Samsung | DP700C6A | Samsung ArtPC Pulse (DP700C6A-A01) User Manual(Windows 10)

User Manual
www.samsung.com
Table of contents
Getting started
3 About this manual
7 Basic items
8 Attaching the modules
9 Removing the modules
10Layout
13Connecting
17 Turning the computer on
and off
18 Unlocking the screen
19Windows
Basics
22 Wireless keyboard/mouse
(optional)
31 Memory card
34 External display
Settings & Upgrade
36 Playing music from a
mobile device through
the computer’s speakers
39 Wired LAN
42 Wireless LAN
52Volume
52 BIOS (Setup utility)
Troubleshooting
Applications
57 Samsung Recovery
62 Windows recovery
function
63Q&A
44 Using applications
45 Control Center (360
Speaker, Circle LED
setting)
46 Wi-Fi Camera
48 Samsung Update
49 Samsung PC Cleaner
50 Online Support (S Service)
51 Samsung PC Help (Selfhelp application)
Appendix
66 Product specifications
67 Ergonomic tips
71 Safety precautions
2
79 Important safety
information
82 Replacement parts and
accessories
85 Regulatory compliance
statements
103 WEEE symbol information
105 Samsung package TakeBack program
Getting started
• This user manual describes procedures for using the
touchpad, mouse and touch screen. Instructions for using the
touch screen are for models with the touch screen feature.
• Images and screenshots are those of the representative model
of the series and may differ in appearance from the actual
product.
About this manual
• Content may differ from the final product and is subject to
change without prior notice. For the latest version of the
manual, refer to the Samsung website, www.samsung.com.
• This user manual is specially designed to detail the computer’s
functions and features.
• The user manual supplied with the computer may vary
depending on the model.
• Please read this manual before using the computer to ensure
safe and proper use.
• Optional accessories, some devices, and software referred to
in this manual may not be provided or may not be subject to
upgrades. Note that the computer environment referred in
the user manual may not be the same as your environment.
• Descriptions are based on the computer’s default settings
and the Windows 10 operating system. Available features and
additional services may vary depending on the computer or
operating system.
3
Getting started
Instructional icons and expressions
Copyright
Warning: situations that could cause injury to yourself or
others
Copyright © 2016 Samsung Electronics
Caution: situations that could cause damage to the
computer or other equipment
No part of this manual may be reproduced, distributed, translated,
or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or storing in any
information storage and retrieval system, without the prior written
permission of Samsung Electronics.
This manual is protected under international copyright laws.
Note: notes, usage tips, or additional information
Computer specifications or the contents of this manual may
be changed without prior notice due to an upgrade of the
computer’s functions.
The path you should follow to carry out an instruction. For
example, “select Settings → Devices” indicates that you
should select Settings and then Devices.
Select Click the mouse or tap the touchpad or touch screen.
4
Getting started
• Intel and Core are trademarks or registered trademarks of the
Intel Corporation.
• HDMI, the HDMI logo, and
the term High Definition
Multimedia Interface are
trademarks or registered
trademarks of HDMI Licensing
LLC.
• Microsoft, MS-DOS, and Windows are trademarks or registered
trademarks of the Microsoft Corporation.
• All other trademarks and copyrights are the property of their
respective owners.
Trademarks
• Samsung and the Samsung logo are trademarks or registered
trademarks of Samsung Electronics.
• Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
worldwide.
As an ENERGY STAR® Partner,
Samsung has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.
• The ENERGY STAR Program has reduced greenhouse gas
emissions and saved energy through voluntary labeling.
• Wi-Fi®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi
CERTIFIED™, and the Wi-Fi logo are registered trademarks of
the Wi-Fi Alliance.
• Power management setting of this product has been enabled
by default, and has various timing settings from 1 minute to
5 hours.
• The product can wake with a button press on the chassis from
sleep mode.
5
Getting started
Data precautions
Product capacity representation
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and back up your
data to prevent any such data loss.
Storage capacity representation
The capacity of the storage device (HDD, SSD) of the manufacturer
is calculated assuming that 1 KB = 1,000 Bytes.
Operating system and software support
However, the operating system (Windows) calculates the storage
device capacity assuming that 1 KB = 1,024 Bytes. Therefore, the
available capacity of the HDD in Windows is smaller than the
actual capacity due to the difference in capacity calculation. For
example, for an 80 GB HDD, Windows calculates the capacity as
74.5 GB, (80x1,000x1,000x1,000) Bytes/(1,024x1,024x1,024) Bytes
= 74.505 GB.
If you change the product’s factory OS (Operating System) to
another OS or if you install software which is not supported by the
product’s original factory OS, you will not receive any technical
support, product exchange or refund, and a fee will be charged
when requesting a service.
Please use your computer with the original factory OS. If you
install an OS other than the factory OS, data may be deleted or the
computer may not start.
In addition, the capacity representation in Windows may be even
smaller because some programs, such as Samsung Recovery, may
reside in a hidden area of the HDD.
Memory capacity representation
The available memory capacity in Windows is less than the actual
capacity of memory. This is because some memory is required for
regular system operations.
For example, for 1 GB (= 1,024 MB) memory installed, Windows
may report the capacity as 1,022 MB or less.
6
Getting started
• To improve performance, the appearance of the
computer may differ from the final product and is
subject to change without prior notice.
Basic items
• Optional parts can be different depending on the
model. Optional parts may be provided in different
shapes according to the manufacturer’s policy or may
not be provided by derived models. You can purchase
optional parts separately.
Computer
360 Speaker module
Wireless keyboard
(optional)
• The computer, the 360 Speaker module, and the
storage module are covered with protective caps.
Remove the protective caps before assembling the
devices.
Storage module
Wireless mouse
(optional)
2
2
1
1
Wireless receiver
(optional)
1
USB extension cable
(optional)
2
2
1
• When you are not using the modules, store them after
covering each module with their protective caps.
7
Getting started
1 Place the storage module on the computer with the white dot
• When you use the computer without the modules,
ensure the protective cap is attached to it. The
computer may be damaged if foreign materials or metal
objects come into contact with the pins at the top of
the computer.
above the SAMSUNG logo then rotate the storage module
clockwise until you hear a click.
1
• You can purchase additional 360 Speaker module
and storage modules separately. However, it is not
recommended to attach more than three modules.
2
Attaching the modules
This product includes one speaker module and one storage
module that can be connected to the computer.
Connect the modules to computer for more convenient use.
• You can use the computer without the storage module
since the computer already includes an internal storage
unit.
• Arrange the computer and modules in an upright
position on a stable, flat surface.
• Assemble the modules in the following order, starting
from the bottom: the computer, the storage module,
and the 360 speaker module.
8
Getting started
2 Place the 360 speaker module on the storage module and
Removing the modules
assemble it in the same way.
1 Lift the module separator latch and rotate the module
anticlockwise until it stops.
1
2 Lift and remove the module.
2
1
2
When you are not using the modules, store them after
covering each module with their protective caps.
9
Getting started
Layout
Number/Name
360 Speaker
module
Do not lay the computer or modules on their sides. It can
break if it falls and experiences an impact.
Storage module
• Features or options may differ depending on the model.
• The items marked as optional may not be provided or
may be provided in different locations.
Description
• It emits the sound.
• An external hard disk that can be
used as a separate storage device.
• It turns on as follows depending
on the computer's state.
– – The computer turns on:
→
• Images and screenshots may differ from the actual
appearance of the product.
Front view
Circle LED
– – The Bluetooth feature is
activated: blinks five
times
– – The Bluetooth feature is
in pairing mode: blinks
continuously
1
– – The computer enters sleep
mode:
2
Microphone
3
• An internal microphone.
The Circle LED’s default color is when the computer
turns on or enters sleep mode. Select the Start button
( ) → Samsung → Control Center → LED effects to
change the Circle LED’s color.
4
10
Getting started
Rear view
Number/Name
1
USB 3.0 port
or chargeable
USB 3.0 port
(optional)
2
Description
• USB ports to which you can
connect USB devices as well as a
chargeable USB port are provided.
• The USB port can be used to
connect and charge a USB device.
3
7
You can distinguish the ports
by the figures printed on the
ports or by color.
4
8
• 5
9
6
10
11
Number/Name
Speaker duct
Module separator
latch
Power button
Description
• Enhances the sound quality of low
notes which emit.
• Used to remove the 360 Speaker
module or the storage module
from the computer.
• Turns the computer on and off.
:U
SB port
Wired LAN port
• :C
hargeable USB port
• Connect the Ethernet cable to this
port.
Power connector
• Connect the power cable.
About the chargeable USB port
• The charging status of the USB device is not displayed
on the computer.
• This feature may not be available on some USB devices.
11
Getting started
Number/Name
Bluetooth button
1
2
Earpiece/Headset
jack
3
7
4
8
5
9
6
Description
• Turn the Bluetooth speaker on
and off or enter Bluetooth pairing
mode.
• Connect an earpiece or a headset
to the computer to listen to audio.
• The USB-C™ port can be used to
connect and charge a USB-C™
device, or connect to an external
display device.
10
USB-C™ port
11
HDMI port
Memory card slot
12
• Purchase an adapter
separately to connect to an
external display.
• The computer cannot be
charged via the USB-C™
port.
• Used to connect an HDMI cable to
an external device.
• Insert a memory card into the slot.
Getting started
Connecting
Devices and cables which are not included can be
purchased separately.
Connecting the wireless keyboard/mouse (optional)
1 Open the battery cover at the bottom and insert the battery
as shown in the image below.
Battery cover
Battery cover
[Wireless mouse]
[Wireless keyboard]
13
Getting started
2 Insert the wireless receiver into the top-right USB port on the
3 Move the switch at the bottom of the mouse to the ON
back of the computer.
position. You can now use your wireless keyboard and mouse.
14
Getting started
Connecting a monitor
Connect a monitor with the computer via an HDMI port or
USB-C™ port.
Cables which are not included can be purchased
separately.
► When using the USB-C™ port
► When using the HDMI port
15
Getting started
Connecting a Wired LAN
Connecting a power cable
Connect a LAN cable with the computer via the wired LAN port.
1 Connect the power cable to the computer’s power connector.
2 Plug the power cable into an electric socket.
16
Getting started
2 Press the power button to turn on the computer.
Turning the computer on and off
The Circle LED will turn on.
Turning the computer on
1 After connecting your peripheral devices, turn on your
computer and the peripheral devices.
Circle LED
When you turn on the computer for the first time, the
Windows Activation screen appears.
Follow the onscreen instructions.
17
Getting started
Turning the computer off
Unlocking the screen
1 Select the Start button (
2 Select → Shut down.
To unlock the lock screen, do one of the following:
).
• Mouse: Click the lock screen.
• Keyboard: Press any key.
If the account has a password, enter the password to log in after
unlocking the screen.
• Save all data before turning off the computer.
• Since the procedures to turn the computer off may
differ depending on the installed operating system,
turn the computer off according to the procedures for
the purchased operating system.
18
Getting started
Windows
Using the control panel
You can adjust basic system settings, such as hardware, software,
or user account settings.
Microsoft Windows is an operating system that is used to control a
computer.
Select the Start button ( ) → Windows System → Control Panel.
Alternatively, right-click the Start button ( ) and select Control
Panel.
• Images and available features may differ depending on
the model and operating system.
• This manual is designed for Windows 10 and content
may differ depending on the OS version.
Then, select options you want to change.
• The image displayed on the desktop screen may differ
between models and OS versions.
Help
To access help information, select the Start button (
Started ( ).
) → Get
You can check the help information after connecting to
the Internet.
19
Getting started
Using a multi desktop
Deleting a desktop
Multi desktop allows you to work on various tasks at the same
time via multiple desktops. You can use different desktops for
various purposes.
1 Select on the taskbar.
2 Move the cursor over the desktop icon you want to delete.
Then, select
Creating a new desktop
in the upper-right corner of the icon.
Moving a program to another desktop
1 Select on the taskbar.
2 Select New desktop.
1 Select on the taskbar.
2 Select a program or window you want to move.
A new desktop will be added. You can select a desktop from
the list displayed at the bottom of the screen.
Multi desktop list
20
Getting started
2 When the action center panel appears, select a message to
Action Center
check it.
The Windows 10 action center allows you to receive system
notifications, such as updates, and push notifications, such as
emails and SNS updates. You can also adjust settings conveniently.
For example, you can select wireless network options or adjust the
volume and screen brightness via hot keys in the action center.
Checking notifications
1 Select
on the taskbar.
You can enable or disable push notifications for
applications. You can also set personalized hot keys to
appear in the action center by selecting the Start button
→ System → Notifications & actions.
( )→
21
Basics
Installing the wireless receiver
1 Open the battery cover at the bottom and insert the battery
as shown in the image below.
Wireless keyboard/mouse
(optional)
Connect button
Press the Connect button to
activate the wireless receiver.
The wireless keyboard and mouse are optional and the
appearance may differ depending on the model.
Battery cover
Some models may be supplied with a wired keyboard and mouse.
Power switch
Set the switch to the OFF position when the
mouse is not in use to save battery power.
22
Basics
2 Insert the wireless receiver into the top-right USB port on the
3 Move the switch at the bottom of the mouse to the ON
back of the computer.
position. You can now use your wireless keyboard and mouse.
• The wireless keyboard and wireless mouse can operate
within 5 meters of the wireless signal sensor.
• The range is based on the operating environment. If
there is electromagnetic interference present, such
as that created by a Wi-Fi network AP, the range may
decrease.
23
Basics
2 Insert the batteries and then close the battery cover.
Wireless keyboard
1 Open the battery cover on the bottom side of the keyboard.
1
Slide the cover upward using your fingers.
2
Battery cover
2
1
• Ensure the positive (+) and negative (-) ends of the
batteries are positioned correctly.
• The AAA batteries supplied with the product cannot be
recharged.
24
Basics
Battery replacement LED
The LED blinks when the
keyboard's battery needs to be
replaced.
Windows key
Displays the Start menu.
Directional keys
Moves the cursor up, down, left or right.
Battery cover
Connect button
Press to connect with the wireless receiver.
25
Basics
Hot key functions
Press and hold the Fn key and press a hot key.
+
Hot keys
Using hot keys
• Press the Fn Lock key. When the Fn Lock key LED turns on,
press a hot key.
To use keyboard hot keys, do one of the following:
+
• Press and hold the Fn key and press a hot key.
+
When the Fn Lock key is on, hot keys are activated without
pressing the Fn key.
26
Basics
Key/Icon
Function
F1
Play the
previous file
F2
Play/Pause
F3
Stop
F4
Play the next
file
F5
Search
F6
Share
F7
Device
F8
Setup
Description
Key/Icon
Function
F9
Mute
Toggle the sound on and off.
F10
Volume
control
Adjust the volume.
Power saving
mode
Switch to power saving mode.
F11
Multimedia playback
F12
The functions are based on
Windows menus. The key will
activate the function if it is
supported by the operating
system.
Description
The wireless keyboard automatically enters power saving
mode if there is no key input for a preset period. When the
keyboard is in power saving mode, press any key to start
using it again.
The wireless keyboard cannot be turned off.
27
Basics
Wireless mouse
Clicking
Briefly press the left mouse button once.
Wheel button
Moves the cursor up and down.
Click this button once to select an item.
Right button
Shows context-sensitive menus
for the current program.
Double-clicking
Rapidly click the left mouse button twice.
Left button
Selects and launches an item.
Double-click an item to launch it.
Right-clicking
Click the right mouse button once to display
the context-sensitive menu for the current
program.
Dragging
Use the mouse to position the cursor on an
item to be moved. Then, click the left mouse
button and move the item while the left
mouse button is held down.
When you move the mouse, the cursor on the screen moves in the
same direction.
Scrolling
Move the wheel in either direction to move
through a screen in either direction when the
page is larger than the computer screen.
28
Basics
2 Immediately place the keyboard near the receiver. Then,
If the wireless keyboard does not work
briefly press and hold the Connect button.
► Check the batteries.
Check if the battery replacement LED (
keyboard is blinking.
) at the top right of the
If the LED is blinking, replace the batteries.
► Check the wireless receiver connection.
Connect button
1 Disconnect the wireless receiver from the USB port and then
reconnect it.
3 Check that the wireless keyboard is operating properly.
29
Basics
2 Disconnect the wireless receiver from the USB port and then
If the wireless mouse does not work
reconnect it.
► E nsure that the switch on the bottom side of the mouse is in
the ON position.
► Check the batteries.
► Check the wireless receiver connection.
1 Slide the switch on the bottom side of the mouse to the OFF
position.
3 Return the switch on the mouse to the ON position.
4 Immediately place the mouse near the receiver. Then, briefly
press and hold the Connect button.
30
5 Check that the wireless mouse is operating properly.
Basics
Memory card
To use a mini or micro card, insert the card into an adapter before
inserting it into the memory card slot.
Use a memory card to transfer data to other devices, such as
digital cameras or MP3 players. Memory cards are sold separately.
Purchase a memory card with the necessary capacity for the
requirement.
• Some memory cards may not be fully compatible with
the computer. Using an incompatible card may damage
the computer or the memory card, or corrupt the data
stored in it.
This computer supports the following types of memory cards.
Abbreviation
• Use caution to insert the memory card in the indicated
direction.
Description
SD
• Secure Digital
mini SD
• mini Secure Digital
micro SD
• micro Secure Digital
SDHC
• Secure Digital High Capacity
mini SDHC
• mini Secure Digital High Capacity
micro SDHC
• micro Secure Digital High Capacity
SDXC
• Secure Digital eXtended Capacity
micro SDXC
• micro Secure Digital eXtended Capacity
• Store the card separately to prevent losing the card
when moving the computer.
• Memory card speeds vary.
31
Basics
Inserting a memory card
1 If a dummy card or a memory card adapter is inserted in the
memory card slot, remove it.
2 Insert a memory card into the memory card slot in the
indicated direction.
Use a memory card adapter to insert a micro memory card
into the memory card slot. For mini memory cards, use a mini
card adapter.
You can insert a micro memory card into the memory card
adapter. (A memory card adapter is an optional item and
may not be provided with some models.)
3 Select the pop-up message to open the memory card folder.
If a pop-up message appears, select the corresponding
window → Continue without scanning.
4 Select Open folder to view files.
5 Save, move, or delete data on the memory card.
The memory card folder opens only on the desktop.
32
Basics
Removing a memory card
• To use a memory card to exchange data with a digital
device, such as a digital camera, formatting the data
with the digital device is recommended.
Grasp the end of the card and pull it out of the slot.
• When trying to use a formatted memory card in
another digital device, format the memory card again in
the device.
Formatting a memory card
Format the memory card to remove all data or before using it for
the first time.
• Data protected by copyright laws cannot be reviewed
or modified.
Formatting a memory card deletes all data saved on
the card. If necessary, back up important data before
formatting the card.
• Inserting and removing a memory card repeatedly may
damage the memory card.
• Secure Digital Input Output (SDIO) is not supported.
1 On the taskbar, select File Explorer ( ).
2 Right-click the memory card drive, and then select Format.
3 Select Start.
• If the write-protect tab is in the locked position, you
cannot format, write, or delete data on the card.
33
Basics
External display
Connecting to a display
Connecting the computer to an external display device can be
useful for presentations or when watching a movie. The cables
and adapters required to connect an external display are sold
separately. The computer supports HDMI cables, USB-C™ display
cables, and USB-C™ display adapters.
1 Connect the HDMI cable to the corresponding port of the
computer.
2 Connect the other end of the cable to the HDMI port of the
external display.
<When using the HDMI port>
HDMI cable
USB-C™ display cable
USB-C™ display
adapter
• Check the available ports on the display device to
ensure that it is compatible with the computer.
• An external display is not supported when using DOS or
the Command Prompt window.
34
Basics
6 Select a mode.
<When using the USB-C™ port>
PC screen only
Show the screen on the computer monitor only.
Duplicate
Show the screen on both the computer and the
external display.
Extend
Extend the screen to the external display.
Second screen only
Show the screen on the external display only.
3 Connect the power cord to the external display.
4 Turn on the display and change its display mode to one that
You can also select a mode by right-clicking the Start
button ( ) and selecting Control Panel → Appearance
and Personalization → Display → Change display
settings → Multiple displays → an option. For more
information, refer to OS help.
supports an external input.
5 Press the Start button (
)+P key ( ) combination once. Then
the setting screen appears where you can select the monitor
mode.
35
Basics
Playing music from a mobile
device through the computer’s
speakers
Connecting the computer to a mobile device
using Bluetooth
Use the Bluetooth feature to play music stored on a mobile device,
such as a smartphone or tablet, through the computer’s speakers.
1 Press the Bluetooth button (
If you connect the computer and the mobile device via Bluetooth
for the first time, perform the following steps.
) on the computer to turn on the
Bluetooth speaker.
You can play music through the computer’s speakers even if the
computer turns off by activating the Bluetooth feature and pairing
the computer with the mobile device.
After the alarm sounds notifying you that the Bluetooth
feature is activated, the Circle LED blinks five times and then
the Bluetooth speaker will turn on.
• This feature is available with Bluetooth-enabled mobile
devices only.
2 Press and hold the Bluetooth button (
) for approximately
three seconds to enter the Bluetooth pairing mode.
• Maintain the distance between the computer and the
mobile device within the Bluetooth connection range.
• Other devices, such as smartphones, can pair with the
computer’s speaker only when it is in Bluetooth pairing
mode.
The Circle LED blinks continuously during Bluetooth
pairing.
• The layout of the screen and controls vary based on the
device model and the software version.
• This feature can be used only when the 360 speaker
module is attached to the computer.
• When there is no device registered as a Bluetooth
device, it enters Bluetooth pairing mode even if you do
not tap and hold the Bluetooth button ( ).
36
Basics
3 On the mobile device, activate the Bluetooth feature and tap
Using the computer’s speakers
Bluetooth Music Play. For more information, refer to your
mobile device’s manual.
If the computer’s speaker and the mobile device have been
connected previously, you can easily connect them again by
pressing the Bluetooth button ( ).
On a Samsung smartphone, tap Settings → Bluetooth,
and then tap the Bluetooth switch to activate it. Then, tap
Bluetooth Music Play.
1 Press the Bluetooth button (
) on the computer.
After the alarm sounds notifying you that the Bluetooth
feature is activated, the Circle LED blinks five times, and then
the speaker turns on automatically.
2 Move the mobile device near to the computer.
It will automatically connect to the computer.
3 Select and play a song.
The speaker will be registered in your smartphone’s Bluetooth
list and will automatically connect with your smartphone.
You can now select a music file stored on the mobile device
and play it through the computer’s speakers.
37
Basics
Turning off the computer speakers
To turn off the speakers, press the Bluetooth button ( ) on the
computer.
You will hear an alarm notifying you that the Bluetooth feature is
deactivated.
• If the speakers do not work properly, check the
Bluetooth connection and try again. Refer to
Connecting the computer to a mobile device using
Bluetooth for more information.
• If the devices are no longer paired, position the mobile
device near to the computer and try again.
• When music stored on the mobile device is playing
through the computer’s speakers, the volume is not
controlled at the computer. To adjust the volume, use
the volume controls on the mobile device.
38
Basics
Wired LAN
Wired LAN
To access the Internet at home, set up an account with an Internet
service provider (ISP). To purchase Internet service and a modem,
contact a local ISP.
1 Connect a LAN cable to the LAN port on the computer.
• Some features or procedures may differ depending on
the model.
• These descriptions are written for Windows 10, so some
figures and descriptions may differ from your operating
system. Since the procedures for other Windows
operating systems are similar, use the computer
referring to these descriptions.
39
Basics
4 Select Internet Protocol Version 4 (TCP/IPv4) from the
2 On the desktop, right-click the Start button (
) and select
Control Panel → Network and Internet → Network and
Sharing Center → Change adapter settings.
list below This connection uses the following items →
Properties.
• The Network Component name may differ depending on
the operating system.
3 Right-click Ethernet and select Properties. The LAN device
name may differ depending on the computer’s network
device.
• To add a network item such as a client, service, or protocol,
select Install... under the list of network items.
40
Basics
5 Configure the IP settings.
4 Restart the computer.
• When using DHCP, select Obtain an IP address
automatically.
• If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
• When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select Use the
following IP address and set the IP address manually.
• This feature may not work while using other power saving
features. To disable other sleep functions, right-click the
Start button ( ) and select Control Panel → Hardware
and Sound → Power Options.
6 Select OK to save the settings.
When connected to a 100 Mbps/1 Gbps wired LAN, a
message appears informing the user of connection to
a 10 Mbps/100 Mbps wired LAN when the computer
wakes from sleep mode. This happens because restoring
the network takes about 3 seconds. When the network
is restored, the computer will be connected to the
100 Mbps/1 Gbps LAN.
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1 On the desktop, right-click the Start button (
) and select
Control Panel → Network and Internet → Network and
Sharing Center → Change adapter settings.
2 Right-click Ethernet and select Properties.
3 Select Configure... → Power Management → Allow this
device to wake the computer → OK.
41
Basics
Wireless LAN
Connecting to a Wi-Fi network
Connect the computer to a wireless network to use the Internet.
1 On the taskbar, select
The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional. The pictures in this manual may differ from the
actual product depending on the wireless LAN device
model.
AP List
About Access Point (AP)
An Access Point (AP) is a network device that bridges wired
and wireless LANs and corresponds to a wireless hub in a wired
network. Multiple devices can be connected to an AP.
42
.
Basics
2 Select a network from the list of detected wireless networks
and select Connect automatically → Connect.
3 Enter a password, if necessary, and select Next.
Once the computer has been connected to a wireless
network, it will attempt to connect to it automatically when
it is available. If you require a network password, contact the
system administrator.
43
Applications
Using applications
• Images and features may differ depending on the
model and the application version.
• Some applications may not be supported depending
on the model.
• Applications that are provided by Samsung can be
installed from Samsung Update.
• Third-party software related services
For descriptions about and service requests for
third-party applications, please contact the relevant
manufacturer. Some troubleshooting actions in
response to service requests may not work depending
on the application manufacturer.
44
Applications
Control Center (360 Speaker,
Circle LED setting)
Menu
Description
Sound
Effects
You can configure the settings of the 360 Speaker and the Circle
LED with the Control Center.
360º
Speaker
1 Select the Start button ( ) → Samsung → Control Center.
2 Select an option to configure the corresponding function.
Playback
device
Bluetooth
speaker
Color
LED
effects
Smart
notifications
• Select the desired acoustic
mode among the Standard,
Movie, Game or Music.
• Select the speaker device.
• Turn the Bluetooth speaker on
and off.
• Select the color or effect of the
Circle LED.
• The Circle LED turns on every
hour on the hour or when a new
notification appears on the task
bar in full screen mode or screen
saver mode.
• Turn the smart alarm on and off
or preview the smart alarm you
set.
45
Applications
Wi-Fi Camera
Using the Wi-Fi Camera
When your computer is connected to your mobile device and your
mobile device has the Wi-Fi Camera app, your computer displays
the same image that is displayed on the camera of the connected
mobile device. Take photos or videos and save them on your
computer.
1 On your mobile device, tap Wi-Fi Camera.
2 On your computer, select the Start button (
→ Wi-Fi Camera.
3 Click Scan.
You can use this feature only with Samsung mobile
devices running Android 6.0 or later. If you cannot find
the Wi-Fi Camera app in Galaxy Apps, you cannot use this
feature.
) → Samsung
The computer will scan for nearby mobile devices.
4 Select your mobile device and click Register.
The registration is completed.
Installing the Wi-Fi Camera app on your
mobile device
The Wi-Fi Camera app should be installed on your mobile device
to use this feature.
1 On your mobile device, tap Galaxy Apps.
2 Search for the Wi-Fi Camera app and install it.
46
Applications
5 Click Preview on your computer.
6 Click
Your computer displays the same image that is displayed on
your mobile device.
or
on your computer.
You will hear the shooting sound and then the photo will be
captured or the video will begin recording.
If you cannot preview the screen with your computer,
check whether the Wi-Fi Camera app is running on your
smartphone.
• Click on your computer to preview the photos and
videos.
• The photos and videos are saved in Pictures → Camera
Roll on your computer.
47
Applications
3 Select Install & Update.
Samsung Update
Install and update Samsung applications and drivers on the
computer easily and conveniently. This application enables the
user to search for or download the BIOS, drivers, and applications
over the Internet. Keep the computer performing better and more
stably with Samsung Update.
• To check for available updates, the computer must be
connected to the Internet.
• Only applications that have been installed with this
application can be updated.
• Images and features may differ depending on the
model and the application version.
1 Select the Start button (
) → Samsung → Samsung
4 Select items to update and select OK.
Update.
2 Read and agree to the User Agreement.
This step appears only when the application runs for the first
time.
48
Applications
Samsung PC Cleaner
You can check the apps, services, and disk usage information of
your computer with Samsung PC Cleaner. It also maintains the
system performance by removing unnecessary programs and files.
Select the Start button (
) → Samsung PC Cleaner.
49
Applications
2 Select Online Support (S Service) on the main page.
Online Support (S Service)
Enter the Contents and select Request.
A service associate can resolve any problems you have with your
computer using the online chat and remote control program. You
can receive the help when you are having trouble using Samsung
software.
Online Support
(S Service)
You can access the online service for free for a certain period of
time after purchasing your computer.
• Online Support (S Service) may not be offered or its
version may be different depending on the model you
are using.
• If Online Support (S Service) is not installed, select the
Start button ( ) → Store ( ) and, search for S Service
to download it.
1 Select the Start button (
3 You can speak to a service associate to resolve your
) → Online Support (S Service).
computer’s problems.
Waiting times may vary depending on the network and
number of waiting customers.
50
Applications
Samsung PC Help (Self-help
application)
Using Samsung PC Help
1 On a smartphone, tap Samsung PC Help.
2 On the Samsung PC Help main screen, select a menu to
Use Samsung PC Help to access help-related content for Samsung
computers from a smartphone.
display the available content.
Watch the Samsung PC Help videos to become familiar with new
functions or to find solutions to problems.
You may incur additional charges when you access
content.
For more information, visit www.samsungpchelp.com.
Installing Samsung PC Help
1 On a smartphone, tap Play Store and search for Samsung PC
Help.
2 Tap INSTALL → ACCEPT to complete the setup.
51
Settings & Upgrade
BIOS (Setup utility)
Define a boot password, change the boot priority, or configure the
installed chipsets.
Volume
• Incorrect settings may cause the system to malfunction
or crash.
Adjust the system volume or sound volume when playing music
or video.
• The BIOS setup screens, menus, and items may appear
differently depending on the model and BIOS version.
1
2 Drag the adjustment bar to the desired volume.
• BIOS setup functions are subject to upgrades.
Select
on the taskbar.
Entering the BIOS screen
1 Turn on the computer.
2 Press the F2 key several times.
• If the computer is password-protected, press the F2 key
several times before the password screen appears.
Volume adjustment bar
• If the password screen or the Windows start screen
appears, restart the computer and try again.
52
Settings & Upgrade
The BIOS screen
Number
Name
The BIOS setup screen appears as shown below.
• Setup items
You can change BIOS settings using the keyboard or mouse.
• Setup tools
– – Help: View the help for BIOS set up.
– – Default: Return to the default settings.
– – Restore: Cancel changes.
– – Save: Save settings.
– – Exit: Exit BIOS setup.
• Help
• Setup menu
– – SysInfo: View the basic specifications of
the computer.
– – Advanced: Configure the chipsets and
additional functions.
– – Security: Configure security functions.
– – Boot: Configure peripherals and bootrelated settings.
The BIOS setup screen appears only in English.
53
Settings & Upgrade
Boot password
Setting passwords
Setting a password with the BIOS enhances protection against
viruses and hacking attacks.
There are three password settings available: Supervisor Password,
User Password, and HDD Password.
• Supervisor Password (low security level): This password is
required when turning on the computer or entering the BIOS
setup.
• Do not forget your password or expose it to others.
• If you forget the Supervisor Password or HDD
Password, request assistance from the Samsung Service
Center. In this case, a service fee will be charged.
• User Password (low security level): This password is required
to enter the BIOS setup. This password will be deactivated
automatically if the Supervisor Password is disabled.
• If you forget the User Password, disable the Supervisor
Password, and the User Password is also automatically
disabled.
• HDD Password (high security level): This password is required
to access the hard disk drive (HDD) from another computer.
This password may not be supported, depending on the
model.
54
Settings & Upgrade
5 Enter a password and select Ok.
Setting a boot password
The password can be up to 20 characters.
1 Turn on the computer.
2 Press the F2 key several times.
3 Access the Security menu.
4 Select a password type (Supervisor Password, User
6 Enter the password again to confirm it and select Ok.
7 Select Save → Yes to save and restart.
• To enable the Password On Boot option, set a
Supervisor Password and enter the password when
starting up the computer.
Password, or HDD Password).
• To change the HDD Password after setting it, restart the
computer.
If you cannot select an item or the HDD Password Frozen
message appears, turn off the computer and turn it on again.
Then, press the F2 key several times before the Samsung logo
appears to enter the BIOS setup screen.
• For some models, if the password entered message
appears in the Setup Notice window, select Ok to
complete the setup.
55
Settings & Upgrade
Removing a password
Boot priority
1 Turn on the computer.
2 Press the F2 key several times.
3 Access the Security menu.
4 Select a password type (Supervisor Password, User
Change the boot priority from the BIOS setup.
1 Turn on the computer.
2 Press the F2 key several times.
3 Access the Boot menu.
4 Select Boot Device Priority.
5 Select an option menu to open the list.
6 Select an option.
7 Select Save → Yes to save and restart.
Password, or HDD Password).
5 Enter the current password and select Ok.
6 Without entering any characters, select Ok → Ok.
For some models, to cancel the password, select Cancel in
the Setup Notice window.
Select Exit → Yes to restart without saving the changes.
56
Troubleshooting
• The Samsung Recovery application may not be
provided in models with less than 64 GB of storage. If
you cannot access the Samsung Recovery application,
refer to Windows recovery function.
• Some functions may differ or may be unavailable
depending on the version. Refer to the application’s
help information.
Samsung Recovery
When a problem occurs with the computer, it is easy to restore
the computer back to the factory default settings by using the
Samsung Recovery application (Recovery/Backup). It is also
possible to restore the computer to a previously backed up point.
Back up important data regularly before a problem occurs with
the computer.
• Run the Samsung Recovery application with
administrator privileges.
• The Samsung Recovery application (Recovery/Backup)
is not available when using CD/DVD drives.
• Recovering the computer erases the data or
applications saved after a backup point. Therefore, back
up important data regularly before a problem occurs
with the computer.
• When you launch the application for the first time, read
and accept the Terms and Conditions when they display
on the screen.
57
Troubleshooting
2 Select Backup Management → Factory image → Recover.
Recovering to factory default
You can restore the computer to its factory default settings. If
necessary, back up important data to an external storage device
before restoring the system. See Backing up the current system.
1 When the computer starts Windows: Select the Start button
(
) → Samsung → Samsung Recovery.
When the computer does not start Windows: Turn on the
computer and press the F4 key several times before the
Samsung logo appears.
58
Troubleshooting
3 Select Recover.
Backing up the current system
Back up important data to an alternate internal drive or an
external storage device regularly to prevent data loss.
1 Select Backup Management → New backup.
4 Follow the on-screen instructions to complete the recovery.
59
Troubleshooting
3 Follow the on-screen instructions to complete the backup.
2 Select a drive from the drive list → Backup.
• When backing up to an external storage device, connect
the device to the computer and then select the external
drive.
Recovering after a backup
Select a backup point saved on an alternate internal drive or an
external storage device to recover the computer to that point.
1 When backing up to an external storage device, connect the
device to the computer.
2 Select the Start button (
Recovery.
60
) → Samsung → Samsung
Troubleshooting
3 Select Backup Management → a backup image → Recover.
Copying the drive (making a disk image)
To replace the drive, move the data to the new drive by making a
disk image. The new drive must be large enough to hold the data
from the current drive.
Purchase an external hard drive connector separately to connect
the new drive to the computer.
1 Connect the new drive to the computer with an external hard
drive connector.
2 Select the Start button (
Samsung Recovery.
3 Select Disk copy.
4 Follow the on-screen instructions to complete data recovery.
61
) → All apps → Samsung →
Troubleshooting
4 Select a backup option → Disk copy.
Windows recovery function
The data on the disk is copied to the new disk.
If the Samsung Recovery application is not supported by the
computer, reinstall Windows using the recovery function of
Windows.
Reinstalling Windows will erase all data saved on the
computer. Back up application and personal data to an
external storage device before reinstalling Windows.
1 Select the Start button (
→ Recovery.
) → Settings → Update & security
2 Select Reset this PC → Get started.
3 Select Keep my files or Remove everything.
After the system is recovered, select the
Start button ( ) → Samsung → Samsung Update to
install the required Samsung applications.
62
Troubleshooting
Q&A
How can I start my computer in DOS?
To start the computer in DOS via a USB device:
When experiencing problems with the computer, try these
solutions.
1 Turn on the computer.
2 Press the F2 key several times.
3 Select the Boot menu.
4 Set Fast BIOS Mode to Off.
5 Set Secure Boot Control to Off.
6 Set OS Mode Selection to CSM OS and then restart the
Windows
How can I uninstall an application?
1 On the desktop, right-click the Start button (
Control Panel → Uninstall a program.
) and select
2 On the list, right-click an application to delete, and then select
Uninstall.
computer.
63
Troubleshooting
Samsung Recovery
Why is the capacity representation of the hard disk
drive (HDD) in Windows different from the product
specifications?
What is a Recovery area?
The capacity of the storage device (HDD or SSD) of the
manufacturer is calculated assuming that 1 KB = 1,000 Bytes.
However, the operating system (Windows) calculates the storage
device capacity assuming that 1 KB = 1,024 Bytes, and therefore
the capacity representation of the HDD in Windows is smaller than
the actual capacity. The capacity representation in Windows may
be smaller than the actual capacity because some applications
occupy a certain area of the HDD outside of Windows.
The computer has an additional partition for restoring data or
saving backup files (only for models with the Samsung Recovery
application). This partition is called a Recovery area and it includes
a recovery image comprised of the operating system and
applications.
For models with the Samsung Recovery application, the HDD
capacity representation in Windows may be smaller than the
actual capacity because the Samsung Recovery application
uses a hidden area of 5–20 GB of the HDD to save the recovery
image, and that hidden area is not counted towards the total
size available to Windows. The size of the Samsung Recovery
application varies by model.
64
Troubleshooting
What is a recovery image?
This refers to the operating system, drivers, and software that are
converted to a data image. It is required to recover the computer
and is embedded in the computer’s HDD. However, this is not
provided for storage devices where the capacity is less than 64 GB,
due to their small capacities.
How can I restore a computer that does not have the
Samsung Recovery application?
Restore the computer with the recovery function provided by
Windows. Refer to the Recover Functionality item in the help for
more details.
65
Appendix
• Optional components may not be provided or different
components may be provided depending on the
model.
• The system specifications are subject to change without
notice.
Product specifications
• The Storage device capacity of a computer in which
Samsung Recovery is installed, is smaller than the
product specification.
The system specifications may differ depending on the derived
model. For detailed system specifications, refer to the product
catalog.
Item
Operating
environment
Specification
• Due to this computer’s design, memory cannot be
added, replaced, or upgraded. Also, additional storage
space cannot be added.
• Temperature: - 5–40 °C for storage,
10–35 °C when operating
• The amount of memory that Windows can use may be
smaller than the actual amount of memory available.
• Humidity: 5 –90 % for storage,
20–80 % when operating
• If the case on the bottom of the device is replaced, the
laser-carved model name, serial number, and various
logos will not be displayed anymore.
Input voltage
• 100~240 VAC
Input current
• 3 A
Frequency
• 50~60 Hz
Power supply
capacity
• 150 W
Output voltage
• 12 V
66
Appendix
Ergonomic tips
• Use an adjustable chair with firm, comfortable support.
• Adjust the height of your chair so that thighs are horizontal to
the floor and feet are flat on the floor.
Maintaining the proper posture during computer use is very
important to prevent physical injury. Improper or prolonged
keyboard use may result in repetitive strain injury. Viewing the
monitor screen for extended periods of time may result in eye
strain. Therefore, please follow these guidelines carefully when
setting up and using the computer.
• The back of the chair should support the lower back. Adjust
the backrest to fit your body properly.
• Sit back fully in your chair and straighten the back and neck.
Avoid leaning forward or craning your neck toward the
computer screen.
• Avoid using the computer while lying down or on your lap.
If the computer’s temperature increases, there is a danger of
burn injury.
Back and neck
• The instructions in this manual have been prepared
so that they can be applied to the range of needs of
general users. If the user is not included in the range,
the recommendations should be applied according to
the user’s needs.
• Images may differ from actual products.
67
Appendix
Arms and hands
• When using the keyboard and touchpad, the shoulders
should be relaxed. The upper arm and forearm should form an
angle that is slightly greater than a right angle, with the wrist
and hand in almost a straight line.
• Use a light touch when typing or using the touchpad and
keep the hands and fingers relaxed. Avoid rolling the thumbs
under your palms or supporting the wrists on the desk while
typing.
• Use an external keyboard and mouse when using the
computer for long periods. When using an external keyboard
and mouse, position the devices at the same height as the
computer and within comfortable reach.
68
Appendix
Eye position and display illumination
Hearing and volume control
cm
50
VOLUME
Check your volume!
• Ensure that the volume is not too loud before using the
headset or earpiece. Excessive exposure to loud sounds can
cause hearing damage.
• Position the screen at least 50 cm away from your eyes.
• Adjust the height of the screen so that its top edge is equal to
or just below the level of your eyes.
• Always turn the volume down before plugging the earphones
into an audio source and use only the minimum volume
setting necessary to hear your conversation or music.
• Avoid setting the screen’s brightness settings excessively high.
• Keep the screen clean.
• Avoid using headphones for long periods of time.
• If wearing glasses, clean them before using the computer.
• Default audio settings can be changed by software and driver
updates without your knowledge. Always recheck equalizer
and volume settings before listening to audio.
• When referring to printed content while typing, use a static
paper holder to hold the paper at about the same height as
the monitor.
• To prevent possible hearing damage, do not listen at high
volume levels for long periods.
69
Appendix
Operating conditions
• If anyone related to you has experienced seizures or blackouts
while using a similar product, consult a physician before using
the computer.
• Take at least a 10 minute break every hour.
• Avoid using the computer in dark locations. Use the computer
with as much ambient light as you would when reading a
book.
• If you feel discomfort, such as a muscle spasm, or disoriented,
stop using the computer immediately and consult a physician.
• To prevent eye strain, take frequent breaks while using the
computer.
Reduce the risk of repetitive motion injuries.
• Indirect illumination is recommended. Use a curtain to
prevent reflections and glare on the screen.
• While operating a computer and talking on the phone, use a
headset. Using the computer while holding a phone on your
shoulder or with your neck may lead to muscle strain or injury.
When you repetitively perform actions, such as pressing keys,
drawing characters on a touch screen with your fingers, or
playing games, you may experience occasional discomfort in your
hands, neck, shoulders, or other parts of your body. When using
your computer for extended periods, hold the computer with a
relaxed grip, press the keys lightly, and take frequent breaks. If you
continue to have discomfort during or after such use, stop using
the computer and consult a physician.
• Keep frequently used items within reach.
• Only use the computer within the temperature and humidity
ranges specified in this manual.
Use caution when exposed to flashing lights.
• While using your computer, leave some lights on in the room
and do not hold the screen too close to your eyes.
• Seizures or blackouts can occur when you are exposed to
flashing lights while watching videos or playing Flash-based
games for extended periods. If you feel any discomfort, stop
using the computer immediately.
70
Appendix
Safety precautions
Power related
Handle the power cord with care.
For your safety and security and to prevent damage, carefully read
the following safety instructions. This ’Safety precautions’ relate to
computer use. Some of the content may be not applicable to your
computer.
• Do not touch with wet hands.
• Do not use a damaged power cord.
• Do not overload a multi-outlet or an extension cord beyond
the specified voltage/current capacity.
• Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
• Firmly insert the power cable into the AC adapter.
• The product mentioned in this guide refers to all items
supplied with the computer including the battery,
the AC adapter, and all other Samsung-provided
accessories.
• Do not unplug the power cord by pulling on the cable.
• Unplug the wall-mount AC adapter (integrated plug and
power adapter) from the wall outlet while holding the body
and pulling it in the direction of the arrow.
Failure to do so may result in electric shock or fire.
Connect the power cord to the AC adapter firmly.
Warning
Failure to follow the instructions marked with this symbol may
result in physical injury or fatality.
An improper connection may result in a fire.
Use the approved adapter or cable included in the product box.
If you use the unapproved adapter or cable, it cause the damage
or malfunction of the computer.
DT/AIO UM Rev 4.0
71
Appendix
Use only properly earthed electric sockets or extension cords.
Battery usage related
Unearthed electric sockets or extension cords may cause electric
shock. Any connection to unearthed electric sockets or extension
cords may produce an electric field from a current leak.
Use manufacturer-approved batteries, chargers, accessories,
and supplies.
• Using generic batteries or chargers may shorten the life of
your product or cause the computer to malfunction. They may
also cause a fire or cause the battery to explode.
If water or other substances enters the product, disconnect the
power cable and contact a Samsung Service Center.
Failure to do so may result in electric shock or fire due to the
malfunction of the inner part.
• Samsung cannot be responsible for the user’s safety when
using accessories or supplies that are not approved by
Samsung.
Take care not to allow metal objects such as a key or clip to
touch the battery terminal (metal parts).
Do not let dust accumulate on the power cord or the electric
socket. Regularly wipe the power cord and the electric socket
with a dry cloth.
Failure to do so may result in electric shock or fire.
This may cause excessive current and result in fire, burns, or
damage to the battery.
Do not bend or damage the power cable or the AC adapter with
a heavy or sharp-edged object.
If the computer or the computer battery leaks, emits strange
odors, or swells, immediately stop using the computer and
contact a Samsung Service Center.
A damaged cable or cord may result in electric shock or fire.
Keep the battery, AC adapter, and the power cord away from
infants, children, and pets.
Failure to do so may result in an explosion or fire.
Failure to do so may result in electric shock or damage.
Replace a run-down battery with a new, Samsung-approved
battery.
72
Appendix
Dispose of worn-out batteries properly.
To avoid suffocation, keep the plastic bag away from infants and
children.
• There is a danger of fire or explosion.
Putting a plastic bag over the head may result in suffocation.
• The battery disposal method may differ depending on
your country and region. Dispose of the used battery in an
appropriate way.
When removing the real time clock (RTC) battery, keep it away
from infants and children.
Never heat the computer (or the battery) or put the computer
(or the battery) into a fire.
Failure to do so may result in an explosion or fire.
Before cleaning the computer, disconnect all the cables that are
connected to the computer.
If a child swallows the battery, the child may suffocate. If this
happens, immediately contact a doctor.
Failure to do so may result in electric shock or fire.
Keep the computer away from water or liquid.
Usage related
Water or liquid entering the computer may short-circuit the
computer, resulting in electric shock or fire.
Do not use the computer on heated floors or electric pads, or
on beds, blankets, or cushions that block the ventilation of the
computer.
If the computer is dropped or broken, disconnect the power
cord and contact a Samsung Service Center.
A blocked vent causes the computer to overheat, resulting in an
explosion, fire, burns, or computer malfunction.
Using a broken computer may result in electric shock or fire.
Do not touch the computer’s surface or the vents for extended
periods while the computer is on.
Do not use the computer in hot or humid locations, such as a
bathroom, sauna, or inside a car during summer.
Contact with the vent or the surface for extended periods may
result in low-temperature burns, such as redness on the skin.
Failure to do so may result in computer malfunction or electric
shock.
The computer can be used in locations with an ambient
temperature of 10 °C to 35 °C and a relative humidity of 20 % to
80 %RH.
73
Appendix
Do not place heavy objects on the product.
Caution
This may cause a problem with the computer. In addition, the
object may fall and cause injury or damage the computer.
Failure to follow instructions marked with this symbol may result
in minor physical injury or damage to the computer.
Properly shut down, disconnect and secure the computer cables
before moving it.
Installation related
Failure to do so may damage the computer or cause someone to
trip over a loose cable.
Do not block the ports (holes), vents, etc. of the product and do
not insert objects.
Usage related
Damage to a component within the computer may cause electric
shock or fire.
Do not use the pen for unintended purposes, such as poking
the body like eyes or ears and do not put it in your mouth.
When using the computer on its side, ensure the vents are clear
and facing upwards.
Doing so may result in physical injury.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
Do not place a candle, light cigar, etc. over or on the product.
Keep the computer’s vents at least 15 cm away from walls and
other objects.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Failure to do so may result in physical injury.
Using a repaired product without testing it for safety may cause an
electric shock or fire.
There is a danger of fire.
Do not place or use the computer on slanted or vibrating
surfaces.
Failure to do so may result in computer malfunction or damage.
74
Appendix
In case of lightning, immediately turn the system off, disconnect
the power cord from the wall outlet and phone line from
modem.
If the product emits smoke or there is a burning smell,
disconnect the power plug from the wall outlet and contact a
Samsung Service Center immediately.
There is a danger of electric shock or fire.
There is a danger of fire.
Connect only permitted devices to the connectors or ports of
the computer.
Do not use damaged or illegally modified CDs.
Failure to do so may result in an electric shock or fire.
Do not insert the fingers into the ports (holes), card slot, or
vents.
There is a danger of damaging the product or personal injury.
Do not press the eject button while the CD-ROM drive is in
operation.
There is a danger of injury or electric shock.
You might lose data and the disc might be suddenly ejected and
could cause an injury.
Use recommended computer cleansing solutions when
cleaning the product and only use the computer when it is
completely dry.
Do not drop or hit the computer against anything.
Failure to do so may result in physical injury or computer
malfunction.
Failure to do so may result in electric shock or fire.
You should not use a paper clip to perform an emergency
disc ejection while the disc is in motion. Make sure to use the
emergency disc eject method only when the Optical Disc Drive
has stopped.
Do not allow the antenna and a source of electricity, such as a
socket outlet, to come into contact.
There is a danger of electric shock.
There is a danger of injury.
When handling computer parts, follow the instructions on the
manual supplied with the parts.
Do not place your face close to the Optical Disc Drive tray when
it is operating.
Failure to do so may result in damage to the product.
There is a danger of injury due to an abrupt ejection.
75
Appendix
Do not use your computer in a hospital or on an aircraft that can
be interfered with by radio frequency.
Do not use the product if it is cracked or broken.
Broken glass or acrylic could cause injury to your hands and face.
Take the device to a Samsung Service Center to have it repaired.
• Avoid using your computer within a 15 cm range of a
pacemaker, if possible, as your computer can interfere with
the pacemaker.
When using wireless communication (LAN, Bluetooth, etc.)
always follow applicable instructions. For example, airlines and
hospitals have strict requirements.
• To minimize possible interference with a pacemaker, use your
computer only on the side of your body that is opposite the
pacemaker.
Avoid exposing a drive to magnetic fields. Security devices
with magnetic fields include airport walk-through devices
and security wands. The airport security devices that check
carry-on luggage, such as conveyor belts, use X-rays instead of
magnetism and will not damage a drive.
• If you use medical equipment, contact the equipment
manufacturer before using your computer to determine
whether or not the equipment will be affected by radio
frequencies emitted by the computer.
Keep the computer away from magnetic material.
• When in a hospital, turn off your computer and follow all
hospital regulations. Radio frequencies emitted from the
computer may affect medical equipment.
• Magnetic materials may cause computer malfunction.
• To avoid damaging the computer or magnetic stripe cards,
such as credit cards, keep magnetic stripe cards away from the
computer.
76
Appendix
Upgrade Related
Make sure to close the computer cover before connecting the
power after a reassembly.
Do not attempt to upgrade the computer, unless you are
qualified. Otherwise, contact a Samsung Service Center or an
authorized technician.
There is a danger of electric shock if your body touches an internal
part.
Follow the specified instructions contained in the manual for
user maintenance. Do not disassemble any other parts by
yourself.
Never disassemble or repair the product by yourself.
Failure to do so may result in computer malfunction, electric
shock, or fire.
Take care when touching the product or parts.
To connect a device that is not manufactured or authorized
by Samsung, enquire at a Samsung Service Center before
connecting the device.
The computer may be damaged or you may be injured.
There is a danger of damaging the product.
Do not disassemble the power supply unit in any circumstances.
Storage and movement related
There is a danger of accident. Use authorized Samsung Service
Center.
Failure to do so may result in electric shock, fire, or an explosion.
Do not operate or look at the computer while driving a vehicle.
Shut down the computer and disconnect all cables before
disassembling the computer.
There is a danger of a traffic accident. Please concentrate on
driving.
Failure to do so may cause electric shock.
77
Appendix
Cautions on preventing data loss (hard disk
management)
LCD bad pixels
Samsung observes strict specifications regarding the quality
and reliability of the LCD. However, there is a small chance that
a few pixels may be bad. A large number of bad pixels can cause
problems with the display, but a small number of bad pixels
does not generally affect computer performance.
Take care not to damage the data on a storage device.
• Subjecting the device to physical impacts may result in data
loss.
• The data may be lost when the computer is turned off or reset
by a power failure while the storage device is operating.
Samsung’s quality standards for bad pixels are as follows:
• Bright dot: 2 or fewer
• The data may be lost and irrecoverable due to a computer
virus.
• Black dot: 4 or fewer
• Combination (bright and dark): 4 or fewer
Clean the LCD screen with a soft cloth dampened with
computer cleansing detergent.
• The data may be lost if the power is turned off while running
an application.
• Samsung is not liable for any loss of data on the storage
device.
To prevent data loss due to damage to the hard disk drive,
please back up the data frequently.
Do not use excessive force. Doing so may damage the LCD screen.
78
Appendix
Important safety information
Setting up the system
• Read and follow all instructions marked on the product and
in the documentation before operating the system. Retain all
safety and operating instructions for future use.
Safety instructions
The system is designed and tested to meet the latest standards for
safety of information technology equipment. However, to ensure
safe use of this product, it is important that the safety instructions
marked on the product and in the documentation are followed.
• Do not use this product near water or a heat source such as a
radiator.
• Set up the system on a stable work surface.
• The product should be operated only with the type of power
source indicated on the rating label.
Always follow these instructions to help guard against
personal injury and damage to the system.
• Ensure that the electrical outlet to power the equipment is
easily accessible in case of fire or short circuit.
• If the computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
• Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when setting up your work area. Never insert
objects of any kind into the computer ventilation openings.
79
Appendix
• Ensure that the fan vents on the bottom of the casing are
clear at all times. Do not place the computer on a soft surface,
doing so will block the bottom vents.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill anything on the computer or its components.
The best way to avoid spills is to not eat or drink near the
computer or its components.
• When using an extension cord with this system, make sure
that the total power rating on the products plugged into the
extension cord does not exceed the extension cord power
rating.
• Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
• For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause reflections from surrounding light and bright surfaces.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement ensure
that a qualified technician performs the task.
• When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
80
Appendix
• Unplug the system from the wall outlet and contact a
Samsung Service Center if:
Operating instructions
1 When installing and operating devices please refer to safety
– – The power cord or plug is damaged.
requirements in the user manual.
– – Liquid has been spilled into the computer.
– – The computer does not operate properly when the
operating instructions are followed.
2 Devices can be used only with the equipment specified in the
– – The computer was dropped or the casing is damaged.
3 If any smell of burning or smoke is detected from the
technical specifications of the devices.
– – The computer performance changes.
computer the unit should be switched off and the battery
removed. The unit should be checked by a qualified
technician before reuse.
4 Service and repair of devices should be carried out by
authorized service centers.
5 Do not allow the portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
81
Appendix
Replacement parts and
accessories
Battery disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Use only replacement parts and accessories recommended by
manufacturer.
Contact the Samsung Service Center for information on how to
dispose of batteries that you cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
THERE IS RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and
dental facilities, oxygen rich environments, or industrial
areas.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
82
Appendix
Laser safety
Connect and disconnect the AC adapter
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Do not unplug the power cord by pulling the cable only.
• Laser Safety Note: Use of controls or adjustments or
performance of procedures other than those specified
in this manual may result in hazardous radiation
exposure. To prevent exposure to laser beams, do not
try to open the enclosure of a CD or DVD drive.
• Class 1M laser radiation when operating part is open.
Do not view directly with optical instruments.
• Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
83
Appendix
Power cord requirements
General requirements
The power cord set (all plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
The requirements listed below are applicable to all countries:
• All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
• The power cord set must have a minimum current capacity
of 7 A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system (USA only).
• The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C7
(or C5) connector, for mating with appliance inlet on the
computer.
84
Appendix
Regulatory compliance
statements
The RF field strength of the wireless device or devices that may
be embedded in the notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into the notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Wireless guidance
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in the notebook system. The
following section is a general overview of considerations while
operating a wireless device.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Additional limitations, cautions, and concerns for specific
countries are listed in the specific country sections (or country
group sections). The wireless devices in the system are only
qualified for use in the countries identified by the Radio Approval
Marks on the system rating label. If the country you will be using
the wireless device in, is not listed, please contact your local Radio
Approval agency for requirements. Wireless devices are closely
regulated and use may not be allowed.
85
Appendix
• Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current
aviation regulations require wireless devices to be
turned off while traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wi-Fi)
and Bluetooth communication devices are examples of
devices that provide wireless communication.
• Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions
on the use of a wireless device in the destination
country.
• In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted
or eliminated. Airports, Hospitals, and Oxygen or
flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or
eliminated. When in environments where you are
uncertain of the sanction to use wireless devices, ask
the applicable authority for authorization prior to use or
turning on the wireless device.
• If the system came equipped with an internal
embedded wireless device, do not operate the wireless
device unless all covers and shields are in place and the
system is fully assembled.
• Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will
void the authorization to use it. Please contact the
manufacturer for service.
• Only use drivers approved for country in which the
device will be used. See the manufacturer System
Restoration Kit, or contact the manufacturer’s technical
support for additional information.
86
Appendix
Explosive Device Proximity Warning
United States of America
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in
an explosive environment unless the device has been
modified to be qualified for such use.
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Use On Aircraft Caution
Do not hold any component containing the radio such that the
antenna is very close to touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices because
their signals could interfere with critical aircraft
instruments.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
Other wireless devices
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
Safety notices for other devices in the wireless network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
87
Appendix
The Part 15 radio device operates on a non-interference
basis with other devices operating at this frequency. Any
changes or modification to said product not expressly
approved by Intel could void the user’s authority to
operate this device.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may
cause harmful interference. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Unintentional emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
88
Appendix
Intentional emitter per FCC Part 15
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in the notebook system. This section
is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Wireless devices that may be in the system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and/or damage this device.
89
Appendix
Health and safety information
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Exposure to Radio Frequency (RF) Signals
Certification Information
Wireless devices are not user serviceable. Do not modify
them in any way.
This product can contain an embedded radio transmitter and
receiver. It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two
expert organizations, the National Council on Radiation Protection
and Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the recommendations
were developed by scientific and engineering experts drawn from
industry, government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
Modification to a wireless device will void the
authorization to use it. Contact manufacturer for service.
Before a new model is available for sale to the public, it must be
certified to the FCC that it does not exceed the exposure limit
established by the FCC. Evaluation per each model is performed
in positions and locations (e.g. at the bottom on the body) as
required by the FCC.
90
Appendix
For corresponding model only
For body worn operation, this model meets the FCC RF exposure
guidelines when used with Samsung accessory designated for this
product. Non-compliance with the above restrictions may result in
violation of FCC RF exposure guidelines.
The Specific Absorption Rate (SAR) is a measure of the rate of
absorption of RF energy by the human body expressed in units
of watts per kilogram (W/kg). The FCC wireless devices to comply
with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
RF exposure or SAR information can viewed on-line at
www.fcc.gov/oet/ea/fccid/. This site uses this product FCC ID
number on the outside of the product. Sometimes it may be
necessary to remove the battery pack to find number. Once
you have the FCC ID number for a particular product, follow the
instructions on the website and it should provide RF exposure
information or values for typical or maximum SAR for particular
product.
SAR level of this device while operating can be well below the
maximum value. This is because the device is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
91
Appendix
Canada
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Intentional emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of this device.
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in your notebook system. This
section is only applicable if these devices are present. Refer to the
system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
92
Appendix
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15 to 5.25 GHz frequency
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 to 5.25 GHz to reduce the potential
for harmful interference to co-channel mobile satellite systems.
High power radar is allocated as the primary user of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and/or damage to this device.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to
licensing.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25 to
5.35 GHz and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will
void the authorization to use it. Contact manufacturer for
service.
93
Appendix
Brazil
European Union
Este produto esta homologado pela ANATEL, de acordo com
os procedimentos regulamentados pela Resolucao 242/2000, e
atende aos requisitos tecnicos aplicados.
European Union CE marking and compliance notices
Products intended for sale within the European Union are
marked with the Conformité Européene (CE) Marking, which
indicates compliance with the applicable Directives and European
standards and amendments identified below. This equipment also
carries the Class 2 identifier.
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
The following information is only applicable to systems labeled
with the CE mark .
European Directives
This Information Technology Equipment has been tested and
found to comply with the following European directives:
• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
• R&TTE Directive 1999/5/EC
94
Appendix
Samsung Electronics (UK) Ltd, Euro QA Lab.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
Blackbushe Business Park Saxony Way, Yateley,
Hampshire GU46 6GG United Kingdom
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
European radio approval information (for products
fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4 GHz/5 GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
The low band 5.15–5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
95
Appendix
EU R&TTE compliance statements
Nation
Česky[Czech]
Dansk[Danish]
Deutsch[German]
Nation
Description
Samsung tímto prohlašuje,
že tento Notebook PC je ve
shodě se základními požadavky
a dalšími příslušnými
ustanoveními směrnice 1999/5/
ES.
Undertegnede Samsung
erklærer herved, at følgende
udstyr Notebook PC overholder
de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/
EF.
Hiermit erklärt Samsung, dass
sich das Gerät Notebook PC
in Übereinstimmung mit den
grundlegenden Anforderungen
und den übrigen einschlägigen
Bestimmungen der Richtlinie
1999/5/EG befindet.
Eesti[Estonian]
English
Español[Spanish]
96
Description
Käesolevaga kinnitab
Samsung seadme Notebook
PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele
asjakohastele sätetele.
Hereby, Samsung, declares
that this Notebook PC is in
compliance with the essential
requirements and other
relevant provisions of Directive
1999/5/EC.
Por medio de la presente
Samsung declara que el
Notebook PC cumple con
los requisitos esenciales
y cualesquiera otras
disposiciones aplicables
o exigibles de la Directiva
1999/5/CE.
Appendix
Nation
Ελληνική[Greek]
Français[French]
Italiano[Italian]
Description
Nation
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung
ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ
ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Samsung
déclare que l’appareil
Notebook PC est conforme aux
exigences essentielles et aux
autres dispositions pertinentes
de la directive 1999/5/CE.
Con la presente Samsung
dichiara che questo Notebook
PC è conforme ai requisiti
essenziali ed alle altre
disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski[Latvian]
Lietuvių[Lithuanian]
Nederlands[Dutch]
97
Description
Ar šo Samsung deklarē, ka
Notebook PC atbilst Direktīvas
1999/5/EK būtiskajām prasībām
un citiem ar to saistītajiem
noteikumiem.
Šiuo Samsung deklaruoja,
kad šis Notebook PC atitinka
esminius reikalavimus ir
kitas 1999/5/EB Direktyvos
nuostatas.
Hierbij verklaart Samsung dat
het toestel Notebook PC in
overeenstemming is met de
essentiële eisen en de andere
relevante bepalingen van
richtlijn 1999/5/EG.
Appendix
Nation
Malti[Maltese]
Magyar[Hungarian]
Polski[Polish]
Description
Nation
Hawnhekk, Samsung, jiddikjara
li dan Notebook PC jikkonforma
mal-ħtiāijiet essenzjali u ma
provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/
EC.
Alulírott, Samsung nyilatkozom,
hogy a Notebook PC megfelel
a vonatkozó alapvetõ
követelményeknek és az
1999/5/EC irányelv egyéb
elõírásainak.
Niniejszym Samsung
oświadcza, Ŝe Notebook PC
jest zgodny z zasadniczymi
wymogami oraz pozostałymi
stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português[Portuguese]
Slovensko[Slovenian]
Slovensky[Slovak]
98
Description
Samsung declara que este
Notebook PC está conforme
com os requisitos essenciais e
outras disposições da Directiva
1999/5/CE.
Samsung izjavlja, da je ta
Notebook PC v skladu z
bistvenimi zahtevami in
ostalimi relevantnimi določili
direktive 1999/5/ES.
Samsung týmto vyhlasuje, že
Notebook PC spĺňa základné
požiadavky a všetky príslušné
ustanovenia Smernice
1999/5/ES.
Appendix
Nation
Suomi[Finnish]
Svenska[Swedish]
Íslenska[Icelandic]
Description
Nation
Samsung vakuuttaa täten
että Notebook PC tyyppinen
laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä
koskevien direktiivin muiden
ehtojen mukainen.
Härmed intygar Samsung
att denna Notebook PC står
I överensstämmelse med de
väsentliga egenskapskrav och
övriga relevanta bestämmelser
som framgår av direktiv
1999/5/EG.
Hér með lýsir Samsung yfir því
að Notebook PC er í samræmi
við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun
1999/5/EC.
Norsk[Norwegian]
Türkiye[Türkçe]
99
Description
Samsung erklærer herved
at utstyret Notebook
PC er i samsvar med de
grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/
EF.
Bu belge ile, Samsung bu
Notebook PC’nin 1999/5/
EC Yönetmeliğinin temel
gerekliliklerine ve ilgili
hükümlerine uygun olduğunu
beyan eder.
Appendix
Manufacturer information
To view the EU Declaration of Conformity
for this product (in English only), go to:
www.samsung.com/uk/support/main/supportMain.do or
www.samsung.com/uk/support then search the model number of
the product.
Samsung Electronics Co., Ltd.
129, Samsung-Ro, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor
or below address.
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
doc.eu@samsung.com
Tel: +86-0512-6253-8988
Samsung Electronics Vietnam Co., Ltd.
Yen Phong 1, I.P Yen Trung Commune, Yen Phong Dist., Bac Ninh
Province, Vietnam
For the web or the phone number of the Samsung Service Center,
see the Warranty or contact the retailer where you purchased your
product.
100
Appendix
Due to the fact that the frequencies used by
802.11b/802.11g wireless LAN devices may not yet be
harmonized in all countries, 802.11b/802.11g products
are designed for use only in specific countries or regions,
and are not allowed to be operated in countries or regions
other than those of designated use.
European economic area restrictions
Local restriction of 802.11b/802.11g radio usage
Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.
As a user of these products, you are responsible for
ensuring that the products are used only in the countries
or regions for which they were intended and for verifying
that they are configured with the correct selection of
frequency and channel for the country or region of use.
Any deviation from permissible settings and restrictions in
the country or region of use could be an infringement of
local law and may be punished as such.
101
Appendix
RTC caution
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Discard used batteries according to the
Manufacturer’s instruction.
General
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400–2483.5 MHz.
The low band 5.15–5.35 GHz is for indoor use only.
Belgium
For private use outdoors in public spaces, no registration is
necessary for distances less than 300 m. For distances greater
than 300 m, you must register with the Belgian Institute for Postal
services and Telecommunications (BIPT). For commercial use
outdoors, you must obtain a license from the BIPT. For registration
or licensing, please contact the BIPT.
For other languages, refer to the corresponding manuals.
France
The low band 5.15–5.35 GHz is for indoor use only.
102
Appendix
WEEE symbol information
Household users should contact either the retailer where
they purchased this product, or their local government office,
for details of where and how they can take these items for
environmentally safe recycling.
Correct disposal of this product (Waste Electrical &
Electronic Equipment)
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial
wastes for disposal.
(Applicable in countries with separate collection
systems)
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (for example,
charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life.
For information on Samsung’s environmental commitments
and product specific regulatory obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/
corporatecitizenship/data_corner.html
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
India only
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
This product is RoHS compliant.
103
Appendix
USA only
Correct disposal of batteries in this product
(Applicable in countries with separate collection
systems)
This Perchlorate warning applies only to primary CR (Manganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY
in California USA.
“Perchlorate Material- special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect
or call, (877) 278-0799.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels
in EC Directive 2006/66. If batteries are not properly disposed
of, these substances can cause harm to human health or the
environment.
For battery recycling go to call2recycle.org; or call 1-800-822-8837.
To protect natural resources and to promote material re-use,
please separate batteries from other types of waste and recycle
them through your local, free battery return system.
Warning: This product contains chemicals known to the state of
California to cause cancer, birth defects, or other reproductive
harm.
104
Appendix
Samsung package Take-Back
program
In partnering with select recyclers, Samsung offers packaging
take-back at no cost to you.
Simply call the following number for the locations nearest you.
CRT Processing, LLC
(877) 278-0799
Kathy Severson – Logistics contact
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278-0799
105
Some content may differ from the computer depending on the region, service provider, software version, or computer model, and is
subject to change without prior notice.
www.samsung.com
English. 11/2016. Rev. 2.2
Download PDF