Samsung LN-R469D Manual de Usuario

00910A-03.qxd
10/20/05 3:59 PM
Page 1
LN-R269D
LN-R329D
LN-R409D
LN-R469D
This device is a Class B digital apparatus.
BN68-00910A-03
Register your product at
www.samsung.com/global/register
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the Set-Top
Box output is 480p).
• Digital Ready TV: When you select
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
the wide screen (16:9) mode to
watch an SD-grade
digital broadcast (and the Set-Top
Box output is 1080i).
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the Set-Top Box output is
1080i).
When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen
size "16:9" or "Panorama" selected, you will
be able to watch the program but the top and
bottom edges of the screen will be cropped.
Note: If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
• Integrated Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a Set-Top Box).
• When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Page 2
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• When you watch a DVD, CD or a
video in wide-screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note: If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 3
CONTENTS
Chapter 1: General Information
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . .
Buttons on the Lower-Right Part of the Panel . . . . . . . . . . . . . .
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Panel Jacks (LN-R329D, LN-R409D, LN-R469D) . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . .
If the remote control doesn’t work . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
2
2
3
4
5
7
7
Chapter 2: Connections
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 8
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . . 8
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . . 9
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to a Cable Box that Descrambles All Channels . . . 10
Connecting to a Cable Box that Descrambles Some Channels . 10
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a Camcorder (LN-R329D, LN-R409D, LN-R469D) . . . . . . 15
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting a DVD Player/Set-Top Box via DVI . . . . . . . . . . . . . . 16
Connecting a DVD Player/Set-Top Box via HDMI . . . . . . . . . . . . . 16
Connecting a Digital Audio System . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting an Amplifier/DVD Home Theater . . . . . . . . . . . . . . . . 17
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting CableCARD (LN-R409D, LN-R469D) . . . . . . . . . . . . . . . 18
Chapter 3: Operation
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the PRE-CH Button to select the Previous Channel . . . . 19
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
If you want to reset this feature... . . . . . . . . . . . . . . . . . . . . . . 24
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . . 25
Storing Channels in Memory (Automatic Method) . . . . . . . . . 26
Adding and Erasing Channels (Manual Method) . . . . . . . . . . . 28
Setting Up Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Remote Control Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To Select the Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Contents-1
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 4
CONTENTS
Chapter 4: Picture Control
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DNle (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . .
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . .
Swapping the Contents of the PIP and Main image . . . . . . . . .
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Position of the PIP Window . . . . . . . . . . . . . . . .
Changing the Size of the PIP Window . . . . . . . . . . . . . . . . . . .
My Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Easy Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detail Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dynamic Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brightness Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
39
40
41
43
44
44
45
46
46
47
47
48
48
49
50
51
Chapter 5: Sound Control
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Trusurround XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing a Multi-Channel Sound(MTS) track - Digital . . . . . . . . .
Preferred Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Track Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting the Internal Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing a Digital Sound Format . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the On/Off Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
53
54
55
55
56
57
58
59
60
Chapter 6: Channel Control
Selecting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Set-up Your Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . . .
Labeling Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Channel Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing the Channel Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fine Tuning Analog Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the Digital-Signal Strength . . . . . . . . . . . . . . . . . . . . . .
LNA (Low Noise Amplifier) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61
62
63
64
65
66
67
68
Chapter 7: PC Display
Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . .
Setting Up Your PC Software (Based on Windows XP) . . . . . .
How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . . . .
Initializing the Screen Position or Color Settings . . . . . . . . . .
Contents-2
69
69
70
71
73
75
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 5
CONTENTS
Chapter 8: Time Setting
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Option 1:Setting the Clock Manually . . . . . . . . . . . . . . . . . . .
Option 2:Setting the Clock Automatically . . . . . . . . . . . . . . . .
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
76
78
80
81
Chapter 9: Function Description
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Selecting the Film Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Using the Color Weakness Enhancement Option . . . . . . . . . . . . . . . 85
Viewing Closed Captions (On-Screen Text Messages) - Analog . . . 87
Viewing Closed Captions (On-Screen Text Messages) - Digital . . . 89
Menu Transparency Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Setting the Function Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Setting Up Your Personal ID Number(PIN) . . . . . . . . . . . . . . . 95
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . . 96
How to Set up Restrictions Using the
“TV Parental Guidelines” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
How to Set up Restrictions Using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X, NR . . . . . . . . . . . . . . . . . . . . . . . 99
How to Set up Restrictions Using the ‘Canadian English’ . . . 101
How to Set up Restrictions Using the ‘Canadian French’ . . . 102
How to Reset the TV after the V-Chip Blocks a Channel
(“Emergency Escape”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Electronic Program Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Viewing the Electronic Program Guide . . . . . . . . . . . . . . . . . 104
Using the Electronic Program Guide . . . . . . . . . . . . . . . . . . . 105
Viewing Information about a Single Channel . . . . . . . . . . . . 106
Viewing Information about Channels . . . . . . . . . . . . . . . . . . 107
Remind List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Viewing the Remind List . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
To View the Remind List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
To Remove the Scheduled Programs . . . . . . . . . . . . . . . . . . . 110
Using the CableCARD (Sold separately) (LN-R409D, LN-R469D) . . 111
Displaying CableCARD related information . . . . . . . . . . . . . 111
Using the CableCARD Setup Function (LN-R409D, LN-R469D) . . . . 112
CableCARD Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Channel List Reorganization . . . . . . . . . . . . . . . . . . . . . . . . . 113
Chapter 10: Appendix
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Stand (LN-R269D, LN-R329D) . . . . . . . . . . . . . . . . . .
Disconnecting the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Wall Mount Kit (LN-R269D) . . . . . . . . . . . . . . . . . . .
Installing the Wall Mount Kit (LN-R329D, LN-R409D) . . . . . . . . . . .
Wall Installation Instructions (LN-R469D) . . . . . . . . . . . . . . . . . . .
How to assemble the Stand-Base (LN-R469D) . . . . . . . . . . . . . . . .
Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . .
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . .
CableCARD and Digital Cable Ready TVs . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents-3
114
116
116
117
118
119
123
124
124
125
126
128
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 1
Chapter 1
G E N E R A L I N F O R M AT I O N
List of Features
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, this TV supports HD broadcasts with no
Set-Top Box needed, and provides simple access with a single remote control.
Excellent Picture Quality
- DNIe technology provides life-like clear images.
- My Color Control: Colors can be set to your preference by adjusting Red, Green, Blue,
Yellow, Pink, and White.
- Dynamic Contrast: Automatically detects the input visual signal and adjusts to create
optimum contrast.
- Brightness Sensor: Adjusts the screen brightness automatically depending on the
brightness of the surrounding environment.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Convenience
- The TV utilizes the HDMI system to implement perfect digital sound and picture quality.
- The Anynet system enables you to easily control Samsung audio-video (AV) devices
from this TV.
- For more information about Anynet, refer to the Anynet AV Owner’s Instructions.
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control
(BN59-00460A)
& Batteries (AAA x 2)
Cover-Bottom
LN-R269D/LN-R329D:
BN63-01947A
LN-R409D: BN63-01938A
LN-R469D: BN63-01810A
Power Cord
(3903-000085)
Stand
LN-R269D: BN96-02203A
LN-R329D: BN96-02202A
English-1
Cleaning Cloth
(BN63-001798A)
Anynet Cable
(BN39-00518B)
Anynet AV
Owner’s
Instructions
Owner’s
Instructions
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 2
G E N E R A L I N F O R M AT I O N
Familiarizing Yourself with Your New TV
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
SOURCE
(POWER)
Displays a menu of all of the available
input sources.
Press to turn the TV on and off.
• LN-R269D
- TV, AV, S-VIDEO, Component 1, Component 2,
PC, HDMI
• LN-R329D / LN-R409D / LN-R469D
- TV, AV 1, AV 2, S-VIDEO 1, S-VIDEO 2,
Component 1, Component 2, PC, HDMI
POWER INDICATOR
Also used to confirm your choice on the
on-screen menu.
Blinks and turns off when the power is on and
lights up in stand-by mode.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot
on the TV.
MENU
Press to see an on-screen menu of
your TV’s features.
– VOL +
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
CH
Press to change channels.
Also press to highlight various items
on the on-screen menu.
English-2
LIGHT DETECTING SENSOR
Adjusts the brightness of the screen
automatically by detecting brightness of the
surrounding environment. This sensor works
when the Brightness Sensor is on.
SPEAKERS
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 3
G E N E R A L I N F O R M AT I O N
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 8-18.
The TV surface can be different depending on the model.
LN-R269D
LN-R329D
LN-R409D / LN-R469D
English-3
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 4
G E N E R A L I N F O R M AT I O N
PC IN
DIGITAL AUDIO OUT (OPTICAL)
Connect to the video and audio output jacks
on your PC.
Connect to a Digital Audio component.
HEADPHONE (LN-R269D)
Connect to the HDMI jack of a device with an HDMI
output. Use the HDMI/DVI
terminal for DVI connection to an
external device. You should use the
DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the connection,
and the 'R -AUDIO -L' terminal on DVI-IN for
sound output.
- HDMI/DVI IN terminal does not support PC.
- No sound connection is needed for an
HDMI to HDMI connection.
HDMI/DVI IN
Connect a set of external headphones for
private listening.
AUDIO OUT
Connect to the audio input jacks on your
Amplifier/Home theater.
Anynet
Refer to “Anynet AV Owner’s Instructions”.
SERVICE
Connector for service only.
ANT IN
COMPONENT IN
Connect to an antenna or to a cable TV system.
(See pages 8-11, 61)
Connect component video/audio from a
DVD/Set-Top Box.
POWER INPUT
AV IN (1)
Connect the supplied power cord.
Video and audio inputs for external
devices, such as a camcorder or VCR.
KENSINGTON LOCK
Refer to “Using the Anti-Theft Kensington
Lock” on page 124.
S-VIDEO IN (1)
Video inputs for external devices with an
S-Video output, such as a camcorder or VCR.
CABLE CARD ( LN-R409D/LN-R469D)
Insert the cableCARD into the slot.
Side Panel Jacks (LN-R329D, LN-R409D, LN-R469D )
Use the left side panel jacks to connect a component that is used only occasionally,
such as a camcorder or video game. (See page 15)
S-VIDEO IN (2)
Video inputs for external devices with an
S-Video output.
AV IN (2)
Video and audio inputs for external devices.
HEADPHONE
Connect a set of external headphones for
private listening.
Speaker
Audio Out
RF
AV, S-Video
Component, PC, HDMI RF
AV, S-VIDEO
Component, PC, HDMI
Internal Mute Off
Speaker Output
Speaker Output
Speaker Output
Sound Output
Sound Output
Sound Output
Internal Mute On
Mute
Mute
Mute
Sound Output
Sound Output
Sound Output
Video No Signal
Mute
Mute
Mute
Mute
Sound Output
Sound Output
When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” and “Digital Output” cannot be adjusted.
English-4
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 5
G E N E R A L I N F O R M AT I O N
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the
remote, always point it directly at the TV. You can also use your remote control to operate
your VCR, Cable box, DVD player, or Set-Top Box.
POWER
Turns the TV on and off. (See page 19)
ANTENNA
Press to select “AIR” or “CABLE”. (See pages 8~11)
GUIDE
Press to display the on-screen Electronic Program Guide (EPG).
(See page 104)
Press to select additional channels (digital and analog) being
broadcast by the same station. For example, to select channel
“54-3”, press “54”, then press “-” and “3”.
MUTE
Press to temporarily cut off the sound. (See page 19)
MENU
Displays the main on-screen menu. (See page 20)
MODE
Selects a target device to be controlled by the Samsung
remote control (TV, VCR, CATV, DVD, STB).
(See pages 29~31)
NUMERIC BUTTONS
Press to change the channel.
PRE-CH
Turns to the previous channel. (See page 19)
CH
and CH
(Channel UP/Down)
Press to change channels. (See page 19)
VOL + and VOL Press to increase or decrease the volume. (See page 19)
SOURCE
Press to display all of the available video sources.
UP / DOWN / LEFT / RIGHT / ENTER
Use to select on-screen menu items and change menu values.
FAV.CH
Press to switch to your favorite channels. (See page 62)
MTS
Press to choose stereo, mono or Separate Audio Program
(SAP broadcast). (See pages 55~56)
PIP
Picture-in Picture ON/OFF. (See page 44)
CH.LIST
Displays the channel list. (See page 64)
English-5
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 6
G E N E R A L I N F O R M AT I O N
Anynet
Press the Anynet button to bring up the Anynet menu.
Refer to “Anynet AV Owner’s Instructions”.
STILL
Press to stop the action during a particular scene.
Press again to resume normal video. (See page 43)
P.SIZE
Press to change the screen size. (See page 41~42)
DNIe
Off : DNIe Demo mode is deactivated.
On : The right-hand side of the screen shows the improved DNIe
image.
The left-hand side of the screen shows the original image.
(See page 40)
SRS
Selects TruSurround XT mode. (See page 54)
SET
Adjusts 5 separate devices - TV, VCR, Cable, DVD, or
Set-Top Box. (See pages 29~31)
INFO
Use to see information on the current broadcast. (See page 20)
EXIT
Press to exit the menu.
SLEEP
Press to select a preset time interval for automatic shut off.
CH
Displays the available channels in sequence. (These buttons
change channels in the PIP window only.) (See page 46)
CAPTION
Controls the caption decoder. (See pages 87~91)
VCR/DVD Functions (Anynet mode only)
- Rewind
- Stop
- Play/Pause
- Fast/Forward
RESET
When your remote does not work, change the batteries and
press the RESET button for 2-3 seconds before use.
English-6
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 7
G E N E R A L I N F O R M AT I O N
Installing Batteries in the Remote Control
1
Slide the Cover out
completely.
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
2
Install two AAA size
batteries.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
3
Replace the cover.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
If the remote control doesn’t work
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
English-7
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 8
Chapter 2
CONNECTIONS
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on page 9.
If you have two antennas, see “Separate
VHF and UHF Antennas” on page 9.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a
300-75 ohm adapter
(not supplied). Use a
screwdriver to tighten
the screws.
2
ANT 1 IN
(CABLE)
Plug the adaptor into
the ANT 1 IN
(CABLE) terminal on
the back of the TV.
English-8
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 9
CONNECTIONS
Antennas with 75-ohm Round Leads
1
ANT 2 IN
(AIR)
Plug the antenna
lead into the ANT 2 IN
(AIR) terminal on the
back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
VHF
UHF
2
Plug the combiner
into the ANT 2 IN
(AIR) terminal on
the bottom of the
rear panel.
ANT 2 IN
(AIR)
VHF
UHF
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
ANT 1 IN
(CABLE)
Plug the incoming
cable into the
ANT 1 IN (CABLE)
terminal on the
back of the TV.
English-9
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 10
CONNECTIONS
Connecting to a Cable Box that Descrambles All Channels
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
ANT IN
ANT OUT
2
ANT 1 IN
(CABLE)
Connect the other end
of this cable to the
ANT 1 IN (CABLE)
terminal on the back
of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
ANT IN
2
Connect this cable
to a two-way splitter.
Incoming
cable
Splitter
3
Connect an RF
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
Incoming
cable
Splitter
Cable Box
English-10
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 11
CONNECTIONS
4
Connect an RF
cable between the
ANT OUT terminal
on the cable box
and the B–IN
terminal on the
RF(A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT 1 IN (CABLE)
terminal on the rear
of the TV.
ANT 1IN
(CABLE)
Incoming
cable
TV Rear
Splitter
Cable Box
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English-11
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 12
CONNECTIONS
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 8-11).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
ANT IN
2
Connect the cable or
antenna to the
ANT IN terminal
on the back of the
VCR.
VCR Rear Panel
Incoming Cable
or Antenna
3
Connect an RF cable
between the
ANT OUT terminal
on the VCR and the
ANT 1 IN (CABLE)
or ANT 2 IN (AIR)
terminal on the TV.
TV Rear Panel
VCR Rear Panel
RF Cable (Option)
English-12
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 13
CONNECTIONS
4
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
AV IN [R-AUDIO-L]
jacks on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable (Option)
RF Cable (Option)
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook
up to the right and left audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
5
Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
AV IN [VIDEO] jack
on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable (Option)
Video Cable (Option)
RF Cable (Option)
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
English-13
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 14
CONNECTIONS
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
TV Rear Panel
VCR Rear Panel
RF Cable (Option)
2
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
AV IN [R-AUDIO-L]
jacks on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable (Option)
RF Cable (Option)
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
AV IN [S-VIDEO] jack
on the TV.
TV Rear Panel
VCR Rear Panel
Audio Cable (Option)
S-Video Cable (Option)
RF Cable (Option)
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
English-14
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 15
CONNECTIONS
Connecting a Camcorder (LN-R329D, LN-R409D, LN-R469D)
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1
Connect an audio
cables between the
AV IN 2 / S-VIDEO 2
[R-AUDIO-L]
jacks on the TV and
the AUDIO OUT jacks
on the camcorder.
TV Side Panel
Camcorder
Audio Cable (Option)
2
Connect a video cable
between the
AV IN 2 / S-VIDEO 2
[VIDEO] (or S-VIDEO)
jack on the TV and
the VIDEO OUT
jack on the
camcorder.
TV Side Panel
S-Video Cable (Option)
Camcorder
or
Video Cable (Option)
Audio Cable (Option)
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
TV Rear Panel
DVD Player Rear Panel
Connect an audio
cable between the
COMPONENT IN 1 or
COMPONENT IN 2
[R-AUDIO-L] jacks on
the TV and
the AUDIO OUT jacks
on the DVD player.
Audio Cable (Option)
2
Connect a
Component Cable
between the
COMPONENT IN 1 or
COMPONENT IN 2
[PR, PB, Y] jacks on
the TV and the
COMPONENT [Y, PB,
PR] jacks on the DVD
player.
DVD Player Rear Panel
TV Rear Panel
Audio Cable (Option)
Component Cable (Option)
Note: For an explanation of Component video, see your DVD player owner's manual.
Be sure to match the component video and audio connections. For example, if connecting
the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
English-15
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 16
CONNECTIONS
Connecting a DVD Player/Set-Top Box via DVI
This can be applied only if there is a DVI Output connector on the external device.
1
DVD Player / Set-Top Box
Connect a DVI to HDMI
cable or DVI-HDMI
Adapter between the
HDMI/DVI connector on
the TV and the DVI
connector on the DVD
player/Set-Top Box.
TV Rear Panel
DVI to HDMI Cable (Option)
2
DVD Player / Set-Top Box
Connect an audio
cable between the
DVI IN [R-AUDIO-L]
jack on the TV and the
AUDIO OUT
jacks on the DVD
player/Set-Top Box.
TV Rear Panel
Audio Cable (Option)
DVI to HDMI Cable (Option)
Connecting a DVD Player/Set-Top Box via HDMI
This can be applied only if there is the HDMI Output connector on the external device.
1
DVD Player Rear Panel
Connect an HDMI
cable between the
HDMI/DVI connector
on the TV and the
HDMI connector on
the DVD player/
Set-Top Box.
TV Rear Panel
HDMI Cable (Option)
What is HDMI?
• HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission
of digital audio and video signals using a single cable without compression.
• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in
size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi-channel digital audio.
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
English-16
01 BN68-00910A-03Eng.qxd
10/20/05 3:28 PM
Page 17
CONNECTIONS
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1
Digital Audio System
Connect an optical
cable between the
DIGITAL AUDIO OUT
(OPTICAL) jacks on
the TV and the Digital
Audio Input jacks on
the Digital Audio
System.
TV Rear Panel
Optical Cable (Option)
Note: 5.1CH broadcasting is possible when it is connected to an external device supporting 5.1CH.
For an explanation of Component video, see your Digital Audio System owner's manual.
Connecting an Amplifier/DVD Home Theater
1
TV Rear Panel
Amplifier/DVD Home Theater
Connect an audio
cable between the
AUDIO OUT
[R-AUDIO-L] on the
TV and AUDIO IN
[R-AUDIO-L] on the
Amplifier/DVD Home
Theater.
Audio Cable (Option)
Connecting a PC
1
TV Rear Panel
PC
Connect a D-Sub
cable between PC IN
[PC] connector on the
TV and the PC output
connector on your
computer.
D-Sub cable (Option)
2
TV Rear Panel
PC
Connect a PC audio
cable between PC IN
[AUDIO] jack on the
TV and the Audio Out
jack of the sound card
on your computer.
PC Audio Cable (Option)
D-Sub cable (Option)
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
English-17
01 BN68-00910A-03Eng.qxd
10/20/05 5:34 PM
Page 18
CONNECTIONS
Connecting CableCARD (LN-R409D, LN-R469D)
You must obtain a CableCARD from a local cable service provider.
TV Rear Panel
CableCARD
RF Cable
1
Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is
displayed on the screen. If the channel information does not exist, the message “Updating
Channel List” is displayed during channel information configuration.
It could take several minutes to update the channel information depending on your cable
service provider.
2
The pairing information containing a telephone number, CableCARD ID, Host ID, and other
information will be displayed in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
3
When the channel information configuration has finished, the message “Updating
Completed” is displayed, indicating that the channel list is now updated.
4
The Channel list can now be displayed by pressing the CH.LIST button.
Note
• Once the channel list has been updated, only the channels on the channel list can be selected.
• Remove the cable card by carefully pulling it out with your hands since dropping the cable card may
cause damage to it.
English-18
01 BN68-00910A-03Eng.qxd
10/22/05 11:16 AM
Page 19
Chapter 3
O P E R AT I O N
Turning the TV On and Off
1
Press the POWER button
on the remote.
You can also use the POWER
button on the front of the panel.
Changing Channels
Using the Channel Buttons
1
Press the CH
/
buttons to change channels.
When you press the CH /
buttons, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See pages 21-28 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
Adjusting the Volume
1
Press the VOL +/– buttons to increase or decrease the volume.
Using Mute
At any time, you can cut off the sound using the MUTE button.
1
Press MUTE and the sound cuts off.
” will appear in
The word “
the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply press the VOL +/- buttons.
English-19
01 BN68-00910A-03Eng.qxd
10/22/05 11:17 AM
Page 20
O P E R AT I O N
Viewing the Display
The display identifies the current channel and the status
of certain audio-video settings.
The screen displays
disappear after about ten seconds.
Press the INFO button once more
or wait approximately 10 seconds
and it disappears automatically.
1
Press the INFO button on the
remote control.
The TV will display the
channel, the type of sound,
and the status of certain
picture and sound settings.
Viewing the Menus
The on-screen menus
disappear from the screen after
about two minutes.
1
With the power on, press
the MENU
button.
The main menu appears
on the screen. Its left
side has six icons:
Input, Picture, Sound,
Channel, Setup, Guide.
2
Use the UP/DOWN
Then press the ENTER
sub-menu.
buttons to select one of the six icons.
button to access the icon’s
3
Press the EXIT button to exit.
English-20
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 21
O P E R AT I O N
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently:
Some OSD can be different depending on the model.
1
Press the POWER button
on the remote control.
The message
“Menu language, Channels
and Time will be set.”
is displayed. Press the
ENTER
button, then
“Select the language of the
OSD” menu is automatically
displayed.
2
Press the ENTER
button
to enter the language.
Press the UP/DOWN
buttons to select language,
then the ENTER
button.
“Select the antennas to
memorize.” menu is
automatically displayed.
3
• If the antenna is connected
to ANT 1(CABLE),
select “CABLE” and if it is
connected to ANT 2
(AIR), select “AIR”.
• If both ANT 1 and ANT 2
are connected, select
the “Air + Cable”.
• If the CableCARD is
inserted into the
“CableCARD” slot on the
rear panel, “Cable” and
“Air+Cable” are not
available.
Press the UP/DOWN
buttons to memorize the
channels of the selected
connection.
Press the ENTER
to select “Start”.
button
English-21
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 22
O P E R AT I O N
4-1
STD, HRC and IRC
identify various types of
cable TV systems.
Contact your local cable
company to identify the
type of cable system that
exists in your particular
area.
At this point the signal
source has been selected.
Proceed to “Storing
Channels in Memory”.
(LN-R269D / LN-R329D)
Press the UP/DOWN
buttons to select “Cable” or
“Air+Cable” then press the
ENTER
button.
Press the UP/DOWN
buttons to select “STD”,
“HRC” or “IRC”, press the
ENTER
button.
4-2
(LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “Digital
Channel”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “STD”,
“HRC” or “IRC”, press the
ENTER
button.
Press the UP/DOWN
buttons to select “Analog
Channel”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “STD”,
“HRC” or “IRC”, press the
ENTER
button.
Press the UP/DOWN
buttons to select “Start”,
then press the ENTER
button to memorize the
channels.
English-22
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 23
O P E R AT I O N
5
The TV will begin
memorizing all of the
available channels.
After all the available
channels are stored, the
Auto program menu
reappears. Press the
ENTER
button when
channel memorization is
complete. “Set to daylight
savings time.” menu is
automatically displayed.
Note
• To stop the search before it has finished, press the ENTER
6
Press the ENTER
button.
Press the UP/DOWN
buttons to select “Yes” or
“No”, then the ENTER
button. “Select your time
zone in which you live”
menu is automatically
displayed.
English-23
button with stop selected.
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 24
O P E R AT I O N
7
Press the UP/DOWN
buttons to highlight the time
zone for your local area
(and to move the highlight
to the appropriate time
zone on the map of the
United States).
Press the ENTER
button. If you have received
a digital signal, the time will
be set automatically.
If not, see page 76 to set
the clock.
8
The message “Completed.
Time will be updated
automatically.” is displayed.
When you have finished,
press the ENTER
button.
If you want to reset this feature...
1
Press the MENU
button.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Plug & Play”.
Press the ENTER
button.
For further details on setting
up options, refer to the
previous page.
Note
• Plug and Play can only be accessed in the TV mode.
English-24
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 25
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an antenna or a cable system).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the ENTER
select “Antenna”.
button
Press the UP/DOWN
buttons to select “Air” or
“Cable”, then press the
ENTER
button.
Press the EXIT button to
exit.
English-25
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 26
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
Some OSD can be different depending on the model.
1
Press the MENU
button.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Auto Program”, then press
the ENTER
button.
3-1 (LN-R269D / LN-R329D)
• Air : “Air” antenna signal.
• Cable : “Cable” antenna
signal.
• Air+Cable : “Air” and
“Cable” antenna signals.
Press the UP/DOWN
buttons to select the
antenna connection, then
button.
press the ENTER
(See page 22)
3-2 (LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select the
antenna connection, then
press the ENTER
button.
(See page 22)
English-26
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 27
O P E R AT I O N
4
After all the available
channels are stored, the
“Auto Program” menu
reappears.
Press the EXIT button to
exit.
English-27
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 28
O P E R AT I O N
Adding and Erasing Channels (Manual Method)
1
Press the MENU
button.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Add/Delete”, then press the
ENTER
button.
3
Repeatedly pressing the
ENTER
button will
alternate between add
channel and delete channel.
Press the CH
or CH
buttons to switch to the
appropriate channel, then
repeat above.
Press the EXIT button to
exit.
English-28
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 29
O P E R AT I O N
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes:
TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote
control allows you to switch between these modes, and control whichever piece of
equipment you choose.
Note
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and
Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1 Turn off your VCR.
2 Press the MODE button and make sure that the VCR
appears on the LCD screen.
3 Press the SET button on your TV’s remote control.
4 Using the number buttons on your remote control, enter
three digits of the VCR code listed on page 32 of this
manual for your brand of VCR. Make sure you enter three
digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5 Press the POWER
button on the remote control. Your VCR
should turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps
2, 3 and 4, but try one of the other codes listed for your
brand of VCR. If no other codes are listed, try each VCR
code, 000 through 072.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
English-29
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 30
O P E R AT I O N
Setting Up the Remote to Operate Your Cable Box
1 Turn off your cable box.
2 Press the MODE button and make sure that the CATV
appears on the LCD screen.
3 Press the SET button on your TV’s remote control.
4 Using the number buttons on your remote control, enter three
digits of the cable box code listed on page 32 of this manual
for your brand of cable box. Make sure you enter three digits
of the code, even if the first digit is a “0”.
If there is more than one code listed, try the first one.
5 Press the Power button on the remote control. Your cable box
should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps
2, 3 and 4, but try one of the other codes listed for your brand
of cable box. If no other codes are listed, try each code, 000
through 045.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CATV” mode, the volume buttons still control your TV’s volume.
English-30
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 31
O P E R AT I O N
Setting Up the Remote to Operate Your DVD
.
1Turn off your DVD.
2 Press the MODE button and make sure that the DVD
appears on the LCD screen.
3 Press the SET button on your TV’s remote control.
4Using the number buttons on your remote control, enter three
digits of the DVD code listed on page 32 of this manual for
your brand of DVD. Make sure you enter three digits of the
code, even if the first digit is a “0”.
If there is more than one code listed, try the first one.
5 Press the Power button on the remote control. Your DVD
should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and
4, but try one of the other codes listed for your brand of DVD.
If no other codes are listed, try each code, 000 through 009.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
English-31
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 32
O P E R AT I O N
Remote Control Codes
VCR
Brand
Code
Aiwa
025
Curtis Mathes
002 017 007 008 021 025 056 064 066
Funai
025
GE
017 002 021 005 056
Hitachi
019 025 041 042
JC Penny
002 007 018 019 021 026 037 041 054 056
Kenwood
007 008 018 026 037
Magnavox
021 036 056 059
Marantz
008 007 018 021 026 036 037 062
NEC
018 007 026 037 008 062 064
Panasonic
021 056 071 072
Philco
021 036 056 059
Philips
021 036
Pioneer
019 026 036 053
RCA
017 019 002 021 035 041 043 057 068
Samsung
000
Sanyo
018 024
Sears
018 019 006 024 028 029 041 048 051
Sharp
020 034 045 015
Sony
027 033 044
Sylvania
021 025 036 056 059
Toshiba
003 019 029 051 052
Cable Box
Brand
Code
Hitachi
025 030
Panasonic
003 022 027 037 044
Philips
019 021 023 028
Pioneer
018 020 004 044
RCA
014 022 040
Samsung
000
Zenith
017 029 035 037 045
DVD
Brand
Code
Curtis Mathes
009
JVC
002
LG
006
Samsung
000 001
Sony
007
Panasonic
005
ProScan, RCA
003
English-32
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 33
O P E R AT I O N
To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
Some OSD can be different depending on the model.
1
Press the MENU
button
to display the on-screen
menu.
Press the ENTER
button
to select “Input”.
(LN-R269D)
2-1 (LN-R269D)
• When you connect
equipment to the LCD,
you can choose between
the following sets of jacks:
TV, AV, S-Video,
Component 1, Component 2,
PC, or HDMI
on the TV’s rear panel.
Press the ENTER
button
to select “Source List”.
Press the UP/DOWN
buttons to select signal
source, then press the
ENTER
button.
Press the EXIT button to
exit.
• HDMI input can only be
selected when the external
device is turned on and
connected via HDMI.
2-2 (LN-R329D / LN-R409D / LN-R469D)
Press the ENTER
button
to select “Source List”.
Press the UP/DOWN
buttons to select signal
source, then press the
ENTER
button.
Press the EXIT button to
exit.
(LN-R329D/LN-R409D/LN-R469D)
• When you connect
equipment to the LCD,
you can choose between
the following sets of jacks:
TV, AV1, AV2, S-Video1,
S-Video2, Component 1,
Component 2, PC, or HDMI
on the TV’s rear panel.
• HDMI input can only be
selected when the external
device is turned on and
connected via HDMI.
• For 32”, 40” and 46”,
AV2/S-Video2 is placed on
the side of the TV.
English-33
01 BN68-00910A-03Eng.qxd
10/20/05 3:29 PM
Page 34
Alternate method:
Press the SOURCE button on the remote control to view an
external signal source.
Note
You can choose only those external devices that are connected to the TV.
English-34
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 35
O P E R AT I O N
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
Some OSD can be different depending on the model.
1
Press the MENU
button
to display the on-screen
menu.
Press the ENTER
to select “Input”.
button
Press the UP/DOWN
buttons to select “Edit
Name”, then pressthe
ENTER
button.
2-1 (LN-R269D)
Press the UP/DOWN
buttons to select “AV”,
“S-Video”, “Component1”,
“Component2”, “PC”, or
“HDMI” input jack, then
press the ENTER
button.
2-2 (LN-R329D / LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select
“AV1”, “AV2”, “S-Video1”,
“S-Video2”, “Component1”,
“Component2”, “PC”, or
“HDMI” input jack, then
press the ENTER
button.
English-35
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 36
3-1 (LN-R269D)
Press the UP/DOWN
buttons to select “VCR”,
“DVD”, “D-VHS”, “Cable
STB”, “HD STB”, “Satellite
STB”, “PVR STB”, “AV
Receiver”, “DVD Receiver”,
“GAME”, “Camcorder” ,
“DVD Combo”, “PC”, “VOD
STB”, or “TV” input source,
then press the ENTER
button.
Press the EXIT button to
exit.
3-2 (LN-R329D / LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “VCR”,
“DVD”, “D-VHS”, “Cable
STB”, “HD STB”, “Satellite
STB”, “PVR STB”, “AV
Receiver”, “DVD Receiver”,
“GAME”, “Camcorder” ,
“DVD Combo”, “PC”, “VOD
STB”, or “TV” input source,
then press the ENTER
button.
Press the EXIT button to
exit.
English-36
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 37
Chapter 4
PICTURE CONTROL
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and
“Custom”) that are preset at the factory. You can activate either Dynamic, Standard,
Movie, or Custom by making a selection from the menu.
Or, you can select “Custom” which automatically recalls your personalized picture settings.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
In case of the PC mode,
Tint, Sharpness and Color
are not available.
2
Press the ENTER
button.
Press the ENTER
button.
Press the UP/DOWN
buttons to select the
“Dynamic”, “Standard”,
“Movie”, or “Custom”
picture setting.
Press the ENTER
•
•
•
•
button.
Choose Dynamic to increase the clarity and sharpness of the
picture.
Choose Standard for the standard factory settings.
Choose Movie when watching movies.
Choose Custom if you want to adjust the settings according to
personal preference.
Note
• Each adjusted value of Picture mode will be stored separately according to
its input mode.
English-37
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 38
PICTURE CONTROL
3
Press the UP/DOWN
buttons to select “Contrast”,
“Brightness”, “Sharpness”,
“Color”, or “Tint”, then press
the ENTER
button.
The Tint can be adjusted in any
mode other than PC mode.
4
Press the LEFT/RIGHT
buttons to decrease or
increase the value of a
particular item.
For example, if you select
“Contrast”, pressing the
RIGHT button increases it.
Press the ENTER
button.
Press the EXIT button to
exit.
• “Tint” doesn’t operate in HDMI or any Component modes.
• The Tint cannot be adjusted while watching Digital TV.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Color, Tint, OSD color will also
be adjusted accordingly.
English-38
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 39
PICTURE CONTROL
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the ENTER
button.
3
Press the UP/DOWN
buttons to select “Color
Tone”, then press the
ENTER
button.
4
Choose from the following
Color Tone settings:
“Cool 2”, “Cool 1”,
“Normal”, “Warm 1”,
“Warm 2” according to
personal preference.
Press the UP/DOWN
buttons to select “Cool2”,
“Cool1”, “Normal”, “Warm1”,
or “Warm2”.
button.
Press the ENTER
Press the EXIT button to
exit.
Resetting the Picture Settings to the Factory Defaults
Press the ENTER
button
again to select “Mode”.
Press the UP/DOWN
buttons to select “Reset”,
then press the ENTER
button.
English-39
Each mode can be reset.
01 BN68-00910A-03Eng.qxd
10/20/05 8:13 PM
Page 40
PICTURE CONTROL
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with contrast,
white enhancement and 3D noise reduction.
You can see how DNIe improves the picture by setting DNIe demo mode to On.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work when
Source is in PC mode.
2
Press the UP/DOWN
buttons to select “DNIe
Demo”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to select “Off” or
“On”, then press the
ENTER
button.
Press the EXIT button
to exit.
Alternate method :
Press the DNIe button under the remote’s cover to change the DNIe
Demo mode.
•
•
•
•
DNIe Demo: Off
DNIe Demo mode is deactivated.
DNIe Demo: On
The right-hand side of the screen shows the improved DNIe image.
The left-hand side of the screen shows the original image.
The “DNIe Demo” is designed to show the difference between the regular and DNIe pictures.
By default, the product displays the picture with DNIe applied.
English-40
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 41
PICTURE CONTROL
Changing the Screen Size
Screen size selection depends on the type of video input.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Size”,
then press the ENTER
button.
3
Press the LEFT/RIGHT
buttons to select the screen
format you want.
Press the ENTER
button.
Press the EXIT button
to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Panorama : Use this mode for the wide aspect ratio of a panoramic picture.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 : Expands the Zoom1 format picture.
• 4:3 : Sets the picture to 4:3 normal mode.
English-41
01 BN68-00910A-03Eng.qxd
10/20/05 3:30 PM
Page 42
PICTURE CONTROL
When you press the P.SIZE button under the cover of the remote control, the TV’s screen
mode should appear in sequence. The screen displays in this order: 16:9, Panorama, Zoom1,
Zoom2, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be
burned onto the screen. View the TV in 16:9 or Panorama mode as much as possible.
• HD (High Definition)
16:9 - 1080i (1920x1080)
720P (1280x720)
16:9
Panorama
Sets the picture to 16:9 wide mode.
Converts regular 4:3 aspect ratio
screen to wide screen.
Zoom1
Zoom2
The screen size when Wide screen
is vertically enlarged.
The screen size when the Zoom1
screen is vertically enlarged.
4:3
Sets the picture to 4:3 normal mode.
Note
• In TV, VIDEO, S-VIDEO,and all COMPONENT (480i, 480p) modes, all screen modes can
be selected. (16:9 • Panorama • Zoom1 • Zoom2 • 4:3).
• In TV(DTV), DVI, PC, HDMI, COMPONENT (720p, 1080i) modes, only 16:9 & 4:3 modes
can be selected.
• In Zoom1, Zoom2 modes, you can move the picture on screen by pressing the UP/DOWN
buttons.
• Picture size will not change when PIP size is Double.
English-42
01 BN68-00910A-03Eng.qxd
10/20/05 8:14 PM
Page 43
PICTURE CONTROL
Freezing the Picture
1
Press the STILL button to freeze a moving picture.
• Normal sound will still be heard.
Press again to cancel.
English-43
01 BN68-00910A-03Eng.qxd
10/20/05 8:15 PM
Page 44
PICTURE CONTROL
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the
same mode. For example, you cannot watch one TV channel in the main screen, and
a different one in the PIP screen. Please see ‘PIP Settings’below for details.
You can use the PIP feature to simultaneously watch two video sources.
Note: While V-Chip is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PIP”,
then press the ENTER
button.
2
Press the ENTER
If you turn the TV off while
watching in PIP mode and turn it
on again, the PIP window will
disappear.
button.
Press the UP/DOWN
buttons to select “On”,
then press the ENTER
button.
Alternate method :
Press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
English-44
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 45
PICTURE CONTROL
O: PIP operates
X: PIP doesn’t operate
PIP Settings
Main Picture
Sub Picture
DTV
DTV
ATV
AV (1, 2)
S-Video (1, 2)
COM (1, 2)
PC
HDMI
X
X
O
O
O
X
X
ATV
X
X
X
X
X
O
O
AV (1, 2)
O
X
X
X
X
O
O
S-Video (1, 2)
O
X
X
X
X
O
O
COM (1, 2)
O
X
X
X
X
O
O
PC
X
X
X
X
X
X
X
HDMI
X
O
O
O
O
X
X
Note
• ATV : Analog TV
• DTV : Digital TV
• COM (1, 2) : Component (1, 2)
Selecting a Signal Source (External A/V) for PIP
Some OSD can be different depending on the model.
3-1 (LN-R269D)
• MAIN : TV(ATV)
PIP : HDMI
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
• The sub picture can serve
different source selections
based on what the main
picture is set to.
Select the source of the sub
picture (PIP) by pressing the
UP/DOWN
buttons
and press the ENTER
button.
In the PIP Source selection
menu, ‘TV’ represents both
analog and digital tuning.
3-2 (LN-R329D / LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “Source”,
then press the ENTER
button.
Select the source of the sub
picture (PIP) by pressing the
UP/DOWN
buttons
and press the ENTER
button.
English-45
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 46
PICTURE CONTROL
Swapping the Contents of the PIP and Main image
4
Press the UP/DOWN
buttons to select “Swap”,
then press the ENTER
button.
Changing the PIP Channel
5
• MAIN : AV(1, 2), S-Video(1, 2),
COM(1, 2)
PIP : TV(DTV)
Press the UP/DOWN
buttons to select
“PIP Channel”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select the desired
channel in the PIP window.
Press the ENTER
• MAIN : PC, HDMI
PIP : TV(ATV)
• The channel can be active when the
sub picture is set to TV.
buttons.
Alternate method :
Press the PIP Channel buttons under the remote’s cover.
English-46
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 47
PICTURE CONTROL
Changing the Position of the PIP Window
6
Press the UP/DOWN
buttons to select “Position”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
PIP window position.
Press the ENTER
• The Double (
buttons.
) mode cannot be selected in position.
Changing the Size of the PIP Window
If main picture is in PC mode,
Size is not available.
7
Press the UP/DOWN
buttons to select “Size”, then
press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
size of the PIP window.
Press the ENTER
button.
Press the EXIT button to exit.
• When the PC is in energy saving mode, you cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when you use the main
screen to view a game or karaoke.
• You can adjust picture position only by using the
size menu.
English-47
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 48
PICTURE CONTROL
My Color Control
My Color Control allows users to adjust colors to their preference by adjusting
Pink, Blue and Green using the predefined settings (Red, Green, Blue, Yellow,
Pink, White, Standard, and Custom) without affecting other colors on the screen.
Easy Control
You can also directly access "My
Color Control" by pressing and
holding the ENTER button for
three seconds with no menu on the
screen.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “My Color
Control”, then press the
ENTER
button.
2
This function doesn’t work
when Source is in PC mode.
Press the UP/DOWN
buttons to select “Easy
Control”, then press the
ENTER
button.
This captures the current screen in
a still image to adjust the color.
3
Press the LEFT/RIGHT
buttons to select the desired
My Color Control color, then
press the ENTER
button.
The Original picture (before
adjustment) is shown on the
left side, while the selected
mode is shown on the
right side.
* The sources are displayed in the following order:
Red-Green-Blue-Yellow-Pink-White-Standard-Custom
English-48
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 49
PICTURE CONTROL
Detail Control
1
You can adjust Red, Green,
Press the MENU
button
to display the menu.
Blue, Yellow, Pink and
White without using the
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
predefined settings in custom
mode.
Press the UP/DOWN
buttons to select “My Color
Control”, then press the
ENTER
button.
2
This function doesn’t work
when the Source is in PC mode.
Press the UP/DOWN
buttons to select “Detail
Control”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to select the desired
My Color Control color and
press the ENTER
button.
(To reset the “Detail Control”,
select “Reset” by pressing
the UP/DOWN
buttons
and then press the
ENTER
button.)
Press the LEFT/RIGHT
buttons to increase or
decrease the value of a
particular item.
Press the ENTER
button .
Press the EXIT button
to exit.
* The sources are displayed in the following order:
Red-Green-Blue-Yellow-Pink-White-Reset
English-49
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 50
PICTURE CONTROL
Dynamic Contrast
Dynamic Contrast detects the visual signal input and adjusts to
create optimum contrast.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work
when the Source is in PC mode,
or PIP is set to on.
2
Press the
UP/DOWN
buttons
to select “Dynamic
Contrast”, then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
to select “On”, then press
the ENTER
button.
Press the EXIT button
to exit.
English-50
01 BN68-00910A-03Eng.qxd
10/20/05 3:31 PM
Page 51
PICTURE CONTROL
Brightness Sensor
The Brightness Sensor adjusts the screen brightness automatically by using a light
detecting sensor.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
This function doesn’t work
when the Source is in PC mode.
2
Press the UP/DOWN
buttons to select “Brightness
Sensor”,
then press the ENTER
button.
Screen brightness is
adjusted automatically depending
on the brightness of the
surrounding environment.
3
Press the LEFT/RIGHT
buttons to select “On”,
then press the ENTER
button.
You can also directly access
"Brightness Sensor" by pressing
and holding the EXIT button for
three seconds with no Menu on the
screen.
Press the EXIT button
to exit.
English-51
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 52
Chapter 5
SOUND CONTROL
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See the next page.)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Equalizer”, then press the
ENTER
button.
3
Press the LEFT/RIGHT
buttons to select a particular
frequency to adjust.
Press the UP/DOWN
buttons to increase or
decrease the level of the
particular frequency.
Press the ENTER
button.
Press the EXIT button
to exit.
• L/R Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
• Bandwidth Adjustment (100, 300, 1K, 3K, 10K)
To adjust the level of different bandwidth frequencies.
English-52
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 53
SOUND CONTROL
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and
“Custom”) that are preset at the factory. Or, you can select “Custom”, which
automatically recalls your personalized sound settings.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the ENTER
to select “Mode”.
button
Press the UP/DOWN
buttons to select “Standard”,
“Music”, “Movie”, “Speech”,
or “Custom” sound
setting, then press the
ENTER
button.
Press the EXIT button
to exit.
• Choose Standard for the standard factory settings.
• Choose Music when watching music videos or concerts.
• Choose Movie when watching movies.
• Choose Speech when watching a show that is mostly dialog (i.e., news).
• Choose Custom to recall your personalized settings
(see “Customizing the Sound”, page 52).
English-53
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 54
SOUND CONTROL
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers. Trusurround delivers a compelling, virtual
surround sound experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all multichannel formats.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “SRS
TruSurround XT”, then
press the ENTER
button.
3
Press the UP/DOWN
buttons to select “Off”,
“3D Mono”, “Stereo”,
then press the ENTER
button.
Press the EXIT button
to exit.
TRADEMARK & LABEL LICENSE NOTICE
TruSurround XT, SRS and
Symbol are
trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
English-54
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 55
SOUND CONTROL
Choosing a Multi-Channel
Sound (MTS) track - Digital
The digital-TV transmission system is capable of simultaneous transmission of many
audio tracks (for example, simultaneous translations of the program into foreign
languages).
The availability of these additional “multitracks” depends upon the program.
Preferred Language
1
Quick way to access the MTS
menu: Just press the “MTS” button
on the remote control.
You can listen in a language other
than your chosen language by
pressing the MTS button.
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Multi-Track Options”, then
press the ENTER
button.
3
Press the ENTER
button
to select “Preferred
Language”. Press the
UP/DOWN
buttons to
choose the language
(English, Spanish or French)
you want, then press the
ENTER
button.
Press the EXIT button
to exit.
English-55
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 56
SOUND CONTROL
Multi-Track Sound
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Multi-Track Options”, then
press the ENTER
button.
3
Press the UP/DOWN
buttons to select
“Multi-Track Sound”, then
button.
press the ENTER
Press the UP/DOWN
buttons to select a setting
you want, then press the
ENTER
button.
Press the EXIT button
to exit.
• Choose Mono for channels that are broadcasting in mono, or if you are having
difficulty receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
English-56
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 57
SOUND CONTROL
Automatic Volume Control
Reduces the differences in volume level among broadcasters.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Auto
Volume”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to set Auto Volume
“On” then press the
ENTER
button.
Press the EXIT button
to exit.
English-57
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 58
SOUND CONTROL
Selecting the Internal Mute
Sound output from the TV speakers is muted.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Internal
Mute”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “On”, then
button.
press the ENTER
Press the EXIT button
to exit.
English-58
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 59
SOUND CONTROL
Choosing a Digital Sound Format
Digital sound can be output from the rear panel connector on your TV. The digital
sound output is a connector labeled “Optical”. After connecting a digital-audio
component, you must specify the transmission format (Dolby or PCM, as appropriate
to your digital audio component).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Digital
Output”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “Dolby
Digital” or “PCM”, then
press the ENTER
button.
Press the EXIT button
to exit.
• PCM (Pulse Coded Modulation): this is for use with 2 channel AVamplifiers that do not
support Dolby digital.
DOLBY DIGITAL
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
English-59
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 60
SOUND CONTROL
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Melody”,
then press the ENTER
button. Press the
UP/DOWN
buttons to
select “On” or “Off”, then
press the ENTER
button.
Press the EXIT button
to exit.
English-60
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 61
Chapter 6
CHANNEL CONTROL
Selecting the Antenna
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the ENTER
button
to select “Antenna”.
Press the UP/DOWN
buttons to select “Air” or
“Cable”, then press the
ENTER
button.
Press the EXIT button
to exit.
Note
• If the antenna is connected to ANT 1 IN (CABLE),
select “CABLE” and if it is connected to
ANT 2 IN (AIR), select “AIR”.
• If both ANT 1 IN (CABLE) and ANT 2 IN (AIR)
are connected, select the antenna input you want.
If the antenna input is not selected properly,
noise may appear on the screen.
English-61
or
01 BN68-00910A-03Eng.qxd
10/20/05 8:16 PM
Page 62
CHANNEL CONTROL
To Set-up Your Favorite Channels
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Favorite
Channels”, then press the
ENTER
button.
Only memorized channels can
be set as favorite channels.
2
Press the UP/DOWN
buttons to select your
favorite channels to watch
among the labeled channels.
Press the UP/DOWN
buttons to select a channel
as a favorite channel, then
press the ENTER
button.
Select All : Press to select all
channels.
Clear All : Press to clear all
channels.
Press the ENTER
button
again to deselect the
selected channel.
Press the EXIT button to
exit.
3
To select the favorite channels you have set up, press the FAV.CH
button on the remote.
English-62
01 BN68-00910A-03Eng.qxd
10/20/05 3:32 PM
Page 63
CHANNEL CONTROL
Labeling Channels
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Name”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select the
channel to be assigned to
a new name, then press the
ENTER
button.
Press the UP/DOWN
buttons to select a letter,
a number or a blank
(Results in this sequence:
A...Z, 0...9, +, -, •, /, blank).
button
Press the RIGHT
to switch to the next field,
which will be selected.
Select a second letter or
digit by pressing the
UP/DOWN
buttons,
as above. Repeat the
process to select the last
three digits. When you have
finished, press the
ENTER
button to assign
the new name.
To erase the assigned new
name, select "Clear" by
pressing the
or
button,
then press the ENTER
button.
Press the EXIT button to
exit.
• The names of digital broadcasting channels are automatically assigned and thus cannot be
assigned by users.
• When you use cable card to watch cable broadcasting, it might take some time for a
channel name to be displayed due to data-receiving time.
English-63
01 BN68-00910A-03Eng.qxd
10/20/05 8:18 PM
Page 64
CHANNEL CONTROL
Viewing the Channel Lists
You can display a list of all channels or your favorite channels.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Channel
List”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “All” or
“Favorite”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to select “Channel”
and ENTER
button.
To toggle between your
favorite channels or all
channels, use the yellow
button on the remote
control.
• Red button : Press to display the previous channel list page.
Green button : Press to display the next channel list page.
Yellow button : Press to toggle between your favorite channels or
all channels.
Blue or EXIT button : Press to exit.
English-64
01 BN68-00910A-03Eng.qxd
10/20/05 8:18 PM
Page 65
CHANNEL CONTROL
Editing the Channel Lists
You can edit channels to be added or deleted.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Channel
List”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select “Edit”, then
press the ENTER
button.
3
Press the UP/DOWN
buttons to select “Channel”
and ENTER
button.
Then, the channel can be
deleted or added. If deleted,
the channel number will be
dimmed.
To make the deleted
channels be back on the
list, press the ENTER
button.
• Enter button : Press to add or delete the channel.
• Red button : Press to display the previous channel list page.
• Green button : Press to display the next channel list page.
• Yellow button : Press to add all channels deleted.
• Blue button : Press to delete all channels memorized.
• EXIT button : Press to exit.
English-65
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 66
CHANNEL CONTROL
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
• Only analog TV channels
can be fine tuned.
• “*” will appear next to the
name of fine-tuned
channels.
2
Press the UP/DOWN
buttons to select “Fine
Tune”, then press the
ENTER
button.
3
If you do not store the fine-tuned
channel in memory, adjustments
are not saved.
Press the LEFT/RIGHT
buttons to adjust the fine
tuning.
4
Fine tuned channels that have
been saved are marked with an
asterisk “*” on the right-hand
side of the channel number in the
channel banner.
To store the fine tuning
setting in the TV’s memory,
press the ENTER
button.
To reset the fine tuning
setting, press the DOWN
button to select “Reset”,
then press the ENTER
button.
Press the EXIT button
to exit.
English-66
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 67
CHANNEL CONTROL
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear,
digital (HDTV) channels have either perfect reception quality or you will not receive
them at all. So, unlike analog channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital
channels.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Signal
Strength”, then press the
ENTER
button.
If the signal strength meter
indicates that the signal
is weak, physically adjust
your antenna to increase
the signal strength.
Continue to adjust the
antenna until you find the
best position with the
strongest signal.
Press the EXIT button
to exit.
English-67
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 68
CHANNEL CONTROL
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
• LNA functions only when
antenna is set to AIR and
the settings will be stored
separately in each channel.
(See “Selecting the
antenna.” on page 61.)
• For 26” and 32”, LNA
functions may operate when
antenna is set to Cable.
2
Press the UP/DOWN
buttons to select “LNA”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
Press the EXIT button
to exit.
English-68
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 69
Chapter 7
PC D I S P L AY
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. However, even if your actual screens look different, the same basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Control Panel” on the Windows start
menu.
2
When the control panel window appears,
click on “Appearance and Themes” and
a display dialog-box will appear.
3
4
When the control panel window appears,
click on “Display” and a display
dialog-box will appear.
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1360 x 768 pixels
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
* See “Display Modes” on page 128.
English-69
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 70
PC D I S P L AY
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals
the monitor receives. The function also automatically fine-tunes the settings and adjusts
the frequency values and positions.
Note: This function does not work in DVI-Digital mode.
Some OSD can be different depending on the model.
Change to the PC mode first.
1-1 (LN-R269D/ LN-R329D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
1-2 (LN-R409D / LN-R469D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
button.
press the ENTER
2
Press the UP/DOWN
buttons to select
“Auto Adjustment”,
then press the ENTER
button.
English-70
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 71
PC D I S P L AY
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Some OSD can be different depending on the model.
Change to the PC mode first.
1-1 (LN-R269D/ LN-R329D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
1-2 (LN-R409D / LN-R469D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
2
Press the ENTER
button to select
“Image Lock”.
English-71
01 BN68-00910A-03Eng.qxd
10/20/05 3:33 PM
Page 72
3
Press the UP/DOWN
buttons to select
“Coarse” or “Fine”,
then press the
ENTER
button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality. Vertical
stripes may appear or
the picture may be blurry.
Press the ENTER
<Adjusting Coarse>
button.
Press the EXIT button to
exit.
<Adjusting Fine>
English-72
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 73
PC D I S P L AY
Changing the Screen Position
Some OSD can be different depending on the model.
Change to the PC mode first.
1-1 (LN-R269D/ LN-R329D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
1-2 (LN-R409D / LN-R469D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Position”, then press
the ENTER
button.
English-73
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 74
3
Press the UP/DOWN
buttons to adjust the
V-Position.
Press the
LEFT/RIGHT
buttons to adjust
the H-Position.
Press the ENTER
button.
Press the EXIT button
to exit.
English-74
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 75
PC D I S P L AY
Initializing the Screen Position or Color Settings
Some OSD can be different depending on the model.
Change to the PC mode first.
1-1 (LN-R269D/ LN-R329D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
1-2 (LN-R409D / LN-R469D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “PC”, then
press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Image Reset”, then press
the ENTER
button.
Press the EXIT button
to exit.
English-75
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 76
Chapter 8
TIME SETTING
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“Time”, then press
the ENTER
button.
2
Press the ENTER
button to select “Clock”.
3
Press the ENTER
button to select “Clock
Mode”.
Press the UP/DOWN
buttons to select “Manual”,
then press the ENTER
button.
English-76
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 77
TIME SETTING
4
Press the UP/DOWN
buttons to select “Clock
Set”, then press the
ENTER
button.
• The current time will appear
every time you press the
INFO button.
• You can set the month, day,
year, hour, and minute
directly by pressing the
number buttons on the
remote control.
5
Press the LEFT/RIGHT
buttons to move to “Month”,
“Day”, “Year”, “Hour”,
“Minute”, or “am/pm”.
Set the date and time you
want by pressing the
UP/DOWN
buttons,
then press the ENTER
button.
Press the EXIT button to
exit.
English-77
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 78
TIME SETTING
Option 2: Setting the Clock Automatically
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“Time”, then press
the ENTER
button.
2
Press the ENTER
button to select “Clock”.
3
Press the ENTER
button to select “Clock
Mode”.
Press the UP/DOWN
buttons to select “Auto”,
then press the ENTER
button.
English-78
01 BN68-00910A-03Eng.qxd
10/20/05 3:34 PM
Page 79
TIME SETTING
4
Press the UP/DOWN
buttons to select “Time
Zone”, then press the
ENTER
button.
5
Press the UP/DOWN
buttons to highlight the
time zone for your local
area (and to move the
highlight to the appropriate
time zone on the map of
the United States), then
press the ENTER
button.
Depending on the broadcast
station and signal, the auto
time may not be set correctly.
If this occurs, set the time
manually.
6
Press the UP/DOWN
buttons to select “DST”
(Daylight Saving Time),
then press the ENTER
button.
Antenna or cable must be
connected in order to set the
time automatically.
Press the UP/DOWN
buttons to select “Yes” or
“No”, then press the
ENTER
button.
Press the EXIT button to
exit.
English-79
01 BN68-00910A-03Eng.qxd
10/20/05 3:35 PM
Page 80
TIME SETTING
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1
Quick way to access the sleep
timer setting: Simply press
the “SLEEP” button under the
cover of the remote control.
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“Time”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select
“Sleep Timer”, then press
the ENTER
button.
3
Press the UP/DOWN
buttons to adjust “Minute”.
4
Press the RIGHT
button to select “Activation”.
Press the UP/DOWN
buttons to select “Yes”, then
press the ENTER
button.
Press the EXIT button to
exit.
English-80
01 BN68-00910A-03Eng.qxd
10/20/05 3:35 PM
Page 81
TIME SETTING
Setting the On/Off Timer
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“Time”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select
“On Timer”, then press the
ENTER
button.
3
When finished, press the
MENU button to return.
• The current time will
appear every time you
press the INFO button.
Press the UP/DOWN
buttons to adjust “Hour”,
then press the RIGHT
button to move to the next
step.
• You can set the hour,
minute, channel, and
volume directly by
pressing the number
buttons on the remote
control.
Set other items using the
same method as above.
4
Press the UP/DOWN
buttons to select
“Off Timer”, then press the
ENTER
button.
5
Press the UP/DOWN
buttons to adjust “Hour”,
then press the RIGHT
button to move to the next
step.
Set other items using the
same method as above.
Press the EXIT button to
exit.
English-81
01 BN68-00910A-03Eng.qxd
10/20/05 3:35 PM
Page 82
Chapter 9
FUNCTION DESCRIPTION
Selecting a Menu Language
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select
“Language”, then press
the ENTER
button.
2
Press the UP/DOWN
buttons to select the
appropriate language:
“English”, “Spanish” or
“French”.
Press the ENTER
button.
Press the EXIT button to
exit.
English-82
02 BN68-00910A-03Eng.qxd
10/20/05 3:36 PM
Page 83
FUNCTION DESCRIPTION
Selecting the Film Mode
On: Automatically senses and processes film signals from all sources and adjusts
the picture for optimum quality.
Off: Switches off the Film mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Film Mode”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
Press the EXIT button
to exit.
Note
• Film mode is supported in TV, VIDEO, S-VIDEO, and
COMPONENT 480i
English-83
02 BN68-00910A-03Eng.qxd
10/20/05 3:36 PM
Page 84
FUNCTION DESCRIPTION
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear on
the screen.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Picture”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Digital NR”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
Press the EXIT button
to exit.
English-84
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 85
FUNCTION DESCRIPTION
Using the Color Weakness
Enhancement Option
This option adjusts the Red, Blue or Green color to enhance the image according to
the user's particular color weakness.
Some OSD can be different depending on the model.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2-1
(LN-R269D / LN-R329D)
Press the UP/DOWN
buttons to select “Color
Weakness”, then press the
ENTER
button.
2-2 (LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “Color
Weakness”, then press the
ENTER
button.
English-85
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 86
FUNCTION DESCRIPTION
3
Press the ENTER
button.
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
You will also see the items
“Red”, “Green” and “Blue”.
4
Press the UP/DOWN
buttons to select the item
you wish to change, then
press the ENTER
button.
Press the LEFT/RIGHT
buttons to change the value
of the item, then press the
ENTER
button.
Press the EXIT button
to exit.
English-86
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 87
FUNCTION DESCRIPTION
Viewing Closed Captions
(On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog RF channel mode or external signal mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Caption”,
then press the ENTER
button.
3
Press the ENTER
to select “Caption”.
button
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
English-87
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 88
FUNCTION DESCRIPTION
4
Press the UP/DOWN
buttons to select “Caption
Mode”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select submenu
(Default, CC1~CC4 or
Text1~Text4)
you want, the press the
ENTER
button.
Press the EXIT button
to exit.
• The default is “CC1”.
CC1 : The Primary Synchronous Caption Service.
These are captions in the primary language that must be
in sync with the sound, preferably matched to a specific frame.
CC2 : The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment
information carried in the program.
CC3 : Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second
language captions.
CC4 : Special Non-Synchronous Use Captions.
Similar to CC2.
Text1: First Text Service. This may be various non-program related data.
Text2: Second Text Service. Additional data, usually not program related.
Text3/Text4: Third and Fourth Text Services. These data channels should be
used only if Text1 and Text2 are not sufficient.
Note
• The Caption feature doesn’t work in COMPONENT(480p, 720p,
1080i), HDMI modes.
• The availability of captions depends on the program being
broadcast.
English-88
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 89
FUNCTION DESCRIPTION
Viewing Closed Captions
(On-Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Caption”,
then press the ENTER
button.
3
Press the ENTER
to select “Caption”.
button
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
English-89
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 90
FUNCTION DESCRIPTION
4
Press the UP/DOWN
buttons to select “Caption
Mode”, then press the
ENTER
button.
Press the UP/DOWN
buttons to select submenu
(Default, Service1~Service6,
CC1~CC4, or Text1~Text4)
you want, the press the
ENTER
button.
• “Caption Options” are
available only when
“Service1~Service6”
can be selected in
“Caption Mode”.
5
Press the UP/DOWN
buttons to select “Caption
Options”, then press the
ENTER
button.
• SERVICE1~6 in digital
caption mode may not
be available depending
on the broadcast.
6
Press the UP/DOWN
buttons to select “Size”,
then press the ENTER
button.
• The availability of cap
tions depends on the
program being
broadcast.
• “Default” means to
follow the standard
set by the broadcaster.
Press the UP/DOWN
buttons to select the desired
Caption option, then press
the ENTER
button.
Press the Up or Down
button to select the desired
sub-menu options(see
options below), then press
ENTER
.
Press the EXIT button
to exit.
English-90
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 91
FUNCTION DESCRIPTION
• Size
This option consists of “Default”, “Small”, “Standard”, and “Large”. The default is “Standard”.
• Font Style
This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want.
The default is “Style 0”.
• Foreground Color
This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”,
“Magenta”, and “Cyan”. You can change the color of the letter. The default is “White”.
• Background Color
This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”,
“Magenta”, and “Cyan”. You can change the background color of the caption.
The default is “Black”.
• Foreground Opacity
This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”.
You can change the opacity of the letter.
• Background Opacity
This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”.
You can change the background opacity of the caption.
• Return to Default
This option sets each of “Size”, “Font Style”, “Foreground Color”, “Bakcground color”,
“Foreground Opacity”, and “Background Opacity” to its default.
Alternate method:
Press the CAPTION button under the remote’s
cover repeatedly to select “On” or “Off”.
English-91
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 92
FUNCTION DESCRIPTION
Menu Transparency Level
Adjusts the transparency of the menu screen.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Menu
Transparency”, then press
the ENTER
button.
Press the UP/DOWN
buttons to select level, then
press the ENTER
button.
Press the EXIT button
to exit.
English-92
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 93
FUNCTION DESCRIPTION
Setting the Function Help
Displays help on the menu functions.
Some OSD can be different depending on the model.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2-1 (LN-R269D / LN-R329D)
Press the UP/DOWN
buttons to select “Function
Help”, then press the
ENTER
button.
2-2 (LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “Function
Help”, then press the
ENTER
button.
English-93
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 94
3-1 (LN-R269D / LN-R329D)
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
Press the EXIT button to
exit
3-2
(LN-R409D / LN-R469D)
Press the UP/DOWN
buttons to select “On”, then
press the ENTER
button.
Press the EXIT button to
exit
English-94
02 BN68-00910A-03Eng.qxd
10/20/05 3:37 PM
Page 95
FUNCTION DESCRIPTION
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate
for children. The user must enter a PIN (personal ID number) before any of the
V-Chip restrictions are set up or changed.
Notes : • When the V-chip feature is activated, the PIP features do not function.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “V-Chip”,
then press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
• The default PIN number of
a new TV set is
“0-0-0-0”.
3
If you forget the PIN,
press the remote-control
buttons in the following
sequence, which resets
the pin to 0-0-0-0 :
Power Off.
→ Mute → 8 → 2 → 4
→ Power On.
The “V-Chip” screen will
appear. Press the
UP/DOWN
buttons to
select “Change PIN”, then
press the ENTER
button.
The Change PIN screen will
appear. Choose any 4 digits
for your PIN and enter
them. As soon as the 4
digits are entered, the
“Confirm new PIN” screen
appears. Re-enter the same
4 digits. When the Confirm
screen disappears, your PIN
has been memorized.
Press the EXIT button
to exit.
English-95
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 96
FUNCTION DESCRIPTION
How to Enable/Disable the V-Chip
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “V-Chip”,
then press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
3
The “V-Chip” screen will
appear. To enable the
V-Chip feature, press the
ENTER
button so that
the “V-Chip Lock” field is
“On”. (Pressing the
UP/DOWN
buttons will
alternate between “On” and
“Off”.) Press the ENTER
button.
Press the EXIT button
to exit.
English-96
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 97
FUNCTION DESCRIPTION
How to Set up Restrictions Using the “TV Parental Guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two
methods: The TV guidelines or the MPAA rating.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “V-Chip”,
then press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
3
The “V-Chip” screen will
appear. Press the
UP/DOWN
buttons to
select “TV Parental
Guidelines”, then press the
ENTER
button.
4
The “TV Parental
Guidelines” screen will
appear.
Press the UP/DOWN
buttons to select one of the
six aged based categories:
TV-Y
TV-Y7
Young children
Children 7 and over
TV-G
TV-PG
TV-14
TV-MA
General audience
Parental guidance
Viewers 14 and over
Mature audience
English-97
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 98
FUNCTION DESCRIPTION
5
Allow all: Press to unlock
all TV ratings.
At this point, one of the
TV-Ratings is selected.
Press the ENTER
button. Depending on your
existing setup, a symbol will
be selected.
(Blank = Unblocked,
= Blocked)
While “ ” is selected, press
button to
the ENTER
block or unblock the
category.
Block all: Press to lock all
TV ratings.
To select a different
TV-Rating, press the
UP/DOWN
buttons and
then repeat the process.
Note 1: The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have
additional options. See the next step to change any of the following
sub-ratings:
FV: Fantasy violence
D: Sexually Suggestive Dialog
L: Adult Language
S: Sexual situation
V: Violence
Note 2: The V-Chip will automatically block certain categories that are
“more restrictive”. For example, if you block “TV-Y” category, then
TV-Y7 will automatically be blocked. Similarly, if you block the TV-G
category, then all the categories in the “young adult” group will be
blocked (TV-Y, TV-Y7, TV-G, TV-PG, TV-14, and TV-MA). The sub-rat
ings (D, L, S, V) work together similarly. (See next section.)
6
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG,
TV-14, or TV-MA (See Step 4, on previous page), and press
the RIGHT
button. A symbol “ ” will be displayed for each
sub-rating.
While “ ” is selected, press the ENTER
button to go to a sub
rating. Press ENTER
to block the sub rating. To select a different
TV-Rating, press the UP/DOWN
buttons and then repeat the
process.
Note: The V-chip will automatically block certain categories
that are “More restrictive” .For example, if you block “L” sub-rating in
TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will
automatically be blocked.
7
Press the MENU button to clear all the screens. (Or proceed to the
next section, and set up additional restrictions based on the MPAA
codes.)
Note
• These categories consist of two separate groups: TV-Y and TV-Y7
(young children through age 7), and TV-G through TV-MA (everybody else).
The restrictions for these two groups work independently: If a household includes
very young children as well as young adults, the TV guidelines must be set up
separately for each age group. (See next step.)
English-98
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 99
FUNCTION DESCRIPTION
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13,
R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA)
system, and its main application is for movies. When the V-Chip lock is on, the TV
will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
3
The “V-Chip” screen will
appear. Press the
UP/DOWN
buttons to
select “MPAA Rating”, then
press the ENTER
button.
English-99
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 100
FUNCTION DESCRIPTION
Allow all: Press to unlock
all TV ratings.
4
The “MPAA Rating” screen
will appear. Repeatedly
press the UP/DOWN
buttons to select a particular
MPAA category. Pressing
buttons
the UP/DOWN
will cycle through the MPAA
categories:
Block all: Press to lock all
TV ratings.
G
General audience (no restrictions).
PG
Parental guidance suggested.
PG-13
PG-13 (Parents strongly cautioned).
R
R (Restricted. Children under 17 should be accompanied by an adult).
NC-17
No children under age 17.
X
X (Adults only).
NR
Not rated.
While a particular category is selected, press the ENTER
button to activate it.
A selected symbol “ ” will be displayed.
Press the ENTER
button to block or unblock the category.
Note: The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X”
will automatically be blocked also.
English-100
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 101
How to Set up Restrictions Using the ‘Canadian English’
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
3
Press the UP/DOWN
buttons to select “Canadian
English”, then press the
ENTER
button.
4
Allow All: Press to unlock
all TV ratings.
Block All: Press to lock
all TV ratings.
Press the UP/DOWN
buttons to select a
appropriate restriction.
Press the ENTER
button
to activate the restriction
selected. The “ “ symbol is
indicated.
Press the EXIT button.to
exit.
Canadian English
•E
: Exempt programming includes...news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
• C : Programming intended for children under age 8.
• C8+ : Programming generally considered acceptable for children 8 years and over to watch on their own.
• G : General programming, suitable for all audiences.
• PG : Parental Guidance.
• 14+ : Programming contains themes or content which may not be suitable for viewers under the age of 14.
• 18+ : Adult programming.
English-101
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 102
How to Set up Restrictions Using the ‘Canadian French’
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
The message “Enter PIN”
will appear. Enter your
4 digit PIN number.
3
Press the UP/DOWN
buttons to select “Canadian
French”, then press the
ENTER
button.
4
Allow All: Press to unlock
all TV ratings.
Block All: Press to lock all
TV ratings.
Press the UP/DOWN
buttons to select a
appropriate restriction.
Press the ENTER
button
to activate the restriction
selected. The “ “ symbol is
indicated.
Press the EXIT button.to
exit.
Canadian French
•E
: Exempt programming includes...news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
•G
: General.
• 8 ans+ : 8+ General-Not recommended for young children.
• 13 ans+ : Programming may not be suitable for children under the age of 13.
• 16 ans+ : Programming is not suitable for children under the age of 16.
• 18 ans+ : Programming restricted to adults.
English-102
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 103
FUNCTION DESCRIPTION
How to Reset the TV after the V-Chip Blocks a Channel
(“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will
go black and the following message will appear:
1
Enter your PIN number.
To resume normal viewing, tune to a different channel using CH or CH button.
Under certain conditions (depending on the rating of the local TV programs) the
V-Chip might lock out all the channels. In this case, use the V-Chip function for
an “emergency escape”:
1
Press the MENU
button. Press the UP/DOWN
button.
“Setup”, then press the ENTER
2
Press the UP/DOWN
button.
3
Enter your PIN number, press the ENTER
UP/DOWN
buttons to select
buttons to select “V-Chip”, then press the ENTER
button, and press the
buttons to temporarily disable the V-Chip Lock.
English-103
02 BN68-00910A-03Eng.qxd
10/20/05 8:19 PM
Page 104
FUNCTION DESCRIPTION
Electronic Program Guide
Your TV has an “Electronic Program Guide” to
help you navigate through all the possible
viewing options. The EPG supplies
information, such as program lists, start and end
times of all available channels.
A
In addition, detailed information about the
program is often available in the EPG.
(The availability and the amount of program
details will vary depending on the broadcaster.)
I
H
B
E
C D
F
G
Viewing the Electronic Program Guide
A
Displays which channel is currently selected to show program information in
the Channel Guide.
B
Press to view detailed information for the selected digital program.
C
Switches to the mini program guide. The mini guide shows the titles of the
available programs of one channel. Press the Red button on the remote
control. The set default guide is Mini Guide.
D
Scrolls backwards quickly (2 hours). Press the Green button on the remote control.
E
Displays titles and other details about upcoming programs of particular
channels. Highlight the program and press the INFO button to see
additional and detailed information. (The availability of additional details
depends on the broadcaster.) Use the / buttons to search information
about another channel.
F
Scrolls forward quickly (2 hours). Press the Yellow button on the remote control
and repeatedly press the ENTER button so that the appropriate time is displayed.
G
Exits from the Program Guide and returns to normal viewing mode.
Press the Blue button on the remote control.
H
Displays the program times (arranged in 1 hour time blocks).
I
Displays the current time and date.
Note
• You can use the GUIDE button on the remote control to display the Electronic Program Guide.
The EPG begins its list with the channel that is currently active.
The EPG will only work when you are receiving digital channels.
English-104
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 105
FUNCTION DESCRIPTION
Using the Electronic Program Guide
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Guide”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Default
Guide”, then press the
ENTER
button.
3
Press the UP/DOWN
buttons to select “Mini
Guide” or “Full Guide”, then
press the ENTER
button.
• Mini Guide : Displays the
guide for one channel.
• Full Guide : Displays the
guide for all channels.
Press the EXIT button
to exit.
English-105
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 106
FUNCTION DESCRIPTION
Viewing Information about a Single Channel
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Guide”,
then press the ENTER
button.
2
Press the ENTER
button to select “Mini Guide”.
Press the UP/DOWN
buttons to view information
about one channel by time.
You can switch between Full
Guide mode and Mini
Guide mode by pressing the
Red button repeatedly.
Select the program you want
by pressing the
UP/DOWN
buttons and
press the INFO button on the
remote control.
• ENTER button : Press to watch the current program or to add the
program to remind list.
• Red button : Press to switch to the program guide for all channels.
Press again to switch to the program information for
the selected channel.
• Blue button : Press to exit.
• INFO button : Press to view detailed information for the selected
digital program.
Press the EXIT button to exit.
Note
• You can also view information about a single channel by pressing the GUIDE button on the
remote control. (The EPG should be pre-set in Mini Guide mode.)
• Press the INFO button on the remote control to view the program information for the current
channel.
English-106
02 BN68-00910A-03Eng.qxd
10/20/05 8:20 PM
Page 107
FUNCTION DESCRIPTION
Viewing Information about Channels
Displays the program time and content for all channels.
This function is available only when the program is digital.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Guide”,
then press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Full Guide”, then
press the ENTER
button.
3
Press the Green button to
activate “-2 Hours” and
the Yellow button to activate
“+2 Hours”.
• INFO button : Displays detailed information for the selected digital
program.
•
button : Displays program information for each channel,
based on the time. Select your desired program
using the UP/DOWN/LEFT/RIGHT
buttons, and then press the INFO button to view
the program information for the selected program.
• Red button : Each press switches between program information for
one channel and all channels.
• Green button : Press to view the program information from two
hours ago.
• Yellow button : Press to view the program information for the next
two hours.
• Blue button : Press to exit.
• ENTER button : Press to watch the current program or to add the
program to remind list.
English-107
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 108
FUNCTION DESCRIPTION
4
You may now:
buttons to
• Jump to a channel directly : Use the UP/DOWN
column and press the enter
highlight the program in the RIGHT
button.
• Obtain additional program details : Highlight the title of a program
using the
, , , or buttons and press the INFO button.
• Exit from the Program Guide and return to normal viewing mode :
Press the Blue button or the EXIT button.
Note
• The current time displayed on the program information is subject to the time information sent
from the broadcasting station, so it may differ from the actual time.
• Press the GUIDE button on the remote control to view the program information for all
channels. However, this function is available only when the default program guide setting is
set to “Full Guide”.
English-108
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 109
FUNCTION DESCRIPTION
Remind List
Viewing the Remind List
If you have made a scheduled viewing list of programs you would like to
see, the channel will be automatically switched to the scheduled program at
the scheduled time even if you are watching another program.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Guide”,
then press the ENTER
button.
2
Press the ENTER
buttons to select
“Mini Guide”.
Press the UP/DOWN
buttons to select programs
you would like to see, then
press the enter button.
The symbol “✔” will be
displayed.
Each press of the ENTER
button will switch between
“Reminded” and “Clear”.
Remind List
Press the EXIT button
to exit.
Note
• Up to 8 programs can be scheduled.
English-109
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 110
FUNCTION DESCRIPTION
To View the Remind List
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Guide”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select “Remind
List”, then press the
ENTER
button.
To Remove the Scheduled Programs
1
Press the UP/DOWN
buttons to select a program
to be removed, then press
the ENTER
button.
To cancel the channels
added, press the ENTER
button again.
To remove all programs,
press the LEFT/RIGHT
buttons to select “Cancel
All”, then press the
ENTER
button.
Press the EXIT button
to exit.
English-110
02 BN68-00910A-03Eng.qxd
10/20/05 3:38 PM
Page 111
FUNCTION DESCRIPTION
Using the CableCARD (Sold separately)
(LN-R409D, LN-R469D)
This menu works with a CableCARD provided by a local cable service provider.
Prior to accessing this menu, a CableCARD should be connected to the rear panel
of the TV. For detailed connection instructions refer to the “Connecting
CableCARD” section of this manual.
Displaying CableCARD related information
Accessing information on Status, Pairing, Network Setup of the CableCARD
provided by the service provider in CableCARD menu.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“CableCARDTM”, then press
the ENTER
button.
Press the EXIT button
to exit.
English-111
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 112
FUNCTION DESCRIPTION
Using the CableCARD Setup Function
(LN-R409D, LN-R469D)
Sets up the relevant options for CableCARD.
CableCARD Reset
Resets CableCARD when the channels provided by CableCARD are not available.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“CableCARD Setup”, then
press the ENTER
button.
3
Press the ENTER
button to select
“CableCARDTM Reset”.
English-112
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 113
FUNCTION DESCRIPTION
Channel List Reorganization
Deletes and reorganizes the channel list provided by the Cable Company and authorized
by the CableCARD.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
“CableCARD Setup”, then
press the ENTER
button.
3
Press DOWN
to select
“Channel List
Reorganization”, then press
the ENTER
button.
English-113
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 114
Chapter 10
APPENDIX
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Identifying Problems
Problem
Poor picture
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low First, check the volume of units connected to your TV
at maximum volume.
(digital broadcasting receiver, DVD, cable
broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Picture rolls vertically.
Check all wire connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it
again.
Make sure the wall outlet is working.
The TV won’t turn on.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control
(transmission window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the
“Check signal cable”
PC sources.
message.
“Not Supported Mode”
Check the maximum resolution and the frequency of
message.
the Video Adapter.
Compare these values with the data in the Display
Modes.
Digital broadcasting screen
problem.
Please check the digital signal strength and input
antenna.
English-114
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 115
APPENDIX
Problem
The image is too light or too
dark.
Horizontal bars appear to
flicker, jitter or shimmer on
the image.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Screen is black and power
indicator light blinks steadily.
Image is not stable and may
appear to vibrate
when you have a computer
connected to the PC input.
Possible Solution
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine
tuning.
Adjust the Coarse tuning and then adjust the Fine
tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the
keyboard.
If the setting is not correct, use your computer utility
program to change the display settings.
NOTE: Your TV supports multiscan display functions
within the following frequency domain:
Horizontal frequency (kHz)
Vertical frequency
(Hz)
PC Maximum refresh rate
(at 60Hz)
30~60
60~75
1360 x 768
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output
source (i.e. STB) with a digital signal.
If a still image is displayed for
an extended period of time,
residual images or blurring
may appear.
When you need to leave the monitor
unused for an extended period of time, adjust
the settings so that the monitor automatically
goes into energy saving mode or activates the
screen saver to display moving images.
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require
sophisticated technology to produce. However, there may be few bright or dark pixels
on the screen. These pixels will have no impact on the performance of the product.
English-115
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 116
APPENDIX
Installing the Stand (LN-R269D, LN-R329D)
<3>
<2>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Attach the stand to the TV set as shown in the picture.
3. Use the four screws to tightly fix the stand.
Disconnecting the Stand
<2>
1.
2.
3.
4.
<3>
Place the TV faced down on a soft cloth or cushion on a table.
Remove four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap.
English-116
<4>
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 117
APPENDIX
Installing the Wall Mount Kit (LN-R269D)
Note: This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M4 X L12
Wall-Bracket
Set-Bracket
Screw: 8EA
M4 X L20
Wood Screw: 4EA
Anchor: 4EA
How to assemble the Wall Mount Bracket
1
2
3
Mark the location on the wall where the hole will be drilled.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket .
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws
Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
English-117
.
Installation Guide
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 118
APPENDIX
Installing the Wall Mount Kit (LN-R329D, LN-R409D)
Note: This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
Wall-Bracket
Set-Bracket
M4 X L15
M4 X L20
Screw: 8EA
Wood Screw: 7EA
M4 X L8
Anchor: 7EA
Screw: 3EA
Installation Guide
How to assemble the Wall Mount Bracket
1
Mark the location on the wall where the hole will be drilled.
Make over 35mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting
anchors into the wall-bracket .
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Loosen two screws on the rear side of the TV set (only model LN-R409D applied).
Attach the set-bracket onto the rear side of the TV set and secure the screws .
For 40 inches model, attach the bracket into the two holes with the two screws removed
in step 3 above.
(Only Model LN-R409D Applied)
3
Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
English-118
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 119
APPENDIX
Wall Installation Instructions (LN-R469D)
Refer to the correct installation guide according to your wall bracket.
Installation Notes
1
Contact a technician for installing the wall bracket.
2
Samsung Electronics is not responsible for any damage to the product or injury to
yourself or others if you elect to perform the wall installation.
3
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Only use the components and accessories shipped with the panel.
Wall Bracket
Hinge
Accessories
Plastic Hanger : 4
Screw
: 11
M4 X L20
1
Left : 1
Right : 1
English-119
Screw
:4
M8 X L40
Anchor : 11
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 120
APPENDIX
How to assemble the Wall Mount Bracket
1
Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
Captive Screw
Wall Bracket
Hinge (Left)
There are two hinges
(left and right). Use the
correct one.
Hinge (Right)
2
Before drilling into the wall, check if the
length between the two locking holes at
the back of the product is correct. If the
length is too short or long, loosen all or
some of the 4 screws on the wall
bracket to adjust the length.
3
Length between the
two locking holes
English-120
Check the installation diagram and
mark the drill points on the wall.
Use the 5.0 mm bit to drill holes deeper
than 35 mm. Fix each anchor in the
corresponding hole. Match each of the
brackets and hinge holes to the
corresponding anchor holes and insert
and tighten the 11 screws .
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 121
APPENDIX
Fixing the TV panel to the wall attachment panel bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
1
Remove the 4 screws on the back of the product.
2
Insert the screw
into the plastic hanger. (See the figure below)
• Mount the product on the wall bracket and make sure it is properly fixed to the left and
right plastic hangers.
• Be careful when installing the product on the bracket as fingers can be caught in the holes.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay in
place after installation.
3
Tighten the 4 screws in step 2 (plastic
hanger + screw ) to the rear holes of
the product.
4
Remove safety pin ( ) and insert the 4
product holders into the corresponding
bracket holes ( ). Then place the
product ( ) so that it is firmly fixed to
the bracket. Make sure to reinsert and
tighten the safety pin ( ) to securely
hold the product to the bracket.
LCD TV
Wall Bracket
English-121
Wall
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 122
APPENDIX
How to Adjust Mounting Angle
Note Note : Adjust the bracket angle to -2° before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it
forward (direction of the arrow) to adjust the angle.
(See the figure to the right)
3. You can adjust the bracket angle between -2°
and 15°.
English-122
Make sure to use the top center,
and not the left or the right side of
the product to adjust the angle.
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 123
APPENDIX
How to assemble the Stand-Base (LN-R469D)
1
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor
to the stand pegs. (The exterior of the set may be different than the picture.)
Warning
Firmly secure the stand to
the TV before moving it,
as the stand may fall and
could cause serious injury.
Note
• Two or more people should carry the TV. Never lay the TV on the floor because of possible
damage to the screen.
• Always store the TV upright.
English-123
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 124
APPENDIX
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may
differ from the illustration depending on the manufacturer. Please refer to the manual provided
with the Kensington lock for proper use.
Cable
Figure 2
Figure 1
<Optional>
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in
the locking direction (Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the
different television systems that are in use around the world. A TV designed for one
system may not work properly with another system due to differences in the TV channel
frequencies.
English-124
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 125
APPENDIX
CableCARD and Digital Cable Ready TVs
CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard.
This new standard is called OpenCable and it is a concerted effort to standardize the digital cable
service network interface in North America. For more information, please refer to www.cablelabs.com.
Digital Cable Ready TVs are equipped with a proper digital cable tuner to receive digital cable signals
from your local cable service provider. They are also designed to work with digital cable card modules
(PCMCIA card modules called CableCARDs). These PCMCIA card modules or CableCARDs will be
provided by your local cable service provider after a proper subscription process.
The provided CableCARD from your local cable service provider needs to be inserted into the
CableCARD slot of a Digital Cable Ready TV. Please refer to page 28 for how to insert the
CableCARD.
A digital Set-Top Box which used to be provided by the cable service provider is no longer needed
with Digital Cable Ready TVs and CableCARDs.
When the CableCARD is inserted into the slot, the TV screen will show a message that CableCARD
is inserted and necessary data such as channel information or subscription information will be
downloaded from your digital cable service provider. When you insert CableCARD for the first time,
this process may take few minutes depending on the amount of data your cable provider needs to
send. During this process, the digital cable service provider or CableCARD may display messages
on the TV screen to help or give you further information.
Please contact your local cable provider for more information on service availability and how to
acquire a CableCARD.
Note
• This television receiver supports the copy protection system regulated by DTLA (Digital Transmission
Licensing Administrator). It should be noted that copy protected content may not be viewable depending on
your particular connections.
• Some channels may be scrambled depending on your cable service provider.
When you tune to these channels, no screen or a still screen may appear. In order to view the screen properly,
you have to go through a subscription process after contacting your service provider.
It will take several minutes to update the channel information depending on your cable service provider.
English-125
02 BN68-00910A-03Eng.qxd
10/20/05 5:38 PM
Page 126
APPENDIX
Specifications
Model
LN-R269D
LN-R329D
Viewing Angle
Resolution
26 inch
22.67 (H) X 12.74 (V) inches
(575.77 (H) X 323.71 (V) mm)
a-si TFT active matrix
0.017 (H) X 0.017 (V) inches
(0.511 (H) X 0.511 (V) mm)
170/170 (H/V)
1366 (H) X 768 (V)
32 inch
27.47 (H) X 15.44 (V) inches
(697.68 (H) X 392.26 (V) mm)
a-si TFT active matrix
0.017 (H) X 0.017 (V) inches
(0.511 (H) X 0.511 (V) mm)
170/170 (H/V)
1366 (H) X 768 (V)
Frequency
Horizontal
Vertical
Display Color
30 ~ 60 kHz
60 ~ 75 Hz
16,777,216 colors
30 ~ 60 kHz
60 ~ 75 Hz
16,777,216 colors
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Input Signal
Sync Signal
Video Signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75ohm
TV
Video System
Sound System
NTSC(Analog), ATSC(Digital)
STEREO(MTS)
NTSC(Analog), ATSC(Digital)
STEREO(MTS)
Video
Color System
Video System
NTSC
CVBS, S-VHS
NTSC
CVBS, S-VHS
Component
Video In
Audio In
10. Vp-p @ 75ohm
500mVrms
10. Vp-p @ 75ohm
500mVrms
AC 110V~120V (60Hz)
AC 110V~120V (60Hz)
140W
<3W
184W
<3W
26.69 X 4.37 X 18.74 inches
(678 X 111 X 476 mm)
26.69 X 8.90 X 20.94 inches
(678 X 226 X 532 mm)
31.65 X 4.45 X 22.20 inches
(804 X 113 X 564 mm)
31.65 X 9.84 X 24.50 inches
(804 X 250 X 622.5 mm)
29.32 lbs (13.3 kg)
42.32 lbs (19.2 kg)
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Panel
Size
Display Size(HXV)
Type
Pixel Pitch
PC Resolution
Maximum mode
Optimum mode
Power Supply
Input
Power Consumption
Normal
Power Saving
Dimensions(W X D X H)
Unit: body
With Stand
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input 1
Audio Input 2
Headphone Output
Frequency
Response
RCA jack (L, R), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output(3.5ø Stereo jack 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
English-126
RCA jack (L, R), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output(3.5ø Stereo jack 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
02 BN68-00910A-03Eng.qxd
10/20/05 5:38 PM
Page 127
APPENDIX
Model
LN-R409D
LN-R469D
Viewing Angle
Resolution
40 inch
34.84 (H) X 19.59 (V) inches
(885.17 (H) X 497.67 (V) mm)
a-si TFT active matrix
0.0255 (H) X 0.0085 (V) inches
(0.648 (H) X 0.216 (V) mm)
170/170 (H/V)
1366(H) X 768(V)
46 inch
40.09 (H) X 22.54 (V) inches
(1018.353 (H) X 572.544 (V) mm)
a-si TFT active matrix
0.0293 (H) X 0.0097 (V) inches
(0.7455 (H) X 0.2485 (V) mm)
170/170 (H/V)
1366(H) X 768(V)
Frequency
Horizontal
Vertical
Display Color
30 ~ 60 kHz
60 ~ 75 Hz
16,777,216 colors
30 ~ 60 kHz
60 ~ 75 Hz
16,777,216 colors
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Input Signal
Sync Signal
Video Signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75ohm
TV
Video System
Sound System
NTSC(Analog), ATSC/QAM(Digital)
STEREO(MTS)
NTSC(Analog), ATSC/QAM(Digital)
STEREO(MTS)
Video
Color System
Video System
NTSC
CVBS, S-VHS
NTSC
CVBS, S-VHS
Component
Video In
Audio In
10. Vp-p @ 75ohm
500mVrms
10. Vp-p @ 75ohm
500mVrms
AC 110V~120V (60Hz)
AC 110V~120V (60Hz)
285W
<20W
330W
<20W
39.52 X 4.52 X 26.77 inches
(1004 X 115 X 680 mm)
39.52 X 12.99 X 29.49 inches
(1004 X 330 X 749 mm)
44.33 X 5.51 X 29.60 inches
(1126 X 140 X 752 mm)
44.33 X 14.17 X 32.28 inches
(1126 X 360 X 820 mm)
60.62 lbs (27.5 kg)
81.56 lbs (37 kg)
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Panel
Size
Display Size(HXV)
Type
Pixel Pitch
PC Resolution
Maximum mode
Optimum mode
Power Supply
Input
Power Consumption
Normal
Power Saving
Dimensions(W X D X H)
Unit: body
With Stand
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input 1
Audio Input 2
Headphone Output
Frequency
Response
RCA jack (L, R), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output(3.5ø Stereo jack 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
* Referring to Display Modes, page 128.
English-127
RCA jack (L, R), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output(3.5ø Stereo jack 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
02 BN68-00910A-03Eng.qxd
10/20/05 3:39 PM
Page 128
APPENDIX
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal the standard signal mode,
adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during
manufacture.
Mode
IBM
VESA
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
640 X 350
31.469
70.086
25.175
+/-
720 X 400
31.469
70.087
28.322
-/+
640 X 480
31.469
59.940
25.175
-/-
640 X 480
35.000
70.000
28.560
-/-
640 X 480
37.861
72.809
31.500
-/-
640 X 480
37.500
75.000
31.500
-/-
800 X 600
37.879
60.317
40.000
+/+
800 X 600
48.077
72.188
50.000
+/+
800 X 600
46.875
75.000
49.500
+/+
800 X 600
43.750
70.000
45.500
-/-
1024 X 768
48.363
60.004
65.000
-/-
1024 X 768
56.476
70.069
75.000
-/-
1024 X 768
56.672
72.000
78.434
-/-
1024 X 768
60.023
75.029
78.750
+/+
1360 X 768
47.712
60.015
85.800
+/+
English-128
">