Samsung | SGH-C414R | Samsung SGH-C414M User Manual

SGH-C414M
P O R T A B L E
Q u a d - B A N D
M O B I L E
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
©2015 Samsung Electronics Canada, Inc.
SAMSUNG is a registered trademark of Samsung Electronics Co.,
Ltd. and its related entities.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers relating
to the SAMSUNG Phone, including but not limited to, accessories,
parts, or software relating there to (the “Phone System”), is proprietary
to Samsung and protected under federal laws, state laws, and
international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and related
documentation and other works of authorship. You may not infringe or
otherwise violate the rights secured by the Intellectual Property.
Moreover, you agree that you will not (and will not attempt to) modify,
prepare derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code from the
software. No title to or ownership in the Intellectual Property is
transferred to you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
T9 Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
ACCESS® and NetFront™ are trademarks or registered trademarks of
ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and
combination mark (Bluetooth word mark and “B Design”) are
registered trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card
Association.
Some software components of this product incorporate source code
covered under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), OpenSSL License, BSD License and
other open source licenses. To obtain the source code covered under
the open source licenses, please visit: http://
opensource.samsung.com.
The actual available capacity of the internal memory is less than the
specified capacity because the operating system and default
applications occupy part of the memory. The available capacity may
change when you upgrade the device.
The privacy and copyright laws of Canada govern the disclosure,
reproduction and distribution of data, media and other content,
including music and video content. Certain activities, including
downloads or transfer by any means (including, via cable, Bluetooth®
or otherwise) of such content may be an infringement of privacy or
copyright law. Neither Samsung Electronics Canada Inc. nor any of its
affiliates shall be liable or responsible for any data or content
disclosed, reproduced, downloaded or distributed by the user of this
equipment.
Dynamic Noise Suppression from Audience™
Your phone is equipped with an advanced voice processing chip that
delivers clear mobile calls by suppressing background noise,
intermittent sounds (like a siren or nearby conversation), and
echoes, allowing you to hear and be heard nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the
technology:
• Captures, evaluates and distinguishes all the sound signals surrounding
your phone, and the person you're speaking with.
• Then isolates the primary voice in conversation and filters out the
background noise - so the person you're calling hears only your voice,
without disturbing background noise.
• Dynamically equalizes and adjusts voice volume to optimize your calling
experience, so you can hear clearly and don't need to speak louder to
overcome surrounding noise.
The noise suppression technology is built-in and already enabled in
your new mobile phone. So it's ready to provide unsurpassed voice
clarity with every call.
Disclaimer of Warranties; Exclusion of
Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE
PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND
SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF
THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF
THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT
WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION
OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN
THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE
AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE OR USE OF THE
PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..........................................................1
Setting Up Your Phone ........................................................................... 1
Charging a Battery .................................................................................. 5
Switching the Phone On or Off ............................................................... 7
Setting Up Your Voice Mail ..................................................................... 7
Section 2: Understanding Your Phone .....................................9
Features of Your Phone .......................................................................... 9
Closed Views of Your Phone .................................................................. 9
Open View of Your Phone .................................................................... 11
Display Layout ...................................................................................... 13
Menu Navigation ................................................................................... 16
Multitask Functions ............................................................................... 18
Section 3: Entering Text ...........................................................19
Using the Text Input Methods ............................................................... 19
Using the T9 Predictive Text Input Method ........................................... 21
Using the Alphabetic Input Method ....................................................... 23
Using the Symbols Input Method .......................................................... 24
Using the 123 Numeric Input Method ................................................... 24
Section 4: Call Functions .........................................................25
Displaying Your Phone Number ........................................................... 25
Making a Call ........................................................................................ 25
Making a Call Using Speed Dial ........................................................... 27
Making a Call from Contacts ................................................................. 27
Answering a Call ................................................................................... 28
Options During a Call ............................................................................ 28
Recent Calls ......................................................................................... 32
Call Time ............................................................................................... 35
i
Data Counter ........................................................................................ 36
Section 5: Messaging ...............................................................38
Types of Messages .............................................................................. 38
Creating and Sending Messages ......................................................... 39
Viewing New Received Messages ....................................................... 41
Using Message Options ....................................................................... 41
Outbox .................................................................................................. 42
Drafts .................................................................................................... 42
Voicemail .............................................................................................. 42
Deleting Messages ............................................................................... 43
Messaging Settings .............................................................................. 43
Templates ............................................................................................. 47
Delete by Folder ................................................................................... 48
Used Space .......................................................................................... 48
Section 6: Calendar ..................................................................49
Section 7: Browser ...................................................................52
Home .................................................................................................... 52
Enter URL ............................................................................................. 54
Bookmarks ........................................................................................... 55
Saved pages ........................................................................................ 56
History .................................................................................................. 56
Browser Settings .................................................................................. 56
Section 8: Camera ....................................................................58
Using the Camera ................................................................................ 58
Camera Options ................................................................................... 59
Using the Camcorder ........................................................................... 64
Camcorder Options .............................................................................. 65
ii
Section 9: Photos ......................................................................68
Section 10: Videos ....................................................................71
Record Video ........................................................................................ 72
Section 11: Tools ......................................................................73
Camera ................................................................................................. 73
Music Player ......................................................................................... 73
Using Playlists ...................................................................................... 77
Voice Recognition ................................................................................. 78
Record Audio ........................................................................................ 81
Alarms ................................................................................................... 82
Calendar ............................................................................................... 84
Tasks .................................................................................................... 84
Memo .................................................................................................... 86
Calculator .............................................................................................. 86
Tip Calculator ........................................................................................ 87
Converter .............................................................................................. 87
World Clock .......................................................................................... 88
Timer ..................................................................................................... 90
Stopwatch ............................................................................................. 90
Section 12: My Downloads .......................................................91
Photos ................................................................................................... 91
Music .................................................................................................... 91
Images .................................................................................................. 92
Sounds .................................................................................................. 94
Videos ................................................................................................... 98
Games and Apps .................................................................................. 98
Other Files ........................................................................................... 99
Section 13: Contacts ..............................................................102
Contact Settings ................................................................................. 102
iii
Adding a New Contact ........................................................................ 103
Using Contacts ................................................................................... 106
Contacts Entry Options ...................................................................... 107
Finding My Own Phone Number ........................................................ 108
FDN Mode .......................................................................................... 108
Group Settings ................................................................................... 109
Adding Speed Dial Entries ................................................................. 111
Using the Service Dialing Numbers .................................................... 111
Managing Contact Entries .................................................................. 112
Section 14: Changing Your Settings .....................................115
Sound Profile ...................................................................................... 115
Display ................................................................................................ 119
Time and Date .................................................................................... 121
Phone Settings ................................................................................... 123
T-Coil Mode ........................................................................................ 129
Call Settings ....................................................................................... 130
Connectivity ........................................................................................ 131
Network Selection .............................................................................. 136
Configuring Your Phone’s USB Settings ............................................ 136
Network Profile Configuration ............................................................. 137
Applications Settings .......................................................................... 139
Memory Management ........................................................................ 142
Section 15: Health and Safety Information ...........................144
Safety Warnings ................................................................................. 144
Safety Precautions ............................................................................. 146
Warranty Disclaimer: Proper use of a touch screen handset ............. 148
UL Certified Travel Adapter ................................................................ 149
Important usage information ............................................................... 149
Radio frequency safety ....................................................................... 152
iv
Section 16: Warranty Information .........................................155
Standard Limited Warranty ................................................................. 155
Index ..........................................................................................161
v
vi
Section 1: Getting Started
This section explains how to start using your phone by first configuring
your hardware, activating your service, and then setting up your voice
mail.
Setting Up Your Phone
Prior to use it is necessary to install both the battery and SIM into their
corresponding internal compartments.
1.
Remove the battery cover by sliding the battery cover in the
direction of the arrow (1).
2.
Lift the cover up and off the phone (2).
1
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details, such as your
PIN, available optional services, and many others features.
Important!: The plug-in SIM card information and its contacts can be easily
damaged by scratching or bending, so be careful when handling,
inserting, or removing the card. Keep all SIM cards out of reach of
small children.
•
Carefully slide the SIM card under the metal bracket and into the
SIM card socket until the card locks into place.
• Make sure the card’s gold contacts face into the phone and that the
upper-left angled corner of the card is positioned as shown.
Note: If the card is not inserted correctly, the phone does not detect the SIM card.
Re-orient the card back into the slot.
2
Installing the Battery
1.
Insert the battery into the opening on the back of the phone,
making sure the connectors align (1).
2.
Gently press down to secure the battery (2).
3.
Replace the battery cover on the back of the phone (1) and slide
it into place until you hear it securely click (2).
3
Note: Make sure the battery is properly installed before switching on the phone.
Installing a Memory Card
Your phone also supports the use of a memory card (microSD) for data
storage of such things as data, music, pictures, and video files. This
type of memory card is designed for use with this mobile phone and
other devices.
1.
Push the microSD card into the slot until it clicks (as shown).
Make sure the microSD’s gold contact pins face downward and
the card is securely inserted.
Note: Your device has been tested to support up to a 16GB memory card.
4
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. The Travel
Adapter that is used to charge the battery is included with your phone.
Use only Samsung-approved batteries and chargers.
Note: Long backlight settings, searching for service, vibrate mode, browser use,
and other variables may reduce the battery’s talk and standby times.
You can use the phone while the battery is charging, but it will require
additional charging time.
Note: You must fully charge the battery before using your phone for the first time. A
discharged battery recharges fully in approximately 4 hours.
Using the Travel Adapter
1.
With the battery installed, temporarily open the plastic cover (upper
right side of phone).
Important!: Verify that the handset battery is installed prior to connection. If the
battery is not properly installed and the wall charger is connected, the
handset may power off and on continuously, preventing proper
operation.
Note: The wall charger’s connector attaches to the phone at a slight angle.
5
2.
Plug the small connector of the Travel Adapter into the Power/
Accessory Interface connector as shown and the other end into
a standard AC wall outlet.
3.
When charging is finished, remove the connector- from the
interface connector jack on the phone.
Note: Failure to unplug the wall charger before you remove the battery, can cause
damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain,
) blinks and the device sounds a warning tone
the battery icon (
at regular intervals. In this condition, your phone conserves its
remaining battery power by reducing the backlight’s brightness and
entering a dimming mode. For a quick check of your battery level,
glance at the battery charge indicator located in the upper-right corner
of your device’s display. Five bars (
) indicate a full charge.
When the battery level becomes too low, the phone automatically turns
off.
6
Switching the Phone On or Off
1.
Press and hold
until the phone switches on.
The phone launches the activation splash screen and then
proceeds to search for the network. Once the network has been
found, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to “Changing
Your Settings” on page 115.
2.
Press and hold
until the phone switches off.
Setting Up Your Voice Mail
1.
In Idle mode, press and hold
.
You may be prompted to enter a password.
2.
Follow the tutorial to create a password, record a greeting, and
record your name.
Note: These steps may be different depending on your network.
7
Accessing Your Voice Mail
1.
In Idle mode, press and hold
2.
When connected, follow the voice prompts from the voice mail
center.
.
Accessing Your Voice Mail From Another Phone
8
1.
Dial your wireless phone number.
2.
When you hear your voicemail greeting, press
3.
Enter your passcode using the keypad.
.
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also displays
the screen and the icons that display when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many useful features,
including:
• User friendly, menu driven access to features and options
• Ready access to the Internet
• Built-in Bluetooth technology
• microSD card compatibility for use in data storage and access
Closed Views of Your Phone
6
5
1
4
2
1.
3
Volume keys: allows you to adjust the ringer volume while in
standby mode or adjust the voice volume during a call. When
9
receiving an incoming call, briefly press either volume key to
mute the ring tone. Press and hold either volume key to reject a
call and send it directly to voicemail.
2.
Memory card port: Your phone has an external memory port for a
microSD or microSDHC card.
3.
Front Display: Notifies you of an incoming call or message. It
also displays date, time, network type, signal strength, and
battery power icons, and any icons associated with alerts or
alarms.
10
4.
Camera key: in Idle mode, press to launch the camera. In
camera mode, press to take a picture.
5.
Headset/power adapter/data cable jack: allows you to plug in the
travel adapter (power), PC connection cable (data transfer), and
optional headset.
6.
Camera lens: is used to take pictures and shoot videos.
Open View of Your Phone
1
2
15
3
14
13
4
5
6
12
11
10
7
8
9
1.
Earpiece: allows you to hear the caller.
2.
Display: shows the information needed to operate your phone,
such as the received signal strength, phone battery level, time, etc.
3.
Left Soft key: allows you to select actions or menu items
corresponding to the bottom left line on the display screen.
11
4.
Multitasking key: opens the application switch window, which
allows you to select different applications without having to exit
from the currently active application. These options include Call,
Messaging, Browser, Music Player, Games and Apps, and End all.
5.
Talk/Send key: allows you to power on the phone, make or
answer a call, and access Recent Calls. Press and hold to redial
the last phone number.
6.
Voicemail key: allows you to press and hold to automatically dial
your voicemail.
7.
Alphanumeric keypad: Use these keys to enter numbers, letters
and some special characters. Press and hold
to enter an
International call prefix.
8.
Microphone: allows the other callers to hear you when you are
speaking to them.
9.
Silent Profile key: press and hold in Idle mode to toggle between
Silent sound profile and Normal sound profile.
10. Back key: allows you to return to the previous menu. This key
also allows you to return to the previous page within the Web
browser. In Idle mode, press this key to display the Calendar in
Month view.
11. Power/End key: ends a call. Press and hold to turn the phone
on or off. While in a menu, pressing this key returns the phone to
Idle mode.
12. Music Player key: launches the music player.
13. Right Soft key: allows you to select actions or menu items
corresponding to the bottom right line on the display screen.
12
14. OK/Menu key: when navigating through a menu accepts the
highlighted choice in the menu. Press once in Idle mode to open the
menu.
15. Navigation keys: these keys allow you to scroll through phone
menu options and provide shortcuts to phone functions from
standby mode.
• Up: displays the Create message screen.
• Down: displays Contacts.
• Left: displays the My Downloads menu.
• Right: displays the Inbox.
Display Layout
Your display screen provides a wealth of information about the phone’s
status and options.The main areas of the display are:
Indicators
Date
Main Display
Soft Key
Indicators
13
Indicator Icons
This list identifies the symbols you’ll see on your phone’s display and
Indicator area:
Displays your current signal strength. The greater the
number of bars, the stronger the signal.
Indicates that the Airplane Mode is active. You cannot send
or receive calls or access online information.
Displays when you are out of your service area.
Displays when a call is in progress.
Displays your battery’s charge level. The more bars you
see, the more power you have remaining.
Displays when your connection to an EDGE network is
active.
Displays when your phone is communicating with the
EDGE network.
Displays when your connection to a 3G network is active.
Displays when your phone is communicating with the 3G
network.
14
Displays when an internal microSD memory card is
detected.
Displays when the phone is connected to a computer via
USB cable connection.
Displays within the Indicators area when a new text
message is received.
Displays within the Indicators area when a new Multimedia
message is received.
Displays within the Indicators area when a new voice mail
is received.
Displays within the Indicators area when a new WAP
message is received.
Displays when Inbox is full - Text Message.
Displays when you set an alarm to ring at a specified time. For
more information, refer to “Alarms” on page 82.
Displays when Call forwarding is set to Forward always. For
more information, refer to “Call Settings” on page 130.
Displays when the Sound profile is set to Normal.
Displays when the Sound profile is set to Silent or the
volume has been manually lowered below level 1.
15
Displays when the Sound profile is set to Driving.
Displays when the Sound profile is set to Outdoor.
Displays when Bluetooth is activated.
Displays when a Bluetooth stereo headset has been paired
with the phone.
For more details on configuring your phone’s settings, see “Changing
Your Settings” on page 115.
Menu Navigation
Menus and sub-menus can be accessed by scrolling through them
using the Navigation keys or by using the shortcut keys.
16
Accessing a Menu Function by Scrolling
1.
In Idle mode, press the
key and scroll using the Navigation
keys to reach a main menu item, Settings for example. Press
the Select soft key or the
key to enter the menu.
2.
If the menu contains sub-menus, Phone for example, you can
access them by first highlighting the option and then by pressing
the Select soft key or the
key. If the menu you selected
contains further options, repeat this step.
3.
To scroll through these menus, press the Up or Down
Navigation key. Press the Volume keys (located on the left side
of your phone) to move to the top or bottom of a list. Press the
Select soft key or the
key to make your selection.
4.
To return to the previous menu level, press the Back soft key or
the
key.
5.
To exit the menu without changing the settings, press the
key.
Using Shortcut Numbers
Numbered menu items, such as menus, sub-menus, and options can
be quickly accessed by using their shortcut numbers. In Menu mode,
Main Menus can be accessed by pressing the number keys (1 to 0, *
and #) corresponding to their location on the screen.
For example, to access the Outbox:
1.
In Idle mode, press the
2.
Press the
3.
Press the
key.
key for Messaging.
key for Outbox.
Your message outbox is displayed.
17
Multitask Functions
Pressing the Multitasking key allows you to choose one of the following
functions:
• Call: allows you to make a voice call while using the handset for other tasks.
If Music Player is active, it is muted during the call.
• Messaging: allows you to send a text or multimedia message while using the
handset for other tasks.
• Browser: allows you to launch the web browser while using the handset for
other tasks.
• Music Player: allows you to launch the music player while using the handset
for other tasks
• Games and Apps: allows you to quickly access games and apps while using
the handset for other tasks.
• End all?: closes all running applications or tasks and returns you to the Idle
screen.
18
Section 3: Entering Text
This section outlines how to select the desired text input mode when
entering characters into your phone. It also describes how to use the
T9 predictive text entry system to reduce the number of key strokes
associated with entering text.
Using the Text Input Methods
The Input Method option switches the key entry functions from ABC
(Alphabetic), T9 Alphabetic (predictive text mode), 123 (Numeric
Mode), and Symbols Mode.
ABC (Alphabetic) Input Method (abc, Abc, and ABC)
This input method allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice, three, or
four times until the desired letter displays.
The abc method makes all characters of the word lowercase. The Abc
method makes the initial character an uppercase while the remaining
characters are left as lowercase. The ABC method makes all
characters of the word uppercase.
19
T9 Predictive Text Input Method (T9 ab, T9 Ab, and T9 AB)
This input method allows you to enter words with only one keystroke
per letter. Each key on the keypad has more than one letter; for
example, pressing the
key can enter J, K, or L. However, the T9
method automatically compares the series of keystrokes you make
with an internal linguistic dictionary to determine the most likely word,
thus requiring far fewer keystrokes than the traditional Alphabetic
mode. The T9 ab method makes all characters lowercase. The T9 Ab
method makes the initial character an uppercase while the remaining
characters are left as lowercase. The T9 AB method makes all
characters uppercase.
Numeric
This mode allows you to enter numbers.
Symbols
This mode allows you to enter symbols, such as punctuation marks.
Changing the Text Input Mode
When you are in a field that holds characters (such as in a text
message), the text input mode indicator displays. Use the following
steps to change the text input mode:
1.
To change the text input mode, press the
key.
– or –
If you prefer the T9 Input Method, press the Options soft key
and select Text Mode. Choose your preferred text input mode.
20
2.
After you have selected an input method, keep pressing the
key to choose from the following options:
If in Multitap mode: Quick press the
key to toggle abc (all
lowercase), Abc (initial capitalization), ABC (all uppercase), and
123 (numeric).
If in T9 Predictive Text mode: Quick press the
key to
toggle T9 ab (completed words are all lowercase), T9 Ab
(completed words are initial uppercase),T9 AB (completed
words are all uppercase), and 123 (numeric).
If in Numeric mode: Quick press the
key to toggle from
123 back to your message in the original text entry mode.
If in Symbols mode: Press the OK soft key to return to your
message in the original text entry mode.
Note: Press and hold the
key to access Symbols mode. Press the number
key corresponding to the symbol you want to enter. Use the Up and Down
Navigation keys to scroll through the available symbols. Press OK to enter
the symbol or Cancel to exit.
Using the T9 Predictive Text Input Method
T9 Predictive Text input method is based on a built-in dictionary. A
series of keystrokes is interpreted by the phone using this dictionary to
determine the likely word.
21
Enter a Word in T9 Mode
1.
In T9 method, begin entering a word by pressing the 2 to 9 keys.
Press each key only once for each letter. The built-in dictionary
lists words that match the entered keystrokes.
2.
Example: To enter “Hello”, press
,
,
,
,
The word that you are typing displays on the screen. The word
changes as you press additional keys.
3.
Enter the whole word before editing or deleting the keystrokes.
4.
When the word displays correctly, go to step 5.
If the word doesn’t display correctly, press the
key to
display alternative word choices.
Example: Both “Of” and “Me” use the
and
most commonly used choice first.
5.
Insert a space by pressing the
next word.
keys. The phone displays the
key and start entering the
Add a New Word into the T9 Dictionary
22
1.
After pressing the keys corresponding to the word you want to
add, press the
key to display the alternative words.
2.
When the last alternative word displays, Spell displays. Press
the Spell soft key.
3.
Enter the word you want to add using the ABC mode.
4.
Press the Add soft key or the
key.
The word is added to the T9 dictionary and becomes the first
word for the associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, colons, or parenthesis, press and hold the
key.
T9 mode applies grammar rules to ensure that correct punctuation is used.
• To shift case in T9 mode, short press the
key to toggle between Initial
capital, Capital lock, Lower case, and Numeric.
• You can move the cursor using the Left and Right Navigation keys. To delete
letters, press the
key. Press and hold the
key to clear the
display.
Using the Alphabetic Input Method
To use the ABC Alphabetic input method use the
to enter your text.
1.
2.
to
keys
Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter, and so on
Select the other letters in the same way.
23
Note: The cursor moves to the right when you press a different key. When entering
the same letter twice or a different letter on the same key, just wait for a few
seconds for the cursor to move to the right automatically, and then select the
next letter.
Using the Symbols Input Method
The Symbol input method enables you to insert symbols and
punctuation marks into text.
1.
To enter symbol mode press and hold the
2.
Use the Navigation keys to select an on screen symbol group.
key.
3.
To select a symbol from that group, press the corresponding
number key.
4.
To clear the symbol(s), press the
key. When the input field
is empty, this key returns the display to the previous mode.
5.
To return to your message, press the OK soft key or the
key.
Using the 123 Numeric Input Method
The Numeric mode enables you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
24
Section 4: Call Functions
This section describes how to make or answer a call. It also includes
the features and functionality associated with making or answering a
call.
For more information, refer to “Call Settings” on page 130.
Displaying Your Phone Number
•
Press
 Settings  Phone  Own Number.
Making a Call
•
From the Idle screen, with the phone open, use the keypad to
enter the number you wish to call and press
.
Note: When you activate the Auto Redial option in the Voice Call menu (

Settings  Calls  Voice Call  Auto Redial) the phone automatically
redials up to 10 times when the person does not answer the call or is already
on the phone.
Making an International Call
1. From the Idle screen, press and hold
displays.
. The + character
2. Use the keypad to enter the country code, area code, and phone
number.
3. Press
.
Manual Pause Dialing
To manually call a number with pause(s) without storing it in your
Contacts list:
25
1. From the Idle screen, use the keypad to enter the phone
number.
2. Press and hold
to add a two-second pause (P), and use
the keypad to enter the additional numbers.
Tip: You can create pauses longer than two seconds by entering multiple twosecond pauses.
3. Press
.
For more information, refer to “Adding Pauses to Contact Numbers” on
page 106.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when dialing.
1. After entering a number using the keypad:
• If you make a mistake, press
to erase a single character.
• Press and hold
to erase the entire string of numbers.
2. Press
to return to the Idle screen.
Ending a Call
•
Press the
key.
Dialing a Recent Number
All incoming, outgoing and missed calls are recorded in the Recent
Calls menu. If the number or caller is listed in Contacts, the associated
name also displayed.
1. From the Idle screen, briefly press
26
2. Press the Down Navigation key to highlight a recent call in the
All calls list.
– or –
Press the Left or Right Navigation key to display All calls, Missed
calls, Calls Made, or Calls Received, then press the Down
Navigation key to highlight the call.
3. Press
to dial the number.
Making a Call Using Speed Dial
You can assign a shortcut number to a phone number for speed
dialing.
1. From the idle screen, press Contacts  Speed Dial List or
 Contacts  Speed Dial List.
Note: The Speed Dial screen displays showing the numbers 1 through 9. The
number 1 is reserved for Voice Mail.
2. Highlight an unused number and press Options  Assign.
3. Select Address Book or FDN Contacts.
4. Highlight a contact to assign to the number and press Select or
the
key.
5. To make a call using the Speed Dial feature from the Idle
screen, press and hold the speed dial number. The phone
number assigned will automatically be called.
Making a Call from Contacts
You can store phone numbers that you use regularly on the SIM card
or in the phone’s memory.
27
For further details about the Contacts feature, see “Finding a Contact
Entry” on page 107.
Answering a Call
When a call is received, the phone rings and displays the caller’s
phone number, or name if stored in Contacts.
1. From the Incoming call screen, press
or Accept.
• If the Any Key option is activated (
 Settings  Calls 
General  Call Answer), you can press any key to answer a call
except
or the volume key.
2. Press
to end the call.
Note: You can answer a call while using Contacts or other menu features. After
ending the call, the phone returns to the previously active function screen.
Options During a Call
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone to increase or decrease the
volume level.
In Idle mode, you can also adjust the ringer volume using these same
keys.
Tip: Press one of the volume keys to immediately silence the tone of an incoming
call or alarm.
28
Putting a Call on Hold
You can place the current call on hold whenever you want. You can
also make another call while you have a call in progress if your
network supports this service.
To put a call on hold:
1. While on a call, press Options  Hold.
2. Press Resume to continue the conversation.
To end a call on hold:
•
Press Options  End call to disconnect.
To make a new call while you have a call in progress:
1. While on a call, press Options  Hold.
2. Dial the new phone number or look it up in Contacts.
3. Press
to dial the second number.
– or –
Press Options  New call to dial the second number.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and placing
the other on hold.
To switch between two calls:
•
Press Options  Swap.
To end a specific call:
•
Press
to end the current call.
– or –
29
Press Options  End and then select Active call, Held call, or All
calls and press
.
In-Call Options
1. During a call, press the Mute soft key to mute the microphone.
Press Spkr on to put the call on speakerphone.
Press the Options soft key to access the following:
• Hold: places the current call on hold.
• Contacts: allows you to access your contact information.
• Save to Contacts: allows you to save the current number to Contacts.
This option only appears if the number is not currently in Contacts.
• New call: places the current call on hold and then allows you to enter
and call another number.
• Send Message: allows you to create and send a new Text or
Multimedia Message.
• More:
– Calendar: Allows you to temporarily access your calendar while still
maintaining the active call.
– Memo: Allows you to access Notes.
– Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected. These DTMF tones are sent as a group. The
DTMF tones are the tones used in phones for tone dialling, sounding when
you press the number keys. This option is helpful for entering a password or
an account number when you call an automated system, like a banking
service.
• <Service provider> Menu: Lets you choose a Roam/Intl setting.
• End call: Allows you to end the active call.
30
2. If you are engaged in a call, you can place the active call on hold
by selecting the New call option and either dialing another
number or answering another incoming call. Once the second
call is activated, the following options are available:
• Swap: Places the active call on hold and then re-activates the call on
hold.
• Join: Joins two calls (both active and on hold) into a multi-party call.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1. Dial the number and press
2. Press
.
to activate the speakerphone.
3. Press the Volume keys (located on the left side of your phone) to
adjust the volume.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the
other person cannot hear you.
Example: You wish to say something to person in the room, but do not want the
person on the phone to hear you.
Note: If you have a call on hold, you need to select Mute/Unmute.
To switch the microphone off temporarily during a call:
1. Press Mute. The option is then replaced with Unmute.
31
2. Press Unmute to deactivate the Mute function and reactivate
the microphone.
Searching for a Number in Contacts
1. During the active call, press Options  Contacts.
2. Highlight a contact entry.
For further details about the Contacts feature, see “Finding a Contact
Entry” on page 107.
Recent Calls
The phone stores the numbers of the calls you’ve dialed, received, or
missed in the Recent Calls menu. To access this menu:
1. From the Idle Screen, briefly press
2. Press the down navigation key to highlight a recent call in the All
calls list.
– or –
Press the left or right navigation key to display All calls, Missed
calls, Calls Made, or Calls Received.
3. Press
to dial the number.
If the number or caller is listed in Contacts, the associated name
displays.
Note: You can also view the recent calls lists by selecting
selecting a list type.
 Recent Calls and
Viewing All Calls
1. From the Idle Screen, briefly press
32
(or select

Recent Calls  All calls). The All Calls list displays all calls
made, missed, or received.
2. Highlight a call and press the Options soft key to view the
following options:
• Details: allows you to view the caller’s name, phone number, time and
date called as well as the length of the call.
• Call: allows you to automatically dial the selected number.
• Save to Contacts: allows you to save the number to your Contacts on
either the phone or SIM card. This option only displays if the number is
not already in Contacts.
• Send Message: allows you to send a message to the caller.
• Delete: allows you to delete a selected call or all calls.
• Add to Reject List: allows you to add the selected number to the
Reject List.
Viewing Missed Calls
The number of calls missed displays on the Idle screen.
1. From the Idle Screen, briefly press
and use the right
navigation key to scroll to the Missed calls screen (or select
 Recent Calls  Missed calls). The most recently missed calls
display. If there is only one missed call, pressing
dials the
number.
33
2. Scroll through the list of missed calls. As the call highlights, the
details display.
3. To move to another call type, press the left or right navigation key
to make your selection.
Saving a Missed Call to Contacts
1. From the Idle Screen, briefly press
and use the Right
navigation key to scroll to the Missed calls screen.
2. Highlight the desired missed call.
3. Press Options  Save to Contacts. For further details about the
Contacts feature, see “Adding a New Contact” on page 103.
Sending a Message to a Missed Call
1. From the Idle Screen, briefly press
and use the right
navigation key to scroll to the Missed calls screen (or select
 Recent Calls  Missed calls).
34
2. Highlight the desired missed call.
3. Press Options  Send Message.
4. From the Create screen, highlight the empty text field and use
the keypad to type a message. For more information, refer to
“Creating and Sending Messages” on page 39.
Deleting a Missed Call
1. From the Idle Screen, briefly press
and use the right
navigation key to scroll to the Missed calls screen (or select
 Recent Calls  Missed calls).
2. Highlight the desired missed call.
3. Press Options  Delete and press the right navigation key to
choose Selected or All.
4. At the Delete? prompt, press Yes to delete or No to cancel.
Call Time
1. Press
 Recent Calls  Call time. The following times
display:
• Last call time: shows the length of time for the last call.
• Total dialed: shows the total length of time for calls sent.
• Total received: shows the total length of time for calls received.
2. Press Reset to reset the counters.
3. Enter the user-defined password and press Confirm to reset all
counters. For more information, refer to “Change Phone
Password” on page 127.
35
Data Counter
The Data Counter measures to the amount of data sent to and from
the phone.
1. Press
 Recent Calls  Data counter. The following data
items display:
• Last Sent: shows the size of the last data packet (measured in KB kilobytes) sent by the phone since the last time this counter was reset.
• Last Received: shows the size of the last data packet (measured in KB
- kilobytes) received by the phone since the last time this counter was
reset.
• Total sent: shows the size of the total data packet (measured in KB kilobytes) which were sent by the phone since the last time this counter
was reset.
• Total received: shows the size of the total data packet (measured in
KB - kilobytes) which were received by the phone since the last time
this counter was reset.
2. Press Reset to set the counters to zero.
3. Enter the password and press Confirm to reset all counters. For
more information, refer to “Change Phone Password” on
page 127.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while
you have a call in progress, if this service is supported by the network,
 Settings  Calls  Voice Call  Call
and you have set the
Waiting menu to Activated. You are notified of an incoming call by a
call waiting tone.
36
To answer a call while you have a call in progress:
1. Press
to answer the next incoming call. The first call is
automatically placed on hold.
2. To switch between the two calls, press Options  Swap.
Swap places the current call on hold and then activates the
previous call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer multiple
incoming calls and place them on hold. If this service is supported by
the network, you can join the calls together into a multi-party call. A call
waiting tone notifies you of an incoming call.
Note: The Join option combines the calls you have established with your phone
(both active and on hold). Swap places the current call on hold and then
activates the previous call.
1. Press
to answer the first incoming call.
2. Press
or Accept to answer the next incoming call. The first
call is automatically put on hold.
3. Press Options  Join to join the two callers and create a multiparty call.
4. Press Options  Split to have a private conversation with one
participant. Select the number of the person you wish to talk with
and press Select; you can now talk privately to that person.
Other participants can still converse with each other. To return to
the multi-party call, press Options  Join.
5. Press
to end the call.
37
Section 5: Messaging
This section describes how to send or receive different types of
messages. It also includes the features and functionality associated
with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Multimedia Messages
• Voicemail
The Short Message Service (SMS) lets you send and receive text
messages to and from other mobile phones or email addresses. To
use this feature, you may need to subscribe to your service provider’s
message service.
The Multimedia Messaging Service (MMS) lets you send and receive
multimedia messages (such as picture messages) to and from other
mobile phones or email addresses. To use this feature, you may need
to subscribe to your service provider’s multimedia message service.
Important!: When creating a message, adding an image, a sound file, or a video
clip to a text message changes the message from a text message to a
multimedia message.
Messaging icons display at the top of the screen and indicate when
messages are received as well as their type. For more information,
refer to “Indicator Icons” on page 14.
38
Creating and Sending Messages
1.
From the Idle screen, press
Message.
 Messaging  Create
Tip: In Idle mode, you can create a new message by pressing up on the Navigation
key.
2. Use the keypad to enter a message. For more information, refer
to “Entering Text” on page 19.
3. Press Insert to insert one of the following into your message:
• Picture: allows you to choose a picture from the Photos folder.
• Video: inserts a video from the Videos folder.
• Sound: allows you to choose an audio file from the Sounds folder.
• Templates: allows you to insert pre-written sentences, such as “Call
me”.
• Emoticon: allows you to add emoticons to your message, such as a
happy face.
• Take Picture: allows you to temporarily exit the message, take a photo
with phone’s camera, and then add it to your message by pressing
Add.
• Record Video: allows you to temporarily exit the message, record a
video clip using the phone’s camera, and then add it to your message
by pressing Add.
• Record Sound: allows you to temporarily exit the message, record an
audio clip using the phone’s microphone, and then add it to your
message by pressing Options  Add to Message.
• Favorites URL: allows you to attach a web URL from your Favorites
list.
39
• Contact Info: allows you to tap on an existing Contacts entry, then add
it to your message by pressing Select.
4. Review your message and press Send to.
5. Enter a phone number or email address in the Recipients field.
– or –
Press Options  Add Recipients and select one of the following:
• Recent recipients: to select a recipient from your Recent recipients list.
• Contacts: to select a recipient from your Contacts list (valid entries
must have a wireless phone number or email address).
• Groups: to select a recipient from the Group list.
6. Press Send to send the message.
Attaching Business Card to a Message
To attach your Business Card to an outgoing message, follow these
steps:
1.
Create a contract entry containing your own information (the
information stored in the entry is used as a business card). For
more information, refer to “Adding a New Contact” on page 103.
2. Press
 Contacts  Contacts.
3. Highlight the contact (the business card) which you are sending
and press the
key.
4. Press Options  Send business card via and press the right
navigation key.
5. Select Message and press the
6. Enter your message.
40
key.
7. Press Send to, then add recipient(s).
8. Press Send.
Viewing New Received Messages
1.
In Idle mode, new messages are indicated by icons and a New
Message pop-up.
2. Press the View button from the New Message pop-up.
Note: If you accidentally exit from this notification screen, navigate to
Messaging  Inbox to access your messages.

3. Your message displays on the screen.
Using Message Options
Message options at the Inbox level differ according to the message
type, what you have done with the message, and whether you are
viewing the message.
1.
From the Idle screen, press
 Messaging  Inbox.
2. While viewing the list of messages highlight a message and
press the Options soft key to access the following:
• Reply: allows you to reply to the message via Text message.
• Call: allows you to dial the originating message number.
• Delete: allows you to delete Selected or Multiple messages.
• Forward: allows you to forward the message.
• Save to Contacts: allows you to save the recipient or sender’s
information from the message to Contacts on either the Phone or S M.
• More: provides the following options:
41
– Move to Phone/Move to S M Card: If a message is stored in the SIM card,
it is saved to the phone’s memory. If a message is stored in the phone’s
memory, it is then saved to the SIM card.
– Lock/Unlock: lets you lock a message so it cannot be deleted.
– Mark as Read: lets you mark an unread message as read.
– Sort by: allows you to sort the messages in your Inbox by Read/Unread,
Sender, Type, Subject, and size.
Note: When storing Contact information to the SIM card, only the Name, Number,
Group, and Slot location display initially. To save additional information for a
particular contact, such as other phone numbers, or e-mail, it is important to
add new fields to that Contact information. If you move the SIM card to
another phone that does not support additional fields on the SIM card, the
additional information is not available.
Outbox
This message box contains messages that were sent or will be sent.
When you enter this menu, the list of messages in the Outbox displays
with the recipients’ phone numbers or names, if available in your
Contacts.
• In Idle mode, press
 Messaging  Outbox.
Drafts
This message box stores unsent messages that you want to edit or
send later.
• In Idle mode, press
 Messaging  Drafts.
Voicemail
This option dials and connects you to the Voicemail center.
1.
42
Press
 Messaging  Voicemail.
2. Follow the prompts to configure options or receive messages.
Deleting Messages
When your phone’s memory is full, a notification message displays and
you cannot receive any new messages. Use the Delete option to erase
obsolete messages, freeing memory for new messages. You can
delete the messages either individually or all at one time.
1.
Press
 Messaging  Inbox, Outbox or Drafts.
2. To delete one message, highlight the message and press
Options  Delete  Selected.
To delete multiple messages, press Options  Delete 
Multiple, highlight each message to be deleted and press Check,
then press Delete.
Messaging Settings
To configure the settings for text messages, multimedia messages,
voicemail, and push messages.
•
Press
 Messaging  Messaging Settings.
Auto Delete Inbox
When you configure the Auto Cleanup option, messages are
automatically removed from the Inbox without a warning message.
1.
From the Messaging Settings page, press Auto Delete Inbox.
2. Select the age of messages before cleanup. Highlight Off, 1
Week Old, 2 Weeks Old, or The Oldest When Full and press Save.
43
Text Message
This option allows you to change your Text Message settings. You can
change the following:
• Delivery Options: allows you to choose character support (GSM alphabet,
Unicode or automatic), Reply Path, Get Delivery Report, and Keep a Copy.
• Text Message Center: this option allows you to select the Text Message
Center (SMS Centre, Center 2, Center 3).
Multimedia Message
The following Multimedia message options are available:
• Delivery Options:
– Priority: you can select the priority level of your messages. (High, Normal,
Low)
– Expiration: select the length of time you wish the message you sent to remain
on the MMS server.
– Delivery Time: you can set a time delay before the phone sends your
messages.
– Message Size: you can set the maximum allowed size for a multimedia
message.
– Get Delivery Report: when this option is enabled, the network informs you
whether or not your message was delivered.
– Get Read Report: when this option is enabled, the network informs you
whether or not your message was read.
– Keep a Copy: you specify whether you want to keep a copy of the sent
messages on your phone.
– Add My Business Card: you send your contact information along with your
messages.
44
• Receiving Options: you can specify the category of messages you want to
receive. Allows you to set the following:
– Home Network: allows you to set the message receipt options for your home
network. Choose from Auto Download, Manual or Reject.
– Roaming Network: allows you to set the message receipt options for your
home network. Choose from Auto Download, Manual, Restricted or Reject.
– Send Read Report: when this option is enabled, your phone sends a
notification back to the recipient indicating that your message was read.
Select between Allowed, Never, or Always ask.
– Send Delivery Report: when this option is enabled, the phone allow the
network report to the sender whether or not the message was received.
– Reject Anonymous: allows you to automatically reject messages with a
category of anonymous.
– Reject Advertisement: allows you to automatically reject messages with a
category of advertisement.
• MMS Profiles: you can select a connection profile used for sending and
receiving multimedia messages. The sending options are:
– <Service provider> Internet
– <Service provider> MMS
• Auto Resize Image: you can specify that an attached image be resized as
follows:
– No Resize
– 100 KB
– 300 KB
– 600 KB
• Creation Mode: you can specify that the users creating new media content
be given the following options:
– Free: create a multimedia message with no restrictions.
45
– Warning: sends a warning when unsupported content is included in a
message.
– Restricted: prevents you from including unsupported content.
• Default Style: you can specify the default visual parameters used by this
type of message:
– Font Color
– Font Style
– Background Color
– Slide Duration
Voicemail
The Voicemail option allows you edit the existing number and create a
new number to use when accessing remote voicemail.
Important!: Changing the Voicemail Center Address can affect your ability to
access your voicemail. Check with your provider’s Customer Service
before changing.
Push Message
Push Messages are messages sent from your service provider that
include software upgrades or general information. The following
options are available:
• Receiving Options: you can turn push message reception On or Off.
• Service Loading: Select Always, Prompt, or Never.
Broadcast Message
Broadcast message settings include:
• Activation: you can turn broadcast message reception On or Off.
• Receiving Channels: All Channels or My Channels.
46
• My Channels: Lets you create a channel list.
• Language: Selects languages for incoming broadcast messages.
Templates
You can speed message composition by including copies of stored
message content in your message.
From Idle mode, press
and select Messaging  Templates.
The following options are available:
– Text Templates
– Multimedia Templates
Sending a Text template
1.
From Idle mode, press
and select Messaging 
Templates  Text Templates.
2. Select a template from the Text Templates list and press Send.
The template displays in a new message.
Creating a Text template
1.
From Idle mode, press
and select Messaging 
Templates  Text Templates.
2. Select Options  Create.
3. Enter the text to be stored as a template.
4. Press Save.
Sending a Multimedia template
1.
From Idle mode, press
and select Messaging 
Templates  Multimedia Templates.
47
2. Select a template from the Multimedia Templates list and press
Options  Send. The template displays in a new message.
Creating a Multimedia template
1.
From Idle mode, press
and select Messaging 
Templates  Multimedia Templates.
2. Select Options  Create.
3. Enter the text to be stored in the template.
4. To add a multimedia file, press Insert and select Picture,
Video, Sound, Templates, Emoticon, Take Picture, Record
Video, Record Sound, Favorites URL or Contact Info.
5. Press Options  Save as Templates.
Delete by Folder
Lets you empty entire message folders.
and select Messaging  Delete
1.
From Idle mode, press
by Folder.
1.
Highlight a selection (All, Inbox, Outbox or Drafts).
2. Press Check to place a check mark next to the item.
3. Press the Delete soft key.
4. To enable the deletion of locked messages, press
a check mark beside Locked Message.
to place
5. Press Yes to delete the contents of the folder or Cancel to cancel.
Used Space
Shows the amount of space used for Multimedia Message, Text
Message, Push Message, Broadcast Message, and Configuration.
48
Section 6: Calendar
The Calendar feature allows you to view the Month, Week, and Day
layout views. It also shows any Missed Alarm Events that occurred.
To display your calendar:
•
Press
 Calendar. The Calendar displays in the default
(Month) view.
Creating a New Event
1. Press
 Calendar.
2. Press Options  Create.
3. Select one of the following event types and press the Select soft
key or the
key:
• Appointment
• Anniversary
• Holiday
• Important
• Private
4. Highlight the Title field and use the keypad to enter a name for
this specific event (up to 15 characters).
5. Continue to enter other information such as Details, Start date,
Start time, End date, End time, Location, Alarm, etc.
6. Press Save to store the new event.
49
Calendar Options
Options for the Calendar include:
• View: allows you to view a specified date.
• View By: allows you to choose between month view, day view or week
view.
• Create: allows you to select an event category: Appointment,
Anniversary, Holiday, Important or Private event.
• Go to: allows you to go to your today’s calendar or that of a specified
date.
• Event List: allows you to refer to your scheduled events stored on your
calendar according to the type of event: Appointments, Anniversaries,
Holidays, Important or Private.
• Delete: allows you to delete a calendar event. This option only appears
if you have added events to your calendar.
• Settings: this option allows you to configure the defaults for the
calendar’s Starting Day and View By (Month, Week, or Day).
• Missed alarm events: this option displays any missed events.
• Used Space: this option displays a list of the different Calendar event
categories along with the memory allocation for each.
Viewing an Event
1. Press
 Calendar  Options  Event list.
2. Select an event type, then press the Select soft key or the
key.
The events in the selected category display.
3. Press Back or press
50
to exit.
Deleting an Event
1. Press
 Calendar  Options  Event List.
2. Select an event type, then press the Select soft key or the
key.
The events in the selected category display.
3. Highlight an event to delete and press Options  Delete and
press the Right Navigation key.
4. Select Selected, Multiple, or All and press the
key.
5. Press Yes to delete or No to cancel.
6. Press Back or press
to exit.
51
Section 7: Browser
Your phone includes a WAP (Wireless Application Protocol) browser that
allows wireless access and navigation of the Web using your phone.
To access the browser via the menu:
From Idle mode, press
and select Browser.
The following options are available:
Home
Selecting this menu connects the phone to the network and loads the
default homepage.
From Idle mode, press
and select Browser  Home.
To scroll through the screen, use the Up and Down navigation keys.
For information on the menu options, see “Selecting and Using Menu
Options” on page 53.
Exiting the browser
To exit the browser at any time, press the
key.
Navigating the browser
1. To scroll through browser items, press the up or down
Navigation key.
2. To select browser items, press the
key.
3. To return to the previous page, press the Back soft key or the
key.
52
Entering Text in the browser
When you are prompted to enter text, the currently active text input
mode is indicated in the upper right corner of the screen. To change
the text input mode, press the Options soft key and select Text Mode
 a mode. The following modes are available:
• Multitap: allows you to enter upper and lower case text.
• T9 Predictive Text: saves keystrokes by completing words using a
built-in dictionary.
• Numeric: allows you to enter numbers.
• Symbols: lets you enter symbols.
• Add Word: lets you add a word to the internal dictionary.
For more information on text entry, see “Entering Text” on page 19.
Selecting and Using Menu Options
Various menus are available when you are using the browser to
navigate the Wireless Web.
To access the browser options menu:
1. Press the Options soft key.
Note: The menus may vary, depending on your browser version.
The following options are available:
– Open: opens the highlighted link.
– Navigate:
– Forward: opens the last accessed page after moving backward.
– Backward: opens the previous page.
– Reload: reloads the current page.
53
– Homepage: reopens the default homepage.
– Full screen/Normal screen: controls whether the icon bar and page title
are displayed at the top of the display, or the area is used to show more of
the accessed Web page.
– Smart-width view/Standard view: lets you change the page magnification.
– View Bookmarks: opens the Bookmarks list.
– Add to bookmarks: adds the current URL to Bookmarks.
– Enter URL: lets you manually enter the URL address of a web site
and access the site.
– Advanced:
– History: Lists all recently viewed URLs.
– Send URL via: sends the currently viewed URL to a recipient in a
message or via Bluetooth.
– Save: lets you save an Image or Web Page.
– Saved Pages: provides a list of saved web pages.
– Page Details: allows you to view details about the current page: Title,
Address, Size, MIME type, and Last updated.
– Browser settings: various settings are available, see “Browser Settings” on
page 56..
Enter URL
This menu allows you to manually enter the URL address of a web site
and access the site.
1. From Idle mode, press
and select Browser  Enter URL.
2. Enter the Web address into the URL box.
3. To also save a bookmark entry for the address, highlight Add
bookmark and press Check. Press the Down Navigation key
and enter a name for the site in the Title box.
54
4. Press
.
For further details about entering characters, see “Entering Text” on
page 19.
Bookmarks
This menu stores up to 100 URL addresses, simplifying future access.
To store a URL address:
1. From Idle mode, press
Bookmarks.
and select Browser 
2. Press Options and select Add bookmark.
3. Enter a name for the bookmark in the Title text box and press
the down key.
Note: For further details about how to enter characters, see “Entering Text” on
page 19.
4. Enter the address in the URL text box and press Save.
5. Highlight an item after saving a bookmark, then press the
Options soft key to access the following:
• Open: opens the web page.
• Edit: allows you to edit the bookmark title or URL.
• Add bookmark: allows you to enter a new bookmark URL.
• Send URL via: allows you to send the selected bookmark in a
message or via Bluetooth.
• Save to My Downloads: saves the bookmark to the My
Downloads  Other Files folder as a .vbm file.
55
• Delete: allows you to delete the Selected address or Multiple
addresses.
• Set as homepage: allows you to set the selected bookmark
as a homepage.
6. Select a URL and press
browser displays the site.
or Options  Open. Your
Saved pages
This option displays a list of the pages that were saved while
navigating the browser.
History
This option provides you with a list of the most recently visited web
sites. You can use these entries to return to previously visited, but not
bookmarked, web pages.
Browser Settings
Various settings are available when you are using the browser to
navigate the wireless web.
Clear Caches
You can clear the information stored in the cache, which is a temporary
memory area that stores recently accessed Web pages to speed up
future access.
Cookies
Use this option to delete cookies or set cookie options.
56
Empty Cookies
Cookies identify who you are when you revisit web sites; however, they
are also used to track your web surfing habits. Deleting cookies
increases security.
Cookie Options
Cookie mode allows you to Accept all cookies, Reject all cookies, or
Prompt you when a site wants to deposit a cookie.
Preferences
The Preferences option allows you to set browser preferences such as
Run JavaScript, Display Images, Play Sound, and Run Flash.
Browser profiles
Lets you choose a browser profile: <Service provider> Internet or <Service
provider> MMS.
About Browser
About Browser displays information about the browser such as the
type and version.
57
Section 8: Camera
This section explains how to use the camera in your phone. You can
take photographs and shoot video by using the built-in camera
functionality. Your 2.0 megapixel camera produces photos in JPEG
format.
Important!: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another
person’s privacy.
Using the Camera
Taking Photos
Taking pictures with your device’s built-in camera is as simple as
choosing a subject, pointing the camera, then pressing the camera
key.
1. In Idle mode, press the Camera key
camera mode.
to activate the
2. Using the phone’s main display screen as a viewfinder, adjust
the image by aiming the camera at the subject.
Note: The number of JPEG pictures remaining on the selected media displays in
the lower-left portion of the screen. This is an approximate number of total
pictures you can take at the current image size.
3. Press Menu before taking the photo to access various camera
options. For more information, refer to “Camera Options” on
page 59.
58
4. Press the Camera key
or the
key until the shutter
sounds. (The picture automatically stores within your designated
storage location. If no microSD card is installed, all pictures are
stored on the Phone.)
5. Press
to return to Idle mode.
Camera Options
Options are represented by icons across the top of the screen when
you press the Menu key.
• Camera/Camcorder: allows you to change between taking still photos or
videos.
• Shooting mode: allows you to set the shooting mode. Options are:
– Single: take a single photo and view it before returning to the shooting mode.
– Continuous: takes a succession of consecutive photos.
– Panorama: takes a landscape photo by taking an initial photo and then
adding additional images to the file. Slowly move the phone in any direction
and align the guide box with the viewfinder. When you have aligned the frame
and viewfinder, the frame turns green and the camera will automatically take
the next photo.Repeat this step for up to 6 segments.
– Smile shot: takes the picture when the subject smiles.
– Mosaic: takes multiple photos and then groups them together into a single
final photo.
– Frame: allows you to choose a custom frame border for your image. Choose
from one of the 30 available frames.
• Night Mode: increases sensor sensitivity to let you to take better pictures at
night. Select On or Off.
• Camera Resolution: allows you to set the image size to either:
2M(1600x1200), 1.3M(1280x960), 0.3M(640x480), or 320x240.
59
• White Balance: allows you to set this option from the following choices:
Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Metering: allows you to set how the camera measures or meters the light
level of the image area: Matrix, Center-weighted, or Spot.
• Effects: allows you to change the color tone or apply special effects to
the photo or video. Options include: None, Black and white, Sepia,
Negative, or Watercolor.
• Self Timer: delays the camera shutter by 2, 5, or 10 seconds after you press
the
key.
• Viewfinder mode: select Full screen view and indicators, Full screen view,
Full screen view and guidelines, or Standard ratio view.
• Settings: allows you to customize your camera settings. Choose from the
following options:
Settings: Photo tab
– Quality: allows you to set the image quality to: Economy, Fine, or Superfine.
– GPS: allows you to attach information on the location where the picture was
taken to the picture. This option is only available in Camera mode. The
following GPS icons display the GPS status in the indicator area:
–
: indicates that GPS is turned on and searching for GPS signal/location
information.
–
: indicates that GPS is turned on and is receiving GPS signal/location
information.
60
Note: To receive better GPS signals, avoid using your device in the following
conditions:
- inside a building or between buildings
- in a tunnel or underground passage
- in poor weather
- around high-voltage or electromagnetic fields
- in a vehicle with tinted windows
Settings: Setup tab
– Review screen: allows you to review a photo after taking it.
– Shutter sound: allows you to select a tone to play when the camera’s shutter
opens and closes. Sound selections are Shutter 1, Shutter 2, Shutter 3, or
None.
– Default storage: allows you to configure the default storage location
for images/videos as either Phone or Memory Card (if inserted).
– Shortcuts: allows you to see the shortcuts available for several of the
settings. 1=Mode, 2=Shooting mode, 3=Timer, #=Viewfinder mode.
Pictures/Videos Folder Options
After you have taken a photo or shot a video, you can access various
options:
•
Press Options and select one of the following:
• Take another/Record another: allows you to take another photo or
record another video.
• Play: allows you to play the video (this option only appears in
camcorder).
• Send via: allows you to send the photo or video via Message or
Bluetooth.
• Print via Bluetooth: allows you to print the picture using a Bluetoothenables printer (this option only appears in Camera).
61
• Delete: allows you to delete the picture or video.
• Set as: allows you to set the photo as a Main Display wallpaper, Front
Display wallpaper, or Caller ID (this option only appears in Camera).
• Edit: allows you to edit the picture (this option only appears in
Camera).
• Rotate: rotates the photo in 90 degree increments (this option only
appears in Camera).
• Properties: displays properties of the picture or video, including Name,
Format, Resolution, Size, Forwarding, Date Created, and Location.
Accessing the Picture Folder
1. Press
 Photos.
2. Highlight a photo and press
to open it in the viewer.
For more information, see “Photos” on page 68.
Editing a Photo
1. Press
 Photos.
2. Highlight a photo and press
to open it in the viewer.
3. Press Options  Edit image.
4. Press Options and select one of the following:
• Save as: allows you to save the picture on your phone or memory
card.
• Effects: allows you to choose from among several effects such as:
Filter, Style, Warp, or Partial blur.
• Adjust: allows you to adjust Brightness, Contrast, and Color.
• Transform: allows you to Resize, Rotate, or Flip the image.
62
• Crop: allows you to crop the image. Use the Navigation keys to place
the red box around the image until you center a portion in the box. To
change the box, press Options, select Size or Shape, use the
navigation keys to modify the size or shape.Press Options  Crop.
• Insert: allows you to add Frames, Clip Art, Emoticon, or Text to the
image.
• Set as: allows you to assign the current image as your Main Display
wallpaper, as your Front Display wallpaper, or as a Caller D image
used by a specific entry in Contacts.
• Send: allows you to send this picture via Message or Bluetooth.
• Print via Bluetooth: allows you to print the picture using a Bluetoothenables printer (this option only appears in Camera).
5. Press Save to save the changes.
Assigning an Image to a Contact Entry
1. Press
 My Downloads  Photos  <image>.
2. Press Options  Set as  Caller D.
3. Press Search contact, highlight an entry and press
.
– or –
Press Create contact to create a new Contacts entry with the
image already assigned to the new contact. For more
information, refer to “Contacts” on page 102.
63
Assigning an Image as a Wallpaper
1. Press
 My Downloads  Photos  <image>.
2. Press Options  Set as  Main Display or Cover Display.
The wallpaper appears as a preview.
3. If you are setting the wallpaper for the main display, press
Select to set the wallpaper.
4. If you are setting the wallpaper for the cover display, use the
navigation keys to move the selection area and press the + or soft keys to zoom in or out. Press
to select the highlighted
area of the image, then press Set to set the wallpaper.
Using the Camcorder
In addition to taking photos, the camera also doubles as a camcorder
allowing you to record, view, and send videos.
Shooting Video
Tip: When shooting video in direct sunlight or in bright conditions, it is
recommended that you provide your subject with sufficient light by having the
light source behind you.
1. In Idle mode, press the Camera key
camera mode.
to activate the
2. Press Menu, then Highlight Camcorder and press
.
3. Using the phone’s main display screen as a viewfinder, adjust
the image by aiming the camcorder at the subject.
4. Press the Camera key
64
or
key to record a video.
5. Press Stop or the Camera key to stop recording and save the
video file.
6. Once the file saves, press Options  Play to review the video.
7. Press
to return to Idle mode.
Camcorder Options
Options are represented by icons across the top of the screen when
you press the Options key.
• Camera/Camcorder Mode: allows you to change between taking still photos
or videos.
• Recording Mode: select a video recording mode. Select Normal to record a
video within the limit of the currently available memory. Select Limit for MMS
to record a video suitable for an MMS message.
• Camcorder Resolution: allows you to set the video size to 176x144 or
320x240 (if in Normal Recording Mode).
• White Balance: allows you to set this option from the following choices:
Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Metering: allows you to set how the camera measures or meters the light
level of the image area: Matrix, Center-weighted, or Spot.
• Effects: allows you to change the color tone or apply special effects to
the photo or video. Options include: None, Black and white, Sepia,
Negative, or Watercolor.
• Self Timer: lets you delay the start of the video after you press the
key.:
Off, 2 seconds, 5 seconds, 10 seconds.
• Viewfinder mode: select Full screen view and guidelines or Standard ratio
view.
65
• Settings: allows you to customize your camcorder settings. Choose from the
following options:
Settings: Video tab
– Quality: allows you to set the image quality to: Economy, Fine or Superfine.
– Audio recording: allows you to select whether audio is recorded with a video
recording.
Settings: Setup tab
– Review screen: allows you to review a video after taking it.
– Default storage: allows you to configure the default storage location
for images/videos as either Phone or Memory Card (if inserted).
– Shortcuts: allows you to see the shortcuts available for several of the
settings. 1=Mode, 2=Shooting mode, 3=Timer, #=Viewfinder mode.
Accessing the Video Folder
1. Press
 My Downloads  Videos.
2. Highlight the On phone or On card tab (wherever the video
resides) and select a video from the list.
3. Press
to view the video.
– or –
Before you play the video, press Options and select one of the
following:
• Play: plays the selected video file.
• Send via: allows you to send the video via Multimedia Message or via
Bluetooth.
• Delete: allows you to delete the Selected video or Multiple videos.
• Rename: allows you to rename the video file.
66
•
•
•
•
•
•
•
•
Move: allows you to choose the Selected or Multiple videos to move.
Copy: allows you to copy a selected or multiple videos.
Record Video: allows you to record another video.
Create Folder: creates a new My Downloads folder on either the
Phone or Memory Card.
Sort by: allows you to sort your videos by Date, Type, Name, or Size.
Bluetooth Visibility: allows you to set your bluetooth visibility so you
can send the video via bluetooth.
Lock /Unlock: allows you to lock or unlock a video.
Properties: allows you to see the details of your video including Name,
Format, Resolution, Size, Forwarding capability, Date created, and physical
Location.
67
Section 9: Photos
Use Photos to manage photos saved on your phone.
1. In Idle mode, press
and select Photos (or My Downloads 
Photos).
When you access this menu, your phone displays the photos in
Line view, which shows them as small images. Use the
Navigation keys to scroll through the photos.
2. To view a photo on the full screen, highlight the file and press
. To return to Line view, press
.
3. While viewing the photo list, press the Options soft key for these
options:
• View: opens the highlighted file.
• Send via: allows you to send the selected photo as a
Message or to a Bluetooth enabled device.
• Set as: allows you to set the photo as Main Display wallpaper,
Cover Display wallpaper, or Caller ID.
• Delete: allows you to delete the Selected photo or Multiple
photos.
• Rename: allows you to rename the photo.
• Move: allows you to move the Selected photo or Multiple
photos to another location.
68
• Copy: allows you to copy the Selected photo or Multiple
photos to another location.
• Take Photo: allows you to take another photo.
• Create Folder: allows you to create a new folder in which to
place this photo.
• Sort by: allows you to sort photos in this folder by Date, Type, Name,
or Size.
• Bluetooth visibility: allows you to enable the Selected or Multiple
photos so they are visible to other Bluetooth devices.
• Print via Bluetooth: allows you to print the selected photo using a
Bluetooth enabled printer.
• Lock/Unlock: allows you to lock the image to protect it from deletion, or
unlock it to allow deletion.
• Properties: allows you to view details about the selected image,
including Name, Format, Resolution, Size, Forwarding, Date created
and Location. Press the left or right navigation key to view Media
information (Name, Model, Date).
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to delete.
2. Press Options and select Delete.
3. To delete a single photo, choose Selected, press the Select soft
key or
key, and press the Yes soft key to confirm the
deletion
69
4. To delete a multiple photos, choose Multiple and press the
Select soft key or OK key. Highlight each file to be deleted and
press Check to place a checkmark in the selection box. Press
the Delete soft key to confirm the deletion.
5. Press
when you are finished.
Camera
Use your phone’s Camera to take photos of people or events while on
the move. Additionally, you can send these photos to other people in a
Picture message or set a wallpaper or caller ID image.
For more information about using the Camera and features, see
“Camera” on page 58.
70
Section 10: Videos
From the Videos menu you can record a video, or view the list of
videos downloaded from the web server or received in picture
messages. You can also view a video saved to your Videos folder or
memory card.
1. In Idle mode, press
and select My Downloads  Videos.
When you access this menu, your phone displays the videos in
Line view, which shows them as small images. Use the
Navigation keys to scroll through the photos.
2. Highlight a video clip from your Videos folder, then press
Options to choose from these options:
• Play: plays the highlighted video file.
• Send via: sends the video in a Message or to a Bluetooth
enabled device.
• Delete: deletes the Selected or Multiple video files.
• Rename: changes the name of the video.
• Move: allows you to move the Selected or Multiple videos to
another location.
• Copy: allows you to copy the Selected or Multiple videos to
another location.
• Record Video: lets you record another video file.
• Create folder: allows you to create a new folder to contain
your videos.
71
• Sort by: allows you to sort and view videos by Date, Type, Name, or
Size.
• Bluetooth visibility: makes Selected or Multiple voice files visible to a
Bluetooth device.
• Lock/Unlock: locks the voice file to protect it from deletion, or unlocks
the voice file to allow deletion.
• Properties: shows properties of the video, such as Name, Format,
Resolution, Size, Forwarding, Date created, and Location.
Record Video
Use your phone’s Camcorder to take videos of people or events while
on the move. You can send these videos in a message or to another
Bluetooth device.
For more information about using the Camcorder and its features, see
“Using the Camcorder” on page 64.
72
Section 11: Tools
Tools are feature options that allow you to use your handset for a
variety of non-phone related activities. To access any of the tools:
•
Press
 Tools.
Camera
For information on using the camera, see “Camera” on page 58.
Music Player
The Music Player is an application that can play music files. The music
player supports files with extensions .mp3, .wma, and .aac. Launching
the Music Player allows you to navigate within your Music folders and
select playback material.
1. In Idle mode, press
(or
 Tools  Music Player).
2. Press Library (if the music player is already activated). Choose
All tracks, Artists, Albums, Playlists or Genres and press
3.
.
Highlight a song and press the
key to play the song. You
can also press the Options soft key and select one of the
following options:
• Add to Playlist: allows you to add the Selected, Multiple, or
All music files to a playlist.
• Delete: allows you to delete the Selected, Multiple or All files.
• Send via: allows you to send this music file as a Message or
to a Bluetooth device.
73
• Set as: allows you to set this music file as Call Ringtone,
Caller Ringtone or Alarm tone.
• Properties: displays Basic details about the selected music
file. Press the right or left navigation key to view Media
information.
• Settings: set Background Playing, and Sound Effects
(equalizer setting: Normal, Rock, Pop, Dance, Classic, Jazz,
Wide, Dynamic, Surround).
Music Player Options
The Music Player options menu configures your phone’s music playing
options such as shuffling the music files, repeating music files, adding
songs to the playlist, and more.
1. In Idle mode, press
74
 Tools  Music Player.
2.
Navigate to a music file and press the
will begin to play.
key. The music file
3.
Press the Options soft key and select one of the
following options:
• Transfer to Bluetooth stereo headset: transfers the selected music file
to a Bluetooth stereo headset.
• Repeat mode: repeats the currently active song or replays each
song in the current list and as the last song in the list ends, the
player replays all of the songs in the listed order. Select Off, 1,
or All.
• Shuffle on /off: allows you to turn shuffle On or Off. When turned on,
the current list of songs are randomly shuffled for playback.
• Set as: allows you to set this music file as Call Ringtone,
Caller Ringtone or Alarm tone.
4.
• Add to Playlist: adds the currently active song to either a new or
current playlist.
• Send via: sends the selected music file in a message or to a Bluetooth
enabled device.
• Properties: displays properties related to the selected song such as:
Name, Format, Size, Forwarding, Date created, Track length, Genre,
Location, Description, and Track Number. Properties may differ
depending on song.
• Settings: allows you to set Background playing to on or off, and allows
you to set Sound Effects (equalizer setting: Normal, Rock, Pop,
Dance, Classic, Jazz, Wide, Dynamic, or Surround).
Press the Select soft key and follow the prompts to set the
selected option.
Playing Music through a Stereo Bluetooth Device
Your device supports the Stereo Bluetooth profile (A2DP) that allows
synchronization of a stereo Bluetooth headset to listen to music in
stereo.
1. Pair your handset to a stereo Bluetooth device. For specific
pairing procedures, see “Connectivity” on page 131.
2.
In Idle mode, press
3.
Navigate to a music file and press the
will begin to play through the headset.
 Tools  Music Player  All tracks.
key. The music file
75
Playing Music while Using the Phone
The Music Player allows you to play music in the background while
performing other tasks on your phone. The music pauses when an
incoming call is accepted, and the music resumes when the call ends.
Music continues to play when you receive messages.
The other functions you can use are:
• Call: make or receive a call (music player is paused)
• Messaging: send or receive a text or multimedia message. Music continues
to play unless an audio clip is received as a part of a multimedia message.
• Browser: browse the web (music continues to play).
• Games: lets you play games while listening to music.
Note: Playing music and pausing the music player uses the same amount of
battery.
1. In Idle mode, press
 Tools  Music Player.
2.
Select a folder and press the
3.
Highlight a song to play and press the
key.
4.
To minimize the Music Player, press the
5.
To stop the Music Player, press the
Yes.
key.
key once.
key again and select
After the Music Player enables, you can listen to music in the
background while performing other phone functions.
76
Important!: When finished using the Music Player function, press the
key
twice to stop the function and prevent the battery from losing its charge.
Pausing the player continues to use the battery.
Using Playlists
Playlists are used to assign songs to a list of preferred media which
can then be grouped into a list for later playback. These Playlists can
be created via either the handset’s Music Player options menu or from
within a 3rd party music application (such as Windows Media Player)
and then downloaded to the handset.
Creating a Playlist
1. In Idle mode, press
 Tools  Music Player  Library (if
necessary)  Playlists  Create playlist.
2.
Enter a playlist name in the Enter Name field and press the Save
soft key.
3.
Select All tracks and press the Select soft key or the
4.
Highlight each song you want to add to the playlist and press the
key to place a check mark next to the song. You can also
select All to add all songs on the list.
5.
Press the Add soft key.
6.
Press the
key.
key to return to Idle mode.
Adding Songs to a Playlist
1. In Idle mode, press
 Tools  Music Player  Library (if
necessary)  Playlists.
77
2.
Highlight a previously created playlist.
3.
Press the Options soft key, select Add Tracks and press the
Select soft key or the
key.
4.
Select each song you want to add to the playlist and press the
key to place a check mark next to the song. You can also
select All to add all songs on the list.
5.
Press the Add soft key.
6.
Press the
key to return to Idle mode.
Removing songs from a Playlist
1. In Idle mode, press
 Tools  Music Player  Library (if
necessary)  Playlists.
2.
Highlight a previously created playlist and press the
3.
To remove one song, highlight the track to delete, press the
Options soft key and select Remove  Selected  Yes.
key.
4.
To remove multiple songs, press the Options soft key and select
Remove  Multiple. Highlight each song you want to remove
from the playlist and press the
key to place a check mark
next to the song. Press the Remove soft key.
5.
To remove all songs, press the Options soft key and select
Remove  All  Yes.
6.
Press the
key.
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition program used to activate a wide variety of functions on
78
your phone. Nuance software automatically voice activates up to 1,000
contacts for voice dialing and searching. No pre-recording or training is
needed. Speak a contact name naturally to dial, and use your voice to
look up contacts, launch applications and navigate phone menus.
1. Press
2.
 Tools  Voice Recognition.
At the voice prompt, say a command. Following is a list of
available commands.
Note: This list of voice commands briefly displays.
Say a Command Options
• Call <Name or #>: dials a name or number listed in your contact list. If
multiple numbers exist (i.e. home, work, or other) say the name and the
number type (location).
• Send Message <Name or #>: displays the Create Text Message screen.
• Lookup <Name>: allows you use a voice command to locate and display
contact information stored in the Contacts list.
• Go to <App>: accesses all the features of your phone if they are activated,
such as: Voice mail, Contacts, Ringtones, Calendar, Tasks, and Browser.
• Check <Item>: lets you check your phone's status in the same report (Status,
Messages, Missed Calls, Time, Signal strength, Network, Battery, My Phone
Number, and Volume).
While the Say a Command screen displays you have two options:
• Tutorial: provides examples of how to use the voice commands.
• Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.
79
If the phone does not recognize your command the Command not
recognized screen displays with two options:
• Help: provides instructions on how to use voice commands.
• Restart: press and try the command options again.
Speak clearly when giving your command. There is no need for you to
speak slowly or with added emphasis. The voice recognition software
has been optimized to understand your speech in its natural form. If it
does not recognize your command after a few seconds, a voice prompt
asks you to repeat the command. If it does not recognize your
command again, the following message displays “Sorry, no match
found,” and voice recognition turns off.
You must end your current Voice Commands call before you can make
another call using Voice Commands. You can only originate the first
call in a 3-way call using Voice Commands.
Voice Recognition Tips
• Wait for the tone before you speak.
• Speak clearly and at a normal volume.
• There is no need to use paused speech. The voice recognition software has
been trained to recognize natural speech, and performs best when you
speak naturally.
• In very noise environments, it may be helpful to use a headset or a Bluetooth
headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your Contacts
list and voice-activates all the names.
80
When you add or change contacts, the software automatically reloads
and voice-activates the list when you add or modify a contact.
Record Audio
Record Audio allows you to record voice memos. It also allows you to
send your audio clip to other people as an attachment of an MMS
message. Recording time will vary based on the available memory
within the phone.
1. Press
 Tools  Record Audio. For more information,
refer to “Record Audio Settings” on page 141.
2.
To start recording, press
the microphone.
. Record a memo by speaking into
3.
During the recording process you can either press Stop to stop
the recording or Pause to temporarily halt the recording. Once
the audio recording has stopped, the message is automatically
saved.
4.
Once stopped, press Options to choose from one of the
following options:
• Play: allows you to play the memo.
• Record: allows you to save the current memo and begin another
session.
• My Voice Clips: allows you to listen to your audio clips.
• Record Audio Settings: allows you to set the Output format (amr or
mp3), Save output to Phone or Memory Card, and turn Unlimited
recording on or off.
• Send via: allows you to send your voice clip to others via a message or
to a Bluetooth device.
81
5.
• Set as: allows you to set the current memo as a Call Ringtone, Caller
Ringtone or an Alarm Tone.
• Delete: allows you to delete the current memo.
• More: displays the following additional options:
– Rename: allows you to rename the audio file.
– Lock/Unlock: allows you to lock/unlock the Audio file. Lock prevents the
audio file from deletion. Unlock allows deletion.
– Bluetooth Visibility: allows you to make the audio file visible to a Bluetooth
device.
– Properties: displays the Name, Format, Size, Forwarding, Creation Date
and Time, and Location of the voice memo.
Press
or press
to exit.
Alarms
This feature allows you to set an alarm to ring at a specific time.
1. Press
 Tools  Alarms.
The following options display:
•
•
•
•
•
•
Wake-up Alarm: the alarm rings to wake you up at the specified time.
Alarm 1: primary alarm setting.
Alarm 2: secondary alarm setting.
Alarm 3: third alarm setting.
Alarm 4: fourth alarm setting.
Auto power: when turned on, alarms ring even when the phone is
turned off.
2. Select an alarm and press the
key.
– or –
82
Press Options  Create alarm.
3. Set the following options:
• Name: allows you to use a specific name for the alarm. The name you
enter will display on the screen when the alarm activates.
• Alarm activation: use the Left or Right Navigation key to select On or Off.
• Alarm time: use the Left or Right Navigation key to highlight the
minutes or hours field and enter a number using the keypad. Highlight
AM/PM and use the Right Navigation key to toggle the setting. Press
Save to save the new values.
Note: To change the time format, see “Time and Date” on page 121.
• Alarm type: sets the way in which the alarm sounds when activated
(Melody, Increasing Melody, Vibration, Vibration then Melody, Vibration
and Melody, or Vibration and Increasing Melody).
• Alarm tone: sets the sound file that is played when the alarm is
activated.
• Alarm volume: adjusts the alarm’s volume (1 - 7).
• Recurrence: use this option to set the repeating status for the alarm by
placing a checkmark alongside those days you would like to use for
the current alarm. Everyday places a checkmark alongside all days.
• Snooze: use this option to set Snooze duration (Off, 5, 10, 15, 20, or 30
Minutes) and Repeat (1, 2, 3, 5, or 10 times).
4. Press Save to store the alarm details.
Setting Auto Power-up Alarms
You can set the phone to ring the alarm at the specified alarm time,
even if the phone is switched off.
83
1. Press
 Tools  Alarms.
2. Highlight Auto power and press the
key.
3. Select On and press Save.
Note: If the menu option is set to Off, and the phone is switched off at the specified
time, the alarm does not ring.
Turning Off an Alarm
To cancel the alarm when it rings, press any key (except Snooze).
If Snooze is enabled in the alarm settings, you can press Snooze to
delay the alarm by the length of time selected in the Snooze setting.
Calendar
The Calendar feature allows you to view the Month, Week, and Day
layout views. It also shows any Missed Alarm Events that occurred.
For more information on using the Calendar, see “Calendar” on
page 49.
Tasks
This menu option allows you to create a “to do” list.
1. Press
84
 Tools  Tasks
2.
Press Options  Create.
3.
Enter the information into the following fields and press Save:
• Title: enter a title for this task (up to 15 characters).
• Details: enter a detailed description for this task (up to 100 characters).
• Start date: enter a date for this task to begin.
• Due date: enter a date for this task to end.
4.
• Alarm: allows you to trigger an alarm for this task. Press Check to
select this option.
• Alarm date: enter a date for this alarm (format is MM/DD/YYYY).
• Alarm time: enter a time for this alarm to sound. Press Save to assign
the new time.
• Alarm tone: allows you to choose an alarm tone. Once selected,
navigate to a file location, select a file, and press Select to assign the
audio file as the current alarm tone.
• Priority: allows you assign the task a priority (1-high, 2-medium, or 3low).
Press Save to store the new task.
While in the task list, press Options to access the following options:
• View: opens the highlighted task.
• Create: lets you create a new task.
• Send via: allows you to send the highlighted task to others via
Multimedia Message or to a Bluetooth device.
• Done/Not done: marks the highlighted task as completed or not
completed (adds/removes check mark in the box at the left side).
• Sort by: sorts the tasks in the list by Done, Due date or priority.
• Delete: lets you delete Selected, Multiple, All or Done tasks.
• Save to My Downloads: saves the task as a .vcs file to the Other
Files folder in My Downloads.
• Print via Bluetooth: lets you print the task list to a Bluetooth-enabled
printer.
• Missed alarm events: shows any events not completed and alarm
time has passed.
85
• Used Space: shows the number of tasks created out of a possible
100.
Memo
This option allows you to create and save memos.
1. Press
 Tools  Memo
2.
Press Options  Create.
3.
Use the keypad to enter a new note and press Save.
While in the memo list, press Options to access the following options:
• View: opens the highlighted memo file.
• Create: lets you create a new memo.
• Send via: allows you to send a memo to others via Multimedia
Message or to a Bluetooth device.
• Delete: lets you delete Selected, Multiple, All or Done tasks.
• Save to My Downloads: saves the memo as a .vnt file to the Other
Files folder in My Downloads.
• Print via Bluetooth: lets you print the highlighted memo to a
Bluetooth-enabled printer.
• Used Space: shows the number of memos created out of a possible
100.
Calculator
With this feature, you can use the phone as a calculator. The calculator
provides the basic arithmetic functions; addition, subtraction,
multiplication, and division.
1. Press
2.
86
 Tools  Calculator.
Enter the first number using the keypad.
Note: Enter a decimal point, left bracket or right bracket by pressing the left soft key
1, 2, or 3 times. Use the
and
keys to move forward and backward
in the number to make corrections.
3.
Enter the operation for your calculation by using the Navigation
keys to select the arithmetic function.
4.
Enter additional numbers and operators as required.
5.
To view the result, press
.
Tip Calculator
The Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total amount of the check, a selected
percentage, and the number of people paying.
1. Press
 Tools  Tip Calculator.
2.
Highlight the Bill field and use the keypad to enter the total
amount of the bill.
3.
If desired, select the Tip (%) field and use the keypad to change
the tip percentage.
4.
Enter the number of people splitting the bill in the # paying field.
5.
The amount of the Tip ($) and You pay displays.
6.
Press Reset to clear the fields and start over.
Converter
Your phone comes with a built-in converter that performs the following
types of unit conversions:
87
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
1. Press
 Tools  Converter.
2.
3.
Select the required converter function and press the
key.
• Each converter function has a field for the type of unit to convert, and
the type of unit to convert to. An additional field allows you to input the
unit amount to convert.
Press the Left and Right Navigation keys to select the Unit to be
converted.
4.
Highlight the field below the Unit and enter the value to be
converted.
5.
Highlight the second Unit field and press the Left or Right
Navigation key to select the new unit.
6.
The resulting converted value automatically displays below the second
Unit field.
7.
Press Back or
to exit.
World Clock
World Clock allows you to view the time in other parts of the world. It
displays the time in different cities in all 24 time zones around the
world.
To add another time zone:
88
1. Press
 Tools  World Clock.
2.
Press Options  Add.
3.
Press the Left or Right Navigation key until you locate the desired
global region.
Important!: Time zones display in Greenwich Mean Time (GMT).
4.
If the location supports Daylight Savings Time, highlight Daylight
saving and press the Check key.
5.
Press
to select the time zone.
Deleting a World Clock Entry
1. Press
 Tools  World Clock.
2.
Highlight a World Clock entry.
3.
Press Options  Delete.
4.
At the Delete? prompt, press Yes to delete or No to cancel.
89
Timer
You can use this menu to set a timer to count down a preset amount of
time (hours, minutes, and seconds).
1. Press
 Tools  Timer.
2.
Press Set and use the keypad to enter a countdown time length
for the alert by setting the Hours, Minutes, and Seconds value,
then press the OK soft key.
3.
Press the
key to begin the timer.
4.
Press the
key to pause the timer.
5.
Press the OK soft key or
key to stop the alarm.
Stopwatch
You can use this menu to measure intervals of time.
1. Press
90
 Tools  Stopwatch
2.
Press Start to start the counter.
3.
Press Lap to measure lap time, Stop to stop the stopwatch. You
can record multiple lap times.
4.
Press Reset to erase all times recorded.
Section 12: My Downloads
Photos
For information on using Photos to manage photos saved on your
phone, see “Photos” on page 68.
Music
Your phone’s Music features allow you to play and manage the music
files stored on your phone.
1. From Idle mode, press
and select My Downloads 
Music.
2. Highlight a music file and press the Options soft key to choose
from the following options:
• Play: plays the music file.
• Add to Playlist: allows you to add the selected music file to a
playlist.
• Send via: allows you to send the selected music file via
Message or to a Bluetooth enabled device.
• Set as: allows you to set the music file as Call Ringtone, Caller
Ringtone or Alarm tone.
• Delete: allows you to delete the Selected or Multiple music
files.
• Rename: renames the file.
• Move: moves the Selected or Multiple files to another location.
91
• Copy: copies the Selected or Multiple files to another location.
• Create Folder: allows you to create a new folder in which to
store music files.
• Sort by: lists the files by Date, Type, Name, or Size.
• Bluetooth visibility: allows you share the Selected file or Multiple
files with other Bluetooth devices.
• Lock/Unlock: locks the file to protect it from deletion, or unlocks it to
allow deletion.
• Properties: displays Basic details (Name, Format, Size, Forwarding,
Date created, and Location) or Media Information about the file.
Music Player
Use Music Player to add music files or play music stored in your
playlist. For more information on using the Music Player, see “Music
Player” on page 73.
Images
In this menu, you can view images downloaded from the web or
received in messages. You can set an image as a background image.
From Idle mode, press
and select My Downloads  Images.
The following options are available:
Wallpapers
This folder contains preconfigured wallpapers.
Scroll to the wallpaper you want to view and press the Options soft
key to access the following options:
• View: opens the selected image.
92
• Set as: sets the image as Main Display wallpaper, Cover
display wallpaper, or as a Caller ID.
• Take Photo: allows you to take a photo that can be used as a
wallpaper.
• Create Folder: creates a new folder in which to contain your
own images.
• Sort by: lists the images by Date, Type, Name, or Size.
• Properties: displays the image Name, Format, Resolution, Size,
Forwarding, Date created, and location.
Downloaded images
This menu allows you to access downloaded images on your phone.
Scroll to the image you want to view and press the Options soft key
to access the following options:
• View: opens the selected image.
• Send via: creates a message to send the image as a
Message or to another Bluetooth device.
• Set as: sets the image as Main Display wallpaper, Cover
display wallpaper, or as a Caller ID.
• Delete: erases the Selected image or Multiple images.
• Rename: renames the image.
• Move: moves the Selected or Multiple images to another
location.
• Copy: copies the Selected or Multiple images to another
location.
93
• Take Photo: allows you to take another photo with the
camera.
• Create Folder: allows you to create a new folder in which to
store images.
• Sort by: lists images by Date, Type, Name, or Size.
• Bluetooth visibility: allows you share the Selected file or Multiple
files with other Bluetooth devices.
• Print via Bluetooth: prints the selected image on a Bluetooth-enabled
printer.
• Lock/Unlock: locks the image to protect it from deletion, or unlocks it to
allow deletion.
• Properties: displays Basic details (Name, Format, Resolution, Size,
Forwarding, Date created, Location) or Media Information about the
image.
Sounds
In this menu, you can view the list of sounds downloaded from the web
server or received in messages. You can also set a downloaded sound
as the current ringtone.
From Idle mode, press
and select My Downloads  Sounds.
Get New Ringtones
Using the Get new ringtones option on the sounds list, you can
quickly access your service provider’s website and use the browser to
download new ringtones.
Press
94
to connect and purchase additional ringtones.
Sounds
Use Sounds to manage sounds on your phone.
Highlight an item in the Sounds menu and press the Options soft
key. The following options are available:
• Play: plays the selected sound.
• Send via: allows you to send this voice file as a Message or to
a Bluetooth enabled device.
• Set as: allows you to set the sound as Call Ringtone, Caller
Ringtone or Alarm tone.
• Create Folder: allows you to create a new folder to contain
sounds.
• Delete: deletes Selected or Multiple sound files.
• Rename: allows you to rename the selected sound file.
• Move: moves Selected or Multiple sound files to another
folder.
• Copy: copies Selected or Multiple sound files to another
folder.
• Sort by: allows you to sort sound files by: Date, Type, Name, or Size.
• Bluetooth visibility: makes Selected or Multiple sound files visible to a
Bluetooth device.
• Lock/Unlock: locks the sound file to protect it from deletion, or unlocks
the file to allow deletion.
95
• Properties: displays Basic Details such as sound name, format, size,
forwarding, date, and location. Press the left or right navigation key to
display Media information such as Track length and Format.
Voice list
Voice list contains your recorded audio messages.
Highlight an item and press the Options soft key. The following
options are available:
• Play: Plays the recorded message.
• Send via: allows you to send this voice file as a Message or to
a Bluetooth enabled device.
• Set as: allows you to set the voice file as Call Ringtone, Caller
Ringtone or Alarm tone.
• Delete: deletes Selected or Multiple voice files.
• Rename: allows you to rename the selected voice file.
• Move: moves Selected or Multiple voice files to another folder.
• Copy: copies Selected or Multiple voice files to another folder.
• Record Audio: lets you record another audio file.
• Create Folder: allows you to create a new folder for voice
files.
• Sort by: sorts the voice files by Date, Type, Name, or Size.
• Bluetooth visibility: makes Selected or Multiple voice files visible to a
Bluetooth device.
• Lock/Unlock: locks the voice file to protect it from deletion, or unlocks
the voice file to allow deletion.
96
• Properties: displays Basic details about this voice file such as: Name,
Format, Size, Forwarding, Date created, and Location.
Voice recorder
Use Voice Recorder to record an audio file.
1. From Idle mode, press
and select My Downloads  Sounds 
Voice list  Voice recorder.
2. Press Record and begin recording your voice message.
3. Press Stop when you are finished recording.
Note: The message automatically saves to the Voice list.
4. Press Options and select one of the following options:
• Play: plays back the recording.
• Record: lets you record another message.
• Record Audio Settings: allows you to set the Output format (amr or
mp3), Save output to Phone or Memory Card, and turn Unlimited
recording on or off.
• Send via: allows you to send the voice recording as a
Message or to another Bluetooth enabled device.
• Set as: sets the voice recording as Call Ringtone, Caller
Ringtone or Alarm tone.
• Delete: deletes the selected voice recording.
• More:
– Rename: allows you to rename the file.
97
– Lock/Unlock: locks the voice file to protect it from deletion, or unlocks the
voice file to allow deletion.
– Bluetooth visibility: makes Selected or Multiple voice files visible to a
Bluetooth device.
– Properties: displays details about the voice recording, such as Name,
Format, Size, Forwarding, Date created, and Location.
Videos
From the Videos menu you can record a video, or view the list of
videos downloaded from the web server or received in picture
messages. You can also view a video saved to your Videos folder or
memory card.
For information on using Videos, see “Videos” on page 71.
Games and Apps
Use Games and Apps to download MIDlets (Java applications that run
on mobile phones) from various sources using the browser and store
them in your phone.
From Idle mode, press
and select My Downloads  Games
and Apps.
When you access the Games and Apps menu, the list of default
games displays. When you download new games, they are added to
the list.
Get New Games
You can download games from your service provider’s website using
the Get New Games option.
1. From Idle mode, press
98
and select My Downloads  Games and
Apps  Get New Games.
2. Follow the onscreen instructions to browse and download
games.
Note: When downloading games, charges may apply. MIDlet game options differ
depending on the MIDlet selected.
Get New Applications
You can download apps from your service provider’s website using the
Get New Applications option.
1. From Idle mode, press
and select My Downloads 
Games and Apps  Get New Applications.
2. Follow the onscreen instructions to browse and download apps.
Note: When downloading apps, charges may apply.
Other Files
This folder provides a location where you can store various types of
files on your phone, such as spreadsheets, text files and
presentations. You can also view files in Microsoft Word (.doc),
Microsoft Excel (.xls), Adobe PDF, or Plain text format; send files to
others via Bluetooth; and move or copy files to your memory card.
1. From Idle mode, press
and select My Downloads  Other
Files.
2. Highlight a file, then press Options to choose from these options:
99
• View: opens the highlighted file.
• Send via: allows you to send this file in a Message (when
possible) or to a Bluetooth enabled device.
• Delete: deletes Selected or Multiple files.
• Rename: allows you to rename the selected file.
• Move: moves Selected or Multiple files to another folder.
• Copy: copies Selected or Multiple files to another folder.
• Create Folder: allows you to create a new folder for file
storage.
• Sort by: sorts the voice files by Date, Type, Name, or Size.
• Bluetooth visibility: makes Selected or Multiple voice files visible to a
Bluetooth device.
• Lock/Unlock: locks the voice file to protect it from deletion, or unlocks
the voice file to allow deletion.
• Properties: displays Basic details about this voice file such as: Name,
Format, Size, Forwarding, Date created, and Location.
3. To view a Microsoft Word, Microsoft Excel, Adobe PDF, or Plain
text file, highlight the file and press
or Options  View.
Used Space
With Used Space, you can check the amount of memory being used
and memory remaining for Photos, Music, Images, Sounds, Videos
and Other Files.
•
100
From Idle mode, press
Space.
and select My Downloads  Used
Press the left or right navigation keys to scroll between the memory
status On phone or On memory card.
101
Section 13: Contacts
This section allows you to manage your contact information by storing
names and numbers in Contacts. You can sort entries by name, entry,
or group.
Now, managing and keeping your contacts safe and accessible has
never been easier!
Note: When storing a contact entry into your SIM card, note that only the name,
phone number, group, and slot location are initially offered as fields (some
SIM cards may allow an address as well). Although you may add additional
fields to a SIM entry; if you move that same SIM card to another model
phone, it is possible that only the basic information will transfer.
Contact Settings
1. Press Contacts  Contacts Settings.
2.
102
Press any of the following options to activate a function:
• My Business Card: creates and attaches a virtual business card as an
attachment to outgoing messages. For more information, see
“Attaching Business Card to a Message” on page 40.
• Save New Contacts to: defines the destination for new contact entries
(Phone Memory, S M Card, or Always Ask).
• View Contacts from: to filter the display of current Contacts entries.
Options include: All, Phone Memory, or SIM Memory.
• Own Number: to display your current phone number (page 108).
• FDN Contacts: assigns phone numbers as FDN entries (page 108).
• Used Space: displays the memory storage allocation (total available
and remaining) within your Phone, S M card, Additional No. 1,
Additional No. 2, Email, Nickname, and FDN Contacts.
Adding a New Contact
Use the following procedure to store a new contact to Contacts. New
contacts are stored on your phone by default.
Saving a Number from the Idle screen
1. Press Contacts  Add New Contact. The Create contact screen
displays.
2.
Highlight the First Name, Last Name, and Display Name fields and
use the keypad to enter names for this contact. For more
information, refer to “Entering Text” on page 19.
3.
Press the Mobile, Private field and use the keypad to enter the
phone number for this contact.
4.
Highlight the Landline, Private field and use the keypad to enter
the landline number for this contact.
5.
Highlight the Email, Private field and use the keypad to enter a
private email address for this contact.
6.
Highlight the Group field and press
and press
.
7.
Highlight the Picture field and press
8.
Highlight the Ringtone field and press
9.
Select a tone to represent this contact and press Options 
Select.
. Select a group name
10. Highlight the Message tone field and press
.
.
103
11. Select a tone to represent this contact and press Options 
Select.
12. Highlight the Notes field and use the keypad to enter a note. For
more information, refer to “Entering Text” on page 19.
13. Press Options  Save.
Note: By default, Contacts are saved on the phone. To copy them to a SIM card,
see “Copying an Entry to the SIM Card” on page 112.
Adding More Fields to a Number
While in the process of creating a new entry or editing an existing
contact, you can add additional fields to the entry’s list of information.
1. Press Contacts  Contacts, highlight a contact name and press
.
2.
Press Options  Edit.
3.
Press Options  Add More Fields.
4.
From the Add Details field, use the Left or Right Navigation key
to highlight the field to add and press Select or
.
The selected field type displays on the Edit Contact screen.
5.
Enter the information into the new field and press
Options  Save.
Deleting Fields From a Number
1. Press Contacts  Contacts, highlight a contact name and press
.
2.
104
Press Options  Edit.
3.
Highlight the field to delete and press Options  Delete Field.
Note: Only certain new fields may be deleted. If you have not added any new fields
to the contact, the Delete Field button does not display.
4.
Press Options  Save.
Saving a Number During a Call
1. During the call press Options  Save to Contacts.
2.
3.
4.
At the prompt, select New.
• Select Update if this was a previously created entry and your are
adding the current number to the previous entry.
Select the type of phone number and press Select or
.
Enter the desired information, see “Saving a Number from the
Idle screen” on page 103.
Saving a Number After a Call Has Ended
1. Press
to bring up the Recent Calls screen.
2.
Highlight a phone number from the list and press Options 
Save to Contacts.
3.
From the Select type screen, press New.
• Select Update if this was a previously created entry and your are
adding the current number to the previous entry.
Enter the desired information. For more information, refer to
“Saving a Number from the Idle screen” on page 103.
4.
105
Adding Pauses to Contact Numbers
When you call automated systems, you are often required to enter a
password or account number. Instead of manually entering the
numbers each time, you can store the numbers in your Contacts along
with special characters called pauses.
To add a pause to a Contact:
1. In Idle mode, press Contacts  Contacts.
.
2.
Highlight a contact name and press
3.
Press Options  Edit.
4.
Highlight the number type where you want to add the pause.
5.
Scroll to where you want to add the pause and press and hold
to add a two-second pause, and use the keypad to enter
any additional numbers if needed.
Tip: You can create pauses longer than two seconds by entering multiple twosecond pauses.
6.
Press Options  Save to store your changes.
Using Contacts
Dialing a Number from Contacts
Once you have stored phone numbers in Contacts, you can dial them
easily and quickly by either using their SIM card location number or by
using the Search field to locate the entry.
106
Finding a Contact Entry
You can store phone numbers and their corresponding names onto
your SIM card and phone’s onboard memory. The two locations are
physically separate but are used as a single entity, called the Contact
List.
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored may
differ.
1. In Idle mode, press Contacts  Contacts.
2.
Use the Up or Down Navigation key to locate a contact.
Tip: The Groups tab allows you to locate contacts by group. Use the Left or Right
Navigation key to move between Contacts and Groups.
3.
Press the
key or Options  Call to call the contact.
Contacts Entry Options
To access the Contacts options, follow these steps:
1. In Idle mode, press Contacts  Contacts.
1. Select an entry from the list and press the
2.
key.
Press Options and select from the following:
• Edit: allows you to make changes to the contact information.
• Call: allows you to call a currently selected entry.
• Send Message: allows you to send a message to the selected entry.
• Delete: delete the current contact entry from a target location such as
the Phone and/or S M card.
107
• Send Business Card via: allows you to send a business card to the
selected contact via Message or Bluetooth.
• Mark as Default Number: allows you to Change, Save, or Reset the
Default number and Message for a contact.
• More: allows you to Copy to FDN Contacts.
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own
phone number if you need to do so.
•
In Idle mode, press Contacts  Contacts Settings  Own
number.
FDN Mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers. When
this feature is enabled, you can make calls only to phone numbers
stored in the FDN list on the SIM card.
Note: FDN Mode must be set to On in the
 Settings  Phone  Security
 Set FDN Mode option before you can add, change, or delete contacts on
the FDN List.
Changing the FDN mode Status
1. In Idle mode, press
 Settings  Phone  Security.
2.
Scroll down to the Set FDN Mode field and press the
3.
Select On (to enable fixed dialing) or Off to disable the option
and press Save.
4.
Enter the PIN2 code and press Confirm.
108
key.
Important!: With Fixed Dial Mode enabled, you are NOT able to dial any number
other than those created as FDN numbers.
Creating New FDN Numbers
With the Fixed Dial mode On, follow these procedures:
1. In Idle mode, press Contacts  FDN Contacts.
2.
Press Options  Create FDN contacts.
3.
Enter your PIN2 password and press the
key.
Note: The PIN2 code is provided by your service provider.
4.
Press Name and use the keypad to enter a name for this FDN
contact.
5.
Press Phone Number and use the keypad to enter a contact
phone number for this FDN contact.
6.
Highlight the SIM card location field and use the keypad to enter
a location value for the entry on the SIM card.
7.
Press Options  Save to store the new FDN entry.
8.
Press
to return to Idle mode.
Group Settings
Creating New Group
1. In Idle mode, press Contacts  Groups.
2.
Press Options  Create group.
3.
Enter a name for this group in the New Group field and press
Save. For more information, refer to “Entering Text” on page 19.
109
4.
Press Options  Group Settings.
5.
Highlight the Picture field and press the
6.
Select an image and press Options  Select or the
key.
The selected image displays in the Picture field and displays the
name of the image to the right.
7.
Highlight the Ringtone field and press the
8.
Highlight an audio file and press Options  Select.
9.
Press Options  Save.
key.
key.
10. Press Back to return to Contacts or press
mode.
to return to Idle
Adding an Entry to a Group
1. In Idle mode, press Contacts  Groups.
2.
Highlight a group entry and press the
3.
Press Options  Add member.
key.
4.
Highlight a member from the list or highlight All and press
Check. A checkmark beside the name indicates adding this
person to the group.
5.
Press Add.
Removing an Entry From a Group
1. In Idle mode, press Contacts  Groups.
110
2.
Highlight a group entry and press the
3.
Press Options  Remove.
key.
4.
Highlight a member from the list or highlight All and press
Check. A checkmark beside the name indicates removing this
person from the group.
5.
Press the Remove soft key.
Renaming a Caller Group
1. In Idle mode, press Contacts  Groups.
2.
Highlight the group that you want to rename.
3.
Press Options  Rename.
4.
Backspace over the original name and use the keypad to enter a
new name for this group, then press Save.
Adding Speed Dial Entries
1. In Idle mode, press Contacts  Speed Dial List.
2.
Highlight a position (2-9) on the keypad in which to assign the
speed dial number and press Options  Assign.
3.
Select Address Book or FDN Contacts and press the
4.
Highlight the contact to assign to the speed dial location and
press Select or the
key.
The contact is automatically assigned to the speed dial location.
key.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned by
your service provider. These numbers may include emergency
numbers, customer service numbers, and directory inquiries.
1. In Idle mode, press Contacts  Service Numbers.
111
2.
Scroll through the numbers by using the Up or Down Navigation
key.
3.
Press
to dial the selected number.
Managing Contact Entries
You can copy, delete, and view the memory status for the Phone and
SIM entries on your phone.
Copying an Entry to the SIM Card
Note: When storing a contact entry into the SIM card, note that only the name,
phone number, group, and slot location are initially offered as fields (some
SIM cards may allow an address as well). To save additional information for a
particular contact, such as other phone numbers, or e-mail, it is important to
add new fields to that Contact information. It is also important to note that if
you move the SIM card to another phone that does not support additional
fields on the SIM card, this additional information may not be available.
1. In Idle mode, press Contacts  S M Management  Copy
Contacts to SIM.
2.
Highlight a member from the list or highlight All and press
Check.
3.
Press Copy.
Important!: When copying from the Phone to the SIM card some information may
be lost.
112
4.
At the Continue? prompt, press Yes to copy the contact(s), or No
to cancel.
5.
Press
to return to Idle mode.
Copying an Entry to the Phone
1. In Idle mode, press Contacts  SIM Management  Copy
Contacts from S M. The phone displays a list of your current
contacts stored on the SIM card.
Note: If the entry’s associated Group image has a SIM location icon on it, then the
entry exists on the SIM card. This is the type you can duplicate. If the entry’s
associated Group image does not have a SIM location icon, then this entry
currently exists on the phone.
2.
Highlight a member from the list and press Check.
3.
Repeat Step 2 for each entry you want to copy to the Phone or
highlight All and press the
key to place a checkmark
alongside all entries.
4.
Press Copy.
5.
Press
to return to Idle mode.
Deleting a Contact Entry
You can delete a Phone or SIM entry from your phone’s memory.
Deleting an entry from the Phone
1. In Idle mode, press Contacts  Contacts.
2.
Highlight a contact to delete and press Options  Delete 
Selected or press the
key and press Options  Delete.
3.
At the Delete Contact? prompt, press Yes to delete the contact,
or No to cancel.
4.
Press
to return to Idle mode.
113
Deleting all entries from the SIM
1. In Idle mode, press Contacts  S M Management  Delete
Contacts from SIM.
2.
Highlight a member from the list or highlight All and press
to create a checkmark.
3.
Press Delete.
4.
At the prompt, press Yes to delete the contact, or No to cancel.
5.
Press
to return to Idle mode.
Note: Entries in the FDN Contacts list must be deleted from within the FDN
Contacts list
114
Section 14: Changing Your Settings
This section includes tips on how to use your phone’s features, as well
as how to change and customize the display settings, call handling,
security settings, and other settings associated with your phone.
Sound Profile
The Sound Profile menu allows you to specify how you are informed of
incoming calls and messages as well as other notification sounds your
phone can make.
The steps for modifying the Normal sound profile are described in
detail. You can apply similar steps to modify the other sound profiles:
Silent, Driving and Outdoor.
Selecting a Profile
1. In Idle mode, select
2.
 Settings  Sound Profile.
Highlight a profile type and press Select. The selected profile
activates. Choices include:
• Normal: default sound profile for normal use. You can modify
Normal settings for Call, Message and Phone.
• Silent: allows you to select mute or vibrate alerts only and stop
the phone from making any sound, in a theater for example.
You can modify Silent settings for Call, Message and Phone.
• Driving: allows you to select alerts that you can hear easily
while driving. You can modify Driving settings for Call,
Message and Phone.
• Outdoor: allows you to select alerts that you can hear in
outdoor conditions by adjusting the volume, vibration and
115
tones. You can modify Outdoor settings for Call, Message and
Phone.
Editing the Normal - Call Profile
1. In Idle mode, select OK  Settings  Sound Profile
2.
Highlight Normal and press Edit
3.
Highlight the Call tab.
4.
Highlight Call Alert Type and press
5.
6.
Select one of the following and press OK:
• Melody: the phone rings using the ring melody selected in the Call
Ringtone menu.
• Vibration: the phone vibrates.
• Vibration then Melody: the phone vibrates then plays the selected
melody.
• Vibration & Melody: the phone vibrates and plays the melody
simultaneously.
Highlight Ringtone and press
.
7.
Select one of the listed tones and press
8.
The tone will play. Press the Add soft key to add the tone.
9.
Highlight Ringtone Volume and press
.
.
.
10. Use the left or right navigation key to adjust the volume level
(range is 1-7) and press OK.
11. Press Save to save your selections and return to the Sound
Profile menu.
Editing the Normal - Message Profile
1. In Idle mode, select
116
 Settings  Sound Profile
2.
Highlight Normal and press Edit
3.
Highlight the Message tab.
4.
Highlight Message Alert Type and press
5.
Select one of the following:
• Melody: the phone rings using the ring melody selected in the
Message Alert Tone menu.
• Vibration: the phone vibrates.
• Vibration & Melody: the phone vibrates and plays the selected melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
Highlight Message Alert Tone and press
.
6.
.
7.
Select one of the message tones and press Select. Press Play if
you want to listen to it first.
8.
Highlight Message Alert Repetition and press
9.
Select one of the following and press OK.
• Once: repeats the message alert once.
• Periodic: repeats the message alert periodically.
10. Highlight Message Tone volume and press
.
11. Use the Left or Right navigation key to adjust the volume level
(range is 1-7) and press OK.
12. Press Save to return to the Sound Profile menu.
Editing the Normal - Phone Profile
1. In Idle mode, select
2.
 Settings  Sound Profile
Highlight Normal and press Edit
117
3.
Highlight the Phone tab.
4.
Highlight Keypad Tone and press
following tones and press OK:
• Beep
• Lucid
• Mute
Highlight Power On Type and press
5.
6.
7.
8.
9.
. Select one of the
.
Select one of the following and press OK:
• Melody: the phone rings using a pre-set melody.
• Vibration: the phone vibrates.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
Highlight Power Off Type and press
.
Select one of the following and press OK:
• Melody: the phone rings using a pre-set ring melody.
• Vibration: the phone vibrates but does not ring.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
• Mute: the phone is silent and does not play a melody or vibrate.
Highlight Phone Sound Volume and press
.
10. Use the Left or Right navigation key to adjust the volume level
(range is 0-7) and press OK.
11. Press Save to return to the Sound Profile menu.
118
Display
In this menu, you can change various settings for the display.
1. In Idle mode, press
 Settings  Display.
1. The following options are available:
• Main Display
• Front Display
• Light Settings
2. Select an option, then press the
key to access
the following:
Main Display
• Wallpaper: allows you to select Pictures or None. None leaves the wallpaper
blank. Press the Edit soft key, and scroll through the graphics in your
Pictures folder (on the Phone or on the Memory card) to select your
wallpaper. Press the Select soft key or the
key to confirm the selection.
• My Theme: lets you select a theme for the main display (Theme 1, Theme 2
or Theme 3).
• Menu Style: allows you to select whether the phone’s menus are presented
in either a Grid Menu style or List Menu style. Make a selection and press the
Select soft key or the
key.
• Dialing Display: allows you to select display properties:
– Font Type: allows you to select the font to display. Press the Left or Right
Navigation keys to make your selection. Choose from Normal 1 or Normal
key to confirm your selection.
2. Press the Save soft key or the
– Font Size: allows you to select a size for the selected font. Press the Left
or Right Navigation keys to make your selection. Choose from Large,
119
Medium, or Small. Press the Save soft key or the
key to confirm your
selection.
– Font Color: allows you to select a colour for the selected font. Press the
Left or Right Navigation keys to make your selection. Choose from
Monochrome, Gradation, or Basic. Press the Down Navigation key and
select a colour choice. Press the Save soft key or the
key to confirm
your selection.
– Background Color: allows you to select a colour for the background
screen. Press the Left or Right Navigation keys to make your selection.
Press the Save soft key or the
key to confirm your selection.
• Greeting Message: allows you to enter text to display on the screen when
the phone powers on.
Front Display
• Wallpaper: allows you to select from Clock, My image, or Screen slogan.
– To set the Clock style, highlight the Clock option, then press the Edit soft
key. Use the Left or Right Navigation keys to access the options of Digital
clock 1, Digital clock 2, Analogue clock 1, and Analogue clock 2. Press the
Save soft key or the
key to confirm your selection.
– To set a Picture as wallpaper, highlight the My Image option, then press
the Edit soft key. Press the Change soft key, and scroll through the
graphics in your Media Pictures folder to select your wallpaper. Use the
soft keys to zoom in or out and the Navigation keys to center the desired
portion of the graphic in the window. Press the
key, then press
Options  Set or the
key to confirm your selection.
– To set a Screen Slogan, highlight the Screen Slogan option, and press
the Edit soft key. The text box activates and displays the default slogan.
Use the
key to delete the default slogan, then use the text entry
120
options and the keypad to enter your slogan. Press the Save soft key or
the
key to confirm your selection.
• Greeting Message: allows you to enter the text to display on the screen
when the phone powers on.
Light Settings
Note: Light settings can affect the length of time before battery recharge is
necessary.
• Brightness: allows you to adjust the display brightness for the LCD to see it
better in different lighting conditions. Press the Left or Right Navigation keys
to adjust the brightness. Press the Save soft key or the
key to confirm
your selection.
• Backlight Time: allows you to select the amount of time for the backlight to
remain on and the length of time to remain on but dimmed. Highlight the On
field, press the Edit soft key then use the Up or Down Navigation keys to
select from 10 Seconds, 30 Seconds, 1 Minute, 3 Minutes, or 10 Minutes.
For Dim, choose Off, 5 Seconds, 30 Seconds, 1 Minute, or 3 Minutes.
Press the OK soft key or the
key to confirm your selection, then press
the Save soft key.
Time and Date
This menu allows you to change the current time and date displayed.
1. In Idle mode, select
 Settings  Time and Date  Time
Zone Updating.
2.
Press the Left or Right Navigation key to select from one of the
following:
121
• Manual only: you need to manually set the time zone, time and date.
• Prompt first: you are prompted before a time change is applied.
• Automatic: the phone automatically updates the time and date
according to the current time zone using the network service.
Important!: Current time zones are based upon Greenwich Mean Time.
To manually set the time zone, time and date:
1. Highlight the Time Zone field and press
.
2.
Use the Left or Right Navigation key to locate a time zone. A
corresponding area of the world map displays.
3.
If Daylight Saving time applies, highlight the Daylight saving
checkbox and press Check then press OK.
4.
Select the Time field and enter the time in the following format:
HH:MM. Highlight AM/PM and use the right navigation key to
toggle the setting.
5.
Highlight the Date field and enter the date in the following format:
MM/DD/YYYY. Use the left and right navigation keys to move
between settings.
6.
Select the Time Format field and press the Left or Right
Navigation key to select the 12hr or 24hr format.
7.
Select the Date Format field and press the Left or Right
Navigation key to select a format.
8.
Press Save to save your settings.
122
Phone Settings
You can customize various phone settings.
•
In Idle mode, select
 Settings  Phone.
Language
This menu allows you to select a display language for Text language
and Text Input mode.
1. In Idle mode, select
 Settings  Phone  Language.
2.
Highlight Screen text and press
3.
Highlight one of the following selections and press OK:
• Automatic (uses the language set on your SIM card).
• English
• Français
Highlight the Input Language field and press
.
4.
5.
6.
.
Highlight one of the following selections and press OK:
• English
• Français
Press Save to save your settings and return to Phone settings
page.
Shortcuts
The Shortcuts option allows you to change the applications assigned
to your Navigation keys.
1. In Idle mode, select
 Settings  Phone  Shortcuts.
123
2.
Use the Navigation keys to select the Up, Down, Right, or Left
key.
3.
Press Options  Change. Highlight a new application to assign
to the previously selected key.
4.
Press the Save soft key or the
application.
5.
Follow the above steps for all four Navigation keys.
key to assign the new
Own Number
The Own Number option displays the phone number(s) programmed
into the SIM card in the phone.
1. In Idle mode, select
 Settings  Phone  Own Number.
2.
Highlight a number field and press
3.
Press Back to return to the previous screen.
to view the number.
Security
The Security feature enables you to restrict the use of your phone by
the others and to restrict the types of calls. Various codes and
passwords are used to protect the features of your phone.
1. In Idle mode, select
 Settings  Phone  Security.
The following options are available:
Lock Phone
When the Lock Phone feature is enabled, the phone is locked and you
must enter the 4- to 8-digit phone password each time the phone is
powered on.
124
Note: You are prompted to create a password the first time this feature is enabled.
To change the phone password, see “Change Phone Password” on
page 127. Once you enter the correct password, you can use the
phone until you switch it off. The following options are available:
– Off: you are not asked to enter the phone password when you switch on the
phone.
– On: you are required to enter the phone password when you switch on the
phone.
Lock SIM Card
When the Lock SIM Card feature is enabled, your phone only works
with the current SIM. You must enter the SIM password to unlock the
SIM so you can use a different SIM card. Once you enter the SIM
password, you are asked to confirm your password. Reenter your
password and press the Confirm soft key.
Note: This SIM password is typically the last four digits of the current phone
number. You can obtain a SIM password from a customer service
representative.
Check PIN Code
• When the Check PIN Code feature is enabled, you must enter the PIN for
your SIM card each time you switch on the phone. Consequently, any person
who does not have your PIN cannot use your SIM without your approval.
The following options are available:
– Off: the phone connects directly to the network when you switch
it on.
– On: you must enter the PIN each time the phone is switched on.
125
Note: Before disabling the Check PIN Code feature, you must enter your PIN. You
can obtain your PIN from a customer service representative.
Lock Applications
Using this option you can lock various applications. Once you lock the
contents, you must enter the phone’s password to access the
associated menus.
Note: The first time you access the password screen, you are prompted to create a
password.
The applications options are:
– All
– Messaging
– Recent Calls
– My Downloads
– Calendar
– Tasks
– Memo
– Contacts
Set FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows
you to restrict the outgoing calls to a limited set of phone numbers. The
following options are available:
– On: you can only call phone numbers stored in the FDN contacts list. You
must enter your PIN2. The following options for entering FDN contacts are
available through Contacts:
• Full length entries or wild cards can be entered in to the FDN list.
126
• A full length number with a specific contact name can be entered into
the FDN list.
• Wildcard entries allow you to dial a range of number with a single
entry: ex. 555 – All dialed numbers that begin with 555 are allowed.
Numbers that do not match the conditions in the FDN list are restricted.
– Off: you can call any number.
Note: Entering an asterisk (*) is not required for wild card entries.
Change Phone Password
This option allows you to change your current phone password to a
new one. Once you enter a new password, you are asked to confirm it
by entering it again.
Change PIN Code
This option allows you to change your current PIN, provided that the
Check PIN Code feature is enabled. You must enter the current PIN
before you can specify a new one. Once you enter a new PIN, you are
asked to confirm it by entering it again.
Change PIN2 Code
The Change PIN2 option allows you to change your current PIN2 to a
new one. You must enter the current PIN2 before you can specify a
new one. Once you enter a new PIN2, you are asked to confirm it by
entering it again.
Note: If your SIM card does not require a PIN2 password, this menu does not
display.
127
Reset Phone
You can easily reset your phone to its default settings. To reset your
phone:
1. In Idle mode, select
 Settings  Phone  Reset Phone.
2.
At the All Settings reset to factory defaults. Continue? prompt,
press Yes to reset, or No to cancel.
3.
Enter your phone password, and press the Confirm soft key.
4.
After the phone settings are reset, the Reset Phone done
confirmation displays.
Once your phone has been reset to its default settings, it will
restart itself in order to incorporate the new settings.
Note: User Data such as contacts, messages, pictures, videos, and music is not
deleted.
Restore Phone
The Restore Phone option resets all settings to factory default values,
the same as the Reset Phone option described above, however it also
deletes all user data.
Warning!: All User Data such as contacts, messages, pictures, videos, and music is
deleted. Ensure that you remove your microSD card if you want to
preserve data stored on it or it will also be erased during the Restore
Phone option.
128
Warning!: When performing the Restore Phone option, do not remove your battery
until the phone completes the task and restarts, otherwise phone
damage may occur.
Airplane Mode
Airplane Mode allows you to use many of your phone’s features, such
as Calendar, Games, Voice notes, etc., when you are in an area where
making or receiving calls or data transmission is prohibited. When your
phone is in Airplane Mode, it cannot send or receive any calls or
access online information. When active, the (
) icon displays in
place of the signal strength indicator.
1. In Idle mode, select
 Settings  Phone  Airplane
mode.
2.
Select On or Off and press Save or the
key.
T-Coil Mode
T-Coil mode allows you to use a hearing aid with a T-coil setting in
connection with the handset. You can set this mode to Enable or
Disable. When T-Coil Mode is activated, the icon displays on the Idle
screen.
1. In Idle mode, select
2.
 Settings  Phone  T-Coil mode.
Select Enable or Disable and press Save or the
key.
Press the Yes soft key when the T-Coil confirmation displays.
129
Call Settings
•
In Idle mode, select
 Settings  Calls.
Adjusting the General Call Settings
1. Press General and select from the following options:
2.
• Show My Number: allows you to show or hide your number on the
caller display of the phones you call. Select Set by Network, Show
Number, or Hide Number.
• Auto Reject: selects numbers that are automatically sent to voicemail
based on a user-created Reject List.
• Call Answer: selects how incoming calls can be answered. Selections
are: Send Key, Open flip and Any Key.
• Auto Reply: allows you to automatically send a text message to a
missed call number. Set to On and enter the reply that you want to
send.
• Call Status Tones: allows you to activate an alert tone for one of two
available status categories. Press an option to make your selection
and then press Options  Save to store your new selection. Options
include:
– Call Connect Tone: allows you to activate an alert tone which sounds
every time a call is connected.
– Minute Minder: allows you to activate an alert tone which sounds every
minute the call is active.
• Alerts on Call: activates an alert tone for new messages being
received during an active call. Press Save to store setting.
Press Back twice return to the previous Settings page.
Adjusting the Voice Call Settings
1. Select Voice Call and choose from the following options:
130
2.
• Call Forwarding: incoming calls are re-routed to a secondary number
that you specify. Select the condition for the call forward action:
– Always activates an automatic forward of all incoming calls regardless of
condition.
– Busy activates an forward function only when your number is currently in
use and the caller receives a busy signal.
– No Reply activates an automatic forward of all incoming calls after a preset
amount of time (5 seconds - 30 seconds).
– Unreachable activates an automatic forward of all incoming calls only
when you can not be reached and your phone status is set to unreachable.
– Cancel All cancels all call forwarding functions.
• Call Waiting: this network service informs you when someone is trying
to reach you during another call. You can specify individual call waiting
options for voice calls and/or data calls.
– Press Options and select one of the following options: Activate,
Deactivate, or Check status (checks the status of this service on your
account).
• Auto Redial: the phone automatically redials the last active number if
the call was either cut off or you were unable to connect.
– Press either On or Off to activate/deactivate the function.
– Press Save to store the new setting.
Press Back twice return to the previous Phone settings page.
Connectivity
You can edit several of the communication/connection parameters on
this phone.
•
In Idle mode, select
 Settings  Connectivity.
131
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30 feet
without requiring a physical connection. Unlike infrared, you don't need
to line up the devices to beam information with Bluetooth. If the
devices are within connectivity range of one another, you can
exchange information between them, even if they are located in
different rooms.
The Bluetooth wireless technology settings menu provides the ability to
view and change the device name, show the visibility, and set the
security for the device.
Bluetooth Activation
To use the Bluetooth option you must first activate it. When Bluetooth
is deactivated, you cannot send or receive information via Bluetooth.
To save battery life or in situations where Bluetooth use is prohibited,
you can turn off the Bluetooth signal.
1. In Idle mode, press
 Settings  Connectivity 
Bluetooth.
2.
If the first item in the Bluetooth menu is Bluetooth:Off, highlight
the Bluetooth:Off option press the Select soft key or the
key.
The Bluetooth activated confirmation prompt displays on your
phone.
Note: If the first item in the Bluetooth menu is Bluetooth:On, then Bluetooth is
already activated.
132
Discoverable
The Discoverable option allows your phone to wirelessly transmit its
phone name and status to every device within its range. This
transmission can pose a security risk and allow unauthorized
connection to your phone. It is recommended that you remain hidden
whenever possible.
1. In Idle mode, press
 Settings  Connectivity
Bluetooth.
2.
If the second item in the Bluetooth menu is Discoverable:Off,
then highlight the Discoverable:Off option and press the Select
soft key or the
key.
The Visibility enabled confirmation prompt displays on your
phone.
Note: If the second item in the Bluetooth menu is Discoverable:On, then Bluetooth
is already discoverable.
My Devices
The My Devices option provides a list of Bluetooth wireless technology
devices discovered by your handset.
1. In Idle mode, press
 Settings  Connectivity 
Bluetooth  My Devices.
2.
Highlight Search for New Device and press the Select soft key
or the
key.
3.
Highlight a device and press the Select soft key or the
key.
133
4.
Enter the passkey (if applicable).
If connecting to a Bluetooth wireless device, consult your
Bluetooth device user manual for your assigned PIN.
If connecting to another handset, enter the same user-defined
PIN on both handsets.
5.
Press Options  Settings, highlight the Connection Options
field and use the Left or Right Navigation key to select Automatic
(reconnects automatically), or Always Ask (asks before
reconnecting) and press the Save soft key.
Note: The first time you try to pair with a handset, you and the owner of the other
handset must enter the same Passkey. Once the handsets are paired, you do
not need to use the Passkey again.
6.
If you are unable to pair with the device a popup displays on the
screen. Press the Yes soft key to retry.
My Bluetooth Info
The My Bluetooth Info feature allows your phone to identify itself using
the Device Name, the Device Address and Hardware and Software
Version when your phone’s Bluetooth visibility is turned On.
The Device Name can be altered by selecting the pre-existing text and
replacing it with a new string.
1. In Idle mode, press
 Settings  Connectivity 
Bluetooth  My Bluetooth Info.
2.
134
Press the
key to erase the previous Device Name.
Note: The default input entry method is Abc, where the initial character is
Uppercase and each consecutive character in that same word is left as
lowercase text.
3.
Press Options  Save when you are finished.
Remote SIM Mode
In Remote SIM mode, you can make or answer calls only with a
connected Bluetooth hands-free car kit via the SIM card on your
phone.
To activate Remote SIM mode:
1. In Idle mode, press
 Settings  Connectivity 
Bluetooth  My Bluetooth Info.
2.
Select Remote SIM mode and press the left or right navigation
key to toggle the setting to On.
To use Remote SIM mode, start the Bluetooth connection from a
Bluetooth hands-free car kit.
Search for New Device
This option allows you to search for new Bluetooth devices.
1. In Idle mode, press
 Settings  Connectivity
Bluetooth  Search for New Device. The phone searches for
available devices.
2.
Highlight a device and press the Select soft key or the
3.
Enter the passkey.
4.
Select a connection option and press the Pair soft key.
key.
135
Network Selection
Lets you choose Automatic or Manual network selection. If you
choose Manual, highlight the desired network and press the Select
soft key or the
key.
Configuring Your Phone’s USB Settings
This menu selects the method of communication for the USB port.
Note: Disable the Bluetooth feature before initiating a USB connection with the
phone. Prior to connecting the USB cable to the phone, install the latest
version of the PC Studio application. This application installs the necessary
USB drivers onto your machine.
1. In Idle mode, select
 Settings  Connectivity  Select
USB mode.
2.
3.
136
Select one of the following USB modes:
• Ask on Connection: causes the phone to present a “Select USB
Mode” pop-up when you connect to the PC. You can choose from
either: Samsung PC Studio, Media Player, or Mass Storage.
• Samsung PC Studio: sets PC Studio to launch as the default
application when a USB connection is detected.
• Media Player: sets the Media Player to launch as the default
application when a USB connection is detected.
• Mass storage: allows you to utilize the onboard storage capacity of the
phone’s microSD card to store and upload files. This option allows
your computer to detect the phone’s microSD card as a removable
storage drive.
Press Save.
Network Profile Configuration
Configuring your Network Profiles
Your phone is wirelessly connecting to the Internet via a built in WAP
browser.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although you can
change the active connection, please ask your local retailer or
customer service representative to assist.
1. In Idle mode, press
 Settings  Connectivity 
Network profiles.
2.
Highlight one of the following options and press the View soft
key.
• <Service provider> Internet
• <Service provider> MMS
– or –
Press Options  Create, and press the Select soft key or the
key to create a new connection.
Note: Web, MMS and Streaming settings are pre-configured and cannot be altered
on this screen. Your phone is set up by default for connecting to the network.
3.
Select one of the following parameters to edit. They may or may
not appear depending on the Network Profile that was selected:
• Set name: enter a profile name.
• Access name: edit the access point name.
137
• Auth type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to
the network.
• Protocol: set the connection protocol used by the WAP browser: WAP,
HTTP, or Other.
• Home URL: enter the URL address of the page to use as
your homepage.
• Proxy Address: This option only appears when the Protocol is set to
HTTP.
• Gateway Address: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
• Secure connection: Select On or Off depending on whether or not
you have a secure connection. This option only appears when the
Protocol is set to WAP.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
• Advanced: allows you to configure some of the IP-specific information:
Static IP, Static DNS, Server information, and Traffic Class. Highlight
this option and press the Edit soft key to access the following options:
– Static P: specify if you want to manually enter an IP address. Remove the
check mark if you want the server to automatically assign the IP address.
– Local Phone P: allows you to configure the local phone IP address.
– Static DNS: specify if you want to manually enter the Domain Name Server
(DNS) address. Remove the check mark if you want the server to
automatically assign the address.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
138
– Traffic class: select the traffic class, press the Edit soft key, select a Traffic
Class (Subscribed, Conversation, Streaming, Interactive, or Background)
and press the OK soft key.
Applications Settings
The Applications Settings feature allows you to configure the functional
parameters for most of the onboard applications. These applications
are described in more detail within other sections of this manual.
1. In Idle mode, select
 Settings  Applications Settings.
2.
Select the type of application which you want to change:
• Messaging Settings (see page 43)
• Browser Settings (see page 139)
• Music Player Settings (see page 140)
• Record Audio Settings (see page 141)
• Calendar Settings (see page 141)
• Contacts Settings (see page 102).
Browser Settings
These browser settings are for your onboard browser which can be
 Browser.
accessed from
For setting information on your Mobile Web browser, see “Browser
Settings” on page 56.
1. In Idle mode, select
 Settings  Applications Settings
 Browser Settings.
2.
Select one of the following options:
139
• Clear Caches: deletes the information stored in the cache. The cache
stores the most recently accessed web pages.
• Cookies:
– Empty Cookies: deletes cookies. Cookies are pieces of personal
information sent to a web server while navigating the web.
– Cookie Options: sets whether cookies are stored on your phone (Accept
All or Reject All). If you select Prompt, the phone will ask you to save the
cookies on every page requiring cookies.
• Preferences: allows you to run JavaScript, display images, play sound,
or run Flash. Uncheck these items to speed up web-viewing on your
phone.
• Browser Profiles: allows you to set the current browser profile. For
more information, refer to “Browser profiles” on page 57.
• About Browser: displays the access version and copyright information
about the browser.
Music Player Settings
To configure your Music Player settings, use the following steps:
1. In Idle mode, select
 Settings  Applications Settings
 Music Player Settings.
2.
3.
140
Select one of the following options:
• Background Playing: allows you to set whether or not you can listen
to music while working in other applications.
• Sound Effects: allows you to set the Equalizer to Normal, Rock, Pop,
Dance, Classic, Jazz, Wide, Dynamic, or Surround.
After making any changes, press the Save soft key.
Record Audio Settings
To configure the maximum length for a recording:
1. In Idle mode, select
 Settings  Applications Settings
 Record Audio Settings.
2.
3.
Select one of the following options:
• Output format: allows you to set the format of saved audio files (amr or
mp3)
• Save output to: lets you choose the default storage location for
recorded audio files (Phone or Memory Card).
• Unlimited recording: turn on or off.
Press Save.
Calendar Settings
To configure the starting day and view used when opening the
Calendar application:
1. In Idle mode, select
 Settings  Applications Settings
 Calendar Settings.
2.
3.
Press either of the following fields and edit the information:
• Starting Day: allows you choose which day marks the first day in your
calendar week (Sunday or Monday).
• View By: allows you to choose the default view for appointments used
by the Calendar application when launched (Month, Week, or Day).
Press
to save.
141
Contact Settings
For information on Contact Settings, see see “Contact Settings” on
page 102.
Memory Management
You can easily check the amount of memory being used for storing
data, such as messages, media, calendar data, or contacts entries. You
can also delete any selected information from your phone:
1. In Idle mode, select
 Settings  Memory Management.
2.
Press either of the following options:
• Clear Memory
• Used Space
Clear Phone Memory
From this menu you can clear the memory for Files, Messages,
Contact entries, Calendar entries, Tasks, or Memos. You can also
clear everything listed.
1. In Idle mode, select
 Settings  Memory Management 
Clear Memory.
2.
Press Check to place a checkmark alongside those applications
you wish to clear.
– or –
Check All to clear all the memory settings.
3.
142
Press OK.
4.
Enter the user-defined password and press Confirm to clear the
memory settings. For more information, refer to “Change Phone
Password” on page 127.
– or –
Press Back to cancel.
Check the Used Space
1. In Idle mode, select
 Settings  Memory Management 
Used Space.
2.
3.
Select one of the following storage categories to view the
contents of a category’s memory:
• Shared Memory
• Messaging
• My Downloads
• Calendar
• Tasks
• Memo
• Contacts
Press
to return to the Idle screen.
143
Section 15: Health and Safety Information
Safety Warnings
Keep phone from children and pets
Keep your phone and all accessories out of the reach of small children
or animals. Small parts may cause choking or serious injury if
swallowed. Children could also damage the phone, dial 911 by mistake
or make calls that increase your phone bill.
Protect your hearing
Excessive exposure to sound at high volume can cause hearing
damage. Always turn the volume down before plugging in the
earphones and use only the minimum volume setting necessary to
hear your conversation or music.
Install mobile devices and equipment with caution
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted. Avoid placing your phone and
accessories near or in an air bag deployment area. Improperly
installed wireless equipment can cause serious injury when air bags
inflate rapidly.
Handle and dispose of batteries and chargers with care
Use only Samsung-approved batteries and chargers specifically
designed for your phone. Incompatible batteries and chargers can
cause serious injuries or damage to your phone.
144
Never dispose of batteries or phones in a fire. Follow all local
regulations when disposing used batteries or phones.
Never place batteries or phones on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may explode when
overheated.
Never crush or puncture the battery. Avoid exposing the battery to high
external pressure, which can lead to an internal short circuit and
overheating.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches) between mobile phones and
pacemakers to avoid potential interference, as recommended by
manufacturers and the independent research group, Wireless
Technology Research. If you have any reason to suspect that your
phone is interfering with a pacemaker or other medical device, turn off
the phone immediately and contact the manufacturer of the pacemaker
or medical device for guidance.
Turn off the phone in potentially explosive environments
Do not use your phone at refuelling points (service stations) or near
fuels or chemicals. Turn off your phone whenever directed by warning
signs or instructions. Your phone could cause explosions or fire in and
around fuel or chemical storage and transfer areas or blasting areas.
Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the phone, its parts, or accessories.
145
Turn off the phone in thunderstorms
Do not use your phone during a thunderstorm. Your phone may
malfunction and your risk of electric shock is increased.
Warning regarding display
The display on your handset is made of glass or acrylic and can break
if your handset is dropped or if it receives significant impact. Do not
use if screen is broken or cracked as this could cause injury.
Safety Precautions
Drive safely at all times
Avoid using your phone while driving and obey all regulations that
restrict the use of mobile phones while driving. Use hands-free
accessories to increase your safety when possible.
Follow all safety warnings and regulations
Comply with any regulations that restrict the use of a mobile phone in a
certain area.
Use only Samsung-approved accessories
Using incompatible accessories may damage your phone or cause
injury.
Turn off the phone near medical equipment
Your phone can interfere with medical equipment in hospitals or health
care facilities. Follow all regulations, posted warnings, and directions
from medical personnel.
146
Turn off the phone or disable the wireless functions when in an
aircraft
Your phone can cause interference with aircraft equipment. Follow all
airline regulations and turn off your phone or switch to a mode that
disables the wireless functions when directed by airline personnel.
Avoid interference with other electronic devices
Your phone emits radio frequency (RF) signals that may interfere with
unshielded or improperly shielded electronic equipment, such as
pacemakers, hearing aids, medical devices, and other electronic
devices in homes or vehicles. Consult the manufacturers of your
electronic devices to solve any interference problems you experience.
Protect batteries and chargers from damage
• Avoid exposing batteries to very cold or very hot temperatures (below
0 C/32 F or above 45 C/113 F). Extreme temperatures can
reduce the charging capacity and life of your batteries.
• Prevent batteries from contacting metal objects, as this can create a
connection between the + and - terminals of your batteries and lead
to temporary or permanent battery damage.
• Never use a damaged charger or battery.
Handle your phone carefully and sensibly
• Do not disassemble your phone due to a risk of electric shock.
• Do not allow your phone to get wet—liquids can cause serious
damage and will change the colour of the label that indicates water
damage inside the phone. Do not handle your phone with wet hands.
Water damage to your phone can void your manufacturer’s warranty.
147
• Avoid using or storing your phone in dusty, dirty areas to prevent
damage to moving parts.
• Your phone is a complex electronic device—protect it from impacts
and rough handling to avoid serious damage.
• Do not paint your phone, as paint can clog moving parts and prevent
proper operation.
• Your phone may be damaged by exposure to magnetic fields. Do not
use carrying cases or accessories with magnetic closures or allow
your phone to come in contact with magnetic fields for extended
periods of time.
Reduce the risk of repetitive motion injuries
While using your phone, hold it with a relaxed grip, press the keys
lightly, use special features that reduce the number of keys you have to
press (such as templates and predictive text), and take frequent
breaks.
Warranty Disclaimer: Proper use of a touch screen
handset
If your handset has a touchscreen display, please note that a
touchscreen responds best to a light touch from the pad of your finger
or a non-metallic stylus. Using excessive force or a metallic object
when pressing on the touchscreen may damage the tempered glass
surface and void the warranty. For more information, please refer to
“Warranty Information” on page 161.
148
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions per UL
guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT
IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL
OR HORIZONTAL OR FLOOR MOUNT POSITION.
Important usage information
Signal Strength
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal. If you’re inside
a building, being near a window may give you better reception.
149
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls the
power level.
Allow only qualified personnel to service your phone
Allowing unqualified personnel to service your phone may result in
damage to your phone and will void your warranty.
Ensure maximum battery and charger life
• Avoid charging batteries for more than a week, as overcharging may
shorten battery life.
• Over time, unused batteries will discharge and must be recharged
before use.
• Disconnect chargers from power sources when not in use.
• Use batteries only for their intended purpose.
Handle SIM and memory cards with care
• Do not remove a card while the phone is transferring or accessing
information, as this could result in loss of data and/or damage to the
card or phone.
• Protect cards from strong shocks, static electricity, and electrical
noise from other devices.
• Frequent writing and erasing will shorten the life span of memory
cards.
• Do not touch gold-coloured contacts or terminals with your fingers or
metal objects. If dirty, wipe the card with a soft cloth.
150
Ensure access to emergency services
Emergency calls from your phone may not be possible in some areas
or circumstances. Before travelling in remote or undeveloped areas,
plan an alternate method of contacting emergency services personnel.
Correct disposal of this product
The product and its electronic accessories (e.g., charger, headset,
USB cable) should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Correct disposal of batteries in this product
The batteries in this product should not be disposed of with other
household waste at the end of their working life.
Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above reference levels. If
batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This phone is compliant with RoHS.
151
Radio frequency safety
The design of your phone complies with updated NCRP standards
described below. In 1991-92, the Institute of Electrical and Electronics
Engineers (IEEE) and the American National Standards Institute
(ANSI) joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120 scientists,
engineers and physicians from universities, government health
agencies and industries developed this updated standard after
reviewing the available body of research. In 1993, the Federal
Communications Commission (FCC) adopted this updated standard in
a regulation. In August 1996, the FCC adopted hybrid standard
consisting of the existing ANSI/IEEE standard and the guidelines
published by the National Council of Radiation Protection and
Measurements (NCRP).
Acknowledging special precautions and Industry Canada
notice
This equipment has been tested and found to comply with the limits of
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
152
However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient / relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
Specific Absorption Rates (SAR)
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how much
RF the phone emits. All phone models are tested at their highest value
in strict laboratory settings. But when in operation, the SAR of a phone
can be substantially less than the level reported to the FCC. This is
because of a variety of factors including its proximity to a base station
antenna, phone design and other factors. What is important to
remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the public.
153
Maximum measured SAR values for the C414M are:
• GSM 850: Head 0.15 W/kg, Body-worn 0.52 W/kg
• GSM 1900: Head 0.36 W/kg, Body-worn 0.50 W/kg
• UMTS V: Head 0.12 W/kg, Body-worn 0.24 W/kg
• UMTS II: Head 0.52 W/kg, Body-worn 0.35 W/kg
154
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG ELECTRONICS
CANADA INC. (SAMSUNG) warrants to the original purchaser
(“Purchaser”) that SAMSUNG’s Phones and accessories (“Products”)
are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase and
continuing for the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use
of Product by Purchaser. This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, neglect, unusual
physical, electrical or electromechanical stress, or defects in appearance,
cosmetic, decorative or structural items, including framing, and any nonoperative parts unless caused by SAMSUNG; (b) defects or damage resulting
from excessive force or use of a metallic object when pressing on a touch
screen; (c) equipment that has the serial number or the enhancement data
code removed, defaced, damaged, altered or made illegible; (d) any plastic
surfaces or other externally exposed parts that are scratched or damaged due
155
to normal use; (e) malfunctions resulting from the use of Product in conjunction
or connection with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (f) defects or damage from improper
testing, operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage from external
causes such as collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake, or from exposure to weather conditions, or
battery leakage, theft, blown fuse, or improper use of any electrical source; (h)
defects or damage caused by cellular signal reception or transmission, or
viruses or other software problems introduced into the Product; (j) any other
acts which are not the fault of SAMSUNG; or (i) Product used or purchased
outside the United States or Canada.
This Limited Warranty covers batteries only if battery capacity falls below 80%
of rated capacity or the battery leaks, and this Limited Warranty does not cover
any battery if (i) the battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG phone for which
it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,
without charge to Purchaser, any defective component part of Product.
To obtain service under this Limited Warranty, Purchaser must return
Product to an authorized phone service facility in an adequate
container for shipping, accompanied by Purchaser’s sales receipt or
comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers’ name and address. To obtain
156
assistance on where to deliver the Product, call Samsung Customer
Care at 1-800-SAMSUNG. Upon receipt, SAMSUNG will promptly
repair or replace the defective Product. SAMSUNG may, at
SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period of ninety
(90) days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on the
original Product or for 90 days, whichever is longer. All replaced parts,
components, boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product is not covered
by this Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
157
What Are The Limits On Samsung's Warranty/liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
L MITED TO:
• THE MERCHANTAB LITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANT ES OF TITLE OR NON- NFR NGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSH P OF THE PRODUCT OR THE COMPONENTS
CONTAINED THERE N; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQU REMENTS OF ANY
LAW, RULE, SPEC FICATION OR CONTRACT PERTA NING THERETO.
NOTHING CONTA NED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANT ES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUD NG IF APPLICABLE THE MPLIED WARRANT ES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF T ME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO NOT ALLOW
L MITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULT NG
158
FROM THE PURCHASE, USE, OR MISUSE OF, OR NABILITY TO USE THE
PRODUCT OR ARIS NG DIRECTLY OR IND RECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, NCLUDING NCIDENTAL, SPECIAL,
CONSEQUENTIAL OR S M LAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARIS NG FROM ANY TORT
(INCLUD NG NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
BREACH OF CONTRACT OR FOR ANY CLA M BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INC DENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. F ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL LLEGALITY OR UNENFORCEAB LITY SHALL
NOT AFFECT THE ENFORCEABILITY FOR THE REMA NDER OF THIS
LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
W LL ALWAYS BE CONSTRUED TO BE L MITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE TH RDPARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
159
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY, CAPAB LITIES, OPERATIONS,
PERFORMANCE OR SUITAB LITY OF ANY TH RD-PARTY SOFTWARE OR
EQU PMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQU PMENT IS NCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, NCLUDING THE ABILITY TO INTEGRATE
ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE
QUALITY, CAPABILIT ES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH TH RD-PARTY SOFTWARE OR EQU PMENT
L E SOLELY WITH THE PURCHASER AND THE D RECT VENDOR, OWNER
OR SUPPL ER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS
THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUN G's Product pricing reflects this allocation of risk
and the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional warranties binding
on SAMSUNG. Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Electronics Canada, Inc.
©2011 Samsung Electronics Canada Inc. Samsung is a registered trademark
of Samsung Electronics Co. Ltd. and its related entities.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
160
Index
A
Accessing a Menu Function 17
Adding a New Contact
Adding More Fields 104
Deleting Fields 104
During a Call 105
Idle Screen 103
Alarms 82
setting up auto power-up alarm 83
Application Settings
Calendar 141
Reset 128
Applications
Alarms 82
Calendar 49 84
Memo 86
Using the Camcorder 64
Using the Camera 58
World Clock 88
Auto Delete Inbox 43
,
B
Back key 12
Battery
charging 5
Installing 3
161
Low Battery Indicator 6
Bluetooth 132
Activation 132
Discoverable mode 133
My Bluetooth Info 134
My Devices 133
Bluetooth Device
Stereo 75
Bookmarks 55
Browser
Clear cache 56
cookies 56
Enter URL 54
Entering text 53
History 56
Home 52
Preferences 57
Saved pages 56
Settings 56
Business Card
attaching to a message 40
,
C
Calendar 49 84
Deleting an Event 51
Viewing an Event 50
Call Functions 25
3-Way Calling (Multi-Party Calling) 37
Address Book 27
162
Answering a Call 28
Call Time 35
Call Waiting 36
Correcting the Number 26
Data Counter 36
Deleting Missed Call 35
Dialing a Recent Number 26
Ending a Call 26
International Call 25
Making a Call 25
Manual Pause Dialing 25
Recent Calls 32
Searching for a Number in Address Book 32
Send Message to Missed Call 34
Using the Speakerphone 31
Viewing All Calls 32
Viewing Missed Calls 33
Call Waiting 36
Camcorder 64
Accessing the Video Folder 66
Options after a Video is Taken 66
Shooting Video 64
Camcorder Options 65
Camera
Accessing the Pictures Folder 62
Camera Options 59
Picture Folder 62
Taking Pictures 58
163
Camera key 10
Changing Your Settings 115
Charging battery 5
Clear Phone Memory 142
Connectivity
Configuring Your Network Profiles 137
Contact Settings 102
Contacts
Adding a New Contact 103
Adding Pauses to Contact Numbers 106
Assigning an Image 63
Copying Entry to Phone 113
Copying Entry to SIM Card 112
Deleting an Address Book entry 113
Dialing a Number 106
FDN (Fixed Dialing Number) Mode 108
Finding an Address Book Entry 107
Group Settings 109
Managing Contact Entries 112
Own Phone Number 108
Service Dialing Numbers 111
Using Contacts List 106
D
Delete by Folder 48
Dialing Display
Background Colour 120
Font Colour 120
Font Size 119
164
Font Type 119
Display
Front Display 120
icons 14
Light Settings 121
Main Display 119
Downloaded images 93
Drafts 42
E
Editing a Photo 62
Entering Text 19
Using Alphabet Input Method 23
Using Numeric Input Method 24
Using Predictive Text 21
Using Symbols Input Method 24
F
FDN
Changing the Status 108
Creating New Numbers 109
Front Display
Greeting Message 121
Wallpaper 120
G
Games and Apps 98
Getting Started 1
Setting Up Your Phone 1
Voice mail 7
165
Group
Adding an Entry 110
Creating New Group 109
Removing an Entry 110
Renaming a group 111
H
Health and Safety Information 144
Hold call 29
I
Icons, description 14
Images 92
In-Call Options 30
International Call 25
L
Light Settings
Backlight Time 121
Brightness 121
M
Main Display Settings
Dialing Display 119
Greeting Message 120
Menu Style 119
Wallpaper 119
166
Memo 86
Memory Card Installation 4
Memory card port 10
Memory Management 142
Clear Phone Memory 142
Used Space 143
Menu Navigation 16
Using Shortcut Numbers 17
Messaging
Creating and Sending Text Messages 39
Settings 43
Types of Messages 38
Using Message Options 41
microSD card
Installing 4
Missed calls 33
Multi-Party Calling 37
Multitasking 76
Functions 18
Multitasking key 12
Music
Playing Music while Using the Phone 76
Music Player 73
Settings 140
Music Player key 12
Mute 31
My Downloads
Games and Apps 98
167
Images 92
Music 91
Other Files 99
Sounds 94
Videos 98
N
Navigation keys 13
Network Profile
Configuration 137
Network Selection 136
O
OK/Confirm key 13
Other Files 99
Outbox 42
Own Number 25
P
Phone
icons 14
Own Number 124
Shortcuts 123
Side View 9
Switching On/Off 7
Phone Settings 123
Photos
Accessing pictures 91
Deleting pictures 69
168
Playing Music Through a Stereo Bluetooth Device 75
Playlists 77
Adding songs to a Playlist 77
Creating a Playlist 77
Removing songs from a Playlist 78
Powering
Off 7
On 7
R
Recent Calls 32
Record Audio 81
Remote SIM Mode 135
Reset Phone 128
Restore Phone 128
Ringtones
get new 94
S
Security 124
Change Phone Password 127
Change PIN Code 127
Change PIN2 Code 127
Check PIN Code 125
Lock Phone 124
Lock SIM Card 125
Set FDN Mode 126
169
Service Dialing Numbers 111
Set FDN Mode 126
Settings
Applications 139
Call Settings 130
Contacts 102
Display 119
Music Player 140
Phone 123
Record Audio 141
Sound 115
Time and Date 121
Silent Profile key 12
SIM card
installation 2
Installing 2
Soft key 11
Sound Profile
Driving 115
Outdoor 115
Silent 115
170
Sounds 94
Speakerphone Key 31
Specific Absorption Rates (SAR) 153
Speed Dial 27 111
Standard Limited Warranty 155
,
T
T9 Mode
Add a New Word 22
Enter a word 22
T-Coil Mode 129
Text Input Method
ABC (Alphabetic) Input Method (abc, Abc, and ABC) 19
Changing 19
Numeric 20
Symbols 20
T9 mode 20
Time and Date 121
Tip Calculator 87
Tools 73
Alarms 82
Calculator 86
Calendar 49 84
Camera 58
Converter 87
Record Audio 81
Stopwatch 90
Tasks 84
Timer 90
,
171
World Clock 88
Travel Adapter 5
Using 5
U
Understanding Your Phone 9
Features of Your Phone 9
Front View 11
Side Views 9
V
Voice list 96
Voice Mail
Accessing 8
From Another Phone 8
Setup 7
Voice Recognition 78
Voice recorder 97
Voicemail key 12
Volume keys 9
W
Wallpaper
Assigning and IMage 64
Wallpapers 92
Warranty Information 155
World Clock 88
Deleting an Entry 89
172
Download PDF

advertising