Samsung | SCH-X619 | Samsung SCH-X619 User Manual

* Some of the contents of this manual may differ from your
phone, depending on the software installed or your service
provider.
PORTABLE CELLULAR
TELEPHONE
SCH-X619
User’s Manual
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No. : GH68-05412A
English. 08/2004. Rev.1.0
Table of contents
Important safety precautions ................................................ 7
Unpacking ................................................................................ 9
Your phone
Phone’s parts ..............................................................................
Display .......................................................................................
Backlight ....................................................................................
Service LED .................................................................................
Camera .......................................................................................
10
13
15
16
16
Getting started
Using a UIM card ........................................................................
Using a battery ...........................................................................
Switching the phone on or off .....................................................
Using the PIN code ......................................................................
Using the soft keys .....................................................................
Your phone’s modes ....................................................................
17
18
24
25
26
27
Call functions
Making a call ..............................................................................
Ending a call ...............................................................................
Emergency dialling ......................................................................
Using the recent call logs .............................................................
Making a call from phonebook ....................................................
Prepend dialling ..........................................................................
Speed-dialling .............................................................................
Pause dialling ..............................................................................
Adjusting the volume during a call ...............................................
Answering a call ..........................................................................
Silencing a call ringer ..................................................................
Rejecting a call ............................................................................
Viewing missed calls ....................................................................
Options during a call ...................................................................
30
31
31
32
32
33
34
36
38
39
40
40
41
41
3
Call functions
Messages
(continued)
Call forwarding ........................................................................... 42
Call waiting ................................................................................. 43
Three-way calling ........................................................................ 44
Entering text
Changing the text input mode ......................................................
Using T9 word mode ....................................................................
Using ABC mode ..........................................................................
Using 123 mode ..........................................................................
Using symbol mode .....................................................................
46
47
49
52
52
Using the menus
Accessing a menu function by scrolling ......................................... 53
Using shortcuts ............................................................................ 54
List of menu functions ................................................................. 55
Calls
Missed (Menu 1-1) ...................................................................
Incoming (Menu 1-2) ...............................................................
Outgoing (Menu 1-3) ...............................................................
Erase logs (Menu 1-4) ..............................................................
Air time (Menu 1-5) .................................................................
Call forward (Menu 1-6) ..........................................................
Call waiting (Menu 1-7) ...........................................................
4
78
79
81
82
82
Scheduler
View month (Menu 4-1) ...........................................................
Jump to date (Menu 4-2) ........................................................
Alarm set (Menu 4-3) ..............................................................
Calculator (Menu 4-4) ..............................................................
Today (Menu 4-5) ....................................................................
To do list (Menu 4-6) ...............................................................
Memo pad (Menu 4-7) ............................................................
Countdown (Menu 4-8) ............................................................
World time (Menu 4-9) ............................................................
85
88
88
89
90
91
92
93
94
Entertainment
60
61
62
62
63
64
65
Music box (Menu 5-1)............................................................... 95
Image box (Menu 5-2) ............................................................. 96
Games (Menu 5-3) ................................................................... 98
MP3 player (Menu 5-4) .......................................................... 100
Memory status (Menu 5-5) ..................................................... 103
66
70
76
76
Sounds (Menu 6-1) ................................................................
Display (Menu 6-2) ................................................................
Auto retry (Menu 6-3) ...........................................................
Answer mode (Menu 6-4) ......................................................
Roam option (Menu 6-5) .......................................................
Security (Menu 6-6) ..............................................................
Entry method (Menu 6-7) ......................................................
Phonebook
Find (Menu 2-1) ......................................................................
Add (Menu 2-2) .......................................................................
Group set (Menu 2-3) ..............................................................
My phone # (Menu 2-4) ...........................................................
New message (Menu 3-1) ........................................................
Inbox (Menu 3-2) ....................................................................
Outbox (Menu 3-3) .................................................................
Erase msgs (Menu 3-4) ............................................................
Msg setup (Menu 3-5) .............................................................
Settings
104
108
112
112
113
114
120
5
Camera
Taking a photo ..........................................................................
Take photo (Menu 7-1) ..........................................................
Record video (Menu 7-2) .......................................................
Photo album (Menu 7-3) ........................................................
Video album (Menu 7-4) ........................................................
Settings (Menu 7-5) ..............................................................
Memory status (Menu 7-6) ....................................................
121
125
125
128
129
131
131
Wireless web
About the Web browser ............................................................. 132
Health and safety information
SAR certification information .....................................................
Precautions when using batteries ...............................................
Road safety ..............................................................................
Operating environment .............................................................
Electronic devices ......................................................................
Potentially explosive environments ...........................................
Emergency calls ........................................................................
Other important safety information ...........................................
Care and maintenance ..............................................................
137
138
140
140
141
143
144
145
146
Glossary ..................................................................... 148
Quick reference card .................................................. 151
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching off near all medical equipment
Switch off your phone near the medical equipment.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
6
Water resistance
Your phone is not water-resistance. Keep it dry.
7
Important safety precautions
Unpacking
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press the
key. Give all the
necessary information as accurately as possible. Do
not cut off the call until given permission to do so.
Your package contains the following items. The
illustrations below may look different from your
phone and accessories.
Phone
Travel adapter
Keeping small children away from your phone
Keep the phone and all its parts including
accessories out of the reach of small childern.
Accessories and batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Qualified service
Only qualified service personnel may install or repair
your phone.
Batteries
Straight headset
Battery charger
Finger strap
For more detailed safety information, see “Health
and safety information” on page 137.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
8
Data cable
User’s manual
9
Your phone
Your phone
With the phone closed
Phone’s parts
Antenna
The following illustrations show the main elements
of your phone:
Camera
External display
With the phone open
Stereo speaker
Ear-microphone jack
Camera key
Service LED
Earpiece
Key(s)
Folder
Display
(Soft keys)
(Navigation
keys)
Stereo speaker
Volume keys:
During a call, adjust
the voice volume.
In Standby mode,
adjusts the key
tones volume.
10
Functions
Performs the functions indicated by the
text above them, on the bottom line of the
display.
In Menu mode, scrolls through the menus.
In Standby mode, enters the following
menus respectively:
• Up: MP3 player. This key accesses the
MP3 file list when pressed and held.
• Down: Games
• Left: Messages
• Right: View month
Enters the Wireless Web menu.
Also, quickly launches the web browser
when held down.
Microphone
Makes or answers a call.
In Standby mode, retrieves the last
numbers you dialled or received.
11
Your phone
Your phone
Display
Key(s)
Functions (continued)
Ends a call. Also switches the phone on
and off when pressed and held.
In Menu mode, cancels your input and
returns to Standby mode.
The display has three areas:
Icons
~
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Enters numbers, letters and some special
characters.
In Standby mode, allows you to change the
voice calls when pressed and held.
In the text entry mode, changes the case of
letters.
In Standby mode, quickly enters or exits
silent mode when pressed and held.
In the text entry mode, inserts a space.
(on the left side of the phone)
During a call, adjust the earpiece volume.
In Standby mode, adjust the keypad tone
volume.
During playback of an MP3 music file,
adjust the sound.
(on the right side of the phone)
In Standby mode, enters the Camera menu
In Standby mode, turns on the camera when
pressed and held. To take a photo with the
folder closed, press and hold this key.
During playback of an MP3 music file,
pauses or resumes the playback.
12
Text and graphic area
Menu
Find
Soft key indicators
Icons
Signal strength: Shows the received
signal strength. The greater the number
of bars, the better the signal.
Service: Appears when a call is in
progress.
No service: Appears when you are
outside a service area. When it displays,
you cannot make or receive calls. Wait a
little while for a better signal or move
into an open area to regain service.
New SMS message: Indicates that
there is an SMS new message waiting
to be checked.
13
Your phone
Icons (continued)
Alarm mode: Appears when you set an
alarm to ring at a specified time.
Lock mode: Appears when your phone
is locked.
Restriction: Appears when you restrict
the use of your phone.
Roaming: Appears when you are out of
your home area and have logged onto a
different network; for example, when
travelling in other countries.
Vibration mode: Appears when the
ringer volume for calls is set to Vibrate
or when your phone is in Silent mode.
Ringer off: Appears when the ring
volume for calls is set to Silent.
Battery status: Shows the level of your
battery. The more bars you see, the more
power you have left.
14
Your phone
External display
Your phone has an external display on the folder.
When the folder is closed, it indicates that you have
an incoming call or message. It also alerts you when
you have set an alarm at the specified time by
displaying the corresponding icon.
When you close the folder, the external display turns
on and then off after the length of time specified at
the factory.
To turn the display on, press and hold one of the
Volume keys on the left side of the phone.
Backlight
The backlight illuminates the display and keypad.
When you press any key or open the folder, the
backlight illuminates. It turns off if no key is pressed
within a given period of time, depending on the
Backlight option set in the Display menu.
To specify the length of time the phone waits before
the backlight turns off, set the Backlight menu
(Menu 6-2-2). See page 109 for further details.
Note: After the backlight turns off, the display also
turns off to conserve battery power. In
Standby mode it goes off after a given period
of time depending on the setting in the
Backlight menu and in Talk mode it goes off 10
seconds after the backlight turns off. Press
any key to turn the display on.
15
Your phone
Getting started
Service LED
Using a UIM card
The service light on the folder flashes to indicate an
incoming call, message or alarm and blinks for a few
seconds when you turn the phone on or off. It also
flashes while the battery is charging with the travel
adapter.
To activate or deactivate the service light, use the
Service LED menu (Menu 6-2-7). See page 111.
Service LED
The UIM (User Identification Module) card contains a
chip with all the information required to operate your
phone. Note the following:
• Keep all miniature UIM cards out of the reach of
small children.
• The UIM card and its contacts can easily be
damaged by scratching or bending, so be careful
when handling, inserting or removing the card.
Installing the UIM card
1. If necessary, remove the battery. Refer to page 19.
Camera
2. Slide the UIM card into the slot, as shown,
ensuring that the metal contacts of the card face
into the phone.
The camera module on the folder allows you to take
a photo or record a video while on the move.
For further details about the Camera feature, see
page 121.
16
17
Getting started
Removing the UIM card
Slide the UIM card out of the slot.
Getting started
2. Slide the battery towards the top of the phone
until it snaps into place.
Make sure that the battery is properly installed
before switching the phone on.
Using a battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes for a standard battery.
Installing the battery
Removing the battery
1. If necessary, switch the phone off by pressing and
holding the
key until the closing image
displays.
2. To remove the battery:
➀ Press the catch above the battery and hold it in
that position.
➁ Slide the battery and lift it away, as shown.
➀
1. Place the battery back on the phone so that its
tabs match the grooves on the phone.
➁
18
19
Getting started
Charging the battery
A travel adapter and a battery charger are provided
for charging your batteries.
Using the travel adapter
Getting started
3. When charging is finished and the service light
turns to green, unplug the adapter from the power
outlet and disconnect it from the phone by
pressing the buttons on both sides of the
connector (see ➀) and pulling the connector out
(see ➁).
The travel adapter allows you to use the phone while
the battery is charging, but this causes the battery to
charge more slowly.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
Make sure that the arrow on the connector is
facing toward the front of the phone.
2. Plug the adapter into a standard AC wall outlet.
The Battery Strength icon on the display
repeatedly blinks to indicate that the phone is now
charging the battery.
➀
➀
➁
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Using the battery charger
Using the battery charger, you can charge the battery
alone.
1. Insert the battery only into the slot of the battery
charger ensuring that the terminals on the battery
are in contact with those on the charger. Press the
battery down until it clicks into place.
20
21
Getting started
Getting started
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
The small light, LED, on the charger turns on.
5. Remove the battery from the battery charger.
➀
➁
LED
3. Plug the adapter into a standard AC wall outlet.
You can see the LED on the charger indicating the
charging progress by the following colours:
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged in or
is operating at a too high or too low
temperature.
4. When charging is finished, unplug the adapter
from both the power outlet and from the charger.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor lets you know by
blinking the empty Battery Strength icon (
).
You will hear a warning tone and a message at
regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
Note: Once the Low Battery Warning message has
appeared, your phone won’t play MP3 music
files or turn on the camera.
➀
➀
22
➁
23
Getting started
Switching the phone on or off
1. Open the folder.
2. Press and hold the
key for more than one
second to turn the phone on.
3. If the phone asks for a Personal Identification
Number (PIN), enter the PIN code supplied with
the UIM card. For further details about the code,
see the next page.
The service light flashes and an alert sounds.
When the system locates services, you can see
the standby mode screens on both displays.
If the phone is out of the service area, the No
service icon ( ) appears on the display. In this
case, you cannot place and receive calls. You can
try again later when service is available.
Note: You can change the display language in the
Language menu (Menu 6-2-3). See page 109.
4. When you wish to turn the phone off, press and
hold the
key for more than two seconds.
24
Getting started
WARNING!
Do not switch the phone on when mobile phone use
is prohibited or when it may cause interference or
danger.
Note: Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects the call
quality and may cause the phone to operate at
a higher power level than otherwise needed.
Using the PIN code
The PIN code supplied with the UIM card helps you
protect the UIM card against unauthorised use.
When the phone asks you to enter the code, enter
the appropriate code, displayed as asterisks for
security. If you enter an incorrect PIN code three
times in succession, your UIM card is blocked. To
unblock the card, contact your service provider.
You can enable or disable the code using the Card
setup menu (Menu 6-6-8). For further information,
see page 118.
25
Getting started
Getting started
Using the soft keys
Your phone’s modes
Your phone offers a set of functions that allows you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys marked and . Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
Standby mode
The roles of the soft keys vary according to the
function you are currently using; the labels on the
bottom line of the display just above each key
indicates its current role.
Example:
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it
on, or whenever you briefly press the
key.
When your phone is in Standby mode, you will see
the current time and date. If you enter a phone
number, you can press the key to dial it, or press
the Save soft key to save it in Phonebook.
Press the
key at any time to return to Standby
mode. Be careful; if you are on a call when you press
the
key, your phone disconnects the call and
returns to Standby mode.
Talk mode
SAMSUNG
Sa 28/06 12:08A
Menu
Press the left soft key
to access Menu mode.
26
Find
You can place and answer calls only when your
phone is turned on. During a call, the phone is in Talk
mode. While you are in Talk mode, pressing the
Menu soft key gives you a list of options. See page
41 for details.
Press the right soft key
to find a number stored
in Phonebook.
27
Getting started
Getting started
Power save mode
Silent mode
Your phone comes with a Power save feature that
automatically turns the display off when you don’t
use the phone. While this feature is active, the
phone’s battery charge is conserved.
Silent mode disables all sounds on the phone, except
for the camera shutter sound. This feature is best
used in situations where the phone might disturb
others, such as in a meeting, at a library or in a
theatre. Your phone can be set to Silent mode with a
press of a key in Standby mode.
The display switches off if no key is pressed within
one minute after you press the last key or open the
folder. You can press any key to activate the display.
Lock mode
When you lock your phone using the Lock mode
menu (Menu 6-6-1), you cannot use the phone. In
Lock mode, you can receive messages and calls, but
you cannot place a call until you unlock the phone.
To enter Silent mode, press and hold the
key until
“Entering silent mode” and the Vibration icon (
)
appear.
To exit and reactive the previous sound settings,
press and hold the
key until “Exit silent mode”
appears. The Vibration icon no longer displays.
Note: Activating Silent mode will not turn off the
camera shutter sound.
To unlock the phone, press one of the soft keys or
the navigation keys, and then enter the lock code.
For further details about locking and unlocking the
phone, see page 114.
28
29
Call functions
Call functions
Ending a call
Making a call
When you want to end your call, press the
To make a call:
1. In Standby mode, enter the area code and phone
number.
While entering a phone number, press the Pause
soft key to insert a hard pause. For more
information about pause dialling, see page 36.
2. Press the
key. The phone places the call to the
entered phone number.
Note: When you have set the Auto retry menu
(Menu 6-3) to On, the phone automatically
retries to make the call if no one answers or if
the line is busy. See page 112 for further
details.
Correcting the number
To clear
Press the
the last digit
displayed
C key.
the whole display
C key and hold it for more than
one second.
30
key.
The call time, or the length of the call, displays along
with the phone number of the called person. If the
number is stored in your Phonebook, the name
displays. If there is no match, you can press the
Save soft key and store the number in Phonebook.
For further details about storing the number in
Phonebook, see page 70.
Or, simply close the folder to end a call.
Emergency dialling
You can place calls to standard emergency numbers,
such as 112, 113, 118, 199 and three specified
numbers on the Emergency # list, even if your phone
is locked or all outgoing calls are restricted. For
further details about emergency numbers, see page
115.
31
Call functions
Call functions
Using the recent call logs
Prepend dialling
The phone stores up to 60 of the calls you dialled,
received or missed chronologically. The last call is
saved in the first position.
The Prepend option lets you add digits, such as area
codes and network feature activation codes, to a
phone number that is in your call logs before dialling
it.
To recall any of these numbers:
1. If there are characters on the display, return to
Standby mode by pressing the
key.
2. Press the
key. The list of recent calls displays.
•
: Outgoing calls
•
: Incoming calls
•
: Missed calls
3. Press the Navigation key, or the Volume keys on
the left side of the phone to scan through the list
until you find the number you want.
4. Press the
key to dial the highlighted number.
To prepend the phone numbers stored in the call
logs:
1. Access a call log in the Recent Calls list referring
to the previous page, or in the Calls menu
(Menu 1) referring to page 60.
2. When the phone number you want to dial displays,
press the Menu soft key to access the Menu
pop-up list.
3. Press the 3 key to select the Prepend option.
4. Enter the area code or feature code.
5. Press the
key to dial the number.
Making a call from phonebook
You can store the phone numbers you call regularly
in the UIM card and phone’s memory, which is called
“Phonebook.” You then simply retrieve the number to
dial. For further details about Phonebook, see page
66.
32
33
Call functions
Speed-dialling
Once you have stored phone numbers in Phonebook,
you can dial them easily with a few presses of the
keys.
From the UIM card memory
You can dial the phone numbers stored in the UIM
card memory. The capacity of the card memory may
vary depending on the card.
Enter the memory location of the number and press
and hold the final digit to dial.
One-touch dial: Memory locations 001 through 009
are special one-touch locations. You can dial the
phone numbers stored in the memory from 001
through 009 simply by pressing one key.
Press and hold the third digit of the memory location
containing the number to be dialled.
For example: Location no. 009
Press the 9 key and hold.
The number (and name) stored displays, and then
dials.
Call functions
Two-touch dial: For memory locations of two digits.
Press the second digit briefly, then hold down the
third digit of the memory cell.
For example: Location no. 023
Press the 2 key briefly and hold the 3 key.
The number (and name) stored displays, and then
dials.
Three-touch dial: For memory locations of three
digits.
Press the first and the second digit briefly, then hold
down the third digit of the memory cell.
For example: Location no. 123
Press the 1 key and the 2 key briefly, and
then hold the 3 key.
The number (and name) stored displays, and then
dials.
From the phone’s memory
Press the digits of the phone memory location
containing the number to be dialled, then press and
hold the
key.
For example: Location no. 029
Press the 2 key and the 9 key briefly, and
then hold the
key.
The number (and name) stored displays, and then
dials.
34
35
Call functions
Pause dialling
When you call an automated system, like a banking
service, you are often required to enter a password
or account number. Instead of manually entering the
numbers each time, you can store the numbers in
your Phonebook, separated by pauses.
Storing pauses in a phonebook entry
To store a number in your Phonebook that contains
pauses:
1. Enter the phone number you want to store, such as
the bank’s teleservice phone number.
2. Press the Pause soft key to insert a pause. A “P”
displays, meaning that a hard pause will occur at
that point in the dialling sequence.
The “P” stops the dialling and waits for the
teleservice to prompt you for a number. The
number following the “P” is your account number,
PIN, etc.
3. Enter the digits that need to follow the pause,
such as your account number.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Store the number in your Phonebook as you
normally would by pressing the Save soft key and
following from step 4 on page 70.
36
Call functions
Pause dialling from a stored phonebook entry
1. Dial the number from Phonebook.
2. Wait for the appropriate prompt from the number
you are calling.
3. When prompted, press the
key to send the
DTMF (Dual Tone Multi Frequency) number that
follows your pause.
“SEND DTMF” flashes on the display and the
transmitted tone sounds.
Manual pause dialling
You can enter pauses manually during the dialling
process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press the Pause soft key to insert a pause.
The screen displays a “P” indicating a pause.
3. Enter the number to be sent after the pause by
pressing the digit keys.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Press the
key.
6. After connecting, wait for the prompt from
teleservice. Press the
key again after the
prompt to send the additional number(s).
37
Call functions
Call functions
Adjusting the volume during a call
Answering a call
During a call, if you want to adjust the voice volume,
use the Volume keys on the left side of the phone.
When somebody calls you, the phone alerts you by
ringing and blinking the service light.
Press the key to increase the volume level and
the key to decrease the level. The graphics on the
display shows all five levels; the more bars you see,
the louder the volume.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
In Standby mode, you can also adjust the volume for
the key tones using these keys.
There are many ways to answer a call depending on
your setting in the Answer mode menu
(Menu 6-4);
If you select
To answer the call,
By send key
press the
By folder open
open the folder or press the
key.
By any key
open the folder or press any key
except the
key, the soft
keys and the Volume keys.
key.
To end the call, close the folder or press the
key.
Note: You can answer a call while using the
Phonebook or menu features. The current
operation stops.
38
39
Call functions
Call functions
Silencing a call ringer
Viewing missed calls
You can silence the ringer when a call comes in by
pressing one of the Volume keys on the left side of
the phone or pressing the left soft key. The “Ringer
silenced” message appears and the phone does not
ring.
If you fail to answer a call for any reason, the phone
indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, a Missed entry is created,
and the screen displays the phone number of the last
missed call.
Rejecting a call
When the display informs you of the missed call,
press the
key to access the Recent Calls list, or
the
key to clear the message and return to
Standby mode.
To reject an incoming call, press the right soft key or
the
key. You can also reject the call by
pressing and holding one of the Volume keys on the
left side of the phone with the folder closed. The
“Call rejected” message appears and the phone
returns to the previous screen.
To view the list of the missed calls, see “Missed” on
page 60.
Options during a call
Your phone provides a number of functions that you
can use during a call, you may not be able to use all
of them at all times as many of these options are
network services.
Press the Menu soft key during a call to access the
following options:
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other person cannot hear
you.
Example: You wish to say something to another
person in the room but do not want the other person
to hear you.
40
41
Call functions
Call functions
Calls: allows you to access the Calls menu. See
page 60.
Call waiting
Phonebook: allows you to access the Phonebook
menu. See page 66.
When the Call waiting menu (Menu 1-7) is
enabled, you can answer an incoming call while you
have a call in progress. See page 65 for further
details.
Silent/Quit: does not sound the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
Send my #: sends DTMF (Dual Tone MultiFrequency) tones of your phone number.
DTMF length: enables you to select Long or
Normal DTMF tones. The system used by the bank
or other service determines if you need short or long
DTMF tones. If the service is digital, as most are,
short DTMF tones will almost always work.
Call forwarding
When a waiting call is detected, the incoming call
alert sounds, depending on your network, and a text
notification displays.
To answer a waiting call:
1. Press the
key. The phone connects the calling
person and places the current person on hold.
2. Press the
callers.
key again to switch between the two
3. To end the call, press the
key or close the
phone. All of the calls are disconnected.
When the Call forward menu (Menu 1-6) is
enabled, your phone forwards incoming calls to
another phone or voicemail centre that you have
specified, even if your phone is off. For further
details, see page 64.
Activating Call Forwarding does not affect outgoing
calls made from your phone.
42
43
Call functions
Entering text
Three-way calling
This feature enables you to conduct conference calls
with two separate people at the same time. The
phone records both of them into the Outgoing call log
and you are billed airtime for each of the outgoing
calls separately. Contact your service provider to
activate Three-way Calling.
1. During a conversation, enter the phone number for
the third person and press the
key.
key
When one of the callers hangs up, you and the
remaining caller stay connected. If you initiated the
call and you hang up first, all three people are
disconnected.
44
Your phone has the following text input modes:
• T9 word: allows you to enter English characters
with only one keypress per character.
To make a three-way call:
2. When the third person answers, press the
again to begin your three-way call.
There may be times when, you will need to enter
text, such as when storing a name in Phonebook, or
writing a text message or scheduling events on your
calendar. You can enter alphanumeric characters into
your phone by using your phone’s keypad.
• ABC: allows you to enter alphabet characters by
pressing the key labelled with the character you
want until it displays.
• 123: allows you to enter numbers.
• Symbol: allows you to enter many different
symbols and special characters.
Note: T9 mode automatically compares your key
presses to an internal linguistic database to
determine the correct word.
45
Entering text
Entering text
Changing the text input mode
Example: Entering a name in Phonebook
1. In the text entry screen, press the Mode soft key.
2. Scroll to the mode you want to use by pressing the
Up or Down key.
Note: If you want to exit the mode list without
changing to a new mode, press the C key.
You can change between T9 word and ABC mode
to enter English words. To include a symbol or
number(s) between characters, Symbol and 123
modes are also available.
3. To select the highlighted mode, press the OK soft
key.
The indicator for the text input mode appears on
the display.
Name
14
Using T9 word mode
To type a word in T9 word mode, press keys
corresponding to the letters you need. Remember the
following as you are typing:
1. Press keys on the phone just once per each letter.
For example, to enter “Hello,” press the 4, 3, 5, 5,
and 6 keys.
2. The word you are typing appears on the display. It
may change with each key press.
3. Type to the end of the word before editing or
deleting any keystrokes.
If the word you want to enter does not appear on
the display, press the 0 key one or more times to
display alternative word choices for the keys you
have typed.
For example, both “Of” and “Me” have the
sequence of 6 and 3. The phone displays the most
commonly used choice first.
4. Insert a space between words by pressing the
key.
Mode
46
OK
Text input mode
indicator
To type words not found in T9 word mode, you need
to change the text input mode to ABC mode.
47
Entering text
Entering text
Smart punctuation
Scrolling
You can insert periods, hyphens, and apostrophes by
pressing the 1 key. T9 word mode applies rules of
grammar to insert the correct punctuation. Notice
that the 1 key is used twice in this example to
display two punctuation marks:
To move the cursor to the left or right through your
text, press the Left or Right key.
L
e
t
‘
s
e
a
t
.
Clearing letters and words
Press the C key once or repeatedly to clear letters
one by one to the left. Press and hold the C key to
erase all of the letters on the display.
Changing the letter-case
To shift the case of the next letter(s) that you type,
press the
key. There are three cases:
• T9 word: Lower Case
• T9 Word: Initial Capital
• T9 WORD: Capitals Lock
Including a number
You can include a number between letters without
exiting T9 word mode. Press and hold the number
key.
Inserting a space
Press the
48
key to insert a space between words.
Using ABC mode
When typing in ABC mode, you should press the key
labeled with the letter you want:
- once for the first letter
- twice for the second letter
- and so on.
This method is called Multi-tap typing.
For example, you need to press the 2 key three times
in succession to display the letter “C” and the 5 key
two times to display the letter “K.”
The cursor moves to the right when you press a
different key. When entering the same letter twice or
a different letter on the same key, just wait for a few
seconds for the cursor to automatically move to the
right, and enter the next letter.
49
Entering text
Entering text
Refer to the table below for the list of characters
assigned to each key:
Inserting a space
Press the
key to insert a space between words.
List of characters available
Key
Characters in the Order Displayed
Including a number
. @ , : ? - ; ’ / ( ) ! % & * <
> _ + = ” \ { } $ [ ] 1
You can quickly enter a number between letters in
ABC mode. Press and hold the number key.
A
B
C
2
D
E
F
3
G
H
I
4
J
K
L
5
M
N
O
6
P
Q
R
S
T
U
V
8
W
X
Y
Z
Scrolling
To move the cursor to the left or right through your
text, press the Left or Right key.
7
Clearing letters and words
9
Press the C key once or repeatedly to clear letters
one by one to the left. Press and hold the C key to
erase all of the letters on the display.
0
(Caps Lock mode)
Changing the letter-case
To shift the case of the next letter(s) that you type,
press the
key. There are three cases:
• abc: Lower Case
• Abc: Initial Capital
• ABC: Capitals Lock
50
51
Entering text
Using the menus
Using 123 mode
123 mode enables you to enter numbers into your
text.
Press the keys corresponding to the digits you want
to enter, and manually switch back to the text entry
mode of your choice. See page 46 for changing the
text input mode.
The phone offers a range of functions that allows
you to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling or using the shortcuts.
Accessing a menu function by scrolling
Using symbol mode
1. In Standby mode, press the Menu soft key to
access Menu mode.
Symbol mode enables you to enter symbols into your
text.
2. Scroll using the Navigation keys to reach a main
menu, for example, Settings. Press the Select
soft key to enter the menu.
Press the Left or Right key to display more symbol
sets. Press the key corresponding to the symbol you
want to enter, and the phone automatically switches
back to the text entry mode used just prior to
selecting Symbol mode.
3. Find the menu you want, for example, Display, by
scrolling using the Up and Down keys. Press the
Select soft key to enter the menu.
If the menu you have selected contains submenus, such as Language, repeat this step.
4. Scroll using the Navigation keys to select the
setting of your choice.
5. Press the Save soft key to confirm the chosen
setting.
Notes:
• To return to the previous menu level, press the C
key.
• You can exit the menu without changing the menu
settings by pressing the
key.
52
53
Using the menus
Using the menus
Using shortcuts
List of menu functions
The menu items, such as menus, sub-menus and
setting options, are numbered and can be accessed
quickly by using their shortcut numbers.
The following list shows the menu structure
available and indicates the number assigned to each
option.
Note: The numbers assigned to each menu function
are indicated on the list on the next page.
1: Calls
1. In Standby mode, press the Menu soft key to
access Menu mode.
2. Enter the first digit of the shortcut number. Repeat
this for each digit of the shortcut number.
Example: Changing the display language
Press the 6, 2, and 3 keys.
6 enters Settings, 2 selects Display, and 3
selects Language.
3. Scroll using the Navigation keys to select the
setting of your choice.
4. Press the Save soft key to confirm the chosen
setting.
1-1: Missed
1-2: Incoming
1-3: Outgoing
1-4: Erase logs
1-4-1: Missed
1-4-2: Incoming
1-4-3: Outgoing
1-4-4: All calls
1-5: Air time
1-5-1: Last call
1-5-2: Total
1-5-3: Life time
1-5-4: Erase total
1-6: Call forward
1-6-1: Busy
1-6-2: No answer
1-6-3: Uncondition
1-6-4: Busy/No answer
1-7: Call waiting
2: Phonebook
2-1: Find
2-2: Add
2-3: Group set
2-4: My phone #
54
55
Using the menus
3: Messages
3-1: New message
3-2: Inbox
3-2-1: Voice
3-2-2: Card
3-2-3: Phone
3-3: Outbox
3-3-1: Card
3-3-2: Phone
3-4: Erase msgs
3-4-1: Voice notif.
3-4-2: Inbox card
3-4-3: Inbox phone
3-4-4: Outbox card
3-4-5: Outbox phone
3-4-6: All messages
3-5: Msg setup
3-5-1: Scroll timer
3-5-2: Msg. reminder
3-5-3: New message
3-5-4: Canned msg.
56
Using the menus
4: Scheduler
4-1: View month
4-2: Jump to date
4-3: Alarm set
4-4: Calculator
4-5: Today
4-6: To do list
4-7: Memo pad
4-8: Countdown
4-9: World time
5: Entertainment
5-1: Music box
5-1-1: Voice calls
5-1-2: Messages
5-1-3: Alarm/Scheduler
5-2: Image box
5-2-1: Opening
5-2-2: Closing
5-2-3: Wallpaper
5-3: Games
5-4: MP3 player
5-5: Memory status
5-5-1: Total
5-5-2: Music
5-5-3: Image
57
Using the menus
6: Settings
6-1: Sounds
6-1-1: Ringer volume
6-1-1-1: Voice calls
6-1-1-2: Messages
6-1-1-3: Alarm/Scheduler
6-1-2: Key tone
6-1-3: Function alert
6-1-3-1: Alert tone
6-1-3-2: Settings
6-1-4: Hour alert
6-1-5: Voice volume
6-2: Display
6-2-1: Banner
6-2-2: Backlight
6-2-3: Language
6-2-4: Set time
6-2-4-1: Main clock
6-2-4-2: Dual clock
6-2-5: Ext.clock
6-2-6: Contrast
6-2-6-1: Main LCD
6-2-6-2: Front LCD
6-2-7: Service LED
6-3: Auto retry
6-4: Answer mode
6-5: Roam option
6-6: Security
6-6-1: Lock mode
6-6-2: Change lock
6-6-3: Emergency #
6-6-4: Voice privacy
6-6-5: Restriction
58
Using the menus
6: Settings (continued)
6-6-6: Clear memory
6-6-6-1: Card
6-6-6-2: Phone
6-6-6-3: All
6-6-7: Reset phone
6-6-8: Card setup
6-6-8-1: PIN check
6-6-8-2: Change PIN
6-6-8-3: UIM lock
6-6-9: Network select
6-7: Entry method
7: Camera
7-1: Take photo
7-2: Record video
7-3: Photo album
7-4: Video album
7-5: Settings
7-5-1: Resolution
7-5-2: Fun frames
7-5-3: Shutter sound
7-5-4: Quality
7-6: Memory status
* Available only when you use a UTK UIM card that provides
additional services. For further details, see your UTK UIM
card instructions.
59
Calls
Calls
You can use the Calls menu to:
• view and dial the last missed, outgoing or
incoming numbers.
• erase the numbers in the call logs.
• view the duration of calls.
• set the phone to receive a second call or to
forward incoming calls to a preset number.
When you access the menu options, the following
options are available:
Talk: dials the number.
Save: allows you to save the number in Phonebook.
Prepend: allows you to add an area code or feature
code to the number before calling the number.
Erase: allows you to erase the number.
Missed
(Menu 1-1)
Incoming
If Caller Line Identification is available, your phone
keeps a list of the last 20 incoming calls that you
failed to answer. Contact your service provider for
the availability.
1. Press the Up or Down key to find a number or
name, if saved in your Phonebook.
2. Press the Select soft key to select the highlighted
number. The dialled number or name, if stored in
Phonebook, displays.
3. To
place a call to
the number
60
(Menu 1-2)
This menu lets you view up to 20 of the last calls you
received if you are a subscriber to the Caller Line
Identification service. Contact your service provider
for more information about this service. When you
access this menu, the list of the incoming calls
displays.
For further details about scrolling through the list and
accessing the call log, see “Missed” on the previous
page.
Press the
key.
use the menu
options
Menu soft key. For details,
see the next page.
view other calls
Navigation keys.
return to Standby
mode
key.
61
Calls
Outgoing
Calls
(Menu 1-3)
The phone stores up to 20 of the last numbers you
dialled. When you access this menu, a list of the
outgoing calls displays.
For further details about scrolling through the list and
accessing the call log, see “Missed” on page 60.
Air time
(Menu 1-5)
Your phone records the amount of air time, or talk
time, used. Using this menu, you can view the
number of the calls to or from your phone and the air
time for all of the calls. You can easily erase the air
time record at any time.
Note: This feature is not intended to be used for
billing purposes.
Erase logs
(Menu 1-4)
In this menu, you can erase the entries stored in
each of the three call logs; missed, incoming, and
outgoing calls. You can also erase all of your call log
entries at one time by selecting All calls.
When a confirming message appears, select Yes to
erase the logs. If you want to cancel the selection,
select No.
The following options are available:
Last call: shows the air time of the last call.
Total: shows the number of all calls you made or
received and the total duration of the calls since the
air time counter was last set to zero by using the
Erase total option.
Life time: shows the number and total duration of
all calls you made or received your phone since the
phone was shipped from the factory.
Erase total: erases the “Total” air time
measurement and resets the air time counter.
62
63
Calls
Call forward
Calls
(Menu 1-6)
This network service allows incoming calls to be
forwarded to another number.
Once Call Forwarding is enabled, a notification text
appears to inform you that your calls will be diverted.
It will also inform you each time a call is forwarded.
To deactivate the call forward setting:
Note: This menu is only available when your network
operator supports it. Contact your service
provider to check the availability.
1. Choose the call forwarding option and press the
Select soft key.
The following options are available:
2. Select Disable and press the Save soft key.
Busy: Calls are forwarded when you are already on
the phone.
No answer: Calls are forwarded when you do not
answer the phone.
Uncondition: Calls are always forwarded.
Busy/No answer: Calls are forwarded when you
are already on the phone or do not answer.
To set your forwarding options:
1. Choose the type of call forwarding by pressing the
Up or Down key and press the Select soft key.
2. Select Enable and press the Save soft key.
3. Enter the area code and phone number where
your calls will be forwarded.
4. Press the Send soft key. The phone sends your
setting to your network.
64
Call waiting
(Menu 1-7)
The Call Waiting feature alerts you of incoming calls
while you are on a call.
To enable the feature, select Enable by pressing the
Up or Down key and press the Save soft key. The
phone sends your setting to your network.
When Call Waiting is enabled, you can respond to an
incoming call by pressing the
key while you are
on a call. This puts the first caller on hold and
answers the second call. For further details, see
page 43.
To deactivate the call waiting setting, select Disable
and press the Save soft key.
65
Phonebook
Phonebook
You can store phone numbers and their
corresponding names in the memory of your UIM
card and the phone. The UIM card and phone’s
memory, although physically separate, are used as if
they were a single entity, called Phonebook.
The capacity of the card memory may vary depending
on your card’s manufacturer.
Find
(Menu 2-1)
3. Enter the first few letters of the name you want to
find. You can enter characters using ABC mode by
default..
4. If necessary, press the Up or Down key to scroll
through the entries.
5. When an entry highlights:
• Press the
key to place a call to the entry’s
speed-dial number.
• Press the Menu soft key to access the
following options:
This menu allows you to find an entry using a
person’s name, entry number, group name or memory
location.
- Edit: edits the entry’s phone number, name,
location number and other information.
Note: You can quickly access this menu by
pressing the Find soft key in Standby mode.
- Add new: adds a number to Phonebook. You
can create a new entry or add it to an existing
entry. For more information about how to add
a number, see page 70.
To change the finding method, press the Up key and
press the Left or Right key until the option you want
to use displays; By name, By entry, By group, or
By storage.
Finding an entry by name
When you select this method, all of the Phonebook
entries appear in alphabetical order.
1. If necessary, press the Left or Right key to scroll to
By name.
- Erase: erases the entry.
• Press the OK soft key to select the entry.
Information about the entry displays. Move to
each item by pressing the Up or Down key.
Press the Menu soft key to use one of the
following options:
- Talk: dials the number labelled as a speeddial number.
- Edit: allows you to change the item.
2. If necessary, press the Down key to highlight the
name input box.
66
67
Phonebook
Phonebook
- Copy: allows you to copy a number to another
memory location. For an entry stored in the
phone’s memory, this option is shown only
when you select a number, such as Home,
Office, Mobile, Pager, or Fax.
- Erase: erases the entry. If you select one of
the numbers for the entry, only the number is
erased.
• Press the C key to return to the previous screen.
• Press the
key to exit this menu.
Finding an entry by entry number
Finding an entry by group
When you select this method, a list of the Phonebook
entries in a group appears.
1. Press the Left or Right key to scroll to By group.
2. Press the Down key to move to the group selection
field.
3. Press the Left or Right key to scroll through the
groups.
Each time you select a group, a list of the
associated entries displays.
When you select this method, all of the Phonebook
entries appear in numeric order of the location
numbers.
4. Follow the procedure from step 4 on page 67.
1. Press the Left or Right key to scroll to By entry.
When you select this method, a list of the Phonebook
entries in the UIM card appears first.
2. Press the Down key to highlight the number input
box.
Finding an entry by storage
1. Press the Left or Right key to scroll to By storage.
3. Enter the location number of the entry you want to
find.
2. Press the Down key to move to the memory
selection field.
4. Follow the procedure from step 4 on page 67.
3. Press the Left or Right key to scroll through the
memory, Card and Phone.
Each time you select a memory, a list of the
associated entries displays.
4. Follow the procedure from step 4 on page 67.
68
69
Phonebook
Add
(Menu 2-2)
Phonebook
5. Your phone shows the entry information. Press the
Up or Down key to scroll through the items.
This menu allows you to add a new entry to your
Phonebook by saving a phone number, an
e-mail address or a memo.
• Name: Press the Edit soft key to change the
name you entered in step 4, if necessary. You
can enter a name in this step if one has not
already been entered.
Adding a new entry using a number
• Storage: Shows the memory where the number
is stored. The card memory is automatically
selected for storing the number.
In the Phone memory, a name can contain up to 5
numbers in different categories; Home, Office,
Mobile, Pager, and Fax. You can save only one
number with a name in the Card memory.
1. After accessing the Add menu (Menu 2-2), select
Number from the pop-up list and press the OK
soft key.
2. Enter a number you want to save and press the
Save soft key.
3. Press the Save soft key to accept New entry.
4. Enter a name and press the OK soft key.
For more information about how to enter
characters, see page 45.
70
• Location number: The first available location
displays. If you need to, enter the location
number using the number keys or press the Left
or Right key until the location number you want
to use appears.
• Number: Shows the number you entered in
step 2. You can change the number or insert a
pause using the Pause soft key.
6. To save the number in the card, skip to step 10.
To save it in the phone’s memory, highlight the
storage or location number field and press the
Phone soft key. Continue the next steps.
7. Choose a type icon, Home, Office, Mobile,
Pager, or Fax using the Navigation keys and
press the Select soft key.
71
Phonebook
Phonebook
8. Press the Up or Down key and change the setting
or enter more information, if necessary.
• Name: Shows the entry name.
• Storage: Shows the memory where the number
is stored.
• Location number: Shows the location number.
• Home/Office/Mobile/Pager/Fax: You can add
numbers for each category or change the current
number.
• E-Mail/E-Mail2: Press the Edit soft key to
enter an e-mail address. For more information
about how to enter characters, see page 45.
• ETC: Press the Edit soft key to add a memo
about the person.
9. Repeat step 8 until you complete the contact
information of the entry.
10. Press the Save soft key to save the entry.
After storing, the phone displays the memory status
of Phonebook for a few seconds and goes to the
Phonebook list.
Saving a phone number from standby mode
1. In Standby mode, enter a number you want to
save.
Or, press the
key to end the call. The call
time and the phone number display.
2. Press the Save soft key.
• Load image: Allows you to assign one of the
photos you took using the camera as a caller ID
image to be displayed when you receive a call
from the selected number.
3. Enter a name and press the OK soft key.
• Speed dial: Select the category of the number
you want to use for speed-dialing, by pressing
the Left or Right key .
4. Follow the procedure from step 5 on page 71.
• Group: Select one of the default relation groups,
where the entry is included. Grouping the entries
enables you to search for a number in the group.
See page 69.
• Ringer: Select a unique ringer melody for the
entry. By selecting a different tone for each
entry, incoming voice calls having a caller ID can
be distinguished from those that do not.
For more information about how to enter
characters, see page 45.
Adding a number into an existing entry
You can store up to 5 numbers for a name saved in
the phone’s memory by assigning them to the
different types.
1. After accessing the Add menu (Menu 2-2), select
Number from the pop-up list and press the OK
soft key.
2. Enter a number you want saved and press the
Save soft key.
72
73
Phonebook
3. Press the Up or Down key to select Find and press
the Save soft key.
4. Find the name you want using the Up and Down
keys and press the OK soft key.
5. Select a type icon by pressing the Navigation keys
and press the Select soft key.
6. Follow the procedure from step 8 on page 72.
7. When the confirmation message to overwrite the
entry appears, select Yes and press the Select
soft key.
Adding a new entry using an e-mail address
You can store an e-mail address as a Phonebook
entry.
1. After accessing the Add menu (Menu 2-2), select
E-mail from the pop-up list and press the OK soft
key.
2. Enter the e-mail address and press the OK soft
key.
Phonebook
4. Enter a name and press the OK soft key.
5. Follow the procedure from step 8 on page 72.
Adding a new entry using a memo
You can make a memo about a person as a
Phonebook entry.
1. After accessing the Add menu (Menu 2-2), select
ETC from the pop-up list and press the OK soft
key.
2. Enter a memo and press the OK soft key.
For more information about how to enter
characters, see page 45.
3. Press the Save soft key to accept New entry.
Note: To add the memo to an existing entry, select
Find. Find the name from the Phonebook
list and press the OK soft key.
4. Enter a name and press the OK soft key.
5. Follow the procedure from step 8 on the page 72.
For more information about how to enter
characters, see page 45.
3. Press the Save soft key to accept New entry.
Note: To add the address to an existing entry,
select Find. Find the name from the
Phonebook list and press the OK soft key.
74
75
Phonebook
Messages
Group set
(Menu 2-3)
This menu allows you to change a group’s name.
1. Press the Up or Down key to select the group you
want to rename and press the Select soft key.
2. Press the C key to erase the old group name.
3. Enter a name.
For more information about how to enter
characters, see page 45.
4. Press the OK soft key to save the new name.
My phone #
(Menu 2-4)
In this menu, you can write new SMS
(Short Message Service) messages and check your
incoming messages.
Your phone can receive voice mail notifications, text
messages, and web messages from your web server.
Your phone can also send text messages if your
system supplier provides this service.
Incoming messages are received even when your
phone is in Lock mode. To access the message, you
need to unlock the phone.
If you receive an incoming message during a call
conversation, your phone sounds an alert tone or
vibrates, depending on your sound settings.
Note: You can quickly enter the Messages menu by
pressing the Left key in Standby mode.
This menu shows your phone number.
To change the phone number:
1. Press the Edit soft key when the number displays.
2. Enter a new phone number and press the Save
soft key.
76
77
Messages
Messages
New message
(Menu 3-1)
You can create short text messages and send them
to multiple mobile phones.
1. Enter the message contents and press the OK soft
key.
Your phone informs you whether or not the
message was successfully sent, and returns to the
Message menu screen.
For more information about how to enter
characters, see page 45.
Inbox
You can use up to 20 canned messages by
pressing the Mode soft key and selecting
CannedMsg.. For details, see page 84.
Your phone can store SMS messages and their
corresponding Caller ID in your UIM card and phone’s
memory. If your memory is full, the screen displays a
text notification and rejects additional incoming
messages until you erase the obsolete ones.
2. Select one of the following options and press the
OK soft key:
• Send & Save: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
in your Outbox.
• Send only: allows you to send the message.
The message will be deleted after sending.
• Save only: allows you to save the message so
that it can be sent later. You can read the
message in your Outbox.
3. Enter a phone number.
If you press the Find soft key and select
Phonebook, you can search your Phonebook for a
number. For details, see page 66.
4. To send the message to multiple destinations,
press the Down key and enter another number.
Repeat this step to add more destinations. You
can send the message to up to 10 destinations at
one time.
78
5. When you finish entering the numbers, press the
OK soft key to send or save the message.
(Menu 3-2)
Voice
When you receive a voice mail message, the Voice
mail icon ( ) and the corresponding text
notification displays. Press the
key to place a call
to the voice mail centre. Then follow the voice
prompts from the system to listen to the message.
Note: You can quickly access your voicemail server
by pressing and holding the Left key in
Standby mode.
You can also check your voice messages by
accessing the Voice menu (Menu 3-2-1).
For further details about the voice mail service and
its availability, contact your service provider.
79
Messages
Messages
Text messages
Outbox
When the phone receives a text message, the New
SMS message icon ( ) and a text notification with
the call back number appear. Press the OK soft key
to view the message immediately.
Your phone can store your outgoing messages in your
UIM card and phone’s memory.
When you access the Card menu (Menu 3-2-2) or
Phone menu (Menu 3-2-3), a list of the received
message displays. An icon displayed on the list
shows the message’s status:
(Menu 3-3)
When you access the Card menu (Menu 3-3-1) or
Phone menu (Menu 3-3-2), a list of the sent
messages display. An icon displayed on the list
shows the message’s status:
•
: indicates that the message was successfully
delivered.
: indicates that a duplicate message was sent.
•
: indicates that the message was not sent.
: means that the message is urgent.
Press the Up or Down key to scroll to the message
you want and press the View soft key. The phone
displays the contents along with the destination
number. If necessary, press the Up or Down key to
scan through the message.
•
: displays when you have read the message.
•
•
Press the Up or Down key to scroll to the message
you want and press the View soft key. The phone
displays the contents. If necessary, press the Up or
Down key to scan through the message.
While viewing a message, press the Menu soft key
to use the following options:
Reply: allows you to send a reply message to the
sender.
Forward: allows you to send the message to other
people.
Call/Save: shows the list of the sender’s number,
the callback number and numbers from the message
text, if any. Press the
key to dial the selected
number. To save it in your Phonebook, press the
Save soft key.
While viewing a message, press the Menu soft key
to use the following options:
Resend: allows you to send the message to other
people.
Call/Save: shows the list of the destination number
and numbers from the message text, if any. Press the
key to dial the selected number. To save it in your
Phonebook, press the Save soft key.
Erase: erases the message from your Outbox.
Erase: erases the message from your Inbox.
80
81
Messages
Messages
Erase msgs
(Menu 3-4)
Using this menu, you can erase all of the messages
in each message box; voice notification, card inbox,
phone inbox, card outbox and phone outbox.
Msg. reminder
(Menu 3-5-2)
When a message is received, your phone alerts you
by sounding the specified ringer. You can set how
often this will happen.
You can also erase all of the messages at one time
using the All messages option.
Off: The phone doesn’t alert you after you receive an
incoming message but the New Message icon
appears.
Msg setup
Once: The phone alerts you just once when you
receive an incoming message.
(Menu 3-5)
Using this menu, you can set up various options for
receiving or sending messages.
Scroll timer
(Menu 3-5-1)
If an incoming message is too long for the display,
the phone displays it by scrolling the screen
automatically. You can set the time interval the
phone scrolls to the next screen, from 1 to 5
seconds.
Every 2 min: The phone alerts you every 2 minutes
when you receive an incoming message.
New message
(Menu 3-5-3)
You can set up the following options as default
settings when creating a new message:
Priority: allows you to set the priority level of the
messages from Normal, Urgent.
When this option is set to Off, you need to manually
scroll to the next screen using the Up or Down key.
82
83
Messages
Scheduler
Canned msg.
(Menu 3-5-4)
Your phone has 11 preset messages to enable you to
use them when writing a new message.
You can change them, if necessary, and add up 9
messages.
1. Press the Up or Down key to highlight the
message you want to change.
To add a new message, select an empty location.
The Scheduler feature enables you to:
• keep track of important dates and events.
• set the phone to ring at a specified time.
• use the phone as a calculator.
• create a list of things to do.
• set and count down to D-Day.
• check the current time in another part of the world.
Note: When you are out of your service area, you
cannot use some of the features in the
Scheduler menu.
2. Press the Select soft key.
3. Clear the existing message using the C key, if
necessary, and enter a new message.
For further details about how to enter text, see
page 45.
4. Press the OK soft key to save the message.
View month
(Menu 4-1)
This menu allows you to view the current month, as
well as the past or future months in calendar format.
You can be alerted by the Calendar function before
an event commences.
When you access this menu, the current day is
automatically selected and indicated by a blue box
on the calendar.
Note: You can quickly enter this menu by pressing
the Right key in Standby mode.
84
85
Scheduler
Selecting a day on the calendar
• You can move to the next or the previous day by
pressing the Left or Right key.
• You can move up or down the Calendar by week by
pressing the Up or Down key.
• You can view the next or previous month by using
the Volume keys on the left side of the phone.
On the calendar, press the Menu soft key to use the
following options:
View: allows you to view the scheduled events of
the day.
Add new: allows you to add a new event on the
day.
Scheduler
3. Enter the Start time and date using the numeric
keys and press the Down key.
Notes:
• You need to enter the time 12-hour format.
• You can move through the input fields using the
Left and Right keys.
4. Enter the End time and date using the numeric
keys and press the Down key.
5. Specify when an alarm alerts you to your event, by
pressing the Left or Right key. When you select
No alarm, the phone does not ring the alarm.
6. Press the Save soft key to save your event.
Viewing your schedule
Scheduling an event
You can schedule up to 9 events for one day and 20
events total.
1. Select a day from the calendar, referring to
“Selecting a day on the calendar,” and press the
OK soft key.
2. Enter your event information and press the OK soft
key to accept your input.
For further details about how to enter characters,
see page 45.
Days with scheduled events are indicated by a box
on the calendar when you access the View month
menu (Menu 4-1). Select one of them and press the
OK soft key. The first event displays.
Highlight to the event you want to view by pressing
the Left or Right key. If necessary, press the Down
key to display the end time of the event.
While viewing an event, press the Menu soft key to
use the following options:
Add new: allows you to add a new event.
Edit: allows you to edit the event.
Erase: erases the event.
Erase all: erases all of the scheduled events.
86
87
Scheduler
Scheduler
Jump to date
(Menu 4-2)
This feature allows you to specify a date so that you
can easily access the day without scrolling through
the calendar.
1. Enter the date using the numeric keys and press
the Save soft key.
Notes: You can move through the input fields
using the Left and Right keys.
2. When the date you entered highlights on the
calendar, press the Save soft key to access it.
For further details about scheduling or viewing
events, see “View month” on page 85.
Alarm set
2. Press the Save soft key.
3. Enter the time for the alarm to ring by using the
numeric keys.
Notes:
• You can move through the input fields using the
Left and Right keys.
• You must enter the hour 12-hour format..
4. Press the Save soft key to save the setting.
To stop the alarm when it rings, open and close the
folder or press any key.
To deactivate the alarm, access the Alarm set menu,
select Off.
Calculator
(Menu 4-4)
(Menu 4-3)
This menu allows you to set the alarm to ring at a
specific time.
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication and division.
To set the alarm:
1. Select the alarm frequency option by pressing the
Navigation keys.
• Once: The alarm rings only once and is then
deactivated.
• Daily: The alarm rings every day at the same
time.
88
To perform a calculation:
1. Enter the first number using the numeric keys.
Notes:
• To erase any mistakes or clear the display, press
the C key.
• Use the key to enter a decimal point and the
key to change the sign of a number to a
negative (-).
89
Scheduler
2. Select the operation for your calculation by
pressing the Navigation keys according to the
illustration on the display; + (add), - (subtract),
x (multiply), ÷ (divide).
3. Enter the second number.
4. To view the result, press the OK soft key.
5. Repeat steps 1 to 4 as many times as required.
Today
(Menu 4-5)
You can schedule up to 9 events for the current day,
indicating each event’s starting and ending time.
Events scheduled on future dates automatically
appear on your Today display on that particular day.
For further details about scheduling and viewing
events, see “View month” on page 85.
Scheduler
To do list
(Menu 4-6)
This feature allows you to enter a list of tasks you
need to do and assign both a priority and a deadline
to them. You can store up to 20 tasks.
Creating a to do item
1. Enter the task contents and press the OK soft key.
For more information about how to enter
characters, see page 45.
2. Select High or Low priority using the Left or Right
key and press the Down key.
3. Enter the time and date when your task needs to
be done using the numeric keys.
Notes:
• You can move through the input fields using the
Left and Right keys.
• You must enter the hour in 12-hour format.
4. Press the Save soft key to save the task.
Viewing to do list
When you access the To do list menu (Menu 4-6),
the first task displays along with the deadline and the
associated priority highlighted;
for high priority or
for low priority.
Scroll to the task you want to view by pressing the
Left or Right key.
90
91
Scheduler
Scheduler
While viewing a task, press the Menu soft key to
use the following options:
While viewing a memo, press the Menu soft key to
use the following options:
Add new: allows you to add a new task.
Add new: allows you to add a new memo.
Edit: allows you to edit the task.
Edit: allows you to edit the memo.
Erase: erases the task.
Erase: erases the memo.
Erase all: erases all of the tasks.
Erase all: erases all of the memos.
Memo pad
Countdown
(Menu 4-7)
This feature allows you to make memos of important
things you need to remember.
Writing a new memo
1. Enter what you need to remember.
For further details about how to enter characters,
see page 45.
2. Press the OK soft key to save the memo.
Viewing a memo
The list of your memos displays when you access
the Memo pad menu (Menu 4-7). To view details,
press the Navigation keys to scroll to the memo you
want to view from the list and press the Select soft
key.
(Menu 4-8)
This menu helps you know how much time it takes
for you to do something or how many days, hours
and minutes until a specific event occurs. You can
create up to 20 Countdown timers using this feature.
Creating a countdown timer
1. Enter a name for your Countdown timer and press
the OK soft key.
For more information about how to enter
characters, see page 45.
2. Enter the time and date you want to count down
from.
Notes:
• You can enter between 1981 and 2099 for the
year.
• You can move through the input fields using the
Left and Right keys.
• You must enter the hour in 12-hour format.
3. Press the Save soft key to save the timer.
92
93
Scheduler
Entertainment
Viewing a countdown timer
The first Countdown timer displays when you access
the Countdown menu (Menu 4-8).
Scroll to the timer you want to view by pressing the
Left or Right key.
Using the Entertainment menu, you can download
and enjoy various contents, such as images, sounds,
games or MP3 files from the Wireless Web. You can
also manage the downloaded contents.
While viewing a timer, press the Menu soft key to
use the following options:
Music box
Add new: allows you to create a new timer.
This menu allows you to set the unique ringer
melodies for the following items. You can select one
of the default melodies or ones downloaded from the
Wireless Web or using the PC link programme:
Edit: allows you to edit the timer.
Erase: erases the timer.
(Menu 5-1)
Erase all: erases all of the timers.
Voice calls: allows you to select a ringer for
incoming voice calls.
World time
(Menu 4-9)
You can use this menu to find out what time it is in
another part of the world and apply the DST
(Daylight Saving Time) to a time.
Press the Navigation keys to scroll to the time zone
you want to check.
Note: You can quickly change the call ringer in
Standby mode. Press and hold the key.
Messages: allows you to have a ringer for incoming
voice mail, text messages and web alerts.
Alarm/Scheduler: allows you to have a ringer for
alarm settings and the scheduler alarm.
To select a melody:
To apply the Daylight Saving Time:
1. After selecting the time zone you want to apply
the DST, press the DST soft key.
2. Select Yes using the Left or Right key and press
the Select soft key. The DST icon appears on the
left of the time.
1. Select an item you want and press the Select soft
key.
2. Select the ringer category you want using the Left
and Right keys and press the Down key.
When you select Messages in step 1, skip to
step 3.
To cancel the setting, select No.
94
95
Entertainment
3. Scroll through the ringers using the Left and Right
keys. After you change it, it sounds.
4. Press the Select soft key when you find the ringer
you want.
To erase a melody:
1. On the list of the downloaded melodies, My
melody or MP3 melody, scroll to the melody you
want to erase and press the Erase soft key.
2. When a confirmation message appears, select Yes
and press the Select soft key.
Image box
(Menu 5-2)
This menu allows you to change the background
image to be displayed in Standby mode or when the
phone is turned on or off. You can also erase
downloaded images or photos.
Entertainment
To select an image:
1. Select an item you want and press the Select soft
key.
2. Select the image category you want and press the
Select soft key.
You can select one of the default images, ones
you downloaded from the web or photos you took..
3. Scroll through the images using the Navigation
keys.
4. Press the Select soft key when you find the
image you want.
To erase an image:
1. On a image list of the My image, or Photo, scroll
to the image you want to erase and press the
Erase soft key.
2. When a confirmation message appears, select Yes
and press the Select soft key.
The following options are available:
Opening: You can select an image to display when
you turn the phone on.
Note: When you delete a photo you took in this
menu, it is also deleted from the Photo album.
Closing: You can select an image to display when
you turn the phone off.
Wallpaper: You can select an image to display on
the idle screen.
96
97
Entertainment
Games
(Menu 5-3)
You can enjoy games using your phone.
To start a game:
Entertainment
• SOUND: allows you to turn the game sound on
or off.
• VIBRATION: allows you to turn the vibration on
or off.
1. Press the Up or Down key to scroll to one of the
games and press the Select soft key.
• BACK/ : goes back to the previous screen.
You need to select this option after changing
the options.
2. Press one of the Navigation keys or the right soft
key.
Note: The available options may be different
depending on the selected game.
The phone displays the following options:
• NEW GAME: allows you to start a new game.
5. While playing a game:
To
Press the
• HIGH SCORE: shows you the high score table.
pause/resume the game
C key.
• HELP/KEY INFO: gives you the key helper
screen to play the game.
exit the game
• CONTINUE: allows you to continue the last
game you played. This option is activated only
when you have played a game.
key.
Note: The key operation may vary depending on the
selected game. Please use the on-screen
help.
3. Select NEW GAME or CONTINUE using the Up
or Down key and press the right soft key.
4. When START GAME or START is highlighted,
press the right soft key.
To use the following options, select OPTION.
Press the Up or Down key to scroll to an option
and change the setting using the right soft key:
• DIFFICULTY: allows you to change the game
level.
98
99
Entertainment
MP3 player
Entertainment
(Menu 5-4)
To
Your phone provides you with the MP3 player
function to enable you to enjoy MP3 music files.
Before using the MP3 player, you need to download
MP3 files stored in your PC to your phone‘s memory
through the MP3 manager programme downloaded
at www.samsung.com/id.
Notes:
• Your phone can store MP3 files of up to 16 MB.
• You can download MP3 files with a transmission
speed of 40 to 128 Kbps.
skip to the next file Right key.
change the
repeating mode
Down key until a repeat mode
icon appears.
•
: repeats the current
file.
•
: repeats all of the files
you selected.
•
: repeats all of the files.
•
: shuffles the files.
adjust the volume
Volume keys.
stop playing
Stop soft key or C key.
exit the MP3 player End soft key.
Playing MP3 files
You can play all of the MP3 files stored in your
phone or the selected file(s).
To play all of the files in the phone:
1. Press the
Press the
key from the MP3 player screen.
2. You can use the following options while playing a
file:
To play a file:
1. Press the Up key to view the file list.
When you press the Option soft key, the following
options are available:
• Multi-select: plays all files you selected. For
details, see page 102.
• Erase: deletes the file.
To
pause or resume
playing
100
Press the
key.
access the previous
file
Left key twice.
skip to the beginning
of the file
Left key.
• Erase all: deletes all files.
• Visual effect: allows you to select an image
shown on the screen while a file is playing.
• File info: allows you to view information about
the file, such as the name, date when the file
was downloaded, size and format.
101
Entertainment
2. Select a music file you want using the Up and
Down keys and press the Play soft key.
For details about using the keys while playing the
file, see page 100.
To play the selected files:
1. Press the Up key to view the file list.
2. Press the Option soft key and select Multiselect.
3. Select the file you want using the Navigation keys
and press the Check soft key or key. Repeat
this step to select more files.
4. Press the Play soft key.
For details about using the keys while playing
files, see page 100.
Entertainment
Memory status
(Menu 5-5)
This menu allows you to check the amount of the
memory being used or memory remaining available
for downloaded contents, such as melodies, images,
games and other applications.
Total: shows the total space including the used and
free space.
Music: shows the list of downloaded music files,
such as bells or melodies.
Image: shows the list of downloaded image files,
including pictures and animated images.
You can also delete obsolete contents from the
content list to free memory space to store a new
one.
Notes:
• You can receive a call while an MP3 file is playing.
After ending the call, the phone returns to Play
mode.
• When you receive a message while an MP3 file is
playing, a warning tone beeps and the playing
continues.
• When the alarm time expires while an MP3 file is
playing, the file pauses and the alarm rings. After
you stop the alarm, the phone returns to Play
mode.
102
103
Settings
Settings
Many different features of your phone can be
customised to suit your preferences.
Press the Navigation keys to adjust the volume level
or select the type. The following options are
available:
Silent: The phone does not sound a ring.
Sounds
(Menu 6-1)
You can use this menu to customise various sound
settings, such as the:
• ringer volume.
• key tone and voice volume.
• tone that sounds while using the phone’s
functions.
• tone that alerts you every hour on the hour.
Ringer volume
(Menu 6-1-1)
This menu allows you to adjust the ringer volume for
the following items:
Voice calls: allows you to adjust the ringer volume
for the incoming calls.
1 Beep: The phone sounds a beep.
Vibrate: The phone switches to Vibration mode. An
incoming call vibrates the phone.
Level 1 ~ 5: You can adjust the volume level. The
graphic shows the volume level; the more bars, the
louder the volume.
Key tone
(Menu 6-1-2)
This menu allows you to select the type of the key
tone that the phone sounds each time you press a
key.
Function alert
(Menu 6-1-3)
Note: You can adjust the volume using the Volume
keys on the left side of the phone in talk mode.
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have happened
while using your phone.
Messages: allows you to adjust the ringer volume
for incoming messages.
Alert tone
Alarm/Scheduler: allows you to adjust the ringer
volume for alarm settings and the scheduler alarm.
In this menu, you can select a tone for the function
alerts.
Select one of the three alert tones.
104
105
Settings
Settings
Settings
Hour alert
You can turn on or off each alert. Press the Check
soft key to place a check mark in front of the alert
you want to turn on. You can delete the check mark
by pressing the Uncheck soft key.
You can set your phone to sound an alert every hour
on the hour.
The following alerts are available:
Select/Saving: When this alert is selected, the
phone sounds an alert when you save your selection
or change a menu function.
Cancel/Warning: When this alert is selected, the
phone sounds an alert when you cancel your
selection or change when a confirming message
appears.
Folder: When this alert is selected, the phone
sounds an alert when you open or close the phone’s
folder.
Connect: When this alert is selected, the phone
sounds a connect tone when your call is connected
to the system.
Disconnect: When this alert is selected, the phone
sounds a disconnect tone when a call is
disconnected.
(Menu 6-1-4)
1. Enter the time period when the phone uses the
hour alert using the number keypad.
2. Press the Down key and select On by pressing the
Up or Down key.
3. Press the Save soft key.
If you want to deactivate the hour alert, select off.
Voice volume
(Menu 6-1-5)
This menu enables you to adjust the voice volume of
the earpiece.
Press the Navigation keys or the Volume keys on the
left side of the phone to adjust the volume. The
graphic shows the volume level; the more bars you
see, the louder the volume.
Note: During a call, you can adjust the volume using
the Volume keys.
Power on/off: When this alert is selected, the
phone sounds an alert when you turn the phone on or
off.
Silent mode: When this alert is selected, the phone
sounds an alert when you exit Manner mode.
106
107
Settings
Display
Settings
(Menu 6-2)
The Display feature enables you to:
• create your own greeting.
• set the length of time for the backlight.
• change the display language.
• set the current time and date.
• change the clock type for the external display.
• turn the service light on or off.
• adjust the contrast of the display.
Banner
Backlight
In this menu, you can select the length of time the
backlight remains on.
After the last key is pressed or you open the folder,
the backlight remains on for a specified period of
time and then turns off if no keys are pressed.
Remember that the backlight use drains your battery
faster.
Language
(Menu 6-2-1)
This menu allows you to set a banner message to
display at the bottom of the display in Standby mode.
(Menu 6-2-2)
(Menu 6-2-3)
You can change the language of the menu display
and key input. Select Indonesian, English, or
Chinese MMI.
To change the banner:
1. If necessary, press the C key to clear the old
message.
2. Enter a new banner message using the
alphanumeric keys.
For more information about how to enter
characters, see page 45.
3. When you finish entering the message, press the
OK soft key to save it.
Set time
(Menu 6-2-4)
This menu allows you to set the current time and
date. The following options are available:
Main clock
The current time, if set, displays. In a service area,
your phone automatically receives time information
from the network.
1. Enter the current time and date using the number
keypad.
The month, day, hour and minute must each be
entered using 2 digits and the year requires all
four digits.
108
109
Settings
Notes:
• You need to enter the time 12-hour format.
• You can move through the input fields using the
Left and Right keys.
2. When you are finished, press the Save soft key.
Settings
Ext.clock
(Menu 6-2-5)
You can change the type of clock to be shown on the
external display in Standby mode.
Select one of the four options; Digital clock and
Analog clock 1 through Analog clock 3.
Dual clock
You can choose two time zones to be displayed when
you select Dual clock for the wallpaper image
(Menu 5-2-3); see page 96.
Contrast
(Menu 6-2-6)
You can adjust the contrast of the display screen to
see it better in different lighting conditions.
To select time zones for the dual clock:
1. When Location highlights, press the Down key.
2. Select the time zone for the left clock by pressing
the Left or Right key and press the Down key.
3. Select the time zone for the right clock by pressing
the Left or Right key.
4. Press the Save key.
To apply the daylight saving time:
To adjust the display contrast:
1. Select either Main LCD or Front LCD and press
the Select soft key.
2. Adjust the contrast by using the Left and Right
keys. Each time you press the keys, you will see
the status of the display.
3. When you are satisfied, press the Select soft key
to save the selection.
1. When Location highlights, press the Left or Right
key to display Summer time. Press the Down key.
Service LED
2. Select On to use the daylight saving time for the
left clock. Otherwise, select Off.
The service light on the folder blinks to indicate the
service status. In this menu, you can activate or
deactivate the feature of the service light.
(Menu 6-2-7)
3. Press the Down key and repeat step 2 for the right
clock.
4. Press the Save key.
110
111
Settings
Auto retry
Settings
(Menu 6-3)
When this menu is set to On, your phone
automatically redials the number when a connection
fails.
Depending upon your location, the number of times
your phone automatically redials the number may be
different.
Answer mode
(Menu 6-4)
This menu allows you to select how to answer an
incoming call.
The following options are available:
Roam option
(Menu 6-5)
Roaming is a feature which is only relevant in areas
where there are at least two cellular service
providers having valid roaming agreements. Roaming
allows you to register your phone on one of the
networks, but use the facilities of the other if your
own network is not available. This system priority
feature allows you to programme your phone for
optimum operation within or outside your home
service area.
You should always check your phone’s display
because it will let you know when you’re outside the
service provider network and whether your phone is
operating in another network; the Roaming icon ( )
appears.
By send key: The phone answers only when you
press the
key.
You have the following options which allows you to
control the phone’s roaming ability:
By folder open: The phone answers when you open
the folder. If the folder is already open, press the
key.
Home only: with this setting, you cannot roam.
When your home system is not available, your call is
not be connected and the No Service indicator ( )
displays.
By any key: When the folder is open, you can press
any key except for the
key, the soft keys and
the Volume keys. When the folder is closed, you can
answer the call by opening the folder.
112
Automatic: your phone automatically searches for
the first available one of all types of services,
according to the Preferred Roaming List supplied by
the service provider.
113
Settings
Security
Settings
(Menu 6-6)
Your phone provides you with various security
options, including a user-programmable lock code
and special number features.
To access the Security menu, you must enter the 4digit lock code. It is preset to “0000” at the factory.
Lock mode
(Menu 6-6-1)
In Lock mode, you cannot dial numbers, except for
making an emergency call, or access menu options.
The phone can receive incoming calls and messages,
even though the phone is in Lock mode.
The following options are available:
Never: The phone remains unlocked.
On power up: The phone is automatically locked the
next time you turn the phone on.
Now: The phone is immediately locked.
To place an emergency call in Lock mode, enter a
programmed number and then press the
key. The
phone recognises standard emergency numbers, such
as 112, 113, 118 or 199, and three numbers
programmed in the Emergency # menu (Menu 6-63); see the next page.
To unlock the phone, press one of the soft keys and
the Navigation keys and enter the 4-digit lock code.
The phone is immediately unlocked.
114
Change lock
(Menu 6-6-2)
This feature allows you to change your current lock
code to a new one. The lock code is preset to “0000”
at the factory.
Enter a new, four-digit lock code and enter the code
once again at the prompt.
Note: Your phone does not allow viewing of the lock
code for security reasons. Be sure to write the
lock code down or memorise it if you have
changed.
Emergency #
(Menu 6-6-3)
Your phone provides the option of storing four
emergency numbers. All of these numbers can be
manually dialled at any time, even if your phone is
locked or all of outgoing calls are restricted.
IMPORTANT NOTICE!
Emergency calling may not be available on all
wireless networks at all times. A connection cannot
always be guaranteed, due to the various
transmission methods, network parameters and user
settings used to complete a call from your wireless
phone.
DO NOT depend on this phone as a primary method
of dialling 112 or for any other essential or
emergency communications.
Remember to always turn your phone on and check
for the adequate signal strength before placing a
call.
115
Settings
Settings
To store an emergency number:
1. Press the Up or Down key to select the number
location and press the Select soft key.
Restriction
(Menu 6-6-5)
This feature allows you to restrict the use of your
phone.
2. Press the C key to clear the existing number.
The following options are available:
3. Enter a new number and press the Save soft key.
Note: 112, 113, 118, and 199, remain as emergency
numbers, even if you change them on the
Emergency # list.
To make an emergency call in Lock mode, simply
enter one of the programmed emergency numbers
and press the
key.
Voice privacy
(Menu 6-6-4)
Used only in digital networks, Voice Privacy encrypts
the voice channel so that people cannot eavesdrop
on your conversation.
The following options are available:
Standard: The phone uses a standard line for calls.
Enhanced: The phone makes and receives calls on
an encrypted high security line.
Note: This feature may not be available in all areas.
Contact your service provider for its
availability and details.
Outgoing: restricts all outgoing calls from your
phone except emergency calls by standard
emergency numbers, such as 112, 113, 118, or 199,
and the four programmed numbers on the Emergency
# list (Menu 6-6-3).
Incoming: restricts all incoming calls.
Phonebook: restricts the access to your Phonebook.
You cannot add a new entry.
When a confirming message displays, select Yes to
restrict the calls or No to deactivate the restriction.
Clear memory
(Menu 6-6-6)
This menu allows you to erase your Phonebook
entries in the UIM card or phone’s memory. You can
also erase all of the entries at one time.
The following options are available:
Card: clears all of the entries stored in the card.
Phone: clears all of the entries stored in the phone’s
memory.
All: clears all of the Phonebook entries.
When a confirming message displays, select Yes to
clear the memory or No to cancel your selection.
116
117
Settings
Settings
Reset phone
(Menu 6-6-7)
Resetting the phone restores the default settings of
all the user-selectable options.
When a confirming message displays, select Yes and
press the Select soft key to confirm. The phone
reboots, turning itself off and then back on, and
returns to Standby mode.
Change PIN
This feature allows you to change the PIN of the UIM
card to a new one, provided that the PIN Check
feature (Menu 6-6-8-1) is enabled. You must enter
the current PIN before you can specify a new one.
UIM lock
Note: The UIM card and phone’s memory cannot be
reset.
When this feature is enabled, your phone only works
with the current UIM card. To use a different card,
you need to enter the UIM lock code.
Select No or press the C key to cancel your
selection.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
Card setup
(Menu 6-6-8)
In this menu, you can use the options for the UIM
card.
PIN check
When this feature is enabled, you must enter the PIN
assigned to your UIM card each time you switch the
phone on. Consequently, any person who does not
have your PIN cannot use your phone without your
approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
118
To unlock the UIM card, you must enter the UIM lock
code.
Network select
(Menu 6-6-9)
This menu allows you to select your phone’s WAP
browser.
Insert a card and select a suitable mode that you
want to use; Mobile-8 and TELKOMFlexi by using
navigation keys and then press the Save soft key.
Note: The mode’s service proveder should be
corresponding to the card’s. Unless you select
correct mode, browser and call function
cannot be operated properly.
119
Settings
Camera
Entry method
(Menu 6-7)
This menu allows you to select the default text input
mode.
Select either T9 word or ABC.
Using the camera module built into your phone, you
can take photos of people or events while on the
move. You can send photos to other people using a
message or set a photo as a wallpaper image or an
opening or closing image.
You can also record a video using the camera.
Note: You can quickly enter this menu by pressing
the Camera key ( ) on the right side of the
phone in Standby mode.
CAUTION:
• Do not take photos of people without their
permission.
• Do no take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
The camera produces JPEG photos. You can take
photos with the folder open or closed. When the
folder is closed, you can use the external display.
Note: When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
120
121
Camera
Camera
Taking a photo with the folder open
1. In Standby mode, press and hold the key on the
right side of the phone.
The image to be captured appears on the display.
2. Adjust the image by aiming the camera module at
the subject.
3. To
Press the
flip the image vertically
key.
flip the image horizontally
key.
zoom in or out
Left or Right key.
change the image
brightness
Up or Down key.
use the options
Option soft key.
See the next page.
Notes:
• When the resolution is set to High, changing the
image size is not available.
• The image size of your photo can be different when
you open it to on your PC using the PC link
programme. To view the real image size, press the
0 key in Capture mode.
4. Press the Capture soft key or the key to take
the photo.
122
5. Press the Save soft key.
To discard the photo and go back to Capture mode,
press the Cancel soft key.
6. Clear the default name using the C key, if
necessary, and enter a photo name.
For further details about entering characters, see
page 45.
7. Press the OK soft key.
The phone saves the photo in the Photo album
menu (Menu 7-3) and returns to Capture mode.
8. When you are finished, press the
return to Standby mode.
key to
Using the camera options in capture mode
When you press the Option soft key in Capture
mode, the following options are available for the
current shot:
Record video
Selecting this option switches the phone to Record
mode. See page 125.
Self timer
You can set the phone to take a picture at a
predefined time. When you press the Capture soft
key or the key, the timer appears on the bottom
line of the display and starts counting down.
123
Camera
Multi shot
This option allows you to take successive action
stills up to seven shots. Select the interval between
shots, Off, Short, Normal, or Long.
Brightness
You can adjust the brightness of the image. When
auto is selected, the phone automatically determines
the setting.
Fun frame
This option allows you to use a frame with the photo.
Press the Navigation keys to find the frame format
you want to use.
Camera
: allows you to flip the image vertically.
: allows you to adjust the brightness of the image.
: allows you to enlarge the image.
3. Press the key to take the photo.
The phone saves the photo in the Photo album
menu (Menu 7-3) and returns to Capture mode.
Take photo
(Menu 7-1)
This menu allows you to take a photo.
Resolution
You can change the image resolution, High,
Medium, Full, or Low.
Accessing this menu turns the camera on and the
display switches to Capture mode. For further details
about taking a photo, see page 121.
Taking a photo with the folder closed
1. When the folder is closed, press and hold the
key on the right side of the phone.
The image to be captured displays on the external
display.
2. Adjust the image by aiming the camera module.
To use the options, press the key until the
option icon is selected. You can change the
settings by pressing the key. The following
options are available:
Record video
(Menu 7-2)
In this menu, you can record a video that is currently
displayed on the camera screen and save it as a JPEG
file.
To record a video:
1. Accessing the Record video (Menu 7-2) menu
turns on the camera at the top of the phone.
The image to be recorded appears on the display.
2. Adjust the image by aiming the camera at the
subject.
124
125
Camera
3. To
Camera
Using the camera options in record mode
Press the
flip the image vertically
key.
flip the image horizontally
key.
When you press the Option soft key in Record mode,
the following options are available:
change the image
brightness
Up or Down key.
use the options
Option soft key.
See the next page.
4. Press the Record soft key or the
recording.
key to start
5. When you are finished, press the Stop soft key.
Or, the phone automatically stops when you have
reached the limit of available memory for a video.
6. Press the Save soft key.
To discard the video and go back to Record mode,
press the Cancel soft key.
Take picture
Selecting this option switches the phone to Capture
mode. See page 121.
Voice REC.
You can set the phone to record the audio with the
video.
Self timer
You can set the phone to start recording at a
predefined time. The timer appears on the bottom
line of the display and starts counting down.
Brightness
You can adjust the brightness of the image. When
the brightness is selected to auto, the phone
automatically determines the setting.
7. Clear the default name using the C key, if
necessary, and enter a video name.
For further details about entering characters, see
page 45.
8. Press the OK soft key.
The phone saves the video in the Video album
menu (Menu 7-4) and returns to Record mode.
9. When you are finished, press the
return to Standby mode.
126
key to
127
Camera
Photo album
Camera
(Menu 7-3)
In this menu, you can review the photos you have
taken. By default, your phone displays the first photo
you took on the full screen, Expand mode. Use the
Left and Right keys to scroll through the photos.
To view the photos as a small images, press the
Thumbnail soft key. In this mode, you can scroll
through the photos by using the Navigation keys
keys. To go back to Expand mode, press Expand soft
key.
Using the photo options
Press the Option soft key to use the following
options:
Note: The available options are different depending
on the current view mode, Thumbnail or
Expand mode.
Assign
This option allows you to set the photo as your
wallpaper for the idle screen or an image to be
displayed when you turn the phone on or off.
Rename
This option allows you to change the name of the
photo.
Lock
This option allows you to lock the photo so that other
people cannot access the photo without your lock
code.
128
Erase
This option allows you to erase the photo.
Erase all
This option allows you to erase all of the photos.
Photo info
This option shows you information about the current
photo, such as the name, time and date when it was
taken, image size and file format.
Slide show
This option shows you the photos as a slide show.
Video album
(Menu 7-4)
In this menu, you can play the video files you
recorded. When you access this menu, the still
image of the first video displays.
To play a video:
1. Press the Left or Right key to scroll to the video
you want to view.
You can use the Video options by pressing the
Option soft key. See page 130.
2. Press the Play soft key to start playing the video.
3. To stop, press the Stop soft key or C key.
4. To return to Standby mode, press the
key.
129
Camera
Using the video options
Press the Option soft key on the Video Album screen
to use the following options:
Rename
This option allows you to change the name of the
video.
Lock
This option allows you to lock the video so that other
people cannot access the video without your lock
code.
Erase
This option allows you to erase the video.
Erase all
This option allows you to erase all of the videos.
Video info
This option shows you information about the current
video, such as the name, time and date when it was
recorded, video size and file format.
Camera
Settings
(Menu 7-5)
This menu allows you to change the default settings
of the options for using the camera.
The following options are available:
Resolution: allows you to adjust the resolution of
the image. You can select either High:640X480,
Medium:320X240, Full:128X160, or Low:128X96.
Fun frames: allows you to use a frame with the
photo. Press the Navigation keys to find the frame
format you want to use.
Shutter sound: allows you select the tone that
sounds when you press the Capture soft key or the
key.
Quality: allows you to change the image quality. You
can select either Fine, Normal, or Economy.
Memory status
(Menu 7-6)
You can check the amount of the memory being used
and the memory remaining for the Camera feature.
The display shows the total, free and used space.
130
131
Wireless web
Wireless web
Navigating the Web browser
About the Web browser
Your phone comes equipped with a web browser
which makes it possible for you to access the
wireless web.
When you use the web browser, some keys on your
phone operate differently from that of a normal
phone call. These keys are explained below. The web
browser presents on-screen items in one of the
following ways:
The web browser allows you to access up-to-the
minute information through your phone. Browsing the
wireless web through your phone is unlike using your
computer; site providers have selected only critical
aspects of their sites to present to wireless phone
users and they have removed most of the graphics.
• text or numeric input
• links (embedded in content)
• numbered options (some options may not be
numbered)
• simple text
Each time you start the web browser, the phone will
connect to the wireless web and the Service icon
( ) will appear on the display. Any time this icon is
visible on the display, you are connected to the
wireless web and will be billed accordingly. Rates
vary according to your service option.
Here’s how the keys work in the Web Browser:
The web browser will end the connection after a
certain period of network inactivity and will
automatically reconnect as necessary. For this
reason, you may find that you are billed for several
network connections within a single session. This is
normal and is designed to minimize your bill.
Press the
key in Standby mode.
132
Left soft key: This is the left soft key
used to execute the commands at the
bottom left of the browser display.
Right soft key: This is the right soft key
used to execute the commands at the
bottom right of the browser display.
Cursor keys: Use these keys to move the
cursor when entering text.
Exiting the Web browser
To exit the web browser, simply press the
at any time.
Navigation keys: Use these keys to
scroll to and select browser options. You
can also use them to move the cursor
when editing text.
key
END key: This key ends the web browser
connection and returns the phone to
Standby mode.
133
Wireless web
Clear key: This key performs two important
functions:
• Sends you back in the browser. Pressing it
once sends you back one page. Pressing
and holding this key sends you back to the
homepage.
~
• Clears out entered text or numbers. When
entering characters, press this key to clear
the last number, letter or symbol. Press
and hold this key to completely clear the
input field.
Numbered keys 0 - 9: If the items on a
page are numbered, you can use these keys
to select them.
Volume keys: These keys allow you to scroll
up or down by page or change the volume
setting.
Wireless web
Bookmarks: allows you to load a bookmarked web
page directly.
Go To URL: allows you to manually enter a URL
address to access a site.
History: shows you the list of the web pages you
have visited.
Snapshots: allows you to take a “snap shot” of the
current screen.
Reload: reloads the current web page with updated
information.
Advanced...: gives you access to the following
advanced features:
- Restart Browser: restarts the browser without exiting
it.
- Delete Cookies: deletes the cookies containing user
information in your phone.
- Homepage: allows you to change the startup
homepage URL address.
Using the Web browser menu
- Multimedia: allows you to change the options related
to multimedia contents on the page.
On the web browser, you can access the following
options by pressing the
key.
- View Title Region: allows you to view or hide the
title bar.
Home: takes you back at any time to the homepage of
the wireless web service provider.
- Scroll Mode: allows you to select the display’s scroll
mode and speed for long text.
Forward: takes you one page forward in the sequence
of pages or sites you’ve already visited.
- Connection Timeout: allows you to set the duration
the browser will wait for acknowledgement after a
request is sent. If there is no response within the
specified time, the browser connection ends.
134
135
Wireless web
- Key Press Timeout: allows you to change the latency
between key presses of a single key.
- Security: gives you access to the following security
options:
Secure Prompt: displays when you are about to leave
a secure site and enter a non-secure site.
Authentication: allows you to turn authentication
caching on or off.
Current Certificate: displays the current certificate, if
one is used.
About...: displays information about the browser and
the browser version.
Entering text in the Web browser
When prompted, you can enter letters, numbers or
symbols. To change the input mode, press the right
soft key. The following modes are available:
abc: allows you to enter alphabet letters by pressing
the corresponding keys until the letter you want
display.
Sym: allows you to enter symbols.
123: allows you to enter numbers.
Health and safety
information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured so as not to exceed
the limits for exposure to radio-frequency (RF) energy,
as recommended by the EU Council. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by the
EU Council is 2.0W/kg.
The highest SAR value for this model phone was
0.789 W/kg.
word: allows you to enter English letters using T9
mode.
For further details about each mode, see page 45.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary,
depending on national reporting requirements and the
network band.
136
137
Health and safety information
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a base station, the
lower the power output of the phone.
• If left unused, a fully charged battery will
discharge itself over time.
Precautions when using batteries
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
138
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
139
Health and safety information
Health and safety information
Road safety
Electronic devices
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, make sure that you are following the special
regulations in a given area or country.
Pacemakers
Operating environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
140
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
141
Health and safety information
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Health and safety information
Potentially explosive environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Posted facilities
Switch your phone off in any facility where posted
notices require you to do so.
142
143
Health and safety information
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112, 113, 118, 199, or any
other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
144
Health and safety information
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the only
means of communication at the scene of an accident;
do not cut off the call until given permission to do so.
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
145
Health and safety information
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
146
Health and safety information
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-andwater solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
147
Glossary
Glossary
Air time - Actual time spent talking on the wireless
phone. Most carriers bill customers based on how
many minutes of airtime they use each month.
DTMF - (Dual-Tone Multi- Frequency) You send
DTMF signals when you enter numbers by pressing
the digit keys.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas is
determined, in part, by the frequency of the signal
they receive. Wireless phones and the base station
must have antennas.
EVRC - (Enhanced Variable Rate Codec) EVRC is a
new global standard for compressing and
decompressing voice signals. EVRC uses a lower bit
rate (the number of bits sent per second) than
existing CDMA vocoders, while providing significant
improvements in voice quality. This technology
enables your phone to provide superb voice quality
while benefiting from the ability to process more
cellular voice calls using less bandwidth than the
voice codecs in CDMA networks today.
Base station - The fixed radio transmitter/receiver
that maintains communications with mobile radio
telephones within a given area. (Typically called a
cell or cell site)
CDMA - (Code Division Multiple Access) A spreadspectrum approach to digital transmission. With
CDMA, each conversion is digitized and then tagged
with a code. The mobile phone deciphers only a
particular code to pick the right conversation off the
air. The transmitted signal is just above noise level
across the available bandwidth.
Channel - Communications signals transmit along
paths called channels.
Codec coder/Decorder - Compression &
decompression.
Deactivation - The process of rendering a wireless
phone inactive.
148
Frequency - A measure based on time, as one or
more waves per second, in an electrical or light wave
information signal. A signal’s frequency is stated in
cycles-per-second or Hertz (Hz).
LCD - (Liquid Crystal Display) Commonly used to
refer to the screen display on the wireless phone.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
RF - Radio Frequency
Roaming - The ability to use a wireless phone to
make and receive calls in places outside of the home
service area.
149
Glossary
Service charge - The amount paid each month to
receive wireless service.
Make a call
End a call
Receive a call
SCH-X619 Quick reference card
Record a video
+ 2 + Record/
+ Save + OK
+ Stop
Store a new
number in the
memory
Find + Up/Down+ OK
Location number + Hold the last digit
Location number + Hold
• In the UIM card
Phone number + Save + Name +
OK + Save
• In the phone’s memory
Phone number + Save + Name + OK +
Down(Storage) + Phone + Up/Down/
Left/Right (Type) + Select + Up
/Down(Name/Storage/Location/Home/
Office/Mobile/Pager/Fax//E-Mail/
E-Mail2/ETC/Load Image/Speeddial/
Group/Ringer ) + Edit and enter
information or Left/Right + Save
BASIC OPERATION
/Close the folder
Phone number +
/Open the folder
(in Standby mode)
Hold
twice/Hold
›/‚ on the left side
(during a conversation)
Adjust the key tone (in Standby mode)
›/‚ on the left side
volume
Adjust the voice
volume
Switch to
Silent mode
Hold + Navigation +
Select
Redial the last call
Quickly change
the call ringer type
Wireless - Radio-based Systems that allow
transmission of telephone or data signals through the
air without a physical connection, such as a metal
wire (copper) or fiber optic cable.
Scan memories
Speed dial
+ Save - Card
- Phone
+ 1 + Capture/
+ OK
+
Hold
Vocoder - Voice Coder. A device used to convert
speech into digital signals.
151
150
Take a photo with
the folder open
Talk time - The length of time a person can talk on a
portable or transportable wireless phone without
recharging the battery.
Take a photo with
the folder closed
Standby time - The amount of time a fully charged
wireless portable or transportable phone can be on
and idle without being in use. (See Talk Time)
Licensed by QUALCOMM Incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
152
1 : New message
2 : Inbox
3 : Outbox
4 : Erase msgs
5 : Msg setup
1:
2:
3:
4:
5:
6:
3: Messages
4: Scheduler
View month
Jump to date
Alarm set
Calculator
Today
To do list
Find
Add
Group set
My phone #
1:
2:
3:
4:
2: Phonebook
Missed
Incoming
Outgoing
Erase logs
Air time
Call forward
Call waiting
1:
2:
3:
4:
5:
6:
7:
1: Calls
1:
2:
3:
4:
5:
1:
2:
3:
4:
5:
6:
7:
1:
2:
3:
4:
5:
6:
5: Entertainment
6: Settings
7: Camera
* Available depending on your UIM card
Take photo
Record video
Photo album
Video album
Settings
Memory status
Sound
Display
Auto retry
Answer mode
Roam option
Security
Entry method
Music box
Image box
Games
MP3 player
Memory status
7 : Memo pad
8 : Countdown
9 : World time
4: Scheduler
Main Menu (To access, press the Menu soft key)
MENU TREE
Download PDF

advertising