Samsung | BD-J7500 | Samsung BD-J7500 User Manual

BD-J7500
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 1
2015-02-02 오후 4:50:59
Safety Information
Warning
CAUTION
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be
blocked or covered.
-- Do not place this apparatus in a confined
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is provided.
-- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
-- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
dealer immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
2
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 2
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
• Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
• If this apparatus does not operate normally in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorised dealer or service
Centre.
English
2015-02-02 오후 4:50:59
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 3
Safety Information
3
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
01
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
• Contact an authorised service Centre for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of
your product.
• Use only a properly grounded plug and wall
outlet.
- An improper ground may cause electric shock
or equipment damage. (Class 1 Equipment
only.)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
• Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a service Centre.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
English
2015-02-02 오후 4:51:00
Safety Information
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
||NOTE |
\\ If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
4
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 4
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
English
2015-02-02 오후 4:51:00
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION
FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
5
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 5
Safety Information
11. Only use attachments/accessories specified
by the manufacturer.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.).
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• The video resolution in 3D play mode is
determined by the resolution of the original 3D
video. You can not change the resolution.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
• Place the 3D video screen at eye level for the
best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function properly.
• This player does not convert 2D content into
3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
01
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
English
2015-02-02 오후 4:51:00
Contents
Safety Information
2
4
4
5
Settings
Warning
Precautions
Using the 3D function
9
Rear Panel
9
10
10
12
12
13
14
14
15
15
15
Accessing the Settings Screen
18
The Home Screen
Buttons on the Remote Control Used for
the Settings Menu
Settings Menu Functions
18Picture
19Sound
20Network
Front Panel
20
Smart Hub
20System
Remote Control
22Support
Tour of the Remote Control
22
22
25
Connections
11
17
17
Getting Started
Accessories
The Initial Settings Procedure
16
Important Safety Instructions
8
16
25
Connecting to a TV
26
Connecting to an Audio System
Method 1 Connecting to an HDMI
compatible AV receiver that supports pass
through
26
Networks and the Internet
Configuring Your Network Connection
Wi-Fi Direct
Upgrading Software
Update now
Auto Update
Method 2 Connecting to an HDMI
compatible AV receiver that does not
support pass through
Method 3 Connecting to an Audio System
(7.1 Channel Amplifier)
Method 4 Connecting to an AV receiver
with a Digital Optical Cable
Connecting to a Network Router
Wired Network
Wireless Network
6
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 6
English
2015-02-02 오후 4:51:01
Media Play
Network Services
Playing Commercial Discs
39
Creating a Samsung Account
28
Playing Photos, Videos, and Music
(Multimedia)
40
Using Samsung Apps
28
28
29
29
31
31
31
33
34
34
34
35
35
35
35
40
Disc Storage & Management
Playing Media Content Saved on a USB
Device
Playing Media Content Saved in a
Computer/Mobile Device
37
37
38
38
38
41
42
43
43
Controlling Video Playback
Buttons on the Remote Control used for
Video Playback
Using the Settings Menu During Playback
Using the Sort by & Options Menus
45
46
46
Starting an Application
Screen Mirroring
Using the Web Browser
Link Browsing and Pointer Browsing
The Control Panel at a Glance
Using the Setting Menu
Linking Your Internet Service Accounts
to the Product
BD-LIVE™
Controlling Music Playback
Buttons on the Remote Control used for
Music Playback
Using the Options Menu During Playback
Using the Sort by & Options Menus on a
File Screen
Repeating Tracks on an Audio CD
Shuffling Tracks on an Audio CD
Appendix
47
Creating a Playlist from an Audio CD
49
50
54
54
Playing Photo Contents
54
Using the Tools Menu During Playback
55
Using the Sort by & Options Menus
Send files
Using the Send Function
Disc and Format Compatibility
Disc types and contents your product can
play
Disc types your product cannot play
Region Code
59
Compliance and Compatibility Notice
60
Network Service Disclaimer
61
63
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 7
Digital Output Selection
Troubleshooting
Logos of Discs the product can play
60
7
Resolution according to the contents type
55
56
Copying Videos, Music or Photos
Additional Information
47Notes
51
36Ripping
37
40The Samsung Apps Screen at a Glance
43
Playing a Disc with User Recorded
Content
Before Using Samsung Apps
Contents
28
Supported Formats
Copy Protection
Licences
Specifications
English
2015-02-02 오후 4:51:01
Getting Started
Accessories
Check for the supplied accessories shown below.
SOURCE
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
4
5
7
8
DISC MENU
3
6
9
TITLE MENU
0
SMART
POPUP
HOME
HOME
REPEAT
HUB
APPS
TOOLS
INFO
RETURN
A
SEARCH
PANDORA
EXIT
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
D
FULL
SCREEN
INPUT
Batteries for Remote Control (AAA Size)
Remote Control
User Manual
HDMI cable
8
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 8
English
2015-02-02 오후 4:51:02
Front Panel
02
POWER BUTTON
Getting Started
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
DISC TRAY
DISPLAY
USB HOST
REMOTE CONTROL SENSOR
||NOTES |
\\ To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\\ When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product
or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v
button on the remote control.
\\ To use Anynet+ (HDMI-CEC) function, connect an HDMI cable to the HDMI 1 terminal.
When you connect the HDMI 2 terminal, Anynet+ (HDMI-CEC) function will not be available.
Rear Panel
7.1CH ANALOG AUDIO OUT
HDMI OUT
HDMI 1 outputs audio and video
HDMI 2 outputs audio only
9
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 9
LAN
DIGITAL AUDIO OUT
English
2015-02-02 오후 4:51:02
Getting Started
Remote Control
Tour of the Remote Control
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs.)
SOURCE
Turn the player on and off.
Press to open and close the disc tray.
Press the number buttons to operate
options.
Use to enter the disc menu.
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
3
4
5
6
7
8
DISC MENU
0
POPUP
Press to pause a disc.
SMART
HOME
HOME
REPEAT
HUB
APPS
TOOLS
INFO
Press to use the Tools menu.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Press to search contents.
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to stop a disc.
Press to move to the Home screen.
TV volume adjustment.
(This button is only available for Samsung
TVs.)
9
TITLE MENU
Press to skip backwards or forwards.
Press to use Apps.
Turn the TV on and off.
(This button is only available for Samsung
TVs.)
RETURN
A
SEARCH
PANDORA
EXIT
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
Press to play a disc.
Allows you to repeat a title, chapter, track
or disc.
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
D
FULL
SCREEN
INPUT
Use to access various audio functions on a
disc.
Press to use the full screen function.
During the Blu-ray Disc/DVDs playback, this
button does not operate.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Installing batteries
||NOTE |
\\ If the remote control does not operate properly:
-- Check the polarity +/– of the batteries.
-- Check if the batteries are drained.
-- Check if the remote sensor is blocked by obstacles.
-- Check if there is any fluorescent lighting nearby.
||CAUTION |
\\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
10
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 10
English
2015-02-02 오후 4:51:03
Connections
Connecting to a TV
03
Connections
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other connections.
-- When you change the connections, turn off all devices before you start.
Audio
Video
||NOTES |
\\ To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI 1 terminal.
If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.
-- The HDMI 2 terminal does not output a video signal.
\\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the
product to an audio system to hear audio.
\\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\\ When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for the first time, the
product automatically sets the HDMI output resolution to the highest supported by the TV.
\\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\\ To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed (category 2) HDMI cable.
\\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
11
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 11
English
2015-02-02 오후 4:51:04
Connections
Connecting to an Audio System
You can connect this product to an audio system using the methods illustrated below.
-- Do not connect the power cord to the wall outlet until you have made all the other connections.
-- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI compatible AV receiver that supports pass through
• Connect an HDMI cable from the HDMI OUT 1 jack on the back of the product to the HDMI IN jack
on your receiver. Connect another HDMI cable from the HDMI OUT jack of your receiver to the HDMI
IN jack of your TV.
• Best quality (Recommended)
-- Your receiver must have UHD pass through capability to pass through UHD video content.
Audio/Video
HDMI
compatible
AV receiver
Video
12
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 12
English
2015-02-02 오후 4:51:05
Method 2 Connecting to an HDMI compatible AV receiver that does not support pass through
Connections
Audio
03
• Connect an HDMI cable from the HDMI OUT 1 jack on the back of the product to the HDMI IN jack
on your your TV. Connect another HDMI cable from the HDMI OUT 2 jack on the product to the HDMI
IN jack on your receiver.
• Best quality (Recommended)
Video
AV Receiver
||CAUTION |
\\ Do not connect the HDMI OUT 1 and HDMI OUT 2 terminals of the product with an HDMI cable.
13
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 13
English
2015-02-02 오후 4:51:05
Connections
Method 3 Connecting to an Audio System (7.1 Channel Amplifier)
• Using 7.1CH audio cables (not supplied), connect the 7.1CH ANALOG AUDIO OUT terminals on the
rear of the Player to the 7.1CH ANALOG AUDIO IN terminals of your Amplifier.
• Better Quality
Method 4 Connecting to an AV receiver with a Digital Optical Cable
• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the
product to the DIGITAL OPTICAL IN jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
7.1 Channel
Amplifier
Method 3
Method 4
||NOTEs |
SURR. : SURROUND
\\ The front left and right outputs on your player
and 7.1 channel amplifier must be connected to hear disc menu audio from
SURROUND BACK
certain Blu-ray discs.
\\ When connecting to a 5.1 channel home Theatre or receiver, connect all the Analogue Audio output jacks from the player
except for the Surround Back Left and Surround Back Right outputs.
\\ If you connect a receiver to the player's OPTICAL DIGITAL AUDIO OUT port, receiver’s audio reproduction may not synchronize
with that of the TV.
14
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 14
English
2015-02-02 오후 4:51:05
Connecting to a Network Router
Wireless Network
03
You can connect your product to your network
router using one of the methods illustrated below.
To use the DLNA network functionality, you must
connect your PC to your network as shown in the
illustrations.
The connection can be wired or wireless.
Broadband
service
Broadband modem
(with integrated router)
||NOTES |
Broadband
service
Or
Router
Broadband
modem
Broadband
service
||NOTES |
\\ Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
\\ DSL users, please use a router to make a network
connection.
15
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 15
Connections
Wireless Router
Wired Network
\\ If your wireless router supports DHCP, this product can
use a DHCP or static IP address to connect to the wireless
network.
\\ Set your wireless router to Infrastructure mode.
Ad-hoc mode is not supported.
\\ The product supports only the following wireless security
key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\\ Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will
not support a connection in compliance with new Wi-Fi
certification specifications.
\\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
English
2015-02-02 오후 4:51:06
Settings
The Initial Settings Procedure
The Home Screen
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration,
and connect the player to the Internet. Follow the
directions on the screen.
When the initial setup is completed, a tutorial
screen explaining how to use the Home menu will
appear. To exit this screen, press the EXIT button
on the remote.
||NOTES |
\\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
22~25 for instructions.
\\ If you want to display the Initial Settings screen again and
make changes, select Settings > System > Setup in
the Home screen or select the Reset option. (See page
22)
\\ If you want to use the Anynet+(HDMI-CEC) function,
please follow the instructions below.
1) Connect the product to an Anynet+(HDMI-CEC)compliant Samsung TV using an HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the product.
3) Set the TV to the Initial Settings Procedure.
16
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 16
3 4 5
1
6
2
PLAY DISC
MULTIMEDIA
SAMSUNG APPS
No Disc
RECOMMENDED
1
MY APPS
2
7
1
2
3
4
5
6
7
8
9
0
3
WebBrowser
2
8
3
Screen Mirroring
9
Settings
0
PLAY DISC : Lets you play photos, videos, or music
content from a Disc.
MULTIMEDIA : Lets you play photos, videos, or
music content from USB or mobile devices or PCs.
Sign In : Lets you log into your Samsung account.
Search : Lets you search for content in Apps and
YouTube by entering corresponding search words.
Help : The tutorial screen explaining how to use the
Home menu will appear.
SAMSUNG APPS : Gives you access to various
applications you can download.
RECOMMENDED : Gives you direct access to
recommended applications.
MY APPS : Apps downloaded from MY APPS are
displayed.
Screen Mirroring : Lets you view the screen of
your smart phone or android tablet on a TV you
have connected to this product.
Settings : Opens the product's menu. In the menu,
you can set various functions to suit your personal
preferences.
English
2015-02-02 오후 4:51:07
SOURCE
VOL
VOL
– + VOL
+–
VOL
||NOTE |
7
8
SMART
TV Aspect Ratio
BD Wise
Resolution
Movie Frame (24 fps)
DVD 24 fps Conversion
APPS
2
1
Auto
2
16:9 Original
Off
Auto
Auto
3
Off
17
INFO
3
RETURN
SEARCH
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration in the next
column.
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 17
REPEAT
TOOLS
Picture
3D Settings
HOME
HOME
A
UHD Output
9
TITLE MENU
Settings
Support
6
04
System
5
1
Settings
Smart Hub
4
HUB
1. Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
Network
3
Buttons on the Remote
Control Used
0 POPUP
for the Settings Menu
Accessing the Settings Screen
Sound
2
DISC MENU
\\ If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the product is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
Picture
SAMSUNG TV
1
4
4
EXIT
B
C
AUDIO SUBTITLE
D
FULL
PANDORA DIGITAL SUBTITLE
HOME button
: Press to move to the Home screen.
SCREEN
INPUT
RETURN button : Press to return to the previous
menu.
v (Enter) / DIRECTION buttons :
• Press ▲▼◄► to move the cursor or select an
item.
• Press the v button to activate the currently
selected item or confirm a setting.
EXIT button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
English
2015-02-02 오후 4:51:07
Settings
Settings Menu Functions
The number indicates the number of lines of video
per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines, the
higher quality.
Picture
UHD Output
Movie Frame (24 fps)
This option outputs HDMI video at UHD (Ultra
High Definition) resolution. This is only available
when Movie Frame is set to Auto.
||NOTES |
\\ To use this feature, you must connect the product to
a device that supports UHD resolution and you must
have content that plays at 24 fps (film speed).
\\ This device cannot play UHD content. However, it can
scale up content resolution lower than Full HD to UHD.
\\ When you select UHD Output, only 2160 x 3840, 24
frame per second output is available.
3D Settings
Select whether to play a Blu-ray Disc with 3D
content in 3D Mode.
If you move to the Home or SAMSUNG APPS
screen while in 3D mode, the product will switch
to 2D mode automatically.
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray Disc/DVD.
Resolution
Set the output resolution of the HDMI video
signal to BD Wise, Auto, 1080p, 1080i, 720p or
576p/480p.
If the product is connected to a 24 fps compatible
TV, setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality.
• You can enjoy the Movie Frame (24 fps) feature
only on a TV supporting this frame rate.
• Movie Frame is only available when the product
is in the HDMI 1080i or 1080p output resolution
modes.
DVD 24 fps Conversion
Converts DVD playback to 24 frames per second
and outputs it via HDMI. This option is only
available when Movie Frame (24 fps) is set to
On.
||NOTE |
\\ This feature applies to NTSC discs only.
Fit Screen Size
Set the screen to the optimal size. (Available for
Smart Hub and Screen Mirroring only)
HDMI Colour Format
Lets you set the Colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate Colour reproduction with greater Colour
depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
18
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 18
English
2015-02-02 오후 4:51:07
Sound
Dynamic Range Control
||NOTES |
\\ To use this feature, you must connect at least one
Multiroom Link speaker.
\\ Sound quality may be affected by the condition of your
wireless network.
\\ The network connection can be negatively affected
and even lost if the network environment deteriorates
over time.
\\ Activating Screen Mirroring disables Multiroom Link.
\\ For further details, refer to the Multiroom Link manual
on the Samsung web site: www.samsung.com ;
; Search for Product name: BDJ7500 ; Manuals ; Multiroom Link ; Download
PDF
\\ The audio from each connected device may lag behind
the video and audio of the device which is playing the
source contents.
Digital Output
Lets you select the digital audio output format that
is suitable for your TV or AV Receiver. For more
details, see the digital output selection table on
page 50.
PCM Downsampling
Settings
You can configure this product to connect to a
Multiroom Link compatible speaker wirelessly and
enjoy rich sound.
Settings : You can adjust volume level and
distance for connected product.
Speaker Settings : You can set up speakers
that are connected via your home network.
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.
Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
04
Speaker Settings
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system.
You can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
• You can set the audio delay time between 0 ms
and 250 ms. Adjust it to the optimal setting.
||NOTE |
\\ The audio delay time you specify may not be exact
depending on the played content.
Lets you choose to have 96kHz PCM signals
downsampled to 48kHz before they are outputted
to an amplifier. Choose On if your amplifier or
receiver is not compatible with a 96kHz signal.
19
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 19
English
2015-02-02 오후 4:51:08
Settings
HDMI Audio Output
Set HDMI audio to output through HDMI1 or
HDMI2.
Auto : Audio output will be set automatically
based on the devices connected to HDMI1 and
HDMI2.
HDMI1 : Audio will output to the device connected
to HDMI1.
HDMI2 : Audio will output to the device connected
to HDMI2.
BD-Live Settings
Set various BD-Live functions. BD-Live allows you
to access extra features available on some Blu-ray
Discs if you are connected to the Internet.
BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live Internet
connection.
BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray
Disc.
Smart Hub
Network
Terms & Policy
Network Status
Lets you check the current network and Internet
status.
Network Settings
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.
Reset Smart Hub
Configure the network connection so you can
enjoy various features such as Internet services
or DLNA functionality, and perform Software
Updates.
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-pear network, without the
need for a wireless router.
Note that if the product is connected to a wireless
network, it may be disconnected when you use
Wi-Fi Direct.
||NOTE |
\\ Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Multimedia Device Settings
System
Setup
Lets you re-run the Initial Settings procedure.
Quick Start
Lets you set the product to turn on quickly by
decreasing the boot time.
||NOTE |
\\ If this function is set to On, Standby power
consumption will be increased.
Lets you control which devices on your network,
such as smart phones and tablets, can share
content with your product.
Device Name
Lets you input a name for the product that will
identify it on your network.
20
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 20
English
2015-02-02 오후 4:51:08
Language
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the product.
Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the
product.
||NOTE |
\\ You can use the keyboard only when a QWERTY
keyboard screen or window appears in the Web
Browser.
Mouse Settings : Lets you configure a wireless
USB mouse connected to the product. You can
use the mouse in the product's menu and the
Web Browser in the same way you use a mouse
on your PC.
`` To use a mouse with the product's menu:
1. Connect the USB mouse to the product.
2. Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
`` If you forget your PIN:
1. Remove any disc or USB storage device.
2. Press and hold the @ button on the top
panel for 5 seconds or more.
The initialization message appears on
the screen, and the power will turn off
automatically.
When you turn your product on again, all
the settings will be reset.
General
You can change the options listed below to match
your preferences.
Front Display : Change the brightness of the
front panel.
Time Zone : Select the time zone in which you
live.
Menu Transparency : Lets you adjust the
transparency of the menu box.
3. Click the menu options you want.
||NOTES |
\\ Some USB HID keyboards and mice may not be
compatible with your product.
\\ Some HID keyboard keys may not work.
\\ Wired USB keyboards are not supported.
Anynet+ (HDMI-CEC)
\\ Some applications may not be supported.
\\ If a wireless HID Keyboard does not operate because
of interference, move the keyboard closer to the
product.
21
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 21
Settings
Device Manager
The default security PIN is 0000. Enter the default
PIN to access the security function if you haven't
created your own PIN. After you have accessed
the security function for the first time, change the
PIN using the Change PIN function.
BD Parental Rating : Prevents playback of
Blu-ray Discs with a rating equal to or above
a specific age rating you have set unless you
enter the PIN.
DVD Parental Rating : Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.
Change PIN : Change the 4-digit PIN used to
access security functions.
04
You can select the language you prefer for the Onscreen menu, disc menu, audio, subtitles, etc.
• The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Security
Anynet+ is a convenient function that offers linked
operations with other Samsung product that
have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using an
HDMI cable.
English
2015-02-02 오후 4:51:08
Settings
Networks and the Internet
DivX® Video On Demand
View DivX® VOD Registration Codes to purchase
and play DivX® VOD contents.
Support
Remote Management
When activated, lets Samsung Call Centre agents
diagnose and fix problems with your player
remotely. Requires an active Internet connection.
||NOTES |
\\ Remote Management service might not be available in
some countries.
\\ To use Remote Management:
1) Call the Samsung Contact Centre and ask for
remote support.
2) Open the player's menu on your TV and go to the
Support section.
3) Select Remote Management, and then read and
agree to the service agreements. When the PIN
screen appears, provide the PIN number to the
agent.
4) The agent accesses your player.
Software Update
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connections before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
ĞĞ
Wired - Automatic
1. In the Home screen, select Settings, and
then press the v button.
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
2. Select Network, and then press the v
button.
Contact Samsung
Provides contact information for assistance with
your product.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
22
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 22
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
39~46. Instructions for configuring the network
connection start below.
3. Select Network Settings, and then press the
v button.
4. Select Wired in the Network Settings
screen, and then press the v button.
5. Select the Connect button, and then press
the v button. The product detects the wired
connection, verifies the network connection,
and then connects to the network.
English
2015-02-02 오후 4:51:08
ĞĞ
Wired - Manual
2. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
3. Select the IP Settings field, and then press
the v button.
4. Select Enter manually in the IP Settings
field, and then press the v button.
5. Select a parameter to enter (IP Address, for
example), and then press the v button.
Use the number keypad on your remote
control to enter the numbers for the
parameter. You can also enter numbers using
the ▲▼ buttons. Use the ◄► buttons on
the remote control to move from entry field
to entry field within a parameter. When done
with one parameter, press the v button.
6. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 5.
7. Repeat Steps 5 and 6 until you have filled in
all parameters.
You can set up a wireless network connection in
four ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
-- WPS PIN
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
ĞĞ
Wireless - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
v button.
4. Select Wireless in the Network Settings
screen, and then press the v button. The
product searches for and then displays a list
of the available networks.
Network Settings
Select your network type.
Network type
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 23
You can connect your Bluray player to the internet.
Please select which wireless
network to use.
iptime23
iptime
\\ You can get the Network parameters from your Internet
provider.
23
Wireless
Wireless network
||NOTE |
8. When finished entering all the parameters,
select OK, and then press the v button.
The product verifies the network connection
and then connects to the network.
Settings
1. Select Network Status. The product
searches for a network, and then displays the
connection failed message.
Wireless Network
04
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and
then follow these steps:
solugen_edu#2
Refresh
WPS(PBC)
5. Select the desired network, and then press
the v button.
6. On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
English
2015-02-02 오후 4:51:08
Settings
||NOTE |
\\ To view the password as you enter it, use the arrow
buttons to select Show Password on the right side, and
then press v button.
7. When finished, select Done and then press
the v button. The product verifies the
network connection and then connects to the
network.
8. When verification is complete, select OK, and
then press the v button.
||NOTE |
\\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 5.
2. The product searches for a network, and
then displays the connection failed message.
3. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
4. Select the IP Settings field, and then press
the v button.
5. Select Enter manually in the IP Settings
field, and then press the v button.
6. Select a parameter to enter (IP Address, for
example), and then press v button. Use
the number keypad on your remote control to
enter the numbers for the parameter. You can
also enter numbers using the ▲▼ buttons.
Use the ◄► buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the v button.
7. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 6.
||NOTE |
\\ You can get the Network parameters from your Internet
provider.
9. When finished, select OK, and then press the
v button. The Security Screen appears.
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
11. When finished, select Done at the right of the
screen, and then press the v button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network, select
OK, and then press the v button.
ĞĞ
WPS(PBC)
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
5. Press the ▲ button on your remote, and then
press the ► button to select WPS(PBC).
6. Press the v button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
7. Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears.
The product connects to the network after
the network connection is verified.
8. Repeat Steps 6 and 7 until you have filled in
all parameters.
24
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 24
English
2015-02-02 오후 4:51:08
ĞĞ
WPS PIN
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press the
v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The product searches for and then displays a
list of the available networks.
5. Select the desired network, and then press
the v button.
6. Select the WPS PIN, and then press the
v button. The PIN pop-up appears.
7. Enter the PIN into the WPS PIN entry field in
the router's set up screen and then save the
the screen.
||NOTES |
\\ Contact the manufacturer of the router for instructions
explaining how to access the route's set up screens or
refer to the router's user's manual.
\\ For a WPS connection, set your wireless router's security
encryption method to AES. WPS connections do not
support WEP security encryption.
Wi-Fi Direct
This function allows you to connect Wi-Fi Direct
devices to the product and each other using a
peer-to-peer network, without a wireless router.
||NOTE |
\\ Bluetooth transmissions can interfere with the Wi-Fi
Direct signal. Before you use the Wi-Fi Direct function,
we strongly recommend that you turn off the Bluetooth
function of any active mobile device.
25
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 25
2. In the Home screen, select Settings, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
Settings
1. In the Home screen, select Settings, and
then press the v button.
1. Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
04
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PIN entry field.
||NOTES |
\\ The current wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
\\ Text files, such as files with a .TXT or .DOC extension, will
not display when you are using the Wi-Fi Direct function.
Upgrading Software
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
• Never turn the product off or back on manually during
the update process.
1. In the Home screen, select Settings, and
then press the v button.
2. Select Support, and then press the v
button.
3. Select Software Update, and then press the
v button.
4. To download update software and update
now, select Update now, and then press the
v button.
5. To let the product download update software
automatically when available, select Auto
Update, and then press the v button. See
"Auto Update" on page 26 for details.
English
2015-02-02 오후 4:51:08
Settings
||NOTES |
\\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\\ Samsung Electronics takes no legal responsibility for
any product malfunction caused by an unstable Internet
connection or consumer negligence during a software
Update.
\\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
Auto Update
You can set the Auto Update function so that the
product downloads new upgrade software when it
is in Auto Update mode.
This allows the product to download upgrade
software automatically, when you are not using it.
1. Press the ▲▼ buttons to select Auto
Update, and then press the v button.
2. Select On / Off.
\\ When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
||NOTE |
Update now
You can use Update now to update the software
through your network connection or by using a
USB flash drive. The network instructions are
below. The USB flash drive instructions are in the
next column.
1. Select Update now, and then press the v
button.
The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3. If it finds a new version, the Update Request
pop-up appears.
4. Select Yes. The product upgrades the
software, turns off, and then turns on
automatically.
5. If you do not select Yes or No in one minute,
the product stores the new upgrade software.
You can upgrade the software later using
Auto Update.
6. If you select No, the product cancels the
upgrade.
\\ To use the Auto Update function, your product must be
connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com.
2. Click OWNERS & SUPPORT > MANUALS &
DOWNLOADS on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number,
a drop down will display products that match
the model number.
4. Left click your product's model number in the
drop down list.
5. On the page that appears, click Downloads.
6. Find Upgrade File (USB type) under
Description.
7. Click the ZIP button in the File column on the
right side of the page.
8. Click Send in the pop-up that appears to
download and save the firmware file to your
PC.
||NOTES |
\\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\\ Do not turn off the product during the Software Update.
It may cause the product to malfunction.
26
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 26
English
2015-02-02 오후 4:51:08
9. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
04
10. Copy the folder to a USB flash drive.
Settings
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
12. In the product’s menu, go to Settings >
Support > Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15. Select Yes. The product upgrades the
software, turns off, and then turns on
automatically.
||NOTES |
\\ There should be no disc in the product when you upgrade
the software using the USB jack.
\\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\\ Do not turn off the product during the Software Update.
It may cause the product to malfunction.
\\ Software Updates using the USB jack must be performed
with a USB flash memory stick only.
27
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 27
English
2015-02-02 오후 4:51:08
Media Play
Your Blu-ray product can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and on the Web.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content
on your PC, you must install DLNA software or
already have DLNA software installed on your PC
and connect the BD Player to your PC via your
network.
||NOTE |
\\ PCs running Windows 7 and Windows 8 have DLNA
software (Play To) built in.
Playing Commercial Discs
1. Press the 8 button to open the disc tray.
2. Place a disc gently into the disc tray with the
disc’s label facing up.
• Cleaning Discs
-- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protective jacket and store
vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, smartphone, camera, or computer on the
product.
||NOTES |
\\ You cannot play media content if the content or the
storage device is not supported by the product.
\\ Backup important files before connecting a USB device.
Samsung is not responsible for damaged or lost files.
Playing Media Content Saved on a USB
Device
3. Press the 8 button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically, press
the 6 button on the remote control.
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
28
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 28
1. Connect your USB device to the product.
2. Press the HOME button and select Storage
in the MULTIMEDIA panel. The USB devices
connected to the product are listed.
3. Select the device you want to connect to.
The folders and files in the selected USB are
listed.
4. Select the media content you want to play
from the list. The media content plays.
||NOTE |
\\ Alternatively, select the Media Type you want to play
(Videos, for example), then select the file you want to play,
and then press the 6 button to play the content.
English
2015-02-02 오후 4:51:09
Allowing a Connection with a Mobile Device
5. To exit, press the 5 button or RETURN
button.
||NOTES |
\\ Only available with Samsung phones supporting DLNA
functionality.
\\ You may experience compatibility issues when attempting
to play media files via a third-party DLNA server.
\\ The content shared by a computer or a mobile device
may not play depending on the encoding type and file
format of the content. In addition, some functions may not
be available.
\\ The media content may not play smoothly depending on
the network status. If the content does not play smoothly,
use a USB storage device.
1. Connect the smart device and product.
2. Press the HOME button and select Network
Device in the MULTIMEDIA panel. Storage
devices connected to the same network as
the product are listed.
3. Select a desired storage device. The folders
and files shared by the selected storage
device are listed.
4. Select the media content you want to play
from the list. The media content plays.
||NOTE |
\\ Alternatively, select the Media Type you want to play
(Videos, for example), select the file you want to play, and
then press the 6 button to play the content.
5. To exit, press the 5 button or RETURN
button.
29
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 29
||NOTE |
Media Play
You can play media content on the product stored
on a a computer or mobile device connected to
the same network as the product.
\\ You can connect to a mobile device on any DLNA DMC
device. DLNA DMC function enables users to connect a
mobile device to the product, search for media content,
and control play operations on the product.
Playing Media Content Saved in a
Computer/Mobile Device
05
\\ If you connect a USB device to the product, a popup
window appears on the screen so that you can easily
navigate the folders and files of the USB device.
(HOME → Settings → Network → Multimedia
Device Settings)
To play the media content stored on a mobile
device, you must allow the connection between
the mobile device and the product.
||NOTE |
1. Navigate to Settings > Network and select
Multimedia Device Settings. The mobile
devices connected to the same network as
the product are listed.
2. Allow connection with the device you wish
to connect to the product. You can only
play media files from devices that have been
allowed to connect to the product.
||NOTE |
\\ If a mobile device requests to play media content, the
connection confirmation window appears on the TV
connected to the product so that you can easily connect
the mobile device.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
2. Use the ▲▼ buttons to select the type of
content you want to view or play All, Photos, Videos or Music - and then
press the v button.
English
2015-02-02 오후 4:51:09
Media Play
||NOTE |
\\ Even though the product will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the MULTIMEDIA screen
and repeating Step 2.
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4. If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v button.
5. Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
6. Press the RETURN button one or more times
to exit a current screen, exit a folder, or to
return to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7. Go to pages 31~38 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
30
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 30
English
2015-02-02 오후 4:51:10
SOURCE
Controlling Video Playback
1
2
3
4
5
6
7
8
Buttons on the Remote Control used for Video Playback
DISC MENU
9
„„
TITLE MENU
0
POPUP
Using the disc menu, title menu, popup
menu, and title list
DISC MENU
button
SMART
HOME
HOME
REPEAT
HUB
„„
APPS
TOOLS buttons
INFO
Playback related
The product does not play sound in Search, Slow
or Step mode.
• To return to normal
playback, press the
RETURN speedEXIT
6 button.
6 button
5 button
7 button
Fast Motion
Play
Slow Motion
Play
Step Motion
Play
Skip Motion
Play
A
B
C
PANDORA
DIGITAL
SUBTITLE
Starts AUDIO
playback.
SUBTITLE
SEARCH
Stops playback.
D
FULL
SCREEN
INPUT
Pauses playback.
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will change.
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
31
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 31
TITLE MENU
button
Media Play
VOL
05
VOL
– + VOL
+of– video content located on a Disc, USB, mobile device or PC. Depending
VOL
You can control the playback
SAMSUNG TV
on the disc or contents, some of the functions described in this manual may not be available.
During playback, press this button to
display the Disc menu.
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press View
to go to the playlist.
POPUP MENU During playback, press this button to
button
display the Popup menu.
Using the Settings Menu During
Playback
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◄► buttons to select the
and
then press the E button.
Play from the
beginning
Select to return to the beginning of the
movie, and then press the v button.
-- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
1. Select Search Titles, and then
press the v button.
Select Scene
2. Use the ▲▼ buttons to select
a title, and then press the v
button.
||NOTE |
\\ When searching DVD title, in stop
mode, enter the INFO button and
title number (01,02,...) you want.
English
2015-02-02 오후 4:51:10
Media Play
-- Chapter Search : Select to play the
chapter of your choice.
Use the 3D menu when playing a 3D
file.
1. Select Chapter Search, and then
press the v button.
2. Use the ▲▼ buttons to select a
chapter, and then press the v
button.
-- Search Time Bar : Select to play
the movie from a selected time
point.
||NOTES |
\\ The 3D menu becomes available
only when you are playing a 3D
video file.
3D
1. Select Search Time Bar, and then
press the v button.
Select Scene
\\ If you move to the Home or Smart
Hub Home screen while in 3D
mode, the product will switch to 2D
automatically.
2. Using the number buttons, enter
the time point you want to go to,
and then press the v button.
||NOTES |
\\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds
one minute each time you press the
◄► buttons.
\\ If the index information in the file
is damaged or the file does not
support indexing, you will not be
able to use the Select Scene
function.
\\ If you run files on a network device
after you have connected the player
to a computer on your network,
Select Scene may not work.
32
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 32
\\ When playing a 3D video, set the
player to Side by Side or Top and
Bottom in 3D Settings so that the
player's settings match the 3D
content format.
Search
Subtitle
Settings
Repeat mode
Full Screen
-- Search Scene : You can use the
Search Scene function during
playback to view or start a movie
from the scene of your choice.
-- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
-- Search Time Bar : Select to play
the movie from a selected time point.
Lets you set the desired subtitle
options.
Lets you repeat a title, chapter, or
specific section.
Lets you set the size of the video image.
English
2015-02-02 오후 4:51:10
\\ When you use the BD wise function,
this menu will not appear.
Multiroom Link
Select to control the volume.
-- Volume : Adjusts the volume level.
Press the ◄► buttons on the
remote control.
-- Mute : Mutes the sound from this
player. Press again to restore the
sound to the previous volume level.
||NOTE |
\\ This menu is only available when
you connect to a Multiroom Link
compatible speaker.
Audio
Use to set the desired audio language.
Subtitle
Use to set the desired subtitle
language.
Audio Sync
Angle
Information
BONUSVIEW
Video
BONUSVIEW
Audio
Select to adjust the audio sync.
Lets you view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change to another angle.
Lets you view video file information.
\\ Depending on the disc or storage device, the menu may
differ.
\\ Video files with high Bit rates of 20Mbps or more strain
the product's capabilities and may stop playing during
playback.
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing video files, select
and then press the v button.
Date
Title
Folder
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 33
Groups all the the video files on the
media or storage device by date. Click
a group to see the videos in that group.
Displays all the video files on the media
or storage device by title.
Displays all the folders on the media or
storage device in alphabetical order.
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
Using the Options Menu
On a file screen containing video files, select
and then press the v button.
Play Selected
Send
Use to set the desired bonusview
option.
33
Media Play
||NOTE |
||NOTES |
05
Picture Mode
Lets you set the picture mode.
-- Dynamic : Increases sharpness and
brightness.
-- Standard : Choose this setting for
most viewing applications.
-- Movie : The best setting for
watching movies.
-- User : Lets you adjust the sharpness
and noise reduction function
respectively.
Lets you select specific files to play.
It works essentially the same for all
media.
Select this menu to upload selected
files to a web site (Picasa, Facebook
etc) or device. To use this menu, you
need to establish an account with the
on-line site, and then log in using the
Log In function. See "Using the Send
Function" on page 38.
English
2015-02-02 오후 4:51:10
Media Play
Controlling Music Playback
You can control the playback of music content
located on a Disc, USB, mobile device or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Using the Options Menu During
Playback
On the music file playback screen, use the ▲▼◄►
and then press the v
buttons to select the
button.
SOURCE
Buttons on the Remote Control used
for Music Playback
– + VOL
+–
VOL
VOL
1
1
2
3
4
5
6
7
8
SMART
POPUP
HOME
HOME
REPEAT
HUB
APPS
3
5
6
5
6
INFO
Information
This function converts CD audio to the
mp3 format and saves the converted
files on a USB device or a mobile
device connected to the product. See
"Ripping" on page 36.
Select to see the (Contents) information.
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
12 buttons : Move to the previous/next track.
RETURN
5 button : Stops a track.
A
4
4
NUMBER buttons : Press the number of a track. The
selected track is played.
TOOLS
2
Ripping
9
TITLE MENU
0
2
1
Play Selected
SAMSUNG TV
DISC MENU
3
VOL
Lets you create a playlist by selecting
specific tracks to play. It works
essentially the same way for all media.
See "Creating a Playlist from an Audio
CD" on pages 35~36.
B
EXIT
C
D
Fast Play (Audio
CD (CD-DA) only)
SEARCH AUDIO SUBTITLE FULL
PANDORA DIGITAL SUBTITLE SCREEN
INPUT
During playback,
press the 3
or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
7 button : Pauses a track.
6 button : Plays the currently selected track.
||NOTE |
\\ If you don't press a button within five seconds of inserting
an Audio CD, the screen is displayed in Full Screen mode.
To go back to the Play List screen, press the RETURN
button on the remote control.
34
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 34
English
2015-02-02 오후 4:51:10
Using the Sort by & Options Menus on
a File Screen
Track
Album
Artist
Genre
Folder
Displays all the music tracks on the
media or storage device in alphabetical
order.
1. On the Playback screen, use the ▲▼◄►
in the lower left corner
buttons to select
of the screen, and then press the v button.
2. Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then
press the v button.
Displays all music on the media or
storage device by album.
TRACK 001
Displays all the music on the media or
storage device by genre.
00:43
TRACK 002
Displays all the the music files on the
media or storage device by artis.
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:40
TRACK 007
00:00:39 00:02:38
Displays all the folders on the media or
storage device.
03:43
TRACK 006
TRACK 001
Media Play
On a file screen containing music files, select the
and then press the v button.
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
05
Using the Sort by Menu
Repeating Tracks on an Audio CD
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
Using the Options Menu
On a file screen containing music files, select the
and then press the v button.
Play Selected
Send
Encoding
Add to Playlist
Lets you select specific tracks to play.
It works essentially the same for all
media.
See the "Repeating Tracks on an Audio
CD" on page 35.
Select to send selected files to other
devices. See "Using the Send Function"
on page 38.
Select to manage the text encoding
options.
Select to create a playlist.
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
35
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 35
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1. On the Playback screen, use the ▲▼◄►
in the lower left corner
buttons to select
of the screen, and then press the v button.
2. Use the ▲▼ to set the Shuffle mode On or
Off, and then press the v button.
Creating a Playlist from an Audio CD
1. With the Playback screen displayed, select
and then press the v button. The
the
Settings menu appears.
2. Use the ▲▼ buttons to select Play Selected,
and then press the v button.
3. Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
English
2015-02-02 오후 4:51:11
Media Play
4. Repeat Step 3 to select and check additional
tracks.
5. To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
6. When done, press the ▲▼ button to select
Play, and then press the v button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
||NOTES |
\\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\\ On the Selection Play screen, you can also choose Select
All, Clear All, and Cancel.
-- Use Select All to select all tracks. This cancels
your individual track selections. When you press the
RETURN button on your remote control or select the
Play button, and then press the v button, all tracks
will appear on the Music Playback screen, and the
product will begin to play all tracks from Track 001.
-- Use Clear All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to
select all the tracks, and then press the RETURN
button on your remote control. If you do not use Select
All or select individual tracks, the Playlist will not
change.
-- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
1. Insert a USB device into the USB jack on the
front of the product.
2. With the Playback screen displayed, select
and then press the v button. The
the
Settings menu appears.
4. Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
5. Repeat Step 4 to select and check additional
tracks.
6. To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
7. When done, select the Rip using the ▲▼
buttons, and then press the v button. The
Rip pop-up appears.
8. Use the ▲▼ buttons to select the device to
store the ripped files to, and then press the
v button.
||NOTE |
\\ Do not disconnect the device while ripping is in progress.
9. If you want to cancel ripping, press the v
button and then select Yes. Select No to
continue ripping.
10. When ripping is complete, the "Successfully
Ripped." message appears. Press the v
button.
11. Press the RETURN button or select Cancel,
and then press the v button to go back to
the Playback screen.
||NOTES |
\\ This function does not work with DTS Audio CDs.
\\ This function may not be supported by some discs.
\\ Ripping encodes music into the .mp3 format at 192kbps.
\\ On the Ripping screen, you can also choose Select All
and Clear All.
\\ Use Select All to select all tracks and press the v
button. This cancels your individual track selections.
\\ Use Clear All to deselect all selected tracks at once.
3. Use the ▲▼ buttons to select Ripping, and
then press the v button.
36
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 36
English
2015-02-02 오후 4:51:11
Playing Photo Contents
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◄► buttons to select the
and
then press the v button.
Slideshow
Settings
Rotate
Zoom
Picture Mode
||NOTE |
Select to change the Slide Show
settings.
-- Speed : Select to set the slide show
speed.
-- Effects : Select to set the slide show
effect.
Select to rotate the picture. (This can
rotate the picture either clockwise or
counter clockwise.)
Select to enlarge the current picture.
(Enlarge up to 4 times)
Select to set the picture mode.
-- Dynamic : Choose this setting to
increase Sharpness.
-- Standard : Choose this setting for
most viewing applications.
-- Movie : This is the best setting for
watching movies.
-- User : Lets you adjust the sharpness
and noise reduction function
respectively.
||NOTE |
Select to listen to music while viewing
a slide show.
||NOTE |
\\ The number of music files available
from external devices will differ
depending on the device.
37
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 37
\\ This menu is only available when
you connect to a Multiroom Link
compatible speaker.
Send
Information
Select to send the selected file to other
devices.
Select to see the (Contents) information.
||NOTES |
\\ Depending on the disc or storage device, the menu may
differ.
\\ To enable the Background Music function, the photo file
must be in the same storage media as the music file.
Note that the sound quality can be affected by the Bit rate of
the MP3 file, the size of the photo, and the encoding method.
\\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing photo files, select the
and then press the v button.
Date
\\ This menu cannot be displayed
when you use the BD Wise
function.
Background
Music
Multiroom Link
Media Play
Using the Tools Menu During Playback
05
You can play photo contents located on a DVD,
USB, mobile device or PC.
Select to control the volume.
-- Volume : Adjusts the volume level.
Press the ◄► buttons on the
remote control.
-- Mute : Mutes the sound from this
player. Press again to restore the
sound to the previous volume level.
Title
Folder
Groups all the the photo files on the
media or storage device by date.
Click a group to see the photos in that
group.
Displays all the photo files on the
media or storage device by title.
Displays all the folders on the media or
storage device.
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
English
2015-02-02 오후 4:51:11
Media Play
Using the Options Menu
On a file screen containing photo files, select the
and then press the v button.
Slide Show
Play Selected
Send
Starts the slide show. Shows all the
files in the current folder, one after
another. If you want to create a slide
show with a selected group of photos,
see Play Selected below.
Lets you select specific photos to see.
It works essentially the same for all
media.
See "Creating a Playlist from an Audio
CD" on pages 35~36 for instructions.
Select this menu to upload selected
files to a web site (Picasa, Facebook
etc) or device. To use this menu, you
need to establish an account with the
on-line site, and then log in using the
Log In function.
See "Using the Send Function" on page
38.
||NOTE |
\\ Depending on the disc or storage device, the menu may
differ.
Send files
DISC/Network
Device  USB
DISC/USB 
Network Device
Photos
Supported
Supported
Videos
Supported
Supported
Music
Supported
You can upload files to a Network Device, or a
device.
1. With the Videos, Music or Photos file screen
displayed, and then press the . The
Options menu appears.
2. Use the ▲▼ buttons to select Send, and
then press the v button.
3. Use the ▲▼◄► buttons to select a file, and
then press the v button. A check appears
to the left of the file.
4. Repeat Step 3 to select and check additional
files.
5. To remove a file from the list, move to the file,
and then press the v button again.
The check on the file is removed.
6. When done, press the ▲▼◄► button to
select Send, and then press the v button.
The Send pop-up appears listing the on-line
sites (Picasa, Facebook, etc.) or devices that
you can send the files to.
7. Select a destination, and then press the v
button.
8. If you are sending the files to an on-line site,
the site starts. Log in and follow the directions
on the screen.
||NOTE |
Copying Videos, Music or Photos
Contents
Using the Send Function
\\ To send files to an on-line site you must have an account
with that site.
Supported
• Disc (CD-DA/CD-R/CD-RW, DVD±R (Finalized)/
DVD+RW/DVD-RW (Finalized))  USB
• PTP USB is not available when you copy to
USB.
38
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 38
English
2015-02-02 오후 4:51:12
Network Services
1. Connect the product to a network.
(See page 15)
9. After you have finished with all the fields,
press the ► button, and then press the v
button. Connecting appears, and then the
account confirmation message.
2. Configure the network settings.
(See pages 22~25)
10. Press the v button. The Set Profile Picture
screen appears.
Creating a Samsung Account
Create a Samsung account so you can take
advantage of all Samsung has to offer on line.
Set up accounts for each household member so
each member can access their own accounts on
Facebook, Twitter, etc. You also need a Samsung
account if you want to download for-pay apps and
rent movies.
1. On the Home screen, press the
In screen appears.
8. Select the Date of Birth field, and then select
numbers using the up and down arrow
buttons or by pressing numbers on your
remote. Press the v button when done.
. The Sign
2. Select Create Account, and then press the
v button.
The Samsung account Terms & Conditions,
Privacy Policy screen appears.
Network Services
To use network services, you must first:
7. Enter a password, your first name, and last
name in the same fashion.
06
You can enjoy various network services such as
streaming video or on-line apps by connecting the
product to your network.
||NOTE |
\\ Samsung sends a confirming e-mail to the address
you entered. You must open the e-mail and respond as
requested to finalize your account.
11. Select a picture to identify your account, and
then press the v button. The Account
Created screen appears.
12. Press the v button. The Home screen
appears.
3. Press the v button to agree, press the ►
button, and then press the v button.
The Create Account screen appears.
4. Select the ID field, and then press the v
button. The keyboard pop-up appears.
5. Enter your e-mail address using the
keyboard. Use the arrow buttons to move
from character to character.
Press v to select a character. Select the
Caps on the left to enter capitals. Select the
123#& to select additional symbols.
6. When finished, select the Done on the
keyboard, and then press the v button.
The Create Account screen reappears.
39
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 39
English
2015-02-02 오후 4:51:13
Network Services
Before Using Samsung Apps
Using Samsung Apps
If you haven’t set up Smart Hub, when you use
Apps for the first time, the product will ask you to
perform the Smart Hub set up procedure.
1. On the Home screen, select SAMSUNG
APPS, and then press the v button.
2. If you haven't set up Smart Hub, the Smart
Hub pop-up appears asking if you want to
set up Smart Hub. Select Yes, and then
press the v button.
3. Select Start, and then press the v button.
The Terms and Policy screen appears.
4. On the Additional Services, Terms and
Conditions and Choices screen, you must
review and agree to both the Smart Hub
Terms and Conditions and the Privacy Policy
to use Smart Hub.
You can download applications from the Internet,
and access various application and view them on
your TV. To access some applications, you need
to have a Samsung account.
The Samsung Apps Screen at a Glance
1
SAMSUNG APPS
RECOMMENDED
1
WebBrowser
3
4
5
2
3
4
5
Most Popular
6
What's New
7
8
9
10
Categories
3
||NOTE |
1
6. Select I agree to all, and then press the v
button. The Setup Complete screen appears.
Press the v button.
2
MY APPS
5. Scroll down, and then click the View details
to review the full documents.
\\ You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
2
2
3
RECOMMENDED : Displays recommended
contents managed by Samsung. You cannot delete
Recommended Apps.
MY APPS : Displays your personal gallery of
applications modifiable on the MY APPS screen.
Most Popular, What’s New and Categories :
Select to view and download additional apps.
The first time you open the SAMSUNG APPS
screen, the Blu-ray player automatically downloads
a group of free apps. Once these apps have been
downloaded, they appear on the SAMSUNG
APPS screen.
To see additional apps, select Most Popular,
What's New, or Categories on the bottom of the
screen, and then press the v button.
Most Popular displays the most popular apps,
What's New the newest. Categories displays a
series of icons representing categories such as
Videos, Games, and Sports. Select a category
icon, and then press the v button. The Blu-ray
player displays the apps in that category.
40
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 40
English
2015-02-02 오후 4:51:14
Downloading an App
||NOTE |
\\ On the Most Popular, What's New, and Categories
screens, a green arrow is displayed on apps you have
already downloaded.
3. Select an app you want to download,
and then press the v button. The Detail
Information screen for the app appears.
4. Select the Download on the screen, and then
press the v button. Download changes to
Cancel and the app begins to download.
5. If you want to cancel the download, select
Cancel, and then press the v button.
6. When the download is complete, Cancel
changes to Open. Select Open, and then
press the v button to start the application.
Alternately, press the RETURN button until
the SAMSUNG APPS screen reappears.
The app you downloaded will be displayed
on the SAMSUNG APPS screen under MY
APPS.
||NOTE |
\\ If the App cannot be downloaded due to insufficient
remaining internal memory, connect a USB storage device
and try again.
Starting an Application
1. Select SAMSUNG APPS on the Home
screen, and then press the v button.
2. On the SAMSUNG APPS screen, use the
▲▼◄► buttons to select an app, and then
press the v button. The app starts.
41
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 41
1. On the MY APPS screen, select the app you
want to move, and then press the v button
for 3 seconds.
2. Select Move, and then press the v button.
3. Use the ▲▼◄► buttons to move the app.
4. When the app is where you want it, press the
v or EXIT button.
Network Services
2. If you selected Categories, select a category
icon, and then press the v button.
Otherwise, go to Step 3.
Move
06
1. Select Most Popular, What's New, or
Categories, and then press the v button.
The Options Menu
Delete
1. On the MY APPS screen, select the app you
want to delete, and then press the v button
for 3 seconds.
2. Select Delete, and then press the v button.
3. Use the ◄► buttons to select Yes, and then
press the v button.
Delete Multiple
1. On the MY APPS screen, select an app you
want to delete, and then press the v button
for 3 seconds.
2. Select Delete Multiple, and then press the
v button.
3. Use the ▲▼◄► buttons to select apps
you want to delete, and then press the v
button. A check appears next to each app
you select.
||NOTE |
\\ You can deselect an app by highlighting it again, and then
pressing the v button.
4. Use the ▼ button to select Delete at the
bottom of the screen, and then press the v
button.
||NOTE |
\\ You can also select Cancel, Select All, or Deselect All at
the bottom of the screen.
English
2015-02-02 오후 4:51:14
Network Services
View Details
||NOTE |
1. On the MY APPS screen, select the app
you want to see detailed information for, and
then press the v button for 3 seconds. The
Options menu appears.
2. Select View Details, and then press the v
button.
Change View
This function toggles the Apps screen between
the Most Played view and the Custom View, which
lets you arrange the apps to your liking.
1. On the MY APPS screen, select an app, and
then press the v button for 3 seconds.
2. Select Change View, and then press the v
button.
3. Select Yes if you want to change the view.
Select No if you want to keep the current
view.
4. Press v button.
Update Apps
1. On the MY APPS screen, select any app,
and then press the v button for 3 seconds.
2. Select Update Apps, and then press the v
button.
3. The Update Samsung Apps screens lists all
the apps that have updates available. Select
each app you want to update, and then press
the v button. You can also choose Select
All to update all the apps listed.
4. Select Update, and then press the v button.
Screen Mirroring
Lock/Unlock
This function blocks access to an app unless you
enter your PIN. Unlock removes the lock.
1. On the MY APPS screen, select an app you
want to lock, and then press the v button
for 3 seconds.
2. Select Lock/Unlock, and then press the v
button. Enter your PIN.
3. Use the ▲▼◄► buttons to select an app
you want to lock.
4. Press the v button. A check appears next
to the app.
5. To de-select an app, highlight the app, and
then press the v button.
6. After you have selected all the apps you want
to lock, select Save at the bottom of the
screen, and then press v button. Locks
appear next to all the apps you selected.
42
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 42
\\ You can also select Cancel, Select All, or Deselect All at
the bottom of the screen.
To unlock apps, follow essentially the same
directions, but select apps that have locks. When
you select Save and then press the v button,
the locks are removed.
The Screen Mirroring function lets you view the
screen of your smart phone or android tablet on
the TV that you have connected to the product.
1. In the Home screen, select Screen Mirroring,
and then press the v button.
2. Launch AllShare Cast or Screen Mirroring
on your device.
3. On your device, find the name of the player in
the list of available devices and then select it.
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
then displays the connected message.
5. In a few moments, the screen of your device
appears on the TV screen.
6. To stop Screen Mirroring, press the EXIT
or RETURN button on the remote control, or
exit the Screen Mirroring function on your
smart phone.
English
2015-02-02 오후 4:51:14
||NOTES |
\\ Bluetooth transmissions can interfere with the Screen
Mirroring signal. Before using the Screen Mirroring
function, we strongly recommend that you turn off the
Bluetooth function on your smart phone or smart device
(tablet, etc.).
Using the Web Browser
You can access the Internet using the Web
Browser application.
Select WebBrowser on the Home screen, and
then press the v button.
||NOTES |
\\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV - and BD
Wise is on - the browser is maximized to fill the screen
and the TV's resolution is set to the optimal resolution
automatically.
\\ The Web Browser is not compatible with Java
applications.
\\ If you attempt to download a file, and the file cannot be
saved, an error message will appear.
\\ E-commerce (purchasing products online) is not
supported.
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you
launch the browser for the first time, Pointer
Browsing is active. If you are using a mouse to
navigate in the Web Browser, we recommend
leaving Pointer Browsing active. If you are using
your remote to navigate in the Web Browser, we
recommend that you replace Pointer Browsing
with Link Browsing. Link Browsing moves a
highlight from one link to the next in the Web
Browser and is much faster than Pointer Browsing
if you are using your remote.
To activate Link Browsing, follow these steps:
Network Services
\\ When you are using the Screen Mirroring function, video
stuttering or audio dropouts may occur, depending on
your environment.
Link Browsing and Pointer Browsing
06
\\ You can connect your Player to a device that supports
AllShare Cast. Note that all devices that have AllShare
Cast may not be fully supported, depending on the
manufacturer. For further information on mobile
connection support, refer to the manufacturer’s web site.
1. Use the ▲▼◄► buttons on your remote to
move the pointer to the Link Browser icon on
the top right of the screen. The Link Browser
icon is the third icon from the right.
The pointer will be in the correct position
if the icon turns blue and the words “Link
Browsing” appear on the screen.
2. Press the v button. Link Browsing is
activated and will remain active whenever you
bring up the Web Browser.
The Control Panel at a Glance
The Control Panel, which runs across the top
of the screen, has a series of icons which start
a number of useful functions. The icons are
described below, starting with the icon on the far
left of the screen.
http://www.samsung.com
http://www.samsung.com
New Tab
100%
\\ ActiveX is not supported.
\\ Access may be blocked to some websites or to web
browsers operated by certain businesses.
\\ Playing Flash videos is not supported.
43
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 43
English
2015-02-02 오후 4:51:15
Network Services
•
•
•
1
: Moves to the previous page.
: Moves to the next web page.
: Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and delete
bookmarks. You can also view your browsing
history and select a page to revisit.
• : Moves to the Home screen of the Web
Browser.
•
: Lets you enter a page
address manually using the keyboard pop-up.
• : Reloads the current page so that it is
refreshed on the screen.
• : Adds the current page to your bookmarks.
•
: Lets you search for information
by entering words or characters using the
keyboard pop-up. See "Using the Keyboard Popup" below.
•
: Lets you enlarge or shrink the screen
by various percentages.
• / : Lets you switch between Pointer
Browsing and Link Browsing.
• : Lets you configure the Browser’s settings.
See "Using the Setting Menu" on pages 45~46.
• : Closes the Web Browser.
• http://www.samsung.com
: Opens a new web
browser tab.
Using the Keyboard Pop-up
When you click the
, the
or access a data or text entry field,
and then press the v button, the keyboard popup appears.
To use the keyboard pop-up with your remote,
follow these steps:
http://www.samsung.com
New Tab
http://www.samsung.com
http://www.samsung.com
100%
100%
New Tab
1. Use the ▲▼◄► buttons on your remote to
move the highlight to a letter or number of
your choice.
2. Press the v button to enter the letter or
number into the entry field.
3. To access capital letters, move the highlight
to the Caps key on the top left, and then
press the v button. Press the v button
again with the Caps key highlighted to
access small letters again.
4. To access symbols and additional punctuation
marks, highlight the 123#& on the left, and
then press the v button.
5. To delete a character you entered, move the
highlight to the :, and then press the v
button.
6. To delete all the characters you entered,
move the highlight to the Clear and then
press the v button.
7. When finished entering, move the highlight to
the Done and then press the v button.
||NOTE |
\\ If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note that
the wireless keyboard will work only when the keyboard
popup appears and can only be used to enter letters,
numbers, symbols, and punctuation.
Options on the Keyboard Pop-Up
To access the keyboard pop-up options, highlight
the
on the bottom left of the keyboard, and
then press the v button.
Language
Recommended
text
As you enter characters, recommended text will be shown.
Select the language for the keyboard.
You can select English, French,
Russian, etc.
The keyboard suggests recommended
words as you enter text. You can turn
this function On or Off.
Caps 1234567890 :Clear
qw e r t y u i o p^ *
zxcvbnm, . ?-$Cancel
123#&
a
s
d
f
g
h
j
k
l
ENG www..com /
~ @
!

Done
_+%
44
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 44
English
2015-02-02 오후 4:51:16
Accented
character
preview
Select this if you want to type letters
with accent marks.
Approved Sites
Using the Setting Menu
The Setting menu contains functions that control
how the Browser operates and Browser security
functions. To open the Setting menu, highlight
icon in the Control Panel, and then press
the
the v button. To select an option in the Setting
menu, highlight the option, and then press the v
button.
http://www.samsung.com
http://www.samsung.com
100%
New Tab
Enable Grabbing
Approved Sites
Private browsing on
Private
browsing off/
Private
browsing on
Set Search Engine
Web Browser Settings
Help
Close
Enable
Grabbing /
Disable
Grabbing
Turns the Grabber function on and off.
When the Grabber function is on, you
can move a web page up and down
without dragging the scroll bar.
The Grabber function is only available
in Pointer Browsing.
45
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 45
Set Search
Engine
Network Services
Predict Next
Letter
The keyboard predicts the next letter
as you enter letters. The predictions
appear in a ring around the letter you
have just entered. You can select a
predicted letter or move to another
letter. You can turn this function On or
Off.
Lets you restrict your children’s access
to inappropriate web pages by allowing
access only to the web sites you have
registered.
Every time you access this function, the
PIN screen appears. The first time you
access this function, enter the default
PIN, 0000 using the number buttons
on your remote.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
Approved Sites feature : Turns the
Approved Sites function on or off.
Reset password for Approved Sites :
Change the Approved Sites password.
Add current site : Lets you add the
currently displayed web site to the
Approved Sites list.
Manage Approved Sites : Lets you
key in URLs to add to the Approved
Sites List and delete sites from the
Approved Sites list.
If you turn this function on and have
not added any sites to the Approved
Sites list, you will not be able to access
any Internet sites.
06
Reset
recommended
text data
Reset erases the Samsung Keyboard's
memory. Select Reset to erase
everything that the Samsung Keyboard
has learned about your writing style,
including any new words you have
used.
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the URLs
of sites you visit. If you want to enable
Privacy mode, select Yes.
If the Privacy mode is running, the
“Stop” icon appears in front of the URL
at the top of the screen. To disable
Privacy mode, select it again when
Privacy mode is enabled.
You can set the desired Search Engine.
English
2015-02-02 오후 4:51:16
Network Services
Web Browser
Settings
Help
Set as homepage : You can set the
Browser's home page.
Pop-up Block : Turns the Popup Block
on and off.
Page Block : You can determine whether
to block advertisements and select the
URLs for which advertisements are
blocked.
General : You can delete personal
information such as website history
and browsing data (cookies, etc.), and
reset all web browser settings to their
factory defaults. You can also set the
Security Mode.
||NOTE |
\\ Set the Security Mode to On to
avoid accessing malicious/phishing
sites and prevent malicious code
from running.
Encoding : You can set the Encoding
setting for web pages to Automatic or
select the encoding format manually
from a list.
Pointer : You can set the speed of the
cursor when the cursor is set to Pointer
and turn Smart Cursor On and Off.
Browser Information : Displays
the version number and copyright
information for the Web Browser.
Provides basic information about the
operation of the Web Browser.
||NOTE |
\\ Depending on the web site, some of the Web Browser
Setting functions may not be activated. Functions that
are not activated are greyed out and cannot be used.
Linking Your Internet Service
Accounts to the Product
The Link Service Accounts function lets you
link your product to your accounts with Internet
services such as Pandora so that the product can
log you in to the service automatically when you
start the app for that service.
Register your account by going to HOME  Sign
In  Create with Facebook.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
content available on BD-LIVE compliant discs.
1. Attach a USB flash memory drive to the USB
jack on the front of the product, and then
check its remaining memory. The memory
device must have at least 1GB of free space
to accommodate the BD-LIVE services.
2. Select Settings on the Home screen, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select BD-Live Settings, and then press the
v button.
5. Select BD Data Management, and then
press the v button.
6. Select Select Device, and then press the
v button.
7. Select USB device, and then press the v
button.
8. Insert a Blu-ray Disc that supports BD-LIVE.
9. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
||NOTE |
\\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
46
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 46
English
2015-02-02 오후 4:51:17
Appendix
Additional Information
07
Notes
• For some 3D discs, to stop a movie during 3D playback, press the 5 (STOP) button once.
The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 (STOP) button
once. The Home Screen menu appears. Press the 5 (STOP) button again, then select 3D
Settings in the Blu-ray menu.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
Appendix
3D Settings
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the
picture).
BD Wise (Samsung Products only)
Settings
• When BD Wise is On, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does not support BD Wise, you cannot use the BD
Wise function.
• For the proper operation of BD Wise, set the BD Wise option of both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• The Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
through the optical digital output.
• HDMI
-- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
-- If your TV is not compatible with PCM sampling rates over 48kHz, the product will output at
48kHz.
47
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 47
English
2015-02-02 오후 4:51:17
Appendix
BD-LIVE Internet Connection
• What is a valid certificate?
When the product uses BD-LIVE to send the disc data and a request to the server to certify the
disc, the server uses the transmitted data to check if the disc is valid and sends the certificate
back to the product.
• The Internet connection may be restricted while you are using BD-LIVE contents.
BD Data Management
Settings
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on conditions.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio soundtrack in
English.
Media Play
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles, respectively, is displayed.
• If you press the SUBTITLE button on the remote control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar.
48
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 48
English
2015-02-02 오후 4:51:17
Resolution according to the contents type
BD Wise
UHD Output : Auto
Movie Frame : Auto
UHD Output : Off
Movie Frame : Off
Movie Frame : Auto (24 fps)
※ 1080p & 1080i only
1080p
1080i
720p
576p/480p
E-contents/
Digital contents
Resolution of Blu-ray Disc
2160p@24F
1080p@24F
Max. Resolution of TV input
1080p
2160p@24F
1080p@24F
Max. Resolution of TV input
1080p@24F
1080p@24F
1080p
1080i
720p
576p/480p
1080p
1080i
720p
576p/480p
Contents Type
Setup
Auto
Blu-ray Disc
BD Wise
UHD Output : Auto
DVD 24fps Conversion : Auto
Movie Frame : Auto
UHD Output : Off
DVD 24 fps Conversion : Off
Movie Frame : Off
Movie Frame : Auto (DVD 24 fps Conversion : Auto)
※ 1080p & 1080i only
1080p
1080i
720p
576p/480p
Appendix
Auto
Contents Type
07
Setup
DVD
576i/480i
2160p@24F
1080p@24F
Max. Resolution of TV input
Max. Resolution of TV input
1080p@24F
1080p@60F
1080i
720p
576p/480p
||NOTES |
\\ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message "If no
pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to
change the resolution?" appears. If you select Yes, the TV's screen will go blank for 15 seconds, and then the resolution will
revert to the previous resolution automatically.
\\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the @ button
on the top of the product for more than 5 seconds. The initialization message appears on the screen, the player turns off
automatically. When you turn your product on again, all the settings will be reset. Run the Initial Settings procedure again.
Then, go to Settings > Picture > Resolution in the Menu, and select the correct resolution for your TV.
\\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only. Resetting
does not affect your network settings, so you should be able to skip Network Setup and Software Update.
\\ When the factory default settings are restored, all stored user BD data is deleted.
\\ A Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24 fps) mode.
49
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 49
English
2015-02-02 오후 4:51:17
Appendix
Digital Output Selection
Setup
Connection
PCM
Dolby Digital
Dolby Digital
Plus
Audio Stream
Dolby TrueHD
on Blu-ray
Disc
DTS
DTS-HD High
Resolution
Audio
DTS-HD
Master Audio
PCM
Audio Stream Dolby Digital
on DVD
DTS
Definition for
Blu-ray Disc
Bitstream
(Unprocessed)
PCM
Any
HDMI
supported
AV receiver
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
6.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
PCM 2ch
Up to PCM
5.1ch
Up to PCM
6.1ch
Optical
HDMI
supported
AV receiver
Optical
PCM 2ch
PCM
PCM 2ch
Bitstream
(Re-encoded
DTS)
HDMI
HDMI supported
supported AV
AV receiver or
receiver or
Optical
Optical
DTS re-encoded
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
PCM 2ch
Dolby Digital
Dolby Digital DTS re-encoded
Plus
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
PCM 2ch
DTS
DTS-HD High
Resolution
Audio
DTS-HD
PCM 2ch
Master Audio
PCM 2ch
PCM 2ch
PCM 2ch
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
DTS
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
DTS
DTS re-encoded
DTS
DTS re-encoded
DTS
DTS re-encoded
PCM 2ch
PCM 2ch
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
Dolby Digital
DTS
DTS
PCM 2ch Dolby Digital Dolby Digital
PCM 2ch
Bitstream
(Re-encoded
Dolby D)
DTS
Decodes the main
feature audio
and BONUSVIEW
Outputs only the main
feature audio stream so that audio stream
your AV receiver can decode together into PCM
audio and adds
the audio bitstream.
Navigation Sound
You will not hear
Effects, then reBONUSVIEW audio or
Navigation Sound Effects. encodes the PCM
audio into DTS
bitstream.
Re-encoded
Dolby Digital *
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby Digital
bitstream or PCM.
* If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Settings are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
-- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
50
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 50
English
2015-02-02 오후 4:51:18
Troubleshooting
SOLUTION
No operation can be performed with the
remote control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 6.1m from the
product.
• Remove the batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset it.
Reinstall the batteries and try to operate the remote control again.
The disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
The disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message appears on the
screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
• The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot be
changed.
• This is not a problem with the product.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the @ button (on top panel) for more than 5 seconds with no disc
inside. The initialization message appears on the screen, and the player
turns off automatically. When you turn your product on again, all the
settings will be reset.
• When the factory default settings are restored, all stored user BD data will
be deleted.
51
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 51
Appendix
PROBLEM
07
Before requesting service, please try the following solutions.
English
2015-02-02 오후 4:51:18
Appendix
PROBLEM
SOLUTION
Forgot password.
• Press the @ button (on the top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and the
player turns off automatically. When you turn your product on again, all the
settings will be reset.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data will
be deleted.
The picture is noisy or distorted.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports the 576p/480p, 720p, 1080i or 1080p HDMI
input resolution.
Abnormal HDMI output appears on the
screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other problems.
• Go to the table of contents and find the section of the user manual that
contains information about the feature you are having the problem with,
and then follow the procedure again.
• If you still cannot resolve the problem, please contact your nearest
Samsung authorised service Centre.
Play Multimedia on network devices
You can see folders shared on network
devices, but cannot see the files.
• Multimedia list only shows Video, Photo, and Music files. Other types of files
are not displayed.
Video plays intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not
overloaded.
• The wireless connection between the DLNA compatible device and the
product is unstable.
Check the connection.
The Network connection between the product • IP addresses within the same subnetwork should be unique.
and the PC is unstable.
If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
52
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 52
English
2015-02-02 오후 4:51:18
This product cannot connect to the BD-LIVE
server.
• Test whether the network connection is working using the Network Status
function. (See page 20)
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 20)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the content provider or update the product to the
latest firmware.
When using the BD-LIVE service, an error
occurs.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 20)
BD-LIVE
Appendix
SOLUTION
07
PROBLEM
||NOTE |
\\ When the factory default settings are restored, all stored user BD data will be deleted.
53
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 53
English
2015-02-02 오후 4:51:18
Appendix
Disc and Format Compatibility
Disc types and contents your product can play
Media
VIDEO
MUSIC
PHOTO
||NOTES |
Disc Type
Blu-ray Disc
3D Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and
finalized, or a USB storage media containing DivX, MKV, MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing MP3 or WMA contents.
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing JPEG contents.
\\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\\ Your product will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\\ Your product will not play content that has been recorded on a BD-R or USB device at a Bit rate that exceeds 25 Mbps.
\\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
54
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 54
• DVD-RW (VR mode)
• 3.9 GB DVD-R for
Authoring.
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
English
2015-02-02 오후 4:51:18
Region Code
Blu-ray Disc
DVD-VIDEO
3D Blu-ray Disc
BD-LIVE
DivX
Area
a
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
Blu-ray Disc
Appendix
Disc Type
Region
Code
07
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Logos of Discs the product can
play
India, China, Russia, Central and
South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
55
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 55
PAL broadcast System in U.K.,
France, Germany, etc.
English
2015-02-02 오후 4:51:18
Appendix
Supported Formats
Supported Video File Formats
File Extension
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.ps
Container
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
*.webm
WebM
*.rmvb
RMVB
Video Codec
MVC
Motion JPEG
H.264 BP/MP/HP
DivX 3.11 / 4 /
5/6
MPEG4 SP/ASP
Window Media
Video v9(VC1)
AVS
MPEG2
MPEG1
Microsoft
MPEG-4 v3
Window Media
Video v7(WMV1),
v8(WMV2)
H 263 Sorrenson
Microsoft
MPEG-4 v1, v2
VP6
VP8
RV8/9/10
(RV30/40)
Resolution
1920x1080
Frame rate
(fps)
24/25/30
Bit rate (Mbps) Audio Codec
60
FHD : MAX 30
HD : MAX 60
30
1280x720
AC3
LPCM
ADPCM(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS (Core, LBR)
MAX 30
720x576
640x480
1920x1080
6~30
6~30
4
20
Vorbis
1920x1080
6~30
20
RealAudio 6
`` Limitations
-- Even when a file is encoded by a supported codec listed in the Video File Support table, the file might
not play if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
-- Files having a higher Bit rate/frame rate than indicated in the Video File Support table may stutter when
played back.
-- The Seek (Jump) function is not available if the file’s index table is damaged.
-- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
-- Some USB/Digital camera devices may not be compatible with the product.
-- The RMVB format is supported only by models made for China and Hong Kong.
-- The AVS codec is supported only by models made for China.
-- The *.ps file extension is supported only by models made for China.
-- The DivX codec is not supported by models made for America.
56
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 56
English
2015-02-02 오후 4:51:18
`` Video decoder
ĞĞ
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
||NOTE |
\\ Some DivX, MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
Supported Subtitle File Formats
Name
MPEG-4 Timed text
External
Powerdivx
SMPTE-TT Text
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 57
MP4
TTML in smooth
streaming
MP4
MP4
SMPTE-TT TEXT
MP4
SMPTE-TT PNG
Supported Music File Formats
File
Extension
Type
Codec
Support Range
*.mp3
MPEG
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
Supports up to two
channels.
*.ogg
OGG
Vorbis
Supports up to two
channels.
WMA
WMA
.sub or .txt
*.wav
wav
wav
-
.ass
*.mid
*.midi
midi
Type 0, type 1 and
Seek is not supported.
Only available with
USB.
.sub
SubStation Alpha
MPEG-4 Timed text
MKV
*.wma
.ttxt
SubViewer
Advanced SubStation
Alpha
MKV
For WMA. Supports
up to 10 Pro 5.1
channels.
WMA lossless audio
is not supported.
Supports up to M2
profile.
.smi
Micro DVD
SubRip
VobSub
File
Extension
SAMI
SubRip
MKV
MKV
SubStation Alpha
Advanced SubStation
Alpha
Internal
AVI
Appendix
Xsub
`` Audio decoder
-- Supports WMA 10 PRO (Up to 5.1).
-- Does not support WMA lossless audio.
-- Also supports the M2 profile.
-- The RealAudio 10 lossless format is not
supported by models made for China and Hong
Kong.
-- Does not support QCELP/AMR NB/WB.
-- Supports vorbis (Up to 2ch).
-- Supports DD+ (Up to 7.1ch)
-- The DTS LBR codec is supported only for MKV
/ MP4 / TS containers.
File
Extension
Name
07
-- Supports up to H.264 Level 4.1. (Does not
support FMO/ASO/RS)
-- Does not support VC1/AP/L4.
-- CODECs except for WMVv7, v8, MSMPEG4 v3,
MVC, VP6
1) Below 1280 x 720 : 60 frames max.
2) Above 1280 x 720 : 30 frames max.
-- Does not support GMC 2 or higher.
-- Supports SVAF Top/Bottom, Side by Side, Left/
Right view sequence type(2 ES)
-- Supports BD MVC Spec.
.srt
.ssa
.psb
.xml
57
midi
English
2015-02-02 오후 4:51:19
Appendix
File
Extension
Type
Codec
Support Range
*.ape
ape
ape
NonSmart is not
supported.
*.aif
*.aiff
AIFF
AIFF
-
*.m4a
ALAC
ALAC
-
Supported Picture File Formats
File Extension
*.jpg
*.jpeg
*.png
*.bmp
*.mpo
Type
Resolution
JPEG
15360x8640
PNG
4096x4096
BMP
MPO
4096x4096
15360x8640
Notes on the USB connection
• Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
• Some USB/digital camera devices may not be
compatible with the player.
• Your player supports the FAT16, FAT32, and
NTFS files systems.
• Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The player does not support the PTP (Peer to
Peer) protocol.
• Do not disconnect a USB device while it is
transferring or recording data.
• The bigger the image resolution, the longer the
image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
• Your player only supports video that is under
30fps (frame rate).
58
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 58
• Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
• If some USB devices require excessive power,
they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD
manufacturer.
• SAMSUNG is not responsible for any data file
damage or data loss.
• Your player does not support NTFS compressed,
sparse, or encrypted files.
-- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
AVCHD (Advanced Video Codec High
Definition)
• This player can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Color" format.
This player can play back AVCHD discs that use
"x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
||NOTES |
\\ Some AVCHD format discs may not play, depending on
the recording conditions.
AVCHD format discs need to be finalized.
\\ "x.v.Color" offers a wider Colour range than normal DVD
camcorder discs.
English
2015-02-02 오후 4:51:19
Compliance and Compatibility Notice
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 59
Appendix
59
07
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R, DVD-RW/-R; and CD-RW/-R.
• Discs other than the above cannot and/or are not intended to be played by this player. And some of
the above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
player operation issues with new and existing format discs are possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this player, and certain available features may be subject to
delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
-- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
-- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care Centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care Centre.
You may also contact SAMSUNG customer care Centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
• For product progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
English
2015-02-02 오후 4:51:19
Appendix
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, Analogue signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care Centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised recording, use,
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other
materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorised copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a
postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology under Licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2015 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorised by the content owner or service provider. Without limiting the
foregoing, unless expressly authorised by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
60
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 60
English
2015-02-02 오후 4:51:19
07
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
Licences
• Manufactured under Licence from Dolby Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under Licence from DTS
Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS-HD Master Audio is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
• DivX
-- This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
-- To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code
in the DivX VOD section of your device setup menu.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
-- DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
-- Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
-- This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with advanced
features (multi-language subtitles, multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to
your device.
61
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 61
English
2015-02-02 오후 4:51:19
Appendix
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the product
menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
62
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 62
English
2015-02-02 오후 4:51:19
Specifications
HDMI
Audio Output
Network
Video
Audio
7.1 Channel
Digital Audio Output
Ethernet
Wireless LAN
Security
WPS(PBC)
Appendix
USB
1.7 kg
430 (W) X 201 (D) X 46 (H) mm
+5°C to +35°C
10 % to 75 %
USB 2.0
5V 500mA Max.
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
PCM, Bitstream
Front Left/Front Right, Centre, Subwoofer, Surround Left/
Surround Right, Surround Back Left/Surround Back Right
Optical
100BASE - TX Terminal
Built-in
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Supported
07
General
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Type A
DC output
• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• For the power supply and power consumption, refer to the label attached to the product.
• Weight and dimensions are approximate.
63
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 63
English
2015-02-02 오후 4:51:19
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Country
` China
CHINA
HONG KONG
MACAU
` S.E.A
SINGAPORE
Contact Centre 
400-810-5858
(852) 3698 4698
0800 333
1800-SAMSUNG(726-7864)
Web Site
www.samsung.com/cn/
support
www.samsung.com/hk/
support (Chinese)
www.samsung.com/hk_en/
support (English)
www.samsung.com/support
www.samsung.com/sg/
support
www.samsung.com/au/
support
AUSTRALIA
1300 362 603
NEW ZEALAND
0800 726 786
VIETNAM
1800 588 889
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th/
support
1800-88-9999
603-77137477 (Overseas contact)
www.samsung.com/my/
support
MYANMAR
MALAYSIA
INDONESIA
+95-01-2399-888
021-56997777
08001128888
www.samsung.com/nz/
support
www.samsung.com/vn/
support
www.samsung.com/support
www.samsung.com/id/
support
PHILIPPINES
1-800-10-7267864 [PLDT]
02-4222111 [Other landline]
TAIWAN
0800-329999
JAPAN
0120-363-905
www.samsung.com/jp/
support
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
www.samsung.com/in/
support
` S.W.A
INDIA
BANGLADESH
09612300300
SRI LANKA
94117540540
` MENA
EGYPT
08000-7267864
16580
ALGERIA
021 36 11 00
IRAN
021-8255 [CE]
SAUDI ARABIA
8002474357
www.samsung.com/ph/
support
www.samsung.com/tw/
support
www.samsung.com/in/
support
www.samsung.com/support
www.samsung.com/eg/
support
www.samsung.com/n_
africa/support
www.samsung.com/iran/
support
Country
Contact Centre 
PAKISTAN
0800-Samsung (72678) TUNISIA
80-1000-12 U.A.E
800-SAMSUNG (800 - 726 7864)
KUWAIT
183-CALL (183-2255)
OMAN
BAHRAIN
QATAR
800-SAMSUNG (800 - 726 7864)
8000-GSAM (8000-4726)
800-CALL (800-2255)
TURKEY
444 77 11
JORDAN
0800-22273
06 5777444
SYRIA
18252273
MOROCCO
080 100 22 55
` Africa
SOUTH AFRICA
0860 SAMSUNG (726 7864)
NAMIBIA
08 197 267 864
BOTSWANA
ZAMBIA
MAURITIUS
REUNION
MOZAMBIQUE
NIGERIA
Ghana
Cote D’Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
Web Site
www.samsung.com/pk/
support
www.samsung.com/n_
africa/support
www.samsung.com/ae/
support (English)
www.samsung.com/ae_ar/
support (Arabic)
www.samsung.com/tr/
support
www.samsung.com/Levant/
support (English)
www.samsung.com/Levant/
support (English)
www.samsung.com/n_
africa/support
8007260000
0211 350370
23052574020
www.samsung.com/support
262508869
847267864 / 827267864
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095-0077
www.samsung.com/africa_
en/support
www.samsung.com/africa_
fr/support
0800 545 545
0800 300 300
0800 755 755 / 0685 889 900
9999
200
www.samsung.com/support
499999
1969
www.samsung.com/sa/
support
www.samsung.com/sa_en/
support (English)
[BD-J7500-ZK]AK68-02613V-00ENG-.indd 64
2015-02-02 오후 4:51:19
BD-J7500
Blu-ray™ 光碟播放機
使用手冊
用影像記錄一切可能
感謝您選購此款 Samsung 產品。
為了獲得更完善的服務,
請在以下網站註冊您的產品
www.samsung.com/register
[BD-J7500-ZK]AK68-02613V-00HK-.indd 1
2015-02-04 오후 3:16:04
安全資訊
警告
注意
此符號表示內部存在高電壓。以任何形式
接觸本產品的任何內部部件都很危險。
為防止觸電,請勿打開
注意:為了降低觸電的危險,請勿取下前蓋 (或後蓋)。本機內部
沒有使用者可以自行維修的部件。所有維修工作應由有資格的人
員完成。
此符號表示本產品隨附有關操作和維護的
重要資料。
• 外殼中以及背面和底部留有插槽和開口,用於
進行必要的通風。為了確保本裝置的操作可
靠,以及為了避免它過熱,不要阻擋或遮蓋這
些插槽和開口。
-- 切勿將本裝置安裝在狹窄的空間 (例如書櫃或
入牆式櫥櫃) 中,除非可提供適當的通風。
-- 切勿將本裝置散熱器或加熱器附近或上方,
也不要放置在阳光直射到的位置。
-- 切勿將盛水的容器 (花瓶等) 放置在本裝置
上。水濺出來可能引發火災或導致觸電。
• 不要讓本裝置受雨淋或將它放置在水邊 (浴缸、
洗臉盆、廚房洗滌池或游泳池附近等等)。如果
本裝置意外變濕,請立即拔下電源插頭並與授
權經銷商聯絡。
• 本裝置使用電池。您所在的社區中,可能有環
境法規要求您正確處理電池。請與您當地的民
政局聯絡,瞭解處置或回收資訊。
• 不要使牆上插座、延長線或轉接器的負載超出
其容量,因為這可能會引發火災或導致觸電。
• 精心排佈電源線,使得它們不會被踩踏或被放
置於其上的物品壓到。應特別注意插頭端子
處、牆上插座處以及從裝置中伸出處的電線。
2
[BD-J7500-ZK]AK68-02613V-00HK-.indd 2
• 為了保護本裝置免受雷暴襲擊,或者當長時間
無人看管或不使用本裝置時,請從牆上插座拔
下電源插頭,並斷開天線或纜線系統的連接。
這樣一來,便可以防止閃電和電源線浪湧損傷
裝置。
• 在將交流電源線連接至直流電源轉接器插座之
前,請確保直流電源轉接器的電壓額定值與當
地的電源相稱。
• 千萬不要將任何金屬物品插入本裝置的有縫隙
的部件中。這樣做會造成觸電的危險。
• 為了避免觸電,千萬不要觸摸本裝置的內部。
只應該由有資格的技術人員打開本裝置。
• 插入電源插頭時,請確保它已牢固地插入到
位。從牆上插座拔下電源插頭時,要捏住電源
插頭將其拔出。千萬不要拉電源線來拔出電源
插頭。請勿用濕手觸摸電源線。
• 如果本裝置工作不正常 (尤其是在它發出異常的
聲音或異味時),請立即拔下電源插頭並與授權
經銷商或服務中心聯絡。
繁體中文
2015-02-04 오후 3:16:05
[BD-J7500-ZK]AK68-02613V-00HK-.indd 3
安全資訊
3
• 若要清潔本裝置,請從牆上插座拔下電源插
頭,然後用柔軟、乾燥的布料擦拭產品。不要
使用任何化學品,例如蠟、苯、酒精、稀釋
劑、殺蟲劑、空氣清新劑、潤滑劑或洗滌劑。
這些化學品可能會損傷產品外觀或擦掉印在產
品上的內容。
• 本裝置不可遭受水滴或濺到水。不要在裝置上
放置任何盛滿水的物體 (例如花瓶)。
• 不要通過焚燒的方式處置電池。
• 不要將多個電子裝置插入到同一個墻上插座
中。插座過載會導致它過熱,從而引發火災。
• 如果用錯誤的電池型號更換在遙控器中使用的
電池,則有爆炸的危險。僅用相同或相等型別
的電池更換。
• 警告 - 為了避免火勢蔓延,一律要
使蠟燭和其他有明火的物品遠離產
品。
01
• 外殼維護。
-- 在將其他組件連接到本產品前,請確保將它
們關閉。
-- 如果您突然將產品從很冷的地方搬到很暖和
的地方,則可能會在操作部件和鏡頭上產生
冷凝,從而導致光碟播放異常。如果發生這
種情況,請拔下產品的電源插頭,等待兩個
小時,然後再將插頭連接至電源插座。然後
再次插入光碟並嘗試播放。
• 如果產品將長時間不使用或您要長時間出門,
請從電源插座拔下產品的電源插頭 (尤其是兒
童、老人或行動不便的人將獨自留在家中時)。
-- 堆積的灰塵可能使電源線產生火花、發熱或
絕緣效能下降,從而導致觸電、漏電或引發
火災。
• 如果您要將產品安裝在灰塵大、高溫或低溫、
有化學物質的位置或要它全天候工作的場所 (例
如機場、火車站等),請與授權服務中心聯絡,
瞭解相關資訊。如果不明所以,可能導致產品
嚴重損壞。
• 僅使用恰當接地的插頭和牆上插座。
-- 接地不當可能會導致觸電或裝置損壞。(僅限
1 類裝置。)
• 若要徹底關閉本裝置,必須從牆上插座拔下電
源插頭。因此,牆上插座和電源插頭必須一直
保持方便拔插。
• 請勿讓兒童攀爬產品。
• 請將配件 (電池等) 放置在兒童無法觸及的安全
位置。
• 不要將產品安裝在不平穩的位置 (例如搖搖晃晃
的架子或傾斜的地板) 或會震動的位置。
• 請勿使產品摔到地上或敲擊產品。如果產品受
損,請拔下電源插頭並與服務中心聯絡。
1 類雷射產品
本光碟播放機歸類為 1 類鐳射產品。若未能按照
此手冊的規定使用控制、調校或執行程序,則可
能會讓人受到有害輻射。
注意:
• 本產品使用肉眼看不到的鐳射光線,如果被照
射,則可能會導致有害輻射。請務必依照指示
謹慎地操作本產品。
繁體中文
2015-02-04 오후 3:16:06
安全資訊
• 本產品使用了鐳射。若未能按照此手冊的規定
使用控制、調校或執行程序,則可能會讓人受
到有害輻射。切勿打開蓋子,也不要自行修
理。所有維修工作應由有資格的人員完成。
使用屏蔽電纜和接頭將裝置連接至其他裝置
時,本產品符合 CE 規定。為了防止收音機和電
視等電子裝置產生的電磁干擾,請使用屏蔽的
電纜和接頭進行連線。
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
預防措施
重要安全說明
在使用裝置之前,請仔細閱讀操作說明。請依照
下面列出的所有安全說明操作。
將這些操作說明放在就手的地方,以供以後參考。
1. 閱讀這些說明。
||附註 |
\\ 如果 Blu-ray 光碟/DVD 的區域代碼與本產品的區域代
碼不對應,產品可能無法播放光碟。
重要附註
本裝置的電源插頭配備含保險絲的壓模插頭。保
險絲的值在插頭的插腳面標明。
如果需要更換保險絲,必須使用額定值相同的經
過 BS1362 核准的保險絲。
如果保險絲可拆下,則在沒有保險絲蓋子的情況
下,請勿使用插頭。如果保險絲蓋子需要更換,
其顏色必須與插頭插腳面的顏色相同。更換蓋子
可從經銷商處獲得。
如果插頭不適合家庭中的電源點,或者電源線太
短,無法到達電源點,您應取得合適的、經安全
批准的延長線,或者與經銷商聯絡以獲得幫助。
但是,如果除了剪斷插頭之外別無他法,請取出
保險絲,然後安全地處理插頭。請勿將插頭連接
到電源插座,因為裸露的活動電線會造成觸電的
危險。
4
[BD-J7500-ZK]AK68-02613V-00HK-.indd 4
要斷開裝置的電源,必須將插頭從電源插座拔
下,因此應使電源插頭隨時準備好使用。
本產品裝置及隨附的使用手冊中的相關知識產權
得到了相關第三方的許可。
2. 遵守這些說明。
3. 注意所有警告資訊。
4. 按照所有說明進行操作。
5. 切勿在靠近水的地方使用本装置。
6. 乾布進行清潔。
7. 切勿擋住任何通風口。應按照製造商說明進
行安裝。
8. 不要安裝在散熱器,加熱器,爐子或散熱的
其他裝置(包括 AV 接收器)等熱源附近。
9. 切勿輕視極化插頭或接地式插頭的安全用
途。極化插頭帶有寬窄兩個插腳。接地式插
頭帶有兩個插腳和第三個接地針腳。寬插腳
和第三個針腳均用於安全用途。當提供的插
頭不能插入您的電源插座時,請找電氣技師
換一個新的插座。
繁體中文
2015-02-04 오후 3:16:06
10. 電源線不可踩踏或擠壓,特別是在插頭,連
接插座及裝置的出口位置。
13. 在雷暴期間或長期不使用時,請拔下此裝置。
14. 請向合格的維修人員尋求所有維修幫助。當
裝置遭到任何方式的損壞時就需要進行維
修,如電源線或插頭損壞,灑水或異物跌入
裝置,裝置被雨淋或受潮,裝置不能正常工
作或裝置被摔到地上。
使用 3D 功能
3D 畫面的重要健康及安全資訊。
在使用 3D 功能之前,請閱讀並瞭解下列安全資訊。
• 在觀看 3D 電視時,一些觀看者可能會覺得不
舒服,例如頭暈,噁心和頭痛。
如果您有任何此類症狀,請停止觀看 3D 電
視,取下 3D 主動式眼鏡並休息。
• 長時間觀看 3D 影像會引起眼睛疲勞。如果您
覺得眼睛疲勞,請停止觀看 3D 電視,取下 3D
主動式眼鏡並休息。
• 負責任的成年人應該檢查使用 3D 功能的兒童。
如果兒童報告眼睛疲勞,頭痛,頭暈或噁心,
請讓兒童停止觀看 3D 電視並休息。
5
[BD-J7500-ZK]AK68-02613V-00HK-.indd 5
安全資訊
12. 只能放在製造商指定的手推
車,座台,三角架,支架或
桌子上,或者帶裝置一起出
售。如果使用手推車,移動
手推車/裝置組合時要格外小
心,避免翻倒損壞。
01
11. 僅使用製造商指定的連接件/配件。
• 不要將 3D 主動式眼鏡用於其他用途(例如普
通眼鏡,太陽鏡,護目鏡等)。
• 走路或走來走去時,不要使用 3D 功能或 3D 主
動式眼鏡。如果在走來走去時使用 3D 功能或
3D 主動式眼鏡,則可能會導致您撞上物件,絆
倒或摔倒,從而導致嚴重的人身傷害。
• 如果要欣賞 3D 內容,請使用高速 HDMI 纜線
將 3D 裝置(3D 相容 AV 接收器或電視)連接
到播放機的 HDMI OUT 埠。先戴上 3D 眼鏡再
播放 3D 內容。
• 播放機只能透過連接至 HDMI OUT 埠的 HDMI
電纜來輸出 3D 訊號。
• 因為在 3D 播放模式中,視訊解像度是根據原
始 3D 視訊固定的,所以無法將解像度變更為
您偏好的解像度。
• 在 3D 播放模式中,一些功能(例如 BD Wise,
設定螢幕尺寸或解像度)可能無法操作。
• 必須使用高速 HDMI 電纜才能正確輸出 3D 訊號。
• 觀看 3D 影像時,請在距離電視 3 倍於螢幕寬度
的地方觀看。例如,如果您擁有 46 英吋螢幕,
請在離螢幕 138 英吋(11.5 英呎)處觀看。
• 請將 3D 視訊螢幕放在與眼睛同高的位置,以
取得最佳的 3D 畫面。
• 如果將播放機連接到一些 3D 裝置,3D 效果可
能無法正常起作用。
• 本播放機不會 2D 內容轉換為 3D。
• "Blu-ray 3D" 和 "Blu-ray 3D" 標誌是 Blu-ray
Disc Association 的商標。
繁體中文
2015-02-04 오후 3:16:06
內容
安全資訊
設定
2
警告
16
初始設定程序
4
預防措施
16
首頁畫面
17
存取設定畫面
4
5
重要安全說明
使用 3D 功能
17
18
入門指南
9
前面板
9
後面板
10
遙控器
10
遙控器功能描述
18
圖像
19
音效
20
網絡
20
Smart Hub
20
系統
22
支援
22
22
25
連接
11
連接到電視
12
連接到音頻系統
25
12
方法 1 連接至支援傳遞的 HDMI 相容 AV
接收器
13
方法 2 連接至不支援傳遞的 HDMI 相容
AV 接收器
14
方法 3 連接至音頻系統 (7.1 聲道擴音機)
14
方法 4 使用數碼光纖電纜連接至 AV 接收
器
15
遙控器上用於設定功能表的按鈕
設定功能表功能
網絡和互聯網
配置網絡連線
Wi-Fi Direct
升級軟件
26
立刻更新
26
自動更新
連接到網絡路由器
15
有線網絡
15
無線網絡
6
[BD-J7500-ZK]AK68-02613V-00HK-.indd 6
繁體中文
2015-02-04 오후 3:16:07
媒體播放
28
28
播放商業光碟
光碟儲藏和管理
播放相片、視頻和音樂 (多媒體)
39
建立 Samsung 帳戶
40
使用 Samsung APPS 之前
40
使用 Samsung APPS
28
播放儲存在 USB 裝置上的媒體內容
40
29
播放儲存在電腦/移動裝置上的媒體內容
41
啟動應用程式
Samsung APPS 畫面總覽
29
播放含有使用者燒錄內容的光碟
42
Screen Mirroring
31
控制視訊播放
43
使用 Web 瀏覽器
31
遙控器上用於播放視訊的按鈕
43
連結瀏覽和游標瀏覽
31
在播放期間使用設定功能表
43
控制台總覽
33
使用排序依據和選項功能表
45
34
控制音樂播放
使用設定功能表
46
將互聯網服務帳號連結至產品
46
BD-LIVE™
34
遙控器上用於播放音樂的按鈕
34
在播放期間使用選項功能表
35
在檔案畫面上使用排序依據和選項功能表
35
重複音頻 CD 上的曲目
35
隨機播放音頻 CD 上的曲目
47
35
從音頻 CD 建立播放清單
47
附註
36
擷取
49
根據內容類型的解像度
37
37
37
38
播放相片內容
附錄
50
其他資訊
數碼輸出選取
在播放期間使用工具功能表
51
故障排除
使用排序依據和選項功能表
54
光碟與格式相容性
傳送檔案
54
本播放機可以播放的光碟類型和內容
本播放機無法播放的光碟類型
38
複製視訊、音樂或相片
54
38
使用傳送功能
55
55
56
7
[BD-J7500-ZK]AK68-02613V-00HK-.indd 7
內容
28
網絡服務
區域代碼
本播放機可以播放的光碟標誌
支援的格式
59
符合性和相容性聲明
60
複製保護
60
網絡服務免責聲明
61
許可
63
規格
繁體中文
2015-02-04 오후 3:16:07
入門指南
配件
請檢查下面顯示的隨附配件。
SOURCE
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
4
5
7
8
DISC MENU
3
6
9
TITLE MENU
0
SMART
POPUP
HOME
HOME
REPEAT
HUB
APPS
TOOLS
INFO
RETURN
A
SEARCH
PANDORA
EXIT
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
D
FULL
SCREEN
INPUT
用於遙控器的電池(AAA 號)
遙控器
使用手冊
HDMI 纜線將
8
[BD-J7500-ZK]AK68-02613V-00HK-.indd 8
繁體中文
2015-02-04 오후 3:16:08
前面板
02
電源按鈕
播放/暫停按鈕
入門指南
停止按鈕
打開/關閉按鈕
光碟托盤
顯示
USB HOST
遙控器感應器
||附註 |
\\ 若要透過 USB HOST 插孔升級產品的軟件,必須使用 USB 記憶棒。
\\ 當產品顯示 Blu-ray 光碟功能表時,您不能透過按產品或遙控器上的「播放」按鈕來開始播放電影。要播放電影,必須
在光碟功能表中選取「播放電影」或「開始」,然後按遙控器上的 v 按鈕。
\\ 若要使用 Anynet+ (HDMI-CEC) 功能,請將 HDMI 電纜連接至 HDMI 1 端子。
連接 HDMI 2 端子時,Anynet+ (HDMI-CEC) 功能將無法使用。
後面板
HDMI OUT
HDMI 1 輸出音頻和視訊
HDMI 2 僅輸出音頻
7.1CH ANALOG AUDIO OUT
9
[BD-J7500-ZK]AK68-02613V-00HK-.indd 9
LAN
DIGITAL AUDIO OUT
繁體中文
2015-02-04 오후 3:16:09
入門指南
遙控器
遙控器功能描述
設定之後,可讓您在電視上設定輸入來源。
(此按鈕僅可在 Samsung 電視上使用。)
SOURCE
打開和關閉播放機。
按下以打開和關閉光碟托盤。
按數字按鈕以操作選項。
使用此按鈕以進入光碟功能表。
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
3
4
5
6
7
8
DISC MENU
0
POPUP
使用此按鈕以進入快顯功能表/標題功能表。
按此按鈕以向後或向前搜尋。
按此按鈕以暫停光碟。
按此按鈕以停止光碟。
按此按鈕以移至主功能表。
調節電視音量。
(此按鈕僅可在 Samsung 電視上使用。)
9
TITLE MENU
按此按鈕以向後或向前跳過。
按下以使用「應用程式」。
開啟和關閉電視。
(此按鈕僅可在 Samsung 電視上使用。)
SMART
HOME
HOME
REPEAT
HUB
APPS
TOOLS
INFO
按此按鈕以播放光碟。
允許您重複播放某一標題,章節,曲目或
光碟。
使用此按鈕以顯示播放資訊。
按此按鈕以使用 Tools 功能表。
使用此按鈕以選取功能表項目和變更功能
表值。
返回前一個功能表。
這些按鈕同時用於播放機的功能表和多個
Blu-ray 光碟功能。
按下以搜尋內容。
RETURN
A
SEARCH
PANDORA
EXIT
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
按此按鈕以結束功能表。
D
FULL
SCREEN
INPUT
使用此按鈕存取光碟上的各種音頻功能。
按下以使用全螢幕功能。
在 Blu-ray 光碟/DVD 播放期間,此按鈕不
起作用。
按此按鈕以切換 Blu-ray 光碟/DVD 的字幕
語言。
安裝電池
||附註 |
\\ 如果遙控器不能正常工作:
-- 請檢查電池的極性 +/– 是否安裝正確。
-- 請檢查電池是否耗盡。
-- 請檢查遙控器感應器是否被異物阻擋。
-- 請檢查產品附近是否有熒光干擾。
||注意 |
\\ 請按照當地的環境法規處理電池。不要將它們與家庭垃
圾放在一起。
10
[BD-J7500-ZK]AK68-02613V-00HK-.indd 10
繁體中文
2015-02-04 오후 3:16:10
連接
連接到電視
03
將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到電視的 HDMI IN 插孔。
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
連接
音頻
視訊
||附註 |
\\ 若要使用 Anynet+ (HDMI-CEC) 功能,請將 HDMI 電纜連接至 HDMI 1 端子。
如果您將電纜連接至 HDMI 2 端子,Anynet+ (HDMI-CEC) 功能將無法使用。
-- HDMI 2 端子不會輸出視訊訊號。
\\ 如果使用 HDMI 至 DVI 電纜來連接到顯示裝置,則您還必須將產品上的 DIGITAL AUDIO OUT 連接至音頻系統才能聽到音頻。
\\ HDMI 電纜輸出數碼視訊和音頻,因此不需要連接音頻電纜。
\\ 視您的電視而定,某些 HDMI 輸出解析度可能不起作用。請參閱電視的使用手冊。
\\ 當使用 HDMI 電纜將產品連接至電視或新電視,然後第一次開啟電視時,播放機會自動將 HDMI 輸出解析度設定為電
視支援的最高解析度。
\\ HDMI 電纜很長可能會導致螢幕雜訊。如果出現這種情況,請將 HDMI 深色設定為關閉。
\\ 若要以 HDMI 720p、1080i、1080p 或 2160p 輸出模式觀看視訊,則必須使用高速 (類別 2) HDMI 電纜。
\\ HDMI 僅將純數碼訊號輸出到電視。
如果電視不支援 HDCP (高頻寬數碼內容保護),畫面上將出現雪花噪訊。
11
[BD-J7500-ZK]AK68-02613V-00HK-.indd 11
繁體中文
2015-02-04 오후 3:16:11
連接
連接到音頻系統
可以使用下面說明的方法,將本產品連接至音頻系統。
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
方法 1 連接至支援傳遞的 HDMI 相容 AV 接收器
• 將 HDMI 電纜從產品背面的 HDMI OUT 1 插孔連接到電視的 HDMI IN 插孔。將另一根 HDMI 電纜
從接收器的 HDMI OUT 插孔連接到電視的 HDMI IN 插孔。
• 最佳品質 (建議)
-- 您的接收器必須具有 UHD 傳遞功能才能傳遞 UHD 視訊內容。
音頻/視訊
與 HDMI 相容的
AV 接收器
視訊
12
[BD-J7500-ZK]AK68-02613V-00HK-.indd 12
繁體中文
2015-02-04 오후 3:16:12
方法 2 連接至不支援傳遞的 HDMI 相容 AV 接收器
連接
音頻
03
• 將 HDMI 電纜從產品背面的 HDMI OUT 1 插孔連接到電視的 HDMI IN 插孔。將另一根 HDMI 電纜
從產品背面的 HDMI OUT 2 插孔連接到接收器上的 HDMI IN 插孔。
• 最佳品質 (建議)
視訊
AV 接收器
||注意 |
\\ 不要使用 HDMI 電纜連接產品的 HDMI OUT 1 和 HDMI OUT 2 端子。
13
[BD-J7500-ZK]AK68-02613V-00HK-.indd 13
繁體中文
2015-02-04 오후 3:16:12
連接
方法 3 連接至音頻系統 (7.1 聲道擴音機)
• 使用 7.1 聲道音頻電纜 (未隨附),將播放機背面的 7.1CH ANALOG AUDIO OUT 端子連接至擴音機
的 7.1CH ANALOG AUDIO IN 端子。
• 較佳品質
方法 4 使用數碼光纖電纜連接至 AV 接收器
• 使用數碼光纖電纜 (未隨附) 將產品上的 OPTICAL DIGITAL AUDIO OUT 插孔連接至接收器的
DIGITAL OPTICAL IN 插孔。
• 一般品質
• 當數碼輸出設為 PCM 時,僅可從前面揚聲器聽到聲音。
音頻
7.1 聲道擴音機
方法 3
方法 4
||附註 |
: SURROUND
\\ 必須連接播放機上的前左和前右輸出與SURR.SURROUND
7.1BACK 聲道擴音機才能聽到某些 Blu-ray 光碟的光碟功能表音頻。
\\ 連接至 5.1 聲道家庭影院或接收器時,請連接播放機中除左後環繞聲和右後環繞聲以外的所有類比音頻輸出插孔。
\\ 如果您將接收器連接至播放器的 OPTICAL DIGITAL AUDIO OUT 連接埠,則接收器的音頻重現可能與電視的音頻不同步。
14
[BD-J7500-ZK]AK68-02613V-00HK-.indd 14
繁體中文
2015-02-04 오후 3:16:13
連接到網絡路由器
無線網絡
03
您可以使用下面說明的其中一種方法,將本播放
機連接到網絡路由器。
要使用 DLNA 網絡功能,您必須將 PC 連接至網
絡,如下圖所示。
可以採用有線或無線連接。
連接
有線網絡
無線路由器
寬頻服務
寬頻數據機
(含有整合式路由器)
寬頻服務
或
||附註 |
\\ 如果無線路由器支援 DHCP,則本播放機可以使用
DHCP 或靜態 IP 位址連接到無線網絡。
\\ 將無線路由器設定為「基礎結構」模式。不支援點對點
傳輸模式。
\\ 播放機只支援下列無線安全金鑰通訊協定:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
路由器
寬頻服務
\\ 選取無線路由器上目前未在使用中的通道。如果附近的
另一個裝置目前正在使用為無線路由器設定的通道,則
這會導致干擾和通訊失敗。
\\ 如果選取純高通 (Greenfield) 802.11n 模式且在路由
器上將「加密類型」設定為 WEP,TKIP 或 TKIP-AES
(WPS2Mixed),則播放機將不支援符合新的 Wi-Fi 認證
規範的連線。
寬頻數據機
||附註 |
\\ 路由器或互聯網服務提供商的原則可能阻止播放機存取
Samsung 的軟件更新伺服器。 如果出現這種情況,請
與互聯網服務提供商 (ISP) 聯絡以取得更多資訊。
\\ 由於本質原因,無線 LAN 會導致干擾,具體視操作條
件而定(路由器效能,距離,阻擋物,其他無線電裝置
干擾等等)。
\\ 對於 DSL 使用者,請使用路由器建立網絡連線。
15
[BD-J7500-ZK]AK68-02613V-00HK-.indd 15
繁體中文
2015-02-04 오후 3:16:14
設定
初始設定程序
首頁畫面
• 如果未配置初始設定,則首頁功能表不會出現。
• 升級軟件版本後,本產品中的 OSD (螢幕顯示) 可
能會變更。
• 存取步驟可能會因選定的功能表而異。
在將產品連接至電視之後,開啟電視和產品。第
一次開啟產品時,產品的「初始設定」畫面會出
現在電視上。「初始設定」程序可讓您設定螢
幕顯示 (OSD) 和功能表語言、畫面比例 (螢幕尺
寸)、網絡設定以及將產品連接至互聯網。請依照
畫面上的指示操作。
初始設定完成後,說明如何使用首頁功能表的教
學課程螢幕將會出現。若要退出此畫面,請按遙
控器上的 EXIT 按鈕。
||附註 |
\\ 如果您在「初始設定」程序期間跳過網絡設定,則可以
在以後配置網絡設定。如需說明,請參閱第 22~25 頁
上的「配置網絡連線」。
\\ 如果要再次顯示「初始設定」畫面並進行變更,請在
首頁畫面中選取 設定 > 系統 > 設置,或者選取重設選
項。(請參閱第 22 頁)
\\ 如果您要使用 Anynet+(HDMI-CEC) 功能,請依照下
面的說明操作。
1) 使用 HDMI 纜線將產品連接到符合
Anynet+(HDMI-CEC) 規範的 Samsung 電視。
2) 在電視和產品上將 Anynet+(HDMI-CEC) 功能設定
為開啟。
3) 將電視設定為「初始設定程序」。
16
[BD-J7500-ZK]AK68-02613V-00HK-.indd 16
3 4 5
1
6
2
播放光碟
多媒體
SAMSUNG APPS
沒有光碟
推薦
我的 APP
1
2
7
3
WebBrowser
2
8
3
Screen Mirroring
設定
9
0
1
播放光碟:可讓您播放光碟中的相片、視訊或
音樂內容。
2
多媒體:可讓您播放 USB、移動裝置或電腦中
的相片、視訊或音樂內容。
3
登入:可讓您登入您的 Samsung 帳號。
4
搜尋:可讓您透過輸入相應的搜尋詞語,在應
用程式和 YouTube 中搜尋內容。
5
說明:說明如何使用首頁功能表的教學課程螢
幕將會出現。
6
SAMSUNG APPS:可讓您存取可下載的各種
應用程式。
7
推薦:可讓您直接存取建議的應用程式。
8
我的 APP:將會顯示從我的 APP 中下載的應
用程式。
9
Screen Mirroring:可讓您在連接至本產品的
電視上,觀看智慧型手機或 Android 平板電腦
的畫面。
0
設定:開啟產品的功能表。在功能表中,您可
以設定各種功能以滿足您的個人偏好。
繁體中文
2015-02-04 오후 3:16:15
SOURCE
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
3
4
5
6
7
8
DISC MENU
||附註 |
圖像
圖像
自動
RETURN
系統
解像度
自動
支援
電影幀幅 (24Fps)
自動
DVD 24Fps 轉換
關閉
2. 若要在設定畫面上存取功能表、子功能表和
選項,請參閱下一欄中的遙控器圖示。
17
4
EXIT
B
C
AUDIO SUBTITLE
D
FULL
PANDORA DIGITAL SUBTITLE SCREEN
INPUT
HOME 按鈕:按下可移至首頁畫面。
2
RETURN 按鈕:按下可回到上一個功能表。
3
v (確認)/方向按鈕:
• 按 ▲▼◄► 可移動游標或選取項目。
• 按 v 按鈕可啟動目前選取的項目或確認設
定。
4
EXIT 按鈕:按下可退出當前的功能表。
16:9 原始大小
關閉
INFO
1
3D 設定
BD Wise
設定
2
A
[BD-J7500-ZK]AK68-02613V-00HK-.indd 17
APPS
3
SEARCH
電視外觀比例
REPEAT
HUB
設定
UHD 輸出
HOME
HOME
04
SMART
TOOLS
1. 在首頁畫面上選取設定,然後按 v 按鈕。
設定畫面將會出現。
Smart Hub
POPUP
1
存取設定畫面
網絡
0
遙控器上用於設定功能表的按鈕
\\ 如果讓產品停留在停止模式超過 5 分鐘沒有使
用,屏幕保護程序將出現在電視上。如果產品停
留在屏幕保護程序模式超過 20 分鐘,電源會自
動關閉。
音效
9
TITLE MENU
詳細的功能資訊
畫面上詳細說明了每個「設定」功能、功能表項
目和個別選項。若要檢視說明,請使用 ▲▼◄►
按鈕選取功能、功能表項目或選項。說明一般出
現在畫面右側。
下一頁起提供每個「設定」功能的簡短說明。本
手冊的「附錄」中也提供部分功能的其他資訊。
繁體中文
2015-02-04 오후 3:16:16
設定
設定功能表功能
數字表示每幀的視訊行數。
i 和 p 分別表示逐行和隔行掃描。通常是行數越
高,品質越高。
圖像
電影幀幅 (24Fps)
UHD 輸出
此選項可採用 UHD (Ultra High Definition,超
清) 解析度輸出 HDMI 視訊。僅當電影幀幅設為
自動時,此選項才可用。
||附註 |
\\ 若要使用此功能,您必須將產品連接至支援 UHD 解
析度的裝置,並且您必須具有以 24 fps (拍片速度)
播放的連線。
\\ 本裝置不能播放 UHD 內容。不過,它可以將低於全
HD 的內容解析度提升為 UHD。
\\ 選取 UHD 輸出時,只有 2160 x 3840、每秒 24 幀
輸出可用。
3D 設定
選取是否以 3D 模式播放含有 3D 內容的 Blu-ray
光碟。
如果您在 3D 模式下移至首頁畫面或
SAMSUNG APPS 畫面,則產品將自動切換至
2D 模式。
如果將產品連接到與 24 fps 相容的電視,則將電
影幀幅 (24Fps) 功能設定為自動可讓產品自動將
其 HDMI 輸出調整為每秒 24 幀以改善畫質。
• 只能在支援此幀率的電視上享受電影幀幅
(24Fps) 功能。
• 僅當產品處於 HDMI 1080i 或 1080p 輸出解析
度模式時,才能使用電影幀幅。
DVD 24Fps 轉換
將 DVD 播放轉換成每秒 24 幀並透過 HDMI 輸
出。僅當電影幀幅 (24Fps) 設為開啟時,此選項
才可用。
||附註 |
\\ 此功能僅適用於 NTSC 光碟。
適合螢幕尺寸
將螢幕設定為最佳尺寸。(僅適用於 Smart Hub
和 Screen Mirroring)
HDMI 色彩格式
電視外觀比例
可讓您將產品的輸出調整為電視的螢幕大小和格式。
BD Wise
可讓您設定 HDMI 輸出的色彩空間格式,以與所
連接裝置 (電視,顯示器等) 的功能相符。選取格
式之後,螢幕會暫時變黑。
BD Wise 是 Samsung 最新的內部連接功能。
透過 HDMI 將 Samsung 產品和具有 BD Wise 功
能的 Samsung 電視互連,並且產品和電視上的
BD Wise 均開啟時,產品會以 Blu-ray 光碟/DVD
的視訊解析度和幀速率輸出視訊。
HDMI 深色技術
解像度
可讓您改善觀賞 DVD 時的畫面品質。
可讓您將產品設定為以深色輸出 HDMI 視訊。深
色以更高的色彩深度提供更準確的色彩重現。
漸進模式
將 HDMI 視訊訊號的輸出解析度設定為 BD Wise、
自動、1080p、1080i、720p 或 576p/480p。
18
[BD-J7500-ZK]AK68-02613V-00HK-.indd 18
繁體中文
2015-02-04 오후 3:16:16
音效
動態範圍控制
||附註 |
\\ 若要使用此功能,至少必須連接一個 Multiroom
Link 揚聲器。
\\ 音質可能受到無線網絡狀況的影響。
縮混模式
\\ 如果時間一久,網絡環境品質下降,網絡連線可能
受到負面影響,甚至中斷。
可讓您選取與您的立體聲系統相容的多聲道縮混
方法。
您可以選擇將產品縮混成普通立體聲或兼容環繞
音的立體聲。
\\ 啟用 Screen Mirroring 會停用 Multiroom Link。
\\ 如需相關詳細資料,請參閱 Samsung 網站上的
Multiroom Link 手冊。www.samsung.com ;
; 搜尋產品名稱:BD-J7500 ; 手冊
; Multiroom Link ; 下載 PDF
\\ 來自每個已連接裝置的音訊可能會落後於播放來源
內容之裝置的視訊和音訊。
數碼輸出
可讓您選取適合您的電視或 AV 接收器的數碼音
頻輸出格式。如需更多詳細資料,請參閱第 50 頁
上的數碼輸出選取表格。
PCM 向下採樣
可讓您選擇讓 96kHz PCM 訊號向下採樣為
48kHz,然後再將它們輸出到擴音機。如果擴音
機或接收器與 96kHz 訊號不相容,請選擇開啟。
19
[BD-J7500-ZK]AK68-02613V-00HK-.indd 19
設定
您可以將此產品配置為無線連接至與 Multiroom
Link 相容的揚聲器並享受豐富的聲音。
設定:您可以調節音量以及已連接產品的距
離。
揚聲器設定:您可以設定透過家庭網絡連接的
揚聲器。
可讓您將動態範圍控制套用至 Dolby Digital、
Dolby Digital Plus 和 Dolby TrueHD 音頻。
自動:根據 Dolby TrueHD 聲道中的資訊,自
動控制 Dolby TrueHD 音頻的動態範圍。對於
Dolby Digital 和 Dolby Digital Plus,還會開
啟動態範圍控制。
關閉:保持不壓縮動態範圍,以讓您聽到原始
聲音。
開啟:對於所有三種 Dolby 格式,開啟動態範
圍控制。讓較安靜的聲音大聲一些,並降低較
大聲音的音量。
04
揚聲器設定
DTS Neo:6 模式
透過 HDMI 輸出,可以用多聲道聲音聆聽 2 聲道
音頻來源。
音頻同步
在某些情況下,將產品連接至數碼電視時,音頻
訊號可能會與視頻訊號不同步。如果發生這種情
況,請調整音頻延遲時間以與視頻訊號相配。
• 可以在 0 ms 與 250 ms 之間設定音頻延遲時
間。請將它設為最佳設定。
||附註 |
\\ 您指定的音頻延遲時間可能不完全相同,具體視播
放的內容而定。
繁體中文
2015-02-04 오후 3:16:16
設定
HDMI 音頻輸出
BD-Live 設定
將 HDMI 音頻設定為透過 HDMI1 或 HDMI2 輸
出。
自動:根據連接至 HDMI1 和 HDMI2 的裝置,
自動設定音頻輸出。
HDMI1:音頻將輸出到連接至 HDMI1 的裝置。
HDMI2:音頻將輸出到連接至 HDMI2 的裝置。
設定各種 BD-Live 功能。如果您連接至互聯網,
則 BD-Live 可讓您存取在一些 Blu-ray 光碟上提
供的額外功能。
BD-Live 互聯網連線:可讓您完全容許、部分
容許或禁止 BD-Live 互聯網連線。
BD 資料管理:管理從 BD-Live 服務或 Blu-ray
光碟下載的 BD 資料。
Smart Hub
網絡
條款與政策
網絡狀態
可讓您檢查目前的網絡和互聯網狀態。
您必須檢閱檢並同意應用程式條款與條件及隱私
權政策才能使用應用程式服務。
網絡設定
重設 Smart Hub
配置網絡連線,以便您可以享受各種功能 (例如互
聯網服務或 DLNA 功能) 以及執行軟件升級。
將所有 Smart Hub 設定重設為其預設設定。若要
使用,您必須輸入安全 PIN。
Wi-Fi Direct
可讓您使用對等網絡將 Wi-Fi Direct 裝置連接至
產品,不需要無線路由器。
請注意,如果產品連接至無線網絡,則在您使用
Wi-Fi Direct 時,它可能會中斷連線。
||附註 |
\\ 使用 Wi-Fi Direct 功能時,文字檔案 (例如副檔名為
.TXT 或 .DOC 的檔案) 不會顯示出來。
多媒體裝置設定
可讓您控制網絡上的哪些裝置 (例如智慧型手機和
平板電腦) 可以與產品共用內容。
系統
設置
可讓您重新執行「初始設定」程序。
快速啟動
可讓您將產品設定為透過縮短啟動時間而快速開
啟。
||附註 |
\\ 如果將此功能設定為開啟,待機電源消耗將會提高。
設備名稱
可讓您輸入產品的名稱,以在您的網絡上識別該
產品。
20
[BD-J7500-ZK]AK68-02613V-00HK-.indd 20
繁體中文
2015-02-04 오후 3:16:16
您可以選取螢幕功能表、光碟功能表、音頻、字
幕等等的偏好語言。
• 您光碟功能表、光碟音頻或字幕選取的語言僅
在受支援時才會出現在光碟上。
預設安全 PIN 是 0000。如果您尚未建立您的專
屬 PIN,請輸入預設 PIN 來存取安全功能。第一
次存取安全功能之後,可以使用更改密碼功能來
變更 PIN。
BD 家長分級控制:除非您輸入 PIN,否則禁
止播放分級等於或高於特定年齡分級的 Blu-ray
光碟。
DVD 家長分級控制:除非輸入 PIN,否則禁止
播放分級高於所選取特定數字分級的 DVD。
更改密碼:變更用於存取安全功能的 4 位數
PIN。
裝置管理員
您可以將無線 USB 鍵盤或滑鼠連接至產品前面的
USB 埠。
鍵盤設定:可讓您配置連接至產品的無線 USB
鍵盤。
||附註 |
\\ 僅當 QWERTY 鍵盤畫面或視窗出現在 Web 瀏覽器
中時,才能使用鍵盤。
滑鼠設定:可讓您配置連接至產品的無線 USB
滑鼠。您可以如在電腦上使用滑鼠那樣,在產
品的功能表和 Web 瀏覽器中使用滑鼠。
`` 將滑鼠與產品的功能表搭配使用:
1. 將 USB 滑鼠連接至產品。
`` 如果您忘記 PIN:
1. 移除任何光碟或 USB 儲存裝置。
2. 按住頂端面板上的 @ 按鈕超過 5 秒鐘。
起始設定訊息將出現在畫面上,且會自動
關閉電源。
再次開啟產品時,將會重設所有設定。
一般
2. 按一下您在滑鼠設定中選取的主要按鈕。
「簡式功能表」將會出現。
3. 按一下所需的功能表選項。
您可以變更下面列出的選項以符合您的偏好。
前方顯示:變更前面板的亮度。
時區:選取您居所的時區。
菜單透明度:可讓您調整功能表框的透明度。
\\ 一些 USB HID 鍵盤和滑鼠可能與本產品不相容。
Anynet+(HDMI-CEC)
\\ 一些 HID 鍵盤按鍵可能無法工作。
Anynet+ 是一種方便功能,它提供與其他帶有
Anynet+ 功能的 Samsung 產品的連結操作,並
可讓您使用一個 Samsung 電視遙控器控制那些
產品。若要操作此功能,必須使用 HDMI 電纜將
本產品連接到 Anynet+ Samsung 電視。
||附註 |
\\ 不支援有線 USB 鍵盤。 \\ 可能不支援某些應用程式。
\\ 如果無線 HID 鍵盤由於受干擾而不工作,請將鍵盤
移近一些產品。
21
[BD-J7500-ZK]AK68-02613V-00HK-.indd 21
設定
安全性
04
語言
繁體中文
2015-02-04 오후 3:16:17
設定
網絡和互聯網
DivX® VOD
檢視 ® VOD 註冊代碼以購買和播放 DivX® VOD
內容。
支援
當將本產品連接至網絡時,可以使用網絡型應用
程式和功能 (例如 Smart Hub 和 BD-LIVE),並
可以透過網絡連線升級產品的軟件。如需存取和
使用互聯網服務的相關資訊,請參閱本手冊第
39~46 頁上的「網絡服務」章節。下面開始配置
網絡連線的說明。
遠端管理
配置網絡連線
如果啟動此功能,則可讓 Samsung 呼叫中心工
程師診斷和解決播放機的問題。需要作用中的互
聯網連線。
在開始之前,請與您的 ISP 聯絡以瞭解您的 IP 地
址是靜態的還是動態的。如果是動態的,並且您
使用的是有線或無線網絡,則建議使用下面說明
的自動程序。
如果您要連接到有線網絡,請先使用 LAN 電纜將
產品連接到路由器,再開始配置程序。
如果您要連接到無線網絡,請先中斷所有有線網
絡連線再開始。
若要開始配置網絡連線,請依照下面的步驟操作:
||附註 |
\\ 「遠端管理」服務在某些國家/地區可能無法使用。
\\ 使用遠端管理:
1) 致電 Samsung 聯絡中心,申請遠端支援。
2) 在電視上開啟播放機的功能表並轉至「支援」區
段。
3) 選取遠端管理,然後閱讀並同意服務合約。當
PIN 畫面出現時,將 PIN 碼提供給客服。
4) 客服便可存取您的播放機。
軟件更新
此功能表可讓您升級產品的軟件以取得效能提高
或其他服務。
聯絡 Samsung
有線網絡
ĞĞ
有線 - 自動
1. 在首頁畫面中,選取設定,然後按 v 按
鈕。
2. 選取網絡,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在網絡設定畫面中選取有線,然後按 v 按
鈕。
5. 選取連接按鈕,然後按 v 按鈕。產品會偵
測有線連線,驗證網絡連線,然後連接至網
絡。
提供聯絡資訊以協助您使用產品。
重設
將除網絡和 Smart Hub 設定之外的所有設定重設
為預設值,然後啟動設定功能。若要使用,您必
須輸入安全 PIN。預設安全 PIN 是 0000。
22
[BD-J7500-ZK]AK68-02613V-00HK-.indd 22
繁體中文
2015-02-04 오후 3:16:17
ĞĞ
無線網絡
有線 - 手動
2. 在畫面底部中選取 IP 設定,然後按 v 按
鈕。
IP 設定畫面將會出現。
3. 選取 IP 設定欄位,然後按 v 按鈕。
ĞĞ
4. 在 IP 設定欄位中選取手動輸入,然後按 v
按鈕。
5. 選取要輸入的參數 (例如,IP地址),然後按
v 按鈕。
使用遙控器上的數字小鍵盤為參數輸入數
字。您也可以使用 ▲▼ 按鈕來輸入數字。使
用遙控器上的 ◄► 按鈕從參數內的一個輸
入欄位移至另一個輸入欄位。完成一個參數
後,按 v 按鈕。
6. 按 ▲ 或 ▼ 按鈕移至另一個參數,然依照步
驟 5 中的說明為該參數輸入數字。
7. 重複步驟 5 和 6,直到填寫了所有參數為
止。
設定
1. 選取網絡狀態。產品會搜尋網絡,然後顯示
連線失敗訊息。
您可以採用四種方式設定無線網絡連線:
-- 無線自動
-- 無線手動
-- WPS(PBC)
-- WPS 密碼
當您配置無線網絡連線時,目前透過產品連接的
所有無線網絡裝置或者 (如果適用) 產品目前的有
線連線將會中斷。
04
如果您具有靜態 IP 位址或「自動」程序不起作
用,則您將需要手動設定網絡設定值。
依照「有線 - 自動」中的步驟 1 和 2 操作,然後
依照下面的步驟操作:
無線 - 自動
1. 在首頁畫面中,選取設定,然後按 v 按
鈕。
2. 選取網絡,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在網絡設定畫面中選取無線,然後按 v 按
鈕。產品會搜尋然後顯示可用的網絡清單。
網絡設定
選擇您的網絡類型。
網絡類型
無線
無線網絡
||附註 |
您可以將Blu-ray 播放機連
接到互聯網。 請選取要使用
的無線網絡。
iptime23
iptime
\\ 可向互聯網提供商索要網絡參數。
solugen_edu#2
8. 完成輸入所有參數之後,選取確定,然後按
v 按鈕。產品會驗證網絡連線,然後連接
至網絡。
重新
WPS(PBC)
5. 選取所需的網絡,然後按 v 按鈕。
6. 在「安全」畫面上,輸入網絡的「安全代
碼」或「通行碼」。
使用遙控器上的數字按鈕直接輸入數字。使
用箭頭按鈕選取字母,然後按 v 按鈕,這
樣來輸入字母。
23
[BD-J7500-ZK]AK68-02613V-00HK-.indd 23
繁體中文
2015-02-04 오후 3:16:17
設定
||附註 |
\\ 若要在輸入密碼時檢視密碼,請使用箭頭按鈕選取右側
的顯示密碼,然後按 v 按鈕。
7. 完成後,選取完成,然後按 v 按鈕。產品
會驗證網絡連線,然後連接至網絡。
8. 驗證完成後,選取確定,然後按 v 按鈕。
||附註 |
\\ 應該可以在用來設定路由器或數據機的設定畫面上找到
「安全代碼」或「通行碼」。
ĞĞ
無線 - 手動
如果您具有靜態 IP 位址或「自動」程序不起作
用,則您將需要手動設定網絡設定值。
1. 依照「無線 - 自動」中直到步驟 5 的指示操
作。
2. 產品會搜尋網絡,然後顯示連線失敗訊息。
3. 在畫面底部中選取 IP 設定,然後按 v 按
鈕。
IP 設定畫面將會出現。
4. 選取 IP 設定欄位,然後按 v 按鈕。
5. 在 IP 設定欄位中選取手動輸入,然後按 v
按鈕。
6. 選取要輸入的參數 (例如,IP地址),然後按
v 按鈕。使用遙控器上的數字小鍵盤為參
數輸入數字。您也可以使用 ▲▼ 按鈕來輸入
數字。使用遙控器上的 ◄► 按鈕從參數內的
一個輸入欄位移至另一個輸入欄位。完成一
個參數後,按 v 按鈕。
7. 按 ▲ 或 ▼ 按鈕移至另一個參數,然依照步
驟 6 中的說明為該參數輸入數字。
8. 重複步驟 6 和 7,直到填寫了所有參數為
止。
24
[BD-J7500-ZK]AK68-02613V-00HK-.indd 24
||附註 |
\\ 可向互聯網提供商索要網絡參數。
9. 完成後,選取確定,然後按 v 按鈕。「安
全性」畫面將會出現。
10. 在「安全性」畫面上,輸入網絡的「安全
碼」或「通行碼」。使用遙控器上的數字按
鈕直接輸入數字。使用 ▲▼◄► 按鈕選取字
母,然後按 v 按鈕,這樣來輸入字母。
11. 完成後,選取畫面右側的完成,然後按 v
按鈕。
產品會驗證網絡連線,然後連接至網絡。
12. 產品驗證網絡之後,選取確定,然後按 v
按鈕。
ĞĞ
WPS(PBC)
1. 在首頁畫面中,選取設定,然後按 v 按
鈕。
2. 選取網絡,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在網絡設定畫面中選取無線,然後按 v 按
鈕。
5. 按遙控器上的 ▲ 按鈕,然後按 ► 按鈕選取
WPS(PBC)。
6. 按遙控器上的 v 按鈕。「在接下來 2 分鐘
內,按下無線路由器上的 PBC 按鈕。」訊息
將會出現。
7. 在兩分鐘內按路由器上的 WPS(PBC) 按鈕。
本產品會自動取得它所需的所有網絡設定值並
連接至網絡。
網絡狀態畫面將會出現。
驗證網絡連線之後,產品將連接至網絡。
繁體中文
2015-02-04 오후 3:16:17
ĞĞ
WPS 密碼
2. 選取網絡,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在網絡設定畫面中選取無線,然後按 v 按
鈕。
產品會搜尋然後顯示可用的網絡清單。
5. 選取所需的網絡,然後按 v 按鈕。
6. 選取 WPS 密碼,然後按 v 按鈕。PIN 快
顯視窗將會出現。
7. 在路由器的設定畫面中的 WPS 密碼 輸入欄
位內輸入 PIN,然後儲存該畫面。
||附註 |
\\ 如需如何存取路由器的設定畫面的說明,請與路由器的
製造商聯絡,或者請參閱路由器的使用手冊。
\\ 對於 WPS 連線,請將無線路由器的安全加密方法設定
為 AES。WPS 連線不支援 WEP 安全加密。
Wi-Fi Direct
此功能可讓您使用對等網絡將 Wi-Fi Direct 裝置
連接至產品及相互連接,而不需要無線路由器。
||附註 |
\\ 藍芽傳送可能會干擾 Wi-Fi Direct 訊號。在使用 Wi-Fi
Direct 功能之前,強烈建議您關閉任何作用中移動裝置
上的藍芽功能。
25
[BD-J7500-ZK]AK68-02613V-00HK-.indd 25
2. 在首頁畫面中,選取設定,然後按 v 按
鈕。
3. 選取網絡,然後按 v 按鈕。
4. 選取 Wi-Fi Direct,然後按 v 按鈕。
您可以連接的 Wi-Fi Direct 裝置將會出現。
設定
1. 在首頁畫面中,選取設定,然後按 v 按
鈕。
1. 開啟 Wi-Fi direct 裝置並啟動其 Wi-Fi
Direct 功能。
04
在開始之前,請在電腦上開啟路由器的設定功能
表,並存取畫面上的 WPS 密碼 輸入欄位。
||附註 |
\\ 使用 Wi-Fi Direct 功能時,目前的有線或無線網絡連線
將會中斷。
\\ 使用 Wi-Fi Direct 功能時,文字檔案 (例如副檔名為
.TXT 或 .DOC 的檔案) 不會顯示出來。
升級軟件
此功能表可讓您升級產品的軟件以取得效能提高
或其他服務。
• 在更新過程中,切勿手動關閉或開啟產品。
1. 在首頁畫面中,選取設定,然後按 v 按
鈕。
2. 選取支援,然後按 v 按鈕。
3. 選取軟件更新,然後按 v 按鈕。
4. 若要下載軟件並立即更新,請選取立即更
新,然後按 v 按鈕。
5. 若要讓產品在有更新軟件可用時自動下載更
新軟件,請選取自動更新,然後按 v 按
鈕。如需詳細資料,請參閱第 26 頁上的
「自動更新」。
繁體中文
2015-02-04 오후 3:16:17
設定
||附註 |
自動更新
\\ 產品關閉然後再次自行開啟後,升級即告完成。
\\ 對於在軟件更新期間互聯網連線不穩定或消費者粗心大
意造成的任何產品運作失常,Samsung Electronics 不
承擔法律責任。
\\ 如果您要在正在下載升級軟件時取消升級,請按 v
按鈕。
您可以設定自動更新功能,以便產品在處於「自
動更新」模式時下載新的升級軟件。
這可讓產品在未使用時自動下載更新軟件。
1. 按 ▲▼ 按鈕選取自動更新,然後按 v 按
鈕。
\\ 系統升級正在進行時,會在前面板上顯示 "UPDATE"。
2. 選取開啟或關閉。
立刻更新
\\ 若要使用自動更新功能,必須將本產品連接到互聯網。
您可以使用立刻更新來透過網絡連線或使用 USB
快閃磁碟機更新軟件。網絡說明如下所示。USB
快閃磁碟機說明在下一欄。
1. 選取立刻更新,然後按 v 按鈕。
「立即更新」快顯視窗將會出現。
2. 產品會在線上搜尋最新的軟件版本。
3. 如果它找到新版本,「更新要求」快顯視窗
將會出現。
4. 選取是。產品便會升級軟件,關閉,然後自
動開啟。
5. 如果您未在一分鐘內選取是或否,則產品會
儲存新的升級軟件。您可以使用自動更新以
在日後升級軟件。
6. 如果您選取否,產品便會取消升級。
||附註 |
\\ 系統升級完成後,請在「聯絡 Samsung」畫面的「產
品資訊」區段中檢查軟件詳細資料。
||附註 |
透過 USB 更新
若要使用 USB 來升級,請依照下面的步驟操作:
1. 造訪 www.samsung.com。
2. 按一下頁面右上方的使用者及支援 > 手冊及
下載。
3. 在搜尋欄位中輸入產品的型號。在輸入產品
型號時,一個下拉式清單將會顯示符合該型
號的產品。
4. 在下拉式清單中按一下您的產品型號。
5. 在隨後出現的頁面上,按一下下載。
6. 在「說明」下尋找升級檔案 (USB 類型)。
7. 按一下頁面右側「檔案」直欄中的 ZIP 按
鈕。
8. 在隨後出現的快顯視窗中按一下傳送,以下
載韌體檔案並將它儲存到電腦。
\\ 在軟件更新期間,切勿關閉產品。
否則會導致產品運作失常。
26
[BD-J7500-ZK]AK68-02613V-00HK-.indd 26
繁體中文
2015-02-04 오후 3:16:17
9. 將該 zip 保存檔解壓縮到電腦。應該使用與
zip 檔案同名的單一資料夾。
10. 將該資料夾複製到 USB 快閃磁碟機中。
04
11. 請確保產品中沒有光碟,然後將 USB 快閃磁
碟機插入到產品的 USB 埠中。
設定
12. 在產品的功能表中,轉至設定 > 支援 > 軟件
更新。
13. 選取立刻更新。
14. 產品便會在 USB 磁碟機上搜尋軟件。在它
找到軟件後,「更新要求」快顯視窗將會出
現。
15. 選取是。產品便會升級軟件,關閉,然後自
動開啟。
||附註 |
\\ 使用 USB 插孔來升級軟件時,產品中不應該插入光
碟。
\\ 系統升級完成後,請在「聯絡 Samsung」畫面的「產
品資訊」區段中檢查軟件詳細資料。
\\ 在軟件更新期間,切勿關閉產品。
否則會導致產品運作失常。
\\ 使用 USB 插孔進行軟件更新只能使用 USB 快閃記憶棒
進行。
27
[BD-J7500-ZK]AK68-02613V-00HK-.indd 27
繁體中文
2015-02-04 오후 3:16:17
媒體播放
本 Blu-ray 產品可以播放位於 Blu-ray/DVD/CD
光碟、USB 裝置、電腦、智慧型手機、平板電腦
和網絡上的內容。
若要播放位於電腦或移動裝置上的內容,必須將
電腦或移動裝置與產品連接至網絡。若要播放 PC
上的內容,您必須安裝 DLNA 軟件或已在 PC 上
安裝 DLNA 軟件,並透過網絡將 BD 播放機連接
至 PC。
||附註 |
\\ 執行 Windows 7 與 Windows 8 的電腦已內置 DLNA
軟件 (Play To)。
• 清潔光碟
-- 如果光碟印上指紋或蒙上灰塵,
請用已稀釋的溫和洗滌劑清洗,
然後用柔軟的布料擦。
-- 清潔時,應從光碟的內部向外部
輕柔地擦。
• 光碟儲藏
`` 請勿放在陽光直射處。
`` 請放在陰涼通風處。
`` 請放在乾淨的保護套內且垂直存放。
播放相片、視頻和音樂 (多媒體)
播放商業光碟
您可以在產品上播放儲存在 USB 裝置、智慧型手
機、數碼相機或電腦上的內容。
1. 按 8 按鈕開啟光碟托盤。
2. 輕輕將光碟放入托盤,光碟的標籤朝上。
||附註 |
\\ 如果內容或裝置不受產品支援,則您不能播放媒體內
容。
\\ 在連接 USB 裝置之前,請備份重要檔案。對於
損壞或遺失的檔案,Samsung 不承擔任何責
任。
播放儲存在 USB 裝置上的媒體內容
1. 將 USB 裝置連接至產品。
2. 按 HOME 按鈕並在多媒體面板中選取儲存
空間。將會列出連接至產品的 USB 裝置。
3. 按 8 按鈕關閉光碟托盤。
播放將會自動開始。
4. 如果播放不自動開始,請按遙控器上的 6
按鈕。
光碟儲藏和管理
• 拿光碟
-- 光碟上的指紋或劃痕會降低音質
和畫質,或者導致跳躍。
-- 應避免觸摸已錄製資料的光碟表面。
-- 拿光碟時要拿光碟的邊,以防指紋落在表面
上。
-- 請勿在光碟上粘貼紙片或帶子。
28
[BD-J7500-ZK]AK68-02613V-00HK-.indd 28
3. 選取要連接至的裝置。將會列出所選 USB 中
的資料夾和檔案。
4. 從清單中選取要播放的媒體內容。媒體內容
便會播放。
||附註 |
\\ 或者,選取要播放的媒體類型 (例如視訊),接著選取要
播放的檔案,然後按 6 按鈕以播放內容。
繁體中文
2015-02-04 오후 3:16:19
5. 要退出,請按 5 按鈕或 RETURN 按鈕。
||附註 |
您可以在產品上播放儲存在與產品連接至同一個
網絡中的電腦或移動裝置上的媒體內容。
||附註 |
\\ 僅可與支援 DLNA 功能的 Samsung 手機搭配使用。
\\ 嘗試透過協力廠商 DLNA 伺服器播放媒體檔案時,可能
會發生相容性問題。
\\ 由電腦或移動裝置共用的內容可能無法播放,具體視內
容的編碼類型及檔案格式而定。此外,部分功能可能無
法使用。
\\ 媒體內容可能無法流暢播放,具體視網絡狀態而定。如
果內容無法流暢播放,請使用 USB儲存裝置。
1. 連接智慧型裝置和產品。
2. 按 HOME 按鈕並在多媒體面板中選取網絡
裝置。將會列出與產品連接至同一個網絡的
儲存裝置。
||附註 |
\\ 您可以連接任何 DLNA DMC 裝置上的移動裝置。
DLNA DMC 功能允許使用者將移動裝置連接至產品,
搜尋媒體內容,並控制產品上的播放操作。
1. 導覽至設定 > 網絡並選取多媒體裝置設定。
將會列出與產品連接至同一個網絡的移動裝
置。
2. 允許要連接至產品的所需裝置的連線。您只
能播放已允許至連接至產品的裝置中的媒體
檔案。
||附註 |
\\ 如果移動裝置請求播放媒體內容,連線確認視窗將會出
現在已連接至的產品電視上,以便您可以輕鬆地連接移
動裝置。
播放含有使用者燒錄內容的光碟
3. 選擇所需的儲存裝置。將會列出由所選儲存
裝置共用的資料夾和檔案。
您可以播放在 Blu-ray、DVD 或 CD 光碟上燒錄
的多媒體檔案。
||附註 |
2. 使用 ▲▼ 按鈕選取要觀看或播放的內容類型
(所有、相片、視頻或音樂),然後按 v 按
鈕。
4. 從清單中選取要播放的媒體內容。媒體內容
便會播放。
\\ 或者,選取要播放的媒體類型 (例如視訊),接著選取要
播放的檔案,然後按 6 按鈕以播放內容。
媒體播放
播放儲存在電腦/移動裝置上的媒體內容
(HOME → 設定 → 網絡 → 多媒體裝置設定)
若要播放儲存在移動裝置上的媒體內容,您必須
允許移動裝置與產品之間的連線。
05
\\ 如果您將 USB 裝置連接至產品,快顯視窗將會出現在
畫面,以便您可以輕鬆導覽 USB 裝置的資料夾和檔
案。
允許連接移動裝置
1. 將使用者燒錄的光碟放入光碟托盤中,光碟
的標籤向上,然後關閉托盤。「已連接裝
置」快顯視窗將會出現。
5. 要退出,請按 5 按鈕或 RETURN 按鈕。
29
[BD-J7500-ZK]AK68-02613V-00HK-.indd 29
繁體中文
2015-02-04 오후 3:16:19
媒體播放
||附註 |
\\ 即使產品將顯示所有內容類型的資料夾,但是它僅顯示
您在步驟 2 中選取之內容類型的檔案。例如,如果您選
取了音樂,則您僅可看到音樂檔案。您可以透過回到多
媒體畫面並重複步驟 2 來變更此選項。
3. 列出光碟內容的畫面將會出現。根據內容的
排列方式,您將看到資料夾及/或個別檔案。
4. 必要時,使用 ▲▼◄► 按鈕選取資料夾,然
後按 v 按鈕。
5. 使用 ▲▼◄► 按鈕選取要觀看或播放的檔
案,然後按 v 按鈕。
6. 按 RETURN 按鈕一或多次結束目前畫面、結
束資料夾或返回首頁畫面。
按 EXIT 按鈕可直接返回首頁畫面。
7. 如需如何控制光碟上視訊、音樂和圖片播放
的說明,請轉至第 31~38 頁。
30
[BD-J7500-ZK]AK68-02613V-00HK-.indd 30
繁體中文
2015-02-04 오후 3:16:20
控制視訊播放
SOURCE
1
2
3
4
5
6
7
8
遙控器上用於播放視訊的按鈕
DISC MENU
9
„„
TITLE MENU
0
POPUP
使用光碟功能表、標題功能表、快顯功能表
和標題清單
DISC MENU
按鈕
SMART
HOME
HOME
REPEAT
HUB
„„
APPS
TOOLS
與播放相關的按鈕
INFO
在「搜尋」、「慢動作播放」和「逐個動作播
放」模式下,產品不會播放聲音。
• 要恢復正常速度播放,請按
RETURN
EXIT6 按鈕。
6 按鈕
開始播放。
5 按鈕
SEARCH
7 按鈕
暫停播放。
快動作播放
在播放期間,按 3 或 4 按鈕。
每次按 3 或 4 按鈕,播放速度都
會變更。
慢動作播放
A
B
C
AUDIO SUBTITLE
停止播放。
PANDORA DIGITAL SUBTITLE
D
在播放期間,按此按鈕可顯示光碟功
能表。
在播放期間,按此按鈕可顯示標題功
TITLE MENU 能表。
按鈕
• 如果光碟有播放清單,請按檢視轉
至播放清單。
POPUP
MENU 按鈕
在播放期間,按此按鈕可顯示快顯功
能表。
在播放期間使用設定功能表
FULL
SCREEN
INPUT
在播放期間或處於暫停模式時,按 TOOLS 按
鈕。
使用 ▲▼◄► 按鈕選取 ,然後按 E 按鈕。
從頭播放
在暫停模式中,按 4 按鈕。
每次按 4 按鈕,播放速度都會變
更。
在播放期間,按 1 或 2 按鈕。
每次按 1 或 2 按鈕,光碟都會移
跳過動作播放
至上一個章節/檔案或下一個章節/檔
案。
31
選取此項可回到電影的開頭,然後
按 v 按鈕。
-- 搜尋標題:如果光碟或裝置上有
多部電影,則選取此項可開始不
同的標題。
在暫停模式中,按 7 按鈕。
逐個動作播放 每次按 7 按鈕,都會出現新的一
幀。
[BD-J7500-ZK]AK68-02613V-00HK-.indd 31
媒體播放
VOL
05
VOL
– + VOL
+–
VOL
您可以控制位於光碟、USB、移動裝置或電腦上之視訊內容的播放。視光碟或內容而定,在本手冊中說
SAMSUNG TV
明的一些功能可能無法使用。
1. 選取搜尋標題,然後按 v 按
鈕。
選擇場景
2. 使用 ▲▼ 按鈕選取標題,然後
按 v 按鈕。
||附註 |
\\ 搜尋 DVD 標題時,在停止模式
下,按 INFO 按鈕並輸入所需的標
題編號 (01,02,...)。
繁體中文
2015-02-04 오후 3:16:20
媒體播放
-- 搜尋章節:選取此項可播放所選
擇的章節。
播放 3D 檔案時可以使用 3D 功能
表。
1. 選取搜尋章節,然後按 v 按
鈕。
2. 使用 ▲▼ 按鈕選取章節,然後
按 v 按鈕。
-- 搜尋時間軸:選取此項可從選取
的時間點播放電影。
||附註 |
\\ 3D 功能表僅在播放 3D 視訊檔案
時可用。
3D
1. 選取搜尋時間軸,然後按 v
按鈕。
選擇場景
\\ 如果您在 3D 模式下移至首頁畫面
或 Smart Hub 首頁畫面,則產品
將自動切換至 2D。
2. 使用數字按鈕,輸入要移至的
時間點,然後按 v 按鈕。
||附註 |
\\ 您還可以使用 ◄► 按鈕使電影前
進或到退。每次您按 ◄► 按鈕,
電影就會前進或到退一分鐘。
\\ 如果檔案中的索引資訊損壞,或者
該檔案不支援索引,搜尋標題功能
將無法使用。
\\ 如果您在將播放機連接至網絡上的
電腦之後執行網絡裝置上的檔案,
搜尋標題可能不起作用。
32
[BD-J7500-ZK]AK68-02613V-00HK-.indd 32
\\ 播放 3D 視訊時,請在「3D 設
定」中將播放機設定為「並排」或
「頂端/底端」,以便播放機的設
定與 3D 內容格式相符。
搜尋
-- 搜尋場景:在播放期間,您可以
使用「搜尋場景」功能來檢視所
需場景,或從所需場景開始播放
電影。
-- 搜尋標題:如果光碟或裝置上有
多部電影,則選取此項可開始不
同的標題。
-- 搜尋時間軸:選取此項可從選
取的時間點播放電影。
字幕設定
可讓您設定所需的字幕選項。
重複模式
可讓您重複標題、章節或特定區段。
全螢幕
可讓您設定視訊影像的大小。
繁體中文
2015-02-04 오후 3:16:21
\\ 當使用 BD wise 功能時,此功能
表不會出現。
Multiroom
Link
選取此項可控制音量。
-- 音量:調節音量。按遙控器上的
◄► 按鈕。
-- 靜音:使來自本播放機的聲音靜
音。再按一下則使聲音恢復至上
次的音量。
||附註 |
\\ 僅當您連接至與 Multiroom Link
相容的揚聲器時,此功能表才可
用。
音頻
使用此項可設定所需的音頻語言。
音訊同步
選取此項可調整音頻同步。
字幕
使用此項可設定所需的字幕語言。
角度
可讓您從另一個角度觀看場景。
「角度」選項顯示可供觀看的角度
數。當 Blu-ray 光碟/DVD在一個特
定場景中包含多個角度時,您可以
變更為另一個角度。
資訊
可讓您檢視視訊檔案資訊。
BONUSVIEW
視頻
BONUSVIEW
音頻
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
\\ 位元速率為 20Mbps 或以上的視訊檔案會使產品的功
能疲勞,並且在播放期間,可能會停止播放。
使用排序依據和選項功能表
媒體播放
||附註 |
||附註 |
05
圖像模式
可讓您設定畫面模式。
-- 動態:提高清晰度和亮度。
-- 標準:選取此設定可取得最多觀
賞應用。
-- 電影:最適合觀看電影的設定。
-- 使用者:可讓您分別調整清晰度
和降低雜訊功能。
使用排序依據功能表
在包含視訊檔案的檔案畫面上,選取
v 按鈕。
日期
依日期對介質或儲存裝置上的所有
視訊檔案分組。按一下群組可查看
該群組中的視訊。
標題
依標題顯示介質或儲存裝置上的所
有視訊檔案。
資料夾
按字母數字順序顯示介質或儲存裝
置上的所有資料夾。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
使用選項功能表
在包含視訊檔案的檔案畫面上,選取
v 按鈕。
用於設定所需的 BONUSVIEW 選
項。
[BD-J7500-ZK]AK68-02613V-00HK-.indd 33
,然後按
可讓您選取要播放的特定檔案。對
播放選定的項目 於所有媒體,它的工作方式基本相
同。
傳送
33
,然後按
選取此功能表可將選取的檔案上傳
到網站 (Picasa、Facebook 等) 或
裝置。若要使用此功能表,您需要
在線上網站上建立帳號,然後使用
「登入」功能登入。請參閱第 38
頁上的「使用傳送功能」。
繁體中文
2015-02-04 오후 3:16:36
媒體播放
控制音樂播放
在播放期間使用選項功能表
您可以控制位於光碟、USB、移動裝置或電腦上
之音樂內容的播放。
視光碟或內容而定,在本手冊中說明的一些功能
SOURCE
可能無法使用。
遙控器上用於播放音樂的按鈕
– + VOL
+–
VOL
VOL
1
SAMSUNG TV
1
2
3
4
5
6
7
8
DISC MENU
9
SMART
POPUP
HOME
HOME
REPEAT
HUB
APPS
TOOLS
4
5
6
擷取
此功能會將 CD 音頻轉換成 mp3 格
式,並將轉換的檔案儲存在已連接
至產品的 USB 裝置或移動裝置上。
請參閱第 36 頁上的「擷取」。
資訊
選取此項可查看 (內容) 資訊。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
INFO
1
數字按鈕:按曲目的編號。將會播放選取的曲
目。
2
12 按鈕:移至下一個/上一個曲目。
3
5 按鈕:停止曲目。
4
快速播放 (僅限音頻
CD (CD-DA))
SEARCH AUDIO SUBTITLE
FULL
PANDORA DIGITAL SUBTITLE SCREEN
在播放期間,按
3 或 4INPUT按鈕。
每次按 3 或 4 按鈕,播放速度都會變更。
5
7 按鈕:暫停曲目。
6
6 按鈕:播放當前選取的曲目。
RETURN
A
可讓您透過選取要播放的特定曲目
建立播放清單。對於所有媒體,它
播放選定的項目 的工作方式基本相同。請參閱第
35~36 頁上的「從音頻 CD 建立播
放清單」。
TITLE MENU
0
2
3
VOL
在音樂檔案播放畫面上,使用 ▲▼◄► 按鈕選取
,然後按 v 按鈕。
EXIT
B
C
D
||附註 |
\\ 如果您未在插入音頻 CD 後的 5 秒鐘內按該按鈕,畫面
將以全螢幕模式顯示。
若要返回到「播放清單」畫面,請按遙控器上的
RETURN 按鈕。
34
[BD-J7500-ZK]AK68-02613V-00HK-.indd 34
繁體中文
2015-02-04 오후 3:16:37
重複音頻 CD 上的曲目
使用排序依據功能表
您可以將產品設定為重複音頻 CD (CD-DA/MP3)
上的曲目。
,然後按
曲目
按字母數字順序顯示介質或儲存裝
置上的所有音樂曲目。
專輯
依專輯顯示介質或儲存裝置上的所
有音樂。
1. 在「播放」畫面上,使用 ▲▼◄► 按鈕選取
畫面左下角中的
,然後按 v 按鈕。
2. 使用 ▲▼ 選取所需的重複模式 - 關閉、一首
歌曲或全部 - 然後按 v 按鈕。
TRACK 001
00:43
03:56
TRACK 003
04:41
演出者
依演出者顯示介質或儲存裝置上的
所有音樂。
TRACK 002
TRACK 004
04:02
TRACK 005
03:43
類型
依類型顯示介質或儲存裝置上的所
有音樂。
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
資料夾
TRACK 001
00:00:39 00:02:38
顯示介質或儲存裝置上的所有資料
夾。
媒體播放
在包含音樂檔案的檔案畫面上,選取
v 按鈕。
05
在檔案畫面上使用排序依據和選項功能表
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
隨機播放音頻 CD 上的曲目
使用選項功能表
在包含音樂檔案的檔案畫面上,選取
v 按鈕。
,然後按
您可以將產品設定為隨機播放音頻 CD (CD-DA/
MP3) 上的曲目。
1. 在「播放」畫面上,使用 ▲▼◄► 按鈕選取
畫面左下角中的 ,然後按 v 按鈕。
可讓您選取要播放的特定曲目。對
於所有媒體,它的工作方式基本相
播放選定的項目 同。
請參閱第 35 頁上的「重複音頻 CD
上的曲目」。
2. 使用 ▲▼ 將「隨機播放」模式設定為開啟或
關閉,然後按 v 按鈕。
傳送
選取此項可將選取的檔案傳送到其
他裝置。請參閱第 38 頁上的「使
用傳送功能」。
1. 顯示「播放」畫面時,選取
,然後按 v
按鈕。設定功能表將會出現。
編碼方式
選取此項可管理文字編碼選項。
新增到播放清單 選取此項可建立播放清單。
從音頻 CD 建立播放清單
2. 使用 ▲▼ 按鈕選取播放選定的項目,然後按
v 按鈕。
3. 使用 ▲▼ 按鈕選取曲目,然後按 v 按鈕。
一個勾選標記會出現在曲目左側。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
35
[BD-J7500-ZK]AK68-02613V-00HK-.indd 35
繁體中文
2015-02-04 오후 3:16:38
媒體播放
4. 重複步驟 3 選取並勾選其他曲目。
5. 若要從清單中移除曲目,請移至曲目,然後
再次按 v 按鈕。
便會移除曲目上的勾選標記。
6. 完成後,按 ▲▼ 按鈕選取播放,然後按 v
按鈕。「音樂播放」畫面會重新出現,並
僅列出您勾選的曲目。會自動播放選取的曲
目。
||附註 |
\\ 可以在音頻 CD (CD-DA) 上建立最多含有 99 個曲目的
播放清單。
\\ 在「選擇播放」畫面上,您還可以選擇全選、清除全部
和取消。
-- 使用全選可選取所有曲目。這會取消個別曲目選擇。
按遙控器上的 RETURN 按鈕或選取播放按鈕,然後
按 v 按鈕時,所有曲目都會出現在「音樂播放」
畫面上,並且產品將從曲目 001 開始播放所有曲
目。
-- 使用清除全部可一次性取消選取所有已選取的曲目。
然後,選取個別曲目,或使用全選來選取所有曲目,
然後按遙控器上的 RETURN 按鈕。如果不使用全選
或選取個別曲目,播放清單將保持不變。
-- 取消可取消您在「播放選定的項目」畫面上進行的任
何變更。當返回「播放」畫面時,「播放清單」將保
持不變。
4. 使用 ▲▼ 按鈕選取曲目,然後按 v 按鈕。
一個勾選標記會出現在曲目左側。
5. 重複步驟 4 選取並勾選其他曲目。
6. 若要從清單中移除曲目,請移至曲目,然後
再次按 v 按鈕。
便會移除曲目上的勾選標記。
7. 完成後,使用 ▲▼ 按鈕擷取,然後按 v 按
鈕。擷取快顯視窗將會出現。
8. 使用 ▲▼◄► 按鈕選取要用於儲存所擷取檔
案的裝置,然後按 v 按鈕。
||附註 |
\\ 正在進行擷取時,不要使裝置斷開連接。
9. 如果要取消擷取,請按 v 按鈕,然後選取
是。選取否可繼續擷取。
10. 擷取完成後,「已成功擷取。」訊息將會出
現。按 v 按鈕。
11. 按 RETURN 或選取取消,然後按 v 按鈕可
返回播放畫面。
||附註 |
\\ DTS 音頻 CD 沒有此功能。
\\ 一些光碟可能不支援此功能。
\\ 擷取會將以 192kbps 的速率將音樂編碼為 .mp3 格
式。
\\ 在擷取畫面上,您還可以選擇全選和清除全部。
擷取
1. 將 USB 裝置插入到產品前面的 USB 插孔中。
2. 顯示「播放」畫面時,選取
,然後按 v
按鈕。設定功能表將會出現。
\\ 使用全選選取所有曲目,然後按 v 按鈕。這會取消
個別曲目選擇。
\\ 使用清除全部可一次性取消選取所有已選取的曲目。
3. 使用 ▲▼ 按鈕選取擷取,然後按 v 按鈕。
36
[BD-J7500-ZK]AK68-02613V-00HK-.indd 36
繁體中文
2015-02-04 오후 3:16:38
播放相片內容
在播放期間或處於暫停模式時,按 TOOLS 按
鈕。
使用 ▲▼◄► 按鈕選取 ,然後按 v 按鈕。
選取此項可變更「播放幻燈片」設
定。
-- 速度:選取此項可設定播放幻
投影片放映設定
燈片速度。
-- 效果:選取此項可設定播放幻燈
片效果。
旋轉
選取此項以旋轉圖片。(這會順時針
或逆時針旋轉圖片。)
放大
選取此項以放大目前的圖片。(最多
放大 4 倍)
圖像模式
選取此項可設定畫面模式。
-- 動態:選取此設定以提高清晰
度。
-- 標準:選取此設定可取得最多觀
賞應用。
-- 電影:這是觀看電影的最佳設
定。
-- 使用者:可讓您分別調整清晰度
和降低雜訊功能。
||附註 |
\\ 僅當您連接至與 Multiroom Link
相容的揚聲器時,此功能表才可
用。
傳送
選取此項可將選取的檔案傳送到其
他裝置。
資訊
選取此項可查看 (內容) 資訊。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
\\ 若要啟用背景音樂功能,相片檔案與音樂檔案必
須在相同的儲存媒體中。
請注意,聲音品質可能會受到 MP3 檔案的位元
速率、相片的大小和編碼方法影響。
\\ 在全螢幕模式中,不能放大字幕和 PG 圖形。
使用排序依據和選項功能表
使用排序依據功能表
在包含相片檔案的檔案畫面上,選取
v 按鈕。
,然後按
日期
依日期對介質或儲存裝置上的所有
相片檔案分組。按一下群組可查看
該群組中的相片。
選取此項可在觀看幻燈片時收聽音
樂。
標題
依標題顯示介質或儲存裝置上的所
有相片檔案。
||附註 |
資料夾
顯示介質或儲存裝置上的所有資料
夾。
||附註 |
\\ 當您使用 BD Wise 功能時,不能
顯示此功能表。
背景音樂
Multiroom
Link
\\ 外部裝置中可用的音樂檔案數目會
因裝置而異。
媒體播放
在播放期間使用工具功能表
05
您可以播放位於 DVD、USB、移動裝置或電腦上
的相片內容。
選取此項可控制音量。
-- 音量:調節音量。按遙控器上
的 ◄► 按鈕。
-- 靜音:使來自本播放機的聲音
靜音。再按一下則使聲音恢復
至上次的音量。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
37
[BD-J7500-ZK]AK68-02613V-00HK-.indd 37
繁體中文
2015-02-04 오후 3:16:39
媒體播放
使用傳送功能
使用選項功能表
在包含相片檔案的檔案畫面上,選取
v 按鈕。
幻燈片放映
,然後按
開始幻燈片播放。逐個顯示目前資
料夾中的所有檔案。如果您要使用
所選相片群組建立幻燈片播放,請
參閱下方的播放選定的項目。
可讓您選取要播放的特定相片。對
於所有媒體,它的工作方式基本相
播放選定的項目 同。
如需說明,請參閱第 35~36 頁上
的「從音頻 CD 建立播放清單」。
傳送
選取此功能表可將選取的檔案上傳
到網站 (Picasa、Facebook 等) 或
裝置。若要使用此功能,您需要
在線上網站上建立帳號,然後使用
「登入」功能登入。
請參閱第 38 頁上的「使用傳送功
能」。
||附註 |
您可以將檔案上傳到網絡裝置或裝置
1. 在顯示視訊、音樂或相片檔案時,按
選項功能表將會出現。
。
2. 使用 ▲▼ 按鈕選取傳送,然後按 v 按鈕。
3. 使用 ▲▼◄► 按鈕選取檔案,然後按 v 按
鈕。一個勾選標記會出現在檔案左側。
4. 重複步驟 3 選取並勾選其他檔案。
5. 若要從清單中移除某個檔案,請移至該檔
案,然後再次按 v 按鈕。
便會移除該檔案上的勾選標記。
6. 完成後,按 ▲▼◄► 按鈕選取傳送,然後按
v 按鈕。
「傳送」快顯視窗將會出現,並列出可將檔
案傳送至的線上網站 (Picasa、Facebook 等)
或裝置。
7. 選取目的地,然後按 v 按鈕。
8. 如果要將檔案傳送至線上網站,該網站將會
啟動。登入並依照畫面上的指示操作。
||附註 |
\\ 視光碟或儲存裝置而定,該功能表可能不相同。
\\ 若要將檔案傳送至線上網站,您必須具有該網站的帳
號。
傳送檔案
複製視訊、音樂或相片
內容
光碟/網絡裝置  光碟/USB  網絡
USB
裝置
音樂
支援
支援
相片
支援
支援
視訊
支援
支援
• 光碟 (CD-DA/CD-R/CD-RW,DVD±R (已最
終化)/ DVD+RW/DVD-RW (已最終化))  USB
• 複製到 USB 時,PTP USB 不可用。
38
[BD-J7500-ZK]AK68-02613V-00HK-.indd 38
繁體中文
2015-02-04 오후 3:16:40
網絡服務
透過將產品連接到網絡,您可以享受各種網絡服
務,如串流視訊或線上應用程式。
2. 配置網絡設定。
(請參閱第 22~25 頁)
10. 按 v 按鈕。設定個人檔案圖片畫面將會出
現。
||附註 |
建立 Samsung 帳戶
建立 Samsung 帳號,以便您可以充分利用
Samsung 在線上供應的所有服務。為每位家庭
成員設定帳號,以便他們可以在 Facebook、
Twitter 等上存取他們自己的帳號。如果您要下載
付費應用程式和最新電影,您也需要 Samsung
帳號。
1. 在主畫面上,按
網絡服務
1. 將產品連接至網絡。
(請參閱第 15 頁)
8. 選取「出生日期」欄位,然後使用上/下箭頭
按鈕或透過按遙控器上的數字選取數字。完
成後,請按 v 按鈕。
9. 填寫好所有欄位之後,按 ► 按鈕,然後按
v 按鈕。「正在連接」訊息將會出現,然
後顯示帳號確認訊息。
06
若要使用網絡服務,必須首先:
7. 用同樣的方式輸入密碼、您的名字和姓氏。
\\ Samsung 會將確認電子郵件發送到您輸入的位址。您
必須開啟電子郵件並按要求回應以最終化您的帳號。
11. 選取用於識別您的帳號的圖片,然後按 v
按鈕。帳號已建立畫面將會出現。
12. 按 v 按鈕。首頁畫面將會出現。
。登入畫面將會出現。
2. 選取建立帳戶,然後按 v 按鈕。
Samsung 帳號條款與規則、私隱權政策畫
面將會出現。
3. 按 v 按鈕接受,按 ► 按鈕,然後按 v 按
鈕。
建立帳戶畫面將會出現。
4. 選取 ID 欄位,然後按 v 按鈕。鍵盤快顯視
窗將會出現。
5. 使用鍵盤輸入電子郵件位址。使用箭頭按鈕
從一個字元移至另一個字元。
按 v 選取字元。 選取左側的大寫輸入大寫
字母。 選取 123#& 可選取其他符號。
6. 完成後,在鍵盤上選取完成,然後按 v 按
鈕。建立帳戶畫面將會再次出現。
39
[BD-J7500-ZK]AK68-02613V-00HK-.indd 39
繁體中文
2015-02-04 오후 3:16:40
網絡服務
使用 Samsung APPS 之前
使用 Samsung APPS
如果您尚未設定 Smart Hub,則在您第一次使用
「應用程式」時,產品將要求您執行 Smart Hub
設定程序。
1. 在首頁畫面中,選取 SAMSUNG APPS式,
然後按 v 按鈕。
2. 如果您尚未設定 Smart Hub,則 Smart Hub
快顯視窗將會出現,並詢問您是否要設定
Smart Hub。選取是,然後按 v 按鈕。
3. 選取開始,然後按 v 按鈕。條款與隱私權
畫面將會出現。
4. 在其他服務、條款與條件及選項畫面上,您
必須檢閱並同意「Smart Hub 條款和條件」
和「隱私權政策」才能使用 Smart Hub。
您可以從互聯網下載應用程式,存取各種應用程
式並在電視上觀賞。若要存取某些應用程式,您
必須具有 Samsung 帳號。
Samsung APPS 畫面總覽
1
Samsung APPS
推薦
1
2
3
4
5
2
3
4
5
我的 APP
WebBrowser
5. 向下捲動,然後按一下檢視詳細資料檢閱完
整的文件。
||附註 |
最熱門
6
最新內容
7
8
9
10
類別
3
\\ 您可以不同意「補充隱私權聲明」,但是如果您不同
意,則可能無法使用一或多項 Smart TV 功能。
6. 選取我全部同意,然後按 v 按鈕。「設定
已完成」畫面將會出現。按 v 按鈕。
2
1
推薦:顯示 Samsung 管理的建議內容。不能
刪除建議的應用程式。
2
我的 APP:在我的 APP 畫面中顯示可修改的
應用程式個人收藏。
3
最熱門、最新內容和類別:選取此項可檢視及
下載其他應用程式。
第一次開啟 SAMSUNG APPS 畫面時,Blu-ray
播放機會自動下載一組免費的應用程式。這些應
用程式下載好之後,它們將會出現在 SAMSUNG
APPS 畫面上。
若要查看其他應用程式,請在畫面底部選取最熱
門、最新內容或類別,然後按 v 按鈕。
最熱門顯示最熱門的應用程式,最新內容顯示最
新的應用程式。類別顯示一系列圖示,它們表示
視訊、遊戲和體育之類的類別。選取類別圖示,
然後按 v 按鈕。Blu-ray 播放機會顯示屬於該類
別的應用程式。
40
[BD-J7500-ZK]AK68-02613V-00HK-.indd 40
繁體中文
2015-02-04 오후 3:16:41
1. 選取最熱門、最新內容或類別,然後按 v
按鈕。
移動
||附註 |
2. 選取移動,然後按 v 按鈕。
3. 使用 ▲▼◄► 按鈕移動應用程式。
2. 如果選取類別,請選取類別圖示,然後按
v 按鈕。否則,請跳至步驟 3。
\\ 在最熱門、最新內容和類別畫面上,已下載的應用程式
上會顯示綠色箭頭。
3. 選取要下載的應用程式,然後按 v 按鈕。
應用程式的「詳細資訊」畫面將會出現。
4. 在畫面上選取下載,然後按 v 按鈕。「下
載」將變更為取消,並且應用程式開始下載。
5. 如果您要取消下載,請選取取消,然後按
v 按鈕。
6. 下載完成時,取消會變更為開啟。選取開
啟,然後按 v 按鈕啟動應用程式。或者,
按 RETURN 按鈕,直到 SAMSUNG APPS
畫面重新出現。
所下載的應用程式將顯示在 SAMSUNG
APPS 畫面中我的 APP 下。
||附註 |
\\ 如果剩餘內部記憶體不足導致無法下載應用程式,請連
接 USB 儲存裝置,然後重試。
啟動應用程式
1. 在首頁畫面上選取 SAMSUNG APPS,然後
按 v 按鈕。
2. 在 SAMSUNG APPS畫面上,使用 ▲▼◄►
按鈕選取應用程式,然後按 v 按鈕。應用
程式便會啟動。
41
[BD-J7500-ZK]AK68-02613V-00HK-.indd 41
1. 在「我的 APP」畫面中,選取要移動的應用
程式,然後按 v 按鈕 3 秒鐘。
網絡服務
選項功能表
06
下載應用程式
4. 應用程式處於所需位置之後,按 v 或 EXIT
按鈕。
刪除
1. 在「我的 APP」畫面中,選取要刪除的應用
程式,然後按 v 按鈕 3 秒鐘。
2. 選取刪除,然後按 v 按鈕。
3. 使用 ▲▼ 按鈕選取是,然後按 v 按鈕。
多重刪除
1. 在「我的 APP」畫面中,選取要刪除的應用
程式,然後按 v 按鈕 3 秒鐘。
2. 選取多重刪除,然後按 v 按鈕。
3. 使用 ▲▼ 按鈕選取要刪除的多個應用程式,
然後按 v 按鈕。一個鉤號會出現在所選應
用程式旁邊。
||附註 |
\\ 若要取消選取應用程式,請高亮顯示應用程式,然後按
v 按鈕。
4. 使用 ▼ 按鈕選取畫面底部的刪除,然後按
v 按鈕。
||附註 |
\\ 您還可以選取畫面底部的取消、全選或取消全選。
繁體中文
2015-02-04 오후 3:16:41
網絡服務
||附註 |
檢視詳細資料
1. 在「我的 APP」畫面中,選取要檢視詳細資
料的應用程式,然後按 v 按鈕 3 秒鐘。選
項功能表將會出現。
2. 選取檢視詳細資料,然後按 v 按鈕。
更新 App
變更檢視
此功能在「播放次數最多」視圖和「自訂視圖」
之間切換應用程式畫面,這可讓您隨心所欲排列
應用程式。
1. 在「我的 APP」畫面中,選取應用程式,然
後按 v 按鈕 3 秒鐘。
2. 選取變更視圖,然後按 v 按鈕。
3. 如果您要變更視圖,請選取是。如果您要保
留當前視圖,請選取否。
4. 按 v 按鈕。
1. 在「我的 APP」畫面中,選取任何應用程
式,然後按 v 按鈕 3 秒鐘。
2. 選取更新 App,然後按 v 按鈕。
3. 更新 Samsung APPS 畫面會列出具有可用
更新的所有應用程式。選取要更新的應用程
式,然後按 v 按鈕。您還可以選擇全選,
以更新列出的所有應用程式。
4. 選取更新,然後按 v 按鈕。
Screen Mirroring
鎖定/解鎖
此功能會阻止存取應用程式,必須輸入 PIN 才能
存取。解鎖可移除鎖定。
1. 在「我的 APP」畫面中,選取要鎖定的應用
程式,然後按 v 按鈕 3 秒鐘。
2. 選取鎖定/解鎖,然後按 v 按鈕。輸入您的
PIN。
3. 使用 ▲▼◄► 按鈕選取要鎖定的應用程式。
4. 按 v 按鈕。一個鉤號會出現在應用程式旁
邊。
5. 若要取消選取應用程式,請將其高亮顯示,
然後按 v 按鈕。
6. 選取要鎖定的所有應用程式,選取畫面底部
的儲存,然後按 v 按鈕。鎖形符號將會出
現在所選取的所有應用程式旁邊。
42
[BD-J7500-ZK]AK68-02613V-00HK-.indd 42
\\ 您還可以選取畫面底部的取消、全選或取消全選。
若要解鎖應用程式,請依照大致相同的說明操
作,但是選取有鎖形符號的應用程式。選取儲存
並按 v 按鈕之後,便會移除鎖形符號。
Screen Mirroring 功能可讓您在連接至產品的電
視上,檢視智慧型手機或 Android 平板電腦的畫
面。
1. 在首頁畫面中,選取 Screen Mirroring,然
後按 v 按鈕。
2. 在裝置上啟動 AllShare Cast 或 Screen
Mirroring。
3. 在裝置上,在可用的裝置清單中尋找播放機
的名稱並予以選取。
4. 電視會顯示正在連接訊息 (例如,正在連接至
Android_92gb...),然後顯示已連接訊息。
5. 一小會之後,裝置的畫面將出現在電視螢幕
上。
6. 若要停止 Screen Mirroring,請按遙控器上
的 EXIT 或 RETURN 按鈕,或是在智慧型手
機上退出 Screen Mirroring 功能。
繁體中文
2015-02-04 오후 3:16:42
\\ 當您正在使用 Screen Mirroring 功能時,可能會出現
視頻不流暢或音頻不同步的情況,具體視環境而定。
Web 瀏覽器提供兩種類型的瀏覽:游標瀏覽和連
結瀏覽。第一次啟動瀏覽器時,游標瀏覽處於作
用中狀態。如果您要使用滑鼠在 Web 瀏覽器中導
覽,則建議您讓游標瀏覽保持處於作用中狀態。
如果您要使用遙控器在 Web 瀏覽器中導覽,則建
議您使用連結瀏覽而不是游標瀏覽。連結瀏覽可
在 Web 瀏覽器中將高亮顯示從一個連結移至另一
個連結,並且如果您使用遙控器的話,移動速度
比游標瀏覽快得多。
若要啟動連結瀏覽,請依照下面的步驟操作:
\\ 藍芽傳送可能會干擾 Screen Mirroring 訊號。在使用
Screen Mirroring 功能之前,強烈建議您關閉智慧型
電話或智慧型裝置 (平板電腦等) 上的藍芽功能。
使用 Web 瀏覽器
您可以使用 Web 瀏覽器應用程式來存取互聯網。
在首頁畫面上,選取 WebBrowser,然後按 v
按鈕。
||附註 |
\\ 使用透過 HDMI 連接至 BD Wise 相容電視 - 且 BD
Wise 已開啟 - 的產品執行 Web 瀏覽器時,該瀏覽器會
最大化以填滿畫面,並且電視的解析度會自動設定為最
佳解析度。
\\ Web 瀏覽器與 Java 應用程式不相容。
\\ 如果您嘗試下載檔案,並且無法儲存該檔案,一則錯誤
訊息將會出現。
\\ 不支援用於線上購買產品的電子商務。
網絡服務
連結瀏覽和游標瀏覽
\\ 您可以將播放機連接至支援 AllShare Cast 的裝置。請
注意,可能並不是所有含有 AllShare Cast 的裝置都受
支援,具體視製造商而定。如需行動式連線支援的詳細
資訊,請參閱製造商的網站。
06
||附註 |
1. 使用遙控器上的 ▲▼◄► 按鈕將游標移至畫
面右上方的「連結瀏覽器」圖示。「連結瀏
覽器」圖示是從右邊數起的第三個圖示。
如果該圖示變成藍色並且詞語連結瀏覽器出
現在畫面上,則表示游標將位於正確的位
置。
2. 按 v 按鈕。連結瀏覽便已啟動並將在您
每次開啟 Web 瀏覽器時保持處於作用中狀
態。
控制台總覽
執行於畫面頂端的控制台含有一系列圖示,這些
圖示可以啟動許多有用的功能。下面說明這些圖
示,從畫面最左邊的圖示開始。
http://www.samsung.com
http://www.samsung.com
New Tab
100%
\\ 不支援 ActiveX。
\\ 存取某些企業運營的某些網站或 Web 瀏覽器可能會遭
到攔截。
\\ 不支援播放 Flash 視訊。
43
[BD-J7500-ZK]AK68-02613V-00HK-.indd 43
繁體中文
2015-02-04 오후 3:16:42
網絡服務
•
•
•
1
:移至上一頁。
:移至下一個網頁。
:顯示「書籤和歷程」畫面。您可以將目
前的頁面新增至書籤、選取現有的書籤以及
編輯和刪除書籤。您也可以檢視您的瀏覽歷
程以及選取要重新造訪的頁面。
• :移至 Web 瀏覽器首頁畫面。
•
:可讓您使用鍵盤快
顯視窗輸入頁面位址。
• :重新載入目前的頁面,以便重新整理畫
面。
• :將目前的頁面新增至書籤。
•
:可讓您使用鍵盤快顯視窗
輸入詞語或字元來搜尋資訊。請參閱下面的
「使用鍵盤快顯視窗」。
•
:可讓您以不同的百分比放大或縮小
畫面。
• / :可讓您在游標瀏覽和連結瀏覽之間
切換。
• :可讓您配置瀏覽器的設定。請參閱第
45~46 頁上的「使用設定功能表」。
• :關閉 Web 瀏覽器。
• http://www.samsung.com :開啟新的 Web 瀏覽
器標籤。
使用鍵盤快顯視窗
當您按一下
、
或存取資料或文字輸入欄位,然後按 v 按鈕
時,鍵盤快顯視窗將會出現。
若要透過遙控器使用鍵盤快顯視窗,請依照下面
的步驟操作:
http://www.samsung.com
2. 按 v 按鈕將該字母或數字輸入到輸入欄位
中。
3. 若要存取大寫字母,請將高亮顯示移至左上
方的大寫鍵,然後按 v 按鈕。在高亮顯示
大寫鍵的情況下再次按 v 按鈕可再次存取
小寫字母。
4. 若要存取符號和其他標點符號,請高亮顯示
左側的 123#&,然後按 v 按鈕。
5. 若要刪除已輸入的字元,請將高亮顯示移至
:,然後按 v 按鈕。
6. 若要刪除所有已輸入的字元,請將高亮顯示
移至清除,然後按 v 按鈕。
7. 完成輸入後,請將高亮顯示移至完成,然後
按 v 按鈕。
||附註 |
\\ 如果您將無線鍵盤連接至產品,則可以使用無線鍵盤來
輸入字母、數字、符號和標點符號。請注意,僅當鍵盤
快顯視窗出現時,無線鍵盤才能工作,並且只能用於輸
入字母、數字、符號和標點符號。
鍵盤快顯視窗上的選項
若要存取鍵盤快顯視窗選項,請高亮顯示鍵盤左
下方的 ,然後按 v 按鈕。
語言
選取鍵盤的語言。
您可以選取英文、法文、俄文等。
建議文字
在您輸入文字時,鍵盤會推薦建議
的詞語。您可以將此功能設定為開
啟或關閉。
New Tab
http://www.samsung.com
http://www.samsung.com
1. 使用遙控器上的 ▲▼◄► 按鈕將高亮顯示移
至要選擇的字母或數字。
100%
New Tab
輸入字元時,將會出現建議文字。
1
2
3
4
5
6
7
8
9
0
大寫
手
田
水
口
廿
卜
山
戈
人
心
:
;

123#&
日
尸
木
火
土
竹
十
大
中
~
@
!
完成
:
難
金
女
月
弓
一
,
。
/
?
-
$
取消
_+%
HKG
www. .com
清除
:
44
[BD-J7500-ZK]AK68-02613V-00HK-.indd 44
繁體中文
2015-02-04 오후 3:16:45
加重音字元預覽
如果您要輸入帶重音记号的字母,
請選取這個選項。
許可的網站
使用設定功能表
「設定」功能表包含的功能用於控制瀏覽器的操
作方式以及瀏覽器的安全功能。要開啟「設定」
功能表,請高亮顯示 圖示,然後按 v 按鈕。
若要選取設定功能表中的選項,請高亮顯示選
項,然後按 v 按鈕。
http://www.samsung.com
http://www.samsung.com
100%
New Tab
啟用抓取
許可的網站
[秘人瀏覽]開啟
啟用或停用私人模式。
啟用私人模式時,瀏覽器不會保留
您造訪的網站的 URL。如果您要啟
[私人瀏覽] 開啟 用私人模式,請選取是。
/[私人瀏覽] 關閉 如果私人模式正在執行,「停止」
圖示將出現在畫面頂端 URL 的前
面。若要停用私人模式,請在啟用
私人模式的情況下,再次選取它。
設定搜尋引擎
網絡瀏覽器設定
說明
關閉
啟用抓取/
停用抓取
開啟和關閉抓取器。「抓取器」功
能已開啟時,無須拖動捲軸,您便
可以上下移動網頁。
「抓取器」功能僅在游標瀏覽中可
用。
45
[BD-J7500-ZK]AK68-02613V-00HK-.indd 45
網絡服務
在您輸入字母時,鍵盤會預測下一
個字母。預測顯示為圍繞您剛剛輸
預測下一個英文
入的字母的環。您可以選取預測的
字母
字母,也可以移至另一個字母。您
可以將此功能設定為開啟或關閉。
可讓您限制兒童造訪不適宜網頁,
方法是僅允許他們造訪您已註冊的
網站。
每次存取此功能,PIN 畫面都會出
現。第一次存取此功能時,請使用
遙控器上的數字按鈕輸入預設 PIN
0000。
您可以對許可的網站功能使用重設
密碼來變更 PIN。請參閱下面的內
容。
許可的網站功能:開啟或關閉許可
的網站功能。
重設 [許可的網站] 密碼:變更「許
可的網站」密碼。
新增目前的網站:可讓您將目前顯
示的網站新增至「許可的網站」清
單。
管理許可的網站:可讓您鍵入要新
增至「許可的網站」清單的 URL
以及從「許可的網站」清單刪除網
站。
如果您開啟此功能並且未將任何網
站新增至「許可的網站」清單,則
您將無法造訪任何互聯網網站。
06
重設會擦除 Samsung 鍵盤的
記憶體。選取「重設」會擦除
重設建議的文字
Samsung 鍵盤已學習的關於您的
資料
書寫習慣的所有內,包括您使用過
的所有新詞語。
設定搜尋引擎
可讓您設定所需的搜尋引擎。
繁體中文
2015-02-04 오후 3:16:46
網絡服務
網絡瀏覽器設定
說明
設定為首頁:您可以設定瀏覽器的
首頁。
彈击式視窗攔截:開啟和關閉快顯
視窗攔截。
頁面封鎖:您可以決定是否攔截
廣告並選取要對其攔截廣告的
URL。
一般:您可以刪除個人資訊,例
如網站歷程和瀏覽資料 (cookie 等
等),並將所有 Web 瀏覽器設定重
設為其出廠預設值。您還可以設定
安全模式。
||附註 |
將互聯網服務帳號連結至產品
「連結服務帳號」功能可讓您透過 Pandora 等互
聯網服務將產品連結至帳號,以便在您啟動服務
的應用程式時,產品可自動讓您登入該服務。
請轉至 HOME  登入  使用 Facebook 來建立
來註冊您的帳號。
BD-LIVE™
將產品連接到網絡後,您可以享受 BD-LIVE 相容
光碟上提供的各種與電影相關的服務內容。
1. 將 USB 快閃記憶體磁碟機插入產品前面的
USB 插孔,然後檢查其剩餘記憶體。記憶體
裝置至少要有 1GB 可用空間才能容納 BDLIVE 服務。
\\ 請將安全模式設定為開啟,以避免
存取惡意/釣魚網站,以及阻止惡
意程式碼執行。
編碼方式:您可以將網頁的「編
碼」設定設為「自動」,也可以從
清單中手動選取編碼格式。
游標:您可以在將游標設定為「游
標」時設定游標的速度,並可以將
Smart Cursor 設定為開啟和關閉。
瀏覽器資訊:顯示 Web 瀏覽器的
版本號和版權資訊。
6. 選取装置選擇,然後按 v 按鈕。
7. 選取 USB 裝置,然後按 v 按鈕。
提供 Web 瀏覽器操作的基本資
訊。
9. 從光碟製造商提供的 BD-LIVE 服務內容清單
中選取項目。
3. 選取網絡,然後按 v 按鈕。
4. 選取 BD Live 設定,然後按 v 按鈕。
5. 選取 BD 資料管理,然後按 v 按鈕。
8. 插入支援 BD-LIVE 的 Blu-ray 光碟。
||附註 |
||附註 |
\\ 視網站而定,某些網絡瀏覽器設定功能可能未啟動。未
啟動的功能會變灰,無法使用。
46
[BD-J7500-ZK]AK68-02613V-00HK-.indd 46
2. 在首頁畫面上選取設定,然後按 v 按鈕。
\\ 使用 BD-LIVE 和提供的內容的方式可能會因光碟製造商
而異。
繁體中文
2015-02-04 오후 3:16:47
附錄
其他資訊
07
附註
• 對於某些 3D 光碟,要在 3D 播放期間停止電影,請按一次 5 (停止) 按鈕。
電影將會停止,並會停用 3D 模式選項。
若要在播放 3D 電影時變更 3D 選項選取,請按 5 (停止) 按鈕一次。首頁畫面功能表
將會出現。再按一次 5 (停止) 按鈕,然後在 Blu-ray 功能表中選取 3D 設定。
• 根據電視螢幕上畫面的內容和位置,您可能會在左側和/或右側看到垂直的黑條。
附錄
3D 設定
電視外觀比例
• 視光碟類型的不同,某些縱橫比可能不可用。
• 如果選取不同於電視縱橫比的縱橫比選項,則圖像可能會變形。
• 如果選取 16:9 原始大小,則電視可能會顯示 4:3 Pillarbox (畫面兩側有黑條)。
BD Wise (僅限 Samsung 產品)
• BD Wise 為開啟時,「解析度」設定會自動預設為 BD Wise,並且 BD Wise 會出現在
「解析度」功能表中。
• 如果將產品連接至不支援 BD Wise 的裝置,則不能使用 BD Wise 功能。
• 為了 BD Wise 正常操作,請在產品和電視上都將 BD Wise 選項設定為「開啟」。
設定
數碼輸出
• 請務必選取正確的「數碼輸出」,否則將聽不到聲音或只聽到很大聲的雜音。
• 如果 HDMI 裝置 (AV 接收器,電視) 與壓縮的格式 (Dolby digital, DTS) 不相容,則音
頻信號輸出為 PCM。
• 一般 DVD 沒有 BONUSVIEW 音頻和「導覽音效」。
• 一些 Blu-ray 光碟沒有 BONUSVIEW 音頻和「導覽音效」。
• 此「數碼輸出」設定不影響輸出到電視的 HDMI 音頻。
它影響將產品連接到接收器時的光纖和 HDMI 音頻輸出。
• 如果播放 MPEG 音頻聲道,則音頻訊號將輸出為 PCM,而不管「數碼輸出選取」設定
為何 (PCM 或位元流)。
PCM 向下採樣
• 即使將 PCM 向下採樣設定為關閉,某些光碟也將透過光學數碼輸出只輸出向下採樣的
音頻。
• HDMI
-- 如果您的電視與壓縮多聲道格式 (Dolby Digital, DTS) 不相容,則產品可能會輸出
PCM 2 聲道向下採樣的音頻,即使將在設定功能表上選取了位元流 (重新編碼或未經
處理) 也是如此。
-- 如果電視與超過 48kHz 的 PCM 取樣率不相容,則產品會以 48kHz 輸出。
47
[BD-J7500-ZK]AK68-02613V-00HK-.indd 47
繁體中文
2015-02-04 오후 3:16:47
附錄
BD-Live 互聯網連接
• 甚麼是有效的證書?
當產品使用 BD-LIVE 來將光碟資料和要求傳送至伺服器以認證光碟時,伺服器使用所傳
送的資料來檢查該光碟是否有效,並將證書傳回給產品。
• 使用 BD-LIVE 內容時,互聯網連線可能會受到限制。
BD 資料管理
設定
• 在外部記憶體模式中,如果在播放期間斷開 USB 裝置的連接,光碟播放將會停止。
• 只支援在 FAT 檔案系統 (DOS 8.3 卷標) 中格式化的那些 USB 裝置。
建議使用支援 USB 2.0 通訊協定、4 MB/秒或更快讀/寫速度的 USB 裝置。
• 「恢復播放」功能在格式化儲存裝置後可能不工作。
• 「BD 資料管理」可使用的總記憶體可能會因條件而異。
Anynet+(HDMI-CEC)
• 視您的電視而定,某些 HDMI 輸出解析度可能不起作用。請參閱電視的使用手冊。
• 如果 HDMI 電纜線不支援 CEC,就不能使用此功能。
• 如果您的 Samsung 電視具有 Anynet+ 標誌,則它支援 Anynet+ 功能。
選擇音頻語言
• 如果 BONUSVIEW 部分不含任何 BONUSVIEW 音頻設定,則 ◄► 指示符不會出現在螢
幕上。
• 透過「音頻語言」功能可使用的語言視光碟上錄製的語言而定。此功能和某些語言可能
不可用。
• 某些 Blu-ray 光碟可能允許您選擇英文的 PCM 或 Dolby Digital 聲道。
選擇字幕語言
媒體播放
• 根據 Blu-ray 光碟 / DVD,您可能可以在光碟功能表中變更所需的字幕。按 DISC
MENU 按鈕。
• 此功能取決於在光碟上所編碼的選定字幕,可能不會在所有的 Blu-ray 光碟/DVD 上起
作用。
• 如果 Blu-ray 光碟具有 BONUSVIEW 部分,則還會出現關於主要特徵/BONUSVIEW 模
式的資訊。
• 此功能同時變更主要和輔助字幕。
• 主要和輔助字幕總數分別顯示。
• 如果您按遙控器上的 SUBTITLE 按鈕,字幕列將會出現。
按 RETURN 按鈕可移除字幕列。
48
[BD-J7500-ZK]AK68-02613V-00HK-.indd 48
繁體中文
2015-02-04 오후 3:16:47
根據內容類型的解像度
自動
UHD 輸出 : 自動
電影幀率 : 自動
UHD 輸出 : 關閉
電影幀率 : 關閉
電影幀率 : 自動 (24 Fs)
※ 僅限 1080p 和 1080i
1080p
1080i
720p
576p/480p
電子內容/數碼內容
Blu-ray 光碟的解像度
2160p@24F
1080p@24F
電視輸入的最大解像度
1080p
2160p@24F
1080p@24F
電視輸入的最大解像度
附錄
BD Wise
Blu-ray 光碟
07
內容類型
設定
1080p@24F
1080p@24F
1080p
1080i
720p
576p/480p
1080p
1080i
720p
576p/480p
內容類型
設定
BD Wise
自動
UHD 輸出 : 自動
DVD 24Fs 轉換 : 自動
電影幀率 : 自動
UHD 輸出 : 關閉
DVD 24Fs 轉換 : 關閉
電影幀率 : 關閉
電影幀率 : 自動 (DVD 24Fs 轉換 : 自動)
※ 僅限 1080p 和 1080i
1080p
1080i
720p
576p/480p
DVD
576i/480i
2160p@24F
1080p@24F
電視輸入的最大解像度
電視輸入的最大解像度
1080p@24F
1080p@60F
1080i
720p
576p/480p
||附註 |
\\ 如果連接至產品的電視不支援電影幀或選取的解析度,訊息「如果在選擇「確定」後並未顯示畫面,請稍候 15 秒以返
回先前的解像度。是否要變更解像度」將會出現。如果選取是,電視的螢幕空白 15 秒鐘,然後解析度將自動恢復為先
前的值。
\\ 如果在變更解析度之後螢幕保留空白,請取出所有光碟,然後按住產品頂端的 @ 按鈕超過 5 秒鐘。起始設定訊息將出
現在畫面上,且播放機會自動關閉電源。再次開啟產品時,將會重設所有設定。再次執行「初始設定」程序。然後移至
功能表中的設定 > 圖像 > 解像度,並選取電視的正確解析度。
\\ 當執行「初始設定」程序時,僅重新選取語言和畫面比例 (螢幕大小和格式)。重設不影響網絡設定,因此應該可以跳過
「網絡設定」和「軟件更新」。
\\ 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。
\\ Blu-ray 光碟必須具有 24 幀功能,產品才能使用電影幀幅 (24 fps) 模式。
49
[BD-J7500-ZK]AK68-02613V-00HK-.indd 49
繁體中文
2015-02-04 오후 3:16:47
附錄
數碼輸出選取
設定
PCM
支援 HDMI
的 AV 接收器
連線
PCM
Blu-ray 光碟
上的音頻流
Dolby
Digital
Dolby
Digital Plus
Dolby
TrueHD
DTS
最多 PCM
7.1 聲道
最多 PCM
7.1 聲道
最多 PCM
7.1 聲道
最多 PCM
7.1 聲道
最多 PCM
6.1 聲道
位元流(未經處理)
光纖
支援 HDMI
的 AV 接收器
光纖
PCM 2 聲道
PCM
PCM 2 聲道
Dolby
Digital
Dolby
PCM 2 聲道
Digital Plus
Dolby
PCM 2 聲道
TrueHD
PCM 2 聲道
PCM 2 聲道
DTS
Dolby
Digital
Dolby
Digital
Dolby
Digital
DTS
位元流(DTS重 位元流(Dolby D
新編碼)
重新編碼)
支援 HDMI 的 支援 HDMI 的
AV 接收器或光纖 AV 接收器或光纖
重新編碼的
DTS
重新編碼的
DTS
重新編碼的
DTS
重新編碼的
DTS
重新編碼的
DTS
DTSDTSHD High
最多 PCM
HD High
重新編碼的
DTS
PCM 2 聲道
Resolution 7.1 聲道
Resolution
DTS
Audio
Audio
DTS-HD
DTS-HD
最多 PCM
重新編碼的
Master
PCM 2 聲道 Master
DTS
7.1 聲道
DTS
Audio
Audio
PCM
PCM 2 聲道 PCM 2 聲道 PCM 2 聲道 PCM 2 聲道 PCM 2 聲道
Dolby
最多 PCM
Dolby
Dolby
DVD 上的音
PCM 2 聲道
Dolby Digital
Digital
5.1 聲道
Digital
Digital
頻流
最多 PCM
DTS
PCM 2 聲道
DTS
DTS
DTS
6.1 聲道
將主要特
徵音頻和
BONUSVIEW
僅輸出主要特徵音頻,以 音頻流一起
將主要特徵音頻和
便 AV 接收器可以解碼音 解碼為 PCM
Blu-ray 光碟
BONUSVIEW 音頻流一
頻位元流。
任意
音頻,並新
的清晰度
起解碼為 PCM 音頻,
您將聽不到 BONUSVIEW 增「導覽音
並新增「導覽音效」。
音頻和「導覽音效」。 效」,然後將
PCM 音頻重新
編碼為 DTS 位
元流。
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
重新編碼的
Dolby Digital *
PCM 2 聲道
Dolby Digital
DTS
將主要特徵音頻
和 BONUSVIEW
音頻流一起解碼
為 PCM 音頻,並
新增 Navigation
Sound Effects
(導覽音效),
然後將 PCM 音
頻重新編碼為
Dolby Digital 位
元流或 PCM。
*如果 Source Stream 是 2 聲道或單聲道,則不會套用「Dolby D重新編碼」設定。 輸出將是 PCM 2
聲道。
Blu-ray 光碟可能包括三種音頻流:
-- 主要特徵音頻:主要特徵的音頻聲道。
-- BONUSVIEW 音頻:附加聲道,例如導演或演員的註解。
-- 導覽音效:選擇一些功能表導覽時,導覽音效可能會發出聲音。導覽音效在每張 Blu-ray 光碟上各不
相同。
50
[BD-J7500-ZK]AK68-02613V-00HK-.indd 50
繁體中文
2015-02-04 오후 3:16:48
故障排除
在請求服務前,請嘗試下列解決方案。
07
解決方案
遙控器無法執行任何操作。
• 檢查遙控器裡的電池。它們可能需要更換。
• 在離產品不超過 6.1 米 的距離內操作遙控器。
• 取出電池,按住一個或多個按鈕幾分鍾以耗盡遙控器內部的微處理
器電池電量,以便進行重設。裝回電池,然後再次嘗試操作遙控
器。
無法播放光碟。
• 確定光碟安裝時,光碟的標籤面朝上。
• 檢查 Blu-ray 光碟/DVD 的區域代碼。
光碟功能表沒有出現。
• 請確定該光碟具有光碟功能表。
禁止訊息出現在螢幕上。
• 按無效的按鈕時,此訊息就會出現。
• Blu-ray 光碟/DVD 軟件不支援此功能 (例如,角度)。
• 您請求的標題、章節編號或搜尋時間超出範圍。
播放模式與「設定功能表」選擇不同。
• 如果光碟沒有相應功能的編碼,則在「設定功能表」中選定的功能
可能不能正常工作。
屏幕比例無法更改。
• Blu-ray 光碟/DVD 光碟上的「螢幕比例」是固定的,無法變更。
• 這不是產品運作失常。
無音頻。
• 請確定您已經在 音頻 選項(音頻選項) 功能表中選擇了正確的「數碼
輸出」。
屏幕一片空白。
• 如果將 HDMI 輸出設定為電視不能支援的解析度 (例如 1080p),則
在電視上可能看不到圖片。
• 在內部無光碟的情況下,按 @ 按鈕 (在頂端面板上) 超過 5 秒鐘。起
始設定訊息將出現在畫面上,且播放機會自動關閉電源。再次開啟
產品時,將會重設所有設定。
• 恢復出廠預設設定後,將會刪除所有使用者已儲存的 BD 資料。
51
[BD-J7500-ZK]AK68-02613V-00HK-.indd 51
附錄
問題
繁體中文
2015-02-04 오후 3:16:48
附錄
問題
解決方案
忘記密碼。
• 在內部無光碟的情況下,按 @ 按鈕 (在頂端面板上) 超過 5 秒鐘。起
始設定訊息將出現在畫面上,且播放機會自動關閉電源。再次開啟
產品時,將會重設所有設定。
除非絕對必要,否則不要使用此操作。
• 恢復出廠預設設定後,將會刪除所有使用者已儲存的 BD 資料。
畫面出現噪訊或失真。
• 請確定光碟未弄髒或無刮痕。
• 清潔光碟。
無 HDMI 輸出。
• 檢查電視與產品的 HDMI 插孔之間的連接。
• 檢查電視是否支援 576p/480p、720p、1080i 或 1080p HDMI 輸
入解析度。
螢幕上顯示不正常的 HDMI 輸出。
• 如果畫面上出現雪花噪訊,則表示電視不支援 HDCP (高頻寬數碼內
容保護)。
如果您遇到其他問題。
• 轉至目錄,查找含有您遇到問題之功能的相關資訊的使用手冊部
分,然後再次遵照該程序操作。
• 如果仍然無法解決問題,請聯絡距您最近的 Samsung 授權服務中
心。
播放網絡裝置上的多媒體
您可以看到網絡裝置上共用的資料夾,
但是看不到檔案。
• 多媒體清單僅顯示視訊、相片和音樂檔案。不顯示其他類型的檔
案。
視訊播放斷斷續續。
• 檢查網絡是否穩定。
• 檢查網絡電纜是否正確連接,以及網絡是否超負荷。
• DLNA 相容裝置與產品之間的無線連線不穩定。
請檢查連線。
產品與電腦之間的網絡連線不穩定。
• 同一個子網絡中的 IP 地址應該是唯一的。
如果不唯一,IP 干擾可能會導致此現象。
• 檢查是否啟用了防火牆。
若啟用,請停用防火牆功能。
52
[BD-J7500-ZK]AK68-02613V-00HK-.indd 52
繁體中文
2015-02-04 오후 3:16:48
問題
解決方案
BD-LIVE
使用 BD-LIVE 服務時發生錯誤。
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服務。
可以在 BD 資料管理中檢查可用大小。(請參閱第 20 頁)
附錄
• 使用網絡狀態功能測試網絡連線是否正常工作。(請參閱第 20 頁)
• 檢查是否將 USB 記憶體裝置連接至產品。
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服務。
可以在「BD 資料管理」中檢查可用大小。(請參閱第 20 頁)
• 檢查 BD-Live 互聯網連接選項是否設定為允許 (所有)。
• 如果上述所有原因都不正確,請與內容提供商聯絡或將產品更新為
最新的韌體。
07
產品無法連接到 BD-LIVE 伺服器。
||附註 |
\\ 恢復出廠預設設定後,將會刪除所有使用者已儲存的 BD 資料。
53
[BD-J7500-ZK]AK68-02613V-00HK-.indd 53
繁體中文
2015-02-04 오후 3:16:48
附錄
光碟與格式相容性
本播放機可以播放的光碟類型和內容
媒體
視訊
音樂
相片
光碟類型
Blu-ray 光碟
3D Blu-ray
光碟
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
詳細資料
以 BD-RE 格式錄製的 BD-ROM 或 BD-RE/-R。
DVD-VIDEO,已錄製然後最終化的已錄製 DVD+RW/DVD-RW(V)/DVD-R/+R,
或者包含 DivX,MKV,MP4 內容的 USB 儲存媒體。
在 CD-RW/-R,DVD-RW/-R,BD-RE/-R 或 USB 儲存媒體上錄製的包含 MP3
或 WMA 內容的音樂。
在 CD-RW/-R,DVD-RW/-R,BD-RE/-R 或 USB 儲存媒體上錄製的包含 JPEG
內容的音樂。
||附註 |
\\ 由於光碟類型或錄製條件的原因,本播放機可能不能播放某些 CD-RW/-R 和 DVD-R 光碟。
\\ 如果未以 DVD 視訊格式正確錄製 DVD-RW/-R,它將無法播放。
\\ 本播放機不能播放 DVD-R 上以超過 10 Mbps 的位元速率錄製的內容。
\\ 本播放機不能播放 BD-R 或 USB 裝置上以超過 25 Mbps 的位元速率錄製的內容。
\\ 一些類型的光碟片可能無法播放,或者在使用特定功能時(例如執行角度變更和縱橫比調整時)無法播放。關於光碟的
資訊已在光碟盒上詳細寫明。請在需要時參閱此資訊。
\\ 播放 BD-J 標題時,與普通標題相比,加載時間可能稍長一些,可能某些功能執行起來很慢。
本播放機無法播放的光碟類型
• HD DVD
• DVD-ROM/PD/
MV 等等
• DVD-RAM
• 超級音頻 CD
(CD 層除外)
• DVD-RW(VR 模式) • 用於編寫的 3.9 GB
DVD-R。
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-G 只能播放音
頻,不能播放視訊。)
54
[BD-J7500-ZK]AK68-02613V-00HK-.indd 54
繁體中文
2015-02-04 오후 3:16:48
本播放機可以播放的光碟標誌
區域代碼
Blu-ray 光碟
區域代碼
地區
a
北美洲,中美洲,南美洲,
韓國,日本,台灣,香港和
東南亞。
b
歐洲,格陵蘭,法國各地
區,中東,非洲,澳大利亞
和紐西蘭。
C
印度,中國,俄羅斯,中亞
和南亞。
1
美國,美國領土和加拿大
2
歐洲,日本,中東,埃及,
非洲,格陵蘭
3
台灣,韓國,菲律賓,印
尼,香港
4
墨西哥,南美洲,中美洲,
澳大利亞,新西蘭,太平洋
群島,加勒比
5
俄羅斯,東歐,印度,
朝鲜,蒙古
6
中國
DVD-VIDEO
55
[BD-J7500-ZK]AK68-02613V-00HK-.indd 55
Blu-ray 光碟
3D Blu-ray 光碟
BD-LIVE
DivX
附錄
光碟類型
07
播放機和光碟都按照地區進行編碼。這些區域代
碼必須相匹配才能播放光碟。如果這些區域代碼
不匹配,則不能播放光碟。
本播放機的區碼在播放機的後面板上顯示。
英國,法國,德國等國家/
地區的 PAL 廣播系統
繁體中文
2015-02-04 오후 3:16:49
附錄
支援的格式
視訊檔案支援
副檔名
容器
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.ps
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
*.webm
WebM
*.rmvb
RMVB
視訊轉碼器
MVC
Motion JPEG
H.264 BP/MP/
HP
DivX 3.11 / 4 /
5/6
MPEG4 SP/ASP
Window Media
Video v9(VC1)
AVS
MPEG2
MPEG1
Microsoft
MPEG-4 v3
Window
Media Video
v7(WMV1),
v8(WMV2)
H 263
Sorrenson
Microsoft
MPEG-4 v1, v2
VP6
VP8
RV8/9/10
(RV30/40)
解像度
幀速率 (fps) 位元速 (Mbps)
24/25/30
1920x1080
音頻轉碼器
60
FHD : MAX 30
HD : MAX 60
30
1280x720
AC3
LPCM
ADPCM(IMA,
MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS (Core, LBR)
MAX 30
720x576
640x480
1920x1080
6~30
6~30
4
20
Vorbis
1920x1080
6~30
20
RealAudio 6
`` 限制
-- 即使檔案由「視訊檔案支援」表格中列出的受支援轉碼器來編碼,如果其內容有問題的話,也可能無
法播放。
-- 如果檔案的容器資訊錯誤或檔案本身損毀,則不能保證可以正常播放。
-- 位元速率/幀速率高於「視訊檔案支援」表格中所示值的檔案在播放期間可能會斷斷續續。
-- 如果檔案的索引表格損壞,搜尋 (跳過) 功能將無法使用。
-- 透過網絡連線遠端播放檔案時,視訊播放可能會斷斷續續,具體視網絡速度而定。
-- 某些 USB/數碼相機裝置可能與本產品不相容。
-- 僅銷往中國和香港的型號支援 RMVB 格式。
-- 僅銷往中國的型號支援 AVS 轉碼器。
-- 僅銷往中國的型號支援 *.ps 副檔名。
-- 銷往美國的型號不支援 DivX 轉碼器。
56
[BD-J7500-ZK]AK68-02613V-00HK-.indd 56
繁體中文
2015-02-04 오후 3:16:49
`` 視訊解碼器
名稱
`` 音頻解碼器
-- 支援 WMA 10 Pro (最高 5.1)
-- 不支援 WMA 無損音頻。
-- 還支援 M2 設定檔。
-- 僅銷往中國和香港的型號支援 RealAudio 10 無
損格式。
-- 不支援 QCELP/AMR NB/WB。
-- 支援 vorbis (最多 2 聲道)。
-- 支援 DD+ (最多 7.1 聲道)。
-- DTS LBR 轉碼器僅對於 MKV / MP4 / TS 容器
受支援。
ĞĞ
受支援的 DivX 字幕檔案格式
*.ttxt、*.smi、*.srt、*.sub、*.txt
||附註 |
\\ 一些 DivX、MKV 和 MP4 格式的光碟可能不能播放,
具體視視訊解析度和幀速率而定。
Xsub
AVI
SubStation Alpha
MKV
Advanced
SubStation Alpha
MKV
附錄
內部
副檔名
07
-- 最高支援 H.264 Level 4.1。(不支援 FMO/
ASO/RS)
-- 不支援 VC1/AP/L4。
-- WMVv7、v8、MSMPEG4 v3、MVC、VP6 以
外的轉碼器
1)低於 1280 x 720:最高 60 幀
2)高於 1280 x 720:最高 30 幀
-- 不支援 GMC 2 或更高版本。
-- -- 僅支援 SVAF 頂端/底端、並排、左/右觀看
順序類型 (2 ES)
-- 支援 BD MVC 規格。
SubRip
MKV
VobSub
MKV
MPEG-4 Timed text
MP4
TTML in smooth
streaming
MP4
SMPTE-TT TEXT
MP4
SMPTE-TT PNG
MP4
支援的音樂檔案格式
副檔名
類型
轉碼器
支援範圍
*.mp3
*.mpeg
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
最多支援 2 聲道。
*.ogg
OGG
Vorbis 最多支援 2 聲道。
*.wma
WMA
WMA
適用於 WMA。最
高支援 10 Pro 5.1
聲道。
不支援 WMA 無損
音頻。
最高支援 M2 設定
檔
*.wav
wav
wav
-
midi
midi
不支援類型 0、類型
1 和搜尋。
僅可與 USB 搭配使
用。
支援的字幕檔案格式
外部
名稱
副檔名
MPEG-4 Timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub 或 .txt
SubStation Alpha
.ssa
Advanced
SubStation Alpha
.ass
Powerdivx
.psb
SMPTE-TT Text
.xml
57
[BD-J7500-ZK]AK68-02613V-00HK-.indd 57
*.mid
*.midi
繁體中文
2015-02-04 오후 3:16:49
附錄
副檔名
類型
轉碼器
支援範圍
*.ape
ape
ape
不支援 NonSmart。
*.aif
*.aiff
AIFF
AIFF
-
*.m4a
ALAC
ALAC
-
支援的圖片檔案格式
副檔名
類型
解析度
*.jpg
*.jpeg
JPEG
15360x8640
4096x4096
*.png
PNG
*.bmp
BMP
4096x4096
*.mpo
MPO
15360x8640
USB 連接注意事項
• 本播放機支援 USB 儲存媒體,MP3 播放器,
數碼相機,USB 讀卡器。
• 某些 USB/數碼相機裝置可能與本播放機不相
容。
• 本播放機支援 FAT16,FAT32 和 NTFS 檔案系
統。
• 將 USB 裝置直接連接到播放機的 USB 埠。
透過 USB 線纜連接可能會導致相容性問題。
• 如果將多個記憶體裝置插入多卡讀卡器中,則
可能會導致讀卡器無法正常操作。
• 本播放機不支援 PTP 通訊協定。
• 在「載入」過程中不要斷開 USB 裝置連接。
• 影像解像度越高,顯示影像所需的時間越長。
• 本播放機不能播放從商業網站下載的帶有 DRM
(Digital Rights Management) 的 MP3 檔案。
• 本播放機僅支援 30fps(幀速率)的視訊。
58
[BD-J7500-ZK]AK68-02613V-00HK-.indd 58
• 本播放機僅支援 USB 大量儲存裝置類別 (MSC)
裝置,例如隨身碟和 USB HDD。(不支援
HUB。)
• 某些 USB HDD 裝置,多卡讀卡器及隨身碟可
能與本播放機不相容。
• 如果某些 USB 裝置需要過功率,則它們可能會
受到電路安全裝置的限制。
• 如果從 USB HDD 播放不穩定,請透過將 HDD
插入到墻上插座來提供額外的電源。
如果問題仍然存在,請與 USB HDD 製造廠商
聯絡。
• 對於任何資料檔案損壞或資料遺失,
SAMSUNG 不承擔任何責任。
• 本播放機不支援 NTSF 壓縮檔案,備用檔案或
加密的檔案。
-- 可以在桌上型電腦上修復或格式化 USB 裝
置。(僅限 MS-Windows 作業系統)
AVCHD(先進視訊轉碼器高解像度)
• 本播放機可以播放 AVCHD 格式的光碟。這些
光碟一般在攝錄放影機中錄製和使用。
• AVCHD 格式是高解像度數碼視訊相機格式。
• MPEG-4 AVC/H.264 格式以高於常見影像壓縮
格式效率高的效率壓縮影像。
• 一些 AVCHD 光碟使用「x.v.Color」格式。
本播放機可以播放使用「x.v.Color」格式的
AVCHD 光碟。
• 「x.v.Color」是 Sony Corporation 的商標。
• 「AVCHD」和 AVCHD 標誌是 Matsushita
Electronic Industrial Co., Ltd. and Sony
Corporation 的商標。
||附註 |
\\ 一些 AVCHD 格式光碟可能不能播放,具體視錄製條件
而定。
AVCHD 格式的光碟需要最終化。
\\ 與普通 DVD 攝錄放影機光碟相比,「x.v.Color」提供
更寬的色彩範圍。
繁體中文
2015-02-04 오후 3:16:49
符合性和相容性聲明
[BD-J7500-ZK]AK68-02613V-00HK-.indd 59
附錄
59
07
並非所有光碟都相容
• 根據下面所述的限制及本手冊中(包括本手冊中的「光碟類型和特性」一節) 說明的限制,可以播放
的光碟類型有:預先錄製的商業 BD-ROM,DVD-VIDEO 和音頻 CD (CD-DA);BD-RE/-R,DVDRW/-R;以及 CD-RW/-R。
• 上述光碟以外的光碟及/或不設計為使用本播放機播放。並且由於下面提供的一個或多個原因,上述
的一些光碟也可能無法播放。
• Samsung 不能保證本播放機可以播放帶有 BD-ROM,BD-RE/-R,DVD-VIDEO,DVD-RW/-R,
DVD+RW/+R 和 CD-RW/-R 標誌的每張光碟,並且本播放機可能不能回應所有操作指令或操作每張
光碟的所有功能。下面列出造成這些問題和其他光碟相容性以及播放機操作新格式或現有格式的光碟
問題的可能原因:
-- Blu-ray 是新的且不斷發展的格式,且本播放機可能無法操作 Blu-ray 光碟的所有功能,因為一些
功能可能是在生產本播放機後新增到 Blu-ray 光碟格式的選用附加功能,並且某些可用的功能可能
會延後提供;
-- 本播放機並不支援所有新的和現有的光碟格式版本;
-- 可能會對新的和現有的光碟格式進行修正,變更,更新,改良及/或補充;
-- 一些光碟的生產方式使得在播放期間只允許特定或有限的操作和功能;
-- 一些功能可能是在生產本播放機後新增的選用附加功能,並且某些可用的功能可能會延後提供
-- 帶有 BD-ROM,BD-RE/-R,DVD-VIDEO,DVD-RW/-R,DVD+RW/+R 和 CD-RW/-R 標誌的
一些光碟可能仍然是非標準化光碟;
-- 一些光碟可能無法播放,具體視其實體狀態或錄製條件而定;
-- 在製作 Blu-ray 光碟,DVD 軟件及/或生產光碟時可能會出現問題和發生錯誤;
-- 本播放機的操作方式與其他標準 DVD 播放機或其他 AV 裝置不同;或
-- 出於本使用手冊說明的原因和 SAMSUNG 客戶服務中心發現和公佈的其他原因。
• 如果您遇到光碟相容性或播放機操作問題,請與 SAMSUNG 客戶中心聯絡。
也可以與 SAMSUNG 客戶中心聯絡以取得本播放機的可能更新。
• 有關播放限制以及光碟相容性的其他資訊,請參閱本使用手冊的「預防措施」,「在閱讀使用手冊之
前」和「光碟類型和特性」等章節。
• 對於 Blu-ray 光碟播放機前進式掃描輸出:消費者應注意到,並不是所有的高清晰度電視機都與此產
品完全相容,與此產品的連接可能造成畫面失真。如果出現前進式掃描畫面的問題,建議使用者將連
接轉換到「標準清晰度」輸出。如果我們的電視機與本產品出現相容問題,請與 SAMSUNG 客戶服
務中心聯絡。
繁體中文
2015-02-04 오후 3:16:49
附錄
複製保護
• 因為已核准將 AACS(進階儲存內容系統)用作 Blu-ray 光碟格式的內容保護系統(類似於對 DVD
格式使用 CSS(內容加擾系統)),對受 AACS 保護的內容存在播放,類比信號輸出等特定限制。
本產品的操作和對本產品的限制可能會因購買時間而異,因為在生產本產品之後,AACS 可能會採用
及/或變更這些限制。此外,BD-ROM 標記和 BD+ 另用作 Blu-ray 光碟格式的內容保護系統,它施
加特定限制,包括對 BD-ROM 標記及/或 BD+ 受保護內容的播放限制。若要取得 AACS,BD-ROM
標記,BD+ 或本產品的相關詳細資訊,請與 SAMSUNG 客戶中心聯絡。
• 許多 Blu-ray/DVD 都進行了編碼以達到複製保護的目的。因此,僅直接將您的播放機與您的電視相
連接,而不要連接到 VCR。與 VCR 連接將導致受版權保護之 Blu-ray 光碟/DVD 光碟的畫面失真。
• 在美國著作權法和其他國家/地區的著作權法保護下,如果未經授權使用,顯示,散佈或修訂電視節
目,錄影帶,Blu-ray 光碟,DVD 和其他材料,則您必須承擔民事及/或刑事責任。
• Cinavia 聲明:本產品使用 Cinavia 技術來限制使用某些商業製造的電影和視訊及其聲道的未經授權
副本。當偵測到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或複製動作將會中斷。
Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www.cinavia.
com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信片寄往:Cinavia
Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA。
本產品採用 Verance Corporation 許可的專利技術,並且受美國專利 7,369,677 和其他在美國及
全球已頒發或正在申請的專利保護,並且此類技術的特定方面受版權和商業機密保護。Cinavia 是
Verance Corporation 的商標。Copyright 2004-2015 Verance Corporation.All rights reserved by
Verance.禁止還原工程或反向組譯。
網絡服務免責聲明
透過本裝置存取的所有內容和服務屬於協力廠商,並且受版權,專利權,商標或其他智慧財產法保護。
提供此等內容僅供個人非商業使用。除內容所有者或服務提供者授權的方式之外,不得任何其他方式使
用任何內容或服務。除非適用的內容所有者或服務提供者事先明確授權,您不得修改,複製,重新發
佈,上載,張貼,傳送,翻譯,銷售,建立衍生作品,開發或以任何方式或媒體散佈透過本裝置顯示的
任何內容或服務。
60
[BD-J7500-ZK]AK68-02613V-00HK-.indd 60
繁體中文
2015-02-04 오후 3:16:50
07
附錄
協力廠商內容和服務「按原樣」提供。對於此處提供的內容,SAMSUNG 不提供針對任何目的明示或
暗示的保證。SAMSUNG 明確拒絕任何暗示的保證,包括但不限於適銷性或適合特定用途的保證。
SAMSUNG 不保證透過本裝置可取得之內容或服務的準確性,有效性,及時性,合法性或完整性;在
任何條件下,包括疏忽所致,無論是合同行為還是侵權行為,對於您或協力廠商使用內容或服務導致的
任何直接,間接,偶然,特殊或附帶性毀損,及律師費,開支或任何其他與此有關的損失或包含其中的
資訊,SAMSUNG 將不承擔賠償責任,即使 SAMSUNG 事先已被告知發生此等損失的可能性。
協力廠商服務隨時會中止或中斷,Samsung 不表示或保證任何內容或服務的可用期限。對於協力廠商
透過網絡和傳輸設備傳送的內容和服務,Samsung 無法控制。在不影響本免責聲明一致性的前提下,
對於透過本裝置取得之任何內容或服務的中斷或中止,Samsung 明確拒絕承擔任何責任。
Samsung 也不對內容和服務的相關客戶服務承擔責任。任何與內容或服務相關的無服務問題或要求,
都應該直接轉至各自內容和服務的提供者。
許可
• 在 Dolby Laboratories 的授權下製造。Dolby 和雙 D 標誌是 Dolby Laboratories
的商標。
• 若要瞭解 DTS 專利,請造訪 http://patents.dts.com。在取得 DTS Licensing
Limited 授權的條件下製造。DTS、DTS-HD、符號以及 DTS 和符號一起是 DTS, Inc.
的註冊商標,DTS-HD Master Audio 是 DTS, Inc. 的商標。© DTS, Inc. 版權所有。
• DivX
-- 本 DivX Certified® 裝置已通過嚴格的測試,確保它可以播放 DivX® 視訊。
-- 若要播放購買的 DivX 電影,請先在 vod.divx.com 中註冊您的裝置。請在裝置的設定功能表的
DivX VOD 區段找到註冊碼。
-- 取得 DivX Certified® 以播放高達 HD 1080p 的 DivX® 視訊,包括優質內容。
-- DivX®、DivX Certified® 與相關的徽標是 DivX, LLC 的商標,並在授權下使用。
-- 受下列一個或多個美國專利權保護: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
-- 本裝置支援 DivX Plus Streaming®,可讓使用先進的功能 (多種語言的字幕、多音軌、章節、流暢
快進/倒帶等),欣賞串流傳輸到本裝置的高清電影和電視節目。
61
[BD-J7500-ZK]AK68-02613V-00HK-.indd 61
繁體中文
2015-02-04 오후 3:16:50
附錄
• 詞語 HDMI 和 HDMI High-Definition Multimedia Interface 以及 HDMI 標記是
HDMI Licensing LLC 在美國以及其他國家/地區的商標或註冊商標。
• Oracle 和 Java 是 Oracle 及/或其子公司的註冊商標。其他名稱可能是其各自所有者的商標。
• 開源軟件許可注意事項
-- 使用開源軟件時,產品功能表上會有 Open Source Licence (開源軟件許可) 項目。
• Blu-ray Disc™、Blu-ray™ 和標記是 Blu-ray Disc Association 的商標。
62
[BD-J7500-ZK]AK68-02613V-00HK-.indd 62
繁體中文
2015-02-04 오후 3:16:50
規格
HDMI
視訊
音頻
音頻輸出
7.1 聲道
數碼音頻輸出
乙太網路
無線 LAN
網絡
安全
WPS(PBC)
附錄
USB
1.7 公斤
430 (寬) X 201 (深) X 46 (高) 毫米
+5℃ 至 +35℃
10 % 至 75 %
USB 2.0
最大 5V 500mA
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
PCM, 位元流
左前/右前,中間,重低音揚聲器,左環繞聲/右環繞
聲,左後環繞聲/右後環繞聲
光纖
100BASE - TX 端子
內建
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
支援
07
一般
重量
尺寸
工作溫度範圍
工作濕度範圍
類型 A
DC 輸出
• 不支援等於或低於 10Mbps 的網路速度。
• 設計和規格可能會隨時變更,恕不另行通知。
• 如需電源和功耗資訊,請參閱貼在播放機上的標籤。
• 重量和尺寸均為近似值。
63
[BD-J7500-ZK]AK68-02613V-00HK-.indd 63
繁體中文
2015-02-04 오후 3:16:50
聯絡 SAMSUNG WORLD WIDE
如果您有任何關於 Samsung 產品的問題或意見,請聯絡 SAMSUNG 客戶服務中心。
Country
` China
CHINA
Contact Centre 
400-810-5858
HONG KONG
(852) 3698 4698
MACAU
0800 333
` S.E.A
SINGAPORE
1800-SAMSUNG(726-7864)
AUSTRALIA
1300 362 603
NEW ZEALAND
0800 726 786
VIETNAM
1800 588 889
THAILAND
0-2689-3232,
1800-29-3232
MYANMAR
MALAYSIA
INDONESIA
+95-01-2399-888
1800-88-9999
603-77137477 (Overseas contact)
021-56997777
08001128888
Web Site
www.samsung.com/cn/
support
www.samsung.com/hk/
support (Chinese)
www.samsung.com/hk_en/
support (English)
www.samsung.com/support
www.samsung.com/sg/
support
www.samsung.com/au/
support
www.samsung.com/nz/
support
www.samsung.com/vn/
support
www.samsung.com/th/
support
www.samsung.com/support
www.samsung.com/my/
support
www.samsung.com/id/
support
PHILIPPINES
1-800-10-7267864 [PLDT]
02-4222111 [Other landline]
TAIWAN
0800-329999
JAPAN
0120-363-905
www.samsung.com/jp/
support
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
www.samsung.com/in/
support
` S.W.A
INDIA
BANGLADESH
09612300300
SRI LANKA
94117540540
EGYPT
08000-7267864
16580
` MENA
ALGERIA
021 36 11 00
IRAN
021-8255 [CE]
SAUDI ARABIA
8002474357
www.samsung.com/ph/
support
www.samsung.com/tw/
support
www.samsung.com/in/
support
www.samsung.com/support
www.samsung.com/eg/
support
www.samsung.com/n_
africa/support
www.samsung.com/iran/
support
Country
Contact Centre 
PAKISTAN
0800-Samsung (72678) TUNISIA
80-1000-12 U.A.E
OMAN
KUWAIT
BAHRAIN
800-SAMSUNG (800 - 726 7864)
800-SAMSUNG (800 - 726 7864)
183-CALL (183-2255)
8000-GSAM (8000-4726)
QATAR
800-CALL (800-2255)
TURKEY
444 77 11
JORDAN
0800-22273
06 5777444
SYRIA
18252273
MOROCCO
080 100 22 55
` Africa
SOUTH AFRICA
0860 SAMSUNG (726 7864)
NAMIBIA
08 197 267 864
BOTSWANA
ZAMBIA
MOZAMBIQUE
847267864 / 827267864
Ghana
0800-10077
0302-200077
Cote D’Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
www.samsung.com/Levant/
support (English)
www.samsung.com/Levant/
support (English)
www.samsung.com/n_
africa/support
www.samsung.com/support
262508869
0800-726-7864
www.samsung.com/africa_
en/support
8000 0077
www.samsung.com/africa_
fr/support
800-00-0077
7095-0077
0800 545 545
0800 300 300
0800 755 755 / 0685 889 900
9999
BURUNDI
200
SUDAN
1969
DRC
www.samsung.com/ae/
support (English)
www.samsung.com/ae_ar/
support (Arabic)
www.samsung.com/tr/
support
0211 350370
23052574020
NIGERIA
www.samsung.com/n_
africa/support
8007260000
MAURITIUS
REUNION
Web Site
www.samsung.com/pk/
support
www.samsung.com/support
499999
www.samsung.com/sa/
support
www.samsung.com/sa_en/
support (English)
AK68-02613V-01
AK68-02613V-01
AK68-02613V
[BD-J7500-ZK]AK68-02613V-00HK-.indd 64
2015-02-04 오후 3:16:51
Download PDF

advertising