Samsung | UN19F4000BF | Samsung UN19F4000BF User Manual

Warning! Important Safety Instructions
LED TV
(Please read the Safety Instructions before using your TV.)
CAUTION
user manual
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Important Warranty Information Regarding Television ✎✎
Format Viewing
✎✎ Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of the
screen width to screen height) are primarily designed to display wide screen
✎✎
format full-motion video. The images displayed on them should primarily
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your ✎✎
model offers this feature and the images are constantly moving. Displaying
stationary graphics and images on screen, such as the dark sidebars on
non- expanded standard format television video and programming, should
be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market
crawls, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions.
Displaying stationary images that exceed the above guidelines can cause
uneven aging of LED Displays that leave subtle, but permanent burned-in
ghost images in the LED picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary
patterns or dark bars. On LED models that offer picture sizing features, use
these controls to view different formats as a full screen picture. Be careful
in the selection and duration of television formats you use for viewing.
Uneven LED aging as a result of format selection and use, as well as burnedin images, are not covered by your Samsung limited warranty.
Installation with a stand.
Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements
(such as TV channel logos, panorama or 4:3 image format, stock or news bars at
screen bottom etc.) on the screen. Constant displaying of still pictures can cause
ghosting of LED screen, which will affect image quality. To reduce risk of this effect,
please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format menu for
best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care center.
Country
CANADA
Address
Samsung Electronics
Canada Inc.
2050 Derry Road West
Mississauga, Ontario L5N
0B9
Canada
Customer Care
Center 
1-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca/
support (English)
www.samsung.com/ca_
fr/support (French)
U.S.A
Samsung Electronics
America, Inc.
85 Challenger Road
Ridgefield Park, NJ
07660
www.samsung.com/us/
support
DC voltage: Rated voltage marked with this symbol is
DC voltage.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
Caution. Consult instructions for use: This symbol
instructs the user to consult the user manual for further
safety related information.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.
✎✎ Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
✎✎ Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
✎✎ Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly.
Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local
electrical supply.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug.
Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
when children, elderly, or disabled people will be left alone in the house).
✎✎ Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by
causing the insulation to deteriorate.
• Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so
may lead to serious damage to your TV.
• Use only a properly grounded plug and wall outlet.
✎✎ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure
that the wall outlet and power plug are readily accessible.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as
wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or
erase the printing on the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or
equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• Use care when touching the TV after it has been on for some time. Some parts can be warm to the touch.
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
-00
-1 -
The On Screen Menus
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Displays and selects the available video
sources.
Turns the TV on and off.
Turns the remote control light on or off. When
on, the buttons become illuminated for a
moment when pressed. (Using the remote
control with this button set to On will reduce
the battery usage time.)
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to
select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Returns to the previous channel.
Adjusts the volume.
Changes channels.
Displays the channel list on the screen.
Displays the main on-screen menu.
SLEEP
Quickly select frequently used functions.
Returns to the previous menu.
Display Modes (HDMI/DVI Input)
IBM
MAC
VESA DMT
Vertical
Frequency (Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H / V)
1366 x 768
720 x 400
31.469
70.087
28.322
-/+
c
640 x 480
35
66.667
30.24
-/-
c
832 x 624
49.726
74.551
57.284
-/-
c
1152 x 870
68.681
75.062
100
-/-
640 x 480
31.469
59.94
25.175
-/-
c
640 x 480
37.861
72.809
31.5
-/-
c
640 x 480
37.5
75
31.5
-/-
c
800 x 600
37.879
60.317
40
+/+
c
800 x 600
48.077
72.188
50
+/+
c
800 x 600
46.875
75
49.5
+/+
c
1024 x 768
48.363
60.004
65
-/-
c
1024 x 768
56.476
70.069
75
-/-
c
1024 x 768
60.023
75.029
78.75
+/+
c
+/+
1152 x 864
67.5
75
108
1280 x 720
45
60
74.25
1280 x 800
49.702
59.81
83.5
-/+
1280 x 1024
63.981
60.02
108
+/+
1280 x 1024
79.976
75.025
135
+/+
1366 x 768
47.712
59.79
85.5
+/+
+/+
The Menu options are presented below, arranged by Main menu categories.
A Tools button symbol (t) next to an option name indicates the
option is also available in one of the Tools menus.
Picture Menu
Select your preferred picture mode.
When your TV is connected to a PC, you can only select Entertain and Standard.
Use these buttons according to the direction
on screen.
■■ Dynamic: Brightens the screen. Suitable for a bright room.
■■ Standard: Suitable for normal room brightness.
■■ Movie: Darkens the screen, making it less glary. Suitable for watching movies in a
darkened room.
■■ Entertain: Sharpens the picture. Suitable for games.
✎✎ Only available when the TV is connected to a PC.
Use these buttons in a specific feature.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
• Use the remote control within 23 feet from TV.
• Bright light may affect the performance of the remote control.
Avoid use when nearby fluorescent lights or neon signs.
• The Color and shape may vary depending on the model.
c
c
connected to an input on the TV. Picture Sizes available by Input
Source are listed below:
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally. A
magnified or shrunk picture can be moved left, right, up, and down.
Input Source
Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV (1080i, 1080p), Component (1080i,
16:9, Wide Fit, 4:3, Screen
Fit
1080p), HDMI (720p)
■■ Digital Clean View (Off / Low / Medium / High / Auto) : If the broadcast signal
received by your TV is weak, you can activate the Digital Clean View feature to
reduce any static and ghosting that may appear on the screen.
✎✎ When the signal is weak, try all the Digital Clean View options until the
TV displays the best picture.
■■ HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to
adjust the screen depth. Low make blacks look darker.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process
film signals from all sources and adjusts the picture for optimum quality.
✎✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
■■ Motion Lighting (Off / On): When on, the TV automatically dims the screen's
backlights when full brightness is not needed - for example when the TV is
displaying dark scenes - to reduce power consumption. The backlights are
returned to full brightness when the TV displays bright scenes.
Picture Off
Picture Reset
■■ Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to
their factory defaults.
■■ Backlight: Adjusts the brightness of the screen by adjusting the brightness of the
individual pixels.
■■ Contrast: Increases or decreases the contrast between dark and light areas of the
picture.
■■ Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.
■■ Sharpness: Sharpens or dulls the edges of objects.
■■ Color: Adjusts the color saturation. The higher the Color setting, the more intense
the color. Low settings remove color and the picture becomes black, white, and gray.
■■ Tint (G/R): Adjusts the amount of green and red in the picture. As you increase the
amount of green, the amount of red decreases and vice versa.
✎✎ When the TV is connected to a PC, you can only make changes to Backlight,
Contrast, Brightness, and Sharpness.
✎✎
✎✎ NOTE
✎✎ You can adjust and store settings for each external device you have
The screen is turned off but the sound remains on. Press any button except
the power key or volume button to turn on the screen.
Picture Options
-5-
UF4000_ZC_BN68-08226B-00_ENG_19inch.indb 1
you have selected. For example, if you have selected the HDMI
source, the Channel category will not appear. To see the Channel
category, you must first select TV in the Source List.
✎✎
Installing batteries (Battery size: AAA)
4 series:1366 x 768@60Hz
Resolution
✎✎ The menu options that appear in the Main menu depend on the Source
Displays information on the TV screen.
Exit the menu.
P.SIZE: Lets you choose the picture size.
MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
CC: Controls the caption decoder.
Mode
yy Picture
yy Input
yy Sound
yy Application
yy Channel
yy Support
yy Setup
To view the Main menu, press the MENU button on your remote. To view a
Tools menu, press the TOOLS button on your remote.
Mode t
• Power Cord
• AC/DC Adapter (for 19", 22" models)
• Cable Manager (for 28", 29" models)
When the TV is connected to a PC, you can only make changes to the Color Tone,
Size, and HDMI Black Level.
■■ Color Tone (Cool / Standard / Warm): Cool makes the picture bluer (cooler). Warm
makes the picture redder (warmer).
✎✎ Warm is deactivated when the picture mode is set to Dynamic.
■■ Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of screen sizes as well.
However, we highly recommend you use the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1: Provides moderate magnification of the picture. Sides, top, and bottom are
cut off.
Zoom2: Provides larger magnification of the picture. Sides, top, and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray borders on the right
and left of the picture.
✎✎ Do not watch your TV in the 4:3 format for a long time. The borders displayed
on the left, right, and center of the screen in 4:3 format may cause image
retention (screen burn) which is not covered by the warranty.
Sound Menu
Mode t
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
Equalizer
Available in Standard sound mode only.
■■ Balance L/R: Adjusts the balance between the right and left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
loudness of specific bandwidth frequencies.
■■ Reset: Resets the equalizer to its default settings.
Auto Volume
HDMI connection
Set-top box / Blu-ray player / DVD
• For an HDMI to DVI cable connection, you must use the HDMI IN 2
(DVI) port.
• Connecting through the HDMI cable may not be supported
depending on the PC.
• If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port,
the audio does not work.
• For Set-top box connection using HDMI cable, we highly
recommend you to connect the HDMI IN 1 (STB) port.
AV connection
PC connection
(Using an HDMI (to DVI) Cable)
AUDIO OUT
Input Cables (Sold Separately)
• Audio
• Composite (AV)
• HDMI
• HDMI-DVI
✎✎ Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
Cable Plugs
Ports/Jacks
depending on the model.
VIDEO OUT
R-AUDIO-L
• Component
• Coaxial (RF)
• The position of the port may differ
VCR / Blu-ray player
DVI OUT
HDMI OUT
TV Side Panel
TV Rear Panel
R
W
R
Y
R
W
Y
Do not plug in opposite or wrong direction. It could
damage the TV port.
HDMI
Power Input
(for 28", 29" models)
Power Input
(for 19", 22" models)
USB
Do not plug cables in upside down. Be sure to check the orientation of the plug before plugging it in.
USB
TV Controller (Panel Key)
R
W
R
B
G
R
R
W
R
B
G
The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
or
Selecting the Media Play
VHF/UHF Antenna
AUDIO OUT
Function menu
m R s
P
R-AUDIO-L
Selecting a Source
Remote control sensor
TV Controller
The image is drawn by facing
the front side of the TV.
ANT OUT
COMPONENT OUT
PR
PB
Y
Headphones connection
Component connection
Power Off
How to use Edit Name
Input Menu
Selecting the Menu
Edit Name lets you associate a device name to an input source, making it
easier to select a source. To access Edit Name, enter the Input menu, and
then select Edit Name. Select the name of the device from the drop down
next to the name of the input jack it is connected to. For example, if your
Blu-ray player is connected to HDMI 2, select Blu-ray player from the drop
down next to HDMI 2.
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
✎✎ Exits the menu when pressing the controller more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it
first, you cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
1. Press the SOURCE button.
✎✎ If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
2. Select a desired external input source.
■■ TV / AV / Component / HDMI1 / HDMI2/DVI
You can only choose external devices that are connected to the TV. In the
Source List, connected inputs are highlighted.
cable, you should select PC mode in Edit Name.
✎✎ If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
to DVI cable, you should select DVI PC mode in Edit Name.
✎✎ If you have connected an AV device to the HDMI IN 2 (DVI) port with
an HDMI to DVI cable, you should select DVI mode in Edit Name.
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings.
Press the POWER button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV
guides.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
-4-
Preferred Language
Auto Program
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for
example, simultaneous translations of a program into foreign languages).
The Auto Program function memorizes all channels that are available over the air
or through your cable system and adds them to the Channel List. If you are using a
cable or satellite box, you do not need to run the Auto Program function.
Multi-Track Sound (MTS)
1. Push MENUm → Channel → Auto Program → ENTERE on your remote. The
Antenna Source screen appears.
✎✎ You can only select a language from among the ones being broadcast.
Analog channels only.
To start Auto Program, follow these steps:
2. On the Antenna Source screen, select the source of your TV signal.
■■ Mono: Select for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
■■ Stereo: Select for channels that are broadcasting in stereo.
■■ SAP: Select to listen to the Separate Audio Program, which is usually a
foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to Mono,
Stereo or SAP.
Air
If your TV is connected to an antenna choose Air, and then press ENTERE. The
TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose Cable, and then press
ENTERE. Go to Step 3.
Visually Impaired
Auto
(digital channels only)
If you choose Auto, and then press ENTERE, the TV will automatically
select the correct Antenna source. Go to Step 3.
Adds a verbal description to the main audio to help the visually impaired.
Dolby Digital Comp
3. On the Cable Type screen, use the ◀/▶/▲/▼ buttons to select the type of
digital and analog cable systems you have: STD, HRC, or IRC. Most systems are
STD (Standard). When done, select Start, and then press ENTERE. The TV will
start memorizing channels.
Sets Dolby Digital compression mode.
HDMI Audio Format
✎✎ Channel memorization can take up to 45 minutes, depending on your
You can select the HDMI Audio format. The available HDMI Audio format may
differ depending on the input source.
cable system.
✎✎ Memorized channels are added to the Added Channels list. These are the
Sound Reset
■■ Reset All: Resets all sound settings to the factory defaults.
Channel Menu
❑❑ Memorizing Channels
When you first set up your TV using Plug & Play, the TV memorized the
channels that were available over the air or through your cable system and
added them to the Channel List. The Antenna and Auto Program functions
described below let you re-run the channel memorization function without
having to re-run the Plug & Play procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you must
select your TV's signal source, Air (using an antenna) or Cable. Select Menu >
Channel > Antenna > Air or Cable. After you have selected the signal source,
go on to the Auto Program function.
✎✎ Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select Cable, you will see
only snow. You must select Air to see a picture.
channels you will see when you use the Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
✎✎ Press the ENTERE button to stop the Clear Scrambled Channel.
✎✎ This function is only available in Cable mode.
❑❑ Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels you've
scheduled for viewing. Add or delete Favorite channels, add or delete
channels from the Added Channels list, schedule channels or programs for
viewing. Watch a channel by selecting the channel in the All Channels, Added
Channels, or Favorite Channels screen, pressing the ▲ / ▼ buttons, and then
pressing the ENTERE button.
Channel List Screens icons are listed on the left side. Select an icon using the
▲/▼ buttons to view each list.
■■
All Channels: Shows all currently available channels including those
you deleted from the Added Channels list.
Added Channels: Shows all Added Channels. These are the channels
that appear when you press the CH button.
■■ * Favorite Channels: Shows all favorite channels.
■■ Programmed: Shows all channels and programs currently scheduled
using Timer Viewing.
✎✎ Remote control buttons active on the Channel List screen.
■■
xx Green (Zoom): Enlarges or shrinks a channel number.
xx Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A c mark appears. Repeat to
select additional channels. Then, open the Tools menu and
apply a function to the channels you selected.
xx T (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
✎✎ If you use a cable box or satellite box, you cannot use the Channel List
or the Channel List functions.
Display Icons Used in the Channel List Screens
Icons
c
*
)
(
-7-
Cable
Blu-ray player / DVD
Return
Automatically adjusts the volume level when you change video sources or
content so the level remains the same.
-6-
• For the best picture and audio quality, connect digital devices using
an HDMI cable.
• If you connect an external device to the TV that uses an older version
of HDMI, the video and audio may not work. If this occurs, ask the
manufacturer of the device about the HDMI version and, if it is out of
date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture
may not display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
-3-
Screen Fit: Displays the full image without any cut-off when your TV is
inputting HDMI (720p) or Component HD signals.
✎✎ HD (High Definition) has a 16:9 aspect ratio and 720p (1280x720)
resolution.
The Main menu has seven primary categories:
Automatically shuts off the TV at a preset time.
Selects the on-screen menu items and changes the
values seen on the menu.
Horizontal
Frequency
(KHz)
Your TV has two kinds of menus, the Main menu and the various Tools menus.
The Main menu gives you access to most or all of the menu options available
on your TV. The Tools menus display a selected number of frequently used
menu options that change depending on the screen you are viewing. A Tools
menu symbol (T) in the lower right side of the screen indicates that a Tools
menu is available.
Cuts off the sound temporarily.
MEDIA.P
• Remote Control (AA59-00600A) & Batteries (AAA x 2)
• Warranty Card / Regulatory Guide
• Owner’s Instructions
-2-
Remote Control
Views the Media Play.
Accessories
AC voltage: Rated voltage marked with this symbol is
AC voltage.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact with
any internal part of this product.
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics
only.
• If you use parts provided by another manufacturer, it may result in a problem
with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Connections
Class II product: This symbol indicates that a safety
connection to electrical earth (ground) is not required.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Securing the Installation Space
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Getting Started
R
Important Safety Instructions
Meaning
A selected channel.
A Favorite channel.
A reserved program.
A program currently being broadcast.
❑❑ The Channel List Tools Menu t
The Channel List Tools menu contains most of the functions you can use on the
All Channels, Added Channels, and Favorite Channels List screens. To view,
select a list screen, select a channel, and then press the TOOLS button.
Programmed List Screen Tools Menu t
■■ Change Info: Change the scheduling information for a show or channel you
have scheduled.
To change the information, follow these steps:
■■ Add / Delete: Delete a channel from or add a channel to the Added Channels list.
1. Select the Programmed List icon on the left side of the Channel List
screen, and then press the ENTERE button.
To delete channels from the Added Channels list, follow these steps:
2.
On the Programmed List screen, select the show or channel entry you
1. Select one or more channels in the Added Channels list using the ▲/▼
want to change, and then press the TOOLS button. The Tools Menu
buttons and the Yellow Select button on your remote.
appears.
2. Press the TOOLS button on your remote. The Tools menu appears.
3. Select Change Info, and then press the ENTERE button. The Timer
3. Select Delete in the Tools menu, and then press the ENTERE button.
Viewing screen appears.
To add channels to the Added Channels list, follow these steps:
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
1. Select one or more channels in the All Channels list using the ▲/▼
buttons to change the entries. Where numbers are displayed, you can
buttons and the Yellow Select button on your remote.
also enter numbers directly using the number keypad on your remote.
2. Press the TOOLS button on your remote. The Tools menu appears.
5. Press the ENTERE button when done.
3. Select Add in the Tools menu, and then press the ENTERE button.
■■ Cancel Schedules: Cancel a show or channel you have scheduled.
✎✎ All deleted channels will be shown on the All Channels list. You add To cancel a scheduled show or channel, follow these steps:
channels back to the Added Channels list on the All Channels list.
the Programmed List icon on the left side of the Channel List screen,
✎✎ A gray-colored channel indicates the channel has been deleted from 1. Select
and then press the ENTERE button.
the Added Channels list.
2. On the Programmed List screen, select the show or channel entry you want to
cancel, and then press the TOOLS button. The Tools Menu appears.
✎✎ The Add menu option only appears for deleted channels.
3. Select Cancel Schedules, and then press the ENTERE button. The Cancel
■■ Add to Favorite/Delete from Favorite: Lets you add channels to and delete
Schedules screen appears.
channels from your Favorite Channels list.
4. Select OK, and then press the ENTERE button.
■■ Information: Display the information for a show or channel you have scheduled.
To add channels to the Favorite Channels list, follow these steps:
You can also change the schedule Information.
1. Select one or more channels in the All Channels list using the ▲/▼
buttons and the Yellow Select button on your remote.
1. Select the Programmed List icon on the left side of the Channel List screen,
2. Press the TOOLS button on your remote. The Tools menu appears.
and then press the ENTERE button.
3. Select Add to Favorite in the Tools menu, and then press the ENTERE
2. On the Programmed List screen, select the show or channel entry you want
button.
information for, and then press the TOOLS button. The Tools Menu appears.
To delete channels from the Favorite Channels list, follow these steps:
3. Select Information, and then press the ENTERE button. The Timer Viewing
1. Select one or more channels in the Favorite Channels list using the ▲/▼
Info screen appears.
buttons and the Yellow Select button on your remote.
4. Select Change Info, and then press the ENTERE button to change
2. Press the TOOLS button on your remote. The Tools menu appears.
information, or select Close, and then press the ENTERE button to close the
3. Select Delete from Favorite in the Tools menu, and then press the
Information screen.
ENTERE button.
■■ Select All / Deselect All: You can select or deselect all channels in the channel list.
■■ Timer Viewing: You can schedule a channel to be displayed automatically at
❑❑ Other Channel Menu Functions
a set time, even when you are watching another channel. You must set the
current time first in the Time > Clock function to use Timer Viewing.
Channel Mode (Added Channels/Favorite Channels)
To schedule a channel, follow these steps:
Lets you select the channel list displayed when you press the <CH>
1. Select a channel in the Added Channels list using the ▲/▼ buttons and
(Channel) button on your remote. For example, if you select Favorite Channels,
the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu appears.
you will only see Favorite channels when you press the <CH> button.
3. Select Timer Viewing in the Tools menu, and then press the ENTERE
Fine Tune
button. The Timer Viewing screen appears.
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
Analog channels only.
buttons to change the entries. Where numbers are displayed, you can
If the reception is clear, you do not have to fine tune the channel, as this is
also enter numbers directly using the number keypad on your remote.
✎✎ If you select Everyday or Every Week, the date you select in the done automatically during the search and store operation. If the signal is weak
or distorted, fine tune the channel manually.
Date field becomes the start date for your scheduled viewing.
✎✎ Select the channel, and then select Fine Tune.
For Everyday, the TV will turn on every day, at the time you
✎✎ Fine tuned channels that have been saved are marked with an asterisk
selected, starting from that date. For Every Week, the TV will
“*” on the right-hand side of the channel number in the channel banner.
turn on every week, on the same day of the week as the start
✎
✎To reset fine-tuning, select the channel, select Fine Tune, and then
date you selected, at the time you selected, from that day on. If
select Reset on the Fine Tune screen.
you select Once, the TV will turn on once, on the date and time
you selected.
5. Press the ENTERE button on your remote when done.
Setup Menu
✎✎ Only Added Channels can be scheduled.
✎✎ Scheduled programs and channels are displayed in the Programmed Plug & Play
List.
Lets you re-run the Plug & Play initial setup procedure. For instructions, see
✎✎ When you select a digital channel, press the ▶ button to view the
your Quick Start Guide.
digital program list. If you highlight a program in the list, and then
press the ENTERE(Schedule) button, you set Timer Viewing for
that program directly.
■■ Channel Name Edit: Analog channels only. Lets you assign a name of up to
five characters to an analog channel. For example, Hist, Food, Golf, etc. This
makes it easier to find and select a channel .
■■ Select All: Select all the channels in the displayed channel list.
■■ Deselect All: Deselect all the selected displayed channels.
✎✎ You can only select Deselect All when one or more channels are
selected.
■■ Auto Program: See Auto Program under Memorizing Channels.
Language
Set the menu language.
✎✎ Choose between English, Español, and Français.
❑❑ Setting the Time
Time
✎✎ The time you set will appear when you press the INFO button.
■■ Clock: Set the clock so you can use the various timer features of the TV.
✎✎ If you disconnect the power cord, you have to set the clock again.
To set the clock, follow these steps:
1.
Select Setup >Time > Clock.
Programmed List (on the Channel List Screen)
2. Press ENTERE and select Auto or Manual, and then press ENTERE again.
The Programmed list displays the channels and programs you have scheduled
If you selected Auto:
for viewing using the Timer Viewing function. You can view, modify, or delete a
The TV will automatically download the correct time from a digital channel.
show you have scheduled using the functions on the Programmed List screen
• Select Time Zone, and then press the ENTERE button. Use the▲/▼
buttons to select your Time Zone, and then press ENTERE.
Tools menu.
• Select DST (Daylight Savings Time), and then press ENTERE. Select On
if you want to turn the DST adjustment on and off manually. Select Off to
turn off the DST adjustment. Press ENTERE when done.
✎✎ The DST and Time Zone functions are only available when the Clock
Mode is set to Auto.
-8-
2016-11-29 오후 7:17:50
MEDIA.P
If you selected Manual:
The Clock Set screen appears. Use the ▲/▼ buttons to change the
values in each field or use the number buttons to enter the values
directly. Use the ◀/▶ buttons to move from field to field. When done
with all the fields, press ENTERE.
✎✎ Available only when Clock Mode is set to Manual.
■■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30, 60, 90,
120, 150 and 180 minutes).
✎✎ To cancel the Sleep Timer, select Off.
Eco Solution
The Program Rating Lock feature lets you block programs you've determined
are inappropriate for your children based on the program's ratings. To access the
Program Rating Lock feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also enter the same PIN.
✎✎ Program Rating Lock is not available in HDMI or Component mode.
✎✎ The default PIN number of a new TV set is “0-0-0-0”. You can set your
own PIN using the Change PIN function.
■■ Energy Saving (Off / Low / Medium / High): Lets you adjust the brightness of
the TV to reduce power consumption.
■■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV
switches to standby mode, if no picture is being received.
✎✎ Disabled when an attached PC is in power saving mode.
■■ Auto Power Off (Off / On): When Auto Power Off is set to On, the TV will
automatically turn off when no user operation is detected for 4 hours.
How It Works
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You can
set three different on/off timer settings.
✎✎ You must set the clock first.
■■ On Time / Off Time: Set the hour, minute, am/pm, and Activate/Inactivate
fields for the On Time and Off Time. Use the ◀/▶ buttons to move from
field to field. Use the ▲/▼ buttons to change the values in each field.
To activate the timer with the setting you have chosen, set the Activate/
Inactivate field to Activate.
■■ Volume: Set the desired loudness.
■■ Contents: To select what will be turned on when the timer setting is
activated. You can set the TV to turn on a specific channel or play back
contents such as photo or audio files.
Use the ◀/▶ buttons to move to the Contents field, and then press the
ENTERE button. The Contents screen appears. Use the ◀/▶ buttons to
move from field to field. Use the ▲/▼ buttons to change the values in
each field.
- TV/USB: Select TV or USB. The USB device must be connected to your TV
before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to select a
folder containing MP3 (Music) or JPEG (Photo) files on the USB device:
✎✎ The maximum number of files the TV can display, including sub
folders, in one folder of a USB storage device is 1000.
✎✎ The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
1. Use the ◀/▶ buttons to move to the field under Music or the field
under Photo, and then press the ENTERE button. The TV displays a
single folder (the Root folder) and the type or name of the device.
2. Press the ENTERE button. A list of folders on the device appears.
✎✎ If there are no folders on your device, press the Yellow select
button to select the Root folder, and then press the RETURN
button. The Timer screen re-appears.
3. Use the ▲/▼ buttons to highlight a folder that contains music or
photos, and then press the Yellow select button to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
■■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can select the days you want to activate the
timer by using the ◀/▶ buttons to highlight the day, and then pressing
the ENTERE button. To unselect a day, highlight it, and then press the
ENTERE button.
When you finished making all your selections on the Timer screen, press
either the ENTERE or RETURN button.
When you access the Program Rating Lock Menu functions for the first time, the
PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program
Rating Lock Menu appears. Every time you access the Program Rating Lock
functions, the PIN screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating Lock, and then
press ENTERE. Select On, and then press the ENTERE key again. Depending
on what type of programs or movies you want to block, select one of the options
on the screen, and then press the ENTERE button. The options are listed below:
■■ TV Parental Guidelines: You can block TV programs based on their ratings.
This function allows you to control what your children are watching.
■■ MPAA Rating: You can block movies based on their MPAA ratings. The
Motion Picture Association of America (MPAA) has implemented a rating
system that provides parents or guardians with advanced information on
which films are appropriate for children.
■■ Canadian English: You can block TV programs based on their Anglophone Canadian ratings.
■■ Canadian French: You can block TV programs based on their French Canadian ratings.
■■ Downloadable U.S. Rating: You can use parental restriction information while watching
DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same way for each
option. Each option displays a grid or table. All the tables have ratings listed on
the left. The TV Parental Guidelines option also has kinds of content listed across
the top: All: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual
situation / L: Adult Language / D: Sexually Suggestive Dialog.
To lock/block movies or shows with certain ratings and/or kinds of content,
click the square next to the rating and/or under the kind of content. A lock
appears. To unlock/unblock, click the square again. When you click a low
rating, all the ratings above it will also display locks. You can also Allow All or
Lock All. When done, press the RETURN button on your remote.
■■ Change PIN: Select Change PIN and the Change PIN screen appears.
Choose any 4 digits for your PIN, and then enter them in the Enter New
PIN fields. Re-enter the same 4 digits in the Confirm New PIN fields.
When the Change PIN screen disappears, press the OK button. The TV has
memorized your new PIN.
✎✎ If you forget the PIN, press the remote-control buttons in the
following sequence, which resets the pin to “0-0-0-0” : POWER
(off) → MUTE → 8 → 2 → 4 → POWER (on)
Caption
(On-Screen Text Dialogue)
■■ Caption: You can switch the caption function on or off. If captions are not
available, they will not be displayed on the screen.
✎✎ The Caption feature does not work in Component or HDMI mode.
■■ Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption
function operates in either analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the broadcasting signal, the
Analog Caption function may or may not work with digital channels.)
❑❑ Other Features
Voice Guide (On/Off)
You can activate voice guides that describe the menu options aloud to aid the
visually impaired.
■■ Voice Guide: Enable or disable the Voice Guide feature. Voice Guide is
provided in the current language.
■■ Volume: Set the volume of the voice guide.
■■ Pitch: Set the pitch of the voice guide.
■■ Speed: Set the speed of the voice guide.
Game Mode (On/Off)
When you connect a game console such as a PlayStation™ or Xbox™ to your TV,
you can enjoy a more realistic gaming experience by turning on the Game Mode
function.
✎✎ Precautions and limitations for game mode:
xx Before you disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
xx If you display the TV menu in Game Mode, the screen shakes slightly.
✎✎ Game Mode is not available when the input source is set to TV.
✎✎ After connecting the game console, set Game Mode to On. You may
notice slightly reduced picture quality.
xx If a file you deleted from the PC is still found when you run Media
Program Rating Lock
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital channels only) The Digital
Captions function works with digital channels.
✎✎ Service1~6 may not be available in digital caption mode depending on the broadcast.
■■ Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard, and Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7. The default is Style 0.
Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow,
Magenta, and Cyan. You can change the color of the letters. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue,
Yellow, Magenta, and Cyan. You can change the background color of the
captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include Default,
Transparent, Translucent, Solid, and Flashing.
Background Opacity: This adjusts the opacity of the caption background.
Options include Default, Transparent, Translucent, Solid, and Flashing.
Return to Default: This option sets Size, Font Style, Foreground Color,
Background Color, Foreground Opacity, and Background Opacity to its default.
✎✎ Digital Caption Options are available only when you can select Default
and Service1 ~ Service6 in Caption Mode.
✎✎ The Foreground and Background cannot be set to the same color.
Boot Logo
Enable or disable the display of the Samsung logo when you turn on the TV.
-9-
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xx Photos only supports the sequential jpeg format.
xx The Videos option does not support the scene search and
thumbnail functions.
xx If the number of files and folders saved on a USB storage device is
over approximately 4000, the files and folders may not appear and
some folders may not open.
xx The maximum displayed number of files, including sub folders, in
one folder of a USB storage device is 1000.
xx The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
Application Menu
Enjoy photos, music, and/or movie files saved on a USB Mass
Storage Class (MSC) device.
Videos
1.In the Media Play menu, press the ◀ or ▶ button to select Videos, and then
press the ENTERE button.
2. Press the ◀/▶/▲/▼ buttons to select a video in the file list.
3. Press the ENTERE button or ∂ (Play) button.
-- The file name is displayed on the top of the screen with the
playing time.
-- If video time information is unknown, playing time and the
progress bar are not displayed.
-- During video playback, you can search using the ◀ and ▶ buttons.
✎✎ In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
yy Supported Subtitle Formats
-- External
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie files to the USB
jack on the back of the TV. A pop up window appears.
3. Press the MEDIA.P button on your remote. The Media Play menu appears.
❑❑ Using the Media Play Menu
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press the ▲ or ▼ button to select Applications
on the left, and then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), and then press the
ENTERE button.
3. Press the ◀ or ▶ button to select an icon (Videos, Music, Photos, Settings),
and then press the ENTERE button.
✎✎ Media Play might not work properly with unlicensed multimedia files.
✎✎ Read the list below before using Media Play (USB)
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
xx The file system supports FAT16, FAT32, and NTFS.
xx Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices.
--
Internal
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives and Flash Card Readers.
Devices should be connected directly to the TV’s USB port. USB
HDD is not supported.
xx Before connecting your device to the TV, please back up your
files to prevent file damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
xx A USB device that requires high power (more than 0.5A) may not be
supported.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display
on the screen.
xx The maximum supported JPEG resolution is 15360 x 8640 pixels.
xx If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
xx The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
xx PTP (Pier to Pier) devices are not supported.
xx If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be recognized
or may malfunction.
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Container
AVI
MKV
MKV
MKV
MP4
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
File
Extension
Auto Protection Time
■■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
screen remains idle with a still image for a certain period of time you define,
the screen saver is activated to prevent the formation of ghost images on
the screen.
Container
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.3gpp
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.divx
*.dat
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
*.webm
WebM
Video Codec
Resolution
Motion JPEG
640x480
Frame
rate(fps)
Bit rate
(Mbps)
Audio
Codec
8
H.264 BP/
MP/HP
H. 264 BP /
MP / HP
Divx 3.11 / 4
/5/6
MAX 30
1920x1080
30
MPEG4 SP/
ASP
Window
Media Video
v9(VC1)
MPEG2
Dolby
Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby
Digital
Plus
MPEG(MP3)
DTS (Core ,
LBR)
G.711(ALaw, μ-Law)
MPEG1
VP8
Media Play - Additional Functions
HD Connection Guide
yy Codecs may not function properly if there is a problem with the content.
yy Video content will not play or will not play correctly if there is an error in the
content or container.
yy Sound or video may not work if they have bit rates/frame rates above the
TV’s compatibility ratings.
yy If the Index Table contains an error, the Seek (Jump) function will not work.
yy When the TV is playing video over a network connection, the video may not
play smoothly because of data transmission speeds.
yy Some USB/digital camera devices may not be compatible with the TV.
yy When the TV is playing a video at a bit rate of 10 Mbps or higher, the menu
screens may be displayed slowly.
■■ Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Refer to this information when connecting external devices to the TV.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.
GMC 2 or above is not supported.
Audio Decoder
WMA 10 Pro supports up to 5.1 channels. Supports up to the M2 profile. WMA lossless
audio is not supported.
QCELP and AMR NB/WB are not supported.
Vorbis is supported for up to 2 channels.
Dolby Digital Plus is supported for up to 5.1 channels.
The DTS LBR codec is only available for MKV / MP4 /TS containers.
Music
1. In the Media Play menu, press the ◀ or ▶ button to select Music, and then
press the ENTERE button.
2. Press the ◀/▶/▲/▼ buttons to select the desired Music in the file list.
3. Press the ENTERE button or ∂ (Play) button.
✎✎ During music playback, you can search using the ◀ and ▶ button.
✎✎ � (REW) and µ (FF) buttons do not function during play.
✎✎ Media Play only displays files with an MP3 or PCM file extension. Other file
extensions are not displayed, even if they are saved on the same USB device.
✎✎ If the sound is abnormal when the TV plays MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file may cause
a sound problem.)
Photos
1. In the Media Play menu, press the ◀ or ▶ button to select Photos, then
press the ENTERE button.
2. Press the ◀/▶/▲/▼ buttons to select a photo in the file list.
3. Press the ENTERE button or ∂ (Play) button.
✎✎ NOTE
xx While a photo list is displayed, press the ∂ (Play) / ENTERE
yy Supported Video Formats
1920x1080
6~30
20
Vorbis
button on the remote control to start a slide show.
xx All files in the file list section will be displayed in the slide show.
xx During the slide show, files are displayed in order.
xx During the slide show, you can adjust the slide show speed
Protection Time, the Screen saver will run.
xx The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
xx If you use a USB extension cable, the TV may not recognize the USB
device or may not be able to read the files on the device.
xx If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
Operation
Title
Repeat Mode
Picture Size
Picture Mode
Sound Mode
You can adjust the picture size to your preference.
Subtitle Settings
You can play the video with Subtitles. This
function only works if the subtitles have the same
file name as the video.
You can select another video file to play directly.
You can play movie and music files repeatedly.
You can adjust the picture setting.
You can adjust the sound setting.
Audio Format
You can select the digital audio output format.
Audio Language
You can change the audio language if the video
has more than one language.
Videos
c
c
c
c
c
Music
Photos
c
c
c
c
Image
JPEG
Photo
Base-line
Progressive
Resolution
15360 x 8640
1024 x 768
Other Restrictions
yy CMYK, YCCK Color space JPEG are not supported.
Playing Multiple Files
■■ Playing selected video/music/photo files
1. On the File List screen, highlight a file, and then press the Yellow button on your remote.
2. Repeat Step 1 to select multiple files.
✎✎ NOTE
3. Press the TOOLS button, select Play Selected Contents, and then press the
ENTERE button.
■■ Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the ◀/▶/▲/▼ buttons to
highlight a folder.
2. Press the TOOLS button, select Play Folder, and then press the ENTERE button.
Other Information
c
To prevent the TV from falling
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show.
c
Slide Show Speed
You can select the slide show speed during
the slide show.
c
Background
Music
Zoom
Rotate
You can set and select background music when
watching a Slide Show.
c
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the wall mount items. Contact a technician
for assistance when installing the wall mount bracket. Samsung
Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
c
c
Wall Mount Kit Specifications (VESA)
Information
You can see detailed information about the
played file.
You can zoom into images in full screen mode.
You can rotate images in full screen mode.
c
c
c
Settings
Using the Setup Menu
■■ DivX® Video On Demand: Shows the registration code authorized
for the TV. If you connect to the DivX web site and register
with the 10-digit registration code, you can download the
VOD activation file. Once you play it using Media Play, the
registration is completed.
✎✎ For more information on DivX® VOD, visit “http://vod.divx.com”.
■■ Information: Select to view information about the connected USB
device.
❑❑ Using Sports Mode t
This mode provides optimized conditions for watching soccer and other
sports.
yy A (Zoom): Pauses playback and divides the picture into 9 parts. Select a
part to zoom it in.
✎✎ When Sports Mode is On, the picture and sound modes are set to
Stadium automatically.
✎✎ If you turn the TV off while Sports Mode is on, Sports Mode is turned
off.
Support Menu
✎✎ Media Play can play Music files automatically during a Slide Show if
Background Music is set to On.
✎✎ You cannot change the Mode in Background Music until the
Background Music file has finished loading.
yy Supported Photo Formats
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centers and how to download products and software.
Installing the Wall Mount Kit
c
✎✎ The wall mount kit is not supplied, but sold separately.
✎✎ Since the necessary clamps, screws, and string are not supplied,
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest
dealer. If you install the TV on a ceiling or slanted wall, it may fall and
result in severe personal injury.
✎✎ NOTE
ꞏꞏ Standard dimensions for wall mount kits are shown in the table
below.
ꞏꞏ When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
ꞏꞏ Do not use screws that do not comply with the VESA standard
screw specifications.
ꞏꞏ Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
ꞏꞏ For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
ꞏꞏ Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
ꞏꞏ Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
ꞏꞏ Do not mount the TV at more than a 15 degree tilt.
ꞏꞏ Always have two people mount the TV on a wall.
Product Family TV size in inches
Self Diagnosis
Caution: Pulling, pushing, or climbing onto the TV may
cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV; doing so may cause
the TV to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included
Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
Contact Samsung
c
using (π) (REW) or (µ) (FF) button.
Deselect All, and then the ENTERE button.
- 10 -
Category
xx You can move to other files using ◀ or ▶ button.
xx A c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button, select
xx If the TV has no input during the time period set in Auto
Securing the TV to the Wall
Other Restrictions
LED-TV
19
■■ Picture Test: Use to check for picture problems. If the problem appears in
the test picture, select Yes and follow the directions on the screen.
■■ Sound Test: Use the built-in melody sound to check for sound problems.
If the problem occurs during the test, select Yes and follow the directions
on the screen.
■■ Signal Strength: (Digital channels only) An HD channel’s reception quality
is either perfect or the channels are unavailable. Adjust your antenna to
increase signal strength.
VESA screw hole specs
(A * B) in millimeters
Standard
Screw
Quantity
75 X 75
M4
4
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
2. Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎✎ Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV. Untie the
string before moving the TV.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information
on proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is
beside the “K” icon.
✎✎ The position and color may differ depending on the model.
Caution of the cover-jack
CAUTION: The cover-jack is for use by qualified service
personnel only. To reduce the risk of electric shock or fire
hazard, do not use the cover jack, unless you are qualified
to do so.
TV Rear Panel
Cover-jack
✎✎ The rear panel may differ depending on the model.
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
■■ Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN. Change the PIN using the Change PIN
option.
Software Upgrade
Software Upgrade can be performed by downloading the latest firmware
from samsung.com to a USB memory device.
Use Mode
You can turn the TV into a display model for retail environments by setting
Use Mode to Store Demo.
✎✎ For all other uses, select Home Use.
✎✎ With Store Demo, some functions are disabled, and the TV
automatically resets itself after a preset amount of time.
- 11 -
- 12 -
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com, then
click on Support, or call Samsung customer service at 1-800-SAMSUNG.
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change the cable/satellite box resolution.
Caption on the TV menu is greyed out.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
Specifications
Problem
Possible Solution
The picture is black and white.
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy
efficiency features such as the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
yy Energy saving : MENU → Setup → Eco Solution → Energy Saving → Select Settings
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input
1 on the TV.
There is a plastic smell from the TV.
• This smell is normal and will dissipate in a few days.
When changing channels, the picture
freezes or is distorted or delayed.
• If the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord, and
then wait until the cable box reboots. It may take up to 20 minutes.)
• Set the output resolution of the cable box to 1080i or 720p.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
• This function is only available for digital channels received through an Antenna / RF/Coax connection.
Sound Problems
Perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
If you find that the color on your Samsung television’s screen is not correct or black and white, first run a Self
Diagnosis Test on the TV to make sure there are no device issues.
yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when you select the TV source.
Model Name
yy If the test is ok, try making sure ;
There is no sound or the sound is too
low at maximum volume.
• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
Your settings are lost after 30 minutes
or every time the TV is turned off.
The picture is good, but there is no
sound.
• If you are using an external device, check the device’s audio output option Ex. you may need to change your
cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device’s power cable.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV
mode, go to MENU → Setup → Plug & Play → ENTERE.
You have intermittent loss of audio
or video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
With stand
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
Weight
Without Stand
With Stand
Component Connections /
Screen Color
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some
settings you should check before calling for a repair.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to “Picture” in the Menu, and then try
adjusting these options.
Unwanted Powering off
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
The speakers are making an
inappropriate noise.
No Picture, No Video
The TV will not turn on.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
yy Sleep Timer : User Menu → Setup → Time → Sleep Timer
The TV turns off automatically.
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
There is no picture/video.
Trouble Powering On
Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on
the TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting
a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or
satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
• If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation
Guide.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
The TV image does not look as good as
it did in the store.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
✎✎ Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
Others
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
- 13 -
UF4000_ZC_BN68-08226B-00_ENG_19inch.indb 2
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source by pressing the SOURCE button on the remote control.
• Reboot the connected device by unplugging and then reconnecting the device's power cable.
• Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
There is poor color or brightness.
✎✎ You can watch detailed troubleshooting videos at www.samsung.com/spsn.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com → Support → Downloads). To
Ensure the Sleep Timer is set to Off in the Time menu.
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged securely into the wall outlet and the TV.
When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
No Caption on digital channels.
• Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
•
•
•
•
• Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list.
Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
First, perform the Picture Test and to see if your TV is displaying the test image properly.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The color is wrong or missing.
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
The TV is not receiving all channels.
Cannot find a channel
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
dark pixels on the screen. These pixels will have no impact on the performance of the product.
upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then
select Support > Software Upgrade in the TV's menu.
Purple/green rolling horizontal bars
and buzzing noise from the TV speakers
with Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the
set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
The picture will not display in full
screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on
the TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work.
• Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
- 14-
UN19F4000
Display Resolution
Screen Size
(Diagonal)
1366 x 768
19" Class
(18.5" measured diagonally)
Sound
Output
3W x 2
Dimensions (W x H x D)
Body
17.8 X 11.0 X 1.9 inches
(453.7 X 281.3 X 49.5 (mm))
17.8 X 12.3 X 4.9 inches
(453.7 X 314.2 X 124.9 (mm))
5.5 lbs (2.5 kg)
5.7 lbs (2.6 kg)
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
✎✎ For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.
✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/
recyclingdirect or call, (877) 278-0799.
Storage and Maintenance
✎✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to
prevent scratches.
RF (Cable/Antenna) Connection
Poor Picture
The picture is distorted has macroblock
error, small block, dots, pixelization.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Clean the product with a soft cloth
dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene,
thinners) or a cleaning agent.
Do not spray water directly onto the product.
Any liquid that goes into the product may
cause a failure, fire, or electric shock.
License
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the
DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369;
RE45,052.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with
the Symbol, DTS Premium Sound, DTS Digital Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries.
© DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in
combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or
other countries. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.
- 15 -
- 16 -
2016-11-29 오후 7:17:52
Download PDF

advertising