Sony | KLV-40V400A | Sony KLV-32V400A Operating Instructions

Sony KLV-32V400A  Operating Instructions
LCD Colour TV
Operating Instructions
KLV-46V400A
KLV-40V400A
KLV-32V400A
© 2008 Sony Corporation
3-300-887-13(1)
KLV-46/40/32V400A
3-300-887-13(1)
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
The illustrations used in this manual are of the
KLV-32V400A unless otherwise stated.
Trademark information
• HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
• “BRAVIA” and
are trademarks of Sony
Corporation.
2 GB
KLV-46/40/32V400A
3-300-887-13(1)
Table of Contents
22
Start-up Guide
Using MENU Functions
4
Checking the accessories ...........................4
Inserting batteries into the remote...............4
1: Attaching the stand .................................4
2: Connecting an antenna/cable/VCR.........5
3: Preventing the TV from toppling over......6
4: Bundling the cables.................................6
5: Connecting the AC power cord ...............6
6: Performing the initial set-up ....................7
Selecting the language............................. 7
Auto-tuning the TV .................................... 7
Watching TV ..............................................8
Adjusting the viewing angle of the TV .........8
Adjust the angle left and right (swivel) ..... 8
Detaching the Table-Top Stand from
the TV..........................................................9
Safety information .....................................10
Precautions ...............................................11
Overview of the remote ..........................12
Using the Tools menu ............................. 15
Overview of the TV buttons and
indicators .................................................16
Navigating through menus........................ 22
Using the Favourite List ............................ 23
Settings adjustment .................................. 24
Picture menu ........................................... 26
Sound menu ............................................ 27
Screen menu ........................................... 28
Set-up menu............................................ 29
PC Settings menu.................................... 32
Channel Set-up menu ............................. 33
35
Additional Information
Specifications ........................................... 35
Troubleshooting ........................................ 36
17
Using Optional Equipment
Connecting optional equipment.................17
Viewing pictures from the connected
equipment .................................................18
Viewing Twin Picture.................................20
Viewing PIP (Picture in Picture) ................20
Using BRAVIA Sync (Control for HDMI) ...21
To connect the equipment that is
compatible with control for HDMI ........... 21
To make the control for HDMI settings ... 21
Control for HDMI ..................................... 21
3 GB
KLV-46/40/32V400A
3-300-887-13(1)
Start-up Guide
Checking the
accessories
1: Attaching the stand
B For KLV-46V400A/KLV-40V400A
AC power cord* (KLV-46/40V400A only)
Stand (1) and screws (3) (KLV-32V400A)
Stand (1) and screws (4) (KLV-46/40V400A)
Remote RM-GA011 (1)
Size AA batteries (R6 type) (2)
* For models with ferrite cores, do not remove these cores.
Inserting batteries into
the remote
Push and lift the cover to open.
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
4 GB
KLV-46/40/32V400A
3-300-887-13(1)
B For KLV-32V400A
Start-up Guide
2: Connecting an
antenna/cable/VCR
Connecting an antenna/cable
8
Antenna cable
(not supplied)
8
Connecting an antenna/cable and VCR
8
8
1
Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2
Fix the TV to the stand according to the
arrow marks
that guide the screw holes
using the supplied screws.
• This TV is very heavy, so two or more people
should place the TV on the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
• When installing the TV onto the wall, follow step
1 to prevent the TV panel from falling over.
• Ensure the AC power cord is away from screw
holes during stand installation to avoid damage to
the AC power cord (KLV-32V400A only).
Antenna cable
(not supplied)
S video
cable
(not
supplied)
Audio/Video
cable (not
supplied)
Antenna cable
(not supplied)
VCR
5 GB
KLV-46/40/32V400A
3-300-887-13(1)
3: Preventing the TV
from toppling over
4: Bundling the cables
5: Connecting the AC
power cord
1
Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2
Install a machine screw (M6 x 12, not
supplied) into the screw hole of the TV.
3
Tie the wood screw and the machine screw
with a strong cord.
KLV-46/40V400A KLV-32V400A
* Type of AC power cord supplied (with or without ferrite
core) varies depending on the countries.
6 GB
KLV-46/40/32V400A
3-300-887-13(1)
Press F/f to select the language displayed
on the menu screens, then press .
Start-up Guide
6: Performing the initial
set-up
3
English
4
,
Press F/f to select the country/region,
then press .
1
Select country
• Area 1: Asia (except Philippines), Middle
East, Africa and Oceania.
• Area 2: Philippines.
5
Press F/f to select “Home”, then press
.
3, 4, 5, 6, 9,
10, 11
8
Auto-tuning the TV
Selecting the language
1
Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2
Press 1 on the top edge of the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV front panel is red), press "/1
on the remote to turn on the TV.
When you turn on the TV for the first time, the
“Language” menu appears on the screen.
6
Press G/g to select “OK”, then press
.
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select “Confirm” to start auto-tuning
again. If 100 channels are found, auto-tuning is
stopped.
Continued
7 GB
KLV-46/40/32V400A
3-300-887-13(1)
7
8
When the “Programme Sorting” menu
appears on the screen, follow the steps of
“Programme Sorting” (page 33).
Watching TV
If you do not change the order in which the channels
are stored on the TV, go to step 8.
1
Press 1 on the top edge of the TV to turn
on the TV.
Press MENU to exit.
2
Press the number buttons or PROG +/– to
select a TV channel.
3
Press 2 +/– to adjust the volume.
The TV has now tuned in all the available
channels.
9
Select day and time.
Adjusting the viewing
angle of the TV
10
Select “Yes” to link the operations of the
TV and the connected equipment that is
compatible with control for HDMI
automatically.
This TV can be adjusted within the angles shown
below.
Adjust the angle left and right (swivel)
Top view
Do you want to enable control for compatible
HDMI devices?
Front
11
Press G/g to select the desired setting in
“Display this menu next time?” dialogue,
then press to exit.
z • If “Yes” is selected and the TV is turned off
by pressing 1 on the TV, or is disconnected
from the AC power outlet, the initial set-up
procedure restarts the next time the TV is
turned on.
8 GB
KLV-46/40/32V400A
3-300-887-13(1)
Start-up Guide
Detaching the TableTop Stand from the TV
Remove the screws guided by the arrow marks
of
the TV.
Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
B For KLV-46V400A/KLV-40V400A
B For KLV-32V400A
• For bracket installation, refer to the instruction
guide provided by the Wall-Mount Bracket model
for your TV. Sufficient expertise is required in
installing this TV, especially to determine the
strength of the wall for withstanding the TV’s
weight. For product protection and safety
reasons, Sony strongly recommends that you
use the Wall-Mount Bracket model designed
for your TV and the wall-mounting of your TV
should be performed by Sony dealers or
licensed contractors.
9 GB
KLV-46/40/32V400A
3-300-887-13(1)
Installed on the wall
Safety information
30 cm
10 cm
10 cm
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
10 cm
Leave at least this space around the set.
Installed with stand
• The TV set should be installed near an easily accessible
AC power outlet.
• Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the
TV.
• Only qualified service personnel should carry out wall
installations.
• For safety reasons, it is strongly recommended that you
use Sony accessories, including:
Wall-mount bracket SU-WL500 and SU-WL50B
TV stand SU-FL300M
• Be sure to use the screws supplied with the Wall-mount
bracket when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to
12 mm in length when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on
the Wall-mount bracket model.
Use of screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of
dirt or dust:
– Do not lay the TV set flat, install upside down,
backwards, or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
– Do not install the TV set as shown below.
Air circulation
is blocked.
Air circulation is blocked.
8mm - 12mm
Wall
Wall
Screw (supplied with the Wall-mount
bracket)
Mounting Hook
Hook attachment on rear of TV set
Transporting
• Before transporting the TV set,
disconnect all cables.
• Two or more people are needed to
transport a large TV set.
• When transporting the TV set by
hand, hold it as shown on the right.
Do not put stress on the LCD panel.
• When lifting or moving the TV set,
hold it firmly from the bottom.
• When transporting the TV set, do
not subject it to jolts or excessive
vibration.
• When transporting the TV set for
repairs or when moving, pack it
using the original carton and
packing material.
Ventilation
Be sure to hold
• Never cover the ventilation holes or the bottom of the
panel, not the
insert anything in the cabinet.
• Leave space around the TV set as front part.
Do not handle
shown below.
• It is strongly recommended that you with dent area.
Do not handle
use a Sony wall-mount bracket in with the
order to provide adequate airtransparent
circulation.
bottom part.
AC power cord
Handle the AC power cord and outlet as follows in
order to avoid any risk of fire, electrical shock or
damage and/or injuries:
– Use only Sony supplied AC power cords, not those of
other brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110-240 V AC supply only.
– When wiring cables, be sure to unplug the AC power
cord for your safety and take care not to catch your feet
on the cables.
– Disconnect the AC power cord from the AC power
outlet before working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the
plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Notes
• Do not use the supplied AC power cord on any other
equipment.
• Do not pinch, bend, or twist the AC power cord
excessively. The core conductors may be exposed or
broken.
• Do not modify the AC power cord.
• Do not put anything heavy on the AC power cord.
• Do not pull on the AC power cord itself when
disconnecting the AC power cord.
• Do not connect too many appliances to the same AC
power outlet.
• Do not use a poor fitting AC power outlet.
10 GB
KLV-46/40/32V400A
3-300-887-13(1)
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those listed below,
or the TV set may malfunction and cause a fire,
electrical shock, damage and/or injuries.
Precautions
Location:
• View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
Outdoors (in direct sunlight), at the seashore, on a ship or
other vessel, inside a vehicle, in medical institutions,
unstable locations, near water, rain, moisture or smoke.
Environment:
Places that are hot, humid, or excessively dusty; where
insects may enter; where it might be exposed to mechanical
vibration, near flammable objects (candles, etc). The TV
shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with the cabinet
removed, or with attachments not recommended by the
manufacturer. Disconnect the TV set from AC power outlet
and antenna during lightning storms.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you
have unplugged the AC power cord. Otherwise electric
shock may result.
When not in use
• If you will not be using the TV set for several days, the TV
set should be disconnected from the AC power for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power
when the TV set is just turned off, pull the plug from the
AC power outlet to disconnect the TV set completely.
• However, some TV sets may have features that require the
TV set to be left in standby to work correctly.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that
they are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the AC power cord
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it
checked by qualified service personnel.
When:
– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having
something thrown at it.
– Any liquid or solid object falls through openings in the
cabinet.
Viewing the TV
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
• Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal.
Mercury is sometimes contained depending on the kind of
fluorescent tubes. Follow your local ordinances and
regulations for disposal.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord connected to the TV set
from AC power outlet before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
• When adjusting the angle of the TV set, move it slowly so
as to prevent the TV set from moving or slipping off from
its table stand.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
11 GB
KLV-46/40/32V400A
3-300-887-13(1)
Overview of the remote
1 "/1 – TV standby
Turns the TV on and off from standby mode.
2 BRAVIA Sync (page 21)
• m/N/X/M/x: You can operate the BRAVIA Sync-compatible
equipment or DIGITAL MEDIA PORT-compatible equipment that is
connected to the TV.
• SYNC MENU: Displays the menu of connected HDMI CEC (Consumer
Electronics Control) equipment which is supported. While viewing other
input screens or TV programmes, “HDMI Device Selection” is displayed
when the button is pressed.
• THEATRE: You can set Theatre Mode on or off. When Theatre Mode is set
to on, the optimum audio output (if the TV is connected with an audio
system using an HDMI cable) and picture quality for film videos are
automatically set.
• Control for HDMI (BRAVIA Sync) is only available with the connected
Sony equipment that has the BRAVIA Sync logo or is compatible with
control for HDMI.
• If you turn the TV off, Theatre Mode is also turned off.
3
– Picture freeze
Freezes the TV picture. Press once to display a frozen image with the current
programme in a window. Press again to fill the screen with the frozen image.
Press third time to return to the current programme.
Freeze
Current programme
(Location of the sub
window can be moved
by pressing
Frozen picture
F/f/G/g.)
• This function is not available for Twin Picture and PC input source.
4 AUDIO – Dual Sound (page 28)
5
/ – Input select / Text hold
• Displays the connected equipment list and selects the input source
(page 18).
• In Text mode: Holds the current page.
6
F/f/G/g/
– Item select / OK
• Selects or adjusts items.
• Confirms selected items.
7 TOOLS (page 15)
8 MENU
Displays or cancels the menu.
z • The number 5, N, PROG + and
AUDIO buttons have tactile dots.
Use the tactile dots as references
when operating the TV.
9 Coloured buttons
In Text mode: Accesses the corresponding coloured Fastext menu quickly
and easily. The Fastext feature can be used only when the Fastext broadcast
is available.
0 Number buttons
• Selects channels. For channel numbers 10 and above, enter the second
digit quickly (page 33).
• In Text mode: Enters the three digit page number to select the page.
12 GB
KLV-46/40/32V400A
3-300-887-13(1)
– Favourite list
qa
Displays the Favourite list that you have specified (page 23).
qs PROG +/–/
/
• Selects the next (+) or previous (-) channel.
• In Text mode: Selects the next ( ) or previous (
qd
) page.
– Previous channel
Returns to the previous channel watched (for more than five seconds).
qf % – Mute
Press to mute the sound. Press again to restore the sound.
z • In standby mode, if you want to turn on the TV without sound, press this
button.
qg 2 +/– – Volume
Adjusts volume.
qh / – Text
In Text mode: Displays Text broadcast: Text t Text over the TV picture
(mix mode) t No Text (exit the Text service).
• Text language displays can be either English, Persian or French depending
on your broadcast signal.
qj RETURN
Returns to the previous screen of any displayed menu.
qk a – TV mode
Exit Text mode, or switches to a TV display when displaying external input.
– Twin Picture / PIP (page 20)
ql
Displays two pictures simultaneously.
w;
/
– Info / Text reveal
• Displays information. Press once to display current channel number and
screen mode. Press again to display clock information. Press third time to
remove the display from the screen.
• In Text mode: Reveals hidden information (e.g. answers to a quiz).
wa
– Wide Mode
Changes the picture size. Press repeatedly to select the desired wide mode.
Continued
13 GB
KLV-46/40/32V400A
3-300-887-13(1)
For TV, Video, HD/DVD, HDMI or DIGITAL MEDIA PORT (except PC
input)
Wide Zoom*
Enlarges the centre portion of the picture. The left and
right edges of the picture are stretched to fill the 16:9
screen.
Normal
Displays the 4:3 picture in its original size. Side bars are
shown to fill the 16:9 screen.
Full
Stretches the 4:3 picture horizontally, to fill the 16:9
screen.
Zoom*
Displays cinemascopic (letter box format) broadcasts in
the correct proportions.
* Parts of the top and bottom of the picture may be cut off.
• You cannot select “Normal” for HD signal source pictures.
For PC Input
Full 1
Stretches the original picture to fill the screen vertically.
Full 2
Stretches the Full 1 picture horizontally to fill the 16:9
screen.
14 GB
KLV-46/40/32V400A
3-300-887-13(1)
Using the Tools menu
Press TOOLS enables you to access various viewing options and change/make adjustments according to the source
and screen mode. The options displayed vary depending on the input source.
Viewing TV programme
Viewing connected equipment
Options
Description
Options
Description
Picture Mode
See page 26.
Picture Mode (except PC
input mode)
See page 26.
Display Mode (in PC input
mode only)
See page 26.
Sound Mode
See page 27.
Intelligent Picture
See page 33.
MPEG Noise
Reduction
See page 26.
Speaker
See page 30.
Add to Favourites
You can add the current
channel to the favourite list.
Sleep Timer
See page 31.
Power Saving
See page 31.
Sound Mode
See page 27.
MPEG Noise Reduction
(except PC input and
component input mode)
See page 26.
Speaker
See page 30.
Twin Picture (except PC and
DMPORT input mode)
See page 20.
PIP (in PC input mode only)
See page 20.
Single Picture (in Twin
Picture and PIP mode only)
See page 20.
Audio Swap (in PIP mode
only)
See page 20.
Auto Adjustment (in PC
input mode only)
See page 32.
Horizontal Shift (in PC
input mode only)
See page 32.
Sleep Timer (except PC
input mode)
See page 31.
Power Saving
See page 31.
Device Control
[in HDMI input mode
(except HDMI PC input)
only]
Displays the menu screen
to operate the connected
HDMI-compatible
equipment.
Device Control (Menu)
(in DMPORT input mode
only)
If the connected DIGITAL
MEDIA PORTcompatible equipment has
the operation menu,
displays it directly.
Control Panel
(in DMPORT input mode
only)
Displays the control panel
to operate the connected
DIGITAL MEDIA PORTcompatible equipment.
15 GB
KLV-46/40/32V400A
3-300-887-13(1)
Overview of the TV buttons and indicators
1
Displays or cancels the menu.
2
/
– Input select / OK
• Displays the connected equipment list and selects
the input source (page 18).
• In TV menu: Selects the menu or option, and
confirms the setting.
3 2 +/-/
/
• Increases (+) or decreases (-) the volume.
• In TV menu: Moves through the options right (
or left ( ).
4 PROG +/-/
)
/
• Selects the next (+) or previous (-) channel.
• In TV menu: Moves through the options up (
down ( ).
) or
5 1 – Power
Turns the TV on or off.
• To disconnect the TV from the AC power
completely, pull the plug from the AC power
outlet.
6 Light sensor (page 31)
Do not put anything over the sensor, as its function
may be affected.
7
/
– Picture Off / Timer indicator
• Lights up in green when the picture is turned off
(page 31).
• Lights up in amber when the timer is set (page 31).
8 1 – Standby indicator
Lights up in red when the TV is in standby mode.
9 " – Power indicator
• Lights up in green when the TV is turned on.
• Flashes while the remote is being operated.
0
– Remote sensor
Receives IR signals from the remote.
16 GB
KLV-46/40/32V400A
3-300-887-13(1)
Using Optional Equipment
Connecting optional equipment
You can connect a wide range of optional equipment to your TV.
For service use only
Audio system
PC (HDMI output)
S VHS/Hi8/
DVC
camcorder
Blu-ray disc player
Using Optional Equipment
DVD player
Headphones
Digital video camera
DC 5V
0.7A MAX
DMPORT
DC 5V
0.7A MAX
PC
DMPORT
DIGITAL MEDIA PORT
adaptor
Hi-Fi audio
equipment
Video game equipment
DVD player without component video
output
VCR
DVD player with component video output
DVD recorder
VCR
Continued
17 GB
KLV-46/40/32V400A
3-300-887-13(1)
Viewing pictures from the connected equipment
Turn on the connected equipment, then press
/ to display the connected equipment list.
Press F/f to select the desired input source, then press . (The highlighted item is selected if
2 seconds pass without any operation after pressing F/f.) When the input source is set to “Skip”
in the “Video Labels” under the “AV Set-up” menu (page 29), that input does not appear in the
list.
z • Press
/ on the top edge of the TV to display the connected equipment list and select the desired input source.
You can also press F/f to select the desired input source. Then wait for 2 seconds to display the selected input
source.
Jacks/
Input symbol on screen
Description
A HDMI IN 2
I HDMI IN 1 or 3
Connect to the HDMI IN 1, 2 or 3 jack if the equipment has an HDMI jack. The digital
video and audio signals are input from the equipment. In addition, when you connect
the equipment that is compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 30 to set-up this communication. If
the equipment has a DVI jack, connect the DVI jack to the HDMI IN 3 jack through a
DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out
jack to the audio in jack in the HDMI IN 3 jack.
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p,
720p (50/60 Hz), 1080i (50/60 Hz), 1080p (50/60 Hz) and 1080/24p.
• Be sure to use only an HDMI cable that bears the HDMI logo (recommended
Sony HDMI cable).
• When connecting an audio system with HDMI jack, be sure to also connect to the
audio output jacks
(refer G in page 17) to listen to the sound from the TV
on audio system.
HDMI 1 or
HDMI 2 or
HDMI 3
B
2, and
2
Video 2
Ci
D
and
Connect to the video jack
2, and the audio jacks
equipment, connect to the L(MONO) jack
2.
2. If you connect mono
Connect to the i jack to listen to sound from the TV on headphones.
1 or
1 or 3,
1 or 3
Video 1 or
Video 1 or
Video 3
E
/
F
/
Connect to the S video jack
1 or the video jack
1 or 3, and the audio jacks
1 or 3. To avoid picture noise, do not connect the camcorder to the video jack
1
and the S video jack
1 at the same time. If you connect mono equipment, connect
to the L(MONO) jack
1 or 3.
Connect to the video output jack
to record the image from the TV. Connect to the
audio output jacks
to record the sound from the TV on DVD recorder or VCR. To
turn off the sound of the TV speakers, set “Speaker” to “Audio System” (page 30). If
you connect mono equipment, connect to the L jack
.
• The monitor output jacks cannot support HD/DVD, HDMI and PC signals source
pictures, also digital audio signal for sound.
1 or 2
HD/DVD 1 or
HD/DVD 2
G
Connect to the component jacks and the audio jacks
/ 1 or 2. For better picture
quality, component connection is recommended if your DVD player has a component
video output.
Connect to the audio output jacks
to listen to the sound from the TV on Hi-Fi audio
equipment. To turn off the sound of the TV speakers, set “Speaker” to “Audio System”
(page 30).
H PC IN
PC
(RGB)/
Connect to the PC IN
(RGB) jack and the audio jack
use a PC cable with ferrite core.
. It is recommended to
18 GB
KLV-46/40/32V400A
3-300-887-13(1)
Jacks/
Input symbol on screen
Description
J DMPORT
You can play audio or video (optional cable required) of a portable audio player that is
connected to the TV using a DIGITAL MEDIA PORT adaptor.
Depending on the connected DIGITAL MEDIA PORT adaptor, you can operate the
connected equipment using the TV as follows;
DMPORT
– Using the remote of the TV: N/x/X/m/M.
– Using the Tools menu function: Press TOOLS, and select “Control Panel”.
• This function may be not available for certain connected equipment. Refer to the
instruction manual of the connected equipment for details.
• Do not connect or disconnect a DIGITAL MEDIA PORT adaptor while the TV
is turned on.
• The connected equipment is not charged when the TV is turned off or in standby
mode.
Using Optional Equipment
19 GB
KLV-46/40/32V400A
3-300-887-13(1)
Viewing Twin Picture
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 17), and make
sure that images from the equipment appear on the
screen (page 18).
1
Press
.
Two pictures are displayed simultaneously.
Viewing PIP (Picture in
Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 17), and make sure that images
from a PC appear on the screen (page 18).
1
Press
.
Two pictures are displayed simultaneously.
Left
Window
Sub Window
(Location of the
sub window can
be moved by
pressing
Right Window
Main
Window
F/f/G/g.)
Twin Picture Availability
In Left Window
In Right Window
HD/DVD 1
HD/DVD 2
TV programme
HDMI 1 (except PC input mode)
HDMI 2 (except PC input mode)
HDMI 3 (except PC input mode)
Video 1 or S Video 1
Video 2
Video 3
2
3
No picture
Press G/g to select active picture.
Press number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press
or RETURN.
• This function is not available when displaying a
PC input or DIGITAL MEDIA PORT input.
• You cannot change the size of the pictures.
• The picture and sound from the monitor output
jacks
/
(refer E in page 17) will follow
the left picture (Video 1/S Video 1/Video 2/
Video 3 only). However, if audio output jacks
(refer G in page 17) are connected, the sound will
follow TV speaker.
• In Twin Picture mode, as picture size reduced, this
may decrease picture smoothness.
z • The picture framed in grey is audible. You can
switch the audible picture by pressing G/g.
• You can also use the Twin Picture feature by
selecting “Twin Picture” from the Tools menu.
PIP Availability
In Main Window
In Sub Window
PC
HDMI 1 (in PC input mode only) TV programme
HDMI 2 (in PC input mode only)
HDMI 3 (in PC input mode only)
2
Press number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press RETURN.
• You cannot display resolutions higher than
WXGA (1360 × 768 pixels).
• “Power Management” is not available in PIP
mode (page 32).
• The sound will follow TV speaker when audio
output jacks
(refer G in page 17) are
connected.
• In PIP mode, as picture size reduced, this may
decrease picture smoothness.
z • You can switch the audible picture by selecting
“Audio Swap” from the Tools menu.
• You can also use the PIP feature by selecting
“PIP” from the Tools menu.
20 GB
KLV-46/40/32V400A
3-300-887-13(1)
Using BRAVIA Sync
(Control for HDMI)
The control for HDMI function enables the TV to
communicate with the connected equipment that is
compatible with the function, using HDMI CEC
(Consumer Electronics Control).
For example, by connecting Sony equipment that is
compatible with control for HDMI (with HDMI
cables), you can control them together.
Be sure to connect the compatible equipment
correctly, and make the necessary settings.
Using Optional Equipment
To connect the equipment that is
compatible with control for HDMI
Connect the compatible equipment and the TV with an
HDMI cable. When connecting an audio system, in
addition to the HDMI cable, be sure to also connect to
the audio output jacks
(refer G in page 17) to
listen to the sound from the TV on audio system. For
details, see page 17.
To make the control for HDMI settings
The control for HDMI settings must be set on both the
TV side and the connected equipment side. See
“HDMI Set-up” on page 30 for the TV side settings.
See the operating instructions of the connected
equipment for setting details.
Control for HDMI
• Automatically turns the connected equipment off
when you turn the TV off.
• Automatically turns the TV on and switches the
input to the connected equipment when the
equipment starts to play.
• If you turn on a connected audio system while the
TV is on, the sound output switches from the TV
speaker to the audio system.
• Adjusts the volume (2 +/–) and mutes the sound
(%) of a connected audio system.
• You can operate the connected Sony equipment that
has the BRAVIA Sync logo by the TV remote by
pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI CEC equipment which is supported on the
screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g and .
– TOOLS to display “Device Control”, then select
options from “Menu”, “Options”, and “Content
List” to operate the equipment.
Refer to the instruction manual of the equipment for
available control.
21 GB
KLV-46/40/32V400A
3-300-887-13(1)
Using MENU Functions
Navigating through menus
“MENU” allows you to enjoy various convenient
features of this TV. You can easily select channels or
inputs sources and change the settings for your TV.
1
2
Press MENU.
Press F/f to select an option, then press
.
To exit the menu, press MENU.
2
1
1 Favourites
Displays the favourite list (page 23).
• To watch the desired channel, select the
favourite channel number, then press .
• To add the current channel to the favourite list,
select “Add to Favourites”. When the
favourite list is full, select “Edit Favourites”
to remove any channel from your list and try
again (page 23).
2 Programme List
Displays available TV channels.
• To watch the desired channel, select the
channel, then press .
• To assign a label to a channel, select “Edit
Programme Labels”, then see page 33.
3 External Inputs
Selects equipment connected to your TV.
• To watch the desired external input, select the
input source, then press .
• To assign a label to an external input, select
“Edit Video Labels”, then see page 29.
• To select the equipment that is compatible
with control for HDMI, select “HDMI Device
Selection”.
4 Settings
Displays the “Settings” menu where most of the
advanced settings and adjustments are performed.
For details about settings, see page 24 to 25.
22 GB
KLV-46/40/32V400A
3-300-887-13(1)
Using the Favourite List
The Favourite feature lets you select programmes
from a list of up to 16 favourite channels that you
specify.
1
2
Press MENU.
3
Perform the desired operation as shown in
the following table or displayed on the
screen.
Press F/f to select “Favourites”, then
press .
Favourite List
To
Do this
Watch a channel
Press F/f to select the channel number, then press
Turn off the Favourite list
Press RETURN to return to the previous screen.
Press MENU or
to exit the menu.
Add a current channel to the Favourite
list
Press F/f to select “Add to Favourites”, then press
Remove a channel from the Favourite
list
Press F/f to select “Edit Favourites”, then press .
The “Favourite Set-up” screen appears. For details, see “Favourite Set-up”
on page 33.
.
Using MENU Functions
.
23 GB
KLV-46/40/32V400A
3-300-887-13(1)
Settings adjustment
You are able to change the settings of your TV from “Settings” menu.
1
2
3
Press MENU. Press F/f to select “Settings”, then press
Press F/f to select a menu icon, then press
.
.
Press F/f/G/g to select an option or adjust a setting, then press
.
The following is an overview of the items that can be adjusted.
Picture
TV
Picture Mode
Reset
Backlight
Picture
Brightness
Colour
Hue
Colour Temperature
Sharpness
Noise Reduction
MPEG Noise Reduction
Advanced Settings
Select:
Vivid
Max
Max
40
60
Cool
18
High
Low
Set:
Exit: MENU
Picture menu (page 26)
“Picture Mode”: “Vivid” t “Standard” t “Cinema” (except PC input mode)
“Display Mode”: “Video” t “Text” (in PC input mode only)
“Reset”
“Backlight”
“Picture”
“Brightness”
“Colour”
“Hue”
“Colour Temperature”: “Cool” t “Neutral” t “Warm 1” t “Warm 2”
“Sharpness”
“Noise Reduction”: “High” t “Medium” t “Low” t “Off”
“MPEG Noise Reduction”: “High” t “Medium” t “Low” t “Off”
“Advanced Settings”: “Adv. Contrast Enhancer”, “Live Colour”
Sound
TV
Sound Mode
Reset
Treble
Bass
Balance
Intelligent Volume
Volume Offset
Surround
Voice Zoom
Sound Booster
Dual Sound
Select:
Dynamic
+10
+10
0
Off
0
Off
0
Mono
Set:
Exit: MENU
Screen
TV
Wide Mode
Auto Wide
4:3 Default
Wide Zoom
Display Area
Horizontal Shift
Vertical Shift
Vertical Size
Full Pixel
0
Select:
Set:
0
Sound menu (page 27)
“Sound Mode”: “Dynamic” t “Standard” t “Clear Voice”
“Reset”
“Treble”
“Bass”
“Balance”
“Intelligent Volume”: “On” t “Off”
“Volume Offset”
“Surround”: “S-FORCE Front Surround” t “Simulated Stereo” t “Off”
“Voice Zoom”
“Sound Booster”: “High” t “Low” t “Off”
“Dual Sound”
Screen menu (page 28)
“Wide Mode”: “Wide Zoom” t “Normal” t “Full” t “Zoom”
“Auto Wide”: “On” t “Off”
“4:3 Default”: “Wide Zoom” t “Normal” t “Off”
“Display Area”: “Full Pixel” t “Normal” (KLV-46V400A/KLV-40V400A
only)
“Horizontal Shift”
“Vertical Shift”
“Vertical Size”
Exit: MENU
24 GB
KLV-46/40/32V400A
3-300-887-13(1)
TV
Set-up
Language
English
Cinema Drive
AV Set-up
HDMI Set-up
Timer Settings
Off
Power Saving
Light Sensor
Product Information
Standard Power
Off
Factory Settings
Select:
Set:
Exit: MENU
PC Settings
PC
Wide Mode
Reset
Auto Adjustment
Phase
Pitch
Horizontal Shift
Power Management
Set-up menu (page 29)
“Auto Start-up”
“Language”: “English” t “
(Arabic) t “
Auto Start-up
” (Chinese) t “
” (Persian)
” (Thai) t “
”
“Cinema Drive”: “Auto” t “Off”
“AV Set-up”: “Video Labels”, “Auto S Video”, “Speaker”, “Audio Out”,
“Colour System”
“HDMI Set-up”: “Control for HDMI”, “Auto Devices Off”, “Auto TV On”,
“Device List Update”, “HDMI Device List”
“Timer Settings”: “Sleep Timer”, “On Timer”, “Clock Set”
“Power Saving”: “Standard Power” t “Reduced Power” t “Picture Off”
“Light Sensor”: “On” t “Off”
“Product Information”
“Factory Settings”
PC Settings menu (page 32)
“Wide Mode”: “Full 1” t “Full 2”
“Reset”
“Auto Adjustment”
“Phase”
“Pitch”
“Horizontal Shift”
“Power Management”: “On” t “Off”
Full 1
0
0
0
Off
Resolution:
Set:
Exit: MENU
TV
Channel Set-up
1 Digit Direct
Favourite Set-up
Auto Tuning
Off
Programme Sorting
Programme Labels
Programme Block
Intelligent Picture
On with Indicator
Manual Programme Preset
Select:
Set:
Exit: MENU
Channel Set-up menu (page 33)
“1 Digit Direct”: “On” t “Off”
“Favourite Set-up”
“Auto Tuning”
“Programme Sorting”
“Programme Labels”
“Programme Block”
“Intelligent Picture”: “On with Indicator”t “On”t “Off”
“Manual Programme Preset”: “Programme”, “TV System”, “VHF Low”/ “VHF
High”/ “UHF”, “Label”, “AFT”, “Audio Filter”,
“Skip”, “Colour System”, “Signal Booster”,
“Signal Level”
Using MENU Functions
Select:
• The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed.
25 GB
KLV-46/40/32V400A
3-300-887-13(1)
Picture menu
Press MENU and select “Settings”. Make sure the “Picture” icon (
) is selected, then press
.
Picture Mode
Selects the picture mode except for PC input source.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Cinema”: For optimum picture quality of film videos.
Display Mode
Selects the display mode for PC input source.
“Video”: For video images.
“Text”: For text, charts or tables.
• The options displayed vary depending on the input source.
Reset
Resets all the “Picture” settings except “Picture Mode” and “Display Mode” to the
factory settings.
Backlight
Adjusts the brightness of the backlight.
Picture
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones and red tones.
• “Hue” can only be adjusted for an NTSC colour system (e.g. U.S.A. video tapes).
• “Hue” is not available for PC input, component and HDMI input source.
Colour Temperature
Adjusts the whiteness of the picture.
“Cool”: Gives the white colours a blue tint.
“Neutral”: Gives the white colours a neutral tint.
“Warm 1”/“Warm 2”: Gives the white colours a red tint. “Warm 2” gives a redder
tint than “Warm 1”.
• “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”.
Sharpness
Sharpens or softens the picture.
Noise Reduction
Reduces the picture noise (snowy picture) in a weak broadcast signal.
“High”/“Medium”/“Low”: Modifies the effect of the noise reduction.
“Off ”: Turns off the “Noise Reduction” feature.
MPEG Noise Reduction Reduces the picture noise in MPEG-compressed video.
Choose either “High”, “Medium”, “Low” or “Off ”.
• “MPEG Noise Reduction” is not available for a PC input and component input
source.
Advanced Settings
Customises the “Picture” function in more detail. When you set “Picture Mode” to
“Standard” or “Cinema”, you can set/change these settings.
“Adv. Contrast Enhancer”: Automatically adjusts “Backlight” and “Picture” to
the most suitable settings judging from the brightness of the screen. This setting is
especially effective for dark images scenes. It will increase the contrast distinction
of the darker picture scenes.
“Live Colour”: Makes colours more vivid.
• “Advanced Settings” is not available for a PC input source or when “Picture Mode”
is set to “Vivid”.
26 GB
KLV-46/40/32V400A
3-300-887-13(1)
Sound menu
Press MENU and select “Settings”. Press F/f to select the “Sound” icon (
), then press
.
“Dynamic”: Enhances treble and bass. Recommended for home entertainment.
“Standard”: For standard sound.
“Clear Voice”: Makes voice sound clearer.
Reset
Resets all the “Sound” settings except “Sound Mode” and “Dual Sound” to the
factory settings.
Treble
Adjusts higher-pitched sounds.
Bass
Adjusts lower-pitched sounds.
Balance
Emphasises left or right speaker balance.
Intelligent Volume
Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend
to be louder than programmes).
Volume Offset
Adjusts the volume level of the current input relative to other inputs.
Surround
“S-FORCE Front Surround”: Available for normal stereo broadcast and 5.1ch
broadcast surround audio, and the audio input from connected equipment.
“Simulated Stereo”: Adds a surround-like effect to mono programmes.
“Off”: Converts and reproduces 5.1ch and other broadcast surround audio as normal
stereo audio (2ch). Reproduces the original audio of other broadcasts as it is.
Voice Zoom
Adjusts the clarity of human voices. For example, if the voice of a news announcer
is indistinct, you can turn up this setting to make the voice clearer. Conversely, if you
are watching a sports programme, you can turn down this setting to soften the voice
of the commentator.
Sound Booster
Gives sound more impact by compensating for phase effects in speakers.
Choose either “High”, “Low” or “Off”.
• “Sound Booster” is available when “Sound Mode” is set to “Standard”.
Using MENU Functions
Sound Mode
Continued
27 GB
KLV-46/40/32V400A
3-300-887-13(1)
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
Selection
NICAM stereo
Stereo (stereo sound)
Mono (regular sound)
NICAM bilingual
Main (main sound)
Sub (sub sound)
Mono (regular sound)
NICAM monaural
Main (main sound)
Mono (regular sound)
A2 (German) stereo
Stereo (stereo sound)
Mono (regular sound)
A2 (German) bilingual
Main (main sound)
Sub (sub sound)
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select “Mono”.
The sound becomes monaural, but the noise is reduced.
• The “Dual Sound” setting is memorized for each programme position.
• You cannot receive a stereo broadcast signal when “Mono” is selected for the
programme position.
• You cannot receive stereo or dual sound when “Low” or “High” is selected in
“Audio Filter” (page 34).
z • NICAM is receivable in following countries/regions. Hong Kong, Singapore, New
Zealand, Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia,
Thailand, etc.
• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”,
“Main” or “Sub”. However, when the external equipment connected to the HDMI
jack is selected, this is fixed to “Stereo”, except HDMI IN 3 with DVI analogue
sound input.
Screen menu
Press MENU and select “Settings”. Press F/f to select the “Screen” icon (
), then press
.
• “Screen” menu is not available when receiving PC signal. When receiving PC signal, you can use “PC Settings”
menu to perform related settings (page 32).
Wide Mode
For details about the wide mode, see page 14.
Auto Wide
Automatically changes the wide mode according to the input signal from an external
equipment. To keep your setting, select “Off”.
• “Auto Wide” is not available when watching TV programmes.
z • Even if “Auto Wide” is set to “On” or “Off”, you can always modify the format of
the screen by pressing
repeatedly.
4:3 Default
Selects the default screen mode for use with 4:3 broadcasts.
“Wide Zoom”: Displays conventional 4:3 broadcasts with an imitation wide screen
effect.
“Normal”: Displays conventional 4:3 broadcasts in the correct proportions.
“Off”: Keeps the current “Wide Mode” setting when the channel or input is
changed.
• “4:3 Default” is available only if “Auto Wide” is set to “On”.
• “4:3 Default” is not available when watching TV programmes or for a HD input
signal.
28 GB
KLV-46/40/32V400A
3-300-887-13(1)
Display Area
(KLV-46V400A/
KLV-40V400A only)
Adjusts the screen area for displaying the picture.
“Full Pixel”: Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p
sources (HDMI or component input only) or 1080/24p sources (HDMI input only)
in the original size when parts of the picture are cut off.
“Normal”: Displays the recommended picture area.
• “Display Area” is available only when “Wide Mode” is set to “Full”.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when “Wide Mode” is set to “Wide
Zoom” or “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom” or
“Zoom”.
Set-up menu
Press MENU and select “Settings”. Press F/f to select the “Set-up” icon (
), then press
.
Starts the initial set-up procedure.
Usually, you do not need to do this operation because it was done when the TV was
first installed (page 7).
However, this option allows you to repeat the process (e.g. to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Language
Selects the language in which the menus are displayed.
Cinema Drive
Provides smoother picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
“Auto”: Provides smoother picture movement than the original film video. Use this
setting for standard use.
“Off”: Turns off the “Cinema Drive” feature.
• If the image contains irregular signals or too much noise, “Cinema Drive” will be
automatically turned off even if “Auto” is selected.
• “Cinema Drive” is not available for a PC input source.
AV Set-up
Using MENU Functions
Auto Start-up
Video Labels
Assigns a name to any equipment connected to the side and rear jacks. The name will
be displayed briefly on the screen when the equipment is selected. You can skip input
signals from connected equipment that you do not want displayed on the screen.
1 Press F/f to select the desired input source, then press .
2 Press F/f to select the desired option below, then press .
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels”
(page 33).
“Skip”: Skips an unnecessary input source.
Auto S Video
Selects the input signal from S video jack
1 when
/
1 jacks are both
connected.
“On”: Switches automatically between the S video jack and the composite video
jacks depending on the cable connection.
“Off”: Activates the composite video jacks.
Continued
29 GB
KLV-46/40/32V400A
3-300-887-13(1)
Speaker
Turns on/off the TV’s internal speakers.
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound
through the TV speakers.
“Audio System”: The TV speakers are turned off in order to listen to the TV’s sound
only through your external audio equipment connected to the audio output jacks.
You can also turn on the connected equipment that is compatible with control for
HDMI, after making the appropriate settings of control for HDMI.
• All items in “Sound” menu except “Dual Sound” are not available when “Speaker”
is set to “Audio System”.
Audio Out
“Variable”: The audio output from your audio system can be controlled by the TV’s
remote.
“Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume
control to adjust the volume (and other audio settings) through your audio system.
• “Audio Out” is not available for audio system connected to the TV using the HDMI
jacks.
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”
or “PAL60”) according to the composite video signal from the input source.
HDMI Set-up
Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI jacks of the TV. Note that
communication settings must also be made on the connected equipment.
Control for HDMI
Sets whether or not to link the operations of the TV and the connected equipment that
is compatible with control for HDMI. When set to “On”, the following menu items
can be performed.
If the specific Sony equipment that is compatible with control for HDMI is
connected, this setting is applied to the connected equipment automatically when the
“Control for HDMI” is set to “On” using the TV.
Auto Devices Off
When this is set to “On”, the connected equipment that is compatible with control for
HDMI turns off when you turn off the TV.
Auto TV On
When this is set to “On”, the TV turns on when you turn on the connected equipment
that is compatible with control for HDMI.
Device List Update
Creates or updates the “HDMI Device List”. Up to 11 compatible equipment items
can be connected, and up to 5 equipment items can be connected to a single jack. Be
sure to update the “HDMI Device List” when you change the connections or settings.
If the specific Sony equipment that is compatible with control for HDMI is
connected, this setting is applied to the connected equipment automatically when the
“Device List Update” is executed on the TV.
HDMI Device List
Displays a list of connected equipment that is compatible with control for HDMI.
• You cannot use “Control for HDMI” and “Device List Update” if the TV
operations are linked to the operations of an audio system that is compatible with
control for HDMI.
30 GB
KLV-46/40/32V400A
3-300-887-13(1)
Timer Settings
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the “Sleep Timer” is activated, the
(Timer) indicator on the TV front panel
lights up in amber.
z • If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
• A notification message appears on the screen one minute before the TV switches
to standby mode.
On Timer
Sets the timer to turn on the TV from standby mode.
“Day”: Selects the day on which you want to activate the “On Timer”.
“Time”: Sets the time to turn on the TV.
“Duration”: Selects the time period after which the TV automatically switches to
standby mode again.
Clock Set
Allows you to adjust the clock manually.
Selects the power saving mode to reduce the power consumption of the TV.
Choose either “Standard Power”, “Reduced Power” or “Picture Off”.
When “Picture Off” is selected, the picture is turned off and the
(Picture Off)
indicator on the TV front panel lights up in green. The sound remains unchanged.
Light Sensor
“On”: Automatically optimises the picture settings according to the ambient light in
the room.
“Off”: Turns off the “Light Sensor” feature.
• Be sure not to put anything over the sensor, as its function may be affected.
Product Information
Displays your TV’s product information.
Factory Settings
Resets all settings to factory settings other than “Programme Block”, “Favourites”
settings, and the programme preset data. After completing this process, the initial
set-up screen is displayed the next time you turn on the TV. Completing auto tuning
in initial set-up will reset these settings. To keep them, select “Cancel” in the auto
tuning confirmation dialog.
• Be sure not to turn the TV off during this period (it takes about 30 seconds) or press
any buttons.
Using MENU Functions
Power Saving
31 GB
KLV-46/40/32V400A
3-300-887-13(1)
PC Settings menu
Press MENU and select “Settings”. Press F/f to select the “PC Settings” icon (
), then press
.
Wide Mode
Selects a screen mode for displaying input from your PC, see page 14.
“Full 1”: Enlarges the picture to fill the display area, keeping its original horizontalto-vertical aspect ratio.
“Full 2”: Enlarges the picture to fill the display area.
Reset
Resets all the “PC Settings” except “Wide Mode” and “Power Management” to the
factory settings.
Auto Adjustment
Automatically adjusts the display position and phase of the picture when the TV
receives an input signal from the connected PC.
z • “Auto Adjustment” may not work well with certain input signals. In such cases,
manually adjust “Phase” and “Horizontal Shift”.
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift
Adjusts the horizontal position of the picture.
Power Management
Switches the TV to standby mode if no signal is received for 30 seconds.
PC Input Signal Reference Chart for supported signals and “Resolution:” value displayed
Signals
VGA
SVGA
XGA
WXGA
Horizontal (Pixel) Vertical (Line)
640
640
720
800
800
1024
1024
1024
1280
1280
1360
480
480
400
600
600
768
768
768
768
768
768
Horizontal
frequency
(kHz)
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60
47.4
47.8
47.7
Vertical
frequency
(Hz)
60
75
70
60
75
60
70
75
60
60
60
Standard
VGA
VESA
VGA-T
VESA Guidelines
VESA
VESA Guidelines
VESA
VESA
VESA
VESA
VESA
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed
according to your settings.
• When connecting a personal computer to HDMI IN 1, 2 or 3 jack, your TV can only display the signals (boldfaced)
in the above chart with a 60 Hz vertical frequency.
z • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical
frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected
automatically.
32 GB
KLV-46/40/32V400A
3-300-887-13(1)
Channel Set-up menu
Press MENU and select “Settings”. Press F/f to select the “Channel Set-up” icon (
1 Digit Direct
), then press
.
When “1 Digit Direct” is set to “On”, you can select a channel using one preset
number button (0 - 9) on the remote.
• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and
above entering two digits using the remote.
Favourite Set-up
Allows you to set your favourite channels by assigning the desired channel numbers.
1 Press F/f to select your favourite channel number, then press .
2 Press F/f to select your desired channel, then press .
To reset the Favourite channels
Select “_ _”, then press .
Repeat the procedure above to set other favourite channels.
Tunes in all the available channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters.
Programme Sorting
Changes the order in which the channels are stored on the TV.
1 Press F/f to select the channel you want to move to a new position, then
press .
2 Press F/f to select the new position for your channel, then press .
Programme Labels
Assigns a channel name of your choice up to five letters or numbers. The name will
be displayed briefly on the screen when the channel is selected.
1 Press F/f to select the channel you want to name, then press .
2 Press F/f to select the desired letter or number (“_” for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
To delete all the characters
Select “Reset”, then press
.
3 Repeat the procedure in step 2 until the name is completed.
4 Select “OK”, then press .
Programme Block
Intelligent Picture
Blocks an individual channel from being watched.
1 Press F/f to select the channel you want to block, then press
2 Press F/f to select “Block”, then press .
To watch the channel, select “Allow”.
Using MENU Functions
Auto Tuning
.
“On with Indicator”: Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is changed from an input
screen to a TV programme.
“On”: Automatically reduces the picture noise.
“Off”: Turns off the “Intelligent Picture” feature.
Continued
33 GB
KLV-46/40/32V400A
3-300-887-13(1)
Manual Programme
Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”/“Signal
Booster”, press PROG +/- to select the programme number with the channel. You
cannot select a programme number that is set to “Skip” (page 34).
Programme/TV System/VHF or UHF
Presets programme channels manually.
1 Select “Programme”, then press .
2 Press F/f to select the programme number you want to manually tune
(if tuning a VCR, select channel 00), then press RETURN.
3 Press F/f to select “TV System”, then press .
4 Press F/f to select your TV broadcast systems, then press .
5 Press F/f to go to the frequency range indication (“VHF Low”, “VHF
High” or “UHF”), then press .
6 Tune the channels as follows:
Press G/g to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press G/g.
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
To input characters:
1 Press F/f to select the desired letter or number (“_” for a blank space),
then press g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
2
Repeat the procedure in step 1 until the name is completed, then press
.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the
fine tuning is performed automatically.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono programmes.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting “Off”.
• You cannot receive stereo or dual sound when “Low” or “High” is selected.
Skip
Skips unused channels when you press PROG +/- to select channels. (You can still
select a skipped channel using the number buttons.)
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”
or “PAL60”) according to the channel.
Signal Booster (Intelligent Signal Booster)
Improves the picture quality if the TV signal is too strong or weak.
Press F/f to select either “Off” if the signal is too strong (picture distorted; picture
with lines; signal interference) or “Auto” if the signal is weak (snowy picture), then
press .
Signal Level
Displays the signal level for programme currently being watched.
red
(weak)
amber
(average)
green
(good)
34 GB
KLV-46/40/32V400A
3-300-887-13(1)
Additional Information
Specifications
Model name
System
Panel System
TV System
Colour System
Channel Coverage
Sound Output
Input/Output jacks
Antenna
1
1, 2, 3
1, 2, 3
1, 2
1, 2
KLV-46V400A
KLV-40V400A
KLV-32V400A
LCD (Liquid Crystal Display) Panel
B/G, I, D/K, M
PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
I:
UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41,
Z1 to Z39
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
10 W + 10 W
75 ohm external terminal
S video input (4-pin mini DIN)
Video input (phono jack)
Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/PB/CB: 0.7 Vp-p, 75 ohms/PR/CR: 0.7 Vp-p, 75 ohms
Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
Video output (phono jack)
Audio output (phono jacks)
HDMI IN 1, 2, 3
PC IN
(RGB)
PC IN
Video: 1080/24p, 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack): 500 mVrms, Impedance: 47 kilohms (HDMI IN 3 only)
PC Input (D-sub 15-pin) (see page 32)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
Headphones jack
Power Consumption
Dimensions
(w × h × d)*
Indicated on the rear of the TV.
DIGITAL MEDIA PORT
110–240 V AC, 50/60 Hz
46
40
1,920 pixels (horizontal) × 1,080 lines (vertical)
1120 × 782 × 307
with stand (mm)
1120 × 742 × 115
without stand (mm)
29
Mass*
with stand (kg)
25
without stand (kg)
Optional Accessories Wall-Mount bracket SU-WL500 and SU-WL50B
SU-FL300M
TV stand
32
1,366 pixels (horizontal) × 768
lines (vertical)
986 × 684 × 279
794 × 577 × 242
986 × 646 × 110
794 × 540 × 99
22
16
19
13
Additional Information
Audio output (phono jacks)
i
DMPORT
Power and others
Power Requirements
Screen Size (inches)
Display Resolution
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
35 GB
KLV-46/40/32V400A
3-300-887-13(1)
Troubleshooting
If you find any problem while viewing your TV, you can either check the Troubleshooting guide below or
use the “Factory Settings” function (page 31). If the problem persists, contact your Sony dealer.
Check whether the 1 (standby) indicator is flashing in red.
When it is flashing
The self-diagnosis function is activated.
1 Count how many 1 (standby) indicator flashes between each two second break.
For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc.
2
Press 1 on the top edge of the TV to turn it off, disconnect the AC power cord, and inform your dealer
or Sony service centre of how the indicator flashes (number of flashes).
When it is not flashing
1 Check the items listed below.
2 If the problem still persists, have your TV serviced by qualified service personnel.
Problem
Cause/Remedy
No Picture
No picture (screen is dark) and
no sound
• Check the antenna/cable connection.
• Connect the TV to the AC power outlet, and press 1 on the top edge of the TV.
• If the 1 (standby) indicator lights up in red, press "/1.
No picture or no menu
information from equipment
connected to the video input
jack
• Press
/
to display the connected equipment list, then select the desired
input.
• Check the connection between the optional equipment and the TV.
Poor Picture
Only snow and noise appear
on the screen
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its serviceable life (three to five years in
normal use, one to two years at the seaside).
Distorted picture (dotted lines
or stripes)
• Keep the TV away from electrical noise sources such as cars, motorcycles, hairdryers or optional equipment.
• When installing optional equipment, leave some space between the optional
equipment and the TV.
• Check the antenna/cable connection.
• Keep the antenna cable away from other connecting cables.
• Broadcast signals are too strong. Set the “Signal Booster” to “Off” (page 34) or turn
off or disconnect the booster if it is in use.
Picture or sound noise when
viewing a TV channel
• Select “Manual Programme Preset” in the “Channel Set-up” menu and adjust
“AFT” (Automatic Fine Tuning) to obtain better picture reception (page 34).
• Select “Noise Reduction” in the “Picture” menu to reduce the noise in the picture
(page 26).
36 GB
KLV-46/40/32V400A
3-300-887-13(1)
Problem
Cause/Remedy
Good picture, but noisy sound
• The TV system setting is inappropriate.
• If the sound of all the channels are noisy, perform “Auto Tuning” in the “Channel
Set-up” menu to preset the channel again (page 33).
• If the sound of some channels is noisy, select the channel, then perform “Manual
Programme Preset” in the “Channel Set-up” menu, and select the appropriate TV
system (“TV System”) (page 34).
Some tiny black points and/or
bright points appear on the
screen
• The picture of a display unit is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
No colour on programmes
• Select “Reset” in the “Picture” menu to return to the factory settings (page 26).
No colour or irregular colour
when viewing a signal from the
Y, PB/CB, PR/CR jacks of
/
1 or 2
• Check the connection of the Y, PB/CB, PR/CR jacks of
/ 1 or 2.
• Make sure that the Y, PB/CB, PR/CR jacks of
/ 1 or 2 are firmly seated in their
respective jacks.
Picture flashes initially when
changing to HDMI mode or
switching on the TV with HDMI
mode
• This is probably caused by the authentication process between HDMI equipment
and the TV. It does not indicate a malfunction.
Sound
• Press 2 +/– or % (Mute).
• Check if the “Speaker” is set to “TV Speaker” from the “AV Set-up” menu in “Setup” menu (page 30).
Stereo broadcast sound
switches on and off, or is
distorted; the sound switches
between stereo and monaural
frequently
• The antenna connection is loose or the antenna cable is damaged. Check the cable
and connection on the TV, VCR, and on the wall (page 5).
• Adjust the antenna direction for the minimum interference. Contact a Sony dealer
for advice.
• Signal transmission is low. Try using a booster. Otherwise, use the fine tuning
(“AFT”) function (page 34).
General
The TV turns off automatically
(the TV enters standby mode)
• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On
Timer” (page 31).
The TV turns on automatically
• Check if the “On Timer” is activated (page 31).
Some input sources cannot be
selected
• Select “Video Labels” in the “AV Set-up” menu and cancel “Skip” of the input
source (page 29).
The remote does not function
• Replace the batteries.
The “Store Display Mode: On”
message appears on the
screen
• Select “Factory Settings” in the “Set-up” menu (page 31).
Additional Information
No sound, but good picture
Continued
37 GB
KLV-46/40/32V400A
3-300-887-13(1)
Problem
Cause/Remedy
The wide screen mode
changes spontaneously when
“Auto Wide” is “On”
• During a transition between two programmes, the TV detects the optimum wide
screen mode. During this period, an irregular wide screen mode may appear.
• The wide mode is switched automatically according to the revised signal with a
Wide ID signal.
• The “Auto Wide” feature stops working temporarily when you press
, and
resumes after a while. To fix in the manually selected wide screen mode, set “Auto
Wide” to “Off” in the “Screen” menu (page 28).
Text display is incomplete or
garbled
• Your area may not be able to receive Text. Text is displayed only in the area that is
covered by Text services.
• The antenna connection is loose or the antenna cable is damaged. Check the cable
and connection on the TV, VCR, and on the wall (page 5).
• Adjust the antenna direction. Contact a Sony dealer for advice.
• Signal transmission is too low. Try using a booster.
• Using the fine tuning (“AFT”) function may improve the picture (page 34).
Cannot play shooting games
• Some shooting games which involve pointing a light beam at the TV screen with an
electronic gun or rifle cannot be used with your TV. For details, see the instruction
manual supplied with the video game software.
The TV cabinet creaks
• Changes in room temperature sometimes make the TV cabinet expand or contract,
causing a noise. This does not indicate a malfunction.
Static discharge is felt when
touching the TV cabinet
• This is the same static discharge that is felt when touching metal door handles or
car doors especially when the air is dry, for example in winter. This does not
indicate a malfunction.
Weak signal (signal level
indicator displayed in red)
• Check the antenna/cable connection.
• Set the “Signal Booster” to “Auto” (page 34) or try using an external booster.
Sound does not match
pictures on the screen when
audio is output directly from
the amplifier system
• Adjust the sound delay settings from the connected equipment to minimize the time
gap between the audio and video output.
38 GB
KLV-46/40/32V400A
3-300-887-13(1)
Customer support
Printed in Malaysia
KLV-46/40/32V400A
3-300-887-13(1)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising