Samsung | CS21D850F6 | Samsung CS21D850F6 User Manual

COLOR TELEVISION
Rear Panel
Connecting to the RCA Input
CS21Z43/21Z45/21Z47/21Z50/21Z57/
21Z58/21AE0/21AF0/21AJ0/21AD0/
21BA0/21AS0/21BF0/21BH0/21BE0/
21BM0/21AB0/21C540/21CC0
or
Owner’s Instructions
cable television
network
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
The RCA3 and RCA4 connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video
game device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a
DVD with component output.
Front (or Side) Panel
Audio input
Control Panel (depending on the model)
or
The actual configuration of your TV may be different,
depending on your model.
➢
Video input
Headphone jack
cable television
network
Front (or Side) Panel
Audio input
Video input
or
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Standby indicator
Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Connection Panel (depending on the model)
The actual configuration of your TV may be different,
depending on your model.
➢
cable television
network
✽ : DVD Input and RCA Output cannot be used at
the same time.
☛ Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
continued...
English - 1
AA68-04054A-Eng.indd 1
☛ Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
program without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
Front (or Side)AV also can be used for component audio
input.
➢
➢
AA68-04121B-00
2010-01-28 �� 1:57:05
Remote Control (depending on the model)
Front (or Side) Panel
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
1
1
2
2
3
1
1
2
2
/
EASY VIEW
3
1
1
2
3
2
BN59-00960A
1 Audio input
2 Video input
3 Headphone jack
Connecting to the RCA Input
The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors
are used for equipment, such as a camcorder, video disc
player, or video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
program without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
1 POWER
Used to switch the TV
on and off.
2 MENU
Used to display the onscreen menu or return
to the previous menu.
3 ▲/▼/◄/►
Used to control the
cursor in the menu.
➢
AA68-04121A-Eng.indd 2
P</>
Used to display the
next or previous stored
channel
=+/Used to increase or
decrease the volume.
➢ When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
Front (or Side) AV also can be used for component audio
input.
4 MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
= + or = - button.
5 Numeric buttons
Used to select channels
directly.
6 INFO
Used to view the
channel information
and setting status you
selected.
7 SOURCE
Used to display all of
the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing Tools button.
1. Sleep Timer
(Used to select a
preset time interval
for automatic turn
off.)
2. Picture Mode
(Used to select the
picture effect.)
3. Sound Mode
(Used to select sound
effect.)
4. Dual I-II (Used to
select sound mode.)
5. Turbo Plus (Used to
select the Turbo Plus
option.)
6. Sound
Adjust
(Used to display the
sound menu)
7. Easy
View
Used to display
Channel Grouping,
Channel
Minimizer,
Channel Scheduler,
Music Mode, Half
Mute menu.
9 ENTER
While using the onscreen menus, press
the ENTER button to
activate (or change) a
particular item.
0 EXIT/EASY VIEW
Used to exit from any
display or return to
normal viewing.
Without any On-ScreenDisplay, press this button
to enter Easy View function interface.
! PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
➢
continued...
English - 2
2010-10-28 �� 1:55:57
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2
Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4
Press the ▲/▼/◄/► button to change the selected
items. Press the MENU button to return to the previous
menu.
5
3
Press the ▲ or ▼ button to
select your area. Press the
ENTER button.
5
To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
If the television is in standby
Plug & Play
mode, press the POWER
Start Plug & Play.
button on the remote control.
OK
The Start Plug & Play is
Enter
Exit
displayed. To start Plug
& Play, press the ENTER
button. The Language menu
is displayed.
The Language menu will automatically appear after
several seconds, even if the
ENTER button is not pressed.
➢
2
Select the appropriated
language by pressing the
▲ or ▼ button. Press the
ENTER button. The Check
antenna input. is displayed.
If any language is not
selected, the language
menu will disappear about
30 seconds later.
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
4
Press the EXIT button to exit from the menu.
1
Input Source List (depending on the model)
Plug & Play
7
Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method:
MENU ➜ ▲/▼ (Setup) ➜
ENTER ➜ ▲/▼ (Plug & Play)
➜ ENTER
Language
English
Indonesia
Melayu
➢
Enter
OK
Enter
Skip
Plug & Play
Area
Asia/W.Europe
South Africa
CIS/E.Europe
America
China
Hong Kong/UK
Australia
NZL/Indonesia
Move
Enter
Skip
Plug & Play
Source List
TV
◆ Source List
TV
You can switch between
AV1
viewing signal from
AV2
Component
connected equipment,
such as a VCR, DVD, settop box, and the TV source
Move
Enter
Return
(broadcast or cable).
You can change the required source simply by
pressing the SOURCE button on the remote control.
It might take a short period of time for pictures to be
switched.
➢
Auto Store
Start
Enter
Skip
Plug & Play
Auto Store
P 1 C--
102MHz
7%
Channel - Auto Store
Stop
Enter
Skip
Plug & Play
Clock Set
1 2 : 0 0 am
Move
Adjust
Enter
Skip
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
program numbers may not correspond to actual or desired
program numbers. However you can sort numbers manually
and clear any channels you do not wish to watch.
Enjoy your watching.
OK
Setup
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen
: On
Melody
: On
Music Mode
: Off
Move
Plug & Play
Move
Check antenna input.
Enter







Return
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The program originally
selected is then displayed.
To stop the search before
it has finished, press the
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
“Channel - Sort”. To exit without
sorting, press the EXIT button.
➢
Auto Store
TV
Area
Search
Move
: Belgie
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Enter
Return
Search
P 1 C-- 102MHz
7%
Stop
Enter
Return
Skip
continued...
English - 3
AA68-04054A-Eng.indd 3
2010-01-28 �� 1:57:07
Channel - Sort
This operation allows you to
change the program numbers of
stored channels. This operation
may be necessary after using
auto store.
Channel - Channel Grouping
Sort
TV
From
To
Store
:P1
: P-: ?
Adjust
◆ From: Channel number to
Move
Return
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Manual Store (depending on the model)
Manual Store
TV You can store channels,
Program
: P 3
including those received via
Sound System : BG

cable networks. When storing
Search
: 46MHz
Channel
:C1
channels manually, you can
Store
: ?
choose:
- Whether or not to store each
Adjust
Move
Return
of the channels found
- The program number of
each stored channel which you wish to identify
◆ Program (Program number to be assigned to a channel)
◆ Sound System: BG/DK/I
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored)
You can also select the channel number directly by
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
program number)
If there is no sound or abnormal sound, re-select the
sound standard required.
➢
➢
continued...
mode
☛ Channel
◆ P (Program mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99.
You can select a channel by entering the position
number in this mode.
◆ C (Real channel mode): You can select a channel
by entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel
by entering the assigned number for each cable
channel in this mode.
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sport, and User.
Method:
▲/▼ : Used to select a program.
◄/► : Used to select the desired
channel group.
▲/▼ : Used to confirm the new
choice.
Group Select
: Sport
Set Channel Group
Move
Adjust


Return
Set Channel Group
Movie Music News Sport User
P1
P2
P3
P4
P5
P6
P7
P8
Move
➢You can press TOOLS
Adjust
Return
or EASY VIEW button on remote control and enter Easy View
to use this function.
Channel - Add/Delete
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to
skip are not displayed. All of
the channels that you did not
specifically choose to skip are
displayed during scanning.
Channel Grouping
TV
Add/Delete
TV
 More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
 More
Move
Enter
Channel - LNA
Return
Method:
ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
Fine Tune
◄/►: You can obtain a sharp
P 1
and clear picture and good
Reset
sound quality.
Move
Save
▲/▼ ➜ ENTER : You can reset
Adjust
Return
the setting.
ENTER : You can memorise adjusted picture or sound.
0
(depending on the model)
When a weak broadcast signal
causes an unclear, noisy picture,
the “LNA” feature improves
the picture quality by setting to
“On”. If you experience noise
on a certain noise on a certain
channel, set the “LNA” to “On” or
“Off” for this channel, to obtain
the optimum picture.
TV
Channel
Auto Store
Manual Store
Add/Delete
Fine Tune
Sort
Set Channel Group
LNA
: On
Move
Enter







Return
Method:
ENTER : On/Off
Setup - Time
◆ Clock
You can set the television
clock so that the current
time is displayed when
pressing the INFO button
on the remote control. You
must also set the time if you
wish to use the automatic on
or off timers.
Time
TV
12:00 am
Clock
Sleep Timer
: Off
Scheduler
Move
Enter

Return
continued...
English - 4
AA68-04054A-Eng.indd 4
2010-01-28 �� 1:57:07
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
You can also press the
TOOLS button to enter
Scheduler
TV
Sleep Timer.
P On Time Off Time Set
➢
1. -- -- : -- am -- : -- am No
2. -- -- : -- am -- : -- am No
◆ Scheduler
3. -- -- : -- am -- : -- am No
You can set the scheduler
4. -- -- : -- am -- : -- am No
5. -- -- : -- am -- : -- am No
to make the TV return to a
On Timer Volume
20
particular channel at a preMove
Enter
Return
set time.
Upto 5 Programs can be scheduled at a time.
If the Clock is not set in the Time menu, a pop-up
warning will flash if user tries to enter Scheduler.
You can also use the TOOLS or EASY VIEW button
on remote control and enter Easy View to use this function.
➢
➢
➢
◆ On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
Method:
◄/► : Move to the hour, minute or am/pm.
▲/▼ : Used to set hour, minute or am/pm.
▲/▼ ➜ ENTER : Set option of YES/NO to activate/
deactivate the operation.
☛ You must set the clock first.
☛ Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating, which may
occur if a TV is on for too long.
Setup - Child Lock
Child Lock
TV
This feature allows you to
Child Lock
: On

prevent unauthorized users,
:P1
Program
such as children, from watching
: ?
Lock
unsuitable programs by muting
out video and audio. Child Lock
cannot be released using front (or
Move
Enter
Return
side) panel buttons. Only remote
control can release the Child
Lock setting, so keep the remote control away from children.
Picture - Mode
Mode
◆ Mode: Dynamic/ Standard/ TV
Mode
: Dynamic

Movie/Custom
Contrast
:
100
You can select the type
Brightness
:
50
Sharpness
:
75
of picture which best
Color
:
50
Tint
: G 50
R 50
corresponds to your viewing
Color Tone
: Cool1

Reset
requirements.

Move
Adjust
Return
You can select these
options simply by
pressing the TOOLS button on the remote control
and enter Picture Mode.
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Program: Channel number to be locked.
◆ Lock: When press the ENTER button, the Locked is
displayed.
➢
any channel is locked, you cannot access to the
➢ IfChannel
and Child Lock menu by using the control
buttons on the TV panel (the Not available is displayed
in the Child Lock menu). You can access by using the
remote control only.
◆ Contrast/Brightness/Sharpness/Color/Tint(NTSC
only)
The television has several settings which allow you to
control the picture quality.
Setup Language / Blue Screen / Melody /
Music Mode
◆ Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select
the language which will be
used for displaying menus
and indications.
◆ Color Tone: Cool2/Cool1/Normal/Warm1/ Warm2
Setup
TV
Plug & Play
Language
: English
Time
Child Lock
Blue Screen : On
Melody
: On
Music Mode : Off
Move
Enter







◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Exit
◆ Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
◆ Melody
You can hear melody sound when the television is
powered on or off.
◆ Music Mode
You can listen to the music/audio with no video or visual
distraction.
W
hen Music Mode is selected, only music is audible
and no picture is visible and seen the music mode
on screen.
➢
can also press TOOLS or EASY VIEW button on remote
➢You
control and enter Easy View to use this function.
Picture - Digital NR / DNIe
◆ Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
Picture
TV
Mode
: Dynamic
Digital NR
: Off
DNIe : Off
Move
Enter



Exit
◆ DNIe
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer,much detailed image to you.
DNIe technology will fit every signals into your eyes.
English - 5
AA68-04054A-Eng.indd 5
2010-01-28 �� 1:57:08
Sound Mode / Equalizer / Auto Volume/
Pseudo Stereo / Turbo Plus / Half Mute
Sound
TV
◆ Mode: Standard/Music /
Mode
: Music

Movie/Speech/Custom
Equalizer

You can select the type of
Auto Volume
: Off

Pseudo Stereo
: Off

special sound effect to be
Turbo Plus
: Off

used when watching a given
Half Mute
: On

broadcast.
Move
Enter
Exit
You can select these
options simply by pressing the TOOLS button on the
remote control and enter Sound Mode.
◆ Half Mute
You can reduce volume to half and control volume even
in the mute mode.
When you click the “mute” button once to activate
Half Mute see half mute ( ) on screen, twice for
Full Mute see full mute icon ( ) on screen.
You can also press TOOLS or EASY VIEW button
on remote control and enter Easy View to use this function.
➢
➢
To delete a Channel
You can delete the channel in Channel Minimizer by
pressing ▼ button.
◆ NICAM Stereo
➢
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
Y
ou can also simply press the TOOLS button to
enter Equalizer.
➢
➢
◆ Auto Volume
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
You can change the options simply by pressing the
TOOLS button and enter Turbo Plus.
➢
Selecting the Sound Mode
(depending on the model)
Pressing TOOLS button to enter DUAL I-II controls the
processing and output of the audio signal. When power is
switched on, the mode is automatically preset to either
“Dual-I ” or “Stereo”, depending on the current transmission.
To add a Channel.
You can go to your favorite
channel you wish to add to
Channel Minimizer.
Scroll
P14
P20
Scroll





Enter
Select
P35
Select
Method:
▲ : Add the present channel to Channel Minimizer.
Repeat the process to add upto six channels.
Mono
(Normal use)
Regular +
NICAM Mono
Mono
NICAM
↔
Mono
(Normal)
NICAM Stereo
Stereo
NICAM
↔
Mono
(Normal)
Exit
 Delete
Dual-I
Dual-II
Mono
NICAM ↔ NICAM ↔ (Normal)
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono
(Normal)
Bilingual or Dual-I/II
Dual-I ↔ Dual-II
Stereo
Easy View
Move
Regular broadcast
(Standard audio)
◆ A2 Stereo
Easy view is a combination of Video&Audio features that
make TV viewing much easier.
You can press TOOLS button and enter Easy View.
Channel Grouping
Channel Minimizer
Channel Scheduler
Music Mode
Half Mute
On-screen indication
NICAM Dual-I/II
Easy View - Channel Minimizer
Channel Minimizer is a feature
that offers freedom in the
number of channels that you can
watch at any time!
Type of broadcast
Stereo
↔
Mono
(Forced mono)
the receiving conditions deteriorate, listening will be
➢ ◆Ifeasier
if the mode is set to the Mono.
◆If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the TOOLS button and
enter DUAL I-II.
 Delete
➢
continued...
continued...
English - 6
AA68-04054A-Eng.indd 6
2010-01-28 �� 1:57:08
Teletext Feature (depending on the model)
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
☛ For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
(index)
1
Used to display the index (contents) page at any time while
you are viewing teletext.
2 Colored buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company,
the different topics covered on a teletext page are colorcoded and can be selected by pressing the colored buttons.
Press one of them corresponding to the required. The page is
displayed with other colored information that can be selected
in the same way. To display the previous or next page, press
the corresponding colored button.
(reveal)
3
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
(teletext on/mix)
4
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it again to overlap the
teletext with the current broadcasting screen.
(hold)
5
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
(store)
6
Used to store the teletext pages.
(page up)
7
Used to display the next teletext page.
(page down)
8
Used to display the previous teletext page.
(cancel)
9
Used to display the broadcast when searching for a page.
(sub-page)
0
Used to display the available sub-page.
(mode)
!
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page into
list using the
(store) button.
(size)
@
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
Troubleshooting
Before contacting the Samsung after-sales service, perform
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the “P” button (On/
Off) and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is
affecting the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of
your aerial. This interference often occurs due to the
use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
A still image may cause color distortion, but with
normal sound(white or highlight image).
◆ Switch to other channels with moving image, and
check if the color turns normal after 5 minutes.
◆ Turn off the TV, and turn it on after 30 minutes to
check the color.
English - 7
AA68-04054A-Eng.indd 7
2010-01-28 �� 1:57:10
OSD Map
Input
✽ : It is variable depending on the model.
-Source List ✽
- TV / AV1 / AV2 / Component
Picture
-Mode
- Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
Color Tone - Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset
-Digital NR
- Off / On
-DNIe
- Off / On
Sound
-Mode
-Equalizer
-Auto Volume
-Pseudo Stereo
-Turbo Plus
-Half Mute - Standard / Music / Movie / Speech / Custom
- Off / On
- Off / On
- Off / On
- Off / On
Channel
-Auto Store
- Area ✽ - Asia/W.Europe / CIS/E.Europe / China / Hong Kong / UK
/ Australia / NZL / Indonesia / South Africa / America
- Search
-Manual Store
- Program
- Sound System ✽ - BG / DK / I
- Search
- Channel
- Store
-Add/Delete
-Fine Tune
-Sort
-Channel Grouping - Group Select
- Set Channel Group
-LNA ✽
- Off / On
Setup
-Plug & Play
-Language ✽
-Time
-Child Lock
-Blue Screen
-Melody
-Music Mode
- Clock
- Sleep Timer
- Scheduler
- Child Lock
- Program
- Lock
- Off / On
- Off / On
- Off / On
Important Warranty Information
Regarding Television Format Viewing
Standard screen format televisions (4:3, the aspect
ratio of the screen width to height) are primarily
designed to view standard format full-motion video.
The images displayed on them should primarily be in
the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide
screen pictures), should be limited to no more than
15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio
of the screen width to height) are primarily designed
to view wide screen format full-motion video. The
images displayed on them should primarily be in
the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature, and
constantly moving. Displaying stationary graphics
and images on screen, such as the dark side-bars on
non-expanded standard format television video and
programing, should be limited to no more than 15% of
the total television viewing per week.
Additionally, viewing other stationary images and text
such as stock market reports, video game displays,
station logos, web sites or computer graphics and
patterns, should be limited as described above for
all televisions. Displaying any stationary images
that exceed the above guidelines can cause uneven
aging of picture tubes (CRTs) that leave subtle, but
permanent burned-in ghost images in the television
picture. To avoid this, vary the programing and
images, and primarily display full screen moving
images, not stationary patterns or dark bars.
On television models that offer picture sizing features,
use these controls to view the different formats as a
full screen picture.
Be careful in the selection and duration of television
formats used for viewing. Uneven CRT aging as a
result of format selection and use, as well as other
burned-in images, is not covered by your Samsung
limited warranty.
English - 8
AA68-04054A-Eng.indd 8
2010-01-28 �� 1:57:10
Download PDF

advertising