PrinterSetting User's Maunal

Printer setting tool
Contents
1 Communication port.................................................................................................................... 1
2 select module............................................................................................................................... 1
2.1 base ................................................................................................................................... 1
2.2 Ethernet ............................................................................................................................. 3
2.3 WIFI ................................................................................................................................... 3
2.5 Bluetooth ........................................................................................................................... 4
2.6 Black label......................................................................................................................... 5
2.7 Download .......................................................................................................................... 5
2.8 Hardware........................................................................................................................... 6
1 Communication port
Communication port: driver, serial port, network port, USB、parallel port;
Driver:click on the drop box shows all installed printers.
Serial port: point drop box shows all COM ports that have been assigned to the device.
Network port: click on the right side bottom of the search, can detect the printer
connected to all printers IP host through the network port, appears in the drop-down box .
USB: click the drop-down box to shows all the printers that are connected via the USB
printer.
Parallel port: click the drop-down box shows all the equipment has been assigned the
LPT parallel port .
NOTE: Below will prompt the currently selected port, click on the button of Check Port
will command the printer to print a string of text,please check printer output to deter
mine is OK.After OK,enter para setting.
2 select module
2.1 base
1
Language :
CP437 [USA,standard Europe ]
KataKana
CP850 [Multi-languege]
CP860 [Portuguese]
CP863 [Canadian-French]
CP865 [Nordic ]
WCP1251 [Cyrillic]
CP866 Cyrilliec #2
MIK[Cyrillic/Bulgarian]
CP755 [East Europe,Latvian
2]
Iran
Reserve
Reserve
CP852 [Latina 2]
CP858 [Multilingual
Latin I +Europe]
ISO-8859-2[Latin2]
ISO-8859-3[Latin3]
IranⅡ
Latvian
CP864 [Arabic]
ISO-8859-1 [West
Europe]
CP737 [Greek]
WCP1257 [Baltic]
Thai
CP720[Arabic]
ISO-8859-4[Baltic]
ISO-8859-5[Cyrillic]
ISO-8859-6[Arabic]
ISO-8859-7[Greek]
ISO-8859-8[Hebrew]
ISO-8859-9[Turkish]
ISO-8859-15[Latin 9]
Thai 2
CP855
CP856
CP857[Turkish]
Cp874
WCP1250[Central
Europe]
Reserve
CP775
GBK2312
Reserve
WCP1254[Turkish]
UTF-8
CP862 [Hebrew]
WCP1255[Hebrew]
SHIFT-JIS(Japanese)
WCP1256[Arabic]
EUC-KR (Korean)
WCP1252 [Latin 1]
WCP1253 [Greek]
WCP1258[Vietnam]
Baud rate : 4800;9600;19200;38400;57600;115200;1200(The corresponding selection according
to the self testing page )
Verify:NONE;ODD;EVEN
Font:FONT-A/FONT-B
Density :Normal/Dark
2
Line code:48/40 (Bytes)
The last one will automatically print:when out of paper, printer automatic reprint the last one.
NOTE: Set common properties of the printer,dial the code switch model,will be subject to dial the
code switch settings.
2.2 Ethernet
Ethernet to modify the corresponding parameters according to requirements.
NOTE: If you do not know the MAC address,please do not arbitrarily set this property,otherwise
could force through the network printer for printing.
2.3 WIFI
3
WiFi module PCB of the printer, according to the router set the wireless mode to click on the
corresponding model, and fill in the network name, key password, authentication type,
encryption algorithm.
Set wireless IP
NOTE: Set up WIFI printer’s wireless connection parameters,the settings should be consistent
with the parameters of the wireless router.
2.5 Bluetooth
After set,print a self-test page to check the setting determine is OK.
4
2.6 Black label
NOTE:
Enable the black label pattern and disable the black label pattern are both settings take
effect the need to restart the printer.
The button of test cut and test print can adjust the cutting and printing position, find a
suitable location to set.
2.7 Download
Update the printer firmware
5
1.Select the file
2.Update(please don’t change the firmware if not necessary)
Add LOGO
1.Add the logo file
2.Download
2.8 Hardware
For example:As the picture show ,setting cutter available.
Click on the settings, the left bottom display status! Is successful, and the printer will print a
short set of content; or Failed.
Select settings according to requirements.
6
Download PDF

advertising