Samsung | NP-P200 | Samsung NP-P200 User Manual (Vista)

Q45c/Q46c/P200
User Guide
Chapter 1.
Getting Started
Product Features
2
Before You Start
3
Contents
6
Safety Precautions
7
USA ONLY
18
Proper Posture During Computer Use
19
Important Safety Information
22
Replacement Parts and Accessories
24
Regulatory Compliance Statements
26
WEEE SYMBOL INFORMATION
36
Overview
37
Front View
7
Status Indicators
8
Right View
9
Left View
0
Back View
1
Bottom View
Turning the Computer On and Off
43
Turning the computer on
Turning the computer off
Product Features
High Performance Notebook Computer
■ Intel Core™2 Duo Processor*. DDR II Memory
■ Wireless LAN*, Bluetooth*
Easy-to-Use AV
■ Play AVStation and AVStation Now* are provided to easily play various
multimedia files.
■ Camera Module Installed*
Sophisticated Design for Increased Usability
■ AV Button and various shortcut keys on the keyboard
■ Multi card slot*
■ Luxurious design with increased usability
*
Note
The items marked with this symbol are optional items that are
supported depending on the computer model.
Before You Start
Before reading the User Guide, first check the following information.
User Guide Information
Utilizing the User Guide
This product is supplied with an Installation Guide, and a
User Guide.
You can even more easily and conveniently use the
computer by using any of the guides depending on your
needs.
Be sure to read the Safety Precautions before using
the computer.
Refer to the separately supplied Installation Guide
when installing your computer.
Refer to the User Guide for the procedures to use the
computer.
Installation Guide
Using the Index of the User Guide, you can easily find
This guide is provided so that you can conveniently refer
to this guide when using the computer for the first time
after purchasing it.
This document includes the computer components and
the connection procedures.
any information you are looking for.
Using the Glossary of the User Guide, you can easily
find meanings for technical terms.
If a problem occurs, refer to the Q & A included in the
User Guide.
User Guide
You are currently reading the User Guide. To open the
file at any time, double-click the icon on the Desktop.
Alternatively, select Start > All Programs > Samsung >
User Guide > User Guide.
This document includes the computer functions, how to
use the functions, and how to use the program.
Note
■ Some devices and software referred to in the
User Guide may not be provided and/or changed
by upgrade.
Note that the computer environment referred in
the User Guide may not be the same as your own
environment.
■ Images used in this User Guide may differ from
actual product.
■ This guide decribes procedures for using both the
mouse and the touchpad.
■ The illustrations provided in this guide assume
that your operating system is Windows Vista.
These illustrations are subject to change.
■ The User guide supplied with this computer may
vary depending on your model.
Safety Precaution Notations
Icon
Notation
Description
Warning
Failing to follow instructions marked with
this symbol, may cause personal injury
and or fatality.
Caution
Failing to follow instructions marked with
this symbol, may cause slight injury to
yourself or damage your property.
Copyright
© 2007 Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. owns the copyright of this
manual.
No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, without the
consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without
notice due to improving the performance of the product.
Samsung Electronics shall not be liable for any data loss. Please
take care to avoid losing any important data and backup your
data to prevent any such data loss.
Text Notations
Icon
Precautions for Operating System Support
Notation
Description
Before
You Start
Content included in this section includes
information required before using a
function.
Caution
Content included in this section includes
information required about the function.
Note
Content included in this section includes
helpful information to use the function.
Page XX
This notation represents the page
number you can refer to for information
about related functions or as a
reference.
Start > All
Programs >
Samsung > User
Guide > User
Guide
The operating system (OS) installed on this product is the latest
version of Windows Vista.
Other operating systems (Windows 98, Windows ME, Windows
2000, Windows 2003 server, UNIX and LINUX, other Windows
Vista versions, etc.) other than the operating system already
installed on this computer are not supported.
If a problem occurs because of the installation of another
operating system, the company will not provide technical
support, a replacement or refund, and if our service engineer
visits you due to this problem, a service charge will be applied.
In addition, installing a program that does not support Windows
Vista, may cause the program to not work properly.
In this case, ask the corresponding software manufacturer about
the problem. If you request our services to resolve a problem
caused by incompatible software, a service charge will be
applied.
This represents a menu path to run a
program.
Click the Start button and then select All
Programs > Samsung > User Guide >
User Guide in this order from the menu.
About the Product Capacity Representation Standard
About HDD Capacity Representation
The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the
capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB, 80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte =
74.505GB)
In addition, the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may
reside in a hidden area of the HDD.
About Memory Capacity Representation
The memory capacity reported in Windows is lesser than the actual capacity of memory.
This is because BIOS or a video adapter uses a portion of memory or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as 1,022MB or less)
The actual capacity of storage device can be checked in the Main menu of the BIOS Setup, accessible by pressing F2 key during boot.
For further instructions on how to enter the BIOS Setup, refer to "Settings and Upgrade" in the User Guide.
Contents
Chapter 1. Getting Started
Product Features
2
Before You Start
3
Contents
6
Safety Precautions
7
USA ONLY
18
Proper Posture During Computer Use 19
Important Safety Information
22
Replacement Parts and Accessories
24
Regulatory Compliance Statements
26
WEEE SYMBOL INFORMATION
36
Overview
37
Front View37
Status Indicators38
Right View39
Left View40
Back View41
Bottom View42
Turning the Computer On and Off
43
Turning the computer on43
Turning the computer off43
Chapter 2. Using the Computer
Keyboard
Touchpad
CD Drive (ODD)
Inserting and Ejecting a CD
Burning a CD
HD DVD (Optional)
Blu-Ray (Optional)
Multi Card Slot
PCI ExpressCard Slot
Connecting a Monitor
Connecting a Monitor
Viewing Through a Monitor Using Dual View
Adjusting the Volume
Using Digital Output (S/PDIF)
45
48
51
51
52
53
55
57
60
61
61
61
62
64
66
72
72
74
76
79
82
82
84
89
91
93
Chapter 4. Using the Network
Wired Network
Wireless Network
Connecting to a Wireless LAN
Using the Easy Network Manager
Network Settings
Using in Another Location
Diagnosing the Network Status
Connecting with a Modem
Bluetooth (Optional)
Bluetooth Function
Using Bluetooth
95
98
99
100
100
102
103
104
105
105
106
Chapter 5. Using Applications
Introducing Programs
CyberLink PowerDVD (Optional)
Samsung Update Plus (Optional)
Play AVStation (Optional)
Launching and Screen Layouts
Movie Station
Music Station
Photo Station
AVStation Now (Optional)
Start Exit
Screen Layout
Play Camera (Optional)
111
114
116
118
118
119
123
127
131
131
131
131
132
Chapter 6. Settings and Upgrade
Chapter 3. Using Microsoft
Windows Vista
About Microsoft Windows Vista
Welcome Center
Help and Support
Windows Vista Screen Layout
Desktop
Start Menu
Sidebar / Gadget
Window
Control Panel
Opening the Control Panel
User Accounts
Phishing Filter
User control function
Windows Mobile Center
70
70
71
LCD Brightness Control
BIOS Setup
Entering the BIOS Setup
The BIOS Setup Screen
Setting a Boot Password
Changing the Boot Priority
134
135
135
137
139
141
Upgrading Memory
Battery
Installing/Removing the Battery
Charging the Battery
Measuring the Remaining Battery
Charge
Extending the Battery Usage Time
Using the Security Lock Port 142
144
144
145
145
146
149
Chapter 7. Windows Media Center
About Package Contents and the
Program Guide
Connecting and Setting Up Media
Center
Optional Devices
Using Media Center Start Screen Layout
Pictures + Videos
Music
TV + Movies
151
152
152
156
156
157
161
165
Chapter 8. Appendix
Using McAfee SecurityCenter
(Optional)
Using Samsung Magic Doctor
(Optional)
Reinstalling Software
Q & A
Display Related
Modem Related
Wired Network (LAN) Related
Wireless Network (WLAN) Related
Game and Program Related
Bluetooth
HD DVD (Optional)
Blu-Ray (Optional)
Other
Product Specifications
Glossary
Index
Contact SAMSUNG WORLD WIDE
169
170
172
174
174
175
177
178
182
183
185
186
187
188
192
196
197
Safety Precautions
For your security and to prevent damage, please read the following safety instructions carefully.
Since this is commonly applied to Samsung Computers, some figures may differ from actual ones.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Installation Related
Do not install the product in
places exposed to humidity such
as a bathrooms.
There is a danger of electric
shock. Use the product within the
operating conditions specified in the
Manufacturers User Guide.
Keep the plastic bags out of the
reach of children.
There is a danger of suffocation.
Keep a distance of 15cm or more
between the computer and the
wall and do not place any objects
between them.
Avoid exposing any part of
your body to the heat from the
computer vent for a long time
when it is on.
This may increase the internal
temperature of the computer and
may cause an injury.
Exposing a part of your body to the
heat from the vent for long periods
of time may cause a burn.
Do not install the computer
on a slant or a place prone to
vibrations, or avoid using the
computer in that location for a
long time.
Avoid blocking the vent at the
bottom or side of the computer
when using it on a bed or
cushion.
This increases the risk that a
malfunction or damage to the
product will occur.
If the vent is blocked, there is a
danger of damaging the computer
or overheating the inside of the
computer.
Ver 1.2
Power Related
The power plug and wall outlet figures may differ depending on the country specifications and
the product model.
Do not touch the mains plug or
power cord with wet hands.
There is a danger of electric shock.
Do not exceed the standard
capacity (voltage/current) of
a multiplug or power outlet
extension when using it for the
product.
If the power cord or power outlet
makes a noise, disconnect the
power cord from the wall outlet
and contact a service center.
There is a danger of electric shock
or fire hazard.
Plug the power cord firmly into
the power outlet and AC adapter.
Failing to do so may cause fire
hazard.
There is a danger of electric shock
or fire hazard.
Do not use a damaged or loose
mains plug or power cord or
power outlet.
There is a danger of electric shock
or fire hazard.
Do not unplug the power cord
out by pulling the cable only.
If the cord is damaged, it may
cause electric shock.
Battery Usage Related
Do not bend the power cord
excessively or do not place a
heavy object over the power
cord. It is especially important
to keep the power cord out of
reach of infants and pets.
If the cord is damaged, it may
cause electric shock or fire.
If water or another substance
enters the power input jack,
AC adapter or the computer,
disconnect the power cord and
contact the service center.
Damage to the device within the
computer may cause electric
shock or fire hazard.
Keep the battery out of the
reach of infants and pets, as
they could put the battery into
their mouths.
There is a danger of electric
shock or choking.
Usage Related
Disconnect all cables connected
to the computer before cleaning
it. If you are using a notebook
computer, remove the battery.
There is a danger of electric shock
or damage to the product.
Do not place any container filled
with water or chemicals over or
near the computer.
If water or chemicals enter the
computer, this may cause fire or
electric shock.
If the computer is broken or
dropped, disconnect the power
cord and contact a service center
for a safety check.
Using a broken computer may
cause electric shock or fire hazard.
Avoid direct sunlight when
the computer is in an air-tight
location such as inside a vehicle.
There is a danger of a fire hazard.
The computer may overheat and
also present opportunity to thieves.
Do not connect a phone line
connected to a digital phone to
the modem.
There is a danger of a electric
shock, fire or damage to the
product.
10
Upgrade Related
Never disassemble the power
supply or AC adapter.
There is a danger of electric shock.
When removing the RTC (Real
Time Clock) battery, keep it out
of the reach of children as they
could touch and/or swallow it.
Use only authorized parts (multiplug, battery and memory) and
never disassemble parts.
There is a danger of damaging
the product, electric shock or fire
hazard.
Shut down the computer and
disconnect all cables before
disassembling the computer. If
there is a modem, disconnect
the phone line. If you are using a
notebook computer, make sure
to remove the battery.
Failing to do so, may cause electric
shock.
There is a danger of choking. If a
child has swallowed it, contact a
doctor immediately.
11
Custody and
Movement Related
Follow the instructions for the
relevant location (e.g. airplane,
hospital, etc.) when using a
wireless communication device
(wireless LAN, Bluetooth, etc.)..
When carrying the notebook
computer with other items,
such as the adapter, mouse,
books etc, take care not to press
anything against the notebook
computer.
If a heavy object is pressed
against the notebook computer,
a white stop or stain may appear
on the LCD. Therefore, take care
not to apply any pressure to the
notebook.
In this case, place the notebook
computer in a separate
compartment away from the other
objects.
12
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Installation Related
Battery Usage Related
Do not block the ports (holes),
vents, etc. of the product and
do not insert objects.
Dispose of worn-out batteries
properly.
Damage to a component within
the computer may cause electric
shock or fire.
When using the computer with
it lying on its side, place it so
that the vents face upwards.
Failing to do so, may cause
the internal temperature of
the computer to rise and the
computer to malfunction or halt.
- There is a danger of fire or
explosion.
- The battery disposal method may
differ depending on your country
and region. Dispose of the used
battery in an appropriate way.
Do not throw or disassemble
the battery and do not put it into
water.
This may cause an injury, fire or
explosion.
Do not place a heavy object
over the product.
Use only a battery authorized by
Samsung Electronics.
This may cause a problem with
the computer. In addition, the
object may fall and cause injury,
or damage the computer.
Failing to do so may cause an
explosion.
Avoid contact with metal objects
such as car keys or clips when
keeping or carrying a battery.
13
Contact with a metal may cause
excessive current and a high
temperature and may damage the
battery or cause a fire.
Charge the battery according to
the instructions in the manual.
Failing to do so, may cause and
explosion or fire from damage to
the product.
Do not heat the battery or
expose it to heat (e.g. inside a
vehicle during the summer).
There is a danger of explosion or
fire.
Usage Related
Do not place a candle, lighted
cigar, etc. over or on the product.
There is a danger of fire.
Use a wall outlet or multi-plug
with a grounding part.
Failing to do so may cause electric
shock hazard.
Make sure to have the product
tested by a safety service
engineer after repairing the
product.
Authorised Samsung Repair
Centers will carry out safety checks
after a repair. Using a repaired
product without testing it for safety
might causeelectric shock or fire.
In case of lightning, immediately
turn the system off, disconnect
the power cord from the wall
outlet and line do not use a
modem or phone.
There is a danger of electric shock
or fire.
Do not use your computer and
AC-Adapter on your lap or soft
surfaces.
If the computer temperature
increases, there is a danger of
burning yourself.
Connect only permitted devices
to the connectors or ports of the
computer.
Failing to do so, may cause electric
shock and fire.
Close the LCD panel only
after checking if the notebook
computer is turned off.
The temperature may rise and
it may cause overheating and
deformation of the product.
Do not press the Eject Button
while the Floppy Disk/CD-ROM
drive is in operation.
You might lose data and the disk
might be suddenly ejected and
could cause an injury.
14
Take care not to drop the product
while using it.
This may cause personal injury or
loss of data.
Do not contact the antenna with
electricity facility such as the
power outlet.
There is a danger of electric shock.
When handling computer parts,
follow the instructions on the
manual supplied with the parts.
Failing to do so, may cause damage
to the product.
If the computer emits smoke,
or there is a burning smell,
disconnect the power plug from
the wall outlet and contact a
service center. If your computer
is a notebook computer, make
sure to remove the battery.
There is a danger of fire.
Upgrade Related
Do not use a damaged or
modified CD/Floppy Disk.
There is a danger of damaging the
product or personal injury.
Do not insert your fingers into
the PC Card Slot.
There is a danger of injury or
electric shock.
Use recommended computer
cleansing solution when
cleaning the product and only
use the computer when it is
completed dried.
Failing to do so may cause electric
shock or fire.
Emergency disk eject method
using paperclip should not be
used while the disk is in motion.
Make sure to use the emergency
disk eject method only when the
Optical Disk Drive is stopped.
There is a danger of injury.
Do not place your face close to
the Optical Disk Drive tray when
it is operating.
Take care when touching the
product or parts.
The device may be damaged or
you may be injured.
Take care not to throw or drop
a computer part or device.
This may cause injury or damage
to the product.
Do not place your face close to the
Optical Disk Drive tray when it is
operating.
Make sure to close the
computer cover before
connecting the power after a
reassembly.
Check CDs for cracks and
damage prior to use.
There is a danger of electric
shock if your body touches an
internal part.
It may damage the disc and cause
disorder of device and injury of
user.
Use parts authorized by
Samsung Electronics only.
Failing to do so, may cause fire or
damage the product.
15
Custody and Movement
Related
Never disassemble or repair
the product by yourself.
There is a danger of electric
shock or file.
To connect a device that is not
manufactured or authorized by
Samsung Electronics, enquire
at your service center before
connecting the device.
There is a danger of damaging
the product.
When moving the product, turn
the power off and separate all
connected cables first.
Do not operate or watch the
computer while driving a
vehicle.
The product might be damaged or
users may trip over the cables.
There is a danger of a traffic
accident. Please concentrate on
driving.
For long periods of not using the
notebook computer, discharge
the battery and preserve as it is
detached.
The battery will be preserved at its
best condition.
16
Cautions on Preventing Data Loss
(Hard Disk Management)
Take care not to damage the
data on a hard disk drive.
■ A hard disk drive is so sensitive
to external impact that an
external impact may cause loss
of data on the surface of the
disk.
■ Take extra care, because
moving the computer or an
impact on the computer when
it is turned on may damage the
data of the hard disk drive.
■ The company is not liable for
the loss of any data caused
by customer such as the
carelessness usage or bad
environmental condition.
Causes that may damage the
data of a hard disk drive and the
hard disk drive itself.
■ The data may be lost when an
external impact is applied to
the disk while disassembling or
assembling the computer.
■ The data may be lost when the
computer is turned off or reset
by a power failure while the
hard disk drive is operating.
■ The data may be lost and
irrecoverable due to a computer
virus infection.
■ The data may be lost if the
power is turned off while
running a program.
■ Moving or causing an impact
to the computer while the hard
disk drive is operating, may
cause files to be corrupted or
bad sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive, please
backup your data frequently.
17
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or
distributed ONLY in California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
For details see lamprecycle.org, eise.org, or call 1-800-Samsung.
18
Proper Posture During Computer Use
Maintaining a proper posture during computer use is very important to prevent physical harm.
The following instructions are about maintaining a proper posture during computer use developed through human
engineering. Please read and follow them carefully when using the computer.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious
physical harm may be caused.
Note
The instructions in this manual have been prepared so that they can be applied within the coverage of general users.
If the user is not included in the coverage, the recommendation is to be applied according to the user’s needs.
Proper Posture
■ To use the computer while talking over the telephone,
use a headset. Using the computer with the phone on
your shoulder is bad for posture.
Adjust the heights of desks and chairs appropriate to
your height.
■ Keep frequently used items within a comfortable work
range (where you can reach them with your hands).
The heights are to be adjusted so that your arm forms a
right angle when you place your hand over the keyboard
while sitting down on a chair.
Adjust the height of chair so that your heel is comfortably
placed on the floor.
■ Do not use the computer while you are lying down, but
only while you are sitting down.
■ Do not use the computer on your lap. If the computer
temperature increases, there is a danger of burning
yourself.
■ Work while keeping your wrist straight.
■ Use a chair with a comfortable back.
■ Keep the center of your leg weight not on the chair but
on your feet when you are sitting on a chair.
19
Eye Position
Hand Position
Keep the monitor or LCD away from your eyes by at
least 50cm.
Keep your arm at a right angle as shown by the figure.
m
50c
■ Adjust the height of the monitor and the LCD screen so
that its top height is equal to or lower than your eyes.
■ Keep the line from your elbow to your hand straight.
■ Avoid setting the monitor and LCD excessively bright.
■ Do not hold the mouse with excessive force.
■ Keep the monitor and LCD screen clean.
■ Do not press the keyboard, touchpad or mouse with
excessive force.
■ Do not place your palm over the keyboard while typing.
■ If you wear glasses, clean them before using the
computer.
■ It is recommended connecting an external keyboard
and mouse when using the computer for long periods
of time.
■ When entering contents printed on a paper into the
computer, use a static paper holder so that the height
of the paper is almost equal to that of the monitor.
20
Volume Control
(Headphones and Speakers)
Illumination
■ Do not use the computer in dark locations. The
illumination level for computer use must be as bright so
for reading a book.
Check your volume first to listen to music.
■ Indirect illumination is recommended. Use a curtain to
prevent reflection on the LCD screen.
Operation Condition
Check your
volume!!
■ Do not use the computer in hot and humid locations.
■ Use the computer within the allowed temperature and
humidity range specified in the User Guide.
■ Check if the volume is too loud before using
headphones.
■ It is not recommended using headphones for long
periods of time.
■ Any deviation from the equalizer default setting could
cause hearing impairment.
■ The default setting can be changed through software
and driver updates without your intervention. Please
check the equalizer default setting before first usage.
Use Time (Break Time)
■ Take a break for 10 minutes or more after a 50-minute
period when working for more than one hour.
21
Important Safety Information
Safety Instructions
Your system is designed and tested to meet the latest
standards for safety of information technology equipment.
However, to ensure safe use of this product, it is important
that the safety instructions marked on the product and in
the documentation are followed.
■ Openings in the computer case are provided for
ventilation. Do not block or cover these openings.
Make sure you provide adequate space, at least 6
inches (15 cm), around the system for ventilation when
you set up your work area. Never insert objects of any
kind into the computer ventilation openings.
■ Ensure that the fan vents on the bottom of the casing
are clear at all times. Do not place the computer on a
soft surface, doing so will block the bottom vents.
Always follow these instructions to help guard
against personal injury and damage to your system.
Caution
■ If you use an extension cord with this system, make
sure that the total power rating on the products plugged
into the extension cord does not exceed the extension
cord power rating.
Setting Up your System
■ Read and follow all instructions marked on the product
and in the documentation before you operate your
system. Retain all safety and operating instructions for
future use.
■ Do not use this product near water or a heat source
such as a radiator.
■ Set up the system on a stable work surface.
■ The product should be operated only with the type of
power source indicated on the rating label.
■ Ensure that the electrical outlet you are using to power
your equipment is easily accessible in case of fire or
short circuit.
■ If your computer has a voltage selector switch, make
sure that the switch is in the proper position for your
area.
22
Care During Use
The Instruction On Safety Operation of
NotePC
■ Do not walk on the power cord or allow anything to rest
on it.
1
■ Do not spill anything on the system. The best way to
avoid spills is to not eat or drink near your system.
2
■ Some products have a replaceable CMOS battery on
the system board. There is a danger of explosion if
the CMOS battery is replaced incorrectly. Replace the
battery with the same or equivalent type recommended
by the manufacturer.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement
insure that a qualified technician performs the task.
3
■ When the computer is turned off, a small amount of
electrical current still flows through the computer.
To avoid electrical shock, always unplug all power
cables, remove the battery and modem cables from
the wall outlets before cleaning the system.
4
■ Unplug the system from the wall outlet and refer
servicing to qualified personnel if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly when the operating
instructions are followed.
– The system was dropped or the casing is damaged.
– The system performance changes.
23
When installing and operating devices please refer to
safety requirements in the user guide.
Devices can be used only with the equipment
specified in the technical specifications of the
devices.
If any smell of burning or smoke from the computer
the unit should be switched off and battery removed.
The unit should be checked by a qualified technician
before reuse.
Service and repair of devices should be carried out
by authorized service centers.
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
Caution
Note
Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities,
oxygen rich environments, or industrial areas.
Battery Disposal
Caution
Laser Safety
All systems equipped with CD or DVD drives comply with
the appropriate safety standards, including IEC 60825-1.
The laser devices in these components are classified
as “Class 1 Laser Products” under a US Department
of Health and Human Services (DHHS) Radiation
Performance Standard. Should the unit ever need
servicing, contact an authorized service location.
Do not put rechargeable batteries or products
powered by non-removable rechargeable batteries
in the garbage.
Contact the Samsung Helpline for information on how to
dispose of batteries that you cannot use or recharge any
longer.
Follow all local regulations when disposing of old batteries.
■
THERE IS A RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Caution
Use of controls or adjustments or performance
of procedures other than those specified in
this manual may result in hazardous radiation
exposure. To prevent exposure to laser beams,
do not try to open the enclosure of a CD or DVD
drive.
Caution
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
24
Laser Safety Note:
■
Class 1M laser radiation when operating part is
open.
Do not view directly with optical instruments.
■
Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
General Requirements
Connect and Disconnect the AC
adapter
The requirements listed below are applicable to all
countries:
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
■ The length of the power cord set must be at least 6.00
feet (1.8m) and a maximum of 9.75 feet (3.0m).
Do not unplug the power cord out by pulling the cable
only.
■ All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the
country where the power cord set will be used.
■ The power cord set must have a minimum current
capacity of 7 A and a nominal voltage rating of 125
or 250 volts AC, as required by each countrys power
system.
Power Cord Requirements
■ The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet
C7 connector, for mating with appliance inlet on the
computer.
The power cord set (wall plug, cable and AC adapter plug)
you received with your computer meets the requirements
for use in the country where you purchased your
equipment.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer.
For more information on power cord set requirements,
contact your authorized dealer, reseller, or service
provider.
25
Regulatory Compliance Statements
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz
Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations
while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country
group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please
contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be
allowed.
The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all
international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your
notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer
believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless
device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on and transmitting. (This Statement is not applicable to UMPC(Ultra Mobile PC)
such as PDA, Portable PC.)
This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed
Bluetooth transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
26
■
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that
provide wireless communication.
■
In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to
use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres
are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are
uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the
wireless device.
■
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless
device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any
move or trip for any restrictions on the use of a wireless device in the destination country.
■
If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all
covers and shields are in place and the system is fully assembled.
■
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the
authorization to use it. Please contact manufacturer for service.
■
Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or
contact manufacturer Technical Support for additional information.
Caution
27
United States of America
USA and Canada Safety Requirements
and Notices
Other Wireless Devices
Safety Notices for Other Devices in the Wireless
Network: Refer to the documentation supplied with
wireless Ethernet adapters or other devices in the wireless
network.
Do not touch or move antenna while the unit is transmitting
or receiving.
Do not hold any component containing the radio such that
the antenna is very close or touching any exposed parts
of the body, especially the face or eyes, while transmitting.
Caution
Do not operate the radio or attempt to transmit data
unless the antenna is connected; if not, the radio may be
damaged.
Unintentional Emitter per FCC Part 15
Use in specific environments:
The use of wireless devices in hazardous locations is
limited by the constraints posed by the safety directors of
such environments.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The use of wireless devices on airplanes is governed by
the Federal Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the
limits set forth by each hospital.
Explosive Device Proximity Warning
Caution
Do not operate a portable transmitter (such as a
wireless network device) near unshielded blasting
caps or in an explosive environment unless the
device has been modified to be qualified for such
use.
Use On Aircraft Caution
Caution
The Part 15 radio device operates on a noninterference basis with other devices operating at
this frequency. Any changes or modification to said
product not expressly approved by Intel could void
the user’s authority to operate this device.
Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices
because their signals could interfere with critical
aircraft instruments.
28
Caution
Intentional emitter per FCC Part 15
This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generate uses and can
radiate radio frequency energy and if not installed
and used in accordance with the instructions may
cause harmful interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment
and receiver.
■
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
■
Consult the dealer or an experienced radio/TV
technician for help.
Low power, Radio LAN type devices (radio frequency (RF)
wireless communication devices), operating in the 2.4
GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are
present. Refer to the system label to verify the presence
of wireless devices.
Wireless devices that may be in your system are only
qualified for use in the United States of America if an FCC
ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches)
separation between the device and the body, for use of
a wireless device near the body (this does not include
extremities). This device should be used more than 20
cm (8 inches) from the body when wireless devices are
on. The power output of the wireless device (or devices),
which may be embedded in your notebook, is well below
the RF exposure limits as set by the FCC. (This Statement
is not applicable to UMPC(Ultra Mobile PC) such as PDA,
Portable PC.)
This transmitter must not be collocated or operate in
conjunction with any other antenna or transmitter except
the installed Bluetooth transmitter.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional suggestions. The user may find the following booklet helpful:
“Something About Interference.”
Operation of this device is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation of the device.
This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this
equipment or the substitution or attachment of connecting
cables and equipment other than those specified by our
company. The correction will be the responsibility of the
user. Use only shielded data cables with this system.
29
The REN is used to determine the quantity of devices
which may be connected to telephone line. Excessive
RENs on the telephone line may result in the devices
not ringing in response to an incoming call. In most, but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be
connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum
REN for the calling area.
Wireless devices are not user serviceable. Do not
modify them in any way.
Caution
Modification to a wireless device will void the
authorization to use it. Contact manufacturer for
service.
FCC Statement for Wireless LAN use:
Caution
“While installing and operating this transmitter and
antenna combination the radio frequency exposure
limit of 1mW/cm2 may be exceeded at distances
close to the antenna installed. Therefore, the user
must maintain a minimum distance of 20cm from
the antenna at all times.
If the terminal equipment causes harm to the telephone
network, the Telephone Company will notify you in
advance that temporary discontinuance of service may
be required. But if advance notice is not practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
This device can not be colocated with another
transmitter and transmitting antenna.” (This
Statement is not applicable to UMPC(Ultra Mobile
PC) such as PDA, Portable PC.)
The telephone company may make changes in its
facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens,
the telephone company will provide advanced notice in
order for you to make necessary modifications to maintain
uninterrupted service.
FCC Part 68
(If fitted with a modem device.)
This equipment compiles with part of the FCC rules.
On the back of this equipment is a label that contains,
among other information, the FCC registration number
and ringer equivalence number (REN) for this equipment.
If requested, this information must be provided to the
telephone company.
If trouble is experienced with this equipment (Modem)
for repair or warranty information, please contact your
local distributor. If the equipment is causing harm to the
telephone network, the telephone company may request
that you disconnect the equipment until the problem is
resolved.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network or promises
wiring using a compatible modular jack which is Part 68
compliant. See Installation Instructions for details.
The user must use the accessories and cables supplied
by the manufacturer to get optimum performance from the
product.
No repairs may be done by the customer.
30
Canada
Unintentional Emitter per ICES-003
This equipment cannot be used on public coin phone
service provided by the telephone company. Connection
to party line service is subject to state tariffs.
This digital apparatus does not exceed the Class B limits
for radio noise emissions from digital apparatus as set out
in the radio interference regulations of Industry Canada.
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any
message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on
the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or
other individual sending the message and the telephone
number of the sending machine or such business, other
entity, or individual. (The telephone number provided may
not be any number for which charges exceed local or
long-distance transmission charges.)
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limitesapplicables aux
appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par
Industrie Canada.
Intentional Emitter per RSS 210
Low power, Radio LAN type devices (radio frequency (RF)
wireless communication devices), operating in the 2.4
GHz Band, may be present (embedded) in your notebook
system. This section is only applicable if these devices are
present. Refer to the system label to verify the presence
of wireless devices.
In order to program this information into your fax machine,
refer to your communications software user manual.
Wireless devices that may be in your system are only
qualified for use in Canada if an Industry Canada ID
number is on the system label.
As a general guideline, a separation of 20 cm (8 inches)
between the wireless device and the body, for use of
a wireless device near the body (this does not include
extremities) is typical. This device should be used more
than 20 cm (8 inches) from the body when wireless
devices are on.
The power output of the wireless device (or devices),
which may be embedded in your notebook, is well below
the RF exposure limits as set by Industry Canada.
31
This transmitter must not be collocated or operate in
conjunction with any other antenna or transmitter except
the installed Bluetooth transmitter.
with a single-line individual service may be extended by
means of a certified connector assembly. The customer
should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Operation of this device is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation of the device.
Caution
Caution
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user
to disconnect the equipment.
To prevent radio interference to licensed service,
this device is intended to be operated indoors and
away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Users should make sure, for their own protection, that
the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if
present, are connected together. This precaution may be
particularly important in rural areas.
Wireless devices are not user serviceable. Do not
modify them in any way. Modification to a wireless
device will void the authorization to use it. Contact
manufacturer for service.
Caution
Telecommunications per DOC notice
(for products fitted with an IC-compliant
modem)
To avoid electrical shock or equipment malfunction
do not attempt to make electrical ground
connections by yourself. Contact the appropriate
inspection authority or an electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to
each terminal device provides an indication of the maximum number of terminals allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operation, and
safety requirements. The Department does not guarantee
the equipment will operate to the users’ satisfaction.
Before installing this equipment, users should make sure
that it is permissible to be connected to the facilities of
the local telecommunications company. The equipment
must also be installed using an acceptable method of
connection. In some cases, the inside wiring associated
32
European Union
European Union CE Marking and
Compliance Notices
European Radio Approval Information (for
products fitted with EU-approved radio
devices)
Products intended for sale within the European Union are
marked with the Conformité Européene (CE) Marking,
which indicates compliance with the applicable Directives
and European standards and amendments identified
below. This equipment also carries the Class 2 identifier.
The following information is only applicable to systems
labeled with the CE mark
.
This Product is a Notebook computer; low power,
Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz band,
may be present (embedded) in your notebook system
which is intended for home or office use. This section is
only applicable if these devices are present. Refer to the
system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only
qualified for use in the European Union or associated
areas if a CE mark
with a Notified Body Registration
Number and the Alert Symbol is on the system label.
European Directives
This Information Technology Equipment has been
tested and found to comply with the following European
directives:
The power output of the wireless device or devices that
may be embedded in you notebook is well below the
RF exposure limits as set by the European Commission
through the R&TTE directive.
■ EMC Directive 89/336/EEC with amending
directives 92/31/EEC & 93/68/EEC as per
–
–
–
–
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 55024
Caution
■ Low Voltage Directive (Safety) 73/23/EEC as per EN
60950(A1/A2/A3/A4/A11)
■ Radio and Telecom Terminal Equipment Directive
199/5/EC as per
– CTR21 (if fitted with a modem device)
– ETS 300 328 (if fitted with a 2.4 GHz band embedded
wireless device)
– ETS 301 489-1 (if fitted with a 2.4 GHz band embedded
wireless device)
– ETS 301 489-17 (if fitted with a 2.4 GHz band embedded
wireless device)
33
See 802.11b and 802.11g restrictions for specific
countries or regions within countries under the
heading “European Economic Area Restrictions”
below.
Translated Statements of Compliance
[Spanish]
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
[Swedish]
Denna produkt har tillverkats i enlighet med EG-direktiv
1999/5/EC.
[English]
This product follows the provisions of the European Directive 1999/5/EC.
[Danish]
Dette produkt er i overensstemmelse med det europæiske
direktiv 1999/5/EC
[Dutch]
Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC.
[Finnish]
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
[French]
Ce produit est conforme aux exigences de la Directive
Européenne 1999/5/EC.
[German]
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC
[Greek]
Το προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής
Οδηγίας 1999/5/ΕC.
[Icelandic]
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC
[Italian]
Questo prodotto è conforme alla Direttiva Europea
1999/5/EC.
[Norwegian]
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
[Portuguese]
Este produto cumpre com as normas da Diretiva Européia
1999/5/EC.
European Economic Area Restrictions
Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on
local restrictions must be published in all end-user
documentation provided with the system or product
incorporating the Intel PRO/Wireless 2200BG Network
Connection product.]
Caution
Due to the fact that the frequencies used by
802.11b/802.11g wireless LAN devices may not yet
be harmonized in all countries, 802.11b/802.11g
products are designed for use only in specific
countries or regions, and are not allowed to be
operated in countries or regions other than those of
designated use.
As a user of these products, you are responsible
for ensuring that the products are used only in the
countries or regions for which they were intended
and for verifying that they are configured with the
correct selection of frequency and channel for
the country or region of use. Any deviation from
permissible settings and restrictions in the country
or region of use could be an infringement of local
law and may be punished as such.
The European variant is intended for use throughout the
European Economic Area. However, authorization for use
is further restricted in particular countries or regions within
countries, as follows:
34
European Telecommunication Information
(for products fitted with EU-approved
modems)
General
European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power
(EIRP) and the frequency range 2400 – 2483.5 MHz.
Marking by the symbol
indicates compliance of this
equipment to the Radio and Telecom Terminal Equipment
Directive 1999/5/EC. Such marking is indicative that
this equipment meets or exceeds the following technical
standards:
Belgium
The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from
the BIPT is required.
This restriction should be indicated in the manual as follows:
CTR 21 - Attachment requirements for pan-European
approval for connection to the analogue Public Switched
Telephone Networks (PSTNs) of TE (excluding TE
supporting voice telephony services) in which network
addressing, if provided, is by means of Dual Tone MultiFrequency (DTMF) signaling.
Dans le cas d’une utilisation privée, à l’extérieur d’un
bâtiment, au-dessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de
300m. Pour une distance supérieure à 300m un enregistrement auprès de l’IBPT est requise. Pour une utilisation
publique à l’extérieur de bâtiments, une licence de l’IBPT
est requise. Pour les enregistrements et licences, veuillez
contacter l’IBPT.
Caution
Although this equipment can use either loop
disconnect (pulse) or DTMF (tone) signaling, only
the performance of the DTMF signaling is subject to
regulatory requirements for correct operation.
It is therefore strongly recommended that the
equipment is set to use DTMF signaling for access
to public or private emergency services. DTMF
signaling also provides faster call setup.
France
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.454 GHz (channels 1 to 7) for outdoor use.
This equipment has been approved to Council Decision
98/482/EEC - “CTR 21” for Pan-European single terminal
connection to the Public Switched Telephone Network
(PSTN).
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor use.
However, due to differences between the individual
PSTNs provided in different countries, the approval
does not, of itself, give an unconditional assurance of
successful operation on every PSTN termination point. In
the event of problems, you should contact manufacturer
Technical Support.
For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use.
2.420 - 2.4835 GHz for outdoor use (channels 5 to 13)
35
WEEE SYMBOL INFORMATION
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
36
Overview
Before You Start!
■
*
The items marked with this symbol are optional items which may be changed or may not be provided depending on the
computer model.
■ The actual color and appearance of the computer may differ from the pictures used in this guide.
Front View
11 Camera Lens*
Using this lens, you can take still pictures and
record video.
1 LCD
The screen images are displayed here.
10 Power Button
2 Keyboard
Turns the computer on and off.
p. 43
A device to enter data by pressing the
keys. p. 45
9 AV Button
Launches AVStation Now.
p. 131
3 Microphone*
4 Status Indicators
8 Touchpad/Touchpad Buttons
Shows the operating status of the
computer. The corresponding operating
LED is lit when the corresponding function
operates. p. 38
The touchpad and touchpad buttons provide
functions similar to the mouse ball and
buttons. p. 48
7 Multi Card Slot*
5 Headphone Jack (S/PDIF Support)
You can connect a headphone or S/PDIF (digital
output, optical cable support) cable. You can
connect to an external digital amplifier using this
port and enjoy multi-channel surround sound.
6 Microphone Jack
A card slot that supports Memory Stick,
Memory Stick Pro, SD Card, MMC, MMC
Plus and xD cards.
A jack used to connect the microphone.
37
Status Indicators
1 Num Lock
This turns on when the Num Lock key is
pressed and numeric keypad is activated.
p. 46
2 Caps Lock
This turns on when the Caps Lock key
is pressed allowing capital letters to be
typed without holding the Shift button
down.
3 Power
This shows the computer operating
status.
On : When the computer is operating
Blinks: When the computer is in Sleep
mode.
4 Charge Status
This shows the power source and the
battery charge status.
Green: When the battery is fully
charged or the battery is not installed.
Amber: When the battery is being
charged.
Off: When the computer is running on
battery power without being connected
to AC adapter.
5 Wireless LAN
This turns on when the wireless LAN
is operating.
6 HDD
This turns on when the hard disk is
being accessed.
7 Scroll Lock
38
This turns on when the Scroll Lock key is
pressed and screen scroll is locked. p. 46
Right View
2 USB Port
You can connect USB devices to the USB port
such as a keyboard/mouse, digital camera, etc.
1 Fan Vents
The internal heat of the computer is emitted through these holes.
Caution
4 Modem Port*
If the vents are blocked the computer may overheat.
Avoid blocking the vents as this may be dangerous.
A port to which a telephone
cable is connected to in order
to dial up to the Internet.
3 Monitor Port
A port used to connect a monitor, TV or projector
supporting a 15pin D-SUB interface. p. 61
39
Left View
3 PCI ExpressCard Slot
Install the PCI Express card into this
slot.
2 CD Drive(ODD)*
Plays CD or DVD titles.
Since an ODD drive is optional, the installed drive
depends on the computer model. p. 51
1 Wired LAN Port*
Connect the Ethernet cable to this port.
p. 95
40
Back View
1 DC Jack
A jack to connect the AC adapter that supplies
power to the computer.
4 Security Lock Port
You can connect a Kensington lock to the
Security Lock Port to prevent the computer from
being stolen.
2 Battery
This is a Lithium-Ion rechargeable battery that
supplies power to the computer. p. 144
41
3 USB Port
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
Bottom View
1 Battery Latches
The latch used to remove or install the battery.
2 Hard Disk Drive Compartment Cover
The hard disk drive is installed inside the cover.
3 Memory Compartment Cover
The main memory is installed inside the cover.
42
p. 142
p. 144
Turning the Computer On and Off
Turning the computer on
1
2
3
4
Turning the computer off
1
Install the battery and connect the AC adapter.
(Refer to the Installation Guide.).
Lift the LCD panel up.
2
Press the Power button to turn the computer on.
Click the Start (
Click the (
) and click on Shut down.
The computer will shut down.
1
Power button LED is lit while the computer is turned
on.
Note
■
■
Power
Button
2
3
Before Using the Power Button
Note
■
) button on the taskbar.
Since the Power Icon is set to power saving mode,
), will cause
selecting Start > Power Button (
the computer to enter Sleep mode.
To shut down the computer by clicking this icon,
refer to the descriptions for Setting up Start menu
power button of the Control Panel. p. 87
If you press and release the Power button on
the computer when it is on, the computer enters
Sleep mode.
When running the computer on battery power,
the LCD brightness is dimmed automatically to
save battery power. Press the Fn+ (
) key to
increase the LCD brightness. p. 47
Caution
When turning the computer on for the first time,
the Register Windows screen appears. You can
use the computer after registering your user
information.
43
When the system cannot be shut down due to a
system error, turn it off by pressing and holding the
Power Button for longer than 4 seconds.
However, turning the computer off by this method
may cause a system problem. Thereafter, when
turning the computer back on, the disk checking
program may launch to check for and correct any
disk errors.
Chapter 2.
Using the computer
Keyboard
45
Touchpad
48
CD Drive (ODD)
51
InsertingandEjectingaCD
51
BurningaCD
5
HDDVD(Optional)
5
Blu-Ray(Optional)
5
Multi Card Slot
57
PCI ExpressCard Slot
60
Connecting a Monitor
61
ConnectingaMonitor
61
ViewingThroughaMonitor
61
UsingDualView
6
Adjusting the Volume
64
Using Digital Output (S/PDIF)
66
Keyboard
The keyboard is supplied according to the corresponding country. Refer to the keyboard figure for the corresponding country.
United Kingdom
United States
45
Shortcut Keys
You can use the following functions by pressing the keys below with the Fn key.
Fn+
Name
REST
(Sleep Mode)
Gauge
Euro
CRT/LCD
Backlit
Mute
Function
Switches to Sleep mode. To wake the computer up, press the Power button.
Shows the remaining battery charge.
You can only use this function when the Easy Display Manager program is installed.
Enters the Euro monetary unit symbol.
This key may not be provided depending on the keyboard type.
Switches the screen output to the LCD or external monitor when an external monitor (or TV) is
connected to the computer. p. 61
Turns the LCD backlight on or off.
Mutes or cancels mute.
Samsung Magic System diagnosis, recovery and Internet consultation program, Samsung Magic Doctor, will be
launched.
Doctor
Easy SpeedUp
Manager
You can select operation mode when you need maximum system performance or low-noise/low
power consumption with one-click.
■ Silent: Low-noise and low power consumption mode
■ Normal: Normal Mode
■ Speed: Maximum performance mode. The system operates in its maximum performance,
and system resources are allocated to the currently active program with priority for maximum
performance.
Wireless LAN
Turns the wireless LAN function on or off in models with wireless LAN capability.
Touchpad
Turns the Touchpad function on or off.
When using an external mouse only, you can turn the Touchpad off.
Num Lock
Turns the numeric keyboard on or off.
Scroll Lock
If you turn the Scroll Lock on, you can scroll the screen up or down without changing the cursor
location in some applications.
46
Screen Brightness Control
Other Function Keys
To adjust the LCD brightness press the Fn + (
) key
combination or the Fn + (
) key combination. The
changed screen brightness is displayed at the center of
the screen for a moment.
■ Application Key (
)
Performs the right-click mouse function (touchpad).
Volume Control
To control the volume, press the Fn + (
) key
combination or the Fn + (
) key combination.
You can mute the sound or cancel the mute function by
clicking the Fn + (
) key combination.
Numeric Key
The numbers are printed in blue on the numeric keys.
If Num Lock is turned on by pressing the Fn + (
) key
combination, you can use the numeric keys to enter digits.
47
Touchpad
The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of
the left and right buttons of a mouse.
Before You Start!
■
Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad.
■
If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended.
Touchpad
Use to move the cursor.
Scroll Area
Touchpad Left Button
Touchpad Right Button
Plays the role of the mouse wheel.
You can scroll up and down using the
Scroll Area.
Plays the role of the right mouse
button.
You can select or run a program
using this button.
48
Moving the cursor on the screen
Double-Click Function
Place your finger on the touchpad slightly and move your
finger. The mouse cursor will move accordingly. Move
your finger in the direction you wish to move the cursor.
Put your finger on the touchpad and quickly tap twice with
your finger on an item you want.
Alternatively, press the left touchpad button twice quickly.
TapTap
ClickClick
or
Click Function
Right Button Function
Place your finger on the touchpad and tap your finger
once over an item you want.
Alternatively, press the left touchpad button once.
This corresponds to clicking the right mouse button.
Press the right touchpad button once. The corresponding
pop-up menu appears.
Tap
Click
Click
or
49
Drag Function
Touchpad On/Off Function
Dragging refers to moving an item to another place after
selecting it.
If you want to use the mouse only without using the
touchpad, you can turn the touchpad off.
To lock the touchpad function, press the Fn + (
) keys.
Press and hold down the left touchpad button over an
item you want to drag and move the item to the new
location.
Move
Note
Holding down the left
touchpad button
Touchpad Scroll Function
The touchpad scroll area provides the mouse wheel
function (scroll function).
Place your finger on the touchpad’s right edge for vertical
scrolling or the bottom edge for horizontal scrolling and
then move your finger along the edge to scroll the screen
vertically or horizontally.
50
You can set the touchpad and touchpad button
settings in the tabs that appear when clicking Start >
Control Panel > Hardware and Sound > Mouse.
CD Drive (ODD)
An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer
to the catalogue.
Before You Start!
One of the following optical disk drives is installed on this computer.
Drive Type
Function
RW-Combo
You can read CDs and DVDs, and burn a CD.
DVD Super Multi
You can read CDs and DVDs, and burn CDs and DVDs.
Supported DVD recording types include DVD±R, DVD±RW, DVD-RAM.
HD-DVD (Optional)
You can read HD DVD-ROM, HD DVD-R and HD DVD-RW disks and burn data to HD DVD-R
and HD DVD-RW disks.
Blu-Ray (Optional)
You can read BD-ROM, BD-R and BD-RE disks and burn data to BD-R and BD-RE disks.
Caution
■
Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed.
■
When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.
■
Do not eject a CD when the CD operating LED is on.
■
HD-DVD and Blu-Ray drives are provided for some models only.
Inserting and Ejecting a CD
1
Click the Eject button of the optical disk drive at the
side of the computer.
Status Indicator
Emergency Hole
Eject Button
51
2
When the CD tray pops out, insert a CD or DVD until
it clicks.
Burning a CD
If your computer has a writable CD drive, you can write
data onto a CD or DVD or burn an audio CD.
CyberLink DVD Suite is supplied with the System
Software Media (or an additional CD) so that you can
burn a CD using the program.
Install the provided software and use the software
functions referring to the software help.
3
Push the CD tray inward until it clicks.
The CD drive status indicator is turned on.
Note
■
A CD drive’s reading and writing speed may
differ depending on the condition and type of the
media.
■
To eject a CD when the CD drive does not work
or the computer is off, place the end of a paper
clip (
) into the Emergency Hole until the
CD tray is ejected.
52
HD DVD (Optional)
HD-DVD is a next generation storage media that can save more data than the existing DVD format.
You can record and play better quality HD movies than the existing SD-grade DVD format.
Type
HD DVD
DVD
CD
Storage Capacity
15 GB / 30 GB
4.7 GB / 8.5 GB
0.65 GB
Data Rate
36.55 Mbps
11.08 Mbps
7.8 Mbps
Supported Resolution
1920 X 1080(i)
720 X 480
320 X 240
Logo
* Date Rate: The amount of data that can be read or written onto a storage media per second.
Supported Disk Types
HD DVD supports the following disk types.
Type
HD DVD-ROM
HD DVD-R
HD DVD-RW
Function
Reads HD DVD disks.
Reads HD DVD disks and writes data onto HD DVD disks once.
Reads and writes to rewritable HD-DVD media.
53
About HD DVD
The CyberLink HD DVD Solution program is provided
so that users with HD-DVD Drives can conveniently and
easily record multimedia files and other data onto HD DVD
disks.
For a more detailed description of the functions, refer to
the help section of the corresponding program.
1
Select Start > All Programs > CyberLink HD
DVD Solution > CyberLink HD DVD Solution.
Alternatively, double-click the CyberLink HD DVD
Solution (
2
Favorites
You can save functions for
frequently used menus.
Movie Player
You can play DVD/HD DVD video
files.
Data
You can format or write data onto
CD/DVD disks.
Music
You can burn an audio CD or a
data CD/DVD with MP3 and WMA
files, and you can rip an audio CD.
Video&Photo
You can burn a VCD, SVCD and
DVD title, edit videos and photos,
create a Slide Show, and burn a
DVD folder.
Copy&Backup
You can copy DVD or CD data.
Utility
You can extract, burn or delete disk
images, and print labels.
) icon on the Desktop.
A user registration screen appears. Enter information
such as your name, surname, e-mail address, etc.
and click the Register Now button. The CyberLink
HD DVD Solution screen appears.
Menu
Menu Functions
54
Blu-Ray (Optional)
Blu-Ray is a next generation storage media that can save approximately 5 to 10 times more data than the existing DVD
format. You can record and play better quality HD movies than the existing SD-grade DVD format.
Type
Blu-Ray
DVD
CD
Storage Capacity
25 GB / 50 GB
4.7 GB / 8.5 GB
0.65 GB
Data Rate
36 Mbps
11.08 Mbps
7.8 Mbps
Supported Resolution
1920 X 1080(i)
720 X 480
320 X 240
Logo
* Date Rate: The amount of data that can be read or written onto a storage media per second.
Supported Disk Types
Blu-Ray supports the following disk types.
Type
BD-ROM
BD-R
BD-RE
Function
Reads Blu-Ray disks.
Reads Blu-Ray disks and writes data onto Blu-Ray disks once.
Reads and writes to rewritable Blu-Ray media.
This only supports BD-R Ver 1.1 and BD-RE Ver 2.1 or later.
55
About Blu-Ray
The CyberLink BD Solution (hereafter CBDS) program
is provided so that users with Blu-Ray Drives can
conveniently and easily record multimedia files and other
data onto Blu-Ray disks.
For a more detailed description of the functions, refer to
the help section of the corresponding program.
1
2
Select Start > All Programs > CyberLink BD
Solution > CyberLink BD Solution. Alternatively,
double-click the CyberLink BD Solution (
on the Desktop.
) icon
A user registration screen appears. Enter information
such as your name, surname, e-mail address, etc.
and click the Register Now button. The CyberLink
Favorites
You can save functions for
frequently used menus.
Movie Player
You can play DVD video files.
Data
You can format or write data onto
CD/DVD Blu-Ray disks.
Music
You can burn an audio CD or a
data CD/DVD with MP3 and WMA
files, and you can rip an audio CD.
Video&Photo
You can burn a VCD, SVCD and
DVD title, edit videos and photos,
create a Slide Show, and burn a
DVD folder.
Copy&Backup
You can copy Blu-Ray DVD or CD
data.
Utility
You can extract, burn or delete
disk images, and print labels.
BD Solution screen appears.
Menu
Menu Functions
56
Multi Card Slot
Using the multi card slot, you can read and write data to a Memory Stick, Memory Stick Pro, SD card, MMC, MMC
Plus, and xD card.
You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital
camera, digital camcorder, MP3, etc.
Before You Start!
■
A multi card slot is optional and is provided for some models only.
■
You have to additionally purchase a multi card with the necessary capacity depending on your requirements.
■
You can use a multi card just like any data storage device. A copyright protection function is not supported.
■
Since you can lose a card when moving the computer, keep the card separately.
Supported Cards
Memory Stick
MMC
Memory Stick Pro
MMC plus
SD Card
xD Card
Please check if your computer supports a SDHC card against the card damage caused by improper use.
Caution
57
3
To Insert and Use a Memory Card
1
Insert a card into the slot according to the directions
printed on the slot.
You can save, move and delete data by doubleclicking the corresponding drive.
Example) SD Card
2
The card drive appears. Click Open folder and view
files. If the window does not appear, click Start >
Computer.
Note
The device name of the card drive may differ
depending on your computer model.
Since you can only use the card after formatting it,
if it is not formatted, format the card referring to the
descriptions of “Formatting a card”. p. 59
Using a Memory Stick Duo, Mini SD and RS-MMC
Note
Since the above cards are too small, you cannot
insert the cards into the slot directly.
Insert the card into the dedicated adapter (available
from most electronic retailers) and then insert the
adapter into the multi card slot.
Due to compatibility issues, some adapters may not
properly recognize Memory Stick Duo and RS-MMC cards, please check with the vendor of the adapter
for compatibility issues.
Note
If a window asking to scan and change appears,
click Continue Without Scanning. This will proceed
to Step 2 above.
58
To remove a memory card
1
2
Push the tip of the card lightly.
Caution
You have to format a card first to use it.
Caution
2
3
To use a card to exchange data with a digital
device such as a digital camera, formatting the
data using the digital device is recommended.
■
When you try to use a card, which is formatted in
the computer, in another digital device, you may
have to format the card again in the device.
■
You cannot format, write or delete data from
a Memory Stick, Memory Stick Pro, SD card
with a write protection tab when it is in the Lock
position.
■
Inserting and removing a memory card
repeatedly may damage the memory card.
■
If you remove the multi memory card using
the Safely Remove Hardware icon ( ) in the
Taskbar, you will not be able to use the multi
memory card. To use the multi memory card
again, restart the computer.
If the card pops up with a clicking sound, remove the
card.
To format a memory card
1
■
Formatting a card deletes all data saved on the
card. If the card includes data, backup the data
before formatting it.
Click Start > Computer.
Right-click over a card drive with the touchpad and
select Format.
Click Start to the formatting.
59
PCI ExpressCard Slot
You can use PCI Express cards using this slot.
The PCI ExpressCard slot can be regarded as the next generation PCMCIA card specification and supports LAN, TV
Tuner and Sound cards. This computer’s slot supports the Express Card/34 and Express Card/54 specifications.
Before You Start!
■
Remove the dummy card installed to protect the slot first. Lightly push the dummy card of the slot. The dummy card pops up.
Eject the dummy card.
■
This slot is a PCI ExpressCard slot. You cannot connect a PCMCIA card here.
To insert a card
To remove a card
1
1
Insert a card into the slot on the side of the
computer.
2
PCI ExpressCard Slot
2
If you insert a card into the slot, Windows recognizes
the card automatically or a message telling
you to install a driver appears. If the card is not
automatically recognized, install the device driver
supplied with the card.
Note
60
Select the card to be removed and click Stop.
3
If the Stop a Hardware device window appears,
click the OK button.
4
Push the card in the slot lightly.
Then the card pops up.
5
If a window asking whether you want to scan and
change appears, click on Continue Without Scan.
This will proceed to Step 2 above.
Double-click the Safely Remove Hardware icon (
on the taskbar.
Eject the card.
)
Connecting a Monitor
Using an external display device is useful when you are giving a presentation or watching a video or movie through
your monitor.
Before You Start!
You have to buy a connection cable additionally.
Connecting a Monitor
Viewing Through a Monitor
Connect the monitor to the Monitor port.
You can switch the display device using the shortcut key.
Switching the Display Device using the
Shortcut Key
Press the Fn + (
) key combination once. Then the
Easy Display Manager screen appears in which you can
select a display device.
) key while holding down the
Whenever you press the (
Fn key, the selected option is changed.
Note
Example) Selecting LCD+CRT Clone
You can also connect a TV or projector supporting a
monitor port (15-pin, D-Sub).
LCD: Notebook Screen
CRT: External Monitor Screen
Note
LCD+CRT Clone : Notebook+ External Monitor
Screen
What is Clone?
Clone is a display feature that enables you to view
the same picture on both display devices.
61
Using Dual View
2
Dual View enables users to expand their computer screen
over two display devices.
Dual View is convenient when a wide operating space is
needed. In addition, since Dual View operates as if there
are 2 graphic cards present even when there is only one,
you can set the resolution and color for each display
device.
Selecting Dual View
Check if the external display device is properly connected
and follow the instructions below.
1
Click the Start > Control Panel > Appearance and
Personalization > Adjust screen resolution.
62
Click on the number 2 monitor icon and select
Extend the desktop onto this monitor. Click Apply
and then click the OK button.
3
Using Window in Dual View
When notebook LCD is set as the main device, the
1 digit is displayed over it and the 2 digit is displayed
over the auxiliary display device. Now you can
expand the Desktop screen over 2 display devices.
Click on the window title bar of the main LCD (monitor
number 1) and drag it into the auxiliary display device
(monitor number 2) to move the window.
When using Dual View, it is recommended setting
the LCD as the main device (number 1).
()
Canceling Dual View
If the resolution of the auxiliary display device is
640×480 pixels with 256 colors, click the Start >
Control Panel > Appearance and Personalization
> Adjust screen resolution > Monitor Number 2
and adjust the resolution and color quality.
1
2
63
Click the Start > Control Panel > Appearance and
Personalization > Adjust screen resolution.
Click on the Monitor Number 2 icon, unselect Extend
the desktop onto this monitor, and then click
Apply.
Adjusting the Volume
You can adjust the volume using the keyboard and the volume control program.
Adjusting the Volume using the Keyboard
Press the Fn + (
) key combination or Fn + (
combination to adjust the volume.
Press the Fn + (
on or off.
Adjusting the Volume using the Volume
Adjustment Program
) key
Click the Volume icon ( ) on the taskbar and slide the
volume control bar to adjust the volume.
) key combination to turn the volume
Mute
Alternatively, right-click over the Volume icon ( ) and
select Open Volume Mixer to adjust the volume.
64
Using the Sound Recorder
Using EDS
The procedures to record sound using the Windows
Recorder are described below.
The EDS function enables you to experience more
stereophonic sound using stereo speakers.
1
1
2
3
4
Connect a microphone to the microphone jack.
Right-click over the Volume icon (
and select Recording Device.
2
) on the taskbar
3
Check if the microphone is set as the default
recording device.
If this is the case, it is already set as the default
device. If not, right-click over the microphone and
select Set default.
Right-click over the Volume icon (
and select Playback Devices.
Select Speaker in the Play tab and click Properties.
Select the Samsung EDS tab in the Speaker
Properties window.
Select the Enable Samsung EDS (Enhanced
Digital Sound) option.
Select a mode.
Click OK. You will be able to experience a more
stereophonic sound in the selected mode.
Click Start > All Programs > Accessories > Sound
Recorder and click Start recording to start a
recording.
Note
65
) in the Taskbar
The function is only supported for a computer’s built-in
speakers and headphones.
Using Digital Output (S/PDIF)
You can enjoy 5.1 channel surround sound by using the Headphone/S/PDIF jack.
Before You Start!
To listen to 5.1 channel surround sound, follow the procedures below.
■
Connect to a 5.1 channel speaker system using the Headphone/S/PDIF jack.
■
Select Digital Output (S/PDIF) in the DVD player program and play a DVD title.
What is Digital Output (S/PDIF)?
S/PDIF is a method to output digital sound and is also called Digital Output.
If you connect a 5.1 channel speaker system to the S/PDIF jack, you can enjoy audio without distortion since the signal is
transferred digitally.
5.1 channel surround sound consists of 6 speakers in total: center, front left/right, rear left/right, and woofer.
Since a woofer speaker is a special speaker for bass output only, we call the system a 5.1 channel system and a 6
channel system.
Digital
Amplifier
TV
Front Left Speaker
Sub
Woofer
Front Right Speaker
Computer
Center
Speaker
Surround Left Speaker
Surround Right Speaker
66
Connecting 5.1 Channel Speakers
1
Connect the S/PDIF cable to the S/PDIF jack and connect the other end of the cable to the 5.1 channel speaker
system.
S/PDIF
5.1 Channel Speakers
Decoder
S/PDIF Cable
Note
2
■
Since the procedures to connect a 5.1 channel speaker system may differ depending on the system model, refer to the
relevant product manual. A 5.1 channel speaker system consists of 6 speakers, an amplifier, and a decoder.
■
If you have a S/PDIF optical cable with square connectors on both ends, you need to purchase an additional cable with
round connector.
After connecting the speaker system, set the speaker’s input mode to Digital Output.
67
Selecting Digital Output in the DVD Player Program.
Since the sound setting is set to Digital Output by default, you do not additionally need to configure it for digital output.
You can confirm your settings as follows.
1
2
3
4
If the CyberLink PowerDVD program is not installed, install the program using the system software media (or
additional CD depending on the computer model).
Launch CyberLink PowerDVD and click Configure.
Change the Speaker Environment value to Use S/PDIF in the Audio tab.
Insert and play a DVD title. You can listen to S/PDIF sound.
Note
For some DVD titles, you can listen to more realistic sound if you additionally select S/PDIF from the Setup menu of the DVD
title.
68
Chapter 3.
Using Microsoft
Windows Vista
About Microsoft Windows Vista
70
WelcomeCenter
70
HelpandSupport
71
Windows Vista Screen Layout
72
Desktop
7
StartMenu
7
Sidebar/Gadget
7
Window
79
Control Panel
82
OpeningtheControlPanel
8
UserAccounts
8
PhishingFilter
89
Usercontrolfunction
91
WindowsMobileCenter
9
The screen shots used in this chapter may differ from actual screens depending on the Windows Vista version
and model.
About Microsoft Windows Vista
Microsoft Windows Vista (hereafter Windows) is a computer operating system. Since you have to learn how to use
it in order to use the computer efficiently and effectively, use the Welcome Center and Windows Help and Support
to learn about Windows Vista.
The screen layout may differ depending on the computer model and the operating system.
Note
Welcome Center
In the Welcome Center, you can view brief descriptions of Windows Vista functions and run the functions directly.
Click Start > Welcome Center.
1
2
If you click on an item, information on the function is displayed in the description window.
For example, if you click View computer details, your computer information is displayed in the description window.
In addition, click on Show More details, for more detailed information.
2
Description Window
1
Windows Vista Demo
Note
If you click Start > Welcome Center > Show all X items > Windows Vista Demo, you can watch the Windows Vista
introduction movie.
70
Help and Support
Windows Help and Support provides information on Windows basic functions and usages.
Click Start > Help and Support.
You can find help for frequently used basic functions using Find an Answer and you can search for help by entering a
keyword in the Search box.
Help Search
Find an Answer
Windows Basics
Introduces the basic usage of the computer and the Windows operation system.
You can learn tasks and tools necessary to use the computer.
Security and
Maintenance
You can view help on computer protection and security.
Windows Online Help
If your computer is connected to the Internet, you can view the necessary information online.
Table of Contents
The help pages are arranged by subject so that users can easily find the relevant information.
Troubleshooting
You can view possible problems that may occur while using Windows and solutions to the
problems.
What’s new?
You can view help for new Windows Vista features.
71
Windows Vista Screen Layout
Desktop
If you turn the computer on, the Desktop screen appears.
The desktop is the working area on the computer. It consists of a large workspace and a taskbar at the bottom as shown
in the figure below.
The screen layout may differ depending on the computer model and the operation system version.
Note
1 Recycle
Bin
2 Shortcut
8 Gadget
Icons
7 Sidebar
3 Start
Menu
4 Start
Button
6 System
Tray with
Clock
5 Taskbar
72
1 Recycle Bin
2 Shortcut Icons
3 Start Menu
4 Start Button
5 Taskbar
6 System Tray with
You can drop useless files and folders here.
7 Sidebar
8 Gadget
This is a vertical bar that appears at the side of the Desktop.
Clock
You can launch programs by clicking the shortcut icons on the Desktop.
The menu from which you can launch programs.
Press the start button. The Start menu appears.
Currently running programs are displayed here.
Shows some running program icons. Icons not being used are hidden. If you click the arrow mark on
the left, you can view hidden icons. This is a mini information program that appears on the Sidebar.
This is a mini information program that appears on the Sidebar.
Some items may not be provided depending on the Windows Vista version.
Note
73
Start Menu
The menu from which you can launch programs.
Click Start (
). The Start menu appears.
Alternatively, press the Windows key (
) on the keyboard.
Fixed Programs
Username
The program or search
result is displayed.
Search
Computer
Control Panel
Help and Support
All Programs
Power Menu Button
You can search for files,
folders, etc.
Lock Button
Power Button
74
Search
Enables users to search for files and folders.
Computer
Shows storage devices such as hard disk drives, CD/DVD drives, network drives, etc.
In addition, you can manage files and folders here.
Control Panel
Enables users to configure the appearance and settings of Windows such as the Desktop,
window colors, hardware and software settings, security, etc.
Help and Support
Provides on-line help about functions and usage of Windows and troubleshooting. You can find
a solution to a problem by entering a keyword.
Power Button
Click the Power button to enter Sleep mode.
However, what the power button does changes according to the power button setting.
Lock Button
To lock the computer, click this button. If you lock your computer, no one can use the computer
until you enter the password.
Power Menu Button
Click the Power Menu button to shut down, restart, and logoff from the computer.
75
p. 87
Sidebar / Gadget
Sidebar is a vertical bar that appears at the side of the Desktop.
A mini program called Gadget runs over the Sidebar which shows information such as stocks, schedule, weather, etc. and
provides frequently used tools.
You can download various Gadgets from the Internet other than the default Gadget.
Sidebar / Gadget Structure
If you launch Windows, the Sidebar is automatically launched and the Sidebar and Gadget appear at the side of the
Desktop.
Gadget
Sidebar
Note
■
If the Sidebar is not launched automatically when Windows starts, click Start > All Programs > Accessories > Windows
Sidebar to launch it manually.
■
To always display the Sidebar, right-click over the Sidebar and select Properties and then select the Sidebar is always on
top of Screen option in the Arrangement field.
76
Adding a Gadget
You can find a gadget in the Gadget Gallery and add it to the Sidebar.
1
2
If you click the + at the top of the Sidebar, the Gadget Gallery opens.
If you double-click on a gadget, the gadget is added to the Sidebar.
Note
■
You can move a gadget to another location by dragging it with the mouse.
Not only can you move a gadget onto the Sidebar but also out of the Sidebar.
■
If you place the mouse pointer over a gadget, the close and option buttons appear.
77
Exiting the Sidebar
Right-click on the Sidebar icon (
Exit to exit the Sidebar.
) in the System Tray with the clock on the taskbar and select
Closing the Sidebar
Note
■
Even if you close the Sidebar, the Sidebar continues running in the System Tray in the clock area, though it is not displayed
on the Desktop.
■
To close the Sidebar, right-click over the Sidebar on the Desktop and select Close Sidebar.
To open the Sidebar again, right-click on the Sidebar icon ( ) in the System Tray with the clock on the taskbar and select
Open.
78
Window
A window is the basic frame for a computer operation. As an example, let’s see the layout of a Pictures Window.
Click Start > Pictures.
The items and names may differ depending on your computer model and the Windows Vista version.
Note
Window Layout
1 Address Display Line
5 Window
2 Move Button
Button
6 Search Box
3 Toolbar
7 Sort Order
8 Folder / File
4 Search Window
9 Detailed Information
Window
79
1 Address Display Line
Shows the location of the currently selected folder or file.
2 Move Button
You can move to the previous or next page by clicking the Back or Next buttons.
Opens the previously opened page.
Opens the next page, when you have returned to a previous page.
3 Toolbar
Provides icons to quickly run frequently used functions.
4 Search Window
You can view the drive structure and the currently opened window location.
You can move directly to a folder by clicking the folder in the Search window.
5 Window Button
Used to resize the window.
Minimizes the window.
Maximizes the window.
Closes the window.
6 Search Box
You can search for files by specifying the text included in the filename or within the file or
file attributes.
7 Sort Order
8 Folder / File
Used to change the sort order of the files.
9 Detailed Information Window
Shows the general information of the selected file.
Note
The drives, folders and files included on the computer are displayed here.
■
What is a drive?
A storage device on which files and folders are saved to and read from.
■
What is a folder?
A folder is used to systematically group and manage files, and may include files in sub-folders.
It is similar to a filing cabinet.
■
What is a file?
A file is a document or various kinds of information generated as a result of a program operation.
This is also called data.
80
Window View Functions
►
Switching between Windows
This function arranges multiple windows in 3D so that
users can easily view the windows.
If you have set up the Aero function, you can use
the window view functions.
Note
If you want to use the Aero function, click
Start > Control Panel > Appearance and
Personalization > Window Color and
Appearance. Select Window Aero from the color
schemes and click OK.
) + Tab keys or click on
Press the Windows logo (
Switch Windows (
) at the bottom left of the Desktop,
and the windows are displayed in 3D.
►
Preview
If you move the mouse pointer over a window button on
the Taskbar, you can preview the contents of the window
without opening it.
81
Control Panel
Tools for configuring Windows are located in the Control Panel.
Opening the Control Panel
Click Start > Control Panel.
System and
Maintenance
Security
Network and
Internet
Hardware and
Sound
Using this function, you can configure Windows performance options.
Using this function, you can check the current security status to protect the computer
and configure the security settings for the firewall, spyware, etc.
Using this function, you can check the network status and configure the settings.
You can change the Internet connection settings.
Using this function, you can add a printer and other hardware, change the settings, and
update the device drivers.
Programs
Using this function, you can remove a program or Windows function and download a
new program from the internet.
Mobile PC
You can set up the mobility, power option and personal settings for your mobile PC. You
can also synchronize your mobile PC with another portable device or network folder.
82
User Accounts and
Family Safety
You can change the user account settings, passwords and configure the Parental
Controls function.
Appearance and
Personalize
Using this function, you can configure the Desktop style, theme or screen saver
settings.
Clock, Language,
and Region
Using this function, you can configure the date, time, language and regional settings.
Ease of Access
Using this function, you can select options for hearing and sight impaired persons as
well as for challenged persons. You can configure the audio recognition settings.
Additional Options
Using this function, you can configure other Control Panel item settings.
83
User Accounts
Using Windows Vista User Accounts, more than one user can easily share the same PC.
The procedures to add and delete a user account and to switch users are described below.
5
Adding User Accounts
1
2
3
4
Click Start > Control Panel> User Accounts and
Family Safety.
Click User Accounts > Manage another account.
Click Create a new account.
Enter a new username and select either Standard
User or Administrator.
84
Click Create a new account to add a new account.
Removing User Accounts
Note
1
2
3
4
5
■
If there is only one administrator account for the
computer, you cannot delete the administrator
account.
■
You can only delete another account when you
are logged in as an administrator.
If you click Delete files, the account and all files
belonging to the account are deleted.
If you click Keep files, only the account is deleted
and the files belonging to the user are saved on the
Desktop.
Click Start > Control Panel > User Accounts and
Family Safety > User Accounts.
Click Manage Another Account.
Switching User Accounts
Click on the user account to be deleted.
1
Click Start (
User.
2
If you click on another username in the start screen,
you can login with that user account.
) on the taskbar and select Switch
Click Delete the Account in the Make changes to
user’s account menu.
A window appears asking whether you want to
save the desktop, documents, favorites, music files,
pictures and video folders as new folders on the
Desktop before deleting the account.
85
Changing the screen resolution and the color
The resolution refers to the number of pixels displayed on the screen. When increasing the resolution, the items on the
Desktop become smaller and more items can be displayed on the screen. The higher the color quality, the more colors
are displayed on the screen.
1
2
Click Start > Control Panel > Appearance and Personalization > Personalization > Display Settings.
Alternatively, right-click on the Desktop and select Personalization > Display Settings from the pop-up menu.
The Display Settings screen appears.
Change the resolution and color settings and click the OK button.
You can check the
graphics chipset.
To change the resolution,
slide the resolution sliding bar
to a particular resolution.
To change the color quality, click
this button and select a particular
quality.
The following resolutions and color qualities are recommended according to the computer LCD panel type.
Note
LCD Type
Resolution
Color Quality
WXGA
1280 x 800
Very High (32bit)
86
3
Configuring the Start Menu Power Button
The Power button on the Start menu (
) performs
various operations depending on the settings.
1
Click on Change Advanced Power Settings and
open Start Menu Power Button in the Power
Buttons and Lid item.
Click Start > Control Panel > Hardware and
Sound > Power Options and then Change Battery
Settings.
1
2
2
Click on Change Plan Settings in the currently
selected power setting.
87
4
Select a power plan and click the OK button.
Type
Power Button
Image after Setting
Change
Description
Sets the computer to enter Sleep mode.
The screen and hard disk will be turned off to reduce the power consumption of
the overall system.
If you press the Power button on the computer, Sleep mode is deactivated and
you can start working immediately.
Sleep
Sets the computer to hibernate.
All work is automatically saved, the screen is turned off and the computer makes
no noise. If you press the Power button of the computer main body, the work
environment is restored and you can start working immediately.
Hibernate
Shut down the computer.
Shut down
Note
You have to shut down the computer after closing all programs and opened
folders.
■
The Power button is set to Sleep mode by default.
■
If the computer is set to download Windows updates automatically, the update mark (
) is displayed on the Power
button when an update is ready.
If you click this button, the update is installed and the computer is shut down when the update installation is complete.
88
Phishing Filter
Phishing is a method used by hackers to illegally collect personal information such as credit card numbers, passwords,
other account numbers, etc. through emails or websites.
The Phishing Filter protects users from these phishing attempts.
If the current page is judged to be a suspicious website, the Phishing Filter displays a warning message with an alarm
when the Phishing Filter is enabled. In addition, if a page that the user is currently trying to open is registered as a known
Phishing website list, it displays a warning page instead.
Phishing Filter Settings
1
2
Launch Internet Explorer.
Select Tools from the menu and click Phishing Filter > Phishing Filter Settings.
89
3
4
The Internet Options window opens.
Locate the Phishing Filter item in the Settings field. Select Turn on automatic website checking and click the OK
button to use the Phishing Filter.
To not use the Phishing Filter, select Turn off automatic website checking in the Settings field in Step 3 above.
90
User control function
Using this function, you can control the content your children can access. You can determine for how long they can use
the computer and the content they can access. When you have finished the settings, click OK to finish.
Configuring Parental Controls
1
Click Start > Control Panel > User Accounts and Family Safety > Parental Controls.
2
Select a user to configure the Parental Controls for.
The User Controls window for that user opens.
3
Click Parental Controls > Use and configure the necessary settings in the Windows Settings at the bottom. If you
click OK, the Parental Controls setting is completed.
91
3
Using Activity Report
You can view and evaluate your children’s internet access
through the Activity Report.
1
2
4
Open the User Controls window referring to the
descriptions of Parental Controls.
Set Activity Reporting to On.
92
To view the Activity Report, click on View Activity
Report on the right of the User Controls window.
If you click the View Activity Report, the following
window opens displaying a computer operating
summary.
Windows Mobile Center
Using Windows Mobile Center, you can easily configure computer settings such as the volume, the wireless network
connection settings, the display settings, etc. all at the same time.
Some functions may not be supported depending on the Windows Vista version.
Note
1
Click Start > All Programs > Accessories > Windows Mobile Center.
Alternatively, click Start > Control Panel > Mobile PC > Windows Mobile Center.
Battery Status Settings
Volume
Control
Display Connection
Settings
Easy Network
Manager
Window
2
Configure the volume, the battery status, the external display, the Sync center, etc. according to your requirements.
Note
■
Configurable items may differ depending on the installed Windows Vista version or programs.
■
If Easy Network Manager program is installed, you can see Easy Network Manager window.
■
If you turn the wireless LAN off in the Mobile Center, this is not reflected by the wireless LAN LED.
93
Chapter 4.
Using the Network
Wired Network
95
Wireless Network
98
ConnectingtoaWirelessLAN
Using the Easy Network Manager
99
100
NetworkSettings
100
UsinginAnotherLocation
10
DiagnosingtheNetworkStatus
10
Connecting with a Modem
104
Bluetooth (Optional)
105
BluetoothFunction
10
UsingBluetooth
10
Wired Network
A wired network is a network environment used for a company network or broadband internet connection at home.
Before You Start!
You can also configure the network settings using the Easy Network Manager.
1
4
Connect a LAN cable to the computer’s LAN port.
2
Click Start > Control Panel > Network and Internet
> Network and Sharing Center.
3
Click Manage Network Connections from the left
panel.
95
p. 100
Right-click over the Local Area Connection and
select Properties.
5
6
Select Internet Protocol Version 4 (TCP/IPv4) from
the Networking tab and click Properties.
Note
■
The LAN device driver may differ depending on
your LAN device model.
■
To add a network component, click Install in the
screen shown in the figure above. You can add
clients, services, and protocols.
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select
Use the following IP address, and set the IP
address manually.
Note
7
96
When not using DHCP, ask your network
administrator for the IP address.
When you have completed the settings, click the OK
button.
The network settings have been completed.
Using both DHCP and a fixed IP
simultaneously
4
Select the Alternate Configuration tab, select User
configured and fill in the corresponding fields.
5
When you have completed the settings, click the OK
button.
Using the Alternate Configuration providing by Windows
Vista, you can set both automatic and fixed IP addresses
and then you can select to use either of them to connect
to the Internet.
1
Click Start > Control Panel > Network and Internet
> Network and Sharing Center and click Manage
Network Connections in the left pane.
2
Right-click over the Local Area Connection and
select Properties.
3
Select Internet Protocol Version 4 (TCP/IPv4) from
the Networking tab and select Properties.
97
Wireless Network
A wireless network (Wireless LAN) environment is a network environment that enables communicating between
multiple computers at home or a small-size office through wireless LAN devices.
Before You Start!
■
The descriptions below are for computer models with a Wireless LAN card or device. You can also configure the wireless network
settings using the Easy Network Manager. p. 100
A Wireless LAN device is optional. To view the installed wireless LAN card, click Start > Control Panel > Hardware and Sound >
Device Manager > Network Adapter and click the + symbol.
The figures in this manual may differ from the actual ones depending on your wireless LAN device model.
■
To use the wireless LAN, you have to turn the wireless LAN on first by pressing the Fn + (
on, the Wireless LAN LED ( ) is lit.
Wireless LAN Connections
■ Wireless Ad-Hoc Network Type
This connects computers with wireless LAN
communications capability.
Communication is enabled by constructing an Ad-Hoc
network via one computer and connecting another
computer through a wireless connection.
Wireless network connections can be classified into 3
categories and this manual describes the connection
procedures for connecting through an AP.
■ Access Point (AP)
You can connect to the Internet or another computer
on the network through an AP.
For more detailed connection procedures, refer to the
descriptions that appear when selecting Start > Help
and Support > Contents > Networking - Computer
and Device Connection > Network Setting > AdHoc Network Setting.
What is an Access Point (AP)?
Note
) keys. If the wireless LAN is turned
An AP is a network device that bridges wired and
wireless LANs, and corresponds to a wireless hub in a
wired network. You can connect multiple wireless LAN
installed computers to an AP.
When you use Ad-Hoc, you have to change the
McAfee Firewall settings. p. 181
98
Connecting to a Wireless LAN
If there is an AP, you can connect to the Internet via the
AP using the Wireless LAN connection method provided
by Windows Vista.
1
2
Note
Right-click over the Network Connections ( ) icon
on the taskbar and click Connect to the Network.
3
Select an AP to connect to and click Connect. If
there is a configured network key for the AP to
connect to, the Enter Network Key window appears.
Enter the network key in the window and then click
the Connect button.
Ask your network administrator for the network key,
if necessary.
When Connected to the AP is displayed, click the
Close button.
You can access the network.
Checking the network connection status
Move the mouse pointer over the Wireless Network
Connection ( ) icon on the taskbar, and the connection
status is displayed.
99
Using the Easy Network Manager
Easy Network Manager is a program that helps configure the network settings.
Easy Network Manager provides the following features.
 You can easily configure the network and printer settings.
p. 100~101
 You can immediately use the network without having to define new network settings again after moving to
another location. p. 102
By configuring the network settings (IP address, printer settings, etc.) for each location, you can immediately access
the network without following the network setting procedures each time regardless of your location.
 You can diagnose the network status.
p. 103
Network Settings
3
This section describes the procedures to connect to
the Internet by setting up a network. The setting up
procedures include procedures to add a printer to the
network.
1
2
4
To use a wired LAN, connect the LAN cable to the
LAN port. To use the wireless LAN, you have to turn
the wireless LAN on first by pressing the Fn +
(
) keys. If the wireless LAN is turned on, the
Wireless LAN LED lights up.
Click Start > All Programs > Samsung > Easy
Network Manager > Easy Network Manager.
100
Click the Add button.
Select a network location icon and enter the name of
the location (e.g. Home). Click the Next button.
5
7
Select Internet Direct Connection and click the
Next button.
Click Add Printer and set up a printer according to
the wizard. When the printer has been added, click
the Refresh button, select the newly added printer
and then click the Finish button.
To not add a printer, click the Finish button.
Note
6
8
Select the LAN device, setup the IP address and
click the Next button.
When the network settings are complete, the ’Do
you want to move to the newly added location
now?’ message appears. Click the No button.
An icon for the added location is created. The
network settings have been completed.
If you select ’Yes’, the network settings for the added
location are applied.
Select Device
IP Settings
Select a device to be connected
to the Internet. Select either Wired
LAN or Wireless LAN.
To use a static IP address, fill in the fields. For the IP
address information, ask your network administrator.
Note
Obtain an IP address automatically
Select DHCP to use this option (automatic IP setting).
101
To add a new location, repeat the procedures from
Step 3 above.
Using in Another Location
If the Internet connection is a wireless LAN, you
have to select an AP as follows.
By configuring the network settings (IP address, printer
setting, etc.) for each location, you can immediately
access the network in one click, without performing the
network setting procedures regardless of your location.
1
2
3

Click on the Network connection ( ) icon
on the Taskbar using the touchpad and select
Connect to the Network.

Select an available AP and click the Connect
button. If a network key is required, ask your
network administrator for the key information.
Click Start > All Programs > Samsung > Easy
Network Manager > Easy Network Manager when
connected to the Internet.
Select an icon that represents the corresponding
location from the Saved Locations window and then
click Move.
If the Internet connection is a wired LAN, you
can immediately load the settings for the new
location and the corresponding network connection
information is displayed in the Current Location
Information window.
102
Diagnosing the Network Status
3
You can diagnose the network state and find solutions for
why you cannot connect to the network.
1
2
Launch Easy Network Manager.
4
Select Management > Diagnose Status from the
menu.
103
The Network Connections window appears.
Click Start to start the network diagnosis.
When the diagnosis is complete, a device with a
problem is marked by an exclamation mark icon with
a description of the problem at the bottom of the
window.
Connecting with a Modem
The procedures to connect to the Internet via a phone connection are described below.
Before You Start!
1
2
■
To connect to the Internet, you have to subscribe to an Internet connection service of an Internet service provider (ISP).
■
A modem port is optional and provided for some models only.
Connect the phone cable to the Modem port.
Take care to not connect a digital phone line to the modem port.
Connect to the Internet according to the instructions of your Internet service provider (ISP).
If the Internet connection is terminated abnormally, the connection is not released and the corresponding cost can be accrued.
Note
104
Bluetooth (Optional)
Bluetooth is wireless communications technology that allows access to nearby devices such as another computer,
a cell phone, printer, keyboard, mouse, etc. without a cable connection. Using Bluetooth, you can exchange files,
connect to the Internet, and construct a private network as well as communicate with a keyboard, mouse, printer, etc.
without a cable connection.
Before You Start!
■
The Bluetooth supporting function is only available between devices (a computer, cell phone, PDA, printer, etc.) and the
connection may be restricted according to the profile of the corresponding device.
■
The Bluetooth function is optional and may not be supported depending on your model.
■
Compatibility to devices without the authentication or logo of Bluetooth is not guaranteed.
Bluetooth Function
File Transmission
Network Access
Network Access
through a Phone
Connection
Data Sync
(Synchronization)
You can exchange files between two Bluetooth devices.
You can exchange files with another Bluetooth device such as another computer, cell
phone, PDA, etc.
You can connect to another Bluetooth-installed computer in the same way as an Ad-Hoc
mode in wireless LAN and connect to the network via an AP or an Internet connection
sharing server.
You can connect to the network via a Bluetooth cell phone.
You can synchronize PIMS data (Outlook E-mail address data) with Bluetooth devices
such as a cell phone, PDA, another notebook computer, etc.
Electronic
Business Card
(Vcard) Exchange
You can exchange business cards with Bluetooth devices such as a cell phone, PDA,
another notebook computer, etc.
Sound Output
You can output computer sound to another Bluetooth device or vice versa.
HID Connections
You can connect and use Bluetooth peripherals such as a keyboard, mouse, joystick, etc.
For more information about using the Bluetooth function, refer to the online help of the Bluetooth Device.
Note
105
Using Bluetooth
2
The procedures to exchange files between computers
supporting Bluetooth and to use other Bluetooth devices
are described below.
If the Bluetooth Device window appears, click Add.
Using Bluetooth Devices (Connecting
Headset supporting Bluetooth)
As an example, the procedures to connect to a headset
supporting Bluetooth will be described below. Searching
for Bluetooth devices corresponds to Steps 1 to 4 and
may be slightly different depending on the device.
1
To connect to another device via Bluetooth, doubleclick the Bluetooth icon ( )on the Taskbar.
3
Note
If the the Bluetooth icon does not appear on the
Taskbar, click Start > Control Panel > Hardware
and Sound > Bluetooth Devices > Options
and select the Show the Bluetooth icon in the
notification area check box. Click OK.
106
If the Add Bluetooth Device Wizard screen appears,
select the My device is set up and ready to be
found and click the Next button.
4
5
When the search is complete, all available Bluetooth
devices are listed. Select the Headset from the list
and click the Next button.
Note
■
A Bluetooth device is represented by the device
type and name (Dedicated Bluetooth ID).
■
To use the Bluetooth headset, Bluetooth Pairing
Mode is required.
For the procedures to set up Pairing Mode, refer
to the Headset Manual.
Enter the PIN in the device PIN field and click the
Next button.
Note
107
For pairing, a PIN is required. Since a PIN is
provided by the headset manufacturer, refer to the
corresponding manual.
6
If the Completing the Add Bluetooth Device Wizard
window appears, click Finish.
7
The stereo headset is connected and you can now
use the Bluetooth headset normally.
Exchanging Files between Bluetooth
Computers
3
Select a computer to send the file to and click the
OK button.
4
Enter a PIN in the Bluetooth PIN Code field and click
the Next button.
The procedures to exchange files between computers
with Bluetooth capability are described below.
1
2
On the computer which is sending a file (hereafter
Computer A), right-click the Bluetooth icon( ) on
the taskbar and select File Transfer.
Click Browse, select a Bluetooth device to send
the file to and click the Next button in the Select
Bluetooth Device window.
Note
5
6
7
108
The Bluetooth PIN Code is a password used for
connecting two Bluetooth devices. The user just
enters the same PIN Code (E.g. same numbers) on
both Bluetooth devices to make the connection.
Click Browse, specify a file to be sent and click Next
button in the Select File to be Sent screen.
When the PIN input window appears on the computer
to receive the file, enter the PIN from Step 5.
When the FTP file access privilege request for the
file reception notification window appears, click the
notification window. If the Select Access Permission
window appears, click the OK button.
Usage Instructions
 Bluetooth devices to be connected must be within a
3m (10 ft.) distance.
 For a better communications environment, there
should be no walls or obstacles between the Bluetooth
devices.
 You can connect to only one Bluetooth device at a
time for a phone connection, data syncing, electronic
business card exchange, FAX transmission/reception,
sound related functions, and serial port functions.
 Using the network connection or file transmission
function, multiple Bluetooth devices can be connected.
However, since connecting to multiple devices may
slow down the data rate or make the connection
unstable, connecting to one device at a time is
recommended.
 The Bluetooth function of a Bluetooth PDA, mobile
phone, mouse or keyboard may be turned off. To
use them in connection with a Samsung computer
supporting Bluetooth, you must check if the Bluetooth
function of the device to connect to is turned on.
For the procedures on turning on the Bluetooth
function of a device, refer to the relevant device
manual.
 The services provided by Bluetooth devices may
vary depending on their capabilities. For the services
provided by the Bluetooth device, refer to the device
manual.
109
Chapter 5.
Using Applications
Introducing Programs
111
CyberLink PowerDVD (Optional)
114
Samsung Update Plus (Optional)
116
Play AVStation (Optional)
118
LaunchingandScreenLayouts
118
MovieStation
119
MusicStation
12
PhotoStation
127
AVStation Now (Optional)
131
Start
11
Exit
131
ScreenLayout
131
Play Camera (Optional)
132
Introducing Programs
UsingthesoftwaresuppliedwiththeSamsungcomputer,youcaneasilyusefunctionsandtroubleshootproblems.
Trytousethesoftwareafterlearningaboutthebasicuseofthesoftware.Fordetailedinformation,refertothehelp
section of the corresponding software.
Before You Start!
Everysoftwareprogrammaynotbeprovideddependingonyourcomputermodel.
Inaddition,thescreencaptureimagesmaydifferfromactualonesdependingonthecomputermodelandsoftwareversion.
111
Multi Media Functions
 CyberLink PowerDVD (
 Easy Network Manager (
Easy Network Manager is a program that enables you
to easily configure the network settings.
You can configure the network settings for each
location and you can also diagnose the network status p. 100
) (Optional)
To use this program, you have to install the program
manually using the additionally supplied System
Software Media (or other CD). p. 114
 Play AVStation (
 Easy Battery Manager (
) (Optional)
) (Optional)
Easy Battery Manager is a power management
program that provides easy-to-use power management
and power saving settings so that the battery usage
time can be extended. p. 146
Play AVStation is an integrated multimedia program
that enables users to enjoy better quality music,
photographs, videos, movies, etc. all with a single
program. p. 118
 Easy Display Manager (Optional)
 Play Camera (Optional)
Using this program, you can directly take pictures and
record video on the computer. p. 132
Easy Display Manager is a program that displays
the changed setting on the screen when a setting is
changed by pressing the shortcut keys, and enables
changing the display mode through the Display
Settings window.
Management Functions
 Samsung Update Plus (
) (Optional)
) (Optional)
Samsung Update Plus is a software function that
examines and updates the Samsung software and
drivers installed on your Samsung computer to the
most recent versions. p. 116
Example) The icon that appears when pressing the
Fn + (
) keys to change the screen
brightness.
 Easy SpeedUP Manager (Optional)
This program enables you to select operation mode
when you need maximum system performance or lownoise/low power consumption with one-click. p. 46
112
Troubleshooting Functions
 SAMSUNG Magic Doctor (
)
SAMSUNG Magic Doctor is troubleshooting software
provided by Samsung Computer for system diagnosis,
and restoring the system.
The system diagnosis function enables users to
diagnose system problems without assistance from
others.
113
CyberLink PowerDVD (Optional)
CyberLink PowerDVD is a DVD player program.
Before You Start!
The CyberLink PowerDVD program is optional and may be not provided for some models.
If it is not installed on your hard disk drive, install it using the System Software media (or additional CD).
1
2
4
Insert a DVD title into the DVD drive.
Then click the Play icon in the control panel of
CyberLink PowerDVD to play the DVD title.
Select PowerDVD and click the OK button.
After a moment, the DVD title will play.
Play
Undock Player
Panel
If you click the Undock Player Panel button, the
program control panel transforms as follows.
Note
3
If the DVD title is not automatically played, click Start
> All Programs > CyberLink DVD Suite > Power
DVD > CyberLink PowerDVD.
114
■
Detailed Usage
For more detailed usage, click Start > All Programs > Cyberlink DVD Suite > Power DVD > PowerDVD Help.
Note
■
DVD Region Code
A DVD title has a region code according to the international specifications so that it can be played only in that specific
region.
DVD titles with a region code will only play on DVD drives and program for playing with the same region code.
A DVD drive is sold with an empty region code and the region code is set when the user inserts a DVD title into the drive for
the first time. Whenever a DVD title is inserted with a region code different from that of the DVD drive, the region code of the
DVD drive is automatically changed to the region code of the DVD title.
However, changing the region code of a DVD drive is limited to 5 changes. After that, the region code is permanently fixed
to the last region code. If you need to change the region code after changing the code 5 times, contact a service center.
Although a service center can help you in this case, you will be charged a service fee.
115
Samsung Update Plus (Optional)
Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your
Samsung computer to the latest version.
Before You Start!
■
To search for updates and update your computer using Samsung Update Plus, your computer must be connected to the Internet.
■
The update search result may differ depending on your computer model.
Samsung Update Plus does not provide updates for applications installed after purchasing the computer.
Note
2
To update the software and drivers
1
Click Start > All Programs > Samsung > Samsung
Update Plus > Samsung Update Plus.
Note
If this is the first time you are running the program,
a window will appear asking you if you agree to the
agreement in the window. Click Agree to use this
software.
116
If you click on Search for new updates, new
updates are searched for.
3
If there are available software or driver updates for
your computer, the available updates will be listed.
Select the required updates from the list and click on
Install Updates to start the update.
Automatic update items display
Note
Updates that must be installed separately.
Caution
If you select Install for an update item that must be
installed separately, a message appears informing
you of this. Follow the instruction message to
correctly install it.
117
By default, your computer is configured to
automatically search for updates. If there is a new
update available, this is displayed in the notification
area. Click the balloon help icon in the notification
area. Here you will be able to find the latest
available updates.
Play AVStation (Optional)
Play AVStation is an integrated multimedia program that enables users to enjoy music, photographs, video, movies,
etc. using a single program.
This section describes the basic usage of Play AVStation.
Before You Start!
■
The screens used in this manual may differ from actual screens according to the program version.
■
For detailed usage, refer to the program help.
■
TV Station is only available for systems supporting the TV function. This computer is not supported.
Launching and Screen Layouts
To launch the program, click Start > All Programs > Samsung > Play AVStation > Play AVStation.
Alternatively, double-click the Play AVStation icon(
)on the Desktop.
Resize Window And
Exit Buttons
Station Bar
Menu
Library
Movie
You can play a video (movie) file.
Music
You can play a music file or an audio CD.
Photo
You can view or edit a photograph (image), and also view the photographs in a SlideShow.
118
Movie Station
Launch Play AVStation and click on Movie on the Station Bar.
Mini Mode View
Movie List and
Thumbnail Window
Movie Library
Play Control
Buttons
Play Highlight Button
EDI Button
(Enhanced Digital Image
Setting)
EDS Button
(Enhanced Digital
Sound Setting)
Note
Volume Control
Capture Button
Create Highlight/Chapter Button
● What is EDI (Enhanced Digital Image)?
EDI (Enhanced Digital Image) is visual quality enhancement technology developed by Samsung Electronics. You can view
clearer and sharper images by enabling the EDI function when watching TV or playing a movie on Play AVStation. To enable
the EDI function, click the EDI (
) button at the bottom of the TV or Movie Station.
Some TV tuner and graphics cards are not supported by EDI.
● What is EDS (Enhanced Digital Sound)?
EDS (Enhanced Digital Sound) is sound quality enhancement technology developed by Samsung Electronics. You can listen
to clearer sound if you enable the EDS function when playing music or movie on Play AVStation.
To enable the EDS function, click the EDS (
) button at the bottom of Music or Movie Station.
119
Playing a Movie File
The procedures to play a movie file registered to the MOVIE Library are described below. For the procedures to register
files to the Library, refer to p. 121.
1
2
Move to Movie Station and double-click All Video in the left menu pane.
Double-click a movie file.
The file is played.
■
Playing a Video File not Registered to the Library
Click Menu > File > Open File, select a movie file to be played and click Open. The selected file is automatically registered
to the Library and played.
Note
■
Playing a Video File in Full Screen
1. Double-click on the current playback screen.
2. The movie is played in full screen.
In full screen, to view the movie at the default size, double-click on the current playback screen again.
■
Capturing the Video Screen
) below the You can view captured images in the Photo Station > Captured
Click on Capture Current Screen (
Images folder. Captured images are saved in the C:\Samsung\Play AVStation\Data\Capture folder. You can change the
captured image folder by selecting Menu > Tools > Options > Capture.
120
Adding Videos to the Library
The Movie Library is a library with movie files to be used
by Movie Station. The procedures to add movie files
saved on the computer to the Library are described below.
You can add files or folders. As an example, the
procedures to add folders are described below.
1
Select Menu > File > Add to Library > Folder.
2
Select a target folder and select Video Files option
in the Target File Type field.
3
The movie files found in the selected folder are
added to the Library.
Note
121
The movie files used in Play AVStation are
automatically added to the Library.
3
Highlight / Chapter Function
Using the Highlight function, you can watch a highlighted
part of a movie such as a sports or news item, etc. Using
the Chapter function, you can create chapters for a movie
and play the movie from any of the chapters.
Note
1
To watch a highlight, double-click a file made and
click the Highlight icon at the bottom right of the
current movie file.
The Highlight/Chapter function works on the basis
of specific standards depending on the target video.
Therefore, the result of the function may differ from
the user’s intention.
Select a movie and click Make Highlight/Chapter at
the bottom of the window.
Chapters
4
2
Select the movie type (Sports, News, Other).
A Highlight / Chapter is created.
122
HighlightON/OFF
The highlight is played. If you click on a Chapter
thumbnail, the corresponding Chapter is played.
Music Station
Launch Play AVStation and click Music on the Station Bar.
Music Type
Music Search
Music Library
Playlist Window
Repeat Setting
Volume Control
Random Play
Setting
Play Control Buttons
EDS
EQ
123
3
Playing an Audio CD
The procedures to play an audio CD are described below.
1
2
The CD is played.
Insert an audio CD into the CD drive.
Note
If the AutoPlay window appears, select Play audio
CD using Samsung PLAY AVStation.
124
If a CD is already inserted in the CD/DVD drive,
select CD in the Audio CD folder of the Library and
double-click the title. The CD is played.
Playing a Music File
If a music file is registered to the Music Library, you can easily play the music file. For the procedures to register tracks to
the Library, refer to p. 126.
1
2
Move to Music Station and double-click on All Music.
Double-click a music file.
The file is added to the playlist and played.
Play a Track not registered to the Library
Note
Click Menu > File > Open File, select a music file to be played and click Open.
The selected track is registered to the Library and played.
125
3
Adding Music Files to the Library
The Music Library is a library with music files used by
Music Station. The procedures to add music files saved
on the computer to the Library are described below.
The music files found in the selected folder are
added to the Library. The music files are registered.
You can add files, folders.
As an example, the procedures to add a folder are
described below.
1
Select Menu > File > Add to Library > Folder.
Note
2
Select a target folder and select the Audio File
option in the Target File Type.
126
The tracks played in Play AVStation are
automatically added to the Library.
Photo Station
Launch Play AVStation and click on Photo on the Station Bar.
Photo Library
Photo List and
Thumbnail Window
View and Edit
Button
Batch Edit Button
SlideShow Button
127
3
Viewing an Image
The procedures to view images registered to the Photo
Library individually and via a SlideShow are described
below.
For the procedures to register image files to the Library,
refer to p. 130.
1
2
■
The selected image file is registered to the
Library and displayed in the Preview window.
■
Viewing images using the SlideShow function
Click the SlideShow button at the bottom of the
Photo Station.
Double-click on an image. The selected image is
displayed in the Preview screen. Press the left and
right arrow keys to navigate through the images.
Slide Show
Left and Right
Arrows
Viewing an image not registered to the Library
Click Menu > File > Open File, select an image
file to view, and click Open.
Note
Move to Photo Station and double-click on All
Images.
Edit Image
Click on To The list Screen to return to the list.
Zoom
Control
128
4
Editing an Image
You can change the shape of an image, edit an image
or apply special effects to an image. The image editing
functions are described below.
1
Move to Photo Station and double-click on All
Images.
2
Click on a folder which includes images, and the
images in the folder are displayed.
3
If the Preview screen appears, click the Edit button
at the bottom left. If the image editor screen appears,
edit the image using the Edit tools at the bottom of
the window.
Click to save the
edited image
Click to switch to the
Preview screen
Double-click on an image or click the View and Edit
button at the bottom right to switch to the Preview
screen.
Image Editor Window
Note
129
Edit Tools
Click on Original View to edit the image comparing it
to the original.
5
You can save an edited image by clicking the Save
or Save As button.
6
Click the Exit Editor button to return to the Preview
screen.
Adding Images to the Library
The Photo Library is a library with image files to be used by Photo Station. The procedures to add image files saved on
the computer to the Library are described below.
You can add files, add folders.
As an example, the procedures to add folders are described below.
1
2
Select Menu > File > Add to Library > Folder.
Select a target folder and select the Image File option in the Target File Type field.
The image files found in the selected folder are added to the Library.
The image files used in AVStation are automatically added to the Library.
Note
130
AVStation Now (Optional)
AVStation Now is a multimedia program that enables you to easily enjoy pictures, music and videos.
Start
If you press the AV( ) button when the computer is on,
AVStation Now will be launched.
If you press the AV( ) button when the computer is off,
the computer boots up and AVStation Now will run.
Exit
Move the mouse pointer to the top of the screen and click
the Exit ( ) button to exit AVStation Now.
Screen Layout
Each menu of AVStation Now is linked to a multimedia
program so that you can use the corresponding function.
Music: Play AVStation is launched and you can play a
music file or audio CD.
Click on a menu to run the corresponding program.
For more detailed usage of each program, refer to the
online help of each program.
■
AVStation Now menus may differ depending on
your computer model and some functions may
not be supported by your computer. In addition,
if a required program is removed or not installed,
the corresponding menu will not appear.
■
TV Station is only available for systems
supporting the TV function.
■
The screens used in this manual may differ from
actual screens according to the program version.
Caution
Movie: Play AVStation is launched and you can play a
movie.
Photo: Play AVStation is launched and you can view
photographs or image files individually or in a SlideShow.
131
Play Camera (Optional)
Play Camera is a program that enables users to take still pictures or record videos using the camera installed on the
computer.
Before You Start!
■
The program versions described in this manual are subject to change and the screen images and terms in this manual may differ
from actual ones.
■
For more information on how to use the program, refer to the online help.
Note
1
■
Do not take pictures or record video of someone without their permission.
■
Do not take pictures or record video in locations where photography is prohibited.
■
Do not take pictures or record video in locations where you could violate another person’s privacy.
Click Start > All Programs > Samsung > Play
Camera > Play Camera.
Preview Window
Note
Window Control
and Exit Buttons
2
Place an object in front of the camera over the LCD
) or Record
and click the Snapshot (
(
) button. A still picture is taken or video starts
recording.
Note
3
Open Folder
Preview
Rec
Help
Snapshot
132
If you right-click over the Preview window using the
Touchpad, you can set up the camera, resolution,
device and save folder.
To stop a video recording, click the Stop (
button. The recording is stopped.
)
If you click the Open Folder (
) button, you can
view your stored pictures and videos.
- You can view a picture by double-clicking it.
- Since you cannot watch recorded videos using the
Play Camera, use a video playing program such as
Windows Media Player, Cyberlink Power DVD, etc.
to watch videos.
Chapter 6.
Settings and Upgrade
LCD Brightness Control
134
BIOS Setup
135
EnteringtheBIOSSetup
13
TheBIOSSetupScreen
137
Setting a Boot Password
139
Changing the Boot Priority
141
Upgrading Memory
142
Battery
144
Installing/RemovingtheBattery
14
ChargingtheBattery
14
MeasuringtheRemainingBatteryCharge
14
ExtendingtheBatteryUsageTime
14
Using the Security Lock Port
149
LCD Brightness Control
You can adjust the LCD brightness in 8 levels.
Before You Start!
The LCD brightness is the brightest (Level 8) when the computer is running on AC power, and it becomes dimmer when running on
battery power.
Controlling the Brightness Using the Keyboard
Adjust the LCD brightness by pressing the Fn + (
) key or the Fn + (
) key.
The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the Fn + (
once.
■
) key
Maintaining the changed LCD brightness even after turning the computer on again
To maintain the LCD brightness set by using the brightness control keys or through the Power Options, follow the
procedures below.
Note
1. Turn the computer on and press the F2 key when the SAMSUNG logo appears on the screen to enter the BIOS Setup.
2. Select the Boot menu and set the Brightness Mode Control item to User Control.
3. Press the F10 key to save the settings and exit Setup.
■
Saving battery power consumption
Decrease the LCD brightness when the computer is running on battery power or select Samsung Optimized in Easy
Battery Manager to save battery power consumption.
Easy Battery Manager is optional and may not be surpported depending on your model.
■
Defective LCD Pixels
An LCD panel may include less than 4 defective pixels due to a limit in the manufacturing process and this does not affect
the computer performance. The computer’s LCD panel may have the same or similar number of defective pixels as other
manufacturer’s notebook computers.
Instructions for Cleaning the LCD
Caution
Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the LCD.
134
BIOS Setup
The BIOS Setup enables you to configure your computer hardware according to your needs.
Before You Start!
■
Use the BIOS setup to define a boot password, change the booting priority, or add a new device.
Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS.
■
The functions of the BIOS setup are subject to change for product function enhancement purposes.
The BIOS Setup menus and items may differ depending on your computer model.
Note
Entering the BIOS Setup
1
2
Turn the computer on.
When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS Setup.
135
3
After a moment, the BIOS setup screen appears.
The items in the BIOS setup may differ depending on the product.
Setup Menu
Help
Help for the selected item
appears automatically.
Setup Items
136
The BIOS Setup Screen
Menu
Description
Main
Used to change the basic system and environment settings.
Advanced
Used to configure advanced functions on your computer around devices and chipsets.
Security
Used to configure security functions, including passwords.
Boot
Used to set the boot priority and other boot options
Exit
Used to exit the Setup either saving the changes or not.
137
System Setup Keys
In the Setup, you have to use the keyboard.
F1
Press to view the Setup Help.
Up & Down Keys
Press to move up and down.
F5/F6
Press to change the item value.
F9
Press to load the default Setup settings.
ESC
Press to return to a higher level menu or to move to the Exit menu.
Left & Right Keys
Press to move to another menu.
Enter
Press to select an item or to enter a sub menu.
F10
Press to save the changes and exit Setup.
138
Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the BIOS Setup.
By configuring a password, you can restrict system access to authorized users only and protect data and files saved
on the computer.
Before You Start!
Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.
3
Setting a Supervisor Password
A Supervisor Password is required to turn the computer
on or to start the System Setup.
When setting a Supervisor Password, users other than a
supervisor cannot use the computer.
1
2
Enter a password, press <Enter>, re-enter the
password for confirmation, and press <Enter> again.
The password can be up to 8 alphanumeric
characters. Special characters are not allowed.
Select the Security menu in the BIOS Setup.
In the Set Supervisor Password item, press
<Enter>.
4
139
When a message confirming the password
configuration appears in the [Setup Notice] window,
press <Enter>.
The supervisor password has been set.
The supervisor password is required to turn the
computer on or to enter the BIOS Setup.
Setting a User Password
Setting Up a Boot Password
Users can start the system with a user password, but
cannot enter the System Setup. By doing this, you can
prevent other users from entering Setup.
To setup a boot password, the administrator password
(Set Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled. Once a boot
password is set, you have to enter a password to boot up
the computer.
Before configuring a user password, a supervisor
password must have been configured. Deactivating the
supervisor password also deactivates the user password.
In the Set User Password item, press <Enter> and
complete the procedures from Step 3 of Setting a
Supervisor Password.
Deactivating the Password
1
Setting up a Hard Disk Drive Password
(Optional)
A supervisor password must be set using the Set
Supervisor Password menu.
If you set a password for a hard disk drive, it cannot be
accessed from another computer.
Press Enter in the Set HDD 0 Password item and define
a password as described in Step 3 of the Setting up the
Supervisor Password.
Caution
The hard disk drive password setting function is
not provided for some models.
Press <Enter> on the password to be deactivated.
For example, to deactivate a supervisor password in
the Set Supervisor Password item, press <Enter>.
2
In the Enter Current Password item, enter the
currently configured password and press <Enter>.
3
Leave the Enter New Password item field empty,
and press <Enter>.
4
Leave the Confirm New Password field empty, and
press <Enter>.
5
In the [Setup Notice] window, press <Enter>.
The password is deactivated.
Changing the hard disk drive password
Caution
For security purposes, you can only change a hard
disk drive password after restarting the computer
by pressing the computer Power button.
If you cannot change the hard disk drive password
or the HDD Password Frozen message appears
when entering the BIOS Setup and then selecting
Security > HDD 0 Password, press the Power
button to turn the computer on again.
140
Changing the Boot Priority
The default boot priority of your computer is the CD-ROM first, then a removable device and then the hard disk drive
in this order.
By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures to
change the highest boot priority device to the hard disk drive are described below.
1
2
3
Select the Boot menu in the BIOS Setup.
Press the down key (↓) to move to the IDE HDD
itemand press the F6 key to move up to the top item.
Boot Device Priority
Press <Enter> on the Boot Device Priority item.
Boot priority order:
▼ IDE CD : xxxxxxxxxxxxxxxxxxx
▼ IDE HDD : SAMSUNG xxxxxxx
▼ USB KEY : Not Installed
▼ USB CDROM : Not Installed
▼ USB FDC : Not Installed
▼ USB HDD : Not Installed
▼ PCI BEV : Not Installed
▼
Boot Device Priority
NumLock
Enable Keypad
Summary screen
Boor-time Diagnostic Screen
PXE OPROM
[Off]
[By NumLock]
[Disabled]
[Disabled]
[Only with F12]
Brightness Mode Control
Wireless Device Control
[Auto]
[Always On]
Select system boot
options
Excluded from boot order:
▼ USB ZIP : Not Installed
▼ USB LS120 : Not Installed
Smart Battery Calibration
4
141
Press the F10 key to save the settings and exit
Setup. The highest boot priority device is now set to
the Hard Drive.
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots. One is inside the main board and the other is at the bottom of the computer.
You can only add or replace memory to and from the memory slot at the bottom of the computer.
Before You Start!
■
■
Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.
Disconnect mains power and remove the battery before continuing.
■
To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same
manufacturer) is recommended.
■
Only use the same type of memory as specified in the Product Specification
2
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
Fixing Screw
142
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
3
4
Push the memory module down so that it is
completely fixed. If the memory does not fit easily,
push the memory module down while pulling the
memory module latches outward.
Close the memory compartment cover and fasten
the screw.
Removing a memory module
Note
Pull the memory module latches outward. The
memory module will pop up.
Remove the memory module out at an angle of 30
degrees.
143
Battery
Please refer to the following instructions when running the computer on battery power without connecting the AC
power. A Lithium-Ion smart battery is supplied with this computer.
Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
Use only chargers specified in the User Manual.
Caution
Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.
Never cause a short circuit between the battery pack terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the
battery.
Please refer to the system operation environment ( p. 188) of this manual and operate and store the battery at room
temperature.
Installing/Removing the Battery
1
Shutdown the system, close the LCD panel and
place the computer upside down on a flat surface.
2
Pull the two battery latches outwards (
remove the battery.
3
To install the battery again, slide the battery into the
system.
The battery latches move inwards and fix the battery
automatically.
), then
Check if the battery latch has been moved inwards.
Note
144
To view on the battery
Charging the Battery
1
2
Separate the battery and press the PUSH button inside
the battery. The remaining battery charge (%) will be
displayed.
Attach the battery and connect the AC adapter to the
DC-in jack of the computer.
The battery will then start charging.
When charging is complete, the Charge LED turns
green.
Status
Charge LED
Charging
Amber
Charging complete
Green
AC adapter not connected
Off
Battery Warning
■
You will hear an alarm when the remaining
battery charge reaches below 10%.
In this case, connect the AC adapter or turn off
the computer and install a fully charged battery.
■
If the battery residual amount is 3~5%, the
computer automatically shuts down after saving
the data. The battery residual amount may vary
depending on the computer model.
Note
Measuring the Remaining Battery Charge
Battery Usage Time Information
You can view the battery charge status by completing the
following procedures.
A battery is an expendable supply, so when using it over
a long time, the capacity/battery life is shortened. If the
battery life is reduced to under half of its initial time, we
recommend purchasing a new battery.
To use the shortcut key to view
For long periods of not using the battery, keep the battery
after discharging it. This extends the battery life time.
Press the Fn + (
) keys on the keyboard. The
remaining battery charge (%) will displayed for a moment.
You can only view the charge status in this way when
Easy Display Manager is installed on your computer.
145
Extending the Battery Usage Time
Decreasing the LCD Brightness
Press the Fn + (
) keys on the keyboard to decrease the LCD brightness to extend the battery usage time.
Using Easy Battery Manager (Optional)
Easy Battery Manager is a power management program that enables using the battery power efficiently. You can select
an optimized power mode according to your requirements.
Easy Battery Manager is optional and may not be surpported depending on your model.
Note
1
2
Click Start > Control Panel > Hardware and Sound > Power Options.
Alternatively, right-click the power measuring device icon ( ) in the notification area of the taskbar and select Power
Options.
If the following screen appears, select one of the modes.
Samsung Optimized
Multimedia
146
Samsung Optimized
This mode is appropriate for normal conditions. It maximizes the system performance when the computer is running on
AC power while maximizing the battery usage time when the computer is running on battery power.
Multimedia
This mode is appropriate for a multimedia environment that requires maximum system performance. Therefore, the
battery usage time may be reduced in this mode.
Using the Easy Battery Manager power options
Note
To use the Easy Battery Manager power options after reinstalling Windows, you have to install the Easy Battery Manager
manually using the system software media.
Since power options in Easy Battery Manager aim at maximizing the battery usage time, programs requiring high performance
may slow down when using the battery.
In this case, it is recommended connecting the AC adapter or selecting Power Saver.
147
4
Using the Battery Calibration Function
When charging/discharging the battery repeatedly for a
short time only, the battery usage time may be reduced by
the difference between the actual battery charge and the
remaining charge display.
In this case, the actual battery charge and the remaining
charge display will be the same by discharging the battery
completely using the Battery Calibration function, and
then recharging it again.
1
2
3
Disconnect the AC power adapter after turning off
the computer.
Restart your computer and press the F2 button when
the Samsung logo appears, to start the BIOS Setup.
Move to the Boot > Smart Battery Calibration item
using the direction keys and press <Enter>.
148
Highlight Yes in the Battery Calibration
Confirmation window and press <Enter>.
The Battery Calibration function is activated and
the battery is forcefully discharged. To stop the
operation, press the (Esc) button.
This operation requires 3~5 hours depending on the
battery capacity and the remaining battery charge.
Using the Security Lock Port
You can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to
use the computer in a public place.
To use this feature, you have to purchase the Kensington lock additionally. To use the Kensington lock, refer to the
product manual.
Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port.
149
Chapter 7.
Windows Media Center
About Package Contents and the Program Guide 151
Connecting and Setting Up Media Center
OptionalDevices
Using Media Center
152
15
156
StartScreenLayout
15
Pictures+Videos
157
Music
161
TV+Movies
16
Windows Media Center is provided for some versions of Windows Vista only.
Therefore, this chapter is for models with Windows Media Center only.
About Package Contents and the Program Guide
About the Package Contents
The package contents of your Samsung computer may differ depending on the computer model.
The Media Center remote control, external-type remote control sensor and TV tuner card are not supplied with your
computer and the devices are not required to use Media Center.
However, if you purchase and connect the devices, you can more easily use the various Media Center features.
About the Program Guide
An electronic TV program guide, the Electronic Program Guide (EPG) is provided by the EPG provider and the contents
of the EPG may differ from the actual TV program depending on programming changes by the EPG provider or broadcast
station.
Note
■
You can use the Media Center TV function only when there is an installed TV tuner card.
■
The contents of this manual are subject to change for product improvement purposes.
151
Connecting and Setting Up Media Center
The basic usage of Media Center for Microsoft Windows Vista Home Premium is described below.
Before You Start!
■
This manual will describe procedures assuming that you are using Media Center with a mouse.
■
Since Media Center supports the use of a mouse, keyboard and remote control, in this manual, [Select] means clicking with the
mouse or pressing the corresponding button on the remote control.
Optional Devices
The remote control, external-type remote control sensor and TV tuner card are not essential for using Media Center.
Since these devices are not supplied with your Samsung notebook computer, you have to purchase them additionally if
necessary.
Remote Control
Using the Media Center remote control, you can use Media Center more conveniently over a short distance.
External-Type Remote Control Sensor
To use Media Center using a remote control, you have to install the remote control sensor on the computer.
When purchasing a remote control, purchase an external-type remote control sensor at the same time.
■ Connect the external-type remote control sensor to the USB port of the computer and turn the sensor so that it faces
the remote control.
152
TV Tuner Card
►
Connecting the TV antenna
Using a TV tuner card, you can watch and record TV
programs.
To use the Media Center TV function, you have to connect
the TV antenna to the TV tuner card.
Some models have built-in TV tuner cards. This manual
describes their usage assuming your computer has a
built-in TV tuner card.
If your computer has a built-in TV tuner card, connect the
TV antenna cable to the TV Antenna Input port.
Caution
There are two types of TV tuner cards, built-in
and external types, and they may not support a
recording function depending on the model.
Note
Connecting Devices
►
Connecting an external-type remote
control sensor
Connect the external-type remote control sensor to the
USB port of the computer.
►
Connecting to the Internet
To view the TV Guide or to move to Media Center sites in
Media Center, you have to connect to the Internet.
Connect the network (LAN) cable to the LAN port of the
computer.
Caution
If the computer is not connected to the Internet, you
cannot use the TV Guide (Channel Information) and
the Online Spotlight functions.
153
If you do not have an installed TV tuner card, you
cannot use the TV function.
3
Media Center Setup
Connect all necessary devices and setup Media Center.
You have to complete the settings to use Media Center.
1
2
If the following start screen appears, select the
installation option.
Express Setup enables you to use the basic
functions of Media Center when clicking OK.
However, you cannot use TV and Internet related
functions using Express Setup.
Turn the computer on.
Custom Setup allows you to configure all settings
including TV and Internet settings. If you click OK,
the Setup Wizard starts.
Click Start > Windows Media Center or Start > All
Programs > Windows Media Center.
Note
154
To setup the TV or Internet after an Express Setup,
select Tasks > Settings > General > Windows Media
Center Setup in the Media Center start screen and
setup the following items.
4
If you have selected Custom Setup, continue with
the setup according to the Setup Wizard instructions.
Changing the Media Center settings
If there are no installed TV tuner cards, the TV
related setup steps will appear during the Media
Center setup.
Note
In addition, if the computer is not connected to the
Internet, you cannot setup and use the TV Guide
(Channel Information).
5
When the Media Center setup is complete, click
Finish.
Now you can use the Media Center.
155
You can change the settings by selecting Tasks
> Settings in the Media Center start screen after
completing the Configuration Wizard.
Using Media Center
The descriptions of the Media Center start screen and basic functions will be given below.
Start Screen Layout
Before You Start!
If you selected Run Setup Later in the Media Center start screen or did not complete the Setup Wizard, the Setup Wizard screen
appears when launching Media Center.
If you complete the setup, the Media Center start screen appears.
Click Start > Windows Media Center or Start > All Programs > Windows Media Center.
Move to the Media Center Start Screen
Exit Media
Center
Move to the
Previous Screen
Resize
Move to the Next
Menu Item
Play Control
Buttons
156
Pictures + Videos: You can view pictures, images and
video files.
Pictures + Videos
Music: You can listen to music files, audio CDs and the
radio.
In Pictures + Videos, you can view pictures and videos
registered to the Media Center library.
TV + Movies : You can watch and record TV programs
and play DVD titles.
In addition, you can also view files not registered to the
library by registering them, as well as viewing files on a
removable disk.
Online Media: You can access all kinds of multimedia
content over the .
Registering to the Library
Tasks: You can change the Media Center settings.
The procedures to register files to the library are
described below.
Navigation Arrow: If you move the mouse pointer over
the arrow, you can navigate through the menu in the up,
down, left and right directions.
Note
1
Launch Media Center, and select Pictures + Videos
> Picture Library or Video Library.
The Menu and Play Control buttons appear for a
moment only when moving the mouse pointer. The
Media Player window size decreases if you perform
another task after playing a media file.
Note
2
157
When you run it for the first time, an Add window
may appear. In this case, you can add files
according to the instructions on the screen.
In the library menu, right-click and select Library
Setup.
3
If the Library Setup screen appears, select Add
Folder to Watch.
4
Specify the path for the folder according to the
instructions on the screen.
5
Viewing Pictures and Images
The procedures to view pictures and images registered to
the library are described below.
Note
If the following screen appears, click Finish. You can
view the newly added folder in the Picture Library or
Video Library.
1
2
Launch Media Center, and select Pictures + Videos.
Select Picture Library.
Note
3
158
Picture and image files are saved in the Computer
> Local Disk (C:) > Users > User Accounts >
Picture Folder or Computer > Local Disk (C:) >
Users > Public > Public Pictures folder.
When you run it for the first time, the Setup Library
window may appear. In this case, click the No
button.
Select a folder with picture files.
4
5
Viewing Videos
If you select a picture, the picture is displayed in full
screen.
The procedures to view videos registered to the library are
described below.
You can view another picture by using the Play
Control buttons or the direction buttons on the
keyboard.
Note
To view pictures in a SlideShow, click on Play
SlideShow.
1
2
Alternatively, select Pictures + Videos > Play
All. Then the pictures in the registered folder are
displayed in a random order.
Launch Media Center, and select Pictures + Videos.
Select Video Library.
Note
3
159
Video files are saved in the Computer > Local Disk
(C:) > Users > User Accounts > Video Folder or
Computer > Local Disk (C:) > Users > Public >
Public Video folder.
When you run it for the first time, the Setup Library
window may appear. In this case, click the No
button.
Select a folder with video files.
If you select a video file, the video file is played.
3
Viewing Pictures and Videos Saved on
Removable Media
After a while, a window notifying you that new media
has been found appears. Select View Pictures or
View Videos.
The procedures to view pictures, images and videos
saved on removable media in Media Center are described
below.
1
2
Launch Media Center.
Insert a removable media with picture, image or
video files.
Removable media refers to a CD, DVD, USB flash
memory, memory card, etc.
Note
4
To view pictures saved on a digital camera, connect
the digital camera and the computer using a USB
cable.
5
160
If the file list appears, select a file.
View the picture or video.
Music
3
In Music of Media Center, you can play music files or
audio CDs. In addition, you can rip the tracks of an audio
CD onto the computer and play them later individually or
by using a playlist.
Select Copy CD at the bottom left of the Music
Player window.
Playing an Audio CD
1
2
Launch Media Center.
Press the Eject button of the CD-ROM drive to open
the CD tray and insert an audio CD. The tracks on
the CD are played automatically.
Ripping an Audio CD
1
2
Note
Launch Media Center.
Insert an audio CD into the CD-ROM drive and play
the CD.
161
When running the Rip CD function for the first time,
the Ripping Options appear. Configure the ripping
options according to the instructions on the screen,
and complete the following procedures. From the
second time the program is run, the setup options
are omitted.
4
5
2
If the Rip CD window appears, click Yes.
Ripping a CD begins by showing rotating CD icon
on the right side that indicates ripping a CD is in
progress. When ripping is complete, the ripping CD
complete message appears.
Note
The ripped tracks are displayed in the Music >
Music Library of Media Center and in the Library of
Windows Media Player. The ripped tracks are copied
to Start > Music of the Desktop as album files.
To change the folder to save the ripped tracks to,
launch Windows Media Player and right-click over
the top taskbar and select More Options > Rip
Music > Rip music to this location from the popup menu.
Ripped music albums
3
Playing Ripped Tracks
1
If you select Music Library, the album list appears
including the ripped album.
4
Launch Media Center, and select Music.
162
Select an album to be played and click Play Album
in the left pane.
The album is played.
4
Using Playlists
You can easily create, manage and play a playlist with
ripped music albums and music files downloaded from the
Internet.
1
2
3
The + mark starts blinking at the bottom left of the
Media Player window and disappears the selected
music files are added to the queue.
Launch Media Center, and select Music > Music
Library.
You can search for a music file by selecting the
album, artist, genre or song at the top.
If you select Playlist > All Music, all registered
music files are listed.
Select the music files to be added to the playlist and
click Add to Queue in the left pane.
Media Player Window
5
163
Select the Media Player window at the bottom left
and click View Queue.
6
Select Save As Playlist, enter a playlist name and
select Save. If you have a remote control, you can
enter a name using the numeric buttons on the
remote control.
■
If a music file appears in the Media Center
even after the file has been deleted
If you deleted a music file, you must also
manually delete the file from the Media Center
playlist.
Note
■
Deleting a playlist from Media Center
Select Media Center > Music Library > Playlist,
select a saved playlist and click Delete. Then the
selected playlist is deleted.
7
To play the saved playlist, select Media Center >
Music Library > Playlist, select a playlist and click
Play.
164
TV + Movies
Play DVD: The DVD title
appears.
Before You Start!
The TV function is only available when a TV tuner card is
installed on your computer.
TV + Movies Menus
Search: You can search for a program by the title,
keyword or genre.
Live TV: You can watch live TV
programs.
What is a TV Program Guide - EPG?
Recorded TV: You can watch
recorded TV programs.
Note
Guide (TV Broadcast Program Guide - EPG)
You can view the TV program guide. You can watch or
record live TV programs and reserve a recording.
165
An Electronic Program Guide (EPG) is a TV program
guide. You can select a program and view detailed
information on that program or easily reserve a
recording. The guide information is updated by
Media Center more than once a day.
3
Playing a DVD
The procedures to watch a DVD title are described below.
1
2
After a moment, the DVD menu is displayed.
It the DVD menu is not automatically displayed,
select Play DVD in the start screen.
Launch Media Center.
Press the Eject button of the DVD drive to open the
tray and insert a DVD title.
If you insert a DVD title without starting Media
Center, the Auto Play selection window appears.
Note
Select Play DVD Video using Media Center and
click OK.
4
166
Select Watch Movie or Play from the DVD menu.
The DVD title is played.
If you move the mouse, the Play Control buttons
appear. Using the Play Control buttons, you can play
the DVD from a particular point or stop playing the
DVD.
Online Media
You can access more online content through Online
Media.
Online Media is a service provided by content providers
via the Media Center. You can enjoy all kinds of
multimedia content such as movies, news, sports, etc.
over the Internet.
Note
■
To use Online Media, your computer must be
connected to the Internet.
■
For problems encountered while using Online
Media, contact the corresponding online service
provider. Online Media content services are not
the responsibility of the computer manufacturer.
167
Chapter 8.
Appendix
Using McAfee SecurityCenter (Optional)
169
Using Samsung Magic Doctor (Optional)
170
Reinstalling Software
172
Q&A
174
DisplayRelated
17
ModemRelated
17
WiredNetwork(LAN)Related
177
WirelessNetwork(WLAN)Related
178
GameandProgramRelated
18
Bluetooth
18
HDDVD(Optional)
18
Blu-Ray(Optional)
18
Other
187
Product Specifications
188
Glossary
192
Index
196
Contact SAMSUNG WORLD WIDE
197
Using McAfee SecurityCenter (Optional)
A computer virus is a program that damages computer files and information saved on a computer. A computer
is infected by an already infected file or by another computer over the Internet. Let’s learn how to use McAfee
SecurityCenter in order to scan and remove viruses and to protect your computer from various threats on the
Internet.
Before You Start!
■ When McAfee SecurityCenter is run for the first time, the Registration screen appears. Register according to the instructions on the
screen. You have to register the software to protect the PC with the latest security information.
■ If you cannot find McAfee Security Center icon on the Taskbar or a shortcut icon on the Desktop, then double click McAfee Web
Essentials icon and install the program.
■ If you install McAfee SecurityCenter and another anti-virus program (e.g. Norton Internet Security, Kaspersky, etc) on the same
computer, your computer performance may become degraded and your computer may not be protected from threats due to a
conflict between the programs. It is highly recommended installing only one security program.
Scanning and Curing Viruses
1
2
Click Start > All Programs > McAfee > McAfee
SecurityCenter.
Click Scan from the left pane of the program.
3
If a virus is found, remove the virus according to the
instructions on the screen.
4
If a virus is found, remove the virus according to the
instructions of the Restoration Wizard.
To protect yourself against the latest viruses, update
McAfee SecurityCenter regularly.
Note
169
Connect to the Internet and click the Update icon
(
) to update.
Using Samsung Magic Doctor (Optional)
Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via
one-click or by selecting diagnostic items.
Before You Start!
The screens used in this manual may differ from actual screens according to the program version.
3
Diagnosing the System
Diagnosing the System is a function to check system
connections and diagnose problems affecting to system
operation and solve it.
1
Click Start > All Programs > Samsung > Samsung
Magic Doctor > Samsung Magic Doctor.
2
Click on Diagnose the System to start diagnosing
the system.
170
When the system diagnosis is completed, the
diagnostic result appears. If problems are found,
click the Cure button to correct the problem.
Samsung Magic Doctor starts the corrective
operations.
Viewing My Computer Information
You can view detailed information about your computer in Samsung Magic Doctor.
Click on the icon in the shape of a monitor at the bottom of the main program screen to view detailed information about
the computer.
171
Reinstalling Software
You can reinstall software using the System Software Media, when a device driver or computer application is not
working properly.
Before You Start!
When software is not working properly, it is recommended removing the software using the Add or Remove
Programs of the Control Panel and reinstalling the software using the System Software Media.
The System Software Media is supplied as a CD or DVD depending on your computer model.
Running the System Software Media
The System Diagnosis function enables users to diagnose
the system connectivity, any system problems and resolve
these problems.
1
2
Insert the System Software Media into the CD
drive. If the Auto Play window appears, select Run
SoftwareMedia..... in the Install or Run Program
field.
In the User Account Control window, click Allow.
Caution
If you are not logged in with an administrator
account, you have to enter an administrator
password in the User Account Control window.
172
3
The System Software Media will launch.
Select an instillation option to start the installation.

Standard Installation

Minimum Installation
If you select this option, programs not currently installed on the computer are listed.
If you select this option, programs are listed that need to be installed on the computer (drivers,
Windows updates, etc.).
You can conveniently use this option, when you need to install essential programs only.

Custom Installation
If you select this option, you can select the programs to be installed.
You can conveniently use this option, when you need to install an individual driver or
program that is causing a problem.
2
Installing Software
Note
1
As an example, the installation procedures for the
Standard Installation options are described below.
3
Select Standard Installation in the System
Software Media main screen.
173
If the Start Standard Installation window appears,
click the Yes button.
The drivers and programs, which were installed in
the computer when you purchased the computer, are
installed again.
The Software installations was completed window
appears.
If you click Yes, the computer is restarted.
Q&A
This section provides information on possible problems, solutions and other references for using the system.
Display Related
Q
Q
The LCD screen is too dark or too bright.
When I connect a projector, and change the
settings to display the screen image on both the
LCD and the projector by pressing the Fn+
(
), the screen is not displayed properly.
A Turn the LCD backlight on or adjust the LCD
brightness.
Press Fn + (
) to turn the LCD backlight on or
press Fn + (
) or Fn + (
A Press the Fn + (
) keys again.
If the problem continues even after pressing the key
combination, this is because the current resolution is
too high and is not supported by the projector. In this
case, change the resolution to 1024x768 pixels.
) to adjust the LCD
brightness.
Q
The screensaver is activated while Media Player
is playing a movie or video clip.
Q
When I connect a projector, the taskbar at the
bottom of the screen is not displayed on the
projector.
A Unselect Library > More Options > Player > Allow
screen saver during playback in the Media Player.
A This occurs because a WXGA LCD supports a
resolution of 1280×800 pixels but the resolution is
not supported by the projector. In this case, change
the resolution to 1024x768 pixels (recommended).
Q
In the following cases, the screen blinks or there
is noise for a short time.
► Click the Graphics Related tab, Change
Resolution, Change Display Device, Remove the
AC Adapter, Restart the System, Change Power
Scheme.
A This may happen while the video driver is examining
the connected device. While the detection process
is busy, any connected display devices may blink or
some noise may occur.
174
Modem Related
Q
Q
The shortcut icons are not displayed on the
screen even if I press the shortcut key.
I cannot hear the modem
A The shortcut icons only appear when the Easy
Display Manager program is installed.
A1 Check if the phone line is properly connected to the
modem.
A2 Check if the modem driver is properly installed.
Q
 Click Start > Control Panel > System and
I have connected a monitor (or projector) to
the computer, but the colors on the monitor are
abnormally displayed.
Maintenance > Device Manager > Modem
and then check if the model is not marked with
a yellow exclamation mark. If it is marked with
an exclamation mark, it means that the modem
driver is not properly installed. In this case,
remove the installed driver and install the driver
again.
A Check if the monitor and computer are properly
connected with the signal cable and reconnect the
cable if necessary.
 If the modem is not marked with a yellow
exclamation mark, double-click the installed
modem and select Diagnosis tab > Query
modem to diagnose the modem. If there is no
reaction to the command, it means the modem
is out or order.
In this case, restart the system or reinstall the
modem driver and then diagnose the modem
again.
(Close all applications using the modem before
diagnosing the modem.)
175
Q
When you are unable to make a call when using a
switchboard
A In general, the dial tone of a switchboard or a digital
phone switching system is not continuous unlike that
of a PSTN line. Therefore, the modem may not make
a phone call as it misreads the dial tone as a busy
tone. In this case, perform the following.
Q
When using the modem overseas
A1 Check if the country setting of the modem is set to
the current country.
Since each country has slightly different
telecommunication values, if the location is not set
to the corresponding country, the modem may fail to
make a phone call.
Use the AT Command
Add the ATX3 command for initialization.
Alternatively, enter the ATX3 command first before
make a phone call.
The modem will not check the dial tone before
making a phone call.
 Click Start > Control Panel > Hardware and
Sound.
 Click on Phone and Modem Options.
 In the Dialing Rules tab, click Edit.
 In the General tab of the Edit Location window,
set the Country/Region to your current country,
enter the region code and then click the OK
button.
Configuring the Model in the Control Panel
 Click Start > Control Panel > Hardware and
Sound.
 Click on Phone and Modem Options.
 In the Modem tab, select an installed modem
A2 Since the shape of the phone line connector may
differ depending on the country you are in, you may
have to buy a phone line connector to make a phone
call from that country.
and click Properties.
 In the Modem tab of the Modem Properties
window, unselect the Make a phone call after
waiting for a dial tone option.
 When the settings are complete, click the OK
button.
If you cannot make a phone call starting with
a 0, such as 01432, 01421, 01433, etc., this is
because the private switching system is set to block
long distance calls. Ask your switching system
administrator.
176
Q
How can I receive a FAX in Sleep mode (Standby
Mode)?
Wired Network (LAN) Related
Q
The <Wake On LAN> function
A To receive a FAX when the computer is in Sleep
Mode (Standby Mode), the computer must be
configured as follows.
The FAX program must be configured so that it
receives FAXES automatically referring to the FAX
program manual.
A1 <Wake On LAN> is a function that activates the
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network (wired LAN).
 Click Start > Control Panel > Hardware and
Sound.
Using the <Wake On LAN> Function
 Click on Phone and Modem Options.
 In the Modem tab, select an installed modem
 Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
and click Properties.

In the Power Management tab of the Modem
 Right-click on the Local Area Connection and
Properties window, select the Wake up the
computer with this device option and click the
OK button.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
select Properties.
 Click Configure > Power Management
tab. Select Allow this device to bring the
computer out of standby, then click OK.
Restart the system.
If the system is activated from Sleep mode when
there is no received signal, use the system after
disabling the <Wake On LAN> function.
—
When the modem is configured as above, and a FAX
arrives, the computer wakes up from Sleep Mode
and receives the FAX.
When turning the power off when <Wake On
LAN> is disabled, the LAN LED may continue to
be lit.
—
Connecting a wired LAN while using a wireless
LAN may not activate the <Wake On LAN>
function. Set the Wireless LAN to Disable to use
the <Wake On LAN> function.
—
177
Wireless Network (WLAN) Related
Q
I cannot find an AP.
 Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
 Right-click on the Wireless Network Connections
and select Disable.
A Verify whether the Wireless LAN LED is on.
If it is turned off, turn it on by pressing the Wireless
LAN On/Off button (Fn +
).
Q
The Wireless LAN device is operating properly,
but I cannot connect to the Internet or to another
computer.
► This is due to an incorrect configuration, or a
configuration error. Check the following:
A1 When connecting to a wireless Ad-Hoc network,
check if the network name (SSID) is the same.
A2 If a network key (encryption key) is used, the AP
(Access Point) and wireless Ad-Hoc network keys
must be the same. The AP network key can be
configured using an AP management program.
For more detailed information, ask your network
administrator or product provider.
A3 Check that the device driver is installed properly.
If the driver is not properly installed, you will find
a yellow exclamation mark on the network icon
by clicking Start > Control Panel > System and
Maintenance > Device Manager > Network
Adapter.
178
Q
Q
The signal strength is excellent, but I cannot
connect to the network.
I cannot connect to the AP.
► Even if the signal strength is excellent, the
network connection may not operate properly
if the TCP/IP properties are not properly
configured, or the network key (encryption key)
is incorrect.
► Check the Computer Settings
A1Select Start > All Programs > Accessories >
Windows Mobile Center and check the wireless
device status.
● When it is represented as Disconnected This means
the computer is not connected to the AP. Check the
status of the AP, referring to the descriptions of the
Checking the SP Settings section below. Check
the encryption key configured in the AP and retry to
the connection.
A Check that the TCP/IP properties are configured
properly. When connecting to an AP, right-click the
Network Connections ( ) icon on the taskbar and
select Network and Sharing Center. If you click the
View Status next to a connected wireless network
device and then click the Detail button, you can view
the IP information. If the IP is not allocated properly,
the IP address will be displayed as follows (e.g.
169.254.xxx.xxx).
If the network does not provide DHCP, you have
to specify the correct IP address by asking your
network administrator.
Even if the network provides DHCP, the server may
not allocate an IP address to the client properly, and
the client station cannot connect to the network.
● When it is represented as Connected, but you cannot
connect to the Internet This means the computer is
connected to the AP, but the AP or external network
connected with the AP may have a problem.
● When the There is no wireless LAN adapter
message appears or there is no wireless LAN
icon
This means the wireless LAN device is set to Do
Not Use or the device is not recognized.
Check if the wireless device is properly
recognized in the Device Manager window. If the
device is set to Do Not Use, right-click and select
Use from the pop-up menu.
179
A2 Verify whether the same network key (encryption
key) has been entered for both the AP and the
computer. The network key is an encryption key for
encrypting the data transmitted between the AP and
the computer. It is recommended setting the network
key manually.
A6 Check the network key settings (encryption
key) again. When automatic code conversion (a
passphrase function) has been selected and data
communication is not functioning even with a normal
wireless connection, it is recommended entering the
network key (encryption key) manually.
► Check the AP Settings
A7 Check the AP settings as follows. (The following is
recommended for a standard environment and thus
may differ according to the specific wireless network
environment.)
For the AP settings, refer to the User Guide provided
by the AP manufacturer.
A3 Verify whether the environment is suitable for using
a wireless LAN. The use of a wireless LAN may be
restricted according to the environment and distance.
Obstacles such as walls or doors affect the use of
a wireless LAN. Install the AP in a high and open
space, 50cm from the wall and far removed from any
other radio signal sources.
A4 Verify whether the AP is operating properly.
● When the AP is not operating normally, turn off
the AP, wait a short while, and turn it on again.
● Verify whether the AP’s firmware is the most
recent version. (Contact the AP manufacturer or
the place where you purchased the AP for details
of the AP firmware.)
● When several APs are present simultaneously,
check the channel settings for each AP. When
different APs are using nearby channels,
interference may occur between the electronic
waves. Set the AP channels further apart from
each other. (Ex: Ch1, Ch5, Ch9, Ch13)
● When an AP’s SSID (Service Set ID) option is set
to “Hide”, you cannot search for that AP on the
computer. We recommend unselecting the “Hide”
option for the AP. The SSID is a name used for
distinguishing one wireless LAN from another
wireless LAN.
● It is recommended using Long Preamble.
Preamble is a signal for data transmission
synchronization. Short Preamble may be
supported by some types of APs but may cause
compatibility problems.
A5 Verify whether the AP has been properly connected
to the network. Verify whether the network is
operating normally by connecting the wired network
cable, which has been connected to the AP, to your
computer.
● It is recommended using a static IP.
● Since static channel selection is more reliable
than auto channel selection, it is recommended
using a static channel.
180
Q
I cannot connect to a computer connected to the
Ad-Hoc network.
Q
During the wireless Ad-Hoc network operation,
the AP (Access Point) is intermittently not found.
A1 Check the security settings and network name of the
wireless Ad-Hoc network.
A2 Check the TCP/IP settings of the computers
connected to the wireless Ad-Hoc network. The IP
addresses of the computers to be connected to a
wireless Ad-Hoc network must be set to the same
sub-network address.
● For example, if the TCP/IP setting is configured
to a fixed IP address, select Use the following IP
address in the TCP/IP Properties of the wireless
adapter, configure the items as follows and try
again.
A This problem occurs intermittently during the wireless
Ad-Hoc network operation. Even if this problem
occurs, the wireless Ad-Hoc network operation is
working properly and is not affected. Click Refresh to
update the AP list.
Q
I have set the same IP address for both the
wireless and wired connections, but they do not
work properly.
A You cannot use wireless and wired connections
using the same IP address. To sequentially use
both the wired and wireless connections with the
same IP address, you need to set the currently not
needed connection to Do Not Use in the Network
Connections of the Control Panel.
IP: 10.0.0.1~10.0.0.254, Subnet Mask:
255.255.255.0.
It is recommended using a fixed IP address for
wireless Ad-Hoc network connections.
A3 You have to register the IP address allocated for
the wireless adapter as a ‘Trusted IP’ in McAfee
SecurityCenter.
● Click McAfee SecurityCenter > Advanced
menu > Configure > Internet and Network
> Advanced > Trusted and Banned IPs, and
register the IP address or IP address range as a
Trusted IP address.
181
Game and Program Related
Q
The wireless LAN does not work properly when
there is a device operating on an adjacent
frequency in the vicinity of the product.
A1 Channel interference may occur when a wireless
video transceiver or a microwave oven is being used.
If you experience channel interference from other
equipment, we recommended changing the channel
for connecting to the AP. For more information about
AP settings, refer to the User Manual supplied by the
AP manufacturer.
A2 Since IEEE802.11g equipment operates in hybrid
mode when there is active IEEE802.11b equipment,
the data rate may be degraded.
Windows Vista may not provide some functions properly
when performing some applications especially games, or
may cause a problem due to a device driver compatibility
issue. For the latest device drivers and bug fixes, please
refer to the respective company’s website.
Q
A 3D game does not work, or some functions are
not working.
A Change the graphics settings of the game to ‘2D’ or
‘Software Renderer’, then run the program again.
Q
The game is not displayed smoothly on the
screen.
A For 3D games, the texture data for the 3D screen
display is saved to the system memory.
If there is insufficient system memory, the data is
saved to the hard disk drive and loaded to memory
when required. This operation may temporarily stop
displaying the picture on the screen.
In this case, lower the game resolution or the screen
settings.
182
Bluetooth
Q
Q
The picture on the screen is displayed as a
broken image for some games.
When no headset is found or cannot be
connected
A A part of the picture on the screen may be broken
when playing some games that require a highspecification graphics card.
In this case, set the 3D function setting for the game
to a lower value or set the game resolution to a lower
value.
A1 If the headset is already connected to another
device, you will not be able to find the headset and
cannot connect to the headset even if the headset is
found. Disconnect the connection to the other device
and then start the search again.
A2 If the headset is connected to a power adapter, you
cannot make a Bluetooth connection.
Disconnect the power adapter and then retry.
A3 In general, a Bluetooth headset has 2 operating
modes, On/Off mode and Pairing mode.
To connect the headset to another Bluetooth device
such as a PC or cell phone, the headset must be in
Pairing mode.
Switch the headset to Pairing mode and then retry
the search operation.
In general, the headset in Pairing mode automatically
returns to On/Off mode after a certain period of time.
183
Q
A2 If your head set is a stereo headset, you have
to check if the headset is connected as a stereo
headset.
There is no sound or sound is intermittently
interrupted after connecting a headset
To resolve the problem, complete the procedures
below.
A1 If your headset is a mono headset, check
if a mono headset connection has been
made. In this case, to resolve the problem,
complete the procedures below.
 Double-click the Bluetooth icon on the Taskbar,
select the Audio tab and check the connection
status of the Bluetooth Stereo Audio that
corresponds to the corresponding headset in the
connected device list. If it is not connected, rightclick over the device and select Connect from
the pop-up menu.
 Double-click over the Bluetooth icon on the
Taskbar, select the Audio tab and check the
connection status of the Bluetooth HandsFree Audio for the headset in the connected
device list. If it is not connected, right click over
the device and select Connect from the pop-up
menu.
 Right-click over the Speaker icon on the Taskbar,
select Playback Devices, and make sure that
the Bluetooth Hands-free Audio is enabled.
If not, right-click over Bluetooth Hands-free
Audio and select Set as Default Device..
 Right-click over the Speaker icon on the Taskbar,
select Playback Devices, and make sure that
the Bluetooth Hands-free Audio is enabled.
If not, right-click over Bluetooth Hands-free
Audio and select Set as Default Device.
Note
184
After changing the Bluetooth or sound settings, you
must exit and re-run the audio/video player program
(such as Windows Media Player) to apply the
changed settings.
HD DVD (Optional)
Q
Q
Is it compatible with the existing CD/DVD
formats?
Can I burn a HD DVD disk using a general CD-RW
or DVD-RW drive?
A All Burning, Playback and Authoring functions are
supported for the CD/DVD formats.
A A general CD-RW or DVD-RW drive does not support
burning the HD DVD format.
Q
Q
Can I play Blu-Ray titles?
Can I burn a HD DVD disk using the CyberLink
DVD Solution?
A Since HD-DVD and Blu-Ray disk are different, BluRay titles are not supported.
A Although the CyberLink DVD Solution supports
burning the CD and DVD formats, it does not support
burning the HD DVD format.
Q
Which functions are supported for the HD DVD
disks?
A All Burning, Playback and Authoring functions are
currently supported for HD DVD disks.
185
Blu-Ray (Optional)
Q
Q
Is it compatible with the existing CD/DVD
formats?
Can I burn a Blu-Ray disk using a general CD-RW
or DVD-RW drive?
A All Burning, Playback and Authoring functions are
supported for the CD/DVD formats.
A A general CD-RW or DVD-RW drive does not support
burning the Blu-Ray format.
Q
Q
Can I play an HD-DVD title?
Can I burn a Blu-Ray disk using the CyberLink
DVD Solution (CDS)?
A Since HD-DVD and Blu-Ray disk are different, HDDVD titles are not supported.
A Although the CyberLink DVD Solution supports
burning the CD and DVD formats, it does not support
burning the Blu-Ray format.
Q
Which functions for the current Blu-Ray disk are
supported?
Q
Can I save 25GB data onto the each side of a BluRay disk?
A All Burning, Playback and Authoring functions are
currently supported for Blu-Ray disks.
A The current Blu-Ray disk standard does not support
double sided recording. Currently, you can save data
onto a single side only. You can save 25GB data onto
a single layer disk, and save 50GB onto a dual layer
disk. (A dual layer disk consists of two layers.)
186
Other
Q
Q
4GB memory is not recognized by Windows
correctly.
The User Controls window appears when
installing or running a program in Windows Vista.
A This is due to a limitation in 32bit operating
systems that exists in notebook computers of
other manufacturers. Although the address space
of the 32bit operating system is 2³²= 4294967296
= 4,096MB = 4GB, all of it cannot be allocated
to memory, as some of it needs to be used for
other purposes by the operating system. Because
approximately 1GB of address space needs to be
allocated to other system resources such as the
BIOS, PCI Device, and VGA for a PC to operate
normally. Therefore, even if 4GB of physical memory
is installed, the address space allocated to memory
is limited to approximately 3GB.
A In this case, click Allow (or OK) to install or run
the program. However, if you do not have an
administrator account, you have to enter the
administrator password in the User Controls window
and then click Allow (or OK). If no administrator
password is set you can click Allow (or OK) without
entering a password.
Although users can upgrade their memory to 3 or
4GB, only 3GB is recognized even when 4GB of
memory is installed, and a memory upgrade to 4GB
is not recommended.
187
Product Specifications
The system specifications may differ depending on the derived models. For detailed system specifications, refer to
the product catalogue.
NP-Q45c/Q46c/P200
CPU
*
Intel® Core2 Duo Processor, Intel Celeron M Processor
Cache Memory
*
Main Chipset*
*
1MB / 2MB / 4MB
512MB ~ 2GB, Max 4GB, Memory type : DDR2 SODIMM
Main Memory
AMD RS600ME + AMD SB600
Hard Disk Drive
ODD
*
*
9.5mmH SATA HDD (80G ~ 250G)
Super Multi (DL/LS), DVD-COMBO, DVD-ROM
*
ATI Radeon Xpress 1250M(Internal)
Graphics
Sound Chipset
Network
*
PCI ExpressCard Slot
*
ALC262-GR
Fax/Modem : V.92
Wired LAN : Marvell 10/100
Wireless LAN : 802.11BG
Bluetooth 2.0+EDR
PCI Express Card Support
Multi Card Slot
Memory Stick / Memory Stick Pro / SD Card / xD Card / MMC / MMC Plus
Ports
Dimensions
LCD
USB 2.0 X 2, VGA, RJ45, RJ11, Headphone-out ,Optical S/PDIF, MIC-in, AC-IN JACK, Kensington Lock
Weight
1.92Kg
*
299x217x26.9~36.1 mm
12.1” WXGA (1280x800)
*
Battery*
Lithium-Ion Smart Battery: 6 Cells
Operating
Environment
Operating Voltage
Frequency
Temperature : -5~40°C for storage, 10~32°C when operating
Humidity : 5~90% for storage, 20~80% when operating
100 - 240VAC
50 / 60Hz
Output Power
Output Voltage
60W
*
Caution
19VDC
*
■
The ( ) mark represents optional components. Optional components may not be provided or different components may be
provided depending on the computer model.
■
The system specifications are subject to change without notice.
■
The hard disk drive capacity of a computer in which Samsung Recovery Solution II is installed, is represented as smaller
than the product specification.
188
Wireless LAN Specifications (802.11BG Card)
Atheros Wireless Network Adapter
 The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication
Systems.
Item
Physical
Specifications
Power
Specifications
Network
Specifications
Detailed Specifications
Dimensions
30.0 × 50.95mm (Width X Height)
Operating
Temperature And
Humidity
Temperature: Between 0°C and 70°C, Maximum Humidity: 85%
Sleep Mode
726mW
Receive Mode
1.353W
Transmission Mode
2.046W
Power
3.3V
Compatibility
IEEE 802.11b, IEEE 802.11g
Operating System
Microsoft Windows XP/Vista
Media Access Protocol
(MAC)
CSMA/CA (Collision Avoidance) with Acknowledgement (ACK)
Security
Wired Equivalent Privacy support (WEP) 64bit/128bit WPA
*
*This device supports the Wireless LAN Security Specifications WPA (Wi-Fi Protected Access) for Wi-Fi.
To connect to a WPA wireless network, you have to configure the settings according to the network connection
environment. For detailed setting information, ask your network administrator.
189
 Radio Specifications
RF Band
2.4GHz
Supported Channels
Channels allowed per country.
Device
Transceiver
Standard Output Power
MAX 10mW
Modulation Scheme
DSSS, CCK, OFDM
Data Rate (Mbps)*
Antenna Type
11b mode : 11, 5.5, 2, 1
11g mode** : 54, 48, 36, 24, 18, 12, 9, 6
Built-in Antenna
* The data rate may differ from the real data transmission rate.
** 11g mode is supported only when you are connected to an IEEE 802.11g device (e.g. An Access Point supporting IEEE
802.11g).
190
Registered Trademarks
Samsung is a registered trademark of Samsung Co., Ltd.
SENS is a registered trademark of Samsung Electronics
Co., Ltd.
Intel, Pentium/Celeron are registered trademarks of the
Intel Corporation.
Microsoft, MS-DOS, and Windows are registered
trademarks of the Microsoft Corporation.
“Memory Stick” and
are trademarks of the Sony
Corporation.
All other product or company names mentioned herein are
registered trademarks of their respective companies.
Macrovision Certification
This product incorporates copyright protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
191
Glossary
The Glossary lists the terminologies used in this User Guide.
For terminologies other than these, look in Windows Help.
Backup
Direct X
A way to save the current data to restore it later if
necessary. A backup is a way to restore computer data
when the data or computer is damaged.
An application interface developed to enable Windows
application programs to access hardware devices
at a very high speed. Since the operating speed of
graphics, memory and sound cards must be very fast
to provide high quality video and sound for games,
Direct X enables faster control and interaction between
applications and hardware devices. By using Direct
X, the multimedia performance of Windows has been
hugely improved.
Client
This refers to a computer that uses a shared network
resource provided by a server.
DDR SDRAM (Double Data Rate Synchronous Dynamic
Random Access Memory)
DRAM is a memory type whose cells consist of a
capacitor and transistor manufactured at a low price.
SDRAM is a memory type whose performance has
been improved by synchronizing the clock with the
external CPU clock. DDR SDRAM is a memory type
whose performance has been improved by doubling
the operating speed of the SDRAM and is widely used
nowadays. This computer uses DDR SDRAM.
Driver
Software that interacts between the hardware and
the operating system. An operating system knows the
hardware information and controls the hardware. In
general, a driver is supplied with the corresponding
hardware device.
DVD (Digital Versatile Disk)
DVD was developed to replace CD (compact disk).
Although the shape and size of the disc are the same
as that of a CD, the capacity of a DVD is at least 4.7GB
while the capacity of a CD is 600MB. DVD video is
digital unlike VHS (analog) video and supports MPEG2
compression and digital audio. To play a DVD, a DVD
drive is required.
Device Manager
An administrative tool used to manage computer
devices. You can add or remove hardware or update a
device driver using the Device Manager.
192
Firewall
LCD (Liquid Crystal Display)
A security system used to protect an internal network or
intranet from external networks
There are Passive Matrix and Active Matrix LCD types.
This computer uses the Active Matrix type LCD called a
TFT LCD. Since an LCD is implemented by transistors
instead of a cathode-ray tube unlike a CRT, its size can
be slim. And because it does not blink, it reduces eye
strain.
through an authentication procedure.
Hibernation Mode
A power mode that saves all data in memory to the
hard disk and turns the CPU and hard disk off. When
canceling Hibernation Mode, all application programs
that were running are restored to their last state.
Network
This refers to a small image that represents a file that
users can use.
A group of computers and devices, such as printers
and scanners, connected by a communications link.
A network can be either small or large and can be
connected permanently through cables or temporarily
through telephone lines or wireless links. The biggest
network is the Internet, a worldwide network.
LAN (Local Area Network)
Notification Area
Icon
A communications network connecting computers,
printers and other devices within a local area such as
within a building. A LAN enables all connected devices
to interact with other devices on the network. The
current LAN uses the Ethernet media access control
method developed in the early 1980s. To connect to an
Ethernet, a network card called a LAN card, Ethernet
card or network interface card is required. To exchange
data between computers, a protocol is required besides
the hardware equipment. Windows Vista uses TCP/IP
as the default protocol.
This refers to the right area of the Taskbar including
program icons such as the volume control, the power
options and the time.
Power Schemes
This refers to a pre-determined power management
option group. For example, you can set the time the
computer waits before entering Standby Mode, or
before the monitor or hard drive turns off. The settings
are saved as a power scheme.
193
Quick Launch
Sleep Mode
This refers to a toolbar that can be configured so that
you can launch a program such as Internet Explorer or
display the Windows Desktop with one click. You can
add any icon to the quick launch area of the Taskbar
and launch frequently used program by clicking that
icon.
A power mode that enables computers to save power
consumption when they are not being used. When a
computer is in Sleep Mode, the data on the computer
memory is not saved to the hard disk. If the power is
tuned off, the data in memory will be lost.
System File
Server
System Files refer to files that are read and used by
the Windows operating system. In general, system files
must not be deleted or moved.
In general, a server refers to a computer that provides
shared resources for network users.
Share
This refers to setting a resource of a computer such as
a folder or printer so that other users can also use it.
Shared Folder
A folder that can be used by other users on the network.
Network Administrator
A user who plans, configures and manages network
operations. Sometimes, a network administrator is
called a system administrator.
194
USB (Universal Serial Bus)
This refers to a serial interface standard developed
to replace the conventional interface standards such
as Serial and PS/2. While USB 1.1 supports 12Mbps
(12 million bits per second), USB 2.0 supports a data
rate that is 40 times (480Mpbs) faster than that of USB
1.1. The data rate of USB 2.0 is equivalent to that of
IEEE1394. Therefore USB 2.0 is used for A/V devices
supported by IEEE 1394 and a 2nd HDD and CDRW
that require a high data rate.
Windows
The name of an operating system developed by the
Microsoft Corporation. Windows Vista is installed on this
computer.
Windows Media Player
A multimedia program included with Windows. Using
this program, you can play a media file, create an audio
CD, listen to a radio broadcast, search and manage
media files, and copy files to a portable device, etc.
195
Index
A
AVStation Now
L
131
B
Battery Battery Calibration BIOS Setup Bluetooth Booting Priority 144
148
135
105
141
51
145
49
98
61
82
114
62
72
E
Easy Battery Manager
Easy Network Manager
Memory Modem Connection
Multi Card Slot
Multimedia 142
104
57
112
146
100
Samsung Update Plus 116
Security Lock Port
149
Safety Precautions
7
Shortcut Keys 46
SlideShow 128
Status Indicators 38
T
Touchpad48
Network Network Status Diagnosis
100
103
U
User Accounts / Switch User P
Password Play AVStation
Playing Music Product Name
Product Specifications Program 139
118
125
37
188
111
R
Recorder 65
Remaining Battery Charge 145
Resolution / Color 86
H
Help 134
N
D
Dual View Desktop / Change LCD Brightness M
C
CD Drive / Recording Charge Click Connecting AP / AP Connect / Output Monitor Control Panel CyberLink PowerDVD S
71
196
84
V
Video Play Volume Control 120
64
W
Wired Network Wireless Network Windows Vista
95
98
70
Contact SAMSUNG WORLD WIDE
[U.S.A. / U.K.] Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care
center.
Customer Care Center
TEL
Web Site
U.S.A.
1-800-SAMSUNG (726-7864)
www.samsung.com/us
U.K.
0870-SAMSUNG (726-7864)
www.samsung.com/uk
[FRANCE] Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Consommateurs Samsung.
Customer Care Center
TEL
Web Site
FRANCE
3260 SAMSUNG (726-7864)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com/fr
[GERMANY] Kontakt zu Samsung
Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den SamsungKundendienst.
Customer Care Center
TEL
Web Site
GERMANY
01805 121213 (€ 0,14/Min)
www.samsung.de
[SPAIN] Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de
Atencion al Cliente.
Customer Care Center
TEL
Web Site
SPAIN
902 10 11 30
www.samsung.com/es
197
[ITALY] Contatta SAMSUNG
Se hai commenti o richieste sui prodotti Samsung contatta il nostro Servizio Clienti.
Customer Care Center
TEL
Web Site
ITALY
800-SAMSUNG (726-7864)
www.samsung.com/it
Customer Care Center
TEL
Web Site
RUSSIA
8-800-555-55-55
www.samsung.ru
UKRAINE
8-800-502-0000
www.samsung.ua
Customer Care Center
TEL
Web Site
CHINA
800-810-5858
010-6475 1880
www.samsung.com.cn
[RUSSIA / UKRAINE]
[CHINA]
[HONG KONG] Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care
center.
Customer Care Center
TEL
Web Site
HONG KONG
3698-4698
www.samsung.com/hk
Rev.1.6
198
Download PDF