Samsung | UA32K4001AJ | Samsung UA32K4001AJ User manual

Contents
Channel Setting
Advanced Features
●● Using the INFO button1
●● Connecting a USB Device67
●● Memorizing Channels2
●● Using the Media Play73
●● Using the Channel menu5
●● Playing the Photos / Videos / Music75
●● Locking Programme17
●● Using the Football Mode83
●● Other Features18
●● Using the Screen&Sound Capture function84
●● Viewing the e-Manual87
Basic Features
●● Using the Self Diagnosis88
●● Updating the Software90
●● Changing the Preset Picture Mode25
●● Changing the Use Mode93
●● Adjusting Picture Settings26
●● Viewing the Contact Samsung94
●● Changing the Picture Options33
●● Changing the Preset Sound Mode42
●● Adjusting Sound Settings43
●● Executing initial setup50
Preference Features
●● Setting the Time51
●● Using the Sleep Timer53
●● Setting the On / Off Timer54
●● Economical Solutions59
●● Other Features61
●● Using the Source List66
Other Information
●● Anti-theft Kensington Lock95
❑❑ Using the INFO button
The TV identifies the current channel and the status of certain audio-video
settings.
NN When you press the INFO button, a channel information banner will appear
on the top of the screen. And then press the E button, you can see the
details of the programme. (Digital channels only)
●● Scroll ◄,► to view information for a desired programme while watching
the current channel.
●● Scroll ▲,▼ to view information for other channels. If you want to move to
the currently selected channel, press the E button.
English
▶
❑❑ Memorizing Channels
■■ Aerial (Air/Cable)
OO MENUm → Broadcasting → Aerial → E
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
◀
▶
English
■■ Auto Tuning
OO MENUm → Broadcasting → Auto Tuning → E
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●● Auto Tuning
Aerial (Air/Cable): Select the aerial source to memorise.
◀
NN When selecting Air, scans for a channel automatically and stores in the
TV.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
English
▶
When selecting Cable:
It scans for a channel automatically and stores in the TV.
◀
▶
English
❑❑ Using the Channel menu
OO MENUm → Broadcasting → Channel List → E
■■ Channel List
◀
The Channel List contains the channels your TV displays when you press the
channel button. You can view channel information, All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
Press ► (Mode) button to change the channel mode, or press ◄ (Sorting)
button to change the channel order according to channel number or name on the
list.
NN When you press the CH LIST button on the remote control, Channel List
screen will be displayed at once. The option menu items that appear may
differ depending on the channel status and type.
Channel Sorting
●● Number / Name: Arranges the channel order according to channel number or
name on the list.
English
▶
Channel Mode
●● Aerial: Switches to Air or Cable.
●● Edit Favourites: Set channels you watch frequently as favourites.
NN For detailed information about using Edit Favourites, refer to “Edit
Favourites”.
●● Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
◀
Each group has a separate screen.
NN The TV displays Favourites 1-5 only if you have added favourites using
Edit Favourites.
●●
●●
●●
●●
All: Shows all currently available channels.
TV: Shows all currently available TV channels.
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP (Multimedia Home Platform) or
other channels.
●● Analogue: Shows all currently available analogue channels.
English
▶
■■ Guide
OO MENUm → Broadcasting → Guide → E
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
NN You must set the current time first using the System → Time → Clock
◀
function in the System menu to use this function.
●● a Red (Quick Nav): Viewing the TV programmes on the list quickly using
▲/▼/◄/► buttons. (Only for digital TV)
●● b Green (Channel Category): Select the type of channels you want to
display.
●● { Yellow (Schedule Manager): Moves to the reserved programmes in
Schedule Manager.
English
▶
■■ Schedule Manager
OO MENUm → Broadcasting → Schedule Manager → E
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
NN You must set the current time first using the System → Time → Clock
function in the System menu to use this function.
1. Select the Schedule on the Schedule Manager screen. You can use
Schedule Viewing.
◀
2. Press the ▲/▼/◄/► buttons to set each option menu.
●● Aerial: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The (c) mark indicates the day you’ve selected.
●● Date: You can set the desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
NN If you want to edit or cancel a reserved schedule, select the reserved
◀
schedule on Schedule Manager. Then press the E button and select the
Edit or Delete.
English
▶
■■ Edit Channel
OO MENUm → Broadcasting → Edit Channel → E
You can edit or delete channels.
1. Go to Edit Channel screen.
2. Press the ▲/▼ buttons to select the desired channel, then press the E
button. The (c) mark indicates the channel you’ve selected.
NN You can select more than one channel.
◀
NN Press the E again to deselect the channel.
English
▶
NN Using the coloured and function buttons with the Edit Channel.
●● a Red (Change Number): Changes channel order on the channel list. /
Completes changing the channel order.
●● b Green (Delete): Deletes a channel from the channel list.
●● { Yellow (Lock / Unlock): Lock a channel so that the channel cannot be
selected and viewed. / Unlock the channel that you locked.
NN This function is available only when the Channel Lock is set to On.
NN The PIN input screen appears. Enter your 4-digit PIN(The default pin is
◀
0-0-0-0.). Change the PIN using the System → Change PIN option.
English
▶
●● } Blue (Select All / Deselect All): Selects or deselects all channels at
once.
●● Ÿ (Go To): Goes to channel directly by pressing numbers (0~9) and the
E button.
●● k (Page): Moves to previous or next page.
●● T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
◀
▶
English
–– Sorting (only for digital channels): Changes the list ordered by channel
number or channel name.
–– Aerial: Selects the desired broadcasting signal.
–– Category: Changes the channel mode to All, TV, Radio, Data/Other,
Analogue, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–– Edit Favourites: Goes to Edit Favourites Screen directly.
–– Rename channels (Analogue channels only): Assign a name of up to
◀
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
–– Channel Info: Display details of the selected channel.
–– Information: Display details of the selected programme.
English
▶
■■ Edit Favourites t
OO MENUm → Broadcasting → Edit Favourites → E
You can add, edit or delete favourite channels.
1. Go to Edit Favourites screen.
2. Press the ▲/▼ buttons to select the desired channel, and then press E
button.
◀
3. Choose a specific favourite list among Favourites 1-5 using b (Change
favourites) button, and then press the } (Add) button. The selected channel
has been added in Favourites 1-5.
NN One favourite channel can be added in several of favourites among
Favourites 1-5.
English
▶
NN Using the coloured and function buttons with the Edit Favourites.
●● a Red (Category)
–– Category: Changes the channel mode to All, TV, Radio, Analogue,
Data/Other, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–– Change order: Changes the favourite channel order.
●● b Green (Change Fav.): Changes favourite list among Favourites 1-5.
●● { Yellow (Select All / Deselect All): Selects or deselects all channels at
◀
once.
●● } Blue (Add / Delete)
–– Add : Adds selescted channels to Favourites 1-5.
–– Delete : Deletes the favoruite channel from Favourites 1-5.
●● Ÿ (Go To): Goes to channel directly by pressing numbers (0~9).
●● k (Page): Move to previous or next page.
English
▶
●● T (Tools): Displays the option menu among Favourites1-5. The option
menu items that appear may differ depending on the channel status and
type.
–– Sorting (only for digital channels ): Changes the list ordered by
channel number or channel name.
–– Copy to Favourites: Edit the selected favourite channel in Favourites
1-5.
◀
––
––
––
––
Aerial: Selects the desired broadcasting signal.
Rename Favourites: Assign your own favourite channel name.
Edit Channel: Goes to Edit Channel screen directly.
Information: Displays details of the selected programme.
English
▶
❑❑ Locking Programme
■■ Channel Lock
OO MENUm → Broadcasting → Channel Lock → E
Enter your 4-digit PIN, the default of which is "0-0-0-0". Change the PIN using the
Change PIN option.
Lock channels in Edit Channel menu to prevent unauthorized users, such as
children, from watching unsuitable programme.
◀
NN Available only when the Source is set to TV.
NN If set Channel Lock off, it's neccessary to input PIN again.
English
▶
❑❑ Other Features
■■ Channel Settings
OO MENUm → Broadcasting → Channel Settings → E
●● Manual Tuning
Scans for a channel manually and stores in the TV.
◀
NN If a channel is locked, the PIN input window appears.
NN According to the channel source, Manual Tuning may be supported.
●● Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the New button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
–– When selecting Aerial → Air: Channel, Frequency
English
▶
●● Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme, Colour
System, Sound System, Channel, Search.
●● Fine Tune
(Analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
NN Fine tuned channels are marked with an asterisk “*”.
NN To reset the fine-tuning, select Reset.
◀
▶
English
■■ Subtitle t
OO MENUm → Broadcasting → Subtitle → E
Use this menu to set the Subtitle mode.
●● Subtitle: Switches subtitles on or off.
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing
◀
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
NN English is the default in cases where the selected language is unavailable
in the broadcast.
●● Primary Subtitle: Sets the primary subtitle.
●● Secondary Subtitle: Sets the secondary subtitle.
English
▶
■■ Audio Options
(Digital channels only)
OO MENUm → Broadcasting → Audio Options → E
●● Audio Language
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
◀
NN The available language may differ depending on the broadcast.
●● Audio Format
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV speaker
function.
NN Audio Format option may differ depending on the broadcast. DTS
Premium Audio 5.1 sound is only available when connecting an external
speaker through an optical cable.
English
▶
●● Audio Description
This function handles the audio stream for the AD (Audio Description) which is
sent along with the main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
◀
▶
English
■■ Digital Text (Disable / Enable)
◀
(Depending on the model)
(This function may not support depending on the region.)
If the programme broadcasts with digital text, this feature is enabled.
MHEG (Multimedia and Hypermedia Information Coding Experts Group): An
International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
datalinking hypermedia such as still images, character service, animation, graphic
and video files as well as multimedia data. MHEG is user runtime interaction
technology and is being applied to various fields including Video-On-Demand
(VOD), Interactive TV (ITV), Electronic Commerce (EC), tele-education, teleconferencing, digital libraries and network games.
English
▶
■■ Guide Type
OO MENUm → Broadcasting → Guide Type → E
Select to use either the built-in or downloaded guide.
●● Guide: Set the built-in guide to be displayed when the GUIDE button on the
remote control is pressed.
●● Auto: Set the TV to select the proper guide automatically when the GUIDE
button on the remote control is pressed.
◀
▶
English
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → E
■■ Picture Mode t
Select your preferred picture type.
◀
●●
●●
●●
●●
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
■■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/
R)
Your television has several setting options for picture quality control.
NN NOTE
●● In analogue TV, AV modes of the PAL system, the Tint (G/R) function is
◀
not available.
●● When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness, Sharpness.
●● Settings can be adjusted and stored for each external device connected
to the TV.
●● Lowering picture brightness reduces power consumption.
English
▶
■■ Screen Adjustment
OO MENUm → Picture → Picture Size → E
Set the various picture options such as picture size and aspect ratio.
NN The available items may differ depending on the selected mode.
NN Depending on the input source, the picture size options may vary.
●● Picture Size t: Your cable box/satellite receiver may have its own set
◀
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using ▲, ▼ buttons.
English
▶
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using ▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
◀
▶
English
NN NOTE
●● The picture size can vary depending on the input resolution when content is
played using Videos under Media Play.
●● Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
●● Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
◀
▶
English
NN NOTE
●● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Select the Position. Press the E button.
2. Press the ▲/▼/◄/► button to move the picture.
●● If you want to reset the position you adjusted, select Reset in the Zoom/
Position or Position screen, the picture will be set to its default position.
●● If you use the Screen Fit function,1 line may be cut at the top and bottom.
◀
▶
English
■■ PIP
OO MENUm → Picture → PIP → E
You can watch the TV and one external video source simultaneously. For
example, if you have a cable box connected to the Cable connector, you can use
PIP to watch programs from the cable box and watch a movie from a Blu-ray
player attached to the HDMI connector. PIP does not function in the same mode.
NN NOTE
◀
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP settings
◀
●●
●●
●●
●●
●●
●●
Main picture
Sub picture
Component, HDMI1
HDMI2/DVI
TV
PIP: Activate or deactivate the PIP function.
Aerial: Select either Air or Cable as the input source for the sub-screen.
Channel: Select the channel for the sub-screen.
Size (ä / ã): Select a size for the sub-picture.
Position (ã / – / — / œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main /
Sub) in PIP mode.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
(Depending on the model)
OO MENUm → Picture → Advanced Settings → E
(Available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
◀
NN When connecting a PC, you can only make changes to the White Balance
and Gamma.
●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust
the screen depth.
●● Flesh Tone: Emphasize pink flesh tone.
English
▶
●● RGB Only Mode (Off / Red / Green / Blue): Displays the red, green and blue
colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native): Adjust the range of colours available to create
the image.
Only in custom mode, you can set up the Colour options.
●● White Balance: Adjust the colour temperature for a more natural picture.
2 Point: Adjust the colour temperature for a more natural picture.
◀
R-Offset / G-Offset / B-Offset: Adjust each colour’s(red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
English
▶
●● Gamma: Adjust the primary colour intensity.
●● Motion Lighting: Reduce power consumption by brightness control adapted
motion.
NN Only available in Standard mode.
NN When changing a setting value of Backlight, Brightness or Contrast,
Motion Lighting will not work.
◀
▶
English
■■ Picture Options
OO MENUm → Picture → Picture Options → E
NN When connecting a PC, you can only make changes to the Colour Tone.
●● Colour Tone
NN Warm1 or Warm2 will be deactivated when the picture mode is
◀
Dynamic.
NN Settings can be adjusted and stored for each external device connected
to an input on the TV.
English
▶
●● Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
NN When the signal is weak, try other options until the best picture is
displayed. Choose one option among Off / Low / Medium / High / Auto
/ Auto Visualisation
●● MPEG Noise Filter: Reduces MPEG noise to provide improved picture
◀
quality.
NN Change its option to Off / Low / Medium / High / Auto in MPEG Noise
Filter.
English
▶
●● HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for optimum
quality.
NN Available in TV mode, AV, Component (480i / 1080i) and HDMI (1080i).
NN If the screen does not seem natural, change its option to Off / Auto1 /
◀
Auto2 in Film Mode.
▶
English
●● Analogue Clean View: Reduce diagonal noise in the picture, caused by the
crosstalk of signal.
●● LED Clear Motion: Removes drag from fast scenes with a lot of movement
to provide a clear picture.
NN The screen may become slightly darker when you play LED Clear
Motion.
◀
▶
English
■■ Picture Off
OO MENUm → Picture → Picture Off → E
The screen is turned off but the sound remains on. Press any button except the
volume button and power button to turn on the screen.
◀
▶
English
■■ Reset Picture
OO MENUm → Picture → Reset Picture → E
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Changing the Preset Sound Mode
■■ Sound Mode
OO MENUm → Sound → Sound Mode → E
◀
●●
●●
●●
●●
●●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
●● Stadium: Select Football Mode / Soccer Mode first, and will auto enter
Stadium mode.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
English
▶
❑❑ Adjusting Sound Settings
■■ Sound Effect
(Standard sound mode only)
OO MENUm → Sound → Sound Effect → E
●● DTS TruSurround
◀
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
●● DTS TruDialog
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialogue can be heard more clearly.
English
▶
●● Equaliser
Use Equaliser to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equaliser to its default settings.
NN If Speaker Select is set to External Speaker, Sound Effect is disabled.
◀
▶
English
■■ Speaker Settings
OO MENUm → Sound → Speaker Settings → E
●● Speaker Select t
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and
◀
MUTE buttons will not operate and the sound settings will be limited.
NN When Speaker Select is set to External Speaker.
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: Off
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV, set
Auto Volume to Off on the TV. Otherwise, a change to the volume contro of
the source device may not be applied.
◀
▶
English
■■ Additional Settings
OO MENUm → Sound → Additional Settings → E
●● DTV Audio Level
◀
: MPEG / HE-AAC This function allows
you to reduce the disparity of a voice signal (Which is one of the signals
received during a digital TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
digital channels only
English
▶
●● Digital Audio Out: Digital Audio out is used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD
player.
Audio Format: You can select the Digital Audio output format. The available
Digital Audio output format may differ depending on the input source.
NN By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
◀
interactive 3D sound experience.
Audio Delay: Correct audio-video sync programmes, when watching TV or
video, and when listening to digital audio output using an external device such
as an AV receiver (0ms ~ 250ms).
English
▶
●● Dolby Digital Comp(Digital channel only): This function minimizes signal
disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio,
HE-AAC, ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
◀
▶
■■ Reset Sound
OO MENUm → Sound → Reset Sound → E
Reset all sound settings to the factory defaults.
English
❑❑ Executing initial setup
■■ Setup
OO MENUm → System → Setup → E
Configure the channels and the time when setting up the TV for the first time or
when resetting the unit.
◀
NN Execute the initial setup following instructions that the TV guides.
NN The default PIN is: 0000.
English
▶
❑❑ Setting the Time
■■ Time
OO MENUm → System → Time → E
The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
◀
Clock Mode: Set up the current time manually or automatically.
–– Auto: Set the current time automatically using the time from a digital
channel.
NN The aerial must be connected in order to set the time automatically.
English
▶
–– Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Date and Time.
NN Available only when Clock Set is set to Manual.
NN You can set the Date and Time directly by pressing the number buttons
on the remote control.
◀
▶
English
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → E
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN Use the ▲/▼ buttons to select a period of time, and then press the E
button. To cancel the Sleep Timer, select Off.
◀
▶
English
❑❑ Setting the On / Off Timer
OO MENUm → System → Time → On Timer or Off Timer → E
●● On Timer: You can set up three separate On Timer configurations. (On Timer
1, On Timer 2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
◀
NN The c mark indicates the day you’ve selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
English
▶
Source: To select the source of the content that will play when the TV turns
on. You can:
–– Select TV and have the TV display a specific air channel.
–– Select USB and have the TV play back photo or audio files from a USB
device.
–– Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.)
◀
that you have connected a set-top box to, and have the TV display a
channel from the set-top box.
NN The USB device must be connected to your TV before you can select
USB.
English
▶
NN If you select a source other than TV or USB, you must:
●● Have a cable or satellite set-top box attached to that source.
●● Set the set-top box to the channel you want to watch when the TV
◀
goes on.
●● Leave the set-top box turned on.
NN When you select a source other than TV the Aerial and Channel options
will disappear.
Aerial (When the Source is set to TV): Select Air,DTV Air, Cable or DTV
Cable.
Channel (When the Source is set to TV): Select the desired channel.
English
▶
Music / Photo (When the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
–– If there is no music file on the USB device or the folder containing a music
file is not selected, the timer function does not operate correctly.
–– When there is only one photo file in the USB device, the slide show will not
play.
◀
–– If a folder name is too long, the folder cannot be selected.
–– Each USB you use is assigned its own folder. When using more than one
of the same type of USB, make sure the folders assigned to each USB
have different names.
English
▶
–– It is recommended that you use a USB memory stick and a multi card
reader when using On Timer.
–– The On Timer function may not work with USB devices with a built-in
battery, MP3 players, or PMPs made by some manufacturers because
these devices take a long time to be recognized.
●● Off Timer: You can set up three separate Off Timer configurations. (Off Timer
◀
1, Off Timer 2, Off Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
NN The c mark indicates the day you’ve selected.
Time: Set the hour and minute.
English
▶
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → E
●● Energy Saving(Off / Low / Medium / High): This adjusts the brightness of
the TV in order to reduce power consumption.
◀
▶
English
●● No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary
energy consumption, set how long you want the TV to remain on if it’s not
receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): If the Auto Power Off is On, the TV will be
automatically turned off when no user operation is received for 4 hours.
◀
▶
English
❑❑ Other Features
■■ Menu Language
(This menu name is different depending on the model)
OO MENUm → System → Menu Language → E
Set the menu language.
◀
▶
English
■■ Change PIN
OO MENUm → System → Change PIN → E
Change your password required to set up the TV.
NN The PIN input screen appears before the set up screen.
NN Enter your 4-digit PIN (The default Pin is 0-0-0-0). Change the PIN using the
Change PIN option.
■■ Auto Protection Time
◀
OO MENUm → System → Auto Protection Time → E
If the screen remains idle with a still image for a certain period of time defined by
the user, the screen saver is activated to prevent the formation of ghost images
on the screen.
English
▶
■■ General
OO MENUm → System → General → E
●● Game Mode: When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience by selecting game
mode.
NN NOTE
◀
●● Precautions and limitations for game mode.
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
–– If you display the TV menu in Game Mode, the screen shakes
slightly.
English
▶
●● Game Mode is not available in TV mode.
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to
Movie.
●● Panel Lock: Lock or unlock all the keys on the TV. When Panel lock is on,
◀
none of the keys on the panel will work.
●● Boot Logo: Display Samsung logo when the TV is turned on.
English
▶
■■ DivX® Video On Demand
OO MENUm → System → DivX® Video On Demand → E
Shows the registration code authorized for the TV. If you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file.
Once you play it using Videos, the registration is completed.
NN For more information on DivX® VOD, visit http://vod.divx.com.
◀
▶
English
❑❑ Using the Source List
■■ Source List
OO MENUm → Applications → Source List → E
NN When you press the s button, Source screen will be displayed at once.
NN You can only choose external devices that are connected to the TV. In
Source, connected inputs are highlighted.
◀
▶
English
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.
3. When USB is connected to the TV, popup window appears. You can select
the Photos, Videos or Music directly.
◀
▶
English
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using Media Contents
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports NTFS (Read Only), FAT16 and FAT32.
●● Certain types of USB Digital camera and audio devices may not be
◀
compatible with this TV.
●● Media Play only supports sequential jpeg format.
●● Media Play only supports USB Mass Storage Class (MSC) devices. MSC
is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers (USB HUB are not supported).
Devices should be connected directly to the TV’s USB port.
English
▶
●● Before connecting your device to the TV, please back up your files to
●●
●●
●●
◀
●●
●●
●●
prevent them from damage or loss of data. SAMSUNG is not responsible
for any data file damage or data loss.
The HDD (Hard Disk Drive) connected to USB is not supported.
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on
the screen.
The maximum supported JPEG resolution is 15360 x 8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format”
message is displayed.
The scene search and thumbnail functions are not supported in the
Videos.
English
▶
●● MP3 files with DRM that have been downloaded from a non-free site can
◀
not be played. Digital Rights Management (DRM) is a technology that
supports the creation, distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights
and interests of the content providers, the prevention of the illegal copying
of contents, as well as managing billings and settlements.
●● A USB device that requires high power (more than 500mA or 5V) may not
be supported.
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be
released automatically when connected to the TV.
English
▶
●● If a USB extension cable is used, the USB device may not be recognized
◀
or the files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted or a file in the list is not played, connect the USB
device to the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when Media Contents is run, use
the “Empty the Recycle Bin” function on the PC to permanently delete the
file.
●● If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
Disconnecting a USB Device
1. Press the s button.
2. Select a desired USB device, and then press the TOOLST button. The
Tools menu appears.
3.Select Disconnect USB Device, and then wait until the selected USB device
is disconnected. You can remove a USB device from the TV.
NN To remove a USB device from the TV, we recommend use Disconnect USB
Device function.
◀
▶
English
❑❑ Using the Media Play
OO MENUm → Applications → Media Play → E
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC)
device.
1. Press the MEDIA.P button.
2.Press ◄/► button to select desired menu (Photos, Videos, Music), then
press the E button.
◀
3.Press ◄/► button to select desired device, then press the E button again.
4. Press the ▲/▼/◄/► button to select the desired file in the list, then press
the E button or ∂ (Play) button.
English
▶
Playing the selected files
1. Press the ▲ button to select Options at the top of each main screen and
select Play Selected.
2. Select the desired files.
NN The check box appears to the left of the selected files.
NN Press E button again to deselect the file.
3. Press the ► button to select Play.
◀
NN You can select or deselect all files pressing the Select All / Deselect All.
English
▶
❑❑ Playing the Photos / Videos / Music
During playing a file, press the ▲/▼/◄/► button to select the desired menu.
NN When the option menu is not displayed, press the T button or E button.
NN You can also use ∂/∑/∫/π/μ buttons on the remote control during
playback.
NN If you press the INFO button during playback, you can view the playback
information.
◀
▶
English
Playback menu
Button
Operation
Photos
Videos
Music
/
Previous / Next
●
Start Slide Show / Stop Slide Show
●
Play / Pause
●
●
/
Previous / Next
●
●
/
Rewind / Fast Forward
●
●
/
◀
* When setting the Background Music to Mini Player in Photos, these buttons appear.
English
▶
Setting menu
●● Photos
Button
◀
Operation
Slide Show Settings
You can set the Speed and Effects during the slide show.
Zoom
You Can Zoom the image.
Rotate
You can rotate images in full screen mode.
Background Music
You can set background music when watching a slide show.
Settings
Picture Mode / Sound Mode : You can adjust the picture.
Information: You can see detailed information about the played
file.
English
▶
NN During the slide show, all files in the file list will be displayed in order.
NN When you press the ∂ (Play) button (or ▲ button → Options → Slide
Show) in the file list, slide show will be started immediately.
NN During the slide show, you can adjust the slide show speed using π (REW)
or µ (FF) button.
●● Supported Photo Formats
NN For the details, refer to “Specifications” in user manual.
◀
▶
English
●● Videos
Button
Operation
Search
Search Titles: You can move the other file directly.
Search Time Bar: You can search the video using ◄ and ► button
at one minute interval or entering the number directly.
NN It may not be supported depending on the input source.
◀
Repeat Mode
You can play movie files repeatedly.
Picture Size
You can adjust the picture size to your preference.
Settings
Subtitle Settings: You can play the video with subtitles. This function
only works if the subtitles are the same file name as the video.
Picture Mode / Sound Mode: You can adjust the picture or sound
setting.
Audio Language: You can change the audio language if the video
has more than one language.
Information: You can see detailed information about the played file.
English
▶
NN If video time information is unknown, play time and progress bar are not
displayed.
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the game itself.
●● Supported Subtitle / Video Formats
NN For the details, refer to “Specifications” in user manual.
◀
▶
English
●● Music
Button
Operation
Repeat
You can play music files repeatedly.
Shuffle
You can play the music randomly.
Sound Mode
You can adjust the sound setting.
NN Only displays the files with supported music file extension. Other file
extensions are not displayed, even if they are saved on the same USB device.
◀
NN If the sound is abnormal when playing music files, adjust the Equaliser in the ▶
Sound menu. (An over-modulated music file may cause a sound problem.)
●● Supported Music Formats
NN For the details, refer to “Specifications” in user manual.
English
Setting the Encoding language
Set the encoding language if the text is not supported.
1. Press the ▲ button to select Options at the top of music main screen and
select Encoding.
2. Select the desired encoding language.
◀
▶
English
❑❑ Using the Football Mode
■■ Football Mode t
OO MENUm → Applications → Football Mode → E
The name may differ depending on the region. This mode provides optimized
condition for watching sports games.
●● a (Zoom): Pause playback and divide the picture into 9 parts. Select a part
to zoom it in. Press this button again to resume.
◀
NN When the Football Mode is On, the picture and sound modes are set to
Stadium automatically.
NN If you turn the TV off while watching Football Mode, the Football Mode will
be disable.
NN When the Data Service is running, the Zoom is not available.
English
▶
❑❑ Using the Screen&Sound Capture function
■■ Screen&Sound Capture
OO MENUm → Applications → Screen&Sound Capture → E
This function provides capture screen or record an audio from the TV screen
being viewing. Additionally, you can save the capture image and record audio
on the USB device connected the TV. This function provides the TV screen you
watched capture image and record audio.
◀
●● Screen&Sound Capture
Turn the Screen&Sound Capture function on or off.
●● Default Recording Device
You can set the default device for saving captured image files and recorded
audio files.
English
▶
●● Screen Capture
1. To capture the screen while watching TV, press {. This captures the
screen.
NN It may take 2 to 3 seconds to capture the screen.
2. Once captured, the image is saved as a .jpg file to the USB device
connected to the TV. Thumbnails of captured images are then displayed
on the screen.
NN Select the thumbnail screen to view the saved images on Media Play.
◀
▶
English
●● Sound Recording
1.Press }. This records audio in real-time.
NN A popup window will appear on the screen while recording is in
progress.
NN The popup window displays the duration of the recording.
2. To stop recording, press ∫. The recording is stored as a .wav file on the
USB device connected to the TV. Thumbnails of the audio recordings are
then shown on the screen.
◀
NN Select the thumbnail screen to play the saved audio files on Media
Play.
NN You cannot change the channel or source to an external device. To
change the channel or the source to an external device, first stop
recording audio.
English
▶
❑❑ Viewing the e-Manual
■■ e-Manual
OO MENUm → Support → e-Manual → E
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual screen, refer to “How to use the
e-Manual” in user manual.
◀
▶
English
❑❑ Using the Self Diagnosis
■■ Self Diagnosis
OO MENUm → Support → Self Diagnosis → E
NN Self Diagnosis might take few seconds, this is part of the normal operation
of the TV.
◀
●● Picture Test: Use to check for picture programmes.
●● Sound Test: Use the built-in melody sound to check for sound programmes.
NN If you hear no sound from the TV’s speakers, before performing the
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu.
NN The melody will be heard during the test even if the sound is muted by
pressing the MUTEM button.
English
▶
●● Signal Information (Digital channels only): HDTV channel’s reception quality
is either perfect or the channels are unavailable. Adjust your aerial to increase
signal strength.
●● Reset: Reset all settings to the factory defaults except network settings.
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
NN The default PIN is 0-0-0-0
◀
▶
English
❑❑ Updating the Software
■■ Software Update
(Depending on the model)
OO MENUm → Support → Software Update → E
The Software Update menu lets you upgrade your TV’s software to the latest
version.
Current Version: This is the software version already installed in the TV.
◀
NN When software is upgraded, video and audio settings you have made will
return to their default settings. We advise you to write down your settings so
that you can easily reset them after the upgrade.
English
▶
●● Update now
–– By USB: Insert a USB drive containing the firmware upgrade file,
downloaded from “www.samsung.com” into the TV.
NN Please be careful not to disconnect the power or remove the USB
drive until uprades are complete. The TV will be turned off and on
automatically after completing the firmware upgrade.
–– By Channel: Upgrade the software using the broadcasting signal.
NN If the function is selected during the software transmission period,
◀
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the
signal status.
English
▶
●● Auto update
A manual upgrade will be automatically performed at selected time. Since the
power of the unit is turned on internally, the screen may be turned on slightly
for the product. This phenomenon may continue for more than 1 hour until the
software upgrade is complete.
On: When auto update is on, update will be automatically performed.
Off: When auto update is off, update cannot be automatically performed.
◀
▶
English
❑❑ Changing the Use Mode
■■ Use Mode
OO MENUm → Support → Use Mode → E
Select the Use Mode suitable for your place. We strongly recommend you select
Home Use.
◀
●● Home Use: Home Use is the default setting.
●● Store Demo: Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the picture settings will be reset
every 5 minutes.
English
▶
❑❑ Viewing the Contact Samsung
■■ Contact Samsung
OO MENUm → Support → Contact Samsung → E
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
◀
▶
English
❑❑ Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer
to the manual provided with the Kensington Lock for additional information on
proper use.
NN Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K”
icon.
◀
NN The position and colour may differ depending on the model.
English
▶
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around
a large, stationary object such as desk or
chair.
<TV Rear>
2. Slide the end of the cable with the lock
attached through the looped end of the
Kensington lock cable.
◀
<Optional>
3. Insert the locking device into the
Kensington slot on the product.
4. Lock the lock.
NN These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
NN The locking device has to be purchased separately.
English
Download PDF