Samsung | WD-J1255 | Samsung WD-J1255 User Manual

Washing Machine
Owner’s Instructions
WD-J1255(V/S/C)
WD-B1255(V/S/C)
Register your product at
www.samsung.com/global/register
Code No.: DC68-01997M_EN
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:25
WD-J1255-01997M_EN.indd
2
2006-06-09
ソタタ・11:57:26
Features
1.
Child Lock
2.
Large Loads Program
3.
Delay Start
4.
Quick Wash
5.
Delicates & Wool Program
The Child Lock function keeps curious little hands out of the washer. This safety feature ensures,
that children do not toy with the operation of the washer. It also alerts you when it is activated.
This program can wash bigger laundry items with 4 innovations.
(Skin Care System / Tangle Reducing System / Crease Release System / Deep Cleaning System)
This function enables uses to delay the washing machine’s starting time for up to 24 hours.
No time to loose! Less than 30minutes wash will give you time to run out before it’s too late. Our
28minute Quick Wash program can be the solution to your busy life. Now you can wash your
favorite clothes in only 28minutes, guaranteed!
Special care can be determined by the appropriate temperature, the gentle wash action and the
appropriate amount of water.
SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
3
2006-06-09
ソタタ・11:57:26
Safety Precautions
Congratulations on your purchase of this Samsung washing machine. These Owner’s Instructions
contain valuable information on the installation, use, and care of this appliance. Please take the time to
read these instructions so that you can take full advantage of the washing machine’s features and enjoy
this appliance for many years to come.
Before using the appliance
•
•
•
•
•
Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.
The appliance is designed for home use only.
Make sure that water and electrical connections are made by qualified technicians, observing the
manufacturer’s instructions (see “Installing the Washing Machine”) and local safety regulations.
All packaging and shipping bolts must be removed before the appliance is used. Serious damage
may occur if they are not removed. See “Removing the shipping bolts”.
Before washing clothes for the first time, you must run a complete cycle without clothes.
See “Washing for the first time”.
Safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set
the (On/Off) button to Off.
Make sure that the pockets of all clothing to be washed are empty. Hard, sharp objects, such as
coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.
Always unplug the appliance and turn off the water after use.
Before you open the door of the appliance, check that the water has drained. Do not open the door
if you can still see water.
Pets and small children may climb into the appliance. Check the appliance before each use.
The glass door becomes very hot during the washing cycle. Keep children away from the appliance
while it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified
persons may cause injury and/or make more serious repairs to the appliance necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
This appliance should only be serviced by an authorized service center, and only genuine spare
parts should be used.
This appliance is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the appliance.
If this appliance is supplied from a cord extension set or an electrical portable outlet device, the
cord extension set or electrical portable outlet device must be positioned so that it is not subject to
splashing or ingress of moisture. Additionally, the cord extension set or electrical portable out let
device must be of a current rating suitable for the appliance.
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
Do not use processed water containing oil, cream or lotion, which is usually found in skin-care
shops or massage clinics.
- Otherwise this will cause the packing to be deformed, which causes a malfunction or water
leak.
A stainless washing tube does not usually rust. However if some metal such as a hair pin is left in
the tube for an extended time, the tube could rust.
- Do not leave water or bleach containing chlorine in the tube for an extended period of time.
- Do not regularly use or leave water containing iron in the tube for an extended period of time.
If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to the surface
and use a sponge or soft cloth to clean it. (Under no circumstances use a metal brush)
For washing machines with ventilation openings in the base, that a carpet must not obstruct the
openings.
Use the new hose-sets and old hose-sets should not be reused.
4SAVE
SAMSUNG
Washing Machine Owner’s Instructions
THESE INSTRUCTIONS
WD-J1255-01997M_EN.indd
4
2006-06-09
ソタタ・11:57:26
Table of Contents
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inside cover
Installing the Washing Machine. . . . . . . . . . .
Unpacking the washing machine . . . . . . . . .
Overview of the washing machine . . . . . . . .
Selecting a location. . . . . . . . . . . . . . . . . . .
Adjusting the leveling feet . . . . . . . . . . . . . .
Removing the shipping bolts . . . . . . . . . . . .
Connecting the water supply hose . . . . . . . .
Connecting the water supply hose (Option) . .
Positioning the drain hose . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
................
.................
.................
.................
.................
.................
.................
.................
.................
.
.
.
.
.
.
.
.
.
............
.............
.............
.............
.............
.............
.............
.............
.............
A-1
A-1
A-1
A-2
A-2
A-2
A-3
A-4
A-4
Washing a Load of Laundry . . . . . . . . . . . . .
Washing for the first time. . . . . . . . . . . . . . .
Putting detergent in the washing machine . .
Overview of the control panel . . . . . . . . . . .
Washing clothes using Fuzzy Logic . . . . . . . .
Washing clothes manually . . . . . . . . . . . . . .
Using delay start. . . . . . . . . . . . . . . . . . . . .
Washing tips and hints . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
................
.................
.................
.................
.................
.................
.................
.................
.
.
.
.
.
.
.
.
. . . . . . . . . . . . .B-1
. . . . . . . . . . . . . .B-1
. . . . . . . . . . . . . .B-1
. . . . . . . . . . . . . .B-2
. . . . . . . . . . . . . .B-4
. . . . . . . . . . . . . .B-5
. . . . . . . . . . . . . .B-5
. . . . . . . . . . . . . .B-6
Maintaining the Washing Machine . . . . . . . . . . . . . . . . . . . . . . . . .
Draining the washing machine in an emergency . . . . . . . . . . . . . . . .
Repairing a frozen washing machine. . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the detergent drawer and recess . . . . . . . . . . . . . . . . . . . . .
Cleaning the debris filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the water hose mesh filter . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
. . . . . . . . . . . . .C-1
. . . . . . . . . . . . . .C-1
. . . . . . . . . . . . . .C-1
. . . . . . . . . . . . . .C-1
. . . . . . . . . . . . . .C-2
. . . . . . . . . . . . . .C-2
. . . . . . . . . . . . . .C-3
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
Problems and solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
Understanding error messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . .
Fabric care chart . . . . . . . . . . . . . . . . . . . . .
Electrical warnings . . . . . . . . . . . . . . . . . . .
Protecting the environment. . . . . . . . . . . . .
Declaration of conformity . . . . . . . . . . . . . .
Specification . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
................
.................
.................
.................
.................
.................
.
.
.
.
.
.
. . . . . . . . . . . . .E-1
. . . . . . . . . . . . . .E-1
. . . . . . . . . . . . . .E-1
. . . . . . . . . . . . . .E-2
. . . . . . . . . . . . . .E-2
. . . . . . . . . . . . . .E-2
24
WD-J1255-01997M_EN.indd
5
2006-06-09
ソタタ・11:57:27
Installing the Washing Machine
Unpacking the washing machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have
received all of the items shown below. If the washing machine was damaged during shipping or you do
not have all of the items, contact your Samsung dealer immediately.
Overview of the washing machine
Worktop
Drain Hose
Control panel
Plug
Base cover
Adjustable feet
Debris filter
Door release
Emergency drain tube
Filter Cover
Cold Water Supply Hose
Wrench
Drain hose
Bolt hole covers
Hose guide
A-1 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:29
Installing the Washing Machine
Selecting a location
Before you install the washing machine, select a location with the following characteristics:
• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)
• Away from direct sunlight.
• Adequate ventilation
• Room temperature that will not fall below 0 ˚C
• Away from sources of heat such as coal or gas
Make sure that the washing machine does not stand on its power cord.
Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Adjusting the leveling feet
If the floor is uneven, adjust the feet (do not insert pieces
of wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until
it is at the desired height.
2. Tighten the locking nut by turning it with the
supplied wrench.
If the washer is placed on an uneven or weak surface, noise
or vibration occurs.
(Only l degree angle is allowed.)
loose
Removing the shipping bolts
Before using the washing machine, you must remove the
five shipping bolts from the back of the unit. To remove
the bolts:
1. Loosen all bolts with the supplied wrench before
removing them.
2. Take each bolt head and pull it through the wide part
of the hole.
Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
SAMSUNG Washing Machine Owner’s Instructions A-2
WD-J1255-01997M_EN.indd
2
2006-06-09
ソタタ・11:57:29
Installing the Washing Machine
Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet
at the other. Do not stretch the water supply hose. If the hose is too short replace the hose with a longer,
high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply
intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink’s cold water faucet and tighten
it by hand. If necessary, you can reposition the water supply hose at the washing machine end by
loosening the fitting,rotating the hose, and retightening the fitting.
Option
Hot water
supply value
Option:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot water
supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water faucet and tighten it
by hand.
3. Use a Y-piece if you only want to use cold water.
A-3 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
3
2006-06-09
ソタタ・11:57:30
Installing the Washing Machine
Connecting the water supply hose (Option)
1. Remove the adaptor from the
water supply hose.
c
5. Connect the other end of the
water supply hose to the inlet
water valve at the rear of the
washer. Screw the hose clockwise
all the way in.
2. First, using a ‘+’ type screw driver,
loosen the four screws on the
adaptor. Next, take the adaptor
and turn part(b) following the
arrow until there is a 5mm gap.
3. Connect adaptor to the water tap
by tightening the screws firmly.
Then, turn part (b) following the
arrow and put(a) and (b) together.
NOTICE
4. Connect the water supply hose to
the adaptor. Pull down part (c) of
the water supply hose.
When you release part (c) the
hose automatically connects to
the adaptor making a ‘click’ sound.
a
b
After completing connection, if water leaks from the hose, then repeat the same steps. Use
the most conventional type of faucet for water supply. In case the faucet is square or too big,
remove the spacing ring before inserting the faucet into the adaptor.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
Over the edge of a wash basin.
The drain hose must be placed at a height of between
60 and 90 cm. To keep the drain hose spout bent, use
the supplied plastic hose guide. Secure the guide to
the wall with a hook or to the faucet with a piece of
string to prevent the drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above
the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no
longer than 90 cm.
SAMSUNG Washing Machine Owner’s Instructions A-4
WD-J1255-01997M_EN.indd
4
2006-06-09
ソタタ・11:57:33
Washing a Load of Laundry
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the (On/Off) button.
2. Pour a little detergent into compartment ( ) in the
detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40 ˚C is
displayed.
5. Press the Start/Pause button.
• This will remove any water from the manufacturer’s
test run remaining in the machine.
Dispenser
Dispenser
:
:
Dispenser
:
Detergent for prewash or starch.
Detergent for main wash, water softener,pre-soaking agent, bleach and stain removal
product.
Additives,e.g.fabric softener or former (fill no higher than lower edge of insert “ A”)
Putting detergent in the washing machine
1.
2.
3.
4.
Pull out the detergent drawer.
Add laundry detergent into compartment ( ).
Add softener into compartment ( ) (if you desire).
Add prewash detergent into compartment ( ) (if you desire).
Caution :
Concentrated or thick fabric softener and conditioner must
be diluted with a little water before being poured into the
dispenser (prevents the overflow from becoming blocked.
B-1 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:35
Washing a Load of Laundry
Overview of the control panel
A
 This is a general manual. The INLAY system may be different from that of the product you
purchased. For ( � ), see item 5 below to select the right specifications that match your product.
1.
Digital graphic display
2.
Prewash selection button
3.
Temperature selection button
4.
Rinse selection button
5.
Spin selection button
Displays the remaining wash cycle time,all of washing information and error messages.
Press the button to select prewash.
Press the button repeatedly to cycle through the available water temperature options
(cold water( ), 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.
Press the button repeatedly to cycle through the available spin speed options.
WD-J1255/WD-B1255
,
, 400, 800, 1000, 1200 rpm
: no spin
: Rinse Hold
No spin
The laundry remains in the drum without being spun after the final drain
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either “Drain” or the “Spin” program must be run.
6.
Delay Start selection button
7.
Dry selection button
Press the button repeatedly to cycle through the available delayed start options (from 5 hour to 24
hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
Press the button repeatedly to cycle through the available dry selections.
(120min.  90min.  60min.  30min.)
SAMSUNG Washing Machine Owner’s Instructions B-2
WD-J1255-01997M_EN.indd
2
2006-06-09
ソタタ・11:57:37
Washing a Load of Laundry
8.
Crease Release selection button
9.
Child Lock selection button
Select this function to reduce the crease of clothes. The whole washing process will be prolonged
by 10 minutes.
This is a button for preventing children from manipulating the washing machine.
On/Off - To set the program on: Press the Start/Pause button to turn on the washing machine.
Press and hold down the [Rinse] + [Spin] button for 2-3 seconds. It can only be activated when the
machine is turned on. Once you set the Child Lock on while in washing, no button is activated until
you set if off. Even the POWER button will not be activated. The Child Lock lamp lights on. To set the
program off: Press and hold down the [Rinse] + [Spin] button again for 2-3 seconds, then the lamp
lights off and is set off.
NOTE : Check out the Child Lock button first when no button is activated while the washing
machine is working.
10. Fuzzy Control dial
Turn the dial to select one of the 12 available wash programs
Standard, Stains, Quick, Wool, Half Load, Big Wash, Clean Tub, Air Wash (Deodorization,
Sterilization), Dry, Rinse, Rinse+Spin, Spin, Drain
11. Start/Pause selection button
Press to pause and restart programs.
12.
(On/Off) selection button
Press once to turn the washing machine on, press again to turn the washing machine off. If the
washing machine power is left on for longer than 10 minutes without any buttons being touched,
the power automatically turns off.
B-3 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
3
2006-06-09
ソタタ・11:57:38
Washing a Load of Laundry
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Logic” automatic
control system. When you select a wash programme, the machine will set the correct temperature,
washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1. Turn on your sink’s water faucet.
2. Press the (On/Off) button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Add the detergent, softener, and prewash detergent (if necessary) into the appropriate
compartment.
7. Turn the Fuzzy Control dial to select the
appropriate program for the type of clothes
Standard, Stains, Quick, Wool, Half Load, Big
Wash, Clean Tub, Air Wash(Deodorization,
Sterilization), Dry, Rinse, Rinse+Spin, Spin,
Drain.
You will see the indicators light up on the
control panel.
8. At this time, you can control the wash temperature, rinsing times, spin speed, delay time by
pressing the appropriate option button.
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option (Stop & Adding laundry Function)
Within 5 minutes from start, it is possible to put in the laundry or take out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished,the power will turn off automatically.
1. Open the door.
2. Remove laundry.
SAMSUNG Washing Machine Owner’s Instructions B-4
WD-J1255-01997M_EN.indd
4
2006-06-09
ソタタ・11:57:39
Washing a Load of Laundry
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the (On/Off) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature.
(cold water, 30˚C, 40˚C, 60˚C, 95˚C)
8. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed. [ ,
, 400, 800, 1000, 1200 , … revolutions per
minute(rpm)]
Notice: The rinse hold program allows you to take clothes that are dripping wet out of the
washing machine.
: No Spin
: Rinse Hold
10. Press the button repeatedly to cycle through the available delayed start options (from 3 hour to 24
hours in one hour increments). Displayed hours means the time of finished washing-cycle.
11. Press the Start/Pause button and the machine will begin the cycle.
Using delay start
You can set the washing machine to finish your wash automatically at a later time, choosing from 5 to 24
hour delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin counting
down until it reaches your finish time.
4. To cancel Delay Start, press the (On/Off) button, then turn the washing machine on again.
B-5 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
5
2006-06-09
ソタタ・11:57:40
Washing a Load of Laundry
Washing tips and hints
Sorting your laundry: Sort your laundry according to the following characteristics:
• Type of fabric care label symbol: Sort laundry into cottons, mixed fibres, synthetics, silks, wools
and rayon.
• Colour: Divide whites and colours. Wash new, coloured items separately.
• Size: Placing items of different sizes in the same load will improve the washing action.
• Sensitivity: Wash delicate items separately, using the Delicate wash programme for pure new
wool, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric
care chart in the appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine drum,
and the water tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should be tied
together.
Prewashing cotton: Your new washing machine, combined with modern detergents, will give perfect
washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly
dirty, use a prewash with a protein-based detergent.
Determining load capacity: Do not overload the washing machine or your laundry may not wash
properly. Use the chart below to determine the load capacity for the type of laundry you are washing.
Fabric Type
Load Capacity
WD-J1255
WD-B1255
Cotton /Heavy/Soak wash
8.0 kg
6.5 kg
Quick
3.0 kg
3.0 kg
Delicates
2.5 kg
2.5 kg
Blankets
5.0 kg
4.0 kg
Detergent tips: The type of detergent you should use is based on the type of fabric (cotton, synthetic,
delicate items, wool), colour, wash temperature, degree and type of soiling.
Always use “low suds” laundry soap, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based upon the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your water is,
ask your water authority.
Notice : Keep detergents and additives in a safe, dry place out of the reach of children.
SAMSUNG Washing Machine Owner’s Instructions B-6
WD-J1255-01997M_EN.indd
6
2006-06-09
ソタタ・11:57:40
Maintaining the Washing Machine
Draining the washing machine in an emergency
1. Unplug the washing machine from the power supply.
2. Open the filter-cover by using a coin or a key.
3. Unscrew the emergency drain cap by turning left. Grip
the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
4. Allow all the water to flow into a bowl.
5. Reinsert the drain tube and screw the cap back on.
6. Replace the filter-cover.
Repairing a frozen washing machine
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain
operations are normal.
Cleaning the exterior
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and nonabrasive household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
C-1 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:41
Maintaining the Washing Machine
Cleaning the detergent drawer and recess
1.
2.
3.
4.
5.
Press the release lever on the inside of the detergent drawer and pull it out.
Remove the cap from compartment ( ).
Wash all of the parts under running water.
Clean the drawer recess with an old toothbrush.
Reinsert the cap (Pushing it firmly into place) and replace the liquid detergent divider into the
drawer.
6. Push the drawer back into place.
7. Run a rinse programme without any laundry in the drum.
Cleaning the debris filter
Clean the debris filter 5 or 6 times a year, or when you see the following error message on the display:
1. Open the filter-cover, See “Draining the washing machine in an emergency” on page C-1.
2. Unscrew emergency drain cap by turning left and drain off all the water.
See “Draining the washing machine in an emergency” on page C-1.
3. Unscrew the filter cap and take it out.
4. Wash any dirt or other material from the filter. Make sure the drain pump propeller behind the filter
is not blocked. Replace the filter cap.
5. Replace the filter-cover.
SAMSUNG Washing Machine Owner’s Instructions C-2
WD-J1255-01997M_EN.indd
2
2006-06-09
ソタタ・11:57:43
Maintaining the Washing Machine
Cleaning the water hose mesh filter
You should clean the water hose mesh filter at least one time per year, or when you see the following
error message on the display:
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under
water until clean. Also clean the inside and outside of the threaded connector.
Option
Option
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.
C-3 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
3
2006-06-09
ソタタ・11:57:44
Troubleshooting
Problems and solutions
The washing machine will not start
•
•
•
•
Make sure the door is firmly closed.
Make sure the washing machine is plugged in.
Make sure the water source faucet is turned on.
Make sure to press the Start/Pause button.
No water or insufficient water supply
•
•
•
•
Make sure the water source faucet is turned on.
Make sure the water source hose is not frozen.
Make sure the water intake hose is not bent.
Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash programme is
complete
•
•
Make sure the washing machine is running with sufficient water pressure.
Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
•
•
•
•
Make sure the washing machine is set on a level surface. If the surface is not level, adjust the
washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure the washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
•
•
Make sure the drain hose is not squashed or bent.
Make sure the water hose mesh filter is not clogged.
The Door does not open
1.
2.
3.
4.
Disconnect the power plug from the power supply.
Remove the water from the washing machine.
Open the filter cover using a coin.
Locate the orange plastic tab and pull forward to open the door.
Understanding error messages
Error displayed
door
4E
Solution
•
Close the door.
•
•
Make sure the source water faucet is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
UE
•
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the final
spin result might be unsatisfactory and an “UE” error message will be shown in the
display window.
cE / 3E
HOT
•
Call after-sales service.
•
Displayed when the door does not open for high temperature.
Before contacting After-Sales service:
1. Try to remedy the problem (See “Troubleshooting” on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
SAMSUNG Washing Machine Owner’s Instructions D-1
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:44
Appendix
Fabric care chart
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any solvent
Item may be washed at 60 ˚C
Item may be washed at 40 ˚C
Dry clean with perchloride, lighter
fuel,pure alcohol or R113 only
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
Electrical warnings
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind:
• Operate the appliance only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult your appliance dealer or local
power company.
• Use only a grounded or polarized outlet. For your safety, this appliance is equipped with a
polarized alternating current line plug having one blade wider than the other. This plug will fit
into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still doesn’t fit, contact your electrician to replace your outlet.
• Protect the power cord. Power supply cords should be routed so that they are unlikely to be
walked on or pinched by items placed on or against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the unit.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
E-1 SAMSUNG Washing Machine Owner’s Instructions
WD-J1255-01997M_EN.indd
1
2006-06-09
ソタタ・11:57:51
Appendix
Protecting the environment
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance
cannot be connected to a power source. Remove the door so that animals and small children
cannot get trapped inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’
instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the
programme used).
Declaration of conformity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
Specification
TYPE
FRONT LOADING WASHER
DIMENSION
W600mm X D600mm X H850mm
WATER PRESSUERE
50 kPa ~ 800 kPa
NET WEIGHT
78 kg
POWER CONSUMPTION
WASHING
220 V
150 W
WASHING AND HEATING
220 V
2000 W
DRY
220 V
2100 W
PUMPING
220 V
34 W
83 l (STANDARD COURSE)
WATER VOLUME
SPIN REVOLUTION
PACKAGE Wt
LOAD
MODEL
WD-B1255 / WD-J1255
rpm
1200
PAPER
2.5 kg
PLASTIC
1.0 kg
WASH
6.5 kg
8.0 kg
DRY
3.0 kg
3.5 kg
SAMSUNG Washing Machine Owner’s Instructions E-2
WD-J1255-01997M_EN.indd
2
2006-06-09
ソタタ・11:57:51
MEMO
WD-J1255-01997M_EN.indd
3
2006-06-09
ソタタ・11:57:51
MEMO
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
U.A.E
800SAMSUNG (7267864)
www.samsung.com/mea
WD-J1255-01997M_EN.indd
5
2006-06-09
ソタタ・11:57:52
Download PDF

advertising