Samsung | MX-JS5000 | Samsung MX-JS5000 User Manual

MX-JS5000
MX-JS5500
MINI HI-FI Component Audio System
(MP3/WMA/CD-DA Playback with CD/USB)
user's manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
02793H-MX-JS5000-ZC-ENG-20160331.indd 1
2016/4/13 8:51:56
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
This symbol indicates “dangerous
voltage” inside the product that presents
a risk of electric shock or personal injury.
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND INSERT FULLY.
This symbol indicates important
instructions accompanying the product.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
WARNING
• TO PREVENT
THE SPREAD OF
FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
Class II product : This symbol indicates that a safety connection to electrical earth (ground)
is not required.
AC voltage : Rated voltage marked with this symbol is AC voltage.
DC voltage : Rated voltage marked with this symbol is DC voltage.
Caution. Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
2
02793H-MX-JS5000-ZC-ENG-20160331.indd 2
English
2016/4/13 8:51:57
This Class B digital apparatus complies
with Canadian ICES-003.
FCC Radiation Exposure Statement
This equipment complies with IC RSS-102
radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and
operated with minimum distance 20cm
between the radiator & your body.
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below. Keep these operating instructions
handy for future reference.
1. Read these instructions.
2. Keep these Instructions.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
Safety Information
This equipment complies with Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference
that may cause undesired operation of the
device.
This device and its antenna(s) must not be
co-located or operation in conjunction with
any other antenna or transmitter.
This device may automatically discontinue
transmission if there is no information to
transmit, or an operational
failure. Note that this is not intended to
prohibit the transmission of control or
signaling information or the use of
repetitive codes where required by the
technology.
01
5. Do not use this apparatus near water.
CAUTION (for Canada)
10. Protect the power cord from
being walked on or pinched
particularly at plugs,
convenience receptacles,
and the point where they
exit from the apparatus.
11. Only use attachments accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when it will be unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
3. Heed all warnings.
4. Follow all instructions.
3
02793H-MX-JS5000-ZC-ENG-20160331.indd 3
English
2016/4/13 8:51:58
Safety Information
Precautions
• Ensure that the AC power in your house
matches the requirements listed on the
identification sticker located on the back of your
product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc tray
is empty.
• To turn off the product completely, disconnect
the AC plug from the wall outlet. Disconnect the
AC plug from the wall outlet if you will be leaving
the device unused for a long period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
• Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
• Protect the product from moisture, and excess
heat or equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC supply
if the product malfunctions.
• Your product is not intended for industrial use. It
is for personal use only.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
4
02793H-MX-JS5000-ZC-ENG-20160331.indd 4
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
• An improper ground may cause electric shock
or equipment damage. (Class l Equipment only.)
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on a disc may
reduce sound and picture quality or cause
skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a disc, clean
it with a mild detergent diluted in
water and wipe with a soft cloth.
-- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool, ventilated area.
`` Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm
air comes into contact with cold
parts inside the product. When
condensation forms inside the
product, it may not operate correctly. If this
occurs, remove any discs in the product, and
then let the product stand for 1 or 2 hours with
the power on.
English
2016/4/13 8:51:58
Disc and Format Compatibility
Supported Audio Formats
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CDRecorder or PC) used to burn music onto the
disc and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be fully
played. If the session is closed, but the disc is left
open, the product may not be able to fully play the
disc.
*.mp3
*.wma
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (for example, /, =, +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only consecutively written multisession discs
can be played. If there is a blank segment in a
Multisession disc, the disc can be played only
up to the blank segment.
• If a disc is not closed, it will take longer to begin
playback and not all of the recorded files may
play.
• If a file is encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and high
bit rate - 32Kbps ~ 320Kbps), the sound may skip
during playback.
• A maximum of 999 files can be played per CD/
USB device.
02793H-MX-JS5000-ZC-ENG-20160331.indd 5
Sampling
Rate
Bit
Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
||NOTES |
MP3-CD Discs
5
Audio
Codec
Safety Information
File
Extension
01
This product does not support Secure (DRM)
Media files.
✎✎ Does not support the WMA Professional
codec.
✎✎ The table above shows supported formats,
sampling rates, and bit rates. Files recorded
in formats that are not supported may not be
played properly.
English
2016/4/13 8:51:58
Contents
SAFETY INFORMATION
2
Warning
4
Precautions
4
Disc Storage & Management
5
Disc And Format Compatibility
17
17
18
18
19
GETTING STARTED
7
Front Panel
8
Rear Panel
9
Accessories
10
Remote Control
19
20
Connecting the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
To disconnect the TV from the Hi-Fi
Component
To disconnect the Hi-Fi Component from
the TV
Using My Karaoke
20
Auto Change Function
21
Listening to the Radio
21
21
21
To Store the Stations You Want
Selecting a Stored Station
Timer Function
19
9
FUNCTIONS
To disconnect the Bluetooth device from
the Hi-Fi Component
To disconnect the Hi-Fi Component from
the Bluetooth device
Using Bluetooth Power On
Using Samsung Audio Remote App
TV SoundConnect
11
The Display function
11
Playing a CD
11
11
12
12
Loading a Compact Disc
CD/MP3/CD-R Playback
Selecting a Track
Searching for a Specific Music Passage on
a CD
Repeat One or All Tracks on a CD
Playing USB Devices
21
21
23
23
Setting the Clock
Setting the Timer
Cancelling the Timer
The Recording Function
USB Device Playback
To Select a File from a USB Device
To Search a Folder Quickly
To Use High Speed Search
To Delete a File
To safely remove a USB device
Read Before Connecting USB Storage
Devices
Searching for a Track Quickly
Using the My List Function
Checking or Editing My List Tracks
Bluetooth
23
24
25
Basic Recording
Recording Speed
Special Sound Effects
25
25
25
26
26
26
12
13
13
13
13
13
14
14
14
14
15
15
16
16
16
Selecting PRESET EQ Mode
Selecting USER EQ Mode
FOOTBALL MODE function
GIGA MODE Function
NON-STOP RELAY Function
Software update
APPENDIX
27
Troubleshooting
28
Specifications
What is Bluetooth?
To connect the Hi-Fi Component to a
Bluetooth device
6
02793H-MX-JS5000-ZC-ENG-20160331.indd 6
English
2016/4/13 8:51:59
Getting Started
Front Panel
1 2 34
5 67
02
8
k
j
i
h
g
9
0
!
@
#
f e dc b a
)( *& ^
%
$
1
AUX 1/2 button
a
SEARCH button
2
FOLDER - button
b
CD button
3
Display Panel
c
BACKWARD SEARCH/SKIP button
4
VOLUME/JOG
d
STOP button
5
FOLDER + button
e
MIC 2 jack
6
TUNER button
f
MIC 1 jack
7
PLAY/PAUSE button
g
AUTO CHANGE button
POWER button
Press this button to switch your product
on or off.
h
FOOTBALL MODE button
8
i
DISPLAY / DEMO button
9
TV SOUND CONNECT button
j
USER EQ button
0
Bluetooth button
!
MY LIST button
@
USB REC button
#
USB 1/2 button
$
USB 2 jack for Playing and USB Recording
%
USB 1 jack for Playback only
^
FORWARD SEARCH/SKIP button
&
OPEN/CLOSE button
*
MEMORY button
(
DISC slot
)
ENTER button
7
02793H-MX-JS5000-ZC-ENG-20160331.indd 7
Getting Started
l
k
PRESET EQ button
l
GIGA SOUND BLAST button
English
2016/4/13 8:51:59
Getting Started
Rear Panel
MX-JS5000
7
6
1
2
3
5
4
MX-JS5500
7
6
1
2
3
5
4
AUX IN 1 Terminals
1. Use an audio cable with a 1/8th inch stereo plug
1
(not supplied) to connect an external device
such as an MP3 player to the product.
• Connect AUX IN 1 on the rear panel of the
product to the Audio Out of an external
device/MP3 player.
• Press the AUX 1/2 button to select AUX1.
FM Antenna Terminals
3
2.
3.
4.0 CH Speaker Terminals (MX-JS5000)
4.1CH Speaker Terminals (MX-JS5500)
5
1. Use an Audio Cable (not supplied) to connect
AUX IN 2 on the product to Audio Out on the
external analog output device.
• Be sure to match connector colors.
• If the external analog output device has only
one Audio Out jack, connect either left or right
terminal.
• Press the AUX 1/2 button to select the AUX 2.
• When the product is in AUX mode, if no
buttons are pushed for 8 hours, the power will
automatically turn off.
1.
ONLY FOR SERVICE
This jack is for service only. Please do not use.
1. To achieve the correct sound quality, when
AUX IN 2 Terminals
2
4
you connect the speakers, match the color
of the speaker plugs to the color of the
speaker jacks.
• LEFT channel (marked
).
• RIGHT channel (marked
).
• Front and Tweeter speakers together.
• Don't force the Purple SUBWOOFER
connector or into the White or Red speaker
jack.
6
POWER
• Insert only provided power cable.
7
Cooling fan
• The fan operates most of the time while the
unit is powered on.
However, if you set the unit to its minimum
volume, the fan won't operate.
Provide a minimum of 4 inches (10 cm) of
clear space on all sides of the fan when you
install the product.
Connect the FM antenna to the FM antenna
connector terminal.
Slowly move the antenna wire until you find a location
where reception is good, then fasten it to a wall or other
rigid surface.
If reception is poor, you may need to install an outdoor
antenna. To do so, connect an outdoor FM antenna
to the FM jack on the rear of the system using a 75Ω
coaxial cable (not supplied).
8
02793H-MX-JS5000-ZC-ENG-20160331.indd 8
English
2016/4/13 8:52:00
Accessories
02
Check for the supplied accessories below.
Getting Started
User Manual
Remote Control / Batteries
FM Antenna
Power Cable
• Figures and illustrations in this user's manual are provided for reference only and may differ from actual
product appearance.
9
02793H-MX-JS5000-ZC-ENG-20160331.indd 9
English
2016/4/13 8:52:01
Getting Started
Remote Control
MUTE (Turn off the sound temporarily. Press
again to turn the sound back on.)
Power
CD OPEN/CLOSE
Bluetooth
CD
TV SoundConnect
USB REC
REC SPEED
USB
TUNING MODE
TUNER
MO/ST
NON-STOP MUSIC RELAY
DISPLAY
AUX
MEMORY
USER EQ
SEARCH
PRESET EQ
TUNING/SKIP
PLAY/PAUSE
STOP
REPEAT
GIGA
AUTO CHANGE
FOOTBALL
VOLUME (–, +)
ENTER
,,.
FOLDER +/-/EFFECT +/SEARCH
SLEEP (Set a sleep time to shut off the
product.)
MY LIST
TIMER SET
TIMER ON/OFF
BEAT WAVING (This function is not
available on this product.)
DELETE
MIC VOLUME –, +
MY KARAOKE
Installing Batteries In The Remote Control
• Place batteries in the remote control so that the
polarities match the illustrations in the battery
compartment : (+) to (+) and (–) to (–).
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat
the batteries.
• There is the danger of an explosion if you
replace the batteries with the wrong battery
type. Replace only with the same or equivalent
type.
• The remote control can be used up to
approximately 23 feet (7 meters) in a straight
line from the system.
10
02793H-MX-JS5000-ZC-ENG-20160331.indd 10
English
2016/4/13 8:52:01
The Display function
Playing a CD
Press the DISPLAY/DEMO button on the product.
Each time you press this button, the mode will change as
follows:
• The DEMO function
The "xxxxW MiNi COMPONENT AUDIO SYSTEM" is
displayed. The "xxxx" will be different depending on
your Model.
• The Dimmer function
The Dimmer function is selected and the display
darkens.
• OFF-LED
The LEDs are turned off. However, the dimmer function
continues to work.
• Clock ON
The Clock is displayed.
• Display/LED ON
The Display and all LEDs are turned on.
The DEMO MUSIC function
You can play standard compact discs that
require no adapter.
1. Place a disc gently into the disc tray with the
disc's label facing up. The disc will be played
automatically.
• You can load or unload compact discs
when the radio, USB, or auxiliary source
function is selected. When you press the
OPEN/CLOSE button, the unit will exit the
current function and enter CD mode.
Functions
Changing Display mode
Loading a Compact Disc
03
You can view available functions on the display,
adjust the brightness of the display, and set the
Display/LED either on or off.
• If no buttons are pressed on the product
or remote control for more than 3 minutes
when the product is in Pause mode, it will
change to Stop mode.
• If no buttons are pressed on the product
or remote control for more than 25 minutes
when the product is in Stop mode, the
product will turn off.
CD/MP3/CD-R Playback
Press the DISPLAY/DEMO button on the product or the
DISPLAY button on the remote control for 10 seconds to
turn on the Demo mode.
Each time you press this button, the mode will change as
follows:
DIMMER ; OFF-LED ; --:-- [time display] ; ON-LED
;DEMO
To cancel the Demo music mode
• Press the DISPLAY/DEMO button on the product or
DISPLAY on the remote control for 10 seconds again.
The current mode is cancelled and the product is
turned off.
• Press the TUNER,AUX 1/2, CD,Bluetooth, TV SOUND
CONNECT, or USB button on the product.
The current mode is cancelled and the mode is
changed to the mode you selected.
||IMPORTANT |
✎✎ This product is designed to play the following
audio disc types: CD, CD-R, CD-RW.
1. Place a disc gently into the disc tray with the
disc's label facing up.
2. The disc will be played automatically.
• For MP3/WMA file, it may take several
minutes for the product to finish scanning
the disc tracks.
• If you play a file with an English title, the
song title will be shown in the display. (Titles
in other languages can not be displayed.)
• An English-titled track containing a
special character (@, $, *, etc.) will not be
displayed.
||NOTES |
✎✎ When the Demo mode is on, only the POWER (
)
button, VOL buttons, MUTE button, and the buttons
mentioned above work.
✎✎ The DEMO sampler plays for about 3 minutes. When
DEMO sampler play is complete, the DEMO message
will remain in the display on the front panel until you
cancel DEMO mode.
11
02793H-MX-JS5000-ZC-ENG-20160331.indd 11
<CD PlaybackDisplay>
Track Indicator
1 0:19
Playtime Indicator
English
2016/4/13 8:52:02
Functions
3.
To adjust the volume:
• Turn the VOLUME control on the product.
• Press the VOL+ or VOL- button on the
remote control.
The volume level can be adjust in 31 steps
(VOLUME MIN, VOLUME 01 ~ VOLUME
29, and VOLUME MAX).
4. Pausing playback on the Main Unit
To pause playback temporarily, press the
button.
Press
again to continue playing the disc.
Remote control
To pause playback temporarily, press the
button.
Press the
button to continue playing the
disc.
5. To end playing, press the 5 button.
||NOTES |
✎✎ If no CD is in the disc slot, “NO DISC” appears
on the display.
✎✎ The quality of MP3/CD-R playback may vary
depending on the condition of the disc or the
condition of the recorder used to record the
disc.
✎✎ If a disc contains different types of files or
unnecessary folders, you will have problems
with playback.
✎✎ Gently place a CD into the disc slot. Do not
apply excessive force.
-- Do not apply force to the product or place a
heavy object on the product.
-- Do not place an out-of-spec or oddly
shaped CD (heart shaped, octangular, etc.).
It may damage the product.
-- Carefully maintain your CDs.
Selecting a Track
You can select a desired track while the disc is
being played.
To play the next track
Press the 2 button.
To play the current track from the
beginning
Press the 1 button 3 seconds after the current
track started playing.
To play the track of your choice
Press the 1 or 2 button to move to a desired
track.
• You can select a track directly without the [ or
] button. (refer to the page 15)
Searching for a Specific Music Passage
on a CD
When listening to a CD, you can quickly search for
a specific music passage on a track.
Forward Search.....................3
Backward Search..................4
Press ...
3
CDDA
MP3/WMA
(1➞(2➞(3➞(4
(4
4
)1➞)2➞)3➞)4
)4
You can also press and hold the 1, 2 buttons
on the product to automatically scan for a track.
• The product does not play audio when in the (
,) 3 or ( ,) 4 fast search mode.
Repeat One or All Tracks on a CD
You can play a CD or tracks on a CD repeatedly.
1. Press the REPEAT button.
Each time you press this button, the mode
changes as follows:
MP3/WMA : OFF; TRACK ; DIR ; ALL ;
RANDOM
CD : OFF; TRACK ; ALL ; RANDOM
To play the previous track
Press the 1 button within 3 seconds after the
current track has started playing.
Press the 1 button twice 3 seconds or more
after the current track starts playing.
12
02793H-MX-JS5000-ZC-ENG-20160331.indd 12
English
2016/4/13 8:52:02
• TRACK : Repeatedly plays the selected track.
• DIR (DIRECTORY) : Repeatedly plays all tracks
in the selected folder.
• ALL : Repeatedly plays the entire disc.
• RANDOM : Plays tracks in random order.
Playing USB Devices
1. P
ress the REPEAT button.
Each time you press this button, the mode
changes as follows:
OFF ; TRACK ; DIR ; ALL ; RANDOM
2. W
hen you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF : Cancels repeat playback.
• TRACK : Repeatedly plays the selected
file.
Connect an external storage device such as a USB flash
memory stick or external HDD (Hard Disk Drive) to the
product. You can play files in MP3/WMA format.
• DIR (DIRECTORY) : Repeatedly plays all
files in the selected folder.
• ALL : Repeatedly plays all files.
USB Device Playback
1. Connect the external USB storage device to
your product.
2. Select the USB mode by pressing the button
on the product or the USB button on the
remote control.
3. The first file of the first directory plays
automatically.
Functions
• OFF : Cancels repeat playback.
To repeat one or all tracks
03
2. When you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• RANDOM : Plays files in random order.
||NOTE |
✎✎ For Random play: If the file you selected to play is
located in a folder, all the files in that folder are played
in random order. If the file you selected is located in
the root folder, all files in the root folder will be played
in random order.
To Search a Folder Quickly
4. T
o stop playing
Press the 5 button to stop playing.
1. P
ress the
or
button on the remote
control to move to the previous/next folder.
||NOTE |
✎✎ To remove the USB device
If you press the 5 button again, you can remove
the USB device safely.
2. W
hen the search is done, you will see the
previous/next folder name. The first track in
the folder will start playing.
||IMPORTANT |
✎✎ Do not connect a USB recharger to the USB port of
To Use High Speed Search
this product. You can damage the product.
To Select a File from a USB Device
You can select an MP3 file while the product is
playing.
||NOTES |
✎✎ If you want to move to the previous/next track, press
the 1, 2 buttons briefly.
-- The unit moves to the previous/next file within the
directory.
✎✎ If you press the 1, 2 buttons more times than the
You can search through a section quickly while the
product is playing.
Press the 3, 4 button.
• Each time you press the button, you move
forward/backward quickly through the section.
||IMPORTANT |
✎✎ The product does not output sound during a high
speed search.
✎✎ You can also press and hold the 1 or 2 button
on the main unit to automatically scan for a
track.
number of the files in the directory, the unit moves to
the next directory.
13
02793H-MX-JS5000-ZC-ENG-20160331.indd 13
English
2016/4/13 8:52:03
Functions
To Delete a File
You can delete a file from your USB device.
1. Select a file you want to delete.
2. Press the DELETE button on the remote
control. "DEL N" is displayed.
3. Press the DELETE button on the remote
control or press the 1, 2 until "DEL Y" is
displayed.
4. When “DEL Y” is displayed, press the ¬
button. “DELETE END” appears and the
deletion is completed.
||NOTE |
✎✎ The NTFS file system are not supported.
To safely remove a USB device
1. Press the 5 button twice while the USB is
playing or press the 5 button once when
play has stopped.
2. When the REMOVE message appears on the
display, remove the USB device.
• Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB or
more removable HDD may not be supported.
• It can take several minutes for the product to recognize
the files on some USB devices.
• Some USB devices (USB HDDs, in particular) may
pause when moving from track to track.
• With USB storage devices supporting USB VER1.1
only, the product may access files slowly or may not
recognize the file properties.
• The maximum electrical current provided by each USB
port to connected USB devices is 0.5A (based on DC
5V).
• If there is no USB connection or the STOP mode lasts
for more than 25 minutes, the product will automatically
turn off.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones may not
be supported.
• A maximum of 999 files can be played per USB device.
Searching for a Track Quickly
You can select a track directly without the 1, 2
button.
CDDA/MP3-CD/USB
Read Before Connecting USB Storage
Devices
1. Press the SEARCH button. After pressing the
• Some USB devices may not work properly with this
SEARCH button, press the , or . button
product. The maximum current supported by the USB
on the remote control or turn the VOLUME/
port for an external device is 500 mA (at 5V DC).
JOG control on the product to the left or right
• This product only supports external HDD`s that are
to select a desired track.
formatted in the FAT 16,FAT 32 file system.
• You can move to the selected track directly.
• USB 2.0 HDDs should be connected to a separate
power source. Otherwise, the USB 2.0 HDDs will not
2.
When the search is complete, the track will
work.
automatically start playing.
• If multiple USB external storage devices are connected
together, only the files in the first HDD will be played.
<Search Display>
• If a usb external device that has multi partition,only
the first partition which support file system is
Total track
Selected Track
recognized.
Indicator
Indicator
• Files with DRM are not supported. Digital Right
Management (DRM) restricts unauthorized access to
a DRM file so that the file is protected from piracy.
• Even if a file has an .mp3 extension, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of an audio file name are
shown on the product's display.
0 12 0 25
14
02793H-MX-JS5000-ZC-ENG-20160331.indd 14
English
2016/4/13 8:52:03
Using the My List Function
My List of the USB 2 will be cancelled.
This function is available during playback of a CDDA
or MP3/WMA file on a CD-ROM/USB device.
1. P
ress the MY LIST button to display the
message below:.
Checking or Editing My List Tracks
You can check and edit a list of My List tracks.
Functions
• You can use the My List function to set up the playback
order of up to 99 tracks of your choice.
03
• In CD/USB ON-MY LIST mode, if you press the
USB REC, SEARCH, DELETE, or
or
buttons, these functions will not work, and the unit
will display "MY LIST PLAY".
1. If a My List track is being played, press the
MY LIST button.
L0 1 -(01= My List number, -- = track number)
2. Use the VOLUME/JOG control on the main
unit or use the 1 or 2 or , , . buttons to
move to a desired track.
• Turn the VOLUME/JOG Control left or right
on the main unit to move to the previous/
next track.
• Press 1 ,. to move to the previous track.
• Press 2 ,, to move to the next track.
3. Press the ¬ button to confirm your
selection. The selection is stored and L0 2 -- is displayed.
4. To select another track, follow Steps 2 and 3
above.
5. Press the
button or press the MY LIST
button on the remote control to play the My List
tracks.
• In stop mode, when the My List setting
is done, press the
button to play the
tracks of My List.
2. Press the ENTER button to display the
message below:
C0 1 02 0 1 002
or
(01= My List number, 02 or 002= track number)
3. Repeatedly press the ¬ button or press the
or
button until the desired track is
displayed.
4. Press the VOLUME/JOG control on the main
unit or press the 1 or 2 button to select a
different track.
5. Press the ¬ button to confirm your
selection.
6. To play the My List tracks, press the MY LIST
button on the remote control or press the
button.
• When using the Checking or Editing the
Track functions of the My List mode, you
can use the DELETE button to remove a
track from the My List track list.
1.Press the DELETE button on the remote control.
"DEL N" is displayed.
2.Press the DELETE button on the remote control
or press the [ or ] button until "DEL Y" is
displayed.
3.When “DEL Y” is displayed, press the ENTER
button on the remote control. "REMOVE" appears
and the removal is complete.
6. Press and hold the MY LIST button to select
OFF-MY LIST to exit the My List mode.
• Each time you press and hold the MY LIST
button on the remote control, the mode will
switch as follows: OFF-MY LIST ; ON- MY
LIST.
ON-MY LIST : Enter the My List mode.
OFF-MY LIST : Exit the My List mode.
• If you open the disc tray or turn off the product,
your My List will be cancelled.
• If you remove usb device, the current USB
function my list mode will be cancelled.
• If you switch to another mode, CD/USB ON -MY
LIST mode is maintained.
• When the recording or copy is completed, the
15
02793H-MX-JS5000-ZC-ENG-20160331.indd 15
English
2016/4/13 8:52:04
Functions
Bluetooth
• You will see WAIT for a short period of time
and then BT READY on the front display of
the Hi-Fi Component.
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth
compliant devices to interconnect easily with each
other using a short, wireless connection.
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
-- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Hi-Fi Component.
-- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
-- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
• The greater the distance between the HiFi Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection is
lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works when
the Bluetooth device and the Hi-Fi Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric
interference during its operation.
To connect the Hi-Fi Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant stereo
headset function.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] HI-FI xxxxxx J-Series"
from the list.
• When the product is connected to the
Bluetooth device, it will display Device
name ; BT on the front display.
• If the Bluetooth device has failed to pair
with the product , delete the previous
“[Samsung] HI-FI xxxxxx J-Series” found
by the Bluetooth device and have it search
for the product again.
5. You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
||NOTES |
✎✎ The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
✎✎ The AVRCP feature is not supported.
✎✎ Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎✎ You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
✎✎ Only one Bluetooth device can be paired at a
time.
✎✎ You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the Hi-Fi Component. If the PIN code
input window appears, enter <0000>.
✎✎
1. Press the Bluetooth button of the Hi-Fi
Component to display the BT message.
16
02793H-MX-JS5000-ZC-ENG-20160331.indd 16
English
2016/4/13 8:52:04
✎✎ Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
✎✎ The Hi-Fi Component automatically turns off
after 25 minutes in the Ready mode.
Functions
✎✎ The Hi-Fi Component system may not search or
connect properly in the following cases:
-- If there is a strong electrical field around the
Hi-Fi Component.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
exceeds 16.25 feet (5 meters).
✎✎ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
03
✎✎ Once you have turned off the Hi-Fi Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
✎✎ When a Bluetooth device is connected to the
Hi-Fi Component system, the Component
system automatically switches to the Bluetooth
mode if it is in a different mode (except
when it is displaying "REQUEST" in the TV
SoundConnect mode if the Bluetooth device
haven't been paired with the HiFi Component
before.).
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi Component
will display BT DISCONNECTED ; BT READY
on the its display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press the another mode button on the front panel
of the Hi-Fi Component to switch from Bluetooth
mode to another mode or turn off the Hi-Fi
Component. The currently connected device is
disconnected.
||NOTES |
✎✎ The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
✎✎ In Bluetooth connection mode, the Bluetooth
connection may be lost if the distance between
the Hi-Fi Component and the Bluetooth device
17
02793H-MX-JS5000-ZC-ENG-20160331.indd 17
English
2016/4/13 8:52:05
Functions
Using Bluetooth Power On
Using the Samsung Audio Remote App
When the product is turned off, you can connect
your smart device to the product via a Bluetooth
connection to turn it on.
1. Press and hold the Bluetooth button to set
the Bluetooth Power On function on. ONBLUETOOTH POWER appears on the
display.
2. When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer
to your smart device’s manual.)
• The Bluetooth device must have been
paired with the Hi-Fi Component before.
3. When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
• Select the desired music to play from your
smart device.
||NOTE |
✎✎ Press and hold the Bluetooth button to turn
the Bluetooth Power On function on or off.
Each time you press and hold this button, the
Hi-Fi Component displays ON -BLUETOOTH
POWER ; OFF-BLUETOOTH POWER on its
display.
Installing the Samsung Audio Remote
App
To control the product with your Smart Device and
the Samsung Audio Remote app, download the
Samsung Audio Remote App by accessing the
app through Google Play store.
Accessing the Samsung Audio Remote
App
After you install the Samsung Audio Remote app,
follow the instructions in the app.
||NOTE |
✎✎ The APP function only supports Android mobile
phone devices running Android OS 3.0 or later.
18
02793H-MX-JS5000-ZC-ENG-20160331.indd 18
English
2016/4/13 8:52:05
TV SoundConnect
Before activating this function, be sure to activate
the Samsung TV's SoundConnect or SoundShare
mode.
1. Press the TV SoundConnect button of
the Hi-Fi Component to display the TV
SOUNDCONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front panel
of the Hi-Fi Component to switch from TV
SoundConnect mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
||NOTES |
3. When the Hi-Fi Component is connected
to the TV, it will display [TV] Name
;CONNECTED ; TV on the front display.
✎✎ The connected TV will wait a certain amount
of time for a response from the Hi-Fi
Component before terminating the connection.
(Disconnection time may differ, depending on
the TV)
||NOTES |
✎✎ The connection may be lost or sound may
stutter if the distance between the TV and the
Hi-Fi Component exceeds 6.5 feet (2 m).
4. The audio from the connected TV plays over
the Hi-Fi Component system.
✎✎ In TV SoundConnect mode, the Play/Repeat/
Stop/Next/Back functions are not available.
✎✎ The SoundConnect feature is available on some
Samsung TVs released since 2012. Check
whether your TV supports the SoundShare or
SoundConnect function.
(For further details, refer to the TV's user's
manual.)
Functions
Connecting the Hi-Fi Component to a
SoundConnect Compatible Samsung
TV
You can disconnect the TV from the Hi- Fi
Component.
For instructions, see the TV's user manual.
• When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component will display TV
DISCONNECTED ; REQUEST on its display.
03
To disconnect the TV from the Hi-Fi
Component
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the TV
SoundConnect function.
✎✎ Instability in the network environment may
cause the connection to be lost or sound to
stutter.
✎✎ In TV SoundConnect mode, the Hi-Fi
Component automatically turns off after 25
minutes if it is not connected to a TV.
✎✎ If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the TV
SoundConnect connection again.
✎✎ Only one Hi-Fi Component at a time can be
connected to a TV via TV SoundConnect.
✎✎ To connect to another TV in TV Soundconnect
mode, press the
button for more than 5
seconds, and then connect to the other TV by
following the directions above.
19
02793H-MX-JS5000-ZC-ENG-20160331.indd 19
English
2016/4/13 8:52:06
Functions
Using My Karaoke
Auto Change Function
You can use the MY Karaoke function to sing
along with your favorite CDs and USB tracks.
1. Connect a microphone to the MIC jack on the
front of the product.
• If your microphone plug is smaller than the 6.3mm
(0.25 in) MIC jack, you need a Connector-Adaptor
(not supplied) to complete the connection.
-- First, connect the Connector-Adaptor to the
MIC jack on the front of the product,
-- Second, connect the microphone (with larger
jack) to the Connector-Adaptor.
You can play a disc followed by a USB device
connected to USB1 and/or USB2 continuously.
1. Press the AUTO CHANGE button,use , , .
buttons or 1, 2 buttons to select a setting,
and then press ¬ to apply your selection.
• If My List Play has not been set in CD/USB mode, the
settings change as follows: AUTO CHANGE OFF
; ALL
• If My List Play has been set in CD/USB mode, the
settings change differently: AUTO CHANGE OFF
; ALL; MYLIST
2. Press the MIC VOL-, + button on the
remote control to adjust the volume of the
microphone.
3.
-- When the AUTO CHANGE mode is "ALL",the HiFi Component will play music from DISC, USB1, and
USB2 continuously.
-- When the AUTO CHANGE mode is "MYLIST",
the Hi-Fi Component will play My List tracks from
DISC, USB1, and USB2 continuously.
Press the MY KARAOKE button on the
remote control to suppress the vocal if you
need to. Each time the button is pressed, the
selection is changed as follows:
-- If a file recorded in a format that is not supported
by you Hi-Fi Component is included in the My List
tracks, Repeat All and Auto Change MyList will not
work.
ON ; OFF
• If you hear strange noises (squealing or howling)
while using the Karaoke feature, move the
microphone away from the speakers. Turning down
the microphone's volume or the speaker volume
is also effective. Do not aim the MICROPHONE
towards the SPEAKERS.
-- If you press the POWER button, another function
button, or the OPEN/CLOSE button, the AUTO
CHANGE function automatically switches to
"OFF" mode.
-- When the Auto Change mode is "ALL or MY
LIST", the main unit cannot record.
• The microphone does not operate in the AUX and
TUNER mode.
-- When the Auto Change mode is "ALL or MY
LIST", the REPEAT functions automatically switch
to OFF.
• If you connect a microphone, GIGA SOUND
automatically turns off. To turn Giga Sound back on
you must remove the microphone, and then press
the GIGA SOUND BLAST button.
-- When the Auto Change mode is "ALL or MY LIST",
the REC SPEED, USB REC, REPEAT, MY LIST, and
DELETE functions do not work, and the unit displays
ALL/MY LIST-AUTO CHANGE mode.
• MY KARAOKE is available when a microphone is
disconnected to the Hi-Fi component.
-- When the DISC play ends, if there's no device
connected to USB1 and/or USB2, the unit will
continue to play the disc.
• MY KARAOKE does not operate in the Bluetooth,
TV SoundConnect, TUNER, and AUX mode.
20
02793H-MX-JS5000-ZC-ENG-20160331.indd 20
-- When USB play ends, if there's no disc in the unit,
the unit will continue to play music from USB1 and/
or USB2.
English
2016/4/13 8:52:06
Listening to the Radio
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER button.
2. To search for a station, press the TUNING
MODE button on the remote control or the
STOP button on the product one or more times
until MANUAL is displayed.
3. Select a station by:
• Pressing and holding the TUNING1,
2 button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
2. Press the TUNING MODE button on the
remote control until “PRESET” is displayed.
3. Press 1, 2 button on the main unit or
TUNING 1, 2 on the remote control to
select a preset number.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK " is displayed.
2. Press the ¬ button on the remote control.
The hour flashes.
• To increase the hours: ,
• To decrease the hours: .
a. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
3. When the correct hour is displayed, press the
¬ button, and then the minutes flash.
• To increase the minutes: ,
• You can select a number from 1 to 15.
4. When the correct minute is displayed, press
the ¬ button, and then " TIME" appears in
the display.
b. Press the 1, 2 button or the ,, .
buttons to scroll through and select a
preset number.
c. Press the ¬ button to save the preset.
6. To store additional radio stations, repeat
Steps 3 to 5.
||NOTES |
✎✎ In Tuner mode
• In the Manual mode, you can use the 1 or
2 button to change stations.
• In the Preset mode, you can use the 1
or 2 button to search for a stored radio
station.
21
02793H-MX-JS5000-ZC-ENG-20160331.indd 21
Functions
1. Select FM by pressing the TUNER button on
the product or remote control.
You can store up to15 FM stations.
03
To Store the Stations You Want
• To decrease the minutes: .
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be
switched on or off automatically, cancel the
timer by pressing the TIMER ON/OFF button.
English
2016/4/13 8:52:07
Functions
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until
displayed.
TIME is
displayed.
2. Press the ¬ button.
Result: ON is displayed for a few seconds.
You can set the timer switch-on time.
8. Press the ¬ button.
Result: REC N is displayed. You can press
the , or . button to select REC Y or REC N,
and then press ¬ button.
1) If you select REC N, it will cancel tuner
timer recording and any currently set tuner
timer recording. Note that selecting REC
N does not cancel the Timer setting.
3. Set the timer switch-on time.
a. Press the , or . button to set the hours.
2) If you select REC Y, you can set the tuner
timer recording on and off times.
b. Press the ¬ button.
Result: The minutes flash.
a. Press the ¬ button.
Result: ON is displayed for a few
seconds. You can set the tuner timer
recording switch-on time.
c. Press the , or . button to set the
minutes.
d. Press the ¬ button.
Result: OFF is displayed for a few
seconds. You can now set the timer
switch-off time.
b. Press the ¬ button.
Result: OFF is displayed for a few
seconds. You can set the tuner timer
recording switch-off time.
4. Set the timer switch-off time.
a. Press the , or . button to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
✎✎ Tuner timer recording On/Off times can differ
from Timer On/Off times.
c. Press the , or . button to set the
minutes.
d. Press the ¬ button.
Result: VOL XX is displayed, where XX
corresponds to the volume already set.
5. Press the , or . button to adjust the
volume level and press the ¬ button.
Result: The source to be selected is
displayed.
6. Press the , or . button to select the
source the Hi-Fi Component will play when it
switches on.
If you select
FM (radio)
MP3/CD
(compact disc)
||NOTES |
You must also
a. Press the ¬ button.
b. Select a preset station
by pressing the , or
. button.
✎✎ If the timer switch on and off times are identical,
the word ERROR is displayed.
✎✎ You can use the 1, 2 buttons or VOLUME/
JOG on the product instead of the , or .
button to make adjustments in Steps 3 through
8.
✎✎ If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording is not
applied.
✎✎ When you use the auto timer, you may need
an additional step to use a CD or USB device
with it, depending on the disc (or device).
Consequently, it is easier to use the tuner
instead.
✎✎ If you select MP3/CD or USB mode when
there is no disc or no USB in the product, it will
automatically change to TUNER.
Load a compact disc.
USB
Connect a USB device.
7. Press the ¬ button.
Result: CHKREC (Do you want to record?) is
22
02793H-MX-JS5000-ZC-ENG-20160331.indd 22
English
2016/4/13 8:52:07
Cancelling the Timer
USB 1
3. P
ress the USB REC button on the remote control
or the USB REC button on the main unit to start
recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button on the
remote control or press and hold the USB REC
button on the main unit to start recording all
tracks on the disc. "FULL CD RECORDING" is
displayed.
||NOTE |
✎✎ When you select the OFF-TIMER mode, the
TIMER RECORDING and TIMER function are
not available.
The Recording Function
CD-ROM, USB 1
Basic Recording
• Press the USB REC button. The currently
playing file is copied onto the USB2 device.
• Press and hold the USB REC button. All the
files in the current folder are copied onto the
USB2 device.
• If you connect a microphone and press the USB
REC button, the currently playing mp3 file and the
sound from the microphone is recorded onto the
USB2 device.
MP3 RECORDING: "MP3 RECORDING""RECORD"
COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done,
“STOP” will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is cancelled.
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. C
onnect an external USB storage device to
the USB 2 (
) jack on your
product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the CD button on the main unit to select
the MP3/CD function.
• Press the OPEN/CLOSE button to open the
disc tray.
• Place a CD and press the OPEN/CLOSE
button to close the disc tray.
• Use the CD selection buttons ( [ or ] ) to
select the desired song.
Tuner
• Select TUNER by pressing the TUNER button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player
to your product.
• Press the AUX1/2 button to select <AUX>
input.
• Play a song from the external device.
23
02793H-MX-JS5000-ZC-ENG-20160331.indd 23
Functions
• Connect a USB device to the USB 1 jack of
your product
• Press the USB button to select USB 1.
• Play a song from USB 1.
03
After you have set the timer, it will start
automatically.If you no longer want to use the
timer, you must cancel it.
• To cancel the timer, Press the TIMER ON/OFF
button once.
• To restart the timer, Press the TIMER ON/OFF
button once again.
Tuner /External Source
• Tuner: "Tuner Recording""Record"
• External Source : "AUX Recording""Record"
4. T
o stop recording, press the STOP (@) button.
The unit automatically creates and saves
recorded files in .MP3 format (SAM-XXXX.MP3).
5. After recording, a directory named
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “CD
COPY”(CD-ROM/USB), “MP3 RECORDING”(CDROM/USB), “TUNER RECORDING” or “AUX
RECORDING” is created on your USB device.
English
2016/4/13 8:52:08
Functions
||NOTES |
READY" is displayed.
✎✎ Do not disconnect the USB device or the
AC Cord during recording as this may cause
damage to the file.
✎✎ If the Hi-Fi Component does not support the
USB device connected to USB2, when you
press the USB REC key, "NOT SUPPORTED
USB DEVICE" is displayed.
✎✎ WMA/MP2 files can be copied but not
recorded.
✎✎ If you disconnected the USB device during a
recording, the main unit powers off and you
will not be able to delete the recorded file from
your USB device. If this occurs, please connect
the USB device to a PC, back up the USB data
to the PC, and then format the USB device.
✎✎ If the USB has insufficient free memory space,
the system will display “NOT ENOUGH
MEMORY”.
✎✎ The USB device or HDD you are recording to
must be formatted in the FAT file system. The
NTFS file system is not supported.
✎✎ When you use the CD high speed search
function, CD recording is not available.
✎✎ The recording time may be longer with some
USB devices.
✎✎ In the My List or Auto Change mode, you can't
use the recording function.
✎✎ During recording, if you disconnect the
microphone, the recording will stop. If you
reconnect the microphone, the recording will
not restart.
Recording Speed
During the CDDA disc mode, each time you press
the REC SPEED button on the remote control,
the recording speed will change as follows:
NORMAL SPEED RECORD ; HIGH SPEED
RECORD
• When you record from the tuner or an external
source, you cannot change the recording
speed.
• If you select HIGH SPEED RECORD, sound is
not produced during the recording.
• If you connect the microphone, you have one
recording speed mode available: NORMAL
SPEED RECORD.
✎✎ The EQ is set to "OFF" automatically and is not
available during a recording.
✎✎ The GIGA MODE and Football functions are
set to "OFF" automatically and are not available
during a recording.
✎✎ The REPEAT function is set to "OFF"
automatically and is not available during a
recording.
✎✎ If you use the MIC function during a CD
recording, the sound from the microphone will
be recorded.
✎✎ You cannot record the radio when searching or
if no stations are available in the Tuner mode.
✎✎ Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in
the recording. If this occurs, lower the external
device’s volume level.
✎✎ The maximum TUNER/AUX recording time is 5
hours.
✎✎ If USB2 has no USB device connected, and
you press the USB REC button, "USB2 NOT
24
02793H-MX-JS5000-ZC-ENG-20160331.indd 24
English
2016/4/13 8:52:08
Special Sound Effects
1. Press the PRESET EQ button.
Each time you press the PRESET EQ button
repeatedly or press the PRESET EQ button
first, and then turn the VOLUME/JOG control
on the product, the mode will change as
follows:
FLAT ; RANCHERA ;CUMBIA ; REGGAE
; MERENGUE ; SALSA ; REGGATON ;
FOLKLORE ; PARTY ; POP ; HIP HOP ;
ROCK ; JAZZ ; CLASSIC ; ELECTRONIC
FOOTBALL MODE function
The Football mode brings greater realism to sports
broadcasts.
1. Press the FOOTBALL MODE button on the
product.
Each time you press this button, the mode
changes as follows:
Functions
Your Hi-Fi Component system provides predefined
equalizer settings that are optimized for particular
music genre.
03
✎✎ You can apply the GIGA SOUND effect to the
FOOTBALL and EQ functions.
Selecting PRESET EQ Mode
ANNOUNCER ; STADIUM; OFF
2. To cancel this function, press the FOOTBALL
MODE button until “OFF” is displayed.
||NOTE |
✎✎ Use the VOLUME/JOG to alter the PRESET
EQ mode. The PRESET EQ mode you selected
will be applied after about 2 seconds.
Selecting USER EQ Mode
You can modify the loudness of an EQ frequency
band using the USER EQ mode.
1. Press the USER EQ button.
2. Press the ENTER button and the EQ band
appears.
3. Press the
or
button to move to a
desired band.
Each time you press the
or
button on
the remote control, the band will change as follows:
80H 0 ; 200H 0 ; 800H 0 ; 2KH 0 ; 8KH 0
4. Press the , or .button or the VOLUME/
JOG control on the front panel to select a
level from -6 to +6.
5. Press the ENTER button.
||NOTES |
✎✎ You can also preset EQ first, repeat Steps 2~4,
and then press the MEMORY button on the
remote control to save your selection to USER
EQ.
✎✎ In addition, you can use the [ or ] button
instead of the , or . button.
25
02793H-MX-JS5000-ZC-ENG-20160331.indd 25
English
2016/4/13 8:52:09
Functions
Software update
GIGA MODE Function
The GIGA MODE function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. Press the GIGA SOUND BLAST button
on the main unit or the GIGA button on the
remote control. Each time you press this
button, the mode changes as follows:
GIGA SOUND BLAST ; OFF-GIGA SOUND
2. To cancel this function, press the GIGA
button until “OFF-GIGA SOUND” is
displayed.
||NOTE |
✎✎ If you connect a microphone, press the GIGA
button and the product will display " NOT
SUPPORTED".
NON-STOP RELAY Function
The NON-STOP RELAY function plays music
continuously without an interval between tracks/
files. For example, for two successive mp3 files,
the function skips to a position 10 seconds after
the start of the second file when there are 10
seconds of playing time left in the first file.
Press the NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
ON-NON-STOP MUSIC RELAY ; OFF-NONSTOP MUSIC RELAY
||NOTE |
✎✎ This function is only available during playback
of a CD/USB.
26
02793H-MX-JS5000-ZC-ENG-20160331.indd 26
Samsung may offer updates for the product's system firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your product.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
Call Center to receive more information about downloading updates files.
• Select USB function, insert a USB device
containing the firmware update into the USB port
on the main unit.
• Updating firmware may not work properly if audio
files supported by the product are stored in the
USB storage device.
• Do not disconnect the power or remove the USB
device while updates are being applied. The main
unit will turn off automatically after completing the
firmware update.
• After the update, all settings are reset to their
factory default settings. We recommend you write
down your settings so that you can easily reset
them after the update.
If the firmware fails to update, we recommend
formatting the USB device in FAT16/FAT32 and
trying again.
• Once the software update is completed, turn on
the product with no disc inserted. The “NO DISC”
message appears on the display. Press and hold
the STOP button on the main unit for longer than
5 seconds. “INIT ” appears on the display and the
unit powers off. The upgrade is complete.
• Do not format the USB device in the NTFS format.
The product does not support the NTFS file
system.
• Depending on the manufacturer, some USB
devices may not be supported.
• The product has a DUAL BOOT function. If the
firmware fails to update, most functions will
become inoperable and "UPGRADE FIRMWARE"
will appear on the display. Update the firmware
again.
English
2016/4/13 8:52:09
Troubleshooting
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start immediately
when the Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and
step motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
The remote control does not work.
• Is the remote control being operated within its operational
angle and distance range?
• Are the batteries drained?
The product is not working.
(Example: The power goes out or
the front panel buttons don't work,
or you hear a strange noise.)
The product is not working normally.
• Press the @ button (on front panel) for more than 5 seconds
with no disc inside. The initialization message appears on the
screen, and the power will turn off automatically. When you
turn your product on again, all the settings will be reset.
Don't use this unless absolutely necessary.
Can't receive radio broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
27
02793H-MX-JS5000-ZC-ENG-20160331.indd 27
Appendix
Symptom
04
Refer to the chart below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
English
2016/4/13 8:52:10
Appendix
Specifications
Weight
GENERAL
FM Tuner
CD Disc
Amplifier
Dimensions
Main unit
8.16 lbs
Front speaker
13.2 lbs
Subwoofer
19.6 lbs
Main unit
15.9 (W) x 8.0 (H) x 10.5 (D) inches
Front speaker
10.8 (W) x 16.3 (H) x 10.2 (D) inches
Subwoofer
16.3 (W) x 16.3 (H) x 12.1 (D) inches
Operating Temperature Range
+41°F to +95°F
Operating Humidity Range
10 % to 75 %
Signal/Noise ratio
55 dB
Usable sensitivity
10 dB
Total harmonic distortion
1%
Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 12 cm (COMPACT DISC)
Maximum Play Time : 74 min.
Front speaker output
550W/CH (4Ω) (MAX)
Tweeter output
250W/CH (8Ω) (MAX)
Subwoofer output (MX-JS5500)
550W/CH (4Ω) (MAX)
Frequency range
22Hz~20KHz
S/N Ratio
70 dB
Channel separation
50 dB
Input sensitivity
AUX IN1 1.2V, AUX IN2 2.0V
*: Nominal specification
-- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-- Weight and dimensions are approximate.
-- Design and specifications are subject to change without prior notice.
-- For information on the power supply and power consumption, refer to the label attached to the
product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.
request@samsung.com).
28
02793H-MX-JS5000-ZC-ENG-20160331.indd 28
English
2016/4/13 8:52:10
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective
material and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty
period and the failure is due to improper workmanship or defective materials, SECA will repair
or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and
address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry- in)
One year
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable
proof of purchase. It must be presented to the authorized service center at the time service is
requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse,
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or
damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this
warranty. Customer adjustments which are explained in the instruction manual are not covered
under the terms of this warranty. This warranty will automatically be voided for any unit found with a
missing or altered serial number. This warranty is valid only on products purchased and used in
Canada.
Samsung Electronics Canada Inc
2050 Derry Rd West
Mississauga, On. L5N 0B9
Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199
Website: www.samsung.com/ca
02793H-MX-JS5000-ZC-ENG-20160331.indd 29
2016/4/13 8:52:10
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
HEADQUARTERS
Samsung Electronics Canada Inc.
2050 Derry Road West,
Mississauga, Ontario L5N 0B9 Canada
Tel: 1-800-SAMSUNG (1-800-726-7864)
Website: www.samsung.com/ca/support
CANADA
U.S.A
Area
Contact Center 
1-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca/support (English)
www.samsung.com/ca_fr /support(French)
www.samsung.com/us/support
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
02793H-MX-JS5000-ZC-ENG-20160331.indd 30
2016/4/13 8:52:10
Download PDF

advertising