Samsung | OH75F | Samsung OH75F User Manual

User Manual
OH75F
The color and the appearance may differ depending on the product, and
the specifications are subject to change without prior notice to improve the
performance.
Table of contents
Before Using the Product
Copyright6
Safety Precautions
7
Cleaning7
Storage8
Electricity and Safety
8
Installation9
Operation11
Preparations
Checking the Components
14
Components14
Parts15
Front15
Reverse Side
16
Remote Control
17
Before Installing the Product (Installation
Guide)19
Switching between portrait and landscape 19
Ventilation19
Wall Mount Specifications
20
Remote Control (RS232C)
Cable Connection
Connection
Control Codes
21
21
24
25
Connecting and Using
a Source Device
Using MDC
Before Connecting
Pre-connection Checkpoints
Before connecting cables
Power cable connection guide
33
33
34
35
Connecting to a PC
Connection Using an HDMI Cable
Connection Using an HDMI-DVI Cable
36
36
36
Connecting to a Video Device
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
37
37
37
Connecting the HDBase-T
38
Connecting to an Audio System
39
Changing the Input source
40
Source40
Web Browser41
Settings41
Refresh Options43
MDC Program Installation/Uninstallation 44
Installation44
Uninstallation44
Connecting to MDC
Using MDC via RS-232C (serial data
communications standards)
Using MDC via Ethernet
45
45
46
Player feature
Player47
Viewing content
47
When content is running
48
Available menu
48
File Formats Compatible with Player49
Schedule54
Clone Product55
ID Settings56
Device ID
56
PC Connection Cable
56
Video Wall57
Video Wall57
Horizontal x Vertical57
Screen Position58
Format58
Network Status59
2
Table of contents
Picture Mode60
On/Off Timer61
On Timer
61
62
Off Timer
Holiday Management
62
Flesh Tone
72
RGB Only Mode
72
72
Color Space
HDMI UHD Color73
Motion Lighting73
Approving a connected device from the server66
Setting the current time
67
Picture Options74
Color Tone74
Digital Clean View74
HDMI Black Level75
Film Mode75
Smart LED75
Dynamic Backlight75
Screen Adjustment
Picture Size76
Picture Size
76
Fit to Screen
76
Zoom/Position
76
Picture Mode68
Picture Off77
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)69
Reset Picture77
Ticker63
URL Launcher64
URL Launcher Settings65
Color Temperature70
White Balance70
2 Point70
10 Point70
Gamma71
Calibrated Value71
Advanced Settings72
Dynamic Contrast
72
Black Tone
72
OnScreen Display
Display Orientation78
Onscreen Menu Orientation78
Source Content Orientation78
Aspect Ratio78
Screen Protection79
Auto Protection Time79
Screen Burn Protection79
Message Display82
Source Info
82
No Signal Message
82
MDC Message
82
Download Status Message
82
Language83
Reset OnScreen Display83
Network
Network Status84
Open Network Settings84
Network type84
85
Network Settings (Wired)
Server Network Settings87
Connect to Server87
MagicInfo Mode87
Server Access87
FTP Mode87
3
Table of contents
Proxy Server87
Device Name87
System
Accessibility88
Menu Transparency88
High Contrast88
Enlarge88
Start Setup89
Time90
Clock Set90
NTP Settings90
DST90
Sleep Timer90
Power On Delay90
Auto Source Switching91
Auto Source Switching91
Primary Source Recovery91
Primary Source91
Secondary Source91
Power Control92
92
Auto Power On
92
Max. Power Saving
Standby Control
92
Network Standby93
Power Button93
Eco Solution94
Energy Saving Mode94
Eco Sensor94
Screen Lamp Schedule95
No Signal Power Off 95
Auto Power Off95
Fan & Temperature96
Fan Control
96
Fan Speed Setting
96
96
Outdoor Mode
Temperature Control
96
Input Device Manager97
Keyboard Language97
Keyboard Type97
Input Language Shortcut97
Play via97
Change PIN98
Security99
Safety Lock On99
USB Auto Play Lock99
Remote Management99
General100
Smart Security
100
Anynet+ (HDMI-CEC)101
HDMI Hot Plug103
Custom Logo103
Game Mode104
Support
Software Update105
Update now105
Auto Update105
Contact Samsung105
Reset All105
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center
Testing the Product
Checking the Resolution and Frequency
Check the followings.
106
106
106
107
Q & A
112
Specifications
General114
Preset Timing Modes
116
Reset System104
4
Table of contents
Appendix
Responsibility for the Pay Service (Cost to
Customers)119
Not a product defect
119
A Product damage caused by customer's
fault119
Others119
Optimum Picture Quality and Afterimage Burn120
in Prevention
Optimum Picture Quality
120
Prevention of Afterimage Burn-in
120
License122
Terminology123
5
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2017 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
6
Safety Precautions
Warning
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with
wet hands. Otherwise, an electric shock may result.
Activities marked by this symbol are prohibited.
3
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent
or surface-active agents.
Instructions marked by this symbol must be followed.
!
•• Do not spray water or detergent directly on the
product.
4
Wet a soft and dry cloth in water and wring thoroughly to clean
the exterior of the product.
5
Connect the power cord to the product when cleaning is
finished.
6
Power on the product and computer.
7
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
white-colored stains on the product.
――Contact Customer Service Center if the inside of the product needs cleaning (service fee will
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave
the power cord under a heavy object.
be charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket
with a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric
shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
8
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON
TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT
SOURCES.
Only use the power cord provided with your product by Samsung. Do
not use the power cord with other products.
•• A fire may result.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
Keep the power socket where the power cord is connected
unobstructed.
•• Only use approved cabinets.
!
•• The power cord must be disconnected to cut off power to the
product when an issue occurs.
!
Do not install the product in poorly ventilated spaces such as a
bookcase or closet.
•• Note that the product is not completely powered down by using
only the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power
socket.
Install the product at least 10 cm away from the wall to allow
ventilation.
•• An electric shock or fire may result.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
9
Do not install the product on an unstable or vibrating surface
(insecure shelf, sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an
injury.
•• Using the product in an area with excess vibration may damage
the product or cause a fire.
Do not drop the product while moving.
•• Product failure or personal injury may result.
!
Do not install the product in a vehicle or a place exposed to dust,
moisture (water drips, etc.), oil, or smoke.
Do not set down the product on its front.
•• The screen may become damaged.
•• A fire or electric shock may result.
!
Do not expose the product to direct sunlight, heat, or a hot object
such as a stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an
injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
Set down the product gently.
•• The product may fall and injure children.
•• Product failure or personal injury may result.
•• As the front is heavy, install the product on a flat and stable
surface.
!
Edible oil, such as soybean oil, can damage or deform the product. Do
not install the product in a kitchen or near a kitchen counter.
SAMSUNG
!
Precautions during installation and storage
•• After opening the cover, install the product within 1 hour under humidity of 60% or below.
(P. 34)
Installing the product in an unusual place (a place exposed to a lot of
fine dust, chemical substances, extreme temperatures or a significant
presence of moisture, or a place where the product will operate
continuously for an extended period of time) may seriously affect its
performance.
•• Be sure to consult Samsung Customer Service Center if you want
to install the product at such a place.
•• Keep the predefined humidity while opening the cover or assembling the housing (e.g.
connection of external device, F/W update).
•• During operation and storage of the product, be sure to attach the cover.
10
Operation
Do not leave heavy objects or items that children like (toys, sweets,
etc.) on top of the product.
•• The product or heavy objects may fall as children try to reach for
the toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair
or modify the product yourself.
During a lightning or thunderstorm, power off the product and
remove the power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Center for repairs.
!
Before moving the product, turn off the power switch and disconnect
the power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung
Customer Service Center.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug.
Also, ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the
power switch and disconnect the power cord. Then contact Samsung
Customer Service Center.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any
cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
11
Do not use or keep combustible spray or an inflammable substance
near the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period
of time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if
you will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or
objects that burn easily (paper, matches, etc) into the product (via the
vent or input/output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric
shock or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have ENTER Ed the
product. Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan
on using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or
metallic objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have ENTER Ed the
product. Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not block the vent on the product. The product may not function
properly due to potential overheating.
!
Do not use humidifiers or stoves around the product.
Do not attempt to insert your fingers or objects into the vents.
•• A fire or electric shock may result.
•• Product failure or personal injury may result.
12
Rest your eyes for more than 5 minutes for every 1 hour of product
use.
Be careful that children do not place the battery in their mouths
when removed from the remote control. Place the battery in a
location that children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your
doctor immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
!
Store small accessories out of the reach of children.
Use only the specified standardized batteries, and do not use a new
battery and a used battery at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal
injury or damage due to a leakage of the internal liquid.
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse
and must be returned for recycling purposes. The customer is
responsible for returning the used or rechargeable batteries for
recycling.
•• Your hand or finger may get stuck and injured.
!
•• Otherwise, the battery may become damaged or it may cause
fire, personal injury or damage due to leakage of the internal
liquid.
•• Tilting the product at an excessive angle may cause the product
to fall and an injury may result.
Do not place heavy objects on the product.
!
•• The customer can return used or rechargeable batteries to a
nearby public recycling center or to a store selling the same
type of the battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too
high.
•• Having the sound too loud may damage your hearing.
13
Chapter 02
Preparations
Checking the Components
Components
–– Contact the vendor where you
purchased the product if any
components are missing.
-
-
+
+
–– The appearance of the components
may differ from the images shown.
–– A stand is not provided with the
product. To install a stand, you can
purchase one separately.
Quick setup guide
Remote Control
Warranty card
(Not available in some locations)
MagicInfo Software DVD
Batteries
(Not available in some locations)
Cover-Cap (16 EA)
14
Parts
Front
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port
Remote sensor
Description
Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be
inadvertently controlled.
15
Reverse Side
Port
――The color and shape of parts may differ from what is shown.
USB
Connect to a USB memory device.
HDBT (LAN IN)
- Sends the HDMI signal to a connected LAN cable using an HDBaseT
transmitter.
- Connects to MDC using a LAN cable.
Specifications are subject to change without notice to improve quality.
Description
――Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.
USB
HDBT
(LAN IN)
HDMI IN 1
HDMI IN 2
AUDIO
OUT
HDMI IN 1, HDMI IN 2
Connects to a source device using a HDMI cable or HDMI-DVI cable.
AUDIO OUT
Outputs sound to an audio device via an audio cable.
RS232C IN
Connects to MDC using an RS232C adapter.
RS232C
IN
16
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
POWER
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
1
4
7
2
5
8
0
Power off the product.
3
6
Number buttons
Enter the password in the OSD menu.
9
CH LIST
Mute the sound.
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.
MUTE
VOL
MENU
SOURCE
Unmuting the sound: Press MUTE again or
press the volume control(+ VOL -) button.
CH
–– Remote control button functions
may differ for different products.
HOME
Player Launch Button.
17
Quickly select frequently used functions.
TOOLS
INFO
Display information about the current input
source.
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a product ID using the number buttons.
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
UNSET
LOCK
Exit the current menu.
Manually select a connected input source
from HDMI 1, HDMI 2 or HDBT.
IR control
SET
It sets safe lock function.
Control the product using the remote control.
Cancel a value that has been set using the SET
button and control all connected products
using the remote control.
–– Remote control button functions
may differ for different products.
–– Remove batteries when the remote
control is not to be used for an
extended period of time.
To place batteries in the remote control
18
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Switching between portrait and landscape
――Contact Samsung Customer Service Center for further details.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 60 mm
B Ambient temperature: Under 50 ℃
A
•• When installing the product on a perpendicular wall, allow at least 60 mm of space between the product and
wall surface for ventilation and ensure that the ambient A temperature is kept below 50 ℃.
B
Figure 1.1 Side view
19
Wall Mount Specifications
――Install the wall mount on a solid wall that is perpendicular to the floor. If you install the product on a slanted wall, it may fall and result in severe personal injury. Before attaching the wall mount
to surfaces other than plaster board, please contact your nearest dealer for additional information.
――Do not use a wall mount that can tilt.
――Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
――Do not keep the product turned on during the installation of the wall mount. It may result in personal injury due to electric shock.
――Do not use the guide holes for wall mounting.
Unit: mm
Screw hole specs (A * B) in millimeters
870 x 260
Screw hole specs (C * D) in millimeters
1118.4 x 538.2
E
91.7
F
40.8
G
77.4
BOLT SIZE
M8
: Wall Mount Holes (8 Points)
: Guide Holes (4 Points) (Do not use the guide holes for wall mounting)
20
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
5 4 3 2 1
6 7 8 9
9 8 7 6
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
<Male type>
Pin
<Female type>
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
21
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
6
•• Pin assignment
3
2
1
1
1 2 3 4 5 6 7 8
-P2-
9
-P1-
5
-P1Male type
-P1-
-P2-
-P2-
Rx
3
----------
1
Tx
STEREO
Tx
2
----------
2
Rx
PLUG
Gnd
5
----------
3
Gnd
(3.5ø)
Pin No
Standard Color
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
22
Cross LAN cable (PC to PC)
•• Connector : HDBT (LAN IN)
Direct LAN cable (PC to HUB)
HUB
HDBT
(LAN IN)
P2
HDBT
(LAN IN)
P1
P2
P1
P1
P2
RJ45 MDC
Signal
P1
TX+
1
P2
Signal
↔
3
RX+
P2
Signal
TX-
2
↔
6
RX-
↔
1
TX+
RX+
3
↔
1
TX+
2
↔
2
TX-
RX-
6
↔
2
TX-
RX+
3
↔
3
RX+
RX-
6
↔
6
RX-
Signal
P1
TX+
1
TX-
23
Connection
•• Connection 2
•• Connection 1
――Ensure that you connect the RS232C(IN) adapter to the RS232C IN port on the product.
HDBT
(LAN IN)
HDBT
(LAN IN)
RS232C IN
24
No.
Control Codes
9
Viewing control state (Get control command)
Header
Command
0xAA
Command
type
ID
Data length
Command
0
0xAA
Command
type
ID
Command type
Video Wall User Control
Value range
0x89
-
E.g. Power On & ID=0
Data length
Data
1
Value
Command
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
Checksum
Command
No.
Command
•• All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
Checksum
Controlling (Set control command)
Header
Command type
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
Video wall mode control
0x5C
0~1
7
Safety Lock
0x5D
0~1
8
Video Wall On
0x84
0~1
ID
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.
25
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
ID
Data length
Checksum
0
•• Setting the volume (Set Volume)
Data length
Data
1
"Power"
Checksum
"Power": Power code to be set on a product.
Header
Command
0xAA
0x12
ID
Data length
Data
1
"Volume"
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
•• Ack
0: Power OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
Command
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Header
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
26
Input source control
•• Ack
•• Function
The input source of a product can be changed using a PC.
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x14
ID
Data length
Checksum
Command
0xAA
0x14
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
Checksum
•• Nak
0
ID
Command
"Input Source": An input source code to be set on a product.
•• Setting the input source (Set Input Source)
Header
Header
Data length
Data
1
"Input Source"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"Input Source": An input source code to be set on a product.
0x0C
Input source
0x20
MagicInfo
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
0x24
HDMI2_PC
0x55
HDBT
――HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
"Get" commands.
――MagicInfo is only available with models that contain the MagicInfo function.
27
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
•• Viewing screen status (Get Screen Mode Status)
Header
Command
0xAA
0x18
ID
Data length
0xAA
ID
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
0xFF
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
•• Function
The screen size of a product can be changed using a PC.
Data
length
Data
Checksum
1
"Screen
Mode"
•• Viewing the screen size (Get Screen Size Status)
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
"Screen Mode": A code that sets the product status
0x01
0xAA
ID
Screen size control
0
Command
Command
"ERR": A code showing what error has occurred
Checksum
•• Setting the picture size (Set Picture Size)
Header
Header
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen
Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
28
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock On function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
•• Viewing the safety lock state (Get Safety Lock Status)
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
"Video Wall Mode": A code used to activate Video Wall mode on a product
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety
Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
"ERR": A code showing what error has occurred
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
29
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
Checksum
0xAA
0x84
ID
Data length
Data
1
V.Wall_On
0: Video Wall OFF
0xFF
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
Header
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
•• Ack
0xAA
Ack/Nak
•• Get Video Wall Status
1: Video Wall ON
Command
0xFF
Data
length
•• Function
Turn the Video Wall function on or off on the product from your computer.
Checksum
•• V.Wall_On: Video Wall code to be assigned to the product
Header
0xAA
ID
Video Wall User Control
•• Set Video Wall On/Off
Command
Command
"ERR": A code showing what error has occurred
0
Header
Header
ID
V.Wall_On : Same as above
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_On
Checksum
Header
Command
0xAA
0x89
ID
Data
length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
30
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A 0x3B
0x3C
0x3D 0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A 0x4B
0x4C
0x4D 0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D 0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D 0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A 0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3 0xA4 0xA5
0xA6
0xA7
0xA8 0xA9
0xAA N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8 0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3 0xD4 0xD5 0xD6 0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0x9B
31
Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_
SNo
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
32
Chapter 03
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
――Check the types of ports at the back of the product you want to connect.
33
Before connecting cables
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
3
Insert and keep the removed Silicone-Bar in
the marked area to ensure it is not lost.
4
Insert the appropriate cable into the hole
from which the Silicone-Bar was removed.
Unfasten the screws, then remove the cover.
5
The cable should be connected as shown.
Remove the appropriate silicon bar for the
thickness of the cable to connect.
2
Different hole sizes and corresponding cable
thickness for each:
――7 Ø hole x 1: Insert the 7 Ø cable
――5.5 Ø hole x 6 : Insert the 5.5 Ø cable
Silicone-Bar
――3 Ø hole x 2 : Insert the 3 Ø cable
6
Close the cover, then fasten the screws.
――After all the cables are connected, make
sure to close the cover and fasten the
screws to ensure it is water tight.
――Recommended torque :10 - 12 kgf.cm
――8.5 Ø hole x 1 : Insert the 8.5 Ø cable
34
Power cable connection guide
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Prepare the waterproof power cable whose
diameter is 8.5 mm for 15 A.
1
Put the soldered (connected) part of the
power cables inside the product.
3
Distribution
switchboard
Connect the two power cables to each
other. Solder and insulate the connected
part.
2
Close the rear cover and fasten the screws.
4
Different power cable colors by country
When connecting an external power cable, be sure to match the colors of its wires with those of the 3 wires inside the product’s power cable. The meaning (Neutral, Live or Ground) of each wire
color of the external power cable may differ depending on the country.
――Be sure to refer to the following table to correctly connect wires by the same meaning:
Model Name
Neutral
Live
Ground
Country
OH75F
BLUE
BROWN
GREEN/YELLOW
WHITE
BLACK
GREEN
BLUE
BROWN
GREEN/YELLOW
Europe
BLACK
RED
GREEN/YELLOW
India
WHITE
BLACK
GREEN
Taiwan & Japan
or GREEN/YELLOW
or GREEN/YELLOW
America
35
Connecting to a PC
Connection Using an HDMI-DVI Cable
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
36
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable
Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
――The appearance may differ depending on the product.
――Connecting parts may differ in different products.
Connection Using an HDMI Cable
――The appearance may differ depending on the product.
――Connecting parts may differ in different products.
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio
cable.
–– To connect the product to a digital device that does not support HDMI output, use an
HDMI-DVI and audio cables.
•• The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the product. If such a
problem occurs, ask the manufacturer of the external device about the HDMI version and,
if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
HDMI IN 1, HDMI IN 2
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI IN 1, HDMI IN 2
37
Connecting the HDBase-T
――The appearance may differ depending on the product.
――Connecting parts may differ in different products.
――HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect them directly using a LAN cable.
――Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a hub.
――HDBase-T works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but, to ensure CE compliance, STP cables and STP Connectors are required. Shielded cable and
connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance. It is recommended to use an STP cable to maximize
performance. Using a UTP cable or patch may decrease performance.
HDMI OUT
HDBase-T (Tx)
HDBT (LAN IN)
LAN
HDMI IN
HDMI OUT
LAN Cable
HDMI OUT
38
Connecting to an Audio System
――Connecting parts may differ in different products.
AUDIO OUT
39
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert
You can display the screen of a source device connected to the product. Select a source from source list to display
the screen of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
to.
SOURCE → Source
Source
MagicInfo S
Edit
Web Browser
SOURCE → Source → u → Edit → ENTER E
HDBT
Screen Mirroring
–– The displayed image may differ depending on the model.
HDMI 1
HDMI 2
Edit the name and device type of a connected external device.
•• The list can include the following source devices. Source devices on the list differ depending on the selected
source.
HDMI 1 / HDMI 2 / HDBT / Cable Box / Game Console / PC / Blu-ray player
•• You cannot edit the following sources.
MagicInfo S / URL Launcher / Web Browser
Information
INFO
You can see detailed information about the selected external device.
40
Web Browser
Settings
SOURCE → Source → Web Browser → u → Settings → ENTER E
SOURCE → Source → Web Browser → ENTER E
General
Hide Tabs and Toolbar automatically
If the browser tabs, menu or toolbar are not used for a while, they will automatically disappear. To make them
appear again, move the pointer or focus to the top of the screen.
•• Use / Do not use
Pop-up Blocker
Web Browser
Make your browsing experience more pleasant by blocking pop-up windows.
•• Use / Do not use
Reset Settings
–– The displayed image may differ depending on the model.
–– Connect a LAN cable to access Internet from the product, similar to accessing the
Internet from a computer.
All your customized web Browser settings will be reset to their default values. Your bookmarks and history won't be
affected.
Search Engine
If you enter a keyword in the URL/keyword input field, Web Browser will open the Search Results page.
Choose the search engine you want to use.
•• Google / Bing
41
Privacy & Security
Blocked pages
Security Mode
Blocked pages
Provide warnings about unsafe pages or block access to enhance Web Browser security.
Block access to pages that you have listed in Blocked pages.
This may slow the Web Browser down.
•• Use / Do not use
Private Browsing
When Private Browsing is active, your browsing history won't be recorded.
•• Use / Do not use
Do Not Track
Ask websites not to track you.
•• Use / Do not use
JavaScript
Allow all sites to run JavaScript for a better browsing experience.
•• Use / Do not use
Clear History
Clear your entire browsing history.
Delete browsing data
Delete all browsing data such as cookies, cached images and data.
•• Use / Do not use
Blocked Pages
Block or unblock specific pages.
•• Add
Approved pages
Approved pages
Enable web access only to pages that you have approved.
•• Use / Do not use
Password for Approved pages
Set a password for managing Approved pages.
•• Set Password
Approved Pages
Approve specific pages or remove them from Approved pages.
•• Add
Your bookmarks and history won't be affected.
42
Encoding
Encoding
Choose an encoding method for web pages. The current setting is Auto.
•• Auto / Manual (Current : Unicode)
About
Display the current version of Web Browser.
Refresh Options
SOURCE → Source → Web Browser → u → Refresh Options → ENTER E
Refresh Interval
Set the time for the web browser to wait before returning to the home page.
•• Off / 5 min / 10 min / 15 min / 30 min
Zoom
Set the zoom scale to apply when the web browser is refreshed.
•• 50% / 75% / 100% / 125% / 150% / 200% / 300%
Home Page
Set the website to display when the web browser is refreshed.
•• Samsung Display / Custom
Custom
Enter the URL to set as the home page.
•• Enter URL
――Available only when Home Page is set to Custom.
43
Chapter 04
Using MDC
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website.
After you press the Never expired button following the Expired button, the product checks its
status for about a minute. To run a command, try it after a minute.
6
In the displayed "Destination Folder" window, select the directory path you want to
install the program in and click "Next".
――If the directory path is not specified, the program will be installed in the default
MDC Program Installation/Uninstallation
directory path.
7
In the displayed "Ready to Install the Program" window, check the directory path to
install the program in and click "Install".
Installation
8
Installation progress will be displayed.
――MDC installation can be affected by the graphics card, mother board and network
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
conditions.
1
Click the MDC Unified installation program.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click
――Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
――The MDC execution icon may not be displayed depending on the PC system or product
specifications.
――Press F5 if the execution icon is not displayed.
"Next".
4
In the "License Agreement" window displayed, select "I accept the terms in the license
agreement" and click "Next".
5
In the displayed "Customer Information" window, fill out all the information fields and
click "Next".
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
44
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
――The appearance may differ depending on the product.
RS232C IN
Computer
45
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
――The appearance may differ depending on the product.
――Multiple products can be connected using the HDBT (LAN IN) port on the product and the LAN ports on the HUB.
Computer
HDBT
(LAN IN)
HUB
Monitor 1
Monitor 2
46
Chapter 05
Player feature
Accessible using the HOME button on the remote control.
Player
HOME
No.
→ Player → ENTER E
Play a range of content such as channels with schedules assigned, templates or files.
Player
Internal Memory
Used
199.33 MB
1
Filter By: All
5
6
Description
1
Select between internal or external memory.
2
Play content, templates and schedules configured on the server.
•• You can view whether the server is connected (approval) in the Player
screen. To view whether the server is connected when a Network
Channel is running, press INFO on the remote.
Available
4.26 GB(95%)
1
Options
Select Network Channel from the Player screen. The No channel.
message appears if no channel has been registered in Network Channel.
No channel.
2
2
Network Channel
3
3
Play content stored on the server.
4
Play a template stored in the internal memory.
5
Select a content type as criterion to search for a desired content list.
6
Set different options for Player.
Network File
4
Network Channel will run.
My Templates
Viewing content
–– The displayed image may differ depending on the model.
–– To use the Player feature, set Play via to MagicInfo in System.
1
Select either internal or external memory. The files saved in the selected memory appear.
2
Select the desired file. The content appears on the screen. (For more information on
compatible file formats, see the “File formats compatible with Player” section.)
47
When content is running
Control buttons on the remote
You can use buttons on your remote control to play, pause, or skip between content on the
playlist.
Button
Function
TOOLS
Brings up the menu bar.
INFO
Displays the information of the content.
►
Goes to next file or page.
◄
Goes to previous file or page.
E/∆/³
Plays or pauses slide show or video content.
´
Stops displaying content and goes to the Player screen.
π
Rewinds the video content.
µ
Fast forwards the video content.
Available menu
Press the TOOLS button on the remote control during content playback to configure settings.
Menu
Description
Playlist
View a list of content items currently playing.
Picture Mode
Customizes the screen settings for the content currently playing.
Repeat
Set the repeat mode.
Background Music
Set the background music to be played when content is running.
Reset
Reset the background music.
Pause
Pause the background music.
Prev
Play the previous background music on the list.
Next
Play the next background music on the list.
――Reset, Pause, Prev, Next only appear when the background music is set.
48
File Formats Compatible with Player
•• Supported file systems include FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution cannot
be played.Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
–– PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: network BGM > local BGM > video file in the main frame selected by the
user
――Network BGM: Settings can be configured in step 1 when creating a server schedule.
――Local BGM: BGM settings can be configured using the tools displayed after the TOOLS
button is pressed during Player playback.
――User-selected main frame: Main frame settings can be configured in step 2 when creating
a server schedule.
Network Schedule Multiframe
Template files and LFD(.lfd) files
Playback restrictions
Restrictions
•• A maximum of two video files (Video) can be played simultaneously.
•• In portrait playback mode, only one video file can be played at a time.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• LFD(.lfd) files are not supported.
•• Ensure a distributed folder (content / schedules) exists in Internal Memory / USB memory.
Playback restrictions
•• A maximum of two video (Video) files can be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• Multiple videos (Video) cannot be played on a single display of a video wall
simultaneously.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: network BGM > local BGM > video file in the main frame selected by the
user
49
Contents
File Extension Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
Video Codec
H.264 BP/MP/HP
4096x2160
4096X2160: 24
Bit rate
(Mbps)
40
60
80
Motion JPEG
30
80
60
20
MOV
*.3gp
FLV
Divx 3.11 / 4 / 5 / 6
*.vro
VRO
*.mpg
VOB
*.mpeg
PS
1920x1080
TS
*.tp
SVAF
MPEG1
ADPCM(IMA, MS)
AAC
HE-AAC
WMA
MPEG(MP3)
DTS (Core , LBR)
Window Media Video v9 (VC1)
*.ts
AC3
DD+
MPEG4 SP/ASP
MPEG2
Audio Codec
LPCM
HEVC (H.265 - Main, Main10, Main4:2:2 10)
MVC
G.711(A-Law, μ-Law)
Microsoft MPEG-4 v1, v2, v3
*.mov
Frame rate
(fps)
3840X2160: 30
*.mov
*.trp
Resolution
30
20
Window Media Video v7(WMV1),v8(WMV2)
*.flv
*.vob
*.svi
H 263 Sorenson
*.m2ts
VP6
*.mts
*.divx
*.webm
WebM
VP8
1920x1080
90
20
VP9
4096x2160
4096X2160: 24
20
Vorbis
3840X2160: 30
*.rmvb
RMVB
RV8/9/10 (RV30/40)
1920x1080
60
20
RealAudio 6
50
Video
•• 3D video is not supported.
•• Content with a resolution larger than the resolution
specified in the table above is not supported.
•• Video content with a Bit rate or Frame rate larger than
the rate specified in the table above can cause choppy
video during playback.
•• Video content will not play, or not play correctly, if there
is an error in the content or the container.
•• Some USB/digital camera devices may not be compatible
with the player.
Audio
•• Audio content with a Bit rate or Frame rate larger than
the rate specified in the table above can cause choppy
audio during playback.
•• Audio content will not play, or not play correctly, if there
is an error in the content or the container.
•• Some USB/digital camera devices may not be compatible
with the player.
•• Supports up to WMA 10 Pro 5.1 channel. WMA lossless
audio is not supported.
Image
•• Compatible image file format : JPEG, PNG, BMP
――32-bit, 24-bit and 8-bit BMP files are supported.
•• Supported maximum resolution : 4096 x 4096
•• Supported maximum file size: 20MB
•• Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe,
Random)
•• QCELP, AMR NB/WB are not supported.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / AP L4 and AVCHD are not
supported.
•• For all Video codecs except MVC, VP8, VP6:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Only one video file can play at a time if video files on the
monitor use incompatible codecs or the resolution is
1080 x 1920.
•• When a single video file is playing, Seamless mode is not
supported under the following conditions:
–– Incompatible codec (MVC, VP3, MJPEG) ↔
Incompatible codec
–– Incompatible codec ↔ Compatible codec
–– The resolution is different from that of the monitor
–– The frequency is different from that of the monitor
51
Power Point
•• Compatible document file formats
–– Extension : ppt, pptx
–– Version : Office 97 ~ Office 2007
•• Functions not supported
–– Animation effect
–– 3D shapes (which will be displayed in 2D)
–– Header and footer (some subitems are not supported)
–– Word Art
–– Align
A group alignment error may occur
–– Office 2007
SmartArt is not fully supported. 97 out of 115 subitems
are supported.
––
––
––
––
––
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
Some subitems are not supported
PDF
•• Compatible document file formats
–– Extension : pdf
•• Functions not supported
–– Content less than 1 pixel not supported because of
performance degradation issue.
–– Masked Image, Tiled Image content not supported.
–– Content with Rotated Text, not supported.
–– 3D Shadow Effects not supported.
–– Some characters not supported
(Special characters may be corrupted)
WORD
•• Compatible document file formats
–– Extension : .doc, .docx
–– Version : Office 97 ~ Office 2007
•• Functions not supported
–– Page background effect
–– Some paragraph styles
–– Word Art
–– Align
A group alignment error may occur
–– 3D shapes (which will be displayed in 2D)
–– Office 2007
SmartArt is not fully supported. 97 out of 115 subitems
are supported.
––
––
––
––
Charts
Half-width characters
Letter spacing
Vertical text
Some subitems are not supported
–– Slide notes and handout
–– Slide notes and handout
52
Template files
•• Creation/editing/playback are only available in My
Templates.
LFD
•• Supported in Network Channel
•• Compatible document file formats
–– Extension : .lfd
53
Schedule
HOME
You can check the content’s playback schedule on the server, imported from an external
storage, or on a mobile device.
No.
→ Schedule → ENTER E
Schedule
Connected
1
Network
Sun
Mon
Tue
Wed
Thu
Fri
Description
1
Select between server and external memory.
2
View weekly schedule of content playback.
Select to view detailed information of each event.
Sat
AM
3
View a thumbnail image and brief information of the content.
2
Information
All day
All day
All day
PM
All day
All day
Location:
Internal Memory
3
Date:
**-**-**** ~
**-**-****
Repeat:
Daily
Time:
All day
AM
–– The displayed image may differ depending on the model.
54
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage
device.
This option is useful when assigning the same settings to several products.
HOME
→ Clone Product → ENTER E
MENU
When a duplicate file is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
3
Clone Product
–– The displayed image may differ depending on the model.
Select Export to export the settings.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Cloning file found. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
–– Import from External Storage: Copy settings saved on an external storage device to the product.
–– Export to External Storage: Copy settings on the product to an external storage device.
――After configuration is complete, the product is rebooted automatically.
55
ID Settings
HOME
→ ID Settings → ENTER E
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Press u/d to select a number, and press E.
――Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
ID Settings
•• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•• RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
–– The displayed image may differ depending on the model.
56
Video Wall
HOME
→ Video Wall → ENTER E
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.
Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
•• Off / On
Video Wall
Horizontal x Vertical
This feature automatically splits a videowall display based on a videowall matrix configuration.
Enter the videowall matrix.
–– The displayed image may differ depending on the model.
The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices
can be set within the range 1 and 15.
――A videowall display can be split into a maximum of 100 screens.
――The Horizontal x Vertical option is only enabled when Video Wall is set to On.
57
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form
the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired
number. Press the E button.
――Screen Position allows you to split the screen into a maximum of 100 views (15x15).
――The Screen Position option is only enabled when Video Wall is set to On.
――To use the function, make sure Horizontal x Vertical is configured.
Format
Select how to display images on the videowall display.
•• Full: Display images in full screen with no margin.
•• Natural: Display images in the original aspect ratio without enlarging or reducing the size.
――The Format option is only enabled when Video Wall is set to On.
58
Network Status
HOME
Check the current network and Internet connection.
→ Network Status → ENTER E
Network Status
–– The displayed image may differ depending on the model.
59
Picture Mode
HOME
→ Picture Mode → ENTER E
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
•• Shop & Mall
Suitable for shopping malls.
–– Select either Video/Image or Text depending on the picture mode.
•• Office & School
Suitable for offices and schools.
–– Select either Video/Image or Text depending on the picture mode.
•• Terminal & Station
Suitable for bus terminals and train stations.
–– Select either Video/Image or Text depending on the picture mode.
Picture Mode
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Video/Image or Text depending on the picture mode.
–– The displayed image may differ depending on the model.
•• Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration
program Color Expert are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, color, gamma and uniformity, using the color calibration program Color Expert.
–– To download the Color Expert program, visit www.samsung.com/displaysolutions.
60
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time
first.
(On Timer 1 ~ On Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose
the days you want On Timer to turn on your product.
–– The check mark indicates days you’ve selected.
On/Off Timer
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
–– The displayed image may differ depending on the model.
•• Content (when the Source is set to Internal/USB): From the USB device or internal memory device, select a
folder containing content you want to play when the product turns on. Content can include music, photo or
video files.
――This function is available only when a USB device is connected.
――If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function
does not operate correctly.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the
folders assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer.
――The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by
some manufacturers because the product can take too long to recognize these devices.
61
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose
the days you want Off Timer to turn off your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Done
button.
The period will be added to the list of holidays.
–– Start: Set the start date of the holiday.
–– End: Set the end date of the holiday.
――Delete: Delete selected items from the list of holidays.
――Edit: Select a holiday item and then change the date.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
–– Press E to select the On Timer and Off Timer settings you do not want to activate.
–– The selected On Timer and Off Timer will not activate.
62
Ticker
HOME
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
→ Ticker → ENTER E
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Font Options: Specify the text font and color for the message.
•• Position: Select an orientation to display a Message.
•• Scroll: Specify the scroll Direction and Speed for the message.
•• Preview: Preview configured caption settings.
Ticker
–– The displayed image may differ depending on the model.
63
URL Launcher
HOME
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
――To use the URL Launcher feature, set Play via to URL Launcher in System.
→ URL Launcher → ENTER E
URL Launcher
URL Launcher
–– The displayed image may differ depending on the model.
64
URL Launcher Settings
HOME
→ URL Launcher Settings → ENTER E
•• Install Web App: Enter URL to install the web applocation.
•• Install from USB Device: Install the web applocation from the USB storage device.
•• Uninstall: Remove the installed web application.
•• Timeout Setting: Set the timeout period for connecting to the URL.
•• Developer Mode: Enable developer mode.
URL Launcher
Settings
–– The displayed image may differ depending on the model.
65
Approving a connected device from the
server
――First configure the server Server Network Settings before device approval.
1
Access the server you have assigned to your device.
2
Enter your ID and password to log in.
4
Select Unapproved from the sub-menus.
5
Select the device from the list and click the Approve button.
6
Enter the information required to approve the device.
――Device Name: Enter the device name.
――Device Group: Select
to specify the group.
――Location: Enter the current location of the device.
3
Select Device from the top menu bar.
――Expired: Set expiry date for the device's approval. If you do not want to set the expiry
date, select Never expired.
――Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing
the device ID in the details.
66
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
7
Select the All menu to check that the device has been registered.
8
When the device is approved by the server, the schedule registered in the selected group
1
Select Device from the side menu bar.
――For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's
2
Select your device.
――If a device is deleted from the list of devices approved by the server, the device will reboot
3
Select Edit → Setup.
4
Select Time Zone.
will be downloaded to the device. The schedule will run after it is downloaded.
manual>.
to reset its settings.
――When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
――The time on the product can be changed from the server as shown in step 3.
――Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Lite Server user's manual>.
67
Chapter 06
Screen Adjustment
Configure the Picture settings (Backlight, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
MENU m → Picture → Picture Mode → ENTER E
•• Shop & Mall
Suitable for shopping malls.
–– Select either Video/Image or Text depending on the picture mode.
Picture
Shop & Mall
Picture Mode
·
·
·
Backlight
100
Contrast
70
Brightness
45
Sharpness
65
50
Color
Tint (G/R)
G50
R50
•• Office & School
Suitable for offices and schools.
–– Select either Video/Image or Text depending on the picture mode.
•• Terminal & Station
Suitable for bus terminals and train stations.
–– Select either Video/Image or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Video/Image or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, color, gamma and uniformity settings customized using the color calibration
program Color Expert are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, color, gamma and uniformity, using the color calibration program Color Expert.
–– To download the Color Expert program, visit www.samsung.com/displaysolutions.
–– The displayed image may differ depending on the model.
68
Backlight / Contrast / Brightness
/ Sharpness / Color / Tint (G/R)
Your product has several options for adjusting picture quality.
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be
adjusted accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
MENU m → Picture → ENTER E
――To adjust Color and Tint (G/R), set Picture Mode to Video/Image.
Picture
Picture Mode
·
·
·
Shop & Mall
Backlight
100
Contrast
70
Brightness
45
Sharpness
65
Color
50
Tint (G/R)
G50
R50
–– The displayed image may differ depending on the model.
69
Color Temperature
Adjust the color temperature (Red / Green / Blue). (Range: 2800K–16000K)
――Enabled when Color Tone is set to Off.
MENU m → Picture → Color Temperature → ENTER E
――If Picture Mode is set to Calibration, Color Temperature is disabled.
Picture
Color Temperature
16000K
–– The displayed image may differ depending on the model.
White Balance
2 Point
Adjust the color temperature for a more natural picture.
MENU m → Picture → White Balance → ENTER E
•• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
Picture
White Balance
•• Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•• Off / On
Interval: Select interval to adjust.
–– The displayed image may differ depending on the model.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Suitable for environments where videowall display are used.
――Some external devices may not support this function.
――Enabled when Picture Mode is set to Office & School (Video/Image).
70
Gamma
Adjust the primary color intensity.
――If Picture Mode is set to Calibration, Gamma is disabled.
MENU m → Picture → Gamma → ENTER E
Picture
Gamma
0
–– The displayed image may differ depending on the model.
Calibrated Value
Select whether to apply the brightness, color, gamma and uniformity settings customized using the color calibration
program Color Expert to the Information and Advertisement modes.
MENU m → Picture → Calibrated Value → ENTER E
•• Don't Apply / Apply
――To download the Color Expert program, visit www.samsung.com/displaysolutions.
――If Picture Mode is set to Calibration, Calibrated Value is disabled.
Picture
Calibrated Value
Don't Apply
–– The displayed image may differ depending on the model.
71
――If Picture Mode is set to Calibration, Advanced Settings is disabled.
Advanced Settings
MENU m → Picture → Advanced Settings → ENTER E
High
Black Tone
Darkest
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
HDMI UHD Color
Motion Lighting
Adjust the screen contrast.
•• Off / Low / Medium / High
Advanced Settings
Dynamic Contrast
Dynamic Contrast
On
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
――Enabled when Picture Mode is set to Video/Image.
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
–– The displayed image may differ depending on the model.
•• Off / Red / Green / Blue
――Enabled when Picture Mode is set to Video/Image.
Color Space
Adjusts the range and variety of colors (the color space) available to create images.
•• Auto / Native / Custom
――To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
――Enabled when Picture Mode is set to Video/Image.
72
HDMI UHD Color
Advanced Settings
Dynamic Contrast
Enable to optimize picture quality for HDMI UHD connection.
High
Black Tone
Darkest
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
•• HDMI1 (Off / On)
•• HDMI2 (Off / On)
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
――Enabled when Picture Mode is set to Text.
HDMI UHD Color
Motion Lighting
On
–– The displayed image may differ depending on the model.
73
Picture Options
Color Tone
If Picture Mode is set to Text
MENU m → Picture → Picture Options → ENTER E
•• Off / Cool / Standard / Warm
If Picture Mode is set to Video/Image
•• Off / Cool / Standard / Warm1 / Warm2
――If Picture Mode is set to Calibration, Color Tone is disabled.
Picture Options
Color Tone
Off
Digital Clean View
Auto
HDMI Black Level
Auto
Film Mode
Off
Smart LED
On
Dynamic Backlight
Off
――Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
Reduce picture noise to avoid distractions such as flickering.
•• Off / Auto
――If Picture Mode is set to Calibration, Digital Clean View is disabled.
–– The displayed image may differ depending on the model.
74
HDMI Black Level
Picture Options
Color Tone
Selects the black level on the screen to adjust the screen depth.
Off
Digital Clean View
Auto
HDMI Black Level
Auto
•• Auto / Low / Normal
――Available only in HDMI 1 and HDMI 2 mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
Film Mode
Off
This mode is suitable to view movies.
Smart LED
On
Sets the product to automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
Dynamic Backlight
Off
•• Off / Auto1 / Auto2
――This option can be configured if the input source supports 480i, 576i or 1080i.
――This option is not supported when a PC is connected.
–– The displayed image may differ depending on the model.
Smart LED
Automatically adjust brightness of individual areas on screen for maximum contrast.
•• Off / On
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•• Off / On
――Enabled when Picture Mode is set to Video/Image.
75
Picture Size
choose size and aspect ratio picture displayed on screen.
MENU m → Picture → Picture Size → ENTER E
Picture Size
Picture Size
Picture Size
Different screen adjustment options are displayed depending on the current input source.
――Available ports may differ depending on the model.
•• 16:9 Standard: Sets the picture to 16:9 Standard wide mode.
16:9 Standard
· Fit to Screen
· Zoom/Position
•• Custom: Changes the resolution to suit the user's preferences.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen
burn) which is not covered by the warranty.
Fit to Screen
–– The displayed image may differ depending on the model.
Adjusts the picture position. When selected, the full program image will be displayed. No part of the image will be
cut off.
•• Off / On / Auto
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI 1, HDMI 2
(1080i/1080p). Picture Size must be set to Custom for the option to be available.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen. The picture will
be set to its default position.
76
Picture Off
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
MENU m → Picture → Picture Off → ENTER E
Picture
Picture Off
–– The displayed image may differ depending on the model.
Reset Picture
Resets your current picture mode to its default settings.
MENU m → Picture → Reset Picture → ENTER E
Picture
Reset Picture
–– The displayed image may differ depending on the model.
77
Chapter 07
OnScreen Display
Display Orientation
Onscreen Menu Orientation
Configure the menu screen.
MENU m → OnScreen Display → Display Orientation → ENTER E
•• Landscape: Display the menu in landscape mode (default).
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
Display Orientation
·
Onscreen
Menu Orientation
Landscape
Source Content Orientation
Landscape
Aspect Ratio
Full Screen
Source Content Orientation
Rotate the product screen orientation.
•• Landscape: Display the screen in landscape mode (default).
•• Portrait: Display the screen in portrait mode.
Aspect Ratio
Set the rotated screen to be either full screen or original.
–– The displayed image may differ depending on the model.
•• Full Screen: Display the rotated screen in full screen.
•• Original Ratio: Display the rotated screen in the original aspect ratio.
――Available only when Onscreen Menu Orientation is set to Portrait.
――Available only when Source Content Orientation is set to Portrait.
78
Screen Protection
Auto Protection Time
MENU m → OnScreen Display → Screen Protection → ENTER E
Screen Protection
Auto Protection Time
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to
prevent the formation of burnt in ghost images on the screen.
•• Off / 2 hours / 4 hours / 8 hours / 10 hours
Screen Burn Protection
Off
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
The Screen Burn Protection Time setting allows you to program the time between movements of the picture in
minutes.
–– The displayed image may differ depending on the model.
Pixel Shift
Minimize image retention by finely moving pixels horizontally or vertically.
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min. ~ 4 min.
4 min.
――The Pixel Shift value may differ depending on the product size and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a
defect in the product.
79
Timer
Screen Burn Protection
You can set the timer for Screen Burn Protection.
Pixel Shift
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
Timer
Immediate Display
Off
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time
to End Time).
――Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
–– The displayed image may differ depending on the model.
•• Mode: Select a screen protective pattern to display.
–– Pixel: Pixels on the screen alternate black continuously.
–– Rolling Bar: A vertical bar moves left to right.
–– Fading Screen: The entire screen becomes brighter, then darker.
――The Rolling Bar and Fading Screen patterns appear only once regardless of the specified repeat period or
time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
――Enabled when Timer is set to Repeat and Mode is set to Pixel.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
80
Immediate Display
Screen Burn Protection
Select the screen saver you want to display immediately.
•• Off / Pixel / Rolling Bar / Fading Screen
Pixel Shift
Timer
Immediate Display
Off
–– The displayed image may differ depending on the model.
81
Message Display
Source Info
Select whether to display the source OSD when the input source changes.
MENU m → OnScreen Display → Message Display → ENTER E
•• Off / On
No Signal Message
Message Display
Source Info
On
No Signal Message
On
MDC Message
On
Download Status Message
Off
Select whether to display the no-signal OSD when no signal is detected.
•• Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•• Off / On
Download Status Message
–– The displayed image may differ depending on the model.
Select to display the status when downloading content from a server or other device.
•• Off / On
82
Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to
other functions on your PC.
MENU m → OnScreen Display → Language → ENTER E
OnScreen Display
Language
English
–– The displayed image may differ depending on the model.
Reset OnScreen Display
This option returns the current settings under OnScreen Display to the default factory settings.
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
OnScreen Display
Reset OnScreen Display
–– The displayed image may differ depending on the model.
83
Chapter 08
Network
Network Status
Open Network Settings
MENU m → Network → Network Status → ENTER E
MENU m → Network → Open Network Settings → ENTER E
You can check the current network and Internet status.
Configure network settings to use various smart hub features such as Internet search, content
sharing through a home network and feature updates.
Network type
•• Wired
84
Network Settings (Wired)
•• Depending on how your network is configured, you may be able to attach your product to
your LAN by connecting the LAN port on the back of your product directly to a network
wall outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an external modem using a LAN cable.
See the diagram below.
LAN
The LAN Port on the Wall
RJ45
LAN
External Modem
(ADSL / VDSL)
The Modem Port on the Wall
Modem Cable
RJ45
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an IP Sharer which is connected to an external modem. Use LAN cable for the
connection. See the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
RJ45
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports
the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product
needs to access the Internet so you do not have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you
must enter the IP address, subnet mask, gateway, and DNS values manually on your product
Cable Setup Screen when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
LAN Cable
85
Set the network connection to use Internet services such as perform software upgrades.
2
In the pop-up menu that appears, click Status.
Automatic Open Network Settings (Wired)
3
On the dialog that appears, click the Support tab.
Connect to the network using a LAN cable.
4
On the Support Tab, click the Details button. The Network connection values are
Make sure a LAN cable is connected first.
displayed.
How to set up automatically
1
Set Network type to Wired from the Open Network Settings page.
2
Press the Connect button to start Open Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
3
How to set up manually
1
Set Network type to Wired from the Open Network Settings page.
2
Press the Connect button to start Open Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Open Network Settings (Wired)
3
verification process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
the entry process for each field in the IP Address.
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
6
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
The network test screen appears and the verification process starts. Press Stop. The
When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
86
Server Network Settings
Proxy Server
Set up your proxy server connection and related functions.
MENU m → Network → Server Network Settings → ENTER E
Connect to Server
Off / On
•• Address / Port / ID / Password
――Address / Port / ID and Password are enabled only when Proxy Server is set to On.
To run Player connect to a network.
•• Server Address / SSL / Port
――If the SSL option is enabled, the server is configured to use https and data transfer is
encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
MagicInfo Mode
Device Name
MENU m → Network → Device Name → ENTER E
Select or enter a device name.
This name can be shown on network remote controls over the network.
•• [Signage]Display 1 ~ 6 / User Input
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•• Lite / Premium
Server Access
Select a method to connect the server network.
•• Allow / Deny
FTP Mode
Specify the FTP operating mode.
•• Active / Passive
87
Chapter 09
System
Accessibility
Menu Transparency
Adjust transparency of menu box.
MENU m → System → Accessibility → ENTER E
System
Accessibility
Start Setup
•• High / Low
High Contrast
Set the background and font to high-contrast colors in Menu. Menu transparencies become opaque when the
option is selected.
•• Off / On
Time
Enlarge
Auto Source Switching
Set whether to enlarge highlighted item in Menu.
Power Control
•• Off / On
Eco Solution
Fan & Temperature
–– The displayed image may differ depending on the model.
88
Start Setup
Go through the initial setup steps like you did the first time you used this product.
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
MENU m → System → Start Setup → ENTER E
System
Accessibility
Start Setup
Time
Auto Source Switching
Power Control
Eco Solution
Fan & Temperature
–– The displayed image may differ depending on the model.
89
Time
You can configure Clock Set or Sleep Timer. Configure various time-related settings.
――Press the INFO button if you want to view the current time.
MENU m → System → Time → ENTER E
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Time
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press E when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
Clock Set
NTP Settings
DST
On
Sleep Timer
Off
Power On Delay
0
NTP Settings
Set up the server URL and time zone to use the network time.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
–– The displayed image may differ depending on the model.
•• Start Date: Set the start date of Daylight Saving Time.
•• End Date: Set the end date of Daylight Saving Time.
•• Time Offset: Select the correct time offset your timezone.
――Start Date, End Date and Time Offset are enabled only when DST is set to On.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
90
Auto Source Switching
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the
display will automatically search the different video input sources for active video.
MENU m → System → Auto Source Switching → ENTER E
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
Auto Source Switching
The Primary Source selection will be activated, if the current video source is not recognized.
Auto Source Switching
Off
Primary Source Recovery
Off
Primary Source
All
Secondary Source
HDMI 1
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
–– The displayed image may differ depending on the model.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
――The Secondary Source function is disabled if Primary Source is set to All.
91
Power Control
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
MENU m → System → Power Control → ENTER E
Max. Power Saving
Power Control
Auto Power On
Off
Max. Power Saving
On
Standby Control
On
Network Standby
Off
Power Button
•• Off / On
Power On Only
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•• Off / On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message No Signal will appear if no source device is connected.
•• Off
The message No Signal will appear if no input signals are detected.
–– The displayed image may differ depending on the model.
――If No Signal is displayed although a source device is connected, check the cable connection.
――If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•• On
Power-saving mode will activate if no input signals are detected.
92
Network Standby
Power Control
This feature keeps the network power on when the product turns off.
Auto Power On
Off
Max. Power Saving
On
Standby Control
On
Network Standby
Off
Power Button
Power On Only
•• Off / On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•• Power On Only: Set the power button to turn on the power.
•• Power On/Off: Set the power button to turn on/off the power.
–– The displayed image may differ depending on the model.
93
Eco Solution
Energy Saving Mode
Reduce the power consumption by adjusting the screen brightness.
MENU m → System → Eco Solution → ENTER E
•• Off / Low / Medium / High
Eco Sensor
Eco Solution
Energy Saving Mode
Off
Eco Sensor
Off
Screen Lamp Schedule
Off
No Signal Power Off
Off
Auto Power Off
Off
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•• Off / On
――If the screen contrast is not sufficient, set the Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with
energy standards.
Min. Backlight
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest
backlight mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
–– The displayed image may differ depending on the model.
94
Screen Lamp Schedule
Eco Solution
Energy Saving Mode
Off
Screen Lamp Schedule
Eco Sensor
Off
Enable or disable the lamp schedule.
Screen Lamp Schedule
Off
No Signal Power Off
Off
Auto Power Off
Off
•• Off / On
Schedule1, Schedule2
Time
The panel brightness will change to the brightness set in Lamp at a specified time.
Lamp
–– The displayed image may differ depending on the model.
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•• 0 ~ 100
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•• Off / 15 min. / 30 min. / 60 min.
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
•• Off / 4 hours / 6 hours / 8 hours
95
Fan & Temperature
MENU m → System → Fan & Temperature → ENTER E
System
Fan & Temperature
–– The displayed image may differ depending on the model.
Protects the product by detecting the fan speed and internal temperature.
Fan Control
Selects auto or manual for the fan speed settings.
•• Auto / Manual
Fan Speed Setting
Sets the fan speed within a range of 0 and 100.
――Enabled when Fan Control is set to Manual.
Outdoor Mode
To use the product at a low temperature below 0˚C, make sure to set Outdoor Mode to "On."
This feature keeps the internal temperature of the product steady so that the product can start properly when it is
powered on.
•• Off / On
――Do not disconnect the power cable when this feature is set to "On."
――The product consumes more power when it is turned off if this feature is set to "On" rather than to "Off."
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is
acceptable.
The default temperature is set to 90 °C.
The recommended operating temperature for this product is 75 to 90 °C (based on an ambient temperature of 50 °C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the
temperature continues to rise, the product will power off to prevent overheating.
96
Input Device Manager
MENU m → System → Input Device Manager → ENTER E
Input Device Manager
Configure options for external input devices connected to the product.
Keyboard Language
Configure the key combination used to change the input language.
Keyboard Type
Keyboard Language
Specify the keyboard type.
Keyboard Type
Input Language Shortcut
Input Language Shortcut
Select shortcut keys for switching between input languages.
–– The displayed image may differ depending on the model.
Play via
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
MENU m → System → Play via → ENTER E
•• MagicInfo / URL Launcher
System
Play via
MagicInfo
–– The displayed image may differ depending on the model.
97
Change PIN
MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
The product has memorized your new PIN.
――Default password: 0 - 0 - 0 - 0
System
Change PIN
–– The displayed image may differ depending on the model.
98
Security
Safety Lock On
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
MENU m → System → Security → ENTER E
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control,
will be locked by the Safety Lock On function.
Security
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0-0-0-0).
Safety Lock On
Power On Button
USB Auto Play Lock
Remote Management
Power On Button
On
On
Allow
Turn on this feature to enable the remote control's Power button to turn on the device while Safety Lock On is
enabled.
•• Off / On
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
–– The displayed image may differ depending on the model.
•• Off
Play MagicInfo content saved on the USB device automatically.
•• On
Do not play MagicInfo content saved on the USB device automatically.
――Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
Remote Management
You can Allow or Deny external commands to access your device via a network.
The changed setting remains even after the product is turned off and on using the Panel key or Power switch.
•• Allow / Deny
99
General
Smart Security
The security provided to protect your display device and connected storage devices against viruses includes.
MENU m → System → General → ENTER E
Scan
Inspect your display device and connected storage devices to check for viruses.
General
Isolated List
Smart Security
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Custom Logo
Off
Game Mode
Off
This is the list of items that have been Isolated for containing viruses.
Real-Time Monitoring
Scans for viruses by monitoring the display device in real time.
Monitoring Results
Check the list of files, networks, and processes that have been blocked.
–– The displayed image may differ depending on the model.
100
Anynet+ (HDMI-CEC)
General
Smart Security
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Custom Logo
Off
Game Mode
Off
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your
Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+
feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
•• Off / On
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
–– The displayed image may differ depending on the model.
101
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your
product off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On
in the System menu.
I want to exit Anynet+.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears
on the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not
play.
•• You cannot use the play function when initial setup is in progress.
The connected device is not
displayed.
•• Check whether or not the device supports Anynet+ functions.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to
Anynet+.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected,
please repeat the device scan.
102
HDMI Hot Plug
General
This feature is used to activate the time delay to turn on a HDMI source device.
Smart Security
•• Off / On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Custom Logo
Off
Game Mode
Off
Custom Logo
You can download, select, and set the display time of a custom logo that appears when the product turns on.
•• Custom Logo
――You can select a custom logo (image/video) or turn off the custom logo display.
――You must download the custom logo from an external USB device to set the custom logo.
•• Logo Display Time
――If the type of custom logo is Image, you can set the Logo Display Time.
–– The displayed image may differ depending on the model.
•• Download Logo File
――You can download a custom logo into the product from an external USB device.
――The file name of the custom logo you want to download must be saved as “samsung” in all small letters.
――When there are multiple numbers of external USB connections, the product will attempt to download the
custom logo from the last device that has been connected to the product.
Custom logo file restrictions
•• For image type custom logo, only bitmap files (aRGB 32bpp format) are supported.
•• The resolution of the image type custom logo must be between a minimum of 128x64 and the maximum
screen resolution. (Horizontal/Vertical values of the resolution must be multiples of 4.)
•• For video type custom logo, only TS Stream types are supported.
•• The maximum supported video file is 150 MB. The recommended length of a video file is 20 seconds or less.
103
Game Mode
General
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming
experience by selecting game mode.
Smart Security
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Custom Logo
Off
Game Mode
Off
•• Off / On
――Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
–– The displayed image may differ depending on the model.
Reset System
This option returns the current settings under system to the default factory settings.
MENU m → System → Reset System → ENTER E
System
Reset System
–– The displayed image may differ depending on the model.
104
Chapter 10
Support
Software Update
Contact Samsung
MENU m → Support → Software Update → ENTER E
MENU m → Support → Contact Samsung → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off
View this information when your product does not work properly or when you want to upgrade
the software.
and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their
default settings. We advise you to write down your settings so that you can easily reset them
after the upgrade.
Update now
Update the software to the latest version.
――Current version: This is the software version already installed in the product.
Auto Update
You can find information regarding our call centers and how to download products and
software.
――Contact Samsung and find the product Model Code and Software Version.
Reset All
MENU m → Support → Reset All → ENTER E
This option returns all the current settings for a display to the default factory settings.
This feature automatically updates the product when not in use.
•• Off / On
105
Chapter 11
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
–– Before calling Samsung Customer
Service Center, test your product
as follows. If the problem persists,
contact Samsung Customer Service
Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
–– If the screen remains blank, check
the PC system, video controller and
cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
106
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is
secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product
and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,
adjust the screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update
the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to
adjust the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Depending on the type of external device, the screen may not display properly. In this case,
connect it with the HDMI Hot Plug function turned On.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
107
Screen issue
The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to the
Additional Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off
after 10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does
not mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analog and digital
products.
108
Screen issue
The brightness and color do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Color, Brightness and
Sharpness.
Go to System and adjust the Energy Saving Mode settings.
Reset the screen settings to the default settings.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Center to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or
if the signal is not stable. To resolve the issue, change the PC resolution to the recommended
resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and
bottom of the screen.
Change the screen size setting to full screen on the product or source device.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
109
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
The monitor appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a
wall, it is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
When I try to change the PC resolution, a message "The
defined resolution is not currently supported." appears.
The message "The defined resolution is not currently supported." appears if the input source
resolution exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colors may not look normal. Video or sound may not be available. This can
occur if a source device that only supports an older version of the HDMI standard is connected
to the product.
Make sure to connect the audio cable to the correct input jack to enable audio.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include
sound. In this case, manually select a sound input.
110
Other issue
HDMI-CEC does not work.
This product does not support the HDMI-CEC feature.
To use several external devices compatible with the HDMI-CEC feature that are connected to
the HDMI IN 1 and HDMI IN 2 ports on the product, turn off the HDMI-CEC features on all the
external devices. External devices include Blu-ray and DVD players.
Operating an external device when its HDMI-CEC feature is enabled may automatically stop
other external devices.
To change HDMI-CEC settings, refer to the device user guide or contact the device
manufacturer for assistance.
111
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor
and adjust the frequency in Monitor Settings.
–– Refer to the user manual for your
PC or graphics card for further
instructions on adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize
→ Display Settings → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 10: Go to Settings → System → Display → Advanced display settings → Display
adapter properties → Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
•• Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust
the resolution.
112
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes →
Display → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver
Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 10: Set power-saving mode in Settings → Personalization → Lock screen →
Screen timeout settings → Power & sleep or BIOS SETUP on the PC.
113
Chapter 12
Specifications
General
–– Size
Model Name
Panel
OH75F
Size
189.3 cm
Display area
1650.24 mm (H) x 928.26 mm (V)
Power Supply
–– Display area
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
H
V
Environmental
considerations
Operating
Temperature : -30 ℃ – 50 ℃ (-22 °F – 122 °F)
* For installing the housing, keep the internal temperature at 40 °C or below.
Humidity : 10% – 80%, non-condensing
Storage
Temperature : -20 °C – 50 °C (-4 °F – 122 °F)
Humidity : 5% – 95%, non-condensing
114
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system
optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does
not affect product performance.
――This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures.
――For detailed device specifications, visit the Samsung Electronics website.
115
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the
vertical frequency to 60Hz using the CDT product before you exchange it with the LCD product.
–– Horizontal Frequency
The time required to scan a single
line from the left to the right side of
the screen is called a horizontal cycle.
The reciprocal number of a horizontal
cycle is called horizontal frequency.
Horizontal frequency is measured in
kHz.
–– Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
Model Name
Synchronization
Resolution
OH75F
Horizontal Frequency
30 – 80 kHz
Vertical Frequency
60 – 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
116
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
117
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
118
Chapter 13
Appendix
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a
service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
•• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's
program.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorized electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged.
So please read User Manual first.
•• If customer requests software installation and setup for the product.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through
home-shopping or online.
119
Optimum Picture Quality and Afterimage
Burn-in Prevention
Black Matrix
Common
Electrode (ITO)
Color-Filter
Optimum Picture Quality
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million
(1ppm) may be brighter or darker on the panel. This does not affect product performance.
–– The number of sub-pixels by panel type: 6,220,800
Source
Drain
•• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
–– Activate power-saving mode or a dynamic screen saver if you will not be using the
product for an extended period of time.
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Gate
TFT
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal
operation refers to a continuously changing video pattern. If the LCD panel displays a fixed
pattern for an extended period of time, a slight voltage difference may occur between the
electrodes in pixels that control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals
thinner. When this occurs, a previous image can remain on the screen when the pattern changes.
To prevent this, the accumulated voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
120
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
–– Power off the product for 2 hours after using it for 12 hours.
–– Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
–– Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
•• Regular color Change
–– Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
•• Avoid combinations of a text color and background color of contrasting brightness.
(Brightness: refers to the lightness or darkness of a color which varies depending on the
amount of light emitted.)
――Avoid using gray as it may contribute to afterimage burn-in.
――Avoid using colors of contrasting brightness (black and white; gray).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
•• Regular Text color Change
–– Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
–– Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
FLIGHT
: TIME
OZ348
: 20:30
[ Step 3 ]
–– Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4
hours.
121
License
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS, Inc. DTS, the Symbol, DTS in combination with the
Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS Express,
and DTS Neo2:5 are registered trademarks or trademarks of DTS, Inc.
in the United States and/ or other countries. © DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.
This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with
advanced features (multi-language subtitles, multiple audio tracks, chapters, smooth
FF/RW, etc.) streamed to your device.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Center
or send email to oss.request@samsung.com.
122
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of
sending pixels that form an image
progressively. A larger number of
pixels will deliver a clearer and more
vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every
other line of pixels is scanned from
top to bottom first and then the
remaining lines of pixels (that were
not scanned) are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a
horizontal line from the top to the
bottom of a screen progressively.
Interlace mode displays the odd
number lines first and the even
number lines next. Non-interlace
mode is mainly used in monitors
as it produces screen clarity and
interlace mode is mainly used in
TVs.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light
that flickers) to display an image for
a viewer to see. The rate of a single
image being displayed repeatedly
per second is called vertical
frequency or refresh rate. Vertical
frequency is measured in Hz.
E.g. 60Hz refers to a single image
being displayed 60 times in one
second.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces
a higher resolution. Dot pitch refers
to the distance between the shortest
distance between dots of the same
color. Dot pitch is measured in
millimeters.
Horizontal Frequency____ The
time required to scan a single line
from the left to the right side of
the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
Source____ Input source refers to
a video source device connected to
the product such as a camcorder or
video or DVD player.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between
a monitor and PC to produce an
optimum display environment.
The product uses VESA DDC
(international standard) to execute
Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels)
and vertical dots (pixels) that
form a screen. It represents the
level of display detail. A higher
resolution enables more data to
be displayed on the screen and is
useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080
consists of 1,920 horizontal pixels
(horizontal resolution) and 1,080
vertical pixels (vertical resolution).
DVD (Digital Versatile Disc)____
DVD refers to a CD-sized mass
storage disk where you can save
multimedia (audio, video or game)
applications using MPEG-2 video
compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition
video source by using a single cable
without compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is
an application that allows multiple
display devices to be controlled
simultaneously using a PC.
Communication between a PC and
monitor takes place using RS232C
(serial data transmission) and RJ45
(LAN) cables.
123
Download PDF

advertising