Samsung | HT-E6750W | Samsung HT-E6750W User Manual

HT-E6750W
7.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device
and shall stay readily operable at any time.
• This apparatus shall always be connected
to an AC outlet with a protective grounding
connection.
• To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily
operable.
| 2 English
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
This symbol indicates important
instructions accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
Disc Storage & Management
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and store
vertically.
Handling Cautions
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the
same wall socket. Ovedrloading a socket can
cause it to overheat, resulting in a fire.
• Maintenance of the Cabinet
-- Before connecting other components to this
product, be sure to turn them off.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety information
before using the 3D function.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop viewing
3D TV, remove the 3D Active Glasses, and rest.
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses, sunglasses,
protective goggles, etc.)
English
3|
Safety Information
`` Do not keep in direct sunlight.
01
• Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
-- When cleaning, wipe gently from the inside to
the outside of the disc.
-- Disc Storage
-- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service Center for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
Safety Information
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around
may cause you to bump into objects, trip, and/or
fall, and cause serious injury.C
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product’s HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing the
3D content.
• The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for proper
output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46 inch screen, stay 3.5
meters from the screen.
-- Place the 3D video screen at eye level for the
best 3D picture.
• When the product is connected to some 3D
devices, the 3D effect may not function properly.
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks
of the Blu-ray Disc Association.
Copyright
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
| 4 English
License
• Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
• Manufactured under License under U.S.
Patent Nos: 5,956,674; 5,974,380; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
• ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information
on how to complete your registration.
DivX Certified® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under License.
Covered by one or more of the following U.S.
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274
• This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
• Blu-ray Disc™, Blu-ray™, and the logos are
trademarks of Blu-ray Disc Association.
• iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other
countries.
• This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.”
English
5|
Safety Information
• Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source License Notice
-- In the case of using open source software,
Open Source Licenses are available on the
product menu.
01
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
This product incorporates proprietary technology
under License from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other
U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection
for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. All
rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
Contents
SAFETY INFORMATION
2
3
3
3
4
4
Warning
Disc Storage & Management
Handling Cautions
Using the 3D function
Copyright
License
7
8
11
12
12
13
Disk and Format Compatibility
Logos of Discs the product can play
Accessories
Front Panel
Rear Panel
Remote Control
GETTING STARTED
CONNECTIONS
15
15
16
16
17
19
19
19
19
20
20
20
21
21
21
21
22
22
22
Attaching the Toroidal Ferrite Core to the
Power Cord of the Main Unit
Connecting the Speakers
Speaker Components
Installing the Speakers on the Tallboy
Stand
Connecting The Speakers
Connecting the FM Antenna
Connecting to an iPod/iPhone
Using a USB Cable
Using a Dock
Connecting to a TV
Method 1 Connecting to a TV with an
HDMI Cable - Best Quality (Recommended)
Method 2 Connecting to a TV with a
Video Cable - Good Quality
Connecting to External Devices
Method 1 HDMI IN : Connecting to an
External Component with an HDMI Cable
Method 2 OPTICAL : Connecting an
External Digital Audio Component
Method 3 AUX IN : Connecting an
External Analog Component
Connecting to a Network Router
Wired Network
Wireless Network
| 6 English
SETTINGS
23
The Initial Settings Procedure
25
26
27
32
32
37
The Home Screen
Accessing the Settings Screen
Settings Menu Functions
Auto Sound Calibration
Networks and the Internet
Upgrading Software
MEDIA PLAY
39
40
40
41
41
41
42
42
44
46
49
49
51
52
The AllShare Play Screen
Playing Files on a USB Storage Device or
iPod/iPhone
iPod/iPhone Models You Can Use with
This Product
The Function Screen
Playing Commercial Video Discs
Playing Commercial Audio Discs
Playing a Disc with User Recorded
Content
Using the AllShare Network Function
Controlling Video Playback
Controlling Music Playback
Playing Photo Contents
Using the Tools Menu when a File is
Highlighted
Listening to Radio
Using the Special Effects Remote Control
Buttons
NETWORK SERVICES
54
56
Using Smart Hub
BD-LIVE™
APPENDIX
57
63
66
Additional Information
Troubleshooting
Specifications
Getting Started
Disk and Format Compatibility
Disc Type
Blu-ray Disc
3D Blu-ray Disc
VIDEO
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
Details
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVDR/+R discs that have been
recorded and Finalized, or a USB storage media containing DivX, MKV, MP4
contents.
MUSIC
CD-RW/-R, DVD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R
media containing MP3 or WMA contents.
PHOTO
CD-RW/-R, DVD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R
media containing JPEG contents.
| NOTE |
\\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\\ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
\\ Your product will not play content that has been recorded on a DVD-R at a Bitrate that exceeds 10 Mbps.
\\ Your product will not play content that has been recorded on a BD-R or USB device at a Bitrate that exceeds 30 Mbps.
\\ Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/MVDisc, etc
| NOTE |
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
• 3.9 GB DVD-R Disc
for Authoring.
\\ This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or
limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
\\ Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc
formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the
manufacture of discs.
\\ Please contact the SAMSUNG Customer Care Center, if you have questions or encounter difficulty when playing Blu-ray Disc,
DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.
\\ Some commercial discs and DVD discs purchased outside your region may not play on this product.
English
7|
Getting Started
Media
02
Disc types and contents your product can play
Getting Started
Logos of Discs the product can play
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Disc Type
Blu-ray Disc
DVD-VIDEO
Region
Code
Area
A
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
B
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central and
South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
| NOTE |
\\ If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
| 8 English
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
DTS
DivX
PAL broadcast system in
U.K, France, Germany, etc.
Java
Supported Formats
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3
MP3
MP3
-
WMA
Compliant with
WMA version 10
* S ampling rates (in
kHz) - 8, 11, 16,
22, 32, 44.1, 48
* B itrates - All
Bitrates in the
range 5kbps to
384kbps
*.wma
WMA
Video File Support
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
ASF
*.mp4
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
TS
Video Codec
Resolution
Frame rate
(fps)
Bitrate (Mbps)
Audio Codec
DivX 3.11/4.x
/5.1/6.0
H.264 BP/MP/HP
MPEG4 SP/ASP
DivX 3.11/4.x
/5.1/6.0
H.264 BP/MP/HP
MPEG4 SP/ASP
DivX 3.11/4.x
/5.1/6.0
H.264 BP/MP/HP
MPEG4 SP/ASP
Window Media
Video v9
H.264 BP/MP/HP
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
1920x1080
1920x1080
6 ~ 30
6 ~ 30
25
8
MP3
AC3
LPCM
DTS Core
1920x1080
6 ~ 30
8
Getting Started
Container
02
File Extension
1920x1080
1920x1080
6 ~ 30
6 ~ 30
25
8
1920x1080
6 ~ 30
8
1920x1080
1920x1080
6 ~ 30
6 ~ 30
25
8
MP3
AC3
LPCM
WMA
1920x1080
6 ~ 30
25
WMA
1920x1080
1920x1080
6 ~ 30
6 ~ 30
25
8
MP3
AAC
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
MPEG2
1920x1080
24/25/30
25
MPEG1
1920x1080
24/25/30
25
MPEG1
1920x1080
24/25/30
25
MPEG2
1920x1080
24/25/30
25
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24/25/30
25
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
MP3
AC3
LPCM
DTS Core
AAC
AC3
MPEG
LPCM
AC3
MPEG
LPCM
AAC
AC3
AAC
MP3
DD+
`` Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be played if its
content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
-- Files having higher bit or frame rates than standard may stutter when played back.
-- The Seek (skip) function is not available if the file’s index table is damaged.
-- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
English
9|
Getting Started
`` Video decoder
-- Supports up to H.264 Level 4.1
-- Does not support H.264 FMO/ASO/RS, VC1
SP/MP/AP L4 and AVCHD
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
`` Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA 9 PRO multi-channel
files if the number of channels is more than 2 or
the files require lossless audio decoding.
-- Does not support WMA sampling rate of
22050Hz mono
`` Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
Notes on the USB connection
• Your product supports USB storage media,
MP3 players, digital cameras, and USB card
readers.
• The product does not support folder or file
names longer than 128 characters.
• Some USB/digital camera devices may not be
compatible with the product.
• Your product supports the FAT 16, FAT 32, and
NTFS files systems.
• Connect USB devices directly to the product’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
• The bigger the image resolution, the longer the
image takes to display.
• This product cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
• Your product only supports video that is under
30fps (frame rate).
| 10 English
• Your product only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this product.
• If some USB devices require excessive power,
they may may be limited by the circuit safety
device.
• If playback from a USB HDD is unstable, provide
addtional power by plugging the HDD into a wall
socket. If the problem continues, contact the
USB HDD manufacturer.
• You must remove the USB storage device safely
(by performing the “Safely Remove USB”
function) to prevent possible damage to the
USB memory.
Press the HOME button to move to the home
menu, press the YELLOW (C) button, and then
press the v button.
• SAMSUNG is not responsible for any data file
damage or data loss.
AVCHD
(Advanced Video Codec High Definition)
• This product can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the “x.v.Color” format.
This product can play back AVCHD discs that
use “x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
| NOTE |
\\ Some AVCHD format discs may not play, depending on
the recording conditions.
\\ AVCHD format discs need to be Finalized.
\\ “x.v.Color” offers a wider Color range than normal DVD
camcorder discs.
\\ Some DivX, MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
Accessories
02
Check for the supplied accessories below.
Getting Started
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD
TV
1
2
4
5
7
8
DISC MENU
Video Cable
FM Antenna
3
6
9
TITLE MENU
0
ASC microphone
POPUP
MUTE
VOL
S/W LEVEL
FULL SCREEN
TUNING
/ CH
HOME
REPEAT
TOOLS
INFO
EXIT
RETURN
TUNER
MEMORY
A
SMART
B
C
MO/ST
D
SEARCH 2D→3D 3D SOUND
HUB
vTuner
AUDIO
SUBTITLE
SOUND
EFFECT
User Manual
Soft Cloth
iPod Dock
Remote Control/
Batteries (AAA size)
`` Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
`` An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have
failed to read this user manual)
b. you bring the unit to a repair Center and there is no defect in the product (i.e. where you have failed to
read this user manual).
`` The amount of such administration charge will be advised to you before any work or home visit is carried
out.
English
11 |
Getting Started
Front Panel
OPEN/CLOSE
VACUUM
TUBE AMP
VOLUME CONTROL
ENTER
PLAY/PAUSE
DISC TRAY
STOP
FUNCTION
POWER
ASC IN
5V 500mA
DISPLAY
ASC IN
REMOTE CONTROL SENSOR
USB HOST
| NOTE |
\\ If Cellular phone or mobile device is near vacuum tube amp, or put other electronic products on the top of the product would
cause noise from the audio.
\\ Please be careful that children do not touch the product's surface When the set is on working. It would be hot.
\\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\\ When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or the
remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the v button.
AUX
IN
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
OPTICAL
SPEAKER IMPEDANCE : 3
iPod
LAN
HDMI OUT
WIRELESS
1
HDMI IN
DIGITAL
AUDIO IN
2
Rear Panel
AUX
IN
SPEAKERS OUT
COOLING FAN
CENTER
FRONT
SUBWOOFER FRONT
OPTICAL
iPod
LAN
WIRELESS
iPod
HDMI OUT
1
HDMI IN
2
FRONT
DIGITAL
AUDIO IN
VIDEO OUT
AUX IN
AUX
IN
SPEAKERS OUT
CENTER
FM ANTENNA
FM ANT
FRONT TOP
SPEAKER IMPEDANCE : 3
SUBWOOFER FRONT
VIDEO
OUT
FRONT TOP
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
OPTICAL
iPod
LAN
WIRELESS
SPEAKER OUTPUT
CONNECTORS LAN TERMINAL
HDMI OUT
1
HDMI IN
2
DIGITAL
AUDIO IN
HDMI OUT
TX CARD CONNECTION
(WIRELESS)
HDMI IN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
| NOTE |
\\ Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not obstruct
the cooling fan or ventilation holes.
| 12 English
Remote Control
02
Tour of the Remote Control
To change to TV mode, press the
TV button.
To change to Home Cinema,
press the BD button.
Press numeric buttons to operate
options.
Press to view the disc menu.
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD
TV
2
3
4
5
6
7
8
DISC MENU
9
TITLE MENU
0
POPUP
Press to pause a disc.
Cut off the sound temporarily.
Press this to see the full screen
on a TV.
Press to use the Tools menu.
MUTE
VOL
S/W LEVEL
FULL SCREEN
TUNING
/ CH
HOME
REPEAT
TOOLS
INFO
RETURN
EXIT
Select on-screen menu items and
change menu value.
Return to the previous menu.
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
SMART
Press to use Smart Hub.
vTuner
Press this to use the vTuner.
Press to search contents.
Selects the disc Audio language.
Use to enter the Popup menu/
Title menu.
Press to search backwards or
forwards.
Press to stop/play a disc.
Press to move to the Home screen.
Press to select Blu-ray's mode
(HDMI1, AUX, BD/DVD, etc.).
or
Press to select TV's video mode.
Set a Sleep time to shut off the
product.
To open and close the disc tray.
1
Press to skip backwards or forwards.
Adjust the volume.
Getting Started
Turn the product on and off.
A
B
TUNER
MEMORY
MO/ST
C
D
SEARCH 2D→3D 3D SOUND
Search for active FM stations and
to change channels.
Use to adjust the level of the
subwoofer.
Allows you to repeat a title,
chapter, track or disc.
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Press to exit the menu.
Use to set a preset radio frequency.
Select MONO or STEREO for radio
broadcasts.
HUB
AUDIO
SUBTITLE
SOUND
EFFECT
Press to apply 3D sound effect.
Press to apply sound effects.
Press to enjoy an ordinary 2D video
in 3D mode.
Selects the disc subtitle language.
English
13 |
Getting Started
Installing batteries in the Remote
Control
Battery size: AAA
1
2
| NOTE |
\\ Make sure to match the “+” and “–” ends of the batteries
with the diagram inside the compartment.
\\ Assuming typical TV usage, the batteries last for about
one year.
\\ The remote control can be used up to approximately
7 meters from the product in a straight line.
Setting the Remote Control
You can control certain functions of your TV with
this remote control.
TV Control Codes
Brand
Code
Brand
Code
Admiral
(M.Wards)
A Mark
56, 57, 58
18, 40, 59, 60, 75
01, 15
01, 02, 03, 04, 05,
06, 07, 08, 09, 10, 11,
12, 13, 14
01, 18, 40, 48
Mitsubishi/
MGA
MTC
NEC
Nikei
Onking
Onwa
57, 58, 81
Panasonic
59, 60
18
03
03, 18, 25
97
03
18
46
15
03, 05, 61, 82, 83, 84
62
03
59, 61, 63
03
02, 03, 04, 15, 16, 17,
18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28,
29, 30, 32, 34, 35, 36,
48, 59, 90
40
03
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
19, 65
03
03
06, 40, 56, 59, 66,
67, 68
40
15, 18, 50, 59, 69
45
56, 59, 67, 86
70
59, 61, 87, 88
03, 15, 40
15
01, 15, 16, 17, 37,
38, 39, 40, 41, 42,
43, 44
18
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
40, 54
54
18, 40
Penney
Anam
AOC
Bell & Howell
(M.Wards)
Brocsonic
Candle
Cetronic
Citizen
Cinema
Classic
Concerto
Contec
Coronado
Craig
Croslex
Crown
Curtis Mates
CXC
Daewoo
When operating a TV with the remote control
1 . Press the TV button to set the remote control
to TV mode.
2 . Turn on your TV.
3 . While holding down the POWER button, enter
the code corresponding to your brand of TV.
• If there is more than one code listed for
your TV in the table, enter one at a time to
determine which code works.
• Example : For a Samsung TV
While holding down the POWER button,
use the number buttons to enter 00. If that
does not work, try 15, then 16, etc.
4 . If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
| NOTE |
\\ The remote control may not work on some brands of TV's.
Also, some operations may not be possible, depending on
your brand of TV.
\\ The remote control will work with Samsung TVs by
default.
| 14 English
Daytron
Dynasty
Emerson
Fisher
Funai
Futuretech
General
Electric (GE)
Hall Mark
Hitachi
Inkel
JC Penny
JVC
KTV
KEC
KMC
LG (Goldstar)
Luxman
LXI (Sears)
Magnavox
Marantz
Matsui
MGA
Philco
Philips
Pioneer
Portland
Proton
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
Samsung
18
18, 19, 20, 40, 59, 60
03
03
03
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48,
54, 62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
40
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
Sanyo
Scott
Sears
Sharp
Signature
2000
(M.Wards)
19, 61, 65
03, 40, 60, 61
15, 18, 19
15, 57, 64
Sony
50, 51, 52, 53, 55
Soundesign
Spectricon
03, 40
01
57, 58
SSS
18
Sylvania
18, 40, 48, 54, 59,
60, 62
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
Videch
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
59, 60, 69
Wards
15, 17, 18, 40, 48,
54, 60, 64
Yamaha
18
York
40
Yupiteru
03
Zenith
58, 79
Zonda
01
Dongyang
03, 54
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
03
Position of the product
Center
Subwoofer
Front/
Front Top (R)
Place it on a stand or cabinet shelf, or
under the TV stand.
Selecting the Listening Position
Product
Surround (R)
Front/
Front Top (L)
Surround (L)
Wireless
Receiver Module
The listening position should be
located about 2.5 to 3 times the
distance of the TV's screen size
away from the TV. For example, if
you have a 46 inch screen, locate
the listening position 2.92 to 3.50
meters from the screen.
Front/Front Top
Speakers
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the front speakers so that their tweeters will be at the same height as
your ear. Align the front face of the front/front top speakers with the front face of the
Center speaker or place them slightly in front of the Center speakers.
Center Speaker
It is best to install the Center Speaker at the same height as the front/front top speakers.
You can also install it directly over or under the TV.
Surround
Speakers
Subwoofer
Place these speakers to the side of your listening position. If there isn't enough room,
place these speakers so they face each other. Position them about 60 to 90cm
above your ear, facing slightly downward.
Unlike the front/front top and Center speakers, the surround speakers are used
* mainly for sound effects. Sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
* Surround speakers must be connected to the wireless receiver module.
English
15 |
Connections
Connecting the Speakers
Connections
Speaker Components
SWA-5000
SCREW (5x15): 4EA
SCREW (5x20): 12EA
FRONT/FRONT TOP
STAND BASE
STAND
(L)
(R)
SURROUND
(L)
Wireless Receiver Module
(R)
SPEAKER CABLE
Speaker
Cable (2EA)
FRONT/FRONT TOP
SURROUND
Center
TX Card
SUBWOOFER
Installing the Speakers on the Tallboy Stand
1. Straighten the speaker cable and put it into
the hole on the Stand Base .
2. Turn the Stand Base upside-down and
connect it to the Stand.
1
2
Stand
3. Use the driver to combine the screws (5x20)
on the 3 marked holes.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw (5x15) clockwise into the
hole on the rear of the speaker using a
screwdriver.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
| 16 English
3
4
Speaker
Stand
5
6
Stand Base
Connecting The Speakers
Center Speaker
Red
WIRELESS
HDMI OUT
Front/Front Top
Speaker (L)
SPEAKERS OUT
Subwoofer
Surround
Speaker (L)
Surround
Speaker (R)
CENTER
FRONT
SUBWOOFER FRONT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
Front/Front Top
Speaker (R)
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
iPod
LAN
WIRELESS
Wireless Receiver Module
This product should be connected with the SWA-5000 only.
English
17 |
Connections
LAN
03
1. Match each speaker cable bundle to the correct speaker by matching the
Color coded plug on each bundle to the Colored sticker on the bottom of
each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire,
Black
and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3. Connect the speaker wire plugs to the back of the product by matching
the Colors of the speaker plugs to the Colors of the speaker jacks.
4. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
• The TX card enables communication between the product and the
wireless receiver module.
5. Connect the left and right surround speakers to the wireless receiver
module. Again, match the Color of the plugs to the jacks on the
wireless receiver module.
TX card
6. Plug the power cord of the wireless receiver module into the wall
outlet.
7. Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the
Surround speakers.
Connections
| CAUTION |
\\ If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.
However, when you install it, accessories (nails or screws) and installation is not provided by the company.
\\ Do not let children play with or near the speakers. They could get hurt if a speaker falls.
\\ When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
\\ Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)
of the subwoofer speaker.
\\ Do not hang the subwoofer on the wall through the duct (hole).
\\ Do not insert any other card except the TX card dedicated to the product.
If you insert a different TX card, you can damage the product and may not be able to remove the card easily.
\\ Do not insert the TX card upside down or in the reverse direction.
\\ Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.
\\ The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
\\ For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.
\\ If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.
\\ In 2-CH mode, you will hear no sound from the wireless surround speakers.
| NOTE |
\\ If you place a speaker near your TV set, the screen Color may be distorted because of the magnetic field.
\\ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound
from the speakers may be disrupted because of interference.
\\ If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.8GHz
frequencies near the product, sound from the speakers may be disrupted because of interference.
\\ The maximum transmission distance from the product to the wireless receiver module is about 10m, but may vary depending on your
operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may
not operate at all, because the radio wave cannot penetrate metal.
\\ If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the
product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID
SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
| 18 English
Connecting the FM Antenna
FRONT
SUBWOOFER FRONT
Connections
AUX
IN
SPEAKERS OUT
CENTER
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
OPTICAL
SPEAKER IMPEDANCE : 3
iPod
LAN
HDMI OUT
WIRELESS
1
HDMI IN
DIGITAL
AUDIO IN
2
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
| NOTE |
\\ This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Using a USB Cable
Connect an iPod/iPhone using the USB cable to the front USB port.
ASC IN
5V 500mA
5V 500mA
Using a Dock
To view a video from your iPod on your TV, you must also connect the Video Out jack on the product to
the Video In jack on your TV. See page 20.
AUX
IN
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
OPTICAL
iPod
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
DIGITAL
AUDIO IN
iPod
| NOTE |
\\ Make sure to connect the dock connector so that the label “” faces upward.
03
FM Antenna (supplied)
English
19 |
Connections
Connecting to a TV
Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control,
and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video from the home
cinema.
AUX
IN
VIDEO
OUT
FM ANT
AUX
IN
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
OPTICAL
iPod
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
DIGITAL
AUDIO IN
OPTICAL
HDMI OUT
1
HDMI IN
2
DIGITAL
AUDIO IN
(Cable not supplied.)
Method 2
Method 1
HDMI IN
VIDEO IN
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
| NOTE |
\\ The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu.
\\ Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and
the picture will be distorted on the television.
| 20 English
Connecting to External Devices
ㅈWㄴ
Red
AUX
IN
White
VIDEO
OUT
FM ANT
AUX
IN
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
VIDEO
OUT
OPTICAL
FM ANT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
OPTICAL
iPod
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
1
DIGITAL
AUDIO IN
HDMI IN
DIGITAL
AUDIO IN
2
(Cable not supplied.)
Method 3
(Cable not supplied.)
Method 2
(Cable not supplied.)
Method 1
External Devices
HDMI OUT
OPTICAL OUT
AUDIO OUT
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI
OUT jack on your digital device.  Select the HDMI1 or HDMI2 mode.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
Method 3 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external Analog component.  Select the AUX mode.
• Be sure to match the Colors on the cable plugs to the Colors on the input and output jacks.
| NOTE |
\\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
English
21 |
Connections
R
03
To select the correct mode for an external device, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; R. IPOD ; HDMI1 ; HDMI2 ; FM ; BT
Connections
Connecting to a Network Router
Wireless Network
You can connect your product to your network
router using one of the methods illustrated below.
Wired Network
AUX
IN
SPEAKERS OUT
CENTER
FRONT
SUBWOOFER FRONT
VIDEO
OUT
FM ANT
FRONT TOP
FRONT TOP
SPEAKER IMPEDANCE : 3
Wireless IP sharer
OPTICAL
iPod
LAN
WIRELESS
HDMI OUT
1
HDMI IN
2
DIGITAL
AUDIO IN
Broadband modem
(with integrated router)
Broadband
service
Or
Router
| NOTE |
Broadband
service
Broadband
modem
| NOTE |
\\ Internet access to Samsung’s Software Update server
may not be allowed, depending on the router you use or
your ISP’s policy. For more information, contact your ISP
(Internet Service Provider).
\\ DSL users, please use a router to make a network
connection.
\\ To use the AllShare Play function, you must connect your
PC to your network as shown in the illustrations on the
left.
The connection can be wired or wireless.
| 22 English
Broadband
service
\\ If your wireless IP router supports DHCP, this product can
use a DHCP or static IP address to connect to the wireless
network.
\\ Set your wireless IP router to Infrastructure mode. Ad-hoc
mode is not supported.
\\ The product supports only the following wireless security
key protocols:
--WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK
(TKIP/AES)
\\ Select a channel on the wireless IP router that is not
currently being used. If the channel set for the wireless IP
router is currently being used by another device nearby, it
will result in interference and communication failure.
\\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product
will not support a connection in compliance with new WiFi certification specifications.
\\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP performance,
distance, obstacles, interference by other radio devices,
etc).
Settings
The Initial Settings Procedure
\\ If you skip wireless network setup here, go to "Wireless
Network" on page 33 to set up the product's wireless
network connection later.
5 . The product searches for and then displays all
available wireless router network connections.
Initial Settings > Network Settings (2/5)
2 . Use the ▲▼◄► buttons on the remote
to select the desired language, and then
press the v button twice. The Start screen
appears.
Select your wireless router from the list.
KIMING_VTOWER
TIAS
si-ap
surlwang5
3 . Press the v button to start setup. The Network
Settings screen appears.
Add Network
1/4
Refresh
WPS(PBC)
Previous
Next
Skip
Initial Settings > Network Settings (1/5)
The next step is to set up a wireless network using an
internal LAN Adapter.
Previous
Next
Skip
If you want to connect to your wired network, plug in a
network cable.
6 . Use the ▲▼ buttons to select a router, and
then press the v button. The Next button is
highlighted.
7 . Press the v button to continue. The Security
Key screen appears.
| NOTE |
4 . Press the v button to set up the product's
wired network connecton or select Skip, and
then press the v button to skip network setup.
If you selected Skip, go to Step 12.
\\ If you have a WPS(PBC) compatible router, select
WPS(PBC) instead, press the v button, and then follow the
directions on the screen. When done, go to Step 10.
English
23 |
Settings
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
\\ The product starts the wireless network connection
procedure by default. If you want to set up a wired
connection, select Skip, and then go to "Configuring
Your Network Connection" on page 32 after you have
completed the Initial Settings Procedure.
04
• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
| NOTE |
Settings
Initial Settings > Network Settings (4/5)
Enter security key.
0 entered
-
WPS PIN
a
b
c
d
e
f
1
2
3
Previous
g
h
i
j
k
l
4
5
6
Next
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0


Del.
A/a

Space
Skip
8 . Enter your network's security key. When
done, use the ▲▼◄► buttons to select
Next, and then press the v button.
11 .If there is a software upgrade available,
the product downloads and installs the
upgrade. This can take some time. If there
is no software upgrade available, the "There
are no new software updates for you to
download. You already have the most up
to date version." message appears. Select
Next, and then press the v button. The TV
Aspect Ratio screen appears.
Initial Settings > TV Aspect Ratio
Set to match the type of television connected.
16:9 Original
| NOTE |
16:9 Full
\\ Enter numbers by pressing the number buttons on your
remote.
4:3 Pan-Scan
\\ Enter letters by selecting a letter using the ▲▼◄►
buttons, and then press v button.
\\ To display capital letters (or redisplay small letters if
capital letters are displayed), select A/a, and then press
the v button.
\\ To display symbols and punctuation, select , and then
press the v button. To redisplay letters, select A/a, and
then press the v button.
9 . If the connection is successful, the Connection
Complete screen appears. Select Next, and
then press the v button. The Software Update
screen appears.
| NOTE |
\\ If the connection is not successful, select Next, and then
press the v button. After you have completed the Initial
Settings procedure, go to "Wireless Network" on page 33
to set up the product's wireless network connection.
10 .To upgrade the software, select Update
now, and then press the v button. To skip
the upgrade, select Update later, press the v
button, and go to Step 12.
| NOTE |
\\ If you skipped network set up, you must skip software
upgrade also.
| 24 English
4:3 Letter Box
Select when connecting to a
16:9 TV Screen. All content will
be displayed at original aspect
ratio. Content formatted in 4:3
will be displayed with black
bars on left and right.
Previous
Next
12 .Using the ▲▼ buttons, select the aspect ratio
that matches your screen, select Next, and
then press the v button.
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their orignal 16:9
format and 4:3 pictures (the old, standard
format) in 4:3 pillar box format with black bars
on the left and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their orignal 16:9
format and expands 4:3 pictures to fill the
16:9 screen.
4:3 Letter Box - For older, standard screen
Analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in letter box format
that retains the 16:9 aspect ratio but puts
black bars above and below the picture.
4:3 Pan-Scan - For older, standard screen
Analog TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in Pan-Scan format
that fills the screen, but cuts off the left and
right sides of the picture and enlarges the
middle vertically.
Initial Settings > Auto sound calibration
AllShare Play
Previous
Place calibration
mic. here

User
Play videos or music, or view photos from discs or connected devices.
Next
Skip
2
3
4
1
Smart Hub
13 .The Auto Sound Calibration screen appears.
Plug the ASC microphone into the ASC IN
jack on the product.
14 .Press the v button to select the Next button.
Setting the Auto Sound Calibration function
takes about 3 minutes. Select Next, and then
press the v button.
Initial Settings > Complete

Network Settings

Software Update
-
TV Aspect

Auto sound calibration

Press Smart Hub to
enjoy a variety of
Internet content.
Settings
d WPS(PBC)
5
1
Smart Hub. Starts Smart Hub. From Smart Hub,
you can access YouTube, games, and other apps.
2
AllShare Play. Play videos, photos or music content
from Disc, USB, PC or mobile devices.
3
Function. Select the audio/video input source.
4
Settings. Set various functions to suit your personal
preferences.
5
Displays the Colored buttons on your remote that
you can press to access or perform functions.
Setup completed.
On-Screen Language
Function
OK
Smart Hub
`` Selecting an Option on the Home Screen
15 .The Setup completed screen appears. Check
the settings to confirm they are correct.
Select OK, and then press the v button. The
Home screen appears.
1 . To select an option on the Home screen,
move the cursor using the _+ buttons until it
highlights the option of your choice, and then
press the v button.
| NOTE |
\\ If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 31)
\\ If you use an HDMI cable to connect the product to an
Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+ (HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
English
25 |
Settings
Press Next to set the best speaker
output level.
Press Skip to configure later.
04
Connect the calibration microphone
to the ASC IN jack and set up all
speakers correctly, as shown, before
starting.
Note: Please be aware that this
process outputs a loud test sound
that is needed for proper calibration.
The Home Screen
1/4
Settings
Accessing the Settings Screen
1 . Select Settings on the Home screen, and
then press v. The Settings screen appears.
TV Aspect Ratio
16:9 Original
Smart Hub Screen Size
Audio
BD Wise
Network
System
Support
Size 3
EXIT Button : Press to exit the current menu.
On
Resolution
Auto
Movie Frame (24Fs)
Auto
HDMI Color Format
Auto
HDMI Deep Color
Auto
Progressive Mode
Auto
| NOTE |
\\ The v button on the product's front panel can be used for
same purpose as the v button on the remote control.
Detailed Function Information
FUNCTION
TV
SOURCE
2 . To access the menus, sub-menus, and
options on the
Settings screen,
please refer
RECEIVER
SLEEP
to the remoteBDcontrol
illustration below.
TV
| NOTE |
2
1
3
\\ If you leave the product
the stop6 mode for more than
4 in 5
5 minutes without using it, a screen saver will appear on
7 is left8 in the9screen saver mode for
your TV. If the product
DISC MENU
TITLE MENU
more than 20 minutes, the0powerPOPUP
will automatically turn
off.
Buttons on the Remote Control Used
for the Settings Menu
MUTE
VOL
S/W LEVEL
FULL SCREEN
TUNING
/ CH
HOME
REPEAT
1
TOOLS
INFO
3
EXIT
RETURN
A
SMART
B
TUNER
MEMORY
MO/ST
C
D
4
SEARCH 2D→3D 3D SOUND
HUB
vTuner
AUDIO
SUBTITLE
SOUND
1
HOME Button : Press to move to the Home screen.
2
RETURN Button : Return to the previous menu.
EFFECT
| 26 English
4
3D Settings
Display
2
3
v (Enter) / DIRECTION Button :
~~ Press $%_+ to move the cursor or select
an item.
~~ Press the v button to activate the currently
selected item or confirm a setting.
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the $%_+ buttons to select the
function, menu item, or option.
The explanation will usually appear on the right of
the screen. A short description of each Settings
function starts on the next page. Additional
informaton on some of the functions is also in the
Appendix of this manual.
Settings Menu Functions
Lets you adjust the output of the product to the screen size of
your TV. See page 24, Step 12 for a description of the screen
size options.
Smart Hub
Screen Size
Lets you select the optimal size for the Smart Hub Screen.
BD Wise
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung product and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on in
both the product and TV, the product outputs video at the
video resolution and frame rate of the Blu-ray/DVD Disc.
Resolution
Lets you set the output resolution of the HDMI video signal
to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite
is connected, the resolution supports only 576i/480i. The
number indicates the number of lines of video per frame. The
i and p indicate interlaced and progressive scan, respectively.
The more lines, the higher quality.
Movie Frame
(24Fs)
Setting the Movie Frame (24Fs) feature to Auto lets the product
adjust its HDMI output to 24 frames per second automatically
for improved picture quality if attached to a 24Fs compatible
TV.
• You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
• Movie Frame is only available when the product is in the
HDMI 1080i or 1080p output resolution modes.
HDMI Color
Format
Lets you set the Color space format for the HDMI output to match
the capabilities of the connected device (TV, monitor, etc).
HDMI Deep
Color
Lets you set the product to output video from the HDMI OUT
jack with Deep Color. Deep Color provides more accurate
Color reproduction with greater Color depth.
Progressive
Mode
Lets you improve picture quality when viewing DVDs.
English
27 |
Settings
TV Aspect
Ratio
04
3D Settings
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether to play a Bluray Disc with 3D contents in 3D Mode. If you move to the
Home or Smart Hub Home menu while in 3D mode, the
product will switch to 2D automatically.
Screen Size: Enter the size of the TV attached to the
product. The product will automatically adjust the 3D output
to the screen size of the TV.
Display
Settings
Audio
Speaker
Settings
Auto Sound
Calibration
Equaliser
You can set the speaker options.
The product automatically recognize the sound field optimized
for your environment.
Let you configure the Equaliser settings manually.
Smart Volume
Lets you set the product so that the volume remains stable
when a scene change occurs or when you change the
channel.
Speaker
Selection
Lets you select which speakers you want active, either the
TV's speakers or the Home theatre's speakers.
Audio Return
Channel
Lets you direct the sound from the TV to the Home Cinema
speakers. Requires an HDMI connection and an Audio Return
Channel (ARC) compatible TV.
• When Audio Return Channel set to on, use HDMI Cable to
connect the product to the TV. At this time, optical input
does not work.
• When Audio Return Channel set to auto, use HDMI Cable to
connect the product to the TV. At this time, ARC and optical
input is selected automatically.
Digital Output
Let you set the Digital Output to match the capabilities of the
AV receiver you’ve connected to the product. For more details,
please refer to the digital output selection table. (See page 62)
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
Dynamic
Range Control
Audio Sync
| 28 English
Auto: Automatically controls the dynamic range of Dolby
TrueHD audio, based on information in the Dolby TrueHD
soundtrack. Also turns dynamic range control on for Dolby
Digital and Dolby Digital Plus.
Off: Leaves the dynamic range uncompressed, letting you
hear the original sound.
On: Turns dynamic range control on for all three Dolby
formats. Quieter sounds are made louder and the volume of
loud sounds is reduced.
When the product is attached to a digital TV, lets you adjust
the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
Network
Network
Status
Let you check whether a connection to the network and the
Internet have been established.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the product using a
Peer-to-Peer network, without a wireless router. You can use
the device to control the product.
Soft AP
Lets you connect other types of Wi-Fi devices to the product
wirelessly. Requires that you create a security key which
you must enter into the other Wi-Fi devices when you are
connecting them to the network.
AllShare
Settings
Lets you permit external devices such as smart phones to
connect to the product and share content with or control the
product.
Device Name
Lets you assign an identifying name to the product. You use
this name to identify the product when you are connecting
external Wi-Fi devices (smart phones, tablets, etc.) to it.
BD-Live
Settings
Lets you allow, limit, or prohibit an Internet connection for the
BD-Live service.
English
29 |
Settings
For more information about Network Settings and network
functions, see "Networks and the Internet" starting on page
32.
04
Network
Settings
Settings
System
Initial Settings
Lets you re-run the Initial Settings procedure. See page 23 for
details.
You can connect a wireless USB keyboard or mouse to
the USB port on the front of the product.
Keyboard Settings: Lets you configure a wireless USB
keyboard connected to the product.
| NOTE |
\\ You can use the keyboard only when a QWERTY keyboard screen or
window appears in the Web Browser.
Mouse Settings: Lets you configure a wireless USB mouse
connected to the product. You can use the mouse in the
product's menu in the same way you use a mouse on your
PC.
Device
Manager
`` To use a mouse with the product's menu:
1 . Connect the USB mouse to the product.
2 . Click the primary button you selected in Mouse Settings.
The Simple Menu appears.
3 . Click the menu options you want.
| NOTE |
\\ Depending on the model of the USB HID keyboard and mouse may not
be compatible with your product.
\\ Some HID keyboard keys may not work.
\\ Wired USB keyboards are not supported.
\\ Some applications may not be supported.
\\ If a wireless HID Keyboard does not operate because of interference,
move the keyboard closer to the product.
| 30 English
Anynet+
(HDMI-CEC)
Anynet+ is a convenient function that offers linked operations
with other Samsung products that have the Anynet+ feature
and lets you control those products with one Samsung TV
remote. To operate this function, you must connect this
product to an Anynet+ Samsung TV using an HDMI cable.
Language
You can select the language you prefer for the On-Screen
menu, disc menu, subtitles, etc.
• The language you select for the disc menu, disc audio, or
subtitles will only appear if it is supported on the disc.
The default PIN is 0000. Enter the default PIN to access the
security function if you haven't created your own password.
| NOTE |
\\ When the factory default settings are restored, all the user stored BD
data will be deleted.
You can specify the display brightness and time zone.
General
DivX® Video
On Demand
Support
Front Display: Lets you change the brightness of the front
panel.
Time Zone: You can specify the time zone that is applicable
to your area.
Menu Transparency: Adjust the transparency of the menu
box.
View DivX® VOD Registration Codes to purchase and play
DivX® VOD contents.
Software
Update
For more information about the Software Update function, see
"Upgrading Software" on page 37.
Contact
Samsung
Provides contact information for assistance with your product.
Remote
Management
When activated, lets Samsung Call Center agents diagnose
and fix problems with the product remotely. Requires an active
Internet connection. Remote Management service might not
be available in some countries.
Reset
All settings will revert to the default except for the network
and Smart Hub settings. The default security password is
0000.
English
31 |
Settings
`` If you forget your PIN
1 . Remove any disc or USB storage device.
2 . Press and hold the 5 button on the front panel for 5
seconds or more.
All settings will revert to the factory settings.
04
Security
BD Parental Rating: Prevents playback of Blu-ray Discs
with a rating equal to or above a specific age rating you
enter unless the PIN is entered.
DVD Parental Rating: Prevents playback of DVDs with a
rating above a specific numerical rating you select unless
the PIN is entered.
Change PIN: Change the 4-digit PIN used to access
security functions.
Settings
Auto Sound Calibration
By setting the Auto Sound Calibration (ASC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 7.1-channel sound field optimized for
your environment.
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
54~56. Instructions for configuring the network
connection start below.
ASC IN
5V 500mA
ASC
microphone
Auto Sound Calibration Mode
You will hear either the Auto Sound Calibration
mode or the User Speaker Settings.
• Off: You will hear sound in the Speaker Setting
value.
• On: You will hear sound in the Auto Sound
Calibration mode.
Measurement
You will hear either the Auto Sound Calibration
mode or the User Speaker Settings.
1 . Plug the ASC microphone into the ASC IN
jack.
2 . Place the ASC microphone at the listening
position.
• Auto Sound Calibration will be automatically
set up in the following sequence:
Front L  Center  Front R  Surround
R  Front Top R  Front Top L 
Surround L  Subwoofer
• Press the RETURN (') button to cancel
the Auto Sound Calibration Setting.
| 32 English
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
1 . In the Home screen, select Settings, and
then press the v button.
2 . Select Network, and then press the v button.
3 . Select Network Settings, and then press the
v button.
4 . Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 33.
Wired Network
❏❏
Wired – Automatic
After following Steps 1 to 3 above:
1 . Select Start in the Network Settings screen,
and then press the v button. The product
detects the wired connection, verifies the
network connection and then connects to the
network.
❏❏
Wired - Manual
< Getting the Network Settings Values >
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
04
After following Steps 1 to 3 above:
• Windows XP
1 . Select Start in the Network Settings screen,
and then press the v button. The Network
Status screen appears. The product attempts
to verify the network connection and fails.
1 . Right click the Network icon on the bottom
right of the Windows desktop.
Settings
2 . In the pop-up menu, click Status.
3 . On the dialog that appears, click the Support
tab.
4 . On the Support tab, click the Details button.
Network Settings
5 . The Network settings are displayed.
Wireless network disconnected
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Unable to connect to wireless router. Try the following: check
that the router is turned on, and if it is, try turning it off and on
again. Check if you need to enter a security key to use the router.
Previous
IP Settings
Retry
OK
2 . Select IP Settings on the right of the screen,
and then press v button.
The IP Settings screen appears.
3 . Select the IP Mode field, and then set it to
Manual.
4 . Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
• Windows 7
1 . Click the Network icon on the bottom right of
the Windows desktop.
2 . In the pop-up menu, click Network and
Sharing Center.
3 . On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4 . On the Support tab, click the Details button.
The Network settings are displayed.
| NOTE |
\\ Depending on your Windows version, the information may
differ.
| NOTE |
Wireless Network
\\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on this page.
You can setup a wireless network connection in
three ways:
5 . When done, highlight OK, and then press
v button. The product verifies the network
connection and then connects to the
network.
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
English
33 |
Settings
❏❏
Wireless (General) - Automatic
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 32.
1 . Select Start in the Network Settings screen,
and then press the v button.
The product searches for and then displays a
list of the available networks.
Network Settings
Select your wireless router from the list.
iptime23
ELT
JSY
KT_WLAN_C361
Mirhenge_edu
SO070VOIP
1/10
Refresh
WPS(PBC)
Previous
Next
Cancel
2 . Select the desired network, and then press
the v button.
3 . Select Next, and then press the v button
again.
4 . On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
5 . When done, select Next at the right of the
screen. The product verifies the network
connection and then connects to the
network.
| NOTE |
\\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
❏❏
Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After folloiwng Steps 1 to 3 in "Configuring Your
Network Connection" on page 32.
| 34 English
1 . Select Start in the Network Settings screen,
and then press the v button. The product
searches for and then displays a list of the
available networks.
2 . Select the desired network or the Add
Network, and then press the v button.
3 . Select Next, and then press the v button
again.
4 . If you select the Add Network, enter your
wireless router's name to connect.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
Select Next, and then press the v button
again. You can select security type, and then
select Next, and then press the v button
again.
5 . On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the v button.
6 . When done, select Next at the right of the
screen, and then press the v button.
7 . The Network Status screen appears.
The product attempts to verify the network
connection and fails.
8 . Select IP Settings on the right of the screen,
and press the v button. The IP Settings
screen appears.
9 . Select the IP Mode field, and then set it to
Manual.
10 .Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
| NOTE |
\\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 33.
11 .When done, highlight OK, and then press v
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it is
done, highlight OK, and then press v button.
❏❏
WPS(PBC)
2 . Press the BLUE (D) button on the remote
control.
3 . Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
1 . Turn on the Wi-Fi direct device and activate its
Wi-Fi Direct function.
2 . In the Home screen, select Settings, and
then press the v button.
3 . Select Network, and then press the v button.
4 . Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
Wi-Fi Direct
Device
Name : [HTS]E6750W
Display
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Refresh
System
Close
Support
m Move
Through the Wi-Fi Device
1 . On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2 . When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the v button to accept.
3 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Product Using PBC
1 . Select the Wi-Fi Direct device you want to
connect to this product, and then press the v
button. The PBC/PIN pop up appears.
2 . Select PBC, and then press the v button. The
PBC pop-up appears.
3 . Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Product Using a PIN
Disconnected
Network
Settings
Each is covered below.
1 . Open the Home screen.
Audio
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
04
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
5 . You have three ways to complete the Wi-Fi
connection:
" Enter ' Return
1 . Select the Wi-Fi Direct device you want to
connect to this product, and then press the v
button. The PBC/PIN pop up appears.
2 . Select PIN, and then press the v button. The
PIN pop-up appears.
3 . Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
English
35 |
Settings
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
| NOTE |
\\ The wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
Soft AP
Soft AP lets you connect other Wi-Fi devices to
your network through the product and lets them
access the Internet.
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
1 . In the Home screen, select Settings, and
then press the v button.
2 . Select Network, and then press the v button.
3 . Select Soft AP, and then press the v button.
4 . Select On or Off, and then press the v button.
< To Set the Soft AP Security Key >
1 . On the Soft AP screen, select Security Key,
and then press the v button. The Security Key
screen appears.
2 . On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the v button.
3 . When done, use the ▲▼◄► buttons to
move to DONE at the bottom of the screen,
and then press the v button.
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
| 36 English
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1 . In the Home screen, select Settings, and
then press the v button.
2 . Select Network, and then press the v button.
3 . Select AllShare Settings, and then press the
v button.
4 . Select a device, and then press the v button.
The AllShare Settings pop-up appears.
5 . Select Allow, Deny, or Delete from List, and
then press the v button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 39~40.
Upgrading Software
1 . In the Home menu, select the Settings, and
then press the v button.
6 . If you select Don’t update, the product
cancells the upgrade.
2 . Select Support, and then press the v button.
By USB
3 . Select Software Update, and then press the
v button.
4 . Select one of the following methods:
• Online
• By USB
• By Disc
• By downloaded
• Standby Mode upgrade
5 . Press the v button.
Directions for each method begin below.
| NOTE |
\\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\\ Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a software upgrade.
\\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
Online
Your product must be connected to the Internet to
use the Online function.
1 . Select Online, and then press the v button.
The Connecting to Server message appears.
2 . If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3 . When the download is complete, the Upgrade
Query window appears with three choices:
Update now, Update later or
Don’t update.
1 . Visit www.samsung.com.
2 . Click SUPPORT on the top right of the page.
3 . Enter the product's model number into the
search field, and then click Find Product.
4 . Click Get downloads in the Center of the
page below the Downloads header.
5 . Click Firmware in the Center of the page.
6 . Click the ZIP icon in the File column on the
right side of the page.
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 . Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 . Copy the folder to a USB flash drive.
10 .Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
11 .In the product’s menu, go to Settings >
Support > Software Update.
12 .Select By USB.
| NOTE |
\\ There should be no disc in the product when you upgrade
the software using the USB Host jack.
\\ When the software upgrade is done, check the software
details in the Software Update menu.
\\ Do not turn off the product during the software upgrade.
It may cause the product to malfunction.
\\ Software upgrades using the USB Host jack must be
performed with a USB flash memory stick only.
English
37 |
Settings
• Never turn the product off or back on manually during
the update process.
5 . If you do not make a selection in one minute
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
04
The Software Update menu allows you to
upgrade the product’s software for performance
improvements or additional services.
4 . If you select Update now, the product
upgrades the software, turns off, and then
turns on automatically.
Settings
By Disc
1 . Visit www.samsung.com.
2 . Click SUPPORT on the top right of the page.
3 . Enter the product's model number into the
search field, and then click Find Product.
4 . Click Get downloads in the Center of the
page below the Downloads header.
4 . When the update is complete, the product
turns off automatically, and then turns on.
| NOTE |
\\ When the system upgrade is done, check the software
details in the Software Update menu.
\\ Do not turn off the product during the software upgrade.
It may cause the product to malfunction.
5 . Click Firmware in the Center of the page.
Standby Mode upgrade
6 . Click the ZIP icon in the File column on the
right side of the page.
8 . Unzip the zip archive to your computer. You
should have a single .RUF file.
You can set the Standby Mode upgrade function
so that the product downloads new upgrade
software when it is in Standby mode.
In Standby mode, the product is off, but its
Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
9 . Write the RUF file onto a disc. We recommend
a CD-R or DVD-R.
1 . Press the ▲▼ buttons to select Standby
Mode upgrade, and then press the v button.
10 .Finalize the disc before you remove it from
your computer.
13 .Select By Disc.
2 . Select On or Off.
If you select On, the product will automatically
download new upgrade software when it
is in Standby mode with the power off. If
it downloads new upgrade software, the
product will ask you if you want to install it
when you turn the product on.
| NOTE |
| NOTE |
\\ When the system upgrade is done, check the software
details in the Software Update menu.
\\ To use Standby Mode upgrade function, your product
must be connected to the Internet.
\\ Do not turn off the product during the Software Update.
It may cause the product malfunction.
\\ If this function does not appear, you can upgrade to the
latest software and use it.
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
11 .Insert the disc into the product.
12 .In the product’s menu, go to Settings >
Support > Software Update.
By downloaded
The By downloaded option lets you upgrade using
a file the product downloaded earlier but you
decided not to install immediately.
1 . If upgrade software has been downloaded,
you will see the software version number to
the right of By downloaded.
2 . Select By downloaded, and then press the v
button.
3 . The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
| 38 English
Media Play
❏❏
To access the AllShare Play screen, select the
AllShare Play icon on the Main screen, and then
press the v button.
Using the AllShare Play Screen
AllShare Play / My List /
IMAGE
IMAGE
11
IMAGE 1
Videos
Photos
Music
IMAGE 12
IMAGE
Recently
played
IMAGE 2
IMAGE
IMAGE
IMAGE
23 3
IMAGE 3
Recently played files will be displayed here.
IMAGE
IMAGE
IMAGE
34 4
IMAGE 4
IMAGE
IMAGE
55
IMAGE 4
What's
New
IMAGE
5
Latest Updated 29.Jun.2011
IMAGE
IMAGE
IMAGE
56 6
IMAGE 6
IMAGE 6
SAM_0001
View More
SAM_0002
SAM_0003
SAM_0004
2 . Use the ▲▼ buttons to select Videos,
Photos, or Music, and then press the v
button. The first source selection on the right
side is highlighted.
| NOTE |
\\ Sources displayed for each content type may differ.
SAM_0005
Playlist
No playlists have been created.
Create a playlist to quickly and easily access your content.
a Login ' Return
When the AllShare Play screen appears, it displays
My List and a list of content types - Videos,
Photos, and Music - on the left side. On the right,
it displays, by default, the content in My List: a
list of recently played or viewed items, a list of the
newest items you have viewed or listened to, and
your most recent Playlist. If you have never played
or viewed any items, or created a Playlist, this area
will be empty.
❏❏
1 . Make sure that the source of the content
you want to play or view is connected to or
inserted into the product.
3 . Use the ▲▼ buttons to select the source of
the content, and then press the v button.
IMAGE 2
My List
Playing Video, Photo, or Music Content
Playing My List Items
To play displayed My List items, you must have
the source of the items connected to or inserted
in the product. For example, if recently played My
List photos came from a DVD disc, you must have
that disc in the product to view them.
4 . To control the playing of Videos, Photos, or
Music, see:
• Controlling Video Playback on page 44.
• Controlling Music Playback on page 46.
• Playing Photo Contents and Using the Tools
Menu when a File is Highlighted on pages
49~51.
| NOTE |
\\ Depending on how and when you attach a content source
to the product and the content type, the product may
display a different series of screens to start playback.
For alternative playback methods see:
• Playing Files on a USB Storage Device or iPods/iPhone
on page 40.
• Playing Commercial Video Discs on page 41.
• Playing Commercial Audio Discs on page 41.
• Playing a Disc with User Recorded Content on page 42.
To play or view My List items, perform one of the
actions below:
• Use the ◄► buttons to select an item you want
to view or play, and then press the v button. To
view or play another item, press the RETURN
(') button, and then repeat the process
described in the first sentence.
English
39 |
Media Play
The AllShare Play Screen
• Use the ◄► buttons to select an item, press
the TOOLS button to display the Tools menu,
select Play, and then press the v button. To view
or play another item, press the RETURN (')
button, and then repeat the process described
in the first sentence.
05
Your Blu-ray product can play Disc and USB
contents and the contents located on your PC,
DLNA compatible mobile phone, or NAS using the
AllShare Play function. For more information about
AllShare Play, refer to page 42.
Media Play
Playing Files on a USB Storage
Device or iPod/iPhone
You can play multimedia files located on a
connected USB device.
1 . With the product turned off, connect a USB
storage device or an iPod/iPhone.
2 . Turn on the product. When the Main screen
appears, select AllShare Play > Videos,
Photos or Music > Connected device, and
then press the v button.
3 . The kind of content you selected on the
connected device is displayed. Depending
on how the contents is arranged, you will see
either folders, individual files, or both.
4 . Using the $%_+ buttons on your remote,
select the desired contents. To open a folder,
select it, and then press the v button.
To play a file, select it, and then press the v
button.
5 . Press the RETURN (') button to exit a folder
or to return to the Main screen.
| CAUTION |
\\ You can play a video only when you use the iPod Dock.
AllShare Play
Play videos or music, or view photos from discs or connected devices.
Smart Hub
Function
Settings
c Safely Remove USB d WPS(PBC)
OR
1-1. With the product turned on, connect a USB
storage device or an iPod/iPhone.
2-1. When screen below appears, use the ▲▼
buttons to select the kind of content you
want to view or play, and then press the v
button.
AllShare Play
New device connected.
Play videos or music, or view photos from discs or connected devices.
USB DISK
Videos
Photos
Music
Smart Hub
" Enter ' Return
Function
Settings
c Safely Remove USB d WPS(PBC)
| NOTE |
\\ Even though the product will display all available folders,
it will only display files of the content type you selected
in Step 2 or 2-1. For example, if you selected music, you
will only be able to see music files. You can change this
selection using AllShare Play.
| 40 English
| NOTE |
\\ To prevent possible damage to the USB memory, you
must remove the USB storage device safely using the
“Safely Remove USB” function. Press the HOME button
to move to the Home menu, select the YELLOW (C)
button, and then press the v button.
\\ The Photos menu does not support iPads or iPhones.
\\ Only the playback screen will appear on the TV. View other
iPod screens on the iPod player.
\\ If the connected iPod does not support video playback, the
"Playing video files is not supported by this iPod model."
message appears when you select the Video menu.
iPod/iPhone Models You Can Use
with This Product
iPod touch 3rd/2nd/1st generation
iPod classic / iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano 5th/4th/3rd/2nd generation
iPhone 4S / iPhone 4
iPhone 3GS / iPhone 3G / iPhone
The Function Screen
\\ You can also change sources by pressing the Function button
in the upper right of the remote.
AllShare Play / Music /
To access the Function Screen, select the
Function icon on the Main screen, and then press
the v button.
Options on the Function Screen
To select, highlight an option using the ▲▼
buttons, and then press the v button.
Audio CD
+ TRACK001
03:59
TRACK002
04:34
TRACK003
04:24
TRACK004
04:01
TRACK005
04:26
TRACK006
05:07
TRACK007
04:47
TRACK008
03:59
TRACK009
04:34
TRACK010
04:02
1 / 17
 TRACK 001
00:00 / 03:59
REC
bc Page Move / Tools ' Return
Digital In
AUX
Select to listen to the digital audio
source connected to Digital Audio In.
Select to listen to audio from the
Analog audio source connected to
Audio In.
Remote iPod
Select to listen to music or view video
from the iPod connected to the iPod
jack.
HDMI 1
Select to view video from the device
connected to HDMI 1.
HDMI 2
Select to view video from the device
connected to HDMI 2.
Tuner
Bluetooth
2 . To play a particular track, use the ▲▼ buttons
on the remote to select the track, and then
press the v button.
❏❏
Music Screen Controls
Pause a track.
Play a track.
Repeat one track or all tracks.
Play tracks in random order.
Display the Equaliser.
Adjust the equaliser manually.
(Only when equaliser mode is On)
Select to listen to the FM radio.
Select to listen to the music in the
Bluetooth device.
Playing Commercial Video Discs
1 . Place a disc into the disc tray with the disc’s
label facing up and then close the disc tray.
Playback starts automatically.
If playback does not start automatically, press
the 6 button on your remote or select the
AllShare Play option on the Main screen, and
then press the v button. See "Playing Video,
Photo, or Music Content" on page 39.
| NOTE |
\\ The Music Screen controls are only accessible when a track
is playing.
\\ All controls do not appear at the same time.
\\ For more information about playing music, go to "Controlling
Music Playback" on page 46.
English
41 |
Media Play
| NOTE |
1 . Place a pre-recorded, commercial audio disc
into the disc tray with the disc’s label facing up,
and then close the tray. The AllShare Play Music
screen appears listing the tracks. Playback of
the first track starts automatically.
05
On the Function Screen, you can select the audio
and/or video input source to view or listen to.
Playing Commercial Audio Discs
Media Play
Playing a Disc with User Recorded
Content
You can play mulitmedia files you have recorded
on DVD or CD discs.
1 . Place a user recorded disc into the disc tray
with the disc’s label facing up. The Device
Connected pop-up appears.
2 . Use the ▲▼ buttons to select the type of
content you want to view or play - Videos,
Photos, or Music - and then press the v button.
| NOTE |
\\ Even though the product will display folders for all content
types, it will only display files of the content type you selected
in Step 2. For example, if you selected music, you will only
be able to see music files. You can change this selection
using AllShare Play.
3 . Use the ▲▼◄► buttons to select the folder
containing the content type you selected in Step
2, and then press the v button.
4 . If you selected Music, the AllShare Play Music
screen appears listing the music files on the
disc. Use the ▲▼ buttons to select the file you
want to play, and then press the v button.
5 . If you selected Photos, the AllShare Play Photos
screen appears listing the photos on the disc.
Use the ▲▼◄► buttons to select the photo you
want to view, and then press the vbutton.
6 . If you selected Videos, the AllShare Play Videos
screen appears listing the video files on the disc.
Use the ▲▼◄► buttons to select the video
you want to watch, and then press the v button.
| NOTE |
\\ For the Music and Video folders, you can also push the
TOOLS button on your remote, and then select Play Folder to
play or view all the files in the folder automatically. Select the
folder first before pushing the TOOLS button.
\\ For more information about playing music, go to Controlling
Music Playback on page 46.
| 42 English
\\ For more information about playing photo contents, go to
Playing Photo Contents and Using the Tools Menu when a
File is Highlighted on pages 49~51.
\\ For more information about playing video contents, go to
Controlling Video Playback on page 44.
Using the AllShare Network
Function
AllShare lets you play Videos, Photos, or Music
located on your PC or your DLNA compatible
device through the product using a wireless
network connection.
To Download the AllShare Software
To use AllShare with your PC or DLNA device, you
must install AllShare software on your PC.
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com website.
1 . Go to www.samsung.com.
2 . Click Support at the top of the page.
3 . On the Support page, enter the model
number of your product into the Model
Number field.
4 . On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
5 . On the Download Center page, click the
Software tab.
6 . On the software tab, click the File icon on the
right side of the AllShare line.
7 . In the pop-up that appears, click Save File.
8 . Find the AllShare install file on your disk, and
then double click the file.
9 . In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. You can view and/or save
the file.
Playing Content Located on Your PC or
DLNA Device through the Product
PC
Product
Play back
PC's files
AllShare Connection
1 . Connect the product, your PC, and/or your
DLNA compatible cell phone to the same
wireless network.
2 . Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3 . Select AllShare Play in the product's Home
screen, and then press the v button. The
AllShare Play screen appears.
4 . Select the connected DLNA compatible
device or your PC, and then press the v
button. A screen listing the available files
appears.
5 . Select the file you want to play or view, and
then press the v button.
Play back
PC's files
AllShare
Connection
Control PC's files to
Product
Smart Phone
(Only available with Samsung phones supporting
AllShare functionality.)
1 . Connect the product, your PC, and your
DLNA compatible cell phone to the same
wireless network.
2 . Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3 . On your computer, using the AllShare
software, confirm your phone is connected.
4 . On the phone, select the file you want to view
or play, and then select the Blu-ray product
as the playback device.
5 . On the phone, start playback.
English
43 |
Media Play
Product
05
PC
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
FUNCTION
Media Play
RECEIVER
BD
TV
TV
SOURCE
SLEEP
FUNCTION
TV
SOURCE
2 Playback
3
Controlling1Video
RECEIVER
SLEEP
4 TV 5
6
You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage
8
9
7
2
1
3 some of the functions described in this manual may not be available.
devices. Depending
on theTITLE
disc,
DISC MENU
MENU
POPUP
0
4
5
6
BD
Buttons on the Remote Control used for Video Playback
8
7
DISC MENU
0
9
TITLE MENU
„„
POPUP
MUTE
VOL
S/W LEVEL
TUNING
/ CH
Using the disc menu, title menu, popup
menu and title list
DISC MENU
During playback, press this button to
display the Disc menu.
TITLE MENU
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
GREEN (B) button to go to the playlist.
POPUP MENU
During playback, press this button to
display the Pop-up menu.
MUTE
FULL SCREEN
VOL
„„
HOME
S/W LEVEL
TOOLS
Repeat Playback
FULL SCREEN
HOME
REPEAT
TUNING
/ CH
INFO
REPEAT
1 . During playback, press the REPEAT
the remote control.
TOOLS button onINFO
RETURN
2 .
Press the EXIT
▲▼ buttons to select a
Chapter,
TUNER All or Title, then press the
MEMORY MO/ST
button.
v
A
B
C
D
RETURNSEARCH 2D→3D EXIT
3D SOUND
|SMART
NOTE |
HUB
TUNER SOUND
vTuner AUDIO SUBTITLE
Repeat a Title \
MEMORY
\ The screen
mayMO/ST
not display Chapter or Title
A
B
C
D
or Chapter
immediately.
Continue
to press the ▲▼
SMART SEARCH 2D→3D 3D SOUND
HUB buttons until your choice is inside the blue
vTuner AUDIO SUBTITLE SOUND
field.
3 . To return to normal play, press the
REPEAT button again, press the
▲▼ buttons to select Off, and then
press the v button.
EFFECT
EFFECT
1 . During playback, press the REPEAT
button on the remote control.
2 . Press the ▲▼ buttons to select
Repeat A-B.
| NOTE |
Repeat a
Section
\\ The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the blue
field.
3 . Press the v button at the point where
you want repeat play to start (A).
4 . Press the v button at the point where
you want repeat play to stop (B).
5 . To return to normal play, press the
REPEAT button again.
6 . Press the v button.
| NOTE |
\\ You must set point (B) at least 5 seconds of
playing time after point (A).
| 44 English
DISC MENU or During playback, press this button to
TITLE MENU display the title list.
„„
Playback related buttons
The product does not play sound in Search, Slow,
or Step mode.
6
Starts playback.
5
Stops playback.
7
Pauses playback.
Fast Motion
Play
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
Slow Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a new
frame appears.
Skip Motion
Play
During playback, press the 1 or 2 button.
Each time you press 1 or 2 button, the disc
moves to the previous or next chapter or
file.
Menu that appears only when BD/DVD disc
During playback, press the TOOLS button.
plays
Repeat Mode
Select to repeat a specific Title, Chapter
(BD/DVD discs only) or marked section.
Works the same as the REPEAT button.
See page 44.
Full Screen
Select to set the desired full screen
size. You can select Original, Mode1
(larger), and Mode2 (largest).
Picture Mode
Select to set the picture mode.
-- Dynamic : Choose this setting to
increase sharpness.
-- Standard : Choose this setting for
most viewing applications.
-- Movie : This is the best setting for
watching movies.
-- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTE |
\\ When you select User, the User
Settings screen appears. Select
an option, press v, use the ◄►
buttons to make an adjustment, and
then press v. Press the RETURN (')
button to go back to the TOOLS
menu.
\\ When you use the BD wise function,
this menu will not appear.
Equaliser Mode Select to use the Equaliser.
Play from the
beginning
Select to play the movie from the
beginning.
Chapter Search
Select to move to a chapter that you
desire to watch.
Audio
Select to set the desired audio
language.
-- You can also operate this function
by pressing the AUDIO button on the
remote control.
Subtitle
Select to set the desired subtitle
language.
-- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Angle
To view a scene from another angle.
The Angle option displays the number
of angles available to view (1/1, 1/2,
1/3, etc.).
BONUSVIEW
Video /
BONUSVIEW
Audio
Select to set the desired bonusview
option.
Menu that appears only when a file plays
Go to Videos
List
Move to video list screen.
Scene Search
Search the video file by the scene.
Information
Check the video file's information.
| NOTE |
\\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Select to set the Equaliser.
Equaliser
Settings
| NOTE |
\\ It only appears when equaliser
mode is on.
English
45 |
Media Play
Title Search
Time Search
Select to move to a desired title if
the disc has more than one title, to a
desired scene, or, using Time Search,
to a specific point in a movie or video.
With Time Search, you designate
the specific point by entering a time
coordinate in the following format
00:00:00 (hours, minutes, seconds)
using the remote.
05
Using the TOOLS Menu
Media Play
Controlling Music Playback
Shuffling Tracks on an Audio CD
You can control the playback of music content
located on a DVD, CD, or a USB storage device.
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
Buttons on the Remote Control used
for Music Playback
1 . During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD
TV
2
1
6
4
5
6
7
8
9
DISC MENU
0
POPUP
1
S/W LEVEL
1
TUNING
/ CH
Fast Play (Audio CD (CD-DA) only)
FULL SCREEN
HOME
REPEAT
During playback,
press
the 3
or 4 button.
Each time you press the 3 or 4 button, the playback
speed will change.
INFO
TOOLS
2 7 button : Pause a track.
3 6 button : Plays the currently selected track.
RETURN
4 5 button : Stops a track.
TUNER
MEMORY
EXIT
MO/ST
A
B
C
D
1 or 2 button to
Skip : During playback,
press
the
5 move to the previous or next music of listed.
HUB
SMART
vTuner
SEARCH 2D→3D 3D SOUND
AUDIO
SUBTITLE
SOUND
NUMBER buttons : During Playlist playback, press
the desired track number. The selected track is
played.
EFFECT
6
AllShare Play / Music /
2
3
MUTE
VOL
Creating a Playlist
TITLE MENU
5
4
2 . Use the ▲▼ to set the Shuffle Mode On or
Off, and then press the v button.
3
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1 . During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
2 . Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then
press the v button.
Audio CD
+ TRACK001
03:59
TRACK002
04:34
TRACK003
04:24
TRACK004
04:01
TRACK005
04:26
TRACK006
05:07
TRACK007
04:47
TRACK008
03:59
TRACK009
04:34
TRACK010
04:02
1 / 17
 TRACK 001
00:00 / 03:59
REC
bc Page Move / Tools ' Return
1 . With the Playback screen displayed, press the
TOOLS button. The Tools menu appears.
2 . Use the ▲▼ buttons to select Play selection,
and then press the v button. The Play
selection screen appears.
3 . Use the ▲▼ buttons to select a track, and
then press the v button. A check appears to
the left of the track.
4 . Repeat Step 3 to select and check additional
tracks.
5 . To remove a track from the list, move to the
track, and then press the v button again.The
check on the track is removed.
6 . When done, press the ► button to select
Play, and then press the v button. The Music
Playback screen reappears listing only the
tracks you checked. The selected tracks play
automatically.
| NOTE |
\\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\\ If you have created a playlist, Play selection is replaced by
Edit playlist on the Tools menu.
\\ On the Play selection screen, you can also choose Select
All, Deselect All, and Cancel.
| 46 English
•Cancel cancells any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
You can rip music from a music CD to a USB
device inserted in the USB jack.
1 . Insert a USB device into the USB jack on
the front of the product, and then press the
RETURN (') button on your remote.
2 . Insert the disc you want to rip from into the
product and close the disc tray.
3 . With the Playback screen displayed, press the
TOOLS button. The Tools menu appears.
4 . Use the ▲▼ buttons to select Rip, and then
press the v button. The Rip screen appears.
5 . Use the ▲▼ buttons to select a track, and
then press the v button. A check appears to
the left of the track.
6 . Repeat Step 4 to select and check additional
tracks.
7 . To remove a track from the list, move to the
track, and then press the v button again. The
check on the track is removed.
8 . When done, press the ► button to select Rip,
and then press the v button. The Rip pop-up
appears.
9 . Press the v button to begin the ripping
process. The Ripping Completion Bar pop-up
appears.
| NOTE |
\\ When Ripping is done, a folder called MP is created in the
USB.
Using Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetoothcompliant devices to easily interconnect with each
other using a short wireless connection.
• A Bluetooth device may cause a noise or
malfunction, depending on usage.
-- When a part of the body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Cinema.
-- Electrical variation from obstructions caused
by a wall, corner or office partitioning.
-- Electrical interference from same frequencyband devices including medical equipment,
microwave oven and wireless LAN.
• Pair the Home Cinema with the Bluetooth
device while maintaining a close distance.
• The further the distance is between Home
Cinema and Bluetooth device, the worse the
quality is.
If the distance exceeds the Bluetooth
operational range, the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Home Cinema has an effective reception
range of up to 10 meters in all directions if
there are no obstacles. The connection will be
automatically cut off if the distance is out of this
range. Even within this range, the sound quality
may be deteriorated by obstacles such as walls
or doors.
• This wireless device may cause an electric
interference during its operation.
10 .When ripping is complete, the “Ripping
completed.” message appears. Press the v
button.
English
47 |
Media Play
•Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN (') button
on your remote or select PLAY and then press the v
button. If you do not use Select All or select individual
tracks, the Playlist will not change.
11 .Press the RETURN (') button to go back to
the Playback screen.
05
•Use Select All to select all tracks. This cancells your
individual track selections. When you press the RETURN
(') button on your remote or select PLAY and then
press the v button, all tracks will appear on the Music
Playback screen, and the product will begin to play all
tracks from Track 001.
Media Play
To connect the Home Cinema to a
Bluetooth device
Connect
Bluetooth device
Check if the Bluetooth device supports the
Bluetoothcompliant stereo headset function.
1 . Press the FUNCTION button on the remote
control of product to display the BT message.
• You will see READY on the front display of
the Home Cinema.
2 . Select the Bluetooth menu on Bluetooth
device you want to connect. (refer to
Bluetooth device's user manual)
3 . Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4 . Select "Samsung HTS-Cxxxxx" from the
searched list.
• When the Home Cinema is connected to
the Bluetooth device, the device name of
the connected Bluetooth device, followed
by the Home Cinema will display the
connected device name on the front display.
5 . Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
| NOTE |
\\ The Home Cinema only supports Middle Quality SBC
data (up to 237kbps@48kHz), and does not support High
Quality SBC data (328kbps@44.1kHz).
\\ The AVRCP feature is supported and would work
differently according to another device's specification.
\\ Connect only to a Bluetooth device that supports the
A2DP Profile.
\\ Only one Bluetooth device can be paired at a time.
\\ Search or connection by product may not be performed
properly in the following cases:
| 48 English
-- If there emits a strong electric wave around Home
Cinema.
-- If several Bluetooth devices are simultaneously paired
with product.
-- If the Bluetooth device is turned off, not in place, or
malfunctions.
-- Note that such devices as microwave oven, wireless
LAN adapter, plasma bulb and gas stove use the same
frequency range as the Bluetooth device, which can
cause an electric interference.
To disconnect the Bluetooth device from
the Home Cinema
You can disconnect the Home Cinema from the
Bluetooth device. (refer to Bluetooth deivice's
user's manual)
• The Home Cinema will be disconnected.
• When the Home Cinema is disconnected from
the Bluetooth device, the Home Cinema will
display DISCONNECTED on the front display.
To disconnect the Home Cinema from the
Bluetooth device
Press the (
) button on the front panel of the
Home Cinema to switch from BT to another mode
or off the Home Cinema.
• Except disconnect through function conversion,
the connected Bluetooth device will wait a
certain time for response from the Home
Cinema before terminating the connection.
(Disconnection time may differ, depending on
the Bluetooth device)
• The currently connected device will be
disconnected.
| NOTE |
\\ In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the Home Cinema
System and the Bluetooth device exceeds (10 meters).
If the distance is returned to the effective range or you
restart the Bluetooth device, you have to reconnect them.
\\ If the Bluetooth device falls back in the effective range,
you can restart to restore the pairing with the Bluetooth
device.
\\ In BT function mode, Screen saver will operate if
the device keep Ready state last 5 minute. Then, for
connecting the BT device, turn off the screen saver and
connect it. To turn off the Screen saver, operate any
button on the remote control. (e.g. Volume button etc.)
Using the Tools Menu
During playback, press the TOOLS button.
Go to Photos
List
Select to go to the list of photos on the
current media.
Start Slide
Show
Select to start the slide show.
Slide Show
Speed
Select to set a slide show's speed.
Slide Show
Effect
Select to set a slide show's special
effects.
Background
Music On
Select to listen to music while viewing
a slide show.
Background
Music Setting
Picture Mode
Select to set the background music
setting.
Select to set the picture settings.
-- Dynamic : Choose to increase
Sharpness.
-- Standard : Choose for most viewing
applications.
-- Movie : This is the best setting for
watching movies.
-- User : Lets you adjust the sharpness
and noise reduction function
respectively.
\\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
\\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the Bitrate
of the MP3 file, the size of the photo, and the encoding
method.
Media Play
You can play photo contents located on a DVD,
USB, mobile device or PC.
| NOTE |
05
Playing Photo Contents
\\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Tools Menu when a File
is Highlighted
When a file is highlighted, press the TOOLS
button.
View
Select to access the sort options: Artist,
Genre, Monthly, Latest Date, etc. The
sort options that appear depend on the
storage and media type.
Folder view
Appears in the View function screen.
Select to display the folders on the
storage device.
Title
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by title.
Artist
Appears on the View function screen.
Select Artist to sort and then display
all music tracks on a storage device by
artist.
Album
Appears on the View function screen.
Select Album to sort and then display
all music tracks on a storage device by
album.
Genre
Appears on the View function screen.
Select Genre to sort and then display
all music tracks on a storage device by
genre.
Latest Date
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the latest to earliest date.
| NOTE |
\\ When you use the BD wise function,
this menu will not appear.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Information
Shows the picture information.
English
49 |
Media Play
Earliest Date
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the earliest to latest date.
Monthly
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by the month created.
Play selection lets you select specific
music, video, and photo files to play.
It works essentially the same for all
media. The example below is for
photos.
Send
2. Repeat for each track or file you
want to upload.
| NOTE |
\\ You can also move to Select All
on the right, and then press the v
button to select all tracks or files.
2. In the Tools menu, select Play
selection, and then press the v
button.
3. Select Send on the right side, and
then press the v button.
4. Use the ▲▼ buttons to select the
on line site you want to upload the
files or tracks to, and then press
the v button.
Login / Out
The Log In/Out function lets you log in
to your online Samsung account.
4. Repeat Step 3 for each photo you
want to view.
Select to create a playlist or add files
or tracks to a playlist.
5. To de-select a photo, highlight it,
and then press the v button.
1. Select Add to Playlist, and then
press the v button.
6. When done, use the ◄► buttons
to select Play, and then press the v
button. A slide show containing the
photos you selected begins.
2. Use the ▲▼◄► buttons to
highlight a track or file, and then
press the v button.
7. To pause the slide show, press the
v button once. To restart the slide
show, press the v button again.
8. To stop the slide show, press the
RETURN (') button.
| NOTE |
\\ After the slide show begins, you can
control the slide show by pressing
the TOOLS button and displaying
the Slide Show menu. See " Using
the Tools Menu" page 49.
| 50 English
1. Use the ▲▼◄► buttons to
select a file, and then press the v
button.
1. On the Thumbnail View screen,
highlight a photo, and then press
the TOOLS button on the remote.
3. On the selection screen, use the
▲▼◄► buttons to select a
photo you want to view, and then
press the v button.
A check mark appears to the left
of the picture.
Play selection
Select Send to upload selected files
to Picasa, Facebook, Cloud Storage, N
Drive, or Family Story.
To use Send, you need to establish an
account with the on-line site, and then
log in using the Log In function.
Add to Playlist
3. Repeat for each track or file you
want to add.
4. Select Add on the right, and then
press the v button.
5. On the screen that appears,
perform one of the following
actions:
• Select the Playlist to which you want
to add the tracks or files and then
press v button.
Select Edit playlist to remove files or
tracks from an existing playlist. The
storage device containing the playlist
must be inserted into or attached to
the product.
Edit playlist
1. Use the ▲▼◄► buttons to
select a file, and then press the v
button.
2. Repeat for each track or file you
want to remove.
| NOTE |
\\ You can also move to Select All
on the right, and then press the v
button to select all tracks or files.
3. Select Remove on the right side,
and then press the v button.
Play Current
Group
Go to Playlist
After you have sorted by Artist, Genre,
Album,Title, Latest Date, Earliest Date,
or Monthly, select a group that is the
result of the sort (for example, all
pictures taken in August), and then
select Play Current Group to play or
view the files in that group only.
Select to go to the Playlist section of
the Main AllShare screen.
Information
Displays media file and content
information.
| NOTE |
\\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Listening to Radio
Using Buttons on the Remote Control
1 . Press the FUNCTION button to select FM.
2 . Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (,.) button to select the
preset station.
-- Before you can tune to preset stations,
you must add preset stations to the
product's memory. See page 52 for
instruction.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING/CH
(,.) button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING/CH (,.) button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
English
51 |
Media Play
Depending on the screen you are
viewing, select Delete to erase a file
Delete (Playlist)
from erasable media (such as a USB
device) or to delete a playlist.
Encoding
Encoding - which changes by language
or by geographical area - modifies
how the product sorts, arranges, and
presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
05
• Select Create new, and then press
the v button. On the keyboard popup that appears, create a name for
the new playlist. Enter numbers
using the numbers on the remote.
Enter letters by using the ▲▼◄►
buttons to move the cursor, and then
pressing the v button. When finished,
move to DONE at the bottom of the
screen, and then press the v button.
Media Play
Presetting Stations
Example : Presetting FM 89.10 into memory.
Using the Special Effects Remote
Control Buttons
1 . Press the FUNCTION button to select FM.
2 . Press the TUNING/CH (,.) button to select
<89.10>.
3 . Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 . Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 . To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH (,.) button.
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off  High  Medium  Low
| NOTE |
\\ It is not available in FM mode.
Playing a 2D video in 3D mode
You can enjoy an ordinary 2D video in 3D mode.
| NOTE |
\\ If you move to the Home or Smart Hub Home menu in
3D mode, it will switch to 2D automatically.
vTUNER
vTUNER
vTuner is the fuction of the listening a radio. If you press
the vTuner button, you can move to vTuner application.
You can use the vTuner Function after download the
vTuner application from Samung Apps.
| 52 English
SOUND
EFFECT
1. Press the SOUND EFFECT button.
2. Press the ▲▼ button to select the desired mode:
DSP, Dolby Pro Logic II or SFE Mode.
3. Press the ◄► buttons to select the desired sound
effect.
❏❏
• J azz Club in Seoul B : Recommended setting for Jazz.
• C hurch in Seoul : Gives the feel of being in a grand
church.
• A mphitheater (Rock) : Recommended setting for
Rock.
• Off : Select this for normal listening.
DSP
MP3 Enhancer  Power Bass  Off
• M
P3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale your MP3
level sound (24 kHz, 8bit) to CD level sound (44.1 kHz,
16bit).
• P ower Bass : Increases the volume level of bass tones
and provides thudding sound effects.
• Off : Select this for normal listening.
❏❏
Dolby Pro Logic II
Movie  Music  Game  Matrix  Prologic  Off
• Movie : Adds realism to a movie soundtrack.
• M
usic : When listening to music, you can experience
sound effects as if you are listening to the actual
performance.
• Game
: Enhances the excitement of the game’s sound.
• Matrix : Select to hear multi channel surround sound.
• Prologic
: Select to listen to a 2CH sound source in
5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending on
the input signal.
• Off : Select this for normal listening.
❏❏
SFE Mode
S ymphony Hall in Boston (Hall 1)  Phillharmonic
Hall in Bratislava (Hall 2)  Jazz Club in Seoul B 
Church in Seoul  Amphitheater (Rock)  Off
• S ymphony Hall in Boston (Hall 1) : Also provides a
clear vocal as if you are listening in a concert hall but,
less powerful than HALL1.
English
53 |
Media Play
Lets you select a mode that optimizes the sound.
• P hillharmonic Hall in Bratislava (Hall 2) : This also
helps enhance your sound experience (ex. mp3 music).
You can upscale your MP3 level sound (24 kHz, 8bit) to
CD level sound (44.1 kHz, 16bit).
05
SOUND EFFECT Function
Network Services
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the product
to your network.
Smart Hub at a Glance
1
To use network services, you must first:
2
34
Search
1 . Connect the product to the network.
(See page 22)
2 . Configure the network settings.
(See pages 32~36)
0
9
Samsung Apps
Your Video
Family Story
Fitness
5
6
Contents 1
Contents 2
Contents 3
Contents 4
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Kids
7
Using Smart Hub
Using Smart Hub, you can download movies,
videos, and music from the Internet, and access
various for pay or free-of-charge applications
and view them on your TV. Application content
includes news, sports, weather forecasts, stock
market quotes, maps, photos, and games.
For instructions that explain how to use Smart
Hub, follow these steps:
a Login b WallPaper / Tools ' Return
1
Your Video : Provides recommendations for videos
based on your tastes.
2
Search : Provides an integrated search of your
video providers and connected AllShare devices.
3
Recommended : Displays recommended contents
managed by Samsung.
4
Commercial : Displays the Smart Hub Guide, an
introduction to the product, and new application
introductions.
5
Family Story : An effortless way to access family
content.
• Provides access to family photos, messages, and
events, anytime and anywhere.
6
Fitness : Gateway to the Unified Self-Care Service.
• Presents fitness videos from various content
partners with feedback on calories burned after
every workout.
7
Kids : Kids service gives kids an easy and safe way
to enjoy their Favorite content.
• Provides a wide variety of fun and safe content
for children.
8
Navigation Help : Displays the remote control
buttons you can use to navigate in Smart Hub.
• RED (A) : To log in to Smart Hub.
• GREEN (B) : To display the background screen.
• Tools : To display the settings window.
• Return : To return to the previous menu.
1 . Go to www.samsung.com.
2 . Click Support at the top of the page.
3 . On the Support page, enter the model
number of your product into the Model
Number field.
4 . On the page that appears, click Get
downloads on the left side under Downloads.
The Download Center appears.
5 . On the Download Center page, click the
Manuals tab.
6 . On the Manuals tab, click the file icon to the
right of Smart Hub Users Manual. The manual
downloads.
| NOTE |
\\ The web location of the Smart Hub manual is subject to
change without notice.
| 54 English
8
9
Web Browser at a Glance
1
Network Services
Samsung Apps : Open Samsung Apps to download
various for pay or free-of-charge application
services.
06
0
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
delete.
http://www.google.com/
Using the Web Browser
You can access the internet using the Web
Browser application which is installed in the Smart
Hub screen by default.
Google Search
1 . Select Smart Hub on the Home screen, and
then press the v button.
b Control Panel c Switch to pointer
2 . Select the Web Browser application in Smart
Hub, and then press the v button.
| NOTE |
\\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV - and BD
Wise is on - the browser is maximized to fill the screen
and the TV's resolution is set to the optimal resolution
automatically.
\\ The Web Browser is not compatible with Java
applications.
\\ If you attempt to download a file, and the file can not be
saved, an error message will appear.
\\ The playback of Flash videos is not supported.
\\ E-commerce, for purchasing proudcts online, is not
supported.
\\ ActiveX is not supported.
1
I’m Feeling Lucky
Scroll Up/Scroll Down / Tools ' Return
2
Control Panel : Displays the various Web Browser
functions.
• : Moves to the previous page.
• : Moves to the last page before going back.
• : Reloads the current page so that it is
refreshed on the screen.
• : Moves to the Home screen of the Web
Browser.
• : Allows you to zoom in or out of the screen at
various percentages.
• : Allows you to bookmark specific pages so
that you can move to them easily.
• : Allows you to view the history of your visited
pages by date, name, or frequency.
• http://www.google.com/
: Allows you to enter a
page address manually or select a page from the
visited page list to move to that page.
•
: Allows you to switch easily between
multiple, currently open Web Browser windows.
• : Allows you to search for information by
entering words.
• : Lets you share the current site with your
family group by sending a message.
• : Allows you to configure all settings for using
the Web Browser.
English
55 |
Network Services
2
Navigation Help : Displays the remote control
buttons you can use to navigate in Web Browser.
• GREEN (B) : To display the Control Panel.
• YELLOW (C) : To search a link.
• ( ) : Scroll Up/Scroll Down the page.
• Tools : To display Tools window.
• Return : To return to the previous menu.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
contents available on BD-LIVE compliant discs.
1 . Attach a USB memory stick to the USB jack
on the front of the product, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
2 . Select Settings on the Home screen, and
then press the v button.
3 . Select Network, and then press the v button.
4 . Select BD-Live Settings, and then press the
v button.
5 . Select BD Data Management, and then
press the v button.
6 . Select Select Device, and then press the v
button.
7 . Select USB, and then press the v button.
8 . Insert a Blu-ray Disc that supports BD-LIVE.
9 . Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
| NOTE |
\\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
| 56 English
Appendix
Additional Information
07
Note
Connections
• Certain HDMI output resolutions may not work, depending on your TV.
• You must have an HDMI connection to enjoy videos with 3D technology.
• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the
menu.
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once. The
Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray menu.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of
picture).
BD Wise (Samsung Products only)
Settings
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
• For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the Analog (L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
BD-LIVE Internet Connection
• The Internet connection may be restricted while you are using BD-LIVE contents.
English
57 |
Appendix
HDMI OUT
Appendix
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on the conditions.
DivX® Video On Demand
• For more information about DivX(R) VOD, visit “http://vod.divx.com”.
Front Display
• You cannot change the brightness of the
Settings
button and the VOL +, - button.
Speaker Settings
• When Speaker Selection is selected to TV Speaker, audio is produced through TV speakers.
• Running the Auto Sound Calibration function takes about 3 minutes.
• Make sure there is no disc in the product when you run the Auto Sound Calibration function.
• If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be
canceled.
• When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode
will not work.
• If the product is connected to external devices or other components (such as an iPod, AUX,
D. IN), the Auto Sound Calibration Setup may not work properly.
HDMI audio
• When HDMI audio output to the TV speaker, it is automatically down-mixed to 2 channels.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility
problem.
• The ARC function is only available if an ARC-compliant TV is connected.
Digital Output
• Digital Output can be activated when Speaker Selection is selected to TV Speaker.
| 58 English
Playing a Video files
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in
English.
Playback
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
Playing a JPEG files
• You can’t enlarge the subtitle and PG graphic in the full screen mode.
Dolby Pro Logic II Mode
• Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
Using the TOOLS button while playing pictures
AllShare Play
• If the system is connected to a BD Wise compliant TV that has set BD Wise to On, the Picture
Settings menu will not appear.
• The Background Music function will not work unless the music file and the photo file are located
on the same storage media. Also, sound quality can be impacted by the Bitrate of the MP3 music
file, the size of the photos, and the encoding method.
Playing back a USB Storage Device
• You must remove the USB storage device safely (by performing the “Safely Remove USB”
function) to prevent possible damage to the USB memory. Press the HOME button to move to the
Home menu, select the YELLOW (C) button, and then press the v button.
English
59 |
Appendix
Selecting the Audio Language
07
• Video files with high Bitrates of 20Mbps or more strain the product’s capabilities and may stop
playing during playback.
Appendix
Playing Music
• Adjust the volume to a moderate level before you connect your iPod to the product.
• When the product is on and you connect an iPod, the product will charge the iPod's battery.
Watching a Movie
AllShare Play
• You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page
20).
• If you want to play iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off.
• Only the playback screen will appear on the TV. View other iPod screens on the iPod player.
• If you want to return to the iPod menus while the iPod player is connected using the dock, press
FUNCTION on the remote control or press
on the front panel of the system and select
R. IPOD.
The Function mode switches as follows :
BD/DVD  D. IN  AUX  R. IPOD  HDMI1  HDMI2  FM  BT
iPod/iPhone Models You Can Use with This Product
iPod
| 60 English
• The volume control may not operate normally with iPod and iPhone models not listed on page
40. If you have a problem with any of the models listed above, please update the software of the
iPod/iPhone to the lastest version.
• Depending on the software version of the iPod, control problems may occur. This is not a
malfunction of the Home Cinema.
• Depending on the software version or the type of iPod, some operations may differ. Install the
latest iPod software. (recommended)
• You can enjoy music or videos through the Blu-ray/DVD disc function and enjoy music, videos
through the Remote iPod function. You need to use the iPod Dock to enjoy videos.
• Playback of applications' contents through the product is not guaranteed. We recommend
playing contents downloaded to the iPod.
• If you have a problem using your iPod, please visit www.apple.com/support/ipod.
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
07
❏❏
Setup
❏❏
HDMI/not connected
HDMI Mode
Blu-ray Disc
E-contents/
Digital contents
VIDEO Mode
VIDEO Mode
BD Wise
Resolution of Bluray Disc
1080p@60F
576i/480i
-
Auto
Max. Resolution of
TV input
Max. Resolution of TV
input
576i/480i
-
1080p@60F
1080p@60F
1080p@60F
576i/480i
-
Movie Frame : Auto
(24Fs)
1080p@24F
1080p@24F
576i/480i
-
1080i
1080i
1080i
576i/480i
576i/480i
720p
720p
720p
576i/480i
576i/480i
576p/480p
576p/480p
576p/480p
576i/480i
576i/480i
576i/480i
-
-
-
576i/480i
DVD playback
HDMI/connected
Output
Setup
HDMI/not connected
HDMI Mode
VIDEO Mode
VIDEO Mode
BD Wise
576i/480i
576i/480i
-
Auto
Max. Resolution of TV input
576i/480i
-
1080p@60F
1080p@60F
576i/480i
-
1080i
1080i
576i/480i
576i/480i
720p
720p
576i/480i
576i/480i
576p/480p
576p/480p
576i/480i
576i/480i
576i/480i
-
-
576i/480i
English
61 |
Appendix
HDMI/connected
Output
Appendix
Digital Output Selection
Setup
Connection
PCM
Dolby Digital
Dolby Digital
Plus
Audio Stream
Dolby TrueHD
on Blu-ray
Disc
DTS
DTS-HD High
Resolution
Audio
DTS-HD
Master Audio
PCM
Audio Stream Dolby Digital
on DVD
DTS
Definition for
Blu-ray Disc
Bitstream
(Unprocessed)
PCM
Any
HDMI
supported
AV receiver
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
Up to PCM
6.1ch
Up to PCM
7.1ch
Up to PCM
7.1ch
PCM 2ch
Up to PCM
5.1ch
Up to PCM
6.1ch
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Optical
HDMI
supported
AV receiver
Optical
HDMI
HDMI supported
supported AV
AV receiver or
receiver or
Optical
Optical
PCM 2ch
PCM
PCM 2ch
DTS re-encoded
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
PCM 2ch
Dolby Digital
Dolby Digital DTS re-encoded
Plus
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
PCM 2ch
DTS
DTS-HD High
Resolution
Audio
DTS-HD
PCM 2ch
Master Audio
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS re-encoded
DTS
DTS re-encoded
DTS
DTS re-encoded
PCM 2ch
PCM 2ch
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
Dolby Digital
DTS
DTS
PCM 2ch Dolby Digital Dolby Digital
PCM 2ch
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
DTS
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
DTS
Decodes the main
feature audio and
Outputs only the main
audio
feature audio stream so that BONUSVIEW
stream together
your AV receiver can decode into
PCM audio and
the audio bitstream.
adds Navigation
You will not hear
Sound Effects, then
BONUSVIEW audio or
re-encodes the
Navigation Sound Effects. PCM
audio into DTS
bitstream.
Re-encoded
Dolby Digital *
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the PCM
audio into Dolby
digital bitstream or
PCM.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
| 62 English
Troubleshooting
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
The iPod fails to connect.
• Check the condition of the iPod connector and Dock.
• Keep the iPod software version up to date.
Playback does not start.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• The home cinema does not play sound during fast playback, slow playback,and step motion
playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and not
all 8.
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Dolby Digital 7.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround Sound is
produced only if the disc is recorded with 7.1 channel sound.
• Is the audio language correctly set to Dolby Digital 7.1-CH in the information display?
The remote control does not
work.
• Are you operating the remote within its operational range and within the proper angle relative to
the sensor?
• Are the batteries drained?
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?
• The disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Picture quality is poor and
picture is shaking.
Audio language and subtitles
do not work.
• Audio language and subtitles will not work if the disc does not contain them.
English
63 |
Appendix
Symptom
07
Refer to the table below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord and contact the nearest authorized dealer or Samsung Electronics Service Center.
Appendix
Symptom
The menu screen does not
appear even when the menu
function is selected.
The aspect ratio cannot be
changed.
• The product is not working.
(Example: The power goes
out or a strange noise is
heard.)
Check/Remedy
• Are you using a disc that does not contain menus?
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
• Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• The Product is not working
normally.
You have forgotten the rating
level password.
• With no disc in the product, press and hold the product's 5 button for longer than 5
seconds. INIT appears on the display and all settings will return to the default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
• If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or
AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
"Not Available" appears on
screen.
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc in the
product. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP (Highbandwidth Digital Content Protection).
| 64 English
Symptom
Check/Remedy
• AllShare Play shows only files corresponding to the Photo, Music, and Movie categories.
Files that do not correspond to these categories may not be displayed.
Video is played intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not overloaded.
• The wireless connection between the server and the product is unstable.
Check the connection.
The AllShare Play connection
between the TV and PC is
unstable.
• IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the
BD-LIVE server.
• Test whether the network connection is successful by using the Network Status
function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 58)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 58)
| NOTE |
\\ When the factory default settings are restored, all stored user BD data will be deleted.
English
65 |
Appendix
I can see folders shared
through AllShare Play,
but I cannot see the files.
07
AllShare Play function
Appendix
Specifications
General
FM Tuner
Weight
3.9 kg
Dimensions
430 (W) x 65 (H) x 353.5 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
BD (Blu-ray Disc)
Reading Speed : 9.834 m/sec
DVD (Digital Versatile Disc)
Disc
CD : 12cm (COMPACT DISC)
CD : 8cm (COMPACT DISC)
Video Output
Video/Audio
Amplifier
Composite Video
HDMI
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray Disc : 576i/480i
DVD : 576i/480i
1080p, 1080i, 720p, 576p/480p
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3Ω)
Front Top speaker output
165W x 2(3Ω)
Center speaker output
170W(3Ω)
Surround speaker output
165W x 2(3Ω)
Subwoofer speaker output
170W(3Ω)
Frequency response
| 66 English
Reading Speed : 6.98 ~ 7.68 m/sec.
Analog input
Digital input
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
20Hz~20kHz (±3dB)
20Hz~40kHz (±4dB)
Speaker system
Front
Front Top
Surround
Center
Subwoofer
Impedance
3Ω
3Ω
3Ω
3Ω
3Ω
Frequency range
140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz
Output sound
pressure level
87dB/W/M
87dB/W/M
87dB/W/M
87dB/W/M
88dB/W/M
Rated input
165W
165W
165W
170W
170W
Maximum input
330W
330W
330W
340W
340W
Dimensions
(W x H x D)
Front/Front Top : 90 x 1200 x 70 (Stand base: 240 x 240) mm
Surround : 90 x 1200 x 70 (Stand base: 250 x 250) mm
Center : 360 x 74.5 x 68.5 mm
Subwoofer : 200 x 390 x 350 mm
Weights
Front/Front Top : 4.7 kg, Surround : 3.9 kg
Center : 0.9 kg, Subwoofer : 5.7 kg
07
• Network speeds equal to or below 10Mbps are not supported.
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• For the power supply and Power Consumption, refer to the label attached to the product.
❏❏
SWA-5000
Weight
1.1 kg
Dimensions (W x H x D)
76.2 x 228.6 x 152.4 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Output
165W x 2 CH
Frequency range
20Hz~20KHz
S/N Ratio
65dB
English
67 |
Appendix
Speaker
7.1ch speaker system
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
Area
` Asia Pacific
Contact Center 
AUSTRALIA
NEW ZEALAND
CHINA
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
HONG KONG
(852) 3698 4698
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
VIETNAM
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
U.A.E
OMAN
KUWAIT
BAHRAIN
Egypt
JORDAN
IRAN
Morocco
Saudi Arabia
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
NIGERIA
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864 )
www.samsung.com
INDIA
INDONESIA
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
` Middle East
` Africa
Ghana
Cote D’ Ivoire
Senegal
CAMEROON
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
AH68-02445M-00
Download PDF