Samsung | UA28J4000AR | Samsung 28'' HD Flat TV J4000 Series 4 User Manual

Important Safety Instructions
Getting Started
Accessories
LED TV
yy Composite (AV)
yy Component
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
recommendations:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture format menu for
best possible match.
yy Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
For India Only
This product is RoHS compliant.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking on the product & accessories literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources House hold users
should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business user should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed other commercial
wastes for disposal.
Country
SINGAPORE
AUSTRALIA
NEW
ZEALAND
VIETNAM
THAILAND
Customer Care Centre
1800-SAMSUNG(726-7864)
1300 362 603
0800 726 786
Web Site
www.samsung.com/sg/support
www.samsung.com/au/support
www.samsung.com/nz/support
1800 588 889
0-2689-3232,
1800-29-3232
MYANMAR
01-2399888
MALAYSIA
1800-88-9999
603-77137477 (Overseas
contact)
INDONESIA
021-56997777
08001128888
PHILIPPINES 1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe
landline and Mobile]
02-4222111 [Other landline]
TAIWAN
0800-329999
JAPAN
0120-363-905
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
BANGLADESH 9612300300
SRI LANKA
0094117540540
0094115900000
EGYPT
08000-726786
16580
ALGERIA
021 36 11 00
www.samsung.com/vn/support
www.samsung.com/th/support
IRAN
SAUDI
ARABIA
021-8255
920021230
PAKISTAN
TUNISIA
0800-Samsung (72678)
80-1000-12
U.A.E
SYRIA
800-SAMSUNG (800 - 726
7864)
800-SAMSUNG (800 - 726
7864)
183-CALL (183-2255)
8000-GSAM (8000-4726)
800-CALL (800-2255)
444 77 11
0800-22273
06 5777444
18252273
MOROCCO
080 100 22 55
For more information on safe disposal and recycling visit our website www.
samsung.com/in or contact our helpline number - 18002668282, 180030008282
OMAN
For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and may not be
available in all regions.
KUWAIT
BAHRAIN
QATAR
TURKEY
JORDAN
yy Warranty Card / Regulatory Guide (Not available in some locations)
yy Power Cord
Input Cables (Sold Separately)
(Please read the safety instructions below before installing and using the product.)
CAUTION
Still image warning
yy Remote Control & Batteries (AAA x 2)
yy User Manual
Warning! Important Safety Instructions
UA28J4000AR
user manual
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifications
may be changed without notice.
Connections
www.samsung.com/support
www.samsung.com/my/support
www.samsung.com/id/support
www.samsung.com/ph/support
www.samsung.com/tw/support
www.samsung.com/jp/support
www.samsung.com/in/support
www.samsung.com/in/support
www.samsung.com/support
www.samsung.com/eg/support
www.samsung.com/n_africa/
support
www.samsung.com/iran/support
www.samsung.com/sa/support
www.samsung.com/sa_en/
support (English)
www.samsung.com/pk/support
www.samsung.com/n_africa/
support
www.samsung.com/ae/support
(English)
www.samsung.com/ae_ar/
support (Arabic)
www.samsung.com/tr/support
www.samsung.com/Levant/
support (English)
www.samsung.com/Levant/
support (English)
www.samsung.com/n_africa/
support
RISK OF ELECTRIC SHOCK DO NOT OPEN
This symbol indicates that high voltage is present inside. It
is dangerous to make any kind of contact with any internal
part of this product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this
product.
yy HDMI-DVI
yy Coaxial (RF)
yy HDMI
TV Controller (Panel Key)
yy PC / DVI AUDIO IN input is not supported.
yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
yy Connecting through the HDMI cable may not be supported depending on the PC.
yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does
not work.
yy For Set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1 (STB) port.
HDMI connection
PC connection
Blu-ray player / DVD / Settop box
PC
yy The rear panel may differ
depending on the model.
Selecting the Media Play
TV Rear Panel
MEDIA.P
m
Selecting the Menu
R
s
P
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
and to protect it from overheating, these slots and openings must never be blocked or covered.
− Do not cover the slots and openings with a cloth or other materials.
− Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
− Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the
environment. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not
touch the power cord with wet hands.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact
an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
when children, elderly or disabled people will be left alone in the house).
− Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause
the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage
to your set.
• Use only a properly grounded plug and receptacle.
− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible
at all times.
• Do not allow children to hang onto the product.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the
product.
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Selecting a Source
Power off
Return
Power Input
Function menu
TV Side Panel
Remote control sensor
TV Controller
The image is drawn by facing
the front side of the TV.
✎✎ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move
the up/down/left/right directions.
Plug & Play (Initial Setup)
USB
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
or
VHF/UHF Antenna
Cable
Audio connection
(Analog)
Component connection
AV connection
Blu-ray player / DVD
VCR
DVD / Home Theater
- English -
BN68-06949B-00
-1-
-2-
How to use Edit Name
Changing the Input Source
Edit Name lets you associate a device name to an input source. To
access Edit Name, enter Support menu and select Edit Name. Name
the device connected to the input jacks to make your input source
selection easier.
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
■■ TV / AV / Component / HDMI1 / HDMI2/DVI
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you should
Mode
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
1366 x 768
IBM
720 x 400
31.469
70.087
28.322
-/+
c
640 x 480
35.000
66.667
30.240
-/-
c
c
MAC
should set the TV to DVI PC mode under Edit Name.
✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI to DVI
cable, you should set the TV to DVI mode under Edit Name.
VESA DMT
832 x 624
49.726
74.551
57.284
-/-
1152 x 870
68.681
75.062
100.000
-/-
640 x 480
31.469
59.940
25.175
-/-
c
640 x 480
37.861
72.809
31.500
-/-
c
640 x 480
37.500
75.000
31.500
-/-
c
800 x 600
37.879
60.317
40.000
+/+
c
800 x 600
48.077
72.188
50.000
+/+
c
800 x 600
46.875
75.000
49.500
+/+
c
1024 x 768
48.363
60.004
65.000
-/-
c
1024 x 768
56.476
70.069
75.000
-/-
c
1024 x 768
60.023
75.029
78.750
+/+
c
1152 x 864
67.500
75.000
108.000
+/+
1280 x 720
45.000
60.000
74.250
+/+
1280 x 800
49.702
59.810
83.500
-/+
1280 x 1024
63.981
60.020
108.000
+/+
1280 x 1024
79.976
75.025
135.000
+/+
1366 x 768
47.712
59.790
85.500
+/+
1440 x 900
55.935
59.887
106.500
-/+
1600 x 900RB
60.000
60.000
108.000
+/+
1680 x 1050
65.290
59.954
146.250
-/+
1920 x 1080
67.500
60.000
148.500
+/+
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
c
❑❑ Seeing Channels
Channel List
Select a channel in the All Channels, Added Channels screen by
pressing the ▲/▼ buttons, and pressing the ENTERE button. Then
you can watch the selected channel.
✎✎ Using the remote control buttons with the Channel List
Channel Status Display icons
Icons
Alternately select Teletext ON, Double, Mix or OFF.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
✎✎ NOTE
xxUse the remote control within 7m from TV.
xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
Changes channels.
✎✎ Lowering picture brightness reduces power consumption.
Picture Options
Auto Store
(Depending on the country)
Scans for a channel automatically and stores in the TV.
■■ Colour Tone: Select the colour temperature.
Manual Store
■■ Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
16:9: Sets the picture to 16:9 wide mode.
4:3: Sets the picture to basic (4:3) mode.
Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
size.
✎✎ Warm will be deactivated when the picture mode is Dynamic.
Turns the Soccer Mode on or off.
Quickly select frequently used functions.
right-hand side of the channel number in the channel banner.
✎✎ This is available for analogue broadcasts only.
Selects the on-screen menu items and changes the
values seen on the menu.
E-MANUAL
B
C
P.SIZE SLEEP
D
✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the
left, right and centre of the screen may cause image retention (screen burn)
which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
HDMI(720p/1080i/1080p) signals are inputted.
✎✎ NOTE
xxDepending on the input source, the picture size options may vary.
xxThe available items may differ depending on the selected mode.
xxSettings can be adjusted and stored for each external device connected to an
input on the TV.
■■ Digital Clean View: (Auto / Off / Low / Medium / High) If the
broadcast signal received by your TV is weak, you can activate the
Digital Clean View feature to reduce any static and ghosting that may
appear on the screen.
✎✎ When the signal is weak, try other options until the best picture is displayed.
✎✎ Available only in HDMI mode (RGB signals).
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i /
Use these buttons according to the direction on
screen.
1080i).
Use these buttons in a specific feature.
Set the menu language.
some countries have only one language.)
Time
✎✎ The current time will appear every time you press the INFO button.
(standard sound mode only)
■■ Balance: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■ Reset: Resets the Equalizer to its default settings.
■■ Clock Set: Set the Year, Month, Day, Hour, Minute.
■■ On Timer/Off Timer
Speaker Select
Set so that a melody plays when the TV is turned Off, Low, Medium
and High.
✎✎ Current time should be set first by Clock Set.
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
DTS TruSurround t
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
(standard sound mode only)
Contents: Select TV.
This function provides a virtual 5.1 channel surround sound experience
Channel: Select the channel to be played when the TV turns on
through a pair of speakers using HRTF (Head Related Transfer Function)
automatically.
technology.
Volume: Select the volume level when TV turns on automatically.
Auto Volume
■■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (Off, 30
Because each broadcasting station has its own signal conditions, the
min, 60 min, 90 min, 120 min, 150 min and 180 min)
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
✎✎ To cancel Sleep Timer, select Off.
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Melody
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to
External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are
minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
✎✎ When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
✎✎ If there is no video signal, both speakers will be mute.
Sound Reset
■■ Reset All: Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I-Dual II, the current sound mode is displayed on
the screen.
A2 Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
Default
Automatic
change
Dual I
Automatic
change
Dual I
■■ Motion Lighting: Reduce power consumption by brightness control
adapted motion.
✎✎ If the stereo signal is weak and an automatic switching, occurs, then switch to
■■ Analogue Clean View: Reduces diagonal noise in picture caused by
the crosstalk of signals.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
✎✎ Only available in Standard mode.
✎✎ The Melody does not play.
--When no sound is output from the TV because the volume has been reduced to
turned off. You will hear sound through the external speakers only. When you
set Speaker Select to TV Speaker, both the TV’s speakers and the external
speakers are on. You will hear sound through both.
■■ HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
■■ Film Mode: (Auto / Off) Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for
optimum quality.
Exit the menu.
A
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A “ ” beside the channel indicates the channel has been deleted.
✎✎ The Add menu only appears for deleted channels.
Fine Tune
✎✎ Fine tuned channels that have been saved are marked with an asterisk “*” on the
Displays information on the TV screen.
Returns to the previous menu.
Set each channel using the Channel List menu options (Add / Delete).
Option menu items may differ depending on the channel status.
Set each channel using the Channel List menu options. Option menu
items may differ depending on the channel status.
■■ Add / Delete: Delete or add a channel to display the channels you
want.
If the reception is clear, you do not have to fine tune the channel, as this
is done automatically during the search and store operation. If the signal
is weak or distorted, fine tune the channel manually.
Displays the main on-screen menu.
Displays the channel list on the screen.
Views the Media Play.
Equalizer
the TV.
You can change the desired area.
Channel List Option Menu
Press to directly access to channels.
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
✎✎ Settings can be adjusted and stored for each external device connected to
✎✎ According to channel source, Manual Store may be supported.
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there
Displays and selects the available video
sources.
✎✎ Press ◄ or ► button to select menu language. (According to the different areas,
Brightness and Sharpness.
is abnormal sound or no sound, reselect the sound standard required.
Turns the TV on and off.
Language
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
available.
Scans for a channel manually and stores in the TV.
Installing batteries (Battery size: AAA)
Sound Mode t
✎✎ When connecting a PC, you can only make changes to Backlight, Contrast,
❑❑ Retuning Channels
Setup Menu
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal environment.
■■ Movie: Suitable for watching movies in a dark room.
✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not
A channel deleted.
Sound Menu
Picture Mode t
Your television has several setting options for picture quality control.
Operations
Area
c
-4-
Picture Menu
Channel Menu
Optimal resolution
4 series:1366 x 768@60Hz,1600 x 900@60Hz
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI cable, you
Source List, connected inputs will be highlighted.
-3-
Display Modes (HDMI/DVI Input)
set the TV to PC mode under Edit Name.
✎✎ You can only choose external devices that are connected to the TV. In the
E-MANUAL: Not available.
P.SIZE: Selects the picture size.
SLEEP: Automatically shuts off the TV at a preset time.
yy For better picture and audio quality, connect to a digital device using an HDMI
cable.
yy The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV.
If such a problem occurs, ask the manufacturer of the external device about the
HDMI version and, if out of date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
the mono.
Picture Reset
Resets your current picture mode to its default settings.
■■ Reset Picture Mode: Returns all picture values in the currently.
-5BN68-06949B_ENG.indd
1
-6-
-7-
-82015-02-03
�� 1:22:28
POWER
P
• The TV cannot play MP3 files with DRM that have been
Support Menu
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution, and
management of digital content in an integrated and comprehensive
way, including protecting the rights and interests of content
providers, preventing illegal copying of contents, and managing
billings and settlements.
• PTP device is not supported.
• If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
• The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
• If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
• If a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
• Photos only supports sequential jpeg format.
• The scene search and thumbnail functions are not supported in
the Videos.
• If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
• The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
• The media may not be playing smoothly when using the device
higher than USB 2.0.
❑❑ Using the Media Play
Enjoy photos, music and/or movie files saved on a USB
Mass Storage Class (MSC) device.
MEDIA.P
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to
the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play.
✎✎ The maximum displayed number of partition is 4.
Using the Media Play Menu
1. Press the MENU button. Press the ▲ or ▼ button to select Support,
then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press the
ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos),
then press the ENTERE button.
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file being played, press TOOLS
button in the file list, and then select Information.
✎✎ Need-to-Know List before using Media Play (USB)
• Supported file systems are FAT and NTFS.
• Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
• Media Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. (USB HDD is not supported.) Does not support smart
devices connected in MTP or PTP protocol.
• Before connecting your device to the TV, please back up your files
to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
• A USB device that requires high power may not be supported.
(more than 0.5A)
• Do not disconnect the USB device while it is loading.
• The higher the resolution of the image, the longer it takes to
display on the screen.
• The maximum supported JPEG resolution is 15360 x 8640 pixels.
• If a file is corrupted or the TV does not support the file type, the “Not
Supported File Format” message appears.
• If a USB extension cable is used, the USB device may not be
recognized or the files on the device may not be read.
✎✎ The maximum displayed number of partition is 4.
• The file name only works in supported menu language. The other
language is not displayed properly.
■■ Videos
1. Press the ◄ or ► button to select Videos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list.
(Play) button.
3. Press the ENTERE button or
--The selected file is displayed on the top with its playing time.
--If video time information is unknown, playing time and the progress bar are not
displayed.
--During video playback, you can search using the ◄ and ► button.
--You can use ( ) (REW) and ( ) (FF) buttons during playback.
✎✎ In this mode, you can play movie clips contained in a game, but you cannot play
the game itself.
yy Supported Subtitle Formats
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Audio Decoder
--Internal
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
Container
AVI
MKV
MKV
MKV
MP4
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
yy Supported Video Formats
File
Extension
Container
*.mp4
MP4
*.avi
*.mkv
AVI
MKV
*.asf
*.wmv
ASF
*.ts
*.trp
*.tp
TS
*.dat
*.mpg
*.mpeg
*.vob
PS
*.3gp
3GPP
*.flv
flash formats
Other Restrictions
Video Decoder
--External
Video Codec
Resolution
Frame
rate(fps)
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
VC-1
1920x1080
6~30
20Mbps
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
Bit rate(Mbps)
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
MPEG2-TS
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG1
1920x1080
6~30
20Mbps
MPEG2
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
Sorenson H.263
1920x1080
6~30
20Mbps
Audio Codec
■■ Music
1. Press the ◄ or ► button to select Music, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
(Play) button.
3. Press the ENTERE button or
MP3 / ADPCM /
AAC
✎✎ During music playback, you can search using the ◄ and ► button.
✎✎ (REW) and (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 file extension. Other file extensions are not
MP3 / AC3 /
LPCM / ADPCM
/ DTS
✎✎ If the need to change Equalizer - when playing MP3, then exit Media Play, adjust
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
AC3 / AAC /
MP3 / DD+
AC3 / MPEG /
LPCM / AAC
MP3
displayed, even if they are saved on the same USB device.
the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound
problem.)
■■ Photos
1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
(Play) button.
3. Press the ENTERE button or
✎✎ NOTE
xxWhile a photo list is displayed, press the
(Play) / ENTERE button on the remote
control to start the slide show.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using (
MP3
Other Restrictions
yy Video content will not play, or not play correctly, if there is an error in the
content or the container.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yy Video content can not be played, if there are many contents in one file.
❑❑ Using the Soccer Mode
CMYK, YCCK Colour space JPEG are not supported.
■■ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
Soccer Mode t
This mode provides optimised condition for watching sports games.
Zoom: Pause playback and dived the picture into 9 parts. Select a part
to zoom it in. Press this button again to resume.
✎✎ When Soccer Mode is On, the picture and sound modes are set to Stadium
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select Deselect All.
automatically.
✎✎ If you turn the TV off while watching Soccer Mode, the Soccer Mode will be
disable.
✎✎ Mode name may vary depending on nations. Cricket Mode, Soccer Mode,
Sports Mode.
■■ Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
■■ Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Category
Operation
Title
You can move the other file directly.
Videos
Repeat Mode
You can play movie and music files repeatedly.
Picture Size
You can adjust the picture size to your preference.
Picture Mode
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
function only works if the subtitles are the same
file name as the video.
You can change the audio language if the video
Audio language
has more than one language.
Stop Slide
Show / Start
You can start or stop a Slide Show.
Slide Show
Slide Show
You can select the slide show speed during the
slide show.
Speed
Background
You can set and select background music
Music
when watching a Slide Show.
Subtitle
Settings
c
c
c
c
c
❑❑ Software Upgrade
Software Upgrade can be performed by downloading the latest firmware
from “www.samsung.com” to a USB memory device.
Music
Photos
c
c
c
c
❑❑ DivX® Video On Demand
✎✎ For more information on DivX® VOD, visit http://vod.divx.com.
You can read a guide to connect external devices for HD sources.
c
c
❑❑ Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the played file.
c
c
✎✎ Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. We do not advice you
to do it yourself.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you select to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎ The wall mount kit is not supplied, but sold separately.
✎✎ Install your wall mount on a solid wall perpendicular to the floor. When attaching
to other building materials, please contact your nearest dealer. If you install the
TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ NOTE
• Standard dimensions for wall mount kits are shown in the table
Shows the registration code authorized for the TV. If you connect to
the DivX web site and register with 10-digit registration code, you can
download the VOD activation file. Once you play it using Media Play, the
registration is completed.
❑❑ HD Connection Guide
c
To prevent the TV from falling
Other Information
c
below.
and all parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard
screw specifications.
• Do not use screws longer than the standard dimension, as they
may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV on a wall.
Product
Family
Models
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
LED-TV
UA28J4000
100 X 100
M4
4
✎✎ Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎✎ Note
xxInstall the TV near to the wall so that it does not fall backwards.
xxIt is safe to connect the string so that the clamps fixed on the wall are equal to
or lower than the clamps fixed on the TV.
xxUntie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is beside the
“K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
supplied with the locking device.
✎✎ The Mode in Background Music cannot be changed until the BGM has finished
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
loading.
yy Supported Photo Formats
Photo
Base-line
Progressive
purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the TV model.
automatically played during the Slide Show if the Background Music is set to On.
JPEG
wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please
✎✎ These are general instructions. For exact instructions, see the User manual
xxYou can move to other file using ◄ or ► button.
✎✎ Press TOOLS button and select Background Music. Music files can be
Image
✎✎ You may need additional material such as an anchor depending on the type of
• When purchasing our wall mount kit, a detailed installation manual
) (REW) or (
) (FF) button.
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
Resolution
15360 x 8704
1024 x 768
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
-9Troubleshooting
- 10 Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
Problem
The TV is not receiving all channels.
yy If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
yy Antenna connection: Try HD stations after performing Auto tuning.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
yy Adjust the Cable/Set top box video output resolution to 1080i or 720p.
yy Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
yy Low signal level or bad quality can cause picture distortion. This is not a TV issue.
yy Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
yy If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
yy Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
yy Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
yy If the picture size is set to Screen Fit, change it to 16:9.
yy Change cable/satellite box resolution.
The picture is black and white.
yy If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
yy If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
yy Set the output resolution of the cable box to 1080i or 720p.
The picture is distorted: macroblock error,
small block, dots, pixelization
PC Connection
A “Mode Not Supported” message
appears.
yy Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
yy If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture will not display in full screen.
yy Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message
appears.
yy Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
yy This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
yy Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
base.
yy Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
(unavailable).
yy The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or
every time the TV is turned off.
yy If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
from Store Demo mode to Home Use.
yy Check the cable connections. Make sure a video cable is not connected to an audio input.
yy For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
You have intermittent loss of audio or video.
yy Check the cable connections and reconnect them.
yy Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
yy Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
yy Make sure the wall outlet is working.
yy Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
You see small particles when you look
closely at the edge of the frame of the TV.
yy This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
yy Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
yy To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
The picture is good but there is no sound.
yy Set the Speaker Select option to TV Speaker in the sound menu.
yy If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
yy If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
yy If you are using a HDMI cable, a separate audio cable is required.
yy If your TV has a headphone jack, make sure there is nothing plugged into it.
No Picture, No Video
The TV will not turn on.
The TV turns off automatically.
There is no picture/video.
yy HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
yy Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
yy Adjust the picture size options on your external device or TV to full screen.
The cable/set top box remote control does
not turn the TV on or off, or adjust the
volume.
There is no sound or the sound is too low at
maximum volume.
yy Ensure the Sleep Timer is set to Off in the Time menu.
yy If your PC is connected to the TV, check your PC power settings.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
yy When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
yy Check cable connections (remove and reconnect all cables connected to the TV and external devices).
yy Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
yy Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
yy A low signal can cause picture distortion. This is not a TV issue.
yy Replace the remote control batteries with the poles (+/–) in the right direction.
yy Clean the transmission window located on the top of the remote control.
yy Try pointing the remote directly at the TV from 5~6 feet away.
yy Please check the volume of external device connected to your TV.
The speakers are making an inappropriate
noise.
yy Make sure the Antenna cable is connected securely.
yy Please try Setup (Plug & Play) to add available channels to the channel list. Go to MENU - System - Setup (Plug & Play) and
The remote control does not work.
Sound Quality
Specifications
wait for all available channels to be stored.
yy Verify the Antenna is positioned correctly.
Picture Quality
The TV image does not look as good as it
did in the store.
- 12 -
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Possible Solution
RF(Cable/Antenna) Connection
Possible Solution
- 11 -
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
Model Name
UA28J4000
Display Resolution
1366 x 768
Screen Size
69 cm
Securing the Installation Space
Sound Output
5W x 2
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Dimensions (W x H x D)
Body
With stand
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xxIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
10 cm
10 cm
10 cm
64.3 x 39.6 x 6.2 cm
64.3 x 43.8 x 15.1 cm
Weight
Without Stand
With stand
Installation with a wall-mount.
10 cm
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
10 cm
10 cm
3.7 kg
4.0 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
10 cm
Licence
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 720p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the
Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. ⓒ DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
Recommendation - Jordan Only
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
- 13 BN68-06949B_ENG.indd
2
- 14-
- 15 -
- 16 2015-02-03
�� 1:22:30
Download PDF

advertising