Samsung | DVD-M208K | Samsung DVD-M208K User Manual

M208Cover00858F
5/21/03 10:05 AM
Page 2
DVD-M208K
ENG
AH68-00858F
M208K(Asia)00858F
5/21/03 10:05 AM
Page 2
Precautions
1. Setting up
Precautions
1
Ensure that the mains supply in your house complies whit that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture), with
enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. Do not
stack other, or heavy devices on top over the player. Do not place the player on amplifiers or other
equipmentwhich may become hot. Before moving the player ensure the disc tray empty. This player is
designed for continuous use. Switching off the DVD player to the stand-by mode dose not disconnect the
electricity supply In order to separate the player completely from the mains,it has to be disconnected by
unplugging the main plug, especially when left unused for a long period of time.
2. Caution
Protect the player from moisture(dripping or splashing and that no objects filled with liquids,such as
vases, shall be placed on the player), and excess heat(e.g.fireplace) or equipment creating strong
magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the mains electricity supply if
the player malfunction. Your player is not intended for industrial use but for domestic purposes only. Use
of this product is for personal use only. Condensation If your player or disc have been stored in a cold
atmosphsre, as for example during transportation in the winter, wait for approximately 2 hours until they
have reached room temperature.
3. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes close
to the opening of the disc tray or any other opening to look inside the player.
2
3
4
5
4. Disc
Be careful handle your discs with care. Hold a disc whit finger on the border or hole. Always place disc
with the label facing upward (in case of a single side disc ). Always use a soft cloth to clean disc if necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store
in vertical position. Always place the disc properly into the tray using the proper guide area. Never use
record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty.
Wipe gently with a soft damp(water only) cloth, never wipe the disc in a circular motion, since circular
scratches are likely to occur and could case noise during playback.
5. Battery
The battery used in this product contains the chemicals that are harmful to the environment.
Do not dispose of batteries in the general household waster. It is recommended that the replacement
of the battery should be done by technician.
6. Maintenance of cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
M208K(Asia)00858F
5/21/03 10:05 AM
Page 4
TABLE OF CONTENTS
Before You Start
SETUP
General Features ..............................................................................................6
Disc Type and Characteristics .......................................................................... 7
Description-Front Panel ....................................................................................8
Description-Rear Panel......................................................................................9
Tour of the Remote Control..............................................................................10
Accessories
CONNECTIONS
Choosing a Connection ..................................................................................12
KARAOKE
Remote Control
3
Replace the battery cover.
• Check if the batteries are drained.
• Check if remote sensor is blocked by
obstacles.
• Check if there is any fluorescent
lighting nearby.
• DVDs/VCDs/CD-Rs recorded in a format different from the global DVD
player formats adopted by Samsung, may not be played.
• Some discs recorded under different manufacturing quality, may not be
played.
4
Beginning Karaoke Functions ........................................................................29
Reserving a Song ..........................................................................................30
Vocal Function ..............................................................................................31
Using the Setup Menu ....................................................................................32
Setting Up the Language Features ..................................................................33
Setting Up the Parental Control ......................................................................35
Setting Up the Audio Options ........................................................................36
Setting Up the Display Options ......................................................................37
REFERENCE
2
Insert two AA batteries. Make
sure that the polarities (+ and -)
are aligned correctly.
• Check the polarity + - of the batteries
(Dry-Cell)
CHANGING
SETUP MENU
Open the battery cover on the
back of the remote.
KARAOKE
FUNCTIONS
1
If remote doesn’t operate
properly:
S.FIT Play ......................................................................................................20
Digest Play ....................................................................................................21
Slow Repeat play ..........................................................................................22
Using the Disc View Function ..........................................................................23
Selecting the Audio Language ........................................................................24
Selecting the Subtitle Language ......................................................................25
Changing the Camera Angle ..........................................................................26
Using the Bookmark Function ..........................................................................27
Using the Zoom and 3D Sound Functions........................................................................28
ADVANCED
FUNCTIONS
Install Batteries in the
Remote
Video/Audio Cable
Playing a Disc................................................................................................14
Using the Search & Skip Functions ............................................................16
Using the Display Function..............................................................................17
Repeat Play ..................................................................................................18
Program Play & Random Play ........................................................................19
BASIC
FUNCTIONS
User’s Manual
Batteries for
Remote Control (AA Size)
Troubleshooting..............................................................................................38
Specifications ................................................................................................39
5
M208K(Asia)00858F
5/21/03 10:05 AM
Page 6
General Features
Disc Type and Characteristics
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
Screen
Both regular and widescreen (16:9) pictures
can be viewed.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
DVD
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
NOTE
* To ensure proper playback of discs burned from MP3
files, make sure the files have been recorded at a bit
rate of at least 128kbps.
* If there are any gaps (blank data) on multi-session
discs, you may experience playback problems.
* On discs that are recorded with a Variable Bit
Rate(VBR),
e.g. from 32 to 320 kbps, the sound may cut in and
out.
Disc Size
Max.
Playing Time
12Cm
Single-sided
240 min.
Double-sided
480 min.
8Cm
Single-sided
80 min.
Double-sided
160 min.
12Cm
74 min.
Audio
+
Video
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order.
Recording
Types
VIDEO-CD
Audio
+
Video
AUDIO-CD
SETUP
Excellent Sound
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the onscreen menu.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
8Cm
20 min.
12Cm
74 min.
8Cm
20 min.
Audio
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Disc Markings
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
6
~
• Play
Region
Number
PAL
• PAL broadcast
system in U.K,
France,
Germany, etc.
• Dolby
Digital disc
STEREO
DIGITAL
SOUND
• Stereo disc
• Digital
Audio disc
• DTS disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
M208K(Asia)00858F
5/21/03 10:05 AM
Page 8
Description-Front Panel
Description-Rear Panel
SETUP
Front Panel Controls
1 STANDBY / ON
• When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on.
2 MIC 1
6
7
8
• Connect microphone 1 for Karaoke functions.
9
3 MIC 2
4
5
• Connect microphone 2 for Karaoke functions.
VOLUME
• Use to adjust microphone volume level.
DIGITAL ECHO
• Use to adjust echo delay.
10
11
DISC TRAY
• Load the disc here.
DISPLAY
• Operation indicators are displayed here.
OPEN/CLOSE
• Press to open and close the disc tray.
PLAY/PAUSE
• Begin or pause disc play.
STOP
• Stops disc play.
SKIP
• Use to skip a scene or music.
1
2
3
4
5
6
Rear Panel
1 DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2 ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3 VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
4 S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
5 COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in
the VIDEO OUT SELECT.
Front Panel Display
1
2
3
4
5
6
7
8
8
Angle indicator. You can select multiple angles
of a scene recorded by different cameras.
Disc type indicators
Reverse play / Pause / Forward play
Lights when 3D surround is turned on.
DVD : Title number
DVD : Chapter number.
Video/Audio CD : Track number
Repeat play mode
9
10
11
12
13
14
Linear PCM audio output
PAL indicator
Dolby Digital Disc
DTS (Digital Theater System) output
MPEG-2 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, RANDOM,
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
6 VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If Y, Pb, Pr is selected, S-Video may not work. If S-Video is selected, Y,
Pb, Pr may not work.
9
M208K(Asia)00858F
5/21/03 10:05 AM
Page 10
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
17
2
18
3
4
5
19
20
6
7
8
17
TV POWER Button
NUMBER Buttons
18
3D Button
3
STEP Button
19
OPEN/CLOSE Button
4
VOLUME Buttons
20
CHANNEL Buttons
5
TV/VIDEO Button
21
DIGEST Button
6
ZOOM Button
22
7
S.FIT Button
8
SEARCH Buttons
10
11
12
13
15
BOOKMARK Button
25
DISPLAY Button
10
RETURN Button
• Returns to a previous menu.
KARAOKE
SUBTITLE Button
13
ANGLE Button
• Use to access various camera angles on a DVD.
15
MENU Button
• Brings up the Disc menu.
CLEAR Button
• Use to remove menus or status displays from the
screen.
16
SLOW Button
27
ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT buttons)
• This button functions as a toggle switch.
28
TOP MENU
• Takes you to the menu on the DVD disc or CD/VCD.
29
REPEAT Button
• Allows you to repeat play a title, chapter, track,
or disc.
30
MODE Button
• Allows you to program a specific order.
31
KARAOKE Button
• Use to begin Karaoke functions.
32
32
AUDIO Button
• Use this button to access various audio functions
on a disc.
SETUP Button
12
27
16
• Displays the current disc mode.
26
• Brings up the DVD player’s Setup menu.
14
30
31
• Use to skip the title, chapter, or track.
STOP Button
25
26
29
SKIP Buttons
9
28
14
23
24
11
22
23
24
PLAY/PAUSE Button
• Begin/Pause disc play.
• Allows you to search forward/backward
through a disc.
21
9
10
DVD POWER Button
2
SETUP
1
1
VOL.CON. Button
• To control the master volume of the player.
11
M208K(Asia)00858F
5/21/03 10:05 AM
Page 12
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Basic Audio
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
CONNECTIONS
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for more information
on those particular components.
TV
Connection to an Audio System
Method 1
AV Cable
Method 2
R
L
Video Cables
OR
AUDIO
2ch Amplifier
Audio Input Jacks
S-Video
Cable
OR
ANALOG AUDIO OUT
DVD
Dolby Digital Decoder
Digital Audio Input Jacks
R
L
Audio Output Jacks Video Output Jack S-Video Jack
OR
• Method 1
• Method 2
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3
DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
ANALOG AUDIO OUT
Component Video
Jacks
DVD
R
L
Analog Audio Out
Digital Audio Out
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
12
13
M208K(Asia)00858F
5/21/03 10:05 AM
Page 14
Playing a Disc
Playing a Disc
7
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you
press the DVD POWER button, this screen comes
up :
If you want to select the language, press a NUMBER button. (This screen will
only appear the very first time you plug in the player.)
1
2
3
4
5
6
Press the OPEN/CLOSE button.
Press
Touche
Drücke
Pulsar
Premere
Toets
1
2
3
4
5
6
for English
pour Français
für Deutsch
para Español
per ltaliano
voor Nederlands
8
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal play.
(You can only perform step motion play in the forward direction.)
Slow Motion Play (Except CD).
Press the FWD SEARCH or REV SEARCH button on the remote during PAUSE or
STEP mode.
- By pressing the FWD or SEARCH button, you can select slow motion play for 1/8,
1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal play.
- When playine a VCD, the reverse slow motion play will not work.
BASIC
FUNCTIONS
Play
SELECT MENU LANGUAGE
Step Motion Play (Except CD).
The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label
facing up.
Press the PLAY/PAUSE button or OPEN/CLOSE button to close the disc tray.
Stopping Play.
Press the STOP button during play.
Removing Disc.
RESUME function
Press the OPEN/CLOSE button.
Pausing Play.
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).
Press the PLAY/PAUSE or STEP button on the remote during play.
- Screen stops, no sound.
NOTE
- To resume again, press PLAY/PAUSE button once again.
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to
resume normal play.
• This
icon indicates an invalid button press.
14
15
M208K(Asia)00858F
5/21/03 10:05 AM
Page 16
Using the Search & Skip Functions
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Using the Display Function
When Playing a DVD
play, press the DISPLAY button
1 During
on the remote.
Searching through a Chapter or Track
play, press the FWD or REV SEARCH
button on the remote.
1 During
DVD X2, X4, X8, X16, X32, X128
VCD X4, X8
CD
X2, X4, X8
• Depending on the disc, audio may
not be heard when a disc is in X2
play mode.
• When playing a DVD, if you press the NEXT SKIP button,
it moves to next chapter. If you press the BACK SKIP button, it
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1
or a CD, if you press the NEXT SKIP button, it moves to next
track. If you press the BACK SKIP button, it moves to the
beginning of the track. One more press makes it move to the
beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you
press the NEXT SKIP button, it moves forward 5 minutes. If you
press the BACK SKIP button, it moves backward 5 minutes.
• When playing a VCD 2.0 in the MENU MODE or Track View
function, if you press the NEXT SKIP button, it moves to the
next MENU or the next Track View display.
If you press the BACK SKIP button, it moves to the previous
MENU or the previous Track View display. (See page 23.)
16
ENG 5.1CH
C:01
ENG
0:00:05
64
Off
the DISPLAY button on the
2 Press
remote twice.
- Current audio, subtitle and volume control will
appear.
- To make the screen disappear, press the DISPLAY
button again.
Skipping Tracks
play, press the NEXT SKIP or BACK SKIP
2 During
button.
T:01
BASIC
FUNCTIONS
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster speed
(X2/X4/X8/X16/X32/X128 normal speed, in order) on the
DVD.
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster
speed(X2/X4/X8/normal speed in order) on VCD and CD.
• To return to normal speed play, press the PLAY/ PAUSE
button.
DVD
- Current title, chapter number and elapsed time
will be displayed.
• Use the LEFT/RIGHT buttons to select a title or a
chapter number.
Use the UP/DOWN button or Number buttons to
enter a different title or chapter number, then
press the ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT buttons to select, then use
the Number buttons to enter the time. Then press
the ENTER button.
When Playing a CD/VCD
1
During play, press the DISPLAY button
on the remote.
- Current track number, elapsed time and volume
control will be displayed.
• Use the LEFT/RIGHT buttons to select a track.
Use the UP/DOWN button or Number buttons
to enter a different track number, then press the
ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT buttons to select, then use
the Number buttons to enter the time. Press the
ENTER button.
- To make the screen disappear, press the DISPLAY
button again.
VCD
(Menu off)
VCD
T:01
0:06:54
64
T:01
0:06:54
64
VCD
(Menu on)
64
CD
CD
NOTE
• What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
17
M208K(Asia)00858F
5/21/03 10:05 AM
Page 18
Repeat Play
Program Play & Random Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Program Play (DVD/VCD/CD)
When playing a DVD
DVD
Chapter
Title
A-B
Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
- A-B Repeat
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
3
4
Off
Track
Disc
Chap. (T:01)
Program Order
01 02 03 04
Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
Press the PLAY/PAUSE button. The disc will be
played in programmed order.
RETURN
CLEAR
ENTER
PLAY
PROGRAM 02
Chap. (T:01)
Program Order
01 02 03 04
RETURN
01
CLEAR
ENTER
PLAY
A-B
Press ENTER.
To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
18
Use the LEFT/RIGHT buttons to select the first
chapter (or track) to add to the program. Press
the ENTER button. The selection numbers appear
in the Program Order box.
4
VCD/CD
Off
3
PROGRAM 01
BASIC
FUNCTIONS
1
2
Press the REPEAT button on the remote. Repeat
screen appears.
1
2
Press the MODE button.
Random Play (DVD/VCD/CD)
1
2
Press the MODE button.
PROGRAM
RANDOM
Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
The disc will be played in random order.
NOTE
• Depending on the disc, the Program and Random Play function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• To resume normal play, press the CLEAR button.
19
M208K(Asia)00858F
5/21/03 10:05 AM
Page 20
S.FIT Play
Digest Play
Screen Fit Play
1
Press Screen FIT button on remote control.
- Allows you to eliminate the black bars in the top and bottom
of the screen when a movie is playing in the Widescreen
format(16:9).
- Screen Fit will not work when the Zoom mode is active.
(you can not remove the black bars on the screen)
However, Zoom mode will work when Screen Fit is active.
Digest Play
1 During play, Press the DIGEST button.
- You'll see the 9 individual windows representing each of the
chapters on the TV screen.
- When each window is displayed, the first 3 seconds of the
chapter will be played.
Up/Down/LEFT/RIGHT buttons to select the
window you'd like to see, and press the ENTER
2 Press
button.
• Up to 9 windows(chapters) can be displayed on the screen
at a time.
Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
DIGEST
01
02
03
04
05
06
07
08
09
10
11
12
13
14
skip button
DIGEST
ADVANCED
FUNCTIONS
NOTE
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
20
NOTE
• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.
• 'DIGEST' may not operate depending on the disc in use.
21
M208K(Asia)00858F
5/21/03 10:05 AM
Page 22
Using the Disc View Function
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
Track View (VCD)
Displays the beginning view of each track and the
track number.
When playing a DVD
Press the PLAY/PAUSE button.
3
4
5
Press the REPEAT button. Select A-B on screen with the LEFT/RIGHT buttons on the
remote.
Press the F/SEARCH button to choose the play speed between X1/8, X1/4, and
X1/2 of normal.
Press the ENTER at the point where the function starts.(A)
Press the ENTER at the point where the function ends.(B)
NOTE
• The disc will play only from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button.
• B-point may be designated only when 4second pass at the normal speed (time indicated on the A FLT) after
designating the A-point.
22
4
Press the ENTER button.
View
ENTER
1 Track View
2 Index View
TRACK VIEW
01
02
03
04
05
06
07
08
09
01
02
03
04
05
06
07
08
09
example
ADVANCED
FUNCTIONS
1
2
1 During play, press the TOP MENU button.
the UP/DOWN buttons to select TRACK
2 Press
VIEW. Press the ENTER button.
the desired view by pressing the
3 Select
UP/DOWN or LEFT/RIGHT buttons.
Disc
Index View (VCD)
Displays the equally divided 9 views of the current
playing track.
1
UP/DOWN buttons to select INDEX
2 Press
VIEW. Press the ENTER button.
the desired view by pressing
3 Select
UP/DOWN or LEFT/RIGHT buttons.
4 Press the ENTER button.
During play, press the TOP MENU button.
INDEX VIEW
example
NOTE
• In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed.
• When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
• When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
23
M208K(Asia)00858F
5/21/03 10:05 AM
Page 24
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
1
the UP/DOWN buttons to select the
2 Use
desired language on a DVD.
- The audio languages are represented by
abbreviations.
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
Using the AUDIO button
Press the AUDIO button.
Selecting the Subtitle Language
DVD
ENG DOLBY DIGITAL 5.1CH
VCD
Stereo
the UP/DOWN buttons to select
3 Use
Stereo, Right or Left. (On VCD/CD)
1
2
3
Press the SUBTITLE button.
Use the UP/DOWN buttons to select the
desired subtitle language.
ENG
Off
ENG
On
Use the LEFT/RIGHT button to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
ADVANCED
FUNCTIONS
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
24
25
M208K(Asia)00858F
5/21/03 10:06 AM
Page 26
Changing the Camera Angle
Using the Bookmark Function
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Using the ANGLE button
Using the Bookmark Function (DVD/VCD)
Press the ANGLE button to see if an ANGLE (
mark is present at the upper right hand corner of
the screen.
1
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner
of the screen.
4/6
example
Use the UP/DOWN buttons to select the
desired screen angle.
To turn off the display, press the ANGLE
button again.
Recalling a Marked Scene
Press the VOL.CON. button. Use the
UP/DOWN buttons to select a suitable
volume.
64
- Master Volume Control function lets you adjust the
volume of the player’s output. This is useful for matching
the player’s output level to other equipment in your system.
- Volume control is only operative when using the
Analog Audio outputs.
- There are up to 64 levels. Lowering each level
reduces the audio level by 0.5dB.
NOTE
•The Master Volume must be reset for each disc you play. Once a disc is done playing, the Master Volume
returns to the default position (64).
26
ENTER
the BOOKMARK button to turn off the
display.
4 Press
Master Volume Control Function
1
play, press the BOOKMARK button on the
remote. The Bookmark icons will be displayed.
1 During
the LEFT/RIGHT button to move to the
desired bookmark icon.
2 Use
you reach the scene you want to mark,
press the ENTER button. The icon will change to
3 When
a number (1, 2, or 3).
ADVANCED
FUNCTIONS
2
3
)
play, press the BOOKMARK button on
the remote.
1 During
the LEFT/RIGHT button to select a marked
scene.
2 Use
the PLAY/PAUSE button to skip to the
marked scene.
3 Press
1
PLAY
CLEAR
Clearing a Bookmark
1
2
3
During play, press the BOOKMARK button
on the remote.
Use the LEFT/RIGHT button to select the
bookmark number you want to delete.
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
NOTE
• Up to three scenes may be
marked at a time.
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
• Depending on the disc, the
Bookmark function may not work.
27
M208K(Asia)00858F
5/21/03 10:06 AM
Page 28
Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
Beginning Karaoke Functions
Operation Sequence
play or pause mode, press the
1 During
ZOOM button on the remote. A square will
be displayed on screen.
the Mixed Audio Out terminals with
1 Connect
the TV or AMP.
2 Press the power button.
Mic into Mic 1 or Mic 2 jack. Then
3 Connect
the karaoke mode is transferred to ON
mode.
the UP/DOWN or LEFT/RIGHT
2 Use
button to select the part of the screen you
want to zoom in on.
3 Press the ENTER button.
KARAOKE : on
KEYCON
REQUEST
- To disconnect the Mic makes the karaoke mode transfer
to OFF mode automatically.
- During DVD play, press ENTER to zoom in
X2/X4/X2/Normal in order.
- During VCD play, press ENTER to zoom in
X2/normal in order.
Using the 3D Sound Function
play, press the 3D SOUND button.
1 During
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
the UP/DOWN buttons to turn the 3D
2 Press
Sound feature on or off.
Off
the KARAOKE button makes the
1 Pressing
karaoke ON mode.
the "KEYCON" using the LEFT/RIGHT
2 Select
buttons.
of the LEFT/RIGHT buttons, change to
3 Bythe usedesired
tone.
KARAOKE : on
: To let 7 scales down by half scale.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
KEYCON
REQUEST
KARAOKE
FUNCTIONS
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
Key Control
: Original scale.
: To let 7 scales up by half scale.
NOTE
• Key control function is not applied to the Mic output.
• If you hear strange noises(squealing or howling) while using the karaoke
feature, move the microphone away from the speakers. Turning down the
microphone volume or the speaker volume is also effective.
• MIC does not operate when KARAOKE is in OFF mode.
• The next music plays if performing SEARCH with SCORE displayed in the
SCORE ON MODE for CD or VCD.
28
• When playing MP3 disc, MIC & Karaoke functions are not operate.
29
M208K(Asia)00858F
5/21/03 10:06 AM
Page 30
Reserving a Song
Vocal Function
It is the function to reserve the desired song in advance by use of Karaoke function
Sequence of reservation
1
2
3
4
5
Playback the Karaoke Disc containing the
wanted songs.
1
KARAOKE : on
KEYCON
Pressing the KARAOKE button twice displays the
following in Karaoke ON mode:
VOCAL FADER
↓
REQUEST
03 02
Input the number (Track No.) of the
desired song into the flickering part (--).
Cancel by pressing the CLEAR button of
the remote.
- The last reserved song will be erased first.
Continuous pressing of the CLEAR button
can cancel the next reserved song.
If the reservation is required again, input
the song number in the flickering part.
NOTE
• Request function is available only when the Karaoke mode is "ON".
CH1. Vocal Cancel
↓
V2
↓
1+2
CH1, CH2. Vocal Cancel
↓
OFF
Vocal Fader Off
CH2. Vocal Cancel
– In VCD, CVD or CD, you can select only the ON or OFF.
- You can reserve up to 10 songs.
When you want the next reserved song
during playing a song, press the SKIP
button.
Remark
V1
Guide Melody
– To guide melody through xylophone and piano help you sing
easily.
– This function works only on the DVD Karaoke disc on which the
guide melody is recorded.
Score Function
KARAOKE
FUNCTIONS
2
3
: off
: off
: off
Vocal Fader
REQUEST
Cancellation of reservation
1
VOCAL FADER
GUIDE MELODY
SCORE MODE
– The function to make the music only sound by cancelling vocal
when playing a Karaoke disc.
After pushing the KARAOKE button of the
remote transfer to the Karaoke ON mode
using the UP/DOWN buttons.
Select the "REQUEST" using the
LEFT/RIGHT buttons.
Sequence of reservation
Press KARAOKE button twice to turn the Score Mode On.
-Score will pop up whenever a song is completed.
CAUTIONS
-Make sure to turn the KARAOKE MODE to OFF to play a movie disc or play in a general mode. If you play a
movie disc with the SCORE ON, a score will show up every time when a chapter is over.
Types of Karaoke disc
• DVD Karaoke Disc
Karaoke
Channel
-Channel
1 CH
• CVD, VCD Karaoke Disc
5CH. DVD
2CH. DVD
Channel
Karaoke
-Channel
CVD
L
Left stereo music
Left stereo music + Vocal
1 CH
CH1 LEFT
Left stereo music + Vocal
1 CH
CH1 RIGHT
Right stereo music + Vocal
VCD, CD
Left stereo music
2 CH
R
Right stereo music
Right stereo music + Vocal
• When using "SKIP" button, it can not work at the last song.
3 CH
M
Guide melody
-
• When using Request function, the "DISPLAY" and “REPEAT” function does not work.
4 CH
V1
Vocal track
-
2 CH
CH2 LEFT
Left stereo music
-
5 CH
V2
Vocal track
-
2 CH
CH2 RIGHT
Right stereo music
-
30
Right stereo music
+ Vocal
31
M208K(Asia)00858F
5/21/03 10:06 AM
Page 32
Setting Up the Language Features
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of television
screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance, they will come
up automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop mode, press the SETUP button
on the remote.
Player Menu : Setup of the Display Language
Use the Player preference menu to select the
language for the player’s on-screen displays.
SETUP MENU
1
2
3
4
5
6
7
Player Menu
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
RETURN
English
English
English
Automatic
Unlocked
ENTER
Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the language you want a
DVD’s disc menu to be displayed in.
Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack language.
- English is selected and the screen returns to
SETUP MENU.
Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the language the disc’s
subtitles are to be displayed in.
- To make the SETUP MENU disappear, press the
RETURN button.
Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject
matter, etc.
Press the ENTER button to access the sub features.
To make the setup screen disappear after setting up, press the
SETUP button again.
This function changes the text language only
on the disc menu screens.
NOTE
• Depending on the disc, some
Setup Menu selections may not
work.
32
Player Menu
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
English
Automatic
Unlocked
RETURN
ENTER
PLAYER MENU LANGUAGE
1
2
3
4
5
6
English
Français
Deutsch
Español
Italiano
Nederlands
ENTER
the unit in Stop mode, press the
SETUP button.
1 With
the UP/DOWN buttons to select
DISC MENU.
2 Use
3 Press the ENTER button.
the UP/DOWN button to select
‘English’.
4 Use
e.g Setting up in English.
DISC MENU LANGUAGE
1
2
3
4
5
6
7
English
Français
Deutsch
Español
Italiano
Nederlands
Others
RETURN
ENTER
CHANGING
SETUP MENU
3
SETUP MENU
1
2
3
4
5
6
7
RETURN
Display Options : Setup of the Display Options
Use to select which type of screen you want to watch and several
display options.
Use the UP/DOWN buttons on the remote to access
the different features.
e.g Setting up in English.
Using the Disc Menu Language
Audio Options : Setup of the Audio Options
2
the unit in Stop mode, press the
1 With
SETUP button.
the UP/DOWN buttons to select the
2 Use
PLAYER MENU.
3 Press the ENTER button.
the UP/DOWN buttons to select
4 Use
‘English’.
5 Press the ENTER button.
-Select “Others” if the language you want is not
listed.
5 Press the ENTER button.
-English is selected and the screen returns to
SETUP MENU.
33
M208K(Asia)00858F
5/21/03 10:06 AM
Page 34
Setting Up the Language Features
Setting Up the Parental Control
Using the Audio Language
the unit in Stop mode, press the SETUP
button.
1 With
2 Press the UP/DOWN buttons to move to AUDIO.
3 Press the ENTER button.
4 Press the UP/DOWN buttons to select ‘ENGLISH’.
AUDIO LANGUAGE
1
2
3
4
5
6
7
8
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
RETURN
ENTER
- Select “Original” if you want the default soundtrack language
to be the original language the disc is
recorded in.
- Select “Others” if the language you want is not listed.
5
- English is selected and the screen returns to SETUP MENU.
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
SUBTITLE LANGUAGE
1
2
3
4
5
6
7
8
RETURN
Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
ENTER
5
34
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
• How to make the SETUP MENU disappear or return to menu screen
during set up; Press RETURN button.
1 Use Password
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/RIGHT to select No in
Use Password.
the Change Password ;
6 -About
Use UP/DOWN to select Change Password.
The Change Password screen appears.
- Enter your new password. Re-enter the new
password again.
No
RETURN
ENTER
CREATE PASSWORD
Enter Password
RETURN
PRESS 0-9
PARENTAL CONTROL
1 Use Password
2 Rating Level
3 Change Password
RETURN
Yes
1
ENTER
e.g Setting up in LEVEL6.
RATING LEVEL
Level
Level
Level
Level
Level
Level
Level
Level
8 Adult
7
6
5
4
3
2
1 Klds Safe
RETURN
CHANGING
SETUP MENU
- Select “Automatic” if you want the subtitle language to be
NOTE
the same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some
discs may not contain the language you select as your initial • If the selected language is not
recorded on the disc, the original
language; in that case the disc will use its original language
pre-recorded language is selected.
setting.
PARENTAL CONTROL
Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
the Rating Level ;
5 About
The Rating Level will work only when Use
Using the Subtitle Language
1
2 Use the UP/DOWN buttons to select SUBTITLE.
3 Press the ENTER button.
4 Use the UP/DOWN buttons to select ‘ENGLISH’.
the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
1 With
UP/DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
2 Use
LEFT/RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
3 Use
screen appears.
4
Press the ENTER button.
With the unit in Stop mode, press the SETUP
button.
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
ENTER
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
35
M208K(Asia)00858F
5/21/03 10:06 AM
Page 36
Setting Up the Audio Options
the unit in Stop mode, press the SETUP
button.
1 With
the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
2 Use
the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
3 Use
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
Setting Up the Display Options
AUDIO OPTIONS
1
2
3
4
5
6
Dolby Digital Out
MPEG-2 Digital Out
DTS
Dynamic Compression
2X Scan Audio
Speaker
PCM
PCM
Off
On
Off
RETURN
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
N O T E : Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn’t output digital signal.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
X2 Scan Audio
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
DISPLAY OPTIONS
1
2
3
4
5
6
7
TV Aspect
Still Mode
Screen Massages
Front Display
Black Level
Quasi-PAL
SCART Output
RETURN
4:3 L-Box
Auto
On
Auto Dim
Off
On
RGB
ENTER
TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display
small text clearer.
1. Field : Select this feature when the screen shakes in the Auto mode.
2. Frame : Select this feature when you want to see small letters more clearly
in the Auto mode.
3. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
CHANGING
SETUP MENU
1. On : Turns X2 audio on.
2. Off : Turns X2 audio off.
Though X2 Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
the unit in Stop mode, press the SETUP
button.
1 With
the UP/DOWN buttons to select DISPLAY OPTIONS.
Then press the ENTER button.
2 Use
the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
3 Use
Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode.
• Certain audio features of this product manufactured under a license from Deeper Products, Inc.
Spatializer® and circle-in-square device are trademarks owned by Deeper Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
36
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
37
M208K(Asia)00858F
5/21/03 10:06 AM
Page 38
Troubleshooting
Specifications
Before requesting service (troubleshooting), please check the following.
Action
Problem
Page
General
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
P4
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P7
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
No operations can be
performed with remote.
The
icon appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
15 W
Weight
2.8 Kg
Dimensions
Operating Temperature Range
DVD:12Cm
(DIGITAL VERSATILE DISC)
Disc
P12
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
P15
• Check if the disc has a Menu.
P32~33
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P32~36
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your DVDs.
P36
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P36
Forgot password
• Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
38
AC 110 ~240V, 50/60 Hz
Power Consumption
Operating Humidity Range
Disc Menu doesn’t appear.
If you experience other
problems.
Power Requirements
Video
Output
Composite Video
Component Video
S-VIDEO
2 Channel
Audio
Output
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
430mm ✕ 240mm ✕ 79mm
+5°C to +35°C
10 % to 75 %
Reading Speed : 3.49m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 1.2 to 1.4m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4m/sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110dB (Karaoke off Mode)
100dB (Karaoke off Mode)
0.004 % (Karaoke off Mode)
*: Nominal specification
P35
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
39
M208K(Asia)00858F
5/21/03 10:06 AM
Page 40
Memo
Memo
Download PDF