Samsung | SP-43Q5HD | Samsung SP-43Q5HD Felhasználói kézikönyv

BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 1
DIGITAL
TELEVISION
SP43W6
SP42Q2
SP43Q5
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
Register your product at www.samsung.com/global/register
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 2
S
p
sh
g
p
W
p
sh
m
sc
p
A
g
d
g
b
im
O
fo
B
ag
y
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 3
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
B
e careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
English - 3
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 4
Contents
◆ FOREWORD
■
Important Warranty Information Regarding Television Format Viewing ........
3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panels (depending on the model) .....................................................
Connection Panels (depending on the model) ..............................................
Using a Display Deck (depending on the model) ..........................................
Inserting the Batteries in the Remote Control................................................
Infrared Remote Control ................................................................................
Connecting to an Aerial or Cable Television Network ...................................
Connecting a Satellite Receiver or Decoder..................................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug and Play Feature ...................................................................................
Changing Channels .......................................................................................
Displaying Information ...................................................................................
Choosing Your Language..............................................................................
Adjusting the Screen Automatically (Self Focus)...........................................
Deactivating the Automatic Execution of the Self Focus ...............................
Removing the “Self Focus” from the Display .................................................
6
7
8
8
9
10
11
12
12
13
14
16
17
17
18
19
20
◆ USING THE DTV FEATURE
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Previewing the DTV Menu System................................................................
Choosing Your Language..............................................................................
Adjusting the Translucency Level..................................................................
Updating the Channel List Automatically.......................................................
Updating the Channel List Manually..............................................................
Editing Your Favourite Channels...................................................................
Setting up the Parental Lock .........................................................................
Viewing EPG (Electronic Programme Guide) Information.............................
Using the Scheduled List...............................................................................
Setting the Default Guide ..............................................................................
Viewing All Channels and Favourite Channels..............................................
Viewing Channel Lists ...................................................................................
Displaying Programme Information ...............................................................
Using Your Preferred Features......................................................................
Viewing Product Information..........................................................................
Checking the Signal Information....................................................................
Upgrading the Software (Option)...................................................................
Viewing Common Interface ...........................................................................
Selecting the CI Menu ...................................................................................
Resetting .......................................................................................................
Freezing the Current Picture .........................................................................
21
22
23
24
25
26
28
29
30
32
33
34
35
36
37
37
38
39
40
41
41
◆ SETTING THE CHANNELS (ANALOG TV)
■
■
■
■
■
Storing Channels Automatically.....................................................................
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
English - 4
42
43
44
46
47
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 5
Contents (continued)
◆ SETTING THE CHANNELS (ANALOG TV) (continued)
■
■
Locking the Channel......................................................................................
Fine Tuning Channel Reception ....................................................................
48
49
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) Feature...............................................
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Selecting the Picture Size (Wide Model : Analog Mode) ...............................
Selecting the Picture Size (Wide Model : DTV Mode) ...................................
Selecting the Scan Mode...............................................................................
Setting the Digital NR (Digital Noise Reduction) ..........................................
Setting the Blue Screen ................................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings.....................................................................................
- Auto Volume
- Dolby Virtual
Setting the Melody Sound .............................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Viewing an External Signal Source ...............................................................
50
51
52
54
56
58
59
60
61
62
63
64
65
66
67
68
69
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
Storing Teletext Pages (depending on the model) ........................................
70
71
72
73
74
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the Common Interface............................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
Redirecting an Input to the External Output ..................................................
75
76
76
77
78
79
80
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................
- VCR Remote Control Codes .......................................................................
- Cable Box (CATV) Remote Control Codes .................................................
- DVD Remote Control Codes .......................................................................
Troubleshooting: Before Contacting Service Personnel................................
Symbols
Press
☛
Important
81
82
82
82
83
➢
Note
English - 5
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 6
Control Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
➢
SP43W6
SP42Q2
SP43Q5
( a ) Input Source Selection
➢
( e ) Channel Selection
( b ) Menu Display
(f)
( c ) Accessing to the Selected Option
on the Menu System
( g ) Standby & Timer Indicator
Remote Control Sensor
( h ) Power On/Off
( d ) Volume Adjustment
(i)
Picture On/Off
◆ You can use the
C/P.
buttons to switch on the TV when it is in standby mode depending
on the model.
◆ The + and
C/P.
buttons have the same function as the ▲/▼/œ/√ buttons
on the remote control in main menu mode.
◆ If the remote control no longer works or your have misplaced, you can use controls on the panel of
the TV.
English - 6
➢
☛
n
BP68-00491B_01(J60C_UK)
2006/03/15
03:21 PM
Page 7
Connection Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Rear of the TV
Common Interface
Component Input
Audio Output
75Ω Coaxial
Connector for Aerial
or Cable Network
SCART Audio/Video
Input/Output
Service Port
➢
➢
☛
◆ Please be sure to match the colour coded input terminals and cable jacks.
◆ For further details about connection, refer to pages 75~79.
Available format for Component inputs; 480i, 480p, 576i, 576p, 1080i - 50Hz.
Whenever you connect an audio or video system to your television, ensure that all elements are
switched off. Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
English - 7
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 8
Using a Display Deck (depending on the model)
You can display a VCR or DVD Player, etc. by using the display
deck.
SP43W6
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢
English - 8
Do not mix battery types, i.e. alkaline and manganese.
n
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 9
Infrared Remote Control
TELEVISION STANDBY
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
SWITCH BETWEEN TV AND DTV
MODE
MAKE THE REMOTE CONTROL WORKS
FOR TV, STB, VCR, CABLE, DVD
PLAYER
DIRECT CHANNEL SELECTION
EPG DISPLAY/
ONE OR TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
DTV MENU DISPLAY/
TELETEXT SIZE SELECTION
DTV CHANNEL LIST DISPLAY
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
FASTEXT TOPIC SELECTION/
EPG DISPLAY/
FAVOURITE CHANNEL EDITION
CONFIRM YOUR CHOICE
(ANALOG TV : STORE OR ENTER)
(DTV : OK, SELECT, OR ENTER)
DIGITAL SUBTITLE DISPLAY
PICTURE FREEZE
SELF FOCUS
SURROUND ON/OFF DIRECTLY
SOUND MODE SELECTION
TELETEXT SUB-PAGE
REMOTE CONTROL SETUP
SWITCH REPEATEDLY BETWEEN
THE LAST TWO CHANNELS
DISPLAYED
AUTOMATIC SWITCH-OFF
PICTURE SIZE
VCR/DVD FUNCTIONS;
- REWIND (
)
- STOP ( )
- PLAY/PAUSE (
)
- FAST FORWARD (
)
TELETEXT CANCEL
TELETEXT STORE
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-INSERT
THE BATTERIES AND TRY USING
THE REMOTE CONTROL AGAIN.
➢
TELETEXT PAGE HOLD
The performance of the remote control may be affected by bright light.
English - 9
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 10
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Rear of the TV
or
Cable Television
Network
English - 10
1
In the first three cases, connect the aerial or network input cable to
the ANT IN on the rear of the television.
2
If you are using an indoor aerial, you may need to adjust it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ (Digital TV) “Updating the Channel List Automatically” on
page 24
◆ (Digital TV) “Updating the Channel List Manually” on page 25
◆ (Analog TV) “Storing Channels Automatically” on page 42
◆ (Analog TV) “Storing Channels Manually” on page 44
o
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 11
Connecting a Satellite Receiver or Decoder
Rear of the TV
In order to watch television programmes broadcast via a
satellite network, you must connect a satellite receiver to
the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder to the
rear of TV.
◆ Using a SCART cable
Connect the receiver (or decoder) SCART cable to one
of the SCART connectors on the rear of the television.
◆ Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
Coaxial
Cable
SCART
Cable
5
➢
If you wish to connect both a satellite receiver
(or decoder) and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Satellite receiver/
Decoder
Otherwise, connect the receiver (or decoder) directly
to the television.
English - 11
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 12
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the “ I ” button (On/Off) on the front or side of the television.
The Standby indicator on the front of the television
Result:
lights up.
3
Press the POWER ( ) button on the remote control to switch
the television on.
The programme that you were watching last is reResult :
selected automatically.
➢ If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
42 or “Storing Channels Manually” on page 44.
➢ You can also switch the television back on by pressing the
P / (or
C/P.
on the front panel) or numeric
button on the remote control.
4
To switch your television off, press the “ I ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
The screen is turned off and the Standby indicator on
Result:
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER ( )
button again.
➢ You can also switch on by pressing the TV/DTV or P /
button.
➢ You can also switch the television back on by pressing the
P / (or
C/P.
on the front panel) or numeric
button on the remote control.
☛
English - 12
T
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I ”
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
T
th
.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
e
-/--
PRE-CH
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
(
)
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
(
)
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
-
Used to confirm your choice.
➢
TV/DTV
Used to switch between
TV and DTV mode.
EXIT
(
)
-
Used to exit from the any
display.
English - 13
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 14
Plug and Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
Start Plug & Play
OK
Enter
1
Return
If the television is in Standby mode, press the POWER (
button on the remote control.
Result:
)
The message Start Plug & Play is displayed.
Setup
TV
:
English
Deutsch
Español
Italiano
English
Svenska
:
Off
Time
Plug & Play
Language
2
To start the Plug & Play, press the ENTER (
Result:
) button.
The options available in the Setup group are displayed
with Language is selected.
Self Focus
Blue Screen
3
▼ More
Move
Enter
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
Skip
4
Plug & Play
Make sure that the antenna is connected to the TV.
Press the ENTER (
) button.
Result:
Check antenna input.
OK
Enter
Skip
5
Country
:
Search
Move
Belgium
China
Germany
Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Enter
Skip
Clock
√ Move
Hour
Minute
--
--
Adjust
English - 14
Exit
) button.
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock menu is displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
Press the œ or √ button to move to the Hour or Minute.
Set these by pressing the ▲ or ▼ button.
➢
Start
TV
➢
7
The Search menu is displayed.
To start the channel store, press the ENTER (
Result:
Skip
Search
Enter
6
The Auto Store menu is displayed with Country is
selected.
Select your country by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
Auto Store
TV
The message Check antenna input. is displayed.
You can also set the Hour and Min by pressing the numeric
buttons directly.
If
➢
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 15
Plug and Play Feature (continued)
8
When you have finished, press the MENU (
Result:
) button.
The menu is turned to Auto Store in DTV mode
automatically.
d
If you want to reset this feature...
➢
1
Not available in DTV mode.
Press the MENU (
Result:
) button.
The main menu is displayed.
Setup
TV
√
Time
√
Plug & Play
2
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Plug & Play.
Press the ENTER (
) button.
Language
Result:
.
5
English
:
Off
Blue Screen
√
√
Self Focus
√
▼ More
) button.
Move
d
:
Enter
This feature starts with the message Start Plug &
Play is displayed.
For further details on how to set, refer to the opposite page.
l
c
English - 15
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 16
Changing Channels
➢
It may take some time to display a channel if your chosen channel
has the MHEG feature.
Using the P
/
buttons.
Y
b
Press the P / button on the remote control (
C/P.
on the
front of TV).
The TV changes channels in sequence. You can select all channels
(analog and digital channels) that the TV has memorized.
➢
You can not select channels that were either erased or not
memorized.
Using the numeric (0~9) buttons.
Press the numeric buttons to quickly tune to any channel.
➢
You can select all channels that were either erased or not
memorized.
To select analog channel 27, press the
, 2, then 7.
To select digital channel 27, press the 0, 2, then 7.
The TV will change channels when you press the second number.
To change to single-digit channels (0~9) faster, press the 0 before the
single digit. (For analog channel 4, press the 0, then 4. For digital
channel 4, press the 0, 0, then 4.)
➢
➢
English - 16
MHEG (Multimedia and Hypermedia Information Coding
Experts Group)?
An International standard for data encoding systems used
in multimedia and hypermedia. This is at a higher level
than the MPEG system which includes data-linking
hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia
data. MHEG is user runtime interaction technology and is
being applied to various fields including VOD (VideoOn-Demand), ITV (Interactive TV), EC (Electronic
Commerce), tele-education, tele-conferencing, digital
libraries and network games.
In the case of DTV mode, OK or Select can be used as the
ENTER (
) button.
W
se
in
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 17
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO ( )” button on the remote control.
P 1
Mono
Picture
Sound
12 : 02
: Dynamic
: Custom
Choosing Your Language
g
d
s
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Setup
TV
√
Time
√
Plug & Play
1
Press the MENU (
Result:
2
) button.
Language
English
:
Off
The main menu is displayed.
Blue Screen
√
√
Self Focus
√
▼ More
Press the ▲ or ▼ button to select Setup.
Result:
:
Move
The options available in the Setup group are displayed.
Enter
Return
e
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Language. Press the ENTER
(
) button.
) button.
Setup
TV
Time
Plug & Play
Result:
5
The languages available are listed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Language
English
Deutsch
Español
Italiano
Svenska
: English
Self Focus
Blue Screen
:
Off
▼ More
Move
Enter
English - 17
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 18
Adjusting the Screen Automatically (Self Focus)
Setup
TV
√
Time
√
Plug & Play
Language
:
English
:
Off
Result:
2
Enter
Press the MENU (
) button.
The main menu is displayed.
√
▼ More
Move
1
√
Self Focus
Blue Screen
√
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colours or incorrect focus
occurs. These conditions may be caused by moving your TV.
Press the ▲ or ▼ button to select Setup.
Result:
Return
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Self Focus. Press the ENTER
(
) button.
) button.
Self Focus
TV
√
Self Focus
Auto
:
On
√
Message Display
:
On
√
Result:
5
Press the ENTER (
Result:
Move
Enter
The Self Focus is selected.
Return
Self Focus
➢
➢
) button again
The self focus process begins with the message Self
Focus and horizontal bar is displayed. During the
process, minor distortions of the picture may occur. At
this time, the colors may diffuse and a searching action
will appear on the edges of the screen. This is a normal
part of the adjustment. When it is finished, all of things
will disappear and the optimum picture quality can be
enjoyed.
It can be displayed simply by pressing the SELF FOCUS
button.
◆ Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆ Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
English - 18
T
b
o
“S
m
d.
R
l
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 19
Deactivating the Automatic Execution of the Self Focus
The “Self Focus” feature starts on default. It will automatically
begin 10 minutes after switching on the power and the appearance
of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30
minutes, as the screen image is then fully stabilised.
Setup
TV
√
Time
Language
1
Press the MENU (
2
) button.
3
The main menu is displayed.
English
:
Off
√
√
√
▼ More
Press the ▲ or ▼ button to select Setup.
Result:
:
Self Focus
Blue Screen
Result:
√
Plug & Play
Move
Enter
Return
The options available in the Setup group are displayed.
Press the ENTER (
Self Focus
TV
) button
Self Focus
4
Press the ▲ or ▼ button to select Self Focus. Press the ENTER
(
) button.
Result:
Auto
:
Message Display
:
Off
On
On
On
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button to select Auto. Press the ENTER (
button.
6
To turn off the automatic execution of the self focus feature, select
Off by pressing the ▲ or ▼ button. Press the ENTER (
)
button.
)
Move
Enter
.
English - 19
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 20
Removing the “Self Focus” from the Display
➢
1
Press the MENU (
) button.
T
th
Setup
TV
Time
√
Plug & Play
√
Language
:
English
:
Off
Enter
Return
Press the ENTER (
4
Press the ▲ or ▼ button to select Self Focus. Press the ENTER
(
) button.
Result:
Auto
:
On
Message Display
:
On
Off
On
Enter
➞
The options available in the Setup group are displayed.
3
Self Focus
Move
Press the ▲ or ▼ button to select Setup.
Result:
Self Focus
TV
The main menu is displayed.
√
▼ More
Move
2
√
Self Focus
Blue Screen
√
Result:
Return
) button.
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button to select Message Display.
Press the ENTER (
) button.
6
To remove the message Self Focus and horizontal bar on the
screen during the self focus process, select Off by pressing the
▲ or ▼ button. Press the ENTER (
) button.
➞
➞
➞
➞
English - 20
d.
R
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 21
Previewing the DTV Menu System
➢
Available in DTV mode.
Preset to the DTV mode by using the TV/DTV button.
To help you navigate around the on-screen menu system and adjust
the various settings available, refer to the following illustration.
Press the “D.MENU” button.
➞ Guide
➞ Now & Next Guide
➞ Full Guide
➞ Scheduled List
➞ Default Guide
➞ Now/Next
➞ Full Guide
➞ Preference
➞ Preferred
Subtitle Language
➞
➞
➞
➞
➞ Preferred
➞
Audio Language
➞
➞
➞
➞ OSD Language
➞
➞
➞
➞
➞
➞ Translucency Level ➞
➞
➞
➞
➞ Parental Lock
➞
➞
English
Welsh
Gaelic
Irish
English
Welsh
Gaelic
Irish
English
Deutsch
Español
Italiano
Svenska
High
Medium
Low
Opaque
Parental Rating
Change PIN
➞ Feature
➞ Subtitle
➞ Subtitle Language
➞ Audio Language
➞ Digital Text
➞
➞
➞
➞
➞
➞
Off
On
English
English
Disable
Enable
➞ Channel
➞ Auto Store
➞ Manual Store
➞ Favourite Channels
➞ Channel List
➞ Channel
➞ Frequency
➞ Bandwidth
➞ SYSTEM
➞ Product Information
➞ Signal Information
➞ Software Upgrade
➞ Common Interface
➞ Application Info.
➞ CI Menu
➞ Reset
English - 21
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 22
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications
1
Press the D.MENU button.
Result:
2
Press the ▲ or ▼ button to select Preference.
Result:
3
) button.
The Preferred Subtitle Language is selected.
Press the ENTER (
Result:
) button again.
The available languages are listed.
5
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
6
Press the ▲ or ▼ button to select Preferred Audio Language.
Press the ENTER (
) button.
Result:
The available languages are listed.
7
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
8
Press the ▲ or ▼ button to select OSD Language.
Press the ENTER (
) button.
Result:
9
English - 22
The options available in the Preference group are
displayed.
Press the ENTER (
Result:
4
The DTV menu is displayed.
The available languages are listed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Y
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 23
Adjusting the Translucency Level
You can set the translucency of the on-screen menu.
1
Press the D.MENU button.
Result:
2
The DTV menu is displayed.
Press the ▲ or ▼ button to select Preference.
Result:
The options available in the Preference group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Translucency Level.
Press the ENTER (
) button.
5
Select the required option (High, Medium, Low, or Opaque) by
pressing the ▲ or ▼ button.
6
Press the ENTER (
) button.
) button.
English - 23
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 24
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new
services or if you move the TV to a new location.
1
Press the D.MENU button.
Result:
2
Press the ▲ or ▼ button to select Channel.
Result:
3
The options available in the Channel group are
displayed.
Press the ENTER (
Result:
4
The DTV menu is displayed.
Press the ENTER (
Result:
➢
) button.
The Auto Store is selected.
) button again to start the search.
When it has finished, the number of scanned services
will be displayed.
◆ The existing favourite channel list will be deleted when
the channel list is updated.
◆ To stop the scan before it has finished, press the
ENTER (
) or D.MENU button.
➢
English - 24
If the signal status is poor, the No service found!
Check the aerial connection message is displayed.
Y
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 25
Updating the Channel List Manually
You can specify the channel or frequency for a fast channel search.
1
Press the D.MENU button.
Result:
2
The DTV menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Manual Store.
5
Press the ENTER (
Result:
6
) button.
) button.
The options available in the Manual Store group are
displayed.
Press the œ or √ button to select Channel, Frequency, or
Bandwidth.
◆ Channel
Press the ▲, ▼ or numeric buttons (0~9) to select a channel.
The available channels are 21~68.
Result:
The corresponding frequency for the selected
channel is automatically set.
◆ Frequency
You can specify the frequency (KHz) using the numeric
buttons (0~9). If you do not know the exact frequency, follow
the above step to select the frequency automatically using
channel.
◆ Bandwidth
Press the ▲ or ▼ button to select a bandwidth. The available
bandwidths are 7 and 8 MHz.
➢
7
In England, 8MHz bandwidth is provided by default.
Press the red button to start the scan for digital services.
Result:
When it has finished, channels are updated in the
channel list.
English - 25
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 26
Editing Your Favourite Channels
➢
In the case of DTV mode, OK or Select can be used as the ENTER
(
) button.
You can edit your favourite channels using the colour buttons.
Before setting your favourite channels, run Auto Store first.
1
Press the D.MENU button.
The DTV menu is displayed.
Result:
2
Press the ▲ or ▼ button to select Channel.
The options available in the Channel group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Favourite Channels.
5
Press the ENTER (
) button.
Result:
The Favourite Channels menu is displayed.
6
Press the red button to display all currently stored channels.
7
Press the ▲ or ▼ button to select a channel you want.
Press the ENTER (
) button.
A “★” icon is shown next to the selected channel and
Result:
the channel will be added to the favourites list.
➢
➢
) button.
◆ To undo, press the ENTER (
) button again.
◆ Select All : Select all channels currently displayed.
◆ Select None : Deselect all selected channels.
◆ Preview : Displays (a) currently selected channel(s).
The Favourite Channels settings have been completed.
◆ Add
You can use this function when one or more favourite channels
have been selected.
1
Press the D.MENU button.
The DTV menu is displayed.
Result:
2
Press the ▲ or ▼ button to select Channel.
The options available in the Channel group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Favourite Channels.
5
Press the ENTER (
6
Press the red button in the Favourite Channels menu.
To add more channels, refer to the step 7 above.
➢
English - 26
◆
) button.
) button.
◆ To add all channels to the favourites channel list,
press the red button.
◆ To remove all channels, press the green button.
◆ Press the CH.LIST button to display the favourite
channel list.
◆
◆
☛
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 27
Editing Your Favourite Channels (continued)
◆ Move
1
Press the D.MENU button.
Result:
The DTV menu is displayed.
2
Press the ▲ or ▼ button to select Channel.
Result :
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Favourite Channels.
5
Press the ENTER (
6
Press the ▲ or ▼ button to select the required channel.
7
Press the green button.
Result :
A “ ” icon is displayed on the left side of the
channel name.
8
Press the ▲ or ▼ button to select the channel that you want to
move, then press the green or ENTER (
) button.
Result :
The channel is moved to its new position.
) button.
) button.
◆ Preview
1
In the Favourite Channels menu, select the channel to be
previewed by pressing the ▲ or ▼ button.
2
Press the yellow button.
Result :
Displays currently selected channel.
◆ Delete
☛
1
In the Favourite Channels menu, select the channel to be
deleted from the favourite channels list by pressing the ▲ or ▼
button.
2
Press the blue button.
Result :
The selected channel and number will be deleted.
➢ To add a deleted channel back into the favourite
channel list, see “Add” on page 26.
◆ To configure the settings so that pressing the P
or
button after setting up your favourite channels selects a
channel from among your favourite channels:
1 Press the CH.LIST button. The channel list is
displayed.
2 Press the yellow button. When the favourite channel
list is displayed, press the blue button to finish the
setting.
◆ To configure the settings so that pressing the P
or
button after setting up your favourite channels selects a
channel from among all channels:
1 Press the CH.LIST button. All stored favourite
channels are listed.
2 Press the yellow button. When the favourite channel
list is displayed, press the blue button to finish the
setting.
English - 27
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 28
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by a 4-digit PIN
(Personal Identification Number) code that is defined by the user.
The on-screen menu will instruct you to assign a PIN code (you can
change it later, if necessary).
1
Press the D.MENU button.
The DTV menu is displayed.
Result:
2
Press the ▲ or ▼ button to select Preference.
The options available in the Preference group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Parental Lock.
Press the ENTER (
) button.
The Enter PIN is displayed.
Result:
5
Enter your current 4-digit PIN code by using the numeric buttons
(0~9).
The options available in the Parental Lock group are
Result:
displayed with the Parental Rating selected.
➢
) button.
◆ The default PIN code for a new TV set is 0000.
◆ If you enter a invalid PIN code, the Invalid PIN
code. Please try again. message is displayed.
6
Press the ENTER (
7
Press the ▲ or ▼ button to select the age rating you want to lock
out. Press the ENTER (
) button.
8
If you want to change the PIN code, select Change PIN by
pressing the ▲ or ▼ button. Press the ENTER (
) button.
The Enter New PIN is displayed.
Result:
9
Enter your new PIN code by using the numeric buttons (0~9).
The Confirm New PIN is displayed.
Result:
10
Re-enter your new PIN code to confirm by using the numeric
buttons (0~9).
The Your PIN code has been changed
Result:
successfully message is displayed.
➢
English - 28
) button.
If you forget the PIN code, press the remote control
buttons in the following sequence, which resets the PIN
to 0-0-0-0 : POWER (Off), MUTE, 8, 2, 4, POWER (On)
T
b
re
dy
n
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 29
Viewing EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the
broadcasters. Programme entries may appear blank or out of date as
result of the information broadcast on a given channel. The display will
dynamically update as soon as new information becomes available.
◆ Now & Next Guide
For the six channels indicated in the left-hand column, displays
the Current programme and the Next programme information.
◆ Full Guide
Displays the programme information as time ordered one hour
segments. Tow hours of programme information is displayed
which may be scrolled forwards or backwards in time.
1
Press the D.MENU button.
Result:
The options available in the Guide group are displayed.
2
Press the ENTER (
3
Press the ▲ or ▼ button to select Now & Next Guide or Full
Guide. Press the ENTER (
) button.
Result:
The selected guide menu is displayed.
You can also display the guide menu simply by pressing the
GUIDE button.
) button.
➢
e
4
To
Then
◆ Select a programme by
pressing the ▲/▼/œ/√ button.
◆ Press the ENTER (
)
button.
If the next programme is selected, it is scheduled with the
clock icon displayed. If the ENTER (
) button is pressed
again, the scheduling is canceled with the clock icon gone.
For details about scheduling programmes, refer to the next
page.
Watch a programme
in the EPG list
.
➢
View programme information
◆ Select a programme of your
choice by pressing the
▲/▼/œ/√ button.
◆ Press the INFO ( ) button
when the programme of your
choice is highlighted.
Toggle between the Now &
Next Guide or Full Guide
◆ Press the red button
repeatedly.
Display the Favourites and
the All Channels list
◆ Press the green button
repeatedly.
-2 Hours
+2 Hours
◆ Press the yellow button.
◆ Press the blue button.
Exit the guide
◆ Press the EXIT (
➢
) button.
◆ Information such as the channel number, programme title
and running time, status bar, and brief summary of the
highlighted programme will be displayed in the top right
corner of the screen. If there is a lengthy summary, “…”
will be displayed. Press the INFO (
) button for the full
summary text.
◆ Six channels are displayed. To scroll between channels,
move to a channel using the ▲ or ▼ button. To display
page by page, use the P
or P
button.
English - 29
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 30
Using the Scheduled List
If you make a scheduled viewing list of programs you may like to
see, the channel will be automatically switched to the scheduled
program at the scheduled time even if you are watching another
program.
1
Press the D.MENU button.
Result:
2
Press the ENTER (
3
Press the ▲ or ▼ button to select Scheduled List.
Press the ENTER (
) button.
Result:
4
5
The menu for adding a programme is displayed with
Channel selected.
The Time is selected.
Enter the start and stop time of the programme by pressing the
▲, ▼ or numeric button.
Press the œ or √ button to move to the previous or next cell.
When you have finished, press the ENTER (
) button.
Result:
7
The selected guide menu is displayed.
Press the ▲ or ▼ button to select the required channel.
Press the ENTER (
) button.
Result:
6
) button.
Press the red button to add a new programme.
Result:
The Date is selected.
Press the ▲ or ▼ button to select the required date.
Press the ENTER (
) button.
Result:
English - 30
The options available in the Guide group are displayed.
The Frequency is selected.
d.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 31
Using the Scheduled List (continued)
8
Press the ▲ or ▼ button to select the required frequency (Once,
Daily, or Weekly). Press the ENTER (
) button.
9
When you are satisfied with your settings, save the adjusted
schedule by pressing the red button.
Result:
The scheduled list is displayed again.
10
If you want to edit the scheduled programme, select a programme
by pressing the ▲ or ▼ button. Press the green button.
If necessary, select the programme to be deleted by pressing the
▲ or ▼ button. Press the blue button.
11
Repeat step 4 to 9 for other programme to be added to the
scheduled list.
➢
➢
➢
When watching analog TV, the reserved DTV channel
cannot be changed. The channel is only changed
automatically to the reserved channel when you are
watching DTV.
The more simple and easy way for scheduling
programmes, refer to the step 4 on page 29.
Scheduling programme only functions with the television
already turned on, and not from standby mode.
For details about switching the television on and off
automatically, refer to page 68.
English - 31
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 32
Setting the Default Guide
You can preset the default guide style.
1
Press the D.MENU button.
Result:
2
Press the ENTER (
3
Press the ▲ or ▼ button to select Default Guide.
Press the ENTER (
) button.
Result:
English - 32
The options available in the Guide group are displayed.
) button.
The selected guide menu is displayed.
4
Select Now/Next or Full Guide by pressing the ▲ or ▼ button.
5
Press the ENTER (
) button.
In
c
d.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 33
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite
channels.
1
Press the D.MENU button.
Result:
The options available in the Guide group are displayed.
2
Press the ENTER (
3
Press the ▲ or ▼ button to select Now & Next Guide or Full
Guide. Press the ENTER (
) button.
Result:
) button.
The selected guide menu is displayed.
4
Press the green button repeatedly to toggle between the all and
favourite channels list.
5
Select a programme of your choice by pressing the ▲, ▼, œ, or √
button.
6
Press the INFO (
) button to display information about the
highlighted programme.
Result:
➢
7
The available programme information is displayed.
If you want to schedule selected programme or exit from the
information, select Remind or Return by pressing the
œ or √ button, then press the ENTER (
) button.
When the favourite channel list has not been set up:
◆ The favourites list is empty. Would you like to
choose your favourites now? message is displayed.
◆ Select Yes.
The Favourite Channels menu is displayed. If
Result:
you select No, all channels will remain unchanged.
◆ To edit the favourite channels, refer to page 26~27 for more
details.
➢
◆ All Channels is the list of channels that have been
scanned by the channel list update. All channels are
displayed in the all channel mode.
◆ Favourites (favourite channels) is the list of
channels that has been set in the Favourite
Channels menu (refer to page 26~27).
◆ When there is no channel information, the “No data”
message will be displayed and you will not be able to
change the channel even if you press the ENTER
button.
When the “No data” message appears and you
cannot change the channel, press the channel number
directly using the numeric buttons.
English - 33
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 34
Viewing Channel Lists
You can display a list of all channels or your favourite channels.
1
Press the D.MENU button.
Result :
2
Press the ▲ or ▼ button to select Channel.
Result :
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Channel List.
) button.
Press the ENTER (
Result :
➢
5
) button.
The channel list is displayed.
It can be displayed simply by pressing the CH.LIST button.
Press the yellow button to toggle between your favourite channels
or all channels.
Result :
Your favourite channels are only displayed if they were
previously set in the Favourite Channels menu
(refer to page 26~27 ).
6
Press the red or green button to display the previous or next
channel list page.
7
Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER (
) button.
Result :
8
English - 34
The DTV menu is displayed.
The channel number, name and an icon are displayed
in the top left corner while changing the channel.
The channel number and name are displayed if the
” icon if the
channel is one of the all channels, and a “
channel is one of the favourite channels.
Press the blue or CH.LIST button to exit from the channel list.
W
p
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 35
Displaying Programme Information
While viewing a channel, additional information about the current
programme may be displayed.
1
While viewing a programme, press the INFO (
) button.
Result : The programme information is displayed.
➢ The information displayed on the bottom left side shows:
- Parental Rating
- Video Type: SD, HD, Radio
- Audio Type: Stereo, Mono
- Existence of Teletext or DVB Subtitle
- Audio Language
2
To exit from banner information, press the INFO (
) button.
s
e
e
English - 35
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 36
Using Your Preferred Features
You can use various settings to suit your personal preferences.
◆ Activating/deactivating the Subtitle
Y
p
◆ Changing the default value for subtitle and audio
languages
◆ Activating/deactivating the Digital Text
1
Press the D.MENU button.
Result:
2
Press the ▲ or ▼ button to select Feature.
Result:
3
The DTV menu is displayed.
The options available in the Feature group are
displayed.
Press the ENTER (
) button.
◆ Subtitle
◆ Subtitle Language
◆ Audio Language
◆ Digital Text
4
Select your required menu by pressing the ▲ or ▼ button.
5
Press the ENTER (
Result:
6
) button.
The options of the selected menu available are
displayed.
Select the required option by pressing the ▲ or ▼ button, and
press the ENTER (
) button to change the setting.
◆
◆
◆
◆
Subtitle : On or Off
Subtitle Language : English
Audio Language : English
Digital Text : Disable or Enable
➢ If the programme is broadcast with digital text, this feature
is enabled.
➢ The language of the Subtitle Language
and the Audio
Language are selected according to the program on the
current channel.
English - 36
Y
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 37
Viewing Product Information
You can view your product information. For service or repair
please contact a Samsung authorized dealer.
1
Press the D.MENU button.
The DTV menu is displayed.
Result:
2
Press the ▲ or ▼ button to select System.
The options available in the System group are
Result:
displayed.
3
Press the ENTER (
) button.
The Product Information is selected.
Result:
4
Press the ENTER (
) button again.
The product information is displayed.
Result:
- Software Version
- Firmware Version
- Hardware Version
Checking the Signal Information
You can get information about the signal status.
1
Press the D.MENU button.
The DTV menu is displayed.
Result:
2
Press the ▲ or ▼ button to select System.
The options available in the System group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Signal Information.
Press the ENTER (
) button.
The technical information for signal status is displayed.
Result:
- Service : The current channel name.
- Service ID : The current channel number.
- Multiplex : The MUX name to which the current
channel belongs.
- Network : The broadcast type name within the
same area.
- Bit Error Level : A level of BER (Bit Error Rate)
from 0 to 10. The lowest
BER is level 0, while the
highest BER is level 10.
- Signal Strength : Signal strength.
e
) button.
English - 37
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 38
Upgrading the Software (Option)
To keep your product up-to-date with new Digital Television
features, software upgrades are periodically broadcast as part of
the normal Television signal. It will automatically detect these
signals and display the software upgrade banner. You are given the
option to install the upgrade.
◆ Upgrade Now
If you select Upgrade Now, the iDTV immediately installs
the new upgrade and then restarts.
◆ Upgrade Later
If you select Upgrade Later, the upgrade is postponed
until the next restart or channel change some 90 minutes
later, when the upgrade dialog appears again.
◆ Don’t Upgrade
If you select Don’t Upgrade, the iDTV does not perform
the upgrade and the software upgrade banner is not
displayed again. The upgrade is still stored internally, to
subsequently upgrade to the new version then the following
sequence of steps are performed.
1
Press the D.MENU button.
Result:
2
Press the ▲ or ▼ button to select System.
Result:
The options available in the System group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Software Upgrade.
Press the ENTER (
) button.
Result:
English - 38
The DTV menu is displayed.
) button.
The information for Software Upgrade menu is
displayed.
5
If necessary, press the ENTER (
software version information.
6
Press the D.MENU button to return to the Software Upgrade
menu.
7
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
) button again to display the
T
d
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 39
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
➢
e
1
Refer to “Connecting to the Common Interface” on page
76.
Press the D.MENU button.
Result:
2
The DTV menu is displayed.
Press the ▲ or ▼ button to select System.
Result:
The options available in the System group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Common Interface.
Press the ENTER (
) button.
Result:
5
) button.
The Application Info. is selected.
Press the ENTER (
application .
) button to display the information for your
English - 39
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 40
Selecting the CI Menu
This helps the user select an item from the CAM-supported menu.
1
Press the D.MENU button.
Result:
2
The DTV menu is displayed.
Press the ▲ or ▼ button to select System.
Result:
The options available in the System group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Common Interface.
Press the ENTER (
) button.
Result:
5
) button.
The technical information for signal status is displayed.
Press the ▲ or ▼ button to select CI Menu. Press the ENTER
(
) button.
Result:
6
Y
The options of the selected menu available are
displayed.
Select the required option by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
➢
➢
Select the CI Menu based on the menu PC Card.
In the case of DTV mode, OK or Select can be used as the
ENTER (
) button.
Y
si
v
English - 40
.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 41
Resetting
You can reset the values stored to the factory default values.
➢
1
The Reset operation deletes all channel information and
user preferences returning all values to their default
factory state.
Press the D.MENU button.
Result:
2
The DTV menu is displayed.
Press the ▲ or ▼ button to select System.
Result:
The options available in the System group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Reset. Press the ENTER
(
) button.
Result:
5
) button.
The Enter PIN is displayed.
Enter your current 4-digit PIN code by using the numeric buttons
(0~9).
Result:
The warning message is displayed. All values will be
reset by pressing the coloured buttons (red, green,
yellow, and blue) in turn.
e
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL” (
) button. To return to normal
viewing, press it again.
English - 41
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 42
Storing Channels Automatically
➢
Channel
TV
Not available in DTV or external input mode.
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
1
Press the MENU (
) button.
Result:
The main menu is displayed.
Return
2
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
) button.
Result:
The Auto Store is selected.
4
Press the ENTER (
) button again.
Result:
The options available in the Auto Store group are
displayed with Country selected.
5
Press the ENTER (
) button once again. Select your country
by pressing the ▲ or ▼ button.
The countries are displayed in the following order:
Belgium - Germany - Spain - France - Italy - Netherlands Switzerland - Sweden - United Kingdom - Eastern Europe Others.
If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 44).
▼ More
Move
Enter
Auto Store
TV
Country
:
Search
:
Move
Belgium
China
Germany
-/+ Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Enter
Return
Auto Store
TV
Country
:
Move
➢
√
Belgium
√
Search
Enter
Return
Search
6
Press the ENTER (
7
Press the ▲ or ▼ button to select Search.
Press the œ or √ button.
8
Press the ENTER (
) button to start the search.
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
To stop the search before it has finished, press the MENU
(
) button.
Start
Enter
➢
Return
Search
P 1
C--
-----
9
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 43.
◆ To exit from the channel store function without sorting the
channels, press the MENU (
) button repeatedly until the
menus disappear.
10
When the channels have been stored, you can:
◆ Sort them in the order required (see page 43)
◆ Assign a name to the stored channels (refer to page 47)
◆ Clear a channel (see page 46)
◆ Fine-tune channel reception if necessary (see page 49)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 50)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 59)
172MHz
Stop
Enter
Return
Sort
TV
From
: P 1
-----
To
: P--
-----
Store
:
?
Move
œ √ Adjust
English - 42
) button.
Return
➢
T
st
st
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 43
Sorting the Stored Channels
➢
Not available in DTV or external input mode.
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store.
d
1
2
Press the MENU (
) button.
The main menu is displayed.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button to select Sort. Press the ENTER (
button.
Result:
5
-
y
6
7
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Move
) button.
)
Return
Sort
From
: P 1
----
To
: P--
----
Store
:
?
The options available in the Sort group are displayed
with From selected.
Press the ▲ or ▼ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
Move
Press the ▲ or ▼ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the ENTER (
)
button.
Return
Sort
From
: P 1
----
To
: P 3
----
Store
:
?
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting the From by pressing the
▲ or ▼ button.
œ √ Adjust
TV
Move
8
Enter
TV
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Result:
Auto Store
▼ More
Press the ▲ or ▼ button to select Channel.
The options available in the Channel group are
Result:
displayed.
3
Channel
TV
œ √ Adjust
Return
Sort
TV
From
: P 3
----
To
: P 1
----
Store
:
OK
Move
Enter
)
English - 43
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 44
Storing Channels Manually
➢
Not available in DTV or external input mode.
You can store the channels, including those received via cable
networks.
Channel
TV
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
▼ More
Move
Enter
Return
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Manual Store
TV
2
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C --
Search
:
105MHz
Store
:
?
œ √ Adjust
Move
Return
Press the ▲ or ▼ button to select Channel.
Result:
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Manual Store.
Press the ENTER (
) button.
Result:
Manual Store
TV
Prog.
:
Colour System
:
Sound System
:
Channel
:
P 1
AUTO
Auto
PAL
BGSECAM
NT4.43
C 1
Search
:
105MHz
Store
:
?
Move
Enter
√
The options available in the Manual Store group are
displayed with Prog. selected.
To assign a programme number to a channel, find the correct
number by pressing the œ or √ button.
6
Press the ▲ or ▼ button to select Colour System.
Press the ENTER (
) button. Indicate the broadcasting
standard required by pressing the ▲ or ▼ button.
Return
:
P 1
Colour System
:
Sound System
:
Channel
:
Search
:
AUTO
BG BG
DK
C 1I
L
105MHz
Store
:
?
Enter
√
7
Press the ENTER (
8
Press the ▲ or ▼ button to select Sound System.
Press the ENTER (
) button. Select the sound standard
required by pressing the ▲ or ▼ button.
√
Result:
Return
9
English - 44
The colour standards are displayed in the following
order:
AUTO - PAL - SECAM - NT4.43
Manual Store
Prog.
Move
) button.
5
√
Result:
TV
The options available in the Channel group are
displayed.
) button.
The sound standards are displayed in the following
order:
BG - DK - I - L
Press the ENTER (
) button.
☛
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 45
Storing Channels Manually (continued)
10
If you know the number of the channel to be stored, see the
following steps.
Manual Store
TV
◆ Press the ▲ or ▼ button to select Channel.
Prog.
:
P 1
Colour System
:
AUTO
√
◆ Press the ENTER (
Sound System
:
BG
√
Channel
:
C --
Search
:
105MHz
Store
:
?
) button.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button.
œ √ Move
Adjust
TV
Manual Store
Return
◆ Press the ▲ or ▼ button to select the required number.
➢
re
11
If no sound or abnormal sound can be heard, re-select the
sound standard required.
If you do not know the channel numbers, select Search by
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Result:
12
13
☛
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
To store the channel and associated programme number, select
Store by pressing the ▲ or ▼ button. Press the ENTER (
)
button to select OK.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
P 1
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
?
Adjust
TV
Manual Store
Channel mode
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
:
Colour System
œ √ Move
Repeat Steps 10 to 12 for each channel to be stored.
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
Prog.
Return
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
?
œ √ Search
Move
Return
Manual Store
TV
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
OK
Move
Enter
English - 45
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 46
Skipping Unwanted Channels
➢
You can exclude the channels you have chosen from the channels
you scanned. When you scan through the stored channels, those
you have chosen to skip are not displayed.
Channel
TV
Not available in DTV or external input mode.
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
All of the channels that you do not specifically choose to skip are
displayed during scanning.
▼ More
1
Move
Enter
Return
Result:
2
Add/Delete
TV
:
Deleted
√
P 2
:
Deleted
√
P 3
:
Deleted
√
P 4
:
Deleted
√
P 5
:
Deleted
√
TV
4
Press the ▲ or ▼ button to select Add/Delete. Press the ENTER
(
) button.
Result:
:
P 2
:
Deleted
Deleted
Added
Deleted
P 3
:
Deleted
P 4
:
Deleted
P 5
:
Deleted
▼ More
Move
Enter
English - 46
Return
) button.
The Add/Delete menu is displayed with the current
channel selected.
5
Press the ▲ or ▼ button to delete or add the required channel.
Press the ENTER (
) button.
6
Select Deleted or Added by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
7
Repeat steps 5 to 6 for each channel to be erased or added.
▲ More
P 1
The options available in the Channel group are
displayed.
Press the ENTER (
Return
Add/Delete
The main menu is displayed.
3
▼ More
Enter
) button.
Press the ▲ or ▼ button to select Channel.
Result:
▲ More
P 1
Move
Press the MENU (
➢
C
in
y
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 47
Assigning Names to Channels
➢
Not available in DTV or external input mode.
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU (
Result:
2
4
5
6
7
The main menu is displayed.
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
▼ More
The options available in the Channel group are
displayed.
Press the ENTER (
Move
) button.
Press the ▲ or ▼ button to select Name. Press the ENTER (
button.
Result:
R
) button.
Auto Store
Press the ▲ or ▼ button to select Channel.
Result:
3
Channel
TV
▲ More
)
P 1
:
-----
P 2
:
-----
P 3
:
-----
P 4
:
-----
P 5
:
-----
▼ More
If necessary, select the channel to be assigned a new name by
pressing the ▲ or ▼ button. Press the ENTER (
) button.
Repeat steps 5 to 6 for each channel to be assigned to a new
name.
Return
Name
TV
The Name menu is displayed with the current channel
selected.
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9)
or a symbol (space, -). Move on the previous or next letter by
pressing the œ or √ button.
Enter
Move
Enter
Return
Name
TV
▲ More
P 1
:
A
P 2
:
-----
P 3
:
-----
P 4
:
-----
P 5
:
-----
▼ More
√ Move
Adjust
English - 47
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 48
Locking the Channel
➢
Channel
TV
▲ More
√
Child Lock
√
Fine Tune
LNA
:
Off
Not available in DTV or external input mode.
This feature allows you to lock the television so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. By keeping the remote control away
from unauthorised users, such as children, you can prevent them
from watching unsuitable programme.
√
1
Press the MENU (
Result:
Move
Enter
Press the ▲ or ▼ button to select Channel.
Result:
Child Lock
▲ More
P 1
:
Unlocked
√
P 2
:
Unlocked
√
P 3
:
Unlocked
√
P 4
:
Unlocked
√
P 5
:
Unlocked
√
Press the ENTER (
4
Press the ▲ or ▼ button to select Child Lock. Press the ENTER
(
) button.
Result:
Enter
The options available in the Channel group are
displayed.
3
▼ More
Move
The main menu is displayed.
Return
2
TV
) button.
Return
) button.
The Child Lock menu is displayed and the current
channel is shown as selected.
5
Press the ▲ or ▼ button to select the channel to be locked.
6
Press the ENTER (
) button. To lock the channel, select
Locked by pressing the ▲ or ▼ button (to unlock the channel,
select Unlocked). Press the ENTER (
) button.
Child Lock
TV
▲ More
P 1
:
P 2
:
Unlocked
Unlocked
Locked
Unlocked
P 3
:
Unlocked
P 4
:
Unlocked
P 5
:
Unlocked
▼ More
Move
Enter
English - 48
Return
➢
If
as
If
c
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 49
Fine Tuning Channel Reception
➢
Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
Channel
TV
▲ More
√
Child Lock
1
Press the MENU (
Result:
2
) button.
LNA
:
√
Off
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
√
Fine Tune
Move
Enter
Return
The options available in the Channel group are
displayed.
Fine Tune
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Fine Tune. Press the ENTER
(
) button.
) button.
P
2
1
Result:
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the setting.
Fine Tune
P
The programme number turns red, and the “
is displayed. (P 2
)
1
Reset
” symbol
Move
œ √ Adjust
✽
Result:
7
2
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
✽
6
Save
Return
✽
5
Move
œ √ Adjust
The horizontal bar is displayed.
To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼
button then press the ENTER (
) button.
Save
Return
Fine Tune
P
2
✽
R
Reset
1
Reset
Move
Enter
Return
Fine Tune
P 2
0
Reset
Move
Enter
Return
English - 49
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 50
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
Channel
TV
▲ More
√
Child Lock
√
Fine Tune
LNA
:
Off
√
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information
automatically.
1
Move
Enter
Result:
Return
2
Channel
TV
Press the MENU (
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
▲ More
) button.
The options available in the Channel group are
displayed.
Child Lock
Fine Tune
LNA
Move
:
Enter
English - 50
Off
On
Return
3
Press the ENTER (
4
Press the ▲ or ▼ button to select LNA. Press the ENTER (
button.
5
Select Off or On by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
) button.
)
Y
v
ut
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 51
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
TV
1
Press the MENU (
Result:
2
The main menu is displayed.
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
Press the ▲ or ▼ button to select Picture.
Result:
3
) button.
Mode
The options available in the Picture group are
displayed.
Press the ENTER (
Move
Enter
) button.
Mode
TV
Result:
4
Result:
5
) button again.
The options available in the Mode group are displayed
with Mode selected.
Press the ENTER (
) button.
Select the required option by pressing the ▲ or ▼ button.
Result:
6
The Mode is selected.
Press the ENTER (
Return
Mode
:
Contrast
:
Brightness
:
Dynamic
Off
Standard
Movie
100
Custom
45
Sharpness
:
75
Colour
:
55
▼ More
Move
Enter
The following modes are available:
Dynamic - Standard - Movie - Custom
Press the ENTER (
) button.
English - 51
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 52
Customizing the Picture Settings
Your television has several setting options that allow you to control
the picture quality.
Picture
TV
Mode
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
1
Result:
2
Move
Enter
Press the MENU (
3
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Return
) button.
The options available in the Picture group are
displayed.
Press the ENTER (
) button.
Mode
TV
Mode
:
Contrast
:
Brightness
:
Dynamic
Off
Standard
Movie
100
Custom
45
Sharpness
:
75
Colour
:
55
Result:
4
Enter
Press the ENTER (
Result:
▼ More
Move
Return
5
The Mode is selected.
) button again.
The options available in the Mode group are displayed
with Mode selected.
Press the ENTER (
) button.
Select the required option by pressing the ▲ or ▼ button.
Result:
Contrast
The following modes are available:
Dynamic - Standard - Movie - Custom
100
Move
œ √ Adjust
6
Press the ENTER (
7
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Colour, or Tint-NTSC only) to be
adjusted. Press the ENTER (
) button.
Result:
➢
English - 52
) button.
The horizontal bar is displayed. Press the œ or √
button until you reach the optimal setting.
To select other options, press the ▲ or ▼ button.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 53
Customizing the Picture Settings (continued)
l
Mode
TV
8
▲ More
Press the MENU (
Result:
) button.
Colour Tone
The main menu is displayed again.
9
Press the ▲ or ▼ button to select Colour Tone.
Press the ENTER (
) button.
10
Select the required colour tone (Warm 1 ~ Warm 10, Normal, Cool
1 ~ Cool 10) by pressing the œ or √ button.
11
Press the MENU (
12
To return to the factory defaults, select Reset by pressing the
▲ or ▼ button. Press the ENTER (
) button.
The reset function is set for each mode (Dynamic, Standard,
Movie, or Custom).
Move
Result:
) button to return to the previous menu.
The previously adjusted settings will be reset to the
factory defaults.
:
Normal
√
Reset
Enter
Return
Colour Tone
Normal
œ √ Adjust
Return
Mode
TV
▲ More
Colour Tone
:
Normal
√
Reset
Move
Enter
English - 53
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 54
Selecting the Picture Size (Wide Model : Analog Mode)
You can select the picture size which best corresponds to your
viewing requirements.
Picture
TV
Mode
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
1
Press the MENU (
Result :
2
Enter
Return
Auto Wide
16:9
Panorama
Zoom1
Zoom2
4:3
Cinema1
Cinema2
Move
Press the ENTER (
4
Press the ▲ or ▼ button to select Size. Press the ENTER (
button.
Result :
5
Enter
Return
The options available in the Picture group are
displayed.
3
Size
TV
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result :
Move
) button.
) button.
)
The Size menu is displayed.
Select the required mode by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result :
The following modes are available:
Auto Wide Automatically enlarges the image to fit the 16:9
aspect ratio providing the optimum display.
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
Panorama
Adjusts a Wide picture to appear natural.
Zoom1
Vertically enlarges the picture approximately 130%.
Zoom2
Vertically enlarges the picture about approximately
150%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Cinema1
To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
Cinema2
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
◆ Lifting is available in the Zoom1 or Zoom2 mode by
pressing the ▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in Zoom1, Zoom2, Cinema1, and Cinema2 modes.
➢
English - 54
You can select these options by simply pressing the
P.SIZE button on the remote control.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 55
Selecting the Picture Size (Wide Model : Analog Mode) (continued)
4:3 Signal
Auto Wide
Auto Wide
Zoom2
Zoom2
16:9
16:9
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
16:9 Signal
Auto Wide
16:9
Auto Wide
16:9
Zoom2
Zoom2
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
n)
English - 55
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 56
Selecting the Picture Size (Wide Model : DTV Mode)
You can select the picture size which best corresponds to your
viewing requirements.
Picture
TV
Mode
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
1
Press the MENU (
Result :
2
Enter
Return
Auto Wide
16:9
Panorama
14:9
Zoom
4:3
Move
Press the ENTER (
4
Press the ▲ or ▼ button to select Size. Press the ENTER (
button.
Result :
5
Enter
Return
The options available in the Picture group are
displayed.
3
Size
TV
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result :
Move
) button.
) button.
)
The Size menu is displayed.
Select the required mode by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result :
The following modes are available:
Auto Wide Automatically enlarges the image to fit the 16:9
aspect ratio providing the optimum display.
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
Panorama
Adjusts a Wide picture to appear natural.
14:9
Adjusts the picture to fit into the 14:9 wide aspect
ratio.
Zoom
Vertically enlarges the picture approximately 130%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
➢
◆ Lifting is available in the Zoom mode by pressing the ▲ or
▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in Zoom modes.
➢
English - 56
You can select these options by simply pressing the
P.SIZE button on the remote control.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 57
Selecting the Picture Size (Wide Model : DTV Mode) (continued)
4:3 Signal
Auto Wide
16:9
Auto Wide
16:9
Zoom
4:3
Zoom
4:3
Panorama
Panorama
14:9
14:9
16:9 Signal
Auto Wide
16:9
Auto Wide
16:9
Zoom
4:3
Zoom
4:3
Panorama
Panorama
14:9
14:9
or
English - 57
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 58
Selecting the Scan Mode
Picture
TV
Mode
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
You will normally find that scan mode is best set to Natural to
reduce any slight picture flicker. However, it is possible that some
occasional broadcasts (NTSC-M) may benefit by changing the scan
mode. Natural, Digital, and Progressive modes are available.
1
Press the MENU (
Result:
Move
Enter
Return
2
Press the ▲ or ▼ button to select Picture.
Result:
Picture
TV
) button.
The main menu is displayed.
The options available in the Picture group are
displayed.
Mode
:
Dynamic
3
Press the ENTER (
Size
:
Auto Wide
Auto
Auto
Natural
Off
Digital
Progressive
4
Press the ▲ or ▼ button to select Scan Mode. Press the ENTER
(
) button.
5
Select the required option by pressing the ▲ or ▼ button.
Scan Mode
:
Digital NR
:
Move
Enter
Result:
Return
) button.
The following modes are available:
◆ Auto
: This offers you a wide range of DVD software experiences
without hindering you about the broadcasting system or
picture quality. This mode identifies the characteristics of
incoming signals and reproduces the optimum picture
quality suited to the connected multimedia device such as
DVDs, or digital devices, automatically switching to the
appropriate display mode.
◆ Natural
: Natural Scan uses each image in digital memory to estimate
motion and create new frames which are inserted where the
repeated field is in 100Hz. Natural Scan is especially good
when watching TV soap dramas or movies because it yield
stable pictures with no flicker-it brings naturally clear images
and fine detail.
◆ Digital
: Unlike analog processing in conventional TVs that display
50 fields per second, Digital scan doubles that rate to 100
through digital processing by writing each field twice in the
same amount of time. This scan is an especially good when
you are watching fast-paced sports or action-packed movies
because it is much more efficient in doubling the resolution
for quick motion.
◆ Progressive
: A progressive scan delivers twice as many lines as a
conventional(interlaced scan) TV per second. The result is
an incredibly stable, smooth picture that's easy on the eyes.
Progressive scan is major advantage when displaying a
wealth of text information and is the choice for NTSC DVD
playback.
➢
6
English - 58
In Auto, Digital and Progressive mode, shaking of the
picture and/or the OSD Menu may occour. This is normal,
not a defect of your set.
Press the ENTER (
) button.
If
th
o
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 59
Setting the Digital NR (Digital Noise Reduction)
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
1
Press the MENU (
Result:
2
4
5
) button.
Mode
:
Dynamic
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
3
Picture
TV
Move
The options available in the Picture group are
displayed.
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Digital NR. Press the ENTER
(
) button.
Enter
Return
Picture
TV
Mode
:
Dynamic
Size
:
Auto Wide
Scan Mode
:
Auto
Digital NR
:
Off
Off
On
Select Off or On by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Move
Enter
e
e
s
n
s
.
English - 59
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 60
Setting the Blue Screen
➢
Not available in DTV mode.
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
Setup
TV
Time
√
Plug & Play
√
Language
:
English
:
Off
√
Self Focus
Blue Screen
√
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
√
1
▼ More
Move
Result:
Enter
) button.
The main menu is displayed.
Return
2
Press the ▲ or ▼ button to select Setup.
Result:
Setup
TV
Press the MENU (
Time
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Blue Screen.
Press the ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
) button.
Plug & Play
Language
:
English
:
Off
Off
On
Self Focus
Blue Screen
▼ More
Move
Enter
English - 60
Return
Y
w
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 61
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Mode
Auto Volume
:
Dolby Virtual
2
:
The options available in the Sound group are displayed.
Move
Press the ENTER (
Result:
The Mode is selected.
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
Enter
) button.
4
) button again.
The following modes are available:
Standard - Music - Movie - Speech - Custom.
6
Off
Press the ▲ or ▼ button to select Sound.
Result:
3
Standard
Off
Music
Movie
Speech
Normal
Custom
:
Equalizer
Press the ENTER (
) button.
English - 61
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 62
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
Mode
:
√
Custom
1
Auto Volume
:
Off
√
Dolby Virtual
:
Off
√
Press the MENU (
Result:
√
Equalizer
2
Press the ▲ or ▼ button to select Sound.
Result:
Move
Enter
TV
Return
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Equalizer. Press the ENTER
(
) button.
) button.
Equalizer
Result:
R
5
L
100 300 1K
√ Move
) button.
The main menu is displayed.
Adjust
English - 62
3K
The options available in the Equalizer group are
displayed.
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
10K
Return
➢
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 63
Extra Sound Settings
◆ Auto Volume
.
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically adjust
the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
Sound
TV
Mode
:
◆ Dolby Virtual
√
√
Auto Volume
:
Off
√
Dolby Virtual
:
Off
√
Move
This feature converts a monaural sound signal into two
identical left and right channels. Once the Dolby Virtual
is set to Off or On, the setting applies to the sound effects
such as Standard, Music, Movie, and Speech.
Custom
Equalizer
Enter
Return
Sound
TV
Mode
:
Custom
Equalizer
1
Press the MENU (
Result:
2
) button.
:
Off
Normal
On
Off
Move
Enter
Return
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Select the required option (Auto Volume or Dolby Virtual) by
pressing the ▲ or ▼ button.
) button.
5
Press the ENTER (
6
To activate each feature, select On by pressing the ▲ or ▼
button. Press the ENTER (
) button.
➢
:
Dolby Virtual
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
Auto Volume
Sound
TV
Mode
:
Custom
Equalizer
Auto Volume
:
Off
Dolby Virtual
:
Off
Off
On
) button.
Move
Enter
◆ You can also set these options simply by pressing the
SURROUND ( ) button.
◆ Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol
are trademarks
of Dolby Laboratories.
Dolby Virtual : Off
English - 63
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 64
Setting the Melody Sound
You can hear clear melody sound when the television is powered
on or off.
Setup
TV
▲ More
Melody
:
On
√
1
√
AV Setup
Result:
2
Move
Enter
:
Off
On
On
AV Setup
Move
Enter
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Melody. Press the ENTER
(
) button.
5
Select Off or On by pressing the ▲ or ▼ button.
6
Press the ENTER (
▲ More
Melody
) button.
Press the ▲ or ▼ button to select Setup.
Result:
Return
Setup
TV
Press the MENU (
T
o
a
th
) button.
) button.
Return
➢
➢
English - 64
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 65
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM ↔ Mono
Mono
(Normal)
NICAM Stereo
NICAM ↔ Mono
Stereo
(Normal)
NICAM Dual I/II
NICAM → NICAM → Mono
Dual I
Dual II (Normal)
→
NICAM
Stereo
→
Type of broadcast
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual I/II
Dual I ↔ Dual II
Stereo
➢
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to Mono.
DTV mode
When press the
DUAL I-II button
After changing channels
(Default Mode)
On-screen
indication
Mono
Mono
Mono
Mono
Stereo
Stereo ↔ Mono
Stereo
Stereo
Dual Mono
Dual I → Dual II
Dual
Dual I
Dual I
→
➢
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side depending on the model). If the mono sound comes
out of the left speaker, press the DUAL I-II button.
English - 65
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 66
Setting and Displaying the Current Time
Setup
TV
√
Time
You can set the television clock so that the current time is displayed
by pressing the “INFO (
)” button. You must also set the time if
you wish to use the automatic on or off timers.
➢
√
Plug & Play
Language
:
English
√
√
Self Focus
Blue Screen
:
√
Off
▼ More
1
Move
Enter
When pressing the “ I ” button (On/Off) on the panel of
the television, the clock setting will be reset.
Press the MENU (
Result:
2
Time
TV
Clock
:
-- : --
√
Sleep Timer
:
Off
√
On Timer
:
Inactivated
√
Off Timer
:
Inactivated
√
Move
Enter
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time. Press the ENTER (
button.
Result:
Return
) button.
)
The options available in the Time group are displayed
with Clock selected.
5
Press the ENTER (
6
Press the œ or √ button to move to the Hour or Minute.
Set these by pressing the ▲ or ▼ button.
) button.
Clock
TV
√ Move
) button.
Return
Hour
Minute
11
00
Adjust
English - 66
➢
Return
You can also set the Hour and Min by pressing the numeric
buttons directly.
Y
w
c
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 67
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
Setup
TV
√
Time
√
Plug & Play
1
Press the MENU (
Result:
) button.
Language
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button to select Time. Press the ENTER (
button.
√
Move
Enter
Return
) button.
)
The options available in the Time group are displayed.
5
Press the ▲ or ▼ button to select Sleep Timer.
Press the ENTER (
) button.
6
Select the preset time interval (Off, 30 Minute, 60 Minute,
90 Minute, 120 Minute, 150 Minute, 180 Minute) for staying
on by pressing the ▲ or ▼ button. Press the ENTER (
) button.
Time
Clock
:
11 : 35
√
Sleep Timer
:
Off
√
On Timer
:
Inactivated
√
Off Timer
:
Inactivated
√
Move
➢
Off
√
TV
Result:
:
√
▼ More
The options available in the Setup group are displayed.
3
English
Self Focus
Blue Screen
2
:
◆ You can also set these options simply by pressing the
SLEEP ( ) button.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
Enter
Return
Time
TV
√
Clock
:
11 : 35
Sleep Timer
:
Off Off
30 Minute
Minute
-- 60
: -90 Minute
Minute
--120
: -150 Minute
180 Minute
On Timer
:
Off Timer
:
Move
Enter
Off
English - 67
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 68
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will switched
on/off automatically at the time you select.
➢
Setup
TV
Time
√
Plug & Play
√
Language
:
English
:
Off
√
√
Self Focus
Blue Screen
√
▼ More
Move
Enter
1
Press the MENU (
) button.
The main menu is displayed.
Result:
2
Press the ▲ or ▼ button to select Setup.
Result : The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time. Press the ENTER (
)
button.
Result : The options available in the Time group are displayed.
5
Press the ▲ or ▼ button to select On Timer. Press the ENTER
(
) button.
Result : The options available in the On Timer group are
displayed.
6
Select the Hour, Minute, Prog. (programme number), or Volume.
Press the œ or √ button to set these by pressing the ▲ or ▼
button.
You can also set the Hour and Min by pressing the numeric
buttons directly.
Return
Time
TV
Clock
:
11 : 35
√
Sleep Timer
:
30 Minute
√
On Timer
:
Inactivated
√
Off Timer
:
Inactivated
√
Move
Enter
Return
On Timer
TV
Hour
Minute
06
30
Prog.
Volume
P 1
10
Yes
Adjust
) button.
➢
Activation
œ √ Move
The first step is to set the television’s clock (refer to “Setting
and Displaying the Current Time” on page 66). If you have
not yet set the clock, the message Set the clock first
is displayed.
Return
7
To activate the On Timer with the settings satisfied, select
Activation to by pressing the œ or √ button,then select Yes by
pressing the ▲ or ▼ button.
8
Press the MENU (
) button.
Result : The options available in the Time group are displayed
again.
9
Press the ▲ or ▼ button to select Off Timer. Press the ENTER
(
) button.
Result : The Off Timer menu is displayed.
10
Set the Off Timer as methods for On Timer setting.
Time
TV
Clock
:
11 : 35
√
Sleep Timer
:
30 Minute
√
On Timer
:
06 : 30
√
Off Timer
:
Inactivated
√
Move
Enter
Return
➢
Off Timer
TV
Hour
Minute
23
30
Activation
Yes
œ √ Move
Adjust
English - 68
Return
➢
Auto Power Off
When you set the timer “On”, the television will eventually
turn off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating or leakages,
which may occur if a TV is on for too long (on holiday, for
example).
When the on/off timer is set, and the TV is turned off while
watching a digital TV channel (or an analog TV channel),
then the TV will automatically be turned on and display the
digital TV channel (or the analog TV channel).
U
c
so
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 69
Viewing an External Signal Source
g
e
t
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
Input
TV
Source List
:
√
TV
√
Edit Name
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Input.
2
Result:
3
Move
The options available in the Input group are
displayed.
Press the ENTER (
) button.
Enter
Return
Source List
TV
TV
Result:
4
Press the ENTER (
) button again.
DTV
: ------
Ext.1
: ------
Ext.2
: ------
Ext.3
: ------
Press the ▲ or ▼ button to select signal source, then press the
ENTER (
) button.
5
➢
.
c
The Source List is selected.
6
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext.1, Ext.2,
Ext.3, or Component on the TV’s rear panel, and AV or
S-Video on the TV’s side panel.
◆ You can select these options simply by pressing the
SOURCE (
) button.
Press the MENU (
Result:
▼ More
Move
Result:
Source List
Move
√
Enter
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER (
) button.
The device names available are listed.
Result:
VCR - DVD - Cable STB - HD STB - Sat. STB AV Receiver - DVD Receiver - Game Camcorder - DVD Combo - DHR (DVD HDD
Recorder) - PC.
Edit Name
√
S-Video
: -- ----- - ---VCR
: - - - -DVD
---Cable STB
: - - -HD
- -STB
--Sat. STB
: -AV
- - Receiver
----▼
: --------
Component
: --------
√
Ext.1
Ext.2
AV
Move
Enter
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
➢
➢
Return
The options available in the Input group are
displayed again.
Ext.3
10
√
TV
The main menu is displayed.
TV
9
:
Edit Name
) button.
Press the ▲ or ▼ button to select Edit Name.
Press the ENTER (
) button.
8
Return
Input
TV
Press the ▲ or ▼ button to select Input.
7
Enter
If you change the external source while viewing, it might
take a short period of time for pictures to be switched.
To watch television programme again, press the TV/DTV
button and select the channel number required.
English - 69
√
√
√
√
Return
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 70
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
Y
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
➢
It can be different from depending on TTX source.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English - 70
T
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 71
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1
Select the channel providing the Teletext service using the P
or
button.
2
Press the TEXT/MIX (
) button to activate the teletext
mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the TEXT/MIX (
) button again.
4
Press the TV/DTV button to exit from the teletext display.
s
English - 71
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 72
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
English - 72
Press the...
To return to the normal display after using the reveal or
size feature, press the TV/DTV button.
Y
b
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 73
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
The current page counter is increased by one and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are colour-coded
and can be selected by pressing the coloured buttons on the
remote control.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the Red or Green button.
5
When you have finished, press the TV/DTV button to return to
your normal broadcast.
English - 73
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 74
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
☛
English - 74
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 75
Connecting to the External Input/Outputs
➢
EXT 1 is used for the equipment with an RGB output, such as video game devices or video disc
players.
Rear of the TV
VCR
①
②
or
DVD
③
or
Decoder /
Video game device
① This end can be fitted with:
Video disc player
② If you have a second VCR and wish to copy cassette tape, connect the
Satellite receiver
◆ A SCART connector
◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
source VCR to EXT 1 and the target VCR to EXT 2 so that you can redirect
the signal from EXT 1 to EXT 2.
➃
③ If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃ When you wish to record a programme, connect the receiver to EXT 1 and
the VCR to EXT 2 so that you can redirect the signal from EXT 1 to EXT 2.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 75
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 76
Connecting to the Common Interface
➢
① COMMON INTERFACE
Rear of the TV
PCMCIA Slot supports the DVB Common Interface
(DVB-CI) standard. This connection is provided for
future expansion of your Samsung DTV set
allowing the installation of DVB-CI compatible
peripherals, for example a DVB-CI module to
support pay TV services. The availability of DVB-CI
peripherals varies country by country.
Please contact your retailer for information about the
availability of DVB-CI peripherals in your region.
➢ The Common Interface in the menu is active (white
characters) when the CI-card is properly inserted.
It is inactive when the card is improperly inserted.
Please insert the
card as shown.
② Inserting the CI (Common Interface) card
If you want to watch the scrambled channel, insert
the CI card into the COMMON INTERFACE slot.
Connecting to the Audio Output
➢
➢
Please be sure to match the colour coded input terminals and cable
jacks.
The RCA (AUDIO-L and R) connectors are used for equipment, such as an audio system
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
English - 76
➢
e
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 77
Connecting to the RCA Input
➢
Please be sure to match the colour coded input terminals and cable
jacks.
➢
The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders,
video disc players, and some video game devices.
Side of the TV
(depending on the model)
Camcorder
Video game device
Video disc player
➢
When both the side AV and rear connectors are connected
to external equipment, the side AV receives priority.
English - 77
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 78
Connecting to the S-Video Input
➢
➢
Please be sure to match the colour coded input terminals and cable
jacks.
The S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO-L and R) connectors are used for equipment
with an S-Video output, such as a camcorder or VCR.
Side of the TV
(depending on the model)
①
Camcorder
and
VCR
① To play pictures and sound, both the S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO-L and R)
connectors must be used.
English - 78
➢
e
BP68-00491B_01(J60C_UK)
2006/03/15
03:20 PM
Page 79
Connecting to the Component Input
➢
Please be sure to match the colour coded input terminals and cable
jacks.
Rear of the TV
DVD
DTV receiver
➢
The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
Available format for Component inputs; 480i, 480p, 576i, 576p, 1080i - 50Hz.
English - 79
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 80
Redirecting an Input to the External Output
Your television enables you to choose which audio/video signals
are output to the external connector.
Setup
TV
▲ More
Melody
:
√
On
1
√
AV Setup
Result:
2
Move
Enter
√
TV
Ext.2
√
Monitor Out
Ext.3
:
TV
Ext.1
Enter
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select AV Setup.
Press the ENTER (
) button.
Result:
√
5
Move
) button.
Press the ▲ or ▼ button to select Setup.
Result:
Return
AV Setup
TV
Press the MENU (
The AV Setup menu is displayed with the Ext.3 is
selected.
Press the ENTER (
) button. Select the source to be directed to
the output of Ext.3 by pressing the ▲ or ▼ button.
➢
Return
) button.
Ext.1 : Default (TV)
Ext.2 : Default (Monitor Out)
Ext.3 : Variable (TV, Ext.1, Ext.2, or AV)
AV Setup
TV
6
Ext.1
√
TV
Ext.2
√
Monitor Out
Ext.3
:
TV
TV
Ext.1
Ext.2
AV
Move
Enter
English - 80
Return
Press the ENTER (
) button.
Y
In
a
V
Sa
o
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 81
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control.
In addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than
Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the MODE button to switch the remote control to the VCR
(CABLE or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE, and DVD
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
Once your remote control is set up, press the MODE button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the STB, VCR, CABLE,
and DVD mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forward) still operate your VCR or DVD.
English - 81
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 82
Programming the Remote Control for Other Components
VCR Remote Control Codes
B
If
te
N
N
N
S
B
d
R
Cable Box (CATV) Remote Control Codes
DVD Remote Control Codes
English - 82
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 83
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact the help desk at 0870-242-0303 or dttvsupport@seri.co.uk.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ I ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
) button on the remote control
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often occurs to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
English - 83
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 84
This page is intentionally
left blank.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 85
This page is intentionally
left blank.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 86
This page is intentionally
left blank.
BP68-00491B(J60C_UK)
12/2/05
10:56 AM
Page 87
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
BP68-00491B_01(J60C_UK)
2006/03/15
03:21 PM
Page 88
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SLOVAKIA
SPAIN
SWEDEN
U.K
UKRAINE
Customer Care Centre
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0,10/Min)
231 627 22
0 801 801 881
80 8 200 128
8-800-200-0400
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-502-0000
Web Site
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.ru
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ur
AA68-00491B-01
Download PDF