Samsung | OM46D-W | Samsung OM46D-W Quick start guide

Reverse Side
N The OM**D-K model does not come with a BACK-COVER.
1 Receives the remote control signal via the external sensor board
and outputs the signal via LOOP OUT.
OM46D
OM55D
1
Quick Setup Guide
2 Supplies power to the external sensor board or receives the light
sensor signal.
2
OM46D-W OM55D-W OM75D-W
OM46D-K OM55D-K OM75D-K
%
3 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI
cable.
3
MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI
cable.
OM75D
#
4 Connects to a source device using an HDMI cable.
5 Connects to a PC using a DP cable.
4
6 Connects to a source device using a D-SUB cable.
7 Connects to another product using a DP cable.
5
8 Connects to a source device using the AV/Component adapter.
$
6
The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
@ Connect to a USB memory device.
9
External sensor KIT
N Contact the vendor where you purchased the product if any
components are missing.
N The external sensor is integrated with the remote control sensor, light
sensor and power indicator.
If mounting the display onto a wall, you can move the External sensor
KIT to the side of the display.
N The OM**D-K model does not come with a BACK-COVER.
OM46D OM55D
% Connect network boxes to the indicated areas
!
Troubleshooting Guide
OM75D
Issues
Solutions
Issues
The screen keeps
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
The screen is too bright.
Adjust Brightness and Contrast.
The screen is too dark.
No Signal is displayed
on the screen.
Check that the product is connected correctly
with a cable.
Check that the device connected to the
product is powered on.
Regulatory guide
Not Optimum Mode
is displayed.
MagicInfo Software DVD
-
+
-
Remote Control
The images on the
screen look distorted.
123
Power cord
Holder-Ring (4EA)
D-SUB cable
External remote control sensor
The screen is not clear.
The screen is blurry.
1 Light sensor
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
2 Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
3 Power indicator
Turns off in power-on mode and blinks green in power-saving mode.
OMD_INDIA_QSG_BN68-06814J-01.indd 1
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
+
Batteries
(Not available in some locations)
# Connects to MDC using an RS232C cable.
$ Connect to an SD memory card.
@
Checking the Components
Warranty card
(Not available in some locations)
! Connects to MDC using a LAN cable.
0
BN68-06814J-01
Quick Setup Guide
0 Receives sound from a PC via an audio cable.
7
8
9 Connects to the audio of a source device.
Check the cable connection to the product.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or
ghost images left on the screen settings if required by referring to the
Additional Information on the product menu
screen.
and the Standard Signal Mode Table.
Solutions
Screen colour is
inconsistent.
Go to Picture and adjust the Colour Space
settings.
White does not really
look white.
Go to Picture and adjust the White
Balance settings.
There is no image on
the screen and the
power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Check the volume.
The remote control does Make sure that the batteries are correctly in
not work.
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
2016-05-17 오후 5:06:58
Connecting to a PC
Connecting to a Video Device
N The OM**D-K model does not have internal speakers. To enable audio, connect an external
sound output device to the AUDIO OUT port.
N The OM**D-K model does not have internal speakers. To enable audio, connect an external
sound output device to the AUDIO OUT port.
RGB IN
AV / COMPONENT IN
AUDIO IN
Specifications
Model Name
Size (cm)
Panel
Display area
(H x V) (mm)
Dimensions (W x H x D) (mm)
Weight (kg)
Model Name
AUDIO IN
Size (cm)
Panel
Display area
(H x V) (mm)
Dimensions (W x H x D) (mm)
Weight (kg)
DVI IN (MAGICINFO)
AV / COMPONENT IN
Synchronization
AUDIO IN
Resolution
AUDIO IN
HDMI IN 1, HDMI IN 2
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Optimum
Resolution (Hz)
Maximum
Resolution (Hz)
Power Supply
Environmental
considerations
HDMI IN 1, HDMI IN 2
AUDIO IN
Operating
Storage
OM46D-W
116
OM55D-W
138
OM75D-W
189
1018.08 x 572.67
1209.6 x 680.4
1650.24 x 928.26
1035.9 x 590.5 x 139
18.6
1227.4 x 698.2 x 139.5 1675.8 x 953.8 x 126.6
24.0
49.3
OM46D-K
116
OM55D-K
138
OM75D-K
189
1018.08 x 572.67
1209.6 x 680.4
1650.24 x 928.26
1035.9 x 620.5 x 142.9 1227.4 x 728.2 x 143.2 1675.8 x 983.8 x 124.2
17.9
22.4
44.0
30 – 81
48 – 75
1920 x 1080 @ 60
1920 x 1080 @ 60
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard
voltage can vary in different countries.
Temperature: 0˚C – 40˚C (32˚F – 104˚F)
Humidity: 10 % – 80 %, non-condensing
Temperature: -20˚C – 45˚C (-4˚F – 113˚F)
Humidity: 5 % – 95 %, non-condensing
- Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data
exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation settings if
desired.
- Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may
appear brighter or darker on the panel. This does not affect product performance.
AUDIO IN
HDMI IN 1, HDMI IN 2
- This device is a Class A digital apparatus.
HDMI IN 1, HDMI IN 2
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
DP IN
Connecting an External Monitor
Connecting to an Audio System
N To use old and new models together, first contact the dealer the product was
purchased from to check if they are compatible.
AUDIO OUT
PowerSaver
DP OUT (LOOPOUT)
PowerSaver
N For details on how to use the MDC programme, refer to Help after installing the programme.
The MDC programme is available on the website.
RJ45
RS232C IN
0.5 W
0W
0.5 W
0W
0.5 W
0W
- The displayed power consumption level can vary in different operating conditions or when settings are
changed.
- SOG(Sync On Green) is not supported.
- To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord.
Disconnect the power cable if you will not be using the product for an extended period of time (during
vacation, etc.).
RJ45
RS232C OUT
RS232C OUT
Rating Typical Max
Power saving mode
Power off
(SOG Signal : Not
Power off
(Power Switch)
Support the DPM Mode)
OM46D-W
350 W 216 W 385 W 0.5 W
OM46D-K
OM55D-W
Power
450 W 297 W 495 W 0.5 W
Consumption OM55D-K
OM75D-W
850 W 542 W 935 W 0.5 W
OM75D-K
Connecting to MDC
RS232C IN
Normal Operation
RS232C IN
Contact SAMSUNG WORLD WIDE
OMD_INDIA_QSG_BN68-06814J-01.indd 2
RS232C OUT
RS232C OUT
RS232C IN
RS232C IN
Web site: www.samsung.com/displaysolutions
- Download the user manual from the website for further details.
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
2016-05-17 오후 5:07:00
Download PDF

advertising