WASHING MACHINE
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping tile manual.
Otherwise, it should be bought separately.
FEATURES
SAFETY INSTRUCTIONS
DESCRIPTION OF PARTS
CONTROL PANEL
WASHING PROCEDURE
Fuzzy course
Baby course
Speedy course
Blanket course
Wool course
Soak function
Delay start course
MANUAL FUNCTIONS
INSTALLATION & MAINTENANCE
Environment
Levelling
Connecting the water supply hose
Assembling the rat protection panel
How to put the detergent in
Water supply connector filter
Cleaning the filter net
Connecting the drain hose
Cleaning the filter net
TROUBLESHOOTING
SPECIFICATIONS
The User's Manual is for common use.
Make use of the User's Manual depending upon your washing machine model.
1
2
3
4
5
5
5
5
5
5
5
5
6
7
7
7
7
8
8
8
8
9
9
10
FEATURES
FUZZY CONTROL
Fuzzy control operates with best washing course by sensing
the washload like artificial intelligence.
SOAK COURSE
The detergent can be dissolved and contact the laundry completely, in
this course, the dirt can be wiped off.
SPEEDY COURSE
Because washing is speedy, it is good for light or less stained laundry.
BABY COURSE
The Baby course is designed to protect the children's skin. In this course
rinse times is once more than other course. The children's skin can be protected.
DELAY START COURSE
When you have something to do, you can use this course. The washing is
finished by the time you reserved. You'd better give the clothes an airing to keep them from being crushed.
1
SAFETY INSTRUCTIONS
WARNING
CAUTIONS
There might be serious injury or fatal accident when
you violate this instruction.
There might be a slight injury or damage when you
violate this instruction.
If the power supply cord or plug is damaged or
loosened, do not use.
An electric shock or a fire may take place.
Don't install it in the area with moisture or outdoor
where there is rain or snow
An electric shock or a fire may take place.
Do not pull the cord off or touch it with moist hands.
An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it completely.
An electric shock or a fire may take place.
Do not install the washer nearby electric implement
or don't put a candle light or cigarette light on the
washer.
A fire may take place.
Do not disassemble, repair or remodel it recklessly.
When you need to repair it, please call service
agent. An electric shock or a fire may take place.
Do not make your kids look into the inside of the
washer.
If your kid falls into the washer, his life could be
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
An electric shock or a fire may take place if it
catches flame.
During operation, do not put your hands or metal
materials under the washer.
You may be hurt by spinning board beneath
the washer.
If the washer makes strange noise, smell or smoke,
unplug it promptly and call service agent.
An electric shock or a fire may take place.
Stay away from the washer when the bottom of the
washer sinks into the water.
There might be an electric shock. Please
wait until the water drains out completely.
When cleaning, don't spray water to the parts of the
washer directly.
It may make it's life span shorten.
Also an electric shock or fire may take place
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
An explosion or a fire may take place.
Don't use several appliances together with an
outlet.
A fire may take place due to unusual heat.
During spinning, don't put your hands into the
spinning tub.
It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service agent immediately.
Don't press the button with an awl or pin.
An electric shock or a fire may take place.
The washing machine is to be connected to the
water mains using new hose-sets and that old
hose-sets should not be reused.
After installation. the power plug must be easily
accessible.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid hazard.
2
3
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
FRONT CONTROL
PANEL
PULSATOR
BLEACH INLET
FABRIC SOFTENER
DISPENSER
Lint will be collected in
the filter during
washing.
FILTER
LID
Be sure to keep the lid
closed during washing
and spinning.
SOUND ABSORPTION
PANEL
WATER DRAIN HOSE
GROUND LEAD
When the water pipe is
metal, make sure to cover
the end of the ground wire.
POWER CORD
SPIN BASKET
DETERGENT BOX
DRAIN-HOSE (PUMP)
WATER SUPPLY HOSE(COLD)
WATER SUPPLY HOSE(HOT)
DESCRIPTION OF PARTS
Tile User's Manual is for common use.
Make use of the User's Manual depending upon your washing machine model.
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY BABY SPEEDY BLANKET WOOL FUZZY
FUNCTION SELECT BUTTON
With every press of this button, the function changes; WASH, RI NSE, SPIN
SOAK, WASH, RINSE, SPIN WASH RINSE SPIN WASH,
RINSE RINSE, SPIN WASH, RINSE, SPIN
WATER LEVEL SELECT BUTTON
According to the washload, select the water level;
MED HIGH EXTRA LOW LOW MED
DELAY START BUTTON
Press this button when delay start washing is needed.
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle, the power automatically switches off.
FUNCTION INDICTOR LIGHT
The function in use indicator shows the
current function as a flashing symbol.
he light goes out at the end of the function.
4
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
FUZZY COURSE
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
WOOL COURSE
Extra Iow water level is not
available. Cold water is selected.
1 .Press the POWER button to "ON".
2.Press the course select button four times.
3.Press the START/HOLD button.
Selects the best washing course
automatically
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You cart change the course when paused.
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You can change the course when paused.
4. Close the lid.
CAUTION...
3. Close the lid.
-Do not use water above 30~C for WOOL washing.
-Refer to the rag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
BABY COURSE
This course can keep the childrn's skin from
being hurt by detergent.
1 .Press the POWER button to "ON".
2.Press the course select button once.
3.Press the START/HOLD button.
SOAK FUNCTION
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You can change the course when paused.
FUNCTION
1 .Press the POWER button to "ON".
2.Press the function select button once.
3.Press the START/HOLD button.
4.Colse the lid.
SPEEDY COURSE
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You can change the course when paused.
Because washing is speedy, it is good for
light or less stained laundry.
1 .Press the POWER button to "ON".
2.Press the course select button twice.
3.Press the START/HOLD button.
4.Close the lid.
DELAY START COURSE
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You can change the course when paused.
Select this course when you have to go out or do
soft, thing else.
1. Press the power button to "ON".
2. Press the DELAY START button once.
4.Colse the lid.
You may change the delay start time with
use the DEALY START button.
(from 3 hours' to 18 hours')
BLANKET COURSE
3. Press the START/HOLD button and put
the proper amount of detergent into tub.
4. Close the lid.
1.Press the POWER button to "ON".
2.Press the course select button three times.
3.Press the START/HOLD button.
The washing finishes by the time you reserved.
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again. You can change the course when paused.
4.Colse the lid.
It is good for heavy stained laundry.
5
MANUAL FUNCTIONS
Each washing course changes manually.
Ex) If you want to wash in the speedy course: Power - Select speedy course - Wash - Start/Hold button
once
twice
three times
four times
five times
six times
SOAK AND WASH AND RINSE AND SPIN
Press the POWER button.
Press the FUNCTION SELECT button once.
Press the START/HOLD button once.
Soak, washing, rinsing, and spinning follow.
When the FUNCTION button is pressed during washing,
the rinse times can be changed to between 1 and 5
times in duration.
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button twice.
Press the START/HOLD button once.
Washing goes on.
When the FUNCTION button is pressed during washing,
the wash time can be changed in duration.
RINSE ONLY
Press the POWER button.
Press the FUNCTION SELECT button three times.
Press the START/HOLD button once.
Rinse goes on.
When the FUNCTION button is pressed during rinse,
the rinse times can be changed to between 1 and 5 times in duration.
SPIN ONLY
Press the POWER button.
Press the FUNCTION SELECT button four times.
Press the START/HOLD button once.
Spin goes on.
When the FUNCTION button is pressed during spinning,
the spin time can be changed in duration.
WASH AND RINSE
Press the POWER button,
Press the FUNCTION SELECT button five times,
Press the START/HOLD button once.
Washing, rinse follow.
When the FUNCTION button is pressed during washing,
the rinse times can be changed to between 1 and 5 times in duration.
RINSE AND SPIN
Press the POWER button.
Press the FUNCTION SELECT button six times.
Press the START/HOLD button once.
Rinse, spin follow.
When the FUNCTION button is pressed during rinse,
the rinse times can be changed to between 1 and 5 times in duration.
6
INSTALLATION & MAINTENANCE
The User's Manual is for common use.
Make use of the Uer's Manual depending upon your washing machine model.
Never install the washer near water.
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain. Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat, never place the washer near furnaces, boilers, etc.
Do not place it under direct sunlight.
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise
or vibration occurs. (Allowable is 1 )
Adjust the legs for even placement.
LEVELLING
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
1. Adjust the side horizontally
Open the lid of the machine, pour water into the tub up to the level
first and the front
just below the pulsator, and adjust the legs so that the pulsator is
in the same direction next.
positioned at the center of the water as shown in the figure.
2. If the thread is not
Place the machine more than
within the limit, adjust
Water
10cm away from the wall.
Adjust the legs on feet
the height of
for levelling.
the legs.
Loosen
Lock
CONNECTING THE WATER SUPPLY HOSE
1. Remove the adaptor
from the water
supply hose.
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
2. First, using a "+" type
screw driver, loosen the
four screws on the adaptor.
Next, take the adaptor and
turn part(b) following the
arrow for gap about 5mm
between them.
3. Connect adaptor to the
water tap by tightening
the screws firmly.
Then, turn part (b)
following the arrow and
put (a) and (b)together.
5-1 .Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the way in.
a
b
If the water tap is a screw type, assemble
a water supply hose that fits to the
tap as shown.
a
b
4. Connect the water supply
hose to the adaptor. Pull down
the part (c) of the water supply
hose .When the part (c)is released,
the hose is automatically
connected to the adaptor
making a 'click' sound.
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply
c
In case the faucet is square or too big, remove the spacing
ring before inserting the faucet into the adaptor.
7
ASSEMBLING THE RAT PROTECTION PANEL
1.Insert the sound
absorbing panel
to the assembling
hole on back side
to the end.
Tilt the washer a little and lift up the panel until it clicks,
finally fix the panel with screw to the base as shown
in the figure.
2.If you have difficulty
inserting the panel,
lift up the washer a
little and insert it
HOW TO PUT THE DETERGENT IN
1 .Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION: If softener is stored over the above base line, it may flow down at any time.
WATER SUPPLY CONNECTOR FILTER
inlet water
valve
1.Pull out the filter and wash it well.
2. Pull in the filter and connect
the hose to the inlet water
valve tightly.
3. Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.
1. Push up and
pull out the filter net.
2. Remove the collected
lint from the filter net.
8
3. Clean the filter.
4. Pull down the filter net.
CONNECTING THE DRAIN HOSE
The drain hose is normally connected on the right side of the machine. Consumers can refit it on the bit if necessary.
NOTICE:
Before refit, the power supply must be cut of (For the danger of getting an electric shock)
1.
2. The removal of the linking pipe
Remove the screws on the drain mouth, then press
the linking pipe and take down the drain mouth from
the shell of the box.
Pull up the fixed part to make it apart from the shell.
Remove the screws and take down the back
cover.
Remove the screws,and take down the left cap.
1
1
2
2
Cap
3. The installation of the linking pipe
Press the linking pipe then insert the drain mouth
into the box shell and fix it with the screws.
Press the fixed part then insert into the hole in the
middle of box.
4.
Fit the back cover.
Aim the cap at the cavity in the shell of the
box then fix it with the screw.
Connect the drain hose.
1
1
2
3
2
NOTICE:
When inserting the linking pipe, it can't be twisted or tied.
If the linking pipe is wrongly installed, there will be water leaking.
CLEANING THE FILTER NET
Please clean the filter net often: Pull out the filter net in the inlet water valve and clean the dirt on it with a brush.
Insert it into the valve after being washed with water.
NOTICE:
The dirt on the filter net will produce some problems, like water not
supplied or only little flow of water supplied. After clean it, please be
sure to insert the filter net into the valve.
9
TROUBLESHOOTING
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Is the fuse broken?
Is the START/HOLD button pressed?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in I hour, a
buzzer will sound, and the remaining
time indicator will show "4E".
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound, and the
remaining time indicator will show "5E".
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is the lid colsed?
10
330W
W530
MAXIMUM MUSS OF DRY CLOTH
D535
H880
WA71: 5.0 kg / WA71S: 5.2 kg
WA71: 30 kg / WA71S: 31 kg
HIGH
50 l
MED
43 l
LOW
35 l
EXTRA LOW
28 l
150 l
0.05~0.78 MPa (0.5 ~ 8.0 kg
2
f/cm )
Stirring Type
CODE NO.: DC68-01950A
Download PDF