperen en gaat het toestel automatisch naar de koppelmodus.
3
Houd de knop (BLUETOOTH) PAIRING ingedrukt tot u pieptonen hoort en de indicator (BLUETOOTH) snel wit begint te knipperen.
Het toestel gaat naar de koppelmodus.
Knippert snel
(wit)
Bedienen Sie das Smartphone, um einen Anruf zu tätigen.
Zum Beenden eines Anrufs drücken Sie die Taste an diesem Gerät.
Drücken Sie die Taste an diesem Gerät, wenn ein Anruf eingeht.
Gehen Sie so auch vor, wenn während der Musikwiedergabe ein Anruf eingeht.
• Der BLUETOOTH®-Schriftzug und die BLUETOOTH®-Logos sind Eigentum von
Bluetooth SIG, Inc., und ihre Verwendung durch die Sony Corporation erfolgt in
Lizenz.
• Die N-Markierung ist in den USA und in anderen Ländern ein Markenzeichen oder ein eingetragenes Markenzeichen von NFC Forum, Inc.
• Android und Google Play sind Markenzeichen von Google Inc.
• Andere Markenzeichen und Produktnamen sind Eigentum der jeweiligen
Rechteinhaber.
4
Voer de koppelprocedure uit vanaf het BLUETOOTH-apparaat om dit toestel te detecteren.
Wanneer een lijst met gedetecteerde apparaten op het display van het
BLUETOOTH-apparaat verschijnt, selecteert u "SRS-X55".
Als u een toegangscode moet invoeren op het scherm van het
BLUETOOTH-apparaat, voer dan " 0000 " in.
5
Breng de BLUETOOTH-verbinding tot stand op het
BLUETOOTH-apparaat.
Wanneer de BLUETOOTH-verbinding tot stand is gebracht, blijft de indicator (BLUETOOTH) op het toestel aan.
Verbinding maken met een gekoppeld
BLUETOOTH-apparaat
1
Schakel dit toestel in.
2
Raak de knop (BLUETOOTH) PAIRING aan.
De indicator (BLUETOOTH) begint wit te knipperen.
3
Breng de BLUETOOTH-verbinding tot stand op het
BLUETOOTH-apparaat.
Wanneer de BLUETOOTH-verbinding tot stand is gebracht, blijft de indicator (BLUETOOTH) op het toestel aan.
Tip
• Meer informatie over afspelen door verbinding te maken via de AUDIO IN jack vindt u in de Helpgids.
Bellen/een oproep ontvangen
Profiel: HSP, HFP
Microfoon
Bedien uw smartphone om te bellen.
Om het gesprek te beëindigen, drukt u op de knop op het toestel.
Druk op de knop op het toestel wanneer er een oproep binnenkomt.
Voer dezelfde handeling uit wanneer een oproep binnenkomt terwijl u naar muziek luistert.
• Het woordmerk BLUETOOTH® en de logo's van BLUETOOTH zijn eigendom van
Bluetooth SIG, Inc. en Sony Corporation gebruikt deze items onder licentie.
• De markering N is een handelsmerk of een gedeponeerd handelsmerk van NFC
Forum, Inc. in de Verenigde Staten en andere landen.
• Android en Google Play zijn handelsmerken van Google Inc.
• Andere handelsmerken en handelsnamen zijn eigendom van hun respectieve eigenaren.
Verbinding maken met een smartphone via aanraking (NFC)
Door het toestel aan te raken met een smartphone, wordt het toestel automatisch ingeschakeld en gaat het vervolgens verder met het koppelen en de BLUETOOTH-verbinding.
Compatibele smartphones
Smartphones die uitgerust zijn met de NFC-functie en waarop Android ™ 2.3.3 of later geïnstalleerd is
NFC
NFC (Near Field Communication) is een technologie voor draadloze communicatie binnen een kort bereik tussen verschillende apparaten (bv. smartphones en IC-tags). Met de NFC-functie kunt u gegevenscommunicatie
(bv. koppelen via BLUETOOTH) uitermate eenvoudig instellen door apparaten die NFC ondersteunen elkaar te laten raken (bv. bij de N-markering of een andere plaats die aangegeven is op het apparaat).
1
Zet de NFC-functie op de smartphone aan.
Voor meer informatie raadpleegt u de bedieningsinstructies bij de smartphone.
• Als het besturingssysteem van uw smartphone Android 2.3.3. of later en ouder dan Android 4.1 is: ga verder met stap 2.
• Als het besturingssysteem van uw smartphone Android 4.1 of later is: ga verder met stap 4.
2
Download en installeer de app "NFC eenvoudig verbinden".
"NFC eenvoudig verbinden" is een gratis Android-app die u kunt downloaden van Google Play ™ .
Download de app door naar "NFC eenvoudig verbinden" te zoeken of scan de volgende tweedimensionale code. Om de app te kunnen downloaden, worden er mogelijk verbindingskosten aangerekend.
Om te downloaden met de tweedimensionale code gebruikt u een app voor het lezen van tweedimensionale codes.
Opmerking
• De app is mogelijk niet verkrijgbaar in bepaalde landen en/of regio's.
3
Start "NFC eenvoudig verbinden" op de smartphone.
Ga na of het scherm van de app weergegeven wordt.
4
Raak dit toestel aan met de smartphone.
Ontgrendel het scherm van de smartphone vooraf.
Blijf het gedeelte dat gemarkeerd is met N aanraken op de smartphone tot de smartphone reageert. Als het toestel uitgeschakeld is, schakelt u het in wanneer de smartphone hiermee contact maakt.
Smartphone reageert
(toestel herkend)
Volg de instructies op het scherm om de verbinding tot stand te brengen.
Wanneer de BLUETOOTH-verbinding tot stand is gebracht, blijft de indicator (BLUETOOTH) op het toestel aan.
Om de verbinding te verbreken, raakt u het toestel weer aan met de smartphone.
Tip
Probeer het volgende als het niet goed lukt om de verbinding te maken.
• Activeer de app op de smartphone en beweeg de smartphone langzaam over het gedeelte dat met N gemarkeerd is op het toestel.
• Als uw smartphone opgeborgen is in een hoes, verwijdert u deze.
• Controleer of het scherm van de app wordt weergegeven op de smartphone.
Luisteren en oproepen tot stand brengen
Bedien het toestel nadat u via BLUETOOTH verbinding hebt gemaakt met uw
BLUETOOTH-apparaat.
Muziek beluisteren
Profiel: A2DP, AVRCP
Start de weergave op het BLUETOOTH-apparaat en pas het volume aan.
Stel het volume in op het aangesloten apparaat of met de knoppen VOL –/+ op het toestel.
Italiano
Manuali forniti in dotazione
Guida di avvio (il presente documento)
Contiene istruzioni su come connettere l’apparecchio con dispositivi
BLUETOOTH, nonché informazioni sulle operazioni di base.
Guida di riferimento
Contiene le precauzioni e le caratteristiche tecniche relative al prodotto.
Guida
Leggere la Guida sul computer o sullo smartphone per ottenere informazioni più dettagliate sull’uso dell’apparecchio. La Guida include anche una sezione dedicata alla risoluzione dei problemi, con misure correttive per gli eventuali problemi che si potrebbero verificare.
URL: http://rd1.sony.net/help/speaker/srs-x55/h_zz/
Codice bidimensionale:
Carica dell’apparecchio
Il presente apparecchio è dotato di una batteria ricaricabile a ioni di litio incorporata. Caricare la batteria prima di utilizzare l’apparecchio per la prima volta.
Nota
• Per prima cosa, collegare all’adattatore CA una spina adatta al proprio paese/alla propria regione. Assicurarsi di inserire completamente la spina nell’adattatore CA fino ad udire uno scatto.
Illuminato
(arancione)
2
Toccare il pulsante (BLUETOOTH) PAIRING.
L’indicatore (BLUETOOTH) inizia a lampeggiare in bianco.
Lampeggia
(bianco)
Alimentatore CA
(in dotazione)
DC IN
La carica inizia quando l’apparecchio viene collegato a una presa elettrica
CA attraverso l’alimentatore CA, e l’indicatore CHARGE (arancione) si illumina. La carica viene completata in circa quattro ore, quindi l’indicatore si spegne.
Come effettuare la connessione wireless con i dispositivi BLUETOOTH
Selezionare la propria situazione tra i 3 tipi di associazione indicati sotto. I dispositivi
BLUETOOTH devono prima essere “associati” tra di loro.
Associazione e connessione con un dispositivo BLUETOOTH
L’apparecchio può essere associato con max. 8 dispositivi BLUETOOTH. In caso di associazione con due o più dispositivi BLUETOOTH, eseguire la seguente procedura di associazione per ogni dispositivo.
1
Premere il pulsante / (accensione) per accendere l’apparecchio.
L’indicatore / (accensione) si illumina in verde.
Illuminato
(verde)
Quando si usa la funzione BLUETOOTH per la prima volta e si tocca soltanto il pulsante (BLUETOOTH) PAIRING, l’indicatore (BLUETOOTH) inizia a lampeggiare rapidamente in bianco e l’apparecchio passa automaticamente alla modalità di associazione.
3
Toccare e tenere premuto il pulsante (BLUETOOTH)
PAIRING fino a quando non si sente un bip e l’indicatore
(BLUETOOTH) inizia a lampeggiare rapidamente in bianco.
L’apparecchio passa alla modalità di associazione.
Lampeggia rapidamente (bianco)
4
Eseguire la procedura di associazione sul dispositivo
BLUETOOTH per rilevare l’apparecchio.
Quando sul display del dispositivo BLUETOOTH viene visualizzato l’elenco dei dispositivi rilevati, selezionare “SRS-X55”.
Qualora venga richiesta l’immissione della passkey sul display di un dispositivo BLUETOOTH, immettere “ 0000 ”.
5
Effettuare la connessione BLUETOOTH dal dispositivo
BLUETOOTH.
Quando l’apparecchio è connesso con il dispositivo BLUETOOTH, l’indicatore (BLUETOOTH) resta acceso.
Connessione con un dispositivo BLUETOOTH associato
1
Accendere l’apparecchio.
2
Toccare il pulsante (BLUETOOTH) PAIRING.
L’indicatore (BLUETOOTH) inizia a lampeggiare in bianco.
3
Effettuare la connessione BLUETOOTH dal dispositivo
BLUETOOTH.
Quando l’apparecchio è connesso con il dispositivo BLUETOOTH, l’indicatore (BLUETOOTH) resta acceso.
Connessione One touch con uno smartphone (NFC)
Toccando l’apparecchio con uno smartphone, l’apparecchio si accende automaticamente, quindi procede con l’esecuzione dell’associazione e della connessione BLUETOOTH.
Smartphone compatibili
Smartphone compatibili con la tecnologia NFC con Android ™ 2.3.3 o versione successiva
NFC
NFC (Near Field Communication) è una tecnologia che consente la comunicazione senza fili a corto raggio tra svariati dispositivi, ad esempio smartphone e “tag” con circuiti integrati. Grazie alla funzione NFC, la comunicazione di dati - ad esempio l’associazione BLUETOOTH - risulta possibile semplicemente facendo toccare i dispositivi compatibili con la tecnologia NFC (vale a dire in corrispondenza del simbolo N o del punto appositamente predisposto su ciascun dispositivo).
1
Attivare la funzione NFC dello smartphone.
Per i dettagli, consultare le istruzioni per l’uso in dotazione con lo smartphone.
• Se il sistema operativo dello smartphone utilizzato è Android 2.3.3 o una versione successiva e inferiore ad Android 4.1: passare al punto 2.
• Se il sistema operativo dello smartphone è Android 4.1 o una versione successiva, passare al punto 4.
2
Scaricare e installare l’applicazione “Connessione facile NFC”.
“Connessione facile NFC” è un’applicazione Android gratuita che può essere scaricata da Google Play ™ .
Scaricare l’applicazione cercando “Connessione facile NFC” oppure accedere all’applicazione utilizzando il codice bidimensionale seguente.
Per lo scaricamento dell’applicazione potrebbero venire applicati dei costi.
Mediante il codice bidimensionale: utilizzare un’applicazione per la lettura dei codici bidimensionali.
Nota
• Questa applicazione potrebbe non essere disponibile per lo scaricamento in alcune nazioni o aree geografiche.
3
Avviare l’applicazione “Connessione facile NFC” sullo smartphone.
Assicurarsi che la schermata dell’applicazione venga visualizzata.
4
Toccare il presente apparecchio con lo smartphone.
Sbloccare anticipatamente lo schermo dello smartphone.
Continuare a toccare l’apparecchio con lo smartphone sulla parte contrassegnata dal simbolo N fino a quando lo smartphone non reagisce.
Se l’apparecchio è spento, si accenderà non appena verrà toccato con lo smartphone.
Lo smartphone risponde
(apparecchio riconosciuto)
Completare la connessione attenendosi alle istruzioni sullo schermo.
Quando l’apparecchio è connesso con il dispositivo BLUETOOTH, l’indicatore (BLUETOOTH) resta acceso.
Per disconnettere l’apparecchio, toccarlo di nuovo con lo smartphone.
Suggerimento
Qualora non si riesca a connettere l’apparecchio, provare con la procedura seguente.
• Avviare l’applicazione sullo smartphone, quindi muovere lentamente lo smartphone al di sopra del simbolo N dell’apparecchio.
• Qualora lo smartphone sia inserito in una custodia, rimuoverlo da quest’ultima.
• Assicurarsi che la schermata dell’applicazione venga visualizzata sullo smartphone.
Ascolto e chiamata
Utilizzare l’apparecchio dopo aver effettuato la connessione BLUETOOTH con il dispositivo BLUETOOTH utilizzato.
Ascolto di musica
Profilo: A2DP, AVRCP
Avviare la riproduzione sul dispositivo BLUETOOTH, quindi regolare il volume.
Impostare il volume sul dispositivo collegato o con il pulsanti VOL –/+ sull’apparecchio.
Suggerimento
• Per informazioni dettagliate sulla riproduzione tramite presa AUDIO IN, consultare la
Guida.
Effettuazione di una chiamata/Ricezione di una chiamata
Profilo: HSP, HFP
Microfono
Utilizzare il proprio smartphone per effettuare una chiamata.
Per terminare una chiamata, premere il pulsante sull’apparecchio.
Quando si riceve una chiamata, premere il pulsante sull’apparecchio.
Eseguire la stessa operazione quando si riceve una chiamata mentre si sta ascoltando della musica.
• BLUETOOTH® e i relativi loghi sono di proprietà di Bluetooth SIG, Inc. L’uso di tali marchi è concesso in licenza a Sony Corporation.
• Il simbolo N è un marchio o marchio registrato di NFC Forum, Inc. negli Stati Uniti e in altri paesi.
• Android e Google Play sono marchi di Google Inc.
• Gli altri marchi di fabbrica e nomi commerciali appartengono ai rispettivi proprietari.
SRS-X55 [EU8] (GB, FR, ES, DE, NL, IT) 4-565-693-21(2)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 2.1 portable speaker system Rectangle 30 W Black
- 60 - 20000 Hz
- Wired & Wireless Bluetooth 3.5 mm connector
- Built-in microphone
- Built-in Lithium-Ion (Li-Ion) 10 h