Samsung | HLN437W | Samsung HLN617W User Manual

DLPTV
DLPTV
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America
Service Division
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
www.samsungusa.com
Samsung Electronics Canada Inc.
Samsung Customer Care
7037 Financial Drive
Mississauga, Ontario
L5N 6R3
www.samsung.ca
BP68-00188A-00
I N S T R U C T I O N
M A N U A L
HLN467W1/HLN567W1/HLN4365W1/HLN5065W1/HLN437W1
HLN507W1/HLN617W1
Safety Instructions
Warning! Important
Safety Instructions
CAUTION
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung projection TV represents the latest in Digital Light
Processing television technology. We designed it with easy-to-use on-screen menus and closed captioning
capabilities, making it one of the best products in its class. We are proud to offer you a product that will
provide convenient, dependable service and enjoyment for years to come.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Important Safety Information
Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries, keep
these safety precautions in mind when installing, using, and maintaining your unit.
• Read all safety and operating instructions before operating your TV.
This symbol indicates high voltage is present. It is dangerous to make any kind of contact
with any part inside this product.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the TV and in the operating instructions.
This symbol alerts you that important literature concerning operation and maintenance has
been included with this product.
CAUTION: FCC/CSA regulations state that any unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
CAUTION: To prevent electric shock, match the wide blade of plug to the wide slot, and fully
insert the plug.
ATTENTION: Pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu’au fond.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention
to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I),
that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building as close to the point of cable entry as
possible.
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs
is an infringement of U.S. copyright laws. Certain Canadian programs may also be copyrighted
and any unauthorized recording in whole or in part may be in violation of these laws.
To prevent damage which may result in fire or electric shock,
do not expose this appliance to rain or moisture.
2
• Unplug the TV from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol
cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions
can increase the risk of fire, electric shock, or other personal injury.
• Do not use the TV where contact with water is possible, such as near bath tubs, sinks, washing
machines, swimming pools, etc.
• Do not place the TV on an unstable cart, stand, tripod, bracket, or table
where it can fall. A falling TV can cause serious injury to a child or adult,
and serious damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer or sold with the TV.
Follow the manufacturer’s instructions when mounting the unit, and use a
mounting accessory recommended by the manufacturer. Move the TV and
cart with care. Quick stops, excessive force, and uneven surfaces can
make the unit and cart unsteady and more likely to overturn.
• The TV is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block
these openings with any object, and do not put the TV on a bed, sofa, rug, or other similar surface.
Do not put the TV near a radiator or heat register. If you do put the TV on a rack or bookcase, make
sure that there is adequate ventilation and that you’ve followed the manufacturer’s instructions for
mounting.
• Operate your TV only from the type of power source indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug still does not fit, contact an electrician to replace your outlet.
3
Safety Instructions
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or
pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm
or when left unattended and unused for long periods of time. This will prevent damage to the unit from
lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, be extremely careful to keep from touching the
power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points
or damage parts. Never spill liquid of any kind on the TV.
• Ground outdoor antennas. If an outside antenna or cable
system is connected to the TV, be sure the antenna or cable
system is grounded so as to provide some protection against
voltage surges and built up static charges. Section 810 of
the National Electrical Code, ANSI/NFPA No.70-1984,
provides information about proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF
ANTENNA GROUNDING
ANTENNA
LEAD IN WIRE
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC — NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel. Unplug the
unit from the wall outlet and refer servicing to qualified service personnel when:
- The power-supply cord or plug is damaged
- Liquid has been spilled on the unit or if objects have fallen into the unit
- The TV has been exposed to rain or water
- The TV does not operate normally by following the operating instructions
- The TV has been dropped or the cabinet has been damaged
- The TV exhibits a distinct degradation in performance
- When the LAMP(BULB ONLY) replacement procedure on pg. 11 is unsuccessful
• If you make adjustments yourself, adjust only those controls that are covered by the operating
instructions. Adjusting other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified
by the manufacturer or those that have the same characteristics as the original part. Unauthorized
substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks
to determine that the TV is in a safe operating condition.
4
FCC Information
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the
following warning:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation .
If this equipment does cause harmful interference
to radio or television receptions, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
User Information
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the equipment.
If necessary, consult your dealer or an
experienced radio/television technician for
additional suggestions. You may find the booklet
called How to Identify and Resolve Radio/TV
Interference Problems helpful. This booklet was
prepared by the Federal Communications
Commission. It is available from the U.S.
Government Printing Office, Washington, DC
20402, Stock Number 004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
3351 Michelson Drive,
Suite #290, Irvine, CA92612 USA
Warning
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Provided with this monitor is a detachable power
supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed
personal computer with similar configuration.
Before making the connection, make sure the
voltage rating of the computer convenience outlet
is the same as the monitor and that the ampere
rating of the computer convenience outlet is equal
to or exceeds the monitor voltage rating. For 120
Volt applications, use only UL Listed detachable
power cord with NEMA configuration 5-15P type
(parallel blades) plug cap. For 240 Volt
applications use only UL Listed Detachable power
supply cord with NEMA configuration 6015P type
(tandem blades) plug cap.
IC Compliance Notice
This Class B digital apparatus meets all
requirements of the Canadian Interference-Causing
Equipment Regulations.
Notice de Conformité IC
Cet appareil numérique de classe B respecte
toutes les exigences du Règlement sur les
équipements produisant des interférences au
Canada.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numéique de la classe B est
conforme à la norme NMB-003 du Canada.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause unesired operation.
This television receiver provides display of
television closed captioning in accordance with
§15.119 of the FCC rules.
5
Table of Contents
Your New Wide TV ..........................................................................................10
Special Features ...............................................................................................50
Replacing the Lamp ..............................................................................................10
List of Features .....................................................................................................12
Checking Parts.....................................................................................................12
Side Panel Buttons................................................................................................13
Side Panel Jacks ................................................................................................. 13
Front Panel LED Indicators .....................................................................................14
Rear Panel Jacks ..................................................................................................15
Remote Control ....................................................................................................16
Installing Batteries in the Remote Control.....................................................17
Setting Up Your Remote Control .............................................................................50
Remote Control Codes ..........................................................................................53
Fine Tuning Channels ...........................................................................................54
LNA (Low Noise Amplifier)....................................................................................55
Selecting the Color Tone .......................................................................................56
Setting the Film Mode...........................................................................................56
...........................................................57
DNIeTM (Digital Natural Image engine)
Digital Noise Reduction ........................................................................................58
Setting the Blue Screen Mode................................................................................59
Changing the Screen Size.....................................................................................60
Special Audio Options .........................................................................................61
MTS Settings: Choosing a Soundtrack ........................................................61
Virtual Dolby ...........................................................................................62
BBE ........................................................................................................63
Auto Volume ............................................................................................64
Setting The On/Off Melody ..................................................................................65
Viewing Closed Caption Information ......................................................................66
Viewing Picture-in-Picture.......................................................................................67
Selecting a PIP Screen ..............................................................................67
Selecting an External Signal ......................................................................68
Selecting a Signal Source (Antenna or Cable) for PIP ...................................69
Swapping the Contents of the PIP and Main image......................................70
Changing the Size of the PIP image ...........................................................71
Changing the Location of the PIP Image......................................................72
Changing the Picture-in-Picture Channel ......................................................73
Selecting the Sound Source .......................................................................74
Using the V-Chip ..................................................................................................75
Connections .....................................................................................................20
Connecting VHF and UHF Antennas.......................................................................20
Antennas with 300-ohm Flat Twin Leads .....................................................20
Antennas with 75-ohm Round Leads ...........................................................20
Separate VHF and UHF Antennas ..............................................................21
Connecting Cable TV and VCR..............................................................................22
Cable without a Cable Box .......................................................................22
Cable with a Cable Box that Descrambles All Channels ...............................22
Connecting a Cable Converter Box............................................................23
Connecting a Cable Converter Box and a VCR ...........................................23
Connecting a Camcorder......................................................................................24
Connecting a DVD Player .....................................................................................25
Connecting to Y,PB,PR ..............................................................................25
Connecting to audio and video jacks .........................................................25
Connecting a DTV Set Top Box ..............................................................................26
Connecting to Y,PB,PR ..............................................................................26
Connecting to DVI (Digital Visual Interface) .................................................26
Connecting to R,G,B.................................................................................27
Operation........................................................................................................30
Turning the TV On and Off....................................................................................30
Viewing the Menus and Displays ...........................................................................30
Selecting the Menu Language................................................................................31
Selecting the Antenna Input ...................................................................................31
Channel Memory .................................................................................................33
Changing Channels..............................................................................................34
Selecting Your Favorite Channels ...........................................................................35
Scanning Channels ..............................................................................................36
Labeling the Channels ..........................................................................................37
Picture Control .....................................................................................................38
Sound Control .....................................................................................................40
Setting the Clock..................................................................................................42
Setting the Timers .................................................................................................43
Viewing an External Signal Source ........................................................................46
6
PC Display.......................................................................................................82
Using Your TV as a Computer (PC) Display .............................................................82
How to connect Your PC to the TV .............................................................82
How to Set up Your PC Software (Windows only) ........................................83
Display Modes.........................................................................................84
How to Set up Your TV as a PC display ..................................................................85
Picture Quality Adjustment ....................................................................................86
Changing the Position of the Image (Moving left, right, up and down) .......................88
Changing the Screen Size (PC mode).....................................................................90
Appendix.........................................................................................................94
Troubleshooting ...................................................................................................94
Care and Maintenance.........................................................................................95
Using Your TV in Another Country..........................................................................95
Specifications ......................................................................................................95
7
SAMSUNG
Your New Wide TV
Your New Wide TV
Replacing the Lamp
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
• Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be
replaced periodically.
After replacing the lamp, the screen quality will be bright and clear as new.
1
Unplug TV, then use a
screwdriver to remove the
screw as shown in the
picture.
(HLN467W1/HLN567W1:
Remove the rubber cap
and unscrew the screw.)
2
Remove the Lamp cover.
(HLN467W1/HLN567W1:
Exert a bit of force to the
right and pull for easy
opening.)
3
Use a screwdriver to
remove the screws
securing the Lamp. There
are 2 screws: one on the
left and one on the right.
When the screws have
been completely
unfastened, they will still
be connected to the body
of the Lamp.
4
Separate the Lamp from
the engine by holding the
handle and pulling it out.
5
To reinstall the Lamp,
follow these steps in
reverse order.
• When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front
(Timer, Lamp, & Temp.) are flashing.
• Check before lamp replacement
1. The lamp must be the same code number and type.
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case.
3. After checking the code number for the lamp, give the code number to the store where you
purchased the TV or to a Samsung Service center.
… HLN437W1/HLN507W1
HLN617W1/HLN4365W1
HLN5065W1
… HLN467W1/HLN567W1
• Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV.
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside
the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children.
… HLN437W1/HLN507W1
HLN617W1/HLN4365W1
HLN5065W1
… HLN467W1/HLN567W1
NOTES
10
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screw.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
11
Your New Wide TV
List of Features
Side Panel Buttons
Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
•
•
•
•
•
•
•
•
•
•
•
•
•
The buttons on the side panel control your TV’s basic features, including the on-screen menu system.
To use the more advanced features, you must use the remote control.
œ HLN467W1
œ HLN567W1
Easy-to-operate remote control
Easy-to-use on-screen menu system you can access from the side panel or remote control
Automatic timer to turn the TV on and off at any time you choose
Adjustable picture and sound settings and the ability to memorize your favorite settings
Automatic channel tuning for up to 181 channels
A special filter to reduce or eliminate reception problems
Fine tuning control for the sharpest picture possible
A built-in multi-channel sound decoder for stereo and bilingual listening
Built-in, dual channel speakers
A special sleep timer
Picture-in-Picture capability that lets you watch two channels at once
Widescreen TV with adjustable image size
Life-like clear images provided by DNle technology
œ HLN617W1
œ
œ
œ
œ
HLN437W1
HLN507W1
HLN4365W1
HLN5065W1
ΠTV/VIDEO
Press to switch between viewing TV programs and signals from connected
components.
´ MENU
Press to see the on-screen menu.
ˇ ▼ CH ▲
Press to change channels and move between items on the on-screen menu.
¨ VOL +, –
Press to lower or raise the volume and to select items when using the onscreen menu.
Checking Parts
ˆ ENTER
Press to activate (or change) a particular item.
Once you have unpacked your TV, check to make sure that you have all the parts shown here.
If any piece is missing or broken, call your dealer.
Ø POWER
Side Panel Jacks
Press to turn the TV on and off.
Use the side panel jacks to connect a component that is used only occasionally (a camcorder or video
game, for example).
œ HLN467W1
œ HLN567W1
œ HLN437W1
œ HLN4365W1
This Manual
Television
Remote Control
(BP59-00048A)/
AAA Batteries
(4301-000121)
Warranty Card
œ HLN507W1
œ HLN617W1
œ HLN5065W1
ΠVIDEO Input jack
Connect the video signal from a camcorder or video game.
´ AUDIO Input jacks
Connect the audio signal from a camcorder or video game.
ˇ S-VIDEO Input jack
Connect an S-video signal from a camcorder or video game.
(S-Video 3 jack and Audio L/R input 3 are used in conjunction.)
12
13
Your New Wide TV
Front Panel LED Indicators
Rear Panel Jacks
The three lights on the front panel indicate the status of your TV.
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and
three set of component video input jacks on the rear panel of your TV. For more information, please see
“Connections”.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
: Light is On
: Light is Blinking
: Light is Off
Timer
Lamp
Temp
Indication
Auto Timer ON/OFF has been set.
Standby state.
The picture will automatically appear in about 25 seconds.
Auto Timer ON/OFF has been set and the set will automatically be turned on in
about 25 seconds.
ΠANTENNA terminals
Two independent cables or antennas can be connected to these
terminals. Use ANT-A and ANT-B terminals to receive a signal from
VHF/UHF antennas or your cable system. Use the ANT A-OUT
terminal to send the signal being received by the ANT-A terminal out
to another component (such as a Cable Set Top Box).
The PIP channel can be received only when a signal source is
connected to ANT-A.
ˆ Component1, 2, 3 jacks (Y, PB, PR, L, R)
Use these jacks to connect the component video/audio signals from a
DVD player or a set top box when using the component video input
jacks.
´ S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
∏ DVI (Digital Video Interface) jack
Receives the digital signals from a set top box or PC etc.
ˇ VIDEO/AUDIO INPUT jacks(VCR1, VCR2)
Connect video/audio signals from external sources, such as a VCR or
DVD players.
” RS-232 jack
The RS232 jack is for repair and software upgrades.
A cooling fan inside the set is not operating normally.
Lamp cover on rear of the set is not properly shut.
Check if the ventilation hole on the rear of the set is blocked, because if the
inner temperature is too high, the power will shut off.
Lamp may be defective. Please contact a certified technician.
• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
• The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
14
¨ VIDEO/AUDIO MONITOR OUTPUT jacks
Sends a video signal from the TV to an external source, such as a
VCR.
Note: Monitor Out is available only in RF, Video and S-Video modes.
Ø PC/DVI AUDIO INPUT jacks
Connect these to the audio-output jacks on your PC or set top box.
’ PC VIDEO INPUT jack
Connect to the video output port on your PC.
15
Your New Wide TV
Remote Control
Installing Batteries in the Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote,
always point it directly at the TV. The remote control can also operate your Set Top Box, VCR, cable box,
and DVD player.
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote
control for a long time, remove the batteries and store them in a cool dry place.
1.
17. UP, Down, Left, Right
(▲, ▼, œ, √)/ENTER
POWER
Turns the TV on and off.
2.
Adjust the TV sound by selecting one of the
preset factory settings (or select your personal,
customized sound settings.)
3.
P.MODE
4.
+100
5.
VOL -, VOL +
Adjust the TV picture by selecting one of the
preset factory settings (or select your personal,
customized picture settings.)
Press to increase or decrease the volume.
MUTE
Press to mute the TV sound.
7.
8.
FAV.CH (Favorite Channel)
Press to switch between your favorite channels.
STILL
Press to stop the action during a particular
scene. Press again to resume normal video.
10. P.SIZE
Press to change the screen size.
2
Install two AAA size batteries.
Make sure to match the “+” and
“–” ends of the batteries with the
diagram inside the compartment.
3
Slide the cover back into place.
18. MTS(Multichannel
Television Stereo)
Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
19.
SURROUND
20. ADD/DEL
Press to add or erase channels in the TV’s
memory.
Use the ADD/DEL button to memorize/erase
the fine tuning after fine tuning channels.
21. SLEEP
Press to select a preset time interval for
automatic shutoff.
Activates picture in picture.
23. SET
Used during set up of this remote control, so
that it will work compatibly with other devices
(VCR, STB, cable box, DVD, etc.)
24. DNIe
Activates DNIe (Digital Natural Image engine).
25. PIP controls
11. MODE
Selects a target device to be controlled by the
Samsung remote control (i.e., TV, VCR, Cable, or
DVD).
12. PRE-CH
Tunes to the previous channel.
13. TV/VIDEO
Press to display all of the available video
sources (i.e., TV, STB, VCR, DVD, DTV, PC).
14. CH
and CH
(Channel Up/Down)
Press CH
Slide the back cover all the way out
to open the battery compartment of
the remote control.
22. PIP
MENU
Displays the main on-screen menu.
9.
1
Press to hear the Dolby surround effect.
Press to select cable channels over 100 on TV.
6.
Press to select highlight up, down, left, or right.
While using the on-screen menus, press ENTER
to activate (or change) a particular item.
S.MODE
or CH
to change channels.
15. INFO
Press to display information on the TV screen.
16. EXIT
SWAP; Exchanges the video signal that is
currently displayed on the main screen with the
signal in the PIP window.
SIZE; Press to make the PIP window larger or
smaller.
CH(PIP); Displays the available channels in
sequence. (These buttons change channels in
the PIP window only.)
26. VCR controls
Controls VCR tape functions: Rewind, Play, Fast
Forward, Stop, Pause.
27. RESET
If your remote control is not functioning
properly, take out the batteries and press the
reset button for about 2~3 seconds. Re-insert
the batteries and try using the remote control
again.
Press to exit the menu.
16
17
SAMSUNG
Connections
Connections
Connecting VHF and UHF Antennas
Separate VHF and UHF Antennas
If you do not have a cable system, you will need to connect an antenna to your TV.
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the
two antenna signals before connecting them to the TV. This requires a combiner attachment, which
you can buy at an electronics store.
Antennas with 300-ohm Flat Twin Leads
If your antenna looks like this:
1
2
it has 300-ohm flat twin leads.
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into the
ANT-A terminal on the
back panel of the TV.
Place the wires from the twin
leads under the screws on the
300-75 ohm adapter. Use a
screwdriver to tighten the
screws.
Plug the adapter into the
ANT-A terminal on the back
panel of the TV.
Antennas with 75-ohm Round Leads
If your antenna looks like this:
1
20
it is an antenna with 75-ohm round leads.
Plug the antenna lead into the
ANT-A terminal on the back
panel of the TV.
21
Connections
Connecting Cable TV and VCR
You can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
1
Connecting a Cable Converter Box
This connection allows you to watch cable and premium channels. You should keep your TV
selected to ANT-A so that you can use the TV features. When viewing premium channels, select
ANT-B and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the
converter box to change channels. You will need two coaxial cables.
Note: When you use a converter box with
your TV, there may be features that you can
not program using the remote control, such
as programming your favorite channels and
blocking channels.
From Cable
Plug the incoming cable
into the ANT-A terminal on
the back of the TV.
Cable with a Cable Box that Descrambles All Channels
Connecting a Cable Converter Box and a VCR
1
2
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box. This
terminal might be labeled
“ANT OUT”, “VHF OUT”
or simply, “OUT”.
This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to ANT-A so that you can use the TV’s
features. When viewing premium channels or recording with the VCR, select ANT-B (whichever
channel is vacant in your area), then use the converter box to change channels.
TV Rear Panel
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and ANT-A. One output of the splitter
goes to ANT-A and the second output is
connected to IN on the cable converter
box.
From
Cable
Connect the other end of
this cable to the ANT-A
terminal on the back of the
TV.
If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to video1 simultaneously.
Stereo VCR
22
When you use a converter box with your
TV there may be features that you can not
program using the remote control, such as
programming your favorite channels and
blocking channels.
23
Connections
Connecting a Camcorder
Connecting a DVD Player
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y,PB,PR
1
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the AUDIO
terminals on the side of the
TV. If your camcorder is
stereo, you must connect
two separate cables.
(The audio cables are
usually included with the
camcorder.)
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the VIDEO
terminal on the side of the
TV. (A video cable is usually
included with the
camcorder.) To watch a
tape, follow your camera’s
instructions and the section
on “Viewing an External
Signal Source” in this
manual.
1
Connect a set of audio
cables between the
Component (1, 2 or 3)
AUDIO IN jacks on the TV
and the AUDIO OUT jacks
on the DVD player.
2
To enable Component video
viewing, connect video
cables between the
Component (1, 2 or 3) Y, PB
and PR jacks on the TV and
Y, PB and PR (or Y, CB, CR)
output jacks on the DVD
player.
Note: For an explanation of
Component video, see your
DVD player's owner's
manual.
Camcorder
Output Jacks
TV Side Panel
Camcorder
TV Rear Panel
Incoming
Cable or
Antenna
DVD Player
Connecting to audio and video jacks
1
Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO OUT jacks on the
DVD player.
2
Connect video cables
between the VIDEO OUT
jack on the DVD player and
the VIDEO IN jack on the
TV.
TV Rear Panel
Incoming
Cable or
Antenna
DVD Player
24
25
Connections
Connecting a DTV Set Top Box
Connecting to Y,PB,PR
1
Connect a set of audio
cables between the
Component (1, 2 or 3)
AUDIO IN jacks on the TV
and the AUDIO OUT jacks
on the Set Top Box.
2
Connect video cables
between the Component (1,
2 or 3) Y, PB and PR inputs
on the TV and Y, PB and PR
(or Y, CB, CR) outputs on the
Set Top Box.
Note: For an explanation of
Component video, see your
Set Top Box owner's
manual.
Connecting to R,G,B
TV Rear Panel
1
Connect a set of audio
cables between the PC/DVI
AUDIO IN jacks on the TV
and the AUDIO OUT jacks
on the Set Top Box.
2
Connect video cables
between the PC IN jack on
the TV and the R.G.B OUT
jack on the Set Top Box.
TV Rear Panel
Incoming
Cable or
Antenna
Incoming
Cable or
Antenna
DTV Set Top Box
DTV Set Top Box
Connecting to DVI (Digital Visual
Interface)
1
Connect a set of audio
cables between the PC/DVI
AUDIO IN jacks on the TV
and the AUDIO OUT jacks
on the Set Top Box.
2
Connect video cables
between the DVI IN jack on
the TV and the DVI OUT
jack on the Set Top Box.
TV Rear Panel
Incoming
Cable or
Antenna
DTV Set Top Box
26
27
SAMSUNG
Operation
Operation
Turning the TV On and Off
Selecting the Menu Language
Press the POWER button on the remote control or on the side panel to turn your TV on and off.
Note that audio on this product can being working before screen video.
Choose a language for the on-screen menus: English, Spanish or French.
1
Viewing the Menus and Displays
The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu
system by pressing the MENU button on the remote control. Once the on-screen menu appears, use
the …/†/œ/√/ENTER on your remote control to select menu items and make adjustments.
You can also view the on-screen menu system and make some adjustments using the TV’s side
panel buttons.
1
Press the … or † button to
select “Language”, then
press the ENTER button.
Input
Picture
Setup
Channel
Move
Enter
3
Exit
Picture
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
Press the … or † button to
select the language, then
press ENTER button.
Press the EXIT button to exit
the menu.
Enter
Return
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
: English
: On
: Off
Enter
√
√
√
√
√
√
√
Return
-----
Signal
Mono
Picture
Sound
Dolby
MTS
Dynamic
Standard
Off
Mono
- - : - - am
Picture
Sound
Channel
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
: English
English
:Español
On
:Français
Off
Enter
Return
Selecting the Antenna Input
You can connect to two different signal sources by choosing the antenna input(A or B).
Press the MENU button. Press the …
or † button to select “Channel”,
then press the ENTER button.
Channel
Input
Picture
Sound
Air 12
Setup
Input
Setup
1
Displaying Status Information
30
Move
: English
: On
: Off
√
√
√
√
√
√
√
Sound
Channel
1
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Setup
Input
Channel
Picture
Use the … or † button to
Input
select to items in the menu.
Picture
Use the œ, √ or ENTER
button to display, change, or
Sound
use the selected items. Use
Channel
the ENTER or √ button to
Setup
enter items in the menu.
On-screen menus disappear
from the screen automatically after
about two minutes, or you can press
the EXIT button on your remote
control to exit the menu.
Press the INFO button on the
remote control. The TV will
display the channel, current
time, and the audio signal
you are listening to.
Sound
Sound
√
√
Source List
Edit Name
Setup
2
Picture
Setup
2
Input
Setup
Input
Channel
Displaying the Menus
With the power on, press the
MENU button on the remote
control. The main menu
appears on the screen.
The Input menu is selected.
Press the MENU button.
Press the … or † button to
select “Setup”, then press the
ENTER button.
2
Press the ENTER button to select
“Antenna”.
Setup
Picture
Press the … or † button to select
“A” or “B”, then press ENTER button.
Press the EXIT button to exit the
menu.
Move
Enter
√
√
√
√
√
√
√
Exit
Channel
Input
3
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Sound
Channel
Setup
Antenna
:A A
Air/CATV
: AirB
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Enter
√
√
√
√
√
√
√
Exit
31
Operation
Channel Memory
Storing Channels in Memory Automatically
Your TV can memorize and store all of the channels available. Once the channels are memorized,
you can use the CH
and CH buttons to scan through the available channels.
1
Selecting the Broadcast Source
First, select the broadcast source as
described on the previous page. With
the Channel menu on screen, press the
… or † button to select “Auto Program”,
then press the ENTER button.
1
2
Channel
Input
Picture
Sound
Channel
Setup
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Enter
Picture
Sound
Channel
Setup
Before memorizing available channels, you must select what broadcast source your TV is
connected to, either an antenna or a cable system.
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
Channel
√
√
√
√
√
√
√
Pres the ENTER button to select “Start”.
The TV will begin memorizing all of the
available stations. Press the ENTER
button at any time to interrupt the
memorization process.
Press the EXIT button to exit the menu.
Move
2
Picture
Sound
Channel
Setup
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Enter
Memorize Channels
Press ENTER Button to Start
Return
Start
Move
Enter
Picture
Sound
Channel
Setup
Channel Memory in Progress...
Air 35
Move
Return
Enter
Enter
Adding and Erasing Channels
Return
1
Press the MENU button. Press the … or
† button to select “Channel”, then press
the ENTER button.
Quick way to access Add/Delete: Just
press the ADD/DEL button on the remote
control.
Channel
Input
Picture
Sound
Channel
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Move
Enter
Return
Return
2
Press the … or † button to select
“Add/Delete”, then press the ENTER
button.
Channel
Input
Picture
Sound
Channel
3
Press the CH / or number buttons to
select the channel you want to add or
delete. Press the ENTER button to add or
delete the channel.
Press the EXIT button to exit the menu.
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
32
Exit
√
√
√
√
√
√
√
Air
Antenna
:A
Air/CATV
: STD
Air
HRC
Auto Program
IRC
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Exit
Return
Channel
Input
Return
Auto Program
Channel
Input
Enter
Auto Program
Stop
Press the … or † button to
select “Air/CATV”, then
press the ENTER button.
If you are connected to an
antenna, leave “Air”
displayed. If you connected
cable, press the … or †
button to select the type of
cable system: “STD”,
“HRC” or “IRC”. (If you are
not sure which type of
cable system you have,
contact your cable
company).
Press the EXIT button to exit
the menu.
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Input
Move
Enter
Return
Add&Del. Channel
Air 12
Not In Memory
Press Enter to Add The Channel
Add
CH Change
Return
Move
Exit
33
Operation
Changing Channels
Selecting Your Favorite Channels
You can change channels on your TV by using the CH
and CH
buttons, or by direct
selection using the number buttons. You can use the number buttons to tune to any channel (even
one that has been erased or has not been memorized).
You can store your favorite channels for each available input source (such as TV and CATV).
Then, when you press the FAV.CH button on the remote control, the TV displays only the favorite
channels you previously stored, allowing you to quickly and easily find frequently watched
channels.
Using the Channel Buttons
To Store Your Favorite Channels:
Press the CH or CH
buttons to change channels.
The TV changes each channel in order, up or down,
depending on which button you press. You will see all
the channels that the TV has memorized. (The TV must
have memorized at least three channels.) You will not
see channels that were not memorized or have been
erased.
1
Using the Number Buttons
Channel
Input
Picture
Sound
Channel
2
3
Press the … or † button to
select “Air/CATV”, then
press the ENTER button.
Press the … or † button to
select the type of cable
system or Air, the press the
ENTER button.
Press the … or † button to
select “Favorite Channel”,
then press the ENTER
button.
Using the Previous Channel
Move
Press the œ or √ button.
Press the … or † button to
select channel, then press
the ENTER button.
Press the EXIT button to exit
the menu.
NOTE
Return
Picture
Sound
Channel
Air
Antenna
:A
Air/CATV
: STD
Air
HRC
Auto Program
IRC
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Move
Enter
Return
Channel
Input
Picture
Sound
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
4
Enter
Channel
Input
Channel
Press the PRE-CH button on the remote control.
The TV changes to the last channel you were watching.
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
To change to single-digit channels (0–9) faster, press
“0” before the single digit.
Example: For channel 4, press “0” ,then “4” .
To select a channel over 100, press the +100 button
first.
Example: For channel 122, press “+100”, then “2”, then “2” .
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
Move
Enter
Return
Favorite Channel
Input
Picture
Sound
Channel
Setup
AIR
2
----
AIR
3
----
AIR
4
----
AIR
5
----
AIR
6
----
AIR
7
----
AIR
8
✔
Return
Select All
Clear All
---▼
Move
Enter
Return
• Only memorized channels can be set as Favorite channels.
To View Your Favorite Channels:
Press the FAV.CH button repeatedly to jump from one favorite
channel to another. The favorite channels are selected in
ascending sequence.
34
35
Operation
Scanning Channels
Labeling the Channels
You can automatically scan all of the channels in memory.
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number, or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
1
Press the MENU button.
Press the … or † button to
select “Channel”, then
press the ENTER button.
Channel
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “Channel Scan”,
then press the ENTER
button.
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Enter
√
√
√
√
√
√
√
Picture
▲ More
Channel Scan
LNA
: Off
Press the CH or CH
button to
tune to the channel that will be
labeled.
2
Press the MENU button.
Press the … or † button to
select “Channel”, then
press the ENTER button.
Return
Channel
Input
1
√
√
Sound
3
The TV will change the
channels automatically, one
by one. Scanning channels
will be displayed in the PIP
window. To stop channel
scan, press the ENTER
button again.
Enter
Move
Enter
√
√
√
√
√
√
√
Return
Return
Channel Scan
Air 3
3
Air 4
Press the … or † button to
select “Channel Label”,
then press the ENTER
button.
Return
Channel
Input
Picture
Sound
Channel
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Return
NOTE
When the ANT-B mode is selected, the channel scan function
works on the main picture only.
5
36
Sound
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Move
4
•
Picture
Channel
Channel
Setup
Channel
Input
Press the œ or √ button to
Input
select label field, then
Picture
press the ENTER button.
(Each label has five fields).
Sound
Press the … or † button to Channel
select a letter, a number or
Setup
a blank. (Pressing the … or
† button results in this
sequence: A~Z, 0~9, blank, -).
Press the √ button to
switch to the next field,
which will be selected.
Select a second letter or
digit pressing … or †
button, as above. Repeat
the process to select the
last two digits. Press the
EXIT button to exit the menu.
Move
Enter
√
√
√
√
√
√
√
Return
Channel Label
▲
AIR 2
A---▼
Clear
AIR 3
-----
Clear
AIR 4
-----
Clear
AIR 5
-----
Clear
AIR 6
-----
Return
Clear
▼
Move
Adjust
Return
Channel Label
Input
Picture
Sound
Channel
Setup
AIR 2
CNN12
Clear
AIR 3
-----
Clear
AIR 4
-----
Clear
AIR 5
-----
Clear
AIR 6
-----
Clear
Return
▼
Move
Adjust
Return
37
Operation
Picture Control
Using Automatic (“Standard”) Picture Settings
1
Using the remote, you can change the contrast, brightness, tint, color, and sharpness settings of
the TV.
Press the P.MODE button on the remote
control to change the picture settings.
Customizing the Picture
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Sound
Channel
Setup
2
3
Press the … or † button to
select “Custom Picture”,
then press the ENTER
button.
You will see the items
“Contrast”, “Brightness”,
“Sharpness”, “Color” or
“Tint”.
Press the … or † button to
select the item you want to
change.
Dynamic
Picture
Input
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Press P.MODE repeatedly to select the
“Dynamic”, “Standard”, “Movie” or
“Custom” picture setting.
Return
Picture
Input
2
Normal
Off
On
On
Enter
Return
Guide to Automatic Picture Settings
• Choose Standard to set the TV to operate at top performance according to your TV’s
specifications.
• Choose Dynamic for viewing the TV during the day or when there is bright light in the room.
• Choose Movie when viewing the movie.
• Choose Custom if you want to adjust the settings yourself.
Custom Picture
Input
Picture
Sound
Contrast
Brightness
Sharpness
Color
Tint
100
50
50
50
50
Channel
Setup
4
Press the œ or √ button to
raise or lower the value of
the item, using the on
screen gauge as your
guide.
Move
Enter
Return
▲
Contrast
▼
100
When you are finished adjusting an item, wait a moment.
The level indicator will disappear and the Video menu will return.
You can continue to make adjustments, or press the EXIT button to
exit.
NOTE
38
• Tint doesn’t operate in PC, DVI or 480p-Component or higher
modes.
39
Operation
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Using the on-screen menus, you can change the TV’s bass, treble, and balance settings.
3
Press the … or † button to select the
item you want to change.
4
Press the œ or √ button to raise or lower
the value of the item, using the on
screen gauge as your guide.
Custom Sound
Input
Picture
Bass
Treble
Balance L/R
50
50
50
Sound
Adjusting the Volume
Press VOL+ to raise the volume or VOL–
to lower the volume.
Channel
Setup
Move
Enter
Return
You can continue to make adjustments, or press the EXIT button to exit.
Using the Mute Button
Press the MUTE button on the
remote control to silence the
volume. The word “Mute” will
appear in the lower left corner
of the screen.
Using Automatic(Standard) Sound Settings
Mute
To turn mute off, press the MUTE
button again, or raise or lower
the volume with the VOL – and
VOL + buttons.
1
Press the S.MODE button on the remote
control to change the automatic sound
setting.
Standard
2
Customizing the Sound
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Press the S.MODE button again to select
the “Standard”, “Music”, “Movie”,
“Speech” or “Custom” sound setting.
Guide to Automatic Sound Settings
Channel
Setup
2
Press the … or † button to
select “Custom Sound”,
then press the ENTER
button.
You will see the items
“Bass”, “Treble” or
“Balance L/R”.
Move
Enter
Return
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
•
•
•
•
•
Choose
Choose
Choose
Choose
Choose
Standard for the “factory” settings (the best choice for most people).
Music when watching music videos or concerts.
Movie when watching a movie.
Speech when watching a show that is mostly dialogue, like a news show.
Custom if you want to adjust the settings yourself.
Channel
Setup
Move
Enter
Return
Continued...
40
41
Operation
Setting the Clock
Setting the Timers
This TV has a built-in clock that will appear on screen when you press the INFO button on the
remote control. Setting this clock also allows you to use it to automatically turn the TV on or off.
This TV can be set to turn on or off automatically at specific times that you choose. Before using
the timers, you must set the TV’s clock, as described previously.
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Input
Picture
Sound
Channel
Setup
2
Press the ENTER button
twice.
Setting the On/Off Timer
Setup
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
√
√
√
√
√
√
√
: English
: On
: Off
Move
Enter
1
Picture
Clock
Sleep Timer
On Timer
Off Timer
√
√
√
√
2
Press the … or † button to
select the correct hour.
Picture
Sound
4
Press the √ button to select
“Min”, then press the … or
† button to select the
correct minute.
Picture
Sound
Picture
Move
Enter
5
Press the √ button to select
“am/pm”, then press the
… or † button to select the
proper time of day (am or
pm). Press the EXIT button
to exit the menu.
Set the current date and time
Hour
Min
am/pm
00
am
▲
10
3
Press the … or † button to select “On
Timer”, then press the ENTER button.
Picture
Sound
10 : 30 am
Off
Off
Off
√
√
√
√
Move
Enter
Return
Clock
Sleep Timer
On Timer
Off Timer
10 : 30 am
Off
Off
Off
√
√
√
√
Sound
Channel
Move
Enter
Setup
Return
Set the current date and time
Hour
Min
10
30
am/pm
▲
4
Input
Picture
Sound
Channel
Enter
Hour
Min
am/pm
10
30
am
▲
▼
Move
Enter
Return
5
Return
Press the √ button to select “Min”, then
press the … or † button to select the
correct minute.
Min
am/pm
0
am
▲
6
▼
CH
03
Setup
Return
Set the current date and time
Enter
Set On Timer
Hour
▼
Move
Move
On Timer
Press the … or † button to select the
correct hour.
am
Channel
Setup
Return
Time
Input
Picture
▼
Clock
Input
Clock
Sleep Timer
On Timer
Off Timer
Setup
Return
Channel
Setup
Enter
Sound
Clock
Input
: English
: On
: Off
Time
Input
Channel
Setup
√
√
√
√
√
√
√
Channel
Clock
Input
Move
Press the ENTER button to select “Time”.
Sound
3
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Setup
Channel
Setup
Picture
Channel
Return
- - : - - am
Off
Off
Off
Setup
Input
Sound
Time
Input
Press the MENU button. Press the … or
† button to select “Setup”, then press the
ENTER button.
Vol Activation
10
Move
No
Enter
Return
On Timer
Input
Picture
Set On Timer
Hour Min
am/pm
▲
6
30
am
▼
Sound
CH
Vol Activation
Channel
03
10
Setup
Move
No
Enter
Return
Continued...
42
43
Operation
Setting the Sleep Timer
6
Press the √ button to select “am/pm”,
then press the … or † button to select
the proper time of day (am or pm).
On Timer
Input
Hour
Picture
Sound
Channel
7
Min
am/pm
30
am
▲
6
▼
CH
Vol Activation
03
10
Setup
Press the √ button to select “CH”, then
press the … or † button to select the
channel you want when the TV turns on.
You can set your TV to automatically turn off after a preset interval.
Set On Timer
Move
No
Enter
Return
Picture
Sound
Set On Timer
Hour Min
6
30
CH
am/pm
30 Min.
am
Vol Activation
▲
06
10
No
▼
Setup
Press the √ button to select “Vol”, then
press the … or † button to select the
volume level you want when the TV turns
on.
Press the SLEEP button on
the remote control.
On Timer
Input
Channel
8
1
Move
Enter
Return
On Timer
Input
Picture
Sound
Set On Timer
Hour
Min
am/pm
6
30
am
CH
2
You’ll see “Off” at the
bottom of the screen. Press
the Sleep button to select
the time interval for the TV
to stay on.
The interval ranges from
30 to 180 minutes.
Vol Activation
▲
Channel
06
10
No
▼
Setup
9
Press the √ button to select “Activation”,
then press the … or † button to select
“Yes”. When On/Off timers are set, the
“Timer” LED will illuminate (front or side
panel of TV.)
Move
Enter
Return
On Timer
Input
Picture
Sound
NOTE
Set On Timer
Hour
Min
am/pm
6
30
am
CH
• If no signal is received for 15 minutes, the TV will be
automatically turned off.
Vol Activation
▲
Channel
6
10
Yes
▼
10
11
When you are finished, press the
MENU button twice.
If you want to set the Off Timer, press
the … or † button to select “Off
Timer”. Set the “Off Timer” just as
you set the “On Timer”. Press the EXIT
button to exit the menu.
Setup
Move
Enter
Return
Time
Input
Picture
Clock
Sleep Timer
On Timer
Off Timer
10 : 30 am
Off
6 : 30 am
Off
√
√
√
√
Sound
Channel
Setup
Move
Enter
Return
Absent Power Off
When you set the timer “On”, your television will eventually be turned off,
if you do not operate any controls during the 3 hours after the TV is turned on
by timer. This function is available in only the timer “On” mode and will
prevent a leakage accident or overheating, caused by your TV left on for a
long time due to the timer “On” (when you are away on holiday, for example).
44
45
Operation
Viewing an External Signal Source
Assigning Names to External Input Mode
Selecting the Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCRs, DVD, Set-Top box and the TV source (broadcast or cable).
1
2
1
Make sure that the remote control is
controlling the TV set. Press the
MODE button and make sure that
the “TV” LED is illuminated.
Press the MENU button.
Press the ENTER button to
select “Input”.
Input
Input
√
√
Source List
Edit Name
Picture
Sound
Channel
Setup
2
Input
Input
Press the MENU button.
Press the ENTER button to
select “Input”.
Press the … or † button to
to select “Edit Name”, then
press the ENTER button.
Enter
Return
Input
Input
√
√
Source List
Edit Name
Picture
Sound
√
√
Source List
Edit Name
Move
Picture
Channel
Sound
Setup
Move
Enter
Return
Channel
Setup
3
Press the ENTER button to
select “Source List”.
Sound
Channel
Setup
4
Enter
Return
Source List
Input
Picture
Press the … or † button to
select a particular signal
source, then press the
ENTER button to activate it.
Press the EXIT button to exit
the menu.
Move
TV
Video1
Video2
Video3
S-Video1
S-Video2
S-Video3
▼ More
:
:
:
:
:
:
-
Move
-
-
-
Enter
√
√
√
√
√
√
√
Return
Source List
Input
Picture
Sound
Channel
Setup
TV
Video1
Video2
Video3
S-Video1
S-Video2
S-Video3
▼ More
Move
:
:
:
:
:
:
-
-
-
-
Enter
√
√
√
√
√
√
√
3
Press the ENTER button to
select “Video1”.
Press the … or † button to
select external device:
VCR, DVD, Cable STB, HD
STB, Satellite STB, AV
Receiver, DVD Receiver,
Game, Camcorder, Combo
or PC.
Edit Name
Input
Picture
Sound
Channel
Setup
Video1
Video2
Video3
S-Video1
S-Video2
S-Video3
Component1
▼ More
Move
:
:
:
:
:
:
:
- - - --- - - - - VCR
- - - DVD
- Cable
- - - STB
- - HD
- - STB
-Satellite
- - - STB
-AV
- -Receiver
▼
Enter
Return
Set other signal sources using the
same method as listed above.
Press the EXIT button to exit the
menu.
Return
When you connect equipment to the TV, you can choose
between the following sets of jacks: Video1, Video2, S-Video1,
S-Video2, Component1, Component2, Component3, DVI or PC
on the TV’s rear panel, and Video3 or S-Video3 on the TV’s side
panel.
46
47
Operation
Remote Control VCR/DVD Buttons
Flip the cover of the remote control up to access buttons that can control the tape functions of a
connected VCR or DVD, including Rewind, Play, Fast Forward, Stop and Pause.
1
Slide the cover of your remote
control unit for access to the tape
function controls. Press the
appropriate buttons to control your
VCR or DVD.
Special Features
48
Special Features
Setting Up Your Remote Control
This TV’s remote control can operate almost any STB(Set-Top Box), VCR, cable box, or DVD.
After it has been set up properly, your remote control can operate in five different modes: TV,
STB(Set-Top Box), VCR, Cable, or DVD. Pressing the corresponding button on the remote control
allows you to switch between these modes, and control whichever piece of equipment you choose.
Note
The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
Setting Up the Remote to Operate Your Cable Box
1
2
Turn off your cable box.
3
4
On your Samsung remote control, press
the SET button.
5
Press the POWER button. Your cable box
should turn on. If your cable box turns
on, your remote control is now “set up”
correctly.
6
Once your remote control is set up, press
the MODE button any time you want to
use the remote to operate your cable
box.
Setting Up the Remote to Operate Your VCR
1
2
Turn off your VCR.
3
4
On your Samsung remote control, press
the SET button.
5
6
Press the MODE button and make sure
that the VCR LED is illuminated.
The remote control has five “modes”:
“TV”, “STB”, “VCR”, “CABLE” and
“DVD”.
Enter 3 digits of the VCR code listed on
the next page for your brand of VCR.
Make sure you enter 3 digits of the code,
even if the first digit is a “0”.
If more than one code listed, try the first
one.
If your VCR does not turn on, repeat
steps 2, 3, and 4, but try one of the
other codes listed for the brand of your
particular VCR.
Press the POWER button on the remote
control. Your VCR should turn on. If your
VCR turns on, your remote control is now
set correctly.
Once your remote control is set up, press
the MODE button any time you want to
use the remote to operate your VCR.
Press the MODE button and make sure
that the CABLE LED is illuminated.
The remote control has five “modes”:
“TV”, “STB”, “VCR”, “CABLE” and
“DVD”.
Enter 3 digits of the cable box code
listed below for your brand of cable box.
Make sure you enter 3 digits of the code,
even if the first digit is a “0”. (If more
than one code listed, try the first one.)
If your cable box does not turn on,
repeat steps 2, 3, and 4, but try one of
the other codes listed for your particular
brand of cable box.
Note on Using Remote Control Modes: Cable Box
• When your remote control is in “Cable Box” mode, the volume buttons still control your TV’s
volume.
Note on Using Remote Control Modes: VCR
• When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
50
51
Special Features
Setting Up the Remote to Operate Your DVD
1
2
3
4
5
6
Turn off your DVD.
Remote Control Codes
VCR Codes
000
Press the MODE button and make sure
that the DVD LED is illuminated.
The remote control has five “modes”:
“TV”, “STB”, “VCR”, “CABLE” and
“DVD”.
On your Samsung remote control, press
the SET button.
Enter 3 digits of the DVD code listed on
the next page for your brand of DVD.
Make sure you enter 3 digits of the
code, even if the first digit is a “0”.
If more than one code listed, try the first
one.
If your DVD does not turn on, repeat
steps 2, 3, and 4, but try one of the
other codes listed for the brand of your
particular DVD.
Press the Power button on the remote
control. Your DVD should turn on.
If your DVD turns on, your remote
control is now set correctly.
Once your remote control is set up,
press the MODE button any time you
want to use the remote to operate your
DVD.
001
002
Samsung
018
003
004
005
Daewoo
Daewoo, LG(Goldstar)
008
009
Broksonic, Emerson
021
Craig, Fisher, Radio Shack,
• When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
JC Penney
061
Candle, Citizen, Portland
Magnavox, Marantz, Philco,
062
Canon, Curtis Mathes,
Philips, Sylvania
039
General Electric, JC Penney,
JC Penney, JCL, Kenwood,
Magnavox, Panasonic, Philco,
Marantz, NEC, Tatung, Teac
Radio Shack, Realistic, Sylvania
063
RCA
Daewoo
Daewoo, Emerson, Samsung,
041
General Electric, Multitech,
064
Shintom
Curtis Mathes, Dimensia,
Scott, Toshiba
Samsung
065
Magnavox, Philco, Sylvania
022
Colortyme, Curtis Mathes, DB,
042
Pioneer
066
Emerson
RCA
LG(Goldstar), Harman Kardon,
043
Emerson
067
Fisher
Bell & Howell, Fisher, JC Penney,
JC Penney, JCL, Kenwood,
044
Hitachi, JC Penney, Pentax, RCA,
069
LG(Goldstar)
JCL, Kenwood, Marantz, NEC,
Marantz, NEC
Sears
070
Marantz, NEC
023
024
Aiwa, Curtis Mathes, Dynatech,
045
Hitachi
071
Emerson
Sanyo, Sears, Tandy
Emerson, Funai, Hitachi, Lloyd,
046
RCA
073
Curtis Mathes, NEC
Hitachi, JC Penney, Pentax,
LXI, MTC, Multitech, Radio Shack,
047
Sony
074
Emerson
Pioneer, RCA, Sears, Toshiba
Realistic, Signature, Sylvania,
048
Sharp
076
Curtis Mathes, Emerson, TMK
Admiral, Optimus, Radio Shack,
Symphonic, Tandy, Teac, Teknika
050
Emerson, Scott
077
Emerson, Scott
Audio Dynamics, DB, JC Penney,
051
Emerson, Samsung
078
RCA, Teac
Candle, Citizen, Craig,
JCL, Kenwood, Marantz, NEC,
052
Fisher, Radio Shack/Realistic,
079
Emerson
Curtis Mathes, General Electric,
Pioneer, Sansui
Sears
082
KLH
025
Go Video, JC Penney, MTC,
026
Akai, Shintom, Sony
053
Portland, Quasar
084
Panasonic
Multitech, RCA, Samsung,
027
Fisher, Sears
054
Candle, Citizen, Daewoo,
085
Daewoo
Totevision
028
Fisher, Radio Shack, Realistic,
Portland, Sharp
086
Panasonic
Candle, Citizen, Curtis Mathes,
088
Admiral
Sears, Toshiba
Canon, Curtis Mathes,
055
Emerson, General Electric,
029
Emerson
LG(Goldstar), JCL, Kenwood,
Instant Replay, JC Penney,
030
Teknika
Marantz, NEC, Pentex Research+
JCL, Magnavox, Marantz,
031
Akai, Samsung
056
Emerson
Panasonic, Philco, Philips,
032
Akai, Emerson
057
Fisher, Sears, Toshiba
Quasar, Radio Shack, Realistic,
035
Shintom, Sony
058
Emerson, Scott, Toshiba
020
Eastern International, Hamlin,
RCA, Sylvania, Technics, Teknika
Cable Box Codes
000
Samsung
038
GI, Jerrold
057
001
Nawoo
Regal
039
Unika
058
002
TaePyungYang
021
Hamlin, Regal
040
Magnavox, Philips, Unika,
059
003
DeaRyung
022
Zenith
Viewstar
060
004
DongKuk
023
GI, Jerrold
Magnavox, Philips, Regency,
063
Tocom
005
DaeHan
024
Oak, Osk Sigma
Viewstar
065
Zenith
006
LG(Goldstar)
025
Tocom
042
Hamlin
066
Stargate 2000
007
Saewoo
026
Pioneer
044
GI, Jerrold
067
Sylvania, Texscan
008
RCA
027
Magnavox, Philips, Viewstar
045
Hitachi, Macom
069
Panasonic, Zenith
010
Regency
028
Pioneer
046
Oak
070
Jerrold
011
Hamlin, Panasonic, Regal,
029
Magnavox, Philips, Tocom,
047
Panasonic
071
Viewstar
048
Magnavox, Philips, Viewstar
072
Samsung
049
Magnavox, Philips, Unika,
073
Jerrold
Viewstar
074
RCA
050
Zenith
075
051
Hitachi, Macom
076
077
Samsung
Note on Using Remote Control Modes: DVD
Pioneer
060
RCA
Logik, Multitech, Shintom
Realistic, Sharp
017
038
059
Radio Shack, Realistic, Sharp
040
Quartz, Radio Shack, Realistic,
016
Totevision
Electrohome, Emerson,
Audio Dynamics, Candle, Citizen,
General Electric, PROSCAN,
015
037
Realistic, Sanyo, Sears
007
014
036
Realistic, Sears, Toshiko, Teknika,
019
006
011
Candle, Citizen, Emerson,
LG(Goldstar), Radio Shack,
LG(Goldstar)
012
GI, Hamlin, Jerrold
030
013
GI, Jerrold
031
015
Anvision, Cable Star, Eagle,
032
016
Magnavox, Philips, Randtek,
033
GI, Jerrold
041
Viewstar
034
Magnavox, Philips, Viewstar
052
Pioneer, Samsung, Warner Amex
017
NSC
035
RCA, Panasonic, Sprucer
054
General Instrument, Hitachi,
019
Sylvania, Texscan
036
037
Magnavox, Philips, Viewstar
Tocom
Universal
Samsung
GI
Jerrold, Signature, Starcom
056
Hamlin
DVD Codes
52
000
Samsung
003
JVC
006
Panasonic
001
LG(Goldstar)
004
Sony
007
Philips
002
Toshiba
005
Sharp
008
PROSCAN, RCA
009
Curtis Mathes
53
Special Features
Fine Tuning Channels
LNA (Low Noise Amplifier)
Fine tuning lets you manually adjust the TV’s tuner if you have difficulty tuning in a channel.
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the
reception (a low-noise preamplifier boosts the incoming signal).
1
2
Using the number buttons on the
remote control, select the channel
you want to fine tune.
Press the MENU button.
Press the … or † button to
select “Channel”, then
press the ENTER button.
1
Press the MENU button.
Press the … or † button to
select “Channel”, then
press the ENTER button.
Input
Sound
Channel
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Move
Picture
Sound
Channel
Channel
Picture
Channel
Input
Enter
Setup
2
Press the … or † button to
select “LNA”, then press the
ENTER button.
Return
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Move
Enter
√
√
√
√
√
√
√
Return
Channel
Input
Picture
▲ More
Channel Scan
LNA
: Off
√
√
Enter
Return
Sound
Channel
3
Press the … or † button to
select “Fine Tune”, then
press the ENTER button.
Setup
Channel
Input
Picture
Sound
Channel
√
√
√
√
√
√
√
Antenna
:A
Air/CATV
: Air
Auto Program
Favorite Channel
Channel Label
Fine Tune
Add/Delete
▼ More
Setup
Move
Enter
Return
3
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to exit
the menu.
Channel
Input
Picture
4
▲ More
Channel Scan
LNA
: OffOff
On
Sound
Channel
Setup
Press the œ or √ button to
adjust the fine tuning.
Move
Move
Enter
Return
Fine Tune
Air 12 * is Fine Tuned
3
To store the fine tuning
setting in the TV’s memory,
press the ENTER button.
(A * icon will appear.)
Reset
NOTE
Return
Move
• This function works in ANT-A mode only (not available in
ANT-B mode).
Enter
Fine Tune
To reset the fine tuning to
“0”, press the ENTER
button once more.
Press the EXIT button to exit
the menu.
54
Air 12
0
Reset
Move
Return
Enter
55
Special Features
Selecting the Color Tone
DNIeTM (Digital Natural Image engine)
Samsung’s New Technology enables an improved image with detail, contrast and white
enhancement and 3D noise reduction.
1
2
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Press the … or † button to
select “Color Tone”, then
press the ENTER button.
Press the … or † button to
select “Cool2”, “Cool1”,
“Normal”, “Warm1” or
“Warm2”, then press the
ENTER button. Press the
EXIT button to exit the
menu.
3
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
2
Press the … or † button to
select “Film Mode”, then
press the ENTER button.
3
Sound
Channel
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
2
: Dynamic
:
:
:
:
Cool2
Normal
OffCool1
Normal
On
Warm1
On
Press the … or † button to
select “DNIe”, then press
the ENTER button.
Input
Picture
Sound
Setup
Enter
Return
3
Press the … or † button to
select “Off”, “Demo” or
“On”, then press the
ENTER button.
Press the EXIT button to exit
the menu.
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Return
Picture
Channel
Warm2
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Return
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
On
Off
Demo
Enter
Return
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Return
Guide to DNIe Settings
• On: Switches on the DNIe mode.
• Demo: The screen before applying DNIe appears on the right
and the screen after applying DNIe appears on the left.
DNIe DEMO
DNIe ON
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button
to exit the menu.
Picture
Setup
On: Automatically senses and processes film signals from all
sources and adjusts the picture for optimum quality.
Off: Switches off the Film mode.
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Input
Return
Setting the Film Mode
1
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button
DNIe OFF
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
OffOff
OnOn
On
• Off: Switches off the DNIe mode.
Enter
Return
NOTE
• Film mode is supported in 480i only.
56
57
Special Features
Digital Noise Reduction
Setting the Blue Screen Mode
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
If no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue
Screen” mode to “Off”.
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Setup
Input
Picture
Sound
Channel
Press the … or † button to
select “Digital NR”, then
press the ENTER button.
Picture
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
2
Press the … or † button to
select “Blue Screen”, then
press the ENTER button.
Return
Picture
Sound
Channel
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
: English
: On
: Off
√
√
√
√
√
√
√
Return
Move
Enter
Return
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
Off
On
On
Enter
3
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to
exit the menu.
Setup
Input
Picture
Sound
Channel
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
: English
: On
: Off
On
On
Return
Setup
58
Enter
Setup
Input
Setup
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
Press the EXIT button to exit
the menu.
Move
Picture
Input
Sound
3
: English
: On
: Off
√
√
√
√
√
√
√
Return
Setup
2
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
Enter
Return
59
Special Features
Changing the Screen Size
Special Audio Options
When you press the P.SIZE button on the remote control, the TV’s screen mode choices appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, 4:3.
The name of the screen mode will be displayed at the bottom of the TV screen.
MTS Settings: Choosing a Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono, or a
Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP
has unrelated information like news or weather.)
Wide
Sets the picture to 16:9 wide mode.
1
Wide
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Channel
Panorama
Setup
Move
Enter
Return
Use this mode for the wide aspect
ratio of a panoramic picture.
2
Panorama
Press the … or † button to
select “MTS”, then press
the ENTER button.
Sound
Input
Picture
Sound
Zoom1
Magnifies the size of the picture on
screen. You can also move the picture
on screen using the scroll function.
Press the … or † button to scroll the
picture.
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Channel
Setup
Zoom 1
3
▲
Position
▼
Zoom2
Magnifies the size of the picture more
than Zoom1. You can also move the
picture on screen using the scroll
function. Press the … or † button to
scroll the picture.
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Zoom 2
Press the … or † button to
select “Mono”, “Stereo” or
“SAP”, then press the
ENTER button.
Press the EXIT button to
exit the menu.
Move
Enter
Return
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Off
Off
Mono
Mono
Stereo
Off
SAP
Channel
Setup
: Standard
:
:
:
:
Move
Enter
Return
▲
Position
▼
4:3
Sets the picture to 4:3 normal mode.
This is a standard TV screen size.
Guide to MTS Settings
4:3
NOTES
• You can select only Wide, 4:3 screen size in the Component(480p, 720p, 1080i) Mode.
• With PIP On, the screen automatically becomes wide in the Antenna, Video (1~3), S-Video
(1~3) or Component (480i) mode. With PIP Off, it returns to original screen size.
60
• Choose Stereo for channels that are broadcasting in stereo.
• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty
receiving a stereo signal.
• Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language
translation.
61
Special Features
Virtual Dolby
BBE
This feature allows the TV’s L/R speakers to provide a home Theater-like Dolby effect.
The center and surround sounds are mixed into the L/R speakers.
BBE is a built-in effect that adds clarity, punch and dynamics to the sound.
Quick way to access Virtual Dolby: Just press the SURROUND
button on the remote control.
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
1
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
2
Press the … or † button to
select “Virtual Dolby”, then
press the ENTER button.
Move
Enter
Input
Picture
Sound
Setup
: Standard
:
:
:
:
2
Off
Off
Mono
Off
√
√
√
√
√
√
Press the … or † button to
select “BBE”, then press the
ENTER button.
3
Press the … or † button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to
exit the menu.
Enter
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Picture
Setup
3
: Standard
: Off
Off
: On
Off
: Mono
: Off
Enter
Move
Enter
Return
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Move
Enter
Return
Return
Press the … or † button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to
exit the menu.
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Off
On
Mono
Off
Channel
Setup
Channel
Move
√
√
√
√
√
√
Sound
Input
Sound
Sound
Setup
62
Move
Off
Off
Mono
Off
Channel
Channel
Setup
Sound
: Standard
:
:
:
:
Return
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Picture
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Channel
Channel
Setup
Sound
Input
Move
Enter
Return
Return
NOTE
NOTE
• Virtual Dolby and BBE can't be set ON at the same time.
• Virtual Dolby and BBE can't be set ON at the same time.
63
Special Features
Setting The On/Off Melody
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust
the volume every time the channel is changed. “Auto Volume” automatically adjusts the
volume of the desired channel by lowering the sound output when the modulation signal
is high or by raising the sound output when the modulation signal is low.
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press
the ENTER button.
A melody sound can be set to come on when the TV is powered On or Off.
1
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Off
Off
Mono
Off
√
√
√
√
√
√
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Setup
Input
Picture
Sound
Channel
Setup
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
: English
: On
: Off
Enter
√
√
√
√
√
√
√
Return
Channel
Setup
2
Press the … or † button to
select “Auto Volume”, then
press the ENTER button.
Move
Enter
Return
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
: Standard
:
:
:
:
Setup
Press the … or † button to
select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to
exit the menu.
Off
Off
Mono
Off
√
√
√
√
√
√
Enter
Return
Sound
Input
Picture
Sound
Sound Mode
Custom Sound
Virtual Dolby
BBE
MTS
Auto Volume
Channel
Setup
64
Move
Setup
Input
Picture
Sound
Channel
3
2
Press the … or † button to
select “Melody”, then press
the ENTER button.
: Standard
Channel
Setup
3
Press the … or † button to
select “On”, then press the
ENTER button.
Press the EXIT button to exit
the menu.
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
: English
: On
: Off
Enter
√
√
√
√
√
√
√
Return
Setup
Input
Picture
Sound
Channel
Setup
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
: English
: On
Off
On
: On
Enter
Return
: Off
: Off
: Mono
: Off
Off
On
Move
Enter
Return
65
Special Features
Viewing Closed Caption Information
Viewing Picture-in-Picture
Your TV decodes and displays the closed captions information that is broadcast along with some
television shows. These captions are usually subtitles for the hearing impaired or translations into
other languages. All VCRs record the closed caption signal from television programs, so prerecorded video tapes can also deliver closed-caption information. Check for the closed caption
symbol (
) on the tape’s package or your TV program-schedule.
One of the most best features of your TV is the Picture-in-Picture (PIP) feature. The advanced PIP
system allows you to watch two different pictures at once, even if you don’t have a VCR
connected to your TV.
Selecting a PIP Screen
Closed Captions
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Press the … or † button to
select “Closed Caption”,
then press the ENTER button
2
Press the ENTER button to
select “Closed Caption”.
Press the … or † button to
select “On”, then press the
ENTER button.
Quick way to access PIP: Just press the PIP button on the remote
control.
Setup
Input
Picture
Sound
Channel
Setup
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Input
Picture
Sound
Return
Channel
Closed Caption
Input
Closed Caption
Caption Mode
Setup
: Off
Off
On
: CC1
Sound
Setup
2
Move
Enter
Press the … or † button to
select “PIP”, then press the
ENTER button twice.
Picture
Return
Closed Caption
Input
Closed Caption
Caption Mode
Channel
Enter
√
√
√
√
√
√
√
√
Return
√
√
: On
: CC1
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
Sound
Setup
4
Normal
Off
On
On
Picture
3
Channel
Press the … or † button to
select caption mode you
want, then press the ENTER
button.
Press the EXIT button to exit
the menu.
:
:
:
:
Picture
Input
Sound
3
Move
: Dynamic
Picture
Channel
Press the … or † button to
select “Caption Mode”,
then press the ENTER
button.
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
Enter
Return
Closed Caption
Input
Closed Caption
Caption Mode
Picture
Sound
Channel
Setup
Move
CC1
: On
CC2
: CC1
CC3
CC4
Text1
Text2
Text3
Text4
Enter
Press the … or † button to
select “On”, then press the
ENTER button. The PIP
image will appear in the
corner of the screen.
Press the EXIT button to exit
the menu.
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
:Off
On
:On
TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
Return
Return
Guide to Caption Mode
• CC1~CC4: In caption mode, caption appears at the bottom of the screen, and they usually
cover only a small portion of the picture.
• Text1~Text4: In text mode, information unrelated to the program, such as news or weather, is
displayed. Text often covers a large portion of the screen.
NOTE
66
• The Caption function doesn’t operate when the PIP is active.
NOTES
• Picture-in-Picture doesn’t function when the V-chip or Caption is active.
• If you turn the TV off while watching and turn it on again, then the mode will return to normal
video.
• Screen size can’t be changed when the PIP is active in the TV, Video or Component(480i)
mode.
67
Special Features
Selecting an External Signal
Selecting a Signal Source (Antenna or Cable) for PIP
You can use PIP to view a signal from an external source, such as a VCR.
If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture
separately from the main picture. (If the main picture is ANT-B and the broadcasting sources are
different, making adjustments is necessary.)
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Picture
Channel
Setup
Press the … or † button to
select “PIP Source”, then
press the ENTER button.
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
:
:
:
:
Normal
Off
On
On
Enter
Input
Picture
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
Picture
Sound
Setup
√
√
√
√
√
√
√
√
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Return
: On
: TV
√
√
: Large
√
√
√
√
√
Picture
Sound
Return
Press the … or † button to
select “Air/CATV”, then
press the ENTER button.
Picture
Channel
Setup
4
Video1
Video2
: Large
Video3
:S-Video1
Air 11
:S-Video2
Air
S-Video3
: Main
Return
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
PIP
Input
Sound
: On
: TVTV
Enter
Setup
3
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Picture
Input
Channel
PIP
Input
Picture
Input
Channel
PIP
Sound
4
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Return
: Dynamic
: Air 11
The signal from these
Channel
: Air
inputs will not appear if
: Main
Setup
you have not connected
Move
Enter
any equipment to the TV’s
input jacks.
For more information about external signals, see
“Viewing an External Signal Source” (See page 46).
If you select “TV” the PIP image is the same as the
main image.
Press the … or † button to
select an external signal
then press the ENTER
button.
You can choose between
“TV”, “Video1~3” or
“S-Video1~3”.
Press the EXIT button to
exit the menu.
√
√
√
√
√
√
√
√
Picture
Input
Sound
3
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
If an antenna is connected,
Input
the setting is “Air”.
Picture
If a Cable TV system is
providing the signal, press
Sound
the … or † button until the Channel
appropriate type of cable
Setup
system is displayed (“STD”,
“HRC” or “IRC).
Press the EXIT button to exit the
menu.
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
Return
PIP
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
: Large
Air
:STD
Air 11
:HRC
Air
: IRC
Main
Enter
Return
NOTE
• The PIP subscreen doesn’t support ANT-B, Component1, Component2, Component3, PC, and
DVI.
68
69
Special Features
Swapping the Contents of the PIP and Main image
Changing the Size of the PIP image
Quick way to access PIP size: Just press the SIZE button on the
remote control.
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Picture
Channel
Setup
Press the … or † button to
select “PIP Swap”, then
press the ENTER button.
The PIP image will appear
in the main image, and
vice versa.
Press the EXIT button to exit
the menu.
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
√
√
√
√
√
√
√
√
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
2
Sound
Press the … or † button to
select “PIP”, then press the
ENTER button.
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
Picture
Input
Picture
Sound
Channel
Setup
Return
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
3
Press the … or † button to
select “PIP Size”, then
press the ENTER button.
• When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function doesn’t work.
Picture
Channel
Return
NOTE
PIP
Input
Sound
Setup
4
70
Picture
Setup
√
√
√
√
√
√
√
√
Normal
Off
On
On
Enter
Picture
Input
Return
: Dynamic
:
:
:
:
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Channel
Picture
Input
Sound
3
1
Picture
Press the … or † button to
select “Small”, “Large”,
“Double1” or “Double2”,
then press the ENTER
button.
Press the EXIT button to exit
the menu.
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
Return
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
Small
: Large
Large
Double1
:Double2
Air 11
: Air
: Main
Enter
Return
NOTE
• Double function doesn’t operate in the PC and DVI mode.
71
Special Features
Changing the Location of the PIP Image
Changing the Picture-in-Picture Channel
After you set the PIP signal source (antenna or cable), it is easy to change channels.
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button
Quick way to access PIP channel: Just press the CH
CH
button on the remote control.
Picture
Input
Picture
Sound
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Return
Picture
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Input
Picture
Channel
Setup
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Input
Picture
Channel
Setup
Picture
Sound
Return
Channel
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
3
Press the … or † button to
select “PIP Channel”, then
press the ENTER button.
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Return
PIP
Input
Picture
Sound
Return
Channel
Setup
4
:
:
:
:
PIP
Sound
Press the … or † button to
select PIP position you
want, then press the ENTER
button.
Press the EXIT button to
exit the menu.
Move
: Dynamic
Picture
Input
Setup
3
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Picture
Sound
Press the … or † button to
select “PIP Position”, then
press the ENTER button.
and
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
√
√
: Large
√
√
√
√
√
: Air 11
: Air
: Main
Enter
Return
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
4
: Large
: Air 11
: Air
: Main
Enter
Return
Press the … or † button to
select PIP position you
want, then press the
ENTER button. Press the
EXIT button to exit the
menu.
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
: Large
▲
: Air 11
Air 11
: Air
▼
: Main
Enter
Return
NOTE
• The PIP channels are not available when RF is set to ANT-B.
(The PIP channels link to ANT-A).
72
73
Special Features
Using the V-Chip
Selecting the Sound Source
You can use this feature to hear sound from the Main or PIP screen.
1
Press the MENU button.
Press the … or † button to
select “Picture”, then press
the ENTER button.
Picture
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “PIP”, then press the
ENTER button.
Input
Picture
Sound
Setup
3
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
: Dynamic
:
:
:
:
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
How to Change Your Password
1
Return
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Picture
Channel
Press the … or † button to
select “Select Sound”, then
press the ENTER button.
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is
defined by the user).The on-screen menu will instruct you to assign a password (and you can
change it later, if necessary).
Note: The V-Chip doesn’t function when the PIP is active.
Picture Mode
Custom Picture
Color Tone
Film Mode
DNIe
Digital NR
Size
PIP
Move
Normal
Off
On
On
Enter
√
√
√
√
√
√
√
√
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
2
Move
3
√
√
: Large
√
√
√
√
√
Enter
Press the … or † button to
select “V-Chip”, then press
the ENTER button.
Return
: On
: TV
: Air 11
: Air
: Main
Sound
Setup
PIP
Input
Picture
Channel
: Dynamic
:
:
:
:
Setup
Input
4
Return
Press the … or † button to
select “Change PIN”, then
press the ENTER button.
Press the …/† or √ button
to enter your current 4-digit
PIN number.
Note: The default PIN
number for a new TV set is
“0000.”
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
4
5
PIP
Input
Picture
Sound
Channel
Setup
PIP
PIP Source
PIP Swap
PIP Size
PIP Position
PIP Channel
Air/CATV
Select Sound
Move
: On
: TV
: Large
: Air 11
: AirMain
Sub
: Main
Enter
Press the ENTER button to
select “Enter New PIN”,
then press the …/† or √
button to enter your new 4digit PIN number.
6
7
NOTE
Press the ENTER button to
select “Confirm New PIN”,
then press the …/† or √
button to confirm your new
4-digit PIN number.
Press the MENU button to
exit the menu.
• If you forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to 0-0-0-0:
POWER OFF → Mute → 8 → 2 → 4 → POWER ON.
74
Enter
Return
Input
Enter PIN
Picture
Sound
√
Change PIN
Channel
Setup
Move
Enter
Return
V-Chip
Input
Picture
Enter Current PIN
*
Enter New PIN
Sound
Confirm New PIN
Channel
0 9
Enter PIN
Enter
Return
V-Chip
Input
Enter Current PIN
Picture
*
*
*
Enter New PIN
Sound
Return
: English
: On
: Off
V-Chip
Setup
Press the … or † button to
select “Main” or “Sub”,
then press the ENTER
button.
Main is for the main TV
picture audio, and sub is
for the PIP picture audio.
Press the EXIT button to
exit the menu.
√
√
√
√
√
√
√
*
*
Confirm New PIN
Channel
Setup
0 9
Enter PIN
Enter
Return
V-Chip
Input
Enter Current PIN
Picture
*
*
*
Enter New PIN
*
*
*
*
Confirm New PIN
*
Sound
Channel
Setup
*
0 9
Enter PIN
Enter
Return
75
Special Features
How to Enable/Disable the Rating Controls
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
How to Set up Restrictions Using the “TV Parental Guidelines”
Setup
Input
Picture
Sound
Channel
Setup
2
Press the … or † button to
select “V-Chip”, then press
the ENTER button.
Input
Picture
Channel
Setup
3
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
Input
Sound
Setup
2
Press the … or † button to
select “V-Chip”, then press
the ENTER button.
Picture
Setup
√
Change PIN
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
Setup
Input
Channel
*
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
Sound
Enter PIN
Enter
Return
3
V-Chip
Input
Picture
V-Chip Lock
: Off
TV Parental Guidelines
Movie Ratings
Press the ENTER button.
Press the number button to
enter your current 4-digit
PIN number.
√
√
√
V-Chip
Input
Enter PIN
*
Picture
√
Change PIN
Sound
Channel
Setup
0 9
Enter PIN
Enter
Return
Sound
Setup
Move
Enter
Return
V-Chip
Input
Picture
V-Chip Lock
: On
Off
On
TV Parental Guidelines
Movie Ratings
4
Press the … or † button to
select “TV Parental
Guidelines”, then press the
ENTER button.
V-Chip
Input
Picture
V-Chip Lock
: On
TV Parental Guidelines
Movie Ratings
√
√
√
Sound
Channel
Setup
Move
Enter
Return
Sound
Channel
Setup
76
Picture
Sound
Channel
5
Setup
Input
Channel
Enter PIN
0 9
Press the … or † button to
select “On”, then press the
ENTER button.
Press the EXIT button to
exit the menu.
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Picture
Setup
4
1
V-Chip
Channel
To enable the V-Chip
feature, Press the ENTER
button to select “V-Chip
Lock”.
Parental restrictions can be set up using either of two methods: The TV Parental Guidelines or
Movie Ratings.
Setup
Sound
Press the ENTER button.
Press the number button to
enter your current 4-digit
PIN number.
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
Enter
Return
77
Special Features
How to Set up Restrictions using the Movie Ratings: G, PG, PG-13, R, NC-17, X
5
You can independently lock the TV ratings. The locked TV
(FCC) ratings are indicated by the symbol ( ). Press the
…/†/œ/√ buttons and the ENTER button to activate the
appropriate restrictions for TV (FCC) rating system.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Young children
Children 7 and over
General audience
Parent Guidance
Viewers 14 and over
Mature Audience.
TV Parental Guidelines
Input
Picture
Sound
Channel
Setup
ALL FV
V
S
L
TV-Y
TV-Y7
D
Return
Allow All
Block All
TV-G
TV-PG
TV-14
TV-MA
Move
Enter
Return
The Movie rating system uses the Motion Picture Association of America (MPAA) system, and its
main application is for movies.
When the Rating Controls is on, the TV will automatically block any programs that are coded with
objectionable ratings (either Movie Ratings or TV Parental Guidelines).
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Setup
Input
Picture
Sound
Channel
Press the EXIT button to exit the menu.
NOTE
Setup
2
Press the … or † button to
select “V-Chip”, then press
the ENTER button.
• These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age
7), and TV-G through TV-MA (everybody else). The restrictions for these two groups work
independently: If a household includes very young children as well as young adults, the TV
guidelines must be set up separately for each age group. (See next step.)
Input
Picture
Channel
Setup
Press the ENTER button.
Press the number button to
enter current PIN your 4digit PIN number.
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
Setup
Sound
3
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
V-Chip
Input
Enter PIN
*
Picture
√
Change PIN
Sound
Channel
Setup
0 9
4
Press the … or † button to
select “Movie Ratings”,
then press the ENTER
button.
Enter PIN
Enter
Return
V-Chip
Input
Picture
√
√
√
V-Chip Lock
: On
TV Parental Guidelines
Movie Ratings
Sound
Channel
Setup
5
78
Move
Enter
Return
Movie Ratings
You can independently lock
Input
Block
the Movie ratings.
G
PG
Picture
The locked Movie ratings
PG-13
R
are indicated by the
Sound
NC-17
X
symbol ( ).
Channel
NR
Press the …/†/œ/√
Setup
Move
buttons and the ENTER
button to activate the
appropriate restrictions for Movie rating system.
Press the EXIT button to exit the menu.
Return
Allow All
Block All
Enter
Return
79
Special Features
Important Notes About Parental Locks
Explanation of the MPAA and TV (FCC) Rating Systems:
TV (FCC) Age-Based Ratings
TV-MA
Mature audiences only. This program may
contain mature themes, profane language,
graphic violence and explicit sexual content.
TV-G
General audience. It contains little or no
violence, no strong language, and little or no
sexual dialogue or situations.
TV-14
Parents strongly cautioned. This program may
contain sophisticated themes, sexual content,
strong language and more intense violence.
TV-Y7
Directed to older children. Themes and
elements in this program may include mild
physical or comedic violence, or may frighten
children under the age of seven.
TV-PG
Parental guidance suggested. The program
may contain infrequent coarse language,
limited violence, some suggestive sexual
dialogue and situations.
TV-Y
All children. The themes and elements in this
program are specifically designed for a very
young audience, including children from ages
two – six.
TV (FCC) Content Category
MPAA Rating System (Movies)
V
S
L
D
FV
G
PG
Violence.
Sexual content.
Offensive language.
Dialogue sexual innuendo.
Fantasy or cartoon violence.
PG-13
R
NC-17
X
General audience. No restriction.
Children under 13 should be
accompanied by an adult.
Parental guidance suggested.
Children under 13 should be
accompanied by an adult.
Restricted. Viewers should be 17
or older.
Not classified. Viewers should be
17 or older.
Adults only.
• TV (FCC) ratings: The particular rating that you have selected will be locked (and indicated as a
red “L” on a blue background). Also, all of the age-based ratings will be locked within the
particular group (i.e., “group 1” or “group 2”).
Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case,
more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are
automatically locked as well.
• MPAA ratings: The particular rating that you have selected will be locked.
In addition, more restrictive ratings will be locked as well.
• Neither TV (FCC) ratings nor MPAA ratings apply to news programs.
80
PC Display
PC Display
Using Your TV as a Computer (PC) Display
How to Set up Your PC Software (Windows only)
How to connect Your PC to the TV
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV
may be different, depending on the model.
The Windows display-settings for a typical computer are shown below. The actual screens on your
PC will probably be different, depending upon your particular version of Windows and your
particular video card. However, even if your actual screens look different, the same basic setup
information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
First, click on “Settings” on the Windows
start menu.
While “Settings” is highlighted, move the
cursor so that “control panel” is
highlighted.
When the control panel screen appears,
click on “Display” and a display dialogbox will appear.
15Pin(D-Sub)
Cable
Audio Cable
Navigate to the “Settings” tab on the
display dialog-box.
NOTE
The RS232 jack is for repairs and software upgrades.
The two key variables that apply to the
TV-PC interface are “resolution” and
“colors”. The correct settings for these two
variables are:
* Screen area (sometimes called
“resolution”): 1024 x 768 pixels
* Color: “24-bit” color (might also be
expressed as “16 million colors”).
Shown at left is a typical screen for
“Display” dialog box.
If a vertical-frequency option exists on your
display settings dialog box, the correct
value is “60” or “60 Hz”. Otherwise, just
click “OK” and exit the dialog box.
continued...
82
83
PC Display
Display Modes
Horizontal Frequency [KHz] Vertical Frequency [Hz] Pixel Clock [MHz] Sync Polarity (H/V)
+/25.175
70.00
31.47
-/28.322
70.00
31.47
35.5
85.00
37.93
-/+
-/+
25.175
60.00
31.47
640 x 480
-/30.24
66.70
35.00
-/31.50
72.80
37.86
-/31.50
75.00
37.50
-/36.00
85.00
43.27
-+/36.00
56.30
35.16
SVGA
800 x 600
+/+40.00
60.30
37.88
+/+
50.00
72.20
48.08
+/+
49.50
75.00
46.87
+/+
56.25
85.10
53.67
-/+
57.284
74.60
832 x 624
49.73
-/65.00
60.00
48.36
XGA
1024 x 768
-/75.00
70.10
56.40
+/78.75
60.02
75.00
X
74.25
60
33.75
DTV 1920 x 1080i
X
74.25
60
45.00
1280 x 720p
X
27
60
31.47
720 x 483p
Mode
VGA
Resolution
640 x 350
720 x 400
NOTE
• Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table above shows all of the display modes that are supported:
* The interlace mode is not supported.
* The TV will operate abnormally if a non-standard video format is selected.
NOTES
• When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
• Your PC display screen might appear different, depending on the manufacturer (and depending
on your particular version of Windows). Check your PC instruction book for information about
connecting your PC to a TV display-monitor.
• Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync
signal is supported.
84
How to Set up Your TV as a PC display
“Auto Adjust” allows the TV to self-adjust to the incoming video signal.
The values of fine, coarse and position are adjusted automatically.
1
Press the TV/VIDEO button to select
“PC”.
2
Press the … or † button to select
“Setup”, then press the ENTER
button.
Setup
Input
Picture
Sound
Channel
Setup
3
Press the … or † button to select
“PC Setup”, then press the ENTER
button.
Picture
Channel
Setup
4
: English
: On
: Off
Enter
Return
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
PC Setup
Input
Picture
Sound
Press the EXIT button to exit the
menu.
Move
√
√
√
√
√
√
√
Setup
Input
Sound
Press the … or † button to select
“Auto Adjustment”, then press the
ENTER button.
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
√
√
√
√
√
Coarse
Fine
Position
Auto Adjustment
Recall
Channel
Setup
Move
Enter
Return
Auto in Progress
Please Wait
85
PC Display
Picture Quality Adjustment
Fine tuning
6
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost
and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
Press the … or † button to select “Fine”,
then press the ENTER button.
PC Setup
Input
Picture
Sound
Channel
Setup
Frequency Adjustment
1
2
Setup
Input
Picture
Sound
Channel
Setup
3
Press the … or † button to
select “PC Setup”, then
press the ENTER button.
Input
Picture
Sound
Setup
Press the ENTER button to
select “Coarse”, then press
the ENTER button.
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Remove picture noise (vertical stripes) on
the screen by pressing the œ or √ button.
(If phase is not set properly, the picture
may be blurry).
Press the EXIT button to exit the menu.
Move
Enter
Return
▲
Fine
▼
115
Return
Setup
Channel
4
7
Press the TV/VIDEO button to select
“PC”.
Press the … or † button to
select “Setup”, then press
the ENTER button.
√
√
√
√
√
Coarse
Fine
Position
Auto Adjustment
Recall
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Move
√
√
√
√
√
√
√
: English
: On
: Off
Enter
Return
PC Setup
Input
Picture
Sound
√
√
√
√
√
Coarse
Fine
Position
Auto Adjustment
Recall
Channel
Setup
5
86
Remove picture noise
(vertical stripes) on the
screen by pressing the œ
or √ button. (If frequency
is not set properly, then
vertical stripes will appear
on the screen).
Move
Enter
Return
▲
Coarse
▼
1344
87
PC Display
Changing the Position of the Image (Moving left, right, up and down)
After connecting the TV to your PC, adjust the position of screen if it is not well-aligned.
To Initialize the Screen Position and Picture Quality Adjustment
After steps 1~3 above are completed, press the † button to select “Recall”.
Press the ENTER button to initialize the screen position and picture quality.
1
2
Press the TV/VIDEO button to select
“PC”.
Press the … or † button to
select “Setup”, then press
the ENTER button.
Setup
Input
Picture
Sound
Channel
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Setup
3
Press the … or † button to
select “PC Setup”, then
press the ENTER button.
Input
Picture
Channel
Move
Enter
Time
V-Chip
Closed Caption
Language
Melody
Blue Screen
PC Setup
Setup
Press the … or † button to
select “Position”, then press
the ENTER button.
: English
: On
: Off
Return
Setup
Sound
4
√
√
√
√
√
√
√
√
√
√
√
√
√
√
: English
: On
: Off
Move
Enter
Return
PC Setup
Input
Picture
Sound
√
√
√
√
√
Coarse
Fine
Position
Auto Adjustment
Recall
Channel
Setup
Return
Input
▲
Picture
▼
Adjust the position of
screen by pressing the
…/†/œ/√ button.
Press the EXIT button to exit
the menu.
Enter
Position
▼
5
Move
Sound
Channel
Setup
▼
Move
Enter
Return
NOTE
• If a PC signal is input to DVI, you can’t adjust the quality and position of picture.
88
89
PC Display
Changing the Screen Size (PC mode)
Aspect Supported settings
When you press the P.SIZE button on the remote control, the TV’s screen mode choices appear in
sequence. The screen displays in this order: Wide TV, Wide PC, Expand, 4:3.
The name of the screen mode will be displayed at the bottom of the TV screen.
Wide TV
Scales the picture to the size of the TV
screen regardless of the aspect ratio
of the input source.
Source (PC/DVI)
1920 x 1080i
Aspect
Wide TV ➝ 4:3
1280 x 720
Wide TV ➝ Wide PC ➝ Expand ➝ 4:3
1024 x 768
Wide TV ➝ Wide PC ➝ Expand
720 x 483 (480p)
Others
Wide TV ➝ 4:3
Wide TV ➝ Wide PC ➝ Expand ➝ 4:3
Wide TV
NOTES
• In VGA (640x480) and SVGA (800x600) modes, the Wide and 4:3 screen modes are available.
• In XGA (1024x768) mode, the Wide screen mode is available.
Wide PC
Scales the picture to 92% of the
screen regardless of the aspect ratio
of the input source.
Wide PC
Expand
Scales the picture to the aspect ratio
of the input source.
Expand
4:3
Displays the picture as it is without
changing the aspect ratio of input
source.
4:3
NOTE
• The Wide PC and Expand screen modes are recommended for the PC mode.
90
91
SAMSUNG
Appendix
Appendix
Troubleshooting
Care and Maintenance
Before you call a service technician, please scan this list of problems and possible solutions.
It may save you time and money.
With proper care, your TV will give you many years of service. Please follow these guidelines to
get the maximum performance from your TV.
Problem
Possible Solution
Poor picture quality.
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality or no sound.
Try another channel.
Adjust the antenna.
Make sure the “Mute” button is off.
No picture or sound.
Try another channel.
Press the TV/Video button.
Make sure the TV is plugged in.
Check the antenna connections.
No color or wrong colors.
Make sure the program is broadcasted in color.
Adjust the picture settings.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
Placement
•
•
•
•
Do not put the TV near extremely hot, cold, humid or dusty places.
Do not put the TV near appliances that create magnetic fields.
Keep the ventilation openings clear.
Place the TV on a flat and level surface.
(Raising one of it’s corners may cause the picture to tilt.)
Liquids
• Do not handle liquids near or on the TV.
Cabinet
•
•
•
•
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
Do not put heavy objects on top of the cabinet.
This DLP Projection TV projects the image onto a large screen by applying an optical system.
If you place the TV set face down, it might cause a problem because dirt, or some other
contaminant may become attached to the inside of the TV set.
Temperature
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord for at least
two hours so that moisture that may have formed inside the unit can dry completely.
Erratic operation, or
intermittent failure.
Unplug the TV for 30 seconds, then try again.
Remote control failure.
Press the MODE button to put your remote control
into “TV” mode.
Make sure the remote has batteries.
If you plan to take your TV to a foreign country, please be aware of the different television systems
that are in use around the world. A TV designed for one system may not work properly with
another system due to differences in the TV channel frequencies.
TV won’t switch on.
Make sure the wall outlet is working.
Make sure the remote has batteries.
Specifications
Using the TV in Another Country
• The display panel used for the DLP Projection TV is composed of many tiny pixels.
These, pixels may occasionally appear on the screen.
Model
Voltage
Frequency of Operation
Power Consumption
Dimension
(W x D x H)
Weight
94
HLN4365W1/HLN437W1 HLN5065W1/HLN507W1
HLN617W1
HLN467W1
HLN567W1
AC 120V
AC 120V
AC 120V
AC 120V
AC 120V
60Hz
60Hz
60Hz
60Hz
60Hz
200 watts
200 watts
200 watts
200 watts
200 watts
1029 x 399 x 755 mm
1184 x 444 x 859 mm
1436 x 489 x 1021mm
1047 x 399 x 779 mm
1268 x 461 x 924mm
40.5 x 15.7 x 29.7 inches 46.6 x 17.5 x 33.8 inches 56.5 x 19.3 x 40.2 inches 41.2 x 15.7 x 30.6inches 49.9 x 18.1 x 36.4 inches
30.5 Kg / 67.2 lbs
35.2 Kg / 77.6 lbs
46.2 Kg / 101.9 lbs
33.5 Kg / 73.8 lbs
41.5 Kg / 91.5lbs
95
Download PDF

advertising