Samsung | LA26A350C1 | Samsung LA26A350 User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
三星全球服务网
如果您对三星产品有任何咨询或建议, 请联系三星客服中心。
2862 6001
www.samsung.com/hk
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model
BN68-01507K-00
BN68-01507K-Cover_0306.indd 1
Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more information)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce
the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01507K-Eng_0312.indd 1
Connecting and Preparing Your TV
 List of Parts......................................................... 2
 Installing the Stand.............................................. 2
 Installing the Wall Mount Kit................................ 2
 Viewing the Control Panel................................... 3
 Viewing the Connection Panel............................ 4
 Viewing the Remote Control................................ 7
 Installing Batteries in the Remote Control........... 8
 Switching On and Off.......................................... 8
 Placing Your Television in Standby Mode........... 8
 Viewing the Menus.............................................. 9
 Using the TOOLS Button..................................... 9
 Plug & Play........................................................ 10
Function Description
 Choosing Your Language.................................. 25
 Melody / Entertainment / Energy Saving . ........ 26
 Selecting the Source......................................... 27
 Editing the Input Source Names....................... 28
Setting the PC
 Setting up Your PC Software
(Based on Windows XP)................................... 29
 Display Modes................................................... 29
 Setting up the TV with your PC......................... 30
About Anynet+
Setting the Channels
 Storing Channels Automatically.........................11
 Storing Channels Manually............................... 12
 Adding / Locking Channels............................... 13
 Sorting the Stored Channels............................. 14
 Assigning Channels Names.............................. 14
 Fine Tuning Channel Reception........................ 15
Setting the Picture
 Changing the Picture Standard......................... 16
 Adjusting the Custom Picture............................ 17
 Configuring Detailed Settings on the Picture.... 17
 Resetting the Picture Settings to the
Factory Defaults................................................ 18
 Changing the Picture Options........................... 19
 Viewing the Picture In Picture (PIP).................. 21
Setting the Sound
 What is Anynet+? ............................................. 31
 Connecting Anynet+ Devices............................ 31
 Setting Up Anynet+........................................... 32
 Scanning and Switching between
Anynet+ Devices............................................... 33
 Recording.......................................................... 35
 Listening through a Receiver............................ 35
 Check Points before Requesting Service.......... 36
Recommendations For Use
 Teletext Feature................................................ 37
 Wall-Mount Adjustment (Sold separately)
(LA32A350, LA37A350, LA40A350)................. 39
 Using the Anti-Theft Kensington Lock
(depending on the model)................................. 40
 Troubleshooting: Before Contacting
Service Personnel............................................. 41
 Technical and Environmental Specifications .... 42
 Sound Features................................................. 22
 Selecting the Sound Mode................................ 23
 Connecting Headphones (Sold separately)...... 23
Setting the Time
 Setting and Displaying the Current Time........... 24
 Setting the Sleep Timer..................................... 24
 Switching the Television On and Off
Automatically..................................................... 25
Symbol
Press
Note
One-Touch
Button
English - 1
BN68-01507K-Eng_0312.indd 1
English
Contents
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control &
Batteries
(AAA x 2)
➣
➣
Power Cord
Cover-Bottom
Stand Screw X 4
Stand
Cleaning Cloth
 Owner’s Instructions
 Warranty card
 Safety Guide
 Registration Cards
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
2
1
1. Connect your LCD TV and the stand.
➣ Two or more people should carry the TV.
➣ Make sure to distinguish between the front and back of the stand when assembling them.
2. F
asten two screws at position 1 and then fasten two screw at position 2.
➣ Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side.
➣ The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury due to electric shock.
➣
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English - BN68-01507K-Eng_0312.indd 2
Viewing the Control Panel
Side Panel buttons
1
2
3
4
5
6
8
8
7
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input
sources (TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as
you use the ENTER button on the remote
control.
5 (Power)
Press to turn the TV on and off.
6 Remote Control Sensor
Aim the remote control towards this spot on the TV.
7
2 MENU
Press to see an on-screen menu of your TV’s 8
features.
3
+ VOL Press to decrease or increase the volume.
In the on-screen menu, use the + VOL buttons as you use the ◄ and ► buttons on the remote control.
4 CH
Press to change channels. In the on-screen
menu, use the CH buttons as you use
the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
English - BN68-01507K-Eng_0312.indd 3
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Speakers
Viewing the Connection Panel
LA40A350
[TV Rear Panel]
1
[TV Side Panel]
2
3
4 5
6
3
AV IN 2
7
Power Input
8
0
9
LA26A350, LA32A350, LA37A350
[TV Rear Panel]
4
3
5
2
[TV Side Panel]
3
AV IN 2
1
7
8
6
0
9
Power Input
➣ The product colour and shape may vary depending on the model.
➣ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣ When connecting an external device, match the colour of the connection terminal to the cable.
English - BN68-01507K-Eng_0312.indd 4
AV IN 2
1 PC IN [PC] / [AUDIO]
- Connect to the video and audio output jack on your PC.
2 Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
3HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣ What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
➣ Supported modes for HDMI/DVI and Component
480i
480p
576i
576p
720p
1080i
1080p
HDMI/DVI 50Hz
x
x
x
o
o
o
o
HDMI/DVI 60Hz
x
o
x
x
o
o
o
Component
o
o
o
o
o
o
o
4 AUDIO OUT [R-AUDIO-L]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
to corresponding audio in connectors on the Amplifier or DVD Home Theatre.
5ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 SERVICE
- LA26A350
Connector for SERVICE only.
- LA32A350, LA37A350, LA40A350
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
English - BN68-01507K-Eng_0312.indd 5
7 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
out connectors on the A/V device.
8Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
9Kensington Lock (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the Kensington Lock may be different depending on its model.
0 COMPONENT IN
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
English - BN68-01507K-Eng_0312.indd 6
Viewing the Remote Control
1Television Standby button
2Selects the TV mode directly
3Number buttons for direct
channel access
4One/Two-digit channel selection
5+ : Volume increase
: Volume decrease
6Temporary sound switch-off
7Displays the Channel List on
screen
8Use to quickly select
frequently used functions.
9Use to see information on the current broadcast
0Colour buttons :
Use these buttons in the
Channel list, etc.
@Press to select the optional
display and sound modes for
sports, cinema and games.
# Use these buttons in the
DMA, and Anynet+.
(
: This remote can be
used to control recording on
Samsung recorders with the
Anynet+ feature)
$Available source selection
%Previous channel
^P : Next channel
P : Previous channel
&Displays the main on-screen
menu
*SRS TS XT selection.
(Returns to the previous
menu
)Control the cursor in the menu
aExit the on-screen menu
➣
b Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.(The DMA button is
optional.)
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
“Anynet+(HDMI-CEC)" is “On”
(see page 32)
cPicture size selection
dSelects the HDMI mode
directly.
e Picture effect selection
Teletext Functions
2Exit from the teletext display
7Teletext store
8Teletext size selection
9Teletext reveal
0Fastext topic selection
!Alternately select Teletext, Double, or Mix.
$Teletext mode selection (LIST/FLOF)
%Teletext sub page
^P : Teletext next page
P : Teletext previous page
&Teletext index
(Teletext hold
aTeletext cancel
The performance of the remote control may be affected by bright light.
English - BN68-01507K-Eng_0312.indd 7
SRS
TOOLS
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
➣ Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
➣ Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣ The standby indicator lights up on your set.
2. Press the button on your set.
➣ You also can press the POWER button or the TV button on the remote control to turn the TV
on.
➣ The channel that you were watching last is reselected automatically
3.Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or CH button on your set.
➣ When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
➣ The screen is turned off and a red standby indicator appears on your set.
2.To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or
channel up/down ( / ) button again.
➣ Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial. English - BN68-01507K-Eng_0312.indd 8
Viewing the Menus
TV
1. W
ith the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s submenu.
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
3. Press the EXIT button to exit.
Move Enter
Return
he on-screen menus disappear from the screen after about
T
one minute.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending
on which external input mode you are viewing.
1. P
ress the TOOLS button.
The “Tools” menu will appear.
2. P
ress the ▲ or ▼ button to select a menu.
3. P
ress the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
• Anynet+ (HDMI-CEC), see page 32
• Picture Mode, see page 16
• Sound Mode, see page 22
• Sleep Timer, see page 24
• SRS TS XT, see page 22
• Energy Saving, see page 27
• Dual l-ll, see page 23
• PIP, see page 21
• Auto Adjustment, see page 30
English - &2/)RKCMRHH
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual l-ll
Move Enter

7
95
45
50
50
50



: Standard
: Custom
: Off
: Off
: Off
: Mono
Exit
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK"
selected.
2.Select the appropriate language by pressing the ▲ or ▼
button.
Press the ENTER button to confirm your choice.
Plug & Play
Start Plug & Play.
OK
Enter
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER button.
Select the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼ button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
 Language: Select your language.
 Area: Select your area.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
English - 10
BN68-01507K-Eng_0312.indd 10
If you want to reset this feature...
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup" then press the ENTER button.
2.Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 10.
➣ The “Plug & Play” feature is only available in the TV mode.
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Enter







Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your area).
Automatically allocated programme numbers may not correspond
to actual or desired programme numbers. However, you can sort
numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ENTER
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
button to select "Area".
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER
button.
5. Press the ENTER button.
➣ The TV will begin memorizing all of the available channels.
➣ Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
English - 11
BN68-01507K-Eng_0312.indd 11
Storing Channels Manually
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
to identify.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2.Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER button.
3.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
4.When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Manual Store
Programme Colour System Sound System Channel Search Store Move :P1
: Auto
: BG
:S6
: 140 MHz
:?
Enter


Return
♦ Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
♦ C
olour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
− Press the ▲ or ▼ button to select the required colour standard.
♦ S
ound System: BG/DK/I/M
− Press the ▲ or ▼ button to select the required sound standard.
♦ Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
♦ S
tore (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER button.
Channel mode
−
P
(Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
−
C
(Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
−
S
(Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 12
BN68-01507K-Eng_0312.indd 12
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER button.
4.Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
➣
➣
If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
➣ A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT button to exit.
elect "On" or "Off" in "Child Lock" to easily turn the
S
channels which selected on " " to be active or inactive.
You can select these options by simply pressing the CH LIST button on the remote control.
English - 13
BN68-01507K-Eng_0312.indd 13
Enter
Return
Channel List
Child Lock
: Off
" " is active when "Child Lock" is selected to "On".
➣
Move Channel Manager
TV
If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
♦ Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.
6.Select "On" by pressing the ▲ or ▼ button, then press the
ENTER button.
7. Press the ▲ or ▼ button to select "Channel List",
then press the ENTER button.
8.Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
➣







Move Enter
Return
Channel List
P 1 C3
1 / 10
Prog.
0
C--
1
C3
2
BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return


Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3.Select the channel number that you wish to change by
pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
➣ The selected channel number and name are moved to
right side.
4.Press the ▲ or ▼ button to move to the position in which you
would like to change and then press the ENTER button.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Sort
Prog.
0
1
2
3
4
5
6
7
8
9
Ch.

C--
C23
S06
S07
S09
S12
S13
S14
S17
C21

Move Name
---------
---------------------------------
Enter

Return
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER
button.
➣ The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER
➣
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Prog.
0
1
2
3
4
5
6
7
8
9
Ch.

C--
C23
S06
S07
S09
S12
S13
S14
S17
C21

Move button
The following characters are available: Letters of the alphabet (A~Z) / Numbers
(0~9) / Special characters (+, -, *, /, space)
6. Press the EXIT button to exit.
English - 14
BN68-01507K-Eng_0312.indd 14
Return
Name
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
Enter







Name
---------
---------------------------------
Enter
Return
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
5. Press the EXIT button to exit.
➣
Return
P1
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the channel
number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the ENTER button.
English - 15
BN68-01507K-Eng_0312.indd 15
Enter
Fine Tune
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
➣
Move 0
Reset
Adjust Save







Return
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER
button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
4. Press the EXIT button to exit.
Move Enter
TV
♦ Dynamic: Selects the picture for high-definition in a bright
room.

7
95
45
50
50
50



Return
Picture
Mode
: Standard
Dynamic
Backlight
7
Standard
Contrast
95
Movie
Brightness 45
Sharpness 50
Colour 50
Tint
G 50
R 50
Detailed Settings
Picture Options
Reset
: OK
♦ Standard: Selects the picture for optimum display in a
normal environment.
♦ Movie: Selects the picture for comfortable display in a
dark room.
T
he Picture mode must be adjusted separately for each
input source.
Move Enter
Return
O You can also press the P.MODE button on the remote
control to select one of the picture settings.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
◄ Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
English - 16
BN68-01507K-Eng_0312.indd 16
Move Adjust
Exit
►
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 16)
2.Press the ▲ or ▼ button to select a particular item. Press the
ENTER button.
3.Press the ◄ or ► button to decrease or increase the value of
a particular item. Press the ENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
♦ Contrast: Adjusts the lightness and darkness between
objects and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either
sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or
darker.
♦ Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
TV
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move Enter
Return
▲
Backlight
▼

7
95
45
50
50
50



7
Move Adjust Return
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)
In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)
TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
5. When you are satisfied with your setting, press the
ENTER button.
6. Press the EXIT button to exit.
➣
"Detailed Settings" is available in "Standard" or "Movie"
mode.
➣
In PC mode, you can only make changes to
“Dynamic Contrast”, “Gamma” and “White Balance” from
among the “Detailed Settings” items.
English - 17
BN68-01507K-Eng_0312.indd 17
TV
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move Enter

7
95
45
50
50
50



Return
Detailed Settings
TV
Black Adjust
: Off
Dynamic Contrast
: Medium
Gamma
: 0
Colour Space
: Native
White Balance
Flesh Tone
: 0
Edge Enhancement : On
Move Enter







Return
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of red, green and blue colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
♦ Native: Native Color Space offers deep and rich color tone.
♦ Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button.
Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the ENTER
button.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Reset: Resets the colour space to the default values.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
♦ Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1.To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 16.
2.Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
The "Reset" will be set for each Picture mode.
English - 18
BN68-01507K-Eng_0312.indd 18
TV
Picture
Mode
: Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50
R 50
Detailed Settings
Picture Options
Reset
: OK
OK
Cancel
Move Enter
Return
Changing the Picture Options
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2.Press the ▲ or ▼ button to select “Picture Options”, then
press the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
4. When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
➣ In PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture
Options”.
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣ The adjusted values are stored according to the selected
Picture mode.
➣
TV
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move TV
Enter

7
95
45
50
50
50



Return
Picture Options
Colour Tone Size Digital NR DNle HDMI Black Level Blue Only Mode Move : Normal
: 16:9
: Auto
: Off
: Normal
: Off
Enter






Return
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
♦ Size: 16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)
or Component (1080i) signals are input.
➣
➣
➣
➣
➣
➣
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENTER button.
Zoom: Select
by pressing the ◄ or ►button.
Use the ▲ or ▼ button to move the picture up and down. After selecting
,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
When Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
OY
ou can select these options by simply pressing the P.SIZE
button on the remote control.
English - 19
&2/)RKCMRHH
♦ Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
♦ DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.
“DNIe” is only available in “Dynamic” mode.
♦ HDMI Black Level: Normal/Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
English - 20
BN68-01507K-Eng_0312.indd 20
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "PIP", then press the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER
button.
4. When you are satisfied with your setting, press the
ENTER
button.
5. Press the EXIT button to exit.
➣ You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a
game or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the
ENTER
button.
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
5. Press the EXIT or TOOLS button to exit.
TV
Main picture
Component 1, 2
HDMI 1, 2, 3
PC
Sub picture
TV, AV1, AV2
TV, AV1, AV2
TV, AV1, AV2
♦ Source
You can select a source of the sub-picture.
Move PIP
Move 




Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
Move : Standard
: Custom
: Off
: Off
: Off
Enter
Exit
PIP
PIP
 On
Source : TV
Size : Position : Programme : P1
Move ♦ Position:
/
/
/
You can select a position of the sub-picture.
➣ In Double ( , ) mode, "Position" cannot be selected.
♦ Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV".
BN68-01507K-Eng_0312.indd 21
Return
: On
: TV
: : : P1
♦ Size:
/
/
You can select a size of the sub-picture.
➣ If main picture is in "HDMI" mode, "Size" is available.
English - 21







Enter
PIP
Source
Size
Position
Programme
♦ PIP: On/Off
You can activate or deactivate the PIP function.
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Adjust

Return
Sound Features
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER button.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
TV Speaker
: On
Sound Select : Main
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.






3.When you are satisfied with your setting, press the ENTER
button.
4.Press the EXIT button to exit.
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode
◄ Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
➣ If you make any changes to these settings, the sound
mode is automatically switched to "Custom".
Move Move Adjust
►
Exit
Equalizer
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust
Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
O Press the SRS button on the remote control to select "Off"
or "On".
Easy Setting
Tools
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "SRS TS XT".
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT
◄ Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
►
Exit
TruSurround XT, SRS and
Symbol are trademarks of SRS Labs,
Inc.TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English - 22
BN68-01507K-Eng_0312.indd 22
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣ The
+,
- and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
➣ When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
1.
2.
3.
4.
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select “Dual I-II".
Press the ◄ or ► button to select required option.
Press the ENTER button.
A2
Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll
◄ Mono
Move Adjust
►
Exit
DUAL 1
If the stereo signal is weak and an automatic switching occurs,
then switch to the Mono.
This function is only activated in stereo sound signal. It is
deactivated in mono sound signal.
This function is only available in TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
TV Side Panel
watch a TV programme without disturbing the other people in the
room.
➣ When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
➣ Prolonged use of headphones at a high volume may damage your
hearing.
➣ You will not receive sound from the speakers when you connect headphones to the system.
➣ The headphone volume and TV volume are adjusted differently.
English - 23
BN68-01507K-Eng_0312.indd 23
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ENTER
4.
button to select "Clock Set".
To...
Move to "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Set the "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Confirm the setting
Enter
Return
Clock Set
TV
Press the...
Month
Day
Year
01
01
2008
Hour
Minute
am/pm
12
00
am
p
◄ or ► button.
q
▲ or ▼ button.
ENTER
Move 






button.
5. Press the EXIT button to exit.
Move Adjust
Return
If you disconnect the power cord, you have to set the clock again.
Y
ou can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on
the remote control.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Sleep Timer”.
3.Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
BN68-01507K-Eng_0312.indd 24
Move 






Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 12 : 00 am
:
Off
:
30
:
60
:
90
120
150
180
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer
◄ Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
English - 24
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Adjust
Exit
►
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Setup
TV
Press the ▲ or ▼ button to select "Setup", then press the Plug & Play

Language
: English

ENTER button.
Time

Melody
: Off

Entertainment
:
Off

2. Press the ▲ or ▼ button to select "Time", then press the Energy Saving
: Off

PIP

ENTER button.
3.Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
Three different On/Off Timer Settings can be made.
Move Enter
Return
➣ You must set the clock first.
Timer 1
TV
4.Press the ◄ or ► button to select the required item below.
On Time
Press the ▲ or ▼ button to adjust to the setting satisfied.
5 00 :
00
am
Off
6
Off Time
♦O
n Time: Select hour, minute, am/pm and "On"/"Off". (To
00
am
Off
00 :
activate timer with the setting satisfied, set to
Repeat
"On".)
Once
Volume
Programme
♦O
ff Time: Select hour, minute, am/pm and "On"/"Off". (To
10
01
activate timer with the setting satisfied, set to
► Move Adjust
Return
"On".)
♦R
epeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", or "Sat~Sun".
♦ Volume: Select the desired turn on volume level.
♦ Programme: When the On Timer is active, you can turn on a specific channel.
You can set the hour, minute and Programme directly by pressing the number buttons on the remote
control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
English - 25
BN68-01507K-Eng_0312.indd 25
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Enter







Return
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP







3.When you are satisfied with your setting, press the
ENTER button.
4.Press the EXIT button to exit.
Move Enter
Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➣
The Melody does not play
- When no sound is output from the TV because the MUTE button has been pressed
- When no sound is output from the TV because the (Volume) button has been pressed
- When the TV is turned off by Sleep Timer function.
♦ Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
- Off: Switch the "Entertainment" function off.
- Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
Colour and sound.
- Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
- Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➣
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not
be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment”
mode must be turned off.
➣
➣
The “Entertainment” settings are saved for each input source.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.
OY
ou can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - 26
BN68-01507K-Eng_0312.indd 26
♦Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off", "Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
This function is not available in “PC” mode.(40 inch)
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving
◄ Off
Dual l-ll : Mono
Move Adjust
►
Exit
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2. Press the ENTER button again, to select "Source List".
Available signal sources: TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1, HDMI2, HDMI3.
You can choose only those external devices that are
connected to the TV.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
Input
Source List
:TV 
Edit Name 
Anynet+(HDMI-CEC) 
TV
OYou can also watch HDMI mode simply by pressing the HDMI
button on the remote control.
English - 27
BN68-01507K-Eng_0312.indd 27
Enter
Return
Source List
TV
AV1
: ---AV2
: ---S-Video
: ---Component1
: ---Component2
: ---PC
: ---HDMI1
: ---HDMI2
: ---HDMI3
: ----
OPress the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the TV button, number
buttons(0~9), and the P / button on the remote control.
Move Move Enter
Return
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
TV
Input
Source List
:TV 
Edit Name 
Anynet+(HDMI-CEC) 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2.Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
3.
4.
Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER button.
Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
TV
BN68-01507K-Eng_0312.indd 28
Enter
Return
Edit Name
AV1
AV2
S-Video
Component1
Component2
PC
HDMI1
HDMI2
HDMI3
English - 28
Move Move : ------: ---VCR
: ---DVD
: ---- Cable STB
: ----Satellite STB
: ---- PVR STB
: ----AV Receiver
: ---- Game
q
: ----
Enter
Return
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display
dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
D-Sub Input
Mode
IBM
VESA
Resolution
640x350
720×400
640×480
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1360 x 768
Horizontal
Frequency (kHz)
31.469
31.469
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
Vertical
Frequency (Hz)
70.086
70.087
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
Pixel Clock
Frequency (MHz)
25.175
28.322
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
Sync Polarity
(H/V)
+/-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
Horizontal
Frequency (kHz)
31.469
37.879
48.363
47.712
Vertical
Frequency (Hz)
59.940
60.317
60.004
60.015
Pixel Clock
Frequency (MHz)
25.175
40.000
65.000
85.500
Sync Polarity
(H/V)
-/+/+
-/+/+
HDMI/DVI Input
➣
➣
➣
➣
Mode
Resolution
VESA
640×480
800×600
1024×768
1360 x 768
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 29
&2/)RKCMRHH
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
1.Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
3.When you are satisfied with your setting, press the
ENTER button.
4. Press the EXIT button to exit.
TV
♦ Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENTER button.
Move Enter

7
95
45
50





Return
Auto Adjustment in Progress
Please wait.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
Auto Adjustment
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Auto Adjustment
Screen Adjustment Detailed Settings
Picture Options
Reset
: OK
Move TV
: Standard
: Custom
: Off
: Off
: Off
Enter
Exit
Screen Adjustment
Coarse
50
Fine34
Position

Image Reset

Move TV
Enter
Return
Position
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Image Reset
You can replace all image settings with the factory default
values.
English - 30
BN68-01507K-Eng_0312.indd 30
TV
Move Enter
Return
Screen Adjustment
Coarse
50
Fine34
Position

Image Reset

Move Enter
Return
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
TV
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
HDMI Cable
HDMI Cable
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT jack
of the corresponding Anynet+
device using the HDMI cable.
HDMI Cable
To connect to Home Theater
TV
Anynet+ Device 1
HDMI Cable
Home Theatre
HDMI Cable
➣
➣
➣
➣
Anynet+ Device 2
HDMI Cable
Anynet+ Device 3
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theatre and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
HDMI Cable
Connect only one receiver.
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 31
BN68-01507K-Eng_0312.indd 31
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The TOOLS button. Then Press the ENTER button
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",
then press the ENTER button.
3. Press the ▲ or ▼ button to select "On", then press the
ENTER button.
➣ The "Anynet+ (HDMI-CEC)" function is enabled.
➣ If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣ When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual l-ll
Move TV
: Standard
: Custom
: Off
: Off
: Off
: Mono
Enter
Exit
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: Off
Off
Auto Turn Off : Off
On
Searching Connections
Move Enter
Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the ENTER button.
2. Press the ▲ or ▼ button to select "Yes", then press the
ENTER button.
➣ The "Auto turn off" function is enabled.
➣ If you select "Yes", the "Auto turn off" function is cancelled.
Press the EXIT button to exit.
➣ The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
➣ If you set "Auto Turn Off" to "Yes", connected external devices
are also turned off when the TV is turned off. However, if the
device is recording, it may not be turned off.
English - 32
BN68-01507K-Eng_0312.indd 32
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Searching Connections
Move Enter
No
Yes
Return
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button. Then press the ENTER button to
TV
P9
select "Anynet+(HDMI-CEC)".
View TV
2. Press the ▲ or ▼ button to select "Select Device", then press
Select Device

the ENTER button.
Record

3. Press the ▲ or ▼ button to select to a particular device and
Menu on Device

press the ENTER button. It is switched to the selected
Device Operation

device.
Receiver :Off

4. If you cannot find a device you want, press the ▲ or ▼ button
Setup

to select "Setup", then press the ENTER button.
Move Move
EnterEnterReturn
5. Press the ▲ or ▼ button to select "Searching Connections",
Return
then press the ENTER button.
Setup
The message "Configuring Anynet+ connection..." is
displayed. When searching devices completes, the connected
Anynet+ (HDMI-CEC)
: On

devices are listed in the Anynet+ menu.
Auto Turn Off : Yes

➣ Switching to the selected devices may take up to 2 minutes.
Searching Connections 
You cannot cancel the operation during the switching
operation.
Move Enter
Return
➣ The time required to scan for devices is determined by the
number of connected devices.
➣ When the device scan is complete, the number of found devices is not displayed.
➣ Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select "Searching Connections" menu to search devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
English - 33
BN68-01507K-Eng_0312.indd 33
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER buttons
Colour buttons EXIT button
(Backward search)/
(Forward search)/
(Stop)/
(Play)
(Pause)
Device with built-in Tuner
After switching to the device,
when you are watching a TV
programme
P</>button
Audio Device
When Receiver is activated
+/- button/
MUTE button
➣
➣
➣
➣
➣
➣
➣
The Anynet+ function only works when the remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices
only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the colour buttons may not work properly.
The
,
operations may differ depending on the device.
English - 34
BN68-01507K-Eng_0312.indd 34
Recording
You can make a recording of a TV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣ The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣ You can also record the source streams by selecting "Record" after pressing the TOOLS button.
➣ Before recording, check whether the antenna jack is properly connected to the recording device. For
the antenna connection to the recording device, refer to its user manual.
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press The TOOLS button. Then Press the ENTER button
to select "Anynet+(HDMI-CEC)".
TV
P9
Press the ▲ or ▼ button to select "Receiver", then press the
View TV
ENTER button.
Select Device

Record

2. Press the ◄ or ► button to select to "On", then press the
Menu on Device

ENTER button.
Device Operation

Now you can listen to sound through the receiver.
Receiver :Off

3. Press the EXIT button to exit.
Setup

➣ When the receiver is set to On, you can listen to the TV sound
Move Enter
through the 2-channel receiver.
Return
➣ If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣ In case of a content with copyright problem, listening through the receiver may not properly operate.
➣ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 23)
English - 35
BN68-01507K-Eng_0312.indd 35
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
Solution
■
■
■
■
■
■
■
■
■
I want to start
Anynet+.
■
■
■
I want to exit Anynet+. ■
■
■
The Connecting to
Anynet+ device…
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV programme
cannot be recorded.
■
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play,
etc.)
When connecting or removing the HDMI cable, please make sure to search
devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the
TOOLS button to show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
Press any of P / , and PRE-CH to change to the TV mode.
(Note that the channel button operates only when a tuner-embedded Anynet+
device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI
cables may not support Anynet+ functions.
■If it is terminated by an abnormal situation such as disconnecting the HDMI cable
or power cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
English - 36
BN68-01507K-Eng_0312.indd 36
Teletext Feature
Most television stations provide written information services via Teletext. The index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1. (exit)
Exit from the teletext display
26 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
1
7
38 (store)
Used to store the teletext pages.
44 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
8
55 (reveal)
9
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
0
6/ (teletext on/mix)
2
3
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
4
!
with the current broadcasting screen.
70 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
5
@
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
#
8(store) button.
6
81 (sub-page)
Used to display the available sub-page.
92 (page up)
Used to display the next teletext page.
03 (page down)
Used to display the previous teletext page.
!9 (hold)
Used to hold the display on a given page if the selected page is linked with several secondary
pages which follow on automatically. To resume, press it again.
@7 (cancel)
Used to display the broadcast when searching for a page.
#Coloure buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a
teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed with other coloured information that
can be selected in the same way. To display the previous or next page, press the corresponding
coloured button.
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - 37
BN68-01507K-Eng_0312.indd 37
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
♦ Entering the page number
♦ Selecting a title in a list
♦ Selecting a coloured heading (FASTEXT system)
Press the TV button to exit from the teletext display.
English - 38
BN68-01507K-Eng_0312.indd 38
Wall-Mount Adjustment (Sold separately) (LA32A350, LA37A350, LA40A350)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣ The Wall Mount Adjustment screen is displayed.
➣ If the Wall Mount Adjustment screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
• Press the ▲ or ▼ button to select “Wall-Mount
Adjustment”, then press the ENTER button.
Setup
TV
Plug & Play
Language
: English
Time
Wall-Mount Adjustment
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move 







Enter
Return
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣ If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣ Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENTER button.
The position is initialized to the default setting.
3. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣ To not save the current position, press the RETURN button.
➣ When selecting a save mode, you cannot use the Colour
buttons.
4. Press the ENTER button to save.
➣ When Position1 is selected, the message "Current position
saved as Position1" is displayed.
5. Press the ENTER button.
➣ The saved Position appears on the left side of the OSD.
English - 39
&2/)RKCMRHH
Wall-Mount Adjusment
Position 1 2 3
Adjust Save
i
Centre
Save
Select a mode to Save.
Position1
Position2
Position3
Adjust Enter
Return
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
Wall-Mount Adjusment
2. Pressing a Colour (Red, Green, Yellow) button moves the auto
wall mount to the saved position.
➣ You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1),
Green (Position 2) or Yellow (Position 3) buttons.
➣ If you adjust the Position after moving to a pre-set position,
the position display will disappear.
➣
➣
➣
➣
➣
Position1
Position 1 2 3
Adjust Save
i
Centre
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to
other building materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ is operating.
37 and 40 inch models are not compatible with the old electrically powered wall mount model
(WMN5090A*).
Using the Anti-Theft Kensington Lock (depending on the model)
The Kensington lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington lock for proper use. The locking device has to be
purchased separately.
1.Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
2. Connect the Kensington Lock cable.
3.Fix the Kensington Lock to a desk or a heavy
stationary object.
➣ The location of the Kensington Lock may be
different depending on its model.
Cable
Figure 2
Figure 1
<Optional>
English - 40
BN68-01507K-Eng_0312.indd 40
Troubleshooting: Before Contacting Service Personnel
No sound or picture.
 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the
button on your set.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no
 Check the volume.
sound.
 Check whether the MUTE button has been pressed on the remote control.
 Check if "TV Speaker" is on.
Screen is black and power
 On your computer check; Power, Signal Cable.
indicator light blinks steadily.  The TV is using its power management system.
 Move the computer’s mouse or press any key on the keyboard.
No picture or black and
 Adjust the colour settings.
white picture.
 Check that the broadcast system selected is correct.
Sound and picture
interference.
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
 Check the direction, location and connections of your aerial.
distorted sound.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions.  Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the battery terminals.
'Check signal cable.'
 Check that the signal cable is firmly connected to the PC or video sources.
message is displayed.
 Check that the PC or video sources are turned on.
On PC mode, 'Not Supported  Check the maximum resolution and the frequency of the video adaptor.
Mode.' message is displayed.  Compare these values with the data in the Display Modes.
The damaged picture appears If "Just Scan" is selected in some external devices, the damaged picture
in the corner of the screen.
may appear in the corner of the screen. This symptom is caused by external
devices, not TV.
The 'Resets all settings to
This appears when you press and hold the EXIT button for a while.
the default values' message
The product settings are reset to the factory defaults.
appears.
The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - 41
BN68-01507K-Eng_0312.indd 41
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
LA26A350
26 inch
1360 X 768 @ 60 Hz
LA32A350
32 inch
1360 X 768 @ 60 Hz
5W x 2
10W x 2
670 X 75 X 446 mm
670 X 216 X 500 mm
800 X 79 X 522 mm
800 X 252 X 577 mm
10 kg
13 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
0˚
-20˚ ~ 20˚
LA37A350
37 inch
1360 X 768 @ 60 Hz
LA40A350
40 inch
1360 X 768 @ 60 Hz
10W x 2
10W x 2
916 X 82 X 598 mm
916 X 300 X 658 mm
990 X 82 X 636 mm
990 X 300 X 694 mm
18 kg
19 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
-20˚ ~ 20˚
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 42
BN68-01507K-Eng_0312.indd 42
This page is intentionally
left blank.
BN68-01507K-Eng_0312.indd 43
This page is intentionally
left blank.
BN68-01507K-Eng_0310.indd 43
使用说明书
请在 www.samsung.com/global/register 注册您的产品
在此处记下型号和序列号,以供今后参考之用。
型号
BN68-01507K-00SC_0312.indd 100
序列号
三星全球服务网
如果您对三星产品有任何咨询或建议, 请联系三星客服中心。
 显示静止图像时的注意事项
静止图像可能会导致电视屏幕永久性损坏。
 不要在 LCD 平板上显示静止图像超过 2 小时,因为这会导致出现屏幕图像残影。
此图像残影也称为 screen burn(荧光屏灼伤)。
要避免此类图像残影,请在显示静止图像时降低屏幕的亮度和对比度。
 长时间观看 4:3 格式的液晶电视节目时,在屏幕的左侧、右侧和中央显示的边缘会由于
屏幕上光发射的不同而留下痕迹。播放 DVD 或连接游戏控制台也会对屏幕产生类似的
影响。上述原因导致的损坏不在保修范围之内。
 显示电子游戏和 PC 的静止图像的时间超过某段时间后可能会导致局部余像。为避免出现此效果,请在
显示静止图像时降低 brightness(亮度)和 contrast(对比度)。
©2008 三星电子有限公司保留所有权利。
BN68-01507K-00SC_0312.indd 101
中文
目录
其他设置
电视机的连接和准备












部件清单............................... 2
安装支架............................... 2
安装墙托架套件......................... 2
查看控制面板........................... 3
查看连接面板........................... 4
查看遥控器............................. 7
安装遥控器电池......................... 8
开机和关机............................. 8
将电视机置于待机模式................... 8
查看菜单............................... 9
使用工具按钮........................... 9
即插即用............................... 10
设置频道






自动选台............................... 11
手动选台............................... 12
添加/锁定频道.......................... 13
变更已储存频道的台号................... 14
指定频道名称........................... 14
频道接收微调........................... 15




设置个人电脑
置您的 PC(个人电脑)软件(以 Windows XP
设
为例).................................. 29
 显示模式............................... 29
 设置个人电脑........................... 30
关于 Anynet+







什么是 Anynet+?....................... 31
连接 Anynet+ 设备...................... 31
设置 Anynet+ .......................... 32
在 Anynet+ 设备之间浏览和切换.......... 33
录制................................... 35
通过接收器收听......................... 35
请求维修之前检查以下情况............... 36
使用建议
设置图像






选择您的语言........................... 25
开关机旋律/娱乐/省电................... 26
选择节目源............................. 27
编辑输入源名称......................... 28
更改图像标准........................... 16
调整个人设定图像....................... 17
为图像配置详细设置..................... 17
将图像设置重置为出厂默认值............. 18
图像选项............................... 19
观看画中画 (PIP)....................... 21
 图文电视功能(视型号而定)............... 37
托架调整(单独出售)
墙
(LA32A350,LA37A350,L40A350)............ 39
 使用 Kensington 防盗锁................. 40
 故障诊断:与维修人员联系之前............ 41
 技术和环境规范......................... 42
设置伴音
 伴音功能............................... 22
 选择伴音模式........................... 23
 连接耳机(单独出售)..................... 23
设置时间
 设置和显示当前时间..................... 24
 设置关机提示........................... 24
 自动打开和关闭电视机................... 25
符号
按下
重要事项
注意事项
单触式按钮
中文-
BN68-01507K-00SC_0312.indd 1
部件清单
请确保随液晶电视机一起提供了下列部件。
如果缺少任何一项,请与您的经销商联系。
M4 X L16
遥控器和电池
(AAA x 2)
电源线
使用说明书
➣
➣
下盖
底座螺钉(4 个)
保修卡
支架
安全指南
清洁布
注册卡
保修卡/维修网络卡/安全指南/注册卡(国家不同,电视配件也有所不同)
视产品型号而定,可能不会随附支架和支架螺钉。
安装支架
2
1
1.
连接液晶电视和支架。
➣ 应至少由两人搬动电视
➣ 组装时,请确保分清支架的前后方向
2. 拧紧 1 处的两颗螺钉,再拧紧 2 处的两颗螺钉。
➣ 使产品竖立并拧紧螺钉。如果在液晶电视平放时拧紧螺钉,可能导致电视向一边倾斜。
➣ 安装的支架适用于屏幕尺寸为 37 英寸或以上的型号。
安装墙托架套件
视产品型号而定,可能不会随附支架和支架螺钉。墙托架套
件(单独销售)让您可以将电视机安装在 墙壁上。有关进行
墙托架套件的详细信息,请参阅随墙托架套件提供的说明。
安装墙托架时请与技术人员联系,请求其协助。如果您选择
自行安装电视机,并因此对产品造成任何损害或对您本人或
他人造成任何人身伤害,三星电子概不承担任何责任。
请勿在 TV 启动状态下安装墙托架套件。否则可能
会引发触电造成人身伤害。
➣
卸下支架,并用座盖盖住底部的孔并用螺钉固定。
中文-
BN68-01507K-00SC_0312.indd 2
查看控制面板
➢ 产品颜色和外形可能随型号的不同而异。
1 SOURCE(节目源)
在所有可用输入节目源(TV、AV1、AV2、
S-Video、Component1、Component2、
PC、HDMI1、HDMI2 和 HDMI3)之间切
换。屏幕菜单中此按钮的功能与遥控器上
按钮的功能相同。
2 MENU(项目)
按此按钮可查看电视机功能的屏幕菜单。
3 - VOL +
按这两个按钮可提高或降低音量。
屏幕菜单中 - VOL + 按钮的功能与遥控器
上  或  按钮的功能相同。
4
5
6 Remote Control Sensor(遥控传感器)
将遥控器对准电视机上的这一位置。
7 Power Indicator(电源指示灯)
在打开电源时不停闪烁,然后熄灭,处于
待机模式时则亮起。
8 Speakers(扬声器)
CH
按此按钮更改频道。屏幕菜单中 CH
按钮的功能与遥控器上  或  按钮的
功能相同。(不使用遥控器,您也可以用频
道按钮打开电视机。)
中文-
BN68-01507K-00SC_0312.indd 3
(电源)
按此按钮可打开和关闭电视机。
查看连接面板
LA40A350
[后面板]
1
2
3
4 5
[侧面板插孔]
6
3
AV IN 2
7
8
电源输入
0
9
LA26A350, LA32A350, LA37A350
[后面板]
4
3
5 2
[侧面板插孔]
3
AV IN 2
1
7
8
6
0
9
电源输入
➢ 产品颜色和外形可能随型号的不同而异。
➣
➣
每当将外部设备与电视机连接时,请确保已将电视机的电源关闭。
连接外部设备时,请将电缆和与之颜色相同的连接端子相连。
中文-
BN68-01507K-00SC_0312.indd 4
AV IN 2
1 PC IN(输入) [PC] / [AUDIO](音频)
- 将 D-Sub 电缆连接到电视机背面的 PC(PC IN),音频电缆连接到电视机背面的音频
(PC IN)。
2� 连接外部 A/V(视听)设备(AV IN1)
- 将 RCA(可选)或 S-VIDEO 电缆(可选)连接到适当的外部 A/V(视听) 设备
(如录像机、DVD或摄像机)。
- 将 RCA音频电缆(可选)连接到电视机背面的"R-AUDOI-L",并将另一端连接到 A/V
(视听)设备上对应的音频输出连接器。
3� 连接 HDMI IN 1、HDMI IN 2、HDMI IN 3
- 支持与启用 HDMI 连接的 AV 设备(机顶盒、DVD 播放机、AV 接收器和数字电视)
之间进行连接。
- HDMI 到 HDMI 的连接无需伴音连接。
- 使用 HDMI/DVI 电缆连接时,必须使用 HDMI 输入2 插孔。
➣ 什么是 HDMI?
- HDMI(又称高清晰多媒体接口)是下一代接口,使用一根电缆便可传输数字音频和视频信
号,无需压缩。
- 由于它支持多声道数字音频(5.1 声道),多媒体接口一词对于它名符其实。HDMI 与
DVI 之间的差别在于: HDMI 设备尺寸较小,安装有 HDCP(高带宽数字内容保护)
功能,同时支持多声道数字音频。
DVI IN (HDMI 2) [R-AUDIO-L]
- 用于外部设备的 DVI 音频输出。
➣ HDMI/DVI 或 分量输入的支持模式。
HDMI/DVI 50Hz
HDMI/DVI 60Hz
分量输入
480i
480p
576i
576p
720p
1080i
1080p
x
x
o
x
o
o
x
x
o
o
x
o
o
o
o
o
o
o
o
o
o
4 AUDIO OUT[R-AUDIO-L](连接音频)
将 RCA 音频电缆连接到电视机背面的(AUDIO OUT[R-AUDIO-L]),并将另一端连接到功
率放大器或 DVD 家庭影院连接器上对应的音频。
5 ANT IN(连接天线或有线电视网)
电视机必须从以下信号源之一收到信号,才能正确显示电视频道:
- 户外天线/有线电视网/卫星网络
6 SERVICE(维修使用)
- LA26A350
仅用于维修的连接器。
- LA32A350,LA37A350,LA40A350
将该接口连接至可选壁挂架的插孔。此功能使您能够使用遥控器来调整电视观看角度。
中文-
BN68-01507K-00SC_0312.indd 5
7 S-VIDEO或VIDEO/[R-AUDIO-L]
- 将 RCA(可选)或 S-VIDEO 电缆(可选)连接到适当的外部 A/V(视听)设备(如录像机、DVD
或摄像机)。
- 将RCA音频电缆(可选)连接到电视机背面的 "R-AUDIO-L",并将另一端连接到
A/V(视听)设备上对应的音频输出连接器。
8 耳机插孔
- 可以将耳机连接到电视机耳机输出端。连接耳机后,内置喇叭就不会发出伴音了。
9 Kensington锁(视型号而定)
- Kensington 锁(可选)是一种在公共场合固定电视设备的工具。
- 如果要使用锁定装置,请与销售电视机的经销商联系。
- Kensington 锁的位置可能随其型号而有所不同。
10 COMPONENT IN(连接分量设备)
- 将
分量视频电缆(可选)连接到电视机背面的分量连接器("PR"、"PB"、"Y"),并将另一端
连接到DTV或DVD的对应分量视频输出连接器。
- 如果您希望同时连接机顶盒和 DTV(或 DVD),应将机顶盒连接到DTV(或 DVD),并
将 DTV(或 DVD)连接到电视机的分量连接器("PR"、"PB"、"Y")。
- 分量设备(DTV 或 DVD)背面的 "PR"、"PB" 和 "Y" 连接器有时也标为 Y、B-Y 和
R-Y 或 Y、Cb 和 Cr。
- 将RCA音频电缆(可选)连接到电视机背面的[R-AUDIO-L],并将另一端连接到DTV或
DVD 上对应的音频输出连接器。
中文-
BN68-01507K-00SC_0312.indd 6
查看遥控器
1 开机/待机按钮
2 直接选择TV(电视)模式
3 用于直接选取频道的数
字按钮
4 一位/两位数频道选择
5 音量提高
音量减低
6 暂时关闭伴音
7 在屏幕上显示"Channel
List"(频道列表)
22 通过HDMI接口连接了
SAMSUNG DMA(数字媒
体适配器)设备时,请
使用此按钮切换到DMA
模式。(DMA 按钮为可
选按钮。)有关操作程
序的更多信息,请参阅
DMA 用户手册。
当"Anynet+(HDMI-CEC)"
设置为"On(开)"时,此
按钮可用。(参见第 32
页)
8 快速选择常用功能。
23 选择图像尺寸
9 用于查看当前广播节目
24 直接选择HDMI模式
的信息
10 彩色按钮:调整壁挂功
25 图像效果选择
能或图文电视时使用
12 选择其他显示和声音模
式以观赏体育节目、电
影或玩游戏。
13 在DMA和Anynet+中使
用这些按钮。
(
: 此遥控器可用于
控制具有Anynet+功能
的三星录像机进行录
像。)
14 可用节目源选择
15 显示上一个观看的频道
16 下一频道
上一频道
17 显示屏幕主菜单
18 选择SRS TruSurround
XT 模式
图文电视功能
2 退出图文电视显示
7 图文电视存储
8 图文电视尺寸
9 图文电视显示
10 Fastext主题选择
11 选择图文电视、
Double(双重)、或Mix
(混合)。
14 图文电视模式选择
(LIST(列表)/FLOF)。
15 图文电视子页面。
16 P
P
图文电视下一页
图文电视上一页
17 图文电视索引
19 返回到上一菜单
19 图文电视保持
20 控制菜单中的光标
21 图文电视取消
21 退出屏幕菜单
➣
遥控器的性能可能会受到明亮光线的影响。
中文-
BN68-01507K-00SC_0312.indd 7
SRS
TOOLS
安装遥控器电池
1.如图所示, 向上抬起遥控器后盖。
2.安装两节 AAA 规格的电池。
➣ 确保电池的正极 "+"和负极 "-"如电池盒内的示意图所示。
3.装回后盖。
➣ 如果长时间不用遥控器,请取出电池并将电池放在凉爽干燥的地方
保存。
 如果遥控器不工作,请进行下列检查:
1.是否打开了电视机?
2.电池的正极和负极是否倒转?
3.电池电量是否耗尽?
4.电视是否断电或者未插入电源线?
5.附近是否有特殊的荧光或氖光信号?
开机和关机
电源线与电视机背面连接。
1.将电源线插入适当的插孔。
➣ 电视机前面板上的待机指示灯亮起。
2.按下侧面板上的电源 按钮。
➣ 还可按遥控器上的POWER(电源) 按钮打开TV(电视)。
➣ 自动选择上次观看的电视台。
3.按下遥控器上的数字按钮(0~9)或上一频道/下一频道按钮 P( / ),或者按下电视机
CH
右侧的
按钮。
4.要关闭电视,再次按下POWER(电源) 按钮即可。
➣ 如果您长时间不观看电视节目,请将电视机电源插头拔下,以节约能源。
因为电视机处于待机状态下也会消耗能源。
将电视机置于待机模式
为减少功耗,可将您的电视机置于待机模式。您想暂时中断观看(如吃饭)时,待机模式就
很有用。
1.按遥控器上的POWER(电源) 按钮。
➣ 屏幕关闭,电视机前端亮红色待机指示灯。
2.要重新打开电视,只需再按POWER(电源) 、数字按钮(0~9)、TV按钮或下一频道/上一
频道按钮 P( / )即可。
➣ 切勿长时间将电视机置于待机模式(如您外出度假)。
最好拔下电视机的电源和天线。
中文-
BN68-01507K-00SC_0312.indd 8
查看菜单
TV
1.按下MENU按钮显示菜单。
在屏幕上显示主菜单。
其左侧有五个图标: Picture(图像)、Sound(伴音)、
Channel(频道)、Setup(设置)和Input(输入)。
2.按 ▲ 或 ▼ 按钮选择其中一个图标。
按 按钮访问图标的子菜单。
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
3.按EXIT按钮退出。
➣
Move Enter
Return
大约一分钟后,屏幕菜单将会从屏幕上消失。
使用工具按钮
按TOOLS(工具)按钮可快速选择常用的功能。
工具菜单的功能将根据您正在使用的外部输入模式而产生
变化。
1.下TOOLS(项目)按钮。
显示"Tools"(工具)菜单。
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual l-ll
: Standard
: Custom
: Off
: Off
: Off
: Mono
2.按 ▲ 或 ▼ 按钮选择所需选项。
3.按 ▲/▼/◄/►/ 按钮以显示、更改或使用选择的项
有关各功能的详细说明,请参阅各相关页面。









Anynet+(HDMI-CEC)(请参阅第32页)
Picture Mode(图像模式)(请参阅第16页)
Sound Mode(声音模式)(请参阅第22页)
Sleep Timer(睡眠定时器)(请参阅第24页)
SRS TS XT(请参阅第22页)
Energy Saving(省电)(请参阅第27页)
Dual I-II(请参阅第23页)
PIP(画中画)(请参阅第21页)
Auto Adjustment(自动调整)(请参阅第30页)
中文-
&2/7'CMRHH
Move Enter

7
95
45
50
50
50



Exit
即插即用
电视机第一次开启时,会先后自动出现几个基本设定。
可以进行以下设置。
➢ 当“即插即用”运行时,如果超过 1 分钟没有遥控
键输入,屏幕保护程序将被激活。
➢ 如果超过 15 分钟没有操作信号,屏幕保护程序将被
激活。
1.按遥控器上的POWER(电源) 按钮。
屏幕上出现"Start Plug & Play"(开始即插即用)消息,
OK已选定。
2.按 ▲ 或 ▼ 按钮选择合适的语言。按 按钮确认您的选择。
Plug & Play
Start Plug & Play.
OK
Enter
3.按  或  按钮选择"Store Demo(商店)"或"Home Use(家用)",然后按 按钮。
屏幕显示检查天线连接状态的消息。
➣ 我们建议将电视机设置为家庭模式,以便在家庭环境中获得最佳效果。
➣ "Store Demo(商店)"模式仅适用于零售环境。
➣ 如果电视机意外设置为"Store Demo(商店演示)"模式,而您想返回到"Home Use(家用)"
模式,请按声音按钮,然后按住电视机 面板上的项目按钮,持续 5 秒钟。
4.选择确定后显示消息"Check antenna input.(检查天线输入。)"
按下 按钮。
➣ 请检查天线电缆的连接是否正确。
5.按 ▲ 或 ▼ 按钮选择合适的地区。
按 按钮确认您的选择。
6.屏幕上显示"Auto Store(自动选台)"菜单,其中"Start(开始)"已被选中。
按下 按钮。
➣ 频道搜索将自动开始并结束。
➣ 存储所有可用的频道后,将出现"Clock Set(时钟设置)"菜单。
➣ 可随时按 按钮来中断记忆过程。
7.按下 按钮。
按  或  按钮可选择"Month(月)"、"Day(日期)"、"Year(年)"、"Hour(小时)"、
"Minute(分钟)"或"am/pm"。
按 ▲ 或 ▼ 按钮进行设置。"Month(月)"、"Day(日期)"、"Year(年)"、"Hour(小时)"、
"Minute(分钟)"或"am/pm"。
➣ 您还可以通过按遥控器上的数字按钮来设置小时和分钟。
8.按确认 按钮确定设置。屏幕将显示信息"Enjoy your viewing(欣赏节目)"。按下 按钮。
➣ 即使没有按下 按钮,该消息也会在几秒钟后自动消失。
♦ Language(语言): 选择语言。
♦ Area(地区): 选择地区。
♦ Auto Store(自动选台): 自动扫描并存储当地可以收看的频道。
♦ Clock Set (时钟设置): 设置电视机时钟的当前时间。
中文-10
BN68-01507K-00SC_0312.indd 10
如果您想重设该功能...
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按
2.再次按
TV
按钮。
按钮,选择"Plug & Play(即插即用)"。
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP







3.屏幕上显示消息Start Plug & Play(开始即插即用)。
➣
仅在电视模式下,"Plug&Play(即插即用)"功能才可用。
Move Enter
Return
自动选台
您可以扫描所有频道(范围大小视您所在国家或地区而
定)。
自动分配的台号,可能与实际台号或想要的台号不对应。
不过,您可以手动变更台号,清除不想看的频道。
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)",
然后按 按钮。
2.按
按钮选择"Area(地区)"。
3.按 ▲ 或 ▼ 按钮选择合适的地区。
按
按钮确认您的选择。
4.按 ▲ 或 ▼ 按钮选择"Auto Store(自动选台)", 然后按
按钮。
5.按下 按钮。
➣ 电视机将开始记忆所有可收看的频道。
➣ 可随时按下 按钮中断记忆过程并返回"Channel(频道)"菜单。
6.存储所有可收看的频道后,将出现"Sort(变更台号)"菜单。
中文-11
BN68-01507K-00SC_0312.indd 11
Move Enter







Return
手动选台
您可以存储电视频道,包括通过有线电视网接收的频道。
手动选台时,您可以选择:
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
◆ 是否将每个找到的频道都存储起来。
◆ 给每个选定的频道选择台号。
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)", 然后按
按钮。
2.按 ▲ 或 ▼ 按钮选择"Manual Store(手动选台)",
然后按 按钮。
3.通过按 ▲ 或 ▼ 按钮选择所需选项,然后按
4.对您的设置满意时,按
按钮。
按钮。
Channel
TV
Move TV
Enter







Return
Manual Store
Programme Colour System Sound System Channel Search Store :P1
: Auto
: BG
:S6
: 140 MHz
:?


5.按EXIT按钮退出。
◆ Programme(节目): 为频道指定的台号
- 按 ▲ 或 ▼ 按钮,直到找到正确的数字。
➢ 通过按数字按钮(0~9)可以直接选择频道。
Move Enter
Return
◆ Colour System(彩色制式): Auto(自动)/PAL/SECAM/NTSC4.43/NTSC3.58
- 按 ▲ 或 ▼ 按钮,选择所需的彩色制式 。
◆ Sound System(伴音制式): BG/DK/I/M
- 按 ▲ 或 ▼ 按钮,选择所需的伴音标准 。
◆ Channel(频道): 当您知道要存储的频道号时
- 按 ▲ 或 ▼ 按钮,选择 C(无线频道)或 S(有线频道)。
- 按  按钮,然后按 ▲ 或 ▼ 按钮选择所需的号码。
➢ 通过按数字按钮(0~9)可以直接选择频道。
➢ 如果伴音异常或没有伴音,重新选择需要的伴音标准。
◆ Search(搜索): 当您不知道频道号时
- 按 ▲ 或 ▼ 按钮开始搜索。
- 调谐器会扫描频率范围,直到电视屏幕接收到第一个频道或者您选定的频道为止。
◆ Store(存储): 当您存储频道及相关的台号时
- 通过按
按钮设置OK(确定)。
 频道模式
◆ P(节目模式): 调节完成后,您所在地区内的电视台将被指定一个从 P00 至 P99 的位置编号。在此
模式中,可以通过输入位置编号选择频道。
◆ C(无线频道模式): 在此模式中,可以通过输入每个无线电视台的指定编号选择频道。
◆ S(有线频道模式): 在此模式中,可以通过输入每个有线频道的指定编号选择频道。
中文-12
BN68-01507K-00SC_0312.indd 12
添加/锁定频道
使用频道管理,可方便地锁定或添加频道。
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)",
然后按 按钮。







2.按 ▲ 或 ▼ 按钮选择"Channel Manager(频道管理)",
然后按 按钮。
◆ 添加频道
使用频道管理, 您可以添加您要的频道。
3.按
Move Enter
Return
Channel Manager
TV
Channel List
Child Lock
: Off
按钮选择Channel List(频道列表)。


4.通过按 /// 按钮移动到( )字段,选择要添
加的频道,然后按 按钮添加该频道。
➣
果再次按
如
按钮,则该频道旁边的()符号会消失,
而且该频道不会被添加。
➣ 将"Child Lock(频道童锁)"选择为On(开)时" "处于活
动状态。
◆ 锁
定频道
此功能允许您通过屏蔽音频和视频来防止未经授权的
用户(如儿童)观看不适宜的节目。
5.按 ▲ 或 ▼ 按钮选择"Child Lock(频道童锁)",
然后按 按钮。
Move P 1 C3
1 / 10
Prog.
0
C--
1
C3
7.按 ▲ 或 ▼ 按钮选择"Channel List(频道列表)",
然后按 按钮。
2
BBC 1
8.通过按 ▲/▼// 按钮移动到( )字段,选择要锁定
的频道,然后按 按钮。
➣
➣
果再次按 按钮,则该频道旁边的()符号会消失,
如
而且该频道锁定会被取消。
"Child Lock(频道童锁)"被激活时,会显示蓝背景。
9.按EXIT按钮退出。
➣
"Child Lock(频道童锁)"中选择"On(开)"或"Off(关)",
在
可方便地将在 " " 上选择的频道置于活动或不活动
状态。
需按遥控器上的CH LIST(频道列表)按钮,即可选
只
择这些选项。
中文-13
BN68-01507K-00SC_0312.indd 13
Return
Channel List
按钮。
6.按 ▲ 或 ▼ 按钮选择"On(开)",然后按
Enter
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
变更已储存频道的台号
此操作可以改变存储频道的台号。
使用自动选台后,可能需要使用此操作。
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)",
然后按 按钮。
2.按 ▲ 或 ▼ 按钮选择"Sort(变更台号)",
然后按 按钮。
3.通过反复按 ▲ 或 ▼ 按钮,选择想要更改的频道号。
按下 按钮。
➣ 选定的频道号和名称移到右侧。
4.按 ▲ 或 ▼ 按钮移动到要更改的位置,然后按 按钮。
5.对其它待存储频道重复第 3 到 4 步。
Move TV
Return
Sort
Prog.
0
1
2
3
4
5
6
7
8
9
6.按EXIT按钮退出。
Enter







Ch.

C--
C23
S06
S07
S09
S12
S13
S14
S17
C21

Move Name
---------
---------------------------------

Enter
Return
指定频道名称
发送频道信息时,将自动指定频道名称。
这些名称可以更改,您可以指定新的名称。
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)",
然后按 按钮。







2.按 ▲ 或 ▼ 按钮选择"Name(名称)",然后按 按钮。
3.根据需要,通过按下 ▲ 或 ▼ 按钮,选择要指定新名
称的频道。按下 按钮。
➣ 名称框周围显示选择条。
4.
若要
那么
选择一个字母、数字或符号
按  或  按钮
移动到下一个字母上
按 按钮
移回到前一个字母
按 按钮
确认名称
按
Move TV
Enter
Prog.
0
1
2
3
4
5
6
7
8
9
Ch.

C--
C23
S06
S07
S09
S12
S13
S14
S17
C21

Move Name
---------
---------------------------------
Enter
按钮。
➣ 可以选择的字符有:字母表上的字母(A~Z)/数字(0~9)/特殊字符(+、-、*、/、空格)
5.为每个要指定新名称的频道重复第 3 到 4 步。
6.按EXIT按钮退出。
中文-14
BN68-01507K-00SC_0312.indd 14
Return
Name
Return
频道接收微调
可以采用微调操作手动调整特定频道,以便获得最佳接收
效果。
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1.使用数字按钮直接选择要进行微调的频道。
2.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Channel(频道)",然后按
按钮。
3.按 ▲ 或 ▼ 按钮选择"Fine Tune(微调)",然后按
按钮。
0
经过微调的频道保存后,在频道标志上的频道号右侧用星号
" * "标记。
要重设微调,通过按 ▲ 或 ▼ 按钮选择"Reset(复位)",
然后按 按钮。
中文-15
BN68-01507K-00SC_0312.indd 15
Return
P1
5.按EXIT按钮退出。
➣
Enter
Fine Tune
4.按  或  按钮调整微调。
按下 按钮。
➣
Move Reset
Adjust Save







Return
更改图像标准
您可以选择最符合您观看要求的图像类型。
TV
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Picture(图像)",然后按 按钮。
2.再按下
按钮选择"Mode(模式)"。
3.按下 ▲ 或 ▼按钮选择所需图像效果。
按下 按钮。
4.按下EXIT按钮退出。
◆ Dynamic(动态) : 选择在明亮的房间中进行高清晰显
示的图像。
➣
Move Enter
TV

7
95
45
50
50
50



Return
Picture
Mode
: Standard
Dynamic
Backlight
7
Standard
Contrast 95
Movie
Brightness
45
Sharpness 50
Colour 50
Tint
G 50
R 50
Detailed Settings
Picture Options
Reset
: OK
◆ Standard(标准) : 选择在正常环境中进行最佳显示的
◆ Movie(剧场)
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
图像。
: 选择在黑暗的房间中进行舒适显示
的图像。
必须针对每个输入源单独调整图像效果。
Move Enter
Return
还可以通过按下遥控器上的P.MODE(图像效果)按钮来选
您
择其中一个图像设置。
简易设置
1.按下遥控器上的TOOLS按钮。
2.按 ▲ 或 ▼ 按钮选择图像"Picture Mode(画面模式)"。
3.按  或  按钮选择所需选项。
Tools
Anynet+ (HDMI-CEC)
Picture Mode
◄ Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
4.按EXIT或TOOLS按钮退出。
中文-16
BN68-01507K-00SC_0312.indd 16
Move Adjust
Exit
►
调整个人设定图像
您的电视机有几项可供您控制图像质量的设置。
1.要选择所需图像效果,请按照第16页更改图像标准说
明的编号 1 至 3 进行。
2.按下 ▲ 或 ▼ 按钮以选择特定项。按下 按钮。
3.按下  或  按钮来减少或增加特定项的值。
按下 按钮。
4.按下EXIT按钮退出。
◆ Backlight(背光)
TV
: 可通过调节 LCD 背光亮度来调节
屏幕亮度(0~10)。
◆ Contrast(对比度) : 调整对象和背景之间的亮度和暗度。
◆ Brightness(亮度) : 调整整个屏幕的亮度。
◆ Sharpness(清晰度) : 选将对象轮廓调整为更加锐化或钝
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move Enter
Return
▲
Backlight
▼

7
95
45
50
50
50



7
Move Adjust Return
化。
◆ Colour(色度)
◆ Tint(色调)
➣
➣
➣
➣
➣
: 调整颜色,使颜色更亮或更暗。
: 调整对象的颜色,使对象更红或更
绿,从而使其外观更加自然。
调整后的值将根据所选的图像效果进行存储。
在PC模式下,只能调整"Backlight(背光)","Contrast(对比度)"和"Brightness(亮度)"。
(26, 32, 37英寸)
在 PC 模式下,只能调整"Contrast(对比度)"和"Brightness(亮度)"。(40英寸)
仅在 NTSC 广播、分量输入和 HDMI 模式下可以激活"Tint(色调)"功能。
选择"Reset(复位)"可以恢复图像设置的出厂默认值。(请参阅第18页上的"将图像设
置重置为出厂默认值)"降低显示屏亮度能显著降低电视机在使用过程中的能耗,
也能为您降低电视机的运行成本。
为图像配置详细设置
您可以为图像配置详细设置。
1.按下MENU按钮显示菜单
按下按钮选择"Picture(图像)"
TV
2.按下按钮选择"Mode(模式)"。
按 ▲或 ▼ 按钮选择"Standard(标准)"或"Movie(剧场)",
然后按 按钮。
3.按 ▲ 或 ▼ 按钮选择"Detailed Settings(详细设置)",
然后按 按钮。
4.通过按▲或▼按钮选择所需选项,然后按下 按钮。
5.获得理想设置后,按 按钮。
6.按EXIT按钮退出。
➣ 图像模式设置为"Movie(剧场)"或"Standard(标准)"时,
可以选择 "Detailed Settings(详细设置)"。
➣ 在PC模式的"Detailed Settings(详细设置)"中,您仅可调整
"Dynamic Contrast(动态对比度)"、"Gamma(伽玛)"和
"White Balance(白平衡)"。
中文-17
BN68-01507K-00SC_0312.indd 17
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move Enter

7
95
45
50
50
50



Return
Detailed Settings
TV
Black Adjust
: Off
Dynamic Contrast
: Medium
Gamma
: 0
Colour Space
: Native
White Balance
Flesh Tone
: 0
Edge Enhancement : On
Move Enter







Return
♦ Black Adjust(黑色水平调整): Off(关)/Low(低)/Medium(中)/High(高)
可在屏幕上直接选择黑色等级来调整屏幕深度。
♦ Dynamic Contrast(动态对比度): Off(关)/Low(低)/Medium(中)/High(高)
可对屏幕对比度加以调整,以获得最佳对比度。
♦ Gamma(伽玛): - 3 ~ + 3
可调整图像的中级亮度。
按  或  按钮,直到获得最佳设置。
♦ Colour Space(色彩空间): Auto(自动)/Native(自然)/Custom(个人设定)
色彩空间是一个由红、绿和蓝三色组成的色彩矩阵。
您可选择自己最喜爱的色彩空间以体验最自然的色彩
♦ Auto(自动): 自动色彩空间将根据节目源自动将画面调整到最自然的色温。
♦ Native(自然): 自然色彩空间可提供更深沉、丰富的色温。
♦ Custom(个人设定): 通过此功能,您可根据个人偏好调整色彩范围。
➣
自定义色彩空间
Colour(色度): Red(红色)/Green(绿色)/Blue(蓝色)/Yellow(黄色)/Cyan(青色)/
Magenta(紫红色)通过此功能,您可根据个人偏好调整色彩范围。
将"Colour Space(色彩空间)"设置为"Custom(个人设定)"后即可对"Colour(色度)"进行调整
按 ▲ 或 ▼ 按钮以选择"Red(红色)"、"Green(绿色)"、"Blue(蓝色)"、"Yellow(黄色)"、
"Cyan(青色)"或"Magenta(紫红色)"。按 按钮。
Red(红色)/Green(绿色)/Blue(蓝色): 在"Colour(色度)"中,您可调整选定色彩的 RGB 值。
按 ▲ 或 ▼ 按钮选择"Red(红色)"、"Green(绿色)"或"Blue(蓝色)"进行调整。按按 钮。
按  或  按钮以增大或减小特定 项目的值。按 按钮。
-Reset(复位): 通过此功能,您可将色彩空间恢复为默认值。
♦ White Balance(白平衡): R-Offset(红截止)/G-Offset(绿截止)/B-Offset(蓝截止)/R-Gain(红增益)/
G-Gain(绿增益)/B-Gain(蓝增益)/Reset(复位) 可对色温加以调整,以获得更为自然的图像色彩。
红截止/绿截止/蓝截止/红增益/绿增益/蓝增益: 更改调整值将刷新调整的屏幕。
通过按 ▲ 或 ▼ 按钮选择所需选项,然后按下 按钮。
按  或  按钮,直到获得最佳设置。
Reset(复位): 先前调整过的白平衡将复位为出厂默认值。
♦ Flesh Tone(肤色): -15 ~ +15
您可以增强图像中的粉(红)色调。
通过按  或者  进行调整,选择您喜欢的设定.
♦ E
dge Enhancement(边缘增强): Off(关)/On(开)
可以突出对象的边缘。
将图像设置重置为出厂默认值
TV
您可以恢复图像设置的出厂默认值。
1.要选择所需图像效果,请按照第 16 页更改图像标准说
明的编号 1 至 3 进行。
2.按 ▲ 或 ▼ 按钮选择"Reset(复位)",然后按 按钮。
3.按 ▲ 或 ▼ 按钮选择"OK(确定)"或"Cancel(取消)",
然后按 按钮。
4.按下EXIT(退出)按钮退出。
➣
将为每种"Picture(图像)"模式设置"Reset(复位)"。
中文-18
BN68-01507K-00SC_0312.indd 18
Picture
Mode
: Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50
R 50
Detailed Settings
Picture Options
Reset
: OK
OK
Cancel
Move Enter
Return
图像选项
1.按下MENU按钮显示菜单。
按下 按钮选择"Picture(图像)"。
TV
2.按 ▲ 或 ▼ 按钮选择"Picture Options(图像选项)",
然后按 按钮。
3.通过按▲或▼按钮选择所需选项,然后按下
4.对您的设置满意时,按
按钮。
按钮。
5.按EXIT按钮退出。
➣ 在PC模式中,通过图像选项,您仅可对
Colour Tone(色温)和Size(尺寸)进行调整。
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
G 50
R
Detailed Settings
Picture Options
Reset
: OK
Move TV
♦ Colour Tone(色温): Cool2(冷 2)/Cool1(冷 1)/Normal(正常)/
Warm1(暖 1)/Warm2(暖 2)
您可以选择最适合您眼睛的色温。
➣ 调整后的值将根据所选的图像效果进行存储。
➣ 图像模式设置为动态或标准时,无法选择 Warm1(暖 1)
和Warm1(暖 2)。
Enter

7
95
45
50
50
50



Return
Picture Options
Colour Tone Size Digital NR DNle HDMI Black Level Blue Only Mode Move : Normal
: 16:9
: Auto
: Off
: Normal
: Off
Enter






Return
♦ Size(尺寸): 16:9/Wide Zoom(宽度放大)Zoom(放大)4:3/Just Scan(全扫描)
您可以选择最符合您观看要求的图像尺寸。
: 将图像尺寸调整为 16:9,这种尺寸适用于 DVD 或宽广播。
◆ 16:9
◆ Wide Zoom(宽度放大) : 将图像的尺寸放大超过 4:3。
: 垂直放大 16:9 宽屏幕以适合屏幕尺寸。
◆ Zoom(放大)
: 这是视频电影或正常广播所使用的默认设置。
◆ 4:3
: 当输入 HDMI(720p,1080i 或 1080p)分量输入(1080i或1080p)信号时,
◆ Just Scan(全扫描)
使用此功能可 查看完整图像,不会被截断。
➣
➣
➣
➣
➣
➣
➣
在 PC 模式下, 只能调整 16:9 和 4:3 模式。
可以调整和存储已连接到电视输入端口的每台外部设备的设置。
如果在装置上观看静态图像超过两个小时,可能会出现暂时的残影现象。
Wide Zoom(宽度放大): 按  或 按钮选择
后,用 ▲ 或 ▼ 按钮上/下移动屏幕 。
Zoom(放大): 通过按  或  按钮选择 。使用 ▲ 或 ▼ 按钮上下移动图像。
选择 后,使用 ▲ 或 ▼ 按钮来放大或缩小图像的垂直尺寸。
,
) 模式时,您不能再设置图像尺寸。
在"PIP(画中画)"(PIP) 中选择双屏幕 (
在 HDMI (1080i) 或"Component(1080i)"模式下,选择"Just Scan(全扫描)"后:
按下  或  按钮选择 。使用 ▲、▼、 或  按钮移动图像。
Reset(复位): 按  或  按钮选择"复位",然后按下 按钮。您可以将设置初始化。
还可以通过按下遥控器上的P.SIZE(放大)按钮来选择其中一个
您
图像设置。
中文-19
&2/7'CMRHH
♦ Digital NR(数字降噪): Off(关)/Low(低)/Medium(中)/High(高)/Auto(自动)
如果电视接收到的信号较弱,您可激活此功能来帮助减少任何静电和屏幕上出现的重影。
➣
信号弱时,请选择其他选项,直到屏幕显示最佳图像。
♦ DNle: Off(关)/Demo(演示)/On(开)
本电视机包含 DNIe 功能,从而可提供高质量的观赏品质。
如果将 DNIe 设置为On(开),则可以在 DNIe 功能被激活的状态下观看屏幕。
如果将 DNIe 设置为Demo(演示),可以看到观赏品质的差异。
➣
➣
DNIeTM(Digital Natural Image engine 数字自然图像引擎)
此功能通过 3D 降噪、清晰度增强以及对比度和亮度增强为您带来更清晰的画面。
新的画面补偿算法可以提供更亮、更清晰、更详细的图像。
DNIeTM 技术使得所有信号都舒适无比。
此功能仅在动态模式才可使用。
♦ HDMI Black Level(HDMI 黑色水平): Normal(正常) / Low(低)
当 HDMI 输入在 RGB 有限范围内(16 到 235)遭遇屏幕灼伤(出现黑色水平、低对比度、低色
彩等)时,可使用此功能调整图像质量。
➣ 此功能仅在 HDMI 外部连接 RGB 信号输入时才可使用。
♦ Blue Only Mode(仅蓝色模式): Off(关)/On(开)
此功能仅针对 AV 设备测试专家。此功能可将红色和绿色信号从视频信号中删除,仅显示蓝色信号,从而
产生蓝滤镜效果,以便调整视频设备(如 DVD 播放器、家庭影院等)的色彩和色调。
通过此功能,您可以使用Red(红)/Green(绿)/Blue(蓝)/Cyan(青)/Magenta(紫)/Yellow(黄)色彩条
形图,将色调和色彩调整至与每台视频设备的信号电平相适应的优先值,而无需使用另外的蓝滤镜。
➣ 图像模式设置为剧场或标准时,"Blue Only Mode(仅蓝色模式)"可用。
中文-20
BN68-01507K-00SC_0312.indd 20
观看画中画 (PIP)
您可在主画面中显示一个副画面。这样,您便可观看电视
节目或监控来自任何连接设备的视频输入。
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按
按钮。
2.按 ▲ 或 ▼ 按钮选择"PIP(画中画)",然后按
按钮。
3.通过按 ▲ 或 ▼ 按钮选择所需选项,然后按
按钮。
4.对您的设置满意时,按
TV
按钮。
TV
5.按下EXIT按钮退出。
➣
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
在使用主屏幕观看游戏或自动伴奏录音时,您可能会注意
到画中画窗口中的图像变得有些不自然。
Move 






Enter
Return
PIP
PIP
Source
Size
Position
Programme
: On
: TV
: : : P1
Move 




Enter
Return
Tools
简易设置
1.按下遥控器上的TOOLS(工具)按钮。
2.按 ▲ 或 ▼ 按钮选择"PIP(画中画)",然后按
按钮。
3.按下 ▲ 或 ▼ 按钮以选择特定项。
4.按  或  按钮选择所需选项。
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
: Standard
: Custom
: Off
: Off
: Off
5.按EXIT或TOOLS按钮退出。
♦ PIP(画中画): On(关)/Off(开)
您可以激活或取消画中画功能。
Move 主画面
副画面
Component(分量输入)
电视, AV 1, AV 2
HDMI 1, 2, 3
电视, AV 1, AV 2
PC
电视, AV 1, AV 2
♦ Source(节目源)
作为副画面的节目源。
PIP
 On
Source : TV
Size : Position : Programme : P1
Move ♦ Size(尺寸): / /
可选择副画面的尺寸
➣
仅在主画面为HDMI模式下,"Size(尺寸)"选项可用。
♦ Position(画面位置): / / /
您可以选择副画面的位置。
➣
在PIP(画中画)中选择双屏幕(
,
) 时,无法选择Position(位置)。
♦ Programme(节目)
仅当"Source(节目源)"被设置为"TV(电视)"时,才能选择副画面的频道。
中文-21
BN68-01507K-00SC_0312.indd 21
Enter
Exit
Tools
Adjust

Return
伴音功能
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Sound(伴音)",然后按
按钮。
2.通过按 ▲ 或 ▼ 按钮选择所需选项,然后按
按钮。
3.对您的设置满意时,按
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
TV Speaker
: On
Sound Select : Main
按钮。






4.按EXIT按钮退出。
♦ Mode(模式): Standard(标准)/Music(音乐)/
Movie(剧场)/Speech(语言)/Custom(个人设定)
简易设置
1.按下遥控器上的TOOLS按钮。
2.按 ▲ 或 ▼ 按钮选择"Sound Mode(声音模式)"。
3.按  或  按钮选择所需选项
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode
◄ Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
►
4.按EXIT或TOOLS按钮退出。
♦ E
qualizer(均衡器): Balance(平衡)/100Hz/300Hz/
1kHz/3kHz/10kHz
您的电视机有几项可供控制伴音质量的设置。
➣ 如果您对这些设置进行了任何更改,伴音模式会自
动转到"Custom(个人设定)"。
Move Adjust
Exit
Equalizer
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
♦ SRS TS XT: Off(关)/On(开)
Move Adjust
Return
T
ruSurround XT 是一种专利 SRS
技术,可解决通过两个扬声器播放 5.1
多声道内容的问题。TruSurround 通过任意双扬声器回放系统(包括内部的电视扬声器)使您可以
体验强有力的虚拟环绕音响。它与所有多声道格式完全兼容。
按下遥控器上的SRS按钮选择Off(关)或On(开)。
简易设置
1.按下遥控器上的TOOLS按钮。
Tools
2.按 ▲ 或 ▼ 按钮选择SRS TS XT。
3.按  或  按钮选择Off(关)或On(开)。
4.按EXIT或TOOLS按钮退出。
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT
◄ Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
TruSurround XT、SRS 和标志都是 SRS Labs,
Inc 的商标。
TruSurround XT 技术由 SRS Labs, Inc 授权使用。
中文-22
BN68-01507K-00SC_0312.indd 22
Exit
►
♦ Auto Volume(伴音自动控制): Off(关)/On(开)
每个电视台都有自己的信号条件,如果每次更改频道都要调整音量,那就很麻烦。
使用此功能,您可以自动调整所需频道的音量,在调制信号强时,降低伴音输出,而在调制信号弱
时,提高伴音输出。
♦ TV Speaker(电视扬声器): Off(关)/On(开)
如果您想从独立扬声器听到伴音,请关闭内部放大器。
➣ "TV Speaker(电视扬声器)"设置为Off(关)时,+ 和 - 及MUTE(静音)按钮无效。
➣ 当"TV Speaker(电视扬声器)"设置为Off(关)时,将无法调整 伴音菜单,"Sound Select
(伴音选择)" 除外(当画中画 设置为开时)。
♦ Sound Select(伴音选择): Main(主)/Sub(副)
画中画功能启动时,您可以听到副画面PIP的伴音。
- Main(主): 用于收听主画面的伴音。
- Sub(副): 用于收听副画面的伴音。
选择伴音模式
您可以在"Tools"菜单中设置声音模式。如果设置为"Dual
I-II",屏幕上将显示当前的声音模式。
1.按下遥控器上的TOOLS按钮。
2.按 ▲ 或 ▼ 按钮选择"Dual I-II" 。
3.按 ▲ 或 ▼ 按钮选择所需的选项。
4.按
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll
◄ Mono
按钮。
音频类型
双语 1/2
Move Adjust
Exit
默认设置
Mono(单声道)
MONO(单声道)
Stereo(立体
A2
STEREO(立体声) Mono(单声道)
声)
立体声
DUAL1(双语1)
双声道
DUAL2(双语2)
Mono(单声道)
单声道
Stereo(立体
Mono(单声道)
NICAM
声)
STEREO(立体声)
立体声
Dual(双声道) Mono(单声道) DUAL1(双语1)
DUAL2(双语2)
➣
➣
➣
►
自动更改
DUAL1
(双语1)
自动更改
DUAL1
(双语1)
如果立体声信号较弱,而且发生自动切换,则请切换到单声道模式。
本功能只在立体声模式下可以切换。单声道模式不支持此功能。
此功能在TV模式中可用。
连接耳机(单独出售)
如果您不想在看电视时打扰房间里的其他人,您可以在电视机
上连接一副耳机。
➣
➣
➣
➣
当将耳机插头插入相应插孔后,伴音菜单中只能使用Auto
"Volume(伴音自动控制)"。当画中画设置为开时,"Sound Select
(伴音选择)"也可以使用。
如果音量开得很大,长时间听耳机会损害您的听力。
系统接上耳机后,扬声器就不会发出伴音了。
耳机音量和电视机音量可分别进行调节。
中文-23
BN68-01507K-00SC_0312.indd 23
侧面板
设置和显示当前时间
您可以设置电视机的时钟,这样,您按下显示按钮时,当
前时间就会显示在屏幕上。如果您想使用自动 开/关机功
能,您也必须设置时间。
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP
按钮。
2.按 ▲ 或 ▼ 按钮选择"Time(时间)",然后按
按钮。
按钮选择"Clock Set(时钟设置)"。
3.按
4. 若要 ...
移动到"Month(月)"、"Day(日
期)"、"Year(年)", "Hour(小时)"
或"Minute(分钟)"、"am/pm"。
设置"Month(月)"、"Day(日
期)"、"Year(年)", "Hour(小时)"
或"Minute(分钟)、"am/pm"。
确定
请按...
Move Enter
Return
Clock Set
TV
Month
Day
Year
01
01
2008
Hour
Minute
am/pm
12
00
am
p
 或  按钮。
q
 或  按钮。
按下







按钮。
Move Adjust
Return
5.按下EXIT按钮退出。
➣
➣
如果拔出电源线,您必修再次设置时钟。
您还可以通过按遥控器上的数字按钮来设置 "Month(月)"、"Day(日期)"、
"Year(年)"、"Hour(小时)"、"Minute(分钟)"。
设置关机提示
您可以选择让电视机在 30-180 分钟后自动转到待机模式。
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按 按钮。
2.按 ▲ 或 ▼ 按钮选择"Time(时间)",然后按 按钮。
3.按 ▲ 或 ▼ 按钮选择"Sleep Timer(睡眠定时器)",
然后按 按钮。
4.反复按下▲或▼按钮,直到出现所需时间(Off(关)、
30、60、90、120、150、180)。
按下 按钮。
5.按下EXIT按钮退出。
➣ 定时器变为零时,电视机会自动转到待机模式。
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP
Move 






Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 12 : 00 am
:
Off
:
30
:
:
60
90
120
150
180
简易设置
1.按下遥控器上的TOOLS按钮。
2.按 ▲ 或 ▼ 按钮选择"Sleep Timer(睡眠定时器)"。
3.按  或  按钮选择Minute(分钟)。
Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer
◄ Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
4.按EXIT或TOOLS按钮退出。
中文-24
BN68-01507K-00SC_0312.indd 24
Move Move Adjust
Exit
►
自动打开和关闭电视机
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",
然后按 按钮。
TV
2.按 ▲ 或 ▼ 按钮选择"Time(时间)",然后按
按钮。
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP







3.按 ▲ 或 ▼ 按钮选择Timer 1(定时器1)、Timer 2(定时
器2、Timer 3(定时器3)、然后按 按钮。
➣
您必须先设置时钟。
Move Enter
Return
Timer 1
TV
4按  或  按钮选择所需选项,按 ▲ 或 ▼ 按钮进行
设置。
On Time
5
6
00
:
00
am
Off
00
am
Off
Off Time
00
:
Repeat
♦ O
n Time(定时开机时间):
选择hour(小时)、minute(分钟)、am/pm以及"On(开)"/
"Off(关)"。(要以您满意的设置来激活定时器,
请设置为"On(开)")。
Once
Volume
10
► Move Programme
01
Adjust
Return
♦ Off Time(定时关机时间): 选择hour(小时)、minute(分钟)、
am/pm 以及"On(开)"/"Off(关)"。
(要以您满意的设置来激活定时器,请设置为"On(开)")。
♦ Repeat(重复): 选择"Once(一次)"、"Everyday(每天)"、"Mon ~ Fri(星期一~星期五)"、
"Mon ~ Sat(星期一~星期六)"或"Sat ~ Sun(星期六~星期日)"。
♦ Volume(音量): 选择所需的音量。
➣
➣
♦ Programme(节目): 选择所需的节目。
您可以通过按遥控器上的数字按钮直接设置小时、分钟和节目。
自动关闭电源
将定时器设置为启用时,如果在开机后 3 小时内没有进行任何控制操作,电视机将最终关机。
此功能只在定时器处于启用模式时可用并可防止过热或泄漏,此情况在电视机开机时间过长
时可能出现(例如您外出度假)。
选择您的语言
首次开始使用电视机时,必须选择用于显示菜单和说明文
字的语言。
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按 按钮。
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP







2.按 ▲ 或 ▼ 按钮选择"Language(语言)",然后按 按钮。
3.通过反复按下 ▲ 或 ▼ 按钮选择合适的语言。
按下
按钮。
4.按下EXIT按钮退出。
中文-25
BN68-01507K-00SC_0312.indd 25
Move Enter
Return
开关机旋律/娱乐/省电
1.按下MENU按钮显示菜单。
按 ▲ 或 ▼ 按钮选择"Setup(设置)",然后按 按钮。
TV
2.通过按▲或▼按钮选择所需选项,然后按下 按钮。
3.对您的设置满意时,按 按钮。
Setup
Plug & Play
Language
: English
Time
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP







4.按下EXIT按钮退出。
Move Enter
Return
◆ Melodey(开关机旋律): Off(关)/Low(低)/Medium(中)/High(高)
通过此功能,您可设置电视开关机旋律的声音。
➣ 不播放开关机旋律
− 按下静音按钮后,电视不会输出声音时。
− 将 (音量)按钮调到最小后,电视不会输出声音时。
− 通过"睡眠定时器"功能将电视关闭时。
◆ Entertainment(娱乐): Off(关)/Sports(体育)/Cinema(电影)/Game(游戏机)
在"Entertainment(娱乐)"模式下,您可以选择适合体育、电影和游戏机的最佳显示模式和音效。
- Off(关)
: 关闭娱乐功能。
- Sports(体育)
: 提供适合体育节目的最佳画面质量和音效。
您可以享受到更加震撼的色彩和音效。
: 提供适合电影节目的最佳画面质量和音效。
您可以体验到色彩更丰富的画面和增强的音效。
: 提供适合游戏机的最佳画面质量和音效。
在使用连接到电视的外部游戏机时,此模式可以加快播放速度。
- Cinema(电影)
- Game(游戏机)
➣
如果您将娱乐设置为关以外的值,则画面模式和声音模式会自动切换到娱乐模式。
在这种情况下,用户不能切换到其他模式。
➣
每个输入源的Entertainment(娱乐)设置会被保存。
可以反复按遥控器上的E.MODE(娱乐)按钮以更换娱
您
乐设置。
中文-26
BN68-01507K-00SC_0312.indd 26
♦ Energy Saving(省电): Off(关)/Low(低)/Medium(中)/High(高)/Auto(自动)
此功能根据环境照明条件调整屏幕亮度。
- Off(关): 关闭省电模式。
- Low(低): 以标准模式运行,不考虑环境亮度。
- Medium(中): 调整到环境亮度。
- High(高): 进入最大省电模式而不考虑环境亮度。
- Auto(自动): 根据环境亮度,自动选择适合的省电模式。
简易设置
1 按下遥控器上的TOOLS 按钮。
2 按 ▲ 或 ▼ 按钮选择"Energy Saving(省电)"。
3 按  或  按钮选择"Off(关)"、"Low(低)"、
"Medium(中)"、"High(高)"或"Auto(自动)"。
4 按EXIT或TOOLS按钮退出。
➣
在PC模式下,无法使用此功能。(40英寸)
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving
◄ Off
Dual l-ll : Mono
Move Adjust
►
Exit
选择节目源
1.按下MENU按钮显示菜单。按 ▲ 或 ▼ 按钮选择
"Input(输入)"。按 按钮。
2.再按
TV
Input
Source List
: TV 
Edit Name 
Anynet+(HDMI-CEC) 
按钮选择"Source List(节目源)"。
➢ 当您的电视机未与任何外部设备连接时,"Source
List(节目源)"中只有电视被激活。只有在 "AV1"、
"AV2"、"S-Video"、"Component1(分量输入1)"、
"Component2(分量输入2)"、"PC"、"HDMI1"、
"HDMI2"、"HDMI3" 与电视机相连时,它们才能够激
活。
3.按 ▲ 或 ▼ 按钮选择所需设备。
按 按钮。
TV
只需按遥控器上的HDMI按钮, 即可观看HDMI模式。
中文-27
BN68-01507K-00SC_0312.indd 27
Enter
Return
Source List
TV
AV1
: ---AV2
: ---S-Video
: ---Component1
: ---Component2
: ---PC
: ---HDMI1
: ---HDMI2
: ---HDMI3
: ----
过按遥控器上的SOURCE按钮,可以在所有可用节
通
目源中切换。通过按遥控器上的TV或 P / 按钮可
选择电视模式。
Move Move Enter
Return
编辑输入源名称
为连接到输入插口的设备命名,便于进行输入源选择。
1.按下MENU按钮显示菜单。
按▲或▼按钮选择"Input(输入)",然后按
TV
按钮。
Input
Source List
: TV 
Edit Name 
Anynet+(HDMI-CEC) 
2.按 ▲ 或 ▼ 按钮选择"Edit Name(名称编辑)",
然后按 按钮。
3.按下 ▲ 或 ▼ 按钮选择要编辑的设备。
按下 按钮。
4.按下 ▲ 或 ▼ 按钮选择所需的设备。
按下 按钮。
5.按下EXIT按钮退出。
TV
BN68-01507K-00SC_0312.indd 28
Enter
Return
Edit Name
AV1
AV2
S-Video
Component1
Component2
PC
HDMI1
HDMI2
HDMI3
中文-28
Move Move : ------: ---VCR
: ---DVD
: ---: ---- Cable STB
: ----Satellite STB
PVR
: ---: ----AV Receiver
: ---- Game
q
Enter
Return
设置您的 PC(个人电脑)软件(以 Windows XP 为例)
电脑的 Windows 显示设置一般如右所示。 视 Windows 的具
体版本和视频卡的不同,每个人的实际 PC 屏幕显示可能不同。
即使实际屏幕看起来有所不同,相同的基本设置信息几乎可应用
于所有情况。(如这里介绍的设置方法对您的电脑不适用,请与
您的电脑制造商或者三星经销商联系。)
1.首先,单击 Windows 开始菜单上的 Control Panel (控制面
板)。
2.出现控制面板窗口时,单击 Appearance and Themes (外
观和主题),然后出现一个显示对话框。
3.出现控制面板窗口时,单击 "Display (显示)",然后出现一个显示对话框。
4.找到显示对话框上的 "Settings (设置)" 选项卡。
正确的尺寸设置应为(分辨率): 最优 - 1360 X 768
如果您的显示设置对话框还有场频选项,正确的数值为 "60" 或 "60Hz"。
否则,只需单击 "OK(确定)",退出对话框。
显示模式
屏幕位置和尺寸都视 PC 显示器的类型和分辨率而定。
建议使用表中提供的分辨率。(系统允许使用所支持极限之间的所有分辨率)
➣
➣
➣
➣
➣
D-SUB 输入
模式
分辨率
行频 (kHz)
场频 (Hz)
像素时钟频率
(MHz)
同步极性
(水平/垂直)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
模式
分辨率
行频 (kHz)
场频 (Hz)
像素时钟频率
(MHz)
同步极性
(水平/垂直)
VESA
640 x 480
800 x 600
1024 x 768
1360 x 768
31.469
37.879
48.363
47.712
59.940
60.317
60.004
60.015
25.175
40.000
65.000
85.500
-/+/+
-/+/+
HDMI/DVI 输入
不支持逐行模式。
如果选择非标准的视频格式,则电视机可能出现异常操作。
支持独立模式和复合模式。不支持 SOG。
中文-29
&2/7'CMRHH
设置个人电脑
➣
SOURCE(节目源)按钮选择 PC 模式。
TV
1.按下MENU按钮显示菜单。
按 按钮选择"Picture(图像)"。
2.通过按 ▲ 或 ▼ 按钮选择所需选项,然后按下
按钮。
3.获得理想设置后,按
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Auto Adjustment
Screen Adjustment Detailed Settings
Picture Options
Reset
: OK
按钮。
4.按下EXIT按钮退出。
Move Enter

7
95
45
50





Return
◆ Auto Adjustment(自动调整):
自动调整 PC 屏幕 (自动调整):
自动调整使电视机的 PC 屏幕可以根据输入的 PC 视频信号进
行自动调节。微调、粗调和位置的值是自动调节的。
Auto Adjustment in Progress
Please wait.
Tools
简易设置
1. 按下遥控器上的TOOLS按钮。
Auto Adjustment(自动调整)",
2. 按  或  选择"���������������
然后按 按钮
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
Auto Adjustment
: Standard
: Custom
: Off
: Off
: Off
◆ Screen Adjustment(屏幕调整)
Coarse(粗调)/Fine(微调)
调整图像质量的目的是为了消除或减少图像噪声。
如果微调后仍无法消除噪声,则尽可能进行频率调整(粗调),
然后再进行微调。在噪声减少以后,请重新调整图像,
使之与屏幕中心对齐。
按  或  按钮选择"Coarse(粗调)"或"Fine(微调)",
然后按 按钮。
按  或  按钮调整屏幕质量。
按下
Move TV
Enter
Exit
Screen Adjustment
Coarse
Fine
Position
Image Reset
50
34


按钮。
Position(画面位置)
Move TV
Enter
Return
Position
如果 PC 屏幕位置与电视屏幕不合适,请进行调整。
按  或  按钮调整垂直位置。
按  或  按钮调整水平位置。
按下
按钮。
Image Reset(图像复位)
您可以将所有图像设置替换为出厂默认值。
TV
BN68-01507K-00SC_0312.indd 30
Enter
Return
Screen Adjustment
Coarse
Fine
Position
Image Reset
中文-30
Move Move Enter
50
34


Return
什么是 Anynet+?
Anynet+是一种 AV 网络系统,该系统为用户提供了一个易用的AV接口。如果连接了三星电子
AV 设备,则可以通过 Anynet+ 菜单来控制所有连接的AV设备。
连接 Anynet+ 设备
Anynet+系统仅支持 Anynet+的 AV 设备。在要连接到电视机的AV设备上检查是否存在 Anynet+
标记。
电视
Anynet+ 设备1
HDMI电缆
Anynet+ 设备3
Anynet+ 设备2
HDMI电缆
使用 HDMI 电缆将电视机
上的[HDMI 1]、[HDMI 2]
或[HDMI 3]插孔与相应
Anynet+ 设备的HDMI输出
插孔相连。
HDMI电缆
连接到家庭影院
电视
Anynet+ 设备2
Anynet+ 设备1
HDMI 电缆
HDMI 电缆
Anynet+ 设备3
家庭影院
HDMI 电缆
➢
➢
➢
➢
1. 使
用HDMI电缆将电
视机上的[HDMI1]、
[HDMI2]或[HDMI3]
插孔与相应 Anynet+
设备的 HDMI OUT 插
孔相连。
2. 使
用 HDMI 电缆将家
庭影院的 HDMI IN 插
孔与相应 Anynet+ 设
备的 HDMI 输出插孔
相连。
HDMI 电缆
仅连接一个接收器。
可使用HDMI1.2电缆连接 Anynet+ 设备。有些 HDMI电缆可能不支持 Anynet+ 功能。
当支持 Anynet+ 的 AV 设备处于"待机" 或 "开"状态时,Anynet+ 会正常工作。
Anynet+ 总共可支持多达 8 台 AV 设备。
中文-31
BN68-01507K-00SC_0312.indd 31
设置 Anynet+
Tools
以下设置将使用 Anynet+ 功能。
使用 Anynet+功能
1.
按TOOLS按钮。然后按 按钮选择"Anynet+(HDMICEC)"。
按  或  按钮选择"Setup(设置)",然后按 按钮。
2.按
按钮选择"Anynet+(HDMI-CEC)",然后按
3 按  或  按钮选择"On(开)",然后按
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual l-ll
: Standard
: Custom
: Off
: Off
: Off
: Mono
按钮。
按钮。
➢ 将会启用"Anynet+(HDMI-CEC)"功能。
➢ 如果选择否,则禁用"Anynet+(HDMI-CEC)"功能。
➢ 禁用"Anynet+(HDMI-CEC)"功能时,所有与Anynet+相关的操作
均停用。
Move TV
Enter
Exit
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: Off
Off
Auto Turn Off : Off
On
Searching Connections
Move 关闭电视机时自动关闭 Anynet+ 设备
1.按  或  按钮选择"Auto Turn Off(自动关闭)",然后
按 按钮。
2.通过按  或  按钮选择"Yes(是)",然后按 按钮。
➢将启用自动关闭功能。
➢如果选择"No(否)",自动关闭功能将取消。
按EXIT(退出)按钮退出。
➢ 只有将电视机遥控器的选择设备设置为电视,方可使用
Anynet+ 功能。
➢ 如果将"Auto Turn Off(自动关闭)"设置为"Yes(是)",则关闭电视
机时还会关闭连接的外部设备。
不过,如果设备正在执行录制,则可能不会关闭该设备。
中文-32
BN68-01507K-00SC_0312.indd 32
Enter
Return
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Searching Connections
Move Enter
No
Yes
Return
在 Anynet+ 设备之间浏览和切换
1.按TOOLS按钮。
然后按 按钮选择"Anynet+(HDMI-CEC)"。
TV
2.按  或  按钮选择"Select Device(选择设置)",
然后按 按钮。
3.按  或  按钮选择具体的设备,然后按
这会切换到所选设备。
P9
View TV
按钮。
4.如果找不到所需设备,请按  或  按钮选择
"Setup(设置)",然后按 按钮。
5.按  或  按钮选择搜索连接,然后按 按钮。
按  或  按钮选择"Searching Connections(搜索已
连接的设备。)",然后按 按钮。
将显示消息正在"Configuring Anynet+ connection…"(配置
Anynet+ 连接)。
完成设备搜索后,所连接的设备会在 Anynet+ 菜单中
列出。
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: On

Auto Turn Off :

Searching Connections Move Enter
➢ 切换到所选设备最多可能需要花费 2 分钟的时间。
在执行切换操作期间,您不能取消该操作。
➢ 浏览设备所需的时间是由所连接设备的数目决定的。
➢ 完成设备浏览后,并不显示已找到设备的数目。
➢ 尽管在使用Power(电源)按钮打开电视机时电视机会自动浏览设备,
但在电视机开启后或在某种特殊环境下所连接的设备不会显示在设备
列表中。因此,请选择Searching Connections(搜索连接)菜单来搜索设备。
➢ 如果已经按下SOURCE(节目源)按钮选择了外部输入模式,则无法使用 Anynet+ 功能。
请务必使用TOOLS按钮切换到 Anynet+ 设备。
中文-33
BN68-01507K-00SC_0312.indd 33
Yes

Return
Anynet+ 菜单
Anynet+ 菜单会随着连接到电视机的 Anynet+设备的类型和状态的不同而发生变化。
Anynet+ 菜单
说明
观看电视
从 Anynet+ 切换到电视广播模式。
选择设备
电视机连接到相应设备。
录制
设备中的菜单
设备操作
接收器
设置
开始录制。(此菜单仅用于支持录制的设备。)
显示所连接设备的菜单。显示所连接设备的播放控制菜单。
例如:如果连接了 DVD 录像机,则显示 DVD 录像机的播放控制菜单。
通过接收器输出伴音。
可以设置使用 Anynet+ 的环境。
Anynet+ 模式下可用的电视机遥控器按钮
设备类型
Anynet+ 设备
具有内置调谐器的设备
音频设备
➢
➢
➢
➢
➢
➢
➢
操作状态
可用按钮
切换至设备后,相应设备的菜单显示 数字按钮
在屏幕上时。
按钮
////
彩色按钮EXIT(退出)按钮
切换至设备后,播放文件时。
(向后搜索)
(向前搜索)
(停止)
/
(播放/暂停)
切换至设备后,观看电视节目时。
P</>按钮
接收器处于激活状态时。
+/- 按钮
静音按钮
Anynet+ 功能仅在遥控器设置为电视时可用。
按钮仅在处于可录制状态下时可用。
您不能使用电视机侧面的按钮控制 Anynet+ 设备。只能使用电视机遥控器来控制 Anynet+ 设备。
电视机遥控器在某些条件下可能无法正常使用。此时,请重新选择 Anynet+ 设备。
Anynet+ 功能对于其它制造商生产的产品无效。
在 Anynet+ 模式下,彩色按钮可能无法正常生效。
对
和
操作可能会随着设备的不同而有所变化。
中文-34
BN68-01507K-00SC_0312.indd 34
录制
您可以使用录像机录制电视节目。
按
按钮。
录制开始。(仅在连接了启用 Anynet+ 的录制设备时。)
观看电视状态下录制当前电视节目。
➢在
如果正在通过另一台设备观看视频节目,则会录制该设备中的视频节目。
➢ 还可以通过按下TOOLS按钮进入工具之后选择Record(录制)来录制源数据流。
➢ 录制前,请检查天线插孔是否正确连接到录像设备上。有关与录像设备的天线连接,请参阅相应的
用户手册。
通过接收器收听
您可以通过接收器(而非电视机扬声器)来收听伴音。
1.按TOOLS按钮。
然后按 按钮选择"Anynet+(HDMI-CEC)"。
按  或  按钮选择"Receiver(接收器)",然后按
按钮。
2.按  或  按钮选择"On(开)",然后按
现在,可以通过接收器收听电视伴音。
按钮。
3.按EXIT按钮退出。
TV
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

Setup
Move ➢接收器设置为开时,可以通过 2 频道接收器收听电视伴音。
Return
如
果接收器仅专用于家庭影院(仅支持音频),则该接收器
➢
可能不会显示在设备列表中。
➢如果播放内容存在版权问题,则可能无法通过接收器收听。
➢在通过接收器收听时,会限制对画中画以及与音频相关菜单的使用。
中文-35
BN68-01507K-00SC_0312.indd 35
:Off
Enter

请求维修之前检查以下情况
故障症状
Anynet+不起作用。
我想启动 Anynet+。
解决方法
仅连接一个接收器。
检查 Anynet+ 设备电源线的连接是否正确。
检查 Anynet+ 设备的视频/音频/HDMI 电缆连接。
检查是否在 Anynet+ 设置菜单中将 Anynet+ (HDMI-CEC) 设置为开。
检查电视机遥控器是否处于电视模式。
检查是否为 Anynet+ 专用的遥控器。
Anynet+ 在特定条件下不起作用。(搜索频道)
连接或移去 HDMI 电缆时,请确保再次搜索设备或重新开启电视机。
检查是否已将 Anynet+ 功能设置为开或已打开 Anynet+ 设备。
检查 Anynet+ 设备是否正确连接到电视机,并检查是否在 Anynet+ 设置菜
单中将 Anynet+ (HDMI-CEC) 设置为开。
 按下电视机遥控器上的电视按钮,切换到电视模式。然后按 Anynet+ 按钮
显示 Anynet+ 菜单并选择所需菜单。
 在 Anynet+ 菜单中选择查看电视。
 按电视机控制器上的SOURCE(节目源)按钮,选择一台非 Anynet+ 设备。










我想退出 Anynet+。
/ 、PRE-CH等按钮中的任意一个按钮,切换到电视模式。
P
(注意,只有在尚未连接具有内置调谐器的 Anynet+ 设备时,频道按钮才
可用。)
屏幕上显示消息正在连接到
Anynet+设备。
 在配置 Anynet+ 或切换到观看模式时无法使用遥控器。
 请在 Anynet+ 设置或到观看模式的切换已完成时使用遥控器。
Anynet+ 设备不能播放。
正在进行自动频道浏览时不能使用播放功能。
Anynet+不起作用。
没有显示所连接的设备。
检查设备是否支持 Anynet+ 功能。
检查 HDMI 电缆是否连接正确。
检查是否在 Anynet+ 设置菜单中将 Anynet+ (HDMI-CEC) 设置为开。
重新搜索 Anynet+ 设备。
只能使用 HDMI 电缆连接 Anynet+ 设备。
有些 HDMI 电缆可能不支持 Anynet+ 功能。
 如果由于异常情况(例如,HDMI 缆线或电源线断开或电源故障)而终止
显示,请重复设备扫描。





检查录制设备上的天线插孔是否连接正确。
中文-36
BN68-01507K-00SC_0312.indd 36
图文电视功能(视型号而定)
大多数电视台通过图文电视提供文字信息服务。图文电视服务的索引页将为您提供有关如何
使用该服务的信息。此外,您也可使用遥控器按钮,根据自己的需要选择各种选项。
➢ 为了正确显示图文电视信息,频道接收必须稳定。否则,信息可能会丢失或有些页面可能无法显示。
1 (exit)
图文电视退出(视型号而定)。
2 6 (index)(索引)
用于在查看图文电视时,随时显示索引(内容)页面。
3 8 (store)(存储)
1
7
用于存储图文电视页面。
4 4 (size)(尺寸)
按此按钮可在屏幕的上半部显示放大字母。再次按此按
钮,则可在屏幕的下半部显示放大字母。
8
5 5 (reveal)(显示)
9
用于显示隐藏文本(例如问答比赛的答案)。要显示正常屏
幕,请再次按此按钮。
6 / (teletext on/mix)(图文电视打开/混合)
按此按钮,可在选择提供图文电视服务的频道后激活图文
电视模式。再次按此按钮,可将图文电视与当前播放节目
的屏幕相重叠。
2
3
0
4
!
5
@
7 0 (mode)(模式)
按此按钮可选择图文电视模式(LIST/FLOF(列表/FLOF))。
如果在"列表保存"模式下按此按钮,则会切换为 List(列
表)保存模式。在"列表保存"模式下,可使用8按钮将图
文电视页面保存到列表中。
8 1 (sub-page)(子页面)
用于显示可用的子页面。
#
6
9 2 (page up)(向上翻页)
用于显示下一个图文电视页面。
10 3 (page down)(向下翻页)
用于显示上一个图文电视页面。
11 9 (hold)(保持)
用于在所选页面与多个在其后自动出现的二级页面相链接时,保持所给出页面上的显示
内容。要恢复,请再次按此按钮。
12 7 (cancel)(取消)
用于在搜索页面时显示播放的节目。
13 彩色按钮(红色/绿色/黄色/蓝色)
如果广播公司使用了 FASTEXT 系统,则图文电视页面所包含的不同主题都标了颜色,
按这些彩色按钮,便可选择主题。按与所需主题相对应的按钮中的一个按钮。该页面与
其他彩色信息一起显示,可以用同样方法选择这些信息。
要显示前一个或后一个页面,请按相应的彩色按钮。
➢ 可通过按遥控器上的数字按钮,更改图文电视页面。
中文-37
BN68-01507K-00SC_0312.indd 37
图文电视页面按照六大类组织:
类别
A
B
C
D
E
F
目录
选定的页码。
电视台名称。
当前页码或搜索指示。
日期和时间。
文本。
状态信息。
FASTEXT 信息
➢ 图文电视信息经常被分为多个按顺序显示的页面,可以通过下列方
法访问这些页面:
◆ 输入页码
◆ 选择列表中的一个标题
◆ 选择一个彩色标头(FASTEXT 系统)
➢ 按 TV 按钮,退出图文电视显示。
中文-38
BN68-01507K-00SC_0312.indd 38
墙托架调整����������������������������������
(单独出售)(LA32A350,LA37A350,LA40A350)
安装����������������������
墙托架调整�����������������
后,您就能轻松地调整电视机的位置。
自动墙托架
后面板
串行电缆(未提供)
➢ 型号不同,后面板不同,请参考第4页。
进入菜单
1.按遥控器上的▲,▼, 或  按钮。
Setup
TV
Plug & Play
Language
: English
Time
Wall-Mount Adjustment
Melody
: Medium
Entertainment
: Off
Energy Saving
: Off
PIP
➢ 屏幕将显示墙托架调整屏幕。
➢ 观赏电视时,如果无法通过按方向按钮显示墙托架调整画
面,请通过访问菜单显示该画面。
 按 MENU 按钮以显示菜单。按 ▲ 或 ▼ 按钮选择
"Setup(设置)",然后按 按钮。
 按 ▲ 或 ▼ 按钮选择"Auto Wall-Mount(墙托架)",然后按
按钮。
Move 







Enter
Return
记忆位置
Wall-Mount Adjusment
2.通过 ▲,▼, 或  按钮调整到所需位置。
视屏幕上无 OSD 显示时,按下方向按钮即可使显示墙托
➢电
架调整屏幕。
➢ 按INFO(显示)按钮以复位。按  或  按钮选择是,然后
按 按钮。
该位置将被初始化为默认设置。
Position 1 Adjust Save
2 3
i
Centre
3.按蓝色按钮。
按 ▲ 或 ▼ 按钮选择位置1、位置2或位置3以保存当
前位置。
Save
➢ 如果不想保存当前位置,请按RETURN(返回)按钮。
➢ 选择保存模式时,您不能使用彩色按钮。
4.按
Select a mode to Save.
Position1
按钮保存。
Position2
➢ 选定位置1后,屏幕将显示当前位置另存为位置 1。
5.按
按钮。
➢ 保存的位置将显示在 OSD 的左侧。
中文-39
&2/7'CMRHH
Position3
Adjust Enter
Return
移动到记忆的位置
1.完成步骤 1:访问菜单。
2.按彩色(红色、绿色和黄色)按钮将墙托架移动到保
存的位置。
Wall-Mount Adjusment
Position1
➢通过按红色(位置1)、绿色(位置2)或黄色(位置3)按
钮,您可将墙托架移动到三个预设位置之一。
Position ➢在将位置调整到预设位置后,如果您对位置进行了调整,则
Adjust 屏幕上的位置画面将消失。
➢ 有关墙托架的安装,请参阅随附的《安装手册》。
➢ 有关产品安装以及墙托架的安装和移动,请咨询专业安装公
司。
➢ 在将墙托架安装到墙上时,请仔细阅读《安装手册》。
若要将其安装到其他建筑材料上,请与您最近的经销商联系。
➢ 操作 Anynet+ 时,墙托架将无法运行。
➢ 37、40 和46英寸的型号与旧式电动壁挂支架的型号 (WMN5090A*) 不兼容。
1 Save
2 3
i
Centre
使用 Kensington 防盗锁
Kensington 防盗锁是一种公共场合固定电视设备的工具。装置的外形和锁定方法可能与图中
所示不同。请参阅 Kensington 防盗锁说明书,以便正确使用。
1.将锁定装置插入液晶电视的 Kensington
锁孔(图1),然后朝锁定方向旋转(图2)。
2.连接 Kensington 防盗锁的钢缆。
3.将 Kens ington 防盗锁与一张桌子或固定
重物固定在一起。
➢ Kensington 锁的位置可能随其型号而有所不
同。
中文-40
BN68-01507K-00SC_0312.indd 40
故障诊断:与维修人员联系之前
无伴音或图像
检查电视机的电源线是否与墙壁电源插座连接。

检查是否按下了电视机侧面板上的电源按钮。

检查图像的对比度和亮度设置。

检查音量。

图像正常,但无伴音
检查音量。

检查是否按了遥控器上的静音 按钮。

检查TV Speaker(电视扬声器)是否设置为On(开)。

出现黑屏,电源指示灯 
在电脑上检查电源、信号线。
不断闪烁
电视正在使用其电源管理系统。

将电脑鼠标移动一下或者在键盘上按任意键。

无图像,或者是黑白图 
调整色度设置。
像
检查所选的广播系统是否正确。

伴音和图像干扰
看看有什么电器对电视造成了干扰,将该电器挪开。

换一个电源插座来插电视机的电源线。

图像模糊或者出现雪花 
检
查天线的方向、位置和连接。
点,伴音失真
这种干扰经常是由于使用室内天线引起的。
遥控器发生故障
给遥控器更换电池。

擦拭遥控器的上端(发送窗口)。

检查电池的接线端。

出现"检测信号线"菜单 
检查信号电缆与 PC 或视频信号源的连接是否稳固。
信息
检查 PC 或视频信号源是否已经打开。

在 PC 模式中,屏幕会
显示"设置无效"消息
检查视频适配器的最大分辨率和频率。

将这些数值与显示模式中的数据进行对比。

受损的画面将显示在屏 如果在某些外部设备中选择仅扫描,则受损的画面可能会显示在屏
幕一角
幕的一角。此故障现象为外部设备而非电视所致。
TFT 液晶显示面板所使用的面板由 3,133,440 个子像素组成,需要先进的技术才能生产出来。
但屏幕上可能会有一些过于明亮或黑暗的像素。 这些像素不会影响产品的性能。
中文-41
BN68-01507K-00SC_0312.indd 41
技术和环境规范
型号名称
最大可视图像尺寸
PC 分辨率(最优)
伴音最大输出
尺寸(宽x深x高)
机身
带支座
质量
带支座
环境条件
运行温度
运行湿度
贮存温度
贮存湿度
支架旋转
型号名称
最大可视图像尺寸
PC 分辨率(最优)
伴音最大输出
尺寸(宽x深x高)
机身
带支座
质量
带支座
环境条件
运行温度
运行湿度
贮存温度
贮存湿度
支架旋转
LA26A350
66厘米 / 26英寸
对角线
1360 X 768 @ 60Hz
5W X 2
LA32A350
80厘米 / 32英寸
对角线
1360 X 768 @ 60Hz
10W X 2
670 X 75 X 446mm
670 X 216 X 500mm
800 X 79 X 522mm
800 X 252 X 577mm
10kg
13kg
10°C 到 40°C(50°F 到 104°F)
10% 到 80%,非凝结
-20°C 到 45°C(-4°F 到 113°F)
5% 到 95%,非凝结
0°
-20°~20°
LA37A350
94厘米 / 37英寸
对角线
1360 X 768 @ 60Hz
10W X 2
LA40A350
101厘米 / 40英寸
对角线
1360 X 768 @ 60Hz
10W X 2
916 X 82 X 598mm
916 X 300 X 658mm
990 X 82 X 636mm
990 X 300 X 694mm
18kg
19kg
10°C 到 40°C(50°F 到 104°F)
10% 到 80%,非凝结
-20°C 到 45°C(-4°F 到 113°F)
5% 到 95%,非凝结
-20°~20°
➢ 设计及规格如有改变,恕不另行通知。
➢ 本设备为"B 类"数字仪器。
➢ 有关电源信息,请参阅产品上所附的标签。
中文-42
BN68-01507K-00SC_0312.indd 42
-20°~20°
Download PDF

advertising