Samsung | QB55N | Samsung QB55N Quick start guide

Ports
Quick Setup Guide
1Connect to a USB memory device.
‐‐The USB ports on the product accept a maximum constant
current of 1.0A. If the maximum value is exceeded, USB ports
may not work.
1
2Connects to MDC using a LAN cable. (10/100 Mbps)
QB43N QB49N QB55N QB65N QB75N
2
3Connects to MDC using an RS232C adapter.
3
4DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the
DP-DVI cable.
5Connects to a source device using a HDMI cable or HDMI-DVI
cable.
4
7
8
6Connect to a USB memory device.
‐‐The USB ports on the product accept a maximum constant
current of 0.5A. If the maximum value is exceeded, USB ports
may not work.
7Receives sound from a source device via an audio cable.
8Outputs sound to an audio device via an audio cable.
−−Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than
16 hours a day, the warranty may be void.
−−The colour and the appearance may differ depending on the product, and the content in the manual is
subject to change without prior notice to improve the performance.
−−Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
5
9Connects to an external IR cable that receives signals from the
remote control.
6
0Connects to MDC using an RS232C adapter.
9
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
0
BN68-09133E-00
Parts
Checking the Components
Troubleshooting Guide
Contact the vendor where you purchased the product if any
components are missing.
The pictures may look different from the actual components.
Quick Setup Guide
Warranty card
(Not available in
some locations)
1
Issues
No Signal is
displayed on the
screen.
MagicInfo Software
DVD
HOLDER-CABLE
(Supported models:
QB65N, QB75N)
BN68-09133E-00_QSG_QBN_INDIA_ENG.indd 1
Holder-Ring X 4
The product is in power-saving mode.
Check that the product is connected
correctly with a cable.
There is no image
on the screen and
the power indicator
blinks every 0.5 to 1
second.
Check that the device connected to the
product is powered on.
The remote control
does not work.
Make sure that the batteries are correctly in
place (+/-).
1Remote sensor
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
‐‐Using other display devices in the same space as the remote
control of this product can cause the other display devices to
be inadvertently controlled.
2Power indicator
3Power button
Turns the product on or off.
The images on
the screen look
distorted.
The screen appears
unstable and shaky.
Check the cable connection to the product.
Check that the resolution and frequency of
the PC and graphics card are set within a
range compatible with the product. Then,
There are shadows or change the screen settings if required by
ghost images left on referring to ‘Preset Timing Modes’.
the screen.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
Remote Control
Speaker
RS232C(IN) adapter
Solutions
Depending on the type of external device,
the screen may not display properly. In this
case, connect it with the HDMI Hot Plug
function turned On.
3
Not Optimum Mode
is displayed.
Batteries (AAA X 2)
(Not available in
some locations)
Issues
The screen keeps
Check that the cable between the product
switching on and off. and the PC is connected correctly.
2
Power cord
Solutions
Check for any special lighting or neon signs
switched on in the vicinity.
A beeping sound is
If a beeping sound is heard when your PC is
heard when my PC is booting, have your PC serviced.
booting.
When I try to change
the PC resolution,
a message The
defined resolution
is not supported.
appears.
The message The defined resolution is
not supported. appears if the input source
resolution exceeds the maximum resolution
of the display.
To resolve the issue, change the PC
resolution to a resolution supported on the
display.
2018-05-04 오전 8:56:02
HDMI IN
HDMI
DP IN IN
Connecting to a PC
DVI/HDMI/AUDIO IN
Connecting the LAN Cable
DVI/MAGICINFO IN
Model Name
DP IN
HDMI IN
HDMI IN
HDMI IN
DVI/HDMI AUDIO IN
RJ45
QB43N
QB49N
QB55N
Size
107.9 cm
123.2 cm
138.7 cm
Display area
941.184 mm (H) x 529.416 mm (V)
1073.78 mm (H) x 604.0 mm (V)
1209.6 mm (H) x 680.4 mm (V)
Panel
HDMI IN
Use
Cat7(*STP Type) cable for the connection. (10/100 Mbps)
AUDIO OUT
*Shielded Twist Pair
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
DP IN
DP
IN IN
HDMI
DVI/HDMI AUDIO IN
Specifications
Model Name
QB65N
QB75N
Size
163.9 cm
189.3 cm
Display area
1428.48 mm (H) x 803.52 mm (V)
1650.24 mm (H) x 928.26 mm (V)
Panel
RS232C IN
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Power Supply
HDMI IN
HDMI
HDMI IN
IN
DP IN
AUDIO OUT
HDMI IN
HDMI IN
DVI/HDMI AUDIO IN
DVI/HDMI
HDMI IN AUDIO IN
DVI/HDMI AUDIO IN
DP IN
Connecting to MDC
RS232C OUT
Operating
Temperature : 0 °C – 40 °C (32 °F – 104 °F)
Humidity : 10% – 80%, non-condensing
Storage
Temperature : -20 °C – 45 °C (-4 °F – 113 °F)
Humidity : 5% – 95%, non-condensing
Environmental
considerations
RS232C IN
RJ45
- This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
- For detailed device specifications, visit the Samsung Electronics website.
- The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
* Accessory cables: signal cables and power cords
RS232C OUT
RS232C OUT
DVI/HDMI AUDIO IN
DVI/MAGICINFO IN
HDMI IN
DVI/HDMI
HDMI
IN AUDIO IN
Connecting to a Video Device
HDMI IN
HDMI IN
DVI/MAGICINFO IN
HDMI IN
HDMI IN
DVI/HDMI AUDIO IN
DVI/HDMI
AUDIO
DVI/HDMI
AUDIO IN
IN
AUDIO
DP IN OUT
DP IN
AUDIO OUT
DVI/MAGICINFO IN
DVI/MAGICINFO IN
HDMI IN
DVI/HDMI
HDMI
IN AUDIO IN
HDMI IN
RJ45
RJ45
RS232C OUT
RS232C IN
HUB
RS232C OUT
RS232C IN
RJ45
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
HUB
RISK OF ELECTRIC SHOCK DO NOT OPEN
RJ45
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
RS232C IN
OUT
RS232C
»» If your equipment uses an AC adapter:
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
AUDIO OUT
AUDIO OUT
DVI/HDMI
DVI/HDMI AUDIO
AUDIO IN
IN
Connecting to an Audio System
DVI/MAGICINFO IN
HDMI IN
AUDIO OUT
HDMI IN
DVI/HDMI AUDIO IN
AUDIO OUT
DVI/HDMI AUDIO IN
DVI/MAGICINFO IN
CAUTION
RJ45
HUB
For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
RS232C IN
- Only use the AC adapter with your product by
Samsung.
- Do not use the power cord with other products.
»» Do not install this equipment in a confined space such as a case
or similar.
»» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
»» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
»» Do not place a water containing vessel (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
»» The apparatus must be connected to an earthed MAINS socketoutlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
»» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
»» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
DVI/MAGICINFO IN
BN68-09133E-00_QSG_QBN_INDIA_ENG.indd 2
2018-05-04 오전 8:56:05
Download PDF