Samsung RM40D Quick start guide
Add to my manuals2 Pages
Samsung RM40D: Experience a world of entertainment and endless possibilities with your new Samsung SMART Signage TV. Combine the convenience of a TV with the dynamic capabilities of digital signage, seamlessly switching between TV broadcasts and captivating advertisements using MagicInfo Express 2 software. Create and schedule personalized content to engage your audience, whether in a retail store, office, or public space.
advertisement
▼
Scroll to page 2
Case 1. TV Case 2. TV+Signage Step2 - Type A Components SMART Signage TV A 1 200mm (7.88”) VESA STANDARD 53mm Preparations before installation 48”~55” 1-1 RM40D RM48D 400mm (15.75”) 1-2 200mm (7.88”) 400mm (15.75”) 32”~40” 48”~55” B C (2.09”) 32”~40” X8 1-3 You can use the product as a TV, and as signage (advertisement media) using the MagicInfo Express 2 programme on your compatible computer. -- The warranty way be void in the event of a breakdown due to exceeding the maximum recommended hours of use per day of 16 hours. ” ~40 32” ” ~40 32” To use it as a TV only, follow Step1 through Step4. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. To use it as a TV+signage, follow Step1 through Step6. Step1 ~ 4 BN68-06719R-01 Step1 ~ 6 Place the product on a soft cloth to protect the panel. 1-5 1-4 Step1 Unpack 1-6 B B Step2 Install Wall Mount Type 2 3 4 Stand Type Remove the paper tape at the centre of A (Drill guide sheet). Attach B (Leveler) to the appropriate spot at the centre of A (Drill guide sheet). Fix A (Drill guide sheet) to the wall using C (Sticker). Make sure that B (Leveler) is level. Components 2 Warranty card 3 Regulatory guide 2 4 User manual / MagicInfo Express 2 (USB or DVD) 2-1 (Not available in some locations) 5 6 7 48”~55” C 1 Quick setup guide 1 32”~40” A A Type B Type A The following images are for reference only. Real-life situations may differ from what is shown in the images. Components may vary depending on the country and model. Store the empty box in a dry area so that it can be used when moving the product in the future. * Make sure no component is missing in the package. Contact the vendor where you purchased the product or Samsung if any components specified as included are missing. * The Mini Wall-mount Kit may not be supported, depending on the model. Place A (Drill guide sheet) on the back of the product to confirm the locations of VESA holes. *To install the product in portrait orientation, lay it down vertically to test the requirements. The product can be installed in either landscape or portrait orientation. Select an orientation. *If installing the product in portrait orientation, TV broadcasts and video playback may be limited. You can create content using the MagicInfo Express 2 programme on your compatible computer. 5 Mini Wall-mount Kit (optional) Included components X2 Installing the wall-mount kit 5mm (0.2") 1 2-2 65mm (2.6") 2 F E D G X2 X2 H X4 I X4 2-3 H D Included components E 6 Stand base 7 Stand neck 8 9 2mm (3/32") 8 Remote Control 0 9mm (11/32") D I 9 Batteries To install the product using the stand, refer to "Stand Installation" on the next page. To install the product using the wall-mount kit, refer to "Wall Mount Installation". (Not available in some locations) 0 Power cord Fasten D (Bracket Distance) to H (Plastic Anchor) on the wall, using I (Screw). H 48”~55” 32”~40” 32”~40” 48”~55” Insert the tab of D (Bracket Distance) into the hole of E (Cover Distance). 2-4 2-5 Step2 - Type A G Wall Mount Installation F Precautions when installing the wall-mount kit Wall Check the type of the wall before installing. Follow steps 1 (drill test holes) → 2 (drill the screw holes) and fix H (Plastic Anchor) on the wall. *Screws are not needed. *Drill holes in the wall and remove the guide sheet. Make sure the wall where the provided mini wall mount kit will be installed is flat, smooth and perfectly vertical. Dry Wall, Gypsum-board, SheetRock: Please use a qualified installer to install the Wall Mount Bracket. Attach F (Bracket Wall), as shown in the diagram. Fix the assembled bracket using G (Screw). Components Standard Installation Requirements by Wall Type * MDF = Medium Density Fiberboard * PW = Plywood 3 Min. 50mm Min. 25mm Min. 25mm Min. 30mm MDF, PW, etc. With reinforcement Min. 50mm MDF, PW (Exc. drywall thickness) Art Wall Min. 10mm MDF, PW Min. 10mm MDF, PW Concrete Art Wall Min. 10mm MDF, PW Mounting your SMART Signage TV Mixed Concrete Wall (Exc. drywall thickness) 3-1 3-2 N <Installation is complete> J MDF, PW, Concrete N Art Wall Drywall Without reinforcement K L X2 M N X4 Cannot install on drywall Installing on a drywall with stud reinforcements c Checking the Components 3-3 3-4 N J Cannot be mounted on unreinforced wall or drywall surfaces. 0~24mm X2 To install the product in portrait orientation, refer to the diagram found under "Installing in Portrait Orientation" below. Min. 30mm MDF, PW J K N M L K K K Contact the dealer where you purchased the product or Samsung if any components are missing. The appearance of the components may differ from the images shown. 65mm(2.5") A 400mm (15.75”) 200mm (7.88”) VESA STANDARD 53mm 48”~55” 3mm(1/8") 200mm (7.88”) 400mm (15.75”) 32”~40” 32”~40” Leveler Sticker F E D X2 • Check the type of wall, location of the studs and then insert the screws. C X2 X4 H G X2 (M5X15) Plastic Anchor • The holes must be drilled along the centre axis of the studs. Bracket Distance Cover Distance J K Bracket Wall Screw Mini Wall-mount Kit 4 Connecting cables Move the product side to side slightly to level it. c Installing in Portrait Orientation Right N X2 X2 L X4 M Holder TV Top Holder Support Holder TV Bottom A Holder TV Bottom B left low part M Screw Back Extend M (Holder TV Bottom B) and connect the cables. [RMD-QSG]BN68-06719R-01.indd 1 Install the product on the wall bracket. A click sound means it is attached correctly. Front Screw (M8X40) 15mm Attach L (Holder TV Bottom A) and M (Holder TV Bottom B) to K (Holder Support). X4 I • Minimum Stud Size: 51 x 102 mm (2 x 4 in), Predrill 3mm holes before inserting the screws. • Inserting the screws without predrilling can split the studs. Manufacturer will not be responsible for any issue arising from your failure to follow these installation instructions or damage to walls or studs, as a result of installation. Top: Fix J (Holder TV Top) using N (Screw). Bottom: Fix K (Holder Support) using N (Screw). X8 48”~55” Drill guide sheet Installation Requirements B (2.09”) To use in portrait orientation, make sure that the connectors are on the side that faces down when installing. 2015-11-09 �� 10:52:24 Step6 Create & Schedule Your Business Content Step2 - Type B 2 1 Stand Installation Starting MagicInfo Express 2 MagicInfo Express 2 software provides easy-to-use tools to create, edit, schedule and deploy your custom content through the Samsung SMART Signage TV. The Mobile App makes content management more convenient using your smartphone or tablets. Create and schedule in-store menu boards, welcome screens, slideshows and promotions to complement and reinforce your unique business environment. Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Disassembly is in the reverse order of assembly. <Installation is complete> 3 4 5 1 6 Downloading MagicInfo Express 2 Free MagicInfo Express 2 2 Step3 Connect Compatible Source Devices To download the software on your PC, visit http://www.samsung.com/displaysolutions/signagetv Click the download button on the website and install MagicInfo Express 2 on your PC. PC HDMI IN 2 (DVI) Set Top Box PC AUDIO IN HDMI IN 1 (STB) AUDIO OUT PC IN AV IN USB device L AUDIO R RS232C IN 2 3 Antenna Step4 Initial Setup 5 If there is a wireless network available. Refer to Step4. Initial Setup > Network Settings. If there is no wireless network available. On your Signage TV, go to MENU m > Network > Soft AP (Wi-Fi Hotspot) and turn it on. Next, check the TV name and password. Go to the Wi-Fi setup on your PC. Select your TV name and enter the password. Schedules can be sent to a USB device. Connect the USB device to your display. The schedule will play automatically. Network 1 2 3 4 5 6 Network Settings Your wireless network is setup and ready to use. Channel Source Select the source of your live TV signal. Auto Tuning You can automatically search broadcast signals and save retrieved channels. Network Connect to a wireless network to use the product as a TV+Signage. * To use as a TV only, press the Next button and skip the Network Settings. This also applies if no wireless networks are available. You can change settings later by selecting MENU m > Network > Network Settings. 1. Available wireless networks are listed automatically in Network Settings. Select a network name (SSID) to connect. 2. Enter your security key (Enter password.) and select Done. The product may try to automatically connect to a wireless network that is not secure. 3. If wireless networks are not listed automatically, select Add Network and enter a network name (SSID) to manually search for a network. AP000 Ready to play your business content. -Run the Content Creator on your PC, then create and schedule your content. You can send it to the Signage TV using the wireless network. -Refer to the Content Creator manual for more information. Specifications RM48D ATTENTION: This product is qualified for the BEE Star rating in the ‘Standard’ Mode. Size 101 cm 121 cm The Objectives of Star Labeling Program is designed to promote energy efficient products and practices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality. Panel Display area 885.6 mm (H) x 498.15 mm (V) 1054.08 mm (H) x 592.92 mm (V) • Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption. Dimensions (W x H x D / Weight) Without Stand 906.6 x 532.9 x 65.1 mm / 7.6 kg 1075.1 x 627.6 x 65.5 mm / 11.1 kg With Stand 906.6 x 578.2 x 196.4 mm / 8.3 kg 1075.1 x 673.8 x 203.9 mm / 12.0 kg Audio Output 10 W + 10 W Power Supply AC 100 to 240 VAC (+/- 10%), 60 / 50Hz ± 3Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Operating Temperature : 0°C - 40°C (32°F - 104°F) Humidity : 10 % - 80 %, non-condensing Storage Temperature : -20°C - 45°C (-4°F - 113°F) Humidity : 5 % - 95 %, non-condensing - Plug-and-Play This SMART Signage TV can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the SMART Signage TV and PC system optimizes the SMART Signage TV settings. SMART Signage TV installation takes place automatically. However, you can customize the installation settings if desired. - Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance. - This device is a Class A digital apparatus. Step5 Play Content Sort by : File Name RM40D Model Name Environmental considerations [RMD-QSG]BN68-06719R-01.indd 2 4 Playing content from your SMART Signage TV When you use USB (available for PC software) After powering on the product for the first time, configure basic settings such as the language, channel and time. Language → Regional Settings → Channel Source → Auto Tuning (Auto Tuning does not appear if Set-top box or No TV(Signage Only) is selected.) → Network Settings → Clock → Auto Power Off → Setup Complete! Schedule 3 Send Schedules can be sent directly to the product using the below methods. If there are two or more devices that have the same name, go to MENU m > Network > Device Name and change the device names to make them distinguishable. Speaker Content : All Schedule Content Camcorder ANT IN AIR/CABLE Device : All Create Content -- To use the create content tool, first register your store. The name of the registered store is automatically entered in the template. The registered business hours is set as the default business hours when a content schedule is created. -- A video tutorial on using the create content tool can be found on YouTube. Click [ ] at the bottom left of the home screen. -- Quick Start: This mode automatically configures the layout according to the selected element. Even beginners can easily design content using this mode. -- Custom Design: This mode allows professional and advanced users to design content using custom layouts. -- Send a schedule to the product or a USB device. VIDEO USB (5V 0.5A) / CLONING Home 1 PC For details on how to download the mobile app and on its features, go to http://www.samsung.com/displaysolutions/signagetv Creating content and schedules Initial Setup Pre-connection Checkpoints -- Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. -- Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. -- Connect the sound ports correctly: left = white and right = red. -- Check the types of ports at the back of the product you want to connect. -- If the product is in portrait orientation, it is not possible to change Source List. -- Depending on the country or region. MagicInfo Express 2 Options Starting MagicInfo MagicInfo is a business solution that allows the product to be used as signage (advertising media). Press the HOME or MagicInfo Player I button on the remote control to run the MagicInfo browser. You can browse or play content stored on the internal memory or a USB storage device. Playing content from the internal memory or a compatible USB Play compatible images or videos stored in the internal memory or the connected USB. Playing content from your compatible computer or mobile device The content sent via MagicInfo Express 2 will be displayed as a schedule. You can also edit the schedule using your mobile device. For more information on how to use the MagicInfo Express 2 or mobile app, refer to Step6. If the internal memory is insufficient, connect a USB device and go to Options → Settings → Default Storage at the top right of the MagicInfo browser. Change the option to USB. * To find out how much internal memory is left, press INFO on the remote control. (For India Only) This product is RoHS compliant. For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282. • Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated energy consumption. To reset the television to Star rating qualified settings, select ‘Standard’ mode from the initial set-up procedure in ‘factory settings’ under the ‘Set-up’ menu. Model Name Type Screen Size (inches) Screen Size (cm) Star rating Annual Energy consumption (kWh/Year) LH40RMDWLGU/XL LED 40 101 5 152 LH48RMDWLGU/XL LED 48 121 5 174 Contact SAMSUNG WORLD WIDE Web Site : http://www.samsung.com/displaysolutions/signagetv Download the user manual from the website for further details. Country Customer Care Centre INDIA 1800 3010 8282 2015-11-09 �� 10:52:32
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Digital signage flat panel Black
- 101.6 cm (40") 1920 x 1080 pixels LED 350 cd/m²
- 8 ms