Samsung | DVD-P650K | Samsung DVD-P650K User Manual

00xxxx-P650K-XST-Cover
5/26/05
10:17 PM
Page 2
%Ù}j vn dkiB(h'ko
DVD Player
DVD-P650K
ELECTRONICS
AK68-00xxxx
THA ENG
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 2
Precautions
5. Environmental info
1. Setting up
- Refer to the identification label located on the rear of your
player for its proper operating voltage.
- Install your player in a cabinet with adequate ventilation
holes. (7~10cm) Do not block ventilation holes on any of the
components for air circulation.
- Do not push the disc tray in by hand.
- Do not stack components.
- Be sure to turn all components off before moving the player.
- Before connecting other components to this player, be sure
to turn them off.
- Be sure to remove the disc and turn off the player after use,
especially if you don’t use it for a long time.
EZ VIEW
STANDBY/ON
PLAY
EZ VIEW
STANDBY/ON
LOADING
PLAY
EZ VIEW
STANDBY/ON
- The battery used in this product contains chemicals that
are harmful to the environment.
- So, dispose of batteries in the proper manner, according to
federal, state, and local regulations.
The product unit accompanying this user manual is licensed under certain intellectual property
rights of certain third parties. This license is limited to private non-commercial use by end-user
consumers for licensed contents. No rights are granted for commercial use. The license does not
cover any product unit other than this product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/OUR 11172-3 or ISO/OUR 13818-3 used or
sold in combination with this product unit. The license only covers the use of this product unit to
encode and/or decode audio files conforming to the ISO/OUR 11172-3 or ISO/OUR 13818-3. No
rights are granted under this license for product features or functions that do not conform to the
ISO/OUR 11172-3 or ISO/OUR 13818-3.
LOADING
PLAY
LOADING
2. For your safety
- This product utilizes a laser. Use of controls or adjustments
or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
- Do not open covers and do not repair yourself.
Refer servicing to qualified personal.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3. Caution
- Your player is not intended for industrial use but for domestic
purposes. Use of this product is for personal use only.
- Do not put any container filled with liquid or any small metal
objects on the player.
- Exterior influences such as lightning and static electricity can
affect normal operation of this player. If this occurs, turn the
player off and on again with the POWER button, or
disconnect and then reconnect the AC power cord to the AC
power outlet. The player will operate normally.
- When condensation forms inside the player due to sharp
changes in temperature, the player may not operate
correctly. If this occurs, leave the player at room temperature
until the inside of the player becomes dry and operational.
STANDBY/ON
EZ VIEW
PLAY
LOADING
4. Disc
- Do not clean record-cleaning sprays, benzene, thinner, or
other volatile solvents that may cause damage to the disc
surface.
- Do not touch the disc’s signal surface. Hold by the edges or
by one edge and the hole in the center.
- Wipe the dirt away gently; never wipe a cloth back and forth
over the disc.
ENG-2
ENG-3
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 4
TA B L E
OF
CONTENTS
Before you start
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Accessories
Chapter 1: Setup
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2: Connections
Remote
Control
User’s Manual
Batteries for
Remote Control
(AAA Size)
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
Video/Audio
Cable
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3: Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
DVD AUDIO Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Super Audio CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Clips Menu for MP3/WMA/JPEG/MPEG4 . . . . . . . . . . . . . . . . . . . . . . . 44
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
MP3/WMA Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
Chapter 5: Karaoke Functions
3
Karaoke Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Reserving a Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Vocal Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Replace the battery
cover.
Chapter 6: Changing Setup Menu
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell).
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
ENG-4
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting up EZ-Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Chapter 7: Reference
Controlling a TV with the Remote Control . . . . . . . . . . . . . . . . . . . . . . . 71
Firmware upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
ENG-5
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 6
SETUP
Chapter 1
Setup
SETUP
Disc Type and Characteristics
General Features
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
Program Play (CD)
You can program tracks to play in desired order.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
Super Audio CD
Super Audio CD is a high quality audio format with
higher sampling rates and fuller, richer sound as
compared to regular CD.
MPEG4
This unit can play MPEG4 formats within an avi file.
Note
- Discs which cannot be played with this
player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• CVD
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
This DVD player is capable of playing the following types of discs with the corresponding logos:
Disc Types (Logos)
Recording Types
DVD-VIDEO
Audio
+
Video
VIDEO-CD
Audio
+
Video
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
12 Cm
Single-sided 240 min.
Double-sided 480 min.
8 Cm
Single-sided 80 min.
Double-sided 160 min.
12 Cm
74 min.
DVD-AUDIO
12 Cm
74 min.
8 Cm
20 min.
Audio
+
Video
12 Cm
400 min.
- DVD AUDIO is a format specifically
designed to provide the highest
possible audio fidelity capable on
DVD.
Audio
12 Cm
74 min.
- Super Audio CD is a high quality audio
format with higher sampling rates and
fuller, richer sound as compared to
regular CD.
Disc Markings
Play Region Number
PAL broadcast system in U.K, France, Germany, etc.
DVD AUDIO
DVD AUDIO is a format specifically designed to
provide the highest possible audio fidelity capable on
DVD.
ENG-6
Dolby Digital disc
STEREO
DIGITAL
SOUND
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Region Number
(525p/625p)
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p
DVD PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER.”
- DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the
on-screen menu.
20 min.
Super Audio CD
PAL
Characteristics
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
Audio
~
PROGRESSIVE SCAN OUTPUTS
Max. Playing Time
8 Cm
AUDIO-CD
COPY PROTECTION
Disc Size
Stereo disc
Digital Audio disc
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
The Region Number for this player
is described on the rear panel of the
player.
DTS disc
MP3 disc
DivX Certification
DVD AUDIO disc
DivX, DivX Certified, and
associated logos are
trademarks of DivXNetworks,
Inc and are used under
license.
Super Audio CD disc
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow playback
and may cause damage to the DVD player.
ENG-7
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 8
SETUP
SETUP
Setup
Rear Panel
Description
Front Panel Controls
2
6
8 11 12
EZ VIEW
MIC1
MIC2
VOLUME
MIN
1
2
3
4
5
DIGITAL ECHO
MAX MIN
6
MAX
7
9
10
1
1.
STANDBY/ON (
)
When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
2.
DISC TRAY
Place the disc here.
3.
OPEN/CLOSE (
)
Press to open and close the disc tray.
4.
7.
8.
9.
DISPLAY
Operation indicators are displayed here.
5.
MIC1/MIC2
Connect Microphone for karaoke functions.
6.
MICROPHONE VOLUME
Use to adjust microphone volume level.
Turn it to the left or right to control the volume.
2
3
DIGITAL ECHO
Control digital echo volume.
1.
EZ VIEW
The aspect ratio of a picture can easily be adjusted to
your TV's screen size (16:9 or 4:3).
5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jacks.
2.
DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
STOP (
)
Stops disc play.
10. SKIP (
) / SEARCH
Use to forward skip a scene or music.
3.
AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
4.
VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
Component(I-SCAN) or COMPOSITE/S-VIDEO.
11. SKIP (
) / SEARCH
Use to reverse skip a scene or music.
12. PLAY/PAUSE (
)
Begin or pause disc play.
4
5
5.
S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
6.
COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y video.
- If Component(P-SCAN) Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Component(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
Note
Front Panel Display
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- If Component(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- See pages 65 ~ 67 to get more information on how to use the setup menu.
1
1.
Disc type indicators
2.
Play / Pause
2
3
3.
ENG-8
Displays various messages
concerning operations such as PLAY,
STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-9
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 10
SETUP
Chapter 2
CONNECTIONS
Tour of the Remote Control
6.
17
1
7.
2
10.
3
18
19
20
21
4
5
6
22
11.
12.
13.
14.
7
8
9
23
10
24
11
25
15.
16.
17.
26
18.
19.
20.
21.
12
13
14
15
16
27
28
29
30
31
22.
23.
24.
25.
32
33
26.
27.
28.
29.
1.
2.
3.
4.
5.
DVD POWER Button
Turns the power on or off.
NUMBER Buttons
PROG Button
Allows you to program a specific order.
STEP Button
Advances play one frame at a time.
VOL (+, -) Buttons
Control volume.
30.
31.
32.
33.
ENG-10
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
RED
WHITE
YELLOW
Audio Cable
Video Cable
RED
WHITE
YELLOW
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 17)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (COMPOSITE/S-VIDEO ➝ Component
(I-SCAN) ➝ Component(P-SCAN))
ENG-11
Connections
8.
9.
TV/VIDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
SEARCH Buttons (
/
)
Allow you to search forward/backward through a disc.
STOP Button ( )
SKIP Buttons (
/
)
Use to skip the title, chapter or track.
MENU Button
Brings up the DVD player’s menu.
RETURN Button
Returns to a previous menu.
AUDIO Button
Use this button to access various audio functions on a disc.
ZOOM Button
Enlarges DVD picture.
VIDEO SEL. Button
Selects Video output format.
BOOKMARK Button
KARAOKE Button
Use to begin karaoke functions.
TV POWER Button
Turns the TV’s power on or off.
CLEAR Button
Use to remove menus or status displays from the screen.
INSTANT SKIP Button
This function skips playback ahead 10 seconds.
INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
CH (
,
) Buttons
Channel selection.
OPEN/CLOSE (
) Button
To open and close the disc tray.
PLAY/PAUSE Button (
)
Begin/Pause disc play.
INFO Button
Displays the current disc mode.
DISC MENU Button
Brings up the Disc menu.
"❷➛❿ Buttons
ENTER/"
This button functions as a toggle switch.
ANGLE Button
Use to access various camera angles on a DVD.
EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
SACD/CD Button
Selects Super Audio CD or CD playback mode.
SUBTITLE Button
REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
SHUTTLE DIAL (Search mode)
Performs fast motion play.
JOG DIAL (Step mode)
Operates frame by frame play. In CD mode,
performs track search.
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 12
CONNECTIONS
CONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using an S-Video cable.
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
3
RED
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
GREEN
WHITE
Audio Cable
Press the input selector on your TV remote control until the SVideo signal from the DVD player appears on your TV screen.
BLUE
RED
S-Video Cable
(not included)
WHITE
3
RED
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Audio Cable
RED
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display
Setup menu. (See pages 65 to 67)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
WHITE
WHITE
RED BLUE
GREEN
Component cable
(not included)
4
Set the Video Output to Component (I-SCAN) in the Display
Setup menu. (See pages 65 to 67)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 17)
Note
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected,
the screen will turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 17)
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-12
ENG-13
Connections
Connection to a TV (S-Video)
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 14
CONNECTIONS
CONNECTIONS
Connection to a TV (Progressive)
Connection to an Audio System (2 Channel Amplifier)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of the Amplifier.
2
Connections
1
2
RED
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
RED
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
BLUE
GREEN
Using the video signal cable(s), connect the VIDEO, S-VIDEO
or COMPONENT terminals on the rear of the DVD player to the
VIDEO, S-VIDEO or COMPONENT terminal of your TV as
described on pages 11 to 14.
3
WHITE
RED
Turn on the DVD player, TV, and Amplifier.
WHITE
Audio Cable
Audio Cable
RED
Component cable
(not included)
RED
WHITE
RED
BLUE
WHITE
GREEN
2-channel amplifier
4
4
Set the Video Output to Component (P-SCAN) in the Display
Setup menu. (See pages 65 to 67)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings
in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-14
ENG-15
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 16
CONNECTIONS
CONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
Connection to a 5.1CH Analog Amplifier
1
If using an optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
If using audio cables for 5.1 CH Analog Amplifier (not included)
connect the 5.1CH ANALOG AUDIO OUT terminals on the rear
of the DVD player to the 5.1CH ANALOG AUDIO IN terminals
of the 5.1CH Analog Amplifier.
2
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO
or COMPONENT terminals on the rear of the DVD player to the
VIDEO, S-VIDEO or COMPONENT terminals of your TV as
described on pages 11 to 14.
Using the video signal cable(s), connect the VIDEO, S-VIDEO
or COMPONENT terminals on the rear of the DVD player to the
VIDEO, S-VIDEO or COMPONENT terminals of your TV as
described on pages 11 to 14.
OR
3
Coaxial Cable
(not included)
Optical Cable
(not included)
Turn on the DVD player, TV, and Amplifier.
Connections
1
GREEN
WHITE
GREEN
WHITE
BLACK
BLACK
3
Turn on the DVD player, TV, and Amplifier.
5.1ch Analog
Amplifier
4
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
- DVD-AUDIO only plays back two channel audio through the Digital Audio out.
Multi-channel DVD-Audio discs are output through the Analog outputs.
- SACD plays back only through the Analog outputs. (See pages 61 to 62)
ENG-16
ENG-17
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 18
BASIC FUNCTIONS
Chapter 3
BASIC FUNCTIONS
4
Press the "/❷ buttons to
select the PCM Down
Sampling On or Off, then
press the ENTER button.
(See page 62)
Playing a Disc
Before Play
EZ SETUP
PCM Down Sampling
Off
On
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
5
If an AV Receiver is
connected to the TV,
press the "/❷ buttons to
select Connected, then
press the ENTER button.
Press the "/❷/➛/❿
buttons to select desired
item, then press the
ENTER button to set the
speaker. (See page 64)
Connected
Not Connected
EZ SETUP
C
L
Small
Small
LFE
R
On
Small
Small
Small
END
User
SR
SL
Setting up EZ-Setup
After the menu language setting is finished, the EZ Setup menu appears.
You can setup PLAYER MENU LANGUAGE, TV Aspect, and PCM Down Sampling to suit your
preference.
1
To begin EZ Setup, press
the "/❷ buttons to select
Yes, then press the
ENTER button.
2
Press the "/❷ buttons to
select the desired player
menu language, then
press the ENTER button.
3
EZ Setup start?
When finished setting the
speaker, press the
"/❷/➛/❿ buttons to
select END, then press
the ENTER button.
You can also use the
RETURN button to exit.
Yes
No
***Current Settings***
Player Menu Language
: English
TV Aspect
: 4:3 L-Box
PCM Down Sampling
: On
EZ SETUP
Player Menu Language
5-1
If an AV Receiver is not
connected to the TV,
press the "/❷ buttons to
select Not connected,
then press the ENTER
button.
EZ SETUP
AV Receiver Connected?
Connected
Not Connected
English
EZ SETUP
Français
Deutsch
Español
Thai
Press the ENTER to
finish.
Settings complete
Press ENTER to exit
EZ SETUP
TV Aspect
▼
Press the "/❷ buttons to
select the desired TV
Aspect, then press the
ENTER button.
(See page 66)
EZ SETUP
Basic
Functions
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up: If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time.) If the
language for the startup screen is not set, the settings may change whenever you turn
the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the
button on the
front panel of the unit for more than 5 seconds with no disc in the unit.
Then the SELECT MENU LANGUAGE window appears again where you can reset
your preferred language.
EZ SETUP
AV Receiver Connected?
4:3 Letter Box
6
4:3 Pan & Scan
16:9 Wide
Press the MENU button to
exit.
ENG-18
ENG-19
If you want to run EZ Setup again, select
“EZ Setup” in the Setup menu. (See pages 55)
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 20
BASIC FUNCTIONS
BASIC FUNCTIONS
▼
Playback
6
1
Pausing Play
Press the PLAY/PAUSE
( ) or STEP button on the
remote control during play.
Press the OPEN/CLOSE
( ) button.
The STANDBY indicator
light goes out and the tray
opens.
If the player is left for about 5 minutes in pause
mode, it will stop.
Each time the button is pressed or Jog Dial is
turned, a new frame will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
You can only perform step motion play in the
forward direction.
▼
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
Reverse slow motion play will not work.
Step Motion Play (Except
CD)
Turn the JOG DIAL clockwise
or press the STEP button on
the remote control during play.
Place a disc gently into the
tray with the disc’s label
facing up.
▼
3
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( ) button again, it will pick up
where you left off. (unless the disc is removed
or the player is unplugged, or if you press the
STOP ( ) button twice.)
Press the PLAY/PAUSE ( )
button or OPEN/CLOSE ( )
button to close the disc tray.
Note
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( ) button to resume normal play.
8
Slow Motion Play (Except
CD)
Press the SEARCH ( )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
Note
This (
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
( ) button.
ENG-20
ENG-21
) icon indicates an invalid button press.
Basic
Functions
▼
2
Stopping Play
Press the STOP ( ) button
during play.
) button
Note
7
4
Screen stops, no sound.
To resume, press the PLAY/PAUSE (
once again.
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 22
BASIC FUNCTIONS
BASIC FUNCTIONS
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
When Playing a DVD/VCD/CD/MPEG4
You can select Info in the function menu by
pressing the MENU button.
▼
Using the Display Function
▼
Using the Search and Skip Functions
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
1
Searching through a Chapter or Track
▼
During play, press the SEARCH ( or ) button
and press again to search at a faster speed.
DVD
2X, 8X, 32X, 128X
VCD
4X, 8X
CD/SACD/DVD-AUDIO
2X, 4X, 8X
2
Basic
Functions
During play, turn the
SHUTTLE DIAL or press
the SEARCH ( or
)
button on the remote
control for more than 1
second.
During play, press the
INFO button on the remote
control.
DVD
Press the "/❷ buttons to
select the desired item.
01
02
0:00:13
Note
ENG 5.1CH
Off
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
VCD
01
0:00:43
Skipping Tracks
During play, press the SKIP
(
or
) button.
CD
01
0:00:48
- When playing a DVD, if you press the SKIP ( )
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP ( )
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
VCD and you press the
button, it moves
forward 5 minutes. If you press the
button,
it moves backward 5 minutes.
MPEG4
01
0:00:13
AC3 1/1
None
640x272
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-22
ENG-23
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 24
BASIC FUNCTIONS
BASIC FUNCTIONS
▼
3
Press the ➛/❿ buttons to
make the desired setup and
then press the ENTER
button.
You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
Using the Disc and Title Menu
Using the Disc Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
4
2
Press the "/❷ buttons to
select Disc Menu, then
press the ❿ or ENTER
button.
Press ENTER key
for Disc Menu
Note
- Depending on a disc, the Disc Menu may not
work.
- You can also use the Disc Menu, using the DISC
MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language.
In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
The MP3, AC3 and WMA are supported. (DivX)
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
(DivX)
File Size has a relationship with resolution of a title.
The larger file size is, the higher resolution is displayed.
If the file resolution is small, it scales up automatically. So you can see the larger screen.
ENG-24
Using the Title Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press the "/❷ buttons to
select Title Menu, then
press the ❿ or ENTER
button.
Press ENTER key
for Title Menu
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-25
Basic
Functions
To make the screen
disappear, press the INFO
button again.
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 26
BASIC FUNCTIONS
BASIC FUNCTIONS
Using the Function Menu
Repeat Play
Using the Function Menu (DVD/VCD)
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
1
When playing a DVD/VCD/CD
Press the MENU button
during playback.
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
Press the "/❷ buttons to
select one of the six
functions. Then press the
❿ or ENTER button to
access the function.
Zoom
2
Bookmark
Repeat
DVD
Press the ➛/❿ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
EZ View
Front Display : Bright
Off
01
T
01 A-B
REPEAT
ENTER
01 A-B
REPEAT
ENTER
VCD/CD
Off
▼
3
Info
▼
Press the "/❷ buttons to
select Function, then press
the ❿ or ENTER button.
- Info (See pages 23 to 24)
- Zoom (See page 37)
- Bookmark
(See pages 35 to 36)
- Repeat (See pages 27 to 28)
- EZ View
(See pages 30 to 31)
- Front Display
Lights when the front display
is selected Bright.
You can also directly select these functions
using their respective buttons on the remote
control.
Note
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
01
D
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the ➛/❿ buttons to Select A-B.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
3
To return to normal play,
press REPEAT button
again, then press the ➛/❿
buttons to select Off and
press ENTER button.
DVD
Off
01
T
01 A-B
REPEAT
ENTER
01 A-B
REPEAT
ENTER
VCD/CD
Off
ENG-26
T
DVD repeats play by chapter or title, CD and
VCD repeat play by disc or track.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
T
01
D
Note
- Depending on a disc, the Repeat function may
not work.
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-27
Basic
Functions
2
00xxxx-P650K-XST-1 eng
6/2/05
08:00pm
Page 28
BASIC FUNCTIONS
BASIC FUNCTIONS
Slow Repeat Play
Program Play & Random Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
Program Play (CD)
When playing a DVD/VCD
Program Play allows you to select the order in which you want tracks to play.
1
During play, press the
PROG button.
1
During play, press the
PLAY/PAUSE ( ) button.
Press the ➛/❿ buttons to
select PROGRAM.
Press the ENTER button.
2
Press the SEARCH ( )
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
PROGRAM
➛!❿❿
Basic
Functions
2
RANDOM
▼
3
▼
3
The disc will play from A to B repeatedly at the
speed you chose.
Press the REPEAT button
on the remote control.
Press the ➛/❿ buttons to
select A-B.
Press the "/❷/➛/❿
buttons to select the first
track to add to the program.
Press the ENTER button.
The selection numbers
appear in the Program
Order box.
PROGRAM 01
Track
01
05
09
13
02
06
10
14
03
07
11
15
Program Order
04
08
12
16
------
------
------
------
- To return to the previous menu screen, press
the RETURN button.
- To cancel the selected program order, press
the CLEAR button.
- This unit can support a maximum of 20
programmed tracks.
4
▼
4
Press the ENTER button at
the point where you want
repeat play to start (A).
B is automatically
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
To set A-B REPEAT, set (A) first, then set (B)
after the following slow play time has elapsed:
1/8x: wait 40 seconds, then press B
1/4x: wait 20 seconds, then press B
1/2x: wait 10 seconds, then press B
Random Play (CD)
Random Play plays a disc's tracks in random order.
5
To return to normal play,
press the CLEAR button and
then press the PLAY/PAUSE
( ) button.
Press the PLAY/PAUSE
( ) button.
The disc will be played in
programmed order.
1
Note
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-28
Press the PROG button.
2
Press the ➛/❿ buttons to
select RANDOM.
Press the ENTER button.
PROGRAM
➛!❿❿
RANDOM
Note
- Depending on a disc, the Program and Random
Play functions may not work.
- While in playback mode, press the CLEAR button
on the remote control to cancel Program Play or
Random Play.
ENG-29
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 30
A D VA N C E D F U N C T I O N S
Chapter 4
A D VA N C E D F U N C T I O N S
If you are using a 4:3 TV
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
For 4:3 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
- Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
- 4:3 Pan&Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
▼
4:3 Letter Box
EZ VIEW
To make the aspect ratio bar disappear,
press the CLEAR button.
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears.
The picture will look vertically stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
This function may behave differently depending on the type of disc.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- WIDE SCREEN
Displays the content of the DVD title in 16:9 aspect ratio.
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will
look vertically stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
ENG-30
ENG-31
Advanced
Functions
Press the EZ VIEW
button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display
Setup menu.
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup menu.
(See pages 65 to 67).
For 16:9 aspect ratio discs
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 32
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Selecting the Audio Language
Selecting the Subtitle Language
You can select a desired audio language quickly and easily with the AUDIO button.
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the AUDIO button (DVD/VCD/CD/MPEG4)
Using the SUBTITLE button (DVD/MPEG4)
1
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
DVD
Off
SUBTITLE
VCD/CD
MPEG4
Stereo
Press the ➛/❿ buttons to
select the desired subtitle
language on a MPEG4 then
press the ENTER button.
AUDIO
Advanced
Functions
When playing a VCD or CD,
you can select among
Stereo, Right or Left.
AUDIO
NONE
MPEG4
Press the ➛/❿ buttons to
select the desired Audio on
a MPEG4 then press the
ENTER button.
PCM 1/2
2
To remove the SUBTITLE
icon, press the CLEAR or
RETURN button.
2
Note
- Depending on DVDs, you can change the
desired subtitle in the Disc Menu. Press the
DISC MENU button.
To remove the AUDIO
icon, press the CLEAR or
RETURN button.
- This function depends on what subtitles are
encoded on the disc and may not work on all
DVDs.
Note
- This function depends on audio languages are
encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio
languages.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
60.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 59.
ENG-32
ENG-33
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 34
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Changing the Camera Angle
Using the Bookmark Function
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
Using the ANGLE button (DVD)
Using the Bookmark Function (DVD/VCD)
If the disc contains multiple angles, the ANGLE appears on the screen.
1
1
During play, press the
BOOKMARK button on the
remote control.
Press the ANGLE button,
then the ANGLE icon will
appear with the current
angle number and the
number of angles
available.
2
Using the MENU button
During play, press the MENU
button on the remote control.
4/6
Press the $/❷ buttons to
select Function, then
press the ❿ or ENTER
button.
ANGLE
Press the ANGLE button
repeatedly to select the
desired angle. To remove
the ANGLE icon, press the
CLEAR or RETURN
button.
Info
Zoom
Bookmark
Repeat
EZ View
Note
If the disc has only one angle, this feature won’t
work. Currently, very few discs have this
feature.
Using the Instant Replay/Skip Function
Press the $/❷ buttons to
select Bookmark, then
press the ❿ or ENTER
button.
Advanced
Functions
Front Display : Bright
Info
Zoom
Bookmark
Repeat
EZ View
Front Display : Bright
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Press the INSTANT
REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
2
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP
button.
- Playback will skip ahead
10 seconds.
Note
- When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
- Depending on a disc, the Bookmark function may
not work.
Note
Depending on the disc, these functions may not
work.
ENG-34
ENG-35
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 36
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Recalling a Marked Scene
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play, press the
BOOKMARK button on
the remote control.
1
During play, press the ZOOM
button on the remote control.
Using the MENU button.
During play or pause mode,
press the MENU button on
the remote control.
2
Press the ➛/❿ buttons to
select a marked scene.
Press the $/❷ buttons to
select Function, then
press the ❿ or ENTER
button.
Info
Zoom
Bookmark
Repeat
EZ View
Front Display : Bright
3
Press the $/❷ buttons to
select Zoom, then press
the ❿ or ENTER button.
Advanced
Functions
Press the PLAY/PAUSE
(
) button to skip to
the marked scene.
Info
Zoom
Bookmark
Repeat
EZ View
Front Display : Bright
Clearing a Bookmark
▼
1
2
During play, press the
BOOKMARK button on
the remote control.
Press the $/❷ or ➛/❿
buttons to select the part
of the screen you want to
zoom in on.
Press the ENTER button.
2
During VCD play, press ENTER to zoom in
2X/Normal in order.
Note
When VCD2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU buton.
Press the ➛/❿ buttons to
select the bookmark
number you want to delete.
3
Press the CLEAR button
to delete a bookmark
number.
ENG-36
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
ENG-37
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 38
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Note
DVD AUDIO Playback
Most DVD AUDIO discs are recorded in Groups you can change Groups with this Function.
Bonus Group playback.
Some DVD AUDIO discs have Bonus groups. If you want to play a Bonus group, you must enter the
Bonus Group code. The code is usually on the DVD AUDIO disc case.
1
Open the disc tray.
Place the DVD AUDIO disc on the tray.
- Place the DVD AUDIO disc with the labeled side up.
Close the tray.
- The tray closes and disc plays.
To access the desired Track when there is more than one on the DVD AUDIO disc.
If pages are included with the DVD-AUDIO disc, you can see this icon.
To access the desired page, press the INFO button, then press the ➨/➛!button.
If a slide show is included with the DVD-AUDIO disc, you can see this icon.
▼
2
You can select Info in the function menu by
pressing the MENU button.
During play, press the INFO
button on the remote
control.
Press the $/❷ buttons to
select the desired item.
If a video zone is included with the DVD-AUDIO disc, you can see this icon.
V-zone
Allows playback of music from a desired time by using the number buttons.
Advanced
Functions
3
Slide
DVD-AUDIO
01
01
01
0:00:13
▼
You may use the number buttons of the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
▼
Some DVD-AUDIO discs don’t down-mix audio.
These discs always output 5.1ch analog audio
regardless of audio setup.
4
Press the ➛/❿ buttons to
make the desired setup and
then press the ENTER
button.
5
To make the screen
disappear, press the INFO
button again.
ENG-38
ENG-39
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 40
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
REPEAT Play
Super Audio CD Playback
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
Press the ➛/❿ buttons to
select Track, Group, then
press the ENTER button.
▼
2
1
DVD-AUDIO
Off
01
Track ( ): repeats the title that is playing.
Group ( ): repeats the group that is playing.
Off
Open the disc tray.
Place the Super Audio CD
disc on the tray.
- Place the Super Audio CD
disc with the labeled side up.
Close the tray.
- The tray closes and you
should get a screen.
01
Super Audio CD Clips Menu On Play Function
1
Advanced
Functions
Use the $/❷ buttons to
select a music title.
AUDIO Format Display
1
▼
During DVD AUDIO
playback, press the AUDIO
button to see AUDIO Format
information.
2
▼
DVD-AUDIO
PPCM 5.1CH
- LPCM : Linear Pulse Code Modulation.
Not compressed Audio data format.
- PPCM : Packet Pulse Code Modulation.
Lossless compressed Audio data
format.
Note
Some DVD-AUDIO discs don’t allow audio
down-mixing.
ENG-40
Press the ENTER button to
begin playback of the music
title.
- If you want to use the
Repeat Function, press
the REPEAT button to
change the mode, such as
Off, Track, Disc.
* Off : Normal Playback
* Track : Repeats the current
music title.
* Disc : Repeats the music
titles in the Super Audio
CD.
ENG-41
If you want to see information about the Disc
title and Artist, press the INFO button.
If you want to convert to regular CD mode,
press the SACD/CD button.
During play or stop mode, you can change the
2CH or MULTI mode by using LEFT/RIGHT
buttons. (You can use this function when Super
Audio CD disc includes both multi channel and
2 channel audio format.)
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 42
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Super Audio CD Clips Menu Off Play Function
1
CD Layer Play Function
1
In Stop mode, press the
DISC MENU button until the
Clips menu is off.
▼
2
You can select Info in the function menu by
pressing the MENU button.
During Super Audio CD
playback, press the
SACD/CD button to playback
the CD layer of a dual layer
Super Audio CD disc.
(Refer to the page 23 for
setting CD playback
Function).
01
0:00:13
Note
- Some Super Audio CD discs do not include a CD
layer.
- Depending on a disc, this function may not work.
During play, press the INFO
button on the remote
control.
Note
(SACD)
To access the desired Track when there is more than one in the disc.
Press the $/❷ buttons to
select the desired item.
(SACD)
Allows playback from a desired time by using the number buttons.
SACD
SACD
01
(SACD)
If you want to change the 2 channel or multi channel mode in play or stop mode, press AUDIO
button.
- You can use this function when the Super Audio CD disc includes multi channel and 2 channel
audio format.
• 2CH : L, R
• MULTI : F/L, F/R, R/L, R/R, C/T, S/W
0:00:13
MULTI
▼
4
Press the ➛/❿ buttons to
make the desired setup and
then press the ENTER
button.
You may use the number buttons of the remote
control to directly access a track and to start the
playback from the desired time.
(CD)
To access the desired Track when there is more than one in the disc.
(CD)
Allows playback from a desired time. You must enter the starting time as a reference.
5
To make the screen
disappear, press the INFO
button again.
ENG-42
ENG-43
Advanced
Functions
3
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 44
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
Clips Menu for MP3/WMA/JPEG/MPEG4
Discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that
can be organized into folders as shown below. They are similar to how you use your
computer to put files into different folders.
Open the disc tray.
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
MP3/WMA Playback
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
Off
ROOT
WMA
JPEG
MP3
Off
ROOT
ROOT
MPEG4
ROOT
WMA
JPEG
▼
MP3
MPEG4
2
Press the $/❷ or ➛/❿
buttons to select a song
file.
Press ENTER to begin
playback of the song file.
Parent Folder, Current Folder Folders and Files in
Current Folder
and Peer Folders
-
: Name of currently playing file.
-
: MP3 file icon.
Off
00:00:23
: Current Playback Time.
-
: WMA file icon.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
-
: JPEG file icon.
..
WMA
B e c a u s e Yo u
JPEG
MP3
MPEG4
-
: AVI file icon.
-
: Folder icon.
-
: Current Folder icon.
B e c a u s e Yo u
ROOT
Advanced
Functions
-
Cactus
Sad Dayu
Wonderful
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
Folder Selection
The folder can only be selected in the Stop mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the $/❷ buttons to select “..” and
press ENTER to go to the parent folder.
- To select the Peer Folder
Press the ➛/❿ buttons to highlight the left window.
Press the $/❷ buttons to select the desired folder,
then press ENTER.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
Root
WMA
JPEG
Parent Folder
MP3
MUSIC
- To select the Sub-Folder
Press the ➛/❿ buttons to highlight the right window.
Press the $/❷ buttons to select the desired folder,
then press ENTER.
Current Folder
To resume normal play, press the CLEAR button.
1st
Sub-Folders
2nd
SONG FILE 1
Peer Folders
SONG FILE 2
SONG FILE 3
MPEG4 FILES
ENG-44
When a disc that contains both MP3
and WMA files, only one type will
play, not both.
ENG-45
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 46
A D VA N C E D F U N C T I O N S
A D VA N C E D F U N C T I O N S
MPEG4 Playback
CD-R MP3/WMA file
MPEG4 Play Function
When you record MP3 or WMA files on CD-R, please refer
to the following.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft
Inc) and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 3000 files and 300 folders
per disc.
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
Off
ROOT
ROOT
WMA
JPEG
MP3
MPEG4
2
Press the $/❷ or ➛/❿
buttons to select an avi file
(DivX/XviD), then press the
ENTER button.
Advanced
Functions
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
AVI files are used to contain the audio and video data.
Only AVI format files with the “.avi” extensions can be played.
Off
B e c a u s e Yo u
RO
OO
OTT
R
. .O O T
R
WMA
o nAd e r f u l
WM
JPEG
JPEG
MP3
MP3
MPEG4
MPEG4
Repeat Playback
1
Press the REPEAT button
to change playback mode.
There are 4 modes, such
as Off, Folder, Title and
A-B (a distance between
two points appointed by
user).
- Folder : Repeats the AVI files which have the same extension
in the current folder.
- Title : repeats the title that is playing.
- A-B : repeats a segment of the file that you select.
ENG-46
ENG-47
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 48
A D VA N C E D F U N C T I O N S
MPEG4 Function Description
Function
Description
During play, press the
or
button, it moves forward
)
or backward 5 minutes.
During play, press the SERACH
( or ) button and press
Search
again to search at a faster
(
or
) speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
Allows you to search at a
Slow Motion slower speed in an AVI file.
Play
(1/8X, 1/4X, 1/2X)
Each time the STEP button
Step Motion is pressed, a new frame will
Play
appear.
Skip
(
or
ZOOM
2X/4X/2X/Normal in order
A D VA N C E D F U N C T I O N S
CD-R AVI file
Reference page
-
-
P 21
Picture CD Playback
This unit can play the following video compression formats
within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG4 Simple Profile)
- DivX 5 contents (MPEG4 simple profile plus additional
features such as bi-directional frames. Qpel and GMC are
also supported.)
- XviD MPEG4 compliant Contents.
Off
1
Select the desired folder.
ROOT
ROOT
WMA
JPEG
MP3
MPEG4
This unit supports all resolutions up to maximum below.
2
P 21
P 37
- These functions may not work depending on MPEG4 file.
DivX3.11 & DivX4 & XviD
DivX5
Bitrate may fluctuate:
Device may skip decoding
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
720 x 480 @30fps
720 x 576 @25fps
: Maximum bitrate : 4Mbps
Off
Press the $/❷ buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
ROOT
..
WMA
1
JPEG
2
MP3
3
MPEG4
3
Note
- Some MPEG4 files created on a personal computer may not be play back.
That is why Codec Type, Version and Higher resolution over specification is not supported.
- This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
- Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Album Screen
•
Slide Show
: Returns to the Album Screen.
• To see the next six pictures, press the
• To see the previous six pictures, press the
TIMER:
ENTER RETURN
button.
button.
Rotation
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
Zoom
: Press the $/❷ or ➛/❿ buttons to select the
part of the screen you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 4X. (2X ➝ 4X ➝ 2X ➝ Normal)
•
: The unit enters slide show mode.
• Before beginning the Slide Show, the picture interval must be
set. Press the ➛/❿ buttons to select a desired icon, then
press the ENTER button.
•
: The pictures change automatically with about a 6
second interval.
•
: The pictures change automatically with
about a 12 second interval.
•
: The pictures change automatically with
about a 18 second interval.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
ENG-48
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-49
Advanced
Functions
Note
- If no buttons on the remote control are pressed
for 10 seconds, the menu will disappear.
ENTER RETURN
Press the INFO button to
display the menu.
Press the ➛/❿ buttons to
select the menu you want
to view, then press the
ENTER button.
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 50
A D VA N C E D F U N C T I O N S
Chapter 5
KARAOKE FUNCTIONS
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Karaoke Functions
Operation Sequence
1
Connect the Mixed Audio
Out terminals with the TV
or Amplifier.
(see page 11 to 15)
2
Connect Mic into Mic jack.
When a MIC is connected,
the karaoke functions can
be used.
Pressing number buttons
while playing back with the
DISC MENU is set to Off
will make the player to skip
to the directed track.
1
Key Control
Karaoke
Functions
1
Playback the Karaoke
Disc containing the
wanted songs.
Press the KARAOKE
button.
2
Keycon Request
Press the ➛/❿ buttons to
select Keycon, then press
the ENTER button.
Note
- If you hear feedback(squealing or howling) while
using the karaoke feature, move the microphone
away from the speakers or turn down the
microphone volume or the speaker volume.
3
Press the ➛/❿ buttons to
change the desired tone.
- To let 7 scales down by
half scale.
- Original scale.
- To let 7 scales up by
half scale.
ENG-50
- When playing MP3, WMA, DTS and LPCM disc,
the karaoke functions will not operate.
- When the MIC is connected, Digital Out does not
work.
- If the MIC is connected in VCD 2.0, Playback is
selected to Menu off mode automatically.
- The MIC sound outputs only from Analog Audio
Out and Scart Out.
ENG-51
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 52
Karaoke Functions
Karaoke Functions
Reserving a Song
Vocal Function
It is the function to reserve the desired song in advance by use of Karaoke function.
Sequence of reservation
When pressing the
KARAOKE button twice,
this screen displays.
Vocal Fader
Guide Melody
: Off
: Off
1
Playback the Karaoke
Disc containing the
wanted songs.
Press the KARAOKE
button.
2
When pressing the
➛ button, this screen
displays.
Keycon Request
Keycon Request
Press the ➛/❿ buttons to
select Request, then press
the ENTER button.
Vocal Fader
▼
3
Request
Input the number (Track or
Chapter No.) of the desired
song into the flickering part
(--). You can reserve up to
10 songs.
When you want the next reserved song during
playing a song, press the SKIP (
) button.
When using SKIP (
at the last song.
) button, it can not work
- In VCD, SVCD or CD, you can
select only the R, L or Off.
- CD, VCD Karaoke Disc
VOCAL FADER
Remark
V1
CH1. Vocal Cancel
↓
↓
VOCAL FADER
Remark
R
Right stereo music
↓
V2
CH2. Vocal Cancel
↓
L
Left stereo music
↓
V1 + V2
CH1, CH2. Vocal Cancel
↓
OFF
Vocal Fader Off
↓
OFF
Vocal Fader Off
Karaoke
Functions
Cancellation of reservation
Guide Melody
1
- The guide melody through xylophone and piano helps you sing easily.
Press the KARAOKE
button.
Types of Karaoke disc
- DVD Karaoke Disc
2
Press the ➛/❿ buttons to
select Request, then
press the ENTER button.
3
Press the CLEAR button
to cancel the reserved
song.
The last reserved song
will be erased first.
Karaoke
-Channel
5CH. DVD
1 CH
L
Left stereo music
2 CH
R
Right stereo music Right stereo music + Vocal
3 CH
M
Guide melody
-
4 CH
V1
Vocal track
5 CH
V2
Vocal track
Channel
Keycon Request
Note
- If the reservation is required again, input the
song number in the flickering part.
- When using Request function, the “INFO” and
“REPEAT” function does not work.
- Pressing the CLEAR button when the cursor is
located on the number of the last song reserved
will cancel all reservations.
ENG-52
- CVD, VCD, CD Karaoke Disc
2CH. DVD
Channel
Karaoke
-Channel
CVD
1 CH
CH1 LEFT
1 CH
CH1 RIGHT Right stereo music + Vocal
-
2 CH
CH2 LEFT
-
2 CH
CH2 RIGHT Right stereo music
Left stereo music + Vocal
Left stereo music + Vocal
VCD, CD
Left stereo music
Right stereo music
+ Vocal
Left stereo music
Note
- This function works only on the DVD Karaoke disc on which the vocal fader or guide
melody is recorded.
ENG-53
-
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 54
CHANGING SETUP
Chapter 6
CHANGING SETUP
MENU
MENU
Setting up EZ-Setup
Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and PCM Down
Sampling in a single menu to suit your preference.
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
With the unit in Stop
mode, press the MENU
button on the remote
control.
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
❶
➂
❷
❸
❹
➎
➏
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ➛ or ENTER button.
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options.
Display Setup : Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
DivX(R) Registration : Please use the Registration code to register this player with the DivX(R)
Video On Demand format. To learn more go to www.divx.com/vod.
EZ Setup : Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and
PCM Down Sampling in a single menu to suit your preference.
Setup
3
Press the $/❷ buttons to
select EZ Setup, then
press the ➛ or ENTER
button.
4
To begin EZ Setup, press
the $/❷ buttons to select
Yes, then press the
ENTER button.
2
5
Press the $/❷ buttons to
select the desired player
menu language, then
press the ENTER button.
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
Note
Depending on the disc, some Setup menu
selections may not work.
6
Press the $/❷ buttons to
select the desired TV
Aspect, then press the
ENTER button.
(See page 66)
ENG-54
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
EZ SETUP
EZ Setup start?
Yes
No
***Current Settings***
Player Menu Language
: English
TV Aspect
: 4:3 L-Box
PCM Down Sampling
: On
EZ SETUP
Player Menu Language
English
Français
Deutsch
Español
Thai
EZ SETUP
TV Aspect
4:3 Letter Box
4:3 Pan&Scan
16:9 Wide
ENG-55
Changing
Setup Menu
Press the $/❷ buttons to
access the different
features. Press the ❿ or
ENTER button to access
the sub features.
Setup
Language Setup
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
7
Press the $/❷ buttons to
select the PCM Down
Sampling On or Off, then
press the ENTER button.
(See page 62)
8
If an AV Receiver is
connected to the TV,
press the $/❷ buttons to
select Connected, then
press the ENTER button.
Press the $/❷/➛/❿
buttons to select desired
item, then press the
ENTER button to set the
speaker. (See page 64)
Page 56
CHANGING SETUP
MENU
EZ SETUP
Off
On
Using the Player Menu Language
1
EZ SETUP
AV Receiver Connected?
Connected
Not Connected
EZ SETUP
C
L
Small
Small
LFE
R
On
Small
Small
Small
END
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
User
SR
When finished setting the
speaker, press the
$/❷/➛/❿ buttons to
select END, then press
the ENTER button.
Setup
3
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
You can also use the
RETURN button to exit.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
EZ SETUP
AV Receiver Connected?
4
Connected
Not Connected
Press the $/❷ buttons to
select Player Menu, then
press the ❿ or ENTER
button.
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
EZ SETUP
▼
Press the ENTER to
finish.
Settings complete
5
Press ENTER to exit
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
PLAYER MENU LANGUAGE
Player Menu
English
- To make the setup menu disappear, press the
MENU button.
Français
Deutsch
Español
Thai
9
Press the MENU button to
exit.
ENG-56
- The language is selected and the screen
returns to Language Setup menu.
ENG-57
Changing
Setup Menu
If an AV Receiver is not
connected to the TV,
press the $/❷ buttons to
select Not connected,
then press the ENTER
button.
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
PCM Down Sampling
SL
8-1
MENU
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
Page 58
CHANGING SETUP
MENU
Using the Disc Menu Language
MENU
Using the Audio Language
This function changes the text language only on the disc menu screens.
1
1
With the unit in Stop
mode, press the MENU
button.
With the unit in Stop
mode, press the MENU
button.
2
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
3
3
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
Press the $/❷ buttons
to select Disc Menu, then
press the ❿ or ENTER
button.
Setup
❿
Setup EZ Setup
4
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Setup
4
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
Press the $/❷ buttons to
select Audio, then press
the ❿ or ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
▼
▼
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
DISC MENU LANGUAGE
English
Disc Menu
Français
Deutsch
Español
Thai
Others
5
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
- The language is selected and the screen
returns to Language Setup menu.
AUDIO LANGUAGE
Audio
English
Français
Deutsch
Español
Thai
Original
Others
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
- Select “Others” if the language you want is
not listed.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- To make the setup menu disappear, press the
MENU button.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-58
ENG-59
Changing
Setup Menu
5
- Select “Others” if the language you want is
not listed.
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
Page 60
CHANGING SETUP
MENU
Using the Subtitle Language
MENU
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
3
Press the $/❷ buttons to
select Language Setup,
then press the ❿ or
ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
3
Press the $/❷ buttons to
select Audio Setup, then
press the ❿ or ENTER
button.
❿
Setup EZ Setup
Setup
4
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
LANGUAGE SETUP
Player Menu
: English
❿
Disc Menu
: English
❿
Audio
: English
❿
Subtitle
: Automatic
❿
4
Press the $/❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
▼
5
SUBTITLE LANGUAGE
Subtitle
Automatic
English
Français
Deutsch
Español
Thai
Others
AUDIO SETUP
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
DTS
: Off
Dynamic Compression
: On
PCM Down Sampling
: On
Speaker Setup
❿
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
- Select “Others” if the language you want is
not listed. Some discs may not contain the
language you select as your initial language;
in that case the disc will use its original
language setting.
- The language is selected and the screen
returns to setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-60
To make the setup menu disappear, press the
MENU button.
Changing
Setup Menu
Press the $/❷ buttons to
select the desired
language, then press the
❿ or ENTER button.
❿
Audio Setup
▼
Press the $/❷ buttons to
select Subtitle, then press
the ❿ or ENTER button.
Language Setup
ENG-61
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
❶
Page 62
CHANGING SETUP
MENU
Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH).
Select Bitstream when using the Digital Audio Output.
❸ DTS
Select On when connecting to a DTS Decoder.
- Off : Doesn’t output digital signal.
- On : Outputs DTS Bitstream via digital output.
Note
• There is no analog audio output when you play a DTS sound disc.
❹ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
➎ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
➏ Speaker Setup (See pages 64~65)
➂❷
MENU
Surround Sound Speaker Setup
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
3
Press the $/❷ buttons to
select Audio Setup, then
press the ❿ or ENTER
button.
Setup
4
Press the $/❷ buttons to
select Speaker Setup,
then press the ❿ or
ENTER button.
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
AUDIO SETUP
Dolby Digital Out
: PCM
MPEG-2 Digital Out
: PCM
DTS
: Off
Dynamic Compression
: On
PCM Down Sampling
: On
❿
Speaker Setup
▼
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs play back through the analog outputs.
5
Press the $/❷/➛/❿
buttons to select the
desired item, then press
the ENTER button to set
the speaker.
SPEAKER SETUP
C
L
Small
Small
Small
R
On
Small
Small
Test
SL
LFE
User
SR
• Super Audio CD
- Outputs analog signals only.
- Super Audio CD audio is only available through the analog outputs.
It is not possible to output Super Audio CD audio via the Digital Audio Output.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
ENG-62
ENG-63
To make the setup menu disappear, press the
MENU button.
Changing
Setup Menu
Note
• To make the Setup menu disappear, press the MENU button.
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
Page 64
CHANGING SETUP
MENU
The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
❶ Front
(FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the surround sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the speaker from the subwoofer.
❷ Center
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirection circuitry and outputs the bass
frequencies of the center speaker from other speakers.
❸ Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to the rear speaker’s position.
- Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear,
select either of these according to the rear speaker’s position.
This activates the Dolby Digital bass redirection circuitry and outputs the
bass frequencies of the rear speaker from other speakers.
Setting up Test
Note
To make the Setup menu disappear or return to menu screen during set up, press RETURN or
➛ button.
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
3
Press the $/❷ buttons to
select Display Setup,
then press the ❿ or
ENTER button.
4
Press the $/❷ buttons to
select the desired item,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
▼
The test output signals come clockwise starting from the Front Speaker(L).
Adjust Channel Balance so that speakers output equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
MENU
DISPLAY SETUP
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Messages
: On
❿
TV System
: PAL
Video Output
: COMPOSIT/S-VID❿
Picture Quality
❿
Changing
Setup Menu
• The subwoofer test output signal is lower than the other speakers.
• The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.
• If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.
ENG-64
To make the setup menu disappear, press the
MENU button.
ENG-65
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
❶
Page 66
CHANGING SETUP
MENU
TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan & Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video
input, you must choose “NTSC Output”.
• If your TV system only has PAL input, you
must choose “PAL Output”.
➎
TV ASPECT
4:3 Letter Box
4:3 Pan&Scan
16:9 Wide
➂
❷
❹
Picture Quality
- Black Level : Adjusts the brightness of the screen.(On or Off) It does not function in Progressive
mode.
- Sharpness : Level 1 ~ Level 5
- Brightness : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
Picture Quality
Black Level
: Off
Sharpness
: Level 3
Brightness
: Level 3
Color Saturation
: Level 3
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV
User’s Manual regarding Progressive Scan settings in the TV’s menu system.
• If Video Output is set incorrectly, the screen may be blocked.
• When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
DISPLAY SETUP
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Messages
: On
❿
TV System
: PAL
Video Output
: COMPOSIT/S-VID ❿
Picture Quality
❿
DISPLAY SETUP
COMPOSITE/S-VIDEO
Component(I-SCAN)
Component(P-SCAN)
Changing
Setup Menu
❸
Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
Video Output
Select Video Output.
- COMPOSITE/S-VIDEO : Select when you
want to use Video and S-Video Out.
- Component(I-SCAN) : Select when you
want to use Video and Component
525i(Interlace) Out.
- Component(P-SCAN) : Select when you
want to use Component 525p(Progressive)
Out.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence in no disc mode.
COMPOSITE/S-VIDEO ➝ Component(ISCAN) ➝ Component (P-SCAN) )
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
➏
MENU
Screen Messages
Use to turn on-screen messages On or Off.
TV System
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video input,
you must choose “PAL”. When you choose
“PAL”, Interlace output format is PAL 60 Hz
output.
• If your TV system only has NTSC, input you
must choose “NTSC Output”.
ENG-66
ENG-67
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
Page 68
CHANGING SETUP
MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
1
MENU
Setting Up the Rating Level
1
With the unit in Stop
mode, press the MENU
button.
With the unit in Stop
mode, press the MENU
button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
3
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Setup
3
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
4
PASSWORD CHECK
Enter your password.
Enter Password
4
Press the ❿ or ENTER
button to select Yes if you
want to use a password.
The Enter Password
screen appears.
----
PARENTAL SETUP
Use Password
: No
5
:8
Change Password
❿
❿
Enter Password
----
▼
Enter your password.
The Re-enter Password
screen appears to confirm
the password. Enter your
password again.
The player is locked ( ).
To make the setup menu disappear, press the
MENU button.
: Yes
Rating Level
Changing
Setup Menu
▼
5
CREATE PASSWORD
Press the $/❷ buttons to
select Rating Level, then
press the ❿ or ENTER
button.
PARENTAL SETUP
Use Password
6
CREATE PASSWORD
Re-enter Password
Press the $/❷ buttons to
select the Rating Level
you want, then press the
❿ or ENTER button.
e.g) Setting up in Level 6.
RATING LEVEL
Level
Level
Level
Level
Level
Level
Level
Level
8 Adult
7
6
5
4
3
2
1 Kids Safe
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
----
ENG-68
To make the setup menu disappear, press the
MENU button.
ENG-69
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
CHANGING SETUP
Page 70
Chapter 7
MENU
REFERENCE
Changing the Password
Controlling a TV with the Remote control
1
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
With the unit in Stop
mode, press the MENU
button.
TV Codes
2
Press the $/❷ buttons to
select Setup, then press
the ❿ or ENTER button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
BRAND
ANAM
AIWA
BANG&OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
CONTINENTAL EDISON
DAEWOO
3
Press the $/❷ buttons to
select Parental Setup,
then press the ❿ or
ENTER button.
The Enter Password
screen appears.
Enter your password.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
DivX(R) Registration
❿
EZ Setup
❿
▼
4
Press the $/❷ button to
select Change
Password, then press the
❿ or ENTER button.
Enter your new password.
Re-enter the new
password again.
PARENTAL SETUP
Use Password
: Yes
Rating Level
:8
To make the setup menu disappear, press the
MENU button.
❿
❿
Change Password
CHANGE PASSWORD
Enter New Password
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
CODE
10, 11, 12, 13, 14, 15, 16, 17, 18
82
57
71
73
57
52
75
19, 20, 23, 24, 25, 26, 27, 28, 29,
30 , 31, 32, 33, 34
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
06, 19, 20, 21, 22, 78
06, 69
06, 57
40
57
06, 48, 62, 65
52, 77
83
68
66
BRAND
NORDMENDE
NOKIA
PANASONIC
PHILIPS
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
REX
SABA
SALORA
SAMSUNG
SANYO
SCHNEIDER
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
YOKO
ZENITH
1.Turn on the TV.
2.Point the DVD’s remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
----
CHANGE PASSWORD
----
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
You can control the TV POWER, CH ( ,
), VOL (+, -) and TV/VIDEO
functions of another manufacturer's TV.
- The remote control may not be able to control every model TV of the brands listed.
- If you replace the remote control's batteries, set the brand code again.
e.g) For Samsung 2 TVs
While holding down the TV POWER button, enter 0 and then 1.
ENG-71
Reference
Re-enter Password
ENG-70
CODE
72, 73
74
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
45, 46
74
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
41, 42, 43, 44, 48
06
74
36, 37, 38, 39, 48
71
57
57
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
57
06
63
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 72
REFERENCE
REFERENCE
Firmware upgrade
Troubleshooting
Introduction
Before requesting service (troubleshooting), please check the following.
Samsung will often support the software upgrade to improve the performance of this unit to the latest
status, through Samsung Internet Site (www.samsung.com).
Because the specially new MPEG4 codec continues and it is appearing. What improvements are
made depends on the upgrade software you are using as well as the software that your DVD-player
contained before the upgrade.
No operations can be
performed with the
remote control.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings:
1
You have to download a new file
through Download Center of
Samsung Internet Site
(www.samsung.com).
2
Note
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Write the file to Disc using
CD-RW of your computer.
Upgrade procedure
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
The Firmware upgrade
screen appears.
Firmware upgrade
appears on the display
▼
2
Press the ➛/❿ buttons to
select Total, then press the
ENTER button.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound is
not being reproduced.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P7
P17
P61~62
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blocked
• Press the
button for more than 5 seconds under no disc inside.
All settings will revert to the factory settings.
P18
• Press the
button for more than 5 seconds under no disc inside.
All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
P68~70
Forgot password
- If the unit was successfully updated, the unit
will turn off and on after closing the tray
automatically. When the unit turns on, this
screen will display.
If you experience other
problems.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest authorized
service center.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
P54~70
P65~67
P61~62
P2
Reference
ENG-72
P4
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Note
- If the “Select Menu Language” doesn't appear,
please contact to “Samsung Service Center”.
- Do not press any button and unplug the power
code during upgrade.
- The upgrade procedure may change, refer to
the web site (www.samsung.com).
Press the number buttons
to select the desired
language.
Page
The
icon appears
on screen.
- In the middle of the writing, the tray will open
automatically. After taking out the disc,
please wait for about 2 minutes.
Firmware upgrade starts
3
Action
Problem
ENG-73
00xxxx-P650K-XST-2 eng
6/2/05
08:01pm
Page 74
MEMO
REFERENCE
Specifications
General
Power Requirements
AC 110 - 240V ~ 60/50 Hz
Power Consumption
14W
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
+5°C to +35°C
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-Video
2 Channel
5.1 Channel
Digital Audio Output
Audio
Output
430mm (W) X 250mm (D) X 49mm (H)
CD : 12Cm
(COMPACT DISC)
VCD : 12Cm
Video
Output
2.0 Kg
*Frequency Response
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
L(1/L), R(2/R)
F/L, F/R, R/L, R/R, C/T, S/W
Optical/Coaxial
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
ENG-74
ENG-75
Download PDF