Samsung | RS21HNTPN | Samsung RS21HNTPN1/XSH 大型對門式雪櫃 554L 白金銀色 User Manual

Refrigerator
user manual
English
This manual is made with 100 % recycled paper.
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
Free Standing Appliance
DA99-02028F-06.indb 01
13. 6. 19.
1:53
safety information
SAFETY INFORMATION
WARNING
WARNING
• Before operating the appliance, please
read this manual thoroughly and retain it
for your reference.
• Because these following operating
instructions cover various models, the
characteristics of your refrigerator may
differ slightly from those described in this
manual.
CAUTION/WARNING SYMBOLS USED
WARNING
Indicates that a danger of death or
serious injury exists.
CAUTION
Indicates that a risk of personal injury or
material damage exists.
• In case of R600a refrigerant, this gas
is natural gas with high environmental
compatibility that is, however, also
combustible. When transporting and
installing the appliance, care should
be taken to ensure that no parts of the
refrigerating circuit are damaged.
• Refrigerant squirting out of the pipes could ignite
or cause an eye injury. If a leak is detected,
avoid any naked flames or potential sources of
ignition and air the room in which the appliance is
standing for several minutes.
•
OTHER SYMBOLS USED
•
Represents something you must NOT do.
Represents something you must NOT
disassemble.
Represents something you must NOT
touch.
Represents something you must follow.
Indicates that you must disconnect the
power plug from the socket.
Represents a ground is needed to prevent
electric shock.
It is recommended that this symbol be
handled by service man.
• In order to avoid the creation of a flammable
gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in
which the appliance may be sited depends
on the amount of refrigerant used.
Never start up an appliance showing any signs of
damage. If in doubt, consult your dealer.
The room must be 1m3 in size for every 8g of
R600a refrigerant inside the appliance.
The amount of refrigerant in your particular
appliance is shown on the identification plate
inside the appliance.
Please dispose of the packaging material for this
product in an environmentally friendly manner.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
WARNING
•
•
•
•
These warning signs are here to prevent injury to
you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place
for future reference.
• This refrigerator must be properly installed and
located in accordance with the manual before it
is used.
• Use this appliance only for its intended purpose
as described in this instruction manual.
• We strongly recommend that any servicing be
performed by a qualified individual.
• R600a or R134a can be used as a refrigerant.
Check the compressor label on the rear of the
appliance and the rating label inside the fridge to
see which refrigerant is used for the refrigerator.
02_ safety information
DA99-02028F-06.indb 02
13. 6. 19.
1:53
SEVERE WARNING SIGNS
• Do not install the refrigerator in a damp
place or place where it may come in
contact with water.
Deteriorated insulation of electrical parts may
cause an electric shock or fire.
Do not place this refrigerator in direct sunlight or
expose to the heat from stoves, room heaters or
other appliance.
Do not plug several appliances into the same
multiple power board. The refrigerator should
always be plugged into its own individual
electrical which has a voltage rating that matched
the rating plate.
This provides the best performance and also
prevents overloading house wiring circuits, which
could cause a fire hazard from overheated wires.
Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
Do not bend the power cord excessively or place
heavy articles on it.
This constitutes a fire hazard.
Have the power cord repaired or replaced
immediately by the manufacturer or its service
agent if power cord has become frayed or
damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
If the power cord is damaged, have it replaced
immediately by the manufacturer or its service
agent.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
Do not insert the power plug with wet hands.
Unplug the refrigerator before cleaning and
making repairs.
Do not use a wet or damp cloth when cleaning
the plug.
Remove any foreign matter or dust from the
power plug pins.
Otherwise there is a risk of fire.
If the refrigerator is disconnected from the power
supply, you should wait for at least ten minutes
before plugging it back.
If the wall socket is loose, do not insert the power
plug.
There is a risk of electric shock or fire.
The appliance must be positioned so that the
plug is accessible after installation.
• The refrigerator must be grounded.
- You must ground the refrigerator to
prevent any power leakages or electric
shocks caused by current leakage from
the refrigerator.
• Never use gas pipes, telephone lines or
other potential lightening rods as ground.
•
WARNING
•
•
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
- Improper use of the ground plug can result
in electric shock.
Do not dissemble or repair the refrigerator by
yourself.
You run risk of causing a fire, malfunction and/or
personal injury.
If you smell pharmaceutical or smoke, pull
out power plug immediately and contact your
Samsung electronics service center.
Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
Do not use mechanical devices or any other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not place or use electrical appliance inside
the refrigerator/freezer, unless they are of a type
recommended by the manufacturer.
The appliance is not intended for use by children
or infirm persons without supervision.
Children should be supervised to ensure that they
do not play with the appliance.
Do not let children hang on the door. If not, a
serious injury may occur.
Do not touch the inside walls of the freezer or
products stored in the freezer with wet hands.
This may cause frostbite.
If the refrigerator is not to be used for a long
period of time, pull out the power plug.
Deterioration in the insulation may cause fire.
Do not store articles on the top of the appliance.
When you open or close the door, the articles
may fall and cause personal injury and/or material
damage.
CAUTION SIGNS
• This product is intended only for the
storage of food in a domestic environment.
Manufacturer’s recommended storage times
should be adhered to. Refer to relevant
instructions
Bottle should be stored tightly together so that
they do not fall out.
Do not place carbonated or fizzy drinks in the
freezer compartment
Do not put bottles or glass containers in the
freezer.
When the contents freeze, the glass may break
and cause personal injury.
Do not spray inflammable gas near the refrigerator.
There is a risk of explosion or fire.
Do not directly spray water inside or outside the
refrigerator.
CAUTION
•
•
•
•
•
•
safety information _03
DA99-02028F-06.indb 03
13. 6. 19.
1:53
- There is a risk of fire or electric shock.
• Do not store volatile or flammable substances in
the refrigerator.
- The storage of benzene, thinner, alcohol, ether,
LP gas and other such products may cause
explosions.
• If you have a long vacation planned, you must
empty the refrigerator and turn it off.
• Do not store pharmaceuticals products, scientific
materials or temperature-sensitive products in the
refrigerator.
- Products that require strict temperature controls
must not be stored in the refrigerator.
• Do not put a container filled with water on the
refrigerator.
- If spilled, there is a risk of fire or electric shock.
• Do not apply strong shock or excessive force
onto the surface of glass.
- Broken glass may result in a personal injury and/
or property damage.
CAUTION SIGNS FOR
CLEANING
disposal of this product. Ensure that none of the
pipes on the back of the appliances are damaged
prior to disposal. The pipes shall be broke in the
open space.
In the event of a power failure, call the local
office of your Electricity Company and ask
how long it is going to last.
Most power failures that are corrected in an hour or
two will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off.
But should the power failure last more than 24hours,
remove all frozen food.
For doors or lids fitted with locks and keys, the keys
be kept out of the reach of children and not in the
vicinity of the refrigerating appliance, in order to
prevent children from being locked inside.
CAUTION
ADDITIONAL TIPS FOR PROPER
USAGE
• Never put fingers or other objects into the
dispenser hole and ice chute.
- It may cause personal injury or material damage.
• Do not use a wet or damp cloth when cleaning
the plug, remove any foreign material or dust
from the power plug pins.
- Otherwise there is a risk of fire.
• If the refrigerator is disconnected from the power
supply, you should wait for at least five minutes
before plugging it back.
•
-
WARNING SIGNS FOR
DISPOSAL
•
• When disposing of this or other refrigerator/s,
remove the door/door seals, door latch so that small
children or animals cannot become trapped inside.
• Leave the shelves in place so that children may
not easily climb inside.
• R600a or R134a is used as a refrigerant. Check
the compressor label on the rear of the appliance
or the rating label inside the fridge to see which
refrigerant is used for your refrigerator. When
this product contains flammable gas(Refrigerant
R600a) contact your local authority in regard to
safe disposal of this product.
• Cyclopentane is used as a insulation blowing gas.
The gases in insulation material require special
disposal procedure. Please contact your local
authorities in regard to the environmentally safe
•
•
•
•
•
• Allow the appliance to stand for 2hours
after installation.
To get best performance of product,
Do not place foods too closely in front of
the vents at the rear of the appliance as it
can obstruct free air circulation in the freezer
compartment.
Wrap the food up properly or place it in airtight
containers before put it into the fridge freezer
Do not put any newly introduced food for freezing
near to already frozen food.
Do not place carbonated or fizzy drinks in the
freezer compartment
Please observe maximum storage times and
expiry dates of frozen goods.
There is no need to disconnect the refrigerator
from the power supply if you will be away for
less than three weeks. But, remove all the food if
you are going away for the three weeks or more.
Unplug the refrigerator and clean it, rinse and dry.
Most power failures that are corrected in an
hour or two will not affect your refrigerator
temperatures. However, you should minimize
the number of door openings while the power is
off. But should the power failure last more than
24hours, remove all frozen food.
If the key is provided with refrigerator, the keys
should be kept out of the reach of children and
not in the vicinity of the appliance.
The appliance might not operate consistently
(possibility of defrosting of contents or
temperature becoming too warm in the frozen
food compartment) when sited for an extended
04_ safety information
DA99-02028F-06.indb 04
13. 6. 19.
1:53
•
•
•
•
•
period of time below the cold end of the range of
temperatures for which the refrigerating appliance
is designed.
Do not store food which goes bad easily at low
temperature, such as bananas, melons.
Place the ice tray at the originally provided
posistion by manufacturer in order to achieve
optimal ice-freezing.
Your appliance is frost free, which means there is
no need to manually defrost your appliance, as
this will be carried out automatically.
Temperature rising during the defrost can comply
with ISO requirement. But If you want to prevent
an undue rise in the temperature of the frozen
food while defrosting the appliance, please wrap
the frozen food in several layers of paper such as
newspaper.
Any increase in temperature of frozen food during
defrosting can shorten its storage life.
contents
SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR ……………………………………………………… 06
OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR …………………………………………… 15
TROUBLESHOOTING …………………………………………………………………………………………… 21
safety information _05
DA99-02028F-06.indb 05
13. 6. 19.
1:53
setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy
the many state-of-the-art features and efficiencies
that this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level)
flooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Overall space required in use. Refer to drawing
and dimension as below.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
• Allow clearance to the right, left, back and
top when installing. This will help reduce
power consumption and keep your energy
bills lower.
• Do not install the refrigerator where the
temperature will go below 50°F (10°C).
• Make sure you disconnect the water supply line
BEFORE removing the freezer door.
See the next section on “Separating the Water
Line” to avoid damage.
CAUTION
When installing, servicing or cleaning behind
the refrigerator, be sure to pull the unit
straight out and push back in straight after
finishing.
25mm
25mm
at least 50mm
at least 50mm
06_ setting up
DA99-02028F-06.indb 06
13. 6. 19.
1:53
1. With the Freezer door closed, remove the upper
hinge cover 1 using a screwdriver, and then
disconnect the wires by gently pulling them apart
2 .
REMOVING THE
REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the doors.
1. Removing the Front Leg Cover
1
2
2. Remove hinge screws 3 and the ground screw
4 by turning counter-clockwise, and take off the
upper hinge 5 . Be careful that the door does not
fall on you as you are removing it
01 SETTING UP
First, open both the freezer and refrigerator doors,
and then take off the front leg cover by turning the
three screws counter-clockwise.
4
3
Separating the Water Supply Line
from the Refrigerator
1. Remove the water line by pressing the coupler
and pulling the water line 2 away.
1
5
3. Next, remove the door from the lower hinge
by carefully lifting the door straight up 7 .
6
7
6
1
2
Do not cut the water line. Gently separate it
from the coupler.
Be careful not to pinch the water tubing and
wire harness on the door.
4. Remove the lower hinge
8
using a hex wrench.
2. Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the
hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire
harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
setting up _07
DA99-02028F-06.indb 07
13. 6. 19.
1:53
Removing the Fridge Door
REATTACHING THE
REFRIGERATOR DOORS
1. With the door closed, remove the upper hinge
cover 1 using a screwdriver.
Once you have safely placed your refrigerator where
you plan for it to stay, it is time to put the doors back
on.
1
Reattaching the Freezer Door
2. Remove hinge screws 2 and the ground screw
3 by turning counter-clockwise, and take off the
upper hinge 4 . Be careful that the door does not
fall on you as you are removing it
1. Replace the freezer door by inserting the water
line 1 back into the lower corner of the door and
then into the hole on the lower hinge 2 .
Gently pull the water line back down so that it
runs straight, with no kinks or bends.
1
2
2
3
4
3. Remove the door from the lower hinge
lifting the door straight up 6 .
5
2. Insert the upper hinge shaft 3 into the hole on
the corner of the freezer door 4 .
Make sure the hinge is level between the upper
hinge hole 5 and the hole of the cabinet 6 and
reattach the hinge screws 7 and ground screw
8 by turning in a clockwise direction.
Reconnect the wires.
by
8
4. Remove the lower hinge 7 from the bracket
by gently lifting the lower hinge upwards.
7
8
5
3
6
4
3. Place the front part of the upper hinge cover 9
on the front of the upper hinge 10 and reattach
with the screw.
10
9
08_ setting up
DA99-02028F-06.indb 08
13. 6. 19.
1:53
Reattaching the Fridge Door
Reattaching the Water Supply Line
1. Insert the lower hinge
hinge bracket 2 .
1. Insert the water line
1
back into the lower
2
into the coupler
1
.
1
2. Fit the hole in the corner of the fridge door
over the lower hinge 4 .
01 SETTING UP
2
3
1
2
3
2. The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
3. Insert the clip in the install pack and check that it
holds the line firmly.
4
Center of transparent
coupler
3. Insert the upper hinge shaft 5 into the hole
on the hinge 6 . Make sure the hinge is level
between the upper hinge hole 7 and the hole on
the top of the cabinet 8 . Then, reattach hinge
screws 9 and the ground screw 10 by turning it
in a clock wise direction.
clip A (1/4”)
(6.35mm)
Reattaching the Front Leg Cover
Before attaching the cover, check water
connector for leakage.
Replace the front leg cover by turning the
three screws clockwise, as shown in the
figure.
4. Place the front part of the upper hinge cover 11
on the front of the upper hinge 12 and reattach it
with the screw.
12
11
setting up _09
DA99-02028F-06.indb 09
13. 6. 19.
1:53
LEVELLING THE REFRIGERATOR MAKING MINOR ADJUSTMENTS
TO THE DOORS
Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make final adjustments. If the refrigerator
is not level, it will not be possible to get the doors
perfectly even.
The front of the refrigerator is also adjustable.
Remember, a level refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on levelling the
refrigerator.
When the door of the freezer is
higher than the fridge
When the Freezer door is lower than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Adjustment part
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
nut 1 from the
lower hinge until it
reaches the upper
end of the bolt 2 .
Leg
3
Wrench
1
Nut
2
Bolt
Screw Driver
When the Freezer door is lower than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the fridge.
When you release the nut 1 , make sure
that you use the Allen wrench provided 3
to loosen the bolt 2 in a counter-clockwise
direction.
You should then be able to unscrew the nut
1 with your fingers.
2. Adjust the
height difference
between the doors
by turning the
bolt 2 clockwise
or counter
.
clockwise
3
Wrench
2
Bolt
Leg
Screw Driver
Refer to the next section for the best way to
make very minor adjustments to the doors.
When you turn clockwise
move up.
, the door will
3. After adjusting the
3 Wrench
doors, turn the
nut 1 clockwise
2 Bolt
until it
1 Nut
reaches the lower
end of the bolt,
then tighten the boltlt again
the wrench 3 to
i with
ith th
fix the nut in place 1 .
If you do not secure the nut firmly, the bolt
may release.
10_ setting up
DA99-02028F-06.indb 10
13. 6. 19.
1:54
CHECKING THE WATER
DISPENSER LINE (OPTIONAL)
Water Line installation Kits are included. You
can find it in one of the freezer drawers.
INSTALLING THE WATER
DISPENSER LINE
For Interior model
Parts for water line Installation
1 Water line fixer and screws
Close Main
Water pipe
Close Main
Water pipe
01 SETTING UP
A water dispenser is just one of the helpful features
on your new Samsung refrigerator. To help promote
better health, the Samsung water filter removes
unwanted particles from your water. However, it
does not sterilize or destroy microorganisms. You
will need to purchase a water purifying system to do
that. In order for the icemaker to operate properly,
water pressure of 138 ~862 Kpa is required. Under
normal conditions, a 170 cc paper cup can be filled
in 10 seconds. If the refrigerator is installed in an
area with low water pressure (below 138 Kpa), you
can install a booster pump to compensate for the
low pressure. Make sure the water storage tank
inside the refrigerator is properly filled. To do this,
press the water dispenser lever until the water runs
from the water outlet.
4. After connecting the water supply to the water
filter, turn your main water supply back on and
dispense about 1l to clear and prime the water
filter.
No gap
Connecting the water line to the
refrigerator
1. Remove the dust cap from the water line on the
rear of the unit and fit a compression nut from the
install kit.
2. Remove the water pipe from the install kit and fit
a compression nut to one end.
3. Join the two pipes together using the
compression joint from the install kit ensuring that
the joint is water tight.
4. Join the other end of the install pipe to the main
water supply and turn on the water to check for
leaks.
2 Pipe connector
Loosen a
Remove
cap
Water Line
from unit
3 Water line
4 Water Filter
No gap
Water Line
from Kit
Connecting to the water supply line
1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3. Follow the water line installation instructions in
the installation kit.
Only connect the water line to a drinkable
water source. If you have to repair or
disassemble the water line, cut off 6.5mm
of the plastic tubing to make sure you get a
snug, leak-free connection.
CAUTION
The water line must be connected to the cold
water pipe. If it is connected to the hot water
pipe, it may cause the purifier to malfunction.
CAUTION
Before being used, the leakage in these
places should be examined
setting up _11
DA99-02028F-06.indb 11
13. 6. 19.
1:54
• Samsung Warranty does not cover WATER LINE
INSTALLATION.
• The cost of connection to a water supply is at the
customer expense, unless included in the delivery
charge (refer to the delivery agreement with the
seller)
• Please contact Plumber or Authorised Installer for
the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
INSTALLING THE WATER
DISPENSER LINE
For Exterior model
Parts for water line Installation
Pipe connector
Water line fixer and screws
Water line
Purifier lock-clip
Purifier
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.
CAUTION
The water line must be connected to the cold water
pipe. If it is connected to the hot water pipe, it may
cause the purifier to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
Note:
If the coupler does not fit on the current tap, go the
nearest authorised service dealer and purchase the right
couplers fittings.
Select the location where the purifier
is to install. (Model with the purifier)
-
-
If you wish to reassemble the water inlet
and outlet sides of the purifier during purifier
installation, see the reference illustration.
Cut the water line attached to the purifier to the
appropriate place after measuring the distance
between the purifier and the cold water tap.
12_ setting up
DA99-02028F-06.indb 12
13. 6. 19.
1:54
Remove any residual matter inside
the purifier. (Model with the purifier)
COUPLER “A”
-
-
TAP
LINE OUTLET
-
90 degree
PURIFIER WATER
OUTLET SIDE OF
PURIFIER
CAUTION
Insert Locking Clip After
tube seated
PURIFIER
WATER LINE
WATER
WATER INLET
SIDE OF PURIFIER
01 SETTING UP
SIDE OF
PURIFIER
Open the main water tap to check whether water
is running through the water tube on the water
inlet side of the purifier.
If water does not come out through the line,
check whether the tap is open.
Leave the tap open until clean water is running
out and any residual matter that built up during
manufacturing has been removed.
COUPLER
Locking Clip
Replacement Instructions
1. Shut off water supply.
2. Note the Flow direction on the filter.
3. Insert water supply tube into the inlet side of the
filter until the tube stop.
Attach the purifier lock-clip.
-
FLOW DIRECTION
WATER SUPPLY
INLET SIDE
Hold the purifier lock-clip in the appropriate
position (under the sink for example) and fix it
tightly into place where to screw.
PERMEAT
PURIFIER LOCK-CLIP
Note : You must also ensure that
the cut is square and not
at any sort of angle as
this could cause a leak
4. After inserting tube, put together the clip strongly.
The Clip fix the tube.
Secure the purifier in position.
-
Fix the purifier in position, as shown in the figure
on the right.
WATER TUBE
PURIFIER LOCK-CLIP
5. Turn on the water and check for leaks. If leaks
occur, repeat step 1,2,3,4. If leaks persist,
discontinue use and call your supporting dealer.
6. Flush filter for 5 minutes before use.
PURIFIER
setting up _13
DA99-02028F-06.indb 13
13. 6. 19.
1:54
Connect the water line to the
refrigerator.
Check the amount of water supplied
to the ice tray.
-
1. Lift up the icemaker cover and gently pull out.
2. When you press the Test button for 3 seconds,
the ice cube container is filled with water from
the water supply tap. Check to make sure the
amount of water is correct (see the illustration
below).
If the water level is too low, the ice cubes will be
small. This is a water pressure problem from with
in the main water pipes, not the refrigerator.
-
Remove the compressor cover of the refrigerator.
Connect the water line to the valve, as shown in
the figure.
When connected, check if there is any leakage.
If any, repeat the connection.
Reattach the compressor cover of the refrigerator.
WATER LINE
CONNECTION NUT
1
INSTRUCTIONS
COMPRESSOR COVER OF
REFRIGERATOR
Secure the water line.
-
-
Using clip ”A”, fix the water
line to the wall (the back of
refrigerator).
When the water line is
secure, make sure whether
the water line is not
excessively bent, pinched or
squashed.
Ice maker
CLIP A
WATER LINE
Feeler Arm
Removing any residual matter inside
the water supply line after installing
filter.
1. Turn ON the main water supply & turn OFF the
valve to the water supply line.
2. Run water through the dispenser until the water
runs clear (approx. 1L). This will clean the water
supply system and remove air from the lines.
3. Additional flushing may be required in some
households.
4. Open the refrigerator door and make sure there
are no water leaks coming from the water filter.
Check the water level
2
Test button
Using the anti-sweat heater switch
When the humidity of the indoor is high, sweat
may form around the beverage station & dispenser.
Turn the Anti-sweat heater switch on, to remove
the sweat and turn the switch off when the sweat
disappears.
A newly installed water filter cartridge may
cause water to briefly spurt from the water
dispenser. This is due to air getting into the
line. It should pose no problem to operation.
RS21/23H** (OPTIONAL)
14_ setting up
DA99-02028F-06.indb 14
13. 6. 19.
1:54
operating the SAMSUNG sideby-side refrigerator
OPERATING THE REFRIGERATOR
4
COOLSELECT MODEL
5
6
2
7
3
4
FILTER
CHANGE
BUTTON
5
POWER
COOL
BUTTON
DISPENSER MODEL
6
CHILD LOCK
FUNCTION
7
NORMAL MODEL
FRIDGE
BUTTON
Use this button to choose Cubed,
Crushed or to turn the Ice feature
off.
When you change the filter, press
this button for 3 seconds to reset
the filter schedule.
02 OPERATING
Using the Control Panel /
Digital Display
1
3
ICE TYPE
BUTTON
Press this button to quickly
return the refrigerator to the set
temperature.
Press this button again to cancel the
Power Cool mode.
By pressing the Power Cool
button and the Fridge button
simultaneously for 3 seconds, all
buttons will be locked. The Water
dispenser lever and the Ice lever
will not work either. To cancel this
function, Press these two buttons
for 3 seconds again.
Press the Fridge button to set the
fridge to your desired temperature.
You can set temperature between
1°C and 7°C (34°F and 45°F).
When you use Power Freeze the energy
consumption of the refrigerator will increase.
When not in use the temperature display will turn off,
this is normal.
1
POWER
FREEZE
BUTTON
2
FREEZER
BUTTON
Speeds up the time needed to
freeze products in the freezer. This
can be helpful if you need to quickly
freeze items that spoil easily or if
the temperature in the freezer has
warmed dramatically (For example, if
the door was left open).
Remember to turn it off when you don’t
need it and return the freezer to your original
temperature setting.
If you need to freeze large amount of food
stuff, activate Power Freeze function at least
24 hours before.
Press the Freezer button to set the
freezer to your desired temperature,
You can set the temperature
between -14°C (8°F) and -25ºC
(-14°F).
operating _15
DA99-02028F-06.indb 15
13. 6. 19.
1:54
CONTROLLING THE
TEMPERATURE
USING THE ICE AND COLD
WATER DISPENSER
CONTROLLING THE FREEZER
TEMPERATURE
Press the Ice Type button to select the type of ice
you want
The freezer temperature can be set between -14°C
(8°F) and -25ºC (-14°F) to suit your particular needs.
Press the Freezer button repeatedly until the desired
temperature is shown in the temperature display.
Keep in mind that foods like ice cream may melt at
-16ºC (4°F).
The temperature display will move sequentially from
-14°C (8°F) and -25ºC (-14°F). When the display
reaches -14ºC (8°F), it will begin again at -25ºC
(-14°F).
Five seconds after the new temperature is set the
display will again show the actual current freezer
temperature. However, this number will change as
the Freezer adjusts to the new temperature.
CONTROLLING THE FRIDGE
TEMPERATURE
The refrigerator temperature can be set between 7ºC
(46°F) and 1ºC (34°F) to suit your particular needs.
Press the Fridge button repeatedly until the desired
temperature is shown in the temperature display.
The temperature control process for the Fridge
works just like the Freezer process. Press the Fridge
button to set your desired temperature. After a few
seconds, the Fridge will begin tracking towards the
newly set temperature. This will be reflected in the
digital display.
The temperature of the freezer or the
refrigerator may rise from opening the doors
too frequently, or if a large amount of warm
or hot food is placed in either side. This may
cause the digital display to blink. Once the
freezer and refrigerator return to their normal
set temperatures the blinking will stop. If the
blinking continues, you may need to “reset”
the refrigerator. Try unplugging the appliance,
wait about 10 minutes and then plug back in.
No Ice
Select this if you want to
turn off the icemaker
Ice is made in cubes. When you select
“Crushed”, the icemaker grinds the ice cubes
into crushed ice.
Dispensing ice
Place your glass underneath the ice outlet and
push gently against the ice dispenser lever with
your glass. Make sure the glass is in line with the
dispenser to prevent the ice from bouncing out.
Using the Water Dispenser
Place a glass underneath the water outlet and
push gently against the water dispenser lever with
your glass. Make sure the glass is in line with the
dispenser to prevent the water from splashing out.
16_ operating
DA99-02028F-06.indb 16
13. 6. 19.
1:54
•
•
•
•
• If you have a long vacation or business trip
and won’t use water or ice dispensers,
close the water valve.
- Otherwise, water leakage may occur.
• Wipe excess moisture from the inside and leave
the doors open.
- Otherwise, odor and mold may develop.
USING THE COOLSELECT
ZONE™ DRAWER (OPTIONAL)
Quick Cool
• You can use the Quick Cool feature with the
CoolSelect Zone™.
• “Quick Cool” allows 1~3 canned beverages to
cool within 60 min.
• To cancel this function, press the “Quick Cool”
button again. CoolSelect Zone™ returns to the
previous temperature.
• When “Quick Cool” ends, it returns to the “Cool”
temperature setting.
02 OPERATING
• Do not put your fingers, hands or any
other unsuitable objects in the chute or
ice-maker bucket.
It may result in personal injury or material
damage.
Never put finger or any other objects in the
dispenser opening.
It may cause injury.
Use only the ice maker provided with the
refrigerator.
The water supply to this refrigerator must only be
installed/connected by a suitably qualified person
and connect to a potable water supply only.
In order to operate the ice maker properly, water
pressure of 138 ~ 862 Kpa is required.
WARNING
CAUTION
Thaw
• Drips loss and quality deterioration of meats
reduces the freshness of foods.
• After “Thaw” is selected, warm and cold air is
alternately supplied into the CoolSelect Zone™
Drawer.
• Depending on the weight of meat, thawing time
can be selected for 4 hrs, 6 hrs, 10 hrs, and 12
hrs sequentially.
• When “Thaw” ends, CoolSelect Zone™ display
returns to “Zero Zone” condition.
• When “Thaw “ ends, there are no juice in the
meats and they are half-freezed condition so it is
easy to cut them for cooking.
• To cancel this option, press any button except
“Thaw”.
• The approximate thawing time of meat and fish
are shown below. (Based on 1inch thickness)
To get more space,you can remove top freezer
drawer since it does not affect thermal and
mechanical characteristics. A declared storage
volume of frozen food storage compartment is
calculated with this drawer removed.
THAW TIME
WEIGHT
4 hours
363g (0.8Ib)
6 hours
590g (1.3Ib)
10 hours
771g (1.7Ib)
12 hours
1000g (2.2Ib)
Depending on the size and thickness of meat
and fish, the thawing time may vary.
The above weight represents the total weight
of food in the CoolSelect Zone™ Drawer.
Ex) The total thawing time for 400g frozen
beef and 600g frozen chicken will be 10
hours.
WARNING
With the “Thaw” option, food which is not
needed to thaw in the CoolSelect Zone™
Drawer should be removed.
operating _17
DA99-02028F-06.indb 17
13. 6. 19.
1:54
Soft Freeze
• When “Soft Freeze” is chosen, the temperature
on the digtal panel displays -5ºC regardless of
the set temperature of the refrigerator.
• “Soft-Freeze” temperature helps keep meats and
fishes fresh longer.
• Can cut meat easily without drips.
REMOVING THE FREEZER
ACCESSORIES
Cleaning and rearranging the interior of the freezer
is simple.
1. Remove the Glass shelf by pulling the shelf out as
far as it will go. Then, gently lift it up and remove
it.
Zero Zone (0ºC)
• When “Zero Zone” is chosen, the temperature
of the CoolSelect Zone™ Drawer is kept at 0 ºC
regardless of the set refrigerator temperature.
• “Zero Zone” temperature helps keep meat or fish
fresh longer.
2. Remove the door bin by holding the door bin with
both hands and then gently lift it up.
Cool
• When “Cool” is chosen, the temperature will
be the same as the set temperature of the
refrigerator. The digital panel shows the same
temperature as that of the display panel.
• The CoolSelect Zone™ Drawer allows extra
refrigerator space.
Depending on the beverages, the cool-down
time may vary.
WARNING
3. Remove the Plastic drawer by pulling it out and
slightly lifting it up.
For “Quick Cool” option, food stored in
the CoolSelect Zone™ Drawer should be
removed.
4. Remove the Icemaker bucket by lifting up and
pulling it out.
Do not use excessive force when removing
the cover.
Otherwise, the cover may break and cause
injury.
18_ operating
DA99-02028F-06.indb 18
13. 6. 19.
1:54
Before removing any accessories, make sure
that no food is in the way.
When possible, remove the food altogether to
reduce the risk of accidents.
REMOVING THE FRIDGE
ACCESSORIES
1. Remove the spill Proof Glass Shelf by pulling the
shelf out as far as it will go. Then, gently lift it up
and gently remove it.
To get the best energy efficiency of this
product, please leave all selves, drawers
and baskets on their original position like as
illustration in page (17).
WARNING
2. Remove the Vegetable & Fruit Drawer by pressing
on the indentations found on the inside left and
right sides of the Veggie Box/
Dry Box cover and remove
by pulling forward.
Holding the drawer with one
hand, lift it up a little bit while
pulling it forward and take it
out of the refrigerator.
3. Remove the Gallon Door Bin by holding the bin
with both hands and gently lifting it up.
Do not use Benzene, Thinner or Clorox™ for
cleaning.
They may damage the surface of the
appliance and can create a risk of fire.
CAUTION
02 OPERATING
CLEANING THE REFRIGERATOR
Do not spray the refrigerator with water while
it is plugged in, as it may cause an electric
shock. Do not clean the refrigerator with
benzene, thinner or car detergent for risk of
fire.
REPLACING THE INTERIOR
LIGHT
For LED lamp, please contact service
engineer to replace it.
4. The Z Shelf is attached to the cabinet wall.
Remove the wine shelf by sliding it up and gently
lifting the shelf out of the tabs.
CAUTION
Ensure that the Z Shelf is fitted as shown in
the diagram and not upside down.
operating _19
DA99-02028F-06.indb 19
13. 6. 19.
1:54
CHANGING THE WATER FILTER
WARNING
To reduce risk of water damage to your
property DO NOT use generic brands of water
filers in your SAMSUNG Refrigerator. USE
ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible
for any damage, including, but not limited to
property damage caused by water leakage
from use of a generic water filter. SAMSUNG
Refrigerators are designed to work ONLY
WITH SAMSUNG Water Filter.
The “Filter Indicator” light lets you know when it is
time to change your water filter cartridge.
When the filter indicator light changes to red, it is
time to change the filter.
To give you some time to get a new filter, the light
will come on up just before the capacity of the
current filter runs out.
Changing the filter on time provides you with the
freshest, cleanest water from your fridge.
2.
3.
4.
5.
1. Remove the water filter from the box and
put a month indicator sticker on the filter
as shown.
Place a sticker on the filter that dates six months
in the future. For example, if you are replacing the
water filter in March, put the “SEP” (September)
sticker on the filter to remind you to replace in
September. Normally filter life is about every 6
months.
Next, remove the fixed cap by turning it counter
clockwise.
Remove the new filter’s protective cap and
remove the old filter.
Position and insert the new filter into the filter
housing.
Slowly turn the water filter clockwise 90º to align
with the indication mark on the cover, locking
the filter in position. Make sure that the indicator
is lined up with the “lock” position. Do not over
tighten.
6. Once you have completed this process, hold the
Ice Type button for 3 seconds to reset the filter
schedule.
7. Lastly, Dispense 1L of water through water
dispenser and throw away. Make sure that water
flows clearly again before drinking.
A newly installed water filter cartridge may
cause water to briefly spurt from the water
dispenser. This is due to air getting into the
line. It should pose no problem to operation.
Ordering replacement filters
To order more water filter cartridges, contact your
authorised Samsung dealer.
USING THE DOORS
The refrigerator doors are equipped with a door
opening and closing feature that ensures that the
doors close all the way and are securely sealed.
After opening beyond a certain point, the door will
“catch” and remain open. When the door is ajar
ahead of the catch that allows it to stay open, it will
close automatically.
Cover filter
1
2
Sticker
(month
indicator)
4
3
5
Align the
indication
mark
with lock
position
20_ operating
DA99-02028F-06.indb 20
13. 6. 19.
1:54
troubleshooting
SOLUTION
The refrigerator does not
work at all or it does not
chill sufficiently.
•
•
The food in the fridge is
frozen.
•
You hear unusual noises
or sounds.
•
•
•
•
•
•
•
•
The front corners and
sides of the appliance
are hot and condensation
is occurring.
Ice is not dispensing.
•
•
•
•
•
•
•
You can hear water
bubbling in the
refrigerator.
There is a bad smell in
the refrigerator.
Check that the power plug is properly connected.
Is the temperature control on the display panel set to the correct temperature?
Try setting it to a lower temperature.
Is the refrigerator in direct sunlight or located too near a heat source?
Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
Is the temperature control on the display panel set to the correct temperature?
Try setting it to a warmer temperature.
Is the temperature in the room very low?
Did you store the food with a high water content in the coldest part of the fridge?
Try moving those items into the body of the fridge instead of keeping them in the
CoolSelect Zone™ drawer.
Check that the refrigerator is level and stable.
Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
Was anything dropped behind or under the refrigerator?
A “ticking” sound is heard from inside the refrigerator. This is normal and occurs
because various accessories are contracting or expanding in relation to the
temperature of the refrigerator interior.
Some heat is normal as anti-condensators are installed in the front corners of the
refrigerator to prevent condensation.
Is the refrigerator door ajar? Condensation can occur when you leave the door
open for a long time.
Did you wait for 12 hours after installation of the water supply line before making
ice?
Is the water line connected and the shut-off valve open?
Did you manually stop the ice making function? Make sure Ice Type is set to
Cubed or Crushed.
Is there any ice blocked within the ice storage unit?
Is the freezer tAemperature too warm? Try setting the freezer temperature lower.
•
This is normal. The bubbling comes from the refrigerant coolant liquid circulating
through the refrigerator.
•
•
•
Has a food item spoiled?
Make sure that strong smelling food (for example, fish) is wrapped so that it is
airtight.
Clean out your freezer periodically and throw away any spoiled or suspect food.
Frost forms on the walls
of the freezer.
•
•
•
Is the air vent blocked? Remove any obstructions so air can circulate freely.
Allow sufficient space between the foods stored for efficient air circulation.
Is the freezer door closed properly?
Water dispenser is not
functioning.
•
•
Is the water line connected and the shut-off valve open?
Has the water supply line tubing been crushed or kinked?
Make sure the tubing is free and clear of any obstruction.
Is the water tank frozen because the refrigerator temperature is too low?
Try selecting a warmer setting on the main display panel.
•
03 TROUBLESHOOTING
PROBLEM
troubleshooting _21
DA99-02028F-06.indb
4:21
13. 6. 19.
1:54
memo
DA99-02028F-06.indb
4:22
13. 6. 19.
1:54
memo
DA99-02028F-06.indb
4:23
13. 6. 19.
1:54
Ambient Room Temperature Limits
This refrigerator is designed to operate in ambient temperatures specified by its
temperature class marked on the rating plate.
Class
Symbol
Ambient Temperature range(°C)
Extended Temperate
SN
+10 to +32
+16 to +32
Temperate
N
Subtropical
ST
+16 to +38
Tropical
T
+16 to +43
Internal temperatures may be affected by such factors as the location of the fridge/freezer, ambient
temperature and the frequency with which you open the door. Adjust the temperature as required to
compensate for these factors.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
English
DA99-02028F-06.indb
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
4:24
13. 6. 19.
1:54
電冰箱
使用者說明書
中文
本手冊採用 100 % 再生紙印製。
想像 無限可能
感謝您購買三星產品。
如要收到較完整服務, 請上網註冊您的產品
http://www.samsung.com/register
落地式
DA99-02028F-06.indb 01
13. 6. 19.
1:54
安全資料
• 若使用的是R600a雪種,此氣體是天然氣,
安全資料
警告
警告
環境相容性很高,不過仍屬易燃氣體。在搬
運及安裝本家電時,請小心確保電冰箱電路
• 在操作本家電前,請詳細閱讀本手冊,並
妥善儲存,以供日後參考。
• 由於以下的操作指示適用於多個型號,你
所選購的電冰箱特點可能及本手冊的內容
有少許不同。
的所有零件完整無損。
• 喉管噴出的雪種可燃燒或使眼睛受傷。如
發現漏氣,應避免任何明火或火源,並讓
放置本家電的房間保持空氣流通數分鐘。
使用的注意/警告符號
警告
注意
指會造成死亡或重傷的危險。
指會導致人身損傷或物品損壞的危險。
其他使用的符號
代表你不可以進行的事。
代表你不可以拆開的部分。
• 如出現氣體外洩的情況,為了避免易燃氣
體與空氣混合,放置本家電的房間大小應
按照雪種的用量決定。
• 切勿在本家電出現損壞跡象時啟動本家電。如有
警告
任何疑問,應諮詢你的經銷商。
• 本家電每使用8克R600a雪種,房間大小就必須
增加一立方公尺。
• 你的個別家電的雪種用量列於家電機身內的識別
板上。
• 請以符合環保的方式棄置本產品的包裝物料。
代表你不可以接觸的部分。
代表你必須遵守的事。
指你必須拔除電源插頭。
代表需要接駁地線以預防觸電。
謹建議本符號由維修人員處理。
這些警告符號旨在預防你或他人受傷。
請嚴格遵從。
閱讀本節後,請將手冊放在安全的地方,以供日後參考。
• 使用本電冰箱前必須依照本手冊妥善安裝及擺放。
• 使用本家電的目的必須與本說明手冊內說明的用
途一致。
• 我們強烈建議由合資格的維修人員進行任何維修。
• 我們使用R600a或R134a為雪種。請查看本家電
後方的壓縮機標簽及冷藏室內的等級標簽,了解
該電冰箱使用的雪種。
02_ 安全資料
DA99-02028F-06.indb 02
13. 6. 19.
1:54
嚴重警告符號
• 切勿在潮濕或可能與水接觸的地方安裝電
警告
-
冰箱。
電子零件的絕緣體在老化後可能會造成觸電或火
災。
• 切勿讓電冰箱直接被日曬,或接近火爐、暖爐或
其他家電的發熱來源。
• 切勿把多件家電插在同一個拖板上。電冰箱只應
使用配合電壓等級板上顯示的電壓讀數的獨立插
座。
-
這樣做可帶來最佳效能,也能預防家用電路負荷
過重,因為過熱的電線可以引起火災。
• 應確保電源插頭不會被電冰箱的背部壓到或損
壞。
• 切勿過度彎曲電線或把重物放在上面。
-
這樣做可引起火災。
• 如電線有磨損或損壞,應立即由生產商或服務代
理商維修或更換電線。
• 切勿使用中間或兩端已出現裂痕或磨損的電線。
• 若你聞到藥味或煙味,應立即拔除電源插頭,並
聯絡三星家電服務中心。
• 保持本家電機身或安置架附近沒有任何雜物。
• 切勿使用生產商建議以外的機械裝置或任何其他
方式來加速解凍過程。
• 切勿損壞機身電路。
• 除非獲生產商建議,否則切勿在電冰箱/冷凍室
內放置或使用任何家電。
• 切勿讓兒童或體弱人士自行操作本家電。
• 兒童應受監管,以確保他們不會玩弄本家電。
• 切勿讓兒童吊在電冰箱門上,這樣做可能會造成
嚴重損傷。
• 手濕時切勿接觸冷凍室內壁或儲存在冷凍室內的
物品。
-
這樣做可能會造成凍傷。
• 若長時間不使用電冰箱,請拔除電源插頭。
-
老化的絕緣體可引起火災。
• 切勿在本家電頂部擺放任何物品。
-
在開關電冰箱門時,放在上面的物品可能會掉
下,導致人身損傷及/或物品損壞。
• 若電線已受損,請要求生產商或服務代理商立即
更換。
• 搬動電冰箱時要小心,切勿壓到或損壞電線。
• 手未乾透時切勿把電源插頭插入。
• 在清潔及維修前,請拔除電冰箱插頭。
要注意的符號
• 清潔插頭時切勿使用濕布。
• 本產品只宜在家用環境中儲存食物。
• 清除電源插頭上的任何異物或塵埃。
-
否則可能引起火災。
注意
• 應遵從生產商建議的食物儲存時間。
請參閱相關指示
• 拔除電冰箱的插頭後應等待最少十分鐘才再插回
插頭。
• 所有瓶子應緊密地放在一起,以免它們跌下。
• 若插座鬆動不穩定,切勿插入插頭。
• 切勿把含二氧化碳或有氣飲料放在冷凍室內。
-
• 切勿把瓶子或玻璃容器放在冷凍室內。
這樣可能會引起觸電或火災。
• 放置本家電的地點必須能讓人在安裝後仍能操控
-
身損傷。
電源。
• 安裝電冰箱時必須接駁地線。
• 切勿在電冰箱附近噴灑易燃氣體。
- 你安裝電冰箱時必須接駁地線,以防漏電
-
或因電冰箱漏電造成觸電。
• 切勿使用氣體喉管、電話線或其他避雷針
作為地線。
- 地線使用不當可造成觸電。
• 切勿自行拆開或維修電冰箱。
-
裡面的東西結冰時,玻璃可能會爆裂,並導致人
這樣做可能引起火災、故障及/或人身損傷。
這樣做可能會引起爆炸或火災。
• 切勿直接在電冰箱內外噴水。
-
這樣做可能會引起火災或觸電。
• 切勿在電冰箱內儲存揮發性或易燃物品。
-
存放苯、稀釋劑、酒精、乙醚、液化石油氣及其
他類似物品都可能引起爆炸。
• 若你要度長假,你必須移除電冰箱內的所有物
品,並關上電冰箱電源。
安全資料 _03
DA99-02028F-06.indb 03
13. 6. 19.
1:54
• 切勿在電冰箱裡儲存藥物、科學物料或對溫度敏
感的產品。
-
童被鎖在裡面。
需嚴格控制溫度的產品不應放在電冰箱中。
• 切勿把盛滿水的容器放在電冰箱裡。
-
不到的地方,也不要放在電冰箱附近,以免兒
若打翻容器,可能會引起火災或觸電。
其他正確的其他秘訣
• 安裝本家電後應讓它靜待兩小時。
• 請勿強烈撞擊或過度用力推壓玻璃表面。
-
否則玻璃破碎可能會導致人身傷害和/或財產損
失。
• 如要發揮產品的最佳效能:
-
切勿把食物放在本家電後方的通風口前,這樣做
會阻礙冷凍室的通風。
清潔時須注意的符號
• 切勿把手指或其他物體插入出冰或出水孔通道。
-
這樣做可能會導致人身損傷或物品損壞。
• 清潔插頭時切勿使用濕布,清除電源插頭腳上異
物或塵埃。
-
否則可能會引起火災。
• 拔除電冰箱的插頭後應等待最少十分鐘才再插回
插頭。
-
把食物放在電冰箱的冷凍室前,請先妥善包好食
物或放在密封容器內。
-
切勿把要急凍的新鮮食物放在已經急凍許久的食
物旁邊。
• 切勿把含二氧化碳或有氣泡的飲料放在冷凍室
裡。
• 請遵從食物的最高儲存次數及急凍食物的有效日
期。
• 若你不使用電冰箱的時間在三個星期以下,則無
需拔除電冰箱電源,但若你不使用電冰箱的時間
達到三個星期或以上,請取出所有食物、拔除電
棄置時使用的警告符號
• 棄置本電冰箱或其他電冰箱時,請拆除門/門邊封條
及門閂,以免兒童或動物被困在內。
• 請把層架留在原處,以免兒童輕易爬入。
• R600a或R134a的用途是電冰箱雪種。請查閱本
家電後方的壓縮機標簽或冷藏室內的等級標簽,
了解電冰箱所使用的雪種。如本產品內含易燃
氣體(雪種R600a)時,請聯絡你當地的管理機
構,了解如何安全地棄置本產品。
• 保麗龍是電冰箱中的發泡絕緣氣體,要求特別的
棄置程序。請聯絡你當地的管理機構,以對環境
安全的方式棄置本產品。請確保本家電背部的喉
管在棄置前完全無損。喉管應在空曠的地方拆
除。
冰箱插頭,並清潔及抹乾內部。
• 如停電一兩個小時,電冰箱的溫度將不受影響。
但在停電期間內應減少開關電冰箱門的次數。若
停電時間超過24小時,請取出所有在冷凍室裡的
食品。
• 如電冰箱配備鎖及鎖匙,請把鎖匙放在兒童拿不
到的地方,也不要放在電冰箱附近。
• 若把本家電長時間放在設計電冰箱時預設的最低
溫度範圍內,可能無法正常操作(冷凍室裡的物
品可能會解凍或溫度過高)。
• 請勿儲藏在低溫狀況下會變質的食物如香蕉或瓜
類。
• 請把冰格放在生產商預設的位置,以達到最佳的
製冰效果。
• 這是無霜電冰箱,因此你無需自行除霜,它會自
動操作。
停電時請通知你當地的電力公司辦事處,並
注意
查詢停電將持續多久。
如停電一兩個小時,電冰箱的溫度將不受影響。
但在停電期間內應減少開關電冰箱門的次數。
若停電時間超過24小時,請取出所有急凍食品。
• 除霜時的溫度上升能符合ISO的要求,但若你要
避免除霜時急凍食物的溫度異常上升,請先用多
張紙張(如報紙)包裹急凍食物。
• 除霜時急凍食物的溫度一旦上升,將會縮短食物
的儲存期限。
如櫃門或外蓋配備鎖及鎖匙,請把鎖匙放在兒童拿
04_ 安全資料
DA99-02028F-06.indb 04
13. 6. 19.
1:54
目錄
安裝對門式電冰箱………………………………………………………………………………………………… 06
操作三星對門式電冰箱…………………………………………………………………………………………… 15
解決問題…………………………………………………………………………………………………………… 21
安全資料 _05
DA99-02028F-06.indb 05
13. 6. 19.
1:54
安裝對門式電冰箱
• 安裝電冰箱時前後左右及後面均須預留空
準備安裝電冰箱
間,這樣做可節省耗電及減低你的電費。
恭喜你購買三星對門式電冰箱。我們希望你喜歡這
部新家電所帶給你的多項新功能及效能。
選擇擺放電冰箱的最佳地點
• 選擇容易取得水源的地點。
• 切勿把電冰箱放在安裝溫度低於50℉(10℃)的地
方。
• 拆除冷凍室門前,應確保供水管已中斷。
請參閱下節「中斷供水管」的內容,以免損壞。
• 選擇不會直接曬到太陽的地點。
• 選擇平坦(或近乎平坦)的地面。
• 選擇附近空間足以輕易開啟電冰箱門的地點。
安裝、維修或清潔電冰箱的背面時,請確保
注意
將組件直向拉出,完成後把它直向放回。
• 使用時需要整體空曠的地方。請參閱下圖及尺寸。
• 請確保在需要維護及維修時,能自由移動本設備。
25mm
25mm
至少50mm
至少50mm
06_ 安裝
DA99-02028F-06.indb 06
13. 6. 19.
1:54
1. 關上冷凍室門,以螺絲起子拆除上門鉸外蓋
然後把兩端電線拉開 2 。
拆除電冰箱門
,
1
若電冰箱無法輕易地搬進你的家門,你可以拆除電
冰箱門。
1
1. 拆除前腳外蓋
2
首先拉開冷凍室門及電冰箱門,然後以逆時針方向
轉動三顆螺絲,拆除前腳外蓋。
3 及地腳螺
絲 4 ,並拆除上門鉸 5 。 當你拆除電冰箱門
時,小心不要讓門掉下來。
01 安裝
2. 以逆時針方向旋轉,拆除門鉸螺絲
4
3
中斷電冰箱的供水管
1. 按住連接器
1
,拉開並中斷供水管
2
。
5
3. 接著,小心地垂直舉起冰箱門,從下門鉸
始拆除冰箱門 7 。
6
開
7
6
1
2
切勿割斷供水管。輕力地把它從連接器拔除
即可。
2. 拆除冷凍室門
小心不要夾住電冰箱門上的水管和電線外
套。
4. 以六角扳手拆除下門鉸
8
。
以下是應先提出的注意事項。
• 提起冷凍室門時要確保門鉸保持垂直,不會彎曲
或折斷。
• 小心不要夾住電冰箱門上的水管和電線外套。
• 把電冰箱門放在保護充足的表面上,以免留下刮
痕或損壞。
安裝 _07
DA99-02028F-06.indb 07
13. 6. 19.
1:54
拆除冷藏室門
重新安裝電冰箱門
1. 關上門,以螺絲批拆除上門鉸外蓋
1
。
當你在預先安排的地點安全地放好電冰箱後,即可
重新安裝電冰箱。
重新安裝冷凍室門
1
1. 將供水管
1
插入冰箱門下方的角落,然後再穿
過下門鉸的小孔中 2 ,
以安裝冷凍室門。輕力地向下拉出,使它保持直
流,不要打結或彎曲。
2. 以逆時針方向旋轉,拆除門鉸螺絲 2 及地腳螺
絲 3 ,並拆除上門鉸 4 。當你拆除電冰箱門
時,小心不要讓門掉下來。
1
2
2
3
4
3. 小心地垂直舉起冰箱門
除冰箱門。
2. 把上門鉸的軸 3 插入冷凍室門角落的小孔中 4
。確保上門鉸的小孔 5 及冰箱上的小孔 6 之間
的門鉸保持水平,並以順時針方向上回門鉸螺絲
6
,從下門鉸
5
開始拆
7 與地腳螺絲 8 。
重新連接電線。
8
4. 輕力地向上提下門鉸,從托架
鉸 7 。
8
開始拆除下門
7
5
3
6
4
3. 上門鉸蓋 9 的前半部分應放在上門鉸
方,並重新上螺絲。
10
的前
10
9
08_ 安裝
DA99-02028F-06.indb 08
13. 6. 19.
1:54
重新安裝冷藏室的門
1. 把下門鉸
1
接回供水管
再次插入下門鉸的托架
2
。
1. 把供水管
2
插入連接器
1
。
1
2
3
角落中的小孔對準下門鉸
4
01 安裝
2. 確保冷藏室門
.
1
3
2
2. 水管必須完全插入透明聯結器的中心位置,以防
從飲水機漏水。
3. 將卡子插到安裝接頭處,並檢查卡子是否牢固地
卡住水管。
4
透明聯結器的中心位置
3. 把上門鉸的軸 5 插入門鉸的小孔中 6 。確保上
門鉸的小孔 7 及冰箱上的小孔 8 之間的門鉸保
持水平,並以順時針方向上回門鉸螺絲 9 及地
腳螺絲
10
。
卡子A (1/4”)
(6.35mm)
重新安裝前腳外蓋
在安裝外蓋前,請檢查連接器有沒有漏水。
以順時針方向上回三顆螺絲,重新安裝前腳
外蓋,如圖示。
4. 上門鉸蓋的前半部分
方,然後上回螺絲。
11
應放在上門鉸口
12
的前
12
11
安裝 _09
DA99-02028F-06.indb 09
13. 6. 19.
1:54
維持電冰箱水平
稍微調校電冰箱門
現在電冰箱門已經重新裝上,你要確保電冰箱保持
請緊記你必須保持電冰箱水平,才能確保電冰箱門
水平,才可作出最後的調節。如電冰箱未能保持水
平,電冰箱門就不可能完全一樣高。
完全一樣高。若你需要協助,請參閱前一節關於使
電冰箱保持水平的方法。
電冰箱前端的腳也是可以調校的。
當冷凍室的門高過電冰箱
冷藏室的門時
當冷凍室的門低過冷藏室的門
把一字螺絲批放入電冰箱腳上的凹槽,以順時針或
逆時針方向轉動,使冷凍室保持水平。以逆時針
調校部份
方向轉動三顆螺絲。
此時調校的方法是相同的。逐一打開每道門作出調
校,方法如下:
1. 從下門鉸以螺絲
電冰箱腳
批扭鬆螺帽 1 ,
直至它碰到有帽
3
六角匙
螺絲的上端
1
螺帽
2
2
。
有帽螺絲
螺絲批
當冷凍室門高過冷藏室的門
把一字螺絲批放入電冰箱腳上的凹槽,以順時針或
逆時針方向轉動,使冷藏室保持水平。
在你鬆開螺帽 1 時,必須使用隨附的六角扳
手 3 ,以逆時針方向扭鬆有帽螺絲 2 。然
後你應能扭開螺帽 1 。
2. 你可以順時針
或逆時針
方向轉動
有帽螺絲 2 ,藉
此調校門與門之
間的不同高度。
當你以順時針方向
電冰箱腳
螺絲批
請參閱下節,了解如何細微地調校電冰箱門
的方法。
3
六角匙
2
有帽螺絲
轉動時,門會上
升。
3. 調校好門的高度
後,應以順時針
方向
轉動
3
2
1
螺帽 1 ,直至它
達到有帽螺絲的
底部,然後以六角扳手
扳手
定螺帽 1 。
六角匙
3
有帽螺絲
螺帽
鎖緊有帽螺絲
鎖緊有帽螺絲,以固
若你不鎖緊螺帽,有帽螺絲可能會鬆脫。
10_ 安裝
DA99-02028F-06.indb 10
13. 6. 19.
1:54
4. 在連接水管及濾水器後,重新開你的主要供水大
檢查供水管(可選購)
飲水機是你新買的三星電冰箱的多個好用功能之
掣,讓它流出約一公升水,以清潔及盛滿濾水
器。
一。三星濾水器可以過濾水裡的多餘微粒,給你
更健康的飲用水,這濾水器不會消毒或殺死微生
關閉主要水管
物,你要購買淨水系統才能達到這個效果。為了讓
製冰機正常操作,水壓要維持在138至862Kpa之
01 安裝
間。在正常情況下,它可在十秒內盛滿一個170毫
升的紙杯。如果安裝電冰箱的地區水壓很低(低於
138Kpa),你可以安裝加壓器增加水壓。請確保
電冰箱裡的水槽盛滿水,你只須按飲水機控制桿,
直到水從出水口流出,就可以開始為電冰箱的水槽
裝水。
本電冰箱隨附供水管安裝組合。你可以在冷
凍室抽屜中找到。
關閉主要水管
無空隙
把供水管連接到電冰箱
1. 除下裝置上供水管的外蓋,並在把機身水管從原
有水管拆除後把壓縮螺帽插入機身水管。
2. 連接機身上的供水管及附在套裝中的供水管。
安裝供水管
內置式型號
3. 把壓縮螺帽上緊至壓縮裝置,小心兩者之間不要
有任何空隙。
4. 開水掣,檢查有沒有漏水。
安裝供水管時需用的零件
2 水管連接器
1 供水管固定器及螺絲
移除外蓋
鬆開 a
機身的供水管
3 供水管
4 濾水器
全無空隙
機身的供水管
連接供水管
只可把供水管連接至飲用水源。
1. 首先關閉供水大掣。
2. 找出距離最近的可飲用冷水食水供水管。
若你要維修或拆開供水管,應切斷6.5毫米塑
膠管,以確保連接緊密,不會漏水。
3. 遵照安裝組合裡的供水管安裝指示。
注意
使用前應檢查這些地方會不會漏水。
注意
供水管必須連接到冷水管。若連接至熱
水管,淨水器可能會故障。
安裝 _11
DA99-02028F-06.indb 11
13. 6. 19.
1:54
• 三星保固不包括水管線路安裝。
• 除非零售價已包括安裝費用,否則有關工序將由
安裝供水管
顧客自費負責。
• 如有需要,請聯絡水管工人或授權的安裝人員進
外接式型號
行安裝。
安裝供水管的零件
• 若因安裝不當而漏水,請聯絡安裝人員。
水管連接器
供水管固定器及螺絲
供水管
淨水器鎖夾
淨水器
安裝供水管
以連接器連接水管及水龍頭。
1. 關閉主要的水龍頭。
2. 安裝連接器「A」至水龍頭。
注意
供水管必須連接到冷水管。若將之連接到熱
水管,可能會導致淨水器故障。
保養資料
電冰箱或製冰器生產商的保養不包括供水管的安裝。請
小心依照這些指示,以減低繳付高昂水費的機會。
注意:
若連接器不能與你所使用的水龍頭吻合,請到鄰近的授
權服務經銷商,購買正確的連接器配件。
選擇要安裝淨水器的地點。(附有淨水器
的型號)
-
若你想在安裝淨水器時重新安裝淨水器的進水口
及出水口兩邊,請參考圖示。
在量度淨水器與冷水的水龍頭之間的距離後,
把附在淨水器上的供水管在適當位置剪下。
12_ 安裝
DA99-02028F-06.indb 12
13. 6. 19.
1:54
排走淨水器內的殘餘物質。(附淨水器的
型號)
連接器「A」
水龍頭
開主要供水大掣的水龍頭,檢查有沒有水流經淨
-
水器在入水口一邊的水管。
如果水沒有從水管流出,檢查有沒有開水龍頭。
-
出水口
開啟水龍頭,直到淨水及生產期間的殘餘物質流
出。
淨水器出水口
的一邊
90度
淨水器
注意
裝好水管後,插入固定夾。
淨水
水
淨水器入水口的一邊
01 安裝
淨水器的
側邊
-
連接器
供水管
固定夾
更換指示
安裝淨水器鎖夾
1. 關閉供水。
2. 注意濾水器的水流方向。
3. 將供水管插入濾水器的入水口一邊,直到無法繼
-
將淨水器鎖夾固定在適當位置(如在洗碗水盆
下),並用螺絲牢牢固定。
續插入為止。
流動方向
淨水器鎖夾
透入
供水入水口的一邊
注意 :
你必須同時確保裁切口垂
直,沒有任何斜角,以免
漏水。
固定淨水器的位置。
-
4. 插入水管後應用力夾緊固定夾。固定夾會固定水
管位置。
如右圖,固定淨水器的位置。
水管
淨水器鎖夾
淨水器
5. 開水掣,檢查有沒有漏水。如有漏水,請重複步
驟1、2、3及4。若它仍然漏水,請停止使用,並
聯絡經銷商。
6. 濾水器在使用前應先要沖洗五分鐘。
安裝 _13
DA99-02028F-06.indb 13
13. 6. 19.
1:54
安裝供水管到電冰箱。
檢查冰盤 的供水量。
-
拆除電冰箱的壓縮機上蓋。
1. 向上提起製冰籃並輕輕從冰箱拉出。
-
如圖示,把供水管連接至活門。
安裝好後,檢查有否漏水。如有漏水,請重新連
2. 當你按測試鍵三秒時,製冰格會旋轉,冰塊容器
將盛滿來自供水水龍頭的水。
-
接過程。
留新裝上電冰箱的壓縮機上蓋。
若水位過低,做出的冰塊會較小。這是基於主水
管內的水壓問題,而不是電冰箱的問題。
供水管
1
連接螺帽
電冰箱壓縮機上蓋的指示
製冰器
固定供水管。
-
以固定夾「A」固定供水管在牆
上的位置(電冰箱背後)。
固定好供水管後,確保供水管沒
有彎曲、被夾著或壓著。
固定夾 A
旋臂
供水管
檢查水位
安裝淨水器後應排出供水管中的殘餘物質。
1. 開主要供水大掣,並關上供水管的活門。
2. 讓水流經飲水機,直至流出的是清水(約一公
升),這樣做可以清潔供水系統,並排出水管內
的空氣。
3. 在部分住宅內,可能需要額外沖洗多次。
4. 打開電冰箱門,確保濾水器沒有漏水。
新安裝的濾芯可能會讓小量水從飲水機噴
出,其原因是有空氣進入水管內。這情況應
該不會對操作構成任何問題。
2
測試鍵
使用抗水珠加熱器開關
當室內濕度過高時,飲料架及飲水機附近可能會凝
結水珠。
開啟抗水珠加熱器開關以去除水珠,在水珠消失時
關閉開關。
RS21/23H** (可選購)
14_ 安裝
DA99-02028F-06.indb 14
13. 6. 19.
1:54
操作三星對門式電冰箱
操作電冰箱
5
快速冷凍鍵
使用控制板 / 使用數碼顯示屏幕
6
5
1
兒童鎖功能
6
2
7
7
3
冷凍鍵
4
同時按快速冷凍鍵及冷藏鍵三秒,
即可鎖上所有鍵,飲水機控制桿及
冰塊控制桿也無法操作。如同時
按這兩個鍵三秒,即可取消這個
功能。
02 操作
冷凍選擇型號
按這個鍵可快速地讓電冰箱回到原
本設定的溫度。再按這個鍵則可取
消快速冷藏模式。
按冷藏鍵即可設定你理想的冷藏
室溫度。你可以設定在1℃至7℃
(34℉至45℉)之間的溫度。
分配器型號
如果您使用Power Freeze (快速冷凍) 功能,
冰箱能耗將增加。
請記住,當不需要此功能時關閉它,並將冷
凍室溫度返回到原來的溫度設定。
如果您需要冷凍大量的食物,則至少要在24
小時之前啟動快速冷凍功能。
正常型號
不使用顯示屏的時候會自動關閉,是正常現象。
1
快速急凍鍵
2
急凍鍵
3
冰塊類型鍵
4
更換濾水
器鍵
它能加快在冷凍室內急凍產品的速
度。當你要急凍易腐壞的食物,或
是冷凍室的溫度大幅上升時(如冷
凍室的門沒有關),這個功能可以
很有用。
按「急凍鍵」設定你想要冷凍室溫
度,你可以設定在-14℃(8℉)
至-25℃(-14℉)之間的溫度。
以這個鍵選擇Cubed(冰塊)
、Crushed(碎冰),或是關閉製
冰功能。
你在更換濾水器時,應按這個鍵三
秒,以重設濾水器的時間。
操作 _15
DA99-02028F-06.indb 15
13. 6. 19.
1:54
控制溫度
使用冰塊及冷水飲水機
控制冷凍室的溫度
按冰塊類型鍵,選擇你要的冰塊類型
你可以設定冷凍室溫度在-14℃(8℉)至-25℃
(-14℉)之間,以符合你的特別需要。重複按 「冷
凍室」鍵,直到溫度顯示屏幕顯示你想要的溫度。
請緊記雪糕等食物在-16℃(4℉)時可能會融化。
顯示的溫度數字會在-14℃(8℉)至-25℃(-14℉
)之間加減。當顯示屏幕上的讀數達到 -14℃(8℉
)時,它會在-25℃(-14℉)重新開始。
在新溫度設定五秒後,顯示屏幕會再次顯示當時冷
凍室的正確溫度,不過當冷凍室調校至新的溫度
時,這個數字將會更改。
無冰塊
若你要關閉製冰機,請選
擇這個功能。
控制冷藏室的溫度
你可以把冷藏室的溫度設定在7℃ (46℉)至1℃
(34℉)之間,以符合你的特別需要。重複按冷
凍鍵,直到溫度顯示屏幕顯示你想要的溫度。冷藏
室的溫度控制程序及冷凍室的溫度控制程序相同。
按冷藏鍵來設定你想要的溫度。數秒後,冷藏室就
會開始追上新設定的溫度,並顯示在數碼顯示屏幕
上。
若你經常開關冷凍室或電冰箱門,或把大量
溫熱食物放進任何一格,裡面的溫度可能會
上升。這樣做會導致數碼顯示屏幕閃動。當
冷凍室及冷藏室的溫度降至正常水平,顯示
電冰箱製作的冰是冰塊。當你選擇
「Crushed」(碎冰)時,製冰機會磨碎冰
塊為碎冰。
取出冰塊
把玻璃杯放在冰塊出口下方,用杯子輕力地向冰控制
桿推前。請確保杯子對準出冰口,以免冰塊彈出。
屏幕就會停止閃動。如果它仍繼續閃動,你
或許需要「重設」電冰箱。可嘗試拔除本家
使用飲水機
電的插頭,等待十分鐘後再插回插頭。
把玻璃杯放在出水口下方,用杯子輕力地向出水控
制桿推前。請確保杯子對準出水口,以免水濺出。
16_ 操作
DA99-02028F-06.indb 16
13. 6. 19.
1:54
• 切勿把你的手指、手或其他不適當的物體
警告
放在通道或製冰桶內。
- 這樣做可能會導致人身損傷或物品損壞。
• 切勿把手指或其他物體放在出水口/出冰口。
- 這樣做可能會導致損傷。
• 只可使用電冰箱附送的製冰器。
• 本電冰箱使用的水源必須只由合資格人員安裝/
能正常操作。
快速冷卻
• 您可以搭配冷凍自選區TM使用快速冷卻功能。
• 「快速冷卻」功能可在六十分鐘內冷卻1~3瓶罐
裝飲料。
• 再次按下「快速冷卻」鈕,即可取消此功能。
冷凍自選區TM會回到之前設定的溫度。
• 結束「快速冷卻」。會回到「Cool」的溫度設定
值。
02 操作
連接,並只可連接至飲用水源。
• 水壓必須保持在138 至862 Kpa之間,製冰器才
使用冷凍自選區 抽屜(可選購)
• 若你要長時間出差或外遊而不使用製冰器
注意
或飲水機的兩個出口,請關閉水閥。
- 否則可能會漏水。
• 應把內部多餘的水抹掉,並打開電冰箱門。
- 否則可能會發臭及發霉。
解凍
• 滴液流失(Drips loss)及肉類變質會降低食物
的新鮮度。
• 在選擇「解凍」後,會將冷熱空氣交替送入冷凍
自選區TM置物盒。
• 您可以按照肉品的重量,選擇4小時、6小時、10
小時及12小時的解凍時間。
• 結束「解凍」時,冷凍自選區TM 顯示畫面會回
到「Zero Zone」的情況。
• 結束「解凍」時,肉品裡即無肉汁,為半冷凍狀
態,可輕鬆切割進行烹煮。
• 按下「解凍」鈕以外的任一鈕,即可取消此選
項。
• 以下為魚肉的概略解凍時間。(以一吋厚度為
準)
為了獲得更多的空間,您可以移除頂部冷凍抽
屜,因為它不影響熱特性和機械特性。冷凍室的
標稱儲藏容量是根據取出此抽屜後計算而來的。
解凍時間
重量
4 小時
363g (0.8lb)
6 小時
590g (1.3Ib)
10 小時
771g (1.7Ib)
12 小時
1000g (2.2Ib)
不同大小及厚度的魚肉,需要不同的解凍時
間。
上述重量為在冷凍自選區TM置物盒裡的食品
總重量。
例) 400g冷凍牛肉及600g冷凍雞肉共需10小
時的解凍時間。
警告
使用「解凍」選項,食物即無需在冷凍自選
區TM裡進行解凍。應取出置物盒。
操作 _17
DA99-02028F-06.indb 17
13. 6. 19.
1:54
Soft Freeze
拆除冷凍室配件
• 使用「Soft Freeze」功能時,無論您設定冰箱的
清潔及重新安置冷凍室的內部實在易如反掌。
溫度為幾度,數位面板上的溫度均為-5℃。
• 「Soft-Freeze」的溫度可延長魚肉的保鮮時間。
• 可輕鬆切割肉品,不會滴水。
1. 把層架拉盡後可取出玻璃層架,然後輕力抬高並
拆出層架。
Zero Zone (0℃)
• 使用「Zero Zone」功能時,無論您設定冰箱的
溫度為幾度,冷凍自選區TM置物盒的溫度均會
維持在0℃。
• 「Zero Zone」的溫度可延長魚肉的保鮮時間。
2. 如要拆除門邊儲物盒,可以雙手抬高儲物盒。
Cool(冷卻)
• 使用「Cool(冷卻)」功能時,溫度會與您設定
冰箱的溫度一致。數位面板上的溫度與顯示面板
上的溫度一致。
• 冷凍自選區TM置物盒可擴充冰箱的儲物空間。
3. 如要拆除塑膠抽屜,可輕力拉出及抬高抽屜。
冰箱裡的不同飲料,需要不同的冷卻時間。
警告
使用「快速冷卻」功能時,應取出冷凍自選
區TM置物盒裡的食物。
4. 如要拆除製冰桶,可輕力拉出及抬高抽屜。
拆除外蓋時切勿太用力,否則外蓋可能裂並
造成損傷。
18_ 操作
DA99-02028F-06.indb 18
13. 6. 19.
1:54
拆除任何配件前,應先確保沒有食物在中途
拆除冷藏室配件
阻隔。可以的話,把食物一同取出,以減低
發生意外的危險。
1. 如要拆除防滲漏層架,可輕力拉出並抬高層架。
为了使本产品达到最佳能效,请按照第17页
上的图示,将所有搁板、抽屉和篮筐
放回原位。
2. 按Veggie Box(蔬果抽屜)/Dry Box(乾貨盒)
警告
外蓋左右內側的凹槽,然後
直接拉出蔬果盒/ 乾貨盒。你
可單手握住抽屜,在向前推
出時稍為抬高,即可把它拉
出冷藏室。
災。
注意
3. 雙手握住Gallon Door Bin(飲料門邊儲物盒),
輕力抬高即可取出
切勿使用苯、稀釋劑或Clorox 漂白水進行
清潔。
它們會損壞本家電的表面,也可能引起火
02 操作
清潔電冰箱
當電冰箱接上電源時,切勿把水灑在上面,
這樣做可能會造成觸電。切勿使用苯、稀釋
劑或車用清潔劑來清潔電冰箱,以免引起火
災。
更換內燈
如果要更換 LED 燈,請聯絡維修工程師,讓
他們更換。
4. Z形層架附在電冰箱機身上。
把酒架向上推,然後輕力抬高,即可取出酒架。
小心不要從上下左右顛倒安裝Z形層架。
注意
操作 _19
DA99-02028F-06.indb 19
13. 6. 19.
1:54
6. 完成這個程序後,按冰塊類型鍵三秒,以重設濾
更換濾水器
為降低水份損壞本產品的風險,請勿
警告
在 SAMSUNG 電冰箱中使用其他品牌的
濾水器。請僅使用 SAMSUNG 品牌濾水
水器的時間表。
7. 最後,以飲水機排走一公升的水。飲用前必須確
保水流清徹乾淨。
器。SAMSUNG 將不承擔任何損害的法律責
任,包括但不限於因為使用其他品牌濾水器
而導致漏水所造成的財產損失。SAMSUNG
電冰箱僅能搭配 SAMSUNG 濾水器使用。
當「濾水器指示器」顯示燈亮著時,表示要更換濾
水器濾芯。當過濾器指示器的燈轉至紅色,表示更
換過濾器。指示燈會在當時使用的濾水器容量用完
前須先亮著,讓你有時間購買新的濾芯。準時更換
濾水器可讓你從冷藏室飲用到最新鮮、最乾淨的
新安裝的濾芯可能會讓小量水噴出飲水機,
原因是有空氣進入了水管中。操作時應不會
水。
構成問題。
1. 從抽屜中取出濾水器,並圖示貼上月份指
示貼紙。
2. 在濾水器上貼上一張註明六個月後的日期
訂購替換濾水器
請聯絡授權的三星經銷商,以訂購濾水器的濾芯。
貼紙。例如你在三月份安裝濾水器,應在
濾水器上貼寫有「九月」的貼紙,以提醒
你在九月時必須更換。這樣你就知道更換
濾水器的時間。一般濾水器的使用壽命約
為六個月。
3. 接著,從逆時針方向轉動並拆除固定蓋。
4. 拆除新濾水器的保護蓋,然後拆除舊的濾
水器。
使用電冰箱門
5. 將新濾水器放在濾水器外蓋。
慢慢地以順時針方向轉動濾水器90°,對
準蓋子上的指示刻度,然後鎖緊濾水器。
確保顯示刻度對準「鎖」的位置。請緊記
自動關上。
電冰箱門的開關門有特別設計的功能,可確保門完
全關上及安全密封。
如開門的幅度達到某一點,電冰箱門會「卡住」,
並保持開啟。若電冰箱門未達到卡住的一點,門會
不要鎖得太緊。
濾水器外蓋
1
2
貼紙
(月份指示器)
4
3
5
對準指示刻
度及鎖
的位置
20_ 操作
DA99-02028F-06.indb 20
13. 6. 19.
1:54
解決問題
解決方法
電冰箱不能正常操作或不
•
檢查電源插頭已妥善插好。
能有效地冷卻食物。
•
顯示屏幕上的溫度控制是否設定至正確的溫度?嘗試把溫度定得低一點。
•
太陽是否曬到電冰箱或太接近熱來源?
•
電冰箱的背部是否太接近牆壁,以致空氣不能流通?
•
顯示屏幕上的溫度控制是否設定至正確的溫度?嘗試把溫度定得高一點。
•
室溫是否太低?
•
你是否在電冰箱最冷的地方儲存水分豐富的食物?嘗試把這些食物放在電冰箱
冷藏室裡的食物被急凍。
03 解決問題
問題
中央,而不要儲存在冷凍自選區 抽屜中。
你聽到奇怪的聲響。
•
檢查電冰箱是否保持水平。
•
電冰箱的背部是否太接近牆壁,以致空氣不能流通?
•
是否有東西掉在電冰箱後面或下面?
•
你聽到電冰箱裡有「滴答聲」。這是正常的,因為電冰箱內部的溫度使各種配
件收縮或膨脹。
本家電的前角落及側邊發
熱,還有水凝結。
•
在電冰箱前面的角落因塗有防止凝結的抗凝劑,因此發熱是正常的。
•
電冰箱門有否打開?長時間打開電冰箱門可使水凝結。
冰塊不能放出。
•
安裝好供水管後,你有否在製冰前要等十二個小時?
•
供水管是否經已安裝,而止水閥已打開?
•
你有否手動關閉製冰功能?應確保冰塊類型設定為Cubed(冰塊)或Crushed
(碎冰)。
•
有否冰塊被卡在冰塊儲存盒中?
•
冷凍室的溫度是否太高?嘗試把溫度定得低一點。
你聽到電冰箱裡有冒泡聲。
•
這是正常的。泡沫聲來自雪種液體在電冰箱裡循環。
電冰箱裡有惡臭。
•
有否食物腐壞?
•
確保有強烈異味的食物(如魚肉)在儲存前先好好密封。
•
應定期移除電冰箱內的所有物品,並丟掉所有腐壞或可疑的食物。
•
通風口是否不暢通?請移除任何阻塞物品,使空氣流通。
•
各種食物之間要有充足的空間,以便空氣流通。
•
冷凍室的門是否閉緊?
•
供水管是否經已安裝,而止水閥已打開?
•
供水管有否被擠壓或打結?確保水管暢通,沒有任何物品阻塞。
•
電冰箱溫度是否過低,以致水缸結冰?可嘗試在主要顯示屏幕選擇較高溫度。
冷凍室的內壁結霜。
飲水機不能操作。
解決問題 _21
DA99-02028F-06.indb
4:21
13. 6. 19.
1:54
備註
DA99-02028F-06.indb
4:22
13. 6. 19.
1:54
備註
DA99-02028F-06.indb
4:23
13. 6. 19.
1:54
周圍室溫限制
本冰箱設計為在標牌上標記的溫度等級所指定的環境溫度下使用。
等級
符號
亞溫帶
SN
環境溫度範圍 (℃)
+10 至+32
溫度
N
+16 至+32
亞熱帶
ST
+16 至+38
熱帶
T
+16 至+43
冰箱的內部溫度受冰箱所在位置、環境溫度和打開冰箱門的頻率等因素的影響。根據對
這些因素的補償調節所需的溫度。
正確棄置本產品
(廢棄電子和電器設備)
繁體中文
(適用於採用獨立回收系統的國家)
產品、配件或技術資料上的本標誌表示產品及其配件(例如:充電器、耳機、USB 傳輸線)在其
使用壽命結束後不得與其他家庭廢品一起棄置。為避免環境或人類健康因廢棄物不受管控而可能
受到傷害,請將這些項目與其他類型的廢品分開處置,並負責任地進行回收,以促進材料資源的
永續利用。
家庭使用者應聯絡購買本產品的零售店,或相關的當地政府機構,以取得出於保護環境的目的,
可在何處和如何回收這些項目的詳細資訊。
商業使用者應聯絡其供應商並參考購買合同的條款和條件。本產品及其電子配件不得與其他商業
垃圾混在一起棄置。
三星全球服务网
如果您对三星产品有任何咨询或建议, 请联系三星客服中心
100102 北京市朝阳区利泽中二路二号B座三层(望京科技园内)
三星电子(北京)技术服务有限公司
400-810-5858
www.samsung.com
Customer Service Center
Unit 506-508, Shui On Centre, 6-8 Harbour Road, Wan Chai, Hong Kong
Tel : (852) 3698 4698
www.samsung.com/hk (Chinese)
www.samsung.com/hk_en (English)
DA99-02028F-06.indb
4:24
13. 6. 19.
1:54
Download PDF