Samsung | WD10F7S7SRP/SA | Samsung WD10F7S7SRP 10kg Front Load Washer 7kg Dryer with Wi-Fi User Manual

WD10F7S7SRP
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
YUKON-WIFI-03073U-03_EN.indd 1
2016-04-11
6:36:08
contents
SAFETY INFORMATION
4
4
4
What you need to know about safety
instructions
Important safety symbols and precautions
16
17
17
17
18
18
18
18
18
23
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
Environment
24
24
25
28
29
30
30
30
31
32
33
34
34
36
36
37
Washing for the first time
Basic instructions
Using the control panel
Child Lock
Smart Check
Sound off
Delay end
My cycle
Air Wash
Using dry course
Washing clothes using the cycle selector
Washing clothes manually
Laundry guidelines
Detergent and additives information
Which detergent to use
Detergent drawer
38
38
38
39
45
50
Setting the Smart Control
Configuring the wired/wireless router
Check before installation
Setting the network (ANDROID)
Setting the network (IOS)
Connecting to the network using the WPS
settings (for WPS-enabled routers only)
Indoor control
Quick authentication (recommended)
Authentication
(if the quick authentication method fails)
Using the mobile app
Outdoor control
Registering your washer
Using the mobile app
SETTING UP YOUR WASHING
MACHINE
16
WASHING A LOAD OF LAUNDRY
24
SMART CONTROL
38
51
51
53
56
58
58
60
English - 2
YUKON-WIFI-03073U-03_EN.indd 2
2016-04-11
6:36:17
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
61
61
61
61
62
62
63
63
Cleaning the exterior
Cleaning the interior
Cleaning the dispensers
Storing your washer
Cleaning the debris filter
Cleaning the door seal/bellow
Preserving the top cover and the front frame
TROUBLESHOOTING AND
INFORMATION CODES
64
66
Check these points if your washing machine...
Information codes
67
Cycle chart
68
68
69
70
82
Fabric care chart
Protecting the environment
Specifications
Open Source Announcement
OpenSSL
64
CYCLE CHART
67
APPENDIX
68
English - 3
YUKON-WIFI-03073U-03_EN.indd 3
2016-04-11
6:36:17
safety information
Congratulations on your new Samsung washer. This manual contains important
information on the installation, use and care of your appliance. Please take time to
read this manual to take full advantage of your washer’s many benefits and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive
features and functions of your new appliance and retain it at a safe place near the appliance for your future
reference. Use this appliance only for its intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer
may differ slightly from those described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact your nearest service center or find help and information online at
www.samsung.com.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury,
death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
To reduce the risk of fire or explosion, follow these basic precautions.
CAUTION
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note
Read the instructions
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
English - 4
YUKON-WIFI-03073U-03_EN.indd Sec2:4
2016-04-11
6:36:17
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely operate
this appliance, become familiar with its operation and exercise care when using it.
SAFETY INFORMATION
1. This appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2. For use in Europe: This appliance can be used by children
aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
3. Children should be supervised to ensure that they do not play
with the appliance.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
5. The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
6. For appliances with ventilation openings in the base, that a carpet
must not obstruct the openings.
7. For use in Europe: Children of less than 3 years should be kept
away unless continuously supervised.
English - 5
YUKON-WIFI-03073U-03_EN.indd Sec2:5
2016-04-11
6:36:18
safety information
8. CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the
utility.
9. The tumble dryer is not to be used if industrial chemicals have
been used for cleaning.
10. The lint trap has to be cleaned frequently, if applicable.
11. Lint must not to be allowed to accumulate around the tumble
dryer. (not applicable for appliances intended to be vented to the
exterior of the building)
12. Adequate ventilation has to be provided to avoid the back flow
of gases into the room from appliances burning other fuels,
including open fires.
13. Do not dry unwashed items in the tumble dryer.
14. Items that have been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers, turpentine,
waxes and wax removers should be washed in hot water with an
extra amount of detergent before being dried in the tumble dryer.
15. Items such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with
foam rubber pads should not be dried in the tumble dryer.
16. Fabric softeners, or similar products, should be used as specified
by the fabric softener instructions.
17. The final part of a tumble dryer cycle occurs without heat (cool
down cycle) to ensure that the items are left at a temperature that
ensures that the items will not be damaged.
English - 6
YUKON-WIFI-03073U-03_EN.indd Sec2:6
2016-04-11
6:36:18
18. Remove all objects from pockets such as lighters and matches.
20. Exhaust air must not be discharged into a flue which is used for
exhausting fumes from appliances burning gas or other fuels.
21. The appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the tumble dryer, in such a way that a full opening of the tumble
dryer door is restricted.
22. WARNING: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by a utility.
English - 7
YUKON-WIFI-03073U-03_EN.indd Sec2:7
2016-04-11
6:36:18
SAFETY INFORMATION
19. WARNING: Never stop a tumble dryer before the end of the
drying cycle unless all items are quickly removed and spread out
so that the heat is dissipated.
safety information
To minimize the risk of fire in a tumble dryer, the following should be observed:
CAUTION
Items that have been spotted or soaked with vegetable or cooking oil constitute a
fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignite
spontaneously, especially when exposed to heat sources such as in a tumble dryer. The
items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the
heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or
storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is
unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated
by hair care products be placed in a tumble dryer they should first be washed in hot water
with extra detergent – this will reduce, but not eliminate, the hazard. The ‘cool down’ cycle
of tumble dryers should be used to reduce the temperature of the items. They should not
be removed from the tumble dryer or piled or stacked while hot.
Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/
gasoline, dry-cleaning solvents or other flammable or explosive substances should not
be placed in a tumble dryer. Highly flammable substances commonly used in domestic
environments include acetone, denatured alcohol, petrol/gasoline, kerosene, spot
removers(some brands), turpentine, waxes and wax removers.
Items containing foam rubber(also known as latex foam) or similarly textured rubber. Like
materials should not be dried in a tumble dryer on a heat setting. Foam rubber materials
can, when heated, produce fire by spontaneous combustion.
Fabric softeners or similar products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
Undergarments that contain metal reinforcements should not be placed in a tumble dryer.
Damage to the tumble dryer can result if metal reinforcements come loose during drying.
When available a drying rack could be used for such items.
Plastic articles such as shower caps or babies’ waterproof napkin covers should not be
placed in a tumble dryer.
Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and rubbercoated tennis shoes should not be placed in a tumble dryer.
English - 8
YUKON-WIFI-03073U-03_EN.indd Sec2:8
2016-04-11
6:36:18
Do not dry unwashed items in the tumble dryer(or washing machine drying mode,etc).
WARNING
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
Kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in the tumble dryer.
Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
The final part of a tumble dryer cycle occurs without heat(cool down cycle) to ensure that
the items are left at a temperature that ensures that the items will not be damaged.
Oil-affected items can ignite spontaneously, especially when exposed to heat sources such
as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil.
Oxidation creates heat. If the heat cannot escape, the items can become hot enough to
catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and
so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be washed
in hot water with extra detergent - this will reduce, but not eliminate, the hazard.
CAUTION
Never stop a tumble dryer before the end of the drying cycle unless all items are quickly
removed and spread out so that the heat is dissipated.
English - 9
YUKON-WIFI-03073U-03_EN.indd Sec2:9
2016-04-11
6:36:19
SAFETY INFORMATION
Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
tumble dryer.
safety information
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service
company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220-240 V / 50 Hz wall socket or higher and use the
socket for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Plug the
power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of Low Temperature.
- Frost may cause tubes to burst
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
English - 10
YUKON-WIFI-03073U-03_EN.indd Sec2:10
2016-04-11
6:36:19
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
- This may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the
product.
WARNING
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, Turn off the water & power supply immediately and contact your
nearest service centre.
- Do not Touch the power plug with wet hands
- Failure to do so may cause electric shock
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance,
remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
English - 11
YUKON-WIFI-03073U-03_EN.indd Sec2:11
2016-04-11
6:36:19
SAFETY INFORMATION
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
safety information
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb
in the appliance
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service
centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the Water tap and floods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
Do not let children (or pets) play in or on your product. The product door does not open
easily from the inside and children may be seriously injured if trapped inside.
English - 12
YUKON-WIFI-03073U-03_EN.indd Sec2:12
2016-04-11
6:36:19
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discolouration, deformation, damage or rust.
SAFETY INFORMATION
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the Water
Tap slowly.
Open the Water Tap slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the Water Tap is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Take care that the rubber seal and the front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.)
- If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leakage.
Open the Water Tap and check if the water supply hose connector is firmly tightened and
that there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water
leakage.
The product you have purchased is designed for domestic use only.
The use for business purposes qualifi es as product misuse. In this case, the product will
not be covered by the standard warranty provided by Samsung and no responsibility can
be attributed to Samsung for malfunctions or damages resulting from such misuse.
If the wash is not started and the laundry is left for a period of time after you have added
detergent or applied stain remover or pre-treatment onto the laundry, the laundry may be
discolored.
Select the recommended cycle and temperature on the basis of the laundry items, sort the
laundry by color on the basis of its colorfastness and select the appropriate cycle.
Make sure that foreign objects such as pins, buttons and coins are removed from clothing
items when adding laundry to the washer. Wash dirty laundry separately from relatively
clean items and wash fragile items separately from tougher textiles.
If an item is stained, wash it as soon as possible. Use stain remover or detergent only after
testing the colorfastness of the item by applying a small quantity to an inside seam.
English - 13
YUKON-WIFI-03073U-03_EN.indd Sec2:13
2016-04-11
6:36:20
safety information
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a
special program for washing these items.
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
* Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device. Do
not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
- This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
English - 14
YUKON-WIFI-03073U-03_EN.indd Sec2:14
2016-04-11
6:36:20
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the
product, discolouration, rust or bad odors.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
Lint must not to be allowed to accumulate around the tumble dryer.
Do Not Dry Unwashed Items In The Tumble Dryer.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in the tumble dryer.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
tumble dryer.
Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that
the items are left at a temperature that ensures that the items will not be damaged.
WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated.
That the appliance must not be installed behind a lockable door, a sliding door or a door
with a hinge on the opposite side to that of the tumble dryer.
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use the strong acid cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discolouration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
English - 15
YUKON-WIFI-03073U-03_EN.indd Sec2:15
2016-04-11
6:36:20
SAFETY INFORMATION
Do not wash large laundry items such as bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
setting up your washing
machine
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Option
Hot water supply
hose
Cold water supply
hose
Detergent drawer
Control panel
Door
Drain Hose
Tub
Debris filter
Drain tube
Adjustable legs
Filter cover
Option
Spanner
Bolt hole covers
Plastic Zip Hose Tie
Drain Hose
Water supply hose
Hose guide
* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).
English - 16
YUKON-WIFI-03073U-03_EN.indd Sec9:16
2016-04-11
6:36:20
MEETING INSTALLATION REQUIREMENTS
WARNING
SETTING UP
Electrical supply and grounding
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• AC 220-240 V / 50 Hz fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result in electric shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 137 kPa ~ 800 kPa. Water
pressure less than 137 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 120cm of the back of your washing machine for the provided inlet
hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 305 cm long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
English - 17
YUKON-WIFI-03073U-03_EN.indd Sec9:17
2016-04-11
6:36:21
setting up your washing
machine
Drain
Samsung recommends a standpipe height of 46cm. The drain hose must be routed through
the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside
diameter of the drain hose. The drain hose is attached at the factory.
Flooring
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 150 mm
Top – 432 mm
Front – 51 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 cm² unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
English - 18
YUKON-WIFI-03073U-03_EN.indd Sec9:18
2016-04-11
6:36:21
STEP 2
Removing the shipping bolts
SETTING UP
Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
1. Loosen all the bolts with the supplied wrench.
Option
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
Option
3. Fill the holes with the supplied plastic covers.
Option
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
English - 19
YUKON-WIFI-03073U-03_EN.indd Sec9:19
2016-04-11
6:36:21
setting up your washing
machine
STEP 3
Adjusting the Levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Level your washing machine by turning the levelling feet in
and out as necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected to
the washing machine at one end and to the
water tap at the other. Do not stretch the water
supply hose. If the hose is too short, replace
the hose with a longer, high pressure hose.
Option
Option
2. Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
English - 20
YUKON-WIFI-03073U-03_EN.indd Sec9:20
2016-04-11
6:36:22
Connecting the water supply hose
SETTING UP
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
Option
English - 21
YUKON-WIFI-03073U-03_EN.indd Sec9:21
2016-04-11
6:36:22
setting up your washing
machine
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
WARNING
•
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
✗
✗
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
English - 22
YUKON-WIFI-03073U-03_EN.indd Sec9:22
2016-04-11
6:36:23
Connecting the drain hose
60 ~ 90 cm
Drain hose
Hose guide
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240 V / 50 Hz approved electrical outlet
protected by a fuse or circuit breaker. (For more information on electrical and grounding
requirements, see page 17.)
Test run
Make sure that you install your washing machine correctly by running the Rinse + Spin
cycle after the installation is complete.
STEP 6
Calibration Mode
Run calibration mode, when the washing machine is installed for the first time (or you want to
calibrate it at any time).
1. Ensure that you have removed laundry or any contents from inside the machine.
2. Press the Power button to turn on the machine, then press and hold the Temp. and
Delay End buttons for few seconds. If done correctly, ‘Cb’ will be displayed on the screen.
3. Once “Cb” is displayed on the screen, press the Start/Pause button. The calibration mode
starts.
4. The drum will spin left and right several times. (The calibration mode will take about
4 minutes.)
5. When the calibration is finished, “END” message displays.
6. If the door is unlocked, the machine turns off automatically.
ENVIRONMENT
Please dispose of the packaging materials for this product in an “environmentally friendly” manner.
For further detail, please contact your local area authority.
English - 23
YUKON-WIFI-03073U-03_EN.indd Sec9:23
2016-04-11
6:36:23
SETTING UP
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
Before using powdered detergent, remove the Liquid Detergent holder from the
compartment. Powdered detergent will not dispense from the Liquid Detergent holder.
Compartment
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”)
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 32.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not touch the door glass while your washing machine is running or it may be hot.
• Do not open the detergent drawer or the debris filter while your washing machine is
running or you might be exposed to hot water or steam.
• Do not wash water-proofed items in normal cycle except outdoor care program.
2.
3.
4.
5.
Close the door until it latches.
Turn the power on.
Add detergent and additives to the dispenser drawer.
Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
English - 24
YUKON-WIFI-03073U-03_EN.indd Sec5:24
2016-04-11
6:36:24
USING THE CONTROL PANEL
2
3
4
5
6
7
9
8
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector”. (see page 33)
1
CYCLE SELECTOR
Cotton - For average or lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
Synthetics - For averagely or lightly soiled blouses, shirts, etc., made
of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar
blends.
Bedding - For bulky items such as blankets and sheets. When you are
washing comforters, use liquid detergent.
Quick Wash - For lightly soiled garments needed quickly.
Water Saving - This is a specially designed course that enables you to
wash laundry with the minimum amount of water.
(Water Saving, 40 ˚C, 2 Rinses, 1200 rpm spin is suitable for a normally
soiled cotton load. Energy and water labelling test programme in
accordance with AS/NZS 2040.)
Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
Power Bubble - For heavily soiled garments.
Outdoor Care - Use this cycle to wash exercise wear such as sports
jersey, training pants and shirts/tops. This cycle provides effective soil
and sweat stains removal.
Baby Care - High temperature wash and extra rinses helps to ensure
that virtually no washing powder should remain to mark your thin clothes.
Wool - This is the course for lingerie or clothing made from wool.
For machine-washable wool.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved
washing results and for improved care of the wool fibers.
Air Wash - This course is useful for removing bad odors. Turning the
Cycle Selector cycles through the following operating modes.
• Deodorization - Helps to reduce bad smells from the laundry
• Sanitization - Deodorize and sanitize the laundry by strong air wash
action with higher temp.
Drying - Select to dry laundry automatically by detecting the amount and
weight of the laundry.
English - 25
YUKON-WIFI-03073U-03_EN.indd Sec5:25
2016-04-11
6:36:25
WASHING A LOAD OF LAUNDRY
1
washing a load of laundry
DIGITAL DISPLAY
The large Digital Display is easy to use. It provides instructions and
diagnostics while keeping you updated on the cycle status and time
remaining.
3
SELECT CYCLE
OPTION
Smart Control - Smart Control technology enables you to control your
washer through personal technology devices such as smart phones. You
don’t have to be on standby until the cycle ends. Smart Control allows
you to monitor the washing process and lets you know when the cycle is
complete.
Delay End - Any cycle can be delayed for up to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be
finished.
Pre Wash - To use this feature add detergent to the Pre Wash section of
the detergent compartment. When turned on, the washer fills with cold
water and detergent, tumbles, then drains and advances to the selected
wash cycle.
Some cycles cannot be selected with this option.*
* You cannot select the Pre Wash option in the Wool, Outdoor Care and
Quick Wash cycles.
My Cycle - Press this button when the laundry is heavily soiled and
needs to be washed intensively. The cycle time will be increased if the
intensive wash is on.
Drum Clean - Use for drum cleaning. It helps to clean dirt and bacteria
of drum. Regular use (after every 40 washes) is recommended.
No detergent or bleach needed.
Sound Off - Press the button to turn on or off the sound.
Garment+ - You can add or take out laundry items even after the
wash has started, as long as the “Garment+” light is on. Pushing the
Start/Pause button unlocks the door, unless the water is too hot or if
there is too much water in your Washer. If you are able to unlock the
door and wish to continue the wash cycle, close the door and press the
Start/Pause button.
4
TEMPERATURE
BUTTON
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water, 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
5
RINSE BUTTON
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
6
SPIN BUTTON
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
2
English - 26
YUKON-WIFI-03073U-03_EN.indd Sec5:26
2016-04-11
6:36:25
DRYING BUTTON
8
START/PAUSE
BUTTON
Press to pause and restart programs.
9
POWER BUTTON
Press once to turn your washer on, press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
English - 27
YUKON-WIFI-03073U-03_EN.indd Sec5:27
2016-04-11
6:36:25
WASHING A LOAD OF LAUNDRY
7
Pressing the button cycles through the following options.
Cupboard  Iron  Small Load  Low Temp.  Time (30 min. 
1:00 h  1:30 h  2:00 h  2:30 h)  Cupboard
Cupboard - Select to dry laundry automatically by detecting the amount
and weight of the laundry. Select this to dry cotton clothing such as
cotton trousers, T-shirts, and cotton underwear.
Iron - Finishes the dry cycle in a moist state appropriate for Ironing.
Small Load - Select this course to dry a Small Load amount of laundry
(approximately 400g). (3~4 towels, a pair of pants (school uniform) or
2 long-sleeve shirts.)
Low Temp. - Dry clothing which may become deformed at high
temperatures at a Low Temp. (Mixed fabrics and synthetic fibers such as
polyester and nylon.)
Time - Dry the laundry for the specified period of time.
• You must avoid washing laundry that may not be dried as it may
be deformed even at Low Temp..
• The Normal, Extra, Iron and Light Dry options detect the weight
of the laundry in order to display an accurate drying time and
dry them more completely.
• The drying conditions may differ depending on the type and the
amount of laundry.
washing a load of laundry
Child Lock
Child Lock prevents children from playing with your washer.
Once you have activated the Child Lock function, the control panel cannot be activated,
preventing children from playing with the washer.
Activating/Deactivating
Press and hold both the Temp. and Rinse buttons
simultaneously for approximately 3 seconds.
• When you activate the Child Lock function, the door locks
and the “Child Lock [ ]” lamp illuminates.
• If you press the Start/Pause button after you have activated
the Child Lock function, none of the buttons will work except
for the Power button.
• If you press a button when the buttons are locked, the
“Child Lock [ ]” lamp blinks.
Pausing the Child Lock function
When the door is locked or the buttons are locked by the
3 SEC.
Child Lock function, you can pause the Child Lock operation
for 1 minute by pressing and holding both the Spin and Drying
buttons simultaneously for approximately 3 seconds.
• If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user
convenience. During this period, the “Child Lock [ ]” lamp blinks.
• If you open the door after the minute is over, an alarm sounds for up to 2 minutes.
• If you close the door within the 2 minutes, the door is locked and the Child Lock function is
reactivated. If you close the door after the 2 minutes, the door is not locked automatically
and no alarm sounds.
Deactivating the Child Lock function
Press and hold both the Temp. and Rinse buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the “Child Lock [ ]”
is turned off.
• The Child Lock function prevents children or the infirm from accidently operating the washer
and injuring themselves.
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power is
turned off.
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must first pause or
deactivate the Child Lock function.
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.
When the Child Lock function is activated, only the Power button works. The Child Lock
function remains on even after the power is turned on and off or after the disconnecting and
reconnecting the power cord.
English - 28
YUKON-WIFI-03073U-03_EN.indd Sec5:28
2016-04-11
6:36:25
Smart Check
This function enables you to check the status of the washing machine using a smartphone.
WASHING A LOAD OF LAUNDRY
The Smart Check function has been optimized for:
Galaxy S and Galaxy S2
iPhone 4 and iPhone 4S
Downloading the Samsung Smart Washer app
Download the Samsung Smart Washer app to your mobile phone from the Android market
(Play store) or Apple App store and install it. You can easily find it by searching for
“Samsung Smart Washer”.
Using the Smart Check function
1. Hold down the Spin and Drying buttons at the same time
for 3 seconds when an error occurs to run the Smart Check
function. Alternatively, the Smart Check function can be run
if no button is pressed after the washing machine is turned
on.
2. The LED segments on the display panel rotate for 2 or 3
seconds and the Smart Check code is displayed on the
washing machine’s display panel.
3. Run the Samsung Smart Washer app on your smart
phone and tap the Smart Check button.
‘Smart Check’ may be changed to ‘Smart Care’ according
to the language selection.
3 SEC.
4. Focus your smart phone’s camera on the Smart Check code displayed on the washing
machine’s display panel.
• If light from a light bulb, fluorescent bulb or lamp is reflected on the display panel of
the washing machine, the smart phone may not be able to easily recognize the Smart
Check code.
• If you hold the smart phone at a too wide angle relative to the front of the display panel,
it may not be able to recognize the error code. For best results, hold the smart phone
so that the front of the display panel and the smart phone are parallel or nearly parallel.
5. If it focuses correctly, the Smart Check code is automatically recognized, and the detailed
information of the status of your washing machine, the error and the countermeasures are
displayed on your smart phone.
6. If the smart phone fails to recognize the Smart Check code more than twice, please enter
the Smart Check code displayed on your washing machine’s display panel into the Samsung
Smart Washer app manually.
English - 29
YUKON-WIFI-03073U-03_EN.indd Sec5:29
2016-04-11
6:36:26
washing a load of laundry
Sound off
The Sound Off function can be selected during all courses. When this function is selected, sound
is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is
retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function. The “Sound Off” will be lit when this
feature is activated.
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of max 24 hours (in 1 hour increments). The hour displayed indicates the time at which the
wash will be finished
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin
counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The
“My Cycle” light goes on, indicating activation. You can select all options as follows in “My Cycle”
mode.
1. Select the cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
See the “cycle chart” on page 67 for available option settings with each cycle.
3. Start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.
The washer will display the cycle and options you selected the next time you choose “My Cycle”.
You can change the “My Cycle” settings by repeating the same process above.
The washer displays the last settings used the next time you choose “My Cycle”.
•
•
•
When you hold down the My Cycle button for 3 seconds or longer, the My Cycle Save mode
is activated, and the My Cycle Save alarm beeps.
When you press and release the My Cycle button for less than 3 seconds, the My Cycle
Load mode is activated, and the My Cycle Load alarm beeps.
When the My Cycle Save mode is activated, the indicators of the selected cycle and
functions will blink for 3 seconds. If you change the cycle or any functions while the indicators
are blinking, the blinking stops and the indicators light up.
English - 30
YUKON-WIFI-03073U-03_EN.indd Sec5:30
2016-04-11
6:36:27
Air Wash
MODE
CYCLE TIME
Deodorization
26 min
Sanitization
35 min
•
When one of these options has been selected, no other button can be selected and you
can only select the delay end time from between 24:00.
4. Close the door and press the Start/Pause button.
• When there is water in the tub, Air Wash cannot be worked. Drain the water and select
Air Wash.
• Press the Start/Pause or Power button to remove the laundry.
• Fragrance or dryer sheets can be used with Air Wash programs to add fragrance to your
refreshed laundry (one sheet per one or two items).
Avoid Air Wash the following clothes:
• Sensitive clothes made of leather, mink, fur, silk, etc.
• Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits may have their
Vdecorations loosened.
• Clothes trimmed with buttons can cause them to break.
• Starchy clothes can become deformed.
• Hard bedding such as a wooden pillows (neck-rest)
- Pillows or blankets filled with plastic or starch rather than cotton
- Electric blankets
• Furry blankets
• Bulky blankets
• Latex pillow
English - 31
YUKON-WIFI-03073U-03_EN.indd Sec5:31
2016-04-11
6:36:27
WASHING A LOAD OF LAUNDRY
Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing
that can be refreshed includes woolen coats, cotton jumpers, sweaters and suits. [Two items or
less (less than 1 kg)]
1. Open the door, place the laundry into the washing machine and close the door.
2. Press the Power button.
3. Select Air Wash by turning the Cycle Selector.
washing a load of laundry
USING DRY COURSE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line
for the dried clothes of 7.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button and then press the Drying button.
: The standard course will be selected automatically.
Drying is not available for Drum Clean, Outdoor Care, Wool, Bedding and Air Wash courses.
3. Select Drying button as follows.
Drying Programs
• Every press of this button will select drying type repeatedly in the following order:
Cupboard  Iron  Small Load  Low Temp.  Time (30 min.  1:00 h  1:30 h 
2:00 h  2:30 h)  Cupboard
Time
(Max Load)
Time
(Soft Keep)
7.0 kg
340 min
30 min
For leaving items partially damp
so that it can be easily ironed.
7.0 kg
170 min
30 min
Dries the laundry at a Low Temp.
to protect the texture of the
laundry.
5.0 kg
300 min
30 min
Small Load
Dries 3~4 towels or 2 shirts.
0.4 kg
40 min
30 min
Time
You can select the appropriate
drying time depending on the
texture, quantity, and moisture.
-
30/60/90/
120/150 min
30 min
Drying Type
Information
Auto
Drying
Cupboard
Standard: Dries the laundry.
Iron
Low Temp.
Time
Drying
Max
Load
• It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
• For any loads of laundry, you can use the Auto Dry function. If you find that the
laundry is not completely dried, use the Time Dry function additionally.
• If both the spin and drying cycles are selected, the spin speed is automatically selected
to enhance the drying efficiency.
• When using the drying cycle, check if the water supply valve is opened.
• Soft Keep function is to prevent laundry from being wrinkled when the laundry is not
immediately removed after drying.
• While the Soft Keep function is running, “END” is displayed waiting for you remove the
laundry.
4. Press Start/Pause button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If cold water is not supplied, drying will not be performed.
• If you select Dry only, Spin is automatically selected as well to improve the drying
performance (Cupboard only) If you don’t want the Spin operation, please manually
unselect Spin by pressing the Spin button.
English - 32
YUKON-WIFI-03073U-03_EN.indd Sec5:32
2016-04-11
6:36:27
Washing clothes using the cycle selector
Pre-wash is only available when selecting the Baby Care, Power Bubble, Cotton,
Synthetics, Water Saving cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Bedding, Quick Wash, Power Bubble, Baby Care and Wool. The relevant
indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
1.
2.
3.
4.
Within 5 minutes of starting a wash, it is possible to add/remove laundry items to the wash.
Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
English - 33
YUKON-WIFI-03073U-03_EN.indd Sec5:33
2016-04-11
6:36:27
WASHING A LOAD OF LAUNDRY
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
washing a load of laundry
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.(
: No Spin)
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 1 hour to 24 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new
woollen items, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small Load, irregularly shaped hard
objects, such as coins, knives, pins, and paperclips could damage your washing machine. Do
not wash clothing with large buckles, buttons, or other heavy metal objects.
Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and
embroidered clothes inside out before washing them. If zips of pants and jackets are open while
washing, the spin basket may be damaged. Zips should be closed and fixed with a string before
washing.
Clothing with long strings may become entangled with other clothes damaging them. Be sure to
fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
English - 34
YUKON-WIFI-03073U-03_EN.indd Sec5:34
2016-04-11
6:36:27
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart
below to determine the load capacity for the type of laundry you are washing.
Load Capacity
Model
WD10F7S7SRP
Wool
3.0 kg
Baby Care
10.0 kg
Outdoor Care
3.0 kg
Power Bubble
10.0 kg
Cotton
10.0 kg
Synthetics
10.0 kg
Bedding
4.0 kg
Quick Wash
5.0 kg
Water Saving
10.0 kg
WASHING A LOAD OF LAUNDRY
Fabric Type
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Duvet cover, the wash time may be lengthened or the spin
efficiency may be degraded.
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material
and damage the laundry. Therefore make sure to place them inside
a fine laundry net.
• Small Load, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
CAUTION
Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and cause an accident resulting in
injury.
English - 35
YUKON-WIFI-03073U-03_EN.indd Sec5:35
2016-04-11
6:36:28
washing a load of laundry
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate
items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
Powdered detergent should be thoroughly dissolved in a small amount of warm water
before adding to the machine.
Please note the following when using the Wool course.
• Use a neutral liquid detergent for wool only.
• When using a powder detergent, it may remain on the laundry and cause damage to the
material (wool).
English - 36
YUKON-WIFI-03073U-03_EN.indd Sec5:36
2016-04-11
6:36:28
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
WASHING A LOAD OF LAUNDRY
Do not open the detergent drawer while your washing machine is running or you might be
exposed to hot water or steam.
1. Pull out the detergent drawer on the left side of the control
panel.
2. Add the recommended amount of laundry detergent
before starting
directly into the detergent compartment
your washing machine.
3. Add the recommended amount of fabric softener into the
softener compartment
if required. DO NOT exceed the
MAX FILL ( ) line.
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash
compartment .
When washing large items do NOT use the following
detergetnt types.
• Tablet and capsule type detergents
• Detergents using a ball and net
Concentrated or thick fabric softener, conditioner and liquid detergent must be diluted with
a little water before being poured into the dispenser (prevents the overflow from becoming
blocked).
English - 37
YUKON-WIFI-03073U-03_EN.indd Sec5:37
2016-04-11
6:36:28
smart control
SETTING THE SMART CONTROL
Connect a wired/wireless router and the washer through a wireless connection, connect to www.
samsungsmartappliance.com and register the washer to the Smart Control service.
This product does not contain a wireless router.
Configuring the wired/wireless router
•
•
•
•
•
This product supports DHCP (Dynamic Host Configuration Protocol). Therefore, if a user
wants to use an existing wired/wireless router, the router’s DHCP server function must be
enabled.
Set the channel for the connection with the wired/wireless router to a channel that is not
being used.
This washer only supports OPEN, WPA/TKIP and WPA2/AES modes. If the wireless router
is set to a mode other than these three modes, the washer may not connect to it. We
recommend that you use WPA2/AES for 802.11n.
The quality of the wireless network may be affected by the surrounding environment.
If your Internet service provider has registered and fixed the MAC address (unique
identification number of a device) of the user’s PC or modem, you may not be able to
connect the washer to the Internet. Please ask your Internet service provider about the
procedures to connect a device (e.g. washer) other than a computer to the Internet. If your
Internet service provider requires an ID and password to connect to the Internet, you may
not be able to connect the washer to the Internet. In this case, you have to enter the ID and
password to connect to the Internet.
You may not be able to connect to the Internet due to a firewall. In this case, ask your
Internet service provider for assistance.If you cannot connect the washer to the Internet even
after contacting your Internet service provider, please contact a Samsung Electronics dealer
or service center.
Check before installation
•
•
•
•
For the procedures to install a normal wired/wireless router, refer
to the user manual of the corresponding wired/wireless router.
Samsung washers only support Wi-Fi 2.4Ghz.
The Samsung washer supports the wireless communication
standard IEEE802.11 b/g/n (2.4 GHz).
A certified wireless router has the Wi-Fi CERTIFIED logo on its
packaging or user manual.
English - 38
YUKON-WIFI-03073U-03_EN.indd 38
2016-04-11
6:36:29
SETTING THE NETWORK (ANDROID)
1. Touch and bring up the applications menu on your phone. Then find
and open the “Play Store” icon.
SMART CONTROL
2. Once the “Play Store” has been open, do a search.
3. Once the search box appears type in
“Samsung Smart Washer”.
English - 39
YUKON-WIFI-03073U-03_EN.indd 39
2016-04-11
6:36:29
smart control
4. Once the search is complete the App
“Samsung Smart Washer” will be displayed.
You need to download this App to your phone.
Make sure the app changes from “Free” to
“Installed”
5. Once the phone app has been downloaded to your phone, you are
now ready to set up the washer Wi-Fi control.
6. Press the “Settings” icon. Once the settings
menu appears press the wireless and network
section.
English - 40
YUKON-WIFI-03073U-03_EN.indd 40
2016-04-11
6:36:29
7. After selecting the wireless and network select
Wi-Fi setting. Then turn on the Wi-Fi.
SMART CONTROL
8. Once the list of available networks appears,
select the network to be used and enter the
password if necessary.
9. Once you are connected to the selected
network go back to the applications screen
on your mobile phone. Once you are in the
phones application screen touch the Samsung
icon “Samsung Smart Washer” that was
downloaded at the beginning of this process.
English - 41
YUKON-WIFI-03073U-03_EN.indd 41
2016-04-11
6:36:30
smart control
10. After opening the Samsung app,
select “Select a Country” and then
“Connection setup”.
11. You need to first press the Power button to
activate the your machine. You can activate the
machine to any wash cycle.
12. Simultaneously hold down the Smart Control
+ Delay End buttons for 5 seconds. The
‘Wi-Fi’ indicator blinks for approximately 60 ~
90 seconds. After the indicator stops blinking,
proceed to the next step.
13. After you activate the machine, press the
Temp. + Start/Pause buttons simultaneously
for 5 seconds. Then the “AP” menu appears on
the LED screen.
English - 42
YUKON-WIFI-03073U-03_EN.indd 42
2016-04-11
6:36:30
SMART CONTROL
14. After the AP menu appears on the LED
screen, press the Start/Pause button. Once
the Start/Pause button is pressed the “AP”
displayed on the LED screen should start to
blink.
If the you press the Start/Pause and the “AP”
doesn’t blink try again after a moment.
15. Once the mobile app is open select the
“Setting Start” key.
The Wi-Fi indicator will blink on & off
on the phone several times.
If the “FAP” code appears on the display
panel, press the Start/Pause button and
restart from Step 14.
16. Once the unit starts connecting the phone will
load the AP list. When the AP list is loaded you
need to select the network.
Please make sure the app and smart phone
are connected to the same network/wireless
AP.
17. After selecting the network you need to enter
your password. Once you enter your password
select “Connect”. The unit start setting up the
network. This process delivers the connection
information of the “AP” that is connected to the
mobile phone to the product.
English - 43
YUKON-WIFI-03073U-03_EN.indd 43
2016-04-11
6:36:31
smart control
18. The ‘oAP’ code appears on the display
panel of the washing machine and the
“Transfer complete” message appears on the
mobile app.
The phone is now connected to the machine
through the network.
If the “FAP” code appears on the display
panel, press the Start/Pause button and
restart from Step 14.
19. After the phone is connected to the machine,
press the Temp. + Start/Pause buttons
simultaneously for 5 seconds. Then the original
wash cycle will be displayed on the LED
screen.
20. After the wash cycle has been displayed wait
approximately 1 minute. You will then see the
Smart Control icon start to blink.
When done, go to page 51.
English - 44
YUKON-WIFI-03073U-03_EN.indd 44
2016-04-11
6:36:31
SETTING THE NETWORK (IOS)
1. Find and open the “App Store” icon.
SMART CONTROL
2. Once the “App Store” has been open, do a search.
3. Once the search box appears type in
“Samsung Smart Washer”.
4. Once the search is complete the App
“Samsung Smart Washer” will be displayed.
You need to download this App to your phone.
Make sure the app changes from “Free” to
“Installed”
English - 45
YUKON-WIFI-03073U-03_EN.indd 45
2016-04-11
6:36:32
smart control
5. Once the phone app has been downloaded to your phone, you
are now ready to set up the washer Wi-Fi control.
6. You need to first press the Power button to
activate the your machine. You can activate the
machine to any wash cycle.
7. Simultaneously hold down the Smart Control
+ Delay End buttons for 5 seconds. The
‘Wi-Fi’ indicator blinks for approximately 60 ~
90 seconds. After the indicator stops blinking,
proceed to the next step.
8. After you activate the machine, press the
Temp. + Start/Pause buttons simultaneously
for 5 seconds. Then the “AP” menu appears on
the LED screen.
English - 46
YUKON-WIFI-03073U-03_EN.indd 46
2016-04-11
6:36:33
SMART CONTROL
9. After the AP menu appears on the LED
screen, press the Start/Pause button. Once
the Start/Pause button is pressed the “AP”
displayed on the LED screen should start to
blink.
If the you press the Start/Pause and the “AP”
doesn’t blink try again after a moment.
10. Press the “Settings” icon. Once the settings
menu appears press the Wi-Fi icon.
11. You can see “SMARTWASHER” in the Wi-Fi
list. Select the SMARTWASHER and input the
password (WASHER2012).
You have to input as Capital.
After typing the password, select the join
button.
12. Once you are connected to the selected
network go back to the applications screen
on your mobile phone. Once you are in the
phones application screen touch the Samsung
icon “Samsung Smart Washer” that was
downloaded at the beginning of this process.
English - 47
YUKON-WIFI-03073U-03_EN.indd 47
2016-04-11
6:36:34
smart control
13. After opening the Samsung app, select “Connection setup”.
14. Tap the “Setting Start” and input your SSID,
Authentication Type, Encryption Type,
password of AP.
This process delivers the connection
information of the “AP” that is connected to the
mobile phone to the product.
Check the security option of the router and
then set the wireless network configuration
again as below.
-
select the Security mode : WPA and
Encryption:TKIP
select the Security mode : WPA2 and
Encryption:AES
refer to wireless router manual for the
security option of the wireless router.
15. The ‘oAP’ code appears on the display
panel of the washing machine and the
“Transfer complete” message appears on the
mobile app.
English - 48
YUKON-WIFI-03073U-03_EN.indd 48
2016-04-11
6:36:34
SMART CONTROL
16. After the phone is connected to the machine,
press the Temp. + Start/Pause buttons
simultaneously for 5 seconds. After 5 seconds
the original wash cycle will be displayed on the
LED screen.
17. After the wash cycle has been displayed wait
approximately 1 minute. You will then see the
Smart Control icon start to blink.
18. Connect to the AP, which is connected with the washing machine, on
your mobile.
The phone is now connected to the washing machine through the
network.
When done, go to page 51.
English - 49
YUKON-WIFI-03073U-03_EN.indd 49
2016-04-11
6:36:35
smart control
CONNECTING TO THE NETWORK USING THE WPS SETTINGS (FOR
WPS-ENABLED ROUTERS ONLY)
• Samsung washers use PBC as the WPS type. Check if the current wired/wireless router
supports Wi-Fi Protected Setup™(WPS).
• Check if the wired/wireless share has a WPS button.
1. Turn the washing machine on.
2. Press and hold both the Temp. + Start/Pause buttons for
5 seconds.
3. Turn the Cycle Selector until “UP” is displayed on the
display panel and press the Start/Pause button.
4. Press and hold the WPS button of the wired/wireless
router that will be connected with the washer for 120
seconds or less to run the WPS function of the wired/
wireless router. If the WPS function runs, the wired/wireless
router automatically fetches the necessary information from
the washer and the washer is automatically connected to
the Internet through the wired/wireless router.
5. When the WPS setting is complete, “OUP” will appear on the display.
If the connection is not established within 5 minutes, “FUP” is displayed on the display
panel.
CAUTION
• How to use the WPS function of the wired/wireless router may differ depending on
the manufacturer. Refer to the user manual of the corresponding wired/wireless
router.
• Even after the WPS setup is complete, it may take some time until the actual
connection is established to allocate an IP address through DHCP (up to 5 minutes).
• Note that if you use a wired/wireless router that is not WPS-certified, the washer
may not be connected through Wi-Fi or a device that was connected to the wired/
wireless router may be disconnected.
• Please note that for some wired/wireless routers, if you press and hold the WPS
button for some time, the settings of the router may be reset.
6. Press the Temp. + Start/Pause buttons simultaneously for
5 seconds. Then the original wash cycle will be displayed on the LED
screen.
7. After the wash cycle has been displayed wait approximately 1 minute.
You will then see the Smart Control icon start to blink.
English - 50
YUKON-WIFI-03073U-03_EN.indd 50
2016-04-11
6:36:35
INDOOR CONTROL
Quick authentication (recommended)
SMART CONTROL
1. The “Authentication” only needs to be run with
the initial setup. Touch the “Indoor control” tab
to search for the washer’s name. Once the
washer’s name(WD10F7S) is displayed touch
tab.
2. After you touch the washer name tab you need to touch the “OK” tab
to proceed with the certification.
3. After you touch the confirm tab you will now start preparing the
certification.
English - 51
YUKON-WIFI-03073U-03_EN.indd 51
2016-04-11
6:36:36
smart control
4. Follow the instructions displayed on the phone to start the washer
setup.
The waiting time for authentication is 20 seconds.
Perform step 5 below within 20 seconds.
5. Press the Smart Control button.
If the lamp on the Smart Control button is on, press
the Smart Control button once to turn it off. After
waiting for 3 seconds, press the button again.
6. The washer is now connected. Touch the Course button and you can
now control the washer from your phone.
English - 52
YUKON-WIFI-03073U-03_EN.indd 52
2016-04-11
6:36:36
Authentication (if the quick authentication method fails)
SMART CONTROL
1. The “Authentication” only needs to be run with
the initial setup. Touch the “Indoor control” tab
to search for the washer’s name. Once the
washer’s name WD10F7S is displayed touch
tab.
2. Verify the that the Wi-Fi icon is not blinking.
Press the Temp. + Start/Pause buttons
simultaneously for 5 seconds. “AP” will now be
displayed.
3. After you touch the washer name tab you need to touch the “OK” tab
to proceed with the certification.
English - 53
YUKON-WIFI-03073U-03_EN.indd 53
2016-04-11
6:36:37
smart control
4. After you touch the confirm tab you will now start preparing the
certification.
5. Follow the instructions displayed on the phone to start the washer
setup.
The waiting time for authentication is 20 seconds.
Perform step 6 below within 20 seconds.
6. Once the “AP” is displayed you need to turn the knob counter
clockwise until “PS” is displayed. After the “PS” is displayed press the
Start/Pause button.
English - 54
YUKON-WIFI-03073U-03_EN.indd 54
2016-04-11
6:36:37
7. Once the Start/Pause button is pressed the “PS” will start to blink.
Once it starts blinking the phone will automatically start to connect.
SMART CONTROL
8. After the “PS” is displayed, press the Temp. + Start/Pause buttons
simultaneously for 5 seconds. Please wait until the Smart Control
Enabled icon [ ] starts blinking. If the Smart Control enabled icon
starts blinking, press Smart Control button to activate the Smart
Control. If the Smart Control is enabled, the Smart Control enabled
icon [ ] is turned on.
9. Press the washer name tab to connect to the washer.
The washer is now connected. Touch the Course button and you can
now control the washer from your phone.
Check if the ‘Smart Control’ indicator turns on. If it turns on,
the Smart Control function is activated. If it turns off, press the
Smart Control button to activate the Smart Control function.
English - 55
YUKON-WIFI-03073U-03_EN.indd 55
2016-04-11
6:36:38
smart control
Using the mobile app
1. Make sure that the ‘Wi-Fi’ indicator is on.
Then press the Smart Control button to
activate the Smart Control function. When
this function is activated, the ’Smart Control’
indicator will light up.
Now press the “Samsung Smart Washer”
icon.
1. If you try to activate the Smart Control
function while the door is open, the
function will be activated at first, but it will
be automatically deactivated in a minute.
2. After you touch the
“Samsung Smart
Washer” icon the will
search for the washer.
Once the phone
connects the washer,
the washer’s name, or
“MAC” will appear. Now
touch the washer name.
MAC address
3. Once the connection is established, touch the
“Course button”. The unit should display the
“Option Pop-up” screen. Once Choose Cycle
screen is displayed touch the “Start” tab at the
bottom.
English - 56
YUKON-WIFI-03073U-03_EN.indd 56
2016-04-11
6:36:38
SMART CONTROL
4. Now touch the “Start”
button and activate the
wash cycle. You can
monitor the wash cycle
to check the status
of the cycle. Once
the cycle is finished
the phone will display
“Cycle completes”.
For iPhones, you need to run the Outdoor control function in the app first to authenticate
the Push Notification service after registering your washer to the Samsung Smart appliance
(www.samsungsmartappliance.com) website.
English - 57
YUKON-WIFI-03073U-03_EN.indd 57
2016-04-11
6:36:39
smart control
OUTDOOR CONTROL
Registering your washer
1. Access Samsung Smart appliance
website.
(http://www.samsungsmartappliance.com)
2. Enter the User ID and Password to log in.
If you don’t have an account, press
“Create a Samsung account” and fill in
the form to become a member.
3. Select “My page”  “My page”.
4. Select “Add device”.
5. After entering the MAC written from
following instruction. (Washing Machine)
1) Press and hold both the Temp., and
Start/Pause buttons for 5 seconds.
2) Turn the Cycle Selector until “Ad” is
displayed on the display panel and
press the Start/Pause button.
3) Find out 12 Hexadecimal Address,
pressing Start/Pause buttons for 2
digit & text.
English - 58
YUKON-WIFI-03073U-03_EN.indd 58
2016-04-11
6:36:39
You can find it on your mobile app. (Refer to No.2 on page 56.)
10. After the registration of the washer is
completed, you can check the registered
washer on the device information list.
English - 59
YUKON-WIFI-03073U-03_EN.indd 59
2016-04-11
6:36:39
SMART CONTROL
6. Tap the ‘Washers/Dryers’ tab and enter the mac address. (Web)
7. Click the “Certify device”. (Web)
8. Turn the Cycle Selector until “PS” is displayed on the display panel and press the
Start/Pause button. (Washing Machine)
9. When certify device checking window comes on, click the “Ok”. (Web)
• If the washer you are registering is already registered by other users, a window will come
on asking whether you want to delete the usage authority of the existing users, or not.
smart control
Using the mobile app
Register the appliance on the Samsung Smart Appliance website first to control the washing
machine using the outdoor control function.
1. Press the Smart Control
button.
2. Tap the
“Outdoor control” tab.
3. Enter the ID and
password registered to
the website and tap the
Login button.
4. After logging in, the
model number of the
registered washing
machine appears in the
appliance list.
5. Select the model you want to control to
connect to the appliance.
6. Now you can use the Outdoor control function
for the washing machine.
Hereby, Samsung Electronics, declares that this washing machine is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
This equipment may be operated in all EU countries.
English - 60
YUKON-WIFI-03073U-03_EN.indd 60
2016-04-11
6:36:39
cleaning and maintaining your
washing machine
CLEANING THE EXTERIOR
CLEANING THE INTERIOR
Clean the interior of your Washer periodically to remove any dirt, soil, odour, mould, mildew, or bacterial
residue that may remain in your Washer as a result of washing clothes.
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent
stains on your Washer or laundry.
Hard water deposits may be removed, if needed. Use a cleaner labelled “Washer safe”.
CLEANING THE DISPENSERS
The automatic dispenser may need to be cleaned periodically due to laundry additive buildup.
1. Pull out the detergent liquid from detergent compartment.
2. Remove the siphon cap from the fabric softener and bleach
compartments.
3. Wash all of the parts under running water.
4. Clean the dispenser recess with a soft brush.
5. Reinsert the siphon cap and push it firmly into place.
6. Push the dispenser back into place.
7. Run a Rinse+Spin cycle without any load in your washer.
Siphon cap
English - 61
YUKON-WIFI-03073U-03_EN.indd Sec6:61
2016-04-11
6:36:40
CLEANING AND MAINTAINING
Turn off the water faucets after finishing the day’s washing.
This will shut off the water supply to your Washer and prevent the unlikely possibility of damage from
escaping water. Leave the door open to allow the inside of your Washer to dry out.
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended:
Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray
cleaners directly on the panel.
Cabinet – Clean with soap and water.
cleaning and maintaining your
washing machine
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare
your Washer for storage as follows:
• Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your Washer through the cycle
without a load.
• Turn the water faucets off and disconnect the inlet hoses.
• Unplug your Washer from the electrical outlet and leave your Washer door open to let air circulate inside the
tumbler.
• If your Washer has been stored in below–freezing temperatures, allow time for any leftover water in your
Washer to thaw out before use.
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “ND” error message is displayed.
1. Unplug the power cord of the washing machine from the main
socket.
Gently press the top area of the filter cover to open.
2. Unscrew the drain cap by turning it
counterclockwise.
3. Hold the cap on the end of the drain tube and
slowly pull it out about 6 inches (15 cm) and drain
off all the water.
Step 1
Step 2
4. Remove the debris filter cap.
5. Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
For models with the safety filter cap
To open, push in, and then turn the safety filter cap
counterclockwise. The spring in the cap will make opening the cap
easy.
• To close, turn the safety filter cap clockwise. As you turn the cap,
the spring will make a rattling sound. The rattling sound is normal.
•
English - 62
YUKON-WIFI-03073U-03_EN.indd Sec6:62
2016-04-11
6:36:40
CLEANING THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
seal/bellow
3. If stained areas are found, wipe down these areas of the seal/bellow, using the procedure
that follows.
a) Mix a dilute solution, using ¾ cup (177 mL) of liquid chlorine bleach, and 1 gal. (3.8 L) of
warm tap water.
b) Wipe the seal/bellow area with the dilute solution, using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door
open.
IMPORTANT:
• Wear rubber gloves when cleaning for prolonged periods.
• Refer to the bleach manufacturer’s instructions for proper use.
PRESERVING THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washing machine. Keep them on the
purchased pedestal or in a separate storage box. This may scratch or damage the top cover of the washing
machine.
Since the entire washing machine has a high-gloss finish, the surface can be scratched or damaged.
Therefore, avoid scratching or damaging the surface when using the washing machine.
English - 63
YUKON-WIFI-03073U-03_EN.indd Sec6:63
2016-04-11
6:36:41
CLEANING AND MAINTAINING
2. Inspect the gray colored seal/bellow between the door
opening and the basket for stained areas. Pull back the
seal/bellow to inspect all areas under the seal/bellow and to
check for foreign objects.
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
PROBLEM
SOLUTION
Will not start..
•
•
•
•
•
•
•
Has no water or not enough
water..
•
•
•
•
•
Make sure the door is firmly closed.
Make sure your Washer is plugged in.
Make sure the water source faucets are open.
Make sure to press the Start/Pause Button to start your Washer.
Make sure the Child Lock is not activated; see page 28.
Before your Washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
Check the fuse or reset the circuit breaker
Turn both faucets on fully.
Make sure the door is tightly closed.
Straighten the water inlet hoses.
Disconnect hoses and clean screens. Hose filter screens may be
clogged.
Open and close the door, then press the Start/Pause Button.
Has detergent remains in the
automatic dispenser after the
wash cycle is complete.
•
•
Make sure your Washer is running with sufficient water pressure.
Make sure the Detergent Selector dial is in the upper position when
using granular detergent.
Vibrates or is too noisy.
•
Make sure your Washer is set on a level surface. If the surface is not
level, adjust your Washer feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your Washer is not touching any other object.
Make sure the laundry load is balanced.
•
•
•
Stops
•
•
•
•
•
•
Plug the power cord into a live electrical outlet.
Check the fuse or reset the circuit breaker.
Close the door and press the Start/Pause Button to start your
Washer.
For your safety, your Washer will not tumble or spin unless the door is
closed.
Before your Washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
There may be a pause or soak period in the cycle. Wait briefly and it
may start.
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
English - 64
YUKON-WIFI-03073U-03_EN.indd Sec11:64
2016-04-11
6:36:41
PROBLEM
SOLUTION
Fills with the wrong
temperature water.
•
•
•
•
•
•
Door locked or will not
open.
•
•
•
Does not drain and/or spin.
•
•
•
•
Press the Start/Pause Button to stop your Washer.
Your Washer door will remain locked during the heating portion of the
Sanitize Cycle
It may take a few moments for the door lock mechanism to
disengage.
Check the fuse or reset the circuit breaker.
Straighten the drain hoses. Eliminate kinked hoses. If there is a drain
restriction, call for service.
Close the door and press the Start/Pause Button. For your safety,
your Washer will not tumble or spin unless the door is closed.
Make sure the debris filter is not clogged.
Load is too wet at the end
of the cycle.
•
•
•
Use the High or Extra High spin speed.
Use high efficiency detergent to reduce over–sudsing.
Load is too Small Load. Very Small Load loads (one or two items)
may become unbalanced and not spin out completely.
Leaks water.
•
•
•
Make sure the door is firmly closed.
Make sure all hose connections are tight.
Make sure the end of the drain hose is correctly inserted and secured
to the drainage system.
Avoid overloading.
Use high efficiency detergent to prevent over–sudsing.
•
•
Has excessive suds.
•
•
•
TROUBLESHOOTING
•
Turn both faucets on fully.
Make sure the temperature selection is correct.
Make sure the hoses are connected to the correct faucets.
Flush water lines.
Check the water heater. It should be set to deliver a minimum 120 °F
(49 °C) hot water at the tap. Also check the water heater capacity
and recovery rate.
Disconnect the hoses and clean the screens. The hose filter screens
may be plugged.
As your Washer is filling, the water temperature may change as
the automatic temperature control feature checks incoming water
temperature. This is normal.
While your Washer is filling, you may notice just hot and/or just
cold water going through the dispenser when cold or warm wash
temperatures are selected. This is a normal function of the automatic
temperature control feature as your Washer determines the
temperature of the water.
Use high efficiency detergent to prevent over-sudsing.
Reduce the detergent amount for soft water, Small Load or lightly
soiled loads.
Non-HE detergent is NOT recommended.
If the problem persists, contact your local Samsung Customer Service.
English - 65
YUKON-WIFI-03073U-03_EN.indd Sec11:65
2016-04-11
6:36:41
troubleshooting and
information codes
INFORMATION CODES
If your washing machine malfunctions, you may see an information code on the display. If this happens,
please check the table below and try the suggested solution before calling Customer Service.
CODE SYMBOL
SOLUTION
dE
•
Close the door.
4E
•
•
Make sure the source water tap is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of jeans, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
•
It appears when the internal temperature of the drum is high. The fan will
automatically function, so just wait until “Hot” indication disappeared.
UE
cE/3E
Hot
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
English - 66
YUKON-WIFI-03073U-03_EN.indd Sec11:66
2016-04-11
6:36:41
cycle chart
CYCLE CHART
( default option,  user option)
Functions
PROGRAM
Temp.
Rinse
Spin
30 ˚C
40 ˚C
60 ˚C
95 ˚C
1
2
3
4
5
no spin
400
800
1000
1200
-
-
-
-
-
-
-
-
-


-

Deodorization
-
-
Wool



-



-
Cotton















Power Bubble














Outdoor Care


-
-
-



-
-


-
-
Baby Care














-
Water Saving











-
-










Quick Wash












Bedding











-
-
Synthetics














Drum Clean
-
-
-

-

-
-

Rinse + Spin
-

-
-
-
-

-
-
-
Drying
Sanitization
-
Option
PROGRAM
Pre Wash
My Cycle
Garment+
Delay End
Sound Off
-
-






Wool
-




Cotton





Power Bubble





Outdoor Care
-





Drying
Sanitization
Deodorization
Baby Care




Water Saving





Rinse + Spin




Quick Wash
-




Bedding





Synthetics





Drum Clean
-
-
-


1. A cycle with a prewash takes approx. 20 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN 60456.
3. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
English - 67
YUKON-WIFI-03073U-03_EN.indd Sec7:67
2016-04-11
6:36:41
CYCLE CHART
Cold
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures
consistency among garment manufacturers of domestic and imported items. Follow the care label
directions to maximize garment life and reduce laundery problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured in part from recyclable materials. If you decide to dispose of this
appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance
cannot be connected to a power source. Remove the door so that animals and Small Load children
cannot get trapped inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manufactures’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
English - 68
YUKON-WIFI-03073U-03_EN.indd Sec3:68
2016-04-11
6:36:41
SPECIFICATIONS
TYPE
FRONT LOADING WASHING MACHINE
WD10F7S7SRP
DIMENSIONS
APPENDIX
W686mm X D820mm X H984mm
WATER PRESSURE
137 kPa ~ 800 kPa
NET WEIGHT
102 kg
WASH AND SPIN CAPACITY
10.0 kg [DRY LAUNDRY]
DRY CAPACITY
POWER
CONSUMPTION
7.0 kg
WASHING
230 V
250 W
WASH AND
HEATING
230 V
2200 W
DRYING
230V
2200W
SPIN
220V
30 W
PAPER
1.3 kg
PLASTIC
1.8 kg
rpm
1200
PACKAGE WEIGHT
SPIN
REVOLUTIONS
600 W
PUMPING
The appearance and specifications of the product are subject to change without prior notice for purposes
of product enhancement.
English - 69
YUKON-WIFI-03073U-03_EN.indd Sec3:69
2016-04-11
6:36:44
appendix
OPEN SOURCE ANNOUNCEMENT
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL.
You may obtain the complete Corresponding Source code from us for a period of three years after our last
shipment of this product by sending email to:
oss.request@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM,
the cost of physically performing source distribution may be charged.
This offer is valid to anyone in receipt of this information.
GPL Software:
Bridge-Utils, BusyBox, DNRD, dosfstools, iproute2, IPTables, Linux Kernel, ntpclient, Open1x, RSDK
toolchain, rtl819x - Bootloader, samba, squashfs, udhcp Server-Client Package, USB-ModeSwitch,
wireless-tools
LGPL Software:
libnl-Netlink Library, Mini-XML
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change
it. By contrast, the GNU General Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users. This General Public
License applies to most of the Free Software Foundation’s software and to any other program
whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.)
You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new free programs; and that you
know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you
if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or can
get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors’ reputations.
English - 70
YUKON-WIFI-03073U-03_EN.indd Sec3:70
2016-04-11
6:36:44
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must be
licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
1. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The “Program”, below, refers to any such program or work, and a “work based on the
Program” means either the Program or any derivative work under copyright law: that is to
say, a work containing the Program or a portion of it, either verbatim or with modifications
and/or translated into another language. (Hereinafter, translation is included without limitation
in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output
from the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on
what the Program does.
2. You may copy and distribute verbatim copies of the Program’s source code as you receive
it, in any medium, provided that you conspicuously and appropriately publish on each copy
an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
3. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute such modifications or work under the terms
of Section 1 above, provided that you also meet all of these conditions:
1) You must cause the modified files to carry prominent notices stating that you changed
the files and the date of any change.
2) You must cause any work that you distribute or publish, that in whole or in part contains
or is derived from the Program or any part thereof, to be licensed as a whole at no charge
to all third parties under the terms of this License.
3) If the modified program normally reads commands interactively when run, you must
cause it, when started running for such interactive use in the most ordinary way, to print
or display an announcement including an appropriate copyright notice and a notice that
there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent
and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the
whole must be on the terms of this License, whose permissions for other licensees extend to
the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
English - 71
YUKON-WIFI-03073U-03_EN.indd Sec3:71
2016-04-11
6:36:44
APPENDIX
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
appendix
4.
5.
6.
7.
8.
or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program
(or with a work based on the Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
also do one of the following:
1) Accompany it with the complete corresponding machinereadable source code, which
must be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
2) Accompany it with a written offer, valid for at least three years, to give any third party,
for a charge no more than your cost of physically performing source distribution, a
complete machine-readable copy of the corresponding source code, to be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or, c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications
to it. For an executable work, complete source code means all the source code for all
modules it contains, plus any associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a special exception,
the source code distributed need not include anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not compelled
to copy the source
along with the object code.
You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions
on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then
as a consequence you may not distribute the Program at all. For example, if a patent license
English - 72
YUKON-WIFI-03073U-03_EN.indd Sec3:72
2016-04-11
6:36:44
NO WARRANTY
12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOV E , BE L I ABL E TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
English - 73
YUKON-WIFI-03073U-03_EN.indd Sec3:73
2016-04-11
6:36:44
APPENDIX
would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide range
of software distributed through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of
the rest of this License.
9. If the distribution and/or use of the Program is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
10. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and “any later version”, you have the option of
following the terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
11. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
appendix
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public,
the best way to achieve this is to make it free software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively convey the exclusion of warranty; and each file should have at
least the “copyright” line and a pointer to where the full notice is found.
one line to give the program’s name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive
mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with
ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are
welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the
General Public License. Of course, the commands you use may be called something other than
`show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your
program. You should also get your employer (if you work as a programmer) or your school, if any,
to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which
makes passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser
General Public License instead of this License.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is
not allowed.
English - 74
YUKON-WIFI-03073U-03_EN.indd Sec3:74
2016-04-11
6:36:44
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library
Public License, version 2, hence the version number 2.1.]
Preamble
English - 75
YUKON-WIFI-03073U-03_EN.indd Sec3:75
2016-04-11
6:36:44
APPENDIX
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any particular case, based on
the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish); that you receive source code or can get it if you
want it; that you can change the software and use pieces of it in new free programs; and that
you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you
these rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You must make sure that they, too, receive or can get
the source code. If you link other code with the library, you must provide complete object files
to the recipients, so that they can relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that the original author’s reputation will
not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to
make sure that a company cannot effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a
version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public License. We use this license for
certain libraries in order to permit linking those libraries into nonfree programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original library.
The ordinary General Public License therefore permits such linking only if the entire combination
fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking
other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the
user’s freedom than the ordinary General Public License. It also provides other free software
developers Less of an advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible
use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library.
appendix
A more frequent case is that a free library does the same job as widely used non-free libraries.
In this case, there is little to gain by limiting the free library to free software only, so we use the
Lesser General Public License.
In other cases, permission to use a particular library in nonfree programs enables a greater
number of people to use a large body of free software. For example, permission to use the GNU
C Library in non-free programs enables many more people to use the whole GNU operating
system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does
ensure that the user of a program that is linked with the Library has the freedom and the
wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a “work based on the library” and a “work that uses the
library”. The former contains code derived from the library, whereas the latter must be combined
with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
1. This License Agreement applies to any software library or other program which contains a
notice placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also called “this License”). Each
licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and data)
to form executables.
The “Library”, below, refers to any such software library or work which has been distributed
under these terms. A “work based on the Library” means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to
it. For a library, complete source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted,
and output from such a program is covered only if its contents constitute a work based on
the Library (independent of the use of the Library in a tool for writing it).
Whether that is true depends on what the Library does and what the program that uses the
Library does.
2. You may copy and distribute verbatim copies of the Library’s complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices
that refer to this License and to the absence of any warranty; and distribute a copy of this
License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
3. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:
1) The modified work must itself be a software library.
2) You must cause the files modified to carry prominent notices stating that you changed
the files and the date of any change.
English - 76
YUKON-WIFI-03073U-03_EN.indd Sec3:76
2016-04-11
6:36:44
English - 77
YUKON-WIFI-03073U-03_EN.indd Sec3:77
2016-04-11
6:36:44
APPENDIX
3) You must cause the whole of the work to be licensed at no charge to all third parties
under the terms of this License.
4) If a facility in the modified Library refers to a function or a table of data to be supplied by
an application program that uses the facility, other than as an argument passed when the
facility is invoked, then you must make a good faith effort to ensure that, in the event an
application does not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d requires that
any application-supplied function or table used by this function must be optional: if the
application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Library, and can be reasonably considered independent
and separate works in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the
whole must be on the terms of this License, whose permissions for other licensees extend to
the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not
the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective
works based on the Library. In addition, mere aggregation of another work not based on
the Library with the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
4. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General Public License, version 2, instead
of to this License. (If a newer version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make
any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program
that is not a library.
5. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to
copy the source along with the object code.
6. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a “work that uses the Library”.
Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the
scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that
is a derivative of the Library (because it contains portions of the Library), rather than a “work
that uses the library”. The executable is therefore covered by this License. Section 6 states
terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the
Library, the object code for the work may be a derivative work of the Library even though
appendix
the source code is not. Whether this is true is especially significant if the work can be linked
without the Library, or if the work is itself a library. The threshold for this to be true is not
precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors,
and small macros and small inline functions (ten lines or less in length), then the use of the
object file is unrestricted, regardless of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for
the work under the terms of Section 6. Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the Library itself.
7. As an exception to the Sections above, you may also combine or link a “work that uses the
Library” with the Library to produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms permit modification of the work
for the customer’s own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it
and that the Library and its use are covered by this License. You must supply a copy of
this License. If the work during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
1) Accompany the work wi th the complet e corresponding machine-readable source
code for the Library including whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work is an executable linked with
the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to
produce a modified executable containing the modified Library. (It is understood that the
user who changes the contents of definitions files in the Library will not necessarily be
able to recompile the application to use the modified definitions.)
2) Use a suitable shared library mechanism for linking with the Library. A suitable
mechanism is one that (1) uses at run time a copy of the library already present on the
user’s computer system, rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if the user installs one, as long
as the modified version is interfacecompatible with the version that the work was made
with.
3) Accompany the work with a written offer, valid for at least three years, to give the same
user the materials specified in Subsection 6a, above, for a charge no more than the cost
of performing this distribution.
4) If distribution of the work is made by offering access to copy from a designated place,
offer equivalent access to copy the above specified materials from the same place.
5) Verify that the user has already received a copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any
data and utility programs needed for reproducing the executable from it. However, as a
special exception, the materials to be distributed need not include anything that is normally
distributed (in either source or binary form) with the major components (compiler, kernel, and
so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an executable that you distribute.
8. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such
a combined library, provided that the separate distribution of the work based on the Library
and of the other library facilities is otherwise permitted, and provided that you do these two
English - 78
YUKON-WIFI-03073U-03_EN.indd Sec3:78
2016-04-11
6:36:44
English - 79
YUKON-WIFI-03073U-03_EN.indd Sec3:79
2016-04-11
6:36:44
APPENDIX
things:
1) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of
the Sections above.
2) Give prominent notice with the combined library of the fact that part of it is a work based
on the Library, and explaining where to find the accompanying uncombined form of the
same work.
9. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
10. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
11. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or
modify the Library subject to these terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
12. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then
as a consequence you may not distribute the Library at all. For example, if a patent license
would not permit royalty-free redistribution of the Library by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system which is implemented by
public license practices.
Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of
the rest of this License.
13. If the distribution and/or use of the Library is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
14. The Free Software Foundation may publish revised and/or new versions of the Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns.
appendix
Each version is given a distinguishing version number.
If the Library specifies a version number of this License which applies to it and “any later
version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify
a license version number, you may choose any version ever published by the Free Software
Foundation.
15. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
16. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
17. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRI T ING
WI L L ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries If you develop a new library, and you want
it to be of the greatest possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting redistribution under these
terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the
start of each source file to most effectively convey the exclusion of warranty; and each file should
have at least the “copyright” line and a pointer to where the full notice is found.
one line to give the library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/or modify it under the terms of the GNU
Lesser General Public License as published by the Free Software Foundation; either version 2.1
of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU
Lesser General Public License for more details.
English - 80
YUKON-WIFI-03073U-03_EN.indd Sec3:80
2016-04-11
6:36:44
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
BSD LICENSE
flex: the fast lexical analyser
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007
The Flex Project.
Copyright (c) 1990, 1997 The Regents of the University of California. All rights reserved.
LibNet License
Copyright (c) 1998 - 2001 Mike D. Schiffman <mike@infonexus.com>
PPP/ Debian
Copyright (c) 1989 Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the <organization> nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES ( INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
English - 81
YUKON-WIFI-03073U-03_EN.indd Sec3:81
2016-04-11
6:36:44
APPENDIX
You should have received a copy of the GNU Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne,
Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs)
written by James Random Hacker.
appendix
OPENSSL
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
LICENSE ISSUES
=====================================================================
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License
and the original SSLeay license apply to the toolkit. See below for the actual license texts.
Actually both licenses are BSD-style Open Source licenses. In case of any license issues related
to OpenSSL please contact openssl-core@openssl.org.
OpenSSL License
=====================================================================
Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment: “This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL”
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=====================================================================
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This
product includes software written by Tim Hudson (tjh@cryptsoft.com).
English - 82
YUKON-WIFI-03073U-03_EN.indd Sec3:82
2016-04-11
6:36:44
memo
YUKON-WIFI-03073U-03_EN.indd Sec3:83
2016-04-11
6:36:44
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
AUSTRALIA
1300 362 603
www.samsung.com/au/support
DC68-03073U-03
YUKON-WIFI-03073U-03_EN.indd Sec3:84
2016-04-11
6:36:44
Download PDF

advertising