Samsung | HW-J7501R | Samsung 320W 4.1Ch Curved Soundbar HW-J7501R Quick start guide

HW-J7500R
HW-J7501R
User Manual
For further information, refer to the Web Manual.
Web manual : www.Samsung.com → Support →
Product name search → HW-J7500R or HW-J7501R
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Class II product : This symbol indicates that it does not require a safety connection to electrical
earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on
the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all times.
· 2 · English
PRECAUTIONS
1. Ensure that the AC power supply in your house complies with the power requirements listed on the
identification sticker located on the rear of your product. Install your product horizontally, on a suitable base
(furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not
covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is
designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the
unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could
damage the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the
unit to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong
magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your
product is not intended for industrial use. It is for personal use only. Condensation may occur if your product
has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
5. The battery used with this product contains chemicals that are harmful to the environment.
Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat,
direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the
battery is replaced incorrectly. Replace only with the same or equivalent type.
WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
The remote control supplied withthis product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close securely, stop using the product and keep it away from
children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
· 3 · English
CHECKING THE COMPONENTS
Soundbar Main Unit
2 AC/DC Adapter
Remote Control /
Battery
Subwoofer
3 Power Cord
HDMI Cable
1 Power Cord
c Use Cat 7 (*STP Type) cable for the connection.
* Shielded Twist Pair
CONNECTING ELECTRICAL POWER
Use the power components (1, 2, 3) to connect the power supplies in the following order:
Subwoofer  Soundbar Main Unit
c For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of Soundbar main unit)
Rear of the Soundbar Main Unit
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
Rear of Subwoofer
1 Power Cord
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
POWER
3 Power Cord
POWER
Connecting electrical power
DC 24V
DC 24V
(Power Jack)
2 AC/DC Adapter
c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is
hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter
and cause the Adapter to malfunction.
· 4 · English
CONNECTING THE SUBWOOFER TO THE SOUNDBAR
MAIN UNIT
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.
So
Sou
Soundbar
Main Unit
Subwoofer
The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main
unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the
subwoofer stops blinking and glows blue continuously.
c If the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not
automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.
c Important: Before you begin, put the battery into the remote. See page 17 for instructions.
POWER
1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the rear of the subwoofer for 5 seconds. The red indicator on the front of the
subwoofer turns off and the blue indicator flashes rapidly.
3. Press the
button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.
4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then
disappears.
ID SET
5. While the subwoofer's indicator is flashing blue, press the
the Soundbar main unit to turn on the Soundbar main unit.
button on your remote control or on the top of
6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
· 5 · English
CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 17 for instructions.
Method 1. Connecting with a Cable
HDMI OUT
(TV-ARC)
Check the HDMI OUT (TV-ARC)
port of the Soundbar main unit.
Soundbar
HDMI Cable
Bottom of Soundbar
HDMI IN
(TV-ARC)
Check the (TV-ARC) at
HDMI IN port of your TV.
1. Connect the HDMI cable as in the picture above.
2. TV ARC appears on display of the product and TV sound is output.
TV ARC
c If TV sound is not output, press the
button on the top of your Soundbar or the SOURCE button on the
remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to
TV ARC and TV sound is output.
c If the Soundbar main unit display does not change to TV ARC, check the cable connections.
c You can conveniently control the volume of the Soundbar and interlock power supply.
· 6 · English
Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)
1. Turn on your Samsung TV and the Soundbar.
2. Select TV mode in your Soundbar display by pressing the
button on the top of the Soundbar or the
SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX → HDMI
→ BT → TV.)
3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote
control.
Samsung Audio Device detected.
Do you want to hear TV sound
through this device?
Yes
No
Select <Yes> with your TV remote control.
4. The Soundbar outputs TV sound.
c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device, and set Add New Device to ON. Then, try again.
c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the
volume with the Soundbar's remote or the TV's remote.
c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since
2012.
c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,
press the & button on your remote control for more than 5 seconds.
c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
c Do not place electronic devices or metallic objects on top of the product.
e.g., Wired/wireless router, set-top box, or modem.
c Placing the product on the floor may degrade wireless network performance, depending on the floor material.
· 7 · English
Method 3. Connecting to a Wireless Network
Installing the Samsung Multiroom App and Connecting Wirelessly
Wi-Fi SETUP
SPK ADD
AUX IN
LAN
HDMI IN
DC 24V
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
1. Press and hold the SPK ADD button on the rear of the
Soundbar for more than 1 second.
• There is a notification sound and the message
“ADD SPEAKER” appears on the Soundbar’s main
unit. Afterwards, the message “WIFI READY” appears
when standby-for-connection mode activates.
HDMI OUT OPTICAL IN
(TV-ARC)
To install Samsung Multiroom app for the first time, follow
the steps shown below.
Rear of Soundbar
2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.
Samsung
Multiroom
Internet
Wireless Router
Smart Device
3. Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).
4. Launch the Samsung Multiroom app.
Samsung
Multiroom
Android
iOS
Samsung Multiroom app
5. Complete the initial settings by following the instructions on the app screen.
Complete the settings
by following the
instructions on the
Samsung Multiroom
app screen.
Start screen
Entering the password
for the wireless router
Speaker connection
complete
c You must enter the password of your wireless router to connect your Soundbar to your wireless network
through Samsung Multiroom app.
c If your wireless router has no designated password, the app completes the initial settings without asking you
to enter a password.
· 8 · English
If the Samsung Multiroom app is already installed for use with
another multiroom audio device, follow these steps to add the
Soundbar.
Wi-Fi SETUP
HDMI OUT OPTICAL IN
(TV-ARC)
Adding the Soundbar to an Existing Multiroom Audio System
SPK ADD
AUX IN
LAN
HDMI IN
DC 24V
DC 24V
Wi-Fi SETUP
SERVICE
SPK ADD
1. Press and hold the SPK ADD button on the rear of the
Soundbar for more than 1 second.
• There is a notification sound and the message
“ADD SPEAKER” appears on the Soundbar’s main
unit. Afterwards, the message “WIFI READY” appears
when standby-for-connection mode activates.
Rear of Soundbar
2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.
Samsung
Multiroom
Internet
Wireless Router
Smart Device
3. Launch the Samsung Multiroom app.
4. Touch
to go to the list of all speakers.
5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.
Complete the settings
by following the
instructions on the
Samsung Multiroom
app screen.
Start screen
Selection of network
Speaker addition
complete
c To connect a different network, select No.
You must enter the password of your wireless router to connect your Soundbar to your wireless network
through the Samsung Multiroom app.
If your wireless router does not have a designated password, the app completes the initial settings without
asking you to enter a password.
· 9 · English
Connecting the Soundbar to your Samsung Smart TV
You can connect your TV to the Soundbar through a wireless network and enjoy the TV sound.
c Important: Make sure that the TV and Soundbar are connected to the same network.
(How to check your Samsung TV network : Home menu  Network  Network Status)
Configuring Settings from your Samsung Smart TV
c To play sound via the Soundbar, make sure that your TV model supports the Multiroom feature
(Samsung Smart TVs released after 2014).
c If the TV is disconnected from the wireless network due to a change to the input source of the Soundbar,
use the TV menu to re-establish the connection.
 For TVs released in 2016
1. Home menu  Settings (
)  Sound  Sound Output  Select [Samsung] HW-Jxxxx (Wi-Fi)
2. TV sound is output.
 For TVs released in 2015
1. Home menu  Sound  Speaker List  Select [Samsung] HW-Jxxxx (Wi-Fi)
2. TV sound is output.
 For TVs released in 2014
1. Home menu  Sound  Speaker Settings  Select Multiroom Link - Settings  Soundbar+Surround
2. From the Soundbar position, select "J7500" and select "OK".
3. Home menu  Sound  Speaker Settings  Select TV Sound Output  Multiroom Link
Speaker Settings
Multiroom Link
TV Sound Output
TV Speaker
• TV Installation Type
TV SoundConnect
• Samsung Audio Device List
• Add New Device
Multiroom Link
• Settings
Soundbar+Surround
Multiroom Link
Stand
Soundbar
On
[Samsung] HW-J7500 c
Soundbar+Surround
Bluetooth headphone
• Bluetooth headphone List
OK
[Samsung] HW-J7500
Don't Use
OK
4. TV sound is output.
· 10 · English
Volume Level
Speaker Test
Edit Na
Connecting Samsung Multiroom Audio System to the Surround
You can enjoy three-dimensional sound in surround mode after connecting two Multiroom Audios and a
Soundbar.
c Surround connection between a Multiroom Audio and a Soundbar is unavailable.
1. Touch
2. Touch
to go to the list of all speakers.
on the right of the Soundbar model name.
3. Touch Surround Setup. Select Done after dragging the speaker to the desired location.
4. Surround connection is completed.
Soundbar
c Refer to the web manual for connection between the TV and the surround.
· 11 · English
CONNECTION VIA BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
c It is not possible to connect multiple Bluetooth devices at the same time.
Connect
Bluetooth device
1. Press the
button on the top of the Soundbar or the SOURCE button on the remote control to select BT.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select "[Samsung] HW-Jxxxx" from the list.
• When the connection is established between the Soundbar and Bluetooth device, the front display
window of the Soundbar displays [Bluetooth device name] → BT.
4. Play music on the connected device.
[If failed to connect to the Bluetooth device / If device searching is needed again]
• Delete the previous "[Samsung] HW-Jxxxx" found by the Bluetooth device and have it search for the
Soundbar again.
c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 10 meters.
c The Soundbar automatically turns off after 15 minutes in the Ready state.
c The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be
kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
Disconnecting the Soundbar from the Bluetooth device
Press the SOURCE button on the remote control or the
another mode or turn off the Soundbar.
button on the product's top to switch from BT to
• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
· 12 · English
CONNECTING TO AN EXTERNAL DEVICE
You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by
connecting them to your Soundbar.
HDMI Cable
HDMI OUT
(TV-ARC)
HDMI IN
HDMI IN
Soundbar
HDMI Cable
HDMI OUT
External
Device
Bottom of Soundbar
1. Connect the HDMI cable as in the picture above.
2. Press the
button on top of your Soundbar or the SOURCE button on your remote control to select
HDMI mode.
3. The Soundbar shows HDMI on its display and output sound.
· 13 · English
SOFTWARE UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
INSTALLING THE WALL
MOUNT
Installation Precautions
Auto Update
• Install on a vertical wall only.
c To use the Auto Update function, the Soundbar
must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if its power cord is disconnected or the
power is cut off. If the power is cut off, turn on the
Soundbar and reconnect it.
• Check the strength of the wall. To install the
Soundbar system on a wall that may not bear the
Soundbar main unit weight, reinforce the wall
before installation. If this is not possible, install the
system on another wall, one stable enough to bear
the weight of the Soundbar main unit.
Updating with USB
• Purchase and use the fixing screws or anchors
appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.). If possible, fix the
support screws into wall studs.
HDMI OUT OPTICAL IN
(TV-ARC)
The automatic update function is enabled on the
Soundbar by default. Automatic firmware updates are
searched for and performed if the Soundbar is
connected to the Internet, irrespective of whether it is
turned on or off.
• Do not install the Soundbar system in a location
with high temperature and/or humidity. Install the
system on a stable wall that can bear the weight of
the Soundbar main unit.
AUX IN
LAN
HDMI IN
• Purchase wall mounting screws according to the
type and thickness of the wall you will mount the
Soundbar on.
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
SERVICE
– Diameter : M5
– Length: 35 mm or longer recommended.
• Connect cables from the unit to external devices
before you install it on the wall.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware update
stored on it to the USB port on your Soundbar.
• Make sure the unit is turned off and unplugged
before you install it. Otherwise, it may cause an
electric shock.
For more information about how to download update
files, go to the Samsung Electronics website at
(samsung.com/sec)  search for the model name 
download the firmware from the customer support
menu option. The option name can vary.
· 14 · English
HDMI IN
LAN
AUX IN
DC 24V
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
Holder-Fix Mount
(for wall-mount fixing)
SPK ADD
Wall-Mount Bracket
Wi-Fi SETUP
Holder-Screw 2
(for Soundbar main unit
fixing) (4 EA)
SERVICE
Holder-Screw 1 (4 EA)
HDMI OUT OPTICAL IN
(TV-ARC)
3. Fix Holder-Screw 1 (4 EA) and Holder-Screw 2
(for Soundbar main unit fixing) (4 EA) into the holes
of the Soundbar tightly as shown in the illustration.
For Soundbar Main Unit (Wallmount
Components)
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
1. Place the Soundbar as shown in the illustration,
ensuring that none of the buttons touch the
surface it is lying on.
4. Insert the Wall-Mount Screws into the 3 holes
one by one to fix the Wall-Mount Bracket on the
wall.
Wall
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
2. If the Holder-Foot (3 EA) and Holder-Support
(2 EA) are attached, remove them.
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
c Recommended screw : M5
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
Holder-Foot
Holder-Support
· 15 · English
5. Mount the Soundbar on the Wall-Mount Bracket
in order of the following illustration (1  2).
1
2
6. Fix the Holder-Fix Mount (for wall-mount fixing) to
join the Wall-Mount Bracket with the Soundbar.
c Wall-Mount Screws are not provided.
c Since different types of wall-mount screws are
required depending on your wall, you should
check your wall before installation and purchase
the appropriate wall-mount screws to use.
· 16 · English
REMOTE CONTROL BUTTONS & FEATURES
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.


Turns the Soundbar on and off.
Power
Press to select a source connected to the Soundbar.
SOURCE
Sets the volume temporarily to 0.
Press again to cancel.
Mute
Adjusts the volume level of the unit.
Volume
· 17 · English

Play / Pause
Press the & button to pause a music temporarily.
Press the & button again to play the selected music.
Selects the next file.
Skip Forward
Selects the previous file.
Skip Back
The Repeat function is available only when playing back music from Songs on
phone or DMS of Samsung Multiroom app.
Repeat
• OFF-REPEAT : Cancels Repeat Playback.
• TRACK-REPEAT : Plays a track repeatedly.
• ALL-REPEAT : Plays all tracks repeatedly.
The Surround Sound function adds depth and a sense of space to sound.
When this button is pressed, ON or OFF is repeatedly alternated.
Surround Sound
SOUND
CONTROL
You can select from TREBLE, BASS or AUDIO SYNC.
• To control the volume of the treble or bass sound, select TREBLE or BASS in
Sound Settings, and then adjust the volume between -3~+3 by using the
,
buttons.
• If the video and audio between the TV and your Soundbar are not synchronized,
select AUDIO SYNC in Sound Settings, and then set audio delay between 0~300
milliseconds by using the
,
buttons.
You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,
MOVIE, and NIGHT.
SOUND EFFECT c NIGHT Mode
When changing a channel or music source, the volume difference between different
music input sources is automatically adjusted to be suitable for listening.
You can turn the Anynet+ and Auto Power Link on or off.
The Anynet+ and Auto Power Link work in reverse to each other.
Anynet+
• Anynet+: if connected through HDMI cable, you can control your Soundbar with
the Samsung TV remote control.
• Auto Power Link: the Soundbar is automatically turned on when turning on the
TV connected through optical input.
You can adjust the subwoofer volume between -12, or -6~+6 levels.
WOOFER
You can enjoy internet radio through Streaming Music.
STREAMING
MUSIC
You can select your desired station from 3 internet radio stations by default.
To use Streaming Music function, you should connect your Soundbar to a network.
· 18 · English
TROUBLESHOOTING
The red LED on the subwoofer blinks and the
subwoofer is not producing sound.
Before seeking assistance, check the following.
Your subwoofer may not be connected to the
Soundbar main unit.
Try to connect your subwoofer again.
See page 5.
The unit will not turn on.
Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
The subwoofer drones and vibrates noticeably.
A function does not work when the button is
pressed.
Try to adjust the vibration of your subwoofer.
Press the WOOFER button on your remote
control to adjust its value (between -12, -6 ~ +6).
Is there static electricity in the air?
Disconnect the power plug and connect it again.
Sound is not produced.
LICENCE
Is the Mute function on?
Press the
(Mute) button to cancel the function.
Is the volume set to minimum?
Adjust the Volume.
The remote control does not work.
Is the battery drained?
Replace with new battery.
Is the distance between the remote control and
Soundbar main unit too far?
Move the remote control closer to the Soundbar
main unit.
The TV SoundConnect (TV pairing) failed.
Does your TV support TV SoundConnect?
TV SoundConnect is supported by some
Samsung TVs released from 2012 on. Check
your TV to see if it supports TV SoundConnect.
Is your TV firmware the latest version?
Update your TV with the latest firmware.
Does an error occur when connecting?
Contact the Samsung Call Centre.
Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection,
press and hold the & button for 5 seconds.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS Licencing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0
Channel is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licencing LLC in the United States and other
countries.
• The Spotify Software is subject to third party
licences found here : www.spotify.com/connect/
third-party-licenses.
• For more information about Spotify Connect,
please visit www.spotify.com/connect
· 19 · English
OPEN SOURCE LICENCE NOTICE
For further information on Open Sources used in this product, please visit the website:
http://opensource.samsung.com
IMPORTANT NOTE ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
SPECIFICATIONS
Weight
GENERAL Dimensions
(W x H x D)
AMPLIFIER
Soundbar Main Unit
4.0 kg
Subwoofer
(PS-WJ7500R / PS-WJ7501R)
6.8 kg
Soundbar Main Unit
1230.0 x 47.5 x 170.0 mm
Subwoofer
(PS-WJ7500R / PS-WJ7501R)
452.0 x 335.0 x 154.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Rated Output
Power
Soundbar Main Unit
20W x 8, 8 ohm, THD≦10%
Subwoofer
(PS-WJ7500R / PS-WJ7501R)
160W, 3 ohm, THD≦10%
• Nominal specification
– Design, specifications and App screen are subject to change without prior notice.
– Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached to the
product. (Label : Bottom of Soundbar main unit)
· 20 · English
安全資訊
安全警告
為防止電擊,請勿拆卸蓋板 (或背板)。
本機內部無使用者可以自行維修的零件。如需維修,請由專門的服務人員進行維修。
此符號表示內部存在高電壓。 以任何
形式接觸本產品的任何內部部件都很
危險。
注意
為防止電擊,
請勿打開
此符號表示本產品隨附有關操作和維
護的重要資料。
II 類產品:此符號表示不需要連接接地。
AC 電壓:此符號表示額定電壓的標記為 AC 電壓。
DC 電壓:此符號表示額定電壓的標記為 DC 電壓。
注意,使用時需參照說明指示:此符號指示用戶查閱使用者手冊以取得進一步的安
全相關資訊。
警告 : 請勿將本機暴露在雨中或潮濕場所,以免火災或電擊。
注意 : 為防止電擊,請將寬片插頭完全插入匹配的寬插槽。
• 本設備應始終連接到帶有保護地線連接的交流電插座。
• 設備與電源斷開連接時,必須將插頭從電源插座上拔出,因此電源插頭應隨時保持便於操作。
注意
• 請勿將水滴落或噴灑在設備上,不得在設備上放置裝有液體的物品,如花瓶。
• 要完全關閉本設備,須將電源插頭從牆上電源插座拔出。
因此,電源插頭應隨時保持便於操作。
· 2 · 繁體中文(香港)
注意事項
1. 請確保您家中的交流電源符合產品背面標示貼紙上的要求。請將產品安裝在水平,適當的基
座 (家具) 上,並在周邊留下足夠的通風空間 7~10 公分。確保通風孔未被堵塞。請勿將本設備
放在放大器或其他會發熱的設備上。本設備可供連續使用。要完全斷開設備的電源連接,請
從牆上電源插座上拔掉交流電插頭。如果長時間不使用設備,請拔下其電源插頭。
2. 在雷雨天氣時,請從牆上電源插座拔下交流電插頭。閃電造成的電壓峰值會損壞本設備。
3. 請勿將本設備直接在陽光下暴曬或暴露於其他熱源下。這可能導致本設備過熱而發生故障。
4. 本產品應避免接觸潮濕 (如花瓶) 以及過熱 (如壁爐) 或者會產生強磁或電場的設備。如果設備
發生故障,請從交流電源拔下電源線。本產品並非供工業使用,而是僅供個人使用。如果本
產品存放在低溫環境中,則可能會出現冷凝現象。如果在冬天將本設備運送到室內,則需要
等待大約 2 小時的時間,以便本機在使用前達到室內溫度。
5. 本產品使用的電池含有對環境有害的化學物質。請勿將電池作為普通生活垃圾棄置。
請勿將電池置於火中。請勿使電池短路,分解或過熱。如果沒有正確替換電池,可能會導致
危險。僅可使用同樣或相同類別的電池替換。
警告,請勿吞食電池,會造成化學灼傷危險
[遙控器隨附] 本產品包含鈕扣電池。
如果誤吞食鈕扣電池,則可能會在 2 小時內導致嚴重的內部器官灼傷,並且能會導致死亡。請將
新電池和用過的電池放置在兒童不能觸及的地方。如果電池盒隔室不能嚴密關閉,請停止使用該
產品並將其放置在兒童不能觸及的地方。如果您認為不慎吞食了電池或將電池置於體內部某個部
位,請立即就醫。
· 3 · 繁體中文(香港)
檢查元件
Soundbar 主設備
2 交流電/直流電
適配器
低音炮
遙控器 / 電池
3 電源線
HDMI 纜線
1 電源線
c使用 Cat 7(*STP 型)纜線進行連接。
* 屏蔽雙絞線
連接電源
使用電源元件 (1、2、3) 按以下次序接駁電源:低音炮  Soundbar 主設備
c電源和消耗功率,請參考本產品上的標籤。(標籤:Soundbar 主設備底部)
Soundbar 主設備背面
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
低音炮後面
1 電源線
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
POWER
3 電源線
POWER
連接電源
DC 24V
DC 24V
(電源插孔)
2 交流電/直流電適配器
c請確保交流電/直流電適配器平穩放在桌面上或地上。若您將交流電/直流電適配器的交流電源
線插口朝上懸掛,水或其他異物可能進入適配器而導致其無法正常工作。
· 4 · 繁體中文(香港)
將低音炮連接至 SOUNDBAR 主設備
您可以將低音炮連接至 Soundbar 主設備,以聆聽豐富的低音及較佳的聲音品質。
Soundbar 主設備
So
設備
備
低音炮
在開啟 Soundbar 主設備與低音炮時,它們應會自動連結 (無線連接)。當自動連接完成時,低音炮
前面的藍色指示燈將停止閃爍並長亮。
c若低音炮前面的指示燈顯示為紅色或閃爍的藍色,則表明低音炮未能自動連接。若出現這種情
況,請按照以下指示人工連接低音炮。
c重要說明:開始前,請將電池放入遙控器中。請參閱第 17 頁的指引。
POWER
1. 將 Soundbar 主設備和低音炮的電源線插入牆上的交流電插座。
2. 按低音炮背面的 ID SET 按鈕 5 秒鍾。低音炮前面的紅色指示燈熄滅,藍色指示燈快速閃爍。
3. Soundbar 主設備關閉時,按住遙控器上的
按鈕 5 秒。
4. Soundbar 主設備顯示螢幕上將顯示 ID SET 訊息,然後在短時間內消失。
ID SET
5. 當低音炮藍色指示燈閃爍時,按下遙控器或 Soundbar 主設備
主設備。
上方的按鈕以開啟 Soundbar
6. 當低音炮前面的指示燈停止閃爍並長亮,則連接完成。
c如果連接過程失敗,則藍色指示燈會不斷閃爍。 請到步驟 2,重新開始。
· 5 · 繁體中文(香港)
連接至電視機
使用或不使用纜線將 Soundbar 連接至電視後,您即可聆聽電視的聲音。
c重要說明:開始前,請將電池放入遙控器中。請參閱第 17 頁的指引。
方法 1。使用纜線連接
HDMI OUT
(TV-ARC)
檢查 Soundbar 主設備上的
HDMI OUT (TV-ARC) 連接埠。
Soundbar
HDMI 纜線
Soundbar 的底部
HDMI IN
(TV-ARC)
檢查底電視的 HDMI IN
接口中的 (TV-ARC)。
1. 如上圖所示連接 HDMI 纜線。
2. TV ARC 會顯示在產品的顯示螢幕上,並且會輸出電視的聲音。
TV ARC
c若電視聲音沒有輸出,按下 Soundbar 上方的
按鈕或遙控器上的 SOURCE 按鈕,以選擇
Soundbar 主設備顯示螢幕上的 D.IN 模式。之後,D.IN 模式將變成 TV ARC,電視聲音為輸
出。
c若 Soundbar 主設備顯示未能變更為電視 ARC 模式,請檢查纜線連接。
c您可以方便地控制 Soundbar 的音量並聯鎖電源。
· 6 · 繁體中文(香港)
方法 2。TV SoundConnect (透過藍牙連接至三星電視)
1. 開啟您的三星電視和 Soundbar。
2. 在 Soundbar 顯示螢幕上選擇 TV 模式,可按住 Soundbar 上方的
按鈕或遙控器上的
SOURCE 按鈕。(將依次出現以下模式: D.IN → AUX → HDMI → BT → TV。)
3. 當電視螢幕上出現連接信息時,用電視遙控器選擇 <是>。
偵測到 Samsung 音頻裝置。
您要透過此裝置聆聽電視的聲
音嗎?
是
否
使用電視遙控器選取 <是>。
4. Soundbar 輸出電視聲音。
c若 TV SoundConnect 連接過程失敗,在電視聲音菜單中找到 SoundConnect,選擇 添加新裝
置,再將 添加新裝置 設置為 打開。然後再試一次。
c若透過 TV SoundConnect 將 Soundbar 與電視連接,您則可以方便地用 Soundbar 遙控器或電
視遙控器控制音量。
c僅在 2012 年後發行的數款 Samsung 電視產品上有提供 TV SoundConnect (Soundshare) 功
能。
c如果您要中斷與電視的現有連接並與另一部電視建立新連接,請按遙控器上的 & 按鈕超過
5 秒鐘。
c在 TV SoundConnect 模式下,Soundbar 不能與其他藍牙裝置配對。
c請勿將電子裝置或金屬物體放在產品上。
例如,有線/無線路由器、機頂盒或數據機。
c將產品放在地板可能會令無線網絡效能下降,這視乎地板物料而定。
· 7 · 繁體中文(香港)
方法 3。連接到無線網絡
安裝 Samsung Multiroom 應用程式並進行無線連接
Wi-Fi SETUP
SPK ADD
AUX IN
LAN
HDMI IN
DC 24V
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
1. 按住 Soundbar 背面的 SPK ADD 按鈕 1 秒以
上。
• 您會聽到通知音並從 Soundbar 主設備看到
「ADD SPEAKER」訊息。之後,當待命連接模
式啟動時,「WIFI READY」訊息便會顯示。
HDMI OUT OPTICAL IN
(TV-ARC)
如首次安裝 Samsung Multiroom 應用程式,請按照
以下步驟執行。
Soundbar 的背面
2. 將智慧型裝置 (手機、平板電腦等) 連接到無線路由器。
Samsung
Multiroom
互聯網
無線路由器
智慧型裝置
3. 在智慧型裝置 (手機、平板電腦等) 中安裝 Samsung Multiroom 應用程式。
4. 啟動 Samsung Multiroom 應用程式。
Samsung
Multiroom
Android
iOS
Samsung Multiroom 應用程式
5. 按照應用程式畫面上的說明操作,完成初始設定。
按照 Samsung
Multiroom 應用程
式畫面上的說明操
作,完成設定。
開始畫面
輸入無線路由器的密碼
成功連接揚聲器
c您應該輸入無線路由器的密碼以透過 Samsung Multiroom 應用程式將 Soundbar 連接到無線網絡。
c如果無線路由器未指定密碼,則完成初始設定時不會要求您輸入密碼。
· 8 · 繁體中文(香港)
若 Samsung Multiroom 應用程式已安裝,並與另一
部多房間音響裝置配撘使用,請按照以下步驟新增
Soundbar。
Wi-Fi SETUP
HDMI OUT OPTICAL IN
(TV-ARC)
將 Soundbar 新增到現有的 Multiroom Audio 系統
SPK ADD
HDMI IN
DC 24V
AUX IN
LAN
1. 按住 Soundbar 背面的 SPK ADD 按鈕 1 秒以上。
• 您會聽到通知音並從 Soundbar 主設備看到
「ADD SPEAKER」訊息。之後,當待命連接模
式啟動時,「WIFI READY」訊息便會顯示。
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
Soundbar 的背面
2. 將智慧型裝置 (手機、平板電腦等) 連接到無線路由器。
Samsung
Multiroom
互聯網
無線路由器
智慧型裝置
3. 啟動 Samsung Multiroom 應用程式。
4. 觸摸
檢視所有揚聲器的清單。
5. 在應用程式中選擇 More > Add New Speaker,然後依照應用程式螢幕上的說明操作。
按照 Samsung
Multiroom 應用程式
畫面上的說明操
作,完成設定。
開始畫面
網路選取
成功加入揚聲器
c如要連線至另一個網路,選擇 No。
您應該輸入無線路由器的密碼以透過 Samsung Multiroom 應用程式將 Soundbar 連接到無線網絡。
如果無線路由器未指定任何密碼,則完成初始設定時不會要求您輸入密碼。
· 9 · 繁體中文(香港)
將 Soundbar 連接至您的 Samsung Smart TV
您可以透過無線網絡將電視連接到 Soundbar,以欣賞欣賞電視的聲音。
c重要說明:確定 TV 和 Soundbar 已連接至相同網路。
(檢查 Samsung TV 網路的方法: 首頁菜單  網絡  網絡狀態)
在 Samsung Smart TV 上配置設定
c如要透過 Soundbar 播放聲音,請確保您的電視型號支援 Multiroom 功能 (於 2014 年後推出的
Samsung Smart TV)。
c若電視因更改 Soundbar 的輸入來源而從無線網絡中斷,可透過電視菜單重新連線。
 對於 2016 年推出的電視
)  音效  音效輸出  選擇 [Samsung] HW-Jxxxx (Wi-Fi)
1. 首頁菜單  設定 (
2. 輸出電視聲音。
 對於 2015 年推出的電視
1. 首頁菜單  音效  揚聲器列表  選擇 [Samsung] HW-Jxxxx (Wi-Fi)
2. 輸出電視聲音。
 對於 2014 年推出的電視
1. 首頁菜單  音效  揚聲器設定  選擇 Multiroom Link - 設定  Soundbar+Surround
2. 在 Soundbar 位置,選擇「J7500」,然後選擇「確定」。
3. 首頁菜單  音效  揚聲器設定  選擇 電視音效輸出  Multiroom Link
揚聲器設定
Multiroom Link
電視音效輸出
電視揚聲器
• 電視安裝類型
TV SoundConnect
• Samsung 音頻裝置清單
• 新增裝置
Multiroom Link
• 設定
Soundbar+Surround
Multiroom Link
直立式
Soundbar
開啟
[Samsung] HW-J7500 c
Soundbar+Surround
不使用
藍牙耳機
• 藍牙耳機清單
確定
[Samsung] HW-J7500
確定
音量大小
4. 輸出電視聲音。
· 10 · 繁體中文(香港)
揚聲器測試
名稱編
將 Samsung Multiroom 音響系統連接至環繞聲揚聲器
將兩部 Multiroom 音訊裝置和 Soundbar 連接,您便可以在環繞聲模式下享受 3D 音效。
c不支援 Multiroom 音響和 Soundbar 的環繞聲連接。
1. 觸摸
檢視所有揚聲器的清單。
2. 輕觸 Soundbar 型號名稱右方的 。
3. 輕觸 Surround Setup。將揚聲器拖動至理想位置,然後選擇 Done。
4. 環繞聲連接已完成。
Soundbar
c參閱網上手冊,進一步瞭解電視和環繞聲揚聲器的連接。
· 11 · 繁體中文(香港)
透過藍牙連接
您可以連接一個藍牙裝置到 Soundbar 並欣賞有立體聲音效果的音樂,一切都是無線的!
c您無法同時連接多部 藍牙 裝置。
連接
藍牙裝置
1. 按下 Soundbar 上方的
按鈕或遙控器上的 SOURCE 按鈕,以選擇 BT。
2. 在要連接的藍牙裝置上選擇藍牙功能表。(請參閱藍牙裝置的使用說明書。)
3. 從該清單中選擇 「[Samsung] HW-Jxxxx」。
• Soundbar 和藍牙裝置建立連線後,Soundbar 的前方顯示螢幕會顯示
[藍牙裝置名稱] → BT。
4. 在連接的裝置上播放音樂。
[若無法連接至藍牙裝置,或系統需要再次搜尋裝置]。
• 刪除藍牙裝置先前找到的「[Samsung] HW-Jxxxx」,並重新搜尋 Soundbar。
c在連接藍牙裝置時,如果系統要求您提供 PIN 碼,請輸入 <0000>。
c在藍牙連接模式下,如果 Soundbar 與藍牙裝置之間的距離超出 10 公尺,藍牙連線將會中斷。
cSoundbar 會在處於 就緒 狀態 15 分鐘後自動關閉。
c在下列情況下,Soundbar 可能無法正確執行藍牙搜尋或連接:
– 如果 Soundbar 周圍具有強電場。
– 如果多個藍牙裝置同時與 Soundbar 配對。
– 如果藍牙裝置已關閉,沒有就位或發生故障。
c電子裝置可能會導致無線電干擾。發放電磁波的裝置必須與 Soundbar 主設備保持遠距離,當
中包括微波爐、無線 LAN 裝置等。
從藍牙裝置解除連接 Soundbar
按下遙控器上的 SOURCE 按鈕或產品上方的
Soundbar。
按鈕,以從 BT 模式切換至其他模式或關閉
• 連接的藍牙裝置將會等待一定的時間,獲得 Soundbar 的回應後再終止連線。
(中斷連接時間可能會視具體的藍牙裝置而不同)
· 12 · 繁體中文(香港)
連接至外部裝置
您可以將 Soundbar 與單個的外部裝置連接以享受音響效果,例如 BD 播放機/遊戲控制台/機頂盒
等。
HDMI 纜線
HDMI OUT
(TV-ARC)
HDMI IN
HDMI IN
Soundbar
HDMI 纜線
HDMI OUT
Soundbar 的底部
外部裝置
1. 如上圖所示連接 HDMI 纜線。
2. 按 Soundbar 頂部的
按鈕或遙控器上的 SOURCE 按鈕選擇 HDMI 模式。
3. Soundbar 會在它的顯示螢幕上顯示 HDMI 並輸出聲音。
· 13 · 繁體中文(香港)
軟件更新
安裝壁裝支架
三星以後可能會提供 Soundbar 的系統固件更
新。
安裝注意事項
• 只能安裝在垂直的牆壁上。
自動更新
Soundbar 的自動更新功能預設為啟用。無論
Soundbar 是否已開啟,若 Soundbar 已連線至
互聯網,系統便會搜尋和執行自動韌體更新。
c若要使用自動更新功能,必須將 Soundbar
連接至互聯網。
如果 Soundbar 的電源插頭被拔下或它的電
源中斷,它的 Wi-Fi 連線將會斷開。
若電源斷開,開啟 Soundbar 再重新連接。
使用 USB 更新
• 不要在高溫及/或高濕度的地方安裝
Soundbar 系統。請在穩定且可承受
Soundbar 主設備重量的牆壁上安裝系統。
• 檢查牆壁的承受力。若要在可能無法承受
Soundbar 主設備重量的牆壁上安裝系統,
請在安裝前加固牆壁。若無法加固牆壁,請
在另一幅穩定且可承受 Soundbar 主設備重
量的牆壁上安裝系統。
• 購買並使用適合您的牆壁類型 (灰泥板、鐵
板、木板等) 的固定螺絲或錨凹。若有可
能,請將支撐螺絲釘入牆柱中。
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
• 根據您要安裝 Soundbar 之牆壁的類型及厚
度,購買適用的牆壁安裝用螺釘。
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
– 直徑: M5
– 長度: 建議 L 35 毫米或更長
SERVICE
• 在安裝到牆壁上之前,將纜線從設備連接至
外部裝置。
• 在安裝之前,確保關閉設備電源並拔下電源
插頭。否則可能導致電擊。
有更新可用時,若要更新固件,請將儲存有固
件更新的 USB 裝置連接至 Soundbar 上的
USB 接口。
如需進一步瞭解下載更新檔案的方法,請前往
Samsung Electronics 網站 (samsung.com/sec)
 搜尋型號名稱  從客戶服務選單選項中下
載韌體。選項名稱可能有所不同。
· 14 · 繁體中文(香港)
支架固定螺釘
(用於固定牆上安裝支架)
HDMI OUT OPTICAL IN
(TV-ARC)
墻壁安裝支架
HDMI IN
支架螺釘 2
(用於 Soundbar 主設備
固定) (4 顆)
AUX IN
支架螺釘 1 (4 顆)
3. 按照圖示,將 支架螺釘 1 (4 顆) 和 支架螺
釘 2 (用於 Soundbar 主設備固定,4 顆) 緊
緊固定在 Soundbar 上的孔中。
LAN
用於 Soundbar 主設備 (掛牆元件)
DC 24V
Wi-Fi SETUP
SPK ADD
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
SERVICE
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
1. 如圖中所示放置 Soundbar,確保任何按鈕
都不會接觸放置裝置的表面。
4. 將 墻壁支架螺絲 分別插入 3 個孔中,以將
墻壁安裝支架 固定在墻上。
墻壁
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
2. 若 支架腳 (3 顆) 及 支撐架 (2 顆) 已預安
裝,請拆除他們。
AUX IN
LAN
HDMI IN
HDMI OUT OPTICAL IN
(TV-ARC)
AUX IN
c建議使用的螺絲:M5
DC 24V
Wi-Fi SETUP
SPK ADD
SERVICE
支架腳
支撐架
· 15 · 繁體中文(香港)
5. 按照圖示 (1  2) 的順序將 Soundbar 安
裝在 墻壁安裝支架 上。
1
2
6. 將 支架固定螺釘 (用於固定牆上安裝支架)
固定,以連接 墻壁安裝支架 與
Soundbar。
c墻壁支架螺絲 須單獨購買。
c墻壁安裝螺絲的型號須視您的墻壁情況而
定,因此您應當在安裝前先檢查墻壁情況並
購買合適的墻壁安裝螺絲。
· 16 · 繁體中文(香港)
遙控器按鈕和功能
使用遙控器前安裝電池
1. 使用合適的硬幣向逆時針方向轉動並移除遙控器的電池蓋 (如下
圖所示)。
2. 裝入一節 3V 電池。裝入電池時,讓正 (+) 極朝上。放上電池
蓋,並貼邊對齊「●」符號 (如下圖所示)。
3. 使用適用的錢幣順時針轉動遙控器電池蓋,直到它固定到位
為止。


開啟或關閉 Soundbar 的電源。
電源
按下以選擇連接到 Soundbar 的來源。
SOURCE
將音量暫時設為 0。
再按一次以取消。
靜音
調整裝置的音量。
音量
· 17 · 繁體中文(香港)

按 & 按鈕即可暫停播放音樂。
播放/暫停
再次按 & 按鈕即可播放已選取的音樂。
選擇下一個檔案。
向前跳轉
選擇上一個檔案。
倒轉
僅在從手機的歌曲或從 Samsung Multiroom 應用程式的 DMS 播放音樂
時,才能使用 重複 功能 。
重複播放
• OFF-REPEAT : 取消重複播放。
• TRACK-REPEAT : 重複播放一首曲目。
• ALL-REPEAT : 重複播放所有曲目。
環繞聲功能可增添聲音的深度和空靈。
按此按鈕時,ON 或 OFF 會交替重複。
環繞聲
您可以從 TREBLE、BASS 和 AUDIO SYNC 中選擇。
SOUND
CONTROL
• 若要控制高音或低音的音量,可以在 聲音設定中選擇 TREBLE 或
BASS,然後使用
、
按鈕在 -3~+3 之間調節音量。
• 如果電視與 Soundbar 之間視頻和音頻不同步,請在 聲音設定中選擇
、
按鈕在 0~300 毫秒之間設定音頻
AUDIO SYNC,然後使用
延遲。
您可選擇 6 種聲音模式:STANDARD、MUSIC、CLEAR VOICE、
SPORTS、MOVIE 以及 NIGHT。
SOUND
EFFECT
cNIGHT 模式
切換頻道或音樂來源時,不同的輸入音樂來源之間的音量差異會自動
調節到適合收聽的音量。
您可以開啟或關閉 Anynet+ 及 Auto Power Link。
Anynet+ 與 Auto Power Link 的工作方式相反。
Anynet+
• Anynet+: 如果已透過 HDMI 纜線 連接,則可以使用 Samsung 電視遙
控器控制 Soundbar。
• Auto Power Link: 開啟透過光學輸入連接的電視時,Soundbar 自動開啟。
您可以在 -12 或 -6~+6 級別之間調節重低音音箱的音量。
WOOFER
您可以透過流音樂享用 Internet 電台。
STREAMING
MUSIC
依預設,您可以從 3 個 Internet 電台中選擇所需的電台。
若要使用流音樂功能,應該將 Soundbar 連接到網絡。
· 18 · 繁體中文(香港)
故障排除
低音炮上的紅色 LED 閃爍,並且低音炮不
發出聲音。
在尋求幫助前,請檢查以下事項。
低音炮可能尚未連接至 Soundbar 主設備。
È 再次嘗試連接低音炮。 請參閱第 5 頁。
設備無法開啟電源。
低音炮發出嗡嗡聲且明顯震動。
電源線是否已插入插座?
È 將電源插頭連接至電源插座。
按下按鍵時,相應的功能無法運作。
空氣中有靜電嗎?
È 拔下電源插頭,然後重新連接。
嘗試調節低音炮的振動。
È 按遙控器上的 WOOFER 按鈕即可調節低
音炮的音量 (在 -12、-6 ~ +6 之間)。
授權
不發出聲音。
靜音功能是否開啟?
(靜音) 鍵以取消此功能。
È 按下
音量是否設定為最小?
È 調高音量。
遙控器不起作用。
電池已耗盡嗎?
È 請更換電池。
遙控器和 Soundbar 主設備相距太遠嗎?
È 將遙控器移近 Soundbar 主設備。
TV SoundConnect (電視機配對) 失敗。
電視機支援電視聲音連接嗎?
È 自從 2012 年起發行的一些三星電視機支
援電視聲音連接功能。請檢查電視機是否
支援電視聲音連接。
電視機固件是最新版本嗎?
È 以最新固件更新電視機。
連接時有發生錯誤嗎?
È 聯絡三星服務中心。
È 重新設定 TV SoundConnect 並再次連
接。若要重新設定 TV SoundConnect 的
連接,按住 & 按鈕 5 秒鐘。
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio and the
double-D symbol are trademarks of Dolby
Laboratories.
如需 DTS 專利,請造訪
http://patents.dts.com。根據 DTS Licensing
Limited 的許可證製造。DTS,該標誌 & DTS
和該標誌一起均為 DTS, Inc. 的註冊商標,
而 DTS 2.0 Channel 是 DTS, Inc. 的商
標。© DTS, Inc. 版權所有。
詞語 HDMI 和 HDMI High-Definition
Multimedia Interface 以及 HDMI 標記是
HDMI Licensing LLC 在美國以及其他國家/地
區的商標或註冊商標。
• Spotify 軟件受協力廠商許可約束,可前往
下面的網址瞭解相關資訊:
www.spotify.com/connect/third-party licenses。
• 如需 Spotify Connect 的更多資訊,請造訪
www.spotify.com/connect
· 19 · 繁體中文(香港)
開源軟件許可聲明
如需在本產品中使用的開源軟件的詳細資訊,請造訪下面的網站 :
http://opensource.samsung.com
©
C
有關維修的重要說明
本使用說明書中的圖片和圖解僅供參考,可能與實際的產品外觀有所不同。
I
S
規格
Soundbar 主設備
重量
一般
尺寸
(ଔġx 高 x 厚)
重低音音箱
6.8 千克
(PS-WJ7500R / PS-WJ7501R)
Soundbar 主設備
1230.0 x 47.5 x 170.0 毫米
重低音音箱
452.0 x 335.0 x 154.0 毫米
(PS-WJ7500R / PS-WJ7501R)
工作溫度範圍
+5 ℃ 到 +35 ℃
工作濕度範圍
10 % 到 75 %
Soundbar 主設備
放大器
4.0 千克
額定輸出功率
20W x 8,8ohm,THD≦10%
重低音音箱
160W,3ohm,THD≦10%
(PS-WJ7500R / PS-WJ7501R)
• 額定規格
– 設計和規格以及「應用程式」畫面可能會隨時變更,恕不另行通知。
– Samsung Electronics Co., Ltd 保留隨時變更規格的權利,恕不另行通知。
– 重量和尺寸為估計值。
– 電源和消耗功率,請參考本產品上的標籤。(標籤:Soundbar 主設備底部)
A
· 20 · 繁體中文(香港)
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care Centre.
Contact Centre 
Area
` Asia Pacific
CHINA
400-810-5858
HONG KONG
3698 4698
MACAU
SINGAPORE
AUSTRALIA
NEW ZEALAND
VIETNAM
THAILAND
MYANMAR
0800 333
1800-SAMSUNG(726-7864)
1300 362 603
0800 726 786
1800 588 889
0-2689-3232, 1800-29-3232
+95-1-2399-888
1800-88-9999
603-77137477 (Overseas contact)
021-56997777
08001128888
1-800-10-726-7864 [ PLDT Toll Free ]
1-800-8-726-7864 [ Globe Landline and Mobile ]
02-422-2111 [ Standard Landline ]
0800-329999
0120-363-905
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
0961-2300300
0800-0300300 (Toll free)
0117540540
0115900000
MALAYSIA
INDONESIA
PHILIPPINES
TAIWAN
JAPAN
INDIA
BANGLADESH
SRI LANKA
AH68-02960K-00
Web Site
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/support
www.samsung.com/sg/support
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/vn/support
www.samsung.com/th/support
www.samsung.com/my/support
www.samsung.com/id/support
www.samsung.com/ph/support
www.samsung.com/tw/support
www.samsung.com/jp/support
www.samsung.com/in/support
www.samsung.com/support
AH68-02960K-00
Download PDF