Samsung | BD-F5100 | Samsung Blu-ray 藍光影碟播放機 BD-F5100 User Manual

BD-F5100
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that presents
a risk of electric shock or personal injury.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Do not install this equipment in a confined
space such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
Blu-ray Disc Player USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF
DIRECTED. BE SURE TO OPERATE Blu-ray
Disc Player CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
2
This symbol indicates important
instructions accompanying the product.
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face
of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement
fuse cover is required, it must be of the same
color as the pin face of the plug. Replacement
covers are available from your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
CLASS 1 LASER product
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM (IEC 60825-1)
• THIS product UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND
DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches
on a disc may reduce
sound and picture quality
or cause skipping
-- Avoid touching the surface of a disc
where data has been recorded.
-- Hold the disc by the edges so that
fingerprints will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water
and wipe with a soft cloth.
-- When cleaning, wipe gently
from the inside to the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and
store vertically.
Handling Cautions
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
• Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
• Maintenance of Cabinet.
-- Before connecting other components to
this player, be sure to turn them off.
-- If you move your player suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and
lens and cause abnormal disc playback. If
this occurs, unplug the player, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
• If the product makes an abnormal noise
or produces a burning smell or smoke,
turn off the power switch immediately and
disconnect the power plug from the wall
outlet. Then, contact the nearest customer
service centre for technical assistance. Do
not use the product. Using the product as
it is may cause a fire or an electric shock.
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
Contents
Safety Information
Language Settings...................................... 13
Precautions.................................................. 2
General Settings......................................... 13
Warning........................................................ 2
Disc Storage & Management........................ 3
Security Settings........................................ 13
Support Settings........................................ 13
Handling Cautions........................................ 3
Media Play
Getting Started
Playing Files on a USB Device.................... 14
Copyright..................................................... 3
Before using the User Manual....................... 4
Logos of Discs the player can play............... 4
Accessories.................................................. 6
Front Panel................................................... 6
Rear Panel.................................................... 6
Remote Control............................................ 7
Connections
Connecting to a TV....................................... 7
Connecting to an Audio System................... 8
Connecting to a Network Router.................. 8
Playing a Commercially Recorded Disc....... 14
Playing a Disc with User Recorded
Content...................................................... 15
Playing Content Located in Your PC........... 15
Controlling Video Playback......................... 15
Controlling Music Playback......................... 16
Playing Photo Contents.............................. 17
Appendix
Troubleshooting.......................................... 17
Specifications............................................. 19
Settings
The Initial Settings Procedure....................... 9
Menu Navigation........................................... 9
Accessing the Settings Menu....................... 9
Display Settings............................................ 9
Audio Settings............................................ 10
Network Settings........................................ 11
System Settings......................................... 12
3
Getting Started
Region Code
Before using the User Manual
Disc Types and Contents your player can play
Media
VIDEO
MUSIC
PHOTO
✎✎ NOTES
Disc Type
Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV or MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Number for this player is
displayed on the rear panel of the player.
Disc
Type
Blu-ray
Disc
``
``
``
``
Disc types your player cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
4
• DVD-RAM
• Super Audio CD
(except CD layer)
• 3.9 GB DVD-R for
• DVD-RW (VR
Authoring.
mode)
• CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
a
b
c
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
25 Mbps.
`` Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
`` When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Region
Code
DVDVIDEO
Logos of Discs the player can play
Blu-ray Disc
BD-LIVE
DivX
PAL broadcast System
in U.K., France,
Germany, etc.
Area
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
Supported File Formats
India, China, Russia, Central
and South Asia.
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• The player does not support folder or file
names longer than 128 characters.
• Some USB/External HDD/digital camera
devices may not be compatible with the player.
• Your player supports the FAT16, FAT32,
and NTFS file systems.
• Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
• The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
Notes on the USB connection
• Your player only supports video with a frame rate under 30fps (frames per second).
• Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with
this player.
• If some USB devices require excessive power, they may be limited by the circuit safety
device.
• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into
a wall socket.
If the problem continues, contact the USB HDD manufacturer.
• You must remove the USB storage device safely by performing the "Safely Remove USB"
function to prevent possible damage to the USB memory.
Press the HOME button to move to the home screen, press the YELLOW (C) button, and
then press the v button.
• SAMSUNG is not responsible for any data file damage or data loss.
• Your player does not support NTFS compressed files, sparse files, or encrypted files.
• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Video File Support
File Extension
*.avi
Container
AVI
Video Codec
DivX 3.11/4/5/6
MP4v3
H.264 BP/MP/HP
*.mkv
*.wmv
*.mp4
*.mpg
*.mpeg
MKV
WMV (wmv9)
MP4
PS
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
Audio Codec
MP3
Dolby Digital
DTS
WMA
PCM
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
•• Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
•• Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
•• Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
Music File Support
File Extension
*.mp3
*.wma
Container
MP3
Audio Codec
Support Range
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
MP3
WMA
-
Picture File Support
File Extension
*.jpg
*.jpeg
*.jpe
*.png
Type
Resolution
JPEG
15360x8640
PNG
15360x8640
1920x1080
5
AVCHD (Advanced Video Codec High Definition)
Front Panel
• This player can play back AVCHD format discs. These discs are normally recorded and used
in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that
use “x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
✎✎ NOTES
`` Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
`` “x.v.Color” offers a wider color range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories shown below.
✎✎ NOTES
AUDIO
BONUS
VIEW
HDMI Cable
6
Batteries for Remote
Control (AAA Size)
User Manual
HOME
REPEAT
A-B
REPEAT
SUBTITLE
FULL
SCREEN
DISC TRAY
REMOTE CONTROL SENSOR
USB HOST
`` When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and
then press the v button.
`` You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
Rear Panel
Remote Control
HDMI OUT
LAN
DIGITAL AUDIO OUT
Connections
Remote Control
Tour of the Remote Control
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to eject a disc.
Connecting to a TV
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Press numeric buttons to operate options.
Use to enter the popup menu/title menu.
Use to enter the disc menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
AUDIO
HOME
SUBTITLE
Press to use Tools menu.
Press to exit the menu.
Return to the previous menu.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
Press to use full screen function, during the bluray
disc/DVDs playback, this button does not operate.
Allows you to repeat a title, chapter, track or
disc.
Allows you to repeat A-B disc.
Installing batteries
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change menu
values.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use bonusview function.
Audio
Video
Press to move to the home menu.
✎✎ NOTES
!!
`` If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
CAUTION
`` Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
✎✎ NOTES
`` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out on the player to an audio system to hear audio.
`` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
`` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
`` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)
HDMI cable.
`` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
7
Connecting to an Audio System
Connecting to a Network Router
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
You can connect your player to your network router using one of the methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your network as shown
in the illustrations.
Wired Network
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder
Or
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Broadband modem
(with integrated router)
Broadband
service
Router
Broadband
modem
Method 1
Audio
8
Method 2
Audio
✎✎ NOTES
Broadband
service
`` Internet access to Samsung's software update server may not be allowed, depending on the router you use or your
ISP's policy. For more information, contact your ISP (Internet Service Provider).
`` DSL users, please use a router to make a network connection.
Settings
The Initial Settings Procedure
`` If you leave the player in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
• After the loading process of this product is
finished, the panel buttons and remote control
can be operated.
Menu Navigation
AUDIO
`` The Home menu will not appear if you do not
configure the initial settings except as noted below.
`` If you press the BLUE (D) button during
network setup, you can access the Home menu
even if the network setup is not completed yet.
`` When you return to the Home menu, the full
screen mode is cancelled automatically.
`` If you want to display the Initial Setting screen
again to make changes, press the @ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
`` After the initial settings process is complete.
you can operate the HDMI-CEC function.
`` If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
2
3
4
REPEAT
REPEAT
FULL
HOME Button : Press to move to the Home
menu.
VIEW
A-B
SCREEN
RETURN Button : Return to the previous menu.
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current menu.
• Home Menu
6
1
Videos
Photos
Music
Settings
2
5
4
App 1
No Disc
App 2
a Change Device
App 3
Selects Settings.
3
Displays the buttons you can use on the
remote to access functions.
4
Selects applications.
5
Selects Videos.
6
Selects Photos.
Accessing the Settings Menu
4
BONUS
1
2
`` The Videos, Photos, and Music options require
that you have an appropriate disc inserted into
the player or a USB flash device attached to
the player.
3
2
Selects Music.
✎✎ NOTES
SUBTITLE
1
The Initial Settings Procedure lets you set
the OSD and menu languages, configure the
connection to your home network, and choose
the aspect ratio output (screen size and format)
that is correct for your TV.
✎✎ NOTES
HOME
1
To access the Settings menu and sub-menus,
follow these steps:
1. Press the POWER button.
The Home Menu appears.
2. Press the ◄► buttons to select Settings,
and then press the v button.
3. Press the ▲▼ buttons to select the
desired submenu, and then press the
v button.
4. Press the ▲▼ buttons to select the desired
item, and then press the v button.
5. Press the EXIT button to exit the menu.
✎✎ NOTES
`` The access steps may differ depending on
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Display Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
✎✎ NOTES
`` Depending on the disc type, some aspect
ratios may not be available.
`` If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung player and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on
in both the player and TV, the player outputs video at the
video resolution and frame rate of the Blu-ray Disc/DVDs.
✎✎ NOTES
`` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
`` If the player is connected to a device that does not
support BD Wise, you can not use the BD Wise function.
`` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
576p/480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
App 4
d View Devices " Enter
3
9
Resolution according to the output mode
• Blu-ray Disc/E-contents/Digital Contents
playback
HDMI / connected
Output
HDMI Mode
Setup
Blu-ray Disc
BD Wise
Auto
1080@60F
(Movie Frame : Off)
Resolution of
Blu-ray Disc
E-contents/
Digital
contents
1080p
Max. Resolution Max. Resolution
of TV input
of TV input
1080@60F
1080@60F
Movie Frame :
Auto (24Fs)
1080@24F
1080@24F
720p
1080i
720p
1080i
1080i
576p/480p
• DVD playback
720p
576p/480p
576p/480p
Output
Setup
HDMI / connected
Auto
Max. Resolution of TV input
1080i
1080i
BD Wise
1080p
720p
576p/480p
10
HDMI Mode
576i/480i
1080p
720p
576p/480p
✎✎ NOTES
`` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message “If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?” appears. If you
select Yes, the TV’s screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
`` If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the @ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
`` When the factory default settings are restored,
all stored user BD data is deleted.
`` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player’s HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate. You
can select Movie Frame only when the player
is in the HDMI 1080p output resolution mode.
HDMI Color Format
Lets you set the colour space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HDMI Deep Color
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
Progressive Mode
Lets you improve picture quality when viewing DVDs.
Audio Settings
Digital Output
Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output Selection table.
Digital Output Selection
Setup
Connection
PCM
Audio Stream
on Blu-ray
Disc
Definition for
Blu-ray Disc
HDMI
Receiver
Coaxial
Up to 7.1ch PCM 2ch
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI Receiver
AV receiver or
or Coaxial
Coaxial
HDMI Receiver
Coaxial
PCM
PCM 2ch
Re-encoded DTS
Dolby Digital
PCM 2ch
PCM 2ch
Dolby Digital
Dolby Digital
Re-encoded DTS
Dolby Digital Plus
PCM 2ch
PCM 2ch
Dolby Digital
Plus
Dolby Digital
Re-encoded DTS
Dolby TrueHD
PCM 2ch
PCM 2ch
Dolby TrueHD
Dolby Digital
Re-encoded DTS
DTS
PCM 2ch
PCM 2ch
DTS
DTS
Re-encoded DTS
DTS-HD High
Resolution Audio
PCM 2ch
PCM 2ch
DTS-HD High
Resolution Audio
DTS
Re-encoded DTS
PCM 2ch
PCM 2ch
DTS
Re-encoded DTS
DTS-HD Master
Audio
Audio Stream
on DVD
Bitstream
(Unprocessed)
PCM
PCM
Dolby Digital
DTS
Any
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS-HD Master
Audio
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Decodes main
feature audio and
Outputs only main feature audio BONUSVIEW audio
Decodes main feature
stream so that your AV receiver stream together into
audio and BONUSVIEW
can decode the audio bitstream. PCM audio and add
audio stream together
Navigation Sound
You will not hear BONUSVIEW
into PCM audio and add
Effects, then reaudio and Navigation Sound
Navigation Sound Effects.
encodes the PCM
Effects.
audio into DTS
bitstream
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
DTS
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then reencodes the PCM
audio into Dolby
Digital bitstream
** If Source Stream is 2ch, "Re-encoded
Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack
of the main feature.
-- BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
-- Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different on
each Blu-ray Disc.
✎✎ NOTES
`` Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
`` If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
`` Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
`` Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`` If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
`` If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.
`` If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose only if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
True HD audio.
• Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
✎✎ NOTES
`` This unit can only be connected to a Network
via a wired connection.
Wired Network Settings
1. In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
2. Press the ▲▼ buttons to select Network,
and then press the v button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Settings
Wired Network Settings
Display
Audio Internet Protocol Setup
Network
System
Language
IP Address
Subnet Mask
Gateway
DNS
Security
General
Support
DNS Server
: Auto
: 0
0
0
0
: 0
0
0
0
: 0
: Auto
: 0
0
0
0
0
\
0
0
> Move " Select ' Return
4. In the Internet Protocol Setup field,
select Auto if it is not selected. (Press
v select Auto, and then press v.)
5. The Auto Function acquires and fills
in the values for IP Address, Subnet
Mask, etc., automatically.
✎✎ NOTES
`` This process can take up to five minutes.
6. After the Network Function has acquired
the network values, press the RETURN
button.
7. Select Network Test, and then press
v to ensure the player has connected
to your network.
8. When the Network Test is complete,
press the RETURN twice to return to
the Main Menu.
9. If the Network Function does not acquire
the network values, go to the directions
for Manual Setup.
Manual Network Setup
Before you start manual network setup, you
need the network setting values.
To enter the Network Settings into your
player, follow these steps:
1. In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
4. Select the Internet Protocol Setup field,
and then press the v button.
5. Press the ▲▼ buttons to select Manual,
and then press the v button.
6. Press the ▼ button to go to the first
entry field (IP Address).
7. Use the number buttons on your remote
to enter numbers.
8. When done with each field, use the ►
button to move to the next field. You
can also use the other arrow buttons to
move up, down, and back.
9. Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11
11. Press the ▼ button to go to the first DNS
entry field.
12. Enter the numbers as above.
13. Press the Return button on your remote.
14. Run a Network Test to ensure the player
has connected to your network.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
✎✎ NOTES
`` What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
`` The Internet connection may be restricted
while you are using BD-LIVE contents.
12
Using BD-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
1. Attach a USB memory stick to the USB
jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BDLIVE services.
2. Insert a Blu-ray Disc that supports BDLIVE.
3. Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
✎✎ NOTES
`` The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
The DLNA Function
DLNA lets you play music, video, and photo
files located in your PC or NAS on the player.
To use DLNA with your player, you must
connect the player to your network.
(See pages 11~12).
To use DLNA with your PC, you must install
DLNA software on your PC.
If you have NAS, you can use DLNA without
any additional software.
To download DLNA software
1. Go to Samsung.com
2. Click Support, enter your player’s
product number in the field that
appears, and then click Product.
3. On the next screen, click Get downloads
under Downloads.
4. Click Software on the next page.
5. Click the icon in the DLNA line under File
to start the download.
System Settings
Initial Settings
By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
`` If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
(
) button on the TV’s remote control.
For more information, please see the TV user
manual.
✎✎ NOTES
`` This function is not available if the HDMI cable
does not support CEC.
`` If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
`` Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
`` After the product was turned off, disconnecting
and connecting the power cable turns it on
automatically. At the moment, it automatically
turns off in about 15 seconds for reestablishing Anynet+ connection.
`` For some TV products, if connected to this
product with Anynet+ function, turning the
TV on may display a warning popup message
saying no connection was found. Still, Anynet+
connection is properly established and
available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device’s information
including the storage size, delete the BD data,
or change the Flash memory device.
✎✎ NOTES
`` In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
`` Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
`` The Resume Play function may not work after
you format the storage device.
`` The total memory available to BD Data
Management may differ, depending on the
conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you prefer for the
Home menu, disc menu, audio, and subtitles.
✎✎ NOTES
`` The selected language will only appear if it is
supported on the disc.
Security Settings
When you access this function for the first
time, the PIN setup screen appears. Enter a
desired 4-digit PIN using the number buttons.
(The default PIN is 0000.)
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set. For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
Change PIN
Change the 4-digit password used to access
security functions.
If you forget your password
1. Remove any discs.
2. Press and hold the @ button on the front
panel for 5 seconds or more.
All settings will revert to the factory settings.
✎✎ NOTES
`` When the factory default settings are restored,
all the user stored BD data will be deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
Support Settings
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By Online
To upgrade By Online, follow these steps:
1. Select By Online, and then press the
v button. The Connecting to Server
message appears.
2. A popup message will appear if an
update is available.
3.
4.
If you select Yes, download process
started. (Never turn the player on during
an upgrade.)
When the update is completed, the
player will restart automatically.
✎✎ NOTES
`` The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or back on manually
during the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
`` No disc should be in the product when you
upgrade the software by online.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎✎ NOTES
`` No disc should be in the product when you
upgrade the software using the USB Host jack.
`` When the software upgrade is done, check the
software details in the software Upgrade menu.
`` Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
`` Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
13
To set Auto Upgrade Notification on, follow
these steps:
1. Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup message.
1. To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player on
or off manually during an upgrade.)
2. The update progress popup appears.
3. When the update is complete, the player
turns off again automatically.
4. Press the POWER button to turn on the
player.
✎✎ NOTES
`` The update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or on manually during
the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer regarding
third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.
Media Play
Playing a Commercially Recorded
Disc
1. Press the 8 button to open the disc
tray.
3. Press the 8 button to close the disc
tray. Playback starts automatically.
Playing Files on a USB Device
You can play multimedia files located on a
USB storage device.
123
a
123
Settings
App 2
a Change Device
App 3
App 4
c Safely Remove USB d View Devices " Enter
4-1. If you pressed the BLUE (D) button, the
screen below appears. Go to Step 5-1.
123
2. In Stop mode, connect the USB storage
device to the USB port on the front
panel of the player.
The message “Do you want to access
the device?” is displayed.
4. If you have a disc in the Blu-ray player,
press the RED (A) or BLUE (D) button.
If you do not, go to Step 6.
If you pressed the RED (A) button, go to
Step 5.
If you pressed the BLUE (D) button, go
to Step 4-1.
Music
6. Press the ◄► buttons to select Videos,
Music, or Photos, and then press the
v button. Go to Step 7.
1. Move to the Home menu.
3. Press the ◄► button to select Yes, and
then press the v button.
Photos
No Disc
2. Place a disc gently into the disc tray with
the disc's label facing up.
5. Press the ▲▼ buttons to select USB,
and then press the v button.
14
Videos
App 1
123
a
App 2
Settings
App 3
App 4
d Home " Enter
5-1. Press the ◄► buttons to select USB,
then press the v button.
6-1. Press the ▲▼ buttons to select Videos,
Music or Photos, and then press the
v button.
7.
A screen appears listing the contents
of the device. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
8. If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
9. Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
✎✎ NOTES
`` Even though the player will display folders for
all content types, it will only display files of the
Content Type you selected in Step 6 or Step
6-1.
For example, if you selected music, you will
only be able to see music files. You can change
this selection by returning to the Home screen
and repeating Step 4.
10. Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the
disc tray with the disc’s label facing
up, and then close the tray. The Device
Connected pop-up appears.
2. Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
✎✎ NOTES
`` You must remove the USB storage device
safely by performing the “Safely Remove USB”
function in order to prevent possible damage
to the USB memory. Press the HOME button to
move to the Home menu, select the YELLOW
(C) button, and then press the v button.
`` If you insert a disc when playing a USB storage
device, the device mode changes to Blu-ray,
DVD or CD automatically.
3.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 2.
To play content located in your PC on your
Blu-ray disc player, you must connect the
Blu-ray player to you network and install DLNA
Software on your PC.
To Play Content From Your PC
1. Move to the Home menu
2.
3.
4.
5. Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Press the BLUE (D) button on your
remote (Device).
In the Device screen that appears, select
your PC, and then press the v button.
Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
4. If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
6.
Playing Content Located in Your
PC
5.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 4.
7. Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
8.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray disc, DVD, CD, USB
device, or you computer. Depending on the
media, some of the functions described in this
manual may not be available.
Buttons on the Remote Control used
for Video Playback
2
1
AUDIO
HOME
SUBTITLE
A screen appears listing the contents
on your PC. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
6. If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
15
Playback related buttons
The player does not play sound in Search,
Slow or Step mode.
• To return to normal speed playback, press
the 6 button.
6 button
Starts playback.
7 button
Pauses playback.
5 button
Stops playback.
Fast Motion
Play
During playback, press the 3 or
4 button.
Each time you press the 3 or
4 button, the playback speed
will change.
Slow Motion
Play
In pause mode, press the 4
button.
Each time you press the 4
button, the playback speed will
change.
Step Motion
Play
Skip Motion
Play
In pause mode, press the 7
button.
Each time you press the 7
button, a new frame appears.
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
Using the disc menu, title menu, popup menu, and title list
DISC MENU
button
TITLE MENU
button
POPUP MENU
button
During playback, press this button
to start the disc menu function.
During playback, press this button
to start the title menu function.
During playback, press this button
to start the popup menu function.
Controlling Music Playback
You can control the playback of music located
on a Blu-ray disc, DVD, CD, USB device, or
your computer.
Buttons on the Remote Control used
for Music Playback
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
the playlist.
3
5 button : Stops a track.
4
5
6
AUDIO
HOME
SUBTITLE
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
(
) Track
The current song is repeated.
(
) All
All songs are repeated.
(
)Shuffle
Shuffle plays songs in random
order.
1. To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
Music TRACK 001
Repeat an Audio CD (CD-DA)/MP3
Playlist
1/6
Tools
TRACK 001
Repeat Mode
? Off \05:57
TRACK
002
< Adjust " Select ' Return
+
00:08 / 05:57
CD
04:07
TRACK 004
03:41
TRACK 005
" Pause
03:17
Tools
03:35
' Return
2. Press the ◄► buttons to select Track,
All, Shuffle, or Off.
3. Press the v button.
TRACK 002
02:38
02:38
TRACK 003
TRACK 004
02:38
02:38
02:38
02:38
TRACK 006
TRACK 005
TRACK 008
TRACK 007
02:38
02:38
TRACK 010
TRACK 009
02:38
02:38
CD
c Select
( ) Jump Page ' Return
04:27
TRACK 006
1/2 Page
TRACK 001
1. During Playlist playback, press the
TOOLS button.
4
3
Songs are played in the order
in which they were recorded.
6 button : Plays the currently selected
track.
Pause : Pauses a track.
TRACK 003
5
6
Off
Playlist
TRACK 001
2
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
1
1
16
2
2. Press the ▲▼◄► buttons to move
to a desired track, and then press the
YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
3. To remove a track from the list, move to
the track, and then press the YELLOW
(C) button again.
The check on the track is cancelled.
4. When done, press the v button.
5.
6.
To change the play list, press the Return
button to return to the Music List.
Repeat Steps 2, 3, and 4.
To cancel the play list and return to the
Home screen, press the Return or Exit
button.
✎✎ NOTES
`` You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
`` If you remove all the tracks from a play list and
then press the v button, the player lists and
plays all the tracks on the disc.
✎✎ NOTES
`` Depending on the disc or storage device, the
Tools menu may differ.
`` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
`` You can't enlarge the subtitle and PG graphic
in the full screen mode.
Appendix
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 6.1m from the
player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• Press the P button (on front panel) for more than 5 seconds.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
Playing Photo Contents
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Using the Tools Menu
During playback, press the TOOLS button.
Start Slide
Show
Select to start the slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Background
Music
Information
Select to listen to music while
viewing a slide show.
Shows the picture information.
Troubleshooting
17
PROBLEM
The screen is blank.
Forgot password
SOLUTION
PROBLEM
• If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
Video is played intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is
overloaded.
DLNA connection between
Player and PC is unstable.
• The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don’t use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is
deleted.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI input
resolutions.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
• Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorised service centre.
DLNA function
I can see folders shared
through DLNA, but I cannot
see the files.
• DLNAs shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not
displayed.
BD-LIVE
SOLUTION
I cannot connect to the BDLIVE server.
• Check whether the network connection is working or not by using the
Network Status menu.
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
✎✎ NOTES
`` When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the
product.
2. You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
18
Specifications
General
USB
HDMI
Audio Output
Network
-----
Weight
1.0 Kg
Dimensions
269 (W) X 193 (D) X 39 (H) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Type A
USB 2.0
DC output
5V 0.5A Max.
Video
1080p, 1080i, 720p, 576p/480p
Audio
PCM, Bitstream
Digital Audio Output
Coaxial
Ethernet
100BASE - TX Terminal
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
For the power supply and power consumption, refer to the label attached to the player.
Weight and dimensions are approximate.
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
• Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Bluray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
19
• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibitet use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com.
To request additional information about Cinavia by email, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.
20
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorised by the content owner or
service provider. Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
Licence
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
• Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
2.0+Digital Out
Reserved.
• Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the
product menu.
• DivX
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
• DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
• Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
21
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Area
` Middle East
U.A.E
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
Senegal
Cameroon
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
Contact Centre 
Web Site
800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
BD-F5100
Blu-ray™ 光碟播放機
使用手冊
用影像記錄一切可能
感謝您選購此款 Samsung 產品。
為了獲得更完善的服務,
請在以下網站註冊您的產品
www.samsung.com/register
繁體中文
安全資訊
警告
為了降低觸電的危險,請勿取下前蓋 (或後蓋)。
本機內部沒有使用者可以自行維修的部件。 所有維修工作應由有資格的人員完成。
注意
注意: 為了降低觸電的危險,請
勿取下前蓋 (或後蓋)。 本機內
部沒有使用者可以自行維 修的
部件。 所有維修工作應由有 資
格的人員完成。
切勿將本裝置安裝在狹窄的空間中,例如書
架或類似的裝置中。
警告
三角形內的驚嘆號是一個警告符
號,警示您產品附帶重要說明。
使用屏蔽電纜和接頭將裝置連接至其他裝置
時,本產品符合 CE 規定。 為了防止收音機
和電視等電子裝置產生的電磁干擾,請使用
屏蔽的電纜和接頭進行連線。
為了防止火災或觸電造成的損害,請勿讓本
裝置受雨淋或置於潮濕的環境中。
重要附註
注意
本裝置的電源插頭配備含保險絲的壓模插頭。
保險絲的值在插頭的插腳面指示。
如果需要更換保險絲,必須使用額定值相同
的 經過 BS1362 核准的保險絲。
Blu-ray 光碟播放機使用肉眼看不到的鐳射
光線,如果被照射,則可能會導致有害輻
射。 請務必依照指示謹慎地操作 Blu-ray
光碟播放機。
注意
該產品應用了鐳射器。 若不依照本手冊的規
定進行控制、調校或使用程序進行操作,則
可能會處於有害輻射之中。
切勿打開蓋子,也不要自行修理。 所有維修
工作應由有資格的人員完成。
2
本產品裝置及隨附的使用手冊中的相關知識
產權得到了相關第三方的許可。
如果保險絲可拆下,則在沒有保險絲蓋子的
情況下,請勿使用插頭。 如果保險絲蓋子需
要更換,其顏色必須與插頭插腳面的顏色相
同。 更換蓋子可從經銷商處獲得。
如果插頭不適合家庭中的電源點,或者電源
線太短,無法到達電源點,您應取得合適
的、經安全批准的延長線,或者與經銷商聯
絡以獲得幫助。
本光碟播放機歸類為 1 類雷射產品。 若未
能按照此手冊的規定使用控制、調校或執行
程序,則可能會讓人受到有害輻射。
注意
• 開啟時有 3B 類可見或不可見雷射輻射。
應避免受到光束直接照射。(IEC 60825-1)
• 本產品使用了雷射。 若未能按照此手冊的
規定使用控制、調校或執行程序,則可能
會讓人受到有害輻射。 切勿打開蓋子,也
不要自行修理。 請向合格的維修人員尋求
維修幫助。
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
預防措施
重要安全說明
在使用裝置之前,請仔細閱讀操作說明。請
依照下面列出的所有安全說明操作。
將這些操作說明放在就手的地方,以供以後
參考。
1. 閱讀這些說明。
1 類雷射產品
觸電的危險
請勿開啟
三角形內的閃電狀箭頭是一個警告符
號,
警示您產品內部存在危險電壓。
但是,如果除了剪斷插頭之外別無他法,請
取出保險絲,然後安全地處理插頭。 請勿將
插頭連接到電源插座,因為裸露的活動電線
會造成觸電的危險。
要斷開裝置的電源,必須將插頭從電源插座
拔下,因此應使電源插頭隨時準備好使用。
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
2. 遵守這些說明。
3. 注意所有警告資訊。
4. 按照所有說明進行操作。
5. 切勿在靠近水的地方使用本装置。
6. 乾布進行清潔。
7. 切勿擋住任何通風口。應按照製造商說
明進行安裝。
8. 不要安裝在散熱器、加熱器、爐子或散
熱的其他裝置(包括 AV 接收器)等熱
源附近。
9. 切勿輕視極化插頭或接地式插頭的安全
用途。極化插頭帶有寬窄兩個插腳。接
地式插頭帶有兩個插腳和第三個接地針
腳。寬插腳和第三個針腳均用於安全用
途。當提供的插頭不能插入您的電源插
座時,請找電氣技師換一個新的插座。
10. 電源線不可踩踏或擠壓,特別是在插
頭、連接插座及裝置的出口位置。
11. 僅使用製造商指定的連接件/配件。
12. 只能放在製造商指定
的手推車、座台、
三角架、支架或桌
子上,或者帶裝置
一起出售。如果使
用手推車,移動手
推車/裝置組合時要
格外小心,避免翻倒損壞。
13. 在雷暴期間或長期不使用時,請拔下此
裝置。
14. 請向合格的維修人員尋求所有維修幫助。
當裝置遭到任何方式的損壞時就需要進行
維修,如電源線或插頭損壞、灑水或異物
跌入裝置、裝置被雨淋或受潮、裝置不能
正常工作或裝置被摔到地上。
光碟儲藏和管理
• 拿光碟
-- 光碟上的指紋或劃痕會降
低音質和畫質,或者導致
跳躍。
-- 應避免觸摸已錄製資料的光碟表面。
-- 拿光碟時要拿光碟的邊,以防指紋落在
表面上。
-- 請勿在光碟上粘貼紙片或帶子。
• 清潔光碟
-- 如果光碟印上指紋或蒙上灰塵,請用已
稀釋的溫和洗滌劑清洗,然後用柔軟的
布料擦。
-- 清潔時,應從光碟的內部向外部輕柔地
擦。
• 光碟儲藏
`` 請勿放在陽光直射處。
`` 請放在陰涼通風處。
`` 請放在乾淨的保護套內
且垂直存放。
處理注意事項
• 本裝置不可遭受水滴或濺到水。不要在裝置
上放置任何盛滿水的物體(例如花瓶)。
• 若要徹底關閉本裝置,必須將電源插頭從
墻上插座中拔出。因此,電源插頭應一直
保持方便拔插。
• 不要將多個電子裝置插入到同一個墻上插
座中。插座過載會導致它過熱,從而引發
火災。
• 外殼維護。
-- 在將其他組件連接到此播放機前,請確
保將它們關閉。
-- 如果您突然將播放機從很冷的地方搬到
很暖和的地方,則可能會在操作部件和
鏡頭上產生冷凝,從而導致光碟播放異
常。如果發生這種情況,請拔下播放機
的電源插頭,等待兩個小時,然後再將
插頭連接至電源插座。然後再次插入光
碟並嘗試播放。
• 如果產品發出異常噪音、燒焦味或冒煙,
請立即關閉電源開關並從牆上插座拔下電
源插頭。然後,就近與客戶服務中心聯
絡,以取得技術協助。不要使用產品。繼
續使用產品,對這些現象置之不理,則可
能會導致火災或觸電。
版權
© 2013 Samsung Electronics Co.,Ltd.
版權所有;如果事先沒有得到 Samsung
Electronics Co.,Ltd. 的書面許可,不得翻
印或複製本使用手冊的一部分或全部。
內容
安全資訊
網絡........................................................... 11
警告............................................................. 2
語言........................................................... 13
預防措施...................................................... 2
光碟儲藏和管理........................................... 3
處理注意事項............................................... 3
版權............................................................. 3
入門指南
在使用本使用者手冊之前............................. 4
本播放機可以播放的光碟標誌...................... 4
配件............................................................. 6
前面板.......................................................... 6
後面板.......................................................... 6
遙控器.......................................................... 7
系統設置.................................................... 12
安全性........................................................ 13
一般........................................................... 13
支援........................................................... 13
媒體播放
播放商業燒錄的光碟.................................. 14
播放 USB 裝置上的檔案............................. 14
播放含有使用者燒錄內容的光碟................ 15
播放位於電腦中的內容............................... 15
控制視訊播放............................................. 15
控制音樂播放............................................. 16
播放相片內容............................................. 17
連接
附錄
連接到電視................................................... 7
故障排除.................................................... 17
連接到音頻系統........................................... 8
連接到網絡路由器........................................ 8
規格........................................................... 19
設定
初始設定...................................................... 9
功能表導覽................................................... 9
存取設定功能表........................................... 9
顯示............................................................. 9
音頻........................................................... 10
3
入門指南
區域代碼
在使用本使用者手冊之前
本播放機可以播放的光碟類型和內容
媒體
視訊
音樂
相片
光碟類型
Blu-ray 光碟
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
詳細資料
光碟類 區域代
型
碼
a
以 BD-RE 格式錄製的 BD-ROM 或 BD-RE/-R。
DVD-VIDEO、已錄製然後最終化的已錄製 DVD+RW/DVDRW(V)/DVD-R/+R,或者包含 DivX、MKV、MP4 內容的
USB 儲存媒體。
Bluray 光
碟
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 儲存媒體
上錄製的包含 MP3 或 WMA 內容的音樂。
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 儲存媒體
上錄製的包含 JPEG 內容的音樂。
✎✎附註
`` 由於光碟類型或錄製條件的原因,本播放機可能不能播放某些 CD-RW/-R 和 DVD-R 光碟。
`` 如果未以 DVD 視訊格式正確錄製 DVD-RW/-R,它將無法播放。
`` 本播放機不能播放 DVD-R 上以超過 10 Mbps 的位元速率錄製的內容。
`` 本播放機不能播放 BD-R 或 USB 裝置上以超過 25 Mbps 的位元速率錄製的內容。
`` 一些類型的光碟片可能無法播放,或者在使用特定功能時(例如執行角度變更和縱橫比調
整時)無法播放。關於光碟的資訊已在光碟盒上詳細寫明。請在需要時參閱此資訊。
`` 播放 BD-J 標題時,與普通標題相比,加載時間可能稍長一些,可能某些功能執行起來很
慢。
本播放機無法播放的光碟類型
• HD DVD
• DVD-ROM/PD/
MV 等等
4
• DVD-RAM
• 超級音頻 CD
(CD 層除外)
• DVD-RW(VR 模式)
• 用於編寫的 3.9 GB
DVD-R。
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-G 只能播放音頻,
不能播放視訊。)
本播放機可以播放的光碟標誌
播放機和光碟都按照地區進行編碼。
這些區域代碼必須相匹配才能播放光碟。如果這
些區域代碼不匹配,則不能播放光碟。
本播放機的區域代碼在播放機的後面板上顯示。
DVDVIDEO
b
地區
Blu-ray 光碟
BD-LIVE
DivX
英國、法國、德國
等國家/地區的 PAL
廣播系統
北美洲、中美洲、南美
洲、韓國、日本、台灣、
香港和東南亞。
歐洲、格陵蘭、法國各地
區、中東、非洲、澳大利
亞和紐西蘭。
c
印度、中國、俄羅斯、中
亞和南亞。
1
美國、美國領土和加拿大
2
歐洲、日本、中東、埃
及、南非、格陵蘭
3
台灣、韓國、菲律賓、印
尼、香港
4
墨西哥、南美洲、中美
洲、澳大利亞、新西蘭、
太平洋群島、加勒比
5
俄羅斯、東歐、印度、非
洲大部分地區、朝鲜、蒙
古
6
中國
支援的檔案格式
USB 連接注意事項
• 本播放機支援 USB 儲存媒體、MP3 播放
器、數碼相機、USB 讀卡器。
• 本播放機不支援長度超過 128 個字
元的資料夾或檔案名稱。
• 某些 USB/外接式 HDD/數碼相機裝置可能
與本播放機不相容。.
• 本播放機支援 FAT16、FAT32 和 NTFS 檔
案系統。
• 將 USB 裝置直接連接到播放機的 USB
埠。透過 USB 線纜連接可能會導致相容性
問題。
• 如果將多個記憶體裝置插入多卡讀卡器
中,則可能會導致讀卡器無法正常操作。
• 本播放機不支援 PTP 通訊協定。
• 在「載入」過程中不要斷開 USB 裝置連接。
• 影像解析度越高,顯示影像所需的時間越
長。
• 本播放機不能播放從商業網站下載的帶有 DRM (Digital Rights Management) 的 MP3 檔
案。
• 本播放機僅支援 30fps(每秒幀數)的視訊。
• 本播放機僅支援 USB 大量儲存裝置類別 (MSC) 裝置,例如隨身碟和 USB HDD。(不支援
HUB。)
• 某些 USB HDD 裝置、多卡讀卡器及隨身碟可能與本播放機不相容。
• 如果某 USB 裝置需要過多功率,則它可能會受到電路安全裝置的限制。
• 如果從 USB HDD 播放不穩定,請透過將 HDD 插入到墻上插座來提供額外的電源。
如果問題仍然存在,請與 USB HDD 製造廠商聯絡。
• 必須使用「安全地卸載USB」功能移除USB 儲存裝置,以防可能損壞 USB 記憶體。
按 HOME 按鈕移至主螢幕,按黃色 (C) 按鈕,然後按 v 按鈕。
• 對於任何資料檔案損壞或資料遺失,SAMSUNG 不承擔任何責任。
• 本播放機不支援 NTSF 壓縮檔案、備用檔案或加密的檔案。
• 可以在桌上型電腦上修復或格式化 USB 裝置。(僅限 MS-Windows 作業系統)
視訊檔案支援
副檔名
*.avi
容器
AVI
視訊轉碼器
音頻轉碼器
DivX 3.11/4/5/6
MP3
Dolby Digital
DTS
WMA
PCM
MP4v3
H.264 BP/MP/HP
*.mkv
VC-1 AP
MKV
H.264 BP/MP/HP
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
PS
MPEG2
H.264 BP/MP/HP
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
解析度
1920x1080
1920x1080
1920x1080
•• 限制
--即使檔案由上方提到的受支援轉碼器來編碼,如果其內容有問題的話,也可能無法播
放。
--如果檔案的容器資訊錯誤或檔案本身損毀,則不能保證可以正常播放。
--位元速率/幀速率高於標準的檔案在進行聲音/視訊播放時可能會斷斷續續。
--如果檔案的索引表格損壞,搜尋 (跳過) 功能便無法使用。
•• 視訊解碼器
--最高支援 H.264 Level 4.1 和 AVCHD
--不支援 H.264 FMO/ASO/RS、VC1 SP/MP/AP L4
--MPEG4 SP, ASP :
低於 1280 x 720 : 最高 60 幀
高於 1280 x 720 : 最高 30 幀
--不支援 GMC 2 或更高版本
•• 音頻解碼器
--支援 WMA 7、8、9 和 STD
--不支援 22050Hz 單聲道的 WMA 取樣率.
--AAC: 最高取樣率: 96Khz(8、11、12、16、22、24、32、44.1、48、64、88.2、96)
最高位元速率: 320kbps。
音樂檔案支援
副檔名
容器
音頻轉碼器
*.mp3
MP3
MP3
-
WMA
* 取樣率 (kHz) - 8、11、16、22、32、44.1
和 48
* 位元速率 - 在 5kbps 到 355kbps 範圍內
的所有位元速率
1920x1080
1920x1080
*.wma
WMA
1920x1080
支援範圍
1920x1080
1920x1080
圖片檔案支援
1920x1080
副檔名
類型
解析度
1920x1080
*.jpg
*.jpeg
*.jpe
JPEG
15360x8640
PNG
15360x8640
1920x1080
*.png
5
AVCHD(先進視訊轉碼器高解析度)
前面板
• 本播放機可以播放 AVCHD 格式的光碟。 這些光碟一般在攝錄放影機中錄製和使用。
• AVCHD 格式是高解析度數碼視訊相機格式。
• MPEG-4 AVC/H.264 格式以高於常見影像壓縮格式效率高的效率壓縮影像。
• 一些 AVCHD 光碟使用「x.v.Color」格式。 本播放機可以播放使用「x.v.Color」格式的
AVCHD 光碟。
• 「x.v.Color」是 Sony Corporation 的商標。
播放/暫停按鈕
停止 按鈕
打開/關閉按鈕
• 「AVCHD」和 AVCHD 標誌是 Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation 的商標。
電源按鈕
✎✎附註
`` 一些 AVCHD 格式光碟可能不能播放,具體視錄製條件而定。
AVCHD 格式的光碟需要最終化。
`` 與普通 DVD 攝錄放影機光碟相比,「x.v.Color」提供更寬的顏色範圍。
USB HOST
配件
遙控器感應器
光碟托盤
請檢查下列隨附的配件。
✎✎附註
AUDIO
HOME
SUBTITLE
`` 當播放機顯示 Blu-ray 光碟功能表時,您不能透過按播放機或遙控器上的「播放」按鈕來開始播
放電影。要播放影片,必須在光碟功能表中選取「播放影片」或「開始」,然後按 v 按鈕。
`` 使用 USB Host 插孔進行軟件升級只能使用 USB 快閃記憶棒進行。
BONUS
VIEW
HDMI 電纜
用於遙控器的電池
(AAA 號)
REPEAT
A-B
REPEAT
FULL
SCREEN
後面板
使用手冊
遙控器
HDMI OUT
6
LAN
DIGITAL AUDIO OUT
連接
遙控器
遙控器功能描述
連接到電視
打開和關閉播放機。
打開和關閉電視。
設定完成後,您就可以在電視上設定輸入 源。
電視音量調節。
使用此按鈕打開和關閉光碟托盤。
將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到電視的 HDMI IN 插孔。
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
按數字按鈕以操作選項。
用來進入快顯功能表/標題功能表。
使用此按鈕以進入光碟功能表。
按此按鈕以停止光碟。
按此按鈕以播放光碟。
按此按鈕以暫停光碟。
AUDIO
HOME
按此按鈕以移至主功能表。
SUBTITLE
使用此按鈕存取光碟 (Blu-ray 光碟/DVD)
上的不同音頻功能。
按此按鈕以切換 Blu-ray 光碟/DVD 的字幕語言。
按此按鈕以使用「Tools(工具)」功能表。
用來在播放 Blu-ray/DVD 光碟取期間顯示播
放資訊。
用來選取功能表項目並變更功能表值。
✎✎附註
按此按鈕以結束功能表。
返回前一個功能表。
這些按鈕同時用於播放機的功能表和多個
Blu-ray 光碟功能。
按此按鈕以使用 bonusview 功能。
BONUS
VIEW
REPEAT
A-B
REPEAT
按此按鈕可 使用全螢幕 功能;在播 放
bluray 光碟/DVD 期間,此功
能無法操作
FULL
SCREEN
允許您重複播放某一標題、章節、曲目或
光碟。
允許您重複播放 A-B 光碟.
安裝電池
音頻
視訊
按此按鈕以向後或向前搜尋光碟。
按此按鈕以向後或向前跳過。
`` HDMI 電纜輸出數碼視訊和音頻,因此不需要連接音頻電纜。
`` 視您的電視而定,某些 HDMI 輸出解析度可能不起作用。請參閱電視的使用手冊。
`` 當使用 HDMI 電纜將播放機連接至電視或新電視,然後第一次開啟電視時,播放機會自動將
HDMI 輸出解析度設定為電視支援的最高解析度。
`` HDMI 電纜很長可能會導致螢幕雜訊。如果出現這種情況,請將「HDMI 深色」設定為「關閉」。
✎✎附註
`` 如果遙控器不能正常工作:
•
•
•
•
`` 如果使用 HDMI 至 DVI 電纜來連接到顯示裝置,則您還必須將播放機上的 Digital Audio Out
連接至音頻系統才能聽到音頻。
請檢查電池的極性 (+/–) 是否安裝正確。
請檢查電池是否耗盡。
請檢查遙控器感應器是否被異物阻擋。
請檢查產品附近是否有熒光干擾。
`` 若要以 HDMI 720p、1080i 或 1080p 輸出模式觀看視訊,則必須使用高速(類別 2)HDMI 電
纜。
`` HDMI 僅將純數碼訊號輸出到電視。
如果電視不支援 HDCP(高頻寬數碼內容保護),畫面上將出現雪花噪訊。
!! 注意
`` 請按照當地的環境法規處理電池。 不要將它們
與家庭垃圾放在一起。
7
連接到網絡路由器
連接到音頻系統
您可以使用下面說明的其中一種方法,將 Blu-ray 播放機連接到音頻系統。
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
方法 1
您可以使用下面說明的其中一種方法,將本播放機連接到網絡路由器。
若要使用 DLNA 網絡功能,必須按圖中所示將電腦連接到網絡。
有線網絡
連接到支援 HDMI 的 AV 接收器
• 將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到 AV 接收器的 HDMI IN 插孔。
• 最佳品質(建議)
方法 2 連接到具有 Dolby Digital 或 DTS 解碼器的 AV 接收器
寬頻數據機
(含有整合式路由器)
• 使用同軸電纜(未包括),將產品上的「同軸數碼音頻輸出」插孔連接到接收器的「數碼
同軸輸入」插孔。
• 一般品質
• 當「數碼輸出」設為 PCM 時,僅可從前面揚聲器聽到聲音。
寬頻服務
或
路由器
寬頻數據機
寬頻服務
方法 1
音頻
方法 2
音頻
✎✎附註
`` 可能不允許對 Samsung 的軟件更新伺服器進行網際網路,具體視您使用的路由器或
ISP 的政策而定。如需詳細資訊,請與 ISP (互聯網服務提供者) 聯絡。
`` 對於 DSL 使用者,請使用路由器建立網絡連線。
8
設定
`` 如果讓播放機停留在停止模式超過 5
分鐘沒有使用,屏幕保護程序將出現
在電視上。 如果播放機停留在屏幕保
護程序模式超過 25 分鐘,電源會自
動關閉。
初始設定程序
• 如果未配置初始設定,則除了下面說明
的情況之外,主功能表不會出現。
• 升級軟件版本後,本播放機中的 OSD
(螢幕顯示)可能會變更。
• 存取步驟可能會因選定的功能表而異。
• 此產品的載入過程完成後, 可以操作面
板按鈕和遙控器。
功能表導覽
AUDIO
HOME
選取音樂。
2
選取設定。
3
顯示可以使用的按鈕。
4
選取應用程式
電視外觀比例
5
選取影片。
6
選取相片。
視您電視的類型而定,您可能要調校屏幕大
小設定。
✎✎附註
SUBTITLE
`` 視訊、相)和 音樂 選項需要您將相
應的光碟插入播放機中,或將 USB 快
閃裝置連接至播放機。
1
「初始設定程序」可讓您設定 OSD 和功能表
語言、配置與家庭網絡的連線、選擇適合您的
電視的畫面比例輸出(螢幕尺寸和格式)。
3
✎✎附註
`` 如果未配置初始設定,則除了下面說
明的情況之外,主功能表不會出現。
`` 如果在網絡設置期間按下藍色 (D) 按
鈕,則可以存取主功能表,即使網絡
設置尚未完成也是如此。
`` 返回到主功能表後,將會自動取消全
螢幕 模式。
`` 如果要再次顯示 初始設定 畫面以進行
變更,請在未插入光碟的情況下,按產
品前面板上的 @ 按鈕 5 秒鐘以上。這
會將播放機重設為其預設設定。 這會將
播放機重設為其預設設定。
`` 此產品的載入過程完成後,便可以操
作 HDMI-CEC 功能。.
`` 如果您要使用 Anynet+(HDMI-CEC) 功
能,請依照下面的說明操作。
1) 使用 HDMI 纜線將播放機連接至
Anynet+(HDMI-CEC) 相容 Samsung 電
視。
2) 在電視和播放機上將
Anynet+(HDMI-CEC) 功能設定為
開。
3) 將電視設定為「初始設定程序」。
2
存取設定功能表
4
BONUS
REPEAT
REPEAT
若要存取「設定」功能表或子功能表,請依
照下面的步驟操作:
FULL
1
HOME 按鈕: 按此按鈕以移至主功
能表。
1.
2
RETURN 按鈕: 返回前一個功能表。
2.
按 ◄► 按鈕選取設定,然後按 v
按鈕.
3
v (確認)/方向按鈕:
移動游標或選取項目。
啟動目前選定的項目。
確認設定。
3.
按下 ▲▼ 按鈕以選取所需的子功
能表,然後按 v 按鈕
4
EXIT 按鈕: 按此按鈕以結束功能表。
4.
按下 ▲▼ 按鈕以選取所需的項
目,然後按 v 按鈕.
5.
按 結束 按鈕結束功能表。
VIEW
A-B
SCREEN
• 主功能表
6
1
影片
相片
音樂
設定
2
5
4
App 1
沒有光碟
App 2
a 變更裝置
App 3
顯示
1
按下 POWER 按鈕。將出現主功能
表。
✎✎附註
`` 存取步驟可能會因選定的功能表而
異。 升級軟件版本後,本播放機中的
OSD(螢幕顯示)可能會變更。
可以配置各種顯示選項,例如電視縱橫比、
解析度等等。
✎✎附註
`` 視光碟類型的不同,某些縱橫比可能
不可用。
`` 如果選取不同於電視縱橫比的縱橫比
選項,則圖像可能會變形。
BD Wise(僅限 Samsung 播放機)
BD Wise 是 Samsung 最新的內部連接功能。
透過 HDMI 使用 BD Wise 將 Samsung 播放
機和 Samsung 電視互連,並且播放機和電視
上皆有 BD Wise 時,播放機會以 Blu-ray
Disc/DVD 的視訊解析度和幀速率輸出視訊。
✎✎附註
`` BD Wise 為「開」時,「解析度」設定會自
動預設為 BD Wise,並且 BD Wise 會出現在
「解析度」功能表中。
`` 如果將播放機連接至不支援 BD Wise 的裝
置,則不能使用 BD Wise 功能。
`` 為了 BD Wise 正常操作,請在播放機和電視
上都將 BD Wise 功能表設定為開啟。.
解像度
可讓您將 HDMI 視訊訊號的輸出解像度設定為 自
動、1080p、1080i、720p 或576p/480p。 數字表
示每幀的視訊行數。 i 和 p 分別表示隔行和逐
行。 行數越高,品質越高。
App 4
d 檢視裝置 " 確認
3
9
✎✎附註
根據輸出模式的解析度
• Blu-ray 光碟/電子內容/數碼內容播放
HDMI / 已連接
輸出
設定
BD Wise
自動
HDMI 模式
Blu-ray 光
碟
電子內容/
數碼內容
Blu-ray 光碟
的解析度
1080p
電視輸入的最 電視輸入的最
大解析度
大解析度
1080@60F
(電影幀率 :
關閉)
1080@60F
1080@60F
電影幀: 自動
(24Fs)
1080@24F
1080@24F
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
• DVD 播放
設定
輸出
HDMI / 已連接
HDMI 模式
BD Wise
576i/480i
Auto
電視輸入的最大
解析度
1080p
1080p
1080i
1080i
720p
720p
576p/480p
576p/480p
`` 如果連接至播放機的電視不支援電影幀或
選取的解析度,訊息「如果在選取「是」
之後沒有顯示圖片,請等待 15 秒以恢
復為之前的解析度。 您要變更解析度
嗎?」將會出現。
如果選取是,電視的螢幕空白 15 秒鐘,
然後解析度將自動恢復為先前的值。
`` 如果在變更解析度之後保留空白,請取出
所有光碟,然後按 @ 按鈕 5 秒鐘以上。
所有設定將恢複為出廠預設值。 遵循上
一頁中的步驟訪問每種模式並選取電視將
支援的顯示設定。
`` 恢復出廠預設設定後,將會刪除所有已儲
存的使用者 BD 資料。
`` Blu-ray 光碟必須具有 24 幅率功能才能
使用電影幀 (24Fs) 模式。
電影幀率 (24Fs)
將電影幀 (24Fs) 功能設定為自動可讓您將
播放機的 HDMI 輸出調整為每秒 24 幀以改
善畫質。
只能在支援此幅率的電視上享受電影幀
(24Fs) 功能。 只有播放機處於 HDMI 1080p
輸出解析度模式時,才能選取電影幀。
HDMI 色彩格式
可讓您設定 HDMI 輸出的色彩空間格式,以與
所連接裝置(電視,顯示器等)的功能相符。
數碼輸出
可讓您選取適合您的電視或 AV 接收器的數碼音頻輸出格式。 如需更多詳細資料,請參閱數碼
輸出選取表格。
數碼輸出選取
設定
PCM
位元流
(DTS 重新編碼)
HDMI 接收
HDMI 接 同軸電 HDMI 接收
同軸電纜 器或同軸電
收器
纜
器
纜
最多 7.1 PCM 2 聲
重新編碼的
PCM
PCM
PCM 2 聲道
聲道
道
DTS
Dolby
PCM 2 聲 PCM 2 聲
Dolby
Dolby
重新編碼的
Digital
道
道
Digital
Digital
DTS
Dolby
Dolby
PCM 2 聲 PCM 2 聲
Dolby
重新編碼的
Digital
Digital
道
道
Digital
DTS
Plus
Plus
Blu-ray
Dolby
PCM 2 聲 PCM 2 聲
Dolby
Dolby
重新編碼的
光碟上的
TrueHD
道
道
TrueHD
Digital
DTS
音頻流
PCM 2 聲 PCM 2 聲
重新編碼的
DTS
DTS
DTS
道
道
DTS
PCM 2 聲 PCM 2 聲
重新編碼的
DTS-HD HRA
DTS-HD HRA
DTS
道
道
DTS
PCM 2 聲 PCM 2 聲
重新編碼的
DTS-HD MA
DTS-HD MA
DTS
道
道
DTS
PCM 2 聲 PCM 2 聲
PCM
PCM 2 聲道 PCM 2 聲道
PCM 2 聲道
道
道
DVD 上的
音頻流
Dolby
Digital
DTS
可讓您以深色 從 HDMI OUT 插孔輸出視訊。 深色
提供更深的色度提供更精確的顏色再現。
可讓您改善觀賞 DVD 時的畫面品質。
位元流
(未經處理)
連線
HDMI 深色技術
漸進模式
10
音頻
Blu-ray
光碟的清
晰度
任意
PCM 2 聲 PCM 2 聲
道
道
PCM 2 聲 PCM 2 聲
道
道
位元流
(Dolby D 重新編
碼)
支援 HDMI 支
援的 AV 接收
器或同軸電纜
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital
重新編碼的
Dolby Digital
重新編碼的
Dolby Digital
重新編碼的
Dolby Digital
*
*
*
*
PCM 2 聲道
Dolby
Digital
Dolby
Digital
Dolby
Digital
Dolby Digital
DTS
DTS
DTS
DTS
將主要特徵音頻和
BONUSVIEW 音頻流
將主要特徵音頻和
僅輸出主要特徵音頻,以便 AV 接
一起解碼為 PCM
BONUSVIEW 音頻流一起解碼
收器可以解碼音頻位元流。
音頻,並新增「導
為 PCM 音頻,並新增「導覽 您將聽不到 BONUSVIEW 音頻和「導
覽音效」,然後將
音效」。
覽音效」。
PCM 音頻重新編碼
為 DTS 位元流。
將主要特徵音頻和
BONUSVIEW 音頻流一起
解碼為 PCM 音頻,並
新增 導覽音效,然後
將 PCM 音頻重新編碼為
Dolby Digital 位元流
**如果 Source Stream 是 2 聲道,則不會
套用「Dolby D 重新編碼」設定。
Blu-ray 光碟可能包括三種音頻流:
-- 主要特徵音頻: 主要特徵的音頻聲道。
-- BONUSVIEW 音頻: 附加聲道,例如導演或
演員的註解。
-- 導覽音效: 選擇一些功能表導覽時,導覽
音效可能會發出聲音。 導覽音效在每張
Blu-ray 光碟上各不相同。
✎✎附註
`` 請務必選取正確的 Digital Output,否
則將聽不到聲音或只聽到很大聲的雜音。
`` 如果 HDMI 裝置(AV 接收器,電視)
與壓縮的格式 (Dolby digital, DTS)
不相容,則音頻信號輸出為 PCM。
`` 一般 DVD 沒有 BONUSVIEW 音頻和導
覽音效。
`` 一些 Blu-ray 光碟沒有 BONUSVIEW
音頻和導覽音效。如果播放 MPEG 音
頻聲道,則音頻訊號將輸出為 PCM,
而不管 Digital Output Selections
設為什麼 (PCM 或 Bitstream)。
`` 如果您的電視與壓縮多聲道格式
(Dolby Digital, DTS) 不相容,則
播放機可能會輸出 PCM 2 聲道向下
採樣的音頻,即使將在設定功能表上
選取了 Bitstream (Re-encoded 或
Unprocessed) 也是如此。
`` 如果您的電視與超過 48kHz 的 PCM 採
樣不相容,則播放機可能會輸出 48kHz
向下採樣的 PCM 音頻,即使將 PCM
Downsampling 設定為關閉也是如此。
執行下列步驟來配置網絡設定。
PCM 向下採樣
可讓您選擇讓 96Khz PCM 訊號向下採樣為 48Khz,
然後再將它們輸出到擴音機。如果擴音機或接收
器與 96Khz 訊號不相容,請選擇「開啟」。
✎✎附註
`` 只能透過有線連線將本裝置連接至網
絡。
動態範圍控制
有線網絡設定
可讓您將動態範圍控制套用至 Dolby Digital、
Dolby Digital Plus 和 Dolby True HD 音頻。
1.
• 自動:根據 Dolby TrueHD 聲道中的資訊,
自動控制 Dolby TrueHD 音頻的動態範圍。
對於 Dolby Digital 和 Dolby Digital
Plus,還會開啟動態範圍控制。
• 關閉:保持不壓縮動態範圍,以讓您聽到原
始聲音。
• 開啟:對於所有三種 Dolby 格式,開啟動態
範圍控制。讓較安靜的聲音大聲一些,並降
低較大聲音的音量。
2.
3.
網絡
請與您的 ISP 聯絡以瞭解您的 IP 地址是靜
態的 還是動態的。 如果它是動態的(大部
分情況下如此),建議使用 Auto(自動)網
絡設定程序。 此程序最為簡單,並且在大多
數情況 下都可用。 如果它是靜態的,則必
須使用手動設定程序。
按 ▲▼ 按鈕選取 網絡,然後按 v 按
鈕.
按 ▲▼ 按鈕選取 有線網絡設定,然後
按 v 按鈕。有線網絡設定畫面將會出
現。
設定
有線網絡設定
顯示
: 自動
\ 音頻 互聯網協議設定
0
0
0
: 0
系統k IP 地址
0
0
0
子網絡遮罩
: 0
網絡
0
0
0
閘道
: 0
語言
DNS
: 自動
安全性
0
0
0
DNS 伺服器
: 0
一般
支援
> 移動 " 選擇 ' 返回
縮混模式
可讓您選取與您的立體聲系統相容的多聲道縮
混方法。您可以選擇將播放機縮混成普通立體
聲或兼容環繞音的立體聲。
在主功能表中,按 ◄► 按鈕選取 設
定, 然後按 v 按鈕.
4.
5.
7.
9.
若要進入產品的網路設定,請依照下面的步
驟操作:
1.
2.
3.
4.
6.
自動功能會自動取得並填寫 IP 地址、
子網絡遮罩等的值。
7.
8.
`` 此程序可能最多需要 5 分鐘。
選取 網絡測試,然後按 v 以確保播
放機已連接至網絡。
如果網絡功能未取得網絡值或者您選取
手動,請移至「手動設定」的說明。
在開始手動網絡設定之前,您需要取得網絡
設定值。
自動,則選取它。 (按下 v 選取
自動,然後按 v)。
網絡功能取得網絡值後,按 返回 按
鈕。
網絡測試完成後,按 返回 兩次以返回
到主功能表。
手動網絡設定
5.
✎✎附註
6.
8.
9.
在主功能表中,按 ◄► 按鈕選取 設
定, 然後按 v 按鈕.
按 ▲▼ 按鈕選取 網絡,然後按 v
按鈕.
按 ▲▼ 按鈕選取 有線網絡設定,然
後按 v 按鈕。有線網絡設定畫面將
會出現。
在 互聯網協議設定 畫面上,按 v
按鈕.
按 ▲▼按鈕選取手動,然後按 v 按
鈕.
按 ▼ 按鈕移至第一個輸入欄位 (IP 地
址)。
使用遙控器上的數字按鈕輸入數字。
完成每個欄位後,使用 ► 按鈕成功移
至下 一個欄位。
還可以使用其他箭頭按鈕來上移、下移
或返回。
輸入 IP 地址、子網絡遮罩 和 閘道
值。
10. 按 ▼ 按鈕移至 DNS。
11
11. 按 ▼按鈕移至第一個 DNS 輸入欄位。
12. 如上面一樣輸入數字。
13. 按遙控器上的 返回 按鈕。
14. 執行 網絡測試 以確保產品已連接到網
絡。
網絡測試
使用此功能表來連接到有線網絡或檢查您的
網絡連線是否正常工作。
使用 BD-LIVE™
若要下載 DLNA 軟件
Anynet+ (HDMI-CEC)
將播放機連接到網絡後,您可以使用
BD-LIVE 相容光碟享受各種與電影相關
的服務內容。
1. 造訪 Samsung.com。
Anynet+ 是一種方便功能,它提供與其他帶
有 Anynet+ 功能的 Samsung 播放機的連結
操作。
要操作此功能,請使用 HDMI 電纜將本播放
機連接到 Samsung 電視。
Anynet+ 設定為 on 時,您可以使用
Samsung 電視遙控器操作本播放機,並且只
) 按鈕就可以
需按電視遙控器上的播放 (
開始播放光碟。
1. 將 USB 記憶棒插入播放機側邊的 USB
插孔,然後檢查其剩餘記憶體。 記憶
體裝置至少要有 1GB 可用空間才能容
納 BD-LIVE 服務。
2. 插入支援 BD-LIVE 的 Blu-ray 光碟。
網絡狀態
3. 從光碟製造商提供的各種 BD-LIVE
檢查是否已建立網絡與互聯網的連線。
✎✎附註
BD-Live 互聯網連接
設定這個選項以在使用 BD-LIVE 服務時,允
許或禁止互聯網連線。
• 允許(所有): 將對所有 BD-LIVE 內容允
許互聯網連線。
• 允許 (僅限有效): 僅對於包含有效證書
的 BD-LIVE 內容允許互聯網連線。
• 禁止: 將對所有 BD-LIVE 內容都不允許
互聯網連線。
✎✎附註
`` 甚麼是有效的證書?
當播放機使用 BD-LIVE 來將光碟資料
和要求傳送至伺服器以認證光碟時,
伺服器使用所傳送的資料來檢查該光
碟是否有效,並將證書傳回給產品。
`` 使用 BD-LIVE 內容時,互聯網連線可
能會受到限制。
12
2. 按一下「服務資訊」>「下載中心」,
在出現的欄位中輸入播放機的產品編
號,然後按一下「看所有結果」。
3. 在下一個畫面上,按一下 從下載功能表
取得下載項目。
4. 在下一頁上按一下 軟件。
5. 按一下 檔案下 DLNA 行中的圖示以開始
下載。
服務內容中選取項目。
`` 使用 BD-LIVE 和提供的內容的方式可
能會因光碟製造商而異。
使用 DLNA 功能
DLNA 可讓您播放位於電腦或播放機上 NAS
相容的音樂、視訊和相片檔案。
若要將 DLNA 與播放機搭配使用,則必須將播
放機連接到網絡(請參閱第 11~12 頁)。
若要將 DLNA 與電腦搭配使用,則必須在電
腦上安裝 DLNA 軟件。
如果您有 NAS,則可以直接使用 AllShare,
無須其他軟體。
系統設置
初始設置
透過使用初始設定功能,您可以設定語言、
網絡設定等等。
如需初始設定功能的詳細資訊,請參閱本
使用手冊的初始設定小節。 (請參閱第 9
頁) 。
快速啟動
可讓您將播放機設定為透過縮短啟動時間而快
速開啟。
✎✎附註
`` 如果將此功能設定為開啟,待機電源
消耗將會提高。
✎✎附註
`` 如果 HDMI 電纜線不支援 CEC,就不
能使用此功能。
`` 如果您的 Samsung 電視具有 Anynet+
標誌,則它支援 Anynet+ 功能。
`` 視您的電視而定,某些 HDMI 輸出解
析度可能不起作用。
請參閱電視的使用手冊。
`` 關閉產品後,斷開然後連接電源線可
使它自動開機。 經過一小會,它會在
大約 15 秒鐘內自動關閉,來重新建
立 Anynet+ 連線。
`` 對於某些電視產品,如果使用
Anynet+ 功能連接至此產品,則開
啟電視可能會顯示一則警告快顯訊
息,說明找不到任何連線。 不過,
Anynet+ 連線仍已正確建立並可供使
用。
BD 資料管理
可讓您管理下載的內容,這些內容透過
支援 BD-LIVE 服務的 Blu-ray 光碟存
取,並儲存在連接的快閃記憶體裝置
上。
第一次操作本產品時,設定密碼畫面將會出現。
使用數字按鈕輸入所需的 4 位密碼。
可以檢查裝置資訊(包括儲存媒體大小)、
刪除 BD 資料或變更快閃記憶體裝置。
除非輸入密碼,否則禁止播放特定年齡等級
的 Blu-ray 光碟。
✎✎附註
`` 在外部記憶體模式中,如果在播放期
間斷開 USB 裝置的連接,光碟播放將
會停止。
`` 本播放機支援 FAT16、FAT32 和 NTFS
檔案系統。 建議使用支援 USB 2.0
通訊協定、4 MB/秒或更快讀/寫速度
的 USB 裝置。
`` 「恢復播放」功能在格式化儲存裝置
後可能不工作。
`` 「BD 資料管理」可使用的總記憶體可
能會因條件而異。
時區
從USB下載
您可以指定適合您所在地區的時區。
BD 家長分級控制
DVD 家長分級控制
此功能與已指定年齡等級或數字等級(指示
內容的成熟程度)的 DVD 配合使用,並可以
幫助您控制家人觀賞的 Blu-ray 光碟/DVD
類型。 這些數字可以幫助您控制家人可以觀
賞的 DVD 類型。
選取要設定的等級。
例如,如果您的選擇高達等級 6,則含有等
級 7 和 8 的光碟將不能播放。
較大的數字表示該節目只供成人使用。
支援
軟件升級
「軟件升級」功能表可讓您升級播放機的軟
件以改良效能或取得其他服務。
從網絡中下載
若要透過互聯網升級,請依照下面的步驟操
作:
1.
2.
選取從網絡中下載,然後按 v 按
鈕。 「正在連接至伺服器」訊息便會
出現。
如果有更新可用,一則快顯訊息將會出
現。
DivX® 隨選視頻
更改密碼
檢視 DivX® VOD 註冊代碼以購買和播放
DivX® VOD 內容。
3.
變更用於存取安全功能的 4 位密碼。
4.
如果您忘記了您的密碼
✎✎附註
語言
可以選取偏好用於主功能表、光碟功能表等
的語言。
✎✎附註
`` 選取的語言只有在光碟上受支援時才
會出現。
1. 取出光碟。
2. 按住前面板 @ 按鈕 5 秒鐘以上。
所有設定將恢復為出廠設定。
✎✎附註
`` 恢復出廠預設設定後,將會刪除所有
使用者已儲存的 BD 資料。
`` 從網絡中下載 插孔來升級軟件時,光
碟托盤必須是空的。
一般
安全性
如果您選取 是,下載過程將會開始。
(在升級期間,切勿開啟播放機。)
更新完成後,播放機將會自動重新啟
動。
`` 產品重新啟動後再關閉時,更新才完
成。 按 POWER 按鈕打開更新的產品以
進行使用。
`` 在更新過程中,切勿手動關閉或打開
播放機。
`` 對於在軟件升級期間互聯網連線不穩
定或消費者粗心大意造成的播放機運
作失常,Samsung Electronics 不承
擔法律責任。
若要使用 By USB 來升級,請依照下面的步
驟操作:
1.
2.
3.
4.
5.
6.
7.
請造訪 www.samsung.com/
bluraysupport
將最新的 USB 軟件升級 zip 保存檔下
載到電腦。
將該 zip 保存檔解壓縮到電腦。 應該
使用與 zip 檔案同名的單一 RUF 檔。
將該RUF 檔複製到 USB 快閃磁碟中。
請確保播放機中沒有光碟,然後將 USB
快閃磁碟插入到播放機的 USB 埠中。
在播放機的功能表中,移至設定 > 支
援 > 軟件升級。
選取透過 USB。
✎✎附註
`` 使用 USB Host 插孔來升級軟件時,
光碟托盤必須是空的。
`` 軟件升級完成後,請在「軟件升級」
功能表中檢查軟件詳情。
`` 在軟件升級期間,切勿關閉播放機。
否則會導致播放機運作失常。
`` 使用 USB Host 插孔進行軟件升級必
須只使用 USB 快閃記憶棒進行。
自動升級通知
如果您已將播放機連接至網絡,然後將 自動
升級通知設定為 開,則當有播放機.
13
的新軟件版本可用時,播放機會通知您 :
1. 選取 自動升級通知,然後按 v按鈕。
2. 使用 ▲▼ 按鈕選取 開,然後按 v 按
鈕。
聯絡 Samsung
播放商業燒錄的光碟
影片
如果有新的軟件版本可用,播放機會透過快
顯訊息通知您。
服務合約條款
1.
檢視有關第三方内容和服將一般免責聲明。
若要升級韌體,請在快顯訊息上選取
是。
產品將自動關閉,然後重新啟動,接
著開始下載。 (此時切勿手動打開產
品。)
將會顯示更新進度快顯視窗。
更新完成後,產品將自動關閉。
按 POWER 按鈕打開產品。
2.
3.
4.
✎✎附註
`` 產品重新啟動後再關閉時,更新才完
成。 按 POWER 按鈕打開更新的產品以
進行使用。
`` 在更新過程中,切勿關閉產品。
`` 對於在軟件升級期間互聯網連線不穩
定或消費者粗心大意造成的產品運作
失常,Samsung Electronics 不承擔
法律責任。
媒體播放
提供聯絡資訊以協助您使用播放機。
重設
音樂
設定
2. 輕輕將光碟放入托盤,光碟的標籤朝上。
3. 按 8 按鈕卡關閉光碟托盤。播放將自
動開始。
沒有光碟
123
a
123
除了網絡設定之外,所有設定都將恢復為預
設值。
播放 USB 裝置上的檔案
您可以播放位於 USB 儲存裝置上的多媒體檔案。
1.
移到主功能表。
3.
按下 ◄► 按鈕以選擇 是,然後
按 v 按鈕。
2.
4.
5.
在停止模式中,將 USB 儲存裝置連接
到產品 前面板上的 USB 埠。
將會顯示訊息「是否要變更裝置?」。
6.
App 2
App 3
App 4
a 變更裝置 c 安全地卸載 USB d 檢視裝置 " 確認
按 ◄► 按鈕選取所需影片、音樂或
相片, 然後按下 v 按鈕。 移至步
驟 7。
4-1. 按藍色(D) 按鈕,將會顯示下面的螢
幕。 移至 5-1。
123
如果 Blu-ray 播放機中有光碟,請按
紅色 (A) 或藍色 (D) 按鈕。 如果沒
有,請移至步驟 6。
App 1
a
App 2
設定
App 3
App 4
如果按紅色(A) 按鈕,請移至步驟
5。
如果按藍色(D) 按鈕,請移至步驟
4-1。.
5-1. 按 ◄► 按鈕選取 USB,然後按 v 按
按 ▲▼ 按鈕選取 USB,然後按 v
按鈕。
6-1. 按 ▲▼ 按鈕選取所需影片、音樂或相
片, 然後按下 v 按鈕。
123
d 首頁 " 確認
鈕。
7.
14
相片
1. 按 8 按鈕卡開啟光碟托盤。
將會出現一個列出裝置內容的畫面。
根據內容的排列方式,您將看到資料夾
及/或個別檔案。
8.
9.
必要時,使用 ▲▼◄► 按鈕選取資料
夾,然後按 v 按鈕。
使用 ▲▼◄► 按鈕選取要觀看或播放
的檔案,然後按 v 按鈕。
✎✎附註
`` 即使播放機將顯示所有內容類型的播
放,但是它僅顯示您在步驟 6 或 6-1
中選取之內容類型的檔案。例如,如
果您選取了音樂,則您僅可看到音樂
檔案。 您可以透過回到主畫面並重複
步驟 4 來變更此選項。
10. 按 返回 按鈕一或多次結束目前畫面、
結束資料夾或回到主畫面。 按 結束
按鈕可直接回到主畫面。
播放含有使用者燒錄內容的光碟
您可以在 Blu-ray, DVD 或 CD 光碟上燒錄
的多媒體檔案。
1.
2.
`` 如果在播放 USB 儲存裝置時插入光
碟,裝置模式將自動切換為 “Bluray, DVD 或 CD”。
使用 ◄► 按鈕選取要觀看或播放的內
容類型 - 視訊、相片或音樂 - 然後按
v 按鈕。
✎✎附註
`` 即使播放機將顯示所有內容類型的播
放,但是它僅顯示您在步驟 2 中選取
之內容類型的檔案。例如,如果您選
取了音樂,則您僅可看到音樂檔案。
您可以透過回到主畫面並重複步驟 2
來變更此選項。
✎✎附註
`` 必須安全移除 USB 儲存裝置(透過執
行「安全地卸載 USB」功能),以防
可能損壞 USB 記憶體。 按 HOME 按
鈕移至主功能表,然後選取黃色 (C)
按鈕,再按 v 按鈕。
將使用者燒錄的光碟放入光碟托盤中,
光碟的標籤向上,然後關閉托盤。「已
連接裝置」快顯視窗將會出現。
3.
4.
5.
6.
播放位於電腦中的內容
若要在 Blu-ray 光碟播放機上播放位於電腦
中的內容,您必須將 Blu-ray 播放機連接到
網絡,同時必須在電腦中安裝 DLNA 軟件。
7.
8.
使用 ▲▼◄► 按鈕選取要觀看或播放
的檔案,然後按 v 按鈕。
按 返回 按鈕一或多次結束目前畫面、
結束資料夾或回到主畫面。 按 結束
按鈕可直接回到主畫面。
播放電腦中的內容
1.
2.
3.
控制視訊播放
移到主功能表。
按遙控器(裝置)上的藍色 (D) 按
鈕:
在所顯示的 Device(裝置)畫面中,
選取您的電腦。.
4. 使用 ◄► 按鈕選取要觀看或播放的內
容類型 - 視訊、相片或音樂 - 然後按
v 按鈕。
您可以控制位於 Blu-ray, DVD、CD、USB 或
電腦 儲存裝置上的視訊內容的播放。視光碟
而定,本手.
冊中說明的一些功能可能無法使用。
遙控器上用於播放視訊的按鈕
2
✎✎附註
`` 即使播放機將顯示所有內容類型的播
放,但是它僅顯示您在步驟 4 中選取
之內容類型的檔案。例如,如果您選
取了音樂,則您僅可看到音樂檔案。
您可以透過回到主畫面並重複步驟 4
來變更此選項。
將會出現一個列出裝置內容的畫面。
根據內容的排列方式,您將看到資料夾
及/或個別檔案。
必要時,使用 ▲▼◄► 按鈕選取資料
夾,然後按 v 按鈕。
使用 ▲▼◄► 按鈕選取要觀看或播放
的檔案,然後按 v 按鈕。.
5.
按 返回 按鈕一或多次結束目前畫面、
結束資料夾或回到主畫面。 按 結束
按鈕可直接回到主畫面。
6.
1
AUDIO
HOME
SUBTITLE
將會出現一個列出裝置內容的畫面。
根據內容的排列方式,您將看到資料夾
及/或個別檔案。
必要時,使用 ▲▼◄► 按鈕選取資料
夾,然後按 v 按鈕。
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
15
與播放相關的按鈕
在「搜尋」、「慢動作播放」和「逐個動作
播放」模式下,播放機不會播放聲音。
• 要恢復正常速度播放,請按 6 按鈕。
6 按鈕
開始播放。
5 按鈕
停止播放。
7 按鈕
暫停播放。
快動作播放
在播放期間,按 3 或 4
按鈕。
每次按 3 或 4 按鈕,播
放速度都會變更。
慢動作播放
在暫停模式中,按 4 按
鈕。
每次按 4 按鈕,播放速
度都會變更。
在暫停模式中,按 7 按
鈕。
逐個動作播放
每次按 7 按鈕,都會出現
新的一幀。
在播放期間,按 1 或 2
按鈕。
跳過動作播放 每次按 1 或 2 按鈕,
光碟都會移至上一個章節/
檔案或下一個章節/檔案。
使用光碟功能表、標題功能表、快顯
功能表和標題清單
DISC MENU 按 在播放期間,按此按鈕可
鈕
以啟動光碟功能表功能。
TITLE MENU
按鈕
在播放期間,按此按鈕可
以啟動標題功能表功能。
POPUP MENU
按鈕
在播放期間,按此按鈕可
以啟動快現標題功能表功
能。
跳過:在播放期間,按 1 或 2
按鈕移至播放清單的上一頁或下一
頁。
3
5 按鈕:停止曲目。
4
快速播放(僅限音頻 CD (CD-DA))
在播放期間,按 3 或 4 按鈕。
每次按 3 或 4 按鈕,播放速度
都會變更。
5
暫停:暫停曲目。
6
6 按鈕:播放當前選取的曲目。
控制音樂播放
您可以控制位於 Blu-ray、DVD、CD、USB、
或 電腦上的音樂內容的播放。
遙控器上用於播放音樂的按鈕
1
+
播放清單
AUDIO
HOME
SUBTITLE
5
6
數字按鈕:在播放清單播放期間,
按所需的曲目編號。
將會播放選取的曲目。
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
(
) 曲目
重複當前曲目。
) 全部
重複所有歌曲。
(
)隨機播式
隨機選項會隨機播放歌
曲。
播放清單
1.
若要移至「音樂清單」,請按 5 或
返回 按鈕。
「音樂清單」畫面將會出現。
00:08 / 05:57
2.
3.
CD
" 暫停
02:38
TRACK 003
TRACK 004
02:38
02:38
TRACK 006
TRACK 005
02:38
02:38
TRACK 008
TRACK 007
02:38
02:38
TRACK 010
TRACK 009
02:38
02:38
03:41
TRACK 005
TRACK 002
02:38
1/6
CD
c 選擇
( ) 跳轉到頁面 ' 返回
03:17
03:35
工具
' 返回
按 ◄► 按鈕選取 曲目, 全部, 隨機播式, 或
關閉.
按 v 按鈕。
TRACK 001
04:07
TRACK 004
1/2頁
音樂 TRACK 001
工具
TRACK 001
重複模式
? 關閉 \05:57
TRACK 002
< 調整 " 選擇 ' 返回04:27
TRACK 006
4
3
將以錄製的順序播放歌
曲。
(
1. 在播放清單播放期間,按 工具 按鈕。
TRACK 003
2
關閉
重複音頻 CD (CD-DA)/MP3
TRACK 001
1
16
2
2.
3.
按 ▲▼◄► 按鈕移至所需的曲目,然後
按 黃色 (C) 按鈕。鉤號將出現在該曲
目上。
重複此程序以選取其他曲目。
若要從清單移除曲目,請移至曲目,
然後再次按 黃色 (C) 按鈕。
將會取消曲目上的勾選標記。
4.
5.
6.
完成後,按 v 按鈕。
✎✎附註
若要變更播放清單,請按 返回 按鈕回
到 音樂清單。 重複步驟 2、3 和 4。
`` 視光碟或儲存裝置而定,Tools 功能
表可能不相同。
若要取消播放清單並回到主畫面,請按
返回 或 結束 按鈕。
`` 若要啟用背景音樂功能,相片檔案與
音樂檔案必須在相同的儲存媒體中。
不過,聲音品質可能會受到 MP3 檔案
的位元速率、相片的大小和編碼方法
影響。
✎✎附註
`` 可以在音頻 CD (CD-DA) 上建立最多
含有 99 個曲目的播放清單。
`` 如果您從播放清單中移除所有曲目,
然後按 v 按鈕,播放機將會列出並
播放光碟上的所有曲目。
`` 在全螢幕模式中,不能放大字幕和 PG
圖形。
附錄
故障排除
在請求服務前,請檢查下列內容。
問題
解決方案
遙控器無法執行任何操
作。
• 檢查遙控器裡的電池。它們可能需要更換。
• 在離播放機不超過 6.1 米的距離內操作遙控器。
• 取出電池,按住一個或多個按鈕幾分鍾以耗盡遙控器內部的
微處理器電池電量,以便進行重設。裝回電池,然後再次嘗
試操作遙控器。
• 在內部無光碟的情況下,按前面板上的 @ 按鈕 5 秒鐘以
上。所有設定將恢復為出廠設定。
• 在內部無光碟的情況下,按前面板上的 P 按鈕 5 秒鐘以上
無法播放光碟。
• 確定光碟安裝時,光碟的標籤面朝上。
• 檢查 Blu-ray 光碟/DVD 的區域代碼。
光碟功能表沒有出現。
• 請確定該光碟具有光碟功能表。
禁止訊息出現在螢幕
上。
• 按無效的按鈕時,此訊息就會出現。
• Blu-ray 光碟/DVD 軟體不支援此功能(例如,角度)。
• 您請求的標題、章節編號或搜尋時間超出範圍。
播放相片內容
您可以播放位於 Blu-ray, DVD、CD 或 USB
儲存裝置上的相片內容。.
使用 工具 功能表
在播放期間,按 工具 按鈕。
開始播放幻燈片
選取此項以開始播放幻燈
片。
背景音樂
選取此項可在觀看幻燈片
時收
聽音樂。
放大
選取此項以放大目前的圖
片。(最多放大 4 倍)
播放模式與「設定功能表」
選擇不同。
• 如果光碟沒有相應功能的編碼,則在「設定功能表」中選定
的功能可能不能正常工作。
旋轉
選取此項以旋轉圖片。
(這會順時針或逆時針旋
轉圖像。)
屏幕比例無法更改。
• Blu-ray 光碟/DVD 上的.Screen Ratio(螢幕比例) 是固定的。
• 這不是播放機運作失常。
資訊
顯示圖片資訊。
無音頻。
• 請確定您已經在 音頻 選項(音頻選項) 功能表中選擇了正確
的「數碼輸出」。
17
問題
屏幕一片空白。
Forgot password
解決方案
• 如果將 HDMI 輸出設定為電視不能支援的解析度(例如
1080p),則在電視上可能看不到圖片。
• 在內部無光碟的情況下,按前面板上的 @ 按鈕 5 秒鐘以
上。所有設定將恢復為出廠設定。
• 恢復出廠預設設定後,將會刪除所有使用者已儲存的 BD 資料。
• 在內部無光碟的情況下,按前面板上的 @ 按鈕 5 秒鐘以上。所有
的設定,包括密碼,將恢復為出廠設定。
除非絕對必要,否則不要使用此操作。
• 恢復出廠預設設定後,將會刪除所有使用者已儲存的 BD 資料。
畫面出現噪訊或失真
• 請確定光碟未弄髒或無刮痕。
• 清潔光碟。
無 HDMI 輸出。
• 檢查電視與播放機的 HDMI 插孔之間的連接。
• 檢查電視是否支援 576p/480p、720p、1080i 或 1080p HDMI
輸入解析度。
異常 HDMI 輸出屏幕。
• 如果畫面上出現雪花噪訊,則表示電視不支援 HDCP(高頻寬
數碼內容保護) 。
如果您遇到其他問題。
• 移到目錄,查找含有對當前問題解釋的使用手冊部分,然後
再次遵照程序操作。
• 如果問題仍然無法解決,請聯絡距您最近的 Samsung 授權服
務中心。
DLNA 功能
我可以看到透過 DLNA
共用的資料夾,但是看
不到檔案。
• DLNA 僅顯示視訊、相片和音樂檔案。不顯示其他類型的檔
案。
問題
解決方案
視訊播放斷斷續續。
• 檢查網絡是否穩定。
• 檢查網絡電纜是否正確連接,以及網絡是否超負荷。
播放機與電腦之間的
DLNA 連線不穩定。
• 同一個子網絡中的 IP 地址應該是唯一的。
如果不唯一,IP 干擾可能會導致此現象。
• 檢查是否啟用了防火牆。
若啟用,請停用防火牆功能。
BD-LIVE
無法連接到 BD-LIVE
伺服器。
• 使用「網絡狀態」功能測試網絡連接是否成功。
• 檢查是否將 USB 記憶體裝置連接至播放機。
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服務。
可以在「BD 資料管理」中檢查可用大小。
• 檢查「BD-Live 互聯網連接」選項是否設定為「允許 (所有)」。
• 如果上述所有原因都不正確,請與內容提供商聯絡或將播放
機更新為最新的韌體。
使用 BD-LIVE 服務時
發生錯誤。
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服
務。
可以在BD 資料管理中檢查可用大小。
✎✎附註
`` 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。
維修
如果您要與我們聯絡以維修播放機,則在下列情況下可能需要收取管理費:
1. 您致電工程師上門維修,但是產品無缺陷。
2. 您將裝置帶到維修中心維修,但是產品無缺陷。 我們在上門服務或開始修理播放機之前,我們將為您提供管理費用。
建議您通讀本使用手冊,在 www.samsung.com 上線上搜尋解決方案,或者與 Samsung 客戶
中心聯絡,再將播放機送修。
18
符合性和相容性聲明
規格
並非所有光碟都相容
1.0 公斤
尺寸
269 (寬) X 193 (深) X 39 (高) 毫米
工作溫度範圍
+5℃ 至 +35℃
工作濕度範圍
10 % 至 75 %
類型 A
USB 2.0
DC 輸出
最大 5V 0.5A
視訊
1080p, 1080i, 720p, 576p/480p
音頻
PCM, 位元流
-- 本播放機並不支援所有新的和現有的光碟格式版本。
數碼音頻輸出
同軸
-- 可能會對新的和現有的光碟格式進行修正、變更、更新、改良及/或補充;
乙太網路
100BASE - TX 端子
-- 一些光碟的生產方式使得在播放期間只允許特定或有限的操作和功能;
一般
USB
HDMI
音頻輸出
網絡
• 根據下面所述的限制及本手冊中(包括本手冊中的「光碟類型和特性」一節) 說明的限
制,可以播放的光碟類型有: 預先錄製的商業 BD-ROM、DVD-VIDEO 和音頻 CD (CD-DA)
光碟;BD-RE/-R、DVD-RW/-R 光碟;以及 CD-RW/-R 光碟。
重量
-- 不支援等於或低於 10Mbps 的網路速度。
-- 設計和規格可能會隨時變更,恕不另行通知。
-- 如需電源和功耗資訊,請參閱貼在播放機上的標籤。
-- 重量和尺寸均為近似值。
• 上述光碟以外的光碟及/或不設計為使用本播放機播放。 並且由於下面提供的一個或多個
原因,上述的一些光碟也可能無法播放。
• Samsung 不能保證本播放機可以播放帶有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVD-RW/-R、
DVD+RW/+R 和 CD-RW/-R 標誌的每張光碟,並且本播放機可能不能回應所有操作指令或操
作每張光碟的所有功能。下面列出造成這些問題和其他光碟相容性以及播放機操作新格式
或現有格式的光碟問題的可能原因:
-- Blu-ray 是新的且不斷發展的格式,且本播放機可能無法操作 Blu-ray 光碟的所有功
能,因為一些功能可能是在生產本播放機後新增到 Blu-ray 光碟格式的選用附加功能,
並且某些可用的功能可能會延後提供。
-- 帶有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVD-RW/-R、DVD+RW/+ R 和 CD-RW/-R 標誌的一
些光碟可能仍然是非標準化光碟;
-- 一些光碟可能無法播放,具體視其實體狀態或錄製條件而定;
-- 在製作 Blu-ray 光碟、DVD 軟件及/或生產光碟時可能會出現問題和發生錯誤;
-- 本播放機的操作方式與其他標準 DVD 播放機或其他 AV 裝置不同。和/或
-- 出於本使用手冊說明的原因和 SAMSUNG 客戶服務中心發現和公佈的其他原因。
• 如果您遇到光碟相容性或播放機操作問題,請與 SAMSUNG 客戶中心聯絡。
也可以與 SAMSUNG 客戶中心聯絡以取得本產品的可能更新。
• 有關播放限制以及光碟相容性的其他資訊,請參閱本使用手冊的「預防措施」、「在閱讀
使用手冊之前」和「光碟類型和特性」等章節。
19
• 對於 Blu-ray 光碟播放機前進式掃描輸出: 消費者應注意到,並不是所有的高清晰度電
視機都與此產品完全相容,與此產品的連接可能造成畫面失真。 如果出現前進式掃描畫面
的問題,建議使用者將連接轉換到「標準清晰度」輸出。 如果我們的電視機與本產品出現
相容問題,請與 SAMSUNG 客戶服務中心聯絡。
複製保護
• 因為已核准將 AACS(進階儲存內容系統)用作 Blu-ray 光碟格式的內容保護系統(類似於
對 DVD 格式使用 CSS(內容加擾系統)),對受 AACS 保護的內容存在播放、類比信號輸出
等特定限制。
本產品的操作和對本產品的限制可能會因購買時間而異,因為在生產本產品之後,AACS 可能
會採用及/或變更這些限制。 此外,BD-ROM 標記和 BD+ 另用作 Blu-ray 光碟格式的內容保
護系統,它施加特定限制,包括對 BD-ROM 標記及/或 BD+ 受保護內容的播放限制。 若要取
得 AACS、BD-ROM 標記、BD+ 或本產品的相關詳細資訊,請與 SAMSUNG 客戶中心聯絡。
• 許多 Blu-ray/DVD 都進行了編碼以達到複製保護的目的。 因此,僅直接將您的播放機與
您的電視相連接,而不要連接到 VCR。 與 VCR 連接將導致受版權保護之 Blu-ray 光碟/
DVD 光碟的畫面失真。
• 在美國著作權法和其他國家/地區的著作權法保護下,如果未經授權使用、顯示、散佈或修訂
電視節目、錄影帶、Blu-ray 光碟、DVD 和其他材料,則您必須承擔民事及/或刑事責任。
• Cinavia 聲明:本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲
道的未經授權副本。當偵測到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放
或複製動作將會中斷。
Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www.
cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明
信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA,
92138, USA.
本產品採用 Verance Corporation 許可的專利技術,並且受美國專利 7,369,677 和其
他在美國及全球已頒發或正在申請的專利保護,並且此類技術的特定方面受版權和商業
機密保護。Cinavia 是 Verance Corporation 的商標。Copyright 2004-2010 Verance
Corporation.All rights reserved by Verance.禁止還原工程或反向組譯。
20
網絡服務免責聲明
透過本裝置存取的所有內容和服務屬於協力廠商,並且受版權、專利權、商標和/或其他智慧
財產法保護。 提供此等內容僅供個人非商業使用。 除內容所有者或服務提供者授權的方式之
外,不得任何其他方式使用任何內容或服務。 除非適用的內容所有者或服務提供者事先明確
授權,您不得修改、複製、重新發佈、上載、張貼、傳送、翻譯、銷售、建立衍生作品、開發
或以任何方式或媒體散佈透過本裝置顯示的任何內容或服務。
協力廠商內容和服務「按原樣」提供。 對於此處提供的內容,SAMSUNG 不提供針對任何目的
明示或暗示的保證。 SAMSUNG 明確拒絕任何暗示的保證,包括但不限於適銷性或適合特定用
途的保證。 SAMSUNG 不保證透過本裝置可取得之內容或服務的準確性、有效性、及時性、合
法性或完整性;在任何條件下,包括疏忽所致,無論是合同行為還是侵權行為,對於您或協
力廠商使用內容或服務導致的任何直接、間接、偶然、特殊或附帶性毀損,及律師費、開支
或任何其他與此有關的損失或包含其中的資訊,SAMSUNG 將不承擔賠償責任,即使 SAMSUNG
事先已被告知發生此等損失的可能性。
協力廠商服務隨時會中止或中斷,Samsung 不表示或保證任何內容或服務的可用期限。 對於
協力廠商透過網絡和傳輸設備傳送的內容和服務,Samsung 無法控制。 在不影響本免責聲明
一致性的前提下,對於透過本裝置取得之任何內容或服務的中斷或中止,Samsung 明確拒絕
承擔任何責任。
Samsung 也不對內容和服務的相關客戶服務承擔責任。 任何與內容或服務相關的無服務問題
或要求,都應該直接轉至各自內容和服務的提供者。
• Oracle 和 Java 是 Oracle 及/或其子公司的註冊商標。 其他名稱可能
是其各自所有者的商標
授權
• 在 Dolby Laboratories 的授權下製造。 Dolby 和雙 D 標誌是 Dolby
Laboratories 的商標。
• 開源軟件許可注意事項
-- 使用開源軟件時,產品功能表上會有 Open Source Licenses(開源軟件許可) 項目。
• 在以下美國專利號的授權下製造:5,956,674; 5,974,380; 6,487,535 和其
他在美國及全球已頒發或正在申請的專利。DTS、符號及 DTS 和符號一起是
DTS, Inc. 的註冊商標,並且 DTS 2.0+Digital Out 是 DTS, Inc. 的商
標。產品包括軟體。© DTS, Inc. All Rights Reserved.
• Blu-ray Disc™、Blu-ray™ 和標誌是 Blu-ray Disc Association 的商標。.
2.0+Digital Out
• DivX
-- 關於 DIVX 視訊: DivX® 是 Rovi Corporation 子公司 DivX, LLC
建立的數位視訊格式。
本產品是正式通過 DivX 認證®、可以播放 DivX 視訊的產品。
請造訪 www.divx.com 以瞭解詳細資訊以及取得用於將檔案轉換為 DivX 視訊的軟件工
具。
-- 關於 DIVX 視訊點播: 本產品是通過 DivX® 認證的裝置,必須註冊才能播放 DivX 視
訊點播 (VOD) 電影。 若要取得註冊碼,請在裝置的設定功能表中找到 DivX VOD 區
段。 請造訪 vod.divx.com,以取得如何完成註冊的詳細資訊。
-- 向 DivX® 認證以播放高達 HD 1080p 的 DivX® 視訊,包括優質內容。
DivX®、DivX Certified® 及相關聯的標誌是 Rovi Corporation 或其子公司的商標,並
在授權下使用。
受下列一個或多個美國專利權保護: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
• DLNA®、DLNA 標誌及 DLNA CERTIFIED® 是 Digital Living Network
Alliance 的商標、服務標記或憑證標記。
• HDMI、HDMI 標誌和 High-Definition Multimedia Interface 是
HDMI Licensing LLC 在美國和其他國家/地區的商標或註冊商標。
21
聯絡 SAMSUNG WORLD WIDE
如果您有任何關於 Samsung 產品的問題或意見,請聯絡 SAMSUNG 客戶服務中心。
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Area
` Middle East
U.A.E
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
Senegal
Cameroon
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
Contact Centre 
Web Site
800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
AK68-02288A-00
Download PDF

advertising