Samsung | OH85F | Samsung OH85F Quick Setup Guide

Reverse Side
Quick Setup Guide
OH85F
SERVICE
−−The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
−−Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
HDBT
(LAN IN)
HDMI IN 2
HDMI IN 1
DP IN 2
(UHD 60Hz)
DP IN 1
(UHD 60Hz)
AUDIO
OUT
RS232C IN
1 Connects to a USB device when upgrading software.
2- Sends the HDMI signal to a connected LAN cable using an HDBaseT transmitter.
- Connects to MDC using a LAN cable.
3
Connects to a source device using a HDMI cable or HDMI-DVI cable.
4Connects to a PC using a DP cable.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
- Obtain sharp picture quality when viewing UHD content at 60Hz.
5Outputs sound to an audio device via an audio cable.
BN68-08194Z-00
Front
Checking the Components
Contact the vendor where you purchased the product if any components are missing.
The color and shape of parts may differ from what is shown.
The pictures may look different from the actual components.
Specifications are subject to change without notice to improve quality.
6Connects to MDC using an RS232C adapter.
Troubleshooting Guide
Issues
Solutions
Issues
The screen keeps
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
There is no image on the The product is in power-saving mode.
screen and the power
LED blinks every 0.5 to 1 Press any key on the keyboard or move the
second.
mouse to return to the previous screen.
No Signal is displayed on Check that the product is connected correctly
the screen.
with a cable.
Quick Setup Guide
MagicInfo Software DVD
Check that the device connected to the
product is powered on.
Warranty card
(Not available in some locations)
Batteries
(Not available in some locations)
Remote sensor
Press a button on the remote control pointing at the sensor on the
front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
Depending on the type of external device, the
screen may not display properly. In this case,
connect it with the HDMI Hot Plug function
turned On.
Not Optimum Mode is
displayed.
The images on the
screen look distorted.
The screen appears
unstable and shaky.
Remote Control
BN68-08194Z-00_QSG_OH85F_INDIA_ENG.indd 1
Cover-Cap X 16
There are shadows or
ghost images left on the
screen.
Picture quality of the
product is different from Use an HDMI cable to obtain high-definition
the dealer shop where it (HD) picture quality.
was purchased.
The remote control does Make sure that the batteries are correctly in
not work.
place (+/-).
Check if the batteries are flat.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
Check the cable connection to the product.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
Solutions
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
A beeping sound is
heard when my PC is
booting.
When I try to change the
PC resolution, a message
“The defined resolution
is not currently
supported.” appears.
If a beeping sound is heard when your PC is
booting, have your PC serviced.
The message “The defined resolution is not
currently supported.” appears if the input
source resolution exceeds the maximum
resolution of the display.
To resolve the issue, change the PC resolution
to a resolution supported on the display.
2018-04-06 오후 3:51:35
Connecting to a PC
Connecting
to an Audio System
HDMI IN 1, HDMI IN 2, HDMI IN 3
Specifications
Model Name
AUDIO OUT
HDMI IN 1, HDMI IN 2
OH85F
Size
214 cm
Display area
1872 mm (H) x 1053 mm (V)
Panel
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Power Supply
HDMI IN 1, HDMI IN 2
Connecting to MDC
RGB / DVI / HDMI / AUDIO IN
Operating
Temperature : -30 °C – 50 °C (-22 °F – 122 °F)
Humidity : 10% – 80%, non-condensing
Storage
Temperature : -20 °C – 50 °C (-4 °F – 122 °F)
Humidity : 5% – 95%, non-condensing
Environmental
considerations
- This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures.
- For detailed device specifications, visit the Samsung Electronics website.
- The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
* Accessory cables: signal cables and power cords
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
RS232C IN
RS232C OUT
Connecting to a Video Device
HDBT (LAN IN)
HUB
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
CAUTION
HDMI IN 1, HDMI IN 2
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
HDMI IN 1, HDMI IN 2
For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
RGB / DVI / HDMI / AUDIO IN
Connecting the HDBase-T
HDMI OUT
HDBT (LAN IN)
HDMI IN
- Only use the AC adapter with your product by Samsung.
- Do not use the power cord with other products.
»» Do not install this equipment in a confined space such as a case or
similar.
»» The slots and openings in the cabinet and in the back or bottom are
provided for necessary ventilation. The slots and openings must never
be blocked or covered.
»» The product should be located away from heat sources such as radiators,
heat registers, or other products that produce heat.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
»» Do not place a water containing vessel (vases etc.) on this apparatus, as
this can result in a risk of fire or electric shock. (Apparatus shall not be
exposed to dripping or splashing)
»» The apparatus must be connected to an earthed MAINS socket-outlet
(Class l Equipment only). Or Use only a properly grounded plug and
receptacle (Class l Equipment only).
»» To disconnect the apparatus from the mains, the plug must be pulled
out from the mains socket, therefore the mains plug shall be readily
operable.
»» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this unit by
POWER.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 1800 40
SAMSUNG(1800 40 7267864) (Toll-Free)
Contact SAMSUNG WORLD WIDE
HDBase-T (Tx)
LAN
»» If your equipment uses an AC adapter:
This symbol indicates that high voltage is present inside. It
is dangerous to make any kind of contact with any internal
part of this product.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
HDMI OUT
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
LAN Cable
HDMI OUT
BN68-08194Z-00_QSG_OH85F_INDIA_ENG.indd 2
2018-04-06 오후 3:51:37
Download PDF