Sony ZS-S10CP Operating instructions

Sony ZS-S10CP Operating instructions
4-414-779-71(1)
Basic Operations
Listening to the radio
1 Press POWER .
2 Press RADIO BAND  repeatedly.
Personal Audio System
Each time you press the button, the radio band
toggles between AM and FM.
3 Hold down
Operating Instructions
使用说明书
*
©2012 Sony Corporation
Tip
Printed in China
If an FM broadcast is noisy, setting to monaural usually reduces the
noise.
1P
ress MODE .
“ST” or “Mono” appears.
2 While “ST” is displayed, press MODE  to display “Mono.”
ZS-S10CP
*
Changing the FM/AM tuning interval
If you need to change the FM/AM tuning interval,
proceed as follows:
* VOLUME +  and   have a tactile dot.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation
of the apparatus with newspapers, tablecloths,
curtains, etc. And do not place lighted candles on the
apparatus.
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not
place objects filled with liquids, such as vases, on the
apparatus.
As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible AC
outlet. Should you notice an abnormality in the unit,
disconnect the main plug from the AC outlet
immediately.
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the
like for a long time.
Before using the unit
To
Pause playback
The nameplate and important information concerning
safety are located on the bottom exterior.
To turn on/off the power
Press POWER .
Stop playback
Go to the next
track/MP3 file
Go back to the
previous track/
MP3 file
Select a folder on
an MP3 disc
Locate a point
while listening to
the sound
Locate a point
while observing
the display
Remove the CD
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital audio
material on the other side. However, since the audio
material side does not conform to the Compact Disc
(CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard. Recently,
various music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are
some that do not conform to the CD standard and may
not be playable by this product.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
/TUNE + or –  until the frequency
digits begin to change in the display.
The unit automatically scans the radio frequencies
and stops when it finds a clear station.
If you cannot tune in a station, press /TUNE + or –
 repeatedly to change the frequency step by
step.
When an FM stereo broadcast is received, “ST”
appears.
Note
When turning on the power, hold down POWER 
until OPR/BATT indicator  lights up.
To adjust the volume
Press VOLUME +, – .
To listen through headphones
Connect the headphones to the  (headphones) jack
 on the back of the unit.
Playing a CD/MP3 disc
1 Press POWER .
2 Press CD .
3 Press PUSH OPEN/CLOSE () , and place a disc
Press
 . To resume play, press it
again.
 .
 .
1 Press POWER .
2 Press RADIO BAND  to select the desired band.
3 Press MANUAL PRESET  to enter FM/AM manual
preset mode.
4 Hold down MODE  for 2 seconds until the preset
number flashes in the display.
The current step appears.
 .
/TUNE +  to go forward and
/TUNE –  to go backward.
 (forward) or  (backward)
 during playback and hold it
until you find the point.
 (forward) or  (backward)
 in pause and hold it until you
find the point then press  .
PUSH OPEN/CLOSE () .
5 Press PRESET + or –  to select “FM 50K” for 50 kHz
or “FM 100K” for 100 kHz interval, and “AM 9K” for
9 kHz or “AM 10K” for 10 kHz interval.
6 Press DISPLAY/ENTER .
After changing the tuning interval, you need to reset
your preset radio stations.
Tips
Playback starts from the track/MP3 file you last stopped playing
(Resume play). During stop, the track/MP3 file number to be
played is displayed.
To cancel the resume play (to start play from the beginning of
the first track/MP3 file), press   while the CD is stopped.
When you open the CD compartment, resume play is cancelled.
If the unit is turned off while the AC power cord is connected,
resume play will not be cancelled.
with the label side up on the CD compartment.
To close the CD compartment, press PUSH OPEN/
CLOSE () .
Example of folder structure and playing order
Power sources
The playing order of the folders and files is as follows:
Folder
MP3 file
To connect the AC power cord
Connect the AC power cord to the unit and the wall outlet.
To prepare the batteries
Insert six R14 (size C) batteries (not supplied) into the battery compartment.
Notes
Replace the batteries when the OPR/BATT indicator  dims, or when the unit stops operating.
Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.
To use the unit on batteries, disconnect the AC power cord from the unit.
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Number of channels
2
Frequency response
20 Hz - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
4 Press  .
The unit plays all the tracks/MP3 files once.
When you play an MP3 disc, the MP3 indicator lights
up after the unit has read the file information.
Specifications
CD player section
Label side facing up
Audio CD
Dimensions
Approx. 299 mm × 126 mm × 210 mm (w/h/d)
(incl. projecting parts)
Mass
Approx. 2.4 kg (incl. batteries)
Supplied accessories
AC power cord (1)
* Battery life is subject to changes in surrounding temperature, usage
conditions, manufacture and battery type.
After the track number is displayed, the playing
time* will appear.
MP3 disc
Design and specifications are subject to change without notice.
Optional accessory
Notes on MP3 discs
Sony MDR headphones series
When the disc is inserted, the unit reads all the files on that disc.
During this time, “READING” is displayed. If there are many
folders or non-MP3 files on the disc, it may take a long time for
play to begin or for the next MP3 file to start to play.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.
A folder that does not include an MP3 file is skipped.
Maximum number of files: 511
Maximum number of folders: 256 (including the root folder)
Maximum number of folders and files in total: 512
Maximum directory levels: 8
If you put the extension “.mp3” to a file other than an MP3 file,
the unit cannot recognize the file properly and will generate
random noise that could damage your speakers.
After the MP3 folder number and track number
are displayed, the playing time* will appear.
Radio section
Frequency range
FM: 87.5 MHz - 108 MHz (50 kHz/100 kHz step)
AM: 531 kHz - 1,602 kHz (9 kHz step)
530 kHz - 1,610 kHz (10 kHz step)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
* If the playing time is more than 100 minutes, “--:--” appears in
the display.
General
Speaker
Full range: 8 cm dia., 8 Ω, cone type (2)
Outputs
Headphones jack (stereo minijack):
For 16 Ω - 32 Ω impedance headphones
Input
AUDIO IN jack (stereo minijack)
Power output
1.0 W + 1.0 W (at 8 Ω, 10% harmonic distortion)
Power requirements
For CD radio:
230 V AC - 240 V AC, 50 Hz
9 V DC, 6 R14 (size C) batteries
Power consumption
AC 11 W
Battery life*
For CD radio:
FM reception
R14P: approx. 7 h
Sony alkaline LR14: approx. 30 h
CD playback
R14P: approx. 1.5 h
Sony alkaline LR14: approx. 13 h
4-414-779-71(1)
基本操作
听收音机
1 按 POWER 。
2 反复按本机上的 RADIO BAND 。
Personal Audio System
每按一次此按钮,收音机波段将在 AM 和 FM
之间切换。
3 按住本机上的
使用说明书
*
提示
如果 FM 广播嘈杂,一般可以将当前状态改为
单声道即可减少噪音。
1 按本机上的 MODE 。
出现“ST”或“MONO”。
2 显示“ST”时,按本机上的 MODE  显示
“MONO”。
©2012
索尼公司
中国印刷
Sony Corporation Printed in China
ZS-S10CP
*
若要
按
更改 FM/AM 调谐间隔
如果需要更改 FM/AM 调谐间隔,则继续以下操
作:
暂停播放
 。若要恢复播放,再按
1 按 POWER 。
* 本机上的 VOLUME +  和   有一个触觉点。
操作本系统之前,请仔细阅读本手册并妥善保
管以备将来参考。
请勿使电池(装上的电池组或电池)在过热环
境如阳光、⽕或类似条件下放置较长时间。
铭牌和安全注意事项位于本机底壳上。
警告
为防⽌⽕灾或触电,请不要让本机淋⾬或
受潮。
为了降低着⽕的危险,请不要⽤报纸、桌布、窗
帘等覆盖本机的通风孔。不要在本机上放置点
燃的蜡烛。
为了减⼩⽕灾或触电的危险,不要将此装置放
置于液体滴漏或飞溅的环境,也不要在其上放
置盛有液体的容器,⽐如花瓶等。
由于主插头⽤于将本机与主电源插座断开连接,
请将本机连接到易于插拔的交流电源插座上。如
果您注意到任何本机的异常,请⽴即将主插头
从交流电源插座上断开连接。
即使本机已关闭电源,只要其电源插头仍插在
电源插座中,本机就未与交流电源断开连接。
有关 DualDisc 的注意事项
DualDisc 是⼀种双⾯光盘产品,它⼀⾯含有符
合录制 DVD 的素材,另⼀⾯为数字⾳频素材。
但是,由于⾳频素材⼀⾯不符合 Compact Disc
(CD)标准,⽆法保证在本产品上播放。
⽤版权保护技术编码的⾳乐光盘
本产品被设计⽤于播放符合 Compact Disc(CD)
标准的光盘。近来,⼀些唱⽚公司在出售各种
⽤版权保护技术编码的⾳乐光盘。请注意,这
些光盘中有⼀些光盘不符合 CD 标准⽽可能⽆
法⽤本产品播放。
MPEG Layer-3 音频编码技术和专利由
Fraunhofer IIS 和 Thomson 授权。
使用本机前
打开 / 关闭电源
按 POWER 。
注
打开电源时,按住 POWER  直至 OPR/BATT
指示灯  点亮。
调节音量
按 VOLUME +,- 。
2 按 RADIO BAND  选择想要的波段。
 。
3 按 MANUAL PRESET  进入 FM/AM 手动预设模式。
进到下一曲目 /  。
MP3 文件
4 按住 MODE  2 秒钟,直至显示屏中预设编
号闪烁。
出现当前步幅。
返回上一曲目 /  。
MP3 文件
用耳机聆听
将耳机连接至本机背后的 (耳机)插孔 。
听歌曲时找到
某一点
在播放过程中按住 (向前)
或 (向后),直至找
到该点。
播放 CD/MP3 光盘
看着显示屏找
到某一点
在暂停中按住 (向前)或
直至找到该点,
(向后),
然后按  。
1 按 POWER 。
取出 CD
PUSH OPEN/CLOSE () 。
2 按本机上的 CD 。
后将光盘以标签面朝上放在 CD 舱内。
若要关闭 CD 舱,按本机上的 PUSH OPEN/
CLOSE () 。
提示
播放将从最后停止播放的曲目 /MP3 文件开始
(续播)。处于停止播放时,将显示要播放的曲
目 /MP3 文件编号。
若要取消续播(从第一首曲目 /MP3 文件的开
头播放),请在 CD 停止时按  。当您打开
CD 舱时,续播将被取消。如果在连接了交流
电源线时关闭本机,续播不会取消。
文件夹结构示例和播放顺序
文件夹和文件的播放顺序如下所示:
连接交流电源线
将交流电源线连接到本机电源壁插座。
准备电池
将六节 R14(尺寸 C)电池(未附送)插入电池舱中。
文件夹
MP3 文件
注
当 OPR/BATT 指⽰灯  暗淡时,或本机停⽌工作时,请更换电池。
请全部换成新电池。更换电池前,必须取出本机中的 CD。
若要本机使⽤电池,请断开本机交流电源线连接。
规格
⼀般
扬声器
全范围:直径 8 cm,8 ,圆锥形(2)
输出
⽿机插孔(⽴体声迷你插孔):
适合 16  - 32  阻抗⽿机
输⼊
AUDIO IN 插孔(⽴体声迷你插孔)
功率输出
1.0 W + 1.0 W(8  时 10% 谐波失真)
停止播放
本机上的
/TUNE +  前
进, /TUNE -  后退。
电源
收⾳机部分
频率范围
FM:87.5 MHz - 108 MHz(50 kHz/100 kHz
递增)
AM: 531 kHz - 1602 kHz(9 kHz 递增)
530 kHz - 1610 kHz(10 kHz 递增)
天线
FM: 伸缩天线
AM: 内置铁素体棒天线
一次。
选择 MP3 光盘
中一个文件夹
3 按本机上的 PUSH OPEN/CLOSE () ,然
请勿把本机安装在书橱或嵌⼊墙壁的机架等狭
窄空间内。
CD 播放机部分
系统
光盘数字⾳频系统
激光⼆极管属性
发射持续时间:连续
激光输出:低于 44.6 µW
(此输出是在距离光学拾取组件上的物镜表⾯
约 200 mm 处、光圈为 7 mm 的测量值。)
声道数量
2
频率响应
20 Hz - 20000 Hz +1/-2 dB
抖晃率
低于可测量限制
/TUNE + 或 - ,直至显
示屏中的频率数字开始变化。
本机自动扫描电台频率,当找到一个清晰电
台时停止扫描。
如果无法调入电台,反复按本机上的
/
TUNE + 或 -  逐级改变频率。
标签面朝上
4 按  。
本机一次播放所有曲目 /MP3 文件。
播放 MP3 光盘时,在本机读取了文件信息后,
MP3 指示灯亮起。
音频 CD
电源要求
对于 CD 收录机:
230 V AC - 240 V AC,50 Hz
9 V DC,6 R14(C 型)电池
功率消耗
AC 11 W
电池使⽤时间
对于 CD 收录机:
FM 接收
R14P:约 7 ⼩时
Sony 碱性 LR14:约 30 ⼩时
CD 播放
R14P:约 1.5 ⼩时
Sony 碱性 LR14:约 13 ⼩时
尺⼨
约 299 mm × 126 mm × 210 mm(宽 / ⾼ / 深)
(包括突出部位)
质量
约 2.4 kg(包括电池)
随机附件
交流电源线(1)
* 电
池使用时间随环境温度、使用情况、生产商
和电池类型改变。
设计及规格若有变更,恕不另⾏通知。
选购附件
Sony MDR ⽿机系列
在显示曲目编号后,
将会出现播放时间 *。
MP3 光盘
在显示 MP3 文件夹编号和曲目编号后,
将会出现播放时间 *。
*如果播放时间超过 100 分钟,显示屏中会出
现“--:--”。
MP3 光盘注意事项
插入光盘时,本机读取光盘中的所有文件。此
时,显示
“READING”。如果光盘中有许多文件夹或非
MP3 文件,则可能需要很长时间才能开始播放
或开始播放下一个 MP3 文件。
建议您不要将不需要的文件夹或非 MP3 文件
保存在用于进行 MP3 聆听的光盘中。
跳过不含 MP3 文件的文件夹。
文件最大数量:511
文件夹最大数量:256(包括根文件夹)
文件夹和文件最大数量:512
最大目录层级:8
如果将扩展名“mp3”添加到非 MP3 文件,本
机无法正确识别文件,并且将会产生可能损坏
您扬声器的噪声。
5 按 PRESET + 或 -  选择“FM 50K”作为
50 kHz 或选择
“FM 100K”
作为 100 kHz 间隔,
选择“AM 9K”作为 9 kHz 或选择“AM 10K”
作为 10 kHz 间隔。
6 按 DISPLAY/ENTER 。
更改调谐间隔后,需要重新设定预设电台。
Other Operations
Precautions
Using the display
You can check information about the CD using the
display.
Checking the information of an audio CD
To check the total track number and playing
time of the CD
After reading the CD, the total playing time will appear,
or press   twice to cancel Resume play.
Total playing time
Checking the information of an MP3 disc
To check the total folder/file number and total
file number on the CD
After reading the folder/file information, the total
folder number and the file number will appear, or press
  twice to cancel Resume play.
Playing tracks/MP3 files in random
order (Shuffle Play)
You can play tracks/MP3 files in random order.
1 Press POWER .
2 Press CD .
3 Press MODE  (press  , then press MODE 
during playback) until “SHUF” appears in the
display.
4
Press   to start Shuffle Play.
Stop playing first. Then press MODE  (press  ,
then press MODE  during playback) until “SHUF”
disappears from the display.
Note
You cannot change the play mode while a track/MP3 file is
playing or paused.
When you press MODE  during playback, “PUSH STOP”
appears in the display.
You can store radio stations into the unit’s memory.
You can preset up to 30 radio stations, 20 for FM and
10 for AM in any order.
1 Press POWER .
2 Press RADIO BAND  to select the band.
3 Hold down AUTO PRESET  for 2 seconds until
“AUTO” flashes in the display.
4 Press DISPLAY/ENTER .
The stations are stored in memory from the lower
frequencies to the higher ones.
Tips
During Shuffle Play, you cannot select the previous track/MP3 file
by pressing  .
The resume function does not work during Shuffle Play.
If a station cannot be preset automatically
You need to preset a station with a weak signal
manually.
1
2
3
4
Press POWER .
Press RADIO BAND  to select the band.
Tune in a station you want using
/TUNE + or – .
Press MANUAL PRESET .
The band selected (“FM-xx” or “AM-xx”) appears in
the display.
5 Press PRESET + or –  until the preset number you
Total folder
number
Total file
number
Creating your own program (Program
Play)
Playing tracks/MP3 files repeatedly
(Repeat Play)
You can play tracks/MP3 files repeatedly in normal and
program play modes.
1 Press POWER .
2 Press CD .
3 Proceed as follows, while CD/MP3 disc is not
playing.
To repeat
Do this
1 Press MODE  (press  , then
press MODE  during playback) until
“ 1” appears.
2 Press  or   to select the
track/MP3 file that you want to repeat.
3 Press  .
1 Press MODE  (press  , then
All tracks/
MP3 files
press MODE  during playback) until
on the CD
“ ” appears.
2 Press  .
A selected 1 Press MODE  (press  , then
folder (MP3
press MODE  during playback) until
disc only)
“ ” and “ ” appear.
2 Select the folder by pressing /TUNE
+ or – .
3 Press  .
Programmed 1 Program tracks/MP3 files (see
tracks/MP3
“Creating your own program”).
files
2 Press MODE  (press  , then
press MODE  during playback) until
“PGM” and “ ” appear.
3 Press  .
A single
track/MP3
file
Note
You can arrange the playing order of up to 20 tracks/
MP3 files on a CD.
1 Press POWER .
2 Press CD .
3 Press MODE  (press  , then press MODE 
during playback) until “PGM” appears in the display.
4 Press  or   to select the track.
For MP3 files, press /TUNE + or –  first and then
press  or  .
Track (File) number flashes in the display.
Audio CD
MP3 disc
5 Press DISPLAY/ENTER .
“P-xx” appears in the display.
Audio CD
MP3 disc
6 To program another song, repeat steps 4 and 5.
7 Press   to start Program Play.
You cannot change the play mode while a track/MP3 file is
playing or paused.
When you press MODE  during playback, “PUSH STOP”
appears in the display.
To cancel Program Play
To cancel Repeat Play
To check the order of tracks/MP3 files
Press MODE  (press  , then press MODE 
during playback) until “ ” disappears from the
display.
General
Discs that this unit CAN play
Presetting radio stations
To cancel Shuffle Play
Troubleshooting
want for the station flashes in the display.
6 Press DISPLAY/ENTER .
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Playing preset radio stations
1 Press POWER .
2 Press RADIO BAND  to select the band.
3 Press PRESET + or –  to tune in the stored station.
Connecting optional components
You can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit. Be sure to turn off the power of
each component before making any connections. For
details, refer to the instruction manual of the
component to be connected.
1 Connect the AUDIO IN jack  to the line output
jack of the portable digital music player or other
components using an audio connecting cable (not
supplied).
2 Press POWER  to turn the unit on.
3 Turn the connected component on.
4 Press AUDIO IN , and start playback on the
connected component.
The sound from the connected component is
output from the speakers of this unit.
To connect the unit to a TV or VCR, use an extension
cable (not supplied) with a stereo-mini jack on one
end and two phono plugs on the other end.
Audio CD
CD-R/CD-RW (CD-DA*/MP3 files)
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2 or Joliet
CD-R/CD-RW of poor recording quality, CD-R/CD-RW
that has scratches or is dirty, or CD-R/CD-RW
recorded with an incompatible recording device
CD-R/CD-RW which is finalized incorrectly
Before playing, clean the CD
with a cleaning cloth. Wipe the
CD from the center out. If there
is a scratch, dirt or fingerprints
on the CD, it may cause tracking
error.
There is no audio.
Unplug the headphones when listening through
speakers.
Noise is heard.
CD/MP3 player
Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
Do not stick paper or a sticker on the CD, or scratch
the surface of the CD.
After playing, store the CD in its case.
On safety
As the laser beam used in the CD player section is
harmful to the eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel
only.
Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do
so may damage the unit. Do not use such discs.
The CD does not play or “noDISC” is displayed
even when a CD is in place.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
The CD-R/CD-RW is blank.
There is a problem with the quality of the CD-R/
CD‑RW, recording device or application software.
Replace all the batteries with new ones if they are
weak.
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged.
Place the unit in a location free from vibration.
Clean the lens with a commercially available blower.
The sound may drop out or noise may be heard
when using a poor quality CD-R/CD-RW or if there is
a problem with the recording device or application
software.
On power sources
Starting playback takes more time than usual.
For AC operation, use the supplied AC power cord;
do not use any other type.
Unplug the unit from the wall outlet when it is not
be used for an extended period of time.
If the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage
or corrosion.
The following discs take a longer time to start
playback.
–a disc recorded with a complicated tree structure.
–a disc that has not been finalized (a disc to which
data can be added).
–a disc that has many folders or non-MP3 files.
Radio
On placement
Do not leave the unit in a location near heat sources,
in a place subject to direct sunlight, excessive dust or
mechanical shock, or in a car subject to the direct
rays of the sun.
Do not place the unit on an inclined or unstable
place.
Do not place anything within 10 mm of the side of
the cabinet. The ventilation holes must be
unobstructed for the unit to operate properly and
prolong the life of its components.
Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or
spring-wound watches away from the unit to
prevent possible damage from the magnet.
If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player
section. Should this occur, the unit will not operate
properly. In this case, remove the CD and wait about
an hour for the moisture to evaporate.
The design of the carrying handle prohibits you from
lifting it forcibly while the CD compartment is open.
Press DISPLAY/ENTER  (press  , then press
DISPLAY/ENTER  during playback).
The last programmed step number appears in the
display. After a few seconds, the last programmed
track/folder number appears in the display.
Connect the AC power cord to the wall outlet
securely.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if they are
weak.
Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
 Move the portable telephone, etc., away from the
unit.
Notes on discs
On operation
Stop playback first. Then press MODE  until “PGM”
disappears from the display.
The power does not turn on.
Reception is poor.
Reorient the
antenna to
improve FM
reception.
Reorient the unit
itself to improve
AM reception.
The audio is weak or is poor quality.
Replace all the batteries with new ones if they are
weak.
Move the unit away from the TV.
If you are using the remote while listening to AM
radio, noise may be heard.
The TV picture becomes unstable.
To change the current program
If you are listening to an FM program near the TV
with an indoor antenna, move the unit away from
the TV.
Press   once if the CD is stopped and twice if the
CD is playing. The current program will be erased. Then
create a new program following the programming
procedure.
Tips
If you try to program 21 tracks/MP3 files or more, “FULL” will
appear in the display.
You can play the same program again, since the program is saved
until you open the CD compartment.
The resume function does not work during Program Play.
Carrying handle
After trying the remedies, if you still have problems,
unplug the AC power cord or remove all the batteries.
After all the indications in the display disappear, plug
the AC power cord back in, or insert the batteries
again. If the problem persists, please consult your
nearest Sony dealer.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
benzine.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
其他操作
注意事项
随机播放曲目 /MP3 文件
使用显示屏
可以使用显示屏查看 CD 的信息。
查看音频 CD 的信息
(随机播放)
可以随机播放曲目 /MP3 文件。
查看 CD 的总曲目数和播放时间
在读取 CD 后,会出现总曲目数和总播放时间,
或按两次   取消续播。
总播放时间
查看 MP3 光盘的信息
查看 CD 上的总文件夹数和总文件数
在读取文件 / 文件夹信息后,会出现总文件夹
数和总文件数,或按两次   取消续播。
总文件数 总文件夹数
重复播放曲目 /MP3 文件
(重复播放)
可以以正常和程序播放模式来重复播放曲目 /
MP3 文件。
1 按 POWER 。
1 按 POWER 。
2 按 CD 。
3 按 MODE (在播放过程中按  ,然后
按 MODE ),直至显示屏中出现
“SHUF”。
预设广播电台
电台可以储存在本机的内存中。最多可以任何
顺序预设 30 个电台,20 个 FM 电台,10 个
AM 电台。
1 按 POWER 。
2 按 RADIO BAND  选择波段。
3 按住 AUTO PRESET  2 秒钟,直至显示屏
中“AUTO”闪烁。
4 按   开始随机播放。
4 按 DISPLAY/ENTER 。
取消随机播放
首先停止播放。然后按 MODE (在播放过程
中按  ,然后按 MODE ),直至“SHUF”
从显示屏中消失。
如果无法自动预设某一电台
需要手动预设信号较弱的电台。
注意
当曲目 /MP3 文件正在播放或暂停时,无法改
变播放模式。
在播放过程中按 MODE  时,显示屏上会出
现“PUSH STOP”。
提示
在随机播放过程中,无法按   来选择
前一首曲目 /MP3 文件。
在随机播放过程中,续播功能无效。
电台按从低到高的频率顺序储存在内存中。
1 按 POWER 。
2 按 RADIO BAND  选择波段。
3 使用
/TUNE + 或 -  调入想要的电台。
4 按 MANUAL PRESET 。
所选波段(“FM-xx”或“AM-xx”)会出现在
显示屏中。
5 按 PRESET + 或 - ,直至显示屏中想要电
台的预设号码闪烁。
6 按 DISPLAY/ENTER 。
新的电台将替换原有的电台。
建立自己的程序(程序播放)
提示
即使拔掉交流电源线或取出了电池,预设电台
也将保留在内存中。
2 按 CD 。
最多可以对 CD 上的 20 首曲目 /MP3 文件编排
播放顺序。
3 当不播放 CD/MP3 光盘时,按如下方式操作。
1 按 POWER 。
若要重复 操作
播放
2 按 CD 。
播放预设广播电台
3 按 MODE (在播放过程中按  ,然后
1 按 POWER 。
单首曲目 1按 MODE (在播放过程中按 
/MP3 文件
,然后按 MODE ),直至出
现“ 1”。
2按  或   选择想要重
复播放的曲目 /MP3 文件。
3按  。
CD 上的所 1按 MODE (在播放过程中按 
有曲目 /
,然后按 MODE ),直至出
MP3 文件
现“ ”。
2按  。
所选文件 1按 MODE (在播放过程中按 
夹(仅
,然后按 MODE ),直至出
MP3 光盘) 现“ ”和“ ”。
2按
/TUNE + 或 -  选择文件
夹。
3按  。
编入的曲
目 /MP3
文件
1编程曲目 /MP3 文件(请参阅“建
立自己的程序”)。
2按 MODE (在播放过程中按 
,然后按 MODE ),直至出
现“PGM”和“ ”。
3按  。
注意
当曲目 /MP3 文件正在播放或暂停时,无法改
变播放模式。
在播放过程中按 MODE  时,显示屏上会出
现“PUSH STOP”。
取消重复播放
按 MODE (在播放过程中按  ,然后按
MODE ),直至“ ”从显示屏中消失。
按 MODE ),直至显示屏中出现“PGM”。
4 按  或   选择曲目。
对于 MP3 文件,首先按
/TUNE + 或 – ,
然后按  或  。
在显示屏中曲目(文件)编号会闪烁。
音频 CD
MP3 光盘
2 按 RADIO BAND  选择波段。
3 按 PRESET + 或 -  调入所储存的电台。
连接选购装置
通过本机的扬声器,可以欣赏到来⾃便携式数
字⾳乐播放器等选购装置的⾳乐。连接前必须
先关闭每个装置的电源。详细说明,请参阅要
连接装置的使⽤说明书。
1 使⽤⾳频连接线(不附带)将 AUDIO IN 插
孔  连接⾄便携式数字⾳乐播放器或其他
装置的线路输出插孔。
2 按 POWER  打开本机。
5 按 DISPLAY/ENTER 。
“STEP xx”会出现在显示屏中。
音频 CD
MP3 光盘
6 若要程序播放其它歌曲,请重复步骤 4 和 5。
7 按   开始程序播放。
取消程序播放
首先停止播放。然后按 MODE ,直至“PGM”
从显示屏中消失。
3 打开所连接的装置。
4 按 AUDIO IN ,在所连接的装置上开始播放。
来⾃所连接装置的声⾳从本机的扬声器输出。
若要将本机连接⾄电视机或录像机,请使⽤
⼀端是⽴体声迷你插孔、另⼀端是两个⾳频
插头的延长线(不附带)。
故障检修
本机可以播放的光盘
⾳频 CD
CD-R/CD-RW(CD-DA*/MP3 文件)
*CD-DA 是 Compact Disc Digital Audio 的缩
写。这是适合⾳频 CD 的录制标准。
本机⽆法播放的光盘
以符合 ISO9660 Level 1/Level 2 或 Joliet
音乐 CD 格式或 MP3 格式以外录制的 CD-R/
CD-RW
录制质量很差的 CD-R/CD-RW,有刮痕或弄脏
的 CD-R/CD-RW,⽤不兼容的录制设备录制的
CD-R/CD-RW
未正确最终化的 CD-R/CD-RW
提示
如果试图编入超过 21 首曲目 /MP3 文件,显
示屏中将会出现“FULL”。
程序将保存到打开 CD 舱为止,因此可以再次
播放同一个程序。
在程序播放过程中,续播功能无效。
电源⽆法打开。
将交流电源线牢固连接⾄电源插座。
确认电池安装正确。
如果电池电量不⾜,请更换所有电池。
没有声⾳。
⽤扬声器听⾳乐时请拔掉⽿机插头。
听到噪⾳。
有⼈正在本机旁使⽤⼿提电话或其他会发出电
波的设备。
 将⼿提电话等设备远离本机。
CD/MP3 播放机
光盘注意事项
播放前,请⽤清洁的布清洁
CD。从 CD 的中⼼向外擦拭。
如果 CD 上有刮痕、弄脏或
⼿指印,则可能发⽣读轨错
误。
切勿使⽤汽油、稀释剂、市售的清洁剂或⽤于
树脂密纹唱⽚的防静电喷雾剂等溶剂。
切勿将 CD 暴露在直射阳光或热⽓管道等热源
下,也不要将其遗留在停在直射阳光下的车内,
因为车内温度会很⾼。
切勿将纸张或贴纸粘贴在 CD 上,也不要刮伤
CD 的表⾯。
播放后,请将 CD 存放在盒⼦内。
关于安全
由于 CD 播放机内使⽤的激光束对眼睛有伤
害,因此切勿拆下外壳。只能由专业⼈员进⾏
维修。
⼀旦有任何固体物或液体进⼊本机,请拔掉本
机电源插头,并由专业⼈员检查后⽅可继续使
⽤。
本机不能播放⾮标准形状的光盘(例如⼼形、
正⽅形、星形)。否则可能会损坏本机。切勿
使⽤此类光盘。
关于电源
对于交流电源操作,请使⽤附带的交流电源线;
切勿使⽤任何其他类型的电源线。
本机如果准备长期不使⽤,请从电源插座中拔
掉本机的电源插头。
电池不使⽤时,请取出电池,以免电池漏液或
腐蚀⽽造成损坏。
关于放置
切勿将本机放在热源附近、受阳光直射的地⽅、
灰尘很⼤或受到机械振动的地⽅、或受到太阳
直射的车内。
切勿将本机放置在倾斜或不稳定的地⽅。
切勿将任何物品放置在外壳侧⾯ 10 mm 范围
内。本机的通风孔必须通畅才能正常操作,并
能延长组件的使⽤寿命。
由于扬声器使⽤了强磁铁,因此请将使⽤磁性
编码的个⼈信⽤卡或弹簧发条⼿表远离本机放
置,以防⽌因磁铁⽽损坏。
关于操作
如果将本机从寒冷的地⽅直接带到温暖的场
所,或将其放置在⾮常潮湿的室内,则 CD 播
放机部分的内部镜头上可能会造成湿⽓凝结。
⼀旦发⽣此情况,本机将⽆法正常操作。在此
情况下,请取出 CD 并等待约 1 ⼩时使湿⽓
挥发。
当 CD 舱处于打开状态时,手提把手的设计可
防止强行将其抬起。
查看曲目 /MP3 文件的顺序
按 DISPLAY/ENTER (在播放过程中按  ,
然后按 DISPLAY/ENTER )。
显示屏中显示最后一个编排的步骤编号。数秒
后,显示屏中将显示最后一个编排的曲目 / 文
件夹编号。
更改当前程序
如果 CD 处于停止状态,按一次  ,如果
CD 正在播放,则按两次。当前程序将被删除。
然后按照编程操作步骤建立新的程序。
⼀般
手提把手
清洁外壳
将软布⽤中性清洁剂稍稍沾湿清洁外壳、⾯板
和控制键。切勿使⽤任何类型的研磨垫、洗涤
粉或酒精、汽油等溶剂。
如果您对本机有任何问题,请与附近的 Sony 经
销商联系。
即使放⼊了 CD,CD 也不播放或显⽰“noDISC”。
将 CD 以标签⾯向上放⼊。
清洁 CD。
取出 CD,并将 CD 舱保持打开约 1 ⼩时,使
其内部⼲燥。
CD-R/CD-RW 是空⽩的。
CD-R/CD-RW、录制设备或应⽤软件有质量问题。
如果电池电量不⾜,请更换所有电池。
有掉⾳。
降低⾳量。
清洁 CD,如果 CD 损坏严重,请换⼀张。
将本机放置在没有振动的地⽅。
⽤市售的吹⽓⼯具清洁镜头。
使⽤质量低劣的 CD-R/CD-RW、或录制设备、
应⽤软件有问题,则可能发⽣掉⾳或听到噪⾳。
比平常花费更长时间才能开始播放。
下列光盘需要很长时间才能开始播放。
-以复杂树形结构录制的光盘。
-未最终化的光盘(可以添加数据的光盘)。
-有许多文件夹或非 MP3 文件的光盘。
收⾳机
接收不良。
重新调整天线
⽅向,提⾼ FM
接收质量。
重新调整本机
⾃⾝⽅向,提
⾼ AM 接收质
量。
声⾳微弱或⾳质差。
如果电池电量不⾜,请更换所有电池。
将本机远离电视机。
收听 AM 收音机过程中,如果使用遥控器,则
可能会听见噪音。
电视机图像不稳定。
如果在使⽤室内天线的电视机旁收听 FM 节
⽬,请将本机远离电视机放置。
尝试解决⽅法后如果问题仍然存在,请拔掉交
流电源线插头或取出所有电池。显⽰屏中所有
指⽰消失后,重新插⼊交流电源线插头或插⼊
电池。如果问题仍然存在,请联络附近的 Sony
经销商。
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement